1182 files changed, 40268 insertions, 24261 deletions

diff --git a/arch/Kconfig b/arch/Kconfig
index 48b5e103bdb0..98de654b79b3 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -393,18 +393,23 @@ config HAVE_ARCH_JUMP_LABEL
 config HAVE_ARCH_JUMP_LABEL_RELATIVE
 	bool
 
-config HAVE_RCU_TABLE_FREE
+config MMU_GATHER_TABLE_FREE
 	bool
 
-config HAVE_RCU_TABLE_NO_INVALIDATE
+config MMU_GATHER_RCU_TABLE_FREE
 	bool
+	select MMU_GATHER_TABLE_FREE
 
-config HAVE_MMU_GATHER_PAGE_SIZE
+config MMU_GATHER_PAGE_SIZE
 	bool
 
-config HAVE_MMU_GATHER_NO_GATHER
+config MMU_GATHER_NO_RANGE
 	bool
 
+config MMU_GATHER_NO_GATHER
+	bool
+	depends on MMU_GATHER_TABLE_FREE
+
 config ARCH_HAVE_NMI_SAFE_CMPXCHG
 	bool
 
diff --git a/arch/alpha/kernel/setup.c b/arch/alpha/kernel/setup.c
index 5d4c76a77a9f..f19aa577354b 100644
--- a/arch/alpha/kernel/setup.c
+++ b/arch/alpha/kernel/setup.c
@@ -655,8 +655,6 @@ setup_arch(char **cmdline_p)
 #ifdef CONFIG_VT
 #if defined(CONFIG_VGA_CONSOLE)
 	conswitchp = &vga_con;
-#elif defined(CONFIG_DUMMY_CONSOLE)
-	conswitchp = &dummy_con;
 #endif
 #endif
 
diff --git a/arch/alpha/kernel/srm_env.c b/arch/alpha/kernel/srm_env.c
index 7268222cf4e1..528d2be58182 100644
--- a/arch/alpha/kernel/srm_env.c
+++ b/arch/alpha/kernel/srm_env.c
@@ -119,13 +119,12 @@ static ssize_t srm_env_proc_write(struct file *file, const char __user *buffer,
 	return res;
 }
 
-static const struct file_operations srm_env_proc_fops = {
-	.owner		= THIS_MODULE,
-	.open		= srm_env_proc_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-	.write		= srm_env_proc_write,
+static const struct proc_ops srm_env_proc_ops = {
+	.proc_open	= srm_env_proc_open,
+	.proc_read	= seq_read,
+	.proc_lseek	= seq_lseek,
+	.proc_release	= single_release,
+	.proc_write	= srm_env_proc_write,
 };
 
 static int __init
@@ -182,7 +181,7 @@ srm_env_init(void)
 	entry = srm_named_entries;
 	while (entry->name && entry->id) {
 		if (!proc_create_data(entry->name, 0644, named_dir,
-			     &srm_env_proc_fops, (void *)entry->id))
+			     &srm_env_proc_ops, (void *)entry->id))
 			goto cleanup;
 		entry++;
 	}
@@ -194,7 +193,7 @@ srm_env_init(void)
 		char name[4];
 		sprintf(name, "%ld", var_num);
 		if (!proc_create_data(name, 0644, numbered_dir,
-			     &srm_env_proc_fops, (void *)var_num))
+			     &srm_env_proc_ops, (void *)var_num))
 			goto cleanup;
 	}
 
diff --git a/arch/alpha/kernel/syscalls/syscall.tbl b/arch/alpha/kernel/syscalls/syscall.tbl
index 8e13b0b2928d..36d42da7466a 100644
--- a/arch/alpha/kernel/syscalls/syscall.tbl
+++ b/arch/alpha/kernel/syscalls/syscall.tbl
@@ -475,3 +475,5 @@
 543	common	fspick				sys_fspick
 544	common	pidfd_open			sys_pidfd_open
 # 545 reserved for clone3
+547	common	openat2				sys_openat2
+548	common	pidfd_getfd			sys_pidfd_getfd
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
index 5f448201955b..ff2a393b635c 100644
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -28,6 +28,7 @@ config ARC
 	select GENERIC_SMP_IDLE_THREAD
 	select HAVE_ARCH_KGDB
 	select HAVE_ARCH_TRACEHOOK
+	select HAVE_COPY_THREAD_TLS
 	select HAVE_DEBUG_STACKOVERFLOW
 	select HAVE_DEBUG_KMEMLEAK
 	select HAVE_FUTEX_CMPXCHG if FUTEX
@@ -350,9 +351,8 @@ config NODES_SHIFT
 	  Accessing memory beyond 1GB (with or w/o PAE) requires 2 memory
 	  zones.
 
-if ISA_ARCOMPACT
-
 config ARC_COMPACT_IRQ_LEVELS
+	depends on ISA_ARCOMPACT
 	bool "Setup Timer IRQ as high Priority"
 	# if SMP, LV2 enabled ONLY if ARC implementation has LV2 re-entrancy
 	depends on !SMP
@@ -360,14 +360,10 @@ config ARC_COMPACT_IRQ_LEVELS
 config ARC_FPU_SAVE_RESTORE
 	bool "Enable FPU state persistence across context switch"
 	help
-	  Double Precision Floating Point unit had dedicated regs which
-	  need to be saved/restored across context-switch.
-	  Note that ARC FPU is overly simplistic, unlike say x86, which has
-	  hardware pieces to allow software to conditionally save/restore,
-	  based on actual usage of FPU by a task. Thus our implemn does
-	  this for all tasks in system.
-
-endif #ISA_ARCOMPACT
+	  ARCompact FPU has internal registers to assist with Double precision
+	  Floating Point operations. There are control and stauts registers
+	  for floating point exceptions and rounding modes. These are
+	  preserved across task context switch when enabled.
 
 config ARC_CANT_LLSC
 	def_bool n
diff --git a/arch/arc/boot/dts/axs10x_mb.dtsi b/arch/arc/boot/dts/axs10x_mb.dtsi
index f9a5c9ddcae7..1d109b06e7d8 100644
--- a/arch/arc/boot/dts/axs10x_mb.dtsi
+++ b/arch/arc/boot/dts/axs10x_mb.dtsi
@@ -78,6 +78,7 @@
 			interrupt-names = "macirq";
 			phy-mode = "rgmii";
 			snps,pbl = < 32 >;
+			snps,multicast-filter-bins = <256>;
 			clocks = <&apbclk>;
 			clock-names = "stmmaceth";
 			max-speed = <100>;
diff --git a/arch/arc/include/asm/arcregs.h b/arch/arc/include/asm/arcregs.h
index 5134f0baf33c..f7e432448e4b 100644
--- a/arch/arc/include/asm/arcregs.h
+++ b/arch/arc/include/asm/arcregs.h
@@ -39,6 +39,8 @@
 #define ARC_REG_CLUSTER_BCR	0xcf
 #define ARC_REG_AUX_ICCM	0x208	/* ICCM Base Addr (ARCv2) */
 #define ARC_REG_LPB_CTRL	0x488	/* ARCv2 Loop Buffer control */
+#define ARC_REG_FPU_CTRL	0x300
+#define ARC_REG_FPU_STATUS	0x301
 
 /* Common for ARCompact and ARCv2 status register */
 #define ARC_REG_STATUS32	0x0A
diff --git a/arch/arc/include/asm/fpu.h b/arch/arc/include/asm/fpu.h
new file mode 100644
index 000000000000..64347250fdf5
--- /dev/null
+++ b/arch/arc/include/asm/fpu.h
@@ -0,0 +1,55 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2020 Synopsys, Inc. (www.synopsys.com)
+ *
+ */
+
+#ifndef _ASM_ARC_FPU_H
+#define _ASM_ARC_FPU_H
+
+#ifdef CONFIG_ARC_FPU_SAVE_RESTORE
+
+#include <asm/ptrace.h>
+
+#ifdef CONFIG_ISA_ARCOMPACT
+
+/* These DPFP regs need to be saved/restored across ctx-sw */
+struct arc_fpu {
+	struct {
+		unsigned int l, h;
+	} aux_dpfp[2];
+};
+
+#define fpu_init_task(regs)
+
+#else
+
+/*
+ * ARCv2 FPU Control aux register
+ *   - bits to enable Traps on Exceptions
+ *   - Rounding mode
+ *
+ * ARCv2 FPU Status aux register
+ *   - FPU exceptions flags (Inv, Div-by-Zero, overflow, underflow, inexact)
+ *   - Flag Write Enable to clear flags explicitly (vs. by fpu instructions
+ *     only
+ */
+
+struct arc_fpu {
+	unsigned int ctrl, status;
+};
+
+extern void fpu_init_task(struct pt_regs *regs);
+
+#endif	/* !CONFIG_ISA_ARCOMPACT */
+
+extern void fpu_save_restore(struct task_struct *p, struct task_struct *n);
+
+#else	/* !CONFIG_ARC_FPU_SAVE_RESTORE */
+
+#define fpu_save_restore(p, n)
+#define fpu_init_task(regs)
+
+#endif	/* CONFIG_ARC_FPU_SAVE_RESTORE */
+
+#endif	/* _ASM_ARC_FPU_H */
diff --git a/arch/arc/include/asm/pgtable.h b/arch/arc/include/asm/pgtable.h
index 9019ed9f9c94..12be7e1b7cc0 100644
--- a/arch/arc/include/asm/pgtable.h
+++ b/arch/arc/include/asm/pgtable.h
@@ -273,6 +273,7 @@ static inline void pmd_set(pmd_t *pmdp, pte_t *ptep)
 #define pmd_none(x)			(!pmd_val(x))
 #define	pmd_bad(x)			((pmd_val(x) & ~PAGE_MASK))
 #define pmd_present(x)			(pmd_val(x))
+#define pmd_leaf(x)			(pmd_val(x) & _PAGE_HW_SZ)
 #define pmd_clear(xp)			do { pmd_val(*(xp)) = 0; } while (0)
 
 #define pte_page(pte)		pfn_to_page(pte_pfn(pte))
diff --git a/arch/arc/include/asm/processor.h b/arch/arc/include/asm/processor.h
index 706edeaa5583..ec532d1e0725 100644
--- a/arch/arc/include/asm/processor.h
+++ b/arch/arc/include/asm/processor.h
@@ -14,15 +14,7 @@
 #ifndef __ASSEMBLY__
 
 #include <asm/ptrace.h>
-
-#ifdef CONFIG_ARC_FPU_SAVE_RESTORE
-/* These DPFP regs need to be saved/restored across ctx-sw */
-struct arc_fpu {
-	struct {
-		unsigned int l, h;
-	} aux_dpfp[2];
-};
-#endif
+#include <asm/fpu.h>
 
 #ifdef CONFIG_ARC_PLAT_EZNPS
 struct eznps_dp {
diff --git a/arch/arc/include/asm/switch_to.h b/arch/arc/include/asm/switch_to.h
index 77f123385e96..aadf65b2b56c 100644
--- a/arch/arc/include/asm/switch_to.h
+++ b/arch/arc/include/asm/switch_to.h
@@ -9,19 +9,7 @@
 #ifndef __ASSEMBLY__
 
 #include <linux/sched.h>
-
-#ifdef CONFIG_ARC_FPU_SAVE_RESTORE
-
-extern void fpu_save_restore(struct task_struct *p, struct task_struct *n);
-#define ARC_FPU_PREV(p, n)	fpu_save_restore(p, n)
-#define ARC_FPU_NEXT(t)
-
-#else
-
-#define ARC_FPU_PREV(p, n)
-#define ARC_FPU_NEXT(n)
-
-#endif /* !CONFIG_ARC_FPU_SAVE_RESTORE */
+#include <asm/fpu.h>
 
 #ifdef CONFIG_ARC_PLAT_EZNPS
 extern void dp_save_restore(struct task_struct *p, struct task_struct *n);
@@ -36,9 +24,8 @@ struct task_struct *__switch_to(struct task_struct *p, struct task_struct *n);
 #define switch_to(prev, next, last)	\
 do {					\
 	ARC_EZNPS_DP_PREV(prev, next);	\
-	ARC_FPU_PREV(prev, next);	\
+	fpu_save_restore(prev, next);	\
 	last = __switch_to(prev, next);\
-	ARC_FPU_NEXT(next);		\
 	mb();				\
 } while (0)
 
diff --git a/arch/arc/include/asm/syscalls.h b/arch/arc/include/asm/syscalls.h
index 7ddba13e9b59..c3f4714a4f5c 100644
--- a/arch/arc/include/asm/syscalls.h
+++ b/arch/arc/include/asm/syscalls.h
@@ -11,6 +11,7 @@
 #include <linux/types.h>
 
 int sys_clone_wrapper(int, int, int, int, int);
+int sys_clone3_wrapper(void *, size_t);
 int sys_cacheflush(uint32_t, uint32_t uint32_t);
 int sys_arc_settls(void *);
 int sys_arc_gettls(void);
diff --git a/arch/arc/include/uapi/asm/unistd.h b/arch/arc/include/uapi/asm/unistd.h
index 5eafa1115162..fa2713ae6bea 100644
--- a/arch/arc/include/uapi/asm/unistd.h
+++ b/arch/arc/include/uapi/asm/unistd.h
@@ -21,6 +21,7 @@
 #define __ARCH_WANT_SET_GET_RLIMIT
 #define __ARCH_WANT_SYS_EXECVE
 #define __ARCH_WANT_SYS_CLONE
+#define __ARCH_WANT_SYS_CLONE3
 #define __ARCH_WANT_SYS_VFORK
 #define __ARCH_WANT_SYS_FORK
 #define __ARCH_WANT_TIME32_SYSCALLS
diff --git a/arch/arc/kernel/Makefile b/arch/arc/kernel/Makefile
index e784f5396dda..75539670431a 100644
--- a/arch/arc/kernel/Makefile
+++ b/arch/arc/kernel/Makefile
@@ -23,7 +23,9 @@ obj-$(CONFIG_PERF_EVENTS)		+= perf_event.o
 obj-$(CONFIG_JUMP_LABEL)		+= jump_label.o
 
 obj-$(CONFIG_ARC_FPU_SAVE_RESTORE)	+= fpu.o
+ifdef CONFIG_ISA_ARCOMPACT
 CFLAGS_fpu.o   += -mdpfp
+endif
 
 ifdef CONFIG_ARC_DW2_UNWIND
 CFLAGS_ctx_sw.o += -fno-omit-frame-pointer
diff --git a/arch/arc/kernel/entry.S b/arch/arc/kernel/entry.S
index 1f6bb184a44d..60406ec62eb8 100644
--- a/arch/arc/kernel/entry.S
+++ b/arch/arc/kernel/entry.S
@@ -35,6 +35,18 @@ ENTRY(sys_clone_wrapper)
 	b .Lret_from_system_call
 END(sys_clone_wrapper)
 
+ENTRY(sys_clone3_wrapper)
+	SAVE_CALLEE_SAVED_USER
+	bl  @sys_clone3
+	DISCARD_CALLEE_SAVED_USER
+
+	GET_CURR_THR_INFO_FLAGS   r10
+	btst r10, TIF_SYSCALL_TRACE
+	bnz  tracesys_exit
+
+	b .Lret_from_system_call
+END(sys_clone3_wrapper)
+
 ENTRY(ret_from_fork)
 	; when the forked child comes here from the __switch_to function
 	; r0 has the last task pointer.
diff --git a/arch/arc/kernel/fpu.c b/arch/arc/kernel/fpu.c
index 07e22b563fbb..c67c0f0f5f77 100644
--- a/arch/arc/kernel/fpu.c
+++ b/arch/arc/kernel/fpu.c
@@ -6,7 +6,9 @@
  */
 
 #include <linux/sched.h>
-#include <asm/switch_to.h>
+#include <asm/fpu.h>
+
+#ifdef CONFIG_ISA_ARCOMPACT
 
 /*
  * To save/restore FPU regs, simplest scheme would use LR/SR insns.
@@ -50,3 +52,28 @@ void fpu_save_restore(struct task_struct *prev, struct task_struct *next)
 		: "r" (zero), "r" (*(readfrom + 3)), "r" (*(readfrom + 2))
 	);
 }
+
+#else
+
+void fpu_init_task(struct pt_regs *regs)
+{
+	/* default rounding mode */
+	write_aux_reg(ARC_REG_FPU_CTRL, 0x100);
+
+	/* set "Write enable" to allow explicit write to exception flags */
+	write_aux_reg(ARC_REG_FPU_STATUS, 0x80000000);
+}
+
+void fpu_save_restore(struct task_struct *prev, struct task_struct *next)
+{
+	struct arc_fpu *save = &prev->thread.fpu;
+	struct arc_fpu *restore = &next->thread.fpu;
+
+	save->ctrl = read_aux_reg(ARC_REG_FPU_CTRL);
+	save->status = read_aux_reg(ARC_REG_FPU_STATUS);
+
+	write_aux_reg(ARC_REG_FPU_CTRL, restore->ctrl);
+	write_aux_reg(ARC_REG_FPU_STATUS, restore->status);
+}
+
+#endif
diff --git a/arch/arc/kernel/process.c b/arch/arc/kernel/process.c
index e1889ce3faf9..315528f04bc1 100644
--- a/arch/arc/kernel/process.c
+++ b/arch/arc/kernel/process.c
@@ -20,6 +20,8 @@
 #include <linux/elf.h>
 #include <linux/tick.h>
 
+#include <asm/fpu.h>
+
 SYSCALL_DEFINE1(arc_settls, void *, user_tls_data_ptr)
 {
 	task_thread_info(current)->thr_ptr = (unsigned int)user_tls_data_ptr;
@@ -171,9 +173,8 @@ asmlinkage void ret_from_fork(void);
  * |    user_r25    |
  * ------------------  <===== END of PAGE
  */
-int copy_thread(unsigned long clone_flags,
-		unsigned long usp, unsigned long kthread_arg,
-		struct task_struct *p)
+int copy_thread_tls(unsigned long clone_flags, unsigned long usp,
+	unsigned long kthread_arg, struct task_struct *p, unsigned long tls)
 {
 	struct pt_regs *c_regs;        /* child's pt_regs */
 	unsigned long *childksp;       /* to unwind out of __switch_to() */
@@ -231,7 +232,7 @@ int copy_thread(unsigned long clone_flags,
 		 * set task's userland tls data ptr from 4th arg
 		 * clone C-lib call is difft from clone sys-call
 		 */
-		task_thread_info(p)->thr_ptr = regs->r3;
+		task_thread_info(p)->thr_ptr = tls;
 	} else {
 		/* Normal fork case: set parent's TLS ptr in child */
 		task_thread_info(p)->thr_ptr =
@@ -264,7 +265,7 @@ int copy_thread(unsigned long clone_flags,
 /*
  * Do necessary setup to start up a new user task
  */
-void start_thread(struct pt_regs * regs, unsigned long pc, unsigned long usp)
+void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long usp)
 {
 	regs->sp = usp;
 	regs->ret = pc;
@@ -280,6 +281,8 @@ void start_thread(struct pt_regs * regs, unsigned long pc, unsigned long usp)
 	regs->eflags = 0;
 #endif
 
+	fpu_init_task(regs);
+
 	/* bogus seed values for debugging */
 	regs->lp_start = 0x10;
 	regs->lp_end = 0x80;
diff --git a/arch/arc/kernel/setup.c b/arch/arc/kernel/setup.c
index 7ee89dc61f6e..e1c647490f00 100644
--- a/arch/arc/kernel/setup.c
+++ b/arch/arc/kernel/setup.c
@@ -572,10 +572,6 @@ void __init setup_arch(char **cmdline_p)
 	 */
 	root_mountflags &= ~MS_RDONLY;
 
-#if defined(CONFIG_VT) && defined(CONFIG_DUMMY_CONSOLE)
-	conswitchp = &dummy_con;
-#endif
-
 	arc_unwind_init();
 }
 
diff --git a/arch/arc/kernel/sys.c b/arch/arc/kernel/sys.c
index fddecc76efb7..1069446bdc58 100644
--- a/arch/arc/kernel/sys.c
+++ b/arch/arc/kernel/sys.c
@@ -7,6 +7,7 @@
 #include <asm/syscalls.h>
 
 #define sys_clone	sys_clone_wrapper
+#define sys_clone3	sys_clone3_wrapper
 
 #undef __SYSCALL
 #define __SYSCALL(nr, call) [nr] = (call),
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 0b1b1c66bce9..97864aabc2a6 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -74,7 +74,7 @@ config ARM
 	select HAVE_CONTEXT_TRACKING
 	select HAVE_COPY_THREAD_TLS
 	select HAVE_C_RECORDMCOUNT
-	select HAVE_DEBUG_KMEMLEAK
+	select HAVE_DEBUG_KMEMLEAK if !XIP_KERNEL
 	select HAVE_DMA_CONTIGUOUS if MMU
 	select HAVE_DYNAMIC_FTRACE if !XIP_KERNEL && !CPU_ENDIAN_BE32 && MMU
 	select HAVE_DYNAMIC_FTRACE_WITH_REGS if HAVE_DYNAMIC_FTRACE
@@ -102,7 +102,7 @@ config ARM
 	select HAVE_PERF_EVENTS
 	select HAVE_PERF_REGS
 	select HAVE_PERF_USER_STACK_DUMP
-	select HAVE_RCU_TABLE_FREE if SMP && ARM_LPAE
+	select MMU_GATHER_RCU_TABLE_FREE if SMP && ARM_LPAE
 	select HAVE_REGS_AND_STACK_ACCESS_API
 	select HAVE_RSEQ
 	select HAVE_STACKPROTECTOR
@@ -1905,7 +1905,7 @@ config XIP_DEFLATED_DATA
 config KEXEC
 	bool "Kexec system call (EXPERIMENTAL)"
 	depends on (!SMP || PM_SLEEP_SMP)
-	depends on !CPU_V7M
+	depends on MMU
 	select KEXEC_CORE
 	help
 	  kexec is a system call that implements the ability to shutdown your
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 8bcbd0cd739b..b70d7debf5ca 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -147,14 +147,14 @@ choice
 		    0x80024000      | 0xf0024000     | UART9
 
 	config DEBUG_AT91_RM9200_DBGU
-		bool "Kernel low-level debugging on AT91RM9200, AT91SAM9 DBGU"
+		bool "Kernel low-level debugging on AT91RM9200, AT91SAM9, SAM9X60 DBGU"
 		select DEBUG_AT91_UART
-		depends on SOC_AT91RM9200 || SOC_AT91SAM9
+		depends on SOC_AT91RM9200 || SOC_AT91SAM9 || SOC_SAM9X60
 		help
 		  Say Y here if you want kernel low-level debugging support
 		  on the DBGU port of:
 		    at91rm9200, at91sam9260, at91sam9g20, at91sam9261,
-		    at91sam9g10, at91sam9n12, at91sam9rl64, at91sam9x5
+		    at91sam9g10, at91sam9n12, at91sam9rl64, at91sam9x5, sam9x60
 
 	config DEBUG_AT91_SAM9263_DBGU
 		bool "Kernel low-level debugging on AT91SAM{9263,9G45,A5D3} DBGU"
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index a1e883c5e5c4..da599c3a1193 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -110,12 +110,12 @@ endif
 
 # -fstack-protector-strong triggers protection checks in this code,
 # but it is being used too early to link to meaningful stack_chk logic.
-nossp_flags := $(call cc-option, -fno-stack-protector)
-CFLAGS_atags_to_fdt.o := $(nossp_flags)
-CFLAGS_fdt.o := $(nossp_flags)
-CFLAGS_fdt_ro.o := $(nossp_flags)
-CFLAGS_fdt_rw.o := $(nossp_flags)
-CFLAGS_fdt_wip.o := $(nossp_flags)
+nossp-flags-$(CONFIG_CC_HAS_STACKPROTECTOR_NONE) := -fno-stack-protector
+CFLAGS_atags_to_fdt.o := $(nossp-flags-y)
+CFLAGS_fdt.o := $(nossp-flags-y)
+CFLAGS_fdt_ro.o := $(nossp-flags-y)
+CFLAGS_fdt_rw.o := $(nossp-flags-y)
+CFLAGS_fdt_wip.o := $(nossp-flags-y)
 
 ccflags-y := -fpic $(call cc-option,-mno-single-pic-base,) -fno-builtin -I$(obj)
 asflags-y := -DZIMAGE
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index ead21e5f2b80..088b0a060876 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -140,6 +140,17 @@
 #endif
 		.endm
 
+		.macro	enable_cp15_barriers, reg
+		mrc	p15, 0, \reg, c1, c0, 0	@ read SCTLR
+		tst	\reg, #(1 << 5)		@ CP15BEN bit set?
+		bne	.L_\@
+		orr	\reg, \reg, #(1 << 5)	@ CP15 barrier instructions
+		mcr	p15, 0, \reg, c1, c0, 0	@ write SCTLR
+ ARM(		.inst   0xf57ff06f		@ v7+ isb	)
+ THUMB(		isb						)
+.L_\@:
+		.endm
+
 		.section ".start", "ax"
 /*
  * sort out different calling conventions
@@ -820,6 +831,7 @@ __armv4_mmu_cache_on:
 		mov	pc, r12
 
 __armv7_mmu_cache_on:
+		enable_cp15_barriers	r11
 		mov	r12, lr
 #ifdef CONFIG_MMU
 		mrc	p15, 0, r11, c0, c1, 4	@ read ID_MMFR0
@@ -1209,6 +1221,7 @@ __armv6_mmu_cache_flush:
 		mov	pc, lr
 
 __armv7_mmu_cache_flush:
+		enable_cp15_barriers	r10
 		tst	r4, #1
 		bne	iflush
 		mrc	p15, 0, r10, c0, c1, 5	@ read ID_MMFR1
@@ -1447,21 +1460,7 @@ ENTRY(efi_stub_entry)
 
 		@ Preserve return value of efi_entry() in r4
 		mov	r4, r0
-
-		@ our cache maintenance code relies on CP15 barrier instructions
-		@ but since we arrived here with the MMU and caches configured
-		@ by UEFI, we must check that the CP15BEN bit is set in SCTLR.
-		@ Note that this bit is RAO/WI on v6 and earlier, so the ISB in
-		@ the enable path will be executed on v7+ only.
-		mrc	p15, 0, r1, c1, c0, 0	@ read SCTLR
-		tst	r1, #(1 << 5)		@ CP15BEN bit set?
-		bne	0f
-		orr	r1, r1, #(1 << 5)	@ CP15 barrier instructions
-		mcr	p15, 0, r1, c1, c0, 0	@ write SCTLR
- ARM(		.inst	0xf57ff06f		@ v7+ isb	)
- THUMB(		isb						)
-
-0:		bl	cache_clean_flush
+		bl	cache_clean_flush
 		bl	cache_off
 
 		@ Set parameters for booting zImage according to boot protocol
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 08011dc8c7a6..d6546d2676b9 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -37,18 +37,24 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \
 	at91-ariag25.dtb \
 	at91-ariettag25.dtb \
 	at91-cosino_mega2560.dtb \
-	at91-kizboxmini.dtb \
+	at91-kizboxmini-base.dtb \
+	at91-kizboxmini-mb.dtb \
+	at91-kizboxmini-rd.dtb \
+	at91-smartkiz.dtb \
 	at91-wb45n.dtb \
 	at91sam9g15ek.dtb \
 	at91sam9g25ek.dtb \
 	at91sam9g35ek.dtb \
 	at91sam9x25ek.dtb \
 	at91sam9x35ek.dtb
+dtb-$(CONFIG_SOC_SAM9X60) += \
+	at91-sam9x60ek.dtb
 dtb-$(CONFIG_SOC_SAM_V7) += \
 	at91-kizbox2-2.dtb \
 	at91-kizbox3-hs.dtb \
 	at91-nattis-2-natte-2.dtb \
 	at91-sama5d27_som1_ek.dtb \
+	at91-sama5d27_wlsom1_ek.dtb \
 	at91-sama5d2_ptc_ek.dtb \
 	at91-sama5d2_xplained.dtb \
 	at91-sama5d3_xplained.dtb \
@@ -422,6 +428,10 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6dl-gw560x.dtb \
 	imx6dl-gw5903.dtb \
 	imx6dl-gw5904.dtb \
+	imx6dl-gw5907.dtb \
+	imx6dl-gw5910.dtb \
+	imx6dl-gw5912.dtb \
+	imx6dl-gw5913.dtb \
 	imx6dl-hummingboard.dtb \
 	imx6dl-hummingboard-emmc-som-v15.dtb \
 	imx6dl-hummingboard-som-v15.dtb \
@@ -493,6 +503,10 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6q-gw560x.dtb \
 	imx6q-gw5903.dtb \
 	imx6q-gw5904.dtb \
+	imx6q-gw5907.dtb \
+	imx6q-gw5910.dtb \
+	imx6q-gw5912.dtb \
+	imx6q-gw5913.dtb \
 	imx6q-h100.dtb \
 	imx6q-hummingboard.dtb \
 	imx6q-hummingboard-emmc-som-v15.dtb \
@@ -554,6 +568,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6qp-zii-rdu2.dtb
 dtb-$(CONFIG_SOC_IMX6SL) += \
 	imx6sl-evk.dtb \
+	imx6sl-tolino-shine3.dtb \
 	imx6sl-warp.dtb
 dtb-$(CONFIG_SOC_IMX6SLL) += \
 	imx6sll-evk.dtb \
@@ -612,6 +627,7 @@ dtb-$(CONFIG_SOC_IMX7D) += \
 	imx7s-mba7.dtb \
 	imx7s-warp.dtb
 dtb-$(CONFIG_SOC_IMX7ULP) += \
+	imx7ulp-com.dtb \
 	imx7ulp-evk.dtb
 dtb-$(CONFIG_SOC_LS1021A) += \
 	ls1021a-moxa-uc-8410a.dtb \
@@ -691,6 +707,7 @@ dtb-$(CONFIG_ARCH_OMAP3) += \
 	omap3-devkit8000.dtb \
 	omap3-devkit8000-lcd43.dtb \
 	omap3-devkit8000-lcd70.dtb \
+	omap3-echo.dtb \
 	omap3-evm.dtb \
 	omap3-evm-37xx.dtb \
 	omap3-gta04a3.dtb \
@@ -1129,6 +1146,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
 	sun8i-h3-orangepi-plus2e.dtb \
 	sun8i-h3-orangepi-zero-plus2.dtb \
 	sun8i-h3-rervision-dvk.dtb \
+	sun8i-h3-emlid-neutis-n5h3-devboard.dtb \
 	sun8i-r16-bananapi-m2m.dtb \
 	sun8i-r16-nintendo-nes-classic.dtb \
 	sun8i-r16-nintendo-super-nes-classic.dtb \
@@ -1182,7 +1200,9 @@ dtb-$(CONFIG_ARCH_U8500) += \
 	ste-hrefprev60-stuib.dtb \
 	ste-hrefprev60-tvk.dtb \
 	ste-hrefv60plus-stuib.dtb \
-	ste-hrefv60plus-tvk.dtb
+	ste-hrefv60plus-tvk.dtb \
+	ste-href520-tvk.dtb \
+	ste-ux500-samsung-golden.dtb
 dtb-$(CONFIG_ARCH_UNIPHIER) += \
 	uniphier-ld4-ref.dtb \
 	uniphier-ld6b-ref.dtb \
@@ -1238,6 +1258,8 @@ dtb-$(CONFIG_MACH_ARMADA_370) += \
 dtb-$(CONFIG_MACH_ARMADA_375) += \
 	armada-375-db.dtb
 dtb-$(CONFIG_MACH_ARMADA_38X) += \
+	armada-385-clearfog-gtr-s4.dtb \
+	armada-385-clearfog-gtr-l8.dtb \
 	armada-385-db-88f6820-amc.dtb \
 	armada-385-db-ap.dtb \
 	armada-385-linksys-caiman.dtb \
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 6f0a6be93098..68252dab32c3 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -113,7 +113,7 @@
 		};
 	};
 
-	backlight {
+	backlight: backlight {
 		compatible = "pwm-backlight";
 		pwms = <&ecap0 0 50000 0>;
 		brightness-levels = <0 51 53 56 62 75 101 152 255>;
@@ -121,35 +121,15 @@
 	};
 
 	panel {
-		compatible = "ti,tilcdc,panel";
-		status = "okay";
+		compatible = "tfc,s9700rtwv43tr-01b";
+
 		pinctrl-names = "default";
 		pinctrl-0 = <&lcd_pins_s0>;
-		panel-info {
-			ac-bias           = <255>;
-			ac-bias-intrpt    = <0>;
-			dma-burst-sz      = <16>;
-			bpp               = <32>;
-			fdd               = <0x80>;
-			sync-edge         = <0>;
-			sync-ctrl         = <1>;
-			raster-order      = <0>;
-			fifo-th           = <0>;
-		};
+		backlight = <&backlight>;
 
-		display-timings {
-			800x480p62 {
-				clock-frequency = <30000000>;
-				hactive = <800>;
-				vactive = <480>;
-				hfront-porch = <39>;
-				hback-porch = <39>;
-				hsync-len = <47>;
-				vback-porch = <29>;
-				vfront-porch = <13>;
-				vsync-len = <2>;
-				hsync-active = <1>;
-				vsync-active = <1>;
+		port {
+			panel_0: endpoint@0 {
+				remote-endpoint = <&lcdc_0>;
 			};
 		};
 	};
@@ -500,6 +480,12 @@
 	status = "okay";
 
 	blue-and-red-wiring = "crossed";
+
+	port {
+		lcdc_0: endpoint@0 {
+			remote-endpoint = <&panel_0>;
+		};
+	};
 };
 
 &elm {
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index a97f9df460c1..32f515a295ee 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -183,36 +183,16 @@
 	};
 
 	panel {
-		compatible = "ti,tilcdc,panel";
+		compatible = "newhaven,nhd-4.3-480272ef-atxl";
+
 		pinctrl-names = "default", "sleep";
 		pinctrl-0 = <&lcd_pins_default>;
 		pinctrl-1 = <&lcd_pins_sleep>;
 		backlight = <&lcd_bl>;
-		status = "okay";
-		panel-info {
-			ac-bias		= <255>;
-			ac-bias-intrpt	= <0>;
-			dma-burst-sz	= <16>;
-			bpp		= <32>;
-			fdd		= <0x80>;
-			sync-edge	= <0>;
-			sync-ctrl	= <1>;
-			raster-order	= <0>;
-			fifo-th		= <0>;
-		};
-		display-timings {
-			480x272 {
-				hactive		= <480>;
-				vactive		= <272>;
-				hback-porch	= <43>;
-				hfront-porch	= <8>;
-				hsync-len	= <4>;
-				vback-porch	= <12>;
-				vfront-porch	= <4>;
-				vsync-len	= <10>;
-				clock-frequency = <9000000>;
-				hsync-active	= <0>;
-				vsync-active	= <0>;
+
+		port {
+			panel_0: endpoint@0 {
+				remote-endpoint = <&lcdc_0>;
 			};
 		};
 	};
@@ -725,6 +705,12 @@
 	status = "okay";
 
 	blue-and-red-wiring = "crossed";
+
+	port {
+		lcdc_0: endpoint@0 {
+			remote-endpoint = <&panel_0>;
+		};
+	};
 };
 
 &rtc {
diff --git a/arch/arm/boot/dts/am335x-icev2.dts b/arch/arm/boot/dts/am335x-icev2.dts
index 204bccfcc110..021eb57261fe 100644
--- a/arch/arm/boot/dts/am335x-icev2.dts
+++ b/arch/arm/boot/dts/am335x-icev2.dts
@@ -287,6 +287,19 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
+
+	/* osd9616p0899-10 */
+	display@3c {
+		compatible = "solomon,ssd1306fb-i2c";
+		reg = <0x3c>;
+		solomon,height = <16>;
+		solomon,width = <96>;
+		solomon,com-seq;
+		solomon,com-invdir;
+		solomon,page-offset = <0>;
+		solomon,prechargep1 = <2>;
+		solomon,prechargep2 = <13>;
+	};
 };
 
 &spi0 {
diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi
index 3a8a205c27b5..4e2986f0c604 100644
--- a/arch/arm/boot/dts/am33xx-l4.dtsi
+++ b/arch/arm/boot/dts/am33xx-l4.dtsi
@@ -225,7 +225,6 @@
 
 		target-module@d000 {			/* 0x44e0d000, ap 20 38.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "adc_tsc";
 			reg = <0xd000 0x4>,
 			      <0xd010 0x4>;
 			reg-names = "rev", "sysc";
@@ -1009,7 +1008,6 @@
 
 		target-module@30000 {			/* 0x48030000, ap 77 08.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "spi0";
 			reg = <0x30000 0x4>,
 			      <0x30110 0x4>,
 			      <0x30114 0x4>;
@@ -1134,7 +1132,6 @@
 
 		target-module@42000 {			/* 0x48042000, ap 24 1c.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer3";
 			reg = <0x42000 0x4>,
 			      <0x42010 0x4>,
 			      <0x42014 0x4>;
@@ -1160,7 +1157,6 @@
 
 		target-module@44000 {			/* 0x48044000, ap 26 26.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer4";
 			reg = <0x44000 0x4>,
 			      <0x44010 0x4>,
 			      <0x44014 0x4>;
@@ -1187,7 +1183,6 @@
 
 		target-module@46000 {			/* 0x48046000, ap 28 28.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer5";
 			reg = <0x46000 0x4>,
 			      <0x46010 0x4>,
 			      <0x46014 0x4>;
@@ -1214,7 +1209,6 @@
 
 		target-module@48000 {			/* 0x48048000, ap 30 22.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer6";
 			reg = <0x48000 0x4>,
 			      <0x48010 0x4>,
 			      <0x48014 0x4>;
@@ -1241,7 +1235,6 @@
 
 		target-module@4a000 {			/* 0x4804a000, ap 85 60.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer7";
 			reg = <0x4a000 0x4>,
 			      <0x4a010 0x4>,
 			      <0x4a014 0x4>;
@@ -1344,7 +1337,6 @@
 
 		target-module@80000 {			/* 0x48080000, ap 38 18.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "elm";
 			reg = <0x80000 0x4>,
 			      <0x80010 0x4>,
 			      <0x80014 0x4>;
@@ -1412,7 +1404,6 @@
 
 		target-module@ca000 {			/* 0x480ca000, ap 91 40.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "spinlock";
 			reg = <0xca000 0x4>,
 			      <0xca010 0x4>,
 			      <0xca014 0x4>;
@@ -1533,7 +1524,6 @@
 
 		target-module@a0000 {			/* 0x481a0000, ap 79 24.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "spi1";
 			reg = <0xa0000 0x4>,
 			      <0xa0110 0x4>,
 			      <0xa0114 0x4>;
@@ -1749,7 +1739,6 @@
 			compatible = "ti,sysc-omap4", "ti,sysc";
 			reg = <0xcc020 0x4>;
 			reg-names = "rev";
-			ti,hwmods = "d_can0";
 			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
 			clocks = <&l4ls_clkctrl AM3_L4LS_D_CAN0_CLKCTRL 0>,
 				 <&dcan0_fck>;
@@ -1773,7 +1762,6 @@
 			compatible = "ti,sysc-omap4", "ti,sysc";
 			reg = <0xd0020 0x4>;
 			reg-names = "rev";
-			ti,hwmods = "d_can1";
 			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
 			clocks = <&l4ls_clkctrl AM3_L4LS_D_CAN1_CLKCTRL 0>,
 				 <&dcan1_fck>;
@@ -1863,7 +1851,6 @@
 
 		target-module@0 {			/* 0x48300000, ap 66 48.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "epwmss0";
 			reg = <0x0 0x4>,
 			      <0x4 0x4>;
 			reg-names = "rev", "sysc";
@@ -1916,7 +1903,6 @@
 
 		target-module@2000 {			/* 0x48302000, ap 68 52.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "epwmss1";
 			reg = <0x2000 0x4>,
 			      <0x2004 0x4>;
 			reg-names = "rev", "sysc";
@@ -1969,7 +1955,6 @@
 
 		target-module@4000 {			/* 0x48304000, ap 70 44.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "epwmss2";
 			reg = <0x4000 0x4>,
 			      <0x4004 0x4>;
 			reg-names = "rev", "sysc";
@@ -2022,7 +2007,6 @@
 
 		target-module@e000 {			/* 0x4830e000, ap 72 4a.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "lcdc";
 			reg = <0xe000 0x4>,
 			      <0xe054 0x4>;
 			reg-names = "rev", "sysc";
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 646f11430dad..41dcfb37155a 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -439,23 +439,87 @@
 			status = "disabled";
 		};
 
-		sham: sham@53100000 {
-			compatible = "ti,omap4-sham";
-			ti,hwmods = "sham";
-			reg = <0x53100000 0x200>;
-			interrupts = <109>;
-			dmas = <&edma 36 0>;
-			dma-names = "rx";
+		sham_target: target-module@53100000 {
+			compatible = "ti,sysc-omap3-sham", "ti,sysc";
+			reg = <0x53100100 0x4>,
+			      <0x53100110 0x4>,
+			      <0x53100114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l3_clkdm */
+			clocks = <&l3_clkctrl AM3_L3_SHAM_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x53100000 0x1000>;
+
+			sham: sham@0 {
+				compatible = "ti,omap4-sham";
+				reg = <0 0x200>;
+				interrupts = <109>;
+				dmas = <&edma 36 0>;
+				dma-names = "rx";
+			};
+		};
+
+		aes_target: target-module@53500000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x53500080 0x4>,
+			      <0x53500084 0x4>,
+			      <0x53500088 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l3_clkdm */
+			clocks = <&l3_clkctrl AM3_L3_AES_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x53500000 0x1000>;
+
+			aes: aes@0 {
+				compatible = "ti,omap4-aes";
+				reg = <0 0xa0>;
+				interrupts = <103>;
+				dmas = <&edma 6 0>,
+				       <&edma 5 0>;
+				dma-names = "tx", "rx";
+			};
 		};
 
-		aes: aes@53500000 {
-			compatible = "ti,omap4-aes";
-			ti,hwmods = "aes";
-			reg = <0x53500000 0xa0>;
-			interrupts = <103>;
-			dmas = <&edma 6 0>,
-			       <&edma 5 0>;
-			dma-names = "tx", "rx";
+		target-module@56000000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x5600fe00 0x4>,
+			      <0x5600fe10 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&gfx_l3_clkctrl AM3_GFX_L3_GFX_CLKCTRL 0>;
+			clock-names = "fck";
+			resets = <&prm_gfx 0>;
+			reset-names = "rstctrl";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x56000000 0x1000000>;
+
+			/*
+			 * Closed source PowerVR driver, no child device
+			 * binding or driver in mainline
+			 */
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi
index 125379ecab2f..e0b5a00e2078 100644
--- a/arch/arm/boot/dts/am3517.dtsi
+++ b/arch/arm/boot/dts/am3517.dtsi
@@ -74,7 +74,7 @@
 			clock-names = "ick";
 		};
 
-		davinci_mdio: ethernet@5c030000 {
+		davinci_mdio: mdio@5c030000 {
 			compatible = "ti,davinci_mdio";
 			ti,hwmods = "davinci_mdio";
 			status = "disabled";
diff --git a/arch/arm/boot/dts/am3703.dtsi b/arch/arm/boot/dts/am3703.dtsi
new file mode 100644
index 000000000000..2b994ae790c9
--- /dev/null
+++ b/arch/arm/boot/dts/am3703.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 André Hentschel <nerv@dawncrow.de>
+ */
+
+#include "omap36xx.dtsi"
+
+&iva {
+	status = "disabled";
+};
+
+&sgx_module {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/am3715.dtsi b/arch/arm/boot/dts/am3715.dtsi
new file mode 100644
index 000000000000..ab328e8c0bd8
--- /dev/null
+++ b/arch/arm/boot/dts/am3715.dtsi
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 André Hentschel <nerv@dawncrow.de>
+ */
+
+#include "omap36xx.dtsi"
+
+&iva {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index ca0aa3f26c0a..faa14dc0faff 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -256,33 +256,92 @@
 			};
 		};
 
-		sham: sham@53100000 {
-			compatible = "ti,omap5-sham";
-			ti,hwmods = "sham";
-			reg = <0x53100000 0x300>;
-			dmas = <&edma 36 0>;
-			dma-names = "rx";
-			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+		sham_target: target-module@53100000 {
+			compatible = "ti,sysc-omap3-sham", "ti,sysc";
+			reg = <0x53100100 0x4>,
+			      <0x53100110 0x4>,
+			      <0x53100114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l3_clkdm */
+			clocks = <&l3_clkctrl AM4_L3_SHAM_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x53100000 0x1000>;
+
+			sham: sham@0 {
+				compatible = "ti,omap5-sham";
+				reg = <0 0x300>;
+				dmas = <&edma 36 0>;
+				dma-names = "rx";
+				interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			};
 		};
 
-		aes: aes@53501000 {
-			compatible = "ti,omap4-aes";
-			ti,hwmods = "aes";
-			reg = <0x53501000 0xa0>;
-			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&edma 6 0>,
-				<&edma 5 0>;
-			dma-names = "tx", "rx";
+		aes_target: target-module@53501000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x53501080 0x4>,
+			      <0x53501084 0x4>,
+			      <0x53501088 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l3_clkdm */
+			clocks = <&l3_clkctrl AM4_L3_AES_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x53501000 0x1000>;
+
+			aes: aes@0 {
+				compatible = "ti,omap4-aes";
+				reg = <0 0xa0>;
+				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&edma 6 0>,
+				      <&edma 5 0>;
+				dma-names = "tx", "rx";
+			};
 		};
 
-		des: des@53701000 {
-			compatible = "ti,omap4-des";
-			ti,hwmods = "des";
-			reg = <0x53701000 0xa0>;
-			interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&edma 34 0>,
-				<&edma 33 0>;
-			dma-names = "tx", "rx";
+		des_target: target-module@53701000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x53701030 0x4>,
+			      <0x53701034 0x4>,
+			      <0x53701038 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l3_clkdm */
+			clocks = <&l3_clkctrl AM4_L3_DES_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x53701000 0x1000>;
+
+			des: des@0 {
+				compatible = "ti,omap4-des";
+				reg = <0 0xa0>;
+				interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&edma 34 0>,
+				       <&edma 33 0>;
+				dma-names = "tx", "rx";
+			};
 		};
 
 		gpmc: gpmc@50000000 {
@@ -305,17 +364,34 @@
 			status = "disabled";
 		};
 
-		qspi: spi@47900000 {
-			compatible = "ti,am4372-qspi";
-			reg = <0x47900000 0x100>,
-			      <0x30000000 0x4000000>;
-			reg-names = "qspi_base", "qspi_mmap";
+		target-module@47900000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x47900000 0x4>,
+			      <0x47900010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			clocks = <&l3s_clkctrl AM4_L3S_QSPI_CLKCTRL 0>;
+			clock-names = "fck";
 			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "qspi";
-			interrupts = <0 138 0x4>;
-			num-cs = <4>;
-			status = "disabled";
+			#size-cells = <1>;
+			ranges = <0x0 0x47900000 0x1000>,
+				 <0x30000000 0x30000000 0x4000000>;
+
+			qspi: spi@0 {
+				compatible = "ti,am4372-qspi";
+				reg = <0 0x100>,
+				      <0x30000000 0x4000000>;
+				reg-names = "qspi_base", "qspi_mmap";
+				clocks = <&dpll_per_m2_div4_ck>;
+				clock-names = "fck";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <0 138 0x4>;
+				num-cs = <4>;
+			};
 		};
 
 		dss: dss@4832a000 {
@@ -369,6 +445,26 @@
 				pool;
 			};
 		};
+
+		target-module@56000000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x5600fe00 0x4>,
+			      <0x5600fe10 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&gfx_l3_clkctrl AM4_GFX_L3_GFX_CLKCTRL 0>;
+			clock-names = "fck";
+			resets = <&prm_gfx 0>;
+			reset-names = "rstctrl";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x56000000 0x1000000>;
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/am437x-l4.dtsi b/arch/arm/boot/dts/am437x-l4.dtsi
index 0dd59ee14585..e18e17d31272 100644
--- a/arch/arm/boot/dts/am437x-l4.dtsi
+++ b/arch/arm/boot/dts/am437x-l4.dtsi
@@ -225,7 +225,6 @@
 
 		target-module@d000 {			/* 0x44e0d000, ap 20 38.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "adc_tsc";
 			reg = <0xd000 0x4>,
 			      <0xd010 0x4>;
 			reg-names = "rev", "sysc";
@@ -763,7 +762,6 @@
 
 		target-module@30000 {			/* 0x48030000, ap 65 08.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "spi0";
 			reg = <0x30000 0x4>,
 			      <0x30110 0x4>,
 			      <0x30114 0x4>;
@@ -900,7 +898,6 @@
 
 		target-module@42000 {			/* 0x48042000, ap 20 24.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer3";
 			reg = <0x42000 0x4>,
 			      <0x42010 0x4>,
 			      <0x42014 0x4>;
@@ -927,7 +924,6 @@
 
 		target-module@44000 {			/* 0x48044000, ap 22 26.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer4";
 			reg = <0x44000 0x4>,
 			      <0x44010 0x4>,
 			      <0x44014 0x4>;
@@ -955,7 +951,6 @@
 
 		target-module@46000 {			/* 0x48046000, ap 24 28.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer5";
 			reg = <0x46000 0x4>,
 			      <0x46010 0x4>,
 			      <0x46014 0x4>;
@@ -983,7 +978,6 @@
 
 		target-module@48000 {			/* 0x48048000, ap 26 1a.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer6";
 			reg = <0x48000 0x4>,
 			      <0x48010 0x4>,
 			      <0x48014 0x4>;
@@ -1011,7 +1005,6 @@
 
 		target-module@4a000 {			/* 0x4804a000, ap 71 48.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer7";
 			reg = <0x4a000 0x4>,
 			      <0x4a010 0x4>,
 			      <0x4a014 0x4>;
@@ -1107,7 +1100,6 @@
 
 		target-module@80000 {			/* 0x48080000, ap 32 18.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "elm";
 			reg = <0x80000 0x4>,
 			      <0x80010 0x4>,
 			      <0x80014 0x4>;
@@ -1169,7 +1161,6 @@
 
 		target-module@ca000 {			/* 0x480ca000, ap 77 38.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "spinlock";
 			reg = <0xca000 0x4>,
 			      <0xca010 0x4>,
 			      <0xca014 0x4>;
@@ -1282,7 +1273,6 @@
 
 		target-module@a0000 {			/* 0x481a0000, ap 67 2c.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "spi1";
 			reg = <0xa0000 0x4>,
 			      <0xa0110 0x4>,
 			      <0xa0114 0x4>;
@@ -1313,7 +1303,6 @@
 
 		target-module@a2000 {			/* 0x481a2000, ap 69 2e.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "spi2";
 			reg = <0xa2000 0x4>,
 			      <0xa2110 0x4>,
 			      <0xa2114 0x4>;
@@ -1344,7 +1333,6 @@
 
 		target-module@a4000 {			/* 0x481a4000, ap 92 62.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "spi3";
 			reg = <0xa4000 0x4>,
 			      <0xa4110 0x4>,
 			      <0xa4114 0x4>;
@@ -1527,7 +1515,6 @@
 
 		target-module@c1000 {			/* 0x481c1000, ap 94 68.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer8";
 			reg = <0xc1000 0x4>,
 			      <0xc1010 0x4>,
 			      <0xc1014 0x4>;
@@ -1556,7 +1543,6 @@
 			compatible = "ti,sysc-omap4", "ti,sysc";
 			reg = <0xcc020 0x4>;
 			reg-names = "rev";
-			ti,hwmods = "d_can0";
 			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
 			clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN0_CLKCTRL 0>;
 			clock-names = "fck";
@@ -1577,7 +1563,6 @@
 			compatible = "ti,sysc-omap4", "ti,sysc";
 			reg = <0xd0020 0x4>;
 			reg-names = "rev";
-			ti,hwmods = "d_can1";
 			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
 			clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN1_CLKCTRL 0>;
 			clock-names = "fck";
@@ -1695,7 +1680,6 @@
 
 		target-module@0 {			/* 0x48300000, ap 56 40.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "epwmss0";
 			reg = <0x0 0x4>,
 			      <0x4 0x4>;
 			reg-names = "rev", "sysc";
@@ -1748,7 +1732,6 @@
 
 		target-module@2000 {			/* 0x48302000, ap 58 4a.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "epwmss1";
 			reg = <0x2000 0x4>,
 			      <0x2004 0x4>;
 			reg-names = "rev", "sysc";
@@ -1801,7 +1784,6 @@
 
 		target-module@4000 {			/* 0x48304000, ap 60 44.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "epwmss2";
 			reg = <0x4000 0x4>,
 			      <0x4004 0x4>;
 			reg-names = "rev", "sysc";
@@ -1854,7 +1836,6 @@
 
 		target-module@6000 {			/* 0x48306000, ap 96 58.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "epwmss3";
 			reg = <0x6000 0x4>,
 			      <0x6004 0x4>;
 			reg-names = "rev", "sysc";
@@ -1896,7 +1877,6 @@
 
 		target-module@8000 {			/* 0x48308000, ap 98 54.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "epwmss4";
 			reg = <0x8000 0x4>,
 			      <0x8004 0x4>;
 			reg-names = "rev", "sysc";
@@ -1938,7 +1918,6 @@
 
 		target-module@a000 {			/* 0x4830a000, ap 100 60.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "epwmss5";
 			reg = <0xa000 0x4>,
 			      <0xa004 0x4>;
 			reg-names = "rev", "sysc";
@@ -2086,7 +2065,6 @@
 
 		target-module@26000 {			/* 0x48326000, ap 86 66.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "vpfe0";
 			reg = <0x26000 0x4>,
 			      <0x26104 0x4>;
 			reg-names = "rev", "sysc";
@@ -2113,7 +2091,6 @@
 
 		target-module@28000 {			/* 0x48328000, ap 75 0e.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "vpfe1";
 			reg = <0x28000 0x4>,
 			      <0x28104 0x4>;
 			reg-names = "rev", "sysc";
@@ -2162,7 +2139,6 @@
 
 		target-module@3d000 {			/* 0x4833d000, ap 102 6e.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer9";
 			reg = <0x3d000 0x4>,
 			      <0x3d010 0x4>,
 			      <0x3d014 0x4>;
@@ -2189,7 +2165,6 @@
 
 		target-module@3f000 {			/* 0x4833f000, ap 104 5c.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer10";
 			reg = <0x3f000 0x4>,
 			      <0x3f010 0x4>,
 			      <0x3f014 0x4>;
@@ -2216,7 +2191,6 @@
 
 		target-module@41000 {			/* 0x48341000, ap 106 76.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer11";
 			reg = <0x41000 0x4>,
 			      <0x41010 0x4>,
 			      <0x41014 0x4>;
@@ -2243,7 +2217,6 @@
 
 		target-module@45000 {			/* 0x48345000, ap 108 6a.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "spi4";
 			reg = <0x45000 0x4>,
 			      <0x45110 0x4>,
 			      <0x45114 0x4>;
@@ -2358,7 +2331,6 @@
 
 		target-module@a8000 {			/* 0x483a8000, ap 125 6c.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "ocp2scp0";
 			reg = <0xa8000 0x4>;
 			reg-names = "rev";
 			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
@@ -2440,7 +2412,6 @@
 
 		target-module@e8000 {			/* 0x483e8000, ap 129 78.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "ocp2scp1";
 			reg = <0xe8000 0x4>;
 			reg-names = "rev";
 			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts
index 74eaa6a3b258..25222497f828 100644
--- a/arch/arm/boot/dts/am437x-sk-evm.dts
+++ b/arch/arm/boot/dts/am437x-sk-evm.dts
@@ -272,6 +272,12 @@
 		>;
 	};
 
+	clkout1_pin: pinmux_clkout1_pin {
+		pinctrl-single,pins = <
+			0x270 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* XDMA_EVENT_INTR0/CLKOUT1 */
+		>;
+	};
+
 	cpsw_default: cpsw_default {
 		pinctrl-single,pins = <
 			/* Slave 1 */
@@ -593,6 +599,25 @@
 	pinctrl-0 = <&i2c1_pins>;
 	clock-frequency = <400000>;
 
+	ov2659@30 {
+		compatible = "ovti,ov2659";
+		reg = <0x30>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&clkout1_pin>;
+
+		clocks = <&clkout1_mux_ck>;
+		clock-names = "xvclk";
+		assigned-clocks = <&clkout1_mux_ck>;
+		assigned-clock-parents = <&clkout1_osc_div_ck>;
+
+		port {
+			ov2659_1: endpoint {
+				remote-endpoint = <&vpfe0_ep>;
+				link-frequencies = /bits/ 64 <70000000>;
+			};
+		};
+	};
+
 	edt-ft5306@38 {
 		status = "okay";
 		compatible = "edt,edt-ft5306", "edt,edt-ft5x06";
@@ -877,7 +902,7 @@
 	/* Camera port */
 	port {
 		vpfe0_ep: endpoint {
-			/* remote-endpoint = <&sensor>; add once we have it */
+			remote-endpoint = <&ov2659_1>;
 			ti,am437x-vpfe-interface = <0>;
 			bus-width = <8>;
 			hsync-active = <0>;
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index a6fbc088daa8..27259fd6f741 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -145,6 +145,12 @@
 			system-clock-frequency = <12000000>;
 		};
 	};
+
+	audio_mstrclk: clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12000000>;
+	};
 };
 
 &am43xx_pinmux {
@@ -696,6 +702,21 @@
 		IOVDD-supply = <&dcdc4>; /* V3_3D -> DCDC4 */
 		DVDD-supply = <&ldo1>; /* V1_8AUD -> V1_8D -> LDO1 */
 	};
+
+	ov2659@30 {
+		compatible = "ovti,ov2659";
+		reg = <0x30>;
+
+		clocks = <&audio_mstrclk>;
+		clock-names = "xvclk";
+
+		port {
+			ov2659_1: endpoint {
+				remote-endpoint = <&vpfe1_ep>;
+				link-frequencies = /bits/ 64 <70000000>;
+			};
+		};
+	};
 };
 
 &i2c2 {
@@ -964,7 +985,7 @@
 
 	port {
 		vpfe1_ep: endpoint {
-			/* remote-endpoint = <&sensor>; add once we have it */
+			remote-endpoint = <&ov2659_1>;
 			ti,am437x-vpfe-interface = <0>;
 			bus-width = <8>;
 			hsync-active = <0>;
diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi
index 091356f2a8c1..c726cd8dbdf1 100644
--- a/arch/arm/boot/dts/am43xx-clocks.dtsi
+++ b/arch/arm/boot/dts/am43xx-clocks.dtsi
@@ -704,6 +704,60 @@
 		ti,bit-shift = <8>;
 		reg = <0x2a48>;
 	};
+
+	clkout1_osc_div_ck: clkout1-osc-div-ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sys_clkin_ck>;
+		ti,bit-shift = <20>;
+		ti,max-div = <4>;
+		reg = <0x4100>;
+	};
+
+	clkout1_src2_mux_ck: clkout1-src2-mux-ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&clk_rc32k_ck>, <&sysclk_div>, <&dpll_ddr_m2_ck>,
+			 <&dpll_per_m2_ck>, <&dpll_disp_m2_ck>,
+			 <&dpll_mpu_m2_ck>;
+		reg = <0x4100>;
+	};
+
+	clkout1_src2_pre_div_ck: clkout1-src2-pre-div-ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&clkout1_src2_mux_ck>;
+		ti,bit-shift = <4>;
+		ti,max-div = <8>;
+		reg = <0x4100>;
+	};
+
+	clkout1_src2_post_div_ck: clkout1-src2-post-div-ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&clkout1_src2_pre_div_ck>;
+		ti,bit-shift = <8>;
+		ti,max-div = <32>;
+		ti,index-power-of-two;
+		reg = <0x4100>;
+	};
+
+	clkout1_mux_ck: clkout1-mux-ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&clkout1_osc_div_ck>, <&clk_rc32k_ck>,
+			 <&clkout1_src2_post_div_ck>, <&dpll_extdev_m2_ck>;
+		ti,bit-shift = <16>;
+		reg = <0x4100>;
+	};
+
+	clkout1_ck: clkout1-ck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkout1_mux_ck>;
+		ti,bit-shift = <23>;
+		reg = <0x4100>;
+	};
 };
 
 &prcm {
diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi
index 398721c7201c..aa5e55f98179 100644
--- a/arch/arm/boot/dts/am57xx-idk-common.dtsi
+++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi
@@ -9,6 +9,7 @@
 	aliases {
 		rtc0 = &tps659038_rtc;
 		rtc1 = &rtc;
+		display0 = &hdmi0;
 	};
 
 	chosen {
@@ -96,6 +97,48 @@
 			default-state = "off";
 		};
 	};
+
+	hdmi0: connector@0 {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&tpd12s015_out>;
+			};
+		};
+	};
+
+	tpd12s015: encoder@0 {
+		compatible = "ti,tpd12s016", "ti,tpd12s015";
+
+		gpios = <0>, /* optional CT_CP_HPD */
+			<0>, /* optional LS_OE */
+			<&gpio7 12 GPIO_ACTIVE_HIGH>;	/* HPD */
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tpd12s015_in: endpoint@0 {
+					remote-endpoint = <&hdmi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tpd12s015_out: endpoint@0 {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
 };
 
 &dra7_pmx_core {
@@ -485,3 +528,19 @@
 &cpu0 {
 	vdd-supply = <&smps12_reg>;
 };
+
+&hdmi {
+	status = "okay";
+
+	vdda-supply = <&ldo4_reg>;
+
+	port {
+		hdmi_out: endpoint {
+			remote-endpoint = <&tpd12s015_in>;
+		};
+	};
+};
+
+&dss {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/armada-385-clearfog-gtr-l8.dts b/arch/arm/boot/dts/armada-385-clearfog-gtr-l8.dts
new file mode 100644
index 000000000000..c9ac630e5874
--- /dev/null
+++ b/arch/arm/boot/dts/armada-385-clearfog-gtr-l8.dts
@@ -0,0 +1,115 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+#include "armada-385-clearfog-gtr.dtsi"
+
+/ {
+	model = "SolidRun Clearfog GTR L8";
+};
+
+&mdio {
+	switch0: switch0@4 {
+		compatible = "marvell,mv88e6190";
+		reg = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cf_gtr_switch_reset_pins>;
+		reset-gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <1>;
+				label = "lan8";
+				phy-handle = <&switch0phy0>;
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan7";
+				phy-handle = <&switch0phy1>;
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan6";
+				phy-handle = <&switch0phy2>;
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "lan5";
+				phy-handle = <&switch0phy3>;
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "lan4";
+				phy-handle = <&switch0phy4>;
+			};
+
+			port@6 {
+				reg = <6>;
+				label = "lan3";
+				phy-handle = <&switch0phy5>;
+			};
+
+			port@7 {
+				reg = <7>;
+				label = "lan2";
+				phy-handle = <&switch0phy6>;
+			};
+
+			port@8 {
+				reg = <8>;
+				label = "lan1";
+				phy-handle = <&switch0phy7>;
+			};
+
+			port@10 {
+				reg = <10>;
+				label = "cpu";
+				ethernet = <&eth1>;
+			};
+
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch0phy0: switch0phy0@1 {
+				reg = <0x1>;
+			};
+
+			switch0phy1: switch0phy1@2 {
+				reg = <0x2>;
+			};
+
+			switch0phy2: switch0phy2@3 {
+				reg = <0x3>;
+			};
+
+			switch0phy3: switch0phy3@4 {
+				reg = <0x4>;
+			};
+
+			switch0phy4: switch0phy4@5 {
+				reg = <0x5>;
+			};
+
+			switch0phy5: switch0phy5@6 {
+				reg = <0x6>;
+			};
+
+			switch0phy6: switch0phy6@7 {
+				reg = <0x7>;
+			};
+
+			switch0phy7: switch0phy7@8 {
+				reg = <0x8>;
+			};
+		};
+
+	};
+};
diff --git a/arch/arm/boot/dts/armada-385-clearfog-gtr-s4.dts b/arch/arm/boot/dts/armada-385-clearfog-gtr-s4.dts
new file mode 100644
index 000000000000..fa653b379490
--- /dev/null
+++ b/arch/arm/boot/dts/armada-385-clearfog-gtr-s4.dts
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+#include "armada-385-clearfog-gtr.dtsi"
+
+/ {
+	model = "SolidRun Clearfog GTR S4";
+};
+
+&sfp0 {
+	tx-fault-gpio = <&gpio0 24 GPIO_ACTIVE_HIGH>;
+};
+
+&mdio {
+	switch0: switch0@4 {
+		compatible = "marvell,mv88e6085";
+		reg = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cf_gtr_switch_reset_pins>;
+		reset-gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <1>;
+				label = "lan2";
+				phy-handle = <&switch0phy0>;
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan1";
+				phy-handle = <&switch0phy1>;
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan4";
+				phy-handle = <&switch0phy2>;
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "lan3";
+				phy-handle = <&switch0phy3>;
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "cpu";
+				ethernet = <&eth1>;
+			};
+
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch0phy0: switch0phy0@11 {
+				reg = <0x11>;
+			};
+
+			switch0phy1: switch0phy1@12 {
+				reg = <0x12>;
+			};
+
+			switch0phy2: switch0phy2@13 {
+				reg = <0x13>;
+			};
+
+			switch0phy3: switch0phy3@14 {
+				reg = <0x14>;
+			};
+		};
+
+	};
+};
diff --git a/arch/arm/boot/dts/armada-385-clearfog-gtr.dtsi b/arch/arm/boot/dts/armada-385-clearfog-gtr.dtsi
new file mode 100644
index 000000000000..624bbcae68c0
--- /dev/null
+++ b/arch/arm/boot/dts/armada-385-clearfog-gtr.dtsi
@@ -0,0 +1,450 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for Clearfog GTR machines rev 1.0 (88F6825)
+ *
+ *  Rabeeh Khoury <rabeeh@solid-run.com>, based on Russell King clearfog work
+ */
+
+/*
+	SERDES mapping -
+	0. SATA1 on CON18, or optionally mini PCIe CON3 - PCIe0
+	1. 6141 switch (2.5Gbps capable)
+	2. SATA0 on CON17, or optionally mini PCIe CON4 - PCIe1
+	3. USB 3.0 Host
+	4. mini PCIe CON2 - PCIe2
+	5. SFP connector, or optionally SGMII Ethernet 1512 PHY
+
+	USB 2.0 mapping -
+	0. USB 2.0 - 0 USB pins header CON12
+	1. USB 2.0 - 1 mini PCIe CON2
+	2. USB 2.0 - 2 to USB 3.0 connector (used with SERDES #3)
+
+	Pin mapping -
+	0,1 - console UART
+	2,3 - I2C0 - connected to I2C EEPROM, two temperature sensors,
+	      front panel and PSE controller
+	4,5 - MDC/MDIO
+	6..17 - RGMII
+	18 - Topaz switch reset (active low)
+	19 - 1512 phy reset
+	20 - 1512 phy reset (eth2, optional)
+	21,28,37,38,39,40 - SD0
+	22 - USB 3.0 current limiter enable (active high)
+	24 - SFP TX fault (input active high)
+	25 - SFP present (input active low)
+	26,27 - I2C1 - connected to SFP
+	29 - Fan PWM
+	30 - CON4 mini PCIe wifi disable
+	31 - CON3 mini PCIe wifi disable
+	32 - Fuse programming power toggle (1.8v)
+	33 - CON4 mini PCIe reset
+	34 - CON2 mini PCIe wifi disable
+	35 - CON3 mini PCIe reset
+	36 - Rear button (GPIO active low)
+	41 - CON1 front panel connector
+	42 - Front LED1, or front panel CON1
+	43 - Micron L-PBGA 24 ball SPI (1Gb) CS, or TPM SPI CS
+	44 - CON2 mini PCIe reset
+	45 - TPM PIRQ signal, or front panel CON1
+	46 - SFP TX disable
+	47 - Control isolation of boot sensitive SAR signals
+	48 - PSE reset
+	49 - PSE OSS signal
+	50 - PSE interrupt
+	52 - Front LED2, or front panel
+	53 - Front button
+	54 - SFP LOS (input active high)
+	55 - Fan sense
+	56(mosi),57(clk),58(miso) - SPI interface - 32Mb SPI, 1Gb SPI and TPM
+	59 - SPI 32Mb W25Q32BVZPIG CS0 chip select (bootable)
+*/
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include "armada-385.dtsi"
+
+/ {
+	compatible = "marvell,armada385", "marvell,armada380";
+
+	aliases {
+		/* So that mvebu u-boot can update the MAC addresses */
+		ethernet1 = &eth0;
+		ethernet2 = &eth1;
+		ethernet3 = &eth2;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>; /* 256 MB */
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_5p0v: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "5P0V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	v_usb3_con: regulator-v-usb3-con {
+		compatible = "regulator-fixed";
+		gpio = <&gpio0 22 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cf_gtr_usb3_con_vbus>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_usb3_con";
+		vin-supply = <&reg_5p0v>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
+
+		internal-regs {
+
+			rtc@a3800 {
+				status = "okay";
+			};
+
+			i2c@11000 { /* ROM, temp sensor and front panel */
+				pinctrl-0 = <&i2c0_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+			};
+
+			i2c@11100 { /* SFP (CON5/CON6) */
+				pinctrl-0 = <&cf_gtr_i2c1_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+			};
+
+			pinctrl@18000 {
+				cf_gtr_switch_reset_pins: cf-gtr-switch-reset-pins {
+					marvell,pins = "mpp18";
+					marvell,function = "gpio";
+				};
+
+				cf_gtr_usb3_con_vbus: cf-gtr-usb3-con-vbus {
+					marvell,pins = "mpp22";
+					marvell,function = "gpio";
+				};
+
+				cf_gtr_fan_pwm: cf-gtr-fan-pwm {
+					marvell,pins = "mpp23";
+					marvell,function = "gpio";
+				};
+
+				cf_gtr_i2c1_pins: i2c1-pins {
+					/* SFP */
+					marvell,pins = "mpp26", "mpp27";
+					marvell,function = "i2c1";
+				};
+
+				cf_gtr_sdhci_pins: cf-gtr-sdhci-pins {
+					marvell,pins = "mpp21", "mpp28",
+						       "mpp37", "mpp38",
+						       "mpp39", "mpp40";
+					marvell,function = "sd0";
+				};
+
+				cf_gtr_isolation_pins: cf-gtr-isolation-pins {
+					marvell,pins = "mpp47";
+					marvell,function = "gpio";
+				};
+
+				cf_gtr_poe_reset_pins: cf-gtr-poe-reset-pins {
+					marvell,pins = "mpp48";
+					marvell,function = "gpio";
+				};
+
+				cf_gtr_spi1_cs_pins: spi1-cs-pins {
+					marvell,pins = "mpp59";
+					marvell,function = "spi1";
+				};
+
+				cf_gtr_front_button_pins: cf-gtr-front-button-pins {
+					marvell,pins = "mpp53";
+					marvell,function = "gpio";
+				};
+
+				cf_gtr_rear_button_pins: cf-gtr-rear-button-pins {
+					marvell,pins = "mpp36";
+					marvell,function = "gpio";
+				};
+			};
+
+			sdhci@d8000 {
+				bus-width = <4>;
+				no-1-8-v;
+				non-removable;
+				pinctrl-0 = <&cf_gtr_sdhci_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				vmmc = <&reg_3p3v>;
+				wp-inverted;
+			};
+
+			usb@58000 {
+				status = "okay";
+			};
+
+			usb3@f0000 {
+				status = "okay";
+			};
+
+			usb3@f8000 {
+				vbus-supply = <&v_usb3_con>;
+				status = "okay";
+			};
+		};
+
+		pcie {
+			status = "okay";
+			/*
+			 * The PCIe units are accessible through
+			 * the mini-PCIe connectors on the board.
+			 */
+			pcie@1,0 {
+				reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+				status = "okay";
+			};
+
+			pcie@2,0 {
+				reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+				status = "okay";
+			};
+
+			pcie@3,0 {
+				reset-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+				status = "okay";
+			};
+		};
+	};
+
+	sfp0: sfp {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c1>;
+		los-gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpio = <&gpio0 25 GPIO_ACTIVE_LOW>;
+		tx-disable-gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&cf_gtr_rear_button_pins &cf_gtr_front_button_pins>;
+		pinctrl-names = "default";
+
+		button_0 {
+			label = "Rear Button";
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+			linux,can-disable;
+			linux,code = <BTN_0>;
+		};
+
+		button_1 {
+			label = "Front Button";
+			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+			linux,can-disable;
+			linux,code = <BTN_1>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led1 {
+			function = LED_FUNCTION_CPU;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		};
+
+		led2 {
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&bm {
+	status = "okay";
+};
+
+&bm_bppi {
+	status = "okay";
+};
+
+&eth0 {
+	/* ethernet@70000 */
+	pinctrl-0 = <&ge0_rgmii_pins>;
+	pinctrl-names = "default";
+	phy = <&phy_dedicated>;
+	phy-mode = "rgmii-id";
+	buffer-manager = <&bm>;
+	bm,pool-long = <0>;
+	bm,pool-short = <1>;
+	status = "okay";
+};
+
+&eth1 {
+	/* ethernet@30000 */
+	bm,pool-long = <2>;
+	bm,pool-short = <1>;
+	buffer-manager = <&bm>;
+	phys = <&comphy1 1>;
+	phy-mode = "2500base-x";
+	status = "okay";
+
+	fixed-link {
+		speed = <2500>;
+		full-duplex;
+	};
+};
+
+&eth2 {
+	/* ethernet@34000 */
+	bm,pool-long = <3>;
+	bm,pool-short = <1>;
+	buffer-manager = <&bm>;
+	managed = "in-band-status";
+	phys = <&comphy5 1>;
+	phy-mode = "sgmii";
+	sfp = <&sfp0>;
+	status = "okay";
+};
+
+&mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio_pins>;
+	status = "okay";
+
+	phy_dedicated: ethernet-phy@0 {
+		/*
+		 * Annoyingly, the marvell phy driver configures the LED
+		 * register, rather than preserving reset-loaded setting.
+		 * We undo that rubbish here.
+		 */
+		marvell,reg-init = <3 16 0 0x1017>;
+		reg = <0>;
+	};
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&spi1 {
+	/*
+	 * CS0: W25Q32 flash
+	 */
+	pinctrl-0 = <&spi1_pins &cf_gtr_spi1_cs_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "w25q32", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <3000000>;
+		status = "okay";
+	};
+};
+
+&i2c0 {
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	/* U26 temperature sensor placed near SoC */
+	temp1: nct75@4c {
+		compatible = "lm75";
+		reg = <0x4c>;
+	};
+
+	/* U27 temperature sensor placed near RTC battery */
+	temp2: nct75@4d {
+		compatible = "lm75";
+		reg = <0x4d>;
+	};
+
+	/* 2Kb eeprom */
+	eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+	};
+};
+
+&ahci0 {
+	status = "okay";
+};
+
+&ahci1 {
+	status = "okay";
+};
+
+&gpio0 {
+	pinctrl-0 = <&cf_gtr_fan_pwm>;
+	pinctrl-names = "default";
+
+	wifi-disable {
+		gpio-hog;
+		gpios = <30 GPIO_ACTIVE_LOW>, <31 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "wifi-disable";
+	};
+};
+
+&gpio1 {
+	pinctrl-0 = <&cf_gtr_isolation_pins &cf_gtr_poe_reset_pins>;
+	pinctrl-names = "default";
+
+	lte-disable {
+		gpio-hog;
+		gpios = <2 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "lte-disable";
+	};
+
+	/*
+	 * This signal, when asserted, isolates Armada 38x sample at reset pins
+	 * from control of external devices. Should be de-asserted after reset.
+	 */
+	sar-isolation {
+		gpio-hog;
+		gpios = <15 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "sar-isolation";
+	};
+
+	poe-reset {
+		gpio-hog;
+		gpios = <16 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "poe-reset";
+	};
+};
diff --git a/arch/arm/boot/dts/armada-388-clearfog.dtsi b/arch/arm/boot/dts/armada-388-clearfog.dtsi
index 0d81600ca247..a0aa1d188f0c 100644
--- a/arch/arm/boot/dts/armada-388-clearfog.dtsi
+++ b/arch/arm/boot/dts/armada-388-clearfog.dtsi
@@ -111,11 +111,6 @@
 };
 
 &i2c0 {
-	clock-frequency = <400000>;
-	pinctrl-0 = <&i2c0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
 	/*
 	 * PCA9655 GPIO expander, up to 1MHz clock.
 	 *  0-CON3 CLKREQ#
@@ -183,6 +178,12 @@
 		compatible = "microchip,mcp3021";
 		reg = <0x4c>;
 	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
 };
 
 &i2c1 {
diff --git a/arch/arm/boot/dts/armada-388-helios4.dts b/arch/arm/boot/dts/armada-388-helios4.dts
index 705adfa8c680..fb49df2a3bce 100644
--- a/arch/arm/boot/dts/armada-388-helios4.dts
+++ b/arch/arm/boot/dts/armada-388-helios4.dts
@@ -140,11 +140,6 @@
 	soc {
 		internal-regs {
 			i2c@11000 {
-				clock-frequency = <400000>;
-				pinctrl-0 = <&i2c0_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-
 				/*
 				 * PCA9655 GPIO expander, up to 1MHz clock.
 				 *  0-Board Revision bit 0 #
diff --git a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi
index 3a7f9c1ac346..363ac4238859 100644
--- a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi
+++ b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi
@@ -71,6 +71,19 @@
 	};
 };
 
+&i2c0 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+};
+
 &pinctrl {
 	microsom_phy_clk_pins: microsom-phy-clk-pins {
 		marvell,pins = "mpp45";
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge100.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge100.dts
index b1e10f0c85c9..322587b7b67d 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge100.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge100.dts
@@ -76,7 +76,6 @@
 
 &mac1 {
 	status = "okay";
-	no-hw-checksum;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
 };
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts
index aaa77a597d1a..54e508530dce 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts
@@ -75,7 +75,6 @@
 
 &mac1 {
 	status = "okay";
-	no-hw-checksum;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
 };
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-yamp.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-yamp.dts
index 52933598aac6..fe2e11c2da15 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-yamp.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-yamp.dts
@@ -35,7 +35,6 @@
 &mac0 {
 	status = "okay";
 	use-ncsi;
-	no-hw-checksum;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_rmii1_default>;
 	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
index 13f7aefe045e..6232cd726a7f 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
@@ -97,22 +97,22 @@
 	status = "okay";
 
 	power-supply@68 {
-		compatible = "ibm,cffps2";
+		compatible = "ibm,cffps";
 		reg = <0x68>;
 	};
 
 	power-supply@69 {
-		compatible = "ibm,cffps2";
+		compatible = "ibm,cffps";
 		reg = <0x69>;
 	};
 
 	power-supply@6a {
-		compatible = "ibm,cffps2";
+		compatible = "ibm,cffps";
 		reg = <0x6a>;
 	};
 
 	power-supply@6b {
-		compatible = "ibm,cffps2";
+		compatible = "ibm,cffps";
 		reg = <0x6b>;
 	};
 };
@@ -352,18 +352,8 @@
 &i2c8 {
 	status = "okay";
 
-	ucd90320@b {
-		compatible = "ti,ucd90160";
-		reg = <0x0b>;
-	};
-
-	ucd90320@c {
-		compatible = "ti,ucd90160";
-		reg = <0x0c>;
-	};
-
 	ucd90320@11 {
-		compatible = "ti,ucd90160";
+		compatible = "ti,ucd90320";
 		reg = <0x11>;
 	};
 
diff --git a/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts b/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts
index c17bb7fce7ff..62a3ab4c1866 100644
--- a/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts
@@ -94,8 +94,6 @@
 
 	gpio-keys-polled {
 		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		poll-interval = <1000>;
 
 		fan0-presence {
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts b/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts
index b8fdd2a8a2c9..d56b5ed09b37 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts
@@ -82,8 +82,6 @@
 
 	gpio-keys-polled {
 		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		poll-interval = <1000>;
 
 		scm0-presence {
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts b/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts
index affd2c8743b1..01074b6e3e03 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts
@@ -14,7 +14,7 @@
 		bootargs = "console=ttyS4,115200 earlyprintk";
 	};
 
-	memory {
+	memory@40000000 {
 		reg = <0x40000000 0x20000000>;
 	};
 
@@ -107,10 +107,7 @@
 
 &mac0 {
 	status = "okay";
-
 	use-ncsi;
-	no-hw-checksum;
-
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_rmii1_default>;
 };
@@ -236,3 +233,16 @@
 &wdt2 {
 	aspeed,alt-boot;
 };
+
+&sdmmc {
+	status = "okay";
+};
+
+&sdhci1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sd2_default>;
+	cd-inverted;
+	disable-wp;
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts
index 569dad93e162..421aa600148b 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts
@@ -77,8 +77,6 @@
 
 	gpio-keys-polled {
 		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		poll-interval = <1000>;
 
 		fan0-presence {
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index 46c0891aac5a..807a0fc20670 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -179,18 +179,21 @@
 				compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd";
 				reg = <0x1e6e2000 0x1a8>;
 				#address-cells = <1>;
-				#size-cells = <0>;
+				#size-cells = <1>;
+				ranges = <0 0x1e6e2000 0x1000>;
 				#clock-cells = <1>;
 				#reset-cells = <1>;
 
-				pinctrl: pinctrl {
-					compatible = "aspeed,ast2400-pinctrl";
-				};
-
-				p2a: p2a-control {
+				p2a: p2a-control@2c {
+					reg = <0x2c 0x4>;
 					compatible = "aspeed,ast2400-p2a-ctrl";
 					status = "disabled";
 				};
+
+				pinctrl: pinctrl@80 {
+					reg = <0x80 0x18>, <0xa0 0x10>;
+					compatible = "aspeed,ast2400-pinctrl";
+				};
 			};
 
 			rng: hwrng@1e6e2078 {
@@ -346,14 +349,14 @@
 
 					lpc_ctrl: lpc-ctrl@0 {
 						compatible = "aspeed,ast2400-lpc-ctrl";
-						reg = <0x0 0x80>;
+						reg = <0x0 0x10>;
 						clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
 						status = "disabled";
 					};
 
-					lpc_snoop: lpc-snoop@0 {
+					lpc_snoop: lpc-snoop@10 {
 						compatible = "aspeed,ast2400-lpc-snoop";
-						reg = <0x0 0x80>;
+						reg = <0x10 0x8>;
 						interrupts = <8>;
 						status = "disabled";
 					};
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index a259c63fff06..ebec0fa8baa7 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -47,13 +47,6 @@
 		reg = <0x80000000 0>;
 	};
 
-	edac: sdram@1e6e0000 {
-		compatible = "aspeed,ast2500-sdram-edac";
-		reg = <0x1e6e0000 0x174>;
-		interrupts = <0>;
-		status = "disabled";
-	};
-
 	ahb {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -213,24 +206,33 @@
 			#size-cells = <1>;
 			ranges;
 
+			edac: memory-controller@1e6e0000 {
+				compatible = "aspeed,ast2500-sdram-edac";
+				reg = <0x1e6e0000 0x174>;
+				interrupts = <0>;
+				status = "disabled";
+			};
+
 			syscon: syscon@1e6e2000 {
 				compatible = "aspeed,ast2500-scu", "syscon", "simple-mfd";
 				reg = <0x1e6e2000 0x1a8>;
 				#address-cells = <1>;
-				#size-cells = <0>;
+				#size-cells = <1>;
+				ranges = <0 0x1e6e2000 0x1000>;
 				#clock-cells = <1>;
 				#reset-cells = <1>;
 
-				pinctrl: pinctrl {
-					compatible = "aspeed,ast2500-pinctrl";
-					aspeed,external-nodes = <&gfx &lhc>;
-
-				};
-
-				p2a: p2a-control {
+				p2a: p2a-control@2c {
 					compatible = "aspeed,ast2500-p2a-ctrl";
+					reg = <0x2c 0x4>;
 					status = "disabled";
 				};
+
+				pinctrl: pinctrl@80 {
+					compatible = "aspeed,ast2500-pinctrl";
+					reg = <0x80 0x18>, <0xa0 0x10>;
+					aspeed,external-nodes = <&gfx>, <&lhc>;
+				};
 			};
 
 			rng: hwrng@1e6e2078 {
@@ -460,29 +462,30 @@
 
 					lpc_ctrl: lpc-ctrl@0 {
 						compatible = "aspeed,ast2500-lpc-ctrl";
-						reg = <0x0 0x80>;
+						reg = <0x0 0x10>;
 						clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
 						status = "disabled";
 					};
 
-					lpc_snoop: lpc-snoop@0 {
+					lpc_snoop: lpc-snoop@10 {
 						compatible = "aspeed,ast2500-lpc-snoop";
-						reg = <0x0 0x80>;
+						reg = <0x10 0x8>;
 						interrupts = <8>;
 						status = "disabled";
 					};
 
-					lhc: lhc@20 {
-						compatible = "aspeed,ast2500-lhc";
-						reg = <0x20 0x24 0x48 0x8>;
-					};
-
 					lpc_reset: reset-controller@18 {
 						compatible = "aspeed,ast2500-lpc-reset";
 						reg = <0x18 0x4>;
 						#reset-cells = <1>;
 					};
 
+					lhc: lhc@20 {
+						compatible = "aspeed,ast2500-lhc";
+						reg = <0x20 0x24 0x48 0x8>;
+					};
+
+
 					ibt: ibt@c0 {
 						compatible = "aspeed,ast2500-ibt-bmc";
 						reg = <0xc0 0x18>;
diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index b72afbaadaf8..796976d275e1 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -365,7 +365,7 @@
 				status = "disabled";
 			};
 
-			wdt4: watchdog@1e7850C0 {
+			wdt4: watchdog@1e7850c0 {
 				compatible = "aspeed,ast2600-wdt";
 				reg = <0x1e7850C0 0x40>;
 				status = "disabled";
diff --git a/arch/arm/boot/dts/ast2500-facebook-netbmc-common.dtsi b/arch/arm/boot/dts/ast2500-facebook-netbmc-common.dtsi
index 7a395ba56512..7468f102bd76 100644
--- a/arch/arm/boot/dts/ast2500-facebook-netbmc-common.dtsi
+++ b/arch/arm/boot/dts/ast2500-facebook-netbmc-common.dtsi
@@ -71,7 +71,6 @@
 
 &mac1 {
 	status = "okay";
-	no-hw-checksum;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
 };
diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts
index 90996eaf73b2..7d938ccf71b0 100644
--- a/arch/arm/boot/dts/at91-kizbox.dts
+++ b/arch/arm/boot/dts/at91-kizbox.dts
@@ -28,85 +28,6 @@
 		};
 	};
 
-	ahb {
-		apb {
-			tcb0: timer@fffa0000 {
-				timer@0 {
-					compatible = "atmel,tcb-timer";
-					reg = <0>, <1>;
-				};
-
-				timer@2 {
-					compatible = "atmel,tcb-timer";
-					reg = <2>;
-				};
-			};
-
-			macb0: ethernet@fffc4000 {
-				phy-mode = "mii";
-				pinctrl-0 = <&pinctrl_macb_rmii
-				             &pinctrl_macb_rmii_mii_alt>;
-				status = "okay";
-			};
-
-			usart3: serial@fffd0000 {
-				status = "okay";
-			};
-
-			dbgu: serial@fffff200 {
-				status = "okay";
-			};
-
-			watchdog@fffffd40 {
-				timeout-sec = <15>;
-				atmel,max-heartbeat-sec = <16>;
-				atmel,min-heartbeat-sec = <0>;
-				status = "okay";
-			};
-		};
-
-		usb0: ohci@500000 {
-			num-ports = <1>;
-			status = "okay";
-		};
-
-		ebi: ebi@10000000 {
-			status = "okay";
-
-			nand_controller: nand-controller {
-				status = "okay";
-				pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
-				pinctrl-names = "default";
-
-				nand@3 {
-					reg = <0x3 0x0 0x800000>;
-					rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
-					cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
-					nand-bus-width = <8>;
-					nand-ecc-mode = "soft";
-					nand-on-flash-bbt;
-					label = "atmel_nand";
-
-					partitions {
-						compatible = "fixed-partitions";
-						#address-cells = <1>;
-						#size-cells = <1>;
-
-						bootstrap@0 {
-							label = "bootstrap";
-							reg = <0x0 0x20000>;
-						};
-
-						ubi@20000 {
-							label = "ubi";
-							reg = <0x20000 0x7fe0000>;
-						};
-					};
-				};
-			};
-		};
-	};
-
 	gpio_keys {
 		compatible = "gpio-keys";
 		#address-cells = <1>;
@@ -127,15 +48,6 @@
 		};
 	};
 
-	i2c-gpio-0 {
-		status = "okay";
-
-		rtc: pcf8563@51 {
-			compatible = "nxp,pcf8563";
-			reg = <0x51>;
-		};
-	};
-
 	pwm_leds {
 		compatible = "pwm-leds";
 
@@ -179,3 +91,87 @@
 			     &pinctrl_tcb1_tiob0>;
 	};
 };
+
+&tcb0 {
+	timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>, <1>;
+	};
+
+	timer@2 {
+		compatible = "atmel,tcb-timer";
+		reg = <2>;
+	};
+};
+
+&ebi {
+	status = "okay";
+};
+
+&nand_controller {
+	status = "okay";
+	pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
+	pinctrl-names = "default";
+
+	nand@3 {
+		reg = <0x3 0x0 0x800000>;
+		rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
+		nand-bus-width = <8>;
+		nand-ecc-mode = "soft";
+		nand-on-flash-bbt;
+		label = "atmel_nand";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			bootstrap@0 {
+				label = "bootstrap";
+				reg = <0x0 0x20000>;
+			};
+
+			ubi@20000 {
+				label = "ubi";
+				reg = <0x20000 0x7fe0000>;
+			};
+		};
+	};
+};
+
+&macb0 {
+	phy-mode = "mii";
+	pinctrl-0 = <&pinctrl_macb_rmii
+		     &pinctrl_macb_rmii_mii_alt>;
+	status = "okay";
+};
+
+&usart3 {
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&watchdog {
+	timeout-sec = <15>;
+	atmel,max-heartbeat-sec = <16>;
+	atmel,min-heartbeat-sec = <0>;
+	status = "okay";
+};
+
+&usb0 {
+	num-ports = <1>;
+	status = "okay";
+};
+
+&i2c_gpio0 {
+	status = "okay";
+
+	rtc: pcf8563@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
diff --git a/arch/arm/boot/dts/at91-kizboxmini-base.dts b/arch/arm/boot/dts/at91-kizboxmini-base.dts
new file mode 100644
index 000000000000..81c29ca5cc1b
--- /dev/null
+++ b/arch/arm/boot/dts/at91-kizboxmini-base.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91-kizboxmini-base.dts - Device Tree file for Overkiz Kizbox mini
+ * base board
+ *
+ * Copyright (C) 2015 Overkiz SAS
+ *   Author: Antoine Aubert <a.aubert@overkiz.com>
+ *           Kévin Raymond <k.raymond@overkiz.com>
+ */
+/dts-v1/;
+#include "at91-kizboxmini-common.dtsi"
+
+/ {
+	model = "Overkiz Kizbox Mini";
+	compatible = "overkiz,kizboxmini-base", "atmel,at91sam9g25",
+		     "atmel,at91sam9x5", "atmel,at91sam9";
+};
+
+&pinctrl_usart0 {
+	atmel,pins =
+		<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+		 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE
+		 AT91_PIOA 2 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
+};
diff --git a/arch/arm/boot/dts/at91-kizboxmini.dts b/arch/arm/boot/dts/at91-kizboxmini-common.dtsi
index cb22f5fb055f..fddf267b2d17 100644
--- a/arch/arm/boot/dts/at91-kizboxmini.dts
+++ b/arch/arm/boot/dts/at91-kizboxmini-common.dtsi
@@ -1,17 +1,16 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
+// SPDX-License-Identifier: GPL-2.0
 /*
  * at91-kizboxmini.dts - Device Tree file for Overkiz Kizbox mini board
  *
- * Copyright (C) 2014 Gaël PORTAY <g.portay@overkiz.com>
+ * Copyright (C) 2014-2018 Overkiz SAS
+ *   Author: Antoine Aubert <a.aubert@overkiz.com>
+ *           Gaël Portay <g.portay@overkiz.com>
+ *           Kévin Raymond <k.raymond@overkiz.com>
+ *           Dorian Rocipon <d.rocipon@overkiz.com>
  */
-/dts-v1/;
 #include "at91sam9g25.dtsi"
-#include <dt-bindings/pwm/pwm.h>
 
 / {
-	model = "Overkiz Kizbox mini";
-	compatible = "overkiz,kizboxmini", "atmel,at91sam9g25", "atmel,at91sam9x5", "atmel,at91sam9";
-
 	chosen {
 		bootargs = "ubi.mtd=ubi";
 		stdout-path = &dbgu;
@@ -22,24 +21,16 @@
 	};
 
 	clocks {
-		slow_xtal {
-			clock-frequency = <32768>;
-		};
-
 		main_xtal {
 			clock-frequency = <12000000>;
 		};
-	};
 
-	ahb {
-		nand0: nand@40000000 {
-			nand-bus-width = <8>;
-			nand-ecc-mode = "hw";
-			atmel,has-pmecc;
-			atmel,pmecc-cap = <4>;
-			atmel,pmecc-sector-size = <512>;
-			nand-on-flash-bbt;
-			status = "okay";
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		adc_op_clk {
+			status = "disabled";
 		};
 	};
 
@@ -63,17 +54,25 @@
 		};
 	};
 
-	pwm_leds {
+	leds: pwm_leds {
 		compatible = "pwm-leds";
 
-		green {
+		led_blue: pwm_blue {
+			label = "pwm:blue:user";
+			pwms = <&pwm0 2 10000000 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "none";
+			status = "disabled";
+		};
+
+		led_green: pwm_green {
 			label = "pwm:green:user";
 			pwms = <&pwm0 0 10000000 0>;
 			max-brightness = <255>;
 			linux,default-trigger = "default-on";
 		};
 
-		red {
+		led_red: pwm_red {
 			label = "pwm:red:user";
 			pwms = <&pwm0 1 10000000 0>;
 			max-brightness = <255>;
@@ -82,53 +81,12 @@
 	};
 };
 
-&dbgu {
+&usart0 {
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
 	status = "okay";
 };
 
-&ebi {
-	pinctrl-0 = <&pinctrl_ebi_addr_nand
-		     &pinctrl_ebi_data_0_7>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	nand-controller {
-		pinctrl-0 = <&pinctrl_nand_oe_we
-			     &pinctrl_nand_cs
-			     &pinctrl_nand_rb>;
-		pinctrl-names = "default";
-		status = "okay";
-
-		nand@3 {
-			reg = <0x3 0x0 0x800000>;
-			rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
-			cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
-			nand-bus-width = <8>;
-			nand-ecc-mode = "hw";
-			nand-ecc-strength = <4>;
-			nand-ecc-step-size = <512>;
-			nand-on-flash-bbt;
-			label = "atmel_nand";
-
-			partitions {
-				compatible = "fixed-partitions";
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				bootstrap@0 {
-					label = "bootstrap";
-					reg = <0x0 0x20000>;
-				};
-
-				ubi@20000 {
-					label = "ubi";
-					reg = <0x20000 0x7fe0000>;
-				};
-			};
-		};
-	};
-};
-
 &macb0 {
 	phy-mode = "rmii";
 	status = "okay";
@@ -137,26 +95,70 @@
 &pwm0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm0_pwm0_1
-		     &pinctrl_pwm0_pwm1_1>;
+		     &pinctrl_pwm0_pwm1_1
+		     &pinctrl_pwm0_pwm2_1>;
 	status = "okay";
 };
 
-&tcb0 {
-	timer@0 {
-		compatible = "atmel,tcb-timer";
-		reg = <0>;
-	};
+&dbgu {
+	status = "okay";
+};
 
-	timer@1 {
-		compatible = "atmel,tcb-timer";
-		reg = <1>;
-	};
+&watchdog {
+	status = "okay";
 };
 
-&usart0 {
+&adc0 {
+	status = "disabled";
+};
+
+&rtc {
+	status = "disabled";
+};
+
+&ebi {
+	pinctrl-0 = <&pinctrl_ebi_addr_nand
+			&pinctrl_ebi_data_0_7>;
+	pinctrl-names = "default";
 	status = "okay";
 };
 
+&nand_controller {
+	status = "okay";
+	pinctrl-0 = <&pinctrl_nand_oe_we
+		     &pinctrl_nand_cs
+		     &pinctrl_nand_rb>;
+	pinctrl-names = "default";
+
+	nand@3 {
+		reg = <0x3 0x0 0x800000>;
+		rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
+		nand-bus-width = <8>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+		nand-on-flash-bbt;
+		label = "atmel_nand";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			bootstrap@0 {
+				label = "bootstrap";
+				reg = <0x0 0x20000>;
+			};
+
+			ubi@20000 {
+				label = "ubi";
+				reg = <0x20000 0x7fe0000>;
+			};
+		};
+	};
+};
+
 &usb0 {
 	num-ports = <1>;
 	status = "okay";
@@ -166,6 +168,3 @@
 	status = "okay";
 };
 
-&watchdog {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/at91-kizboxmini-mb.dts b/arch/arm/boot/dts/at91-kizboxmini-mb.dts
new file mode 100644
index 000000000000..c07d3076a9bc
--- /dev/null
+++ b/arch/arm/boot/dts/at91-kizboxmini-mb.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2015-2018 Overkiz SAS
+ *   Author: Mickael Gardet <m.gardet@overkiz.com>
+ *           Kévin Raymond <k.raymond@overkiz.com>
+ */
+/dts-v1/;
+#include "at91-kizboxmini-common.dtsi"
+
+/ {
+	model = "Overkiz Kizbox Mini Mother Board";
+	compatible = "overkiz,kizboxmini-mb", "atmel,at91sam9g25",
+		     "atmel,at91sam9x5", "atmel,at91sam9";
+};
+
+&usb0 {
+	num-ports = <2>;
+};
+
+&rtc {
+	status = "okay";
+};
+
+&led_blue {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91-kizboxmini-rd.dts b/arch/arm/boot/dts/at91-kizboxmini-rd.dts
new file mode 100644
index 000000000000..ab50f4d22387
--- /dev/null
+++ b/arch/arm/boot/dts/at91-kizboxmini-rd.dts
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2015-2018 Overkiz SAS
+ *   Author: Mickael Gardet <m.gardet@overkiz.com>
+ *           Kévin Raymond <k.raymond@overkiz.com>
+ */
+/dts-v1/;
+#include "at91-kizboxmini-common.dtsi"
+
+/ {
+	model = "Overkiz Kizbox Mini RailDIN";
+	compatible = "overkiz,kizboxmini-rd", "atmel,at91sam9g25",
+		     "atmel,at91sam9x5", "atmel,at91sam9";
+
+	clocks {
+		adc_op_clk {
+			status = "okay";
+		};
+	};
+};
+
+&pinctrl {
+	adc0 {
+		pinctrl_adc0_ad5: adc0_ad5-0 {
+			/* pull-up disable */
+			atmel,pins = <AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+};
+
+&usart0 {
+	status = "disabled";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&led_blue {
+	status = "okay";
+};
+
+&adc0 {
+	atmel,adc-vref = <2500>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_ad5>;
+	atmel,adc-channels-used = <0x0020>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
index f245944bd5d7..4f123477e631 100644
--- a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
+++ b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
@@ -8,7 +8,6 @@
  */
 /dts-v1/;
 #include "at91-linea.dtsi"
-#include "sama5d3_lcd.dtsi"
 #include "at91-natte.dtsi"
 
 / {
diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts
new file mode 100644
index 000000000000..9f30132d7d7b
--- /dev/null
+++ b/arch/arm/boot/dts/at91-sam9x60ek.dts
@@ -0,0 +1,647 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sam9x60ek.dts - Device Tree file for Microchip SAM9X60-EK board
+ *
+ * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Sandeep Sheriker M <sandeepsheriker.mallikarjun@microchip.com>
+ */
+/dts-v1/;
+#include "sam9x60.dtsi"
+
+/ {
+	model = "Microchip SAM9X60-EK";
+	compatible = "microchip,sam9x60ek", "microchip,sam9x60", "atmel,at91sam9";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <24000000>;
+		};
+	};
+
+	regulators: regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdd_1v8: fixed-regulator-vdd_1v8@0 {
+			compatible = "regulator-fixed";
+			regulator-name = "VDD_1V8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+			status = "okay";
+		};
+
+		vdd_1v5: fixed-regulator-vdd_1v5@1 {
+			compatible = "regulator-fixed";
+			regulator-name = "VDD_1V5";
+			regulator-min-microvolt = <1500000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-always-on;
+			status = "okay";
+		};
+
+		vdd1_3v3: fixed-regulator-vdd1_3v3@2 {
+			compatible = "regulator-fixed";
+			regulator-name = "VDD1_3V3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+			status = "okay";
+		};
+
+		vdd2_3v3: regulator-fixed-vdd2_3v3@3 {
+			compatible = "regulator-fixed";
+			regulator-name = "VDD2_3V3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+			status = "okay";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+		status = "okay";
+
+		sw1 {
+			label = "SW1";
+			gpios = <&pioD 18 GPIO_ACTIVE_LOW>;
+			linux,code=<0x104>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		status = "okay"; /* Conflict with pwm0. */
+
+		red {
+			label = "red";
+			gpios = <&pioB 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		green {
+			label = "green";
+			gpios = <&pioB 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		blue {
+			label = "blue";
+			gpios = <&pioB 13 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&adc {
+	vddana-supply = <&vdd1_3v3>;
+	vref-supply = <&vdd1_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc_default &pinctrl_adtrg_default>;
+	status = "okay";
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can0_rx_tx>;
+	status = "disabled"; /* Conflict with dbgu. */
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1_rx_tx>;
+	status = "okay";
+};
+
+&classd {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_classd_default>;
+	atmel,pwm-type = "diff";
+	atmel,non-overlap-time = <10>;
+	status = "okay";
+};
+
+&dbgu {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_dbgu>;
+	status = "okay"; /* Conflict with can0. */
+};
+
+&ebi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ebi_addr_nand &pinctrl_ebi_data_0_7>;
+	status = "okay";
+
+	nand_controller: nand-controller {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_nand_oe_we &pinctrl_nand_cs &pinctrl_nand_rb>;
+		status = "okay";
+
+		nand@3 {
+			reg = <0x3 0x0 0x800000>;
+			rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
+			cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			nand-ecc-strength = <8>;
+			nand-ecc-step-size = <512>;
+			nand-on-flash-bbt;
+			label = "atmel_nand";
+
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				at91bootstrap@0 {
+					label = "at91bootstrap";
+					reg = <0x0 0x40000>;
+				};
+
+				uboot@40000 {
+					label = "u-boot";
+					reg = <0x40000 0xc0000>;
+				};
+
+				ubootenvred@100000 {
+					label = "U-Boot Env Redundant";
+					reg = <0x100000 0x40000>;
+				};
+
+				ubootenv@140000 {
+					label = "U-Boot Env";
+					reg = <0x140000 0x40000>;
+				};
+
+				dtb@180000 {
+					label = "device tree";
+					reg = <0x180000 0x80000>;
+				};
+
+				kernel@200000 {
+					label = "kernel";
+					reg = <0x200000 0x600000>;
+				};
+
+				rootfs@800000 {
+					label = "rootfs";
+					reg = <0x800000 0x1f800000>;
+				};
+			};
+		};
+	};
+};
+
+&flx0 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c0: i2c@600 {
+		compatible = "microchip,sam9x60-i2c";
+		reg = <0x600 0x200>;
+		interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx0_default>;
+		atmel,fifo-size = <16>;
+		i2c-analog-filter;
+		i2c-digital-filter;
+		i2c-digital-filter-width-ns = <35>;
+		status = "okay";
+
+		eeprom@53 {
+			compatible = "atmel,24c32";
+			reg = <0x53>;
+			pagesize = <16>;
+			size = <128>;
+			status = "okay";
+		};
+	};
+};
+
+&flx4 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
+	status = "disabled";
+
+	spi0: spi@400 {
+		compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
+		reg = <0x400 0x200>;
+		interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
+		clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+		clock-names = "spi_clk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx4_default>;
+		atmel,fifo-size = <16>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+};
+
+&flx5 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	uart1: serial@200 {
+		compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+		reg = <0x200 0x200>;
+		interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
+		dmas = <&dma0
+			(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+			 AT91_XDMAC_DT_PERID(10))>,
+		       <&dma0
+			(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+			 AT91_XDMAC_DT_PERID(11))>;
+		dma-names = "tx", "rx";
+		clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+		clock-names = "usart";
+		pinctrl-0 = <&pinctrl_flx5_default>;
+		pinctrl-names = "default";
+		atmel,use-dma-rx;
+		atmel,use-dma-tx;
+		status = "okay";
+	};
+};
+
+&flx6 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c1: i2c@600 {
+		compatible = "microchip,sam9x60-i2c";
+		reg = <0x600 0x200>;
+		interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx6_default>;
+		atmel,fifo-size = <16>;
+		i2c-analog-filter;
+		i2c-digital-filter;
+		i2c-digital-filter-width-ns = <35>;
+		status = "okay";
+
+		gpio_exp: mcp23008@20 {
+			compatible = "microchip,mcp23008";
+			reg = <0x20>;
+		};
+	};
+};
+
+&i2s {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2s_default>;
+	#sound-dai-cells = <0>;
+	status = "disabled"; /* Conflict with QSPI. */
+};
+
+&macb0 {
+	phy-mode = "rmii";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_macb0_rmii>;
+	status = "okay";
+
+	ethernet-phy@0 {
+		reg = <0x0>;
+	};
+};
+
+&pinctrl {
+	atmel,mux-mask = <
+			 /*	A	B	C	*/
+			 0xFFFFFE7F 0xC0E0397F 0xEF00019D	/* pioA */
+			 0x03FFFFFF 0x02FC7E68 0x00780000	/* pioB */
+			 0xffffffff 0xF83FFFFF 0xB800F3FC	/* pioC */
+			 0x003FFFFF 0x003F8000 0x00000000	/* pioD */
+			 >;
+
+	adc {
+		pinctrl_adc_default: adc_default {
+			atmel,pins = <AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_adtrg_default: adtrg_default {
+			atmel,pins = <AT91_PIOB 18 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
+		};
+	};
+
+	dbgu {
+		pinctrl_dbgu: dbgu-0 {
+			atmel,pins = <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+				      AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+	};
+
+	i2s {
+		pinctrl_i2s_default: i2s {
+			atmel,pins =
+				<AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE		/* I2SCK */
+				 AT91_PIOB 20 AT91_PERIPH_B AT91_PINCTRL_NONE		/* I2SWS */
+				 AT91_PIOB 21 AT91_PERIPH_B AT91_PINCTRL_NONE		/* I2SDIN */
+				 AT91_PIOB 22 AT91_PERIPH_B AT91_PINCTRL_NONE		/* I2SDOUT */
+				 AT91_PIOB 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;		/* I2SMCK */
+		};
+	};
+
+	qspi {
+		pinctrl_qspi: qspi {
+			atmel,pins =
+				<AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_SLEWRATE_DIS
+				 AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_SLEWRATE_DIS
+				 AT91_PIOB 21 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOB 22 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOB 23 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOB 24 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_SLEWRATE_DIS)>;
+		};
+	};
+
+	nand {
+		pinctrl_nand_oe_we: nand-oe-we-0 {
+			atmel,pins =
+				<AT91_PIOD 0 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 1 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>;
+		};
+
+		pinctrl_nand_rb: nand-rb-0 {
+			atmel,pins =
+				<AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+		};
+
+		pinctrl_nand_cs: nand-cs-0 {
+			atmel,pins =
+				<AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+		};
+	};
+
+	ebi {
+		pinctrl_ebi_data_0_7: ebi-data-lsb-0 {
+			atmel,pins =
+				<AT91_PIOD 6 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 7 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 8 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 9 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 10 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 11 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 12 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 13 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>;
+		};
+
+		pinctrl_ebi_data_0_15: ebi-data-msb-0 {
+			atmel,pins =
+				<AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 19 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_ebi_addr_nand: ebi-addr-0 {
+			atmel,pins =
+				<AT91_PIOD 2 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 3 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>;
+		};
+	};
+
+	flexcom {
+		pinctrl_flx0_default: flx0_twi {
+			atmel,pins =
+				<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+				 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+		};
+
+		pinctrl_flx4_default: flx4_spi {
+			atmel,pins =
+				<AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_flx5_default: flx_uart {
+			atmel,pins =
+				<AT91_PIOA 7 AT91_PERIPH_C AT91_PINCTRL_NONE
+				 AT91_PIOA 8 AT91_PERIPH_B AT91_PINCTRL_NONE
+				 AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE
+				 AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_flx6_default: flx6_twi {
+			atmel,pins =
+				<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+				 AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+		};
+	};
+
+	classd {
+		pinctrl_classd_default: classd {
+			atmel,pins =
+				<AT91_PIOA 24 AT91_PERIPH_C AT91_PINCTRL_PULL_UP
+				 AT91_PIOA 25 AT91_PERIPH_C AT91_PINCTRL_PULL_UP
+				 AT91_PIOA 26 AT91_PERIPH_C AT91_PINCTRL_PULL_UP
+				 AT91_PIOA 27 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>;
+		};
+	};
+
+	can0 {
+		pinctrl_can0_rx_tx: can0_rx_tx {
+			atmel,pins =
+				<AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANRX0 */
+				 AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANTX0 */
+				 AT91_PIOD 20 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN	/* Enable CAN0 mux */
+				 AT91_PIOD 21 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN>;	/* Enable CAN Transceivers */
+		};
+	};
+
+	can1 {
+		pinctrl_can1_rx_tx: can1_rx_tx {
+			atmel,pins =
+				<AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANRX1 RXD1 */
+				 AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANTX1 TXD1 */
+				 AT91_PIOD 19 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN	/* Enable CAN1 mux */
+				 AT91_PIOD 21 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN>;	/* Enable CAN Transceivers */
+		};
+	};
+
+	macb0 {
+		pinctrl_macb0_rmii: macb0_rmii-0 {
+			atmel,pins =
+				<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB0 periph A */
+				 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB1 periph A */
+				 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB2 periph A */
+				 AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB3 periph A */
+				 AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB4 periph A */
+				 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB5 periph A */
+				 AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB6 periph A */
+				 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB7 periph A */
+				 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A */
+				 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB10 periph A */
+		};
+	};
+
+	pwm0 {
+		pinctrl_pwm0_0: pwm0_0 {
+			atmel,pins = <AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_pwm0_1: pwm0_1 {
+			atmel,pins = <AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_pwm0_2: pwm0_2 {
+			atmel,pins = <AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_pwm0_3: pwm0_3 {
+			atmel,pins = <AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+	};
+
+	sdmmc0 {
+		pinctrl_sdmmc0_default: sdmmc0 {
+			atmel,pins =
+				<AT91_PIOA 17 AT91_PERIPH_A (AT91_PINCTRL_DRIVE_STRENGTH_HI)				/* PA17 CK  periph A with pullup */
+				 AT91_PIOA 16 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA16 CMD periph A with pullup */
+				 AT91_PIOA 15 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA15 DAT0 periph A */
+				 AT91_PIOA 18 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA18 DAT1 periph A with pullup */
+				 AT91_PIOA 19 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA19 DAT2 periph A with pullup */
+				 AT91_PIOA 20 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)>;	/* PA20 DAT3 periph A with pullup */
+		};
+	};
+
+	gpio_keys {
+		pinctrl_key_gpio_default: pinctrl_key_gpio {
+			atmel,pins = <AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+}; /* pinctrl */
+
+&pmc {
+	atmel,osc-bypass;
+};
+
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_0 &pinctrl_pwm0_1 &pinctrl_pwm0_2 &pinctrl_pwm0_3>;
+	status = "disabled"; /* Conflict with leds. */
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc0_default>;
+	status = "okay";
+	cd-gpios = <&pioA 23 GPIO_ACTIVE_LOW>;
+	disable-wp;
+};
+
+&qspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi>;
+	status = "okay"; /* Conflict with i2s. */
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <80000000>;
+		m25p,fast-read;
+
+		at91bootstrap@0 {
+			label = "qspi: at91bootstrap";
+			reg = <0x0 0x40000>;
+		};
+
+		bootloader@40000 {
+			label = "qspi: bootloader";
+			reg = <0x40000 0xc0000>;
+		};
+
+		bootloaderenvred@100000 {
+			label = "qspi: bootloader env redundant";
+			reg = <0x100000 0x40000>;
+		};
+
+		bootloaderenv@140000 {
+			label = "qspi: bootloader env";
+			reg = <0x140000 0x40000>;
+		};
+
+		dtb@180000 {
+			label = "qspi: device tree";
+			reg = <0x180000 0x80000>;
+		};
+
+		kernel@200000 {
+			label = "qspi: kernel";
+			reg = <0x200000 0x600000>;
+		};
+	};
+};
+
+&shutdown_controller {
+	atmel,shdwc-debouncer = <976>;
+	status = "okay";
+
+	input@0 {
+		reg = <0>;
+	};
+};
+
+&tcb0 {
+	timer0: timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer1: timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&usb1 {
+	num-ports = <3>;
+	atmel,vbus-gpio = <0
+			   &pioD 15 GPIO_ACTIVE_HIGH
+			   &pioD 16 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
index 7788d5db65c2..6281590150c8 100644
--- a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
+++ b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
@@ -24,6 +24,10 @@
 	};
 
 	ahb {
+		sdmmc0: sdio-host@a0000000 {
+			microchip,sdcal-inverted;
+		};
+
 		apb {
 			qspi1: spi@f0024000 {
 				pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
index fca5716ce44f..b0853bf7901c 100644
--- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
@@ -131,6 +131,9 @@
 					interrupts = <20 IRQ_TYPE_LEVEL_HIGH 7>;
 					dmas = <0>, <0>;
 					dma-names = "tx", "rx";
+					i2c-analog-filter;
+					i2c-digital-filter;
+					i2c-digital-filter-width-ns = <35>;
 					#address-cells = <1>;
 					#size-cells = <0>;
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
@@ -246,6 +249,9 @@
 
 			i2c1: i2c@fc028000 {
 				dmas = <0>, <0>;
+				i2c-analog-filter;
+				i2c-digital-filter;
+				i2c-digital-filter-width-ns = <35>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_i2c1_default>;
 				status = "okay";
diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi
new file mode 100644
index 000000000000..db3e2239eee8
--- /dev/null
+++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi
@@ -0,0 +1,304 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sama5d27_wlsom1.dtsi - Device Tree file for SAMA5D27 WLSOM1
+ *
+ * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Nicolas Ferre <nicolas.ferre@microcihp.com>
+ * Author: Eugen Hristev <eugen.hristev@microcihp.com>
+ */
+#include "sama5d2.dtsi"
+#include "sama5d2-pinfunc.h"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/mfd/atmel-flexcom.h>
+#include <dt-bindings/pinctrl/at91.h>
+
+/ {
+	model = "Microchip SAMA5D27 WLSOM1";
+	compatible = "microchip,sama5d27-wlsom1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <24000000>;
+		};
+	};
+};
+
+&flx1 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+
+	uart6: serial@200 {
+		compatible = "atmel,at91sam9260-usart";
+		reg = <0x200 0x200>;
+		interrupts = <20 IRQ_TYPE_LEVEL_HIGH 7>;
+		dmas = <&dma0
+			(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+			 AT91_XDMAC_DT_PERID(13))>,
+		       <&dma0
+			(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+			 AT91_XDMAC_DT_PERID(14))>;
+		dma-names = "tx", "rx";
+		clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
+		clock-names = "usart";
+		pinctrl-0 = <&pinctrl_flx1_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&i2c0 {
+	pinctrl-0 = <&pinctrl_i2c0_default>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2c1 {
+	dmas = <0>, <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	status = "okay";
+
+	mcp16502@5b {
+		compatible = "microchip,mcp16502";
+		reg = <0x5b>;
+		status = "okay";
+		lpm-gpios = <&pioBU 0 GPIO_ACTIVE_LOW>;
+
+		regulators {
+			vdd_3v3: VDD_IO {
+				regulator-name = "VDD_IO";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3700000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-mode = <4>;
+				};
+			};
+
+			vddio_ddr: VDD_DDR {
+				regulator-name = "VDD_DDR";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1200000>;
+					regulator-changeable-in-suspend;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1200000>;
+					regulator-changeable-in-suspend;
+					regulator-mode = <4>;
+				};
+			};
+
+			vdd_core: VDD_CORE {
+				regulator-name = "VDD_CORE";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-mode = <4>;
+				};
+			};
+
+			vdd_ddr: VDD_OTHER {
+				regulator-name = "VDD_OTHER";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+					regulator-changeable-in-suspend;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+					regulator-changeable-in-suspend;
+					regulator-mode = <4>;
+				};
+			};
+
+			LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3700000>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3700000>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&macb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_macb0_default>;
+	phy-mode = "rmii";
+
+	ethernet-phy@0 {
+		reg = <0x0>;
+		interrupt-parent = <&pioA>;
+		interrupts = <PIN_PB24 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_macb0_phy_irq>;
+	};
+};
+
+&pmc {
+	atmel,osc-bypass;
+};
+
+&qspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi1_default>;
+	status = "disabled";
+
+	qspi1_flash: spi_flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <80000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+		m25p,fast-read;
+		status = "disabled";
+
+		at91bootstrap@0 {
+			label = "at91bootstrap";
+			reg = <0x0 0x40000>;
+		};
+
+		bootloader@40000 {
+			label = "bootloader";
+			reg = <0x40000 0xc0000>;
+		};
+
+		bootloaderenvred@100000 {
+			label = "bootloader env redundant";
+			reg = <0x100000 0x40000>;
+		};
+
+		bootloaderenv@140000 {
+			label = "bootloader env";
+			reg = <0x140000 0x40000>;
+		};
+
+		dtb@180000 {
+			label = "device tree";
+			reg = <0x180000 0x80000>;
+		};
+
+		kernel@200000 {
+			label = "kernel";
+			reg = <0x200000 0x600000>;
+		};
+	};
+};
+
+&pioA {
+	pinctrl_flx1_default: flx1_usart_default {
+		pinmux = <PIN_PA24__FLEXCOM1_IO0>,
+			 <PIN_PA23__FLEXCOM1_IO1>,
+			 <PIN_PA25__FLEXCOM1_IO3>,
+			 <PIN_PA26__FLEXCOM1_IO4>;
+		bias-disable;
+	};
+
+	pinctrl_i2c0_default: i2c0_default {
+		pinmux = <PIN_PD21__TWD0>,
+			 <PIN_PD22__TWCK0>;
+		bias-disable;
+	};
+
+	pinctrl_i2c1_default: i2c1_default {
+		pinmux = <PIN_PD19__TWD1>,
+			 <PIN_PD20__TWCK1>;
+		bias-disable;
+	};
+
+	pinctrl_macb0_default: macb0_default {
+		pinmux = <PIN_PB14__GTXCK>,
+			 <PIN_PB15__GTXEN>,
+			 <PIN_PB16__GRXDV>,
+			 <PIN_PB17__GRXER>,
+			 <PIN_PB18__GRX0>,
+			 <PIN_PB19__GRX1>,
+			 <PIN_PB20__GTX0>,
+			 <PIN_PB21__GTX1>,
+			 <PIN_PB22__GMDC>,
+			 <PIN_PB23__GMDIO>;
+		bias-disable;
+	};
+
+	pinctrl_macb0_phy_irq: macb0_phy_irq {
+		pinmux = <PIN_PB24__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_qspi1_default: qspi1_default {
+		pinmux = <PIN_PB5__QSPI1_SCK>,
+			 <PIN_PB6__QSPI1_CS>,
+			 <PIN_PB7__QSPI1_IO0>,
+			 <PIN_PB8__QSPI1_IO1>,
+			 <PIN_PB9__QSPI1_IO2>,
+			 <PIN_PB10__QSPI1_IO3>;
+		bias-pull-up;
+	};
+};
+
diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
new file mode 100644
index 000000000000..0b9fa2942dff
--- /dev/null
+++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
@@ -0,0 +1,270 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sama5d27_wlsom1_ek.dts - Device Tree file for SAMA5D27 WLSOM1 EK
+ *
+ * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Nicolas Ferre <nicolas.ferre@microcihp.com>
+ */
+/dts-v1/;
+#include "at91-sama5d27_wlsom1.dtsi"
+
+/ {
+	model = "Microchip SAMA5D27 WLSOM1 EK";
+	compatible = "microchip,sama5d27-wlsom1-ek", "microchip,sama5d27-wlsom1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
+
+	aliases {
+		serial0 = &uart0;	/* DBGU */
+		serial1 = &uart6;	/* BT */
+		serial2 = &uart5;	/* mikro BUS 2 */
+		serial3 = &uart3;	/* mikro BUS 1 */
+		i2c1	= &i2c1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+		status = "okay";
+
+		sw4 {
+			label = "USER BUTTON";
+			gpios = <&pioA PIN_PB2 GPIO_ACTIVE_LOW>;
+			linux,code = <0x104>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led_gpio_default>;
+		status = "okay";
+
+		red {
+			label = "red";
+			gpios = <&pioA PIN_PA6 GPIO_ACTIVE_HIGH>;
+		};
+
+		green {
+			label = "green";
+			gpios = <&pioA PIN_PA7 GPIO_ACTIVE_HIGH>;
+		};
+
+		blue {
+			label = "blue";
+			gpios = <&pioA PIN_PA8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&adc {
+	vddana-supply = <&vdd_3v3>;
+	vref-supply = <&vdd_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc_default>;
+	status = "okay";
+};
+
+&flx0 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	uart5: serial@200 {
+		compatible = "atmel,at91sam9260-usart";
+		reg = <0x200 0x200>;
+		interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
+		dmas = <&dma0
+			(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+			 AT91_XDMAC_DT_PERID(11))>,
+		       <&dma0
+			(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+			 AT91_XDMAC_DT_PERID(12))>;
+		dma-names = "tx", "rx";
+		clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
+		clock-names = "usart";
+		pinctrl-0 = <&pinctrl_flx0_default>;
+		pinctrl-names = "default";
+		atmel,use-dma-rx;
+		atmel,use-dma-tx;
+		status = "okay";
+	};
+};
+
+&flx1 {
+	status = "okay";
+
+	uart6: serial@200 {
+		atmel,use-dma-rx;
+		atmel,use-dma-tx;
+		status = "okay";
+	};
+};
+
+&macb0 {
+	status = "okay";
+};
+
+&pioA {
+	/*
+	 * There is no real pinmux for ADC, if the pin
+	 * is not requested by another peripheral then
+	 * the muxing is done when channel is enabled.
+	 * Requesting pins for ADC is GPIO is
+	 * encouraged to prevent conflicts and to
+	 * disable bias in order to be in the same
+	 * state when the pin is not muxed to the adc.
+	 */
+	pinctrl_adc_default: adc_default {
+		pinmux = <PIN_PD25__GPIO>,
+			 <PIN_PD26__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_flx0_default: flx0_usart_default {
+		pinmux = <PIN_PB28__FLEXCOM0_IO0>,
+			 <PIN_PB29__FLEXCOM0_IO1>;
+		bias-disable;
+	};
+
+	pinctrl_key_gpio_default: key_gpio_default {
+		pinmux = <PIN_PB2__GPIO>;
+		bias-pull-up;
+	};
+
+	pinctrl_led_gpio_default: led_gpio_default {
+		pinmux = <PIN_PA6__GPIO>,
+			 <PIN_PA7__GPIO>,
+			 <PIN_PA8__GPIO>;
+		bias-pull-down;
+	};
+
+	pinctrl_sdmmc0_default: sdmmc0_default {
+		cmd_data {
+			pinmux = <PIN_PA1__SDMMC0_CMD>,
+				 <PIN_PA2__SDMMC0_DAT0>,
+				 <PIN_PA3__SDMMC0_DAT1>,
+				 <PIN_PA4__SDMMC0_DAT2>,
+				 <PIN_PA5__SDMMC0_DAT3>;
+			bias-disable;
+		};
+
+		ck_cd_vddsel {
+			pinmux = <PIN_PA0__SDMMC0_CK>,
+				 <PIN_PA11__SDMMC0_VDDSEL>,
+				 <PIN_PA12__SDMMC0_WP>,
+				 <PIN_PA13__SDMMC0_CD>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_uart0_default: uart0_default {
+		pinmux = <PIN_PB26__URXD0>,
+			 <PIN_PB27__UTXD0>;
+		bias-disable;
+	};
+
+	pinctrl_uart3_default: uart3_default {
+		pinmux = <PIN_PB11__URXD3>,
+			 <PIN_PB12__UTXD3>;
+		bias-disable;
+	};
+
+	pinctrl_pwm0_default: pwm0_default {
+		pinmux = <PIN_PA31__PWML0>,
+			 <PIN_PA30__PWMH0>;
+		bias-disable;
+	};
+
+	pinctrl_usb_default: usb_default {
+		pinmux = <PIN_PA10__GPIO>;
+		bias-disable;
+	};
+};
+
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default>;
+	status = "okay";
+};
+
+&qspi1 {
+	status = "okay";
+
+	qspi1_flash: spi_flash@0 {
+		status = "okay";
+	};
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	mmc-ddr-3_3v;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc0_default>;
+	status = "okay";
+};
+
+&shutdown_controller {
+	atmel,shdwc-debouncer = <976>;
+	atmel,wakeup-rtc-timer;
+
+	input@0 {
+		reg = <0>;
+		atmel,wakeup-type = "low";
+	};
+};
+
+&tcb0 {
+	timer0: timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer1: timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0_default>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3_default>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+};
+
+&usb1 {
+	num-ports = <3>;
+	atmel,vbus-gpio = <0
+			   &pioA PIN_PA10 GPIO_ACTIVE_HIGH
+			   0
+			  >;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_default>;
+	status = "okay";
+};
+
+&usb2 {
+	phy_type = "hsic";
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/at91-smartkiz.dts b/arch/arm/boot/dts/at91-smartkiz.dts
new file mode 100644
index 000000000000..106f23ba4a3b
--- /dev/null
+++ b/arch/arm/boot/dts/at91-smartkiz.dts
@@ -0,0 +1,109 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017-2018 Overkiz SAS
+ *   Author: Mickael Gardet <m.gardet@overkiz.com>
+ *           Kévin Raymond <k.raymond@overkiz.com>
+ *           Dorian Rocipon <d.rocipon@overkiz.com>
+ */
+/dts-v1/;
+#include "at91-kizboxmini-common.dtsi"
+
+/ {
+	model = "Overkiz SmartKiz";
+	compatible = "overkiz,smartkiz", "atmel,at91sam9g25",
+		     "atmel,at91sam9x5", "atmel,at91sam9";
+
+	clocks {
+		adc_op_clk {
+			status = "okay";
+		};
+	};
+
+	aliases {
+		serial5 = &uart0;
+	};
+
+	pio_keys {
+		hk_reset {
+			label = "HK_RESET";
+			gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
+		};
+
+		power_rf {
+			label = "POWER_RF";
+			gpios = <&pioA 20 GPIO_ACTIVE_HIGH>;
+		};
+
+		power_wifi {
+			label = "POWER_WIFI";
+			gpios = <&pioA 21 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&pinctrl {
+	i2c1 {
+		pinctrl_i2c1: i2c1-0 {
+			atmel,pins =
+				<AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_PULL_UP
+				AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>;
+		};
+	};
+
+	adc0 {
+		pinctrl_adc0_ad0: adc0_ad0-0 {
+			/* pull-up disable */
+			atmel,pins = <AT91_PIOB 11 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+		pinctrl_adc0_ad5: adc0_ad5-0 {
+			/* pull-up disable */
+			atmel,pins = <AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+		pinctrl_adc0_ad6: adc0_ad6-0 {
+			/* pull-up disable */
+			atmel,pins = <AT91_PIOB 17 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+		pinctrl_adc0_ad11: adc0_ad11-0 {
+			/* pull-up disable */
+			atmel,pins = <AT91_PIOB 10 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+};
+
+&i2c1 {
+	dmas = <0>, <0>;
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "disabled";
+};
+
+&macb0 {
+	status = "disabled";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&leds {
+	blue {
+		status = "okay";
+	};
+};
+
+&adc0 {
+	atmel,adc-vref = <2500>;
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&pinctrl_adc0_ad0
+		&pinctrl_adc0_ad5
+		&pinctrl_adc0_ad6
+		&pinctrl_adc0_ad11
+	>;
+	atmel,adc-channels-used = <0x0861>;
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index dee9c0c8a096..6afbb48e7ff0 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -187,7 +187,7 @@
 				usart0 {
 					pinctrl_usart0: usart0-0 {
 						atmel,pins =
-							<AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE
+							<AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
 							 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
@@ -221,7 +221,7 @@
 				usart1 {
 					pinctrl_usart1: usart1-0 {
 						atmel,pins =
-							<AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE
+							<AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
 							 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
@@ -239,7 +239,7 @@
 				usart2 {
 					pinctrl_usart2: usart2-0 {
 						atmel,pins =
-							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE
+							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
 							 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
@@ -257,7 +257,7 @@
 				usart3 {
 					pinctrl_usart3: usart3-0 {
 						atmel,pins =
-							<AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE
+							<AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
 							 AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
@@ -275,7 +275,7 @@
 				uart0 {
 					pinctrl_uart0: uart0-0 {
 						atmel,pins =
-							<AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_NONE
+							<AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP
 							 AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
 					};
 				};
@@ -283,7 +283,7 @@
 				uart1 {
 					pinctrl_uart1: uart1-0 {
 						atmel,pins =
-							<AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE
+							<AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
 							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 				};
@@ -738,7 +738,7 @@
 				status = "disabled";
 			};
 
-			watchdog@fffffd40 {
+			watchdog: watchdog@fffffd40 {
 				compatible = "atmel,at91sam9260-wdt";
 				reg = <0xfffffd40 0x10>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
@@ -793,7 +793,7 @@
 		};
 	};
 
-	i2c-gpio-0 {
+	i2c_gpio0: i2c-gpio-0 {
 		compatible = "i2c-gpio";
 		gpios = <&pioA 23 GPIO_ACTIVE_HIGH /* sda */
 			 &pioA 24 GPIO_ACTIVE_HIGH /* scl */
diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi
index dba025a98527..5ed3d745ac86 100644
--- a/arch/arm/boot/dts/at91sam9261.dtsi
+++ b/arch/arm/boot/dts/at91sam9261.dtsi
@@ -329,7 +329,7 @@
 				usart0 {
 					pinctrl_usart0: usart0-0 {
 						atmel,pins =
-							<AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
 							<AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
@@ -347,7 +347,7 @@
 				usart1 {
 					pinctrl_usart1: usart1-0 {
 						atmel,pins =
-							<AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
 							<AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
@@ -365,7 +365,7 @@
 				usart2 {
 					pinctrl_usart2: usart2-0 {
 						atmel,pins =
-							<AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
 							<AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
index 99678abdda93..5c990cfae254 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -183,7 +183,7 @@
 				usart0 {
 					pinctrl_usart0: usart0-0 {
 						atmel,pins =
-							<AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE
+							<AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
 							 AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
@@ -201,7 +201,7 @@
 				usart1 {
 					pinctrl_usart1: usart1-0 {
 						atmel,pins =
-							<AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_NONE
+							<AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
 							 AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
@@ -219,7 +219,7 @@
 				usart2 {
 					pinctrl_usart2: usart2-0 {
 						atmel,pins =
-							<AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_NONE
+							<AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
 							 AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index 691c95ea6175..fd179097a4bf 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -556,7 +556,7 @@
 				usart0 {
 					pinctrl_usart0: usart0-0 {
 						atmel,pins =
-							<AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE
+							<AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
 							 AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
@@ -574,7 +574,7 @@
 				usart1 {
 					pinctrl_usart1: usart1-0 {
 						atmel,pins =
-							<AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE
+							<AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
 							 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
@@ -592,7 +592,7 @@
 				usart2 {
 					pinctrl_usart2: usart2-0 {
 						atmel,pins =
-							<AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE
+							<AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
 							 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
@@ -610,7 +610,7 @@
 				usart3 {
 					pinctrl_usart3: usart3-0 {
 						atmel,pins =
-							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE
+							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
 							 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi
index 8643b7151565..ea024e4b6e09 100644
--- a/arch/arm/boot/dts/at91sam9rl.dtsi
+++ b/arch/arm/boot/dts/at91sam9rl.dtsi
@@ -682,7 +682,7 @@
 				usart0 {
 					pinctrl_usart0: usart0-0 {
 						atmel,pins =
-							<AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
 							<AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
@@ -721,7 +721,7 @@
 				usart1 {
 					pinctrl_usart1: usart1-0 {
 						atmel,pins =
-							<AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
 							<AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
@@ -744,7 +744,7 @@
 				usart2 {
 					pinctrl_usart2: usart2-0 {
 						atmel,pins =
-							<AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
 							<AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
@@ -767,7 +767,7 @@
 				usart3 {
 					pinctrl_usart3: usart3-0 {
 						atmel,pins =
-							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
 							<AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
index 8eedd6eb409b..d1e684d0acfd 100644
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ b/arch/arm/boot/dts/bcm2711.dtsi
@@ -12,26 +12,6 @@
 
 	interrupt-parent = <&gicv2>;
 
-	reserved-memory {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges;
-
-		/*
-		 * arm64 reserves the CMA by default somewhere in ZONE_DMA32,
-		 * that's not good enough for the BCM2711 as some devices can
-		 * only address the lower 1G of memory (ZONE_DMA).
-		 */
-		linux,cma {
-			compatible = "shared-dma-pool";
-			size = <0x2000000>; /* 32MB */
-			alloc-ranges = <0x0 0x00000000 0x40000000>;
-			reusable;
-			linux,cma-default;
-		};
-	};
-
-
 	soc {
 		/*
 		 * Defined ranges:
@@ -123,10 +103,8 @@
 		};
 
 		rng@7e104000 {
-			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
-
-			/* RNG is incompatible with brcm,bcm2835-rng */
-			status = "disabled";
+			compatible = "brcm,bcm2711-rng200";
+			reg = <0x7e104000 0x28>;
 		};
 
 		uart2: serial@7e201400 {
@@ -342,7 +320,36 @@
 		#address-cells = <2>;
 		#size-cells = <1>;
 
-		ranges = <0x0 0x7c000000  0x0 0xfc000000  0x03800000>;
+		ranges = <0x0 0x7c000000  0x0 0xfc000000  0x03800000>,
+			 <0x6 0x00000000  0x6 0x00000000  0x40000000>;
+
+		pcie0: pcie@7d500000 {
+			compatible = "brcm,bcm2711-pcie";
+			reg = <0x0 0x7d500000 0x9310>;
+			device_type = "pci";
+			#address-cells = <3>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pcie", "msi";
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143
+							IRQ_TYPE_LEVEL_HIGH>;
+			msi-controller;
+			msi-parent = <&pcie0>;
+
+			ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000
+				  0x0 0x04000000>;
+			/*
+			 * The wrapper around the PCIe block has a bug
+			 * preventing it from accessing beyond the first 3GB of
+			 * memory.
+			 */
+			dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000
+				      0x0 0xc0000000>;
+			brcm,enable-ssc;
+		};
 
 		genet: ethernet@7d580000 {
 			compatible = "brcm,bcm2711-genet-v5";
@@ -840,6 +847,19 @@
 	};
 };
 
+&rmem {
+	#address-cells = <2>;
+};
+
+&cma {
+	/*
+	 * arm64 reserves the CMA by default somewhere in ZONE_DMA32,
+	 * that's not good enough for the BCM2711 as some devices can
+	 * only address the lower 1G of memory (ZONE_DMA).
+	 */
+	alloc-ranges = <0x0 0x00000000 0x40000000>;
+};
+
 &i2c0 {
 	compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
 	interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/bcm2835-common.dtsi b/arch/arm/boot/dts/bcm2835-common.dtsi
index fe1ab40c7f22..2b1d9d4c0cde 100644
--- a/arch/arm/boot/dts/bcm2835-common.dtsi
+++ b/arch/arm/boot/dts/bcm2835-common.dtsi
@@ -70,6 +70,12 @@
 			system-power-controller;
 		};
 
+		rng@7e104000 {
+			compatible = "brcm,bcm2835-rng";
+			reg = <0x7e104000 0x10>;
+			interrupts = <2 29>;
+		};
+
 		pixelvalve@7e206000 {
 			compatible = "brcm,bcm2835-pixelvalve0";
 			reg = <0x7e206000 0x100>;
diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi
index 839491628e87..e1abe8c730ce 100644
--- a/arch/arm/boot/dts/bcm283x.dtsi
+++ b/arch/arm/boot/dts/bcm283x.dtsi
@@ -30,6 +30,19 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	rmem: reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		cma: linux,cma {
+			compatible = "shared-dma-pool";
+			size = <0x4000000>; /* 64MB */
+			reusable;
+			linux,cma-default;
+		};
+	};
+
 	thermal-zones {
 		cpu_thermal: cpu-thermal {
 			polling-delay-passive = <0>;
@@ -84,12 +97,6 @@
 				<&dsi1 0>, <&dsi1 1>, <&dsi1 2>;
 		};
 
-		rng@7e104000 {
-			compatible = "brcm,bcm2835-rng";
-			reg = <0x7e104000 0x10>;
-			interrupts = <2 29>;
-		};
-
 		mailbox: mailbox@7e00b880 {
 			compatible = "brcm,bcm2835-mbox";
 			reg = <0x7e00b880 0x40>;
diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/bcm958625hr.dts
index a2c9de35ddfb..536fb24f38bb 100644
--- a/arch/arm/boot/dts/bcm958625hr.dts
+++ b/arch/arm/boot/dts/bcm958625hr.dts
@@ -55,18 +55,9 @@
 		priority = <200>;
 	};
 
-	/* Hardware I2C block cannot do more than 63 bytes per transfer,
-	 * which would prevent reading from a SFP's EEPROM (256 byte).
-	 */
-	i2c1: i2c {
-		compatible = "i2c-gpio";
-		sda-gpios = <&gpioa 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpioa 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	};
-
 	sfp: sfp {
 		compatible = "sff,sfp";
-		i2c-bus = <&i2c1>;
+		i2c-bus = <&i2c0>;
 		mod-def0-gpios = <&gpioa 28 GPIO_ACTIVE_LOW>;
 		los-gpios = <&gpioa 24 GPIO_ACTIVE_HIGH>;
 		tx-fault-gpios = <&gpioa 30 GPIO_ACTIVE_HIGH>;
@@ -74,6 +65,10 @@
 	};
 };
 
+&i2c0 {
+	status = "okay";
+};
+
 &amac0 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/dm3725.dtsi b/arch/arm/boot/dts/dm3725.dtsi
new file mode 100644
index 000000000000..d24e906a14b1
--- /dev/null
+++ b/arch/arm/boot/dts/dm3725.dtsi
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 André Hentschel <nerv@dawncrow.de>
+ */
+
+#include "omap36xx.dtsi"
+
+&sgx_module {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/dra7-evm-common.dtsi b/arch/arm/boot/dts/dra7-evm-common.dtsi
index 82eeba8faef1..23244b5a9942 100644
--- a/arch/arm/boot/dts/dra7-evm-common.dtsi
+++ b/arch/arm/boot/dts/dra7-evm-common.dtsi
@@ -4,7 +4,7 @@
  */
 
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clk/ti-dra7-atl.h>
+#include <dt-bindings/clock/ti-dra7-atl.h>
 #include <dt-bindings/input/input.h>
 
 / {
diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi
index 7e7aa101d8a4..fc418834890d 100644
--- a/arch/arm/boot/dts/dra7-l4.dtsi
+++ b/arch/arm/boot/dts/dra7-l4.dtsi
@@ -186,7 +186,6 @@
 
 		target-module@56000 {			/* 0x4a056000, ap 9 02.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "dma_system";
 			reg = <0x56000 0x4>,
 			      <0x5602c 0x4>,
 			      <0x56028 0x4>;
@@ -212,7 +211,7 @@
 			ranges = <0x0 0x56000 0x1000>;
 
 			sdma: dma-controller@0 {
-				compatible = "ti,omap4430-sdma";
+				compatible = "ti,omap4430-sdma", "ti,omap-sdma";
 				reg = <0x0 0x1000>;
 				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
@@ -234,7 +233,6 @@
 
 		target-module@80000 {			/* 0x4a080000, ap 13 20.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "ocp2scp1";
 			reg = <0x80000 0x4>,
 			      <0x80010 0x4>,
 			      <0x80014 0x4>;
@@ -302,7 +300,6 @@
 
 		target-module@90000 {			/* 0x4a090000, ap 59 42.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "ocp2scp3";
 			reg = <0x90000 0x4>,
 			      <0x90010 0x4>,
 			      <0x90014 0x4>;
@@ -394,7 +391,6 @@
 
 		target-module@d9000 {			/* 0x4a0d9000, ap 17 72.0 */
 			compatible = "ti,sysc-omap4-sr", "ti,sysc";
-			ti,hwmods = "smartreflex_mpu";
 			reg = <0xd9038 0x4>;
 			reg-names = "sysc";
 			ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
@@ -414,7 +410,6 @@
 
 		target-module@dd000 {			/* 0x4a0dd000, ap 19 18.0 */
 			compatible = "ti,sysc-omap4-sr", "ti,sysc";
-			ti,hwmods = "smartreflex_core";
 			reg = <0xdd038 0x4>;
 			reg-names = "sysc";
 			ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
@@ -471,7 +466,6 @@
 
 		target-module@f6000 {			/* 0x4a0f6000, ap 25 78.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "spinlock";
 			reg = <0xf6000 0x4>,
 			      <0xf6010 0x4>,
 			      <0xf6014 0x4>;
@@ -1233,7 +1227,6 @@
 
 		target-module@3e000 {			/* 0x4803e000, ap 11 56.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer9";
 			reg = <0x3e000 0x4>,
 			      <0x3e010 0x4>;
 			reg-names = "rev", "sysc";
@@ -1748,7 +1741,6 @@
 
 		target-module@78000 {			/* 0x48078000, ap 39 0a.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "elm";
 			reg = <0x78000 0x4>,
 			      <0x78010 0x4>,
 			      <0x78014 0x4>;
@@ -1842,7 +1834,6 @@
 
 		target-module@86000 {			/* 0x48086000, ap 41 5e.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer10";
 			reg = <0x86000 0x4>,
 			      <0x86010 0x4>;
 			reg-names = "rev", "sysc";
@@ -1870,7 +1861,6 @@
 
 		target-module@88000 {			/* 0x48088000, ap 43 66.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer11";
 			reg = <0x88000 0x4>,
 			      <0x88010 0x4>;
 			reg-names = "rev", "sysc";
@@ -2044,6 +2034,37 @@
 				 <0x00001000 0x000a5000 0x00001000>;
 		};
 
+		des_target: target-module@a5000 {	/* 0x480a5000 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0xa5030 0x4>,
+			      <0xa5034 0x4>,
+			      <0xa5038 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4sec_clkdm */
+			clocks = <&l4sec_clkctrl DRA7_L4SEC_DES_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0xa5000 0x00001000>;
+
+			des: des@0 {
+				compatible = "ti,omap4-des";
+				reg = <0 0xa0>;
+				interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&sdma_xbar 117>, <&sdma_xbar 116>;
+				dma-names = "tx", "rx";
+				clocks = <&l3_iclk_div>;
+				clock-names = "fck";
+			};
+		};
+
 		target-module@a8000 {			/* 0x480a8000, ap 59 1a.0 */
 			compatible = "ti,sysc";
 			status = "disabled";
@@ -2490,7 +2511,6 @@
 
 		target-module@3e000 {			/* 0x4843e000, ap 25 30.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "epwmss0";
 			reg = <0x3e000 0x4>,
 			      <0x3e004 0x4>;
 			reg-names = "rev", "sysc";
@@ -2537,7 +2557,6 @@
 
 		target-module@40000 {			/* 0x48440000, ap 27 38.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "epwmss1";
 			reg = <0x40000 0x4>,
 			      <0x40004 0x4>;
 			reg-names = "rev", "sysc";
@@ -2584,7 +2603,6 @@
 
 		target-module@42000 {			/* 0x48442000, ap 29 20.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "epwmss2";
 			reg = <0x42000 0x4>,
 			      <0x42004 0x4>;
 			reg-names = "rev", "sysc";
@@ -3326,7 +3344,6 @@
 
 		target-module@20000 {			/* 0x48820000, ap 5 08.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer5";
 			reg = <0x20000 0x4>,
 			      <0x20010 0x4>;
 			reg-names = "rev", "sysc";
@@ -3354,7 +3371,6 @@
 
 		target-module@22000 {			/* 0x48822000, ap 7 24.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer6";
 			reg = <0x22000 0x4>,
 			      <0x22010 0x4>;
 			reg-names = "rev", "sysc";
@@ -3382,7 +3398,6 @@
 
 		target-module@24000 {			/* 0x48824000, ap 9 26.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer7";
 			reg = <0x24000 0x4>,
 			      <0x24010 0x4>;
 			reg-names = "rev", "sysc";
@@ -3410,7 +3425,6 @@
 
 		target-module@26000 {			/* 0x48826000, ap 11 0c.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer8";
 			reg = <0x26000 0x4>,
 			      <0x26010 0x4>;
 			reg-names = "rev", "sysc";
@@ -3438,7 +3452,6 @@
 
 		target-module@28000 {			/* 0x48828000, ap 13 16.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer13";
 			reg = <0x28000 0x4>,
 			      <0x28010 0x4>;
 			reg-names = "rev", "sysc";
@@ -3466,7 +3479,6 @@
 
 		target-module@2a000 {			/* 0x4882a000, ap 15 10.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer14";
 			reg = <0x2a000 0x4>,
 			      <0x2a010 0x4>;
 			reg-names = "rev", "sysc";
@@ -3494,7 +3506,6 @@
 
 		target-module@2c000 {			/* 0x4882c000, ap 17 02.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer15";
 			reg = <0x2c000 0x4>,
 			      <0x2c010 0x4>;
 			reg-names = "rev", "sysc";
@@ -3522,7 +3533,6 @@
 
 		target-module@2e000 {			/* 0x4882e000, ap 19 14.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer16";
 			reg = <0x2e000 0x4>,
 			      <0x2e010 0x4>;
 			reg-names = "rev", "sysc";
@@ -4166,35 +4176,88 @@
 		};
 
 		target-module@170000 {			/* 0x48970000, ap 21 0a.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x170010 0x4>;
+			reg-names = "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&cam_clkctrl DRA7_CAM_VIP1_CLKCTRL 0>;
+			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x0 0x170000 0x10000>;
+			status = "disabled";
 		};
 
 		target-module@190000 {			/* 0x48990000, ap 23 2e.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x190010 0x4>;
+			reg-names = "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&cam_clkctrl DRA7_CAM_VIP2_CLKCTRL 0>;
+			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x0 0x190000 0x10000>;
+			status = "disabled";
 		};
 
 		target-module@1b0000 {			/* 0x489b0000, ap 25 34.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x1b0000 0x4>,
+			      <0x1b0010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&cam_clkctrl DRA7_CAM_VIP3_CLKCTRL 0>;
+			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x0 0x1b0000 0x10000>;
+			status = "disabled";
 		};
 
-		target-module@1d0000 {			/* 0x489d0000, ap 27 30.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
+		target-module@1d0010 {			/* 0x489d0000, ap 27 30.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x1d0010 0x4>;
+			reg-names = "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&vpe_clkctrl DRA7_VPE_VPE_CLKCTRL 0>;
+			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x0 0x1d0000 0x10000>;
+
+			vpe: vpe@0 {
+				compatible = "ti,dra7-vpe";
+				reg = <0x0000 0x120>,
+				      <0x0700 0x80>,
+				      <0x5700 0x18>,
+				      <0xd000 0x400>;
+				reg-names = "vpe_top",
+					    "sc",
+					    "csc",
+					    "vpdma";
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+			};
 		};
 	};
 };
@@ -4422,7 +4485,6 @@
 
 		target-module@0 {			/* 0x4ae20000, ap 19 08.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer12";
 			reg = <0x0 0x4>,
 			      <0x10 0x4>;
 			reg-names = "rev", "sysc";
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 73e5011f531a..d78b684e7fca 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -377,44 +377,120 @@
 			ti,hwmods = "dmm";
 		};
 
-		mmu0_dsp1: mmu@40d01000 {
-			compatible = "ti,dra7-dsp-iommu";
-			reg = <0x40d01000 0x100>;
-			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmu0_dsp1";
-			#iommu-cells = <0>;
-			ti,syscon-mmuconfig = <&dsp1_system 0x0>;
-			status = "disabled";
+		target-module@40d01000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x40d01000 0x4>,
+			      <0x40d01010 0x4>,
+			      <0x40d01014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			clocks = <&dsp1_clkctrl DRA7_DSP1_MMU0_DSP1_CLKCTRL 0>;
+			clock-names = "fck";
+			resets = <&prm_dsp1 1>;
+			reset-names = "rstctrl";
+			ranges = <0x0 0x40d01000 0x1000>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+
+			mmu0_dsp1: mmu@0 {
+				compatible = "ti,dra7-dsp-iommu";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+				#iommu-cells = <0>;
+				ti,syscon-mmuconfig = <&dsp1_system 0x0>;
+			};
 		};
 
-		mmu1_dsp1: mmu@40d02000 {
-			compatible = "ti,dra7-dsp-iommu";
-			reg = <0x40d02000 0x100>;
-			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmu1_dsp1";
-			#iommu-cells = <0>;
-			ti,syscon-mmuconfig = <&dsp1_system 0x1>;
-			status = "disabled";
+		target-module@40d02000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x40d02000 0x4>,
+			      <0x40d02010 0x4>,
+			      <0x40d02014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			clocks = <&dsp1_clkctrl DRA7_DSP1_MMU0_DSP1_CLKCTRL 0>;
+			clock-names = "fck";
+			resets = <&prm_dsp1 1>;
+			reset-names = "rstctrl";
+			ranges = <0x0 0x40d02000 0x1000>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+
+			mmu1_dsp1: mmu@0 {
+				compatible = "ti,dra7-dsp-iommu";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+				#iommu-cells = <0>;
+				ti,syscon-mmuconfig = <&dsp1_system 0x1>;
+			};
 		};
 
-		mmu_ipu1: mmu@58882000 {
-			compatible = "ti,dra7-iommu";
-			reg = <0x58882000 0x100>;
-			interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmu_ipu1";
-			#iommu-cells = <0>;
-			ti,iommu-bus-err-back;
-			status = "disabled";
+		target-module@58882000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x58882000 0x4>,
+			      <0x58882010 0x4>,
+			      <0x58882014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			clocks = <&ipu1_clkctrl DRA7_IPU1_MMU_IPU1_CLKCTRL 0>;
+			clock-names = "fck";
+			resets = <&prm_ipu 2>;
+			reset-names = "rstctrl";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x58882000 0x100>;
+
+			mmu_ipu1: mmu@0 {
+				compatible = "ti,dra7-iommu";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>;
+				#iommu-cells = <0>;
+				ti,iommu-bus-err-back;
+			};
 		};
 
-		mmu_ipu2: mmu@55082000 {
-			compatible = "ti,dra7-iommu";
-			reg = <0x55082000 0x100>;
-			interrupts = <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmu_ipu2";
-			#iommu-cells = <0>;
-			ti,iommu-bus-err-back;
-			status = "disabled";
+		target-module@55082000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x55082000 0x4>,
+			      <0x55082010 0x4>,
+			      <0x55082014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			clocks = <&ipu2_clkctrl DRA7_IPU2_MMU_IPU2_CLKCTRL 0>;
+			clock-names = "fck";
+			resets = <&prm_core 2>;
+			reset-names = "rstctrl";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x55082000 0x100>;
+
+			mmu_ipu2: mmu@0 {
+				compatible = "ti,dra7-iommu";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>;
+				#iommu-cells = <0>;
+				ti,iommu-bus-err-back;
+			};
 		};
 
 		abb_mpu: regulator-abb-mpu {
@@ -597,6 +673,24 @@
 			status = "disabled";
 		};
 
+		target-module@56000000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x5600fe00 0x4>,
+			      <0x5600fe10 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&gpu_clkctrl DRA7_GPU_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x56000000 0x2000000>;
+		};
+
 		crossbar_mpu: crossbar@4a002a48 {
 			compatible = "ti,irq-crossbar";
 			reg = <0x4a002a48 0x130>;
@@ -652,48 +746,96 @@
 			};
 		};
 
-		aes1: aes@4b500000 {
-			compatible = "ti,omap4-aes";
-			ti,hwmods = "aes1";
-			reg = <0x4b500000 0xa0>;
-			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&edma_xbar 111 0>, <&edma_xbar 110 0>;
-			dma-names = "tx", "rx";
-			clocks = <&l3_iclk_div>;
-			clock-names = "fck";
-		};
-
-		aes2: aes@4b700000 {
-			compatible = "ti,omap4-aes";
-			ti,hwmods = "aes2";
-			reg = <0x4b700000 0xa0>;
-			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&edma_xbar 114 0>, <&edma_xbar 113 0>;
-			dma-names = "tx", "rx";
-			clocks = <&l3_iclk_div>;
+		aes1_target: target-module@4b500000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x4b500080 0x4>,
+			      <0x4b500084 0x4>,
+			      <0x4b500088 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4sec_clkdm */
+			clocks = <&l4sec_clkctrl DRA7_L4SEC_AES1_CLKCTRL 0>;
 			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4b500000 0x1000>;
+
+			aes1: aes@0 {
+				compatible = "ti,omap4-aes";
+				reg = <0 0xa0>;
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&edma_xbar 111 0>, <&edma_xbar 110 0>;
+				dma-names = "tx", "rx";
+				clocks = <&l3_iclk_div>;
+				clock-names = "fck";
+			};
 		};
 
-		des: des@480a5000 {
-			compatible = "ti,omap4-des";
-			ti,hwmods = "des";
-			reg = <0x480a5000 0xa0>;
-			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&sdma_xbar 117>, <&sdma_xbar 116>;
-			dma-names = "tx", "rx";
-			clocks = <&l3_iclk_div>;
+		aes2_target: target-module@4b700000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x4b700080 0x4>,
+			      <0x4b700084 0x4>,
+			      <0x4b700088 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4sec_clkdm */
+			clocks = <&l4sec_clkctrl DRA7_L4SEC_AES2_CLKCTRL 0>;
 			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4b700000 0x1000>;
+
+			aes2: aes@0 {
+				compatible = "ti,omap4-aes";
+				reg = <0 0xa0>;
+				interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&edma_xbar 114 0>, <&edma_xbar 113 0>;
+				dma-names = "tx", "rx";
+				clocks = <&l3_iclk_div>;
+				clock-names = "fck";
+			};
 		};
 
-		sham: sham@53100000 {
-			compatible = "ti,omap5-sham";
-			ti,hwmods = "sham";
-			reg = <0x4b101000 0x300>;
-			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&edma_xbar 119 0>;
-			dma-names = "rx";
-			clocks = <&l3_iclk_div>;
+		sham_target: target-module@4b101000 {
+			compatible = "ti,sysc-omap3-sham", "ti,sysc";
+			reg = <0x4b101100 0x4>,
+			      <0x4b101110 0x4>,
+			      <0x4b101114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4sec_clkdm */
+			clocks = <&l4sec_clkctrl DRA7_L4SEC_SHAM_CLKCTRL 0>;
 			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4b101000 0x1000>;
+
+			sham: sham@0 {
+				compatible = "ti,omap5-sham";
+				reg = <0 0x300>;
+				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&edma_xbar 119 0>;
+				dma-names = "rx";
+				clocks = <&l3_iclk_div>;
+				clock-names = "fck";
+			};
 		};
 
 		opp_supply_mpu: opp-supply@4a003b20 {
diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi
index 8641a3d7d8ad..01558a86af82 100644
--- a/arch/arm/boot/dts/dra72-evm-common.dtsi
+++ b/arch/arm/boot/dts/dra72-evm-common.dtsi
@@ -6,7 +6,7 @@
 
 #include "dra72x.dtsi"
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clk/ti-dra7-atl.h>
+#include <dt-bindings/clock/ti-dra7-atl.h>
 
 / {
 	compatible = "ti,dra72-evm", "ti,dra722", "ti,dra72", "ti,dra7";
@@ -187,6 +187,12 @@
 		gpio = <&gpio5 8 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
+
+	clk_ov5640_fixed: clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
 };
 
 &dra7_pmx_core {
@@ -269,6 +275,23 @@
 			line-name = "vin6_sel_s0";
 		};
 	};
+
+	ov5640@3c {
+		compatible = "ovti,ov5640";
+		reg = <0x3c>;
+
+		clocks = <&clk_ov5640_fixed>;
+		clock-names = "xclk";
+
+		port {
+			csi2_cam0: endpoint {
+				remote-endpoint = <&csi2_phy0>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+
 };
 
 &uart1 {
@@ -580,3 +603,11 @@
 &pcie1_rc {
 	status = "okay";
 };
+
+&csi2_0 {
+	csi2_phy0: endpoint {
+		remote-endpoint = <&csi2_cam0>;
+		clock-lanes = <0>;
+		data-lanes = <1 2>;
+	};
+};
diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi
index f5762709c853..82b57a35abc0 100644
--- a/arch/arm/boot/dts/dra72x.dtsi
+++ b/arch/arm/boot/dts/dra72x.dtsi
@@ -17,6 +17,48 @@
 	};
 };
 
+&l4_per2 {
+	target-module@5b000 {			/* 0x4845b000, ap 59 46.0 */
+		compatible = "ti,sysc-omap4", "ti,sysc";
+		reg = <0x5b000 0x4>,
+		      <0x5b010 0x4>;
+		reg-names = "rev", "sysc";
+		ti,sysc-midle = <SYSC_IDLE_FORCE>,
+				<SYSC_IDLE_NO>;
+		ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+				<SYSC_IDLE_NO>;
+		clocks = <&cam_clkctrl DRA7_CAM_VIP2_CLKCTRL 0>;
+		clock-names = "fck";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x5b000 0x1000>;
+
+		cal: cal@0 {
+			compatible = "ti,dra72-cal";
+			reg = <0x0000 0x400>,
+			      <0x0800 0x40>,
+			      <0x0900 0x40>;
+			reg-names = "cal_top",
+				    "cal_rx_core0",
+				    "cal_rx_core1";
+			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+			ti,camerrx-control = <&scm_conf 0xE94>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				csi2_0: port@0 {
+					reg = <0>;
+				};
+				csi2_1: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+	};
+};
+
 &dss {
 	reg = <0x58000000 0x80>,
 	      <0x58004054 0x4>,
diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi
index d1b5b76bc5a8..c5abc436ca1f 100644
--- a/arch/arm/boot/dts/dra74x.dtsi
+++ b/arch/arm/boot/dts/dra74x.dtsi
@@ -66,24 +66,63 @@
 			};
 		};
 
-		mmu0_dsp2: mmu@41501000 {
-			compatible = "ti,dra7-dsp-iommu";
-			reg = <0x41501000 0x100>;
-			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmu0_dsp2";
-			#iommu-cells = <0>;
-			ti,syscon-mmuconfig = <&dsp2_system 0x0>;
-			status = "disabled";
+		target-module@41501000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x41501000 0x4>,
+			      <0x41501010 0x4>,
+			      <0x41501014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			clocks = <&dsp2_clkctrl DRA7_DSP2_MMU0_DSP2_CLKCTRL 0>;
+			clock-names = "fck";
+			resets = <&prm_dsp2 1>;
+			reset-names = "rstctrl";
+			ranges = <0x0 0x41501000 0x1000>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+
+			mmu0_dsp2: mmu@0 {
+				compatible = "ti,dra7-dsp-iommu";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+				#iommu-cells = <0>;
+				ti,syscon-mmuconfig = <&dsp2_system 0x0>;
+			};
 		};
 
-		mmu1_dsp2: mmu@41502000 {
-			compatible = "ti,dra7-dsp-iommu";
-			reg = <0x41502000 0x100>;
-			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmu1_dsp2";
-			#iommu-cells = <0>;
-			ti,syscon-mmuconfig = <&dsp2_system 0x1>;
-			status = "disabled";
+		target-module@41502000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x41502000 0x4>,
+			      <0x41502010 0x4>,
+			      <0x41502014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+
+			clocks = <&dsp2_clkctrl DRA7_DSP2_MMU0_DSP2_CLKCTRL 0>;
+			clock-names = "fck";
+			resets = <&prm_dsp2 1>;
+			reset-names = "rstctrl";
+			ranges = <0x0 0x41502000 0x1000>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+
+			mmu1_dsp2: mmu@0 {
+				compatible = "ti,dra7-dsp-iommu";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+				#iommu-cells = <0>;
+				ti,syscon-mmuconfig = <&dsp2_system 0x1>;
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts
index 1fb6f13fb5e2..e958cb3d1b31 100644
--- a/arch/arm/boot/dts/dra76-evm.dts
+++ b/arch/arm/boot/dts/dra76-evm.dts
@@ -13,6 +13,13 @@
 	model = "TI DRA762 EVM";
 	compatible = "ti,dra76-evm", "ti,dra762", "ti,dra7";
 
+	aliases {
+		display0 = &hdmi0;
+
+		sound0 = &sound0;
+		sound1 = &hdmi;
+	};
+
 	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x80000000 0x0 0x80000000>;
@@ -116,6 +123,54 @@
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
+
+	clk_ov5640_fixed: clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+
+	hdmi0: connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&tpd12s015_out>;
+			};
+		};
+	};
+
+	tpd12s015: encoder {
+		compatible = "ti,tpd12s015";
+
+		gpios = <&gpio7 30 GPIO_ACTIVE_HIGH>,   /* gpio7_30, CT CP HPD */
+			<&gpio7 31 GPIO_ACTIVE_HIGH>,   /* gpio7_31, LS OE */
+			<&gpio7 12 GPIO_ACTIVE_HIGH>;   /* gpio7_12/sp1_cs2, HPD */
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tpd12s015_in: endpoint {
+					remote-endpoint = <&hdmi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tpd12s015_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
 };
 
 &i2c1 {
@@ -317,6 +372,27 @@
 	};
 };
 
+&i2c5 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	ov5640@3c {
+		compatible = "ovti,ov5640";
+		reg = <0x3c>;
+
+		clocks = <&clk_ov5640_fixed>;
+		clock-names = "xclk";
+
+		port {
+			csi2_cam0: endpoint {
+				remote-endpoint = <&csi2_phy0>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
 &cpu0 {
 	vdd-supply = <&buck10_reg>;
 };
@@ -411,6 +487,23 @@
 	phy-supply = <&ldo3_reg>;
 };
 
+&dss {
+	status = "ok";
+	vdda_video-supply = <&ldo5_reg>;
+};
+
+&hdmi {
+	status = "ok";
+
+	vdda-supply = <&ldo1_reg>;
+
+	port {
+		hdmi_out: endpoint {
+			remote-endpoint = <&tpd12s015_in>;
+		};
+	};
+};
+
 &qspi {
 	spi-max-frequency = <96000000>;
 	m25p80@0 {
@@ -447,3 +540,11 @@
 		max-bitrate = <5000000>;
 	};
 };
+
+&csi2_0 {
+	csi2_phy0: endpoint {
+		remote-endpoint = <&csi2_cam0>;
+		clock-lanes = <0>;
+		data-lanes = <1 2>;
+	};
+};
diff --git a/arch/arm/boot/dts/dra76x.dtsi b/arch/arm/boot/dts/dra76x.dtsi
index cdcba3f561c4..2f7539afef2b 100644
--- a/arch/arm/boot/dts/dra76x.dtsi
+++ b/arch/arm/boot/dts/dra76x.dtsi
@@ -41,6 +41,48 @@
 
 };
 
+&l4_per3 {
+	target-module@1b0000 {			/* 0x489b0000, ap 25 34.0 */
+		compatible = "ti,sysc-omap4", "ti,sysc";
+		reg = <0x1b0000 0x4>,
+		      <0x1b0010 0x4>;
+		reg-names = "rev", "sysc";
+		ti,sysc-midle = <SYSC_IDLE_FORCE>,
+				<SYSC_IDLE_NO>;
+		ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+				<SYSC_IDLE_NO>;
+		clocks = <&cam_clkctrl DRA7_CAM_VIP3_CLKCTRL 0>;
+		clock-names = "fck";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x1b0000 0x10000>;
+
+		cal: cal@0 {
+			compatible = "ti,dra76-cal";
+			reg = <0x0000 0x400>,
+			      <0x0800 0x40>,
+			      <0x0900 0x40>;
+			reg-names = "cal_top",
+				    "cal_rx_core0",
+				    "cal_rx_core1";
+			interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+			ti,camerrx-control = <&scm_conf 0x6dc>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				csi2_0: port@0 {
+					reg = <0>;
+				};
+				csi2_1: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+	};
+};
+
 /* MCAN interrupts are hard-wired to irqs 67, 68 */
 &crossbar_mpu {
 	ti,irqs-skip = <10 67 68 133 139 140>;
diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi
index 93e1eb83bed9..55cef4cac5f1 100644
--- a/arch/arm/boot/dts/dra7xx-clocks.dtsi
+++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi
@@ -1591,10 +1591,10 @@
 
 	rtc_cm: rtc-cm@700 {
 		compatible = "ti,omap4-cm";
-		reg = <0x700 0x100>;
+		reg = <0x700 0x60>;
 		#address-cells = <1>;
 		#size-cells = <1>;
-		ranges = <0 0x700 0x100>;
+		ranges = <0 0x700 0x60>;
 
 		rtc_clkctrl: rtc-clkctrl@20 {
 			compatible = "ti,clkctrl";
@@ -1603,6 +1603,20 @@
 		};
 	};
 
+	vpe_cm: vpe-cm@760 {
+		compatible = "ti,omap4-cm";
+		reg = <0x760 0xc>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x760 0xc>;
+
+		vpe_clkctrl: vpe-clkctrl@0 {
+			compatible = "ti,clkctrl";
+			reg = <0x0 0xc>;
+			#clock-cells = <2>;
+		};
+	};
+
 };
 
 &cm_core {
@@ -1720,6 +1734,20 @@
 		};
 	};
 
+	cam_cm: cam-cm@1000 {
+		compatible = "ti,omap4-cm";
+		reg = <0x1000 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x1000 0x100>;
+
+		cam_clkctrl: cam-clkctrl@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x2c>;
+			#clock-cells = <2>;
+		};
+	};
+
 	dss_cm: dss-cm@1100 {
 		compatible = "ti,omap4-cm";
 		reg = <0x1100 0x100>;
@@ -1734,6 +1762,20 @@
 		};
 	};
 
+	gpu_cm: gpu-cm@1200 {
+		compatible = "ti,omap4-cm";
+		reg = <0x1200 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x1200 0x100>;
+
+		gpu_clkctrl: gpu-clkctrl@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x4>;
+			#clock-cells = <2>;
+		};
+	};
+
 	l3init_cm: l3init-cm@1300 {
 		compatible = "ti,omap4-cm";
 		reg = <0x1300 0x100>;
diff --git a/arch/arm/boot/dts/e60k02.dtsi b/arch/arm/boot/dts/e60k02.dtsi
index 5a2c5320437d..ce50c4dc6f2a 100644
--- a/arch/arm/boot/dts/e60k02.dtsi
+++ b/arch/arm/boot/dts/e60k02.dtsi
@@ -48,7 +48,8 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
+		device_type = "memory";
 		reg = <0x80000000 0x20000000>;
 	};
 
diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
index b016b0b68306..044e5da64a76 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -145,12 +145,12 @@
 			#size-cells = <1>;
 			ranges = <0 0x02020000 0x40000>;
 
-			smp-sysram@0 {
+			smp-sram@0 {
 				compatible = "samsung,exynos4210-sysram";
 				reg = <0x0 0x1000>;
 			};
 
-			smp-sysram@3f000 {
+			smp-sram@3f000 {
 				compatible = "samsung,exynos4210-sysram-ns";
 				reg = <0x3f000 0x1000>;
 			};
diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts
index 09d3d54d09ff..a1bdf7830a87 100644
--- a/arch/arm/boot/dts/exynos4210-universal_c210.dts
+++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts
@@ -590,16 +590,16 @@
 };
 
 &sysram {
-	smp-sysram@0 {
+	smp-sram@0 {
 		status = "disabled";
 	};
 
-	smp-sysram@5000 {
+	smp-sram@5000 {
 		compatible = "samsung,exynos4210-sysram";
 		reg = <0x5000 0x1000>;
 	};
 
-	smp-sysram@1f000 {
+	smp-sram@1f000 {
 		status = "disabled";
 	};
 };
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index 554819ae1446..b4466232f0c1 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -79,12 +79,12 @@
 			#size-cells = <1>;
 			ranges = <0 0x02020000 0x20000>;
 
-			smp-sysram@0 {
+			smp-sram@0 {
 				compatible = "samsung,exynos4210-sysram";
 				reg = <0x0 0x1000>;
 			};
 
-			smp-sysram@1f000 {
+			smp-sram@1f000 {
 				compatible = "samsung,exynos4210-sysram-ns";
 				reg = <0x1f000 0x1000>;
 			};
diff --git a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
index ce87d2ff27aa..31719c079d67 100644
--- a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
+++ b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
@@ -168,3 +168,8 @@
 	vdda-supply = <&ldo17_reg>;
 	status = "okay";
 };
+
+&touchkey_reg {
+	gpio = <&gpm0 0 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi
index 83be3a797411..3023bc3b68ce 100644
--- a/arch/arm/boot/dts/exynos4412-midas.dtsi
+++ b/arch/arm/boot/dts/exynos4412-midas.dtsi
@@ -13,6 +13,7 @@
 #include "exynos4412.dtsi"
 #include "exynos4412-ppmu-common.dtsi"
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/clock/maxim,max77686.h>
 #include <dt-bindings/pinctrl/samsung.h>
@@ -92,6 +93,15 @@
 		enable-active-high;
 	};
 
+	touchkey_reg: voltage-regulator-6 {
+		compatible = "regulator-fixed";
+		regulator-name = "LED_VDD_3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		status = "disabled";
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
@@ -197,6 +207,25 @@
 		};
 	};
 
+	i2c-gpio-4 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpl0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpl0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		touchkey@20 {
+			compatible = "cypress,midas-touchkey";
+			reg = <0x20>;
+			vdd-supply = <&touchkey_reg>;
+			vcc-supply = <&ldo5_reg>;
+			interrupt-parent = <&gpj0>;
+			interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+			linux,keycodes = <KEY_BACK KEY_MENU>;
+		};
+	};
+
 	i2c-mhl {
 		compatible = "i2c-gpio";
 		gpios = <&gpf0 4 GPIO_ACTIVE_HIGH>, <&gpf0 6 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/exynos4412-n710x.dts b/arch/arm/boot/dts/exynos4412-n710x.dts
index fe2bfd76cc4e..98cd1284cd90 100644
--- a/arch/arm/boot/dts/exynos4412-n710x.dts
+++ b/arch/arm/boot/dts/exynos4412-n710x.dts
@@ -73,3 +73,8 @@
 	vdda-supply = <&cam_vdda_reg>;
 	status = "okay";
 };
+
+&touchkey_reg {
+	gpio = <&gpm0 5 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
index ea55f377d17c..9c39e82e4ecb 100644
--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -267,7 +267,7 @@
 
 		intn-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>;
 		connect-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpx3 5 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
 		initial-mode = <1>;
 	};
 
diff --git a/arch/arm/boot/dts/exynos4412-tiny4412.dts b/arch/arm/boot/dts/exynos4412-tiny4412.dts
index 01f37b5ac9c4..3a91de8a8082 100644
--- a/arch/arm/boot/dts/exynos4412-tiny4412.dts
+++ b/arch/arm/boot/dts/exynos4412-tiny4412.dts
@@ -66,6 +66,31 @@
 			clock-frequency = <24000000>;
 		};
 	};
+
+	panel {
+		compatible = "innolux,at070tn92";
+
+		port {
+			panel_input: endpoint {
+				remote-endpoint = <&lcdc_output>;
+			};
+		};
+	};
+};
+
+&fimd {
+	pinctrl-0 = <&lcd_clk>, <&lcd_data24>;
+	pinctrl-names = "default";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	port@3 {
+		reg = <3>;
+		lcdc_output: endpoint {
+			remote-endpoint = <&panel_input>;
+		};
+	};
 };
 
 &rtc {
diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
index 5022aa574b26..48868947373e 100644
--- a/arch/arm/boot/dts/exynos4412.dtsi
+++ b/arch/arm/boot/dts/exynos4412.dtsi
@@ -195,12 +195,12 @@
 			#size-cells = <1>;
 			ranges = <0 0x02020000 0x40000>;
 
-			smp-sysram@0 {
+			smp-sram@0 {
 				compatible = "samsung,exynos4210-sysram";
 				reg = <0x0 0x1000>;
 			};
 
-			smp-sysram@2f000 {
+			smp-sram@2f000 {
 				compatible = "samsung,exynos4210-sysram-ns";
 				reg = <0x2f000 0x1000>;
 			};
diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi
index 4801ca759feb..22eb951c614c 100644
--- a/arch/arm/boot/dts/exynos5.dtsi
+++ b/arch/arm/boot/dts/exynos5.dtsi
@@ -36,7 +36,7 @@
 		ranges;
 
 		chipid: chipid@10000000 {
-			compatible = "samsung,exynos4210-chipid", "syscon";
+			compatible = "samsung,exynos4210-chipid";
 			reg = <0x10000000 0x100>;
 		};
 
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index d6c85efdb465..f8ebc620f42d 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -15,7 +15,7 @@
 #include "exynos5250.dtsi"
 
 / {
-	model = "Insignal Arndale evaluation board based on EXYNOS5250";
+	model = "Insignal Arndale evaluation board based on Exynos5250";
 	compatible = "insignal,arndale", "samsung,exynos5250", "samsung,exynos5";
 
 	memory@40000000 {
@@ -154,7 +154,7 @@
 		compatible = "smsc,usb3503a";
 
 		reset-gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
-		connect-gpios = <&gpd1 7 GPIO_ACTIVE_LOW>;
+		connect-gpios = <&gpd1 7 GPIO_ACTIVE_HIGH>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 6dc96948a9cc..5c42df024adf 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * SAMSUNG SMDK5250 board device tree source
+ * Samsung SMDK5250 board device tree source
  *
  * Copyright (c) 2012 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
@@ -12,7 +12,7 @@
 #include "exynos5250.dtsi"
 
 / {
-	model = "SAMSUNG SMDK5250 board based on EXYNOS5250";
+	model = "Samsung SMDK5250 board based on Exynos5250";
 	compatible = "samsung,smdk5250", "samsung,exynos5250", "samsung,exynos5";
 
 	aliases {
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index e1f0215e3985..b6135af7ef39 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -1,16 +1,16 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * SAMSUNG EXYNOS5250 SoC device tree source
+ * Samsung Exynos5250 SoC device tree source
  *
  * Copyright (c) 2012 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
  *
- * SAMSUNG EXYNOS5250 SoC device nodes are listed in this file.
- * EXYNOS5250 based board files can include this file and provide
+ * Samsung Exynos5250 SoC device nodes are listed in this file.
+ * Exynos5250 based board files can include this file and provide
  * values for board specfic bindings.
  *
  * Note: This file does not include device nodes for all the controllers in
- * EXYNOS5250 SoC. As device tree coverage for EXYNOS5250 increases,
+ * Exynos5250 SoC. As device tree coverage for Exynos5250 increases,
  * additional nodes can be added to this file.
  */
 
@@ -171,12 +171,12 @@
 			#size-cells = <1>;
 			ranges = <0 0x02020000 0x30000>;
 
-			smp-sysram@0 {
+			smp-sram@0 {
 				compatible = "samsung,exynos4210-sysram";
 				reg = <0x0 0x1000>;
 			};
 
-			smp-sysram@2f000 {
+			smp-sram@2f000 {
 				compatible = "samsung,exynos4210-sysram-ns";
 				reg = <0x2f000 0x1000>;
 			};
diff --git a/arch/arm/boot/dts/exynos5260-xyref5260.dts b/arch/arm/boot/dts/exynos5260-xyref5260.dts
index 36a2b77eeb9d..0dc2ec16aa0a 100644
--- a/arch/arm/boot/dts/exynos5260-xyref5260.dts
+++ b/arch/arm/boot/dts/exynos5260-xyref5260.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * SAMSUNG XYREF5260 board device tree source
+ * Samsung XYREF5260 board device tree source
  *
  * Copyright (c) 2013 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
@@ -10,7 +10,7 @@
 #include "exynos5260.dtsi"
 
 / {
-	model = "SAMSUNG XYREF5260 board based on EXYNOS5260";
+	model = "Samsung XYREF5260 board based on Exynos5260";
 	compatible = "samsung,xyref5260", "samsung,exynos5260", "samsung,exynos5";
 
 	memory@20000000 {
diff --git a/arch/arm/boot/dts/exynos5260.dtsi b/arch/arm/boot/dts/exynos5260.dtsi
index b0811dbbb362..154df70128f3 100644
--- a/arch/arm/boot/dts/exynos5260.dtsi
+++ b/arch/arm/boot/dts/exynos5260.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * SAMSUNG EXYNOS5260 SoC device tree source
+ * Samsung Exynos5260 SoC device tree source
  *
  * Copyright (c) 2013 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts
index e0db251e253f..4f9297ae0763 100644
--- a/arch/arm/boot/dts/exynos5410-odroidxu.dts
+++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts
@@ -170,7 +170,7 @@
 
 		intn-gpios = <&gpx0 7 GPIO_ACTIVE_HIGH>;
 		connect-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpx1 4 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpx1 4 GPIO_ACTIVE_LOW>;
 		initial-mode = <1>;
 
 		clock-names = "refclk";
diff --git a/arch/arm/boot/dts/exynos5410-smdk5410.dts b/arch/arm/boot/dts/exynos5410-smdk5410.dts
index dffa5e3ed90c..5282b5deca86 100644
--- a/arch/arm/boot/dts/exynos5410-smdk5410.dts
+++ b/arch/arm/boot/dts/exynos5410-smdk5410.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * SAMSUNG SMDK5410 board device tree source
+ * Samsung SMDK5410 board device tree source
  *
  * Copyright (c) 2013 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
@@ -10,7 +10,7 @@
 #include "exynos5410.dtsi"
 #include <dt-bindings/interrupt-controller/irq.h>
 / {
-	model = "Samsung SMDK5410 board based on EXYNOS5410";
+	model = "Samsung SMDK5410 board based on Exynos5410";
 	compatible = "samsung,smdk5410", "samsung,exynos5410", "samsung,exynos5";
 
 	memory@40000000 {
diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
index a4b03d4c3de5..2eab80bf5f3a 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -1,12 +1,12 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * SAMSUNG EXYNOS5410 SoC device tree source
+ * Samsung Exynos5410 SoC device tree source
  *
  * Copyright (c) 2013 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
  *
- * SAMSUNG EXYNOS5410 SoC device nodes are listed in this file.
- * EXYNOS5410 based board files can include this file and provide
+ * Samsung Exynos5410 SoC device nodes are listed in this file.
+ * Exynos5410 based board files can include this file and provide
  * values for board specfic bindings.
  */
 
diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
index 592d7b45ecc8..ee28d30f5476 100644
--- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
+++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
@@ -15,7 +15,7 @@
 #include <dt-bindings/clock/samsung,s2mps11.h>
 
 / {
-	model = "Insignal Arndale Octa evaluation board based on EXYNOS5420";
+	model = "Insignal Arndale Octa evaluation board based on Exynos5420";
 	compatible = "insignal,arndale-octa", "samsung,exynos5420", "samsung,exynos5";
 
 	memory@20000000 {
diff --git a/arch/arm/boot/dts/exynos5420-cpus.dtsi b/arch/arm/boot/dts/exynos5420-cpus.dtsi
index 0ee6e92a3c29..58d1c54cf925 100644
--- a/arch/arm/boot/dts/exynos5420-cpus.dtsi
+++ b/arch/arm/boot/dts/exynos5420-cpus.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * SAMSUNG EXYNOS5420 SoC cpu device tree source
+ * Samsung Exynos5420 SoC cpu device tree source
  *
  * Copyright (c) 2015 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
index 8240e5186972..e3f2afe8359a 100644
--- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
+++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * SAMSUNG SMDK5420 board device tree source
+ * Samsung SMDK5420 board device tree source
  *
  * Copyright (c) 2013 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
@@ -12,7 +12,7 @@
 #include <dt-bindings/gpio/gpio.h>
 
 / {
-	model = "Samsung SMDK5420 board based on EXYNOS5420";
+	model = "Samsung SMDK5420 board based on Exynos5420";
 	compatible = "samsung,smdk5420", "samsung,exynos5420", "samsung,exynos5";
 
 	memory@20000000 {
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index d39907a41f78..b672080e7469 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -1,12 +1,12 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * SAMSUNG EXYNOS5420 SoC device tree source
+ * Samsung Exynos5420 SoC device tree source
  *
  * Copyright (c) 2013 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
  *
- * SAMSUNG EXYNOS5420 SoC device nodes are listed in this file.
- * EXYNOS5420 based board files can include this file and provide
+ * Samsung Exynos5420 SoC device nodes are listed in this file.
+ * Exynos5420 based board files can include this file and provide
  * values for board specfic bindings.
  */
 
@@ -48,62 +48,62 @@
 
 		opp-1800000000 {
 			opp-hz = /bits/ 64 <1800000000>;
-			opp-microvolt = <1250000>;
+			opp-microvolt = <1250000 1250000 1500000>;
 			clock-latency-ns = <140000>;
 		};
 		opp-1700000000 {
 			opp-hz = /bits/ 64 <1700000000>;
-			opp-microvolt = <1212500>;
+			opp-microvolt = <1212500 1212500 1500000>;
 			clock-latency-ns = <140000>;
 		};
 		opp-1600000000 {
 			opp-hz = /bits/ 64 <1600000000>;
-			opp-microvolt = <1175000>;
+			opp-microvolt = <1175000 1175000 1500000>;
 			clock-latency-ns = <140000>;
 		};
 		opp-1500000000 {
 			opp-hz = /bits/ 64 <1500000000>;
-			opp-microvolt = <1137500>;
+			opp-microvolt = <1137500 1137500 1500000>;
 			clock-latency-ns = <140000>;
 		};
 		opp-1400000000 {
 			opp-hz = /bits/ 64 <1400000000>;
-			opp-microvolt = <1112500>;
+			opp-microvolt = <1112500 1112500 1500000>;
 			clock-latency-ns = <140000>;
 		};
 		opp-1300000000 {
 			opp-hz = /bits/ 64 <1300000000>;
-			opp-microvolt = <1062500>;
+			opp-microvolt = <1062500 1062500 1500000>;
 			clock-latency-ns = <140000>;
 		};
 		opp-1200000000 {
 			opp-hz = /bits/ 64 <1200000000>;
-			opp-microvolt = <1037500>;
+			opp-microvolt = <1037500 1037500 1500000>;
 			clock-latency-ns = <140000>;
 		};
 		opp-1100000000 {
 			opp-hz = /bits/ 64 <1100000000>;
-			opp-microvolt = <1012500>;
+			opp-microvolt = <1012500 1012500 1500000>;
 			clock-latency-ns = <140000>;
 		};
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt = < 987500>;
+			opp-microvolt = < 987500 987500 1500000>;
 			clock-latency-ns = <140000>;
 		};
 		opp-900000000 {
 			opp-hz = /bits/ 64 <900000000>;
-			opp-microvolt = < 962500>;
+			opp-microvolt = < 962500 962500 1500000>;
 			clock-latency-ns = <140000>;
 		};
 		opp-800000000 {
 			opp-hz = /bits/ 64 <800000000>;
-			opp-microvolt = < 937500>;
+			opp-microvolt = < 937500 937500 1500000>;
 			clock-latency-ns = <140000>;
 		};
 		opp-700000000 {
 			opp-hz = /bits/ 64 <700000000>;
-			opp-microvolt = < 912500>;
+			opp-microvolt = < 912500 912500 1500000>;
 			clock-latency-ns = <140000>;
 		};
 	};
@@ -744,6 +744,56 @@
 			iommus = <&sysmmu_gscl1>;
 		};
 
+		gpu: gpu@11800000 {
+			compatible = "samsung,exynos5420-mali", "arm,mali-t628";
+			reg = <0x11800000 0x5000>;
+			interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "job", "mmu", "gpu";
+
+			clocks = <&clock CLK_G3D>;
+			clock-names = "core";
+			power-domains = <&g3d_pd>;
+			operating-points-v2 = <&gpu_opp_table>;
+
+			status = "disabled";
+			#cooling-cells = <2>;
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-177000000 {
+					opp-hz = /bits/ 64 <177000000>;
+					opp-microvolt = <812500>;
+				};
+				opp-266000000 {
+					opp-hz = /bits/ 64 <266000000>;
+					opp-microvolt = <862500>;
+				};
+				opp-350000000 {
+					opp-hz = /bits/ 64 <350000000>;
+					opp-microvolt = <912500>;
+				};
+				opp-420000000 {
+					opp-hz = /bits/ 64 <420000000>;
+					opp-microvolt = <962500>;
+				};
+				opp-480000000 {
+					opp-hz = /bits/ 64 <480000000>;
+					opp-microvolt = <1000000>;
+				};
+				opp-543000000 {
+					opp-hz = /bits/ 64 <543000000>;
+					opp-microvolt = <1037500>;
+				};
+				opp-600000000 {
+					opp-hz = /bits/ 64 <600000000>;
+					opp-microvolt = <1150000>;
+				};
+			};
+		};
+
 		scaler_0: scaler@12800000 {
 			compatible = "samsung,exynos5420-scaler";
 			reg = <0x12800000 0x1294>;
@@ -1042,7 +1092,6 @@
 			compatible = "samsung,exynos-bus";
 			clocks = <&clock CLK_DOUT_ACLK400_WCORE>;
 			clock-names = "bus";
-			operating-points-v2 = <&bus_wcore_opp_table>;
 			status = "disabled";
 		};
 
@@ -1050,7 +1099,6 @@
 			compatible = "samsung,exynos-bus";
 			clocks = <&clock CLK_DOUT_ACLK100_NOC>;
 			clock-names = "bus";
-			operating-points-v2 = <&bus_noc_opp_table>;
 			status = "disabled";
 		};
 
@@ -1058,7 +1106,6 @@
 			compatible = "samsung,exynos-bus";
 			clocks = <&clock CLK_DOUT_PCLK200_FSYS>;
 			clock-names = "bus";
-			operating-points-v2 = <&bus_fsys_apb_opp_table>;
 			status = "disabled";
 		};
 
@@ -1066,7 +1113,6 @@
 			compatible = "samsung,exynos-bus";
 			clocks = <&clock CLK_DOUT_ACLK200_FSYS>;
 			clock-names = "bus";
-			operating-points-v2 = <&bus_fsys_apb_opp_table>;
 			status = "disabled";
 		};
 
@@ -1074,7 +1120,6 @@
 			compatible = "samsung,exynos-bus";
 			clocks = <&clock CLK_DOUT_ACLK200_FSYS2>;
 			clock-names = "bus";
-			operating-points-v2 = <&bus_fsys2_opp_table>;
 			status = "disabled";
 		};
 
@@ -1082,7 +1127,6 @@
 			compatible = "samsung,exynos-bus";
 			clocks = <&clock CLK_DOUT_ACLK333>;
 			clock-names = "bus";
-			operating-points-v2 = <&bus_mfc_opp_table>;
 			status = "disabled";
 		};
 
@@ -1090,7 +1134,6 @@
 			compatible = "samsung,exynos-bus";
 			clocks = <&clock CLK_DOUT_ACLK266>;
 			clock-names = "bus";
-			operating-points-v2 = <&bus_gen_opp_table>;
 			status = "disabled";
 		};
 
@@ -1098,7 +1141,6 @@
 			compatible = "samsung,exynos-bus";
 			clocks = <&clock CLK_DOUT_ACLK66>;
 			clock-names = "bus";
-			operating-points-v2 = <&bus_peri_opp_table>;
 			status = "disabled";
 		};
 
@@ -1106,7 +1148,6 @@
 			compatible = "samsung,exynos-bus";
 			clocks = <&clock CLK_DOUT_ACLK333_G2D>;
 			clock-names = "bus";
-			operating-points-v2 = <&bus_g2d_opp_table>;
 			status = "disabled";
 		};
 
@@ -1114,7 +1155,6 @@
 			compatible = "samsung,exynos-bus";
 			clocks = <&clock CLK_DOUT_ACLK266_G2D>;
 			clock-names = "bus";
-			operating-points-v2 = <&bus_g2d_acp_opp_table>;
 			status = "disabled";
 		};
 
@@ -1122,7 +1162,6 @@
 			compatible = "samsung,exynos-bus";
 			clocks = <&clock CLK_DOUT_ACLK300_JPEG>;
 			clock-names = "bus";
-			operating-points-v2 = <&bus_jpeg_opp_table>;
 			status = "disabled";
 		};
 
@@ -1130,7 +1169,6 @@
 			compatible = "samsung,exynos-bus";
 			clocks = <&clock CLK_DOUT_ACLK166>;
 			clock-names = "bus";
-			operating-points-v2 = <&bus_jpeg_apb_opp_table>;
 			status = "disabled";
 		};
 
@@ -1138,7 +1176,6 @@
 			compatible = "samsung,exynos-bus";
 			clocks = <&clock CLK_DOUT_ACLK300_DISP1>;
 			clock-names = "bus";
-			operating-points-v2 = <&bus_disp1_fimd_opp_table>;
 			status = "disabled";
 		};
 
@@ -1146,7 +1183,6 @@
 			compatible = "samsung,exynos-bus";
 			clocks = <&clock CLK_DOUT_ACLK400_DISP1>;
 			clock-names = "bus";
-			operating-points-v2 = <&bus_disp1_opp_table>;
 			status = "disabled";
 		};
 
@@ -1154,7 +1190,6 @@
 			compatible = "samsung,exynos-bus";
 			clocks = <&clock CLK_DOUT_ACLK300_GSCL>;
 			clock-names = "bus";
-			operating-points-v2 = <&bus_gscl_opp_table>;
 			status = "disabled";
 		};
 
@@ -1162,252 +1197,8 @@
 			compatible = "samsung,exynos-bus";
 			clocks = <&clock CLK_DOUT_ACLK400_MSCL>;
 			clock-names = "bus";
-			operating-points-v2 = <&bus_mscl_opp_table>;
 			status = "disabled";
 		};
-
-		bus_wcore_opp_table: opp_table2 {
-			compatible = "operating-points-v2";
-
-			opp00 {
-				opp-hz = /bits/ 64 <84000000>;
-				opp-microvolt = <925000>;
-			};
-			opp01 {
-				opp-hz = /bits/ 64 <111000000>;
-				opp-microvolt = <950000>;
-			};
-			opp02 {
-				opp-hz = /bits/ 64 <222000000>;
-				opp-microvolt = <950000>;
-			};
-			opp03 {
-				opp-hz = /bits/ 64 <333000000>;
-				opp-microvolt = <950000>;
-			};
-			opp04 {
-				opp-hz = /bits/ 64 <400000000>;
-				opp-microvolt = <987500>;
-			};
-		};
-
-		bus_noc_opp_table: opp_table3 {
-			compatible = "operating-points-v2";
-
-			opp00 {
-				opp-hz = /bits/ 64 <67000000>;
-			};
-			opp01 {
-				opp-hz = /bits/ 64 <75000000>;
-			};
-			opp02 {
-				opp-hz = /bits/ 64 <86000000>;
-			};
-			opp03 {
-				opp-hz = /bits/ 64 <100000000>;
-			};
-		};
-
-		bus_fsys_apb_opp_table: opp_table4 {
-			compatible = "operating-points-v2";
-			opp-shared;
-
-			opp00 {
-				opp-hz = /bits/ 64 <100000000>;
-			};
-			opp01 {
-				opp-hz = /bits/ 64 <200000000>;
-			};
-		};
-
-		bus_fsys2_opp_table: opp_table5 {
-			compatible = "operating-points-v2";
-
-			opp00 {
-				opp-hz = /bits/ 64 <75000000>;
-			};
-			opp01 {
-				opp-hz = /bits/ 64 <100000000>;
-			};
-			opp02 {
-				opp-hz = /bits/ 64 <150000000>;
-			};
-		};
-
-		bus_mfc_opp_table: opp_table6 {
-			compatible = "operating-points-v2";
-
-			opp00 {
-				opp-hz = /bits/ 64 <96000000>;
-			};
-			opp01 {
-				opp-hz = /bits/ 64 <111000000>;
-			};
-			opp02 {
-				opp-hz = /bits/ 64 <167000000>;
-			};
-			opp03 {
-				opp-hz = /bits/ 64 <222000000>;
-			};
-			opp04 {
-				opp-hz = /bits/ 64 <333000000>;
-			};
-		};
-
-		bus_gen_opp_table: opp_table7 {
-			compatible = "operating-points-v2";
-
-			opp00 {
-				opp-hz = /bits/ 64 <89000000>;
-			};
-			opp01 {
-				opp-hz = /bits/ 64 <133000000>;
-			};
-			opp02 {
-				opp-hz = /bits/ 64 <178000000>;
-			};
-			opp03 {
-				opp-hz = /bits/ 64 <267000000>;
-			};
-		};
-
-		bus_peri_opp_table: opp_table8 {
-			compatible = "operating-points-v2";
-
-			opp00 {
-				opp-hz = /bits/ 64 <67000000>;
-			};
-		};
-
-		bus_g2d_opp_table: opp_table9 {
-			compatible = "operating-points-v2";
-
-			opp00 {
-				opp-hz = /bits/ 64 <84000000>;
-			};
-			opp01 {
-				opp-hz = /bits/ 64 <167000000>;
-			};
-			opp02 {
-				opp-hz = /bits/ 64 <222000000>;
-			};
-			opp03 {
-				opp-hz = /bits/ 64 <300000000>;
-			};
-			opp04 {
-				opp-hz = /bits/ 64 <333000000>;
-			};
-		};
-
-		bus_g2d_acp_opp_table: opp_table10 {
-			compatible = "operating-points-v2";
-
-			opp00 {
-				opp-hz = /bits/ 64 <67000000>;
-			};
-			opp01 {
-				opp-hz = /bits/ 64 <133000000>;
-			};
-			opp02 {
-				opp-hz = /bits/ 64 <178000000>;
-			};
-			opp03 {
-				opp-hz = /bits/ 64 <267000000>;
-			};
-		};
-
-		bus_jpeg_opp_table: opp_table11 {
-			compatible = "operating-points-v2";
-
-			opp00 {
-				opp-hz = /bits/ 64 <75000000>;
-			};
-			opp01 {
-				opp-hz = /bits/ 64 <150000000>;
-			};
-			opp02 {
-				opp-hz = /bits/ 64 <200000000>;
-			};
-			opp03 {
-				opp-hz = /bits/ 64 <300000000>;
-			};
-		};
-
-		bus_jpeg_apb_opp_table: opp_table12 {
-			compatible = "operating-points-v2";
-
-			opp00 {
-				opp-hz = /bits/ 64 <84000000>;
-			};
-			opp01 {
-				opp-hz = /bits/ 64 <111000000>;
-			};
-			opp02 {
-				opp-hz = /bits/ 64 <134000000>;
-			};
-			opp03 {
-				opp-hz = /bits/ 64 <167000000>;
-			};
-		};
-
-		bus_disp1_fimd_opp_table: opp_table13 {
-			compatible = "operating-points-v2";
-
-			opp00 {
-				opp-hz = /bits/ 64 <120000000>;
-			};
-			opp01 {
-				opp-hz = /bits/ 64 <200000000>;
-			};
-		};
-
-		bus_disp1_opp_table: opp_table14 {
-			compatible = "operating-points-v2";
-
-			opp00 {
-				opp-hz = /bits/ 64 <120000000>;
-			};
-			opp01 {
-				opp-hz = /bits/ 64 <200000000>;
-			};
-			opp02 {
-				opp-hz = /bits/ 64 <300000000>;
-			};
-		};
-
-		bus_gscl_opp_table: opp_table15 {
-			compatible = "operating-points-v2";
-
-			opp00 {
-				opp-hz = /bits/ 64 <150000000>;
-			};
-			opp01 {
-				opp-hz = /bits/ 64 <200000000>;
-			};
-			opp02 {
-				opp-hz = /bits/ 64 <300000000>;
-			};
-		};
-
-		bus_mscl_opp_table: opp_table16 {
-			compatible = "operating-points-v2";
-
-			opp00 {
-				opp-hz = /bits/ 64 <84000000>;
-			};
-			opp01 {
-				opp-hz = /bits/ 64 <167000000>;
-			};
-			opp02 {
-				opp-hz = /bits/ 64 <222000000>;
-			};
-			opp03 {
-				opp-hz = /bits/ 64 <333000000>;
-			};
-			opp04 {
-				opp-hz = /bits/ 64 <400000000>;
-			};
-		};
 	};
 
 	thermal-zones {
diff --git a/arch/arm/boot/dts/exynos5422-cpus.dtsi b/arch/arm/boot/dts/exynos5422-cpus.dtsi
index e4a5857c135f..1b8605cf2407 100644
--- a/arch/arm/boot/dts/exynos5422-cpus.dtsi
+++ b/arch/arm/boot/dts/exynos5422-cpus.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * SAMSUNG EXYNOS5422 SoC cpu device tree source
+ * Samsung Exynos5422 SoC cpu device tree source
  *
  * Copyright (c) 2015 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
index 059fa32d1a8f..5cf1aed20490 100644
--- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
@@ -35,7 +35,264 @@
 		};
 	};
 
-	dmc_opp_table: opp_table2 {
+	bus_wcore_opp_table: opp_table2 {
+		compatible = "operating-points-v2";
+
+		/* derived from 532MHz MPLL */
+		opp00 {
+			opp-hz = /bits/ 64 <88700000>;
+			opp-microvolt = <925000 925000 1400000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <133000000>;
+			opp-microvolt = <950000 950000 1400000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <177400000>;
+			opp-microvolt = <950000 950000 1400000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <266000000>;
+			opp-microvolt = <950000 950000 1400000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <532000000>;
+			opp-microvolt = <1000000 1000000 1400000>;
+		};
+	};
+
+	bus_noc_opp_table: opp_table3 {
+		compatible = "operating-points-v2";
+
+		/* derived from 666MHz CPLL */
+		opp00 {
+			opp-hz = /bits/ 64 <66600000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <74000000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <83250000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <111000000>;
+		};
+	};
+
+	bus_fsys_apb_opp_table: opp_table4 {
+		compatible = "operating-points-v2";
+
+		/* derived from 666MHz CPLL */
+		opp00 {
+			opp-hz = /bits/ 64 <111000000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <222000000>;
+		};
+	};
+
+	bus_fsys2_opp_table: opp_table5 {
+		compatible = "operating-points-v2";
+
+		/* derived from 600MHz DPLL */
+		opp00 {
+			opp-hz = /bits/ 64 <75000000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <120000000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <200000000>;
+		};
+	};
+
+	bus_mfc_opp_table: opp_table6 {
+		compatible = "operating-points-v2";
+
+		/* derived from 666MHz CPLL */
+		opp00 {
+			opp-hz = /bits/ 64 <83250000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <111000000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <166500000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <222000000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <333000000>;
+		};
+	};
+
+	bus_gen_opp_table: opp_table7 {
+		compatible = "operating-points-v2";
+
+		/* derived from 532MHz MPLL */
+		opp00 {
+			opp-hz = /bits/ 64 <88700000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <133000000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <178000000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <266000000>;
+		};
+	};
+
+	bus_peri_opp_table: opp_table8 {
+		compatible = "operating-points-v2";
+
+		/* derived from 666MHz CPLL */
+		opp00 {
+			opp-hz = /bits/ 64 <66600000>;
+		};
+	};
+
+	bus_g2d_opp_table: opp_table9 {
+		compatible = "operating-points-v2";
+
+		/* derived from 666MHz CPLL */
+		opp00 {
+			opp-hz = /bits/ 64 <83250000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <111000000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <166500000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <222000000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <333000000>;
+		};
+	};
+
+	bus_g2d_acp_opp_table: opp_table10 {
+		compatible = "operating-points-v2";
+
+		/* derived from 532MHz MPLL */
+		opp00 {
+			opp-hz = /bits/ 64 <66500000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <133000000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <178000000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <266000000>;
+		};
+	};
+
+	bus_jpeg_opp_table: opp_table11 {
+		compatible = "operating-points-v2";
+
+		/* derived from 600MHz DPLL */
+		opp00 {
+			opp-hz = /bits/ 64 <75000000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <150000000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <200000000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <300000000>;
+		};
+	};
+
+	bus_jpeg_apb_opp_table: opp_table12 {
+		compatible = "operating-points-v2";
+
+		/* derived from 666MHz CPLL */
+		opp00 {
+			opp-hz = /bits/ 64 <83250000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <111000000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <133000000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <166500000>;
+		};
+	};
+
+	bus_disp1_fimd_opp_table: opp_table13 {
+		compatible = "operating-points-v2";
+
+		/* derived from 600MHz DPLL */
+		opp00 {
+			opp-hz = /bits/ 64 <120000000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <200000000>;
+		};
+	};
+
+	bus_disp1_opp_table: opp_table14 {
+		compatible = "operating-points-v2";
+
+		/* derived from 600MHz DPLL */
+		opp00 {
+			opp-hz = /bits/ 64 <120000000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <200000000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <300000000>;
+		};
+	};
+
+	bus_gscl_opp_table: opp_table15 {
+		compatible = "operating-points-v2";
+
+		/* derived from 600MHz DPLL */
+		opp00 {
+			opp-hz = /bits/ 64 <150000000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <200000000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <300000000>;
+		};
+	};
+
+	bus_mscl_opp_table: opp_table16 {
+		compatible = "operating-points-v2";
+
+		/* derived from 666MHz CPLL */
+		opp00 {
+			opp-hz = /bits/ 64 <84000000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <167000000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <222000000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <333000000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <666000000>;
+		};
+	};
+
+	dmc_opp_table: opp_table17 {
 		compatible = "operating-points-v2";
 
 		opp00 {
@@ -134,6 +391,7 @@
 };
 
 &bus_wcore {
+	operating-points-v2 = <&bus_wcore_opp_table>;
 	devfreq-events = <&nocp_mem0_0>, <&nocp_mem0_1>,
 			<&nocp_mem1_0>, <&nocp_mem1_1>;
 	vdd-supply = <&buck3_reg>;
@@ -142,76 +400,91 @@
 };
 
 &bus_noc {
+	operating-points-v2 = <&bus_noc_opp_table>;
 	devfreq = <&bus_wcore>;
 	status = "okay";
 };
 
 &bus_fsys_apb {
+	operating-points-v2 = <&bus_fsys_apb_opp_table>;
 	devfreq = <&bus_wcore>;
 	status = "okay";
 };
 
 &bus_fsys {
+	operating-points-v2 = <&bus_fsys2_opp_table>;
 	devfreq = <&bus_wcore>;
 	status = "okay";
 };
 
 &bus_fsys2 {
+	operating-points-v2 = <&bus_fsys2_opp_table>;
 	devfreq = <&bus_wcore>;
 	status = "okay";
 };
 
 &bus_mfc {
+	operating-points-v2 = <&bus_mfc_opp_table>;
 	devfreq = <&bus_wcore>;
 	status = "okay";
 };
 
 &bus_gen {
+	operating-points-v2 = <&bus_gen_opp_table>;
 	devfreq = <&bus_wcore>;
 	status = "okay";
 };
 
 &bus_peri {
+	operating-points-v2 = <&bus_peri_opp_table>;
 	devfreq = <&bus_wcore>;
 	status = "okay";
 };
 
 &bus_g2d {
+	operating-points-v2 = <&bus_g2d_opp_table>;
 	devfreq = <&bus_wcore>;
 	status = "okay";
 };
 
 &bus_g2d_acp {
+	operating-points-v2 = <&bus_g2d_acp_opp_table>;
 	devfreq = <&bus_wcore>;
 	status = "okay";
 };
 
 &bus_jpeg {
+	operating-points-v2 = <&bus_jpeg_opp_table>;
 	devfreq = <&bus_wcore>;
 	status = "okay";
 };
 
 &bus_jpeg_apb {
+	operating-points-v2 = <&bus_jpeg_apb_opp_table>;
 	devfreq = <&bus_wcore>;
 	status = "okay";
 };
 
 &bus_disp1_fimd {
+	operating-points-v2 = <&bus_disp1_fimd_opp_table>;
 	devfreq = <&bus_wcore>;
 	status = "okay";
 };
 
 &bus_disp1 {
+	operating-points-v2 = <&bus_disp1_opp_table>;
 	devfreq = <&bus_wcore>;
 	status = "okay";
 };
 
 &bus_gscl_scaler {
+	operating-points-v2 = <&bus_gscl_opp_table>;
 	devfreq = <&bus_wcore>;
 	status = "okay";
 };
 
 &bus_mscl {
+	operating-points-v2 = <&bus_mscl_opp_table>;
 	devfreq = <&bus_wcore>;
 	status = "okay";
 };
@@ -601,6 +874,8 @@
 				regulator-max-microvolt = <1500000>;
 				regulator-always-on;
 				regulator-boot-on;
+				regulator-coupled-with = <&buck3_reg>;
+				regulator-coupled-max-spread = <300000>;
 
 				regulator-state-mem {
 					regulator-off-in-suspend;
@@ -613,6 +888,8 @@
 				regulator-max-microvolt = <1400000>;
 				regulator-always-on;
 				regulator-boot-on;
+				regulator-coupled-with = <&buck2_reg>;
+				regulator-coupled-max-spread = <300000>;
 
 				regulator-state-mem {
 					regulator-off-in-suspend;
@@ -623,7 +900,6 @@
 				regulator-name = "vdd_g3d";
 				regulator-min-microvolt = <800000>;
 				regulator-max-microvolt = <1400000>;
-				regulator-always-on;
 				regulator-boot-on;
 
 				regulator-state-mem {
@@ -771,6 +1047,11 @@
 	vtmu-supply = <&ldo7_reg>;
 };
 
+&gpu {
+	mali-supply = <&buck4_reg>;
+	status = "okay";
+};
+
 &rtc {
 	status = "okay";
 	clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>;
diff --git a/arch/arm/boot/dts/exynos5422-odroidhc1.dts b/arch/arm/boot/dts/exynos5422-odroidhc1.dts
index d271e7548826..f163206265bb 100644
--- a/arch/arm/boot/dts/exynos5422-odroidhc1.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidhc1.dts
@@ -72,14 +72,14 @@
 				 */
 				map1 {
 					trip = <&cpu0_alert1>;
-					cooling-device = <&cpu0 3 7>,
-							 <&cpu1 3 7>,
-							 <&cpu2 3 7>,
-							 <&cpu3 3 7>,
-							 <&cpu4 3 12>,
-							 <&cpu5 3 12>,
-							 <&cpu6 3 12>,
-							 <&cpu7 3 12>;
+					cooling-device = <&cpu0 3 8>,
+							 <&cpu1 3 8>,
+							 <&cpu2 3 8>,
+							 <&cpu3 3 8>,
+							 <&cpu4 3 14>,
+							 <&cpu5 3 14>,
+							 <&cpu6 3 14>,
+							 <&cpu7 3 14>;
 				};
 			};
 		};
@@ -116,14 +116,14 @@
 				};
 				map1 {
 					trip = <&cpu1_alert1>;
-					cooling-device = <&cpu0 3 7>,
-							 <&cpu1 3 7>,
-							 <&cpu2 3 7>,
-							 <&cpu3 3 7>,
-							 <&cpu4 3 12>,
-							 <&cpu5 3 12>,
-							 <&cpu6 3 12>,
-							 <&cpu7 3 12>;
+					cooling-device = <&cpu0 3 8>,
+							 <&cpu1 3 8>,
+							 <&cpu2 3 8>,
+							 <&cpu3 3 8>,
+							 <&cpu4 3 14>,
+							 <&cpu5 3 14>,
+							 <&cpu6 3 14>,
+							 <&cpu7 3 14>;
 				};
 			};
 		};
@@ -160,14 +160,14 @@
 				};
 				map1 {
 					trip = <&cpu2_alert1>;
-					cooling-device = <&cpu0 3 7>,
-							 <&cpu1 3 7>,
-							 <&cpu2 3 7>,
-							 <&cpu3 3 7>,
-							 <&cpu4 3 12>,
-							 <&cpu5 3 12>,
-							 <&cpu6 3 12>,
-							 <&cpu7 3 12>;
+					cooling-device = <&cpu0 3 8>,
+							 <&cpu1 3 8>,
+							 <&cpu2 3 8>,
+							 <&cpu3 3 8>,
+							 <&cpu4 3 14>,
+							 <&cpu5 3 14>,
+							 <&cpu6 3 14>,
+							 <&cpu7 3 14>;
 				};
 			};
 		};
@@ -204,14 +204,14 @@
 				};
 				map1 {
 					trip = <&cpu3_alert1>;
-					cooling-device = <&cpu0 3 7>,
-							 <&cpu1 3 7>,
-							 <&cpu2 3 7>,
-							 <&cpu3 3 7>,
-							 <&cpu4 3 12>,
-							 <&cpu5 3 12>,
-							 <&cpu6 3 12>,
-							 <&cpu7 3 12>;
+					cooling-device = <&cpu0 3 8>,
+							 <&cpu1 3 8>,
+							 <&cpu2 3 8>,
+							 <&cpu3 3 8>,
+							 <&cpu4 3 14>,
+							 <&cpu5 3 14>,
+							 <&cpu6 3 14>,
+							 <&cpu7 3 14>;
 				};
 			};
 		};
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
index 838872037493..1865a708b49f 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
@@ -107,7 +107,7 @@
 				/*
 				 * When reaching cpu0_alert3, reduce CPU
 				 * by 2 steps. On Exynos5422/5800 that would
-				 * be: 1600 MHz and 1100 MHz.
+				 * (usually) be: 1800 MHz and 1200 MHz.
 				 */
 				map3 {
 					trip = <&cpu0_alert3>;
@@ -122,19 +122,19 @@
 				};
 				/*
 				 * When reaching cpu0_alert4, reduce CPU
-				 * further, down to 600 MHz (12 steps for big,
-				 * 7 steps for LITTLE).
+				 * further, down to 600 MHz (14 steps for big,
+				 * 8 steps for LITTLE).
 				 */
-				map4 {
+				cpu0_cooling_map4: map4 {
 					trip = <&cpu0_alert4>;
-					cooling-device = <&cpu0 3 7>,
-							 <&cpu1 3 7>,
-							 <&cpu2 3 7>,
-							 <&cpu3 3 7>,
-							 <&cpu4 3 12>,
-							 <&cpu5 3 12>,
-							 <&cpu6 3 12>,
-							 <&cpu7 3 12>;
+					cooling-device = <&cpu0 3 8>,
+							 <&cpu1 3 8>,
+							 <&cpu2 3 8>,
+							 <&cpu3 3 8>,
+							 <&cpu4 3 14>,
+							 <&cpu5 3 14>,
+							 <&cpu6 3 14>,
+							 <&cpu7 3 14>;
 				};
 			};
 		};
@@ -198,16 +198,16 @@
 							 <&cpu6 0 2>,
 							 <&cpu7 0 2>;
 				};
-				map4 {
+				cpu1_cooling_map4: map4 {
 					trip = <&cpu1_alert4>;
-					cooling-device = <&cpu0 3 7>,
-							 <&cpu1 3 7>,
-							 <&cpu2 3 7>,
-							 <&cpu3 3 7>,
-							 <&cpu4 3 12>,
-							 <&cpu5 3 12>,
-							 <&cpu6 3 12>,
-							 <&cpu7 3 12>;
+					cooling-device = <&cpu0 3 8>,
+							 <&cpu1 3 8>,
+							 <&cpu2 3 8>,
+							 <&cpu3 3 8>,
+							 <&cpu4 3 14>,
+							 <&cpu5 3 14>,
+							 <&cpu6 3 14>,
+							 <&cpu7 3 14>;
 				};
 			};
 		};
@@ -271,16 +271,16 @@
 							 <&cpu6 0 2>,
 							 <&cpu7 0 2>;
 				};
-				map4 {
+				cpu2_cooling_map4: map4 {
 					trip = <&cpu2_alert4>;
-					cooling-device = <&cpu0 3 7>,
-							 <&cpu1 3 7>,
-							 <&cpu2 3 7>,
-							 <&cpu3 3 7>,
-							 <&cpu4 3 12>,
-							 <&cpu5 3 12>,
-							 <&cpu6 3 12>,
-							 <&cpu7 3 12>;
+					cooling-device = <&cpu0 3 8>,
+							 <&cpu1 3 8>,
+							 <&cpu2 3 8>,
+							 <&cpu3 3 8>,
+							 <&cpu4 3 14>,
+							 <&cpu5 3 14>,
+							 <&cpu6 3 14>,
+							 <&cpu7 3 14>;
 				};
 			};
 		};
@@ -344,16 +344,16 @@
 							 <&cpu6 0 2>,
 							 <&cpu7 0 2>;
 				};
-				map4 {
+				cpu3_cooling_map4: map4 {
 					trip = <&cpu3_alert4>;
-					cooling-device = <&cpu0 3 7>,
-							 <&cpu1 3 7>,
-							 <&cpu2 3 7>,
-							 <&cpu3 3 7>,
-							 <&cpu4 3 12>,
-							 <&cpu5 3 12>,
-							 <&cpu6 3 12>,
-							 <&cpu7 3 12>;
+					cooling-device = <&cpu0 3 8>,
+							 <&cpu1 3 8>,
+							 <&cpu2 3 8>,
+							 <&cpu3 3 8>,
+							 <&cpu4 3 14>,
+							 <&cpu5 3 14>,
+							 <&cpu6 3 14>,
+							 <&cpu7 3 14>;
 				};
 			};
 		};
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
index a31ca2ef750f..98feecad5489 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
@@ -30,6 +30,64 @@
 	samsung,asv-bin = <2>;
 };
 
+/*
+ * Odroid XU3-Lite board uses SoC revision with lower maximum frequencies
+ * than Odroid XU3/XU4 boards: 1.8 GHz for A15 cores & 1.3 GHz for A7 cores.
+ * Therefore we need to update OPPs tables and thermal maps accordingly.
+ */
+&cluster_a15_opp_table {
+	/delete-node/opp-2000000000;
+	/delete-node/opp-1900000000;
+};
+
+&cluster_a7_opp_table {
+	/delete-node/opp-1400000000;
+};
+
+&cpu0_cooling_map4 {
+	cooling-device = <&cpu0 3 7>,
+			 <&cpu1 3 7>,
+			 <&cpu2 3 7>,
+			 <&cpu3 3 7>,
+			 <&cpu4 3 12>,
+			 <&cpu5 3 12>,
+			 <&cpu6 3 12>,
+			 <&cpu7 3 12>;
+};
+
+&cpu1_cooling_map4 {
+	cooling-device = <&cpu0 3 7>,
+			 <&cpu1 3 7>,
+			 <&cpu2 3 7>,
+			 <&cpu3 3 7>,
+			 <&cpu4 3 12>,
+			 <&cpu5 3 12>,
+			 <&cpu6 3 12>,
+			 <&cpu7 3 12>;
+};
+
+&cpu2_cooling_map4 {
+	cooling-device = <&cpu0 3 7>,
+			 <&cpu1 3 7>,
+			 <&cpu2 3 7>,
+			 <&cpu3 3 7>,
+			 <&cpu4 3 12>,
+			 <&cpu5 3 12>,
+			 <&cpu6 3 12>,
+			 <&cpu7 3 12>;
+};
+
+&cpu3_cooling_map4 {
+	cooling-device = <&cpu0 3 7>,
+			 <&cpu1 3 7>,
+			 <&cpu2 3 7>,
+			 <&cpu3 3 7>,
+			 <&cpu4 3 12>,
+			 <&cpu5 3 12>,
+			 <&cpu6 3 12>,
+			 <&cpu7 3 12>;
+};
+
 &pwm {
 	/*
 	 * PWM 0 -- fan
diff --git a/arch/arm/boot/dts/exynos54xx.dtsi b/arch/arm/boot/dts/exynos54xx.dtsi
index f78dee801cd9..8aa5117e58ce 100644
--- a/arch/arm/boot/dts/exynos54xx.dtsi
+++ b/arch/arm/boot/dts/exynos54xx.dtsi
@@ -62,12 +62,12 @@
 			#size-cells = <1>;
 			ranges = <0 0x02020000 0x54000>;
 
-			smp-sysram@0 {
+			smp-sram@0 {
 				compatible = "samsung,exynos4210-sysram";
 				reg = <0x0 0x1000>;
 			};
 
-			smp-sysram@53000 {
+			smp-sram@53000 {
 				compatible = "samsung,exynos4210-sysram-ns";
 				reg = <0x53000 0x1000>;
 			};
diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
index 60ca3d685247..60ab0effe474 100644
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -156,6 +156,15 @@
 	assigned-clock-parents = <&clock CLK_MAU_EPLL>;
 };
 
+/*
+ * Peach Pi board uses SoC revision with lower maximum frequency for A7 cores
+ * (1.3 GHz instead of 1.4 GHz) than Odroid XU3/XU4 boards.  Thus we need to
+ * update A7 OPPs table accordingly.
+ */
+&cluster_a7_opp_table {
+	/delete-node/opp-1400000000;
+};
+
 &cpu0 {
 	cpu-supply = <&buck2_reg>;
 };
@@ -257,6 +266,8 @@
 				regulator-always-on;
 				regulator-boot-on;
 				regulator-ramp-delay = <12500>;
+				regulator-coupled-with = <&buck3_reg>;
+				regulator-coupled-max-spread = <300000>;
 				regulator-state-mem {
 					regulator-off-in-suspend;
 				};
@@ -269,6 +280,8 @@
 				regulator-always-on;
 				regulator-boot-on;
 				regulator-ramp-delay = <12500>;
+				regulator-coupled-with = <&buck2_reg>;
+				regulator-coupled-max-spread = <300000>;
 				regulator-state-mem {
 					regulator-off-in-suspend;
 				};
diff --git a/arch/arm/boot/dts/exynos5800.dtsi b/arch/arm/boot/dts/exynos5800.dtsi
index 16177d815ee4..dfb99ab53c3e 100644
--- a/arch/arm/boot/dts/exynos5800.dtsi
+++ b/arch/arm/boot/dts/exynos5800.dtsi
@@ -1,12 +1,12 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * SAMSUNG EXYNOS5800 SoC device tree source
+ * Samsung Exynos5800 SoC device tree source
  *
  * Copyright (c) 2014 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
  *
- * SAMSUNG EXYNOS5800 SoC device nodes are listed in this file.
- * EXYNOS5800 based board files can include this file and provide
+ * Samsung Exynos5800 SoC device nodes are listed in this file.
+ * Exynos5800 based board files can include this file and provide
  * values for board specfic bindings.
  */
 
@@ -21,67 +21,87 @@
 };
 
 &cluster_a15_opp_table {
+	opp-2000000000 {
+		opp-hz = /bits/ 64 <2000000000>;
+		opp-microvolt = <1312500>;
+		clock-latency-ns = <140000>;
+	};
+	opp-1900000000 {
+		opp-hz = /bits/ 64 <1900000000>;
+		opp-microvolt = <1262500>;
+		clock-latency-ns = <140000>;
+	};
+	opp-1800000000 {
+		opp-hz = /bits/ 64 <1800000000>;
+		opp-microvolt = <1237500>;
+		clock-latency-ns = <140000>;
+	};
 	opp-1700000000 {
-		opp-microvolt = <1250000>;
+		opp-microvolt = <1250000 1250000 1500000>;
 	};
 	opp-1600000000 {
-		opp-microvolt = <1250000>;
+		opp-microvolt = <1250000 1250000 1500000>;
 	};
 	opp-1500000000 {
-		opp-microvolt = <1100000>;
+		opp-microvolt = <1100000 1100000 1500000>;
 	};
 	opp-1400000000 {
-		opp-microvolt = <1100000>;
+		opp-microvolt = <1100000 1100000 1500000>;
 	};
 	opp-1300000000 {
-		opp-microvolt = <1100000>;
+		opp-microvolt = <1100000 1100000 1500000>;
 	};
 	opp-1200000000 {
-		opp-microvolt = <1000000>;
+		opp-microvolt = <1000000 1000000 1500000>;
 	};
 	opp-1100000000 {
-		opp-microvolt = <1000000>;
+		opp-microvolt = <1000000 1000000 1500000>;
 	};
 	opp-1000000000 {
-		opp-microvolt = <1000000>;
+		opp-microvolt = <1000000 1000000 1500000>;
 	};
 	opp-900000000 {
-		opp-microvolt = <1000000>;
+		opp-microvolt = <1000000 1000000 1500000>;
 	};
 	opp-800000000 {
-		opp-microvolt = <900000>;
+		opp-microvolt = <900000 900000 1500000>;
 	};
 	opp-700000000 {
-		opp-microvolt = <900000>;
+		opp-microvolt = <900000 900000 1500000>;
 	};
 	opp-600000000 {
 		opp-hz = /bits/ 64 <600000000>;
-		opp-microvolt = <900000>;
+		opp-microvolt = <900000 900000 1500000>;
 		clock-latency-ns = <140000>;
 	};
 	opp-500000000 {
 		opp-hz = /bits/ 64 <500000000>;
-		opp-microvolt = <900000>;
+		opp-microvolt = <900000 900000 1500000>;
 		clock-latency-ns = <140000>;
 	};
 	opp-400000000 {
 		opp-hz = /bits/ 64 <400000000>;
-		opp-microvolt = <900000>;
+		opp-microvolt = <900000 900000 1500000>;
 		clock-latency-ns = <140000>;
 	};
 	opp-300000000 {
 		opp-hz = /bits/ 64 <300000000>;
-		opp-microvolt = <900000>;
+		opp-microvolt = <900000 900000 1500000>;
 		clock-latency-ns = <140000>;
 	};
 	opp-200000000 {
 		opp-hz = /bits/ 64 <200000000>;
-		opp-microvolt = <900000>;
+		opp-microvolt = <900000 900000 1500000>;
 		clock-latency-ns = <140000>;
 	};
 };
 
 &cluster_a7_opp_table {
+	opp-1400000000 {
+		opp-hz = /bits/ 64 <1400000000>;
+		opp-microvolt = <1275000>;
+		clock-latency-ns = <140000>;
+	};
 	opp-1300000000 {
 		opp-microvolt = <1250000>;
 	};
diff --git a/arch/arm/boot/dts/ibm-power9-dual.dtsi b/arch/arm/boot/dts/ibm-power9-dual.dtsi
index 2abc42eda7b0..a0fa65b44b0f 100644
--- a/arch/arm/boot/dts/ibm-power9-dual.dtsi
+++ b/arch/arm/boot/dts/ibm-power9-dual.dtsi
@@ -86,7 +86,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			fsi_occ0: occ {
+			fsi_occ0: occ@1 {
 				compatible = "ibm,p9-occ";
 			};
 		};
@@ -187,7 +187,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			fsi_occ1: occ {
+			fsi_occ1: occ@2 {
 				compatible = "ibm,p9-occ";
 			};
 		};
diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts
index 0fde90df2b54..3f38c2e60a74 100644
--- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts
+++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts
@@ -165,8 +165,6 @@
 };
 
 &usbhost1 {
-	phy_type = "serial";
-	dr_mode = "host";
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx25-pdk.dts b/arch/arm/boot/dts/imx25-pdk.dts
index 05cccd12624c..fb66884d8a2f 100644
--- a/arch/arm/boot/dts/imx25-pdk.dts
+++ b/arch/arm/boot/dts/imx25-pdk.dts
@@ -304,8 +304,6 @@
 };
 
 &usbhost1 {
-	phy_type = "serial";
-	dr_mode = "host";
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi
index 9a097ef014af..40b95a290bd6 100644
--- a/arch/arm/boot/dts/imx25.dtsi
+++ b/arch/arm/boot/dts/imx25.dtsi
@@ -570,6 +570,9 @@
 				clock-names = "ipg", "ahb", "per";
 				fsl,usbmisc = <&usbmisc 1>;
 				fsl,usbphy = <&usbphy1>;
+				maximum-speed = "full-speed";
+				phy_type = "serial";
+				dr_mode = "host";
 				status = "disabled";
 			};
 
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
index ed6a3ce874b2..552196d8a60a 100644
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -58,29 +58,27 @@
 
 	display1: disp1 {
 		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
 		interface-pix-fmt = "rgb24";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_ipu_disp1>;
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: dvi {
-				clock-frequency = <65000000>;
-				hactive = <1024>;
-				vactive = <768>;
-				hback-porch = <220>;
-				hfront-porch = <40>;
-				vback-porch = <21>;
-				vfront-porch = <7>;
-				hsync-len = <60>;
-				vsync-len = <10>;
-			};
-		};
 
-		port {
+		port@0 {
+		reg = <0>;
+
 			display0_in: endpoint {
 				remote-endpoint = <&ipu_di0_disp1>;
 			};
 		};
+
+		port@1 {
+			reg = <1>;
+
+			parallel_display_out: endpoint {
+				remote-endpoint = <&tfp410_in>;
+			};
+		};
 	};
 
 	display2: disp2 {
@@ -115,6 +113,42 @@
 		};
 	};
 
+	dvi-connector {
+		compatible = "dvi-connector";
+		digital;
+
+		port {
+			dvi_connector_in: endpoint {
+				remote-endpoint = <&tfp410_out>;
+			};
+		};
+	};
+
+	dvi-encoder {
+		compatible = "ti,tfp410";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tfp410_in: endpoint {
+					remote-endpoint = <&parallel_display_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tfp410_out: endpoint {
+					remote-endpoint = <&dvi_connector_in>;
+				};
+			};
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/imx6dl-gw5907.dts b/arch/arm/boot/dts/imx6dl-gw5907.dts
new file mode 100644
index 000000000000..3fa2822beffc
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-gw5907.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw5907.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW5907";
+	compatible = "gw,imx6dl-gw5907", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-gw5910.dts b/arch/arm/boot/dts/imx6dl-gw5910.dts
new file mode 100644
index 000000000000..0d5e7e5da536
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-gw5910.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw5910.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW5910";
+	compatible = "gw,imx6dl-gw5910", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-gw5912.dts b/arch/arm/boot/dts/imx6dl-gw5912.dts
new file mode 100644
index 000000000000..5260e0142d63
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-gw5912.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw5912.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW5912";
+	compatible = "gw,imx6dl-gw5912", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-gw5913.dts b/arch/arm/boot/dts/imx6dl-gw5913.dts
new file mode 100644
index 000000000000..b74e533c8e67
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-gw5913.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw5913.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW5913";
+	compatible = "gw,imx6dl-gw5913", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6q-gw5907.dts b/arch/arm/boot/dts/imx6q-gw5907.dts
new file mode 100644
index 000000000000..b25526ef5886
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-gw5907.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-gw5907.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW5907";
+	compatible = "gw,imx6q-gw5907", "gw,ventana", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/imx6q-gw5910.dts b/arch/arm/boot/dts/imx6q-gw5910.dts
new file mode 100644
index 000000000000..6aafa2fcee08
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-gw5910.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-gw5910.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW5910";
+	compatible = "gw,imx6q-gw5910", "gw,ventana", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/imx6q-gw5912.dts b/arch/arm/boot/dts/imx6q-gw5912.dts
new file mode 100644
index 000000000000..4dcbd943cd93
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-gw5912.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw5912.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW5912";
+	compatible = "gw,imx6q-gw5912", "gw,ventana", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/imx6q-gw5913.dts b/arch/arm/boot/dts/imx6q-gw5913.dts
new file mode 100644
index 000000000000..6f511f1665fd
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-gw5913.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-gw5913.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW5913";
+	compatible = "gw,imx6q-gw5913", "gw,ventana", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/imx6q-logicpd.dts b/arch/arm/boot/dts/imx6q-logicpd.dts
index d96ae54be338..7a3d1d3e54a9 100644
--- a/arch/arm/boot/dts/imx6q-logicpd.dts
+++ b/arch/arm/boot/dts/imx6q-logicpd.dts
@@ -73,6 +73,16 @@
 	status = "okay";
 };
 
+&i2c1 {
+	touchscreen@26 {
+		compatible = "ilitek,ili2117";
+		reg = <0x26>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touchscreen>;
+		interrupts-extended = <&gpio1 6 IRQ_TYPE_EDGE_RISING>;
+	};
+};
+
 &ldb {
 	status = "okay";
 
diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
index ff1287e6b7ce..1b5bc6b5e806 100644
--- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
@@ -200,7 +200,7 @@
 
 &hdmi {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hdmi_ddc>;
+	pinctrl-0 = <&pinctrl_hdmi_ddc &pinctrl_hdmi_cec>;
 	status = "disabled";
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-gw5907.dtsi b/arch/arm/boot/dts/imx6qdl-gw5907.dtsi
new file mode 100644
index 000000000000..0bdebddffd51
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-gw5907.dtsi
@@ -0,0 +1,399 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		led0 = &led0;
+		led1 = &led1;
+		nand = &gpmi;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led0: user1 {
+			label = "user1";
+			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: user2 {
+			label = "user2";
+			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
+			default-state = "off";
+		};
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_5p0v: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "5P0V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	gpio@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	adc@48 {
+		compatible = "ti,ads1015";
+		reg = <0x48>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@4 {
+			reg = <4>;
+			ti,gain = <0>;
+			ti,datarate = <5>;
+		};
+
+		channel@5 {
+			reg = <5>;
+			ti,gain = <0>;
+			ti,datarate = <5>;
+		};
+
+		channel@6 {
+			reg = <6>;
+			ti,gain = <0>;
+			ti,datarate = <5>;
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>; /* MX6_DIO3 */
+	status = "disabled";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x1b0b0
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x1b0b0
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x0001b0b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
+			MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x1b0b0
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
new file mode 100644
index 000000000000..be1af7482f89
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
@@ -0,0 +1,491 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		led0 = &led0;
+		led1 = &led1;
+		led2 = &led2;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led0: user1 {
+			label = "user1";
+			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: user2 {
+			label = "user2";
+			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
+			default-state = "off";
+		};
+
+		led2: user3 {
+			label = "user3";
+			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
+			default-state = "off";
+		};
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_5p0v: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "5P0V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_wl: regulator-wl {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_wl>;
+		compatible = "regulator-fixed";
+		regulator-name = "wl";
+		gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <100>;
+		enable-active-high;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_bt: regulator-bt {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_bt>;
+		compatible = "regulator-fixed";
+		regulator-name = "bt";
+		gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <100>;
+		enable-active-high;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+
+&ecspi3 {
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	accel@19 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_accel>;
+		compatible = "st,lis2de12";
+		reg = <0x19>;
+		st,drdy-int-pin = <1>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <13 0>;
+		interrupt-names = "INT1";
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
+/* off-board RS232 */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* serial console */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+/* Sterling-LWB Bluetooth */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+/* GPS */
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_5p0v>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+/* Sterling-LWB SDIO WiFi */
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	vmmc-supply = <&reg_3p3v>;
+	non-removable;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl_accel: accelmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b1
+		>;
+	};
+
+	pinctrl_ecspi3: escpi3grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
+			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
+			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
+			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24	0x100b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x1b0b0
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06  0x1b0b0
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07  0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15  0x1b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x0001b0b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D20__GPIO3_IO20		0x1b0b0
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_reg_bt: regbtgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b1
+		>;
+	};
+
+	pinctrl_reg_wl: regwlgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x13059
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x17059 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x170b9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170b9 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170f9 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170f9
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-gw5912.dtsi b/arch/arm/boot/dts/imx6qdl-gw5912.dtsi
new file mode 100644
index 000000000000..8c57fd2f9a0b
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-gw5912.dtsi
@@ -0,0 +1,461 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		led0 = &led0;
+		led1 = &led1;
+		led2 = &led2;
+		nand = &gpmi;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led0: user1 {
+			label = "user1";
+			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: user2 {
+			label = "user2";
+			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
+			default-state = "off";
+		};
+
+		led2: user3 {
+			label = "user3";
+			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
+			default-state = "off";
+		};
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_vbus: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&ecspi2 {
+	cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	accel@19 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_accel>;
+		compatible = "st,lis2de12";
+		reg = <0x19>;
+		st,drdy-int-pin = <1>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <13 0>;
+		interrupt-names = "INT1";
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>; /* MX6_DIO0 */
+	status = "disabled";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>; /* MX6_DIO3 */
+	status = "disabled";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	rts-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_vbus>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	no-1-8-v; /* firmware will remove if board revision supports */
+	status = "okay";
+};
+
+&wdog1 {
+	status = "disabled";
+};
+
+&wdog2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_accel: accelmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi2: escpi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK	0x100b1
+			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI	0x100b1
+			MX6QDL_PAD_EIM_OE__ECSPI2_MISO	0x100b1
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26	0x100b1
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b1
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b1
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x4001b0b0
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x1b0b0
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x0001b0b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x1b0b0
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT2__PWM4_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x4001b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT3__GPIO2_IO11		0x4001b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x13059
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x17059 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170b9 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170f9 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170f9
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT3__WDOG2_B		0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-gw5913.dtsi b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
new file mode 100644
index 000000000000..635c203bd64d
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
@@ -0,0 +1,348 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		led0 = &led0;
+		led1 = &led1;
+		nand = &gpmi;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led0: user1 {
+			label = "user1";
+			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: user2 {
+			label = "user2";
+			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
+			default-state = "off";
+		};
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_5p0v: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "5P0V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>; /* MX6_DIO3 */
+	status = "disabled";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x1b0b0
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x1b0b0
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x0001b0b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-icore-1.5.dtsi b/arch/arm/boot/dts/imx6qdl-icore-1.5.dtsi
index d91d46b5898f..0fd7f2e24d9c 100644
--- a/arch/arm/boot/dts/imx6qdl-icore-1.5.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-icore-1.5.dtsi
@@ -25,10 +25,8 @@
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
 	clocks = <&clks IMX6QDL_CLK_ENET>,
 		 <&clks IMX6QDL_CLK_ENET>,
 		 <&clks IMX6QDL_CLK_ENET_REF>;
-	phy-mode = "rmii";
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi b/arch/arm/boot/dts/imx6qdl-icore.dtsi
index 7814f1ef0804..756f3a9f1b4f 100644
--- a/arch/arm/boot/dts/imx6qdl-icore.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-icore.dtsi
@@ -150,10 +150,23 @@
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
 	clocks = <&clks IMX6QDL_CLK_ENET>, <&clks IMX6QDL_CLK_ENET>, <&rmii_clk>;
 	phy-mode = "rmii";
+	phy-handle = <&eth_phy>;
 	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <4000>;
+			reset-deassert-us = <4000>;
+		};
+	};
 };
 
 &gpmi {
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi
index 6486df3e2942..978dc1c2ff1b 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi
@@ -5,6 +5,7 @@
  */
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/dlg,da9063-regulator.h>
 
 / {
 	aliases {
@@ -100,6 +101,10 @@
 			compatible = "dlg,da9062-rtc";
 		};
 
+		da9062_onkey: onkey {
+			compatible = "dlg,da9062-onkey";
+		};
+
 		watchdog {
 			compatible = "dlg,da9062-watchdog";
 		};
@@ -109,6 +114,7 @@
 				regulator-name = "vdd_arm";
 				regulator-min-microvolt = <730000>;
 				regulator-max-microvolt = <1380000>;
+				regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
 				regulator-always-on;
 			};
 
@@ -116,6 +122,7 @@
 				regulator-name = "vdd_soc";
 				regulator-min-microvolt = <730000>;
 				regulator-max-microvolt = <1380000>;
+				regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
 				regulator-always-on;
 			};
 
@@ -123,6 +130,7 @@
 				regulator-name = "vdd_ddr3";
 				regulator-min-microvolt = <1500000>;
 				regulator-max-microvolt = <1500000>;
+				regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
 				regulator-always-on;
 			};
 
@@ -130,6 +138,7 @@
 				regulator-name = "vdd_eth";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <1200000>;
+				regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
 				regulator-always-on;
 			};
 
diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
index a2a4f33a3e3e..0075637f9b0b 100644
--- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
@@ -60,18 +60,6 @@
 		regulator-always-on;
 	};
 
-	reg_5p0v_user_usb: regulator-5p0v-user-usb {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_reg_user_usb>;
-		vin-supply = <&reg_5p0v_main>;
-		regulator-name = "5V_USER_USB";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 22 GPIO_ACTIVE_LOW>;
-		startup-delay-us = <1000>;
-	};
-
 	reg_3p3v_pmic: regulator-3p3v-pmic {
 		compatible = "regulator-fixed";
 		vin-supply = <&reg_12p0v>;
@@ -331,6 +319,39 @@
 	};
 };
 
+&gpio3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio3_hog>;
+
+	usb-emulation {
+		gpio-hog;
+		gpios = <19 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "usb-emulation";
+	};
+
+	usb-mode1 {
+		gpio-hog;
+		gpios = <20 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "usb-mode1";
+	};
+
+	usb-pwr {
+		gpio-hog;
+		gpios = <22 GPIO_ACTIVE_LOW>;
+		output-high;
+		line-name = "usb-pwr-ctrl-en-n";
+	};
+
+	usb-mode2 {
+		gpio-hog;
+		gpios = <23 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "usb-mode2";
+	};
+};
+
 &i2c1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c1>;
@@ -592,6 +613,16 @@
 		status = "disabled";
 	};
 
+	reg_5p0v_user_usb: charger@32 {
+		compatible = "microchip,ucs1002";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ucs1002_pins>;
+		reg = <0x32>;
+		interrupts-extended = <&gpio5 2 IRQ_TYPE_EDGE_BOTH>,
+				      <&gpio3 21 IRQ_TYPE_EDGE_BOTH>;
+		interrupt-names = "a_det", "alert";
+	};
+
 	hpa1: amp@60 {
 		compatible = "ti,tpa6130a2";
 		pinctrl-names = "default";
@@ -629,7 +660,7 @@
 	pinctrl-0 = <&pinctrl_usdhc2>;
 	bus-width = <4>;
 	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+	disable-wp;
 	vmmc-supply = <&reg_3p3v_sd>;
 	vqmmc-supply = <&reg_3p3v>;
 	no-1-8-v;
@@ -642,7 +673,7 @@
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	bus-width = <4>;
 	cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+	disable-wp;
 	vmmc-supply = <&reg_3p3v_sd>;
 	vqmmc-supply = <&reg_3p3v>;
 	no-1-8-v;
@@ -776,6 +807,7 @@
 &usbh1 {
 	vbus-supply = <&reg_5p0v_main>;
 	disable-over-current;
+	maximum-speed = "full-speed";
 	status = "okay";
 };
 
@@ -936,6 +968,15 @@
 		>;
 	};
 
+	pinctrl_gpio3_hog: gpio3hoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x1b0b0
+			MX6QDL_PAD_EIM_D20__GPIO3_IO20		0x1b0b0
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0
+			MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x1b0b0
+		>;
+	};
+
 	pinctrl_i2c1: i2c1grp {
 		fsl,pins = <
 			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001b8b1
@@ -983,12 +1024,6 @@
 		>;
 	};
 
-	pinctrl_reg_user_usb: usbotggrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x40000038
-		>;
-	};
-
 	pinctrl_rmii_phy_irq: phygrp {
 		fsl,pins = <
 			MX6QDL_PAD_EIM_D30__GPIO3_IO30		0x40010000
@@ -1048,6 +1083,13 @@
 		>;
 	};
 
+	pinctrl_ucs1002_pins: ucs1002grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02  	0x1b0b0
+			MX6QDL_PAD_EIM_D21__GPIO3_IO21  	0x1b0b0
+		>;
+	};
+
 	pinctrl_usdhc2: usdhc2grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x10059
@@ -1056,7 +1098,6 @@
 			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
 			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
 			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-			MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x40010040
 			MX6QDL_PAD_NANDF_D2__GPIO2_IO02		0x40010040
 		>;
 	};
@@ -1069,7 +1110,6 @@
 			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
 			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
 			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-			MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x40010040
 			MX6QDL_PAD_NANDF_D0__GPIO2_IO00		0x40010040
 
 		>;
diff --git a/arch/arm/boot/dts/imx6sl-tolino-shine3.dts b/arch/arm/boot/dts/imx6sl-tolino-shine3.dts
new file mode 100644
index 000000000000..27143ea0f0f1
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sl-tolino-shine3.dts
@@ -0,0 +1,322 @@
+// SPDX-License-Identifier: (GPL-2.0)
+/*
+ * Device tree for the Tolino Shine 3 ebook reader
+ *
+ * Name on mainboard is: 37NB-E60K00+4A4
+ * Serials start with: E60K02 (a number also seen in
+ * vendor kernel sources)
+ *
+ * This mainboard seems to be equipped with different SoCs.
+ * In the Toline Shine 3 ebook reader it is a i.MX6SL
+ *
+ * Copyright 2019 Andreas Kemnade
+ * based on works
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6sl.dtsi"
+#include "e60k02.dtsi"
+
+/ {
+	model = "Tolino Shine 3";
+	compatible = "kobo,tolino-shine3", "fsl,imx6sl";
+};
+
+&gpio_keys {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio_keys>;
+};
+
+&i2c1 {
+	pinctrl-names = "default","sleep";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_sleep>;
+};
+
+&i2c2 {
+	pinctrl-names = "default","sleep";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_sleep>;
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_gpio_keys: gpio-keysgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_DAT1__GPIO5_IO08	0x17059	/* PWR_SW */
+			MX6SL_PAD_SD1_DAT4__GPIO5_IO12	0x17059	/* HALL_EN */
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6SL_PAD_LCD_DAT0__GPIO2_IO20	0x79
+			MX6SL_PAD_LCD_DAT1__GPIO2_IO21	0x79
+			MX6SL_PAD_LCD_DAT2__GPIO2_IO22	0x79
+			MX6SL_PAD_LCD_DAT3__GPIO2_IO23	0x79
+			MX6SL_PAD_LCD_DAT4__GPIO2_IO24	0x79
+			MX6SL_PAD_LCD_DAT5__GPIO2_IO25	0x79
+			MX6SL_PAD_LCD_DAT6__GPIO2_IO26	0x79
+			MX6SL_PAD_LCD_DAT7__GPIO2_IO27	0x79
+			MX6SL_PAD_LCD_DAT8__GPIO2_IO28	0x79
+			MX6SL_PAD_LCD_DAT9__GPIO2_IO29	0x79
+			MX6SL_PAD_LCD_DAT10__GPIO2_IO30	0x79
+			MX6SL_PAD_LCD_DAT11__GPIO2_IO31	0x79
+			MX6SL_PAD_LCD_DAT12__GPIO3_IO00	0x79
+			MX6SL_PAD_LCD_DAT13__GPIO3_IO01	0x79
+			MX6SL_PAD_LCD_DAT14__GPIO3_IO02	0x79
+			MX6SL_PAD_LCD_DAT15__GPIO3_IO03	0x79
+			MX6SL_PAD_LCD_DAT16__GPIO3_IO04	0x79
+			MX6SL_PAD_LCD_DAT17__GPIO3_IO05	0x79
+			MX6SL_PAD_LCD_DAT18__GPIO3_IO06	0x79
+			MX6SL_PAD_LCD_DAT19__GPIO3_IO07	0x79
+			MX6SL_PAD_LCD_DAT20__GPIO3_IO08	0x79
+			MX6SL_PAD_LCD_DAT21__GPIO3_IO09	0x79
+			MX6SL_PAD_LCD_DAT22__GPIO3_IO10	0x79
+			MX6SL_PAD_LCD_DAT23__GPIO3_IO11	0x79
+			MX6SL_PAD_LCD_CLK__GPIO2_IO15		0x79
+			MX6SL_PAD_LCD_ENABLE__GPIO2_IO16	0x79
+			MX6SL_PAD_LCD_HSYNC__GPIO2_IO17	0x79
+			MX6SL_PAD_LCD_VSYNC__GPIO2_IO18	0x79
+			MX6SL_PAD_LCD_RESET__GPIO2_IO19	0x79
+			MX6SL_PAD_KEY_COL3__GPIO3_IO30		0x79
+			MX6SL_PAD_KEY_ROW7__GPIO4_IO07		0x79
+			MX6SL_PAD_ECSPI2_MOSI__GPIO4_IO13	0x79
+			MX6SL_PAD_KEY_COL5__GPIO4_IO02		0x79
+			MX6SL_PAD_KEY_ROW6__GPIO4_IO05		0x79
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6SL_PAD_I2C1_SCL__I2C1_SCL	 0x4001f8b1
+			MX6SL_PAD_I2C1_SDA__I2C1_SDA	 0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c1_sleep: i2c1grp-sleep {
+		fsl,pins = <
+			MX6SL_PAD_I2C1_SCL__I2C1_SCL	 0x400108b1
+			MX6SL_PAD_I2C1_SDA__I2C1_SDA	 0x400108b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6SL_PAD_I2C2_SCL__I2C2_SCL	 0x4001f8b1
+			MX6SL_PAD_I2C2_SDA__I2C2_SDA	 0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c2_sleep: i2c2grp-sleep {
+		fsl,pins = <
+			MX6SL_PAD_I2C2_SCL__I2C2_SCL	 0x400108b1
+			MX6SL_PAD_I2C2_SDA__I2C2_SDA	 0x400108b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6SL_PAD_REF_CLK_24M__I2C3_SCL  0x4001f8b1
+			MX6SL_PAD_REF_CLK_32K__I2C3_SDA  0x4001f8b1
+		>;
+	};
+
+	pinctrl_led: ledgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_DAT6__GPIO5_IO07 0x17059
+		>;
+	};
+
+	pinctrl_lm3630a_bl_gpio: lm3630a-bl-gpiogrp {
+		fsl,pins = <
+			MX6SL_PAD_EPDC_PWRCTRL3__GPIO2_IO10		0x10059 /* HWEN */
+		>;
+	};
+
+	pinctrl_ricoh_gpio: ricoh_gpiogrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_CLK__GPIO5_IO15                  0x1b8b1 /* ricoh619 chg */
+			MX6SL_PAD_SD1_DAT0__GPIO5_IO11        0x1b8b1 /* ricoh619 irq */
+			MX6SL_PAD_KEY_COL2__GPIO3_IO28                         0x1b8b1 /* ricoh619 bat_low_int */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1
+			MX6SL_PAD_UART1_RXD__UART1_TX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID 0x17059
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6SL_PAD_SD2_CLK__SD2_CLK		0x13059
+			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2grp-100mhz {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__SD2_CMD		0x170b9
+			MX6SL_PAD_SD2_CLK__SD2_CLK		0x130b9
+			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
+			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
+			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
+			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2grp-200mhz {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__SD2_CMD		0x170f9
+			MX6SL_PAD_SD2_CLK__SD2_CLK		0x130f9
+			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x170f9
+			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x170f9
+			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x170f9
+			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x170f9
+		>;
+	};
+
+	pinctrl_usdhc2_sleep: usdhc2grp-sleep {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__GPIO5_IO04		0x100f9
+			MX6SL_PAD_SD2_CLK__GPIO5_IO05		0x100f9
+			MX6SL_PAD_SD2_DAT0__GPIO5_IO01		0x100f9
+			MX6SL_PAD_SD2_DAT1__GPIO4_IO30		0x100f9
+			MX6SL_PAD_SD2_DAT2__GPIO5_IO03		0x100f9
+			MX6SL_PAD_SD2_DAT3__GPIO4_IO28		0x100f9
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD	0x11059
+			MX6SL_PAD_SD3_CLK__SD3_CLK	0x11059
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x11059
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x11059
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x11059
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x11059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD	0x170b9
+			MX6SL_PAD_SD3_CLK__SD3_CLK	0x170b9
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x170b9
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x170b9
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x170b9
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD	0x170f9
+			MX6SL_PAD_SD3_CLK__SD3_CLK	0x170f9
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x170f9
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x170f9
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x170f9
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x170f9
+		>;
+	};
+
+	pinctrl_usdhc3_sleep: usdhc3grp-sleep {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__GPIO5_IO21	0x100c1
+			MX6SL_PAD_SD3_CLK__GPIO5_IO18	0x100c1
+			MX6SL_PAD_SD3_DAT0__GPIO5_IO19	0x100c1
+			MX6SL_PAD_SD3_DAT1__GPIO5_IO20	0x100c1
+			MX6SL_PAD_SD3_DAT2__GPIO5_IO16	0x100c1
+			MX6SL_PAD_SD3_DAT3__GPIO5_IO17	0x100c1
+		>;
+	};
+
+	pinctrl_wifi_power: wifi-powergrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_DAT6__GPIO4_IO29	0x10059	/* WIFI_3V3_ON */
+		>;
+	};
+
+	pinctrl_wifi_reset: wifi-resetgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_DAT7__GPIO5_IO00	0x10059	/* WIFI_RST */
+		>;
+	};
+};
+
+&leds {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_led>;
+};
+
+&lm3630a {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lm3630a_bl_gpio>;
+};
+
+&reg_wifi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wifi_power>;
+};
+
+&reg_vdd1p1 {
+	vin-supply = <&dcdc2_reg>;
+};
+
+&reg_vdd2p5 {
+	vin-supply = <&dcdc2_reg>;
+};
+
+&ricoh619 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ricoh_gpio>;
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc2_sleep>;
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc3_sleep>;
+};
+
+&wifi_pwrseq {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wifi_reset>;
+};
diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi
index 85aa8bb98528..a1bc5bb31756 100644
--- a/arch/arm/boot/dts/imx6sll.dtsi
+++ b/arch/arm/boot/dts/imx6sll.dtsi
@@ -632,6 +632,15 @@
 				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
 			};
 
+			pxp: pxp@20f0000 {
+				compatible = "fsl,imx6sll-pxp", "fsl,imx6ull-pxp";
+				reg = <0x20f0000 0x4000>;
+				interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_PXP>;
+				clock-names = "axi";
+			};
+
 			lcdif: lcd-controller@20f8000 {
 				compatible = "fsl,imx6sll-lcdif", "fsl,imx28-lcdif";
 				reg = <0x020f8000 0x4000>;
diff --git a/arch/arm/boot/dts/imx6sx-sdb-reva.dts b/arch/arm/boot/dts/imx6sx-sdb-reva.dts
index 91a7548fdb8d..dce5dcf96c25 100644
--- a/arch/arm/boot/dts/imx6sx-sdb-reva.dts
+++ b/arch/arm/boot/dts/imx6sx-sdb-reva.dts
@@ -6,6 +6,7 @@
 
 / {
 	model = "Freescale i.MX6 SoloX SDB RevA Board";
+	compatible = "fsl,imx6sx-sdb-reva", "fsl,imx6sx";
 };
 
 &i2c1 {
diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
index 212144511b66..265bf4108cb6 100644
--- a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
+++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
@@ -327,6 +327,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2>;
 	no-1-8-v;
+	broken-cd;
 	keep-power-in-suspend;
 	wakeup-source;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6ull-colibri.dtsi b/arch/arm/boot/dts/imx6ull-colibri.dtsi
index 6d850d997e1e..9145c536d71a 100644
--- a/arch/arm/boot/dts/imx6ull-colibri.dtsi
+++ b/arch/arm/boot/dts/imx6ull-colibri.dtsi
@@ -220,7 +220,7 @@
 &iomuxc {
 	pinctrl_can_int: canint-grp {
 		fsl,pins = <
-			MX6UL_PAD_ENET1_TX_DATA1__GPIO2_IO04	0X14 /* SODIMM 73 */
+			MX6UL_PAD_ENET1_TX_DATA1__GPIO2_IO04	0x13010	/* SODIMM 73 */
 		>;
 	};
 
@@ -256,15 +256,15 @@
 
 	pinctrl_ecspi1_cs: ecspi1-cs-grp {
 		fsl,pins = <
-			MX6UL_PAD_LCD_DATA21__GPIO3_IO26	0x000a0
+			MX6UL_PAD_LCD_DATA21__GPIO3_IO26	0x70a0	/* SODIMM 86 */
 		>;
 	};
 
 	pinctrl_ecspi1: ecspi1-grp {
 		fsl,pins = <
-			MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK	0x000a0
-			MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI	0x000a0
-			MX6UL_PAD_LCD_DATA23__ECSPI1_MISO	0x100a0
+			MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK	0x000a0	/* SODIMM 88 */
+			MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI	0x000a0 /* SODIMM 92 */
+			MX6UL_PAD_LCD_DATA23__ECSPI1_MISO	0x100a0 /* SODIMM 90 */
 		>;
 	};
 
@@ -284,68 +284,68 @@
 
 	pinctrl_gpio_bl_on: gpio-bl-on-grp {
 		fsl,pins = <
-			MX6UL_PAD_JTAG_TMS__GPIO1_IO11		0x000a0
+			MX6UL_PAD_JTAG_TMS__GPIO1_IO11		0x30a0	/* SODIMM 71 */
 		>;
 	};
 
 	pinctrl_gpio1: gpio1-grp {
 		fsl,pins = <
-			MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25	0X14 /* SODIMM 77 */
-			MX6UL_PAD_JTAG_TCK__GPIO1_IO14		0x14 /* SODIMM 99 */
-			MX6UL_PAD_NAND_CE1_B__GPIO4_IO14	0x14 /* SODIMM 133 */
-			MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24	0x14 /* SODIMM 135 */
-			MX6UL_PAD_UART3_CTS_B__GPIO1_IO26	0x14 /* SODIMM 100 */
-			MX6UL_PAD_JTAG_TRST_B__GPIO1_IO15	0x14 /* SODIMM 102 */
-			MX6UL_PAD_ENET1_RX_ER__GPIO2_IO07	0x14 /* SODIMM 104 */
-			MX6UL_PAD_UART3_RTS_B__GPIO1_IO27	0x14 /* SODIMM 186 */
+			MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25	0x10b0 /* SODIMM 77 */
+			MX6UL_PAD_JTAG_TCK__GPIO1_IO14		0x70a0 /* SODIMM 99 */
+			MX6UL_PAD_NAND_CE1_B__GPIO4_IO14	0x10b0 /* SODIMM 133 */
+			MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24	0x10b0 /* SODIMM 135 */
+			MX6UL_PAD_UART3_CTS_B__GPIO1_IO26	0x10b0 /* SODIMM 100 */
+			MX6UL_PAD_JTAG_TRST_B__GPIO1_IO15	0x70a0 /* SODIMM 102 */
+			MX6UL_PAD_ENET1_RX_ER__GPIO2_IO07	0x10b0 /* SODIMM 104 */
+			MX6UL_PAD_UART3_RTS_B__GPIO1_IO27	0x10b0 /* SODIMM 186 */
 		>;
 	};
 
 	pinctrl_gpio2: gpio2-grp { /* Camera */
 		fsl,pins = <
-			MX6UL_PAD_CSI_DATA04__GPIO4_IO25	0x74 /* SODIMM 69 */
-			MX6UL_PAD_CSI_MCLK__GPIO4_IO17		0x14 /* SODIMM 75 */
-			MX6UL_PAD_CSI_DATA06__GPIO4_IO27	0x14 /* SODIMM 85 */
-			MX6UL_PAD_CSI_PIXCLK__GPIO4_IO18	0x14 /* SODIMM 96 */
-			MX6UL_PAD_CSI_DATA05__GPIO4_IO26	0x14 /* SODIMM 98 */
+			MX6UL_PAD_CSI_DATA04__GPIO4_IO25	0x10b0 /* SODIMM 69 */
+			MX6UL_PAD_CSI_MCLK__GPIO4_IO17		0x10b0 /* SODIMM 75 */
+			MX6UL_PAD_CSI_DATA06__GPIO4_IO27	0x10b0 /* SODIMM 85 */
+			MX6UL_PAD_CSI_PIXCLK__GPIO4_IO18	0x10b0 /* SODIMM 96 */
+			MX6UL_PAD_CSI_DATA05__GPIO4_IO26	0x10b0 /* SODIMM 98 */
 		>;
 	};
 
 	pinctrl_gpio3: gpio3-grp { /* CAN2 */
 		fsl,pins = <
-			MX6UL_PAD_ENET1_RX_EN__GPIO2_IO02	0x14 /* SODIMM 178 */
-			MX6UL_PAD_ENET1_TX_DATA0__GPIO2_IO03	0x14 /* SODIMM 188 */
+			MX6UL_PAD_ENET1_RX_EN__GPIO2_IO02	0x10b0 /* SODIMM 178 */
+			MX6UL_PAD_ENET1_TX_DATA0__GPIO2_IO03	0x10b0 /* SODIMM 188 */
 		>;
 	};
 
 	pinctrl_gpio4: gpio4-grp {
 		fsl,pins = <
-			MX6UL_PAD_CSI_DATA07__GPIO4_IO28	0x74 /* SODIMM 65 */
+			MX6UL_PAD_CSI_DATA07__GPIO4_IO28	0x10b0 /* SODIMM 65 */
 		>;
 	};
 
 	pinctrl_gpio5: gpio5-grp { /* ATMEL MXT TOUCH */
 		fsl,pins = <
-			MX6UL_PAD_JTAG_MOD__GPIO1_IO10		0x74 /* SODIMM 106 */
+			MX6UL_PAD_JTAG_MOD__GPIO1_IO10		0xb0a0 /* SODIMM 106 */
 		>;
 	};
 
 	pinctrl_gpio6: gpio6-grp { /* Wifi pins */
 		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0x14 /* SODIMM 89 */
-			MX6UL_PAD_CSI_DATA02__GPIO4_IO23	0x14 /* SODIMM 79 */
-			MX6UL_PAD_CSI_VSYNC__GPIO4_IO19		0x14 /* SODIMM 81 */
-			MX6UL_PAD_CSI_DATA03__GPIO4_IO24	0x14 /* SODIMM 97 */
-			MX6UL_PAD_CSI_DATA00__GPIO4_IO21	0x14 /* SODIMM 101 */
-			MX6UL_PAD_CSI_DATA01__GPIO4_IO22	0x14 /* SODIMM 103 */
-			MX6UL_PAD_CSI_HSYNC__GPIO4_IO20		0x14 /* SODIMM 94 */
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0x10b0 /* SODIMM 89 */
+			MX6UL_PAD_CSI_DATA02__GPIO4_IO23	0x10b0 /* SODIMM 79 */
+			MX6UL_PAD_CSI_VSYNC__GPIO4_IO19		0x10b0 /* SODIMM 81 */
+			MX6UL_PAD_CSI_DATA03__GPIO4_IO24	0x10b0 /* SODIMM 97 */
+			MX6UL_PAD_CSI_DATA00__GPIO4_IO21	0x10b0 /* SODIMM 101 */
+			MX6UL_PAD_CSI_DATA01__GPIO4_IO22	0x10b0 /* SODIMM 103 */
+			MX6UL_PAD_CSI_HSYNC__GPIO4_IO20		0x10b0 /* SODIMM 94 */
 		>;
 	};
 
 	pinctrl_gpio7: gpio7-grp { /* CAN1 */
 		fsl,pins = <
-			MX6UL_PAD_ENET1_RX_DATA0__GPIO2_IO00	0x74 /* SODIMM 55 */
-			MX6UL_PAD_ENET1_RX_DATA1__GPIO2_IO01	0x74 /* SODIMM 63 */
+			MX6UL_PAD_ENET1_RX_DATA0__GPIO2_IO00	0xb0b0/* SODIMM 55 */
+			MX6UL_PAD_ENET1_RX_DATA1__GPIO2_IO01	0xb0b0 /* SODIMM 63 */
 		>;
 	};
 
@@ -370,15 +370,15 @@
 
 	pinctrl_i2c1: i2c1-grp {
 		fsl,pins = <
-			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
-			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
+			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0	/* SODIMM 196 */
+			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0	/* SODIMM 194 */
 		>;
 	};
 
 	pinctrl_i2c1_gpio: i2c1-gpio-grp {
 		fsl,pins = <
-			MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x4001b8b0
-			MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x4001b8b0
+			MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x4001b8b0	/* SODIMM 196 */
+			MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x4001b8b0	/* SODIMM 194 */
 		>;
 	};
 
@@ -398,107 +398,107 @@
 
 	pinctrl_lcdif_dat: lcdif-dat-grp {
 		fsl,pins = <
-			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00  0x00079
-			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01  0x00079
-			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02  0x00079
-			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03  0x00079
-			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04  0x00079
-			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05  0x00079
-			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06  0x00079
-			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07  0x00079
-			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08  0x00079
-			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09  0x00079
-			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10  0x00079
-			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11  0x00079
-			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12  0x00079
-			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13  0x00079
-			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14  0x00079
-			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15  0x00079
-			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16  0x00079
-			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17  0x00079
+			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x00079	/* SODIMM 76 */
+			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x00079	/* SODIMM 70 */
+			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x00079	/* SODIMM 60 */
+			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x00079	/* SODIMM 58 */
+			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x00079	/* SODIMM 78 */
+			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x00079	/* SODIMM 72 */
+			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x00079	/* SODIMM 80 */
+			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x00079	/* SODIMM 46 */
+			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x00079	/* SODIMM 62 */
+			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x00079	/* SODIMM 48 */
+			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x00079	/* SODIMM 74 */
+			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x00079	/* SODIMM 50 */
+			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x00079	/* SODIMM 52 */
+			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x00079	/* SODIMM 54 */
+			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x00079	/* SODIMM 66 */
+			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x00079	/* SODIMM 64 */
+			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x00079	/* SODIMM 57 */
+			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x00079	/* SODIMM 61 */
 		>;
 	};
 
 	pinctrl_lcdif_ctrl: lcdif-ctrl-grp {
 		fsl,pins = <
-			MX6UL_PAD_LCD_CLK__LCDIF_CLK	    0x00079
-			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE  0x00079
-			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC    0x00079
-			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC    0x00079
+			MX6UL_PAD_LCD_CLK__LCDIF_CLK	    0x00079	/* SODIMM 56 */
+			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE  0x00079	/* SODIMM 44 */
+			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC    0x00079	/* SODIMM 68 */
+			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC    0x00079	/* SODIMM 82 */
 		>;
 	};
 
 	pinctrl_pwm4: pwm4-grp {
 		fsl,pins = <
-			MX6UL_PAD_NAND_WP_B__PWM4_OUT	0x00079
+			MX6UL_PAD_NAND_WP_B__PWM4_OUT	0x00079		/* SODIMM 59 */
 		>;
 	};
 
 	pinctrl_pwm5: pwm5-grp {
 		fsl,pins = <
-			MX6UL_PAD_NAND_DQS__PWM5_OUT	0x00079
+			MX6UL_PAD_NAND_DQS__PWM5_OUT	0x00079		/* SODIMM 28 */
 		>;
 	};
 
 	pinctrl_pwm6: pwm6-grp {
 		fsl,pins = <
-			MX6UL_PAD_ENET1_TX_EN__PWM6_OUT	0x00079
+			MX6UL_PAD_ENET1_TX_EN__PWM6_OUT	0x00079		/* SODIMM 30 */
 		>;
 	};
 
 	pinctrl_pwm7: pwm7-grp {
 		fsl,pins = <
-			MX6UL_PAD_ENET1_TX_CLK__PWM7_OUT	0x00079
+			MX6UL_PAD_ENET1_TX_CLK__PWM7_OUT	0x00079	/* SODIMM 67 */
 		>;
 	};
 
 	pinctrl_uart1: uart1-grp {
 		fsl,pins = <
-			MX6UL_PAD_UART1_TX_DATA__UART1_DTE_RX	0x1b0b1
-			MX6UL_PAD_UART1_RX_DATA__UART1_DTE_TX	0x1b0b1
-			MX6UL_PAD_UART1_RTS_B__UART1_DTE_CTS	0x1b0b1
-			MX6UL_PAD_UART1_CTS_B__UART1_DTE_RTS	0x1b0b1
+			MX6UL_PAD_UART1_TX_DATA__UART1_DTE_RX	0x1b0b1	/* SODIMM 33 */
+			MX6UL_PAD_UART1_RX_DATA__UART1_DTE_TX	0x1b0b1	/* SODIMM 35 */
+			MX6UL_PAD_UART1_RTS_B__UART1_DTE_CTS	0x1b0b1	/* SODIMM 27 */
+			MX6UL_PAD_UART1_CTS_B__UART1_DTE_RTS	0x1b0b1	/* SODIMM 25 */
 		>;
 	};
 
 	pinctrl_uart1_ctrl1: uart1-ctrl1-grp { /* Additional DTR, DCD */
 		fsl,pins = <
-			MX6UL_PAD_JTAG_TDI__GPIO1_IO13		0x1b0b1 /* DCD */
-			MX6UL_PAD_LCD_DATA18__GPIO3_IO23	0x1b0b1 /* DSR */
-			MX6UL_PAD_JTAG_TDO__GPIO1_IO12		0x1b0b1 /* DTR */
-			MX6UL_PAD_LCD_DATA19__GPIO3_IO24        0x1b0b1 /* RI */
+			MX6UL_PAD_JTAG_TDI__GPIO1_IO13		0x70a0 /* SODIMM 31 */
+			MX6UL_PAD_LCD_DATA18__GPIO3_IO23	0x10b0 /* SODIMM 29 */
+			MX6UL_PAD_JTAG_TDO__GPIO1_IO12		0x90b1 /* SODIMM 23 */
+			MX6UL_PAD_LCD_DATA19__GPIO3_IO24        0x10b0 /* SODIMM 37 */
 		>;
 	};
 
 	pinctrl_uart2: uart2-grp {
 		fsl,pins = <
-			MX6UL_PAD_UART2_TX_DATA__UART2_DTE_RX	0x1b0b1
-			MX6UL_PAD_UART2_RX_DATA__UART2_DTE_TX	0x1b0b1
-			MX6UL_PAD_UART2_CTS_B__UART2_DTE_RTS	0x1b0b1
-			MX6UL_PAD_UART2_RTS_B__UART2_DTE_CTS	0x1b0b1
+			MX6UL_PAD_UART2_TX_DATA__UART2_DTE_RX	0x1b0b1 /* SODIMM 36 */
+			MX6UL_PAD_UART2_RX_DATA__UART2_DTE_TX	0x1b0b1 /* SODIMM 38 */
+			MX6UL_PAD_UART2_CTS_B__UART2_DTE_RTS	0x1b0b1 /* SODIMM 32 */
+			MX6UL_PAD_UART2_RTS_B__UART2_DTE_CTS	0x1b0b1 /* SODIMM 34 */
 		>;
 	};
 	pinctrl_uart5: uart5-grp {
 		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO04__UART5_DTE_RX	0x1b0b1
-			MX6UL_PAD_GPIO1_IO05__UART5_DTE_TX	0x1b0b1
+			MX6UL_PAD_GPIO1_IO04__UART5_DTE_RX	0x1b0b1 /* SODIMM 19 */
+			MX6UL_PAD_GPIO1_IO05__UART5_DTE_TX	0x1b0b1 /* SODIMM 21 */
 		>;
 	};
 
 	pinctrl_usbh_reg: gpio-usbh-reg {
 		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0x1b0b1 /* SODIMM 129 USBH PEN */
+			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0x10b0 /* SODIMM 129 */
 		>;
 	};
 
 	pinctrl_usdhc1: usdhc1-grp {
 		fsl,pins = <
-			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x17059
-			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x10059
-			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
-			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
-			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
-			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x17059 /* SODIMM 47 */
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x10059 /* SODIMM 190 */
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059 /* SODIMM 192 */
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059 /* SODIMM 49 */
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059 /* SODIMM 51 */
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059 /* SODIMM 53 */
 		>;
 	};
 
@@ -533,7 +533,7 @@
 			MX6UL_PAD_CSI_HSYNC__USDHC2_CMD		0x17059
 			MX6UL_PAD_CSI_VSYNC__USDHC2_CLK		0x17059
 
-			MX6UL_PAD_GPIO1_IO03__OSC32K_32K_OUT	0x14
+			MX6UL_PAD_GPIO1_IO03__OSC32K_32K_OUT	0x10
 		>;
 	};
 
@@ -547,23 +547,23 @@
 &iomuxc_snvs {
 	pinctrl_snvs_gpio1: snvs-gpio1-grp {
 		fsl,pins = <
-			MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x14 /* SODIMM 93 */
-			MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x14 /* SODIMM 95 */
-			MX6ULL_PAD_BOOT_MODE0__GPIO5_IO10	0x74 /* SODIMM 105 */
-			MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05	0x14 /* SODIMM 131 USBH OC */
-			MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08	0x74 /* SODIMM 138 */
+			MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x110a0	/* SODIMM 93 */
+			MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x110a0	/* SODIMM 95 */
+			MX6ULL_PAD_BOOT_MODE0__GPIO5_IO10	0x1b0a0	/* SODIMM 105 */
+			MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05	0x0b0a0	/* SODIMM 131 */
+			MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08	0x110a0	/* SODIMM 138 */
 		>;
 	};
 
 	pinctrl_snvs_gpio2: snvs-gpio2-grp { /* ATMEL MXT TOUCH */
 		fsl,pins = <
-			MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x74 /* SODIMM 107 */
+			MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04	0xb0a0	/* SODIMM 107 */
 		>;
 	};
 
 	pinctrl_snvs_gpio3: snvs-gpio3-grp { /* Wifi pins */
 		fsl,pins = <
-			MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11	0x14 /* SODIMM 127 */
+			MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11	0x130a0	/* SODIMM 127 */
 		>;
 	};
 
@@ -587,13 +587,13 @@
 
 	pinctrl_snvs_gpiokeys: snvs-gpiokeys-grp {
 		fsl,pins = <
-			MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x130b0
+			MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x130a0	/* SODIMM 45 */
 		>;
 	};
 
 	pinctrl_snvs_usdhc1_cd: snvs-usdhc1-cd-grp {
 		fsl,pins = <
-			MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x1b0b0 /* CD */
+			MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x1b0a0 /* SODIMM 43 */
 		>;
 	};
 
@@ -605,7 +605,7 @@
 
 	pinctrl_snvs_wifi_pdn: snvs-wifi-pdn-grp {
 		fsl,pins = <
-			MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11	0x14
+			MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11	0x130a0
 		>;
 	};
 };
diff --git a/arch/arm/boot/dts/imx7d-pico.dtsi b/arch/arm/boot/dts/imx7d-pico.dtsi
index 6f50ebf31a0a..e57da0d32b98 100644
--- a/arch/arm/boot/dts/imx7d-pico.dtsi
+++ b/arch/arm/boot/dts/imx7d-pico.dtsi
@@ -7,12 +7,42 @@
 #include "imx7d.dtsi"
 
 / {
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 50000 0>;
+		brightness-levels = <0 36 72 108 144 180 216 255>;
+		default-brightness-level = <6>;
+	};
+
 	/* Will be filled by the bootloader */
 	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0>;
 	};
 
+	panel {
+		compatible = "vxt,vl050-8048nt-c01";
+		backlight = <&backlight>;
+		power-supply = <&reg_lcd_3v3>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+
+	reg_lcd_3v3: regulator-lcd-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_lcdreg_on>;
+		regulator-name = "lcd-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+        };
+
 	reg_wlreg_on: regulator-wlreg_on {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
@@ -230,6 +260,18 @@
 	};
 };
 
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif>;
+	status = "okay";
+
+	port {
+		display_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
 &sai1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_sai1>;
@@ -260,6 +302,8 @@
 };
 
 &pwm4 { /* Backlight */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
 	status = "okay";
 };
 
@@ -413,6 +457,40 @@
 		>;
 	};
 
+	pinctrl_lcdif: lcdifgrp {
+		fsl,pins = <
+			MX7D_PAD_LCD_DATA00__LCD_DATA0		0x79
+			MX7D_PAD_LCD_DATA01__LCD_DATA1		0x79
+			MX7D_PAD_LCD_DATA02__LCD_DATA2		0x79
+			MX7D_PAD_LCD_DATA03__LCD_DATA3		0x79
+			MX7D_PAD_LCD_DATA04__LCD_DATA4		0x79
+			MX7D_PAD_LCD_DATA05__LCD_DATA5		0x79
+			MX7D_PAD_LCD_DATA06__LCD_DATA6		0x79
+			MX7D_PAD_LCD_DATA07__LCD_DATA7		0x79
+			MX7D_PAD_LCD_DATA08__LCD_DATA8		0x79
+			MX7D_PAD_LCD_DATA09__LCD_DATA9		0x79
+			MX7D_PAD_LCD_DATA10__LCD_DATA10		0x79
+			MX7D_PAD_LCD_DATA11__LCD_DATA11		0x79
+			MX7D_PAD_LCD_DATA12__LCD_DATA12		0x79
+			MX7D_PAD_LCD_DATA13__LCD_DATA13		0x79
+			MX7D_PAD_LCD_DATA14__LCD_DATA14		0x79
+			MX7D_PAD_LCD_DATA15__LCD_DATA15		0x79
+			MX7D_PAD_LCD_DATA16__LCD_DATA16		0x79
+			MX7D_PAD_LCD_DATA17__LCD_DATA17		0x79
+			MX7D_PAD_LCD_DATA18__LCD_DATA18		0x79
+			MX7D_PAD_LCD_DATA19__LCD_DATA19		0x79
+			MX7D_PAD_LCD_DATA20__LCD_DATA20		0x79
+			MX7D_PAD_LCD_DATA21__LCD_DATA21		0x79
+			MX7D_PAD_LCD_DATA22__LCD_DATA22		0x79
+			MX7D_PAD_LCD_DATA23__LCD_DATA23		0x79
+			MX7D_PAD_LCD_CLK__LCD_CLK		0x79
+			MX7D_PAD_LCD_ENABLE__LCD_ENABLE		0x78
+			MX7D_PAD_LCD_VSYNC__LCD_VSYNC		0x78
+			MX7D_PAD_LCD_HSYNC__LCD_HSYNC		0x78
+			MX7D_PAD_LCD_RESET__GPIO3_IO4		0x14
+		>;
+	};
+
 	pinctrl_pwm1: pwm1 {
 		fsl,pins = <
 			MX7D_PAD_GPIO1_IO08__PWM1_OUT   0x7f
@@ -431,6 +509,12 @@
 		>;
 	};
 
+	pinctrl_pwm4: pwm4grp{
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO11__PWM4_OUT	0x7f
+		>;
+	};
+
 	pinctrl_reg_wlreg_on: regregongrp {
 		fsl,pins = <
 			MX7D_PAD_ECSPI1_SCLK__GPIO4_IO16	0x59
@@ -577,6 +661,12 @@
 		>;
 	};
 
+	pinctrl_reg_lcdreg_on: reglcdongrp {
+	fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6	0x59
+		>;
+	};
+
 	pinctrl_wdog: wdoggrp {
 		fsl,pins = <
 			MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B	0x74
diff --git a/arch/arm/boot/dts/imx7d-sdb-reva.dts b/arch/arm/boot/dts/imx7d-sdb-reva.dts
index 7ce9d8c91985..cabdaa6dc518 100644
--- a/arch/arm/boot/dts/imx7d-sdb-reva.dts
+++ b/arch/arm/boot/dts/imx7d-sdb-reva.dts
@@ -7,6 +7,9 @@
 #include "imx7d-sdb.dts"
 
 / {
+	model = "Freescale i.MX7 SabreSD RevA Board";
+	compatible = "fsl,imx7d-sdb-reva", "fsl,imx7d";
+
 	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
 		pinctrl-0 = <&pinctrl_usb_otg2_vbus_reg_reva>;
 		gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
index d8acd7cc7918..92f6d0c2a74f 100644
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ b/arch/arm/boot/dts/imx7d.dtsi
@@ -12,7 +12,7 @@
 			clock-frequency = <996000000>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			#cooling-cells = <2>;
-			nvmem-cells = <&cpu_speed_grade>;
+			nvmem-cells = <&fuse_grade>;
 			nvmem-cell-names = "speed_grade";
 		};
 
diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
index 1b812f4e7453..568d7a984aa6 100644
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -152,8 +152,7 @@
 		interrupt-parent = <&gpc>;
 		interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
 		fsl,tempmon = <&anatop>;
-		nvmem-cells = <&tempmon_calib>,
-			<&tempmon_temp_grade>;
+		nvmem-cells = <&tempmon_calib>,	<&fuse_grade>;
 		nvmem-cell-names = "calib", "temp_grade";
 		clocks = <&clks IMX7D_PLL_SYS_MAIN_CLK>;
 	};
@@ -548,11 +547,7 @@
 					reg = <0x3c 0x4>;
 				};
 
-				tempmon_temp_grade: temp-grade@10 {
-					reg = <0x10 0x4>;
-				};
-
-				cpu_speed_grade: speed-grade@10 {
+				fuse_grade: fuse-grade@10 {
 					reg = <0x10 0x4>;
 				};
 			};
@@ -658,6 +653,12 @@
 						reg = <1>;
 						power-supply = <&reg_1p0d>;
 					};
+
+					pgc_hsic_phy: power-domain@2 {
+						#power-domain-cells = <0>;
+						reg = <2>;
+						power-supply = <&reg_1p2>;
+					};
 				};
 			};
 		};
@@ -1101,6 +1102,7 @@
 				compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
 				reg = <0x30b30000 0x200>;
 				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&pgc_hsic_phy>;
 				clocks = <&clks IMX7D_USB_CTRL_CLK>;
 				fsl,usbphy = <&usbphynop3>;
 				fsl,usbmisc = <&usbmisc3 0>;
diff --git a/arch/arm/boot/dts/imx7ulp-com.dts b/arch/arm/boot/dts/imx7ulp-com.dts
new file mode 100644
index 000000000000..d76fea3b35c6
--- /dev/null
+++ b/arch/arm/boot/dts/imx7ulp-com.dts
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2019 NXP
+
+/dts-v1/;
+
+#include "imx7ulp.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Embedded Artists i.MX7ULP COM";
+	compatible = "ea,imx7ulp-com", "fsl,imx7ulp";
+
+	chosen {
+		stdout-path = &lpuart4;
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x4000000>;
+	};
+};
+
+&lpuart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart4>;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1_id>;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
+
+&usdhc0 {
+	assigned-clocks = <&pcc2 IMX7ULP_CLK_USDHC0>;
+	assigned-clock-parents = <&scg1 IMX7ULP_CLK_APLL_PFD1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc0>;
+	non-removable;
+	bus-width = <8>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&iomuxc1 {
+	pinctrl_lpuart4: lpuart4grp {
+		fsl,pins = <
+			IMX7ULP_PAD_PTC3__LPUART4_RX	0x3
+			IMX7ULP_PAD_PTC2__LPUART4_TX	0x3
+		>;
+	};
+
+	pinctrl_usbotg1_id: otg1idgrp {
+		fsl,pins = <
+			IMX7ULP_PAD_PTC13__USB0_ID	0x10003
+		>;
+	};
+
+	pinctrl_usdhc0: usdhc0grp {
+		fsl,pins = <
+			IMX7ULP_PAD_PTD1__SDHC0_CMD	0x43
+			IMX7ULP_PAD_PTD2__SDHC0_CLK	0x10042
+			IMX7ULP_PAD_PTD3__SDHC0_D7	0x43
+			IMX7ULP_PAD_PTD4__SDHC0_D6	0x43
+			IMX7ULP_PAD_PTD5__SDHC0_D5	0x43
+			IMX7ULP_PAD_PTD6__SDHC0_D4	0x43
+			IMX7ULP_PAD_PTD7__SDHC0_D3	0x43
+			IMX7ULP_PAD_PTD8__SDHC0_D2	0x43
+			IMX7ULP_PAD_PTD9__SDHC0_D1	0x43
+			IMX7ULP_PAD_PTD10__SDHC0_D0	0x43
+			IMX7ULP_PAD_PTD11__SDHC0_DQS	0x42
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/iwg20d-q7-common.dtsi b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
index ae75a1db3d9a..ebbe1518ef8a 100644
--- a/arch/arm/boot/dts/iwg20d-q7-common.dtsi
+++ b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
@@ -46,6 +46,49 @@
 		clock-frequency = <26000000>;
 	};
 
+	lcd_backlight: backlight {
+		compatible = "pwm-backlight";
+
+		pwms = <&pwm3 0 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		enable-gpios = <&gpio5 14 GPIO_ACTIVE_HIGH>;
+	};
+
+	lvds-receiver {
+		compatible = "ti,ds90cf384a", "lvds-decoder";
+		powerdown-gpios = <&gpio7 25 GPIO_ACTIVE_LOW>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				lvds_receiver_in: endpoint {
+					remote-endpoint = <&lvds0_out>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				lvds_receiver_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+	};
+
+	panel {
+		compatible = "edt,etm0700g0dh6";
+		backlight = <&lcd_backlight>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds_receiver_out>;
+			};
+		};
+	};
+
 	reg_1p5v: 1p5v {
 		compatible = "regulator-fixed";
 		regulator-name = "1P5V";
@@ -89,8 +132,7 @@
 
 		gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
 		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
+		states = <3300000 1>, <1800000 0>;
 	};
 };
 
@@ -120,6 +162,18 @@
 	status = "okay";
 };
 
+&du {
+	status = "okay";
+};
+
+&gpio2 {
+	touch-interrupt {
+		gpio-hog;
+		gpios = <12 GPIO_ACTIVE_LOW>;
+		input;
+	};
+};
+
 &hsusb {
 	status = "okay";
 	pinctrl-0 = <&usb0_pins>;
@@ -147,6 +201,25 @@
 		VDDIO-supply = <&reg_3p3v>;
 		VDDD-supply = <&reg_1p5v>;
 	};
+
+	touch: touchpanel@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&lvds0 {
+	status = "okay";
+
+	ports {
+		port@1 {
+			lvds0_out: endpoint {
+				remote-endpoint = <&lvds_receiver_in>;
+			};
+		};
+	};
 };
 
 &pci0 {
@@ -180,6 +253,11 @@
 		function = "i2c2";
 	};
 
+	pwm3_pins: pwm3 {
+		groups = "pwm3";
+		function = "pwm3";
+	};
+
 	scif0_pins: scif0 {
 		groups = "scif0_data_d";
 		function = "scif0";
@@ -218,6 +296,12 @@
 	};
 };
 
+&pwm3 {
+	pinctrl-0 = <&pwm3_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
 &rcar_sound {
 	pinctrl-0 = <&sound_pins>;
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi b/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi
index 0e99df218252..ede2e0c999b1 100644
--- a/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi
+++ b/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi
@@ -39,7 +39,6 @@
 &du {
 	pinctrl-0 = <&du_pins>;
 	pinctrl-names = "default";
-	status = "okay";
 
 	ports {
 		port@0 {
diff --git a/arch/arm/boot/dts/ls1021a-tsn.dts b/arch/arm/boot/dts/ls1021a-tsn.dts
index 5b7689094b70..9d8f0c2a8aba 100644
--- a/arch/arm/boot/dts/ls1021a-tsn.dts
+++ b/arch/arm/boot/dts/ls1021a-tsn.dts
@@ -203,11 +203,15 @@
 	/* AR8031 */
 	sgmii_phy1: ethernet-phy@1 {
 		reg = <0x1>;
+		/* SGMII1_PHY_INT_B: connected to IRQ2, active low */
+		interrupts-extended = <&extirq 2 IRQ_TYPE_LEVEL_LOW>;
 	};
 
 	/* AR8031 */
 	sgmii_phy2: ethernet-phy@2 {
 		reg = <0x2>;
+		/* SGMII2_PHY_INT_B: connected to IRQ2, active low */
+		interrupts-extended = <&extirq 2 IRQ_TYPE_LEVEL_LOW>;
 	};
 
 	/* BCM5464 quad PHY */
diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index 2f6977ada447..0855b1fe98e0 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -216,6 +216,25 @@
 			compatible = "fsl,ls1021a-scfg", "syscon";
 			reg = <0x0 0x1570000 0x0 0x10000>;
 			big-endian;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x1570000 0x10000>;
+
+			extirq: interrupt-controller@1ac {
+				compatible = "fsl,ls1021a-extirq";
+				#interrupt-cells = <2>;
+				#address-cells = <0>;
+				interrupt-controller;
+				reg = <0x1ac 4>;
+				interrupt-map =
+					<0 0 &gic GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+					<1 0 &gic GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+					<2 0 &gic GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+					<3 0 &gic GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+					<4 0 &gic GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+					<5 0 &gic GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-map-mask = <0xffffffff 0x0>;
+			};
 		};
 
 		crypto: crypto@1700000 {
diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi
index c4447f6c8b2c..5d198309058a 100644
--- a/arch/arm/boot/dts/meson.dtsi
+++ b/arch/arm/boot/dts/meson.dtsi
@@ -282,4 +282,11 @@
 			};
 		};
 	};
+
+	xtal: xtal-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal";
+		#clock-cells = <0>;
+	};
 }; /* end of / */
diff --git a/arch/arm/boot/dts/meson6.dtsi b/arch/arm/boot/dts/meson6.dtsi
index 2d31b7ce3f8c..4716030a48d0 100644
--- a/arch/arm/boot/dts/meson6.dtsi
+++ b/arch/arm/boot/dts/meson6.dtsi
@@ -36,13 +36,6 @@
 		ranges = <0x0 0xd0000000 0x40000>;
 	};
 
-	xtal: xtal-clk {
-		compatible = "fixed-clock";
-		clock-frequency = <24000000>;
-		clock-output-names = "xtal";
-		#clock-cells = <0>;
-	};
-
 	clk81: clk@0 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi
index 3c534cd50ee3..eedb92526968 100644
--- a/arch/arm/boot/dts/meson8.dtsi
+++ b/arch/arm/boot/dts/meson8.dtsi
@@ -3,6 +3,7 @@
  * Copyright 2014 Carlo Caione <carlo@caione.org>
  */
 
+#include <dt-bindings/clock/meson8-ddr-clkc.h>
 #include <dt-bindings/clock/meson8b-clkc.h>
 #include <dt-bindings/gpio/meson8-gpio.h>
 #include <dt-bindings/reset/amlogic,meson8b-clkc-reset.h>
@@ -129,8 +130,8 @@
 	gpu_opp_table: gpu-opp-table {
 		compatible = "operating-points-v2";
 
-		opp-182150000 {
-			opp-hz = /bits/ 64 <182150000>;
+		opp-182142857 {
+			opp-hz = /bits/ 64 <182142857>;
 			opp-microvolt = <1150000>;
 		};
 		opp-318750000 {
@@ -195,6 +196,14 @@
 		#size-cells = <1>;
 		ranges = <0x0 0xc8000000 0x8000>;
 
+		ddr_clkc: clock-controller@400 {
+			compatible = "amlogic,meson8-ddr-clkc";
+			reg = <0x400 0x20>;
+			clocks = <&xtal>;
+			clock-names = "xtal";
+			#clock-cells = <1>;
+		};
+
 		dmcbus: bus@6000 {
 			compatible = "simple-bus";
 			reg = <0x6000 0x400>;
@@ -455,6 +464,8 @@
 &hhi {
 	clkc: clock-controller {
 		compatible = "amlogic,meson8-clkc";
+		clocks = <&xtal>, <&ddr_clkc DDR_CLKID_DDR_PLL>;
+		clock-names = "xtal", "ddr_pll";
 		#clock-cells = <1>;
 		#reset-cells = <1>;
 	};
@@ -529,8 +540,7 @@
 
 &saradc {
 	compatible = "amlogic,meson8-saradc", "amlogic,meson-saradc";
-	clocks = <&clkc CLKID_XTAL>,
-		<&clkc CLKID_SAR_ADC>;
+	clocks = <&xtal>, <&clkc CLKID_SAR_ADC>;
 	clock-names = "clkin", "core";
 	amlogic,hhi-sysctrl = <&hhi>;
 	nvmem-cells = <&temperature_calib>;
@@ -548,31 +558,31 @@
 };
 
 &timer_abcde {
-	clocks = <&clkc CLKID_XTAL>, <&clkc CLKID_CLK81>;
+	clocks = <&xtal>, <&clkc CLKID_CLK81>;
 	clock-names = "xtal", "pclk";
 };
 
 &uart_AO {
 	compatible = "amlogic,meson8-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_CLK81>;
+	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_CLK81>;
 	clock-names = "baud", "xtal", "pclk";
 };
 
 &uart_A {
 	compatible = "amlogic,meson8-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_UART0>;
+	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART0>;
 	clock-names = "baud", "xtal", "pclk";
 };
 
 &uart_B {
 	compatible = "amlogic,meson8-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_UART1>;
+	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART1>;
 	clock-names = "baud", "xtal", "pclk";
 };
 
 &uart_C {
 	compatible = "amlogic,meson8-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_UART2>;
+	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART2>;
 	clock-names = "baud", "xtal", "pclk";
 };
 
diff --git a/arch/arm/boot/dts/meson8b-ec100.dts b/arch/arm/boot/dts/meson8b-ec100.dts
index bed1dfef1985..163a200d5a7b 100644
--- a/arch/arm/boot/dts/meson8b-ec100.dts
+++ b/arch/arm/boot/dts/meson8b-ec100.dts
@@ -377,7 +377,7 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_c1_pins>, <&pwm_d_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_XTAL>, <&clkc CLKID_XTAL>;
+	clocks = <&xtal>, <&xtal>;
 	clock-names = "clkin0", "clkin1";
 };
 
diff --git a/arch/arm/boot/dts/meson8b-mxq.dts b/arch/arm/boot/dts/meson8b-mxq.dts
index 6e39ad52e42d..33037ef62d0a 100644
--- a/arch/arm/boot/dts/meson8b-mxq.dts
+++ b/arch/arm/boot/dts/meson8b-mxq.dts
@@ -165,7 +165,7 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_c1_pins>, <&pwm_d_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_XTAL>, <&clkc CLKID_XTAL>;
+	clocks = <&xtal>, <&xtal>;
 	clock-names = "clkin0", "clkin1";
 };
 
diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts
index a24eccc354b9..a2a47804fc4a 100644
--- a/arch/arm/boot/dts/meson8b-odroidc1.dts
+++ b/arch/arm/boot/dts/meson8b-odroidc1.dts
@@ -340,7 +340,7 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_c1_pins>, <&pwm_d_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_XTAL>, <&clkc CLKID_XTAL>;
+	clocks = <&xtal>, <&xtal>;
 	clock-names = "clkin0", "clkin1";
 };
 
diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi
index 099bf8e711c9..e34b039b9357 100644
--- a/arch/arm/boot/dts/meson8b.dtsi
+++ b/arch/arm/boot/dts/meson8b.dtsi
@@ -4,6 +4,7 @@
  * Author: Carlo Caione <carlo@endlessm.com>
  */
 
+#include <dt-bindings/clock/meson8-ddr-clkc.h>
 #include <dt-bindings/clock/meson8b-clkc.h>
 #include <dt-bindings/gpio/meson8b-gpio.h>
 #include <dt-bindings/reset/amlogic,meson8b-reset.h>
@@ -125,8 +126,8 @@
 			opp-hz = /bits/ 64 <255000000>;
 			opp-microvolt = <1100000>;
 		};
-		opp-364300000 {
-			opp-hz = /bits/ 64 <364300000>;
+		opp-364285714 {
+			opp-hz = /bits/ 64 <364285714>;
 			opp-microvolt = <1100000>;
 		};
 		opp-425000000 {
@@ -172,6 +173,14 @@
 		#size-cells = <1>;
 		ranges = <0x0 0xc8000000 0x8000>;
 
+		ddr_clkc: clock-controller@400 {
+			compatible = "amlogic,meson8b-ddr-clkc";
+			reg = <0x400 0x20>;
+			clocks = <&xtal>;
+			clock-names = "xtal";
+			#clock-cells = <1>;
+		};
+
 		dmcbus: bus@6000 {
 			compatible = "simple-bus";
 			reg = <0x6000 0x400>;
@@ -433,7 +442,9 @@
 
 &hhi {
 	clkc: clock-controller {
-		compatible = "amlogic,meson8-clkc";
+		compatible = "amlogic,meson8b-clkc";
+		clocks = <&xtal>, <&ddr_clkc DDR_CLKID_DDR_PLL>;
+		clock-names = "xtal", "ddr_pll";
 		#clock-cells = <1>;
 		#reset-cells = <1>;
 	};
@@ -508,8 +519,7 @@
 
 &saradc {
 	compatible = "amlogic,meson8b-saradc", "amlogic,meson-saradc";
-	clocks = <&clkc CLKID_XTAL>,
-		<&clkc CLKID_SAR_ADC>;
+	clocks = <&xtal>, <&clkc CLKID_SAR_ADC>;
 	clock-names = "clkin", "core";
 	amlogic,hhi-sysctrl = <&hhi>;
 	nvmem-cells = <&temperature_calib>;
@@ -523,31 +533,31 @@
 };
 
 &timer_abcde {
-	clocks = <&clkc CLKID_XTAL>, <&clkc CLKID_CLK81>;
+	clocks = <&xtal>, <&clkc CLKID_CLK81>;
 	clock-names = "xtal", "pclk";
 };
 
 &uart_AO {
 	compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_CLK81>;
+	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_CLK81>;
 	clock-names = "baud", "xtal", "pclk";
 };
 
 &uart_A {
 	compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_UART0>;
+	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART0>;
 	clock-names = "baud", "xtal", "pclk";
 };
 
 &uart_B {
 	compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_UART1>;
+	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART1>;
 	clock-names = "baud", "xtal", "pclk";
 };
 
 &uart_C {
 	compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_UART2>;
+	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART2>;
 	clock-names = "baud", "xtal", "pclk";
 };
 
diff --git a/arch/arm/boot/dts/mmp3-dell-ariel.dts b/arch/arm/boot/dts/mmp3-dell-ariel.dts
index c1947b5a688d..15449c72c042 100644
--- a/arch/arm/boot/dts/mmp3-dell-ariel.dts
+++ b/arch/arm/boot/dts/mmp3-dell-ariel.dts
@@ -49,6 +49,28 @@
 	status = "okay";
 };
 
+&hsic0 {
+	status = "okay";
+
+	usb1@1 {
+		compatible = "usb424,2640";
+		reg = <0x01>;
+		#address-cells = <0x01>;
+		#size-cells = <0x00>;
+
+		mass-storage@1 {
+			compatible = "usb424,4040";
+			reg = <0x01>;
+			status = "disabled";
+		};
+	};
+};
+
+&hsic_phy0 {
+	status = "okay";
+	reset-gpios = <&gpio 63 GPIO_ACTIVE_HIGH>;
+};
+
 &mmc3 {
 	status = "okay";
 	max-frequency = <50000000>;
diff --git a/arch/arm/boot/dts/mmp3.dtsi b/arch/arm/boot/dts/mmp3.dtsi
index 6f480827b94d..59a108e49b41 100644
--- a/arch/arm/boot/dts/mmp3.dtsi
+++ b/arch/arm/boot/dts/mmp3.dtsi
@@ -201,6 +201,50 @@
 				status = "disabled";
 			};
 
+			hsic_phy0: hsic-phy@f0001800 {
+				compatible = "marvell,mmp3-hsic-phy",
+					     "usb-nop-xceiv";
+				reg = <0xf0001800 0x40>;
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+
+			hsic0: hsic@f0001000 {
+				compatible = "marvell,pxau2o-ehci";
+				reg = <0xf0001000 0x200>;
+				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&soc_clocks MMP2_CLK_USBHSIC0>;
+				clock-names = "USBCLK";
+				phys = <&hsic_phy0>;
+				phy-names = "usb";
+				phy_type = "hsic";
+				#address-cells = <0x01>;
+				#size-cells = <0x00>;
+				status = "disabled";
+			};
+
+			hsic_phy1: hsic-phy@f0002800 {
+				compatible = "marvell,mmp3-hsic-phy",
+					     "usb-nop-xceiv";
+				reg = <0xf0002800 0x40>;
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+
+			hsic1: hsic@f0002000 {
+				compatible = "marvell,pxau2o-ehci";
+				reg = <0xf0002000 0x200>;
+				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&soc_clocks MMP2_CLK_USBHSIC1>;
+				clock-names = "USBCLK";
+				phys = <&hsic_phy1>;
+				phy-names = "usb";
+				phy_type = "hsic";
+				#address-cells = <0x01>;
+				#size-cells = <0x00>;
+				status = "disabled";
+			};
+
 			mmc1: mmc@d4280000 {
 				compatible = "mrvl,pxav3-mmc";
 				reg = <0xd4280000 0x120>;
diff --git a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi
index 936ad010c83a..e39eee628afd 100644
--- a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi
+++ b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi
@@ -27,11 +27,12 @@
 			compatible = "motorola,cpcap-battery";
 			interrupts-extended = <
 				&cpcap 6 0 &cpcap 5 0 &cpcap 3 0
-				&cpcap 20 0 &cpcap 54 0
+				&cpcap 20 0 &cpcap 54 0 &cpcap 57 0
 			>;
 			interrupt-names =
 				"eol", "lowbph", "lowbpl",
-				"chrgcurr1", "battdetb";
+				"chrgcurr1", "battdetb",
+				"cccal";
 			io-channels = <&cpcap_adc 0 &cpcap_adc 1
 				       &cpcap_adc 5 &cpcap_adc 6>;
 			io-channel-names = "battdetb", "battp",
diff --git a/arch/arm/boot/dts/motorola-mapphone-common.dtsi b/arch/arm/boot/dts/motorola-mapphone-common.dtsi
index da6b107da84a..85665506f4f8 100644
--- a/arch/arm/boot/dts/motorola-mapphone-common.dtsi
+++ b/arch/arm/boot/dts/motorola-mapphone-common.dtsi
@@ -249,6 +249,13 @@
 	};
 };
 
+/* Battery NVRAM on 1-wire handled by w1_ds250x driver */
+&hdqw1w {
+	pinctrl-0 = <&hdq_pins>;
+	pinctrl-names = "default";
+	ti,mode = "1w";
+};
+
 &i2c1 {
 	tmp105@48 {
 		compatible = "ti,tmp105";
@@ -440,6 +447,13 @@
 		>;
 	};
 
+	hdq_pins: pinmux_hdq_pins {
+		pinctrl-single,pins = <
+		/* 0x4a100120 hdq_sio.hdq_sio aa27 */
+		OMAP4_IOPAD(0x120, PIN_INPUT | MUX_MODE0)
+		>;
+	};
+
 	/* hdmi_cec.hdmi_cec, hdmi_scl.hdmi_scl, hdmi_sda.hdmi_sda */
 	dss_hdmi_pins: pinmux_dss_hdmi_pins {
 		pinctrl-single,pins = <
@@ -650,6 +664,11 @@
 	};
 };
 
+/* RNG is used by secure mode and not accessible */
+&rng_target {
+	status = "disabled";
+};
+
 /* Configure pwm clock source for timers 8 & 9 */
 &timer8 {
 	assigned-clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 24>;
diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi
index 000bf16de651..0e453fec2e3a 100644
--- a/arch/arm/boot/dts/omap2.dtsi
+++ b/arch/arm/boot/dts/omap2.dtsi
@@ -8,6 +8,7 @@
  * kind, whether express or implied.
  */
 
+#include <dt-bindings/bus/ti-sysc.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pinctrl/omap.h>
@@ -79,17 +80,37 @@
 			reg = <0x480FE000 0x1000>;
 		};
 
-		sdma: dma-controller@48056000 {
-			compatible = "ti,omap2430-sdma", "ti,omap2420-sdma";
-			ti,hwmods = "dma";
-			reg = <0x48056000 0x1000>;
-			interrupts = <12>,
-				     <13>,
-				     <14>,
-				     <15>;
-			#dma-cells = <1>;
-			dma-channels = <32>;
-			dma-requests = <64>;
+		target-module@48056000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x48056000 0x4>,
+			      <0x4805602c 0x4>,
+			      <0x48056028 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_EMUFREE |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			clocks = <&core_l3_ck>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x48056000 0x1000>;
+
+			sdma: dma-controller@0 {
+				compatible = "ti,omap2420-sdma", "ti,omap-sdma";
+				reg = <0 0x1000>;
+				interrupts = <12>,
+					     <13>,
+					     <14>,
+					     <15>;
+				#dma-cells = <1>;
+				dma-channels = <32>;
+				dma-requests = <64>;
+			};
 		};
 
 		i2c1: i2c@48070000 {
diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi
index 7f57af2f10ac..15ef7593be12 100644
--- a/arch/arm/boot/dts/omap2430.dtsi
+++ b/arch/arm/boot/dts/omap2430.dtsi
@@ -309,6 +309,10 @@
 	};
 };
 
+&sdma {
+	compatible = "ti,omap2430-sdma", "ti,omap-sdma";
+};
+
 &i2c1 {
 	compatible = "ti,omap2430-i2c";
 };
diff --git a/arch/arm/boot/dts/omap3-echo.dts b/arch/arm/boot/dts/omap3-echo.dts
new file mode 100644
index 000000000000..93ffeddada1e
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-echo.dts
@@ -0,0 +1,461 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2019 André Hentschel <nerv@dawncrow.de>
+ */
+/dts-v1/;
+
+#include "dm3725.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Amazon Echo (first generation)";
+	compatible = "amazon,omap3-echo", "ti,omap3630", "ti,omap3";
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vdd1_reg>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0xc600000>; /* 198 MB */
+	};
+
+	vcc5v: fixedregulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc3v3: fixedregulator1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc1v8: fixedregulator2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <40>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&button_pins>;
+
+		mute-button {
+			label = "mute";
+			linux,code = <KEY_MUTE>;
+			gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;	/* GPIO_70 */
+			wakeup-source;
+		};
+
+		help-button {
+			label = "help";
+			linux,code = <KEY_HELP>;
+			gpios = <&gpio3 8 GPIO_ACTIVE_LOW>;	/* GPIO_72 */
+			wakeup-source;
+		};
+	};
+
+	rotary: rotary-encoder {
+		compatible = "rotary-encoder";
+		gpios = <
+			&gpio3  5 GPIO_ACTIVE_HIGH /* GPIO_69 */
+			&gpio3 12 GPIO_ACTIVE_HIGH /* GPIO_76 */
+		>;
+		linux,axis = <REL_X>;
+		rotary-encoder,relative-axis;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+
+	tps: tps@2d {
+		reg = <0x2d>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+
+	lp5523A: lp5523A@32 {
+		compatible = "national,lp5523";
+		label = "q1";
+		reg = <0x32>;
+		clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
+		enable-gpio = <&gpio4 13 GPIO_ACTIVE_HIGH>; /* GPIO_109 */
+
+		chan0 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan1 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan2 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan3 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan4 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan5 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan6 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan7 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan8 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+	};
+
+	lp5523B: lp5523B@33 {
+		compatible = "national,lp5523";
+		label = "q3";
+		reg = <0x33>;
+		clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
+
+		chan0 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan1 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan2 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan3 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan4 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan5 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan6 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan7 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan8 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+	};
+
+	lp5523C: lp5523C@34 {
+		compatible = "national,lp5523";
+		label = "q4";
+		reg = <0x34>;
+		clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
+
+		chan0 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan1 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan2 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan3 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan4 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan5 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan6 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan7 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan8 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+	};
+
+	lp5523D: lp552D@35 {
+		compatible = "national,lp5523";
+		label = "q2";
+		reg = <0x35>;
+		clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
+
+		chan0 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan1 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan2 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan3 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan4 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan5 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan6 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan7 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan8 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+	};
+};
+
+#include "tps65910.dtsi"
+
+&omap3_pmx_core {
+	tps_pins: pinmux_tps_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21e0, PIN_INPUT_PULLUP | PIN_OFF_INPUT_PULLUP | PIN_OFF_OUTPUT_LOW | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* sys_nirq.sys_nirq */
+		>;
+	};
+
+	button_pins: pinmux_button_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20dc, PIN_INPUT | MUX_MODE4)	/* dss_data0.gpio_70 */
+			OMAP3_CORE1_IOPAD(0x20e0, PIN_INPUT | MUX_MODE4)	/* dss_data2.gpio_72 */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_clk.sdmmc1_clk */
+			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_cmd.sdmmc1_cmd */
+			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat0.sdmmc1_dat0 */
+			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat1.sdmmc1_dat1 */
+			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat2.sdmmc1_dat2 */
+			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat3.sdmmc1_dat3 */
+		>;
+	};
+
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_clk.sdmmc2_clk */
+			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_cmd.sdmmc2_cmd */
+			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat0.sdmmc2_dat0 */
+			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat1.sdmmc2_dat1 */
+			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat2.sdmmc2_dat2 */
+			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat3.sdmmc2_dat3 */
+			OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat4.sdmmc2_dat4 */
+			OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat5.sdmmc2_dat5 */
+			OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat6.sdmmc2_dat6 */
+			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat7.sdmmc2_dat7 */
+		>;
+	};
+};
+
+&omap3_pmx_core2 {
+	mmc3_pins: pinmux_mmc3_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_clk.sdmmc3_clk */
+			OMAP3630_CORE2_IOPAD(0x25da, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_ctl.sdmmc3_cmd */
+			OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d3.sdmmc3_dat3 */
+			OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d4.sdmmc3_dat0 */
+			OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d5.sdmmc3_dat1 */
+			OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d6.sdmmc3_dat2 */
+		>;
+	};
+};
+
+&mmc1 {
+	status = "okay";
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&vmmc_reg>;
+};
+
+&mmc2 {
+	status = "okay";
+	bus-width = <8>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&vmmc_reg>;
+};
+
+&mmc3 {
+	status = "okay";
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins>;
+	non-removable;
+	disable-wp;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	vmmc-supply = <&vcc3v3>;
+	vqmmc-supply = <&vcc1v8>;
+};
+
+&tps {
+	pinctrl-names = "default";
+	pinctrl-0 = <&tps_pins>;
+
+	interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+	interrupt-parent = <&intc>;
+
+	ti,en-ck32k-xtal;
+	ti,system-power-controller;
+
+	vcc1-supply = <&vcc5v>;
+	vcc2-supply = <&vcc5v>;
+	vcc3-supply = <&vcc5v>;
+	vcc4-supply = <&vcc5v>;
+	vcc5-supply = <&vcc5v>;
+	vcc6-supply = <&vcc5v>;
+	vcc7-supply = <&vcc5v>;
+	vccio-supply = <&vcc5v>;
+
+	regulators {
+
+		vio_reg: regulator@1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		vdd1_reg: regulator@2 {
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <600000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd2_reg: regulator@3 {
+			regulator-name = "vdd_dsp";
+			regulator-min-microvolt = <600000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-always-on;
+		};
+
+		vdd3_reg: regulator@4 {
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+
+		vdig1_reg: regulator@5 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <2700000>;
+			regulator-always-on;
+		};
+
+		vdig2_reg: regulator@6 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		vpll_reg: regulator@7 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <2500000>;
+			regulator-always-on;
+		};
+
+		vdac_reg: regulator@8 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		vaux1_reg: regulator@9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2850000>;
+			regulator-always-on;
+		};
+
+		vaux2_reg: regulator@10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		vaux33_reg: regulator@11 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		vmmc_reg: regulator@12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-always-on;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index a638e059135b..c3c6d7d04a76 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -482,6 +482,11 @@
 	regulator-always-on;
 };
 
+/* First two dma channels are reserved on secure omap3 */
+&sdma {
+	dma-channel-mask = <0xfffffffc>;
+};
+
 &twl {
 	twl_audio: audio {
 		compatible = "ti,twl4030-audio";
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 5698a3e241aa..634ea16a711e 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -206,17 +206,41 @@
 			reg = <0x48200000 0x1000>;
 		};
 
-		sdma: dma-controller@48056000 {
-			compatible = "ti,omap3630-sdma", "ti,omap3430-sdma";
-			reg = <0x48056000 0x1000>;
-			interrupts = <12>,
-				     <13>,
-				     <14>,
-				     <15>;
-			#dma-cells = <1>;
-			dma-channels = <32>;
-			dma-requests = <96>;
-			ti,hwmods = "dma";
+		target-module@48056000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x48056000 0x4>,
+			      <0x4805602c 0x4>,
+			      <0x48056028 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_EMUFREE |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, core_pwrdm, core_l3_clkdm */
+			clocks = <&core_l3_ick>;
+			clock-names = "ick";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x48056000 0x1000>;
+
+			sdma: dma-controller@0 {
+				compatible = "ti,omap3430-sdma", "ti,omap-sdma";
+				reg = <0x0 0x1000>;
+				interrupts = <12>,
+					     <13>,
+					     <14>,
+					     <15>;
+				#dma-cells = <1>;
+				dma-channels = <32>;
+				dma-requests = <96>;
+			};
 		};
 
 		gpio1: gpio@48310000 {
diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi
index c618cb257d00..71f3c8f1f924 100644
--- a/arch/arm/boot/dts/omap36xx.dtsi
+++ b/arch/arm/boot/dts/omap36xx.dtsi
@@ -223,6 +223,10 @@
 	};
 };
 
+&sdma {
+	compatible = "ti,omap3630-sdma", "ti,omap-sdma";
+};
+
 /* OMAP3630 needs dss_96m_fck for VENC */
 &venc {
 	clocks = <&dss_tv_fck>, <&dss_96m_fck>;
diff --git a/arch/arm/boot/dts/omap4-l4-abe.dtsi b/arch/arm/boot/dts/omap4-l4-abe.dtsi
index 6c892fc9d726..a6feb201c569 100644
--- a/arch/arm/boot/dts/omap4-l4-abe.dtsi
+++ b/arch/arm/boot/dts/omap4-l4-abe.dtsi
@@ -219,7 +219,6 @@
 
 		target-module@2e000 {			/* 0x4012e000, ap 12 0c.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "dmic";
 			reg = <0x2e000 0x4>,
 			      <0x2e010 0x4>;
 			reg-names = "rev", "sysc";
@@ -279,7 +278,6 @@
 
 		mcpdm_module: target-module@32000 {	/* 0x40132000, ap 16 10.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "mcpdm";
 			reg = <0x32000 0x4>,
 			      <0x32010 0x4>;
 			reg-names = "rev", "sysc";
@@ -314,7 +312,6 @@
 
 		target-module@38000 {			/* 0x40138000, ap 18 12.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer5";
 			reg = <0x38000 0x4>,
 			      <0x38010 0x4>;
 			reg-names = "rev", "sysc";
@@ -345,7 +342,6 @@
 
 		target-module@3a000 {			/* 0x4013a000, ap 20 14.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer6";
 			reg = <0x3a000 0x4>,
 			      <0x3a010 0x4>;
 			reg-names = "rev", "sysc";
@@ -376,7 +372,6 @@
 
 		target-module@3c000 {			/* 0x4013c000, ap 22 16.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer7";
 			reg = <0x3c000 0x4>,
 			      <0x3c010 0x4>;
 			reg-names = "rev", "sysc";
@@ -407,7 +402,6 @@
 
 		target-module@3e000 {			/* 0x4013e000, ap 24 18.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer8";
 			reg = <0x3e000 0x4>,
 			      <0x3e010 0x4>;
 			reg-names = "rev", "sysc";
@@ -466,7 +460,6 @@
 
 		target-module@f1000 {			/* 0x401f1000, ap 32 20.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "aess";
 			reg = <0xf1000 0x4>,
 			      <0xf1010 0x4>;
 			reg-names = "rev", "sysc";
diff --git a/arch/arm/boot/dts/omap4-l4.dtsi b/arch/arm/boot/dts/omap4-l4.dtsi
index 83f803be8ee2..459fd7027591 100644
--- a/arch/arm/boot/dts/omap4-l4.dtsi
+++ b/arch/arm/boot/dts/omap4-l4.dtsi
@@ -136,7 +136,6 @@
 
 		target-module@56000 {			/* 0x4a056000, ap 7 0a.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "dma_system";
 			reg = <0x56000 0x4>,
 			      <0x5602c 0x4>,
 			      <0x56028 0x4>;
@@ -160,7 +159,7 @@
 			ranges = <0x0 0x56000 0x1000>;
 
 			sdma: dma-controller@0 {
-				compatible = "ti,omap4430-sdma";
+				compatible = "ti,omap4430-sdma", "ti,omap-sdma";
 				reg = <0x0 0x1000>;
 				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
@@ -174,7 +173,6 @@
 
 		target-module@58000 {			/* 0x4a058000, ap 10 0e.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "hsi";
 			reg = <0x58000 0x4>,
 			      <0x58010 0x4>,
 			      <0x58014 0x4>;
@@ -321,7 +319,6 @@
 
 		target-module@66000 {			/* 0x4a066000, ap 25 26.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "mmu_dsp";
 			reg = <0x66000 0x4>,
 			      <0x66010 0x4>,
 			      <0x66014 0x4>;
@@ -335,12 +332,18 @@
 			/* Domains (V, P, C): iva, tesla_pwrdm, tesla_clkdm */
 			clocks = <&tesla_clkctrl OMAP4_DSP_CLKCTRL 0>;
 			clock-names = "fck";
+			resets = <&prm_tesla 1>;
+			reset-names = "rstctrl";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x0 0x66000 0x1000>;
 
-			/* mmu_dsp cannot be moved before reset driver */
-			status = "disabled";
+			mmu_dsp: mmu@0 {
+				compatible = "ti,omap4-iommu";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				#iommu-cells = <0>;
+			};
 		};
 	};
 
@@ -420,7 +423,6 @@
 
 		target-module@2d000 {			/* 0x4a0ad000, ap 88 0c.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "ocp2scp_usb_phy";
 			reg = <0x2d000 0x4>,
 			      <0x2d010 0x4>,
 			      <0x2d014 0x4>;
@@ -499,7 +501,6 @@
 
 		target-module@59000 {			/* 0x4a0d9000, ap 13 1a.0 */
 			compatible = "ti,sysc-omap4-sr", "ti,sysc";
-			ti,hwmods = "smartreflex_mpu";
 			reg = <0x59038 0x4>;
 			reg-names = "sysc";
 			ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
@@ -523,7 +524,6 @@
 
 		target-module@5b000 {			/* 0x4a0db000, ap 15 08.0 */
 			compatible = "ti,sysc-omap4-sr", "ti,sysc";
-			ti,hwmods = "smartreflex_iva";
 			reg = <0x5b038 0x4>;
 			reg-names = "sysc";
 			ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
@@ -547,7 +547,6 @@
 
 		target-module@5d000 {			/* 0x4a0dd000, ap 17 22.0 */
 			compatible = "ti,sysc-omap4-sr", "ti,sysc";
-			ti,hwmods = "smartreflex_core";
 			reg = <0x5d038 0x4>;
 			reg-names = "sysc";
 			ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
@@ -613,7 +612,6 @@
 
 		target-module@76000 {			/* 0x4a0f6000, ap 29 3a.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "spinlock";
 			reg = <0x76000 0x4>,
 			      <0x76010 0x4>,
 			      <0x76014 0x4>;
@@ -721,7 +719,6 @@
 
 		target-module@a000 {			/* 0x4a10a000, ap 65 50.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "fdif";
 			reg = <0xa000 0x4>,
 			      <0xa010 0x4>;
 			reg-names = "rev", "sysc";
@@ -1177,7 +1174,6 @@
 
 		target-module@c000 {			/* 0x4a31c000, ap 11 20.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "kbd";
 			reg = <0xc000 0x4>,
 			      <0xc010 0x4>,
 			      <0xc014 0x4>;
@@ -1422,7 +1418,6 @@
 
 		target-module@32000 {			/* 0x48032000, ap 5 02.0 */
 			compatible = "ti,sysc-omap2-timer", "ti,sysc";
-			ti,hwmods = "timer2";
 			reg = <0x32000 0x4>,
 			      <0x32010 0x4>,
 			      <0x32014 0x4>;
@@ -1454,7 +1449,6 @@
 
 		target-module@34000 {			/* 0x48034000, ap 7 04.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer3";
 			reg = <0x34000 0x4>,
 			      <0x34010 0x4>;
 			reg-names = "rev", "sysc";
@@ -1482,7 +1476,6 @@
 
 		target-module@36000 {			/* 0x48036000, ap 9 0e.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer4";
 			reg = <0x36000 0x4>,
 			      <0x36010 0x4>;
 			reg-names = "rev", "sysc";
@@ -1510,7 +1503,6 @@
 
 		target-module@3e000 {			/* 0x4803e000, ap 11 08.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer9";
 			reg = <0x3e000 0x4>,
 			      <0x3e010 0x4>;
 			reg-names = "rev", "sysc";
@@ -1892,7 +1884,6 @@
 
 		target-module@76000 {			/* 0x48076000, ap 39 38.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "slimbus2";
 			reg = <0x76000 0x4>,
 			      <0x76010 0x4>;
 			reg-names = "rev", "sysc";
@@ -1913,7 +1904,6 @@
 
 		target-module@78000 {			/* 0x48078000, ap 41 1a.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "elm";
 			reg = <0x78000 0x4>,
 			      <0x78010 0x4>,
 			      <0x78014 0x4>;
@@ -1942,7 +1932,6 @@
 
 		target-module@86000 {			/* 0x48086000, ap 43 24.0 */
 			compatible = "ti,sysc-omap2-timer", "ti,sysc";
-			ti,hwmods = "timer10";
 			reg = <0x86000 0x4>,
 			      <0x86010 0x4>,
 			      <0x86014 0x4>;
@@ -1975,7 +1964,6 @@
 
 		target-module@88000 {			/* 0x48088000, ap 45 2e.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer11";
 			reg = <0x88000 0x4>,
 			      <0x88010 0x4>;
 			reg-names = "rev", "sysc";
@@ -2002,12 +1990,26 @@
 			};
 		};
 
-		target-module@90000 {			/* 0x48090000, ap 57 2a.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
+		rng_target: target-module@90000 {	/* 0x48090000, ap 57 2a.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x91fe0 0x4>,
+			      <0x91fe4 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>;
+			/* Domains (P, C): l4per_pwrdm, l4_secure_clkdm */
+			clocks = <&l4_secure_clkctrl OMAP4_RNG_CLKCTRL 0>;
+			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x0 0x90000 0x2000>;
+
+			rng: rng@0 {
+				compatible = "ti,omap4-rng";
+				reg = <0x0 0x2000>;
+				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			};
 		};
 
 		target-module@96000 {			/* 0x48096000, ap 37 26.0 */
@@ -2171,6 +2173,35 @@
 				 <0x00001000 0x000a5000 0x00001000>;
 		};
 
+		des_target: target-module@a5000 {	/* 0x480a5000 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0xa5030 0x4>,
+			      <0xa5034 0x4>,
+			      <0xa5038 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4_secure_clkdm */
+			clocks = <&l4_secure_clkctrl OMAP4_DES3DES_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0xa5000 0x00001000>;
+
+			des: des@0 {
+				compatible = "ti,omap4-des";
+				reg = <0 0xa0>;
+				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&sdma 117>, <&sdma 116>;
+				dma-names = "tx", "rx";
+			};
+		};
+
 		target-module@a8000 {			/* 0x480a8000, ap 61 3e.0 */
 			compatible = "ti,sysc";
 			status = "disabled";
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 2de8a6b53de9..9a87440d0b9d 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -173,14 +173,6 @@
 			#gpio-cells = <2>;
 		};
 
-		mmu_dsp: mmu@4a066000 {
-			compatible = "ti,omap4-iommu";
-			reg = <0x4a066000 0x100>;
-			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmu_dsp";
-			#iommu-cells = <0>;
-		};
-
 		target-module@52000000 {
 			compatible = "ti,sysc-omap4", "ti,sysc";
 			ti,hwmods = "iss";
@@ -206,17 +198,37 @@
 			/* No child device binding, driver in staging */
 		};
 
-		mmu_ipu: mmu@55082000 {
-			compatible = "ti,omap4-iommu";
-			reg = <0x55082000 0x100>;
-			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmu_ipu";
-			#iommu-cells = <0>;
-			ti,iommu-bus-err-back;
+		target-module@55082000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x55082000 0x4>,
+			      <0x55082010 0x4>,
+			      <0x55082014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			clocks = <&ducati_clkctrl OMAP4_IPU_CLKCTRL 0>;
+			clock-names = "fck";
+			resets = <&prm_core 2>;
+			reset-names = "rstctrl";
+			ranges = <0x0 0x55082000 0x100>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+
+			mmu_ipu: mmu@0 {
+				compatible = "ti,omap4-iommu";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+				#iommu-cells = <0>;
+				ti,iommu-bus-err-back;
+			};
 		};
+
 		target-module@4012c000 {
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "slimbus1";
 			reg = <0x4012c000 0x4>,
 			      <0x4012c010 0x4>;
 			reg-names = "rev", "sysc";
@@ -266,40 +278,90 @@
 			hw-caps-temp-alert;
 		};
 
-		aes1: aes@4b501000 {
-			compatible = "ti,omap4-aes";
-			ti,hwmods = "aes1";
-			reg = <0x4b501000 0xa0>;
-			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&sdma 111>, <&sdma 110>;
-			dma-names = "tx", "rx";
-		};
-
-		aes2: aes@4b701000 {
-			compatible = "ti,omap4-aes";
-			ti,hwmods = "aes2";
-			reg = <0x4b701000 0xa0>;
-			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&sdma 114>, <&sdma 113>;
-			dma-names = "tx", "rx";
+		aes1_target: target-module@4b501000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x4b501080 0x4>,
+			      <0x4b501084 0x4>,
+			      <0x4b501088 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4_secure_clkdm */
+			clocks = <&l4_secure_clkctrl OMAP4_AES1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4b501000 0x1000>;
+
+			aes1: aes@0 {
+				compatible = "ti,omap4-aes";
+				reg = <0 0xa0>;
+				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&sdma 111>, <&sdma 110>;
+				dma-names = "tx", "rx";
+			};
 		};
 
-		des: des@480a5000 {
-			compatible = "ti,omap4-des";
-			ti,hwmods = "des";
-			reg = <0x480a5000 0xa0>;
-			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&sdma 117>, <&sdma 116>;
-			dma-names = "tx", "rx";
+		aes2_target: target-module@4b701000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x4b701080 0x4>,
+			      <0x4b701084 0x4>,
+			      <0x4b701088 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4_secure_clkdm */
+			clocks = <&l4_secure_clkctrl OMAP4_AES2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4b701000 0x1000>;
+
+			aes2: aes@0 {
+				compatible = "ti,omap4-aes";
+				reg = <0 0xa0>;
+				interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&sdma 114>, <&sdma 113>;
+				dma-names = "tx", "rx";
+			};
 		};
 
-		sham: sham@4b100000 {
-			compatible = "ti,omap4-sham";
-			ti,hwmods = "sham";
-			reg = <0x4b100000 0x300>;
-			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&sdma 119>;
-			dma-names = "rx";
+		sham_target: target-module@4b100000 {
+			compatible = "ti,sysc-omap3-sham", "ti,sysc";
+			reg = <0x4b100100 0x4>,
+			      <0x4b100110 0x4>,
+			      <0x4b100114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4_secure_clkdm */
+			clocks = <&l4_secure_clkctrl OMAP4_SHA2MD5_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4b100000 0x1000>;
+
+			sham: sham@0 {
+				compatible = "ti,omap4-sham";
+				reg = <0 0x300>;
+				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&sdma 119>;
+				dma-names = "rx";
+			};
 		};
 
 		abb_mpu: regulator-abb-mpu {
diff --git a/arch/arm/boot/dts/omap44xx-clocks.dtsi b/arch/arm/boot/dts/omap44xx-clocks.dtsi
index e9d9c8460682..532868591107 100644
--- a/arch/arm/boot/dts/omap44xx-clocks.dtsi
+++ b/arch/arm/boot/dts/omap44xx-clocks.dtsi
@@ -1279,13 +1279,18 @@
 		#size-cells = <1>;
 		ranges = <0 0x1400 0x200>;
 
-		l4_per_clkctrl: clk@20 {
-			compatible = "ti,clkctrl";
+		l4_per_clkctrl: clock@20 {
+			compatible = "ti,clkctrl-l4-per", "ti,clkctrl";
 			reg = <0x20 0x144>;
 			#clock-cells = <2>;
 		};
-	};
 
+		l4_secure_clkctrl: clock@1a0 {
+			compatible = "ti,clkctrl-l4-secure", "ti,clkctrl";
+			reg = <0x1a0 0x3c>;
+			#clock-cells = <2>;
+		};
+	};
 };
 
 &prm {
diff --git a/arch/arm/boot/dts/omap5-l4-abe.dtsi b/arch/arm/boot/dts/omap5-l4-abe.dtsi
index 23aa90716f7f..4ec7909df78b 100644
--- a/arch/arm/boot/dts/omap5-l4-abe.dtsi
+++ b/arch/arm/boot/dts/omap5-l4-abe.dtsi
@@ -203,7 +203,6 @@
 
 		target-module@2e000 {			/* 0x4012e000, ap 12 0c.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "dmic";
 			reg = <0x2e000 0x4>,
 			      <0x2e010 0x4>;
 			reg-names = "rev", "sysc";
@@ -244,7 +243,6 @@
 
 		mcpdm_module: target-module@32000 {	/* 0x40132000, ap 16 10.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "mcpdm";
 			reg = <0x32000 0x4>,
 			      <0x32010 0x4>;
 			reg-names = "rev", "sysc";
@@ -279,7 +277,6 @@
 
 		target-module@38000 {			/* 0x40138000, ap 18 12.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer5";
 			reg = <0x38000 0x4>,
 			      <0x38010 0x4>;
 			reg-names = "rev", "sysc";
@@ -311,7 +308,6 @@
 
 		target-module@3a000 {			/* 0x4013a000, ap 20 14.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer6";
 			reg = <0x3a000 0x4>,
 			      <0x3a010 0x4>;
 			reg-names = "rev", "sysc";
@@ -343,7 +339,6 @@
 
 		target-module@3c000 {			/* 0x4013c000, ap 22 16.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer7";
 			reg = <0x3c000 0x4>,
 			      <0x3c010 0x4>;
 			reg-names = "rev", "sysc";
@@ -374,7 +369,6 @@
 
 		target-module@3e000 {			/* 0x4013e000, ap 24 18.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer8";
 			reg = <0x3e000 0x4>,
 			      <0x3e010 0x4>;
 			reg-names = "rev", "sysc";
diff --git a/arch/arm/boot/dts/omap5-l4.dtsi b/arch/arm/boot/dts/omap5-l4.dtsi
index 25aacf1ba708..f68740abb8aa 100644
--- a/arch/arm/boot/dts/omap5-l4.dtsi
+++ b/arch/arm/boot/dts/omap5-l4.dtsi
@@ -213,7 +213,6 @@
 
 		target-module@56000 {			/* 0x4a056000, ap 7 02.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "dma_system";
 			reg = <0x56000 0x4>,
 			      <0x5602c 0x4>,
 			      <0x56028 0x4>;
@@ -237,7 +236,7 @@
 			ranges = <0x0 0x56000 0x1000>;
 
 			sdma: dma-controller@0 {
-				compatible = "ti,omap4430-sdma";
+				compatible = "ti,omap4430-sdma", "ti,omap-sdma";
 				reg = <0x0 0x1000>;
 				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
@@ -349,7 +348,6 @@
 
 		target-module@66000 {			/* 0x4a066000, ap 23 0a.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "mmu_dsp";
 			reg = <0x66000 0x4>,
 			      <0x66010 0x4>,
 			      <0x66014 0x4>;
@@ -364,12 +362,18 @@
 			/* Domains (V, P, C): mm, dsp_pwrdm, dsp_clkdm */
 			clocks = <&dsp_clkctrl OMAP5_MMU_DSP_CLKCTRL 0>;
 			clock-names = "fck";
+			resets = <&prm_dsp 1>;
+			reset-names = "rstctrl";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x0 0x66000 0x1000>;
 
-			/* mmu_dsp cannot be moved before reset driver */
-			status = "disabled";
+			mmu_dsp: mmu@0 {
+				compatible = "ti,omap4-iommu";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				#iommu-cells = <0>;
+			};
 		};
 
 		target-module@70000 {			/* 0x4a070000, ap 79 2e.0 */
@@ -430,7 +434,6 @@
 
 		target-module@0 {			/* 0x4a080000, ap 83 28.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "ocp2scp1";
 			reg = <0x0 0x4>,
 			      <0x10 0x4>,
 			      <0x14 0x4>;
@@ -488,7 +491,6 @@
 
 		target-module@10000 {			/* 0x4a090000, ap 89 36.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "ocp2scp3";
 			reg = <0x10000 0x4>,
 			      <0x10010 0x4>,
 			      <0x10014 0x4>;
@@ -627,7 +629,6 @@
 
 		target-module@76000 {			/* 0x4a0f6000, ap 27 0c.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "spinlock";
 			reg = <0x76000 0x4>,
 			      <0x76010 0x4>,
 			      <0x76014 0x4>;
@@ -1061,7 +1062,6 @@
 
 		target-module@32000 {			/* 0x48032000, ap 5 3e.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer2";
 			reg = <0x32000 0x4>,
 			      <0x32010 0x4>;
 			reg-names = "rev", "sysc";
@@ -1089,7 +1089,6 @@
 
 		target-module@34000 {			/* 0x48034000, ap 7 46.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer3";
 			reg = <0x34000 0x4>,
 			      <0x34010 0x4>;
 			reg-names = "rev", "sysc";
@@ -1117,7 +1116,6 @@
 
 		target-module@36000 {			/* 0x48036000, ap 9 4e.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer4";
 			reg = <0x36000 0x4>,
 			      <0x36010 0x4>;
 			reg-names = "rev", "sysc";
@@ -1145,7 +1143,6 @@
 
 		target-module@3e000 {			/* 0x4803e000, ap 11 56.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer9";
 			reg = <0x3e000 0x4>,
 			      <0x3e010 0x4>;
 			reg-names = "rev", "sysc";
@@ -1713,7 +1710,6 @@
 
 		target-module@86000 {			/* 0x48086000, ap 41 5e.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer10";
 			reg = <0x86000 0x4>,
 			      <0x86010 0x4>;
 			reg-names = "rev", "sysc";
@@ -1742,7 +1738,6 @@
 
 		target-module@88000 {			/* 0x48088000, ap 43 66.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer11";
 			reg = <0x88000 0x4>,
 			      <0x88010 0x4>;
 			reg-names = "rev", "sysc";
@@ -1769,12 +1764,26 @@
 			};
 		};
 
-		target-module@90000 {			/* 0x48090000, ap 55 1a.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
+		rng_target: target-module@90000 {	/* 0x48090000, ap 55 1a.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x91fe0 0x4>,
+			      <0x91fe4 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>;
+			/* Domains (P, C): l4per_pwrdm, l4sec_clkdm */
+			clocks = <&l4sec_clkctrl OMAP5_RNG_CLKCTRL 0>;
+			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x0 0x90000 0x2000>;
+
+			rng: rng@0 {
+				compatible = "ti,omap4-rng";
+				reg = <0x0 0x2000>;
+				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			};
 		};
 
 		target-module@98000 {			/* 0x48098000, ap 47 08.0 */
@@ -2358,7 +2367,6 @@
 
 		target-module@c000 {			/* 0x4ae1c000, ap 11 1c.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "kbd";
 			reg = <0xc000 0x4>,
 			      <0xc010 0x4>;
 			reg-names = "rev", "sysc";
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 1f6ad1debc90..d0ecf54d5a23 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -186,21 +186,33 @@
 			#gpio-cells = <2>;
 		};
 
-		mmu_dsp: mmu@4a066000 {
-			compatible = "ti,omap4-iommu";
-			reg = <0x4a066000 0x100>;
-			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmu_dsp";
-			#iommu-cells = <0>;
-		};
+		target-module@55082000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x55082000 0x4>,
+			      <0x55082010 0x4>,
+			      <0x55082014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			clocks = <&ipu_clkctrl OMAP5_MMU_IPU_CLKCTRL 0>;
+			clock-names = "fck";
+			resets = <&prm_core 2>;
+			reset-names = "rstctrl";
+			ranges = <0x0 0x55082000 0x100>;
+			#size-cells = <1>;
+			#address-cells = <1>;
 
-		mmu_ipu: mmu@55082000 {
-			compatible = "ti,omap4-iommu";
-			reg = <0x55082000 0x100>;
-			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmu_ipu";
-			#iommu-cells = <0>;
-			ti,iommu-bus-err-back;
+			mmu_ipu: mmu@0 {
+				compatible = "ti,omap4-iommu";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+				#iommu-cells = <0>;
+				ti,iommu-bus-err-back;
+			};
 		};
 
 		dmm@4e000000 {
diff --git a/arch/arm/boot/dts/omap54xx-clocks.dtsi b/arch/arm/boot/dts/omap54xx-clocks.dtsi
index 4791834dacb2..42f2c447727d 100644
--- a/arch/arm/boot/dts/omap54xx-clocks.dtsi
+++ b/arch/arm/boot/dts/omap54xx-clocks.dtsi
@@ -1125,11 +1125,17 @@
 		#size-cells = <1>;
 		ranges = <0 0x1000 0x200>;
 
-		l4per_clkctrl: clk@20 {
-			compatible = "ti,clkctrl";
+		l4per_clkctrl: clock@20 {
+			compatible = "ti,clkctrl-l4per", "ti,clkctrl";
 			reg = <0x20 0x15c>;
 			#clock-cells = <2>;
 		};
+
+		l4sec_clkctrl: clock@1a0 {
+			compatible = "ti,clkctrl-l4sec", "ti,clkctrl";
+			reg = <0x1a0 0x3c>;
+			#clock-cells = <2>;
+		};
 	};
 
 	dss_cm: dss_cm@1400 {
diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi
index 0a0fb147ebb9..fa1852eed37b 100644
--- a/arch/arm/boot/dts/qcom-apq8084.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8084.dtsi
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
+#include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,gcc-apq8084.h>
 #include <dt-bindings/gpio/gpio.h>
 
@@ -184,7 +185,7 @@
 
 	cpu-pmu {
 		compatible = "qcom,krait-pmu";
-		interrupts = <1 7 0xf04>;
+		interrupts = <GIC_PPI 7 0xf04>;
 	};
 
 	clocks {
@@ -203,10 +204,10 @@
 
 	timer {
 		compatible = "arm,armv7-timer";
-		interrupts = <1 2 0xf08>,
-			     <1 3 0xf08>,
-			     <1 4 0xf08>,
-			     <1 1 0xf08>;
+		interrupts = <GIC_PPI 2 0xf08>,
+			     <GIC_PPI 3 0xf08>,
+			     <GIC_PPI 4 0xf08>,
+			     <GIC_PPI 1 0xf08>;
 		clock-frequency = <19200000>;
 	};
 
@@ -253,12 +254,13 @@
 
 		tsens: thermal-sensor@fc4a8000 {
 			compatible = "qcom,msm8974-tsens";
-			reg = <0xfc4a8000 0x2000>;
+			reg = <0xfc4a9000 0x1000>, /* TM */
+			      <0xfc4a8000 0x1000>; /* SROT */
 			nvmem-cells = <&tsens_calib>, <&tsens_backup>;
 			nvmem-cell-names = "calib", "calib_backup";
+			#qcom,sensors = <11>;
 			#thermal-sensor-cells = <1>;
 		};
-
 		timer@f9020000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -269,50 +271,50 @@
 
 			frame@f9021000 {
 				frame-number = <0>;
-				interrupts = <0 8 0x4>,
-					     <0 7 0x4>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0xf9021000 0x1000>,
 				      <0xf9022000 0x1000>;
 			};
 
 			frame@f9023000 {
 				frame-number = <1>;
-				interrupts = <0 9 0x4>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0xf9023000 0x1000>;
 				status = "disabled";
 			};
 
 			frame@f9024000 {
 				frame-number = <2>;
-				interrupts = <0 10 0x4>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0xf9024000 0x1000>;
 				status = "disabled";
 			};
 
 			frame@f9025000 {
 				frame-number = <3>;
-				interrupts = <0 11 0x4>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0xf9025000 0x1000>;
 				status = "disabled";
 			};
 
 			frame@f9026000 {
 				frame-number = <4>;
-				interrupts = <0 12 0x4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0xf9026000 0x1000>;
 				status = "disabled";
 			};
 
 			frame@f9027000 {
 				frame-number = <5>;
-				interrupts = <0 13 0x4>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0xf9027000 0x1000>;
 				status = "disabled";
 			};
 
 			frame@f9028000 {
 				frame-number = <6>;
-				interrupts = <0 14 0x4>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0xf9028000 0x1000>;
 				status = "disabled";
 			};
@@ -404,13 +406,13 @@
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
-			interrupts = <0 208 0>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		blsp2_uart2: serial@f995e000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0xf995e000 0x1000>;
-			interrupts = <0 114 0x0>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
 			clock-names = "core", "iface";
 			status = "disabled";
@@ -420,7 +422,7 @@
 			compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4";
 			reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
 			reg-names = "hc_mem", "core_mem";
-			interrupts = <0 123 0>, <0 138 0>;
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "hc_irq", "pwr_irq";
 			clocks = <&gcc GCC_SDCC1_APPS_CLK>,
 				 <&gcc GCC_SDCC1_AHB_CLK>,
@@ -433,7 +435,7 @@
 			compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4";
 			reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
 			reg-names = "hc_mem", "core_mem";
-			interrupts = <0 125 0>, <0 221 0>;
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "hc_irq", "pwr_irq";
 			clocks = <&gcc GCC_SDCC2_APPS_CLK>,
 				 <&gcc GCC_SDCC2_AHB_CLK>,
@@ -449,7 +451,7 @@
 			      <0xfc4cb000 0x1000>,
 			      <0xfc4ca000 0x1000>;
 			interrupt-names = "periph_irq";
-			interrupts = <0 190 0>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
 			qcom,ee = <0>;
 			qcom,channel = <0>;
 			#address-cells = <2>;
@@ -463,7 +465,7 @@
 		compatible = "qcom,smd";
 
 		rpm {
-			interrupts = <0 168 1>;
+			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
 			qcom,ipc = <&apcs 8 0>;
 			qcom,smd-edge = <15>;
 
diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
index 8ef26da32ff4..71bb25a8afc0 100644
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -102,6 +102,7 @@
 		L2: l2-cache {
 			compatible = "cache";
 			cache-level = <2>;
+			qcom,saw = <&saw_l2>;
 		};
 	};
 
@@ -353,6 +354,12 @@
 			regulator;
 		};
 
+		saw_l2: regulator@b012000 {
+			compatible = "qcom,saw2";
+			reg = <0xb012000 0x1000>;
+			regulator;
+		};
+
 		blsp1_uart1: serial@78af000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0x78af000 0x200>;
diff --git a/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts b/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts
index 26160c324802..942e3a2cac35 100644
--- a/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts
+++ b/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts
@@ -143,7 +143,7 @@
 				compatible = "smsc,usb3503a";
 				reg = <0x8>;
 				connect-gpios = <&gpioext2 1 GPIO_ACTIVE_HIGH>;
-				intn-gpios = <&gpioext2 0 GPIO_ACTIVE_LOW>;
+				intn-gpios = <&gpioext2 0 GPIO_ACTIVE_HIGH>;
 				initial-mode = <1>;
 			};
 		};
diff --git a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
index 26160394d717..d2d48770ec0f 100644
--- a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
@@ -259,6 +259,25 @@
 		status = "ok";
 	};
 
+	remoteproc@fb21b000 {
+		status = "ok";
+
+		vddmx-supply = <&pm8841_s1>;
+		vddcx-supply = <&pm8841_s2>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wcnss_pin_a>;
+
+		smd-edge {
+			qcom,remote-pid = <4>;
+			label = "pronto";
+
+			wcnss {
+				status = "ok";
+			};
+		};
+	};
+
 	pinctrl@fd510000 {
 		sdhc1_pin_a: sdhc1-pin-active {
 			clk {
@@ -287,6 +306,32 @@
 				bias-pull-up;
 			};
 		};
+
+		wcnss_pin_a: wcnss-pin-active {
+			wlan {
+				pins =  "gpio36", "gpio37", "gpio38", "gpio39", "gpio40";
+				function = "wlan";
+
+				drive-strength = <6>;
+				bias-pull-down;
+			};
+
+			bt {
+				pins = "gpio35", "gpio43", "gpio44";
+				function = "bt";
+
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			fm {
+				pins = "gpio41", "gpio42";
+				function = "fm";
+
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+		};
 	};
 
 	sdhci@f9824900 {
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 9a84eb0cbbe6..4b161b809dd5 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
+#include <dt-bindings/interconnect/qcom,msm8974.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,gcc-msm8974.h>
 #include <dt-bindings/clock/qcom,mmcc-msm8974.h>
@@ -20,17 +21,17 @@
 		#size-cells = <1>;
 		ranges;
 
-		mpss@8000000 {
+		mpss_region: mpss@8000000 {
 			reg = <0x08000000 0x5100000>;
 			no-map;
 		};
 
-		mba@d100000 {
+		mba_region: mba@d100000 {
 			reg = <0x0d100000 0x100000>;
 			no-map;
 		};
 
-		reserved@d200000 {
+		wcnss_region: wcnss@d200000 {
 			reg = <0x0d200000 0xa00000>;
 			no-map;
 		};
@@ -61,8 +62,11 @@
 		};
 
 		rmtfs@fd80000 {
+			compatible = "qcom,rmtfs-mem";
 			reg = <0x0fd80000 0x180000>;
 			no-map;
+
+			qcom,client-id = <1>;
 		};
 	};
 
@@ -356,6 +360,15 @@
 
 		qcom,smem-states = <&adsp_smp2p_out 0>;
 		qcom,smem-state-names = "stop";
+
+		smd-edge {
+			interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
+
+			qcom,ipc = <&apcs 8 8>;
+			qcom,smd-edge = <1>;
+
+			label = "lpass";
+		};
 	};
 
 	smem {
@@ -795,6 +808,119 @@
 			clock-names = "core";
 		};
 
+		remoteproc@fc880000 {
+			compatible = "qcom,msm8974-mss-pil";
+			reg = <0xfc880000 0x100>, <0xfc820000 0x020>;
+			reg-names = "qdsp6", "rmb";
+
+			interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
+
+			clocks = <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
+				 <&gcc GCC_MSS_CFG_AHB_CLK>,
+				 <&gcc GCC_BOOT_ROM_AHB_CLK>,
+				 <&xo_board>;
+			clock-names = "iface", "bus", "mem", "xo";
+
+			resets = <&gcc GCC_MSS_RESTART>;
+			reset-names = "mss_restart";
+
+			cx-supply = <&pm8841_s2>;
+			mss-supply = <&pm8841_s3>;
+			mx-supply = <&pm8841_s1>;
+			pll-supply = <&pm8941_l12>;
+
+			qcom,halt-regs = <&tcsr_mutex_block 0x1180 0x1200 0x1280>;
+
+			qcom,smem-states = <&modem_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			mba {
+				memory-region = <&mba_region>;
+			};
+
+			mpss {
+				memory-region = <&mpss_region>;
+			};
+
+			smd-edge {
+				interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
+
+				qcom,ipc = <&apcs 8 12>;
+				qcom,smd-edge = <0>;
+
+				label = "modem";
+			};
+		};
+
+		pronto: remoteproc@fb21b000 {
+			compatible = "qcom,pronto-v2-pil", "qcom,pronto";
+			reg = <0xfb204000 0x2000>, <0xfb202000 0x1000>, <0xfb21b000 0x3000>;
+			reg-names = "ccu", "dxe", "pmu";
+
+			memory-region = <&wcnss_region>;
+
+			interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
+
+			vddpx-supply = <&pm8941_s3>;
+
+			qcom,smem-states = <&wcnss_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			iris {
+				compatible = "qcom,wcn3680";
+
+				clocks = <&rpmcc RPM_SMD_CXO_A2>;
+				clock-names = "xo";
+
+				vddxo-supply = <&pm8941_l6>;
+				vddrfa-supply = <&pm8941_l11>;
+				vddpa-supply = <&pm8941_l19>;
+				vdddig-supply = <&pm8941_s3>;
+			};
+
+			smd-edge {
+				interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;
+
+				qcom,ipc = <&apcs 8 17>;
+				qcom,smd-edge = <6>;
+
+				wcnss {
+					compatible = "qcom,wcnss";
+					qcom,smd-channels = "WCNSS_CTRL";
+					status = "disabled";
+
+					qcom,mmio = <&pronto>;
+
+					bt {
+						compatible = "qcom,wcnss-bt";
+					};
+
+					wifi {
+						compatible = "qcom,wcnss-wlan";
+
+						interrupts = <GIC_SPI 145 IRQ_TYPE_EDGE_RISING>,
+							     <GIC_SPI 146 IRQ_TYPE_EDGE_RISING>;
+						interrupt-names = "tx", "rx";
+
+						qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
+						qcom,smem-state-names = "tx-enable", "tx-rings-empty";
+					};
+				};
+			};
+		};
+
 		msmgpio: pinctrl@fd510000 {
 			compatible = "qcom,msm8974-pinctrl";
 			reg = <0xfd510000 0x4000>;
@@ -1179,6 +1305,79 @@
 			};
 		};
 
+		ocmem@fdd00000 {
+			compatible = "qcom,msm8974-ocmem";
+			reg = <0xfdd00000 0x2000>,
+			      <0xfec00000 0x180000>;
+			reg-names = "ctrl",
+			            "mem";
+			clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
+			         <&mmcc OCMEMCX_OCMEMNOC_CLK>;
+			clock-names = "core",
+			              "iface";
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			gmu_sram: gmu-sram@0 {
+				reg = <0x0 0x100000>;
+			};
+		};
+
+		bimc: interconnect@fc380000 {
+			reg = <0xfc380000 0x6a000>;
+			compatible = "qcom,msm8974-bimc";
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
+			         <&rpmcc RPM_SMD_BIMC_A_CLK>;
+		};
+
+		snoc: interconnect@fc460000 {
+			reg = <0xfc460000 0x4000>;
+			compatible = "qcom,msm8974-snoc";
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
+			         <&rpmcc RPM_SMD_SNOC_A_CLK>;
+		};
+
+		pnoc: interconnect@fc468000 {
+			reg = <0xfc468000 0x4000>;
+			compatible = "qcom,msm8974-pnoc";
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_PNOC_CLK>,
+			         <&rpmcc RPM_SMD_PNOC_A_CLK>;
+		};
+
+		ocmemnoc: interconnect@fc470000 {
+			reg = <0xfc470000 0x4000>;
+			compatible = "qcom,msm8974-ocmemnoc";
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
+			         <&rpmcc RPM_SMD_OCMEMGX_A_CLK>;
+		};
+
+		mmssnoc: interconnect@fc478000 {
+			reg = <0xfc478000 0x4000>;
+			compatible = "qcom,msm8974-mmssnoc";
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&mmcc MMSS_S0_AXI_CLK>,
+			         <&mmcc MMSS_S0_AXI_CLK>;
+		};
+
+		cnoc: interconnect@fc480000 {
+			reg = <0xfc480000 0x4000>;
+			compatible = "qcom,msm8974-cnoc";
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
+			         <&rpmcc RPM_SMD_CNOC_A_CLK>;
+		};
+
 		mdss: mdss@fd900000 {
 			status = "disabled";
 
@@ -1225,6 +1424,9 @@
 				              "core",
 				              "vsync";
 
+				interconnects = <&mmssnoc MNOC_MAS_MDP_PORT0 &bimc BIMC_SLV_EBI_CH0>;
+				interconnect-names = "mdp0-mem";
+
 				ports {
 					#address-cells = <1>;
 					#size-cells = <0>;
@@ -1325,20 +1527,6 @@
 	smd {
 		compatible = "qcom,smd";
 
-		adsp {
-			interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
-
-			qcom,ipc = <&apcs 8 8>;
-			qcom,smd-edge = <1>;
-		};
-
-		modem {
-			interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
-
-			qcom,ipc = <&apcs 8 12>;
-			qcom,smd-edge = <0>;
-		};
-
 		rpm {
 			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
 			qcom,ipc = <&apcs 8 0>;
diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi
index d03dcd919d6f..75b2796ebfca 100644
--- a/arch/arm/boot/dts/r7s72100.dtsi
+++ b/arch/arm/boot/dts/r7s72100.dtsi
@@ -313,9 +313,9 @@
 		mmcif: mmc@e804c800 {
 			compatible = "renesas,mmcif-r7s72100", "renesas,sh-mmcif";
 			reg = <0xe804c800 0x80>;
-			interrupts = <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&mstp8_clks R7S72100_CLK_MMCIF>;
 			power-domains = <&cpg_clocks>;
 			reg-io-width = <4>;
@@ -326,9 +326,9 @@
 		sdhi0: sd@e804e000 {
 			compatible = "renesas,sdhi-r7s72100";
 			reg = <0xe804e000 0x100>;
-			interrupts = <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&mstp12_clks R7S72100_CLK_SDHI00>,
 				 <&mstp12_clks R7S72100_CLK_SDHI01>;
@@ -342,9 +342,9 @@
 		sdhi1: sd@e804e800 {
 			compatible = "renesas,sdhi-r7s72100";
 			reg = <0xe804e800 0x100>;
-			interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&mstp12_clks R7S72100_CLK_SDHI10>,
 				 <&mstp12_clks R7S72100_CLK_SDHI11>;
diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi
index dd865f3c2eda..a5cd31229fbd 100644
--- a/arch/arm/boot/dts/r8a73a4.dtsi
+++ b/arch/arm/boot/dts/r8a73a4.dtsi
@@ -84,27 +84,27 @@
 		dma0: dma-controller@e6700020 {
 			compatible = "renesas,shdma-r8a73a4";
 			reg = <0 0xe6700020 0 0x89e0>;
-			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
-					GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
-					GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
-					GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
-					GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
-					GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
-					GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
-					GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
-					GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
-					GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
-					GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
-					GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
-					GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
-					GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
-					GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
-					GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH
-					GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH
-					GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
-					GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
-					GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
-					GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7",
diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
index 758360a2edc3..d960c2767f61 100644
--- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
+++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
@@ -60,8 +60,7 @@
 
 		enable-gpio = <&pfc 74 GPIO_ACTIVE_HIGH>;
 		gpios = <&pfc 17 GPIO_ACTIVE_HIGH>;
-		states = <3300000 0
-			  1800000 1>;
+		states = <3300000 0>, <1800000 1>;
 
 		enable-active-high;
 	};
diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi
index 12ffe73bf2bc..ebc1ff64f530 100644
--- a/arch/arm/boot/dts/r8a7740.dtsi
+++ b/arch/arm/boot/dts/r8a7740.dtsi
@@ -102,14 +102,14 @@
 			<0xe6900020 1>,
 			<0xe6900040 1>,
 			<0xe6900060 1>;
-		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
 		power-domains = <&pd_a4s>;
 	};
@@ -124,14 +124,14 @@
 			<0xe6900024 1>,
 			<0xe6900044 1>,
 			<0xe6900064 1>;
-		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
 		power-domains = <&pd_a4s>;
 	};
@@ -146,14 +146,14 @@
 			<0xe6900028 1>,
 			<0xe6900048 1>,
 			<0xe6900068 1>;
-		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
 		power-domains = <&pd_a4s>;
 	};
@@ -168,14 +168,14 @@
 			<0xe690002c 1>,
 			<0xe690004c 1>,
 			<0xe690006c 1>;
-		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
 		power-domains = <&pd_a4s>;
 	};
@@ -198,10 +198,10 @@
 		#size-cells = <0>;
 		compatible = "renesas,iic-r8a7740", "renesas,rmobile-iic";
 		reg = <0xfff20000 0x425>;
-		interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7740_CLK_IIC0>;
 		power-domains = <&pd_a4r>;
 		status = "disabled";
@@ -212,10 +212,10 @@
 		#size-cells = <0>;
 		compatible = "renesas,iic-r8a7740", "renesas,rmobile-iic";
 		reg = <0xe6c20000 0x425>;
-		interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7740_CLK_IIC1>;
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
@@ -342,8 +342,8 @@
 	mmcif0: mmc@e6bd0000 {
 		compatible = "renesas,mmcif-r8a7740", "renesas,sh-mmcif";
 		reg = <0xe6bd0000 0x100>;
-		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7740_CLK_MMC>;
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
@@ -352,9 +352,9 @@
 	sdhi0: sd@e6850000 {
 		compatible = "renesas,sdhi-r8a7740";
 		reg = <0xe6850000 0x100>;
-		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7740_CLK_SDHI0>;
 		power-domains = <&pd_a3sp>;
 		cap-sd-highspeed;
@@ -365,9 +365,9 @@
 	sdhi1: sd@e6860000 {
 		compatible = "renesas,sdhi-r8a7740";
 		reg = <0xe6860000 0x100>;
-		interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7740_CLK_SDHI1>;
 		power-domains = <&pd_a3sp>;
 		cap-sd-highspeed;
@@ -378,9 +378,9 @@
 	sdhi2: sd@e6870000 {
 		compatible = "renesas,sdhi-r8a7740";
 		reg = <0xe6870000 0x100>;
-		interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp4_clks R8A7740_CLK_SDHI2>;
 		power-domains = <&pd_a3sp>;
 		cap-sd-highspeed;
diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi
index de981d629bdd..1cd19a569bd0 100644
--- a/arch/arm/boot/dts/r8a7743.dtsi
+++ b/arch/arm/boot/dts/r8a7743.dtsi
@@ -399,6 +399,9 @@
 		icram0:	sram@e63a0000 {
 			compatible = "mmio-sram";
 			reg = <0 0xe63a0000 0 0x12000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xe63a0000 0x12000>;
 		};
 
 		icram1:	sram@e63c0000 {
@@ -417,6 +420,9 @@
 		icram2:	sram@e6300000 {
 			compatible = "mmio-sram";
 			reg = <0 0xe6300000 0 0x40000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xe6300000 0x40000>;
 		};
 
 		/* The memory map in the User's Manual maps the cores to
@@ -600,8 +606,8 @@
 			compatible = "renesas,r8a7743-usb-dmac",
 				     "renesas,usb-dmac";
 			reg = <0 0xe65a0000 0 0x100>;
-			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "ch0", "ch1";
 			clocks = <&cpg CPG_MOD 330>;
 			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
@@ -614,8 +620,8 @@
 			compatible = "renesas,r8a7743-usb-dmac",
 				     "renesas,usb-dmac";
 			reg = <0 0xe65b0000 0 0x100>;
-			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "ch0", "ch1";
 			clocks = <&cpg CPG_MOD 331>;
 			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
@@ -628,22 +634,22 @@
 			compatible = "renesas,dmac-r8a7743",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe6700000 0 0x20000>;
-			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					  "ch0", "ch1", "ch2", "ch3",
 					  "ch4", "ch5", "ch6", "ch7",
@@ -661,22 +667,22 @@
 			compatible = "renesas,dmac-r8a7743",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe6720000 0 0x20000>;
-			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					  "ch0", "ch1", "ch2", "ch3",
 					  "ch4", "ch5", "ch6", "ch7",
@@ -1366,20 +1372,20 @@
 			compatible = "renesas,dmac-r8a7743",
 				     "renesas,rcar-dmac";
 			reg = <0 0xec700000 0 0x10000>;
-			interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					  "ch0", "ch1", "ch2", "ch3",
 					  "ch4", "ch5", "ch6", "ch7",
@@ -1397,20 +1403,20 @@
 			compatible = "renesas,dmac-r8a7743",
 				     "renesas,rcar-dmac";
 			reg = <0 0xec720000 0 0x10000>;
-			interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					  "ch0", "ch1", "ch2", "ch3",
 					  "ch4", "ch5", "ch6", "ch7",
@@ -1461,10 +1467,10 @@
 			#size-cells = <2>;
 			#interrupt-cells = <1>;
 			ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>;
-			interrupt-map-mask = <0xff00 0 0 0x7>;
-			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH
-					 0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH
-					 0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map-mask = <0xf800 0 0 0x7>;
+			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+					<0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+					<0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 
 			usb@1,0 {
 				reg = <0x800 0 0 0 0>;
@@ -1496,10 +1502,10 @@
 			#size-cells = <2>;
 			#interrupt-cells = <1>;
 			ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>;
-			interrupt-map-mask = <0xff00 0 0 0x7>;
-			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
-					 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
-					 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map-mask = <0xf800 0 0 0x7>;
+			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+					<0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+					<0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
 
 			usb@1,0 {
 				reg = <0x10800 0 0 0 0>;
@@ -1611,13 +1617,13 @@
 			#size-cells = <2>;
 			bus-range = <0x00 0xff>;
 			device_type = "pci";
-			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
-				  0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
-				  0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
-				  0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+				 <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+				 <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
 			/* Map all possible DDR as inbound ranges */
-			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000
-				      0x43000000 2 0x00000000 2 0x00000000 1 0x00000000>;
+			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>,
+				     <0x43000000 2 0x00000000 2 0x00000000 1 0x00000000>;
 			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/r8a7744.dtsi b/arch/arm/boot/dts/r8a7744.dtsi
index fa74a262107b..1c82dd0abd76 100644
--- a/arch/arm/boot/dts/r8a7744.dtsi
+++ b/arch/arm/boot/dts/r8a7744.dtsi
@@ -399,6 +399,9 @@
 		icram0:	sram@e63a0000 {
 			compatible = "mmio-sram";
 			reg = <0 0xe63a0000 0 0x12000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xe63a0000 0x12000>;
 		};
 
 		icram1:	sram@e63c0000 {
@@ -417,6 +420,9 @@
 		icram2:	sram@e6300000 {
 			compatible = "mmio-sram";
 			reg = <0 0xe6300000 0 0x40000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xe6300000 0x40000>;
 		};
 
 		/* The memory map in the User's Manual maps the cores to
@@ -600,8 +606,8 @@
 			compatible = "renesas,r8a7744-usb-dmac",
 				     "renesas,usb-dmac";
 			reg = <0 0xe65a0000 0 0x100>;
-			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "ch0", "ch1";
 			clocks = <&cpg CPG_MOD 330>;
 			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
@@ -614,8 +620,8 @@
 			compatible = "renesas,r8a7744-usb-dmac",
 				     "renesas,usb-dmac";
 			reg = <0 0xe65b0000 0 0x100>;
-			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "ch0", "ch1";
 			clocks = <&cpg CPG_MOD 331>;
 			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
@@ -628,22 +634,22 @@
 			compatible = "renesas,dmac-r8a7744",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe6700000 0 0x20000>;
-			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					  "ch0", "ch1", "ch2", "ch3",
 					  "ch4", "ch5", "ch6", "ch7",
@@ -661,22 +667,22 @@
 			compatible = "renesas,dmac-r8a7744",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe6720000 0 0x20000>;
-			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					  "ch0", "ch1", "ch2", "ch3",
 					  "ch4", "ch5", "ch6", "ch7",
@@ -1366,20 +1372,20 @@
 			compatible = "renesas,dmac-r8a7744",
 				     "renesas,rcar-dmac";
 			reg = <0 0xec700000 0 0x10000>;
-			interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					  "ch0", "ch1", "ch2", "ch3",
 					  "ch4", "ch5", "ch6", "ch7",
@@ -1397,20 +1403,20 @@
 			compatible = "renesas,dmac-r8a7744",
 				     "renesas,rcar-dmac";
 			reg = <0 0xec720000 0 0x10000>;
-			interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					  "ch0", "ch1", "ch2", "ch3",
 					  "ch4", "ch5", "ch6", "ch7",
@@ -1461,10 +1467,10 @@
 			#size-cells = <2>;
 			#interrupt-cells = <1>;
 			ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>;
-			interrupt-map-mask = <0xff00 0 0 0x7>;
-			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH
-					 0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH
-					 0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map-mask = <0xf800 0 0 0x7>;
+			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+					<0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+					<0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 
 			usb@1,0 {
 				reg = <0x800 0 0 0 0>;
@@ -1496,10 +1502,10 @@
 			#size-cells = <2>;
 			#interrupt-cells = <1>;
 			ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>;
-			interrupt-map-mask = <0xff00 0 0 0x7>;
-			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
-					 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
-					 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map-mask = <0xf800 0 0 0x7>;
+			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+					<0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+					<0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
 
 			usb@1,0 {
 				reg = <0x10800 0 0 0 0>;
@@ -1597,13 +1603,13 @@
 			#size-cells = <2>;
 			bus-range = <0x00 0xff>;
 			device_type = "pci";
-			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
-				  0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
-				  0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
-				  0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+				 <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+				 <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
 			/* Map all possible DDR as inbound ranges */
-			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000
-				      0x43000000 2 0x00000000 2 0x00000000 1 0x00000000>;
+			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>,
+				     <0x43000000 2 0x00000000 2 0x00000000 1 0x00000000>;
 			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts
index ce6603b0994b..58d369ad8279 100644
--- a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts
+++ b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts
@@ -76,8 +76,7 @@
 
 		gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
 		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
+		states = <3300000 1>, <1800000 0>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi
index c53f7ff20695..3f88a7e34af2 100644
--- a/arch/arm/boot/dts/r8a7745.dtsi
+++ b/arch/arm/boot/dts/r8a7745.dtsi
@@ -363,6 +363,9 @@
 		icram0:	sram@e63a0000 {
 			compatible = "mmio-sram";
 			reg = <0 0xe63a0000 0 0x12000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xe63a0000 0x12000>;
 		};
 
 		icram1:	sram@e63c0000 {
@@ -381,6 +384,9 @@
 		icram2:	sram@e6300000 {
 			compatible = "mmio-sram";
 			reg = <0 0xe6300000 0 0x40000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xe6300000 0x40000>;
 		};
 		i2c0: i2c@e6508000 {
 			#address-cells = <1>;
@@ -543,8 +549,8 @@
 			compatible = "renesas,r8a7745-usb-dmac",
 				     "renesas,usb-dmac";
 			reg = <0 0xe65a0000 0 0x100>;
-			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "ch0", "ch1";
 			clocks = <&cpg CPG_MOD 330>;
 			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
@@ -557,8 +563,8 @@
 			compatible = "renesas,r8a7745-usb-dmac",
 				     "renesas,usb-dmac";
 			reg = <0 0xe65b0000 0 0x100>;
-			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "ch0", "ch1";
 			clocks = <&cpg CPG_MOD 331>;
 			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
@@ -571,22 +577,22 @@
 			compatible = "renesas,dmac-r8a7745",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe6700000 0 0x20000>;
-			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					  "ch0", "ch1", "ch2", "ch3",
 					  "ch4", "ch5", "ch6", "ch7",
@@ -604,22 +610,22 @@
 			compatible = "renesas,dmac-r8a7745",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe6720000 0 0x20000>;
-			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					  "ch0", "ch1", "ch2", "ch3",
 					  "ch4", "ch5", "ch6", "ch7",
@@ -1293,20 +1299,20 @@
 			compatible = "renesas,dmac-r8a7745",
 				     "renesas,rcar-dmac";
 			reg = <0 0xec700000 0 0x10000>;
-			interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					  "ch0", "ch1", "ch2", "ch3",
 					  "ch4", "ch5", "ch6", "ch7",
@@ -1337,10 +1343,10 @@
 			#size-cells = <2>;
 			#interrupt-cells = <1>;
 			ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>;
-			interrupt-map-mask = <0xff00 0 0 0x7>;
-			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH
-					 0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH
-					 0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map-mask = <0xf800 0 0 0x7>;
+			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+					<0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+					<0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 
 			usb@1,0 {
 				reg = <0x800 0 0 0 0>;
@@ -1372,10 +1378,10 @@
 			#size-cells = <2>;
 			#interrupt-cells = <1>;
 			ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>;
-			interrupt-map-mask = <0xff00 0 0 0x7>;
-			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
-					 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
-					 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map-mask = <0xf800 0 0 0x7>;
+			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+					<0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+					<0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
 
 			usb@1,0 {
 				reg = <0x10800 0 0 0 0>;
diff --git a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
index 450efe923008..8ac61b50aec0 100644
--- a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
+++ b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
@@ -65,8 +65,7 @@
 
 		gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>;
 		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
+		states = <3300000 1>, <1800000 0>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/r8a77470.dtsi b/arch/arm/boot/dts/r8a77470.dtsi
index 51806c7f486a..6efcef1670e1 100644
--- a/arch/arm/boot/dts/r8a77470.dtsi
+++ b/arch/arm/boot/dts/r8a77470.dtsi
@@ -242,6 +242,9 @@
 		icram0:	sram@e63a0000 {
 			compatible = "mmio-sram";
 			reg = <0 0xe63a0000 0 0x12000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xe63a0000 0x12000>;
 		};
 
 		icram1:	sram@e63c0000 {
@@ -260,6 +263,9 @@
 		icram2:	sram@e6300000 {
 			compatible = "mmio-sram";
 			reg = <0 0xe6300000 0 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xe6300000 0x20000>;
 		};
 
 		i2c0: i2c@e6508000 {
@@ -407,8 +413,8 @@
 			compatible = "renesas,r8a77470-usb-dmac",
 				     "renesas,usb-dmac";
 			reg = <0 0xe65a0000 0 0x100>;
-			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "ch0", "ch1";
 			clocks = <&cpg CPG_MOD 330>;
 			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
@@ -421,8 +427,8 @@
 			compatible = "renesas,r8a77470-usb-dmac",
 				     "renesas,usb-dmac";
 			reg = <0 0xe65b0000 0 0x100>;
-			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "ch0", "ch1";
 			clocks = <&cpg CPG_MOD 331>;
 			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
@@ -435,8 +441,8 @@
 			compatible = "renesas,r8a77470-usb-dmac",
 				     "renesas,usb-dmac";
 			reg = <0 0xe65a8000 0 0x100>;
-			interrupts = <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "ch0", "ch1";
 			clocks = <&cpg CPG_MOD 326>;
 			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
@@ -449,8 +455,8 @@
 			compatible = "renesas,r8a77470-usb-dmac",
 				     "renesas,usb-dmac";
 			reg = <0 0xe65b8000 0 0x100>;
-			interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "ch0", "ch1";
 			clocks = <&cpg CPG_MOD 327>;
 			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
@@ -463,22 +469,22 @@
 			compatible = "renesas,dmac-r8a77470",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe6700000 0 0x20000>;
-			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					  "ch0", "ch1", "ch2", "ch3",
 					  "ch4", "ch5", "ch6", "ch7",
@@ -496,22 +502,22 @@
 			compatible = "renesas,dmac-r8a77470",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe6720000 0 0x20000>;
-			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					  "ch0", "ch1", "ch2", "ch3",
 					  "ch4", "ch5", "ch6", "ch7",
diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi
index 10d996d2941f..593c6df90303 100644
--- a/arch/arm/boot/dts/r8a7778.dtsi
+++ b/arch/arm/boot/dts/r8a7778.dtsi
@@ -79,10 +79,10 @@
 			<0xfe780024 4>,
 			<0xfe780044 4>,
 			<0xfe780064 4>;
-		interrupts =   <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH
-				GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH
-				GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH
-				GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
 		sense-bitfield-width = <2>;
 	};
 
@@ -498,14 +498,17 @@
 		audio_clk_a: audio_clk_a {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
+			clock-frequency = <0>;
 		};
 		audio_clk_b: audio_clk_b {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
+			clock-frequency = <0>;
 		};
 		audio_clk_c: audio_clk_c {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
+			clock-frequency = <0>;
 		};
 
 		/* Fixed ratio clocks */
diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts
index c755f0b8fd0d..d2240b89ee52 100644
--- a/arch/arm/boot/dts/r8a7779-marzen.dts
+++ b/arch/arm/boot/dts/r8a7779-marzen.dts
@@ -48,8 +48,7 @@
 
 		gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
 		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
+		states = <3300000 1>, <1800000 0>;
 	};
 
 	ethernet@18000000 {
diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
index ebf5b7cfe215..beb9885e6ffc 100644
--- a/arch/arm/boot/dts/r8a7779.dtsi
+++ b/arch/arm/boot/dts/r8a7779.dtsi
@@ -68,6 +68,14 @@
 		      <0xf0000100 0x100>;
 	};
 
+	timer@f0000200 {
+		compatible = "arm,cortex-a9-global-timer";
+		reg = <0xf0000200 0x100>;
+		interrupts = <GIC_PPI 11
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+		clocks = <&cpg_clocks R8A7779_CLK_ZS>;
+	};
+
 	timer@f0000600 {
 		compatible = "arm,cortex-a9-twd-timer";
 		reg = <0xf0000600 0x20>;
@@ -164,10 +172,10 @@
 			<0xfe780044 4>,
 			<0xfe780064 4>,
 			<0xfe780000 4>;
-		interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
 		sense-bitfield-width = <2>;
 	};
 
diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index 6ec2cf7eb354..097fd9317c6e 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -150,8 +150,7 @@
 
 		gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
 		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
+		states = <3300000 1>, <1800000 0>;
 	};
 
 	vcc_sdhi2: regulator-vcc-sdhi2 {
@@ -174,8 +173,7 @@
 
 		gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>;
 		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
+		states = <3300000 1>, <1800000 0>;
 	};
 
 	audio_clock: audio_clock {
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 5a2747758f67..334ba19769b9 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -487,6 +487,9 @@
 		icram0:	sram@e63a0000 {
 			compatible = "mmio-sram";
 			reg = <0 0xe63a0000 0 0x12000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xe63a0000 0x12000>;
 		};
 
 		icram1:	sram@e63c0000 {
@@ -669,8 +672,8 @@
 			compatible = "renesas,r8a7790-usb-dmac",
 				     "renesas,usb-dmac";
 			reg = <0 0xe65a0000 0 0x100>;
-			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "ch0", "ch1";
 			clocks = <&cpg CPG_MOD 330>;
 			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
@@ -683,8 +686,8 @@
 			compatible = "renesas,r8a7790-usb-dmac",
 				     "renesas,usb-dmac";
 			reg = <0 0xe65b0000 0 0x100>;
-			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "ch0", "ch1";
 			clocks = <&cpg CPG_MOD 331>;
 			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
@@ -697,22 +700,22 @@
 			compatible = "renesas,dmac-r8a7790",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe6700000 0 0x20000>;
-			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					  "ch0", "ch1", "ch2", "ch3",
 					  "ch4", "ch5", "ch6", "ch7",
@@ -730,22 +733,22 @@
 			compatible = "renesas,dmac-r8a7790",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe6720000 0 0x20000>;
-			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					  "ch0", "ch1", "ch2", "ch3",
 					  "ch4", "ch5", "ch6", "ch7",
@@ -1300,20 +1303,20 @@
 			compatible = "renesas,dmac-r8a7790",
 				     "renesas,rcar-dmac";
 			reg = <0 0xec700000 0 0x10000>;
-			interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					  "ch0", "ch1", "ch2", "ch3",
 					  "ch4", "ch5", "ch6", "ch7",
@@ -1331,20 +1334,20 @@
 			compatible = "renesas,dmac-r8a7790",
 				     "renesas,rcar-dmac";
 			reg = <0 0xec720000 0 0x10000>;
-			interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					  "ch0", "ch1", "ch2", "ch3",
 					  "ch4", "ch5", "ch6", "ch7",
@@ -1388,10 +1391,10 @@
 			#size-cells = <2>;
 			#interrupt-cells = <1>;
 			ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>;
-			interrupt-map-mask = <0xff00 0 0 0x7>;
-			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH
-					 0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH
-					 0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map-mask = <0xf800 0 0 0x7>;
+			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+					<0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+					<0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 
 			usb@1,0 {
 				reg = <0x800 0 0 0 0>;
@@ -1423,10 +1426,10 @@
 			#size-cells = <2>;
 			#interrupt-cells = <1>;
 			ranges = <0x02000000 0 0xee0a0000 0 0xee0a0000 0 0x00010000>;
-			interrupt-map-mask = <0xff00 0 0 0x7>;
-			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH
-					 0x0800 0 0 1 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH
-					 0x1000 0 0 2 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map-mask = <0xf800 0 0 0x7>;
+			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+					<0x0800 0 0 1 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+					<0x1000 0 0 2 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		pci2: pci@ee0d0000 {
@@ -1446,10 +1449,10 @@
 			#size-cells = <2>;
 			#interrupt-cells = <1>;
 			ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>;
-			interrupt-map-mask = <0xff00 0 0 0x7>;
-			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
-					 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
-					 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map-mask = <0xf800 0 0 0x7>;
+			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+					<0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+					<0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
 
 			usb@1,0 {
 				reg = <0x20800 0 0 0 0>;
@@ -1614,13 +1617,13 @@
 			#size-cells = <2>;
 			bus-range = <0x00 0xff>;
 			device_type = "pci";
-			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
-				  0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
-				  0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
-				  0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+				 <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+				 <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
 			/* Map all possible DDR as inbound ranges */
-			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000
-				      0x43000000 1 0x80000000 1 0x80000000 0 0x80000000>;
+			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>,
+				     <0x43000000 1 0x80000000 1 0x80000000 0 0x80000000>;
 			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index af6bd8fcd5a4..2b096d5e06fb 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -193,8 +193,7 @@
 
 		gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
 		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
+		states = <3300000 1>, <1800000 0>;
 	};
 
 	vcc_sdhi1: regulator-vcc-sdhi1 {
@@ -217,8 +216,7 @@
 
 		gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
 		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
+		states = <3300000 1>, <1800000 0>;
 	};
 
 	vcc_sdhi2: regulator-vcc-sdhi2 {
@@ -241,8 +239,7 @@
 
 		gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
 		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
+		states = <3300000 1>, <1800000 0>;
 	};
 
 	audio_clock: audio_clock {
diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts
index d6cf16aac14d..f9ece7ab2010 100644
--- a/arch/arm/boot/dts/r8a7791-porter.dts
+++ b/arch/arm/boot/dts/r8a7791-porter.dts
@@ -63,8 +63,7 @@
 
 		gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
 		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
+		states = <3300000 1>, <1800000 0>;
 	};
 
 	vcc_sdhi2: regulator-vcc-sdhi2 {
@@ -85,8 +84,7 @@
 
 		gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
 		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
+		states = <3300000 1>, <1800000 0>;
 	};
 
 	hdmi-out {
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 6f875502453c..59a55e87fcc6 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -420,6 +420,9 @@
 		icram0:	sram@e63a0000 {
 			compatible = "mmio-sram";
 			reg = <0 0xe63a0000 0 0x12000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xe63a0000 0x12000>;
 		};
 
 		icram1:	sram@e63c0000 {
@@ -618,8 +621,8 @@
 			compatible = "renesas,r8a7791-usb-dmac",
 				     "renesas,usb-dmac";
 			reg = <0 0xe65a0000 0 0x100>;
-			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "ch0", "ch1";
 			clocks = <&cpg CPG_MOD 330>;
 			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
@@ -632,8 +635,8 @@
 			compatible = "renesas,r8a7791-usb-dmac",
 				     "renesas,usb-dmac";
 			reg = <0 0xe65b0000 0 0x100>;
-			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "ch0", "ch1";
 			clocks = <&cpg CPG_MOD 331>;
 			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
@@ -646,22 +649,22 @@
 			compatible = "renesas,dmac-r8a7791",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe6700000 0 0x20000>;
-			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					  "ch0", "ch1", "ch2", "ch3",
 					  "ch4", "ch5", "ch6", "ch7",
@@ -679,22 +682,22 @@
 			compatible = "renesas,dmac-r8a7791",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe6720000 0 0x20000>;
-			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					  "ch0", "ch1", "ch2", "ch3",
 					  "ch4", "ch5", "ch6", "ch7",
@@ -1338,20 +1341,20 @@
 			compatible = "renesas,dmac-r8a7791",
 				     "renesas,rcar-dmac";
 			reg = <0 0xec700000 0 0x10000>;
-			interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					  "ch0", "ch1", "ch2", "ch3",
 					  "ch4", "ch5", "ch6", "ch7",
@@ -1369,20 +1372,20 @@
 			compatible = "renesas,dmac-r8a7791",
 				     "renesas,rcar-dmac";
 			reg = <0 0xec720000 0 0x10000>;
-			interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					  "ch0", "ch1", "ch2", "ch3",
 					  "ch4", "ch5", "ch6", "ch7",
@@ -1426,10 +1429,10 @@
 			#size-cells = <2>;
 			#interrupt-cells = <1>;
 			ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>;
-			interrupt-map-mask = <0xff00 0 0 0x7>;
-			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH
-					 0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH
-					 0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map-mask = <0xf800 0 0 0x7>;
+			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+					<0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+					<0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 
 			usb@1,0 {
 				reg = <0x800 0 0 0 0>;
@@ -1461,10 +1464,10 @@
 			#size-cells = <2>;
 			#interrupt-cells = <1>;
 			ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>;
-			interrupt-map-mask = <0xff00 0 0 0x7>;
-			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
-					 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
-					 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map-mask = <0xf800 0 0 0x7>;
+			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+					<0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+					<0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
 
 			usb@1,0 {
 				reg = <0x10800 0 0 0 0>;
@@ -1598,13 +1601,13 @@
 			#size-cells = <2>;
 			bus-range = <0x00 0xff>;
 			device_type = "pci";
-			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
-				  0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
-				  0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
-				  0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+				 <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+				 <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
 			/* Map all possible DDR as inbound ranges */
-			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000
-				      0x43000000 2 0x00000000 2 0x00000000 1 0x00000000>;
+			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>,
+				     <0x43000000 2 0x00000000 2 0x00000000 1 0x00000000>;
 			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi
index c4ea2d676030..39af16caa2ae 100644
--- a/arch/arm/boot/dts/r8a7792.dtsi
+++ b/arch/arm/boot/dts/r8a7792.dtsi
@@ -345,6 +345,9 @@
 		icram0:	sram@e63a0000 {
 			compatible = "mmio-sram";
 			reg = <0 0xe63a0000 0 0x12000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xe63a0000 0x12000>;
 		};
 
 		icram1:	sram@e63c0000 {
@@ -466,22 +469,22 @@
 			compatible = "renesas,dmac-r8a7792",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe6700000 0 0x20000>;
-			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					  "ch0", "ch1", "ch2", "ch3",
 					  "ch4", "ch5", "ch6", "ch7",
@@ -499,22 +502,22 @@
 			compatible = "renesas,dmac-r8a7792",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe6720000 0 0x20000>;
-			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					  "ch0", "ch1", "ch2", "ch3",
 					  "ch4", "ch5", "ch6", "ch7",
diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts
index 48fbeb6340fd..22ca7cd1e7d2 100644
--- a/arch/arm/boot/dts/r8a7793-gose.dts
+++ b/arch/arm/boot/dts/r8a7793-gose.dts
@@ -179,8 +179,7 @@
 
 		gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
 		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
+		states = <3300000 1>, <1800000 0>;
 	};
 
 	vcc_sdhi1: regulator-vcc-sdhi1 {
@@ -203,8 +202,7 @@
 
 		gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
 		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
+		states = <3300000 1>, <1800000 0>;
 	};
 
 	vcc_sdhi2: regulator-vcc-sdhi2 {
@@ -227,8 +225,7 @@
 
 		gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
 		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
+		states = <3300000 1>, <1800000 0>;
 	};
 
 	audio_clock: audio_clock {
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index bf05110fac4e..eef035c4d983 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -406,6 +406,9 @@
 		icram0:	sram@e63a0000 {
 			compatible = "mmio-sram";
 			reg = <0 0xe63a0000 0 0x12000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xe63a0000 0x12000>;
 		};
 
 		icram1:	sram@e63c0000 {
@@ -565,22 +568,22 @@
 			compatible = "renesas,dmac-r8a7793",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe6700000 0 0x20000>;
-			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					  "ch0", "ch1", "ch2", "ch3",
 					  "ch4", "ch5", "ch6", "ch7",
@@ -598,22 +601,22 @@
 			compatible = "renesas,dmac-r8a7793",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe6720000 0 0x20000>;
-			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					  "ch0", "ch1", "ch2", "ch3",
 					  "ch4", "ch5", "ch6", "ch7",
@@ -1166,20 +1169,20 @@
 			compatible = "renesas,dmac-r8a7793",
 				     "renesas,rcar-dmac";
 			reg = <0 0xec700000 0 0x10000>;
-			interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					  "ch0", "ch1", "ch2", "ch3",
 					  "ch4", "ch5", "ch6", "ch7",
@@ -1197,20 +1200,20 @@
 			compatible = "renesas,dmac-r8a7793",
 				     "renesas,rcar-dmac";
 			reg = <0 0xec720000 0 0x10000>;
-			interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					  "ch0", "ch1", "ch2", "ch3",
 					  "ch4", "ch5", "ch6", "ch7",
diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts
index 1d22fcdc5d22..f79fce74cd9c 100644
--- a/arch/arm/boot/dts/r8a7794-alt.dts
+++ b/arch/arm/boot/dts/r8a7794-alt.dts
@@ -60,8 +60,7 @@
 
 		gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
 		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
+		states = <3300000 1>, <1800000 0>;
 	};
 
 	vcc_sdhi1: regulator-vcc-sdhi1 {
@@ -84,8 +83,7 @@
 
 		gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
 		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
+		states = <3300000 1>, <1800000 0>;
 	};
 
 	lbsc {
diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts
index b3177aea45d1..2c16ad854300 100644
--- a/arch/arm/boot/dts/r8a7794-silk.dts
+++ b/arch/arm/boot/dts/r8a7794-silk.dts
@@ -126,8 +126,7 @@
 
 		gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
 		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
+		states = <3300000 1>, <1800000 0>;
 	};
 
 	vga-encoder {
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index 8d797d34816e..05ef79c6ed7f 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -351,6 +351,9 @@
 		icram0:	sram@e63a0000 {
 			compatible = "mmio-sram";
 			reg = <0 0xe63a0000 0 0x12000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xe63a0000 0x12000>;
 		};
 
 		icram1:	sram@e63c0000 {
@@ -527,22 +530,22 @@
 			compatible = "renesas,dmac-r8a7794",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe6700000 0 0x20000>;
-			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					  "ch0", "ch1", "ch2", "ch3",
 					  "ch4", "ch5", "ch6", "ch7",
@@ -560,22 +563,22 @@
 			compatible = "renesas,dmac-r8a7794",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe6720000 0 0x20000>;
-			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					  "ch0", "ch1", "ch2", "ch3",
 					  "ch4", "ch5", "ch6", "ch7",
@@ -1132,20 +1135,20 @@
 			compatible = "renesas,dmac-r8a7794",
 				     "renesas,rcar-dmac";
 			reg = <0 0xec700000 0 0x10000>;
-			interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					  "ch0", "ch1", "ch2", "ch3", "ch4",
 					  "ch5", "ch6", "ch7", "ch8", "ch9",
@@ -1176,10 +1179,10 @@
 			#size-cells = <2>;
 			#interrupt-cells = <1>;
 			ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>;
-			interrupt-map-mask = <0xff00 0 0 0x7>;
-			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH
-					 0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH
-					 0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map-mask = <0xf800 0 0 0x7>;
+			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+					<0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+					<0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 
 			usb@1,0 {
 				reg = <0x800 0 0 0 0>;
@@ -1211,10 +1214,10 @@
 			#size-cells = <2>;
 			#interrupt-cells = <1>;
 			ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>;
-			interrupt-map-mask = <0xff00 0 0 0x7>;
-			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
-					 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
-					 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map-mask = <0xf800 0 0 0x7>;
+			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+					<0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+					<0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
 
 			usb@1,0 {
 				reg = <0x10800 0 0 0 0>;
diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi
index c70182c5aeb1..cf36e25195b4 100644
--- a/arch/arm/boot/dts/rk3036.dtsi
+++ b/arch/arm/boot/dts/rk3036.dtsi
@@ -224,7 +224,7 @@
 		status = "disabled";
 	};
 
-	sdmmc: dwmmc@10214000 {
+	sdmmc: mmc@10214000 {
 		compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc";
 		reg = <0x10214000 0x4000>;
 		clock-frequency = <37500000>;
@@ -238,7 +238,7 @@
 		status = "disabled";
 	};
 
-	sdio: dwmmc@10218000 {
+	sdio: mmc@10218000 {
 		compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc";
 		reg = <0x10218000 0x4000>;
 		max-frequency = <37500000>;
@@ -252,7 +252,7 @@
 		status = "disabled";
 	};
 
-	emmc: dwmmc@1021c000 {
+	emmc: mmc@1021c000 {
 		compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc";
 		reg = <0x1021c000 0x4000>;
 		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/rk3188-bqedison2qc.dts b/arch/arm/boot/dts/rk3188-bqedison2qc.dts
index c8b62bbd6a4a..ad1afd403052 100644
--- a/arch/arm/boot/dts/rk3188-bqedison2qc.dts
+++ b/arch/arm/boot/dts/rk3188-bqedison2qc.dts
@@ -466,9 +466,12 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, <&sd1_bus4>;
 	vmmcq-supply = <&vccio_wl>;
+	#address-cells = <1>;
+	#size-cells = <0>;
 	status = "okay";
 
 	brcmf: wifi@1 {
+		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 		interrupt-parent = <&gpio3>;
 		interrupts = <RK_PD2 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi
index 340ed6ccb08f..4e90efdc9630 100644
--- a/arch/arm/boot/dts/rk322x.dtsi
+++ b/arch/arm/boot/dts/rk322x.dtsi
@@ -662,7 +662,7 @@
 		};
 	};
 
-	sdmmc: dwmmc@30000000 {
+	sdmmc: mmc@30000000 {
 		compatible = "rockchip,rk3228-dw-mshc", "rockchip,rk3288-dw-mshc";
 		reg = <0x30000000 0x4000>;
 		interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
@@ -675,7 +675,7 @@
 		status = "disabled";
 	};
 
-	sdio: dwmmc@30010000 {
+	sdio: mmc@30010000 {
 		compatible = "rockchip,rk3228-dw-mshc", "rockchip,rk3288-dw-mshc";
 		reg = <0x30010000 0x4000>;
 		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
@@ -688,7 +688,7 @@
 		status = "disabled";
 	};
 
-	emmc: dwmmc@30020000 {
+	emmc: mmc@30020000 {
 		compatible = "rockchip,rk3228-dw-mshc", "rockchip,rk3288-dw-mshc";
 		reg = <0x30020000 0x4000>;
 		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi
index 2afd686b2033..018802df4c0e 100644
--- a/arch/arm/boot/dts/rk3288-evb.dtsi
+++ b/arch/arm/boot/dts/rk3288-evb.dtsi
@@ -97,7 +97,7 @@
 	};
 
 	panel: panel {
-		compatible = "lg,lp079qx1-sp0v", "simple-panel";
+		compatible = "lg,lp079qx1-sp0v";
 		backlight = <&backlight>;
 		enable-gpios = <&gpio7 RK_PA4 GPIO_ACTIVE_HIGH>;
 		pinctrl-0 = <&lcd_cs>;
diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
index 0aeef23ca3db..312582c1bd37 100644
--- a/arch/arm/boot/dts/rk3288-tinker.dtsi
+++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
@@ -113,6 +113,17 @@
 	cpu0-supply = <&vdd_cpu>;
 };
 
+&cpu_opp_table {
+	opp-1704000000 {
+		opp-hz = /bits/ 64 <1704000000>;
+		opp-microvolt = <1350000>;
+	};
+	opp-1800000000 {
+		opp-hz = /bits/ 64 <1800000000>;
+		opp-microvolt = <1400000>;
+	};
+};
+
 &gmac {
 	assigned-clocks = <&cru SCLK_MAC>;
 	assigned-clock-parents = <&ext_gmac>;
@@ -175,7 +186,7 @@
 				regulator-always-on;
 				regulator-boot-on;
 				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <1350000>;
+				regulator-max-microvolt = <1400000>;
 				regulator-name = "vdd_arm";
 				regulator-ramp-delay = <6000>;
 				regulator-state-mem {
diff --git a/arch/arm/boot/dts/rk3288-veyron-brain.dts b/arch/arm/boot/dts/rk3288-veyron-brain.dts
index 406146cbff29..aa33d09184ad 100644
--- a/arch/arm/boot/dts/rk3288-veyron-brain.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-brain.dts
@@ -7,6 +7,7 @@
 
 /dts-v1/;
 #include "rk3288-veyron.dtsi"
+#include "rk3288-veyron-broadcom-bluetooth.dtsi"
 
 / {
 	model = "Google Brain";
@@ -40,6 +41,14 @@
 };
 
 &pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		/* Common for sleep and wake, but no owners */
+		&ddr0_retention
+		&ddrio_pwroff
+		&global_pwroff
+	>;
+
 	hdmi {
 		vcc50_hdmi_en: vcc50-hdmi-en {
 			rockchip,pins = <7 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
diff --git a/arch/arm/boot/dts/rk3288-veyron-broadcom-bluetooth.dtsi b/arch/arm/boot/dts/rk3288-veyron-broadcom-bluetooth.dtsi
new file mode 100644
index 000000000000..a10d25ac8f7b
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-veyron-broadcom-bluetooth.dtsi
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Veyron (and derivatives) fragment for the Broadcom 43450 bluetooth
+ * chip.
+ *
+ * Copyright 2019 Google, Inc
+ */
+
+&uart0 {
+	bluetooth {
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_l>, <&bt_enable_l>,
+			    <&bt_dev_wake>;
+
+		compatible = "brcm,bcm43540-bt";
+		host-wakeup-gpios	= <&gpio4 RK_PD7 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios		= <&gpio4 RK_PD5 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios	= <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
+		max-speed		= <3000000>;
+		brcm,bt-pcm-int-params	= [01 02 00 01 01];
+	};
+};
diff --git a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
index ffb60f880b39..05112c25176d 100644
--- a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
@@ -136,27 +136,6 @@
 };
 
 &pinctrl {
-	pinctrl-0 = <
-		/* Common for sleep and wake, but no owners */
-		&ddr0_retention
-		&ddrio_pwroff
-		&global_pwroff
-
-		/* Wake only */
-		&suspend_l_wake
-		&bt_dev_wake_awake
-	>;
-	pinctrl-1 = <
-		/* Common for sleep and wake, but no owners */
-		&ddr0_retention
-		&ddrio_pwroff
-		&global_pwroff
-
-		/* Sleep only */
-		&suspend_l_sleep
-		&bt_dev_wake_sleep
-	>;
-
 	buttons {
 		ap_lid_int_l: ap-lid-int-l {
 			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
diff --git a/arch/arm/boot/dts/rk3288-veyron-edp.dtsi b/arch/arm/boot/dts/rk3288-veyron-edp.dtsi
index 300a7e32c978..32c0f10765dd 100644
--- a/arch/arm/boot/dts/rk3288-veyron-edp.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron-edp.dtsi
@@ -54,7 +54,7 @@
 	};
 
 	panel: panel {
-		compatible = "innolux,n116bge", "simple-panel";
+		compatible = "innolux,n116bge";
 		status = "okay";
 		power-supply = <&panel_regulator>;
 		backlight = <&backlight>;
diff --git a/arch/arm/boot/dts/rk3288-veyron-fievel.dts b/arch/arm/boot/dts/rk3288-veyron-fievel.dts
index 9a0f55085839..309b122b4d0d 100644
--- a/arch/arm/boot/dts/rk3288-veyron-fievel.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-fievel.dts
@@ -18,8 +18,6 @@
 		     "google,veyron-fievel-rev0", "google,veyron-fievel",
 		     "google,veyron", "rockchip,rk3288";
 
-	/delete-node/ bt-activity;
-
 	vccsys: vccsys {
 		compatible = "regulator-fixed";
 		regulator-name = "vccsys";
@@ -215,7 +213,11 @@
 			  "PHY_PMEB",
 
 			  "PHY_INT",
-			  "REC_MODE_L",
+			  /*
+			   * RECOVERY_SW_L is Chrome OS ABI.  Schematics call
+			   * it REC_MODE_L.
+			   */
+			  "RECOVERY_SW_L",
 			  "OTP_OUT",
 			  "",
 			  "USB_OTG_POWER_EN",
@@ -382,7 +384,11 @@
 			  "PWR_LED1",
 			  "TPM_INT_H",
 			  "SPK_ON",
-			  "FW_WP_AP",
+			  /*
+			   * AP_FLASH_WP_L is Chrome OS ABI.  Schematics call
+			   * it FW_WP_AP.
+			   */
+			  "AP_FLASH_WP_L",
 			  "",
 
 			  "CPU_NMI",
diff --git a/arch/arm/boot/dts/rk3288-veyron-jaq.dts b/arch/arm/boot/dts/rk3288-veyron-jaq.dts
index a4966e505a2f..171ba6185b6d 100644
--- a/arch/arm/boot/dts/rk3288-veyron-jaq.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-jaq.dts
@@ -273,6 +273,28 @@
 };
 
 &pinctrl {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <
+		/* Common for sleep and wake, but no owners */
+		&ddr0_retention
+		&ddrio_pwroff
+		&global_pwroff
+
+		/* Wake only */
+		&suspend_l_wake
+		&bt_dev_wake_awake
+	>;
+	pinctrl-1 = <
+		/* Common for sleep and wake, but no owners */
+		&ddr0_retention
+		&ddrio_pwroff
+		&global_pwroff
+
+		/* Sleep only */
+		&suspend_l_sleep
+		&bt_dev_wake_sleep
+	>;
+
 	buck-5v {
 		drv_5v: drv-5v {
 			rockchip,pins = <7 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
diff --git a/arch/arm/boot/dts/rk3288-veyron-jerry.dts b/arch/arm/boot/dts/rk3288-veyron-jerry.dts
index a6ee44f0fe13..66f00d28801a 100644
--- a/arch/arm/boot/dts/rk3288-veyron-jerry.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-jerry.dts
@@ -418,6 +418,28 @@
 };
 
 &pinctrl {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <
+		/* Common for sleep and wake, but no owners */
+		&ddr0_retention
+		&ddrio_pwroff
+		&global_pwroff
+
+		/* Wake only */
+		&suspend_l_wake
+		&bt_dev_wake_awake
+	>;
+	pinctrl-1 = <
+		/* Common for sleep and wake, but no owners */
+		&ddr0_retention
+		&ddrio_pwroff
+		&global_pwroff
+
+		/* Sleep only */
+		&suspend_l_sleep
+		&bt_dev_wake_sleep
+	>;
+
 	buck-5v {
 		drv_5v: drv-5v {
 			rockchip,pins = <7 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
diff --git a/arch/arm/boot/dts/rk3288-veyron-mickey.dts b/arch/arm/boot/dts/rk3288-veyron-mickey.dts
index 06a6a9554c48..ffd1121d19be 100644
--- a/arch/arm/boot/dts/rk3288-veyron-mickey.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-mickey.dts
@@ -7,6 +7,7 @@
 
 /dts-v1/;
 #include "rk3288-veyron.dtsi"
+#include "rk3288-veyron-broadcom-bluetooth.dtsi"
 
 / {
 	model = "Google Mickey";
@@ -411,6 +412,14 @@
 };
 
 &pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		/* Common for sleep and wake, but no owners */
+		&ddr0_retention
+		&ddrio_pwroff
+		&global_pwroff
+	>;
+
 	hdmi {
 		power_hdmi_on: power-hdmi-on {
 			rockchip,pins = <7 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
diff --git a/arch/arm/boot/dts/rk3288-veyron-minnie.dts b/arch/arm/boot/dts/rk3288-veyron-minnie.dts
index c833716dbe48..383fad1a88a1 100644
--- a/arch/arm/boot/dts/rk3288-veyron-minnie.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-minnie.dts
@@ -7,6 +7,7 @@
 
 /dts-v1/;
 #include "rk3288-veyron-chromebook.dtsi"
+#include "rk3288-veyron-broadcom-bluetooth.dtsi"
 
 / {
 	model = "Google Minnie";
@@ -70,7 +71,7 @@
 };
 
 &panel {
-	compatible = "auo,b101ean01", "simple-panel";
+	compatible = "auo,b101ean01";
 
 	/delete-node/ panel-timing;
 
@@ -344,6 +345,26 @@
 };
 
 &pinctrl {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <
+		/* Common for sleep and wake, but no owners */
+		&ddr0_retention
+		&ddrio_pwroff
+		&global_pwroff
+
+		/* Wake only */
+		&suspend_l_wake
+	>;
+	pinctrl-1 = <
+		/* Common for sleep and wake, but no owners */
+		&ddr0_retention
+		&ddrio_pwroff
+		&global_pwroff
+
+		/* Sleep only */
+		&suspend_l_sleep
+	>;
+
 	buck-5v {
 		drv_5v: drv-5v {
 			rockchip,pins = <7 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
diff --git a/arch/arm/boot/dts/rk3288-veyron-pinky.dts b/arch/arm/boot/dts/rk3288-veyron-pinky.dts
index f420499f300a..71e6629cc208 100644
--- a/arch/arm/boot/dts/rk3288-veyron-pinky.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-pinky.dts
@@ -64,6 +64,28 @@
 };
 
 &pinctrl {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <
+		/* Common for sleep and wake, but no owners */
+		&ddr0_retention
+		&ddrio_pwroff
+		&global_pwroff
+
+		/* Wake only */
+		&suspend_l_wake
+		&bt_dev_wake_awake
+	>;
+	pinctrl-1 = <
+		/* Common for sleep and wake, but no owners */
+		&ddr0_retention
+		&ddrio_pwroff
+		&global_pwroff
+
+		/* Sleep only */
+		&suspend_l_sleep
+		&bt_dev_wake_sleep
+	>;
+
 	/delete-node/ lcd;
 
 	backlight {
diff --git a/arch/arm/boot/dts/rk3288-veyron-speedy.dts b/arch/arm/boot/dts/rk3288-veyron-speedy.dts
index 2f2989bc3f9c..e354c61a45e7 100644
--- a/arch/arm/boot/dts/rk3288-veyron-speedy.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-speedy.dts
@@ -7,6 +7,7 @@
 
 /dts-v1/;
 #include "rk3288-veyron-chromebook.dtsi"
+#include "rk3288-veyron-broadcom-bluetooth.dtsi"
 #include "cros-ec-sbs.dtsi"
 
 / {
@@ -279,6 +280,26 @@
 };
 
 &pinctrl {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <
+		/* Common for sleep and wake, but no owners */
+		&ddr0_retention
+		&ddrio_pwroff
+		&global_pwroff
+
+		/* Wake only */
+		&suspend_l_wake
+	>;
+	pinctrl-1 = <
+		/* Common for sleep and wake, but no owners */
+		&ddr0_retention
+		&ddrio_pwroff
+		&global_pwroff
+
+		/* Sleep only */
+		&suspend_l_sleep
+	>;
+
 	buck-5v {
 		drv_5v: drv-5v {
 			rockchip,pins = <7 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
diff --git a/arch/arm/boot/dts/rk3288-veyron-tiger.dts b/arch/arm/boot/dts/rk3288-veyron-tiger.dts
index bebb230e592f..069f0c2c1fdf 100644
--- a/arch/arm/boot/dts/rk3288-veyron-tiger.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-tiger.dts
@@ -53,7 +53,7 @@
 };
 
 &panel {
-	compatible = "auo,b101ean01", "simple-panel";
+	compatible = "auo,b101ean01";
 
 	/delete-node/ panel-timing;
 
diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi
index 7525e3dd1fc1..54a6838d73f5 100644
--- a/arch/arm/boot/dts/rk3288-veyron.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron.dtsi
@@ -23,30 +23,6 @@
 		reg = <0x0 0x0 0x0 0x80000000>;
 	};
 
-	bt_activity: bt-activity {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&bt_host_wake>;
-
-		/*
-		 * HACK: until we have an LPM driver, we'll use an
-		 * ugly GPIO key to allow Bluetooth to wake from S3.
-		 * This is expected to only be used by BT modules that
-		 * use UART for comms.  For BT modules that talk over
-		 * SDIO we should use a wakeup mechanism related to SDIO.
-		 *
-		 * Use KEY_RESERVED here since that will work as a wakeup but
-		 * doesn't get reported to higher levels (so doesn't confuse
-		 * Chrome).
-		 */
-		bt-wake {
-			label = "BT Wakeup";
-			gpios = <&gpio4 RK_PD7 GPIO_ACTIVE_HIGH>;
-			linux,code = <KEY_RESERVED>;
-			wakeup-source;
-		};
-
-	};
 
 	power_button: power-button {
 		compatible = "gpio-keys";
@@ -82,22 +58,17 @@
 		clocks = <&rk808 RK808_CLKOUT1>;
 		clock-names = "ext_clock";
 		pinctrl-names = "default";
-		pinctrl-0 = <&bt_enable_l>, <&wifi_enable_h>;
+		pinctrl-0 = <&wifi_enable_h>;
 
 		/*
-		 * Depending on the actual card populated GPIO4 D4 and D5
+		 * Depending on the actual card populated GPIO4 D4
 		 * correspond to one of these signals on the module:
 		 *
 		 * D4:
 		 * - SDIO_RESET_L_WL_REG_ON
 		 * - PDN (power down when low)
-		 *
-		 * D5:
-		 * - BT_I2S_WS_BT_RFDISABLE_L
-		 * - No connect
 		 */
-		reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>,
-			      <&gpio4 RK_PD5 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>;
 	};
 
 	vcc_5v: vcc-5v {
@@ -481,26 +452,6 @@
 };
 
 &pinctrl {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <
-		/* Common for sleep and wake, but no owners */
-		&ddr0_retention
-		&ddrio_pwroff
-		&global_pwroff
-
-		/* Wake only */
-		&bt_dev_wake_awake
-	>;
-	pinctrl-1 = <
-		/* Common for sleep and wake, but no owners */
-		&ddr0_retention
-		&ddrio_pwroff
-		&global_pwroff
-
-		/* Sleep only */
-		&bt_dev_wake_sleep
-	>;
-
 	pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
 		bias-disable;
 		drive-strength = <8>;
@@ -622,6 +573,10 @@
 		bt_dev_wake_awake: bt-dev-wake-awake {
 			rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_output_high>;
 		};
+
+		bt_dev_wake: bt-dev-wake {
+			rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
 	};
 
 	tpm {
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 415c75f5783c..9beb662166aa 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -247,7 +247,7 @@
 		ports = <&vopl_out>, <&vopb_out>;
 	};
 
-	sdmmc: dwmmc@ff0c0000 {
+	sdmmc: mmc@ff0c0000 {
 		compatible = "rockchip,rk3288-dw-mshc";
 		max-frequency = <150000000>;
 		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
@@ -261,7 +261,7 @@
 		status = "disabled";
 	};
 
-	sdio0: dwmmc@ff0d0000 {
+	sdio0: mmc@ff0d0000 {
 		compatible = "rockchip,rk3288-dw-mshc";
 		max-frequency = <150000000>;
 		clocks = <&cru HCLK_SDIO0>, <&cru SCLK_SDIO0>,
@@ -275,7 +275,7 @@
 		status = "disabled";
 	};
 
-	sdio1: dwmmc@ff0e0000 {
+	sdio1: mmc@ff0e0000 {
 		compatible = "rockchip,rk3288-dw-mshc";
 		max-frequency = <150000000>;
 		clocks = <&cru HCLK_SDIO1>, <&cru SCLK_SDIO1>,
@@ -289,7 +289,7 @@
 		status = "disabled";
 	};
 
-	emmc: dwmmc@ff0f0000 {
+	emmc: mmc@ff0f0000 {
 		compatible = "rockchip,rk3288-dw-mshc";
 		max-frequency = <150000000>;
 		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi
index 97307a405e60..241f43e29c77 100644
--- a/arch/arm/boot/dts/rk3xxx.dtsi
+++ b/arch/arm/boot/dts/rk3xxx.dtsi
@@ -231,7 +231,7 @@
 		status = "disabled";
 	};
 
-	mmc0: dwmmc@10214000 {
+	mmc0: mmc@10214000 {
 		compatible = "rockchip,rk2928-dw-mshc";
 		reg = <0x10214000 0x1000>;
 		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
@@ -245,7 +245,7 @@
 		status = "disabled";
 	};
 
-	mmc1: dwmmc@10218000 {
+	mmc1: mmc@10218000 {
 		compatible = "rockchip,rk2928-dw-mshc";
 		reg = <0x10218000 0x1000>;
 		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
@@ -259,7 +259,7 @@
 		status = "disabled";
 	};
 
-	emmc: dwmmc@1021c000 {
+	emmc: mmc@1021c000 {
 		compatible = "rockchip,rk2928-dw-mshc";
 		reg = <0x1021c000 0x1000>;
 		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/rockchip-radxa-dalang-carrier.dtsi b/arch/arm/boot/dts/rockchip-radxa-dalang-carrier.dtsi
new file mode 100644
index 000000000000..df3712aedf8a
--- /dev/null
+++ b/arch/arm/boot/dts/rockchip-radxa-dalang-carrier.dtsi
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2019 Radxa Limited
+ * Copyright (c) 2019 Amarula Solutions(India)
+ */
+
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+};
+
+&gmac {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+	i2c-scl-rising-time-ns = <140>;
+	i2c-scl-falling-time-ns = <30>;
+};
+
+&i2c2 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	hym8563: hym8563@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "hym8563";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	vqmmc-supply = <&vccio_sd>;
+	max-frequency = <150000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&pinctrl {
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins =
+				<4 RK_PD6 0 &pcfg_pull_up>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/rv1108.dtsi b/arch/arm/boot/dts/rv1108.dtsi
index 5876690ee09e..1fd06e7cb983 100644
--- a/arch/arm/boot/dts/rv1108.dtsi
+++ b/arch/arm/boot/dts/rv1108.dtsi
@@ -456,7 +456,7 @@
 		#reset-cells = <1>;
 	};
 
-	emmc: dwmmc@30110000 {
+	emmc: mmc@30110000 {
 		compatible = "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc";
 		reg = <0x30110000 0x4000>;
 		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
@@ -468,7 +468,7 @@
 		status = "disabled";
 	};
 
-	sdio: dwmmc@30120000 {
+	sdio: mmc@30120000 {
 		compatible = "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc";
 		reg = <0x30120000 0x4000>;
 		interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
@@ -480,7 +480,7 @@
 		status = "disabled";
 	};
 
-	sdmmc: dwmmc@30130000 {
+	sdmmc: mmc@30130000 {
 		compatible = "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc";
 		reg = <0x30130000 0x4000>;
 		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/s3c2416-smdk2416.dts b/arch/arm/boot/dts/s3c2416-smdk2416.dts
index cb371bf72f64..811bfdef4e9b 100644
--- a/arch/arm/boot/dts/s3c2416-smdk2416.dts
+++ b/arch/arm/boot/dts/s3c2416-smdk2416.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * SAMSUNG SMDK2416 board device tree source
+ * Samsung SMDK2416 board device tree source
  *
  * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
  */
diff --git a/arch/arm/boot/dts/s3c6410-smdk6410.dts b/arch/arm/boot/dts/s3c6410-smdk6410.dts
index 3bf6c450a26e..96267f5f02a8 100644
--- a/arch/arm/boot/dts/s3c6410-smdk6410.dts
+++ b/arch/arm/boot/dts/s3c6410-smdk6410.dts
@@ -4,7 +4,7 @@
  *
  * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
  *
- * Device tree source file for SAMSUNG SMDK6410 board which is based on
+ * Device tree source file for Samsung SMDK6410 board which is based on
  * Samsung's S3C6410 SoC.
  */
 
@@ -16,7 +16,7 @@
 #include "s3c6410.dtsi"
 
 / {
-	model = "SAMSUNG SMDK6410 board based on S3C6410";
+	model = "Samsung SMDK6410 board based on S3C6410";
 	compatible = "samsung,mini6410", "samsung,s3c6410";
 
 	memory@50000000 {
diff --git a/arch/arm/boot/dts/sam9x60.dtsi b/arch/arm/boot/dts/sam9x60.dtsi
new file mode 100644
index 000000000000..326b39328b58
--- /dev/null
+++ b/arch/arm/boot/dts/sam9x60.dtsi
@@ -0,0 +1,691 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * sam9x60.dtsi - Device Tree Include file for Microchip SAM9X60 SoC
+ *
+ * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Sandeep Sheriker M <sandeepsheriker.mallikarjun@microchip.com>
+ */
+
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/atmel-flexcom.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Microchip SAM9X60 SoC";
+	compatible = "microchip,sam9x60";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &dbgu;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		gpio3 = &pioD;
+		tcb0 = &tcb0;
+		tcb1 = &tcb1;
+	};
+
+	cpus {
+		#address-cells = <0>;
+		#size-cells = <0>;
+
+		cpu {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x20000000 0x10000000>;
+	};
+
+	clocks {
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+	};
+
+	sram: sram@300000 {
+		compatible = "mmio-sram";
+		reg = <0x00300000 0x100000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		usb1: ohci@600000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00600000 0x100000>;
+			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_SYSTEM 6>;
+			clock-names = "ohci_clk", "hclk", "uhpck";
+			status = "disabled";
+		};
+
+		usb2: ehci@700000 {
+			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
+			reg = <0x00700000 0x100000>;
+			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 22>;
+			clock-names = "usb_clk", "ehci_clk";
+			assigned-clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>;
+			assigned-clock-rates = <480000000>;
+			status = "disabled";
+		};
+
+		ebi: ebi@10000000 {
+			compatible = "microchip,sam9x60-ebi";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			atmel,smc = <&smc>;
+			microchip,sfr = <&sfr>;
+			reg = <0x10000000 0x60000000>;
+			ranges = <0x0 0x0 0x10000000 0x10000000
+				  0x1 0x0 0x20000000 0x10000000
+				  0x2 0x0 0x30000000 0x10000000
+				  0x3 0x0 0x40000000 0x10000000
+				  0x4 0x0 0x50000000 0x10000000
+				  0x5 0x0 0x60000000 0x10000000>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			status = "disabled";
+
+			nand_controller: nand-controller {
+				compatible = "microchip,sam9x60-nand-controller";
+				ecc-engine = <&pmecc>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				ranges;
+				status = "disabled";
+			};
+		};
+
+		sdmmc0: sdio-host@80000000 {
+			compatible = "microchip,sam9x60-sdhci";
+			reg = <0x80000000 0x300>;
+			interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 12>, <&pmc PMC_TYPE_GCK 12>;
+			clock-names = "hclock", "multclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 12>;
+			assigned-clock-rates = <100000000>;
+			status = "disabled";
+		};
+
+		sdmmc1: sdio-host@90000000 {
+			compatible = "microchip,sam9x60-sdhci";
+			reg = <0x90000000 0x300>;
+			interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 26>, <&pmc PMC_TYPE_GCK 26>;
+			clock-names = "hclock", "multclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 26>;
+			assigned-clock-rates = <100000000>;
+			status = "disabled";
+		};
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			flx4: flexcom@f0000000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf0000000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf0000000 0x800>;
+				status = "disabled";
+			};
+
+			flx5: flexcom@f0004000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf0004000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf0004000 0x800>;
+				status = "disabled";
+			};
+
+			dma0: dma-controller@f0008000 {
+				compatible = "microchip,sam9x60-dma", "atmel,sama5d4-dma";
+				reg = <0xf0008000 0x1000>;
+				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
+				#dma-cells = <1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
+				clock-names = "dma_clk";
+			};
+
+			ssc: ssc@f0010000 {
+				compatible = "atmel,at91sam9g45-ssc";
+				reg = <0xf0010000 0x4000>;
+				interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(38))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(39))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			qspi: spi@f0014000 {
+				compatible = "microchip,sam9x60-qspi";
+				reg = <0xf0014000 0x100>, <0x70000000 0x10000000>;
+				reg-names = "qspi_base", "qspi_mmap";
+				interrupts = <35 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(26))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(27))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 35>, <&pmc PMC_TYPE_SYSTEM 19>;
+				clock-names = "pclk", "qspick";
+				atmel,pmc = <&pmc>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2s: i2s@f001c000 {
+				compatible = "microchip,sam9x60-i2smcc";
+				reg = <0xf001c000 0x100>;
+				interrupts = <34 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(36))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(37))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 34>, <&pmc PMC_TYPE_GCK 34>;
+				clock-names = "pclk", "gclk";
+				status = "disabled";
+			};
+
+			flx11: flexcom@f0020000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf0020000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf0020000 0x800>;
+				status = "disabled";
+			};
+
+			flx12: flexcom@f0024000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf0024000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf0024000 0x800>;
+				status = "disabled";
+			};
+
+			pit64b: timer@f0028000 {
+				compatible = "microchip,sam9x60-pit64b";
+				reg = <0xf0028000 0x100>;
+				interrupts = <37 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 37>, <&pmc PMC_TYPE_GCK 37>;
+				clock-names = "pclk", "gclk";
+			};
+
+			sha: sha@f002c000 {
+				compatible = "atmel,at91sam9g46-sha";
+				reg = <0xf002c000 0x100>;
+				interrupts = <41 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(34))>;
+				dma-names = "tx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
+				clock-names = "sha_clk";
+				status = "okay";
+			};
+
+			trng: trng@f0030000 {
+				compatible = "microchip,sam9x60-trng";
+				reg = <0xf0030000 0x100>;
+				interrupts = <38 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
+				status = "okay";
+			};
+
+			aes: aes@f0034000 {
+				compatible = "atmel,at91sam9g46-aes";
+				reg = <0xf0034000 0x100>;
+				interrupts = <39 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(32))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(33))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
+				clock-names = "aes_clk";
+				status = "okay";
+			};
+
+			tdes: tdes@f0038000 {
+				compatible = "atmel,at91sam9g46-tdes";
+				reg = <0xf0038000 0x100>;
+				interrupts = <40 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(31))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(30))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 40>;
+				clock-names = "tdes_clk";
+				status = "okay";
+			};
+
+			classd: classd@f003c000 {
+				compatible = "atmel,sama5d2-classd";
+				reg = <0xf003c000 0x100>;
+				interrupts = <42 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(35))>;
+				dma-names = "tx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 42>, <&pmc PMC_TYPE_GCK 42>;
+				clock-names = "pclk", "gclk";
+				status = "disabled";
+			};
+
+			can0: can@f8000000 {
+				compatible = "microchip,sam9x60-can", "atmel,at91sam9x5-can";
+				reg = <0xf8000000 0x300>;
+				interrupts = <29 IRQ_TYPE_LEVEL_HIGH 3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 29>;
+				clock-names = "can_clk";
+				status = "disabled";
+			};
+
+			can1: can@f8004000 {
+				compatible = "microchip,sam9x60-can", "atmel,at91sam9x5-can";
+				reg = <0xf8004000 0x300>;
+				interrupts = <30 IRQ_TYPE_LEVEL_HIGH 3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 30>;
+				clock-names = "can_clk";
+				status = "disabled";
+			};
+
+			tcb0: timer@f8008000 {
+				compatible = "microchip,sam9x60-tcb", "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xf8008000 0x100>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k 0>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+
+			tcb1: timer@f800c000 {
+				compatible = "microchip,sam9x60-tcb", "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xf800c000 0x100>;
+				interrupts = <45 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 45>, <&clk32k 0>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+
+			flx6: flexcom@f8010000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8010000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8010000 0x800>;
+				status = "disabled";
+			};
+
+			flx7: flexcom@f8014000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8014000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8014000 0x800>;
+				status = "disabled";
+			};
+
+			flx8: flexcom@f8018000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8018000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8018000 0x800>;
+				status = "disabled";
+			};
+
+			flx0: flexcom@f801c000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf801c000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf801c000 0x800>;
+				status = "disabled";
+			};
+
+			flx1: flexcom@f8020000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8020000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8020000 0x800>;
+				status = "disabled";
+			};
+
+			flx2: flexcom@f8024000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8024000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8024000 0x800>;
+				status = "disabled";
+			};
+
+			flx3: flexcom@f8028000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8028000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8028000 0x800>;
+				status = "disabled";
+			};
+
+			macb0: ethernet@f802c000 {
+				compatible = "cdns,sam9x60-macb", "cdns,macb";
+				reg = <0xf802c000 0x1000>;
+				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 24>, <&pmc PMC_TYPE_PERIPHERAL 24>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+
+			macb1: ethernet@f8030000 {
+				compatible = "cdns,sam9x60-macb", "cdns,macb";
+				reg = <0xf8030000 0x1000>;
+				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 27>, <&pmc PMC_TYPE_PERIPHERAL 27>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+
+			pwm0: pwm@f8034000 {
+				compatible = "microchip,sam9x60-pwm";
+				reg = <0xf8034000 0x300>;
+				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
+				#pwm-cells = <3>;
+				status="disabled";
+			};
+
+			hlcdc: hlcdc@f8038000 {
+				compatible = "microchip,sam9x60-hlcdc";
+				reg = <0xf8038000 0x4000>;
+				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 25>, <&pmc PMC_TYPE_GCK 25>, <&clk32k 1>;
+				clock-names = "periph_clk","sys_clk", "slow_clk";
+				assigned-clocks = <&pmc PMC_TYPE_GCK 25>;
+				assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_MCK>;
+				status = "disabled";
+
+				hlcdc-display-controller {
+					compatible = "atmel,hlcdc-display-controller";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						reg = <0>;
+					};
+				};
+
+				hlcdc_pwm: hlcdc-pwm {
+					compatible = "atmel,hlcdc-pwm";
+					#pwm-cells = <3>;
+				};
+			};
+
+			flx9: flexcom@f8040000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8040000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8040000 0x800>;
+				status = "disabled";
+			};
+
+			flx10: flexcom@f8044000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8044000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8044000 0x800>;
+				status = "disabled";
+			};
+
+			isi: isi@f8048000 {
+				compatible = "microchip,sam9x60-isi", "atmel,at91sam9g45-isi";
+				reg = <0xf8048000 0x100>;
+				interrupts = <43 IRQ_TYPE_LEVEL_HIGH 5>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 43>;
+				clock-names = "isi_clk";
+				status = "disabled";
+				port {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+
+			adc: adc@f804c000 {
+				compatible = "microchip,sam9x60-adc", "atmel,sama5d2-adc";
+				reg = <0xf804c000 0x100>;
+				interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
+				clock-names = "adc_clk";
+				dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(40))>;
+				dma-names = "rx";
+				atmel,min-sample-rate-hz = <200000>;
+				atmel,max-sample-rate-hz = <20000000>;
+				atmel,startup-time-ms = <4>;
+				atmel,trigger-edge-type = <IRQ_TYPE_EDGE_RISING>;
+				#io-channel-cells = <1>;
+				status = "disabled";
+			};
+
+			sfr: sfr@f8050000 {
+				compatible = "microchip,sam9x60-sfr", "syscon";
+				reg = <0xf8050000 0x100>;
+			};
+
+			matrix: matrix@ffffde00 {
+				compatible = "microchip,sam9x60-matrix", "atmel,at91sam9x5-matrix", "syscon";
+				reg = <0xffffde00 0x200>;
+			};
+
+			pmecc: ecc-engine@ffffe000 {
+				compatible = "microchip,sam9x60-pmecc", "atmel,at91sam9g45-pmecc";
+				reg = <0xffffe000 0x300>,
+				      <0xffffe600 0x100>;
+			};
+
+			mpddrc: mpddrc@ffffe800 {
+				compatible = "microchip,sam9x60-ddramc", "atmel,sama5d3-ddramc";
+				reg = <0xffffe800 0x200>;
+				clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_CORE PMC_MCK>;
+				clock-names = "ddrck", "mpddr";
+			};
+
+			smc: smc@ffffea00 {
+				compatible = "microchip,sam9x60-smc", "atmel,at91sam9260-smc", "syscon";
+				reg = <0xffffea00 0x100>;
+			};
+
+			aic: interrupt-controller@fffff100 {
+				compatible = "microchip,sam9x60-aic";
+				#interrupt-cells = <3>;
+				interrupt-controller;
+				reg = <0xfffff100 0x100>;
+				atmel,external-irqs = <31>;
+			};
+
+			dbgu: serial@fffff200 {
+				compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+				reg = <0xfffff200 0x200>;
+				interrupts = <47 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(28))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(29))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			pinctrl: pinctrl@fffff400 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "microchip,sam9x60-pinctrl", "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
+				ranges = <0xfffff400 0xfffff400 0x800>;
+
+				pioA: gpio@fffff400 {
+					compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff400 0x200>;
+					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
+				};
+
+				pioB: gpio@fffff600 {
+					compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff600 0x200>;
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					#gpio-lines = <26>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
+				};
+
+				pioC: gpio@fffff800 {
+					compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff800 0x200>;
+					interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
+				};
+
+				pioD: gpio@fffffa00 {
+					compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffffa00 0x200>;
+					interrupts = <44 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					#gpio-lines = <22>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 44>;
+				};
+			};
+
+			pmc: pmc@fffffc00 {
+				compatible = "microchip,sam9x60-pmc", "syscon";
+				reg = <0xfffffc00 0x200>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				#clock-cells = <2>;
+				clocks = <&clk32k 1>, <&clk32k 0>, <&main_xtal>;
+				clock-names = "td_slck", "md_slck", "main_xtal";
+			};
+
+			reset_controller: rstc@fffffe00 {
+				compatible = "microchip,sam9x60-rstc";
+				reg = <0xfffffe00 0x10>;
+				clocks = <&clk32k 0>;
+			};
+
+			shutdown_controller: shdwc@fffffe10 {
+				compatible = "microchip,sam9x60-shdwc";
+				reg = <0xfffffe10 0x10>;
+				clocks = <&clk32k 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				atmel,wakeup-rtc-timer;
+				atmel,wakeup-rtt-timer;
+				status = "disabled";
+			};
+
+			pit: timer@fffffe40 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xfffffe40 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			};
+
+			clk32k: sckc@fffffe50 {
+				compatible = "microchip,sam9x60-sckc";
+				reg = <0xfffffe50 0x4>;
+				clocks = <&slow_xtal>;
+				#clock-cells = <1>;
+			};
+
+			gpbr: syscon@fffffe60 {
+				compatible = "microchip,sam9x60-gpbr", "atmel,at91sam9260-gpbr", "syscon";
+				reg = <0xfffffe60 0x10>;
+			};
+
+			rtc: rtc@fffffea8 {
+				compatible = "microchip,sam9x60-rtc", "atmel,at91sam9x5-rtc";
+				reg = <0xfffffea8 0x100>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k 0>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index 565204816e34..2012b7407c60 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -300,6 +300,8 @@
 			interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>;
 			clocks = <&pmc PMC_TYPE_PERIPHERAL 31>, <&pmc PMC_TYPE_GCK 31>, <&pmc PMC_TYPE_CORE PMC_MAIN>;
 			clock-names = "hclock", "multclk", "baseclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 31>;
+			assigned-clock-rates = <480000000>;
 			status = "disabled";
 		};
 
@@ -309,6 +311,8 @@
 			interrupts = <32 IRQ_TYPE_LEVEL_HIGH 0>;
 			clocks = <&pmc PMC_TYPE_PERIPHERAL 32>, <&pmc PMC_TYPE_GCK 32>, <&pmc PMC_TYPE_CORE PMC_MAIN>;
 			clock-names = "hclock", "multclk", "baseclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 32>;
+			assigned-clock-rates = <480000000>;
 			status = "disabled";
 		};
 
@@ -615,6 +619,7 @@
 				interrupts = <38 IRQ_TYPE_LEVEL_HIGH 7>;
 				#pwm-cells = <3>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
+				status = "disabled";
 			};
 
 			sfr: sfr@f8030000 {
@@ -884,9 +889,12 @@
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
 			};
 
-			secumod@fc040000 {
+			pioBU: secumod@fc040000 {
 				compatible = "atmel,sama5d2-secumod", "syscon";
 				reg = <0xfc040000 0x100>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
 			};
 
 			tdes@fc044000 {
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index f770aace0efd..203d40be70a5 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -1188,49 +1188,49 @@
 					usart0_clk: usart0_clk {
 						#clock-cells = <0>;
 						reg = <12>;
-						atmel,clk-output-range = <0 66000000>;
+						atmel,clk-output-range = <0 83000000>;
 					};
 
 					usart1_clk: usart1_clk {
 						#clock-cells = <0>;
 						reg = <13>;
-						atmel,clk-output-range = <0 66000000>;
+						atmel,clk-output-range = <0 83000000>;
 					};
 
 					usart2_clk: usart2_clk {
 						#clock-cells = <0>;
 						reg = <14>;
-						atmel,clk-output-range = <0 66000000>;
+						atmel,clk-output-range = <0 83000000>;
 					};
 
 					usart3_clk: usart3_clk {
 						#clock-cells = <0>;
 						reg = <15>;
-						atmel,clk-output-range = <0 66000000>;
+						atmel,clk-output-range = <0 83000000>;
 					};
 
 					uart0_clk: uart0_clk {
 						#clock-cells = <0>;
 						reg = <16>;
-						atmel,clk-output-range = <0 66000000>;
+						atmel,clk-output-range = <0 83000000>;
 					};
 
 					twi0_clk: twi0_clk {
 						reg = <18>;
 						#clock-cells = <0>;
-						atmel,clk-output-range = <0 16625000>;
+						atmel,clk-output-range = <0 41500000>;
 					};
 
 					twi1_clk: twi1_clk {
 						#clock-cells = <0>;
 						reg = <19>;
-						atmel,clk-output-range = <0 16625000>;
+						atmel,clk-output-range = <0 41500000>;
 					};
 
 					twi2_clk: twi2_clk {
 						#clock-cells = <0>;
 						reg = <20>;
-						atmel,clk-output-range = <0 16625000>;
+						atmel,clk-output-range = <0 41500000>;
 					};
 
 					mci0_clk: mci0_clk {
@@ -1246,19 +1246,19 @@
 					spi0_clk: spi0_clk {
 						#clock-cells = <0>;
 						reg = <24>;
-						atmel,clk-output-range = <0 133000000>;
+						atmel,clk-output-range = <0 166000000>;
 					};
 
 					spi1_clk: spi1_clk {
 						#clock-cells = <0>;
 						reg = <25>;
-						atmel,clk-output-range = <0 133000000>;
+						atmel,clk-output-range = <0 166000000>;
 					};
 
 					tcb0_clk: tcb0_clk {
 						#clock-cells = <0>;
 						reg = <26>;
-						atmel,clk-output-range = <0 133000000>;
+						atmel,clk-output-range = <0 166000000>;
 					};
 
 					pwm_clk: pwm_clk {
@@ -1269,7 +1269,7 @@
 					adc_clk: adc_clk {
 						#clock-cells = <0>;
 						reg = <29>;
-						atmel,clk-output-range = <0 66000000>;
+						atmel,clk-output-range = <0 83000000>;
 					};
 
 					dma0_clk: dma0_clk {
@@ -1300,13 +1300,13 @@
 					ssc0_clk: ssc0_clk {
 						#clock-cells = <0>;
 						reg = <38>;
-						atmel,clk-output-range = <0 66000000>;
+						atmel,clk-output-range = <0 83000000>;
 					};
 
 					ssc1_clk: ssc1_clk {
 						#clock-cells = <0>;
 						reg = <39>;
-						atmel,clk-output-range = <0 66000000>;
+						atmel,clk-output-range = <0 83000000>;
 					};
 
 					sha_clk: sha_clk {
diff --git a/arch/arm/boot/dts/sama5d3_can.dtsi b/arch/arm/boot/dts/sama5d3_can.dtsi
index cf06a018ed0f..2470dd3fff25 100644
--- a/arch/arm/boot/dts/sama5d3_can.dtsi
+++ b/arch/arm/boot/dts/sama5d3_can.dtsi
@@ -36,13 +36,13 @@
 					can0_clk: can0_clk {
 						#clock-cells = <0>;
 						reg = <40>;
-						atmel,clk-output-range = <0 66000000>;
+						atmel,clk-output-range = <0 83000000>;
 					};
 
 					can1_clk: can1_clk {
 						#clock-cells = <0>;
 						reg = <41>;
-						atmel,clk-output-range = <0 66000000>;
+						atmel,clk-output-range = <0 83000000>;
 					};
 				};
 			};
diff --git a/arch/arm/boot/dts/sama5d3_tcb1.dtsi b/arch/arm/boot/dts/sama5d3_tcb1.dtsi
index 1584035daf51..215802b8db30 100644
--- a/arch/arm/boot/dts/sama5d3_tcb1.dtsi
+++ b/arch/arm/boot/dts/sama5d3_tcb1.dtsi
@@ -22,6 +22,7 @@
 					tcb1_clk: tcb1_clk {
 						#clock-cells = <0>;
 						reg = <27>;
+						atmel,clk-output-range = <0 166000000>;
 					};
 				};
 			};
diff --git a/arch/arm/boot/dts/sama5d3_uart.dtsi b/arch/arm/boot/dts/sama5d3_uart.dtsi
index 4316bdbdc25d..cb62adbd28ed 100644
--- a/arch/arm/boot/dts/sama5d3_uart.dtsi
+++ b/arch/arm/boot/dts/sama5d3_uart.dtsi
@@ -41,13 +41,13 @@
 					uart0_clk: uart0_clk {
 						#clock-cells = <0>;
 						reg = <16>;
-						atmel,clk-output-range = <0 66000000>;
+						atmel,clk-output-range = <0 83000000>;
 					};
 
 					uart1_clk: uart1_clk {
 						#clock-cells = <0>;
 						reg = <17>;
-						atmel,clk-output-range = <0 66000000>;
+						atmel,clk-output-range = <0 83000000>;
 					};
 				};
 			};
diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi
index 33836990b102..c134154bcce8 100644
--- a/arch/arm/boot/dts/sh73a0.dtsi
+++ b/arch/arm/boot/dts/sh73a0.dtsi
@@ -39,11 +39,18 @@
 		};
 	};
 
+	timer@f0000200 {
+		compatible = "arm,cortex-a9-global-timer";
+		reg = <0xf0000200 0x100>;
+		interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
+		clocks = <&periph_clk>;
+	};
+
 	timer@f0000600 {
 		compatible = "arm,cortex-a9-twd-timer";
 		reg = <0xf0000600 0x20>;
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
-		clocks = <&twd_clk>;
+		clocks = <&periph_clk>;
 	};
 
 	gic: interrupt-controller@f0001000 {
@@ -110,14 +117,14 @@
 			<0xe6900020 1>,
 			<0xe6900040 1>,
 			<0xe6900060 1>;
-		interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp5_clks SH73A0_CLK_INTCA0>;
 		power-domains = <&pd_a4s>;
 		control-parent;
@@ -132,14 +139,14 @@
 			<0xe6900024 1>,
 			<0xe6900044 1>,
 			<0xe6900064 1>;
-		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp5_clks SH73A0_CLK_INTCA0>;
 		power-domains = <&pd_a4s>;
 		control-parent;
@@ -154,14 +161,14 @@
 			<0xe6900028 1>,
 			<0xe6900048 1>,
 			<0xe6900068 1>;
-		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp5_clks SH73A0_CLK_INTCA0>;
 		power-domains = <&pd_a4s>;
 		control-parent;
@@ -176,14 +183,14 @@
 			<0xe690002c 1>,
 			<0xe690004c 1>,
 			<0xe690006c 1>;
-		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp5_clks SH73A0_CLK_INTCA0>;
 		power-domains = <&pd_a4s>;
 		control-parent;
@@ -194,10 +201,10 @@
 		#size-cells = <0>;
 		compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic";
 		reg = <0xe6820000 0x425>;
-		interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks SH73A0_CLK_IIC0>;
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
@@ -208,10 +215,10 @@
 		#size-cells = <0>;
 		compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic";
 		reg = <0xe6822000 0x425>;
-		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks SH73A0_CLK_IIC1>;
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
@@ -222,10 +229,10 @@
 		#size-cells = <0>;
 		compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic";
 		reg = <0xe6824000 0x425>;
-		interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks SH73A0_CLK_IIC2>;
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
@@ -236,10 +243,10 @@
 		#size-cells = <0>;
 		compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic";
 		reg = <0xe6826000 0x425>;
-		interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp4_clks SH73A0_CLK_IIC3>;
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
@@ -250,10 +257,10 @@
 		#size-cells = <0>;
 		compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic";
 		reg = <0xe6828000 0x425>;
-		interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp4_clks SH73A0_CLK_IIC4>;
 		power-domains = <&pd_c5>;
 		status = "disabled";
@@ -262,8 +269,8 @@
 	mmcif: mmc@e6bd0000 {
 		compatible = "renesas,mmcif-sh73a0", "renesas,sh-mmcif";
 		reg = <0xe6bd0000 0x100>;
-		interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks SH73A0_CLK_MMCIF0>;
 		power-domains = <&pd_a3sp>;
 		reg-io-width = <4>;
@@ -317,9 +324,9 @@
 	sdhi0: sd@ee100000 {
 		compatible = "renesas,sdhi-sh73a0";
 		reg = <0xee100000 0x100>;
-		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks SH73A0_CLK_SDHI0>;
 		power-domains = <&pd_a3sp>;
 		cap-sd-highspeed;
@@ -330,8 +337,8 @@
 	sdhi1: sd@ee120000 {
 		compatible = "renesas,sdhi-sh73a0";
 		reg = <0xee120000 0x100>;
-		interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks SH73A0_CLK_SDHI1>;
 		power-domains = <&pd_a3sp>;
 		disable-wp;
@@ -342,8 +349,8 @@
 	sdhi2: sd@ee140000 {
 		compatible = "renesas,sdhi-sh73a0";
 		reg = <0xee140000 0x100>;
-		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks SH73A0_CLK_SDHI2>;
 		power-domains = <&pd_a3sp>;
 		disable-wp;
@@ -612,19 +619,25 @@
 		extal2_clk: extal2 {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
+			/* This value must be overridden by the board. */
+			clock-frequency = <0>;
 		};
 		extcki_clk: extcki {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
+			/* This value can be overridden by the board. */
+			clock-frequency = <0>;
 		};
 		fsiack_clk: fsiack {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
+			/* This value can be overridden by the board. */
 			clock-frequency = <0>;
 		};
 		fsibck_clk: fsibck {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
+			/* This value can be overridden by the board. */
 			clock-frequency = <0>;
 		};
 
@@ -812,7 +825,7 @@
 			clock-div = <13>;
 			clock-mult = <1>;
 		};
-		twd_clk: twd {
+		periph_clk: periph {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks SH73A0_CLK_Z>;
 			#clock-cells = <0>;
diff --git a/arch/arm/boot/dts/ste-ab8500.dtsi b/arch/arm/boot/dts/ste-ab8500.dtsi
index 55fff4d44277..14d4d8617d75 100644
--- a/arch/arm/boot/dts/ste-ab8500.dtsi
+++ b/arch/arm/boot/dts/ste-ab8500.dtsi
@@ -6,6 +6,20 @@
 #include <dt-bindings/clock/ste-ab8500.h>
 
 / {
+	/* Essential housekeeping hardware monitors */
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&gpadc 0x02>, /* Battery temperature */
+			    <&gpadc 0x03>, /* Main charger voltage */
+			    <&gpadc 0x08>, /* Main battery voltage */
+			    <&gpadc 0x09>, /* VBUS */
+			    <&gpadc 0x0a>, /* Main charger current */
+			    <&gpadc 0x0b>, /* USB charger current */
+			    <&gpadc 0x0c>, /* Backup battery voltage */
+			    <&gpadc 0x0d>, /* Die temperature */
+			    <&gpadc 0x12>; /* Crystal temperature */
+	};
+
 	soc {
 		prcmu@80157000 {
 			ab8500 {
@@ -33,12 +47,84 @@
 					interrupt-names = "60S", "ALARM";
 				};
 
-				ab8500-gpadc {
+				gpadc: ab8500-gpadc {
 					compatible = "stericsson,ab8500-gpadc";
 					interrupts = <32 IRQ_TYPE_LEVEL_HIGH
 						      39 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "HW_CONV_END", "SW_CONV_END";
 					vddadc-supply = <&ab8500_ldo_tvout_reg>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#io-channel-cells = <1>;
+
+					/* GPADC channels */
+					bat_ctrl: channel@01 {
+						reg = <0x01>;
+					};
+					btemp_ball: channel@02 {
+						reg = <0x02>;
+					};
+					main_charger_v: channel@03 {
+						reg = <0x03>;
+					};
+					acc_detect1: channel@04 {
+						reg = <0x04>;
+					};
+					acc_detect2: channel@05 {
+						reg = <0x05>;
+					};
+					adc_aux1: channel@06 {
+						reg = <0x06>;
+					};
+					adc_aux2: channel@07 {
+						reg = <0x07>;
+					};
+					main_batt_v: channel@08 {
+						reg = <0x08>;
+					};
+					vbus_v: channel@09 {
+						reg = <0x09>;
+					};
+					main_charger_c: channel@0a {
+						reg = <0x0a>;
+					};
+					usb_charger_c: channel@0b {
+						reg = <0x0b>;
+					};
+					bk_bat_v: channel@0c {
+						reg = <0x0c>;
+					};
+					die_temp: channel@0d {
+						reg = <0x0d>;
+					};
+					usb_id: channel@0e {
+						reg = <0x0e>;
+					};
+					xtal_temp: channel@12 {
+						reg = <0x12>;
+					};
+					vbat_true_meas: channel@13 {
+						reg = <0x13>;
+					};
+					bat_ctrl_and_ibat: channel@1c {
+						reg = <0x1c>;
+					};
+					vbat_meas_and_ibat: channel@1d {
+						reg = <0x1d>;
+					};
+					vbat_true_meas_and_ibat: channel@1e {
+						reg = <0x1e>;
+					};
+					bat_temp_and_ibat: channel@1f {
+						reg = <0x1f>;
+					};
+				};
+
+				ab8500_temp {
+					compatible = "stericsson,abx500-temp";
+					io-channels = <&gpadc 0x06>,
+						      <&gpadc 0x07>;
+					io-channel-name = "aux1", "aux2";
 				};
 
 				ab8500_battery: ab8500_battery {
@@ -49,17 +135,31 @@
 				ab8500_fg {
 					compatible = "stericsson,ab8500-fg";
 					battery	   = <&ab8500_battery>;
+					io-channels = <&gpadc 0x08>;
+					io-channel-name = "main_bat_v";
 				};
 
 				ab8500_btemp {
 					compatible = "stericsson,ab8500-btemp";
 					battery	   = <&ab8500_battery>;
+					io-channels = <&gpadc 0x02>,
+						      <&gpadc 0x01>;
+					io-channel-name = "btemp_ball",
+							"bat_ctrl";
 				};
 
 				ab8500_charger {
 					compatible	= "stericsson,ab8500-charger";
 					battery		= <&ab8500_battery>;
 					vddadc-supply	= <&ab8500_ldo_tvout_reg>;
+					io-channels = <&gpadc 0x03>,
+						      <&gpadc 0x0a>,
+						      <&gpadc 0x09>,
+						      <&gpadc 0x0b>;
+					io-channel-name = "main_charger_v",
+							"main_charger_c",
+							"vbus_v",
+							"usb_charger_c";
 				};
 
 				ab8500_chargalg {
diff --git a/arch/arm/boot/dts/ste-ab8505.dtsi b/arch/arm/boot/dts/ste-ab8505.dtsi
new file mode 100644
index 000000000000..c72aa250bf6f
--- /dev/null
+++ b/arch/arm/boot/dts/ste-ab8505.dtsi
@@ -0,0 +1,275 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Linaro Ltd
+ */
+
+#include <dt-bindings/clock/ste-ab8500.h>
+
+/ {
+	/* Essential housekeeping hardware monitors */
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&gpadc 0x02>, /* Battery temperature */
+			      <&gpadc 0x08>, /* Main battery voltage */
+			      <&gpadc 0x09>, /* VBUS */
+			      <&gpadc 0x0b>, /* Charger current */
+			      <&gpadc 0x0c>; /* Backup battery voltage */
+	};
+
+	soc {
+		prcmu@80157000 {
+			ab8505 {
+				compatible = "stericsson,ab8505";
+				interrupt-parent = <&intc>;
+				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				ab8500_clock: clock-controller {
+					compatible = "stericsson,ab8500-clk";
+					#clock-cells = <1>;
+				};
+
+				ab8505_gpio: ab8505-gpio {
+					compatible = "stericsson,ab8505-gpio";
+					gpio-controller;
+					#gpio-cells = <2>;
+				};
+
+				ab8500-rtc {
+					compatible = "stericsson,ab8500-rtc";
+					interrupts = <17 IRQ_TYPE_LEVEL_HIGH
+						      18 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "60S", "ALARM";
+				};
+
+				gpadc: ab8500-gpadc {
+					compatible = "stericsson,ab8500-gpadc";
+					interrupts = <32 IRQ_TYPE_LEVEL_HIGH
+						      39 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "HW_CONV_END", "SW_CONV_END";
+					vddadc-supply = <&ab8500_ldo_adc_reg>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#io-channel-cells = <1>;
+
+					/* GPADC channels */
+					bat_ctrl: channel@01 {
+						reg = <0x01>;
+					};
+					btemp_ball: channel@02 {
+						reg = <0x02>;
+					};
+					acc_detect1: channel@04 {
+						reg = <0x04>;
+					};
+					acc_detect2: channel@05 {
+						reg = <0x05>;
+					};
+					adc_aux1: channel@06 {
+						reg = <0x06>;
+					};
+					adc_aux2: channel@07 {
+						reg = <0x07>;
+					};
+					main_batt_v: channel@08 {
+						reg = <0x08>;
+					};
+					vbus_v: channel@09 {
+						reg = <0x09>;
+					};
+					charger_c: channel@0b {
+						reg = <0x0b>;
+					};
+					bk_bat_v: channel@0c {
+						reg = <0x0c>;
+					};
+					usb_id: channel@0e {
+						reg = <0x0e>;
+					};
+				};
+
+				ab8500_battery: ab8500_battery {
+					status = "disabled";
+					thermistor-on-batctrl;
+				};
+
+				ab8500_fg {
+					status = "disabled";
+					compatible = "stericsson,ab8500-fg";
+					battery = <&ab8500_battery>;
+					io-channels = <&gpadc 0x08>;
+					io-channel-name = "main_bat_v";
+				};
+
+				ab8500_btemp {
+					status = "disabled";
+					compatible = "stericsson,ab8500-btemp";
+					battery = <&ab8500_battery>;
+					io-channels = <&gpadc 0x02>,
+						      <&gpadc 0x01>;
+					io-channel-name = "btemp_ball",
+							  "bat_ctrl";
+				};
+
+				ab8500_charger {
+					status = "disabled";
+					compatible = "stericsson,ab8500-charger";
+					battery = <&ab8500_battery>;
+					vddadc-supply = <&ab8500_ldo_adc_reg>;
+					io-channels = <&gpadc 0x09>,
+						      <&gpadc 0x0b>;
+					io-channel-name = "vbus_v",
+							  "usb_charger_c";
+				};
+
+				ab8500_chargalg {
+					status = "disabled";
+					compatible = "stericsson,ab8500-chargalg";
+					battery = <&ab8500_battery>;
+				};
+
+				ab8500_usb: ab8500_usb {
+					compatible = "stericsson,ab8500-usb";
+					interrupts = < 90 IRQ_TYPE_LEVEL_HIGH
+						       96 IRQ_TYPE_LEVEL_HIGH
+						       14 IRQ_TYPE_LEVEL_HIGH
+						       15 IRQ_TYPE_LEVEL_HIGH
+						       79 IRQ_TYPE_LEVEL_HIGH
+						       74 IRQ_TYPE_LEVEL_HIGH
+						       75 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "ID_WAKEUP_R",
+							  "ID_WAKEUP_F",
+							  "VBUS_DET_F",
+							  "VBUS_DET_R",
+							  "USB_LINK_STATUS",
+							  "USB_ADP_PROBE_PLUG",
+							  "USB_ADP_PROBE_UNPLUG";
+					vddulpivio18-supply = <&ab8500_ldo_intcore_reg>;
+					v-ape-supply = <&db8500_vape_reg>;
+					musb_1v8-supply = <&db8500_vsmps2_reg>;
+					clocks = <&prcmu_clk PRCMU_SYSCLK>;
+					clock-names = "sysclk";
+				};
+
+				ab8500-ponkey {
+					compatible = "stericsson,ab8500-poweron-key";
+					interrupts = <6 IRQ_TYPE_LEVEL_HIGH
+						      7 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "ONKEY_DBF", "ONKEY_DBR";
+				};
+
+				ab8500-sysctrl {
+					compatible = "stericsson,ab8500-sysctrl";
+				};
+
+				ab8500-pwm {
+					compatible = "stericsson,ab8500-pwm";
+					clocks = <&ab8500_clock AB8500_SYSCLK_INT>;
+					clock-names = "intclk";
+				};
+
+				ab8500-debugfs {
+					compatible = "stericsson,ab8500-debug";
+				};
+
+				codec: ab8500-codec {
+					compatible = "stericsson,ab8500-codec";
+
+					V-AUD-supply = <&ab8500_ldo_audio_reg>;
+					V-AMIC1-supply = <&ab8500_ldo_anamic1_reg>;
+					V-AMIC2-supply = <&ab8500_ldo_anamic2_reg>;
+
+					clocks = <&ab8500_clock AB8500_SYSCLK_AUDIO>;
+					clock-names = "audioclk";
+
+					stericsson,earpeice-cmv = <950>; /* Units in mV. */
+				};
+
+				ab8505-regulators {
+					compatible = "stericsson,ab8505-regulator";
+
+					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
+						regulator-min-microvolt = <2800000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
+						regulator-min-microvolt = <1100000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
+						regulator-min-microvolt = <1100000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					ab8500_ldo_aux4_reg: ab8500_ldo_aux4 {
+						regulator-min-microvolt = <1100000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					ab8500_ldo_aux5_reg: ab8500_ldo_aux5 {
+						regulator-min-microvolt = <1050000>;
+						regulator-max-microvolt = <2790000>;
+					};
+
+					ab8500_ldo_aux6_reg: ab8500_ldo_aux6 {
+						regulator-min-microvolt = <1050000>;
+						regulator-max-microvolt = <2790000>;
+					};
+
+					// supply for v-intcore12; VINTCORE12 LDO
+					ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
+						regulator-min-microvolt = <1250000>;
+						regulator-max-microvolt = <1350000>;
+					};
+
+					// supply for gpadc; ADC LDO
+					ab8500_ldo_adc_reg: ab8500_ldo_adc {
+					};
+
+					// supply for ab8500-vaudio; VAUDIO LDO
+					ab8500_ldo_audio_reg: ab8500_ldo_audio {
+					};
+
+					// supply for v-anamic1 VAMIC1 LDO
+					ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
+					};
+
+					// supply for v-amic2; VAMIC2 LDO; reuse constants for AMIC1
+					ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
+					};
+
+					// supply for v-aux8; VAUX8 LDO
+					ab8500_ldo_aux8_reg: ab8500_ldo_aux8 {
+					};
+
+					// supply for U8500 CSI/DSI; VANA LDO
+					ab8500_ldo_ana_reg: ab8500_ldo_ana {
+					};
+				};
+			};
+		};
+
+		sound {
+			stericsson,audio-codec = <&codec>;
+			clocks = <&prcmu_clk PRCMU_SYSCLK>, <&ab8500_clock AB8500_SYSCLK_ULP>, <&ab8500_clock AB8500_SYSCLK_INT>;
+			clock-names = "sysclk", "ulpclk", "intclk";
+		};
+
+		mcde@a0350000 {
+			vana-supply = <&ab8500_ldo_ana_reg>;
+
+			dsi@a0351000 {
+				vana-supply = <&ab8500_ldo_ana_reg>;
+			};
+			dsi@a0352000 {
+				vana-supply = <&ab8500_ldo_ana_reg>;
+			};
+			dsi@a0353000 {
+				vana-supply = <&ab8500_ldo_ana_reg>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ste-db8500.dtsi b/arch/arm/boot/dts/ste-db8500.dtsi
new file mode 100644
index 000000000000..d309fad32229
--- /dev/null
+++ b/arch/arm/boot/dts/ste-db8500.dtsi
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "ste-dbx5x0.dtsi"
+
+/ {
+	cpus {
+		cpu@300 {
+			/* cpufreq controls */
+			operating-points = <998400 0
+					    800000 0
+					    400000 0
+					    200000 0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ste-db8520.dtsi b/arch/arm/boot/dts/ste-db8520.dtsi
new file mode 100644
index 000000000000..48bd8728ae27
--- /dev/null
+++ b/arch/arm/boot/dts/ste-db8520.dtsi
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "ste-dbx5x0.dtsi"
+
+/ {
+	cpus {
+		cpu@300 {
+			/* cpufreq controls */
+			operating-points = <1152000 0
+					    800000 0
+					    400000 0
+					    200000 0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi b/arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi
new file mode 100644
index 000000000000..7bf7a2d34cbc
--- /dev/null
+++ b/arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi
@@ -0,0 +1,632 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Linaro Ltd.
+ */
+
+#include "ste-nomadik-pinctrl.dtsi"
+
+&pinctrl {
+	/* Settings for all UART default and sleep states */
+	uart0 {
+		u0_a_1_default: u0_a_1_default {
+			default_mux {
+				function = "u0";
+				groups = "u0_a_1";
+			};
+			default_cfg1 {
+				pins = "GPIO0_AJ5", "GPIO2_AH4"; /* CTS+RXD */
+				ste,config = <&in_pu>;
+			};
+			default_cfg2 {
+				pins = "GPIO1_AJ3", "GPIO3_AH3"; /* RTS+TXD */
+				ste,config = <&out_hi>;
+			};
+		};
+
+		u0_a_1_sleep: u0_a_1_sleep {
+			sleep_cfg1 {
+				pins = "GPIO0_AJ5", "GPIO2_AH4"; /* CTS+RXD */
+				ste,config = <&slpm_in_wkup_pdis>;
+			};
+			sleep_cfg2 {
+				pins = "GPIO1_AJ3"; /* RTS */
+				ste,config = <&slpm_out_hi_wkup_pdis>;
+			};
+			sleep_cfg3 {
+				pins = "GPIO3_AH3"; /* TXD */
+				ste,config = <&slpm_out_wkup_pdis>;
+			};
+		};
+	};
+
+	uart1 {
+		u1rxtx_a_1_default: u1rxtx_a_1_default {
+			default_mux {
+				function = "u1";
+				groups = "u1rxtx_a_1";
+			};
+			default_cfg1 {
+				pins = "GPIO4_AH6"; /* RXD */
+				ste,config = <&in_pu>;
+			};
+			default_cfg2 {
+				pins = "GPIO5_AG6"; /* TXD */
+				ste,config = <&out_hi>;
+			};
+		};
+
+		u1rxtx_a_1_sleep: u1rxtx_a_1_sleep {
+			sleep_cfg1 {
+				pins = "GPIO4_AH6"; /* RXD */
+				ste,config = <&slpm_in_wkup_pdis>;
+			};
+			sleep_cfg2 {
+				pins = "GPIO5_AG6"; /* TXD */
+				ste,config = <&slpm_out_wkup_pdis>;
+			};
+		};
+
+		u1ctsrts_a_1_default: u1ctsrts_a_1_default {
+			default_mux {
+				function = "u1";
+				groups = "u1ctsrts_a_1";
+			};
+			default_cfg1 {
+				pins = "GPIO6_AF6"; /* CTS */
+				ste,config = <&in_pu>;
+			};
+			default_cfg2 {
+				pins = "GPIO7_AG5"; /* RTS */
+				ste,config = <&out_hi>;
+			};
+		};
+
+		u1ctsrts_a_1_sleep: u1ctsrts_a_1_sleep {
+			sleep_cfg1 {
+				pins = "GPIO6_AF6"; /* CTS */
+				ste,config = <&slpm_in_wkup_pdis>;
+			};
+			sleep_cfg2 {
+				pins = "GPIO7_AG5"; /* RTS */
+				ste,config = <&slpm_out_hi_wkup_pdis>;
+			};
+		};
+	};
+
+	uart2 {
+		u2rxtx_c_1_default: u2rxtx_c_1_default {
+			default_mux {
+				function = "u2";
+				groups = "u2rxtx_c_1";
+			};
+			default_cfg1 {
+				pins = "GPIO29_W2"; /* RXD */
+				ste,config = <&in_pu>;
+			};
+			default_cfg2 {
+				pins = "GPIO30_W3"; /* TXD */
+				ste,config = <&out_hi>;
+			};
+		};
+
+		u2rxtx_c_1_sleep: u2rxtx_c_1_sleep {
+			sleep_cfg1 {
+				pins = "GPIO29_W2"; /* RXD */
+				ste,config = <&in_wkup_pdis>;
+			};
+			sleep_cfg2 {
+				pins = "GPIO30_W3"; /* TXD */
+				ste,config = <&out_wkup_pdis>;
+			};
+		};
+	};
+
+	/* Settings for all I2C default and sleep states */
+	i2c0 {
+		i2c0_a_1_default: i2c0_a_1_default {
+			default_mux {
+				function = "i2c0";
+				groups = "i2c0_a_1";
+			};
+			default_cfg1 {
+				pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */
+				ste,config = <&in_nopull>;
+			};
+		};
+
+		i2c0_a_1_sleep: i2c0_a_1_sleep {
+			sleep_cfg1 {
+				pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */
+				ste,config = <&slpm_in_wkup_pdis>;
+			};
+		};
+	};
+
+	i2c1 {
+		i2c1_b_2_default: i2c1_b_2_default {
+			default_mux {
+				function = "i2c1";
+				groups = "i2c1_b_2";
+			};
+			default_cfg1 {
+				pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */
+				ste,config = <&in_nopull>;
+			};
+		};
+
+		i2c1_b_2_sleep: i2c1_b_2_sleep {
+			sleep_cfg1 {
+				pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */
+				ste,config = <&slpm_in_wkup_pdis>;
+			};
+		};
+	};
+
+	i2c2 {
+		i2c2_b_2_default: i2c2_b_2_default {
+			default_mux {
+				function = "i2c2";
+				groups = "i2c2_b_2";
+			};
+			default_cfg1 {
+				pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */
+				ste,config = <&in_nopull>;
+			};
+		};
+
+		i2c2_b_2_sleep: i2c2_b_2_sleep {
+			sleep_cfg1 {
+				pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */
+				ste,config = <&slpm_in_wkup_pdis>;
+			};
+		};
+	};
+
+	i2c3 {
+		i2c3_c_2_default: i2c3_c_2_default {
+			default_mux {
+				function = "i2c3";
+				groups = "i2c3_c_2";
+			};
+			default_cfg1 {
+				pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */
+				ste,config = <&in_nopull>;
+			};
+		};
+
+		i2c3_c_2_sleep: i2c3_c_2_sleep {
+			sleep_cfg1 {
+				pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */
+				ste,config = <&slpm_in_wkup_pdis>;
+			};
+		};
+	};
+
+	/*
+	 * Activating I2C4 will conflict with UART1 about the same pins so do not
+	 * enable I2C4 and UART1 at the same time.
+	 */
+	i2c4 {
+		i2c4_b_1_default: i2c4_b_1_default {
+			default_mux {
+				function = "i2c4";
+				groups = "i2c4_b_1";
+			};
+			default_cfg1 {
+				pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */
+				ste,config = <&in_nopull>;
+			};
+		};
+
+		i2c4_b_1_sleep: i2c4_b_1_sleep {
+			sleep_cfg1 {
+				pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */
+				ste,config = <&slpm_in_wkup_pdis>;
+			};
+		};
+	};
+
+	/* Settings for all MMC/SD/SDIO default and sleep states */
+	sdi0 {
+		/* This is the external SD card slot, 4 bits wide */
+		mc0_a_1_default: mc0_a_1_default {
+			default_mux {
+				function = "mc0";
+				groups = "mc0_a_1";
+			};
+			default_cfg1 {
+				pins =
+				"GPIO18_AC2", /* CMDDIR */
+				"GPIO19_AC1", /* DAT0DIR */
+				"GPIO20_AB4"; /* DAT2DIR */
+				ste,config = <&out_hi>;
+			};
+			default_cfg2 {
+				pins = "GPIO22_AA3"; /* FBCLK */
+				ste,config = <&in_nopull>;
+			};
+			default_cfg3 {
+				pins = "GPIO23_AA4"; /* CLK */
+				ste,config = <&out_lo>;
+			};
+			default_cfg4 {
+				pins =
+				"GPIO24_AB2", /* CMD */
+				"GPIO25_Y4", /* DAT0 */
+				"GPIO26_Y2", /* DAT1 */
+				"GPIO27_AA2", /* DAT2 */
+				"GPIO28_AA1"; /* DAT3 */
+				ste,config = <&in_pu>;
+			};
+		};
+
+		mc0_a_1_sleep: mc0_a_1_sleep {
+			sleep_cfg1 {
+				pins =
+				"GPIO18_AC2", /* CMDDIR */
+				"GPIO19_AC1", /* DAT0DIR */
+				"GPIO20_AB4"; /* DAT2DIR */
+				ste,config = <&slpm_out_hi_wkup_pdis>;
+			};
+			sleep_cfg2 {
+				pins =
+				"GPIO22_AA3", /* FBCLK */
+				"GPIO24_AB2", /* CMD */
+				"GPIO25_Y4", /* DAT0 */
+				"GPIO26_Y2", /* DAT1 */
+				"GPIO27_AA2", /* DAT2 */
+				"GPIO28_AA1"; /* DAT3 */
+				ste,config = <&slpm_in_wkup_pdis>;
+			};
+			sleep_cfg3 {
+				pins = "GPIO23_AA4"; /* CLK */
+				ste,config = <&slpm_out_lo_wkup_pdis>;
+			};
+		};
+
+		mc0_a_2_default: mc0_a_2_default {
+			default_mux {
+				function = "mc0";
+				groups = "mc0_a_2";
+			};
+			default_cfg1 {
+				pins = "GPIO22_AA3"; /* FBCLK */
+				ste,config = <&in_nopull>;
+			};
+			default_cfg2 {
+				pins = "GPIO23_AA4"; /* CLK */
+				ste,config = <&out_lo>;
+			};
+			default_cfg3 {
+				pins =
+				"GPIO24_AB2", /* CMD */
+				"GPIO25_Y4", /* DAT0 */
+				"GPIO26_Y2", /* DAT1 */
+				"GPIO27_AA2", /* DAT2 */
+				"GPIO28_AA1"; /* DAT3 */
+				ste,config = <&in_pu>;
+			};
+		};
+
+		mc0_a_2_sleep: mc0_a_2_sleep {
+			sleep_cfg1 {
+				pins =
+				"GPIO22_AA3", /* FBCLK */
+				"GPIO24_AB2", /* CMD */
+				"GPIO25_Y4", /* DAT0 */
+				"GPIO26_Y2", /* DAT1 */
+				"GPIO27_AA2", /* DAT2 */
+				"GPIO28_AA1"; /* DAT3 */
+				ste,config = <&slpm_in_wkup_pdis>;
+			};
+			sleep_cfg2 {
+				pins = "GPIO23_AA4"; /* CLK */
+				ste,config = <&slpm_out_lo_wkup_pdis>;
+			};
+		};
+	};
+
+	sdi1 {
+		/* This is the WLAN SDIO 4 bits wide */
+		mc1_a_1_default: mc1_a_1_default {
+			default_mux {
+				function = "mc1";
+				groups = "mc1_a_1";
+			};
+			default_cfg1 {
+				pins = "GPIO208_AH16"; /* CLK */
+				ste,config = <&out_lo>;
+			};
+			default_cfg2 {
+				pins = "GPIO209_AG15"; /* FBCLK */
+				ste,config = <&in_nopull>;
+			};
+			default_cfg3 {
+				pins =
+				"GPIO210_AJ15", /* CMD */
+				"GPIO211_AG14", /* DAT0 */
+				"GPIO212_AF13", /* DAT1 */
+				"GPIO213_AG13", /* DAT2 */
+				"GPIO214_AH15"; /* DAT3 */
+				ste,config = <&in_pu>;
+			};
+		};
+
+		mc1_a_1_sleep: mc1_a_1_sleep {
+			sleep_cfg1 {
+				pins = "GPIO208_AH16"; /* CLK */
+				ste,config = <&slpm_out_lo_wkup_pdis>;
+			};
+			sleep_cfg2 {
+				pins =
+				"GPIO209_AG15", /* FBCLK */
+				"GPIO210_AJ15", /* CMD */
+				"GPIO211_AG14", /* DAT0 */
+				"GPIO212_AF13", /* DAT1 */
+				"GPIO213_AG13", /* DAT2 */
+				"GPIO214_AH15"; /* DAT3 */
+				ste,config = <&slpm_in_wkup_pdis>;
+			};
+		};
+
+		mc1_a_2_default: mc1_a_2_default {
+			default_mux {
+				function = "mc1";
+				groups = "mc1_a_2";
+			};
+			default_cfg1 {
+				pins = "GPIO208_AH16"; /* CLK */
+				ste,config = <&out_lo>;
+			};
+			default_cfg2 {
+				pins =
+				"GPIO210_AJ15", /* CMD */
+				"GPIO211_AG14", /* DAT0 */
+				"GPIO212_AF13", /* DAT1 */
+				"GPIO213_AG13", /* DAT2 */
+				"GPIO214_AH15"; /* DAT3 */
+				ste,config = <&in_pu>;
+			};
+		};
+
+		mc1_a_2_sleep: mc1_a_2_sleep {
+			sleep_cfg1 {
+				pins = "GPIO208_AH16"; /* CLK */
+				ste,config = <&slpm_out_lo_wkup_pdis>;
+			};
+			sleep_cfg2 {
+				pins =
+				"GPIO210_AJ15", /* CMD */
+				"GPIO211_AG14", /* DAT0 */
+				"GPIO212_AF13", /* DAT1 */
+				"GPIO213_AG13", /* DAT2 */
+				"GPIO214_AH15"; /* DAT3 */
+				ste,config = <&slpm_in_wkup_pdis>;
+			};
+		};
+	};
+
+	sdi2 {
+		/* This is the eMMC 8 bits wide, usually PoP eMMC */
+		mc2_a_1_default: mc2_a_1_default {
+			default_mux {
+				function = "mc2";
+				groups = "mc2_a_1";
+			};
+			default_cfg1 {
+				pins = "GPIO128_A5"; /* CLK */
+				ste,config = <&out_lo>;
+			};
+			default_cfg2 {
+				pins = "GPIO130_C8"; /* FBCLK */
+				ste,config = <&in_nopull>;
+			};
+			default_cfg3 {
+				pins =
+				"GPIO129_B4", /* CMD */
+				"GPIO131_A12", /* DAT0 */
+				"GPIO132_C10", /* DAT1 */
+				"GPIO133_B10", /* DAT2 */
+				"GPIO134_B9", /* DAT3 */
+				"GPIO135_A9", /* DAT4 */
+				"GPIO136_C7", /* DAT5 */
+				"GPIO137_A7", /* DAT6 */
+				"GPIO138_C5"; /* DAT7 */
+				ste,config = <&in_pu>;
+			};
+		};
+
+		mc2_a_1_sleep: mc2_a_1_sleep {
+			sleep_cfg1 {
+				pins = "GPIO128_A5"; /* CLK */
+				ste,config = <&out_lo_wkup_pdis>;
+			};
+			sleep_cfg2 {
+				pins =
+				"GPIO130_C8", /* FBCLK */
+				"GPIO129_B4"; /* CMD */
+				ste,config = <&in_wkup_pdis_en>;
+			};
+			sleep_cfg3 {
+				pins =
+				"GPIO131_A12", /* DAT0 */
+				"GPIO132_C10", /* DAT1 */
+				"GPIO133_B10", /* DAT2 */
+				"GPIO134_B9", /* DAT3 */
+				"GPIO135_A9", /* DAT4 */
+				"GPIO136_C7", /* DAT5 */
+				"GPIO137_A7", /* DAT6 */
+				"GPIO138_C5"; /* DAT7 */
+				ste,config = <&in_wkup_pdis>;
+			};
+		};
+	};
+
+	sdi4 {
+		/* This is the eMMC 8 bits wide, usually PCB-mounted eMMC */
+		mc4_a_1_default: mc4_a_1_default {
+			default_mux {
+				function = "mc4";
+				groups = "mc4_a_1";
+			};
+			default_cfg1 {
+				pins = "GPIO203_AE23"; /* CLK */
+				ste,config = <&out_lo>;
+			};
+			default_cfg2 {
+				pins = "GPIO202_AF25"; /* FBCLK */
+				ste,config = <&in_nopull>;
+			};
+			default_cfg3 {
+				pins =
+				"GPIO201_AF24", /* CMD */
+				"GPIO200_AH26", /* DAT0 */
+				"GPIO199_AH23", /* DAT1 */
+				"GPIO198_AG25", /* DAT2 */
+				"GPIO197_AH24", /* DAT3 */
+				"GPIO207_AJ23", /* DAT4 */
+				"GPIO206_AG24", /* DAT5 */
+				"GPIO205_AG23", /* DAT6 */
+				"GPIO204_AF23"; /* DAT7 */
+				ste,config = <&in_pu>;
+			};
+		};
+
+		mc4_a_1_sleep: mc4_a_1_sleep {
+			sleep_cfg1 {
+				pins = "GPIO203_AE23"; /* CLK */
+				ste,config = <&out_lo_wkup_pdis>;
+			};
+			sleep_cfg2 {
+				pins =
+				"GPIO202_AF25", /* FBCLK */
+				"GPIO201_AF24", /* CMD */
+				"GPIO200_AH26", /* DAT0 */
+				"GPIO199_AH23", /* DAT1 */
+				"GPIO198_AG25", /* DAT2 */
+				"GPIO197_AH24", /* DAT3 */
+				"GPIO207_AJ23", /* DAT4 */
+				"GPIO206_AG24", /* DAT5 */
+				"GPIO205_AG23", /* DAT6 */
+				"GPIO204_AF23"; /* DAT7 */
+				ste,config = <&slpm_in_wkup_pdis>;
+			};
+		};
+	};
+
+	/*
+	 * Multi-rate serial ports (MSPs) - MSP3 output is internal and
+	 * cannot be muxed onto any pins.
+	 */
+	msp0 {
+		msp0txrxtfstck_a_1_default: msp0txrxtfstck_a_1_default {
+			default_msp0_mux {
+				function = "msp0";
+				groups = "msp0txrx_a_1", "msp0tfstck_a_1";
+			};
+			default_msp0_cfg {
+				pins =
+				"GPIO12_AC4", /* TXD */
+				"GPIO15_AC3", /* RXD */
+				"GPIO13_AF3", /* TFS */
+				"GPIO14_AE3"; /* TCK */
+				ste,config = <&in_nopull>;
+			};
+		};
+	};
+
+	msp1 {
+		msp1txrx_a_1_default: msp1txrx_a_1_default {
+			default_mux {
+				function = "msp1";
+				groups = "msp1txrx_a_1", "msp1_a_1";
+			};
+			default_cfg1 {
+				pins = "GPIO33_AF2";
+				ste,config = <&out_lo>;
+			};
+			default_cfg2 {
+				pins =
+				"GPIO34_AE1",
+				"GPIO35_AE2",
+				"GPIO36_AG2";
+				ste,config = <&in_nopull>;
+			};
+		};
+	};
+
+	msp2 {
+		msp2_a_1_default: msp2_a_1_default {
+			/* MSP2 usually used for HDMI audio */
+			default_mux {
+				function = "msp2";
+				groups = "msp2_a_1";
+			};
+			default_cfg1 {
+				pins =
+				"GPIO193_AH27", /* TXD */
+				"GPIO194_AF27", /* TCK */
+				"GPIO195_AG28"; /* TFS */
+				ste,config = <&in_pd>;
+			};
+			default_cfg2 {
+				pins = "GPIO196_AG26"; /* RXD */
+				ste,config = <&out_lo>;
+			};
+		};
+	};
+
+	musb {
+		usb_a_1_default: usb_a_1_default {
+			default_mux {
+				function = "usb";
+				groups = "usb_a_1";
+			};
+			default_cfg1 {
+				pins =
+				"GPIO256_AF28", /* NXT */
+				"GPIO258_AD29", /* XCLK */
+				"GPIO259_AC29", /* DIR */
+				"GPIO260_AD28", /* DAT7 */
+				"GPIO261_AD26", /* DAT6 */
+				"GPIO262_AE26", /* DAT5 */
+				"GPIO263_AG29", /* DAT4 */
+				"GPIO264_AE27", /* DAT3 */
+				"GPIO265_AD27", /* DAT2 */
+				"GPIO266_AC28", /* DAT1 */
+				"GPIO267_AC27"; /* DAT0 */
+				ste,config = <&in_nopull>;
+			};
+			default_cfg2 {
+				pins = "GPIO257_AE29"; /* STP */
+				ste,config = <&out_hi>;
+			};
+		};
+
+		usb_a_1_sleep: usb_a_1_sleep {
+			sleep_cfg1 {
+				pins =
+				"GPIO256_AF28", /* NXT */
+				"GPIO258_AD29", /* XCLK */
+				"GPIO259_AC29"; /* DIR */
+				ste,config = <&slpm_wkup_pdis_en>;
+			};
+			sleep_cfg2 {
+				pins = "GPIO257_AE29"; /* STP */
+				ste,config = <&slpm_out_hi_wkup_pdis>;
+			};
+			sleep_cfg3 {
+				pins =
+				"GPIO260_AD28", /* DAT7 */
+				"GPIO261_AD26", /* DAT6 */
+				"GPIO262_AE26", /* DAT5 */
+				"GPIO263_AG29", /* DAT4 */
+				"GPIO264_AE27", /* DAT3 */
+				"GPIO265_AD27", /* DAT2 */
+				"GPIO266_AC28", /* DAT1 */
+				"GPIO267_AC27"; /* DAT0 */
+				ste,config = <&slpm_in_wkup_pdis_en>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
index bda454d12150..6671f74c9f03 100644
--- a/arch/arm/boot/dts/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -14,6 +14,22 @@
 	#address-cells = <1>;
 	#size-cells = <1>;
 
+	/* This stablilizes the device enumeration */
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		spi2 = &spi2;
+		spi3 = &spi3;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+	};
+
 	chosen {
 	};
 
@@ -36,11 +52,6 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0x300>;
-			/* cpufreq controls */
-			operating-points = <998400 0
-					    800000 0
-					    400000 0
-					    200000 0>;
 			clocks = <&prcmu_clk PRCMU_ARMSS>;
 			clock-names = "cpu";
 			clock-latency = <20000>;
@@ -93,7 +104,7 @@
 	soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "stericsson,db8500";
+		compatible = "stericsson,db8500", "simple-bus";
 		interrupt-parent = <&intc>;
 		ranges;
 
@@ -324,7 +335,7 @@
 		};
 
 		rtc@80154000 {
-			compatible = "arm,rtc-pl031", "arm,primecell";
+			compatible = "arm,pl031", "arm,primecell";
 			reg = <0x80154000 0x1000>;
 			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
 
@@ -638,7 +649,7 @@
 			};
 		};
 
-		i2c@80004000 {
+		i2c0: i2c@80004000 {
 			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
 			reg = <0x80004000 0x1000>;
 			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
@@ -651,9 +662,11 @@
 			clocks = <&prcc_kclk 3 3>, <&prcc_pclk 3 3>;
 			clock-names = "i2cclk", "apb_pclk";
 			power-domains = <&pm_domains DOMAIN_VAPE>;
+
+			status = "disabled";
 		};
 
-		i2c@80122000 {
+		i2c1: i2c@80122000 {
 			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
 			reg = <0x80122000 0x1000>;
 			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
@@ -667,9 +680,11 @@
 			clocks = <&prcc_kclk 1 2>, <&prcc_pclk 1 2>;
 			clock-names = "i2cclk", "apb_pclk";
 			power-domains = <&pm_domains DOMAIN_VAPE>;
+
+			status = "disabled";
 		};
 
-		i2c@80128000 {
+		i2c2: i2c@80128000 {
 			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
 			reg = <0x80128000 0x1000>;
 			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
@@ -683,9 +698,11 @@
 			clocks = <&prcc_kclk 1 6>, <&prcc_pclk 1 6>;
 			clock-names = "i2cclk", "apb_pclk";
 			power-domains = <&pm_domains DOMAIN_VAPE>;
+
+			status = "disabled";
 		};
 
-		i2c@80110000 {
+		i2c3: i2c@80110000 {
 			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
 			reg = <0x80110000 0x1000>;
 			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
@@ -699,9 +716,11 @@
 			clocks = <&prcc_kclk 2 0>, <&prcc_pclk 2 0>;
 			clock-names = "i2cclk", "apb_pclk";
 			power-domains = <&pm_domains DOMAIN_VAPE>;
+
+			status = "disabled";
 		};
 
-		i2c@8012a000 {
+		i2c4: i2c@8012a000 {
 			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
 			reg = <0x8012a000 0x1000>;
 			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
@@ -715,9 +734,11 @@
 			clocks = <&prcc_kclk 1 9>, <&prcc_pclk 1 10>;
 			clock-names = "i2cclk", "apb_pclk";
 			power-domains = <&pm_domains DOMAIN_VAPE>;
+
+			status = "disabled";
 		};
 
-		spi@80002000 {
+		ssp0: spi@80002000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x80002000 0x1000>;
 			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
@@ -729,9 +750,11 @@
 			       <&dma 8 0 0x0>; /* Logical - MemToDev */
 			dma-names = "rx", "tx";
 			power-domains = <&pm_domains DOMAIN_VAPE>;
+
+			status = "disabled";
 		};
 
-		spi@80003000 {
+		ssp1: spi@80003000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x80003000 0x1000>;
 			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
@@ -743,9 +766,11 @@
 			       <&dma 9 0 0x0>; /* Logical - MemToDev */
 			dma-names = "rx", "tx";
 			power-domains = <&pm_domains DOMAIN_VAPE>;
+
+			status = "disabled";
 		};
 
-		spi@8011a000 {
+		spi0: spi@8011a000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x8011a000 0x1000>;
 			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
@@ -758,9 +783,11 @@
 			       <&dma 0 0 0x0>; /* Logical - MemToDev */
 			dma-names = "rx", "tx";
 			power-domains = <&pm_domains DOMAIN_VAPE>;
+
+			status = "disabled";
 		};
 
-		spi@80112000 {
+		spi1: spi@80112000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x80112000 0x1000>;
 			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
@@ -773,9 +800,11 @@
 			       <&dma 35 0 0x0>; /* Logical - MemToDev */
 			dma-names = "rx", "tx";
 			power-domains = <&pm_domains DOMAIN_VAPE>;
+
+			status = "disabled";
 		};
 
-		spi@80111000 {
+		spi2: spi@80111000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x80111000 0x1000>;
 			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
@@ -788,9 +817,11 @@
 			       <&dma 33 0 0x0>; /* Logical - MemToDev */
 			dma-names = "rx", "tx";
 			power-domains = <&pm_domains DOMAIN_VAPE>;
+
+			status = "disabled";
 		};
 
-		spi@80129000 {
+		spi3: spi@80129000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x80129000 0x1000>;
 			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
@@ -803,9 +834,11 @@
 			       <&dma 40 0 0x0>; /* Logical - MemToDev */
 			dma-names = "rx", "tx";
 			power-domains = <&pm_domains DOMAIN_VAPE>;
+
+			status = "disabled";
 		};
 
-		ux500_serial0: uart@80120000 {
+		serial0: uart@80120000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x80120000 0x1000>;
 			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
@@ -820,7 +853,7 @@
 			status = "disabled";
 		};
 
-		ux500_serial1: uart@80121000 {
+		serial1: uart@80121000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x80121000 0x1000>;
 			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
@@ -835,7 +868,7 @@
 			status = "disabled";
 		};
 
-		ux500_serial2: uart@80007000 {
+		serial2: uart@80007000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x80007000 0x1000>;
 			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/ste-href-ab8505.dtsi b/arch/arm/boot/dts/ste-href-ab8505.dtsi
deleted file mode 100644
index 95cf38a008e9..000000000000
--- a/arch/arm/boot/dts/ste-href-ab8505.dtsi
+++ /dev/null
@@ -1,234 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2014 Linaro Ltd.
- */
-
-/ {
-	soc {
-		prcmu@80157000 {
-			ab8505 {
-				ab8505-gpio {
-					/* Hog a few default settings */
-					pinctrl-names = "default";
-					pinctrl-0 = <&gpio2_default_mode>,
-						    <&gpio10_default_mode>,
-						    <&gpio11_default_mode>,
-						    <&gpio13_default_mode>,
-						    <&gpio34_default_mode>,
-						    <&gpio50_default_mode>,
-						    <&pwm_default_mode>,
-						    <&adi2_default_mode>,
-						    <&modsclsda_default_mode>,
-						    <&resethw_default_mode>,
-						    <&service_default_mode>;
-
-					/*
-					 * Pins 2, 10, 11, 13, 34 and 50
-					 * are muxed in as GPIO, and configured as INPUT PULL DOWN
-					 */
-					gpio2 {
-						gpio2_default_mode: gpio2_default {
-							default_mux {
-								function = "gpio";
-								groups = "gpio2_a_1";
-							};
-							default_cfg {
-								pins = "GPIO2_R5";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					gpio10 {
-						gpio10_default_mode: gpio10_default {
-							default_mux {
-								function = "gpio";
-								groups = "gpio10_d_1";
-							};
-							default_cfg {
-								pins = "GPIO10_B16";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					gpio11 {
-						gpio11_default_mode: gpio11_default {
-							default_mux {
-								function = "gpio";
-								groups = "gpio11_d_1";
-							};
-							default_cfg {
-								pins = "GPIO11_B17";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					gpio13 {
-						gpio13_default_mode: gpio13_default {
-							default_mux {
-								function = "gpio";
-								groups = "gpio13_d_1";
-							};
-							default_cfg {
-								pins = "GPIO13_D17";
-								input-enable;
-								bias-disable;
-							};
-						};
-					};
-					gpio34 {
-						gpio34_default_mode: gpio34_default {
-							default_mux {
-								function = "gpio";
-								groups = "gpio34_a_1";
-							};
-							default_cfg {
-								pins = "GPIO34_H14";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					gpio50 {
-						gpio50_default_mode: gpio50_default {
-							default_mux {
-								function = "gpio";
-								groups = "gpio50_d_1";
-							};
-							default_cfg {
-								pins = "GPIO50_L4";
-								input-enable;
-								bias-disable;
-							};
-						};
-					};
-					/* This sets up the PWM pin 14 */
-					pwm {
-						pwm_default_mode: pwm_default {
-							default_mux {
-								function = "pwmout";
-								groups = "pwmout1_d_1";
-							};
-							default_cfg {
-								pins = "GPIO14_C16";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					/* This sets up audio interface 2 */
-					adi2 {
-						adi2_default_mode: adi2_default {
-							default_mux {
-								function = "adi2";
-								groups = "adi2_d_1";
-							};
-							default_cfg {
-								pins = "GPIO17_P2",
-									 "GPIO18_N3",
-									 "GPIO19_T1",
-									 "GPIO20_P3";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					/* Modem I2C setup (SCL and SDA pins) */
-					modsclsda {
-						modsclsda_default_mode: modsclsda_default {
-							default_mux {
-								function = "modsclsda";
-								groups = "modsclsda_d_1";
-							};
-							default_cfg {
-								pins = "GPIO40_J15",
-									"GPIO41_J14";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					resethw {
-						resethw_default_mode: resethw_default {
-							default_mux {
-								function = "resethw";
-								groups = "resethw_d_1";
-							};
-							default_cfg {
-								pins = "GPIO52_D16";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					service {
-						service_default_mode: service_default {
-							default_mux {
-								function = "service";
-								groups = "service_d_1";
-							};
-							default_cfg {
-								pins = "GPIO53_D15";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					/*
-					 * Clock output pins associated with regulators.
-					 */
-					sysclkreq2 {
-						sysclkreq2_default_mode: sysclkreq2_default {
-							default_mux {
-								function = "sysclkreq";
-								groups = "sysclkreq2_d_1";
-							};
-							default_cfg {
-								pins = "GPIO1_N4";
-								input-enable;
-								bias-disable;
-							};
-						};
-						sysclkreq2_sleep_mode: sysclkreq2_sleep {
-							default_mux {
-								function = "gpio";
-								groups = "gpio1_a_1";
-							};
-							default_cfg {
-								pins = "GPIO1_N4";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					sysclkreq4 {
-						sysclkreq4_default_mode: sysclkreq4_default {
-							default_mux {
-								function = "sysclkreq";
-								groups = "sysclkreq4_d_1";
-							};
-							default_cfg {
-								pins = "GPIO3_P5";
-								input-enable;
-								bias-disable;
-							};
-						};
-						sysclkreq4_sleep_mode: sysclkreq4_sleep {
-							default_mux {
-								function = "gpio";
-								groups = "gpio3_a_1";
-							};
-							default_cfg {
-								pins = "GPIO3_P5";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-				};
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi b/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi
index 2c382d274ff6..434fa6baf71f 100644
--- a/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi
+++ b/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi
@@ -3,212 +3,11 @@
  * Copyright 2013 Linaro Ltd.
  */
 
-#include "ste-nomadik-pinctrl.dtsi"
+#include "ste-dbx5x0-pinctrl.dtsi"
 
 / {
 	soc {
 		pinctrl {
-			/* Settings for all UART default and sleep states */
-			uart0 {
-				uart0_default_mode: uart0_default {
-					default_mux {
-						function = "u0";
-						groups = "u0_a_1";
-					};
-					default_cfg1 {
-						pins = "GPIO0_AJ5", "GPIO2_AH4"; /* CTS+RXD */
-						ste,config = <&in_pu>;
-					};
-
-					default_cfg2 {
-						pins = "GPIO1_AJ3", "GPIO3_AH3"; /* RTS+TXD */
-						ste,config = <&out_hi>;
-					};
-				};
-
-				uart0_sleep_mode: uart0_sleep {
-					sleep_cfg1 {
-						pins = "GPIO0_AJ5", "GPIO2_AH4"; /* CTS+RXD */
-						ste,config = <&slpm_in_wkup_pdis>;
-					};
-
-					sleep_cfg2 {
-						pins = "GPIO1_AJ3"; /* RTS */
-						ste,config = <&slpm_out_hi_wkup_pdis>;
-					};
-
-					sleep_cfg3 {
-						pins = "GPIO3_AH3"; /* TXD */
-						ste,config = <&slpm_out_wkup_pdis>;
-					};
-				};
-			};
-
-			uart1 {
-				uart1_default_mode: uart1_default {
-					default_mux {
-						function = "u1";
-						groups = "u1rxtx_a_1";
-					};
-					default_cfg1 {
-						pins = "GPIO4_AH6"; /* RXD */
-						ste,config = <&in_pu>;
-					};
-
-					default_cfg2 {
-						pins = "GPIO5_AG6"; /* TXD */
-						ste,config = <&out_hi>;
-					};
-				};
-
-				uart1_sleep_mode: uart1_sleep {
-					sleep_cfg1 {
-						pins = "GPIO4_AH6"; /* RXD */
-						ste,config = <&slpm_in_wkup_pdis>;
-					};
-
-					sleep_cfg2 {
-						pins = "GPIO5_AG6"; /* TXD */
-						ste,config = <&slpm_out_wkup_pdis>;
-					};
-				};
-			};
-
-			uart2 {
-				uart2_default_mode: uart2_default {
-					default_mux {
-						function = "u2";
-						groups = "u2rxtx_c_1";
-					};
-					default_cfg1 {
-						pins = "GPIO29_W2"; /* RXD */
-						ste,config = <&in_pu>;
-					};
-
-					default_cfg2 {
-						pins = "GPIO30_W3"; /* TXD */
-						ste,config = <&out_hi>;
-					};
-				};
-
-				uart2_sleep_mode: uart2_sleep {
-					sleep_cfg1 {
-						pins = "GPIO29_W2"; /* RXD */
-						ste,config = <&in_wkup_pdis>;
-					};
-
-					sleep_cfg2 {
-						pins = "GPIO30_W3"; /* TXD */
-						ste,config = <&out_wkup_pdis>;
-					};
-				};
-			};
-
-			/* Settings for all I2C default and sleep states */
-			i2c0 {
-				i2c0_default_mode: i2c_default {
-					default_mux {
-						function = "i2c0";
-						groups = "i2c0_a_1";
-					};
-					default_cfg1 {
-						pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */
-						ste,config = <&in_pu>;
-					};
-				};
-
-				i2c0_sleep_mode: i2c_sleep {
-					sleep_cfg1 {
-						pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */
-						ste,config = <&slpm_in_wkup_pdis>;
-					};
-				};
-			};
-
-			i2c1 {
-				i2c1_default_mode: i2c_default {
-					default_mux {
-						function = "i2c1";
-						groups = "i2c1_b_2";
-					};
-					default_cfg1 {
-						pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */
-						ste,config = <&in_pu>;
-					};
-				};
-
-				i2c1_sleep_mode: i2c_sleep {
-					sleep_cfg1 {
-						pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */
-						ste,config = <&slpm_in_wkup_pdis>;
-					};
-				};
-			};
-
-			i2c2 {
-				i2c2_default_mode: i2c_default {
-					default_mux {
-						function = "i2c2";
-						groups = "i2c2_b_2";
-					};
-					default_cfg1 {
-						pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */
-						ste,config = <&in_pu>;
-					};
-				};
-
-				i2c2_sleep_mode: i2c_sleep {
-					sleep_cfg1 {
-						pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */
-						ste,config = <&slpm_in_wkup_pdis>;
-					};
-				};
-			};
-
-			i2c3 {
-				i2c3_default_mode: i2c_default {
-					default_mux {
-						function = "i2c3";
-						groups = "i2c3_c_2";
-					};
-					default_cfg1 {
-						pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */
-						ste,config = <&in_pu>;
-					};
-				};
-
-				i2c3_sleep_mode: i2c_sleep {
-					sleep_cfg1 {
-						pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */
-						ste,config = <&slpm_in_wkup_pdis>;
-					};
-				};
-			};
-
-			/*
-			 * Activating I2C4 will conflict with UART1 about the same pins so do not
-			 * enable I2C4 and UART1 at the same time.
-			 */
-			i2c4 {
-				i2c4_default_mode: i2c_default {
-					default_mux {
-						function = "i2c4";
-						groups = "i2c4_b_1";
-					};
-					default_cfg1 {
-						pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */
-						ste,config = <&in_pu>;
-					};
-				};
-
-				i2c4_sleep_mode: i2c_sleep {
-					sleep_cfg1 {
-						pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */
-						ste,config = <&slpm_in_wkup_pdis>;
-					};
-				};
-			};
-
 			/* Settings for all SPI default and sleep states */
 			spi2 {
 				spi2_default_mode: spi_default {
@@ -270,335 +69,6 @@
 				};
 			};
 
-			/* Settings for all MMC/SD/SDIO default and sleep states */
-			sdi0 {
-				/* This is the external SD card slot, 4 bits wide */
-				sdi0_default_mode: sdi0_default {
-					default_mux {
-						function = "mc0";
-						groups = "mc0_a_1";
-					};
-					default_cfg1 {
-						pins =
-						"GPIO18_AC2", /* CMDDIR */
-						"GPIO19_AC1", /* DAT0DIR */
-						"GPIO20_AB4"; /* DAT2DIR */
-						ste,config = <&out_hi>;
-					};
-					default_cfg2 {
-						pins = "GPIO22_AA3"; /* FBCLK */
-						ste,config = <&in_nopull>;
-					};
-					default_cfg3 {
-						pins = "GPIO23_AA4"; /* CLK */
-						ste,config = <&out_lo>;
-					};
-					default_cfg4 {
-						pins =
-						"GPIO24_AB2", /* CMD */
-						"GPIO25_Y4", /* DAT0 */
-						"GPIO26_Y2", /* DAT1 */
-						"GPIO27_AA2", /* DAT2 */
-						"GPIO28_AA1"; /* DAT3 */
-						ste,config = <&in_pu>;
-					};
-				};
-
-				sdi0_sleep_mode: sdi0_sleep {
-					sleep_cfg1 {
-						pins =
-						"GPIO18_AC2", /* CMDDIR */
-						"GPIO19_AC1", /* DAT0DIR */
-						"GPIO20_AB4"; /* DAT2DIR */
-						ste,config = <&slpm_out_hi_wkup_pdis>;
-					};
-					sleep_cfg2 {
-						pins =
-						"GPIO22_AA3", /* FBCLK */
-						"GPIO24_AB2", /* CMD */
-						"GPIO25_Y4", /* DAT0 */
-						"GPIO26_Y2", /* DAT1 */
-						"GPIO27_AA2", /* DAT2 */
-						"GPIO28_AA1"; /* DAT3 */
-						ste,config = <&slpm_in_wkup_pdis>;
-					};
-					sleep_cfg3 {
-						pins = "GPIO23_AA4"; /* CLK */
-						ste,config = <&slpm_out_lo_wkup_pdis>;
-					};
-				};
-			};
-
-			sdi1 {
-				/* This is the WLAN SDIO 4 bits wide */
-				sdi1_default_mode: sdi1_default {
-					default_mux {
-						function = "mc1";
-						groups = "mc1_a_1";
-					};
-					default_cfg1 {
-						pins = "GPIO208_AH16"; /* CLK */
-						ste,config = <&out_lo>;
-					};
-					default_cfg2 {
-						pins = "GPIO209_AG15"; /* FBCLK */
-						ste,config = <&in_nopull>;
-					};
-					default_cfg3 {
-						pins =
-						"GPIO210_AJ15", /* CMD */
-						"GPIO211_AG14", /* DAT0 */
-						"GPIO212_AF13", /* DAT1 */
-						"GPIO213_AG13", /* DAT2 */
-						"GPIO214_AH15"; /* DAT3 */
-						ste,config = <&in_pu>;
-					};
-				};
-
-				sdi1_sleep_mode: sdi1_sleep {
-					sleep_cfg1 {
-						pins = "GPIO208_AH16"; /* CLK */
-						ste,config = <&slpm_out_lo_wkup_pdis>;
-					};
-					sleep_cfg2 {
-						pins =
-						"GPIO209_AG15", /* FBCLK */
-						"GPIO210_AJ15", /* CMD */
-						"GPIO211_AG14", /* DAT0 */
-						"GPIO212_AF13", /* DAT1 */
-						"GPIO213_AG13", /* DAT2 */
-						"GPIO214_AH15"; /* DAT3 */
-						ste,config = <&slpm_in_wkup_pdis>;
-					};
-				};
-			};
-
-			sdi2 {
-				/* This is the eMMC 8 bits wide, usually PoP eMMC */
-				sdi2_default_mode: sdi2_default {
-					default_mux {
-						function = "mc2";
-						groups = "mc2_a_1";
-					};
-					default_cfg1 {
-						pins = "GPIO128_A5"; /* CLK */
-						ste,config = <&out_lo>;
-					};
-					default_cfg2 {
-						pins = "GPIO130_C8"; /* FBCLK */
-						ste,config = <&in_nopull>;
-					};
-					default_cfg3 {
-						pins =
-						"GPIO129_B4", /* CMD */
-						"GPIO131_A12", /* DAT0 */
-						"GPIO132_C10", /* DAT1 */
-						"GPIO133_B10", /* DAT2 */
-						"GPIO134_B9", /* DAT3 */
-						"GPIO135_A9", /* DAT4 */
-						"GPIO136_C7", /* DAT5 */
-						"GPIO137_A7", /* DAT6 */
-						"GPIO138_C5"; /* DAT7 */
-						ste,config = <&in_pu>;
-					};
-				};
-
-				sdi2_sleep_mode: sdi2_sleep {
-					sleep_cfg1 {
-						pins = "GPIO128_A5"; /* CLK */
-						ste,config = <&out_lo_wkup_pdis>;
-					};
-					sleep_cfg2 {
-						pins =
-						"GPIO130_C8", /* FBCLK */
-						"GPIO129_B4"; /* CMD */
-						ste,config = <&in_wkup_pdis_en>;
-					};
-					sleep_cfg3 {
-						pins =
-						"GPIO131_A12", /* DAT0 */
-						"GPIO132_C10", /* DAT1 */
-						"GPIO133_B10", /* DAT2 */
-						"GPIO134_B9", /* DAT3 */
-						"GPIO135_A9", /* DAT4 */
-						"GPIO136_C7", /* DAT5 */
-						"GPIO137_A7", /* DAT6 */
-						"GPIO138_C5"; /* DAT7 */
-						ste,config = <&in_wkup_pdis>;
-					};
-				};
-			};
-
-			sdi4 {
-				/* This is the eMMC 8 bits wide, usually PCB-mounted eMMC */
-				sdi4_default_mode: sdi4_default {
-					default_mux {
-						function = "mc4";
-						groups = "mc4_a_1";
-					};
-					default_cfg1 {
-						pins = "GPIO203_AE23"; /* CLK */
-						ste,config = <&out_lo>;
-					};
-					default_cfg2 {
-						pins = "GPIO202_AF25"; /* FBCLK */
-						ste,config = <&in_nopull>;
-					};
-					default_cfg3 {
-						pins =
-						"GPIO201_AF24", /* CMD */
-						"GPIO200_AH26", /* DAT0 */
-						"GPIO199_AH23", /* DAT1 */
-						"GPIO198_AG25", /* DAT2 */
-						"GPIO197_AH24", /* DAT3 */
-						"GPIO207_AJ23", /* DAT4 */
-						"GPIO206_AG24", /* DAT5 */
-						"GPIO205_AG23", /* DAT6 */
-						"GPIO204_AF23"; /* DAT7 */
-						ste,config = <&in_pu>;
-					};
-				};
-
-				sdi4_sleep_mode: sdi4_sleep {
-					sleep_cfg1 {
-						pins = "GPIO203_AE23"; /* CLK */
-						ste,config = <&out_lo_wkup_pdis>;
-					};
-					sleep_cfg2 {
-						pins =
-						"GPIO202_AF25", /* FBCLK */
-						"GPIO201_AF24", /* CMD */
-						"GPIO200_AH26", /* DAT0 */
-						"GPIO199_AH23", /* DAT1 */
-						"GPIO198_AG25", /* DAT2 */
-						"GPIO197_AH24", /* DAT3 */
-						"GPIO207_AJ23", /* DAT4 */
-						"GPIO206_AG24", /* DAT5 */
-						"GPIO205_AG23", /* DAT6 */
-						"GPIO204_AF23"; /* DAT7 */
-						ste,config = <&slpm_in_wkup_pdis>;
-					};
-				};
-			};
-
-			/*
-			 * Multi-rate serial ports (MSPs) - MSP3 output is internal and
-			 * cannot be muxed onto any pins.
-			 */
-			msp0 {
-				msp0_default_mode: msp0_default {
-					default_msp0_mux {
-						function = "msp0";
-						groups = "msp0txrx_a_1", "msp0tfstck_a_1";
-					};
-					default_msp0_cfg {
-						pins =
-						"GPIO12_AC4", /* TXD */
-						"GPIO15_AC3", /* RXD */
-						"GPIO13_AF3", /* TFS */
-						"GPIO14_AE3"; /* TCK */
-						ste,config = <&in_nopull>;
-					};
-				};
-			};
-
-			msp1 {
-				msp1_default_mode: msp1_default {
-					default_mux {
-						function = "msp1";
-						groups = "msp1txrx_a_1", "msp1_a_1";
-					};
-					default_cfg1 {
-						pins = "GPIO33_AF2";
-						ste,config = <&out_lo>;
-					};
-					default_cfg2 {
-						pins =
-						"GPIO34_AE1",
-						"GPIO35_AE2",
-						"GPIO36_AG2";
-						ste,config = <&in_nopull>;
-					};
-
-				};
-			};
-
-			msp2 {
-				msp2_default_mode: msp2_default {
-					/* MSP2 usually used for HDMI audio */
-					default_mux {
-						function = "msp2";
-						groups = "msp2_a_1";
-					};
-					default_cfg1 {
-						pins =
-						"GPIO193_AH27", /* TXD */
-						"GPIO194_AF27", /* TCK */
-						"GPIO195_AG28"; /* TFS */
-						ste,config = <&in_pd>;
-					};
-					default_cfg2 {
-						pins = "GPIO196_AG26"; /* RXD */
-						ste,config = <&out_lo>;
-					};
-				};
-			};
-
-
-			musb {
-				musb_default_mode: musb_default {
-					default_mux {
-						function = "usb";
-						groups = "usb_a_1";
-					};
-					default_cfg1 {
-						pins =
-						"GPIO256_AF28", /* NXT */
-						"GPIO258_AD29", /* XCLK */
-						"GPIO259_AC29", /* DIR */
-						"GPIO260_AD28", /* DAT7 */
-						"GPIO261_AD26", /* DAT6 */
-						"GPIO262_AE26", /* DAT5 */
-						"GPIO263_AG29", /* DAT4 */
-						"GPIO264_AE27", /* DAT3 */
-						"GPIO265_AD27", /* DAT2 */
-						"GPIO266_AC28", /* DAT1 */
-						"GPIO267_AC27"; /* DAT0 */
-						ste,config = <&in_nopull>;
-					};
-					default_cfg2 {
-						pins = "GPIO257_AE29"; /* STP */
-						ste,config = <&out_hi>;
-					};
-				};
-
-				musb_sleep_mode: musb_sleep {
-					sleep_cfg1 {
-						pins =
-						"GPIO256_AF28", /* NXT */
-						"GPIO258_AD29", /* XCLK */
-						"GPIO259_AC29"; /* DIR */
-						ste,config = <&slpm_wkup_pdis_en>;
-					};
-					sleep_cfg2 {
-						pins = "GPIO257_AE29"; /* STP */
-						ste,config = <&slpm_out_hi_wkup_pdis>;
-					};
-					sleep_cfg3 {
-						pins =
-						"GPIO260_AD28", /* DAT7 */
-						"GPIO261_AD26", /* DAT6 */
-						"GPIO262_AE26", /* DAT5 */
-						"GPIO263_AG29", /* DAT4 */
-						"GPIO264_AE27", /* DAT3 */
-						"GPIO265_AD27", /* DAT2 */
-						"GPIO266_AC28", /* DAT1 */
-						"GPIO267_AC27"; /* DAT0 */
-						ste,config = <&slpm_in_wkup_pdis_en>;
-					};
-				};
-			};
-
 			mcde {
 				lcd_default_mode: lcd_default {
 					default_mux1 {
diff --git a/arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi
new file mode 100644
index 000000000000..e024520f4d47
--- /dev/null
+++ b/arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Device Tree for the TVK1281618 R2 UIB
+ */
+
+#include "ste-href-tvk1281618.dtsi"
+
+/ {
+	soc {
+		i2c@80128000 {
+			lsm303dlh@18 {
+				/* Accelerometer */
+				compatible = "st,lsm303dlh-accel";
+				st,drdy-int-pin = <1>;
+				drive-open-drain;
+				reg = <0x18>;
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vddio-supply = <&db8500_vsmps2_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&accel_tvk_mode>;
+				/*
+				 * These interrupts cannot be used: the other component
+				 * ST-Micro L3D4200D gyro that is connected to the same lines
+				 * cannot set its DRDY line to open drain, so it cannot be
+				 * shared with other peripherals. The should be defined for
+				 * the falling edge if they could be wired together.
+				 *
+				 * interrupts-extended =
+				 * <&gpio1 0 IRQ_TYPE_EDGE_FALLING>,
+				 * <&gpio2 19 IRQ_TYPE_EDGE_FALLING>;
+				 */
+			};
+			lsm303dlh@1e {
+				/* Magnetometer */
+				compatible = "st,lsm303dlh-magn";
+				reg = <0x1e>;
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vddio-supply = <&db8500_vsmps2_reg>;
+				/*
+				 * These interrupts cannot be used: the other component
+				 * ST-Micro L3D4200D gyro that is connected to the same lines
+				 * cannot set its DRDY line to open drain, so it cannot be
+				 * shared with other peripherals. The should be defined for
+				 * the falling edge if they could be wired together.
+				 *
+				 * interrupts-extended =
+				 * <&gpio1 0 IRQ_TYPE_EDGE_FALLING>,
+				 * <&gpio2 19 IRQ_TYPE_EDGE_FALLING>;
+				 */
+			};
+			lis331dl@1c {
+				/* Accelerometer */
+				compatible = "st,lis331dl-accel";
+				st,drdy-int-pin = <1>;
+				reg = <0x1c>;
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vddio-supply = <&db8500_vsmps2_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&accel_tvk_mode>;
+				interrupt-parent = <&gpio2>;
+				/* INT2 would need to be open drain */
+				interrupts = <18 IRQ_TYPE_EDGE_RISING>,
+					     <19 IRQ_TYPE_EDGE_RISING>;
+			};
+		};
+		mcde@a0350000 {
+			status = "okay";
+
+			dsi@a0351000 {
+				panel {
+					compatible = "samsung,s6d16d0";
+					reg = <0>;
+					vdd1-supply = <&ab8500_ldo_aux1_reg>;
+					reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi
new file mode 100644
index 000000000000..cb3677f0a1cb
--- /dev/null
+++ b/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Device Tree for the TVK1281618 R2 UIB
+ */
+
+#include "ste-href-tvk1281618.dtsi"
+
+/ {
+	soc {
+		i2c@80128000 {
+			/* Marked:
+			 * 129
+			 * M35
+			 * L3GD20
+			 */
+			l3gd20@6a {
+				/* Gyroscope */
+				compatible = "st,l3gd20";
+				status = "disabled";
+				st,drdy-int-pin = <1>;
+				drive-open-drain;
+				reg = <0x6a>; // 0x6a or 0x6b
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vddio-supply = <&db8500_vsmps2_reg>;
+			};
+			/*
+			 * Marked:
+			 * 2122
+			 * C3H
+			 * DQEEE
+			 * LIS3DH?
+			 */
+			lis3dh@18 {
+				/* Accelerometer */
+				compatible = "st,lis3dh-accel";
+				st,drdy-int-pin = <1>;
+				reg = <0x18>;
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vddio-supply = <&db8500_vsmps2_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&accel_tvk_mode>;
+			};
+		};
+
+		mcde@a0350000 {
+			status = "okay";
+
+			dsi@a0351000 {
+				panel {
+					compatible = "sony,acx424akp";
+					reg = <0>;
+					vddi-supply = <&ab8500_ldo_aux1_reg>;
+					reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
index 3bafd26b4824..e1dbfae22595 100644
--- a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
+++ b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
@@ -2,7 +2,7 @@
 /*
  * Copyright 2012 ST-Ericsson AB
  *
- * Device Tree for the TVK1281618 UIB
+ * Device Tree for the TVK1281618 family of UIBs
  */
 
 #include <dt-bindings/interrupt-controller/irq.h>
@@ -81,62 +81,8 @@
 				};
 			};
 		};
-		/* Sensors mounted on this board variant */
+		/* Sensors mounted on all board variants */
 		i2c@80128000 {
-			lsm303dlh@18 {
-				/* Accelerometer */
-				compatible = "st,lsm303dlh-accel";
-				st,drdy-int-pin = <1>;
-				drive-open-drain;
-				reg = <0x18>;
-				vdd-supply = <&ab8500_ldo_aux1_reg>;
-				vddio-supply = <&db8500_vsmps2_reg>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&accel_tvk_mode>;
-				/*
-				 * These interrupts cannot be used: the other component
-				 * ST-Micro L3D4200D gyro that is connected to the same lines
-				 * cannot set its DRDY line to open drain, so it cannot be
-				 * shared with other peripherals. The should be defined for
-				 * the falling edge if they could be wired together.
-				 *
-				 * interrupts-extended =
-				 * <&gpio1 0 IRQ_TYPE_EDGE_FALLING>,
-				 * <&gpio2 19 IRQ_TYPE_EDGE_FALLING>;
-				 */
-			};
-			lsm303dlh@1e {
-				/* Magnetometer */
-				compatible = "st,lsm303dlh-magn";
-				reg = <0x1e>;
-				vdd-supply = <&ab8500_ldo_aux1_reg>;
-				vddio-supply = <&db8500_vsmps2_reg>;
-				/*
-				 * These interrupts cannot be used: the other component
-				 * ST-Micro L3D4200D gyro that is connected to the same lines
-				 * cannot set its DRDY line to open drain, so it cannot be
-				 * shared with other peripherals. The should be defined for
-				 * the falling edge if they could be wired together.
-				 *
-				 * interrupts-extended =
-				 * <&gpio1 0 IRQ_TYPE_EDGE_FALLING>,
-				 * <&gpio2 19 IRQ_TYPE_EDGE_FALLING>;
-				 */
-			};
-			lis331dl@1c {
-				/* Accelerometer */
-				compatible = "st,lis331dl-accel";
-				st,drdy-int-pin = <1>;
-				reg = <0x1c>;
-				vdd-supply = <&ab8500_ldo_aux1_reg>;
-				vddio-supply = <&db8500_vsmps2_reg>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&accel_tvk_mode>;
-				interrupt-parent = <&gpio2>;
-				/* INT2 would need to be open drain */
-				interrupts = <18 IRQ_TYPE_EDGE_RISING>,
-					     <19 IRQ_TYPE_EDGE_RISING>;
-			};
 			ak8974@f {
 				/* Magnetometer */
 				compatible = "asahi-kasei,ak8974";
@@ -268,18 +214,5 @@
 				};
 			};
 		};
-
-		mcde@a0350000 {
-			status = "okay";
-
-			dsi@a0351000 {
-				panel {
-					compatible = "samsung,s6d16d0";
-					reg = <0>;
-					vdd1-supply = <&ab8500_ldo_aux1_reg>;
-					reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
-				};
-			};
-		};
 	};
 };
diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi
index 4f6acbd8c040..33e3b0b3c53d 100644
--- a/arch/arm/boot/dts/ste-href.dtsi
+++ b/arch/arm/boot/dts/ste-href.dtsi
@@ -4,7 +4,6 @@
  */
 
 #include <dt-bindings/interrupt-controller/irq.h>
-#include "ste-dbx5x0.dtsi"
 #include "ste-href-family-pinctrl.dtsi"
 
 / {
@@ -16,41 +15,44 @@
 	soc {
 		uart@80120000 {
 			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&uart0_default_mode>;
-			pinctrl-1 = <&uart0_sleep_mode>;
+			pinctrl-0 = <&u0_a_1_default>;
+			pinctrl-1 = <&u0_a_1_sleep>;
 			status = "okay";
 		};
 
 		/* This UART is unused and thus left disabled */
 		uart@80121000 {
 			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&uart1_default_mode>;
-			pinctrl-1 = <&uart1_sleep_mode>;
+			pinctrl-0 = <&u1rxtx_a_1_default>;
+			pinctrl-1 = <&u1rxtx_a_1_sleep>;
 		};
 
 		uart@80007000 {
 			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&uart2_default_mode>;
-			pinctrl-1 = <&uart2_sleep_mode>;
+			pinctrl-0 = <&u2rxtx_c_1_default>;
+			pinctrl-1 = <&u2rxtx_c_1_sleep>;
 			status = "okay";
 		};
 
 		i2c@80004000 {
 			pinctrl-names = "default","sleep";
-			pinctrl-0 = <&i2c0_default_mode>;
-			pinctrl-1 = <&i2c0_sleep_mode>;
+			pinctrl-0 = <&i2c0_a_1_default>;
+			pinctrl-1 = <&i2c0_a_1_sleep>;
+			status = "okay";
 		};
 
 		i2c@80122000 {
 			pinctrl-names = "default","sleep";
-			pinctrl-0 = <&i2c1_default_mode>;
-			pinctrl-1 = <&i2c1_sleep_mode>;
+			pinctrl-0 = <&i2c1_b_2_default>;
+			pinctrl-1 = <&i2c1_b_2_sleep>;
+			status = "okay";
 		};
 
 		i2c@80128000 {
 			pinctrl-names = "default","sleep";
-			pinctrl-0 = <&i2c2_default_mode>;
-			pinctrl-1 = <&i2c2_sleep_mode>;
+			pinctrl-0 = <&i2c2_b_2_default>;
+			pinctrl-1 = <&i2c2_b_2_sleep>;
+			status = "okay";
 			lp5521@33 {
 				compatible = "national,lp5521";
 				reg = <0x33>;
@@ -96,8 +98,9 @@
 
 		i2c@80110000 {
 			pinctrl-names = "default","sleep";
-			pinctrl-0 = <&i2c3_default_mode>;
-			pinctrl-1 = <&i2c3_sleep_mode>;
+			pinctrl-0 = <&i2c3_c_2_default>;
+			pinctrl-1 = <&i2c3_c_2_sleep>;
+			status = "okay";
 		};
 
 		/* ST6G3244ME level translator for 1.8/2.9 V */
@@ -132,8 +135,8 @@
 			vmmc-supply = <&ab8500_ldo_aux3_reg>;
 			vqmmc-supply = <&vmmci>;
 			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&sdi0_default_mode>;
-			pinctrl-1 = <&sdi0_sleep_mode>;
+			pinctrl-0 = <&mc0_a_1_default &sdi0_default_mode>;
+			pinctrl-1 = <&mc0_a_1_sleep>;
 
 			status = "okay";
 		};
@@ -145,8 +148,8 @@
 			bus-width = <4>;
 			non-removable;
 			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&sdi1_default_mode>;
-			pinctrl-1 = <&sdi1_sleep_mode>;
+			pinctrl-0 = <&mc1_a_1_default>;
+			pinctrl-1 = <&mc1_a_1_sleep>;
 
 			status = "okay";
 		};
@@ -160,8 +163,8 @@
 			non-removable;
 			vmmc-supply = <&db8500_vsmps2_reg>;
 			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&sdi2_default_mode>;
-			pinctrl-1 = <&sdi2_sleep_mode>;
+			pinctrl-0 = <&mc2_a_1_default>;
+			pinctrl-1 = <&mc2_a_1_sleep>;
 
 			status = "okay";
 		};
@@ -175,27 +178,27 @@
 			non-removable;
 			vmmc-supply = <&ab8500_ldo_aux2_reg>;
 			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&sdi4_default_mode>;
-			pinctrl-1 = <&sdi4_sleep_mode>;
+			pinctrl-0 = <&mc4_a_1_default>;
+			pinctrl-1 = <&mc4_a_1_sleep>;
 
 			status = "okay";
 		};
 
 		msp0: msp@80123000 {
 			pinctrl-names = "default";
-			pinctrl-0 = <&msp0_default_mode>;
+			pinctrl-0 = <&msp0txrxtfstck_a_1_default>;
 			status = "okay";
 		};
 
 		msp1: msp@80124000 {
 			pinctrl-names = "default";
-			pinctrl-0 = <&msp1_default_mode>;
+			pinctrl-0 = <&msp1txrx_a_1_default>;
 			status = "okay";
 		};
 
 		msp2: msp@80117000 {
 			pinctrl-names = "default";
-			pinctrl-0 = <&msp2_default_mode>;
+			pinctrl-0 = <&msp2_a_1_default>;
 		};
 
 		msp3: msp@80125000 {
@@ -209,8 +212,8 @@
 
 				ab8500_usb {
 					pinctrl-names = "default", "sleep";
-					pinctrl-0 = <&musb_default_mode>;
-					pinctrl-1 = <&musb_sleep_mode>;
+					pinctrl-0 = <&usb_a_1_default>;
+					pinctrl-1 = <&usb_a_1_sleep>;
 				};
 
 				ab8500-regulators {
@@ -257,6 +260,14 @@
 			};
 		};
 
+		pinctrl {
+			sdi0 {
+				sdi0_default_mode: sdi0_default {
+					/* Some boards set additional settings here */
+				};
+			};
+		};
+
 		mcde@a0350000 {
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&lcd_default_mode>;
diff --git a/arch/arm/boot/dts/ste-href520-tvk.dts b/arch/arm/boot/dts/ste-href520-tvk.dts
new file mode 100644
index 000000000000..f8c0c1e6aa04
--- /dev/null
+++ b/arch/arm/boot/dts/ste-href520-tvk.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Device Tree for the HREF520 version with the TVK1281618 UIB
+ */
+
+/dts-v1/;
+#include "ste-db8520.dtsi"
+#include "ste-hrefv60plus.dtsi"
+#include "ste-href-tvk1281618-r3.dtsi"
+
+/ {
+	model = "ST-Ericsson HREF520 and TVK1281618 UIB";
+	compatible = "st-ericsson,href520", "st-ericsson,u8500";
+
+	soc {
+		vmmci: regulator-gpio {
+			gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+			enable-gpio = <&gpio2 14 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ste-hrefprev60-stuib.dts b/arch/arm/boot/dts/ste-hrefprev60-stuib.dts
index b78be5f4c212..8ce6b723abf2 100644
--- a/arch/arm/boot/dts/ste-hrefprev60-stuib.dts
+++ b/arch/arm/boot/dts/ste-hrefprev60-stuib.dts
@@ -4,8 +4,7 @@
  */
 
 /dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
+#include "ste-db8500.dtsi"
 #include "ste-hrefprev60.dtsi"
 #include "ste-href-stuib.dtsi"
 
@@ -13,13 +12,6 @@
 	model = "ST-Ericsson HREF (pre-v60) and ST UIB";
 	compatible = "st-ericsson,mop500", "st-ericsson,u8500";
 
-	/* This stablilizes the serial port enumeration */
-	aliases {
-		serial0 = &ux500_serial0;
-		serial1 = &ux500_serial1;
-		serial2 = &ux500_serial2;
-	};
-
 	soc {
 		/* Reset line for the BU21013 touchscreen */
 		i2c@80110000 {
diff --git a/arch/arm/boot/dts/ste-hrefprev60-tvk.dts b/arch/arm/boot/dts/ste-hrefprev60-tvk.dts
index 60eed262d920..142f5475521f 100644
--- a/arch/arm/boot/dts/ste-hrefprev60-tvk.dts
+++ b/arch/arm/boot/dts/ste-hrefprev60-tvk.dts
@@ -4,17 +4,11 @@
  */
 
 /dts-v1/;
+#include "ste-db8500.dtsi"
 #include "ste-hrefprev60.dtsi"
-#include "ste-href-tvk1281618.dtsi"
+#include "ste-href-tvk1281618-r2.dtsi"
 
 / {
 	model = "ST-Ericsson HREF (pre-v60) and TVK1281618 UIB";
 	compatible = "st-ericsson,mop500", "st-ericsson,u8500";
-
-	/* This stablilizes the serial port enumeration */
-	aliases {
-		serial0 = &ux500_serial0;
-		serial1 = &ux500_serial1;
-		serial2 = &ux500_serial2;
-	};
 };
diff --git a/arch/arm/boot/dts/ste-hrefprev60.dtsi b/arch/arm/boot/dts/ste-hrefprev60.dtsi
index a036defdf164..115495de8612 100644
--- a/arch/arm/boot/dts/ste-hrefprev60.dtsi
+++ b/arch/arm/boot/dts/ste-hrefprev60.dtsi
@@ -5,7 +5,6 @@
  * Device Tree for the HREF+ prior to the v60 variant.
  */
 
-#include "ste-dbx5x0.dtsi"
 #include "ste-href-ab8500.dtsi"
 #include "ste-href.dtsi"
 
@@ -58,6 +57,7 @@
 			 */
 			pinctrl-names = "default";
 			pinctrl-0 = <&ssp0_hrefprev60_mode>;
+			status = "okay";
 		};
 
 		// External Micro SD slot
diff --git a/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts b/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts
index 9be513aad549..1316886e6bcb 100644
--- a/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts
+++ b/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts
@@ -6,8 +6,7 @@
  */
 
 /dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
+#include "ste-db8500.dtsi"
 #include "ste-hrefv60plus.dtsi"
 #include "ste-href-stuib.dtsi"
 
@@ -15,13 +14,6 @@
 	model = "ST-Ericsson HREF (v60+) and ST UIB";
 	compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500";
 
-	/* This stablilizes the serial port enumeration */
-	aliases {
-		serial0 = &ux500_serial0;
-		serial1 = &ux500_serial1;
-		serial2 = &ux500_serial2;
-	};
-
 	soc {
 		/* Reset line for the BU21013 touchscreen */
 		i2c@80110000 {
diff --git a/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts b/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts
index 73ea3100f186..5d4b8245f02c 100644
--- a/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts
+++ b/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts
@@ -6,17 +6,11 @@
  */
 
 /dts-v1/;
+#include "ste-db8500.dtsi"
 #include "ste-hrefv60plus.dtsi"
-#include "ste-href-tvk1281618.dtsi"
+#include "ste-href-tvk1281618-r2.dtsi"
 
 / {
 	model = "ST-Ericsson HREF (v60+) and TVK1281618 UIB";
 	compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500";
-
-	/* This stablilizes the serial port enumeration */
-	aliases {
-		serial0 = &ux500_serial0;
-		serial1 = &ux500_serial1;
-		serial2 = &ux500_serial2;
-	};
 };
diff --git a/arch/arm/boot/dts/ste-hrefv60plus.dtsi b/arch/arm/boot/dts/ste-hrefv60plus.dtsi
index aece8eb2924f..05b4fbbba57f 100644
--- a/arch/arm/boot/dts/ste-hrefv60plus.dtsi
+++ b/arch/arm/boot/dts/ste-hrefv60plus.dtsi
@@ -3,7 +3,6 @@
  * Copyright 2012 ST-Ericsson AB
  */
 
-#include "ste-dbx5x0.dtsi"
 #include "ste-href-ab8500.dtsi"
 #include "ste-href.dtsi"
 
diff --git a/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi b/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi
index 5673a1113aef..bfdb5d9a014f 100644
--- a/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi
+++ b/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi
@@ -25,6 +25,11 @@
 		ste,output = <OUTPUT_LOW>;
 	};
 
+	gpio_in_nopull: gpio_input_nopull {
+		ste,gpio = <GPIOMODE_ENABLED>;
+		ste,input = <INPUT_NOPULL>;
+	};
+
 	gpio_in_pu: gpio_input_pull_up {
 		ste,gpio = <GPIOMODE_ENABLED>;
 		ste,input = <INPUT_PULLUP>;
diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index efbc4467b8b7..be90e73c923e 100644
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -4,7 +4,7 @@
  */
 
 /dts-v1/;
-#include "ste-dbx5x0.dtsi"
+#include "ste-db8500.dtsi"
 #include "ste-href-ab8500.dtsi"
 #include "ste-href-family-pinctrl.dtsi"
 
@@ -12,13 +12,6 @@
 	model = "Calao Systems Snowball platform with device tree";
 	compatible = "calaosystems,snowball-a9500", "st-ericsson,u9500";
 
-	/* This stablilizes the serial port enumeration */
-	aliases {
-		serial0 = &ux500_serial0;
-		serial1 = &ux500_serial1;
-		serial2 = &ux500_serial2;
-	};
-
 	memory {
 		device_type = "memory";
 		reg = <0x00000000 0x20000000>;
@@ -156,19 +149,19 @@
 
 		msp0: msp@80123000 {
 			pinctrl-names = "default";
-			pinctrl-0 = <&msp0_default_mode>;
+			pinctrl-0 = <&msp0txrxtfstck_a_1_default>;
 			status = "okay";
 		};
 
 		msp1: msp@80124000 {
 			pinctrl-names = "default";
-			pinctrl-0 = <&msp1_default_mode>;
+			pinctrl-0 = <&msp1txrx_a_1_default>;
 			status = "okay";
 		};
 
 		msp2: msp@80117000 {
 			pinctrl-names = "default";
-			pinctrl-0 = <&msp2_default_mode>;
+			pinctrl-0 = <&msp2_a_1_default>;
 		};
 
 		msp3: msp@80125000 {
@@ -238,8 +231,8 @@
 			vmmc-supply = <&ab8500_ldo_aux3_reg>;
 			vqmmc-supply = <&vmmci>;
 			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&sdi0_default_mode>;
-			pinctrl-1 = <&sdi0_sleep_mode>;
+			pinctrl-0 = <&mc0_a_1_default &sdi0_default_mode>;
+			pinctrl-1 = <&mc0_a_1_sleep>;
 
 			/* GPIO218 MMC_CD */
 			cd-gpios  = <&gpio6 26 GPIO_ACTIVE_LOW>;
@@ -253,8 +246,8 @@
 			max-frequency = <100000000>;
 			bus-width = <4>;
 			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&sdi1_default_mode>;
-			pinctrl-1 = <&sdi1_sleep_mode>;
+			pinctrl-0 = <&mc1_a_1_default>;
+			pinctrl-1 = <&mc1_a_1_sleep>;
 
 			status = "okay";
 		};
@@ -263,7 +256,7 @@
 		sdi2_per3@80005000 {
 			arm,primecell-periphid = <0x10480180>;
 			pinctrl-names = "default";
-			pinctrl-0 = <&sdi2_sleep_mode>;
+			pinctrl-0 = <&mc2_a_1_sleep>;
 
 			status = "okay";
 		};
@@ -276,49 +269,52 @@
 			cap-mmc-highspeed;
 			vmmc-supply = <&ab8500_ldo_aux2_reg>;
 			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&sdi4_default_mode>;
-			pinctrl-1 = <&sdi4_sleep_mode>;
+			pinctrl-0 = <&mc4_a_1_default>;
+			pinctrl-1 = <&mc4_a_1_sleep>;
 
 			status = "okay";
 		};
 
 		uart@80120000 {
 			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&uart0_default_mode>;
-			pinctrl-1 = <&uart0_sleep_mode>;
+			pinctrl-0 = <&u0_a_1_default>;
+			pinctrl-1 = <&u0_a_1_sleep>;
 			status = "okay";
 		};
 
 		/* This UART is unused and thus left disabled */
 		uart@80121000 {
 			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&uart1_default_mode>;
-			pinctrl-1 = <&uart1_sleep_mode>;
+			pinctrl-0 = <&u1rxtx_a_1_default>;
+			pinctrl-1 = <&u1rxtx_a_1_sleep>;
 		};
 
 		uart@80007000 {
 			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&uart2_default_mode>;
-			pinctrl-1 = <&uart2_sleep_mode>;
+			pinctrl-0 = <&u2rxtx_c_1_default>;
+			pinctrl-1 = <&u2rxtx_c_1_sleep>;
 			status = "okay";
 		};
 
 		i2c@80004000 {
 			pinctrl-names = "default","sleep";
-			pinctrl-0 = <&i2c0_default_mode>;
-			pinctrl-1 = <&i2c0_sleep_mode>;
+			pinctrl-0 = <&i2c0_a_1_default>;
+			pinctrl-1 = <&i2c0_a_1_sleep>;
+			status = "okay";
 		};
 
 		i2c@80122000 {
 			pinctrl-names = "default","sleep";
-			pinctrl-0 = <&i2c1_default_mode>;
-			pinctrl-1 = <&i2c1_sleep_mode>;
+			pinctrl-0 = <&i2c1_b_2_default>;
+			pinctrl-1 = <&i2c1_b_2_sleep>;
+			status = "okay";
 		};
 
 		i2c@80128000 {
 			pinctrl-names = "default","sleep";
-			pinctrl-0 = <&i2c2_default_mode>;
-			pinctrl-1 = <&i2c2_sleep_mode>;
+			pinctrl-0 = <&i2c2_b_2_default>;
+			pinctrl-1 = <&i2c2_b_2_sleep>;
+			status = "okay";
 			lsm303dlh@18 {
 				/* Accelerometer */
 				compatible = "st,lsm303dlh-accel";
@@ -367,20 +363,18 @@
 
 		i2c@80110000 {
 			pinctrl-names = "default","sleep";
-			pinctrl-0 = <&i2c3_default_mode>;
-			pinctrl-1 = <&i2c3_sleep_mode>;
+			pinctrl-0 = <&i2c3_c_2_default>;
+			pinctrl-1 = <&i2c3_c_2_sleep>;
+			status = "okay";
 		};
 
 		spi@80002000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&ssp0_snowball_mode>;
+			status = "okay";
 		};
 
 		prcmu@80157000 {
-			cpufreq {
-				status = "okay";
-			};
-
 			ab8500 {
 				ab8500-gpio {
 					/*
@@ -406,8 +400,8 @@
 
 				ab8500_usb {
 					pinctrl-names = "default", "sleep";
-					pinctrl-0 = <&musb_default_mode>;
-					pinctrl-1 = <&musb_sleep_mode>;
+					pinctrl-0 = <&usb_a_1_default>;
+					pinctrl-1 = <&usb_a_1_sleep>;
 				};
 
 				ext_regulators: ab8500-ext-regulators {
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts
new file mode 100644
index 000000000000..313f0ab16866
--- /dev/null
+++ b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts
@@ -0,0 +1,455 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "ste-db8500.dtsi"
+#include "ste-ab8505.dtsi"
+#include "ste-dbx5x0-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/*
+ * Note: This device tree cannot be booted directly with the Samsung bootloader.
+ * You need an intermediate, device-tree compatible bootloader
+ * that locks the L2 cache. Otherwise the kernel will crash after decompression.
+ *
+ * There is a port of (mainline) U-Boot, see
+ * https://wiki.postmarketos.org/wiki/ST-Ericsson_NovaThor_U8500#U-Boot
+ */
+/ {
+	model = "Samsung Galaxy S III mini (GT-I8190)";
+	compatible = "samsung,golden", "st-ericsson,u8500";
+
+	chosen {
+		stdout-path = &serial2;
+	};
+
+	soc {
+		/* External Micro SD card slot */
+		sdi0_per1@80126000 {
+			status = "okay";
+
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <100000000>;
+			bus-width = <4>;
+
+			non-removable;
+			/*
+			 * Unfortunately, there is no way to enable the UHS
+			 * modes due to a limitation of the SD level translator:
+			 * It will either translate to 2.9V or disconnect the
+			 * DATA lines, so switching to 1.8V signal voltage fails.
+			 */
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			st,sig-pin-fbclk;
+			full-pwr-cycle;
+
+			vmmc-supply = <&ab8500_ldo_aux3_reg>;
+			vqmmc-supply = <&sd_level_translator>;
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&mc0_a_2_default>;
+			pinctrl-1 = <&mc0_a_2_sleep>;
+		};
+
+		/* WLAN SDIO */
+		sdi1_per2@80118000 {
+			status = "okay";
+
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <50000000>;
+			bus-width = <4>;
+
+			non-removable;
+			cap-sd-highspeed;
+
+			vmmc-supply = <&wl_reg_on>;
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&mc1_a_2_default>;
+			pinctrl-1 = <&mc1_a_2_sleep>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			wifi@1 {
+				compatible = "brcm,bcm4329-fmac";
+				reg = <1>;
+
+				/* GPIO216 (WLAN_HOST_WAKE) */
+				interrupt-parent = <&gpio6>;
+				interrupts = <24 IRQ_TYPE_EDGE_FALLING>;
+				interrupt-names = "host-wake";
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&wlan_default>;
+			};
+		};
+
+		/* eMMC */
+		sdi2_per3@80005000 {
+			status = "okay";
+
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <100000000>;
+			bus-width = <8>;
+
+			non-removable;
+			cap-mmc-highspeed;
+			mmc-ddr-1_8v;
+
+			vmmc-supply = <&vmem_3v3>;
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&mc2_a_1_default>;
+			pinctrl-1 = <&mc2_a_1_sleep>;
+		};
+
+		/* BT UART */
+		uart@80120000 {
+			status = "okay";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&u0_a_1_default>;
+			pinctrl-1 = <&u0_a_1_sleep>;
+
+			bluetooth {
+				compatible = "brcm,bcm4330-bt";
+				/* GPIO222 (BT_VREG_ON) */
+				shutdown-gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>;
+				/* GPIO199 (BT_WAKE) */
+				device-wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+				/* GPIO97 (BT_HOST_WAKE) */
+				host-wakeup-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&bluetooth_default>;
+			};
+		};
+
+		/* GPF UART */
+		uart@80121000 {
+			status = "okay";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&u1rxtx_a_1_default &u1ctsrts_a_1_default>;
+			pinctrl-1 = <&u1rxtx_a_1_sleep &u1ctsrts_a_1_sleep>;
+		};
+
+		/* Debugging console UART */
+		uart@80007000 {
+			status = "okay";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&u2rxtx_c_1_default>;
+			pinctrl-1 = <&u2rxtx_c_1_sleep>;
+		};
+
+		i2c@80128000 {
+			status = "okay";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c2_b_2_default>;
+			pinctrl-1 = <&i2c2_b_2_sleep>;
+
+			imu@68 {
+				compatible = "invensense,mpu6050";
+				reg = <0x68>;
+
+				/* GPIO206 (ACC_INT) */
+				interrupt-parent = <&gpio6>;
+				interrupts = <14 IRQ_TYPE_EDGE_RISING>;
+
+				mount-matrix = "0", "1", "0",
+					      "-1", "0", "0",
+					       "0", "0", "1";
+
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vddio-supply = <&ab8500_ldo_aux8_reg>;
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&imu_default>;
+			};
+		};
+
+		i2c@80110000 {
+			status = "okay";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c3_c_2_default>;
+			pinctrl-1 = <&i2c3_c_2_sleep>;
+
+			touchscreen@4a {
+				compatible = "atmel,maxtouch";
+				reg = <0x4a>;
+
+				/* GPIO218 (TSP_INT_1V8) */
+				interrupt-parent = <&gpio6>;
+				interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&tsp_default>;
+			};
+		};
+
+		prcmu@80157000 {
+			ab8505 {
+				ab8500_usb {
+					pinctrl-names = "default", "sleep";
+					pinctrl-0 = <&usb_a_1_default>;
+					pinctrl-1 = <&usb_a_1_sleep>;
+				};
+
+				ab8505-regulators {
+					ab8500_ldo_aux1 {
+						regulator-name = "sensor_3v";
+						regulator-min-microvolt = <3000000>;
+						regulator-max-microvolt = <3000000>;
+					};
+
+					ab8500_ldo_aux2 {
+						regulator-name = "vreg_tsp_a3v3";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on; /* FIXME */
+					};
+
+					ab8500_ldo_aux3 {
+						regulator-name = "vdd_tf_2v91";
+					};
+
+					ab8500_ldo_aux4 {
+						regulator-name = "key_led_3.3v";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					ab8500_ldo_aux5 {
+						regulator-name = "vreg_tsp_1v8";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-always-on; /* FIXME */
+					};
+
+					ab8500_ldo_aux6 {
+						regulator-name = "touch_key_2.2v";
+						regulator-min-microvolt = <2200000>;
+						regulator-max-microvolt = <2200000>;
+					};
+
+					ab8500_ldo_aux8 {
+						regulator-name = "sensor_1v8";
+					};
+				};
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_default>;
+
+		label = "GPIO Buttons";
+
+		volume-up {
+			label = "Volume Up";
+			/* GPIO67 (VOL_UP) */
+			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		volume-down {
+			label = "Volume Down";
+			/* GPIO92 (VOL_DOWN) */
+			gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		home {
+			label = "Home";
+			/* GPIO91 (HOME_KEY) */
+			gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+		};
+	};
+
+	vibrator {
+		compatible = "gpio-vibrator";
+		/* GPIO195 (MOT_EN) */
+		enable-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&vibrator_default>;
+	};
+
+	/* External LDO for eMMC */
+	vmem_3v3: regulator-vmem {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vmem_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+
+		startup-delay-us = <200>;
+
+		/* GPIO223 (MEM_LDO_EN) */
+		gpio = <&gpio6 31 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&mem_ldo_default>;
+	};
+
+	/* TI TXS0206-29 level translator for 2.9 V */
+	sd_level_translator: regulator-sd-level-translator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "sd-level-translator";
+		regulator-min-microvolt = <2900000>;
+		regulator-max-microvolt = <2900000>;
+
+		startup-delay-us = <200>;
+
+		/* GPIO87 (TXS0206-29_EN) */
+		gpios = <&gpio2 23 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&sd_level_translator_default>;
+	};
+
+	/*
+	 * WL_REG_ON takes WLAN out of reset and enables the internal regulators.
+	 * The voltage specified here is only used to determine the OCR mask,
+	 * the BCM chip is actually connected directly to VBAT.
+	 */
+	wl_reg_on: regulator-wl-reg-on {
+		compatible = "regulator-fixed";
+
+		regulator-name = "wl-reg-on";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+
+		startup-delay-us = <100000>;
+
+		/* GPIO215 (WLAN_EN) */
+		gpio = <&gpio6 23 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_en_default>;
+	};
+};
+
+&pinctrl {
+	gpio-keys {
+		gpio_keys_default: gpio_keys_default {
+			golden_cfg1 {
+				pins = "GPIO67",	/* VOL_UP */
+				       "GPIO91",	/* HOME_KEY */
+				       "GPIO92";	/* VOL_DOWN */
+				ste,config = <&gpio_in_pu>;
+			};
+		};
+	};
+
+	sdi0 {
+		sd_level_translator_default: sd_level_translator_default {
+			golden_cfg1 {
+				pins = "GPIO87_B3";	/* TXS0206-29_EN */
+				ste,config = <&gpio_out_lo>;
+			};
+		};
+	};
+
+	sdi2 {
+		mem_ldo_default: mem_ldo_default {
+			golden_cfg1 {
+				pins = "GPIO223_AH9";	/* MEM_LDO_EN */
+				ste,config = <&gpio_out_hi>;
+			};
+		};
+	};
+
+	imu {
+		imu_default: imu_default {
+			golden_cfg1 {
+				pins = "GPIO206_AG24";	/* ACC_INT */
+				ste,config = <&gpio_in_pd>;
+			};
+		};
+	};
+
+	tsp {
+		tsp_default: tsp_default {
+			golden_cfg1 {
+				pins = "GPIO218_AH11";	/* TSP_INT_1V8 */
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+
+	wlan {
+		wlan_default: wlan_default {
+			golden_cfg1 {
+				pins = "GPIO216_AG12";	/* WLAN_HOST_WAKE */
+				ste,config = <&gpio_in_pd>;
+			};
+		};
+
+		wlan_en_default: wlan_en_default {
+			golden_cfg1 {
+				pins = "GPIO215_AH13";	/* WLAN_EN */
+				ste,config = <&gpio_out_lo>;
+			};
+		};
+	};
+
+	bluetooth {
+		bluetooth_default: bluetooth_default {
+			golden_cfg1 {
+				pins = "GPIO199_AH23",	/* BT_WAKE */
+				       "GPIO222_AJ9";	/* BT_VREG_ON */
+				ste,config = <&gpio_out_lo>;
+			};
+			golden_cfg2 {
+				pins = "GPIO97_D9";	/* BT_HOST_WAKE */
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+
+	vibrator {
+		vibrator_default: vibrator_default {
+			golden_cfg1 {
+				pins = "GPIO195_AG28";	/* MOT_EN */
+				ste,config = <&gpio_out_lo>;
+			};
+		};
+	};
+};
+
+&ab8505_gpio {
+	/* Hog a few default settings */
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio_default>;
+
+	gpio {
+		gpio_default: gpio_default {
+			golden_mux {
+				/* Change unused pins to GPIO mode */
+				function = "gpio";
+				groups = "gpio3_a_1",	/* default: SysClkReq4 */
+					 "gpio14_a_1";	/* default: PWMOut1 */
+			};
+			golden_cfg1 {
+				pins = "GPIO11_B17", "GPIO13_D17", "GPIO50_L4";
+				bias-disable;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts
index 58288aa53fee..c27fa355e5ab 100644
--- a/arch/arm/boot/dts/stm32429i-eval.dts
+++ b/arch/arm/boot/dts/stm32429i-eval.dts
@@ -95,6 +95,13 @@
 		regulator-max-microvolt = <3300000>;
 	};
 
+	vdd_panel: vdd-panel {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_panel";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		green {
@@ -138,6 +145,7 @@
 
 	panel_rgb: panel-rgb {
 		compatible = "ampire,am-480272h3tmqw-t01h";
+		power-supply = <&vdd_panel>;
 		status = "okay";
 		port {
 			panel_in_rgb: endpoint {
diff --git a/arch/arm/boot/dts/stm32f4-pinctrl.dtsi b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi
index 35202896c093..392fa143ce07 100644
--- a/arch/arm/boot/dts/stm32f4-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi
@@ -163,7 +163,7 @@
 				st,bank-name = "GPIOK";
 			};
 
-			usart1_pins_a: usart1@0 {
+			usart1_pins_a: usart1-0 {
 				pins1 {
 					pinmux = <STM32_PINMUX('A', 9, AF7)>; /* USART1_TX */
 					bias-disable;
@@ -176,7 +176,7 @@
 				};
 			};
 
-			usart3_pins_a: usart3@0 {
+			usart3_pins_a: usart3-0 {
 				pins1 {
 					pinmux = <STM32_PINMUX('B', 10, AF7)>; /* USART3_TX */
 					bias-disable;
@@ -189,7 +189,7 @@
 				};
 			};
 
-			usbotg_fs_pins_a: usbotg_fs@0 {
+			usbotg_fs_pins_a: usbotg-fs-0 {
 				pins {
 					pinmux = <STM32_PINMUX('A', 10, AF10)>, /* OTG_FS_ID */
 						 <STM32_PINMUX('A', 11, AF10)>, /* OTG_FS_DM */
@@ -200,7 +200,7 @@
 				};
 			};
 
-			usbotg_fs_pins_b: usbotg_fs@1 {
+			usbotg_fs_pins_b: usbotg-fs-1 {
 				pins {
 					pinmux = <STM32_PINMUX('B', 12, AF12)>, /* OTG_HS_ID */
 						 <STM32_PINMUX('B', 14, AF12)>, /* OTG_HS_DM */
@@ -211,7 +211,7 @@
 				};
 			};
 
-			usbotg_hs_pins_a: usbotg_hs@0 {
+			usbotg_hs_pins_a: usbotg-hs-0 {
 				pins {
 					pinmux = <STM32_PINMUX('H', 4, AF10)>, /* OTG_HS_ULPI_NXT*/
 						 <STM32_PINMUX('I', 11, AF10)>, /* OTG_HS_ULPI_DIR */
@@ -231,7 +231,7 @@
 				};
 			};
 
-			ethernet_mii: mii@0 {
+			ethernet_mii: mii-0 {
 				pins {
 					pinmux = <STM32_PINMUX('G', 13, AF11)>, /* ETH_MII_TXD0_ETH_RMII_TXD0 */
 						 <STM32_PINMUX('G', 14, AF11)>, /* ETH_MII_TXD1_ETH_RMII_TXD1 */
@@ -251,13 +251,13 @@
 				};
 			};
 
-			adc3_in8_pin: adc@200 {
+			adc3_in8_pin: adc-200 {
 				pins {
 					pinmux = <STM32_PINMUX('F', 10, ANALOG)>;
 				};
 			};
 
-			pwm1_pins: pwm@1 {
+			pwm1_pins: pwm-1 {
 				pins {
 					pinmux = <STM32_PINMUX('A', 8, AF1)>, /* TIM1_CH1 */
 						 <STM32_PINMUX('B', 13, AF1)>, /* TIM1_CH1N */
@@ -265,14 +265,14 @@
 				};
 			};
 
-			pwm3_pins: pwm@3 {
+			pwm3_pins: pwm-3 {
 				pins {
 					pinmux = <STM32_PINMUX('B', 4, AF2)>, /* TIM3_CH1 */
 						 <STM32_PINMUX('B', 5, AF2)>; /* TIM3_CH2 */
 				};
 			};
 
-			i2c1_pins: i2c1@0 {
+			i2c1_pins: i2c1-0 {
 				pins {
 					pinmux = <STM32_PINMUX('B', 9, AF4)>, /* I2C1_SDA */
 						 <STM32_PINMUX('B', 6, AF4)>; /* I2C1_SCL */
@@ -282,7 +282,7 @@
 				};
 			};
 
-			ltdc_pins: ltdc@0 {
+			ltdc_pins: ltdc-0 {
 				pins {
 					pinmux = <STM32_PINMUX('I', 12, AF14)>, /* LCD_HSYNC */
 						 <STM32_PINMUX('I', 13, AF14)>, /* LCD_VSYNC */
@@ -316,7 +316,7 @@
 				};
 			};
 
-			dcmi_pins: dcmi@0 {
+			dcmi_pins: dcmi-0 {
 				pins {
 					pinmux = <STM32_PINMUX('A', 4, AF13)>, /* DCMI_HSYNC */
 						 <STM32_PINMUX('B', 7, AF13)>, /* DCMI_VSYNC */
@@ -339,7 +339,7 @@
 				};
 			};
 
-			sdio_pins: sdio_pins@0 {
+			sdio_pins: sdio-pins-0 {
 				pins {
 					pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDIO_D0 */
 						 <STM32_PINMUX('C', 9, AF12)>, /* SDIO_D1 */
@@ -352,7 +352,7 @@
 				};
 			};
 
-			sdio_pins_od: sdio_pins_od@0 {
+			sdio_pins_od: sdio-pins-od-0 {
 				pins1 {
 					pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDIO_D0 */
 						 <STM32_PINMUX('C', 9, AF12)>, /* SDIO_D1 */
diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index 5c8a826b3195..d7770699feb5 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -80,7 +80,7 @@
 	};
 
 	soc {
-		romem: nvmem@1fff7800 {
+		romem: efuse@1fff7800 {
 			compatible = "st,stm32f4-otp";
 			reg = <0x1fff7800 0x400>;
 			#address-cells = <1>;
@@ -318,7 +318,6 @@
 			compatible = "st,stm32-rtc";
 			reg = <0x40002800 0x400>;
 			clocks = <&rcc 1 CLK_RTC>;
-			clock-names = "ck_rtc";
 			assigned-clocks = <&rcc 1 CLK_RTC>;
 			assigned-clock-parents = <&rcc 1 CLK_LSE>;
 			interrupt-parent = <&exti>;
@@ -789,7 +788,6 @@
 		rng: rng@50060800 {
 			compatible = "st,stm32-rng";
 			reg = <0x50060800 0x400>;
-			interrupts = <80>;
 			clocks = <&rcc 0 STM32F4_AHB2_CLOCK(RNG)>;
 
 		};
diff --git a/arch/arm/boot/dts/stm32f469-disco.dts b/arch/arm/boot/dts/stm32f469-disco.dts
index f3ce477b7bae..9397db0c43de 100644
--- a/arch/arm/boot/dts/stm32f469-disco.dts
+++ b/arch/arm/boot/dts/stm32f469-disco.dts
@@ -76,6 +76,13 @@
 		regulator-max-microvolt = <3300000>;
 	};
 
+	vdd_dsi: vdd-dsi {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_dsi";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
 	soc {
 		dma-ranges = <0xc0000000 0x0 0x10000000>;
 	};
@@ -155,6 +162,7 @@
 		compatible = "orisetech,otm8009a";
 		reg = <0>; /* dsi virtual channel (0..3) */
 		reset-gpios = <&gpioh 7 GPIO_ACTIVE_LOW>;
+		power-supply = <&vdd_dsi>;
 		status = "okay";
 
 		port {
diff --git a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
index 9314128df185..fe4cfda72a47 100644
--- a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
@@ -127,7 +127,7 @@
 				st,bank-name = "GPIOK";
 			};
 
-			cec_pins_a: cec@0 {
+			cec_pins_a: cec-0 {
 				pins {
 					pinmux = <STM32_PINMUX('A', 15, AF4)>; /* HDMI CEC */
 					slew-rate = <0>;
@@ -136,7 +136,7 @@
 				};
 			};
 
-			usart1_pins_a: usart1@0 {
+			usart1_pins_a: usart1-0 {
 				pins1 {
 					pinmux = <STM32_PINMUX('A', 9, AF7)>; /* USART1_TX */
 					bias-disable;
@@ -149,7 +149,7 @@
 				};
 			};
 
-			usart1_pins_b: usart1@1 {
+			usart1_pins_b: usart1-1 {
 				pins1 {
 					pinmux = <STM32_PINMUX('A', 9, AF7)>; /* USART1_TX */
 					bias-disable;
@@ -162,7 +162,7 @@
 				};
 			};
 
-			i2c1_pins_b: i2c1@0 {
+			i2c1_pins_b: i2c1-0 {
 				pins {
 					pinmux = <STM32_PINMUX('B', 9, AF4)>, /* I2C1 SDA */
 						 <STM32_PINMUX('B', 8, AF4)>; /* I2C1 SCL */
@@ -172,7 +172,7 @@
 				};
 			};
 
-			usbotg_hs_pins_a: usbotg-hs@0 {
+			usbotg_hs_pins_a: usbotg-hs-0 {
 				pins {
 					pinmux = <STM32_PINMUX('H', 4, AF10)>, /* OTG_HS_ULPI_NXT */
 						 <STM32_PINMUX('I', 11, AF10)>, /* OTG_HS_ULPI_DIR */
@@ -192,7 +192,7 @@
 				};
 			};
 
-			usbotg_hs_pins_b: usbotg-hs@1 {
+			usbotg_hs_pins_b: usbotg-hs-1 {
 				pins {
 					pinmux = <STM32_PINMUX('H', 4, AF10)>, /* OTG_HS_ULPI_NXT */
 						 <STM32_PINMUX('C', 2, AF10)>, /* OTG_HS_ULPI_DIR */
@@ -212,7 +212,7 @@
 				};
 			};
 
-			usbotg_fs_pins_a: usbotg-fs@0 {
+			usbotg_fs_pins_a: usbotg-fs-0 {
 				pins {
 					pinmux = <STM32_PINMUX('A', 10, AF10)>, /* OTG_FS_ID */
 						 <STM32_PINMUX('A', 11, AF10)>, /* OTG_FS_DM */
@@ -223,7 +223,7 @@
 				};
 			};
 
-			sdio_pins_a: sdio_pins_a@0 {
+			sdio_pins_a: sdio-pins-a-0 {
 				pins {
 					pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1 D0 */
 						 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1 D1 */
@@ -236,7 +236,7 @@
 				};
 			};
 
-			sdio_pins_od_a: sdio_pins_od_a@0 {
+			sdio_pins_od_a: sdio-pins-od-a-0 {
 				pins1 {
 					pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1 D0 */
 						 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1 D1 */
@@ -254,7 +254,7 @@
 				};
 			};
 
-			sdio_pins_b: sdio_pins_b@0 {
+			sdio_pins_b: sdio-pins-b-0 {
 				pins {
 					pinmux = <STM32_PINMUX('G', 9, AF11)>, /* SDMMC2 D0 */
 						 <STM32_PINMUX('G', 10, AF11)>, /* SDMMC2 D1 */
@@ -267,7 +267,7 @@
 				};
 			};
 
-			sdio_pins_od_b: sdio_pins_od_b@0 {
+			sdio_pins_od_b: sdio-pins-od-b-0 {
 				pins1 {
 					pinmux = <STM32_PINMUX('G', 9, AF11)>, /* SDMMC2 D0 */
 						 <STM32_PINMUX('G', 10, AF11)>, /* SDMMC2 D1 */
diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi
index d26f93f8b9c2..93c063796780 100644
--- a/arch/arm/boot/dts/stm32f746.dtsi
+++ b/arch/arm/boot/dts/stm32f746.dtsi
@@ -300,7 +300,6 @@
 			compatible = "st,stm32-rtc";
 			reg = <0x40002800 0x400>;
 			clocks = <&rcc 1 CLK_RTC>;
-			clock-names = "ck_rtc";
 			assigned-clocks = <&rcc 1 CLK_RTC>;
 			assigned-clock-parents = <&rcc 1 CLK_LSE>;
 			interrupt-parent = <&exti>;
@@ -587,7 +586,7 @@
 			assigned-clock-rates = <1000000>;
 		};
 
-		dma1: dma@40026000 {
+		dma1: dma-controller@40026000 {
 			compatible = "st,stm32-dma";
 			reg = <0x40026000 0x400>;
 			interrupts = <11>,
@@ -603,7 +602,7 @@
 			status = "disabled";
 		};
 
-		dma2: dma@40026400 {
+		dma2: dma-controller@40026400 {
 			compatible = "st,stm32-dma";
 			reg = <0x40026400 0x400>;
 			interrupts = <56>,
diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi
index c065266ee377..05eb02e6d083 100644
--- a/arch/arm/boot/dts/stm32h743.dtsi
+++ b/arch/arm/boot/dts/stm32h743.dtsi
@@ -231,7 +231,7 @@
 			status = "disabled";
 		};
 
-		dma1: dma@40020000 {
+		dma1: dma-controller@40020000 {
 			compatible = "st,stm32-dma";
 			reg = <0x40020000 0x400>;
 			interrupts = <11>,
@@ -249,7 +249,7 @@
 			status = "disabled";
 		};
 
-		dma2: dma@40020400 {
+		dma2: dma-controller@40020400 {
 			compatible = "st,stm32-dma";
 			reg = <0x40020400 0x400>;
 			interrupts = <56>,
@@ -329,7 +329,7 @@
 			status = "disabled";
 		};
 
-		mdma1: dma@52000000 {
+		mdma1: dma-controller@52000000 {
 			compatible = "st,stm32h7-mdma";
 			reg = <0x52000000 0x1000>;
 			interrupts = <122>;
diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
new file mode 100644
index 000000000000..0237d4ddaa92
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
@@ -0,0 +1,1092 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
+ * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
+ */
+#include <dt-bindings/pinctrl/stm32-pinfunc.h>
+
+&pinctrl {
+	adc1_in6_pins_a: adc1-in6 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 12, ANALOG)>;
+		};
+	};
+
+	adc12_ain_pins_a: adc12-ain-0 {
+		pins {
+			pinmux = <STM32_PINMUX('C', 3, ANALOG)>, /* ADC1 in13 */
+				 <STM32_PINMUX('F', 12, ANALOG)>, /* ADC1 in6 */
+				 <STM32_PINMUX('F', 13, ANALOG)>, /* ADC2 in2 */
+				 <STM32_PINMUX('F', 14, ANALOG)>; /* ADC2 in6 */
+		};
+	};
+
+	adc12_usb_cc_pins_a: adc12-usb-cc-pins-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 4, ANALOG)>, /* ADC12 in18 */
+				 <STM32_PINMUX('A', 5, ANALOG)>; /* ADC12 in19 */
+		};
+	};
+
+	cec_pins_a: cec-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 15, AF4)>;
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	cec_pins_sleep_a: cec-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 15, ANALOG)>; /* HDMI_CEC */
+		};
+	};
+
+	cec_pins_b: cec-1 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 6, AF5)>;
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	cec_pins_sleep_b: cec-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 6, ANALOG)>; /* HDMI_CEC */
+		};
+	};
+
+	dac_ch1_pins_a: dac-ch1 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 4, ANALOG)>;
+		};
+	};
+
+	dac_ch2_pins_a: dac-ch2 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 5, ANALOG)>;
+		};
+	};
+
+	dcmi_pins_a: dcmi-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 8,  AF13)>,/* DCMI_HSYNC */
+				 <STM32_PINMUX('B', 7,  AF13)>,/* DCMI_VSYNC */
+				 <STM32_PINMUX('A', 6,  AF13)>,/* DCMI_PIXCLK */
+				 <STM32_PINMUX('H', 9,  AF13)>,/* DCMI_D0 */
+				 <STM32_PINMUX('H', 10, AF13)>,/* DCMI_D1 */
+				 <STM32_PINMUX('H', 11, AF13)>,/* DCMI_D2 */
+				 <STM32_PINMUX('H', 12, AF13)>,/* DCMI_D3 */
+				 <STM32_PINMUX('H', 14, AF13)>,/* DCMI_D4 */
+				 <STM32_PINMUX('I', 4,  AF13)>,/* DCMI_D5 */
+				 <STM32_PINMUX('B', 8,  AF13)>,/* DCMI_D6 */
+				 <STM32_PINMUX('E', 6,  AF13)>,/* DCMI_D7 */
+				 <STM32_PINMUX('I', 1,  AF13)>,/* DCMI_D8 */
+				 <STM32_PINMUX('H', 7,  AF13)>,/* DCMI_D9 */
+				 <STM32_PINMUX('I', 3,  AF13)>,/* DCMI_D10 */
+				 <STM32_PINMUX('H', 15, AF13)>;/* DCMI_D11 */
+			bias-disable;
+		};
+	};
+
+	dcmi_sleep_pins_a: dcmi-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 8,  ANALOG)>,/* DCMI_HSYNC */
+				 <STM32_PINMUX('B', 7,  ANALOG)>,/* DCMI_VSYNC */
+				 <STM32_PINMUX('A', 6,  ANALOG)>,/* DCMI_PIXCLK */
+				 <STM32_PINMUX('H', 9,  ANALOG)>,/* DCMI_D0 */
+				 <STM32_PINMUX('H', 10, ANALOG)>,/* DCMI_D1 */
+				 <STM32_PINMUX('H', 11, ANALOG)>,/* DCMI_D2 */
+				 <STM32_PINMUX('H', 12, ANALOG)>,/* DCMI_D3 */
+				 <STM32_PINMUX('H', 14, ANALOG)>,/* DCMI_D4 */
+				 <STM32_PINMUX('I', 4,  ANALOG)>,/* DCMI_D5 */
+				 <STM32_PINMUX('B', 8,  ANALOG)>,/* DCMI_D6 */
+				 <STM32_PINMUX('E', 6,  ANALOG)>,/* DCMI_D7 */
+				 <STM32_PINMUX('I', 1,  ANALOG)>,/* DCMI_D8 */
+				 <STM32_PINMUX('H', 7,  ANALOG)>,/* DCMI_D9 */
+				 <STM32_PINMUX('I', 3,  ANALOG)>,/* DCMI_D10 */
+				 <STM32_PINMUX('H', 15, ANALOG)>;/* DCMI_D11 */
+		};
+	};
+
+	ethernet0_rgmii_pins_a: rgmii-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */
+				 <STM32_PINMUX('G', 4, AF11)>, /* ETH_RGMII_GTX_CLK */
+				 <STM32_PINMUX('G', 13, AF11)>, /* ETH_RGMII_TXD0 */
+				 <STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */
+				 <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */
+				 <STM32_PINMUX('E', 2, AF11)>, /* ETH_RGMII_TXD3 */
+				 <STM32_PINMUX('B', 11, AF11)>, /* ETH_RGMII_TX_CTL */
+				 <STM32_PINMUX('C', 1, AF11)>; /* ETH_MDC */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <2>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('A', 2, AF11)>; /* ETH_MDIO */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */
+				 <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */
+				 <STM32_PINMUX('B', 0, AF11)>, /* ETH_RGMII_RXD2 */
+				 <STM32_PINMUX('B', 1, AF11)>, /* ETH_RGMII_RXD3 */
+				 <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */
+				 <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */
+			bias-disable;
+		};
+	};
+
+	ethernet0_rgmii_pins_sleep_a: rgmii-sleep-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_RGMII_CLK125 */
+				 <STM32_PINMUX('G', 4, ANALOG)>, /* ETH_RGMII_GTX_CLK */
+				 <STM32_PINMUX('G', 13, ANALOG)>, /* ETH_RGMII_TXD0 */
+				 <STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RGMII_TXD1 */
+				 <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_TXD2 */
+				 <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_TXD3 */
+				 <STM32_PINMUX('B', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */
+				 <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */
+				 <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_MDC */
+				 <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */
+				 <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */
+				 <STM32_PINMUX('B', 0, ANALOG)>, /* ETH_RGMII_RXD2 */
+				 <STM32_PINMUX('B', 1, ANALOG)>, /* ETH_RGMII_RXD3 */
+				 <STM32_PINMUX('A', 1, ANALOG)>, /* ETH_RGMII_RX_CLK */
+				 <STM32_PINMUX('A', 7, ANALOG)>; /* ETH_RGMII_RX_CTL */
+		};
+	};
+
+	fmc_pins_a: fmc-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('D', 4, AF12)>, /* FMC_NOE */
+				 <STM32_PINMUX('D', 5, AF12)>, /* FMC_NWE */
+				 <STM32_PINMUX('D', 11, AF12)>, /* FMC_A16_FMC_CLE */
+				 <STM32_PINMUX('D', 12, AF12)>, /* FMC_A17_FMC_ALE */
+				 <STM32_PINMUX('D', 14, AF12)>, /* FMC_D0 */
+				 <STM32_PINMUX('D', 15, AF12)>, /* FMC_D1 */
+				 <STM32_PINMUX('D', 0, AF12)>, /* FMC_D2 */
+				 <STM32_PINMUX('D', 1, AF12)>, /* FMC_D3 */
+				 <STM32_PINMUX('E', 7, AF12)>, /* FMC_D4 */
+				 <STM32_PINMUX('E', 8, AF12)>, /* FMC_D5 */
+				 <STM32_PINMUX('E', 9, AF12)>, /* FMC_D6 */
+				 <STM32_PINMUX('E', 10, AF12)>, /* FMC_D7 */
+				 <STM32_PINMUX('G', 9, AF12)>; /* FMC_NE2_FMC_NCE */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('D', 6, AF12)>; /* FMC_NWAIT */
+			bias-pull-up;
+		};
+	};
+
+	fmc_sleep_pins_a: fmc-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 4, ANALOG)>, /* FMC_NOE */
+				 <STM32_PINMUX('D', 5, ANALOG)>, /* FMC_NWE */
+				 <STM32_PINMUX('D', 11, ANALOG)>, /* FMC_A16_FMC_CLE */
+				 <STM32_PINMUX('D', 12, ANALOG)>, /* FMC_A17_FMC_ALE */
+				 <STM32_PINMUX('D', 14, ANALOG)>, /* FMC_D0 */
+				 <STM32_PINMUX('D', 15, ANALOG)>, /* FMC_D1 */
+				 <STM32_PINMUX('D', 0, ANALOG)>, /* FMC_D2 */
+				 <STM32_PINMUX('D', 1, ANALOG)>, /* FMC_D3 */
+				 <STM32_PINMUX('E', 7, ANALOG)>, /* FMC_D4 */
+				 <STM32_PINMUX('E', 8, ANALOG)>, /* FMC_D5 */
+				 <STM32_PINMUX('E', 9, ANALOG)>, /* FMC_D6 */
+				 <STM32_PINMUX('E', 10, ANALOG)>, /* FMC_D7 */
+				 <STM32_PINMUX('D', 6, ANALOG)>, /* FMC_NWAIT */
+				 <STM32_PINMUX('G', 9, ANALOG)>; /* FMC_NE2_FMC_NCE */
+		};
+	};
+
+	i2c1_pins_a: i2c1-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */
+				 <STM32_PINMUX('F', 15, AF5)>; /* I2C1_SDA */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	i2c1_pins_sleep_a: i2c1-1 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 12, ANALOG)>, /* I2C1_SCL */
+				 <STM32_PINMUX('F', 15, ANALOG)>; /* I2C1_SDA */
+		};
+	};
+
+	i2c1_pins_b: i2c1-2 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 14, AF5)>, /* I2C1_SCL */
+				 <STM32_PINMUX('F', 15, AF5)>; /* I2C1_SDA */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	i2c1_pins_sleep_b: i2c1-3 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 14, ANALOG)>, /* I2C1_SCL */
+				 <STM32_PINMUX('F', 15, ANALOG)>; /* I2C1_SDA */
+		};
+	};
+
+	i2c2_pins_a: i2c2-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 4, AF4)>, /* I2C2_SCL */
+				 <STM32_PINMUX('H', 5, AF4)>; /* I2C2_SDA */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	i2c2_pins_sleep_a: i2c2-1 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 4, ANALOG)>, /* I2C2_SCL */
+				 <STM32_PINMUX('H', 5, ANALOG)>; /* I2C2_SDA */
+		};
+	};
+
+	i2c2_pins_b1: i2c2-2 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 5, AF4)>; /* I2C2_SDA */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	i2c2_pins_sleep_b1: i2c2-3 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 5, ANALOG)>; /* I2C2_SDA */
+		};
+	};
+
+	i2c5_pins_a: i2c5-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 11, AF4)>, /* I2C5_SCL */
+				 <STM32_PINMUX('A', 12, AF4)>; /* I2C5_SDA */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	i2c5_pins_sleep_a: i2c5-1 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 11, ANALOG)>, /* I2C5_SCL */
+				 <STM32_PINMUX('A', 12, ANALOG)>; /* I2C5_SDA */
+
+		};
+	};
+
+	i2s2_pins_a: i2s2-0 {
+		pins {
+			pinmux = <STM32_PINMUX('I', 3, AF5)>, /* I2S2_SDO */
+				 <STM32_PINMUX('B', 9, AF5)>, /* I2S2_WS */
+				 <STM32_PINMUX('A', 9, AF5)>; /* I2S2_CK */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-disable;
+		};
+	};
+
+	i2s2_pins_sleep_a: i2s2-1 {
+		pins {
+			pinmux = <STM32_PINMUX('I', 3, ANALOG)>, /* I2S2_SDO */
+				 <STM32_PINMUX('B', 9, ANALOG)>, /* I2S2_WS */
+				 <STM32_PINMUX('A', 9, ANALOG)>; /* I2S2_CK */
+		};
+	};
+
+	ltdc_pins_a: ltdc-a-0 {
+		pins {
+			pinmux = <STM32_PINMUX('G',  7, AF14)>, /* LCD_CLK */
+				 <STM32_PINMUX('I', 10, AF14)>, /* LCD_HSYNC */
+				 <STM32_PINMUX('I',  9, AF14)>, /* LCD_VSYNC */
+				 <STM32_PINMUX('F', 10, AF14)>, /* LCD_DE */
+				 <STM32_PINMUX('H',  2, AF14)>, /* LCD_R0 */
+				 <STM32_PINMUX('H',  3, AF14)>, /* LCD_R1 */
+				 <STM32_PINMUX('H',  8, AF14)>, /* LCD_R2 */
+				 <STM32_PINMUX('H',  9, AF14)>, /* LCD_R3 */
+				 <STM32_PINMUX('H', 10, AF14)>, /* LCD_R4 */
+				 <STM32_PINMUX('C',  0, AF14)>, /* LCD_R5 */
+				 <STM32_PINMUX('H', 12, AF14)>, /* LCD_R6 */
+				 <STM32_PINMUX('E', 15, AF14)>, /* LCD_R7 */
+				 <STM32_PINMUX('E',  5, AF14)>, /* LCD_G0 */
+				 <STM32_PINMUX('E',  6, AF14)>, /* LCD_G1 */
+				 <STM32_PINMUX('H', 13, AF14)>, /* LCD_G2 */
+				 <STM32_PINMUX('H', 14, AF14)>, /* LCD_G3 */
+				 <STM32_PINMUX('H', 15, AF14)>, /* LCD_G4 */
+				 <STM32_PINMUX('I',  0, AF14)>, /* LCD_G5 */
+				 <STM32_PINMUX('I',  1, AF14)>, /* LCD_G6 */
+				 <STM32_PINMUX('I',  2, AF14)>, /* LCD_G7 */
+				 <STM32_PINMUX('D',  9, AF14)>, /* LCD_B0 */
+				 <STM32_PINMUX('G', 12, AF14)>, /* LCD_B1 */
+				 <STM32_PINMUX('G', 10, AF14)>, /* LCD_B2 */
+				 <STM32_PINMUX('D', 10, AF14)>, /* LCD_B3 */
+				 <STM32_PINMUX('I',  4, AF14)>, /* LCD_B4 */
+				 <STM32_PINMUX('A',  3, AF14)>, /* LCD_B5 */
+				 <STM32_PINMUX('B',  8, AF14)>, /* LCD_B6 */
+				 <STM32_PINMUX('D',  8, AF14)>; /* LCD_B7 */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+	};
+
+	ltdc_pins_sleep_a: ltdc-a-1 {
+		pins {
+			pinmux = <STM32_PINMUX('G',  7, ANALOG)>, /* LCD_CLK */
+				 <STM32_PINMUX('I', 10, ANALOG)>, /* LCD_HSYNC */
+				 <STM32_PINMUX('I',  9, ANALOG)>, /* LCD_VSYNC */
+				 <STM32_PINMUX('F', 10, ANALOG)>, /* LCD_DE */
+				 <STM32_PINMUX('H',  2, ANALOG)>, /* LCD_R0 */
+				 <STM32_PINMUX('H',  3, ANALOG)>, /* LCD_R1 */
+				 <STM32_PINMUX('H',  8, ANALOG)>, /* LCD_R2 */
+				 <STM32_PINMUX('H',  9, ANALOG)>, /* LCD_R3 */
+				 <STM32_PINMUX('H', 10, ANALOG)>, /* LCD_R4 */
+				 <STM32_PINMUX('C',  0, ANALOG)>, /* LCD_R5 */
+				 <STM32_PINMUX('H', 12, ANALOG)>, /* LCD_R6 */
+				 <STM32_PINMUX('E', 15, ANALOG)>, /* LCD_R7 */
+				 <STM32_PINMUX('E',  5, ANALOG)>, /* LCD_G0 */
+				 <STM32_PINMUX('E',  6, ANALOG)>, /* LCD_G1 */
+				 <STM32_PINMUX('H', 13, ANALOG)>, /* LCD_G2 */
+				 <STM32_PINMUX('H', 14, ANALOG)>, /* LCD_G3 */
+				 <STM32_PINMUX('H', 15, ANALOG)>, /* LCD_G4 */
+				 <STM32_PINMUX('I',  0, ANALOG)>, /* LCD_G5 */
+				 <STM32_PINMUX('I',  1, ANALOG)>, /* LCD_G6 */
+				 <STM32_PINMUX('I',  2, ANALOG)>, /* LCD_G7 */
+				 <STM32_PINMUX('D',  9, ANALOG)>, /* LCD_B0 */
+				 <STM32_PINMUX('G', 12, ANALOG)>, /* LCD_B1 */
+				 <STM32_PINMUX('G', 10, ANALOG)>, /* LCD_B2 */
+				 <STM32_PINMUX('D', 10, ANALOG)>, /* LCD_B3 */
+				 <STM32_PINMUX('I',  4, ANALOG)>, /* LCD_B4 */
+				 <STM32_PINMUX('A',  3, ANALOG)>, /* LCD_B5 */
+				 <STM32_PINMUX('B',  8, ANALOG)>, /* LCD_B6 */
+				 <STM32_PINMUX('D',  8, ANALOG)>; /* LCD_B7 */
+		};
+	};
+
+	ltdc_pins_b: ltdc-b-0 {
+		pins {
+			pinmux = <STM32_PINMUX('I', 14, AF14)>, /* LCD_CLK */
+				 <STM32_PINMUX('I', 12, AF14)>, /* LCD_HSYNC */
+				 <STM32_PINMUX('I', 13, AF14)>, /* LCD_VSYNC */
+				 <STM32_PINMUX('K',  7, AF14)>, /* LCD_DE */
+				 <STM32_PINMUX('I', 15, AF14)>, /* LCD_R0 */
+				 <STM32_PINMUX('J',  0, AF14)>, /* LCD_R1 */
+				 <STM32_PINMUX('J',  1, AF14)>, /* LCD_R2 */
+				 <STM32_PINMUX('J',  2, AF14)>, /* LCD_R3 */
+				 <STM32_PINMUX('J',  3, AF14)>, /* LCD_R4 */
+				 <STM32_PINMUX('J',  4, AF14)>, /* LCD_R5 */
+				 <STM32_PINMUX('J',  5, AF14)>, /* LCD_R6 */
+				 <STM32_PINMUX('J',  6, AF14)>, /* LCD_R7 */
+				 <STM32_PINMUX('J',  7, AF14)>, /* LCD_G0 */
+				 <STM32_PINMUX('J',  8, AF14)>, /* LCD_G1 */
+				 <STM32_PINMUX('J',  9, AF14)>, /* LCD_G2 */
+				 <STM32_PINMUX('J', 10, AF14)>, /* LCD_G3 */
+				 <STM32_PINMUX('J', 11, AF14)>, /* LCD_G4 */
+				 <STM32_PINMUX('K',  0, AF14)>, /* LCD_G5 */
+				 <STM32_PINMUX('K',  1, AF14)>, /* LCD_G6 */
+				 <STM32_PINMUX('K',  2, AF14)>, /* LCD_G7 */
+				 <STM32_PINMUX('J', 12, AF14)>, /* LCD_B0 */
+				 <STM32_PINMUX('J', 13, AF14)>, /* LCD_B1 */
+				 <STM32_PINMUX('J', 14, AF14)>, /* LCD_B2 */
+				 <STM32_PINMUX('J', 15, AF14)>, /* LCD_B3 */
+				 <STM32_PINMUX('K',  3, AF14)>, /* LCD_B4 */
+				 <STM32_PINMUX('K',  4, AF14)>, /* LCD_B5 */
+				 <STM32_PINMUX('K',  5, AF14)>, /* LCD_B6 */
+				 <STM32_PINMUX('K',  6, AF14)>; /* LCD_B7 */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+	};
+
+	ltdc_pins_sleep_b: ltdc-b-1 {
+		pins {
+			pinmux = <STM32_PINMUX('I', 14, ANALOG)>, /* LCD_CLK */
+				 <STM32_PINMUX('I', 12, ANALOG)>, /* LCD_HSYNC */
+				 <STM32_PINMUX('I', 13, ANALOG)>, /* LCD_VSYNC */
+				 <STM32_PINMUX('K',  7, ANALOG)>, /* LCD_DE */
+				 <STM32_PINMUX('I', 15, ANALOG)>, /* LCD_R0 */
+				 <STM32_PINMUX('J',  0, ANALOG)>, /* LCD_R1 */
+				 <STM32_PINMUX('J',  1, ANALOG)>, /* LCD_R2 */
+				 <STM32_PINMUX('J',  2, ANALOG)>, /* LCD_R3 */
+				 <STM32_PINMUX('J',  3, ANALOG)>, /* LCD_R4 */
+				 <STM32_PINMUX('J',  4, ANALOG)>, /* LCD_R5 */
+				 <STM32_PINMUX('J',  5, ANALOG)>, /* LCD_R6 */
+				 <STM32_PINMUX('J',  6, ANALOG)>, /* LCD_R7 */
+				 <STM32_PINMUX('J',  7, ANALOG)>, /* LCD_G0 */
+				 <STM32_PINMUX('J',  8, ANALOG)>, /* LCD_G1 */
+				 <STM32_PINMUX('J',  9, ANALOG)>, /* LCD_G2 */
+				 <STM32_PINMUX('J', 10, ANALOG)>, /* LCD_G3 */
+				 <STM32_PINMUX('J', 11, ANALOG)>, /* LCD_G4 */
+				 <STM32_PINMUX('K',  0, ANALOG)>, /* LCD_G5 */
+				 <STM32_PINMUX('K',  1, ANALOG)>, /* LCD_G6 */
+				 <STM32_PINMUX('K',  2, ANALOG)>, /* LCD_G7 */
+				 <STM32_PINMUX('J', 12, ANALOG)>, /* LCD_B0 */
+				 <STM32_PINMUX('J', 13, ANALOG)>, /* LCD_B1 */
+				 <STM32_PINMUX('J', 14, ANALOG)>, /* LCD_B2 */
+				 <STM32_PINMUX('J', 15, ANALOG)>, /* LCD_B3 */
+				 <STM32_PINMUX('K',  3, ANALOG)>, /* LCD_B4 */
+				 <STM32_PINMUX('K',  4, ANALOG)>, /* LCD_B5 */
+				 <STM32_PINMUX('K',  5, ANALOG)>, /* LCD_B6 */
+				 <STM32_PINMUX('K',  6, ANALOG)>; /* LCD_B7 */
+		};
+	};
+
+	m_can1_pins_a: m-can1-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('H', 13, AF9)>; /* CAN1_TX */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('I', 9, AF9)>; /* CAN1_RX */
+			bias-disable;
+		};
+	};
+
+	m_can1_sleep_pins_a: m_can1-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 13, ANALOG)>, /* CAN1_TX */
+				 <STM32_PINMUX('I', 9, ANALOG)>; /* CAN1_RX */
+		};
+	};
+
+	pwm1_pins_a: pwm1-0 {
+		pins {
+			pinmux = <STM32_PINMUX('E', 9, AF1)>, /* TIM1_CH1 */
+				 <STM32_PINMUX('E', 11, AF1)>, /* TIM1_CH2 */
+				 <STM32_PINMUX('E', 14, AF1)>; /* TIM1_CH4 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm1_sleep_pins_a: pwm1-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('E', 9, ANALOG)>, /* TIM1_CH1 */
+				 <STM32_PINMUX('E', 11, ANALOG)>, /* TIM1_CH2 */
+				 <STM32_PINMUX('E', 14, ANALOG)>; /* TIM1_CH4 */
+		};
+	};
+
+	pwm2_pins_a: pwm2-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 3, AF1)>; /* TIM2_CH4 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm2_sleep_pins_a: pwm2-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 3, ANALOG)>; /* TIM2_CH4 */
+		};
+	};
+
+	pwm3_pins_a: pwm3-0 {
+		pins {
+			pinmux = <STM32_PINMUX('C', 7, AF2)>; /* TIM3_CH2 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm3_sleep_pins_a: pwm3-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('C', 7, ANALOG)>; /* TIM3_CH2 */
+		};
+	};
+
+	pwm4_pins_a: pwm4-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 14, AF2)>, /* TIM4_CH3 */
+				 <STM32_PINMUX('D', 15, AF2)>; /* TIM4_CH4 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm4_sleep_pins_a: pwm4-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 14, ANALOG)>, /* TIM4_CH3 */
+				 <STM32_PINMUX('D', 15, ANALOG)>; /* TIM4_CH4 */
+		};
+	};
+
+	pwm4_pins_b: pwm4-1 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 13, AF2)>; /* TIM4_CH2 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm4_sleep_pins_b: pwm4-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 13, ANALOG)>; /* TIM4_CH2 */
+		};
+	};
+
+	pwm5_pins_a: pwm5-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 11, AF2)>; /* TIM5_CH2 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm5_sleep_pins_a: pwm5-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 11, ANALOG)>; /* TIM5_CH2 */
+		};
+	};
+
+	pwm8_pins_a: pwm8-0 {
+		pins {
+			pinmux = <STM32_PINMUX('I', 2, AF3)>; /* TIM8_CH4 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm8_sleep_pins_a: pwm8-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('I', 2, ANALOG)>; /* TIM8_CH4 */
+		};
+	};
+
+	pwm12_pins_a: pwm12-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 6, AF2)>; /* TIM12_CH1 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm12_sleep_pins_a: pwm12-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 6, ANALOG)>; /* TIM12_CH1 */
+		};
+	};
+
+	qspi_clk_pins_a: qspi-clk-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 10, AF9)>; /* QSPI_CLK */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <3>;
+		};
+	};
+
+	qspi_clk_sleep_pins_a: qspi-clk-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 10, ANALOG)>; /* QSPI_CLK */
+		};
+	};
+
+	qspi_bk1_pins_a: qspi-bk1-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 8, AF10)>, /* QSPI_BK1_IO0 */
+				 <STM32_PINMUX('F', 9, AF10)>, /* QSPI_BK1_IO1 */
+				 <STM32_PINMUX('F', 7, AF9)>, /* QSPI_BK1_IO2 */
+				 <STM32_PINMUX('F', 6, AF9)>; /* QSPI_BK1_IO3 */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 6, AF10)>; /* QSPI_BK1_NCS */
+			bias-pull-up;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+	};
+
+	qspi_bk1_sleep_pins_a: qspi-bk1-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 8, ANALOG)>, /* QSPI_BK1_IO0 */
+				 <STM32_PINMUX('F', 9, ANALOG)>, /* QSPI_BK1_IO1 */
+				 <STM32_PINMUX('F', 7, ANALOG)>, /* QSPI_BK1_IO2 */
+				 <STM32_PINMUX('F', 6, ANALOG)>, /* QSPI_BK1_IO3 */
+				 <STM32_PINMUX('B', 6, ANALOG)>; /* QSPI_BK1_NCS */
+		};
+	};
+
+	qspi_bk2_pins_a: qspi-bk2-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('H', 2, AF9)>, /* QSPI_BK2_IO0 */
+				 <STM32_PINMUX('H', 3, AF9)>, /* QSPI_BK2_IO1 */
+				 <STM32_PINMUX('G', 10, AF11)>, /* QSPI_BK2_IO2 */
+				 <STM32_PINMUX('G', 7, AF11)>; /* QSPI_BK2_IO3 */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('C', 0, AF10)>; /* QSPI_BK2_NCS */
+			bias-pull-up;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+	};
+
+	qspi_bk2_sleep_pins_a: qspi-bk2-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 2, ANALOG)>, /* QSPI_BK2_IO0 */
+				 <STM32_PINMUX('H', 3, ANALOG)>, /* QSPI_BK2_IO1 */
+				 <STM32_PINMUX('G', 10, ANALOG)>, /* QSPI_BK2_IO2 */
+				 <STM32_PINMUX('G', 7, ANALOG)>, /* QSPI_BK2_IO3 */
+				 <STM32_PINMUX('C', 0, ANALOG)>; /* QSPI_BK2_NCS */
+		};
+	};
+
+	sai2a_pins_a: sai2a-0 {
+		pins {
+			pinmux = <STM32_PINMUX('I', 5, AF10)>, /* SAI2_SCK_A */
+				 <STM32_PINMUX('I', 6, AF10)>, /* SAI2_SD_A */
+				 <STM32_PINMUX('I', 7, AF10)>, /* SAI2_FS_A */
+				 <STM32_PINMUX('E', 0, AF10)>; /* SAI2_MCLK_A */
+			slew-rate = <0>;
+			drive-push-pull;
+			bias-disable;
+		};
+	};
+
+	sai2a_sleep_pins_a: sai2a-1 {
+		pins {
+			pinmux = <STM32_PINMUX('I', 5, ANALOG)>, /* SAI2_SCK_A */
+				 <STM32_PINMUX('I', 6, ANALOG)>, /* SAI2_SD_A */
+				 <STM32_PINMUX('I', 7, ANALOG)>, /* SAI2_FS_A */
+				 <STM32_PINMUX('E', 0, ANALOG)>; /* SAI2_MCLK_A */
+		};
+	};
+
+	sai2b_pins_a: sai2b-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('E', 12, AF10)>, /* SAI2_SCK_B */
+				 <STM32_PINMUX('E', 13, AF10)>, /* SAI2_FS_B */
+				 <STM32_PINMUX('E', 14, AF10)>; /* SAI2_MCLK_B */
+			slew-rate = <0>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */
+			bias-disable;
+		};
+	};
+
+	sai2b_sleep_pins_a: sai2b-1 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 11, ANALOG)>, /* SAI2_SD_B */
+				 <STM32_PINMUX('E', 12, ANALOG)>, /* SAI2_SCK_B */
+				 <STM32_PINMUX('E', 13, ANALOG)>, /* SAI2_FS_B */
+				 <STM32_PINMUX('E', 14, ANALOG)>; /* SAI2_MCLK_B */
+		};
+	};
+
+	sai2b_pins_b: sai2b-2 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */
+			bias-disable;
+		};
+	};
+
+	sai2b_sleep_pins_b: sai2b-3 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 11, ANALOG)>; /* SAI2_SD_B */
+		};
+	};
+
+	sai4a_pins_a: sai4a-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 5, AF10)>; /* SAI4_SD_A */
+			slew-rate = <0>;
+			drive-push-pull;
+			bias-disable;
+		};
+	};
+
+	sai4a_sleep_pins_a: sai4a-1 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 5, ANALOG)>; /* SAI4_SD_A */
+		};
+	};
+
+	sdmmc1_b4_pins_a: sdmmc1-b4-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
+				 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
+				 <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
+				 <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
+				 <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-disable;
+		};
+	};
+
+	sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
+				 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
+				 <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
+				 <STM32_PINMUX('C', 11, AF12)>; /* SDMMC1_D3 */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
+			slew-rate = <1>;
+			drive-open-drain;
+			bias-disable;
+		};
+	};
+
+	sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */
+				 <STM32_PINMUX('C', 9, ANALOG)>, /* SDMMC1_D1 */
+				 <STM32_PINMUX('C', 10, ANALOG)>, /* SDMMC1_D2 */
+				 <STM32_PINMUX('C', 11, ANALOG)>, /* SDMMC1_D3 */
+				 <STM32_PINMUX('C', 12, ANALOG)>, /* SDMMC1_CK */
+				 <STM32_PINMUX('D', 2, ANALOG)>; /* SDMMC1_CMD */
+		};
+	};
+
+	sdmmc1_dir_pins_a: sdmmc1-dir-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 2, AF11)>, /* SDMMC1_D0DIR */
+				 <STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */
+				 <STM32_PINMUX('B', 9, AF11)>; /* SDMMC1_CDIR */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+		pins2{
+			pinmux = <STM32_PINMUX('E', 4, AF8)>; /* SDMMC1_CKIN */
+			bias-pull-up;
+		};
+	};
+
+	sdmmc1_dir_sleep_pins_a: sdmmc1-dir-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 2, ANALOG)>, /* SDMMC1_D0DIR */
+				 <STM32_PINMUX('C', 7, ANALOG)>, /* SDMMC1_D123DIR */
+				 <STM32_PINMUX('B', 9, ANALOG)>, /* SDMMC1_CDIR */
+				 <STM32_PINMUX('E', 4, ANALOG)>; /* SDMMC1_CKIN */
+		};
+	};
+
+	sdmmc2_b4_pins_a: sdmmc2-b4-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+				 <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */
+				 <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
+				 <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */
+				 <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+	};
+
+	sdmmc2_b4_od_pins_a: sdmmc2-b4-od-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+				 <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */
+				 <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
+				 <STM32_PINMUX('B', 4, AF9)>; /* SDMMC2_D3 */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
+			slew-rate = <1>;
+			drive-open-drain;
+			bias-pull-up;
+		};
+	};
+
+	sdmmc2_b4_sleep_pins_a: sdmmc2-b4-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 14, ANALOG)>, /* SDMMC2_D0 */
+				 <STM32_PINMUX('B', 15, ANALOG)>, /* SDMMC2_D1 */
+				 <STM32_PINMUX('B', 3, ANALOG)>, /* SDMMC2_D2 */
+				 <STM32_PINMUX('B', 4, ANALOG)>, /* SDMMC2_D3 */
+				 <STM32_PINMUX('E', 3, ANALOG)>, /* SDMMC2_CK */
+				 <STM32_PINMUX('G', 6, ANALOG)>; /* SDMMC2_CMD */
+		};
+	};
+
+	sdmmc2_b4_pins_b: sdmmc2-b4-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+				 <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */
+				 <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
+				 <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */
+				 <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-disable;
+		};
+	};
+
+	sdmmc2_b4_od_pins_b: sdmmc2-b4-od-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+				 <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */
+				 <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
+				 <STM32_PINMUX('B', 4, AF9)>; /* SDMMC2_D3 */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
+			slew-rate = <1>;
+			drive-open-drain;
+			bias-disable;
+		};
+	};
+
+	sdmmc2_d47_pins_a: sdmmc2-d47-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
+				 <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
+				 <STM32_PINMUX('E', 5, AF9)>, /* SDMMC2_D6 */
+				 <STM32_PINMUX('D', 3, AF9)>; /* SDMMC2_D7 */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+	};
+
+	sdmmc2_d47_sleep_pins_a: sdmmc2-d47-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */
+				 <STM32_PINMUX('A', 9, ANALOG)>, /* SDMMC2_D5 */
+				 <STM32_PINMUX('E', 5, ANALOG)>, /* SDMMC2_D6 */
+				 <STM32_PINMUX('D', 3, ANALOG)>; /* SDMMC2_D7 */
+		};
+	};
+
+	sdmmc3_b4_pins_a: sdmmc3-b4-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 0, AF9)>, /* SDMMC3_D0 */
+				 <STM32_PINMUX('F', 4, AF9)>, /* SDMMC3_D1 */
+				 <STM32_PINMUX('F', 5, AF9)>, /* SDMMC3_D2 */
+				 <STM32_PINMUX('D', 7, AF10)>, /* SDMMC3_D3 */
+				 <STM32_PINMUX('F', 1, AF9)>; /* SDMMC3_CMD */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('G', 15, AF10)>; /* SDMMC3_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+	};
+
+	sdmmc3_b4_od_pins_a: sdmmc3-b4-od-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 0, AF9)>, /* SDMMC3_D0 */
+				 <STM32_PINMUX('F', 4, AF9)>, /* SDMMC3_D1 */
+				 <STM32_PINMUX('F', 5, AF9)>, /* SDMMC3_D2 */
+				 <STM32_PINMUX('D', 7, AF10)>; /* SDMMC3_D3 */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('G', 15, AF10)>; /* SDMMC3_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('F', 1, AF9)>; /* SDMMC2_CMD */
+			slew-rate = <1>;
+			drive-open-drain;
+			bias-pull-up;
+		};
+	};
+
+	sdmmc3_b4_sleep_pins_a: sdmmc3-b4-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 0, ANALOG)>, /* SDMMC3_D0 */
+				 <STM32_PINMUX('F', 4, ANALOG)>, /* SDMMC3_D1 */
+				 <STM32_PINMUX('F', 5, ANALOG)>, /* SDMMC3_D2 */
+				 <STM32_PINMUX('D', 7, ANALOG)>, /* SDMMC3_D3 */
+				 <STM32_PINMUX('G', 15, ANALOG)>, /* SDMMC3_CK */
+				 <STM32_PINMUX('F', 1, ANALOG)>; /* SDMMC3_CMD */
+		};
+	};
+
+	spdifrx_pins_a: spdifrx-0 {
+		pins {
+			pinmux = <STM32_PINMUX('G', 12, AF8)>; /* SPDIF_IN1 */
+			bias-disable;
+		};
+	};
+
+	spdifrx_sleep_pins_a: spdifrx-1 {
+		pins {
+			pinmux = <STM32_PINMUX('G', 12, ANALOG)>; /* SPDIF_IN1 */
+		};
+	};
+
+	uart4_pins_a: uart4-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+			bias-disable;
+		};
+	};
+
+	uart4_pins_b: uart4-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('D', 1, AF8)>; /* UART4_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+			bias-disable;
+		};
+	};
+
+	uart7_pins_a: uart7-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('E', 8, AF7)>; /* UART4_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 7, AF7)>, /* UART4_RX */
+				 <STM32_PINMUX('E', 10, AF7)>, /* UART4_CTS */
+				 <STM32_PINMUX('E', 9, AF7)>; /* UART4_RTS */
+			bias-disable;
+		};
+	};
+};
+
+&pinctrl_z {
+	i2c2_pins_b2: i2c2-0 {
+		pins {
+			pinmux = <STM32_PINMUX('Z', 0, AF3)>; /* I2C2_SCL */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	i2c2_pins_sleep_b2: i2c2-1 {
+		pins {
+			pinmux = <STM32_PINMUX('Z', 0, ANALOG)>; /* I2C2_SCL */
+		};
+	};
+
+	i2c4_pins_a: i2c4-0 {
+		pins {
+			pinmux = <STM32_PINMUX('Z', 4, AF6)>, /* I2C4_SCL */
+				 <STM32_PINMUX('Z', 5, AF6)>; /* I2C4_SDA */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	i2c4_pins_sleep_a: i2c4-1 {
+		pins {
+			pinmux = <STM32_PINMUX('Z', 4, ANALOG)>, /* I2C4_SCL */
+				 <STM32_PINMUX('Z', 5, ANALOG)>; /* I2C4_SDA */
+		};
+	};
+
+	spi1_pins_a: spi1-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('Z', 0, AF5)>, /* SPI1_SCK */
+				 <STM32_PINMUX('Z', 2, AF5)>; /* SPI1_MOSI */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+
+		pins2 {
+			pinmux = <STM32_PINMUX('Z', 1, AF5)>; /* SPI1_MISO */
+			bias-disable;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi
index ed8b258256d7..fb41d0778b00 100644
--- a/arch/arm/boot/dts/stm32mp157c.dtsi
+++ b/arch/arm/boot/dts/stm32mp151.dtsi
@@ -20,12 +20,6 @@
 			device_type = "cpu";
 			reg = <0>;
 		};
-
-		cpu1: cpu@1 {
-			compatible = "arm,cortex-a7";
-			device_type = "cpu";
-			reg = <1>;
-		};
 	};
 
 	psci {
@@ -148,6 +142,11 @@
 				reg = <1>;
 				status = "disabled";
 			};
+
+			counter {
+				compatible = "st,stm32-timer-counter";
+				status = "disabled";
+			};
 		};
 
 		timers3: timer@40001000 {
@@ -177,6 +176,11 @@
 				reg = <2>;
 				status = "disabled";
 			};
+
+			counter {
+				compatible = "st,stm32-timer-counter";
+				status = "disabled";
+			};
 		};
 
 		timers4: timer@40002000 {
@@ -204,6 +208,11 @@
 				reg = <3>;
 				status = "disabled";
 			};
+
+			counter {
+				compatible = "st,stm32-timer-counter";
+				status = "disabled";
+			};
 		};
 
 		timers5: timer@40003000 {
@@ -233,6 +242,11 @@
 				reg = <4>;
 				status = "disabled";
 			};
+
+			counter {
+				compatible = "st,stm32-timer-counter";
+				status = "disabled";
+			};
 		};
 
 		timers6: timer@40004000 {
@@ -589,6 +603,11 @@
 				reg = <0>;
 				status = "disabled";
 			};
+
+			counter {
+				compatible = "st,stm32-timer-counter";
+				status = "disabled";
+			};
 		};
 
 		timers8: timer@44001000 {
@@ -620,6 +639,11 @@
 				reg = <7>;
 				status = "disabled";
 			};
+
+			counter {
+				compatible = "st,stm32-timer-counter";
+				status = "disabled";
+			};
 		};
 
 		usart6: serial@44003000 {
@@ -923,33 +947,7 @@
 			};
 		};
 
-		m_can1: can@4400e000 {
-			compatible = "bosch,m_can";
-			reg = <0x4400e000 0x400>, <0x44011000 0x1400>;
-			reg-names = "m_can", "message_ram";
-			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "int0", "int1";
-			clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>;
-			clock-names = "hclk", "cclk";
-			bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>;
-			status = "disabled";
-		};
-
-		m_can2: can@4400f000 {
-			compatible = "bosch,m_can";
-			reg = <0x4400f000 0x400>, <0x44011000 0x2800>;
-			reg-names = "m_can", "message_ram";
-			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "int0", "int1";
-			clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>;
-			clock-names = "hclk", "cclk";
-			bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>;
-			status = "disabled";
-		};
-
-		dma1: dma@48000000 {
+		dma1: dma-controller@48000000 {
 			compatible = "st,stm32-dma";
 			reg = <0x48000000 0x400>;
 			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
@@ -966,7 +964,7 @@
 			dma-requests = <8>;
 		};
 
-		dma2: dma@48001000 {
+		dma2: dma-controller@48001000 {
 			compatible = "st,stm32-dma";
 			reg = <0x48001000 0x400>;
 			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
@@ -1030,6 +1028,21 @@
 			};
 		};
 
+		sdmmc3: sdmmc@48004000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			arm,primecell-periphid = <0x10153180>;
+			reg = <0x48004000 0x400>;
+			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "cmd_irq";
+			clocks = <&rcc SDMMC3_K>;
+			clock-names = "apb_pclk";
+			resets = <&rcc SDMMC3_R>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			max-frequency = <120000000>;
+			status = "disabled";
+		};
+
 		usbotg_hs: usb-otg@49000000 {
 			compatible = "snps,dwc2";
 			reg = <0x49000000 0x10000>;
@@ -1242,15 +1255,6 @@
 			status = "disabled";
 		};
 
-		cryp1: cryp@54001000 {
-			compatible = "st,stm32mp1-cryp";
-			reg = <0x54001000 0x400>;
-			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc CRYP1>;
-			resets = <&rcc CRYP1_R>;
-			status = "disabled";
-		};
-
 		hash1: hash@54002000 {
 			compatible = "st,stm32f756-hash";
 			reg = <0x54002000 0x400>;
@@ -1271,7 +1275,7 @@
 			status = "disabled";
 		};
 
-		mdma1: dma@58000000 {
+		mdma1: dma-controller@58000000 {
 			compatible = "st,stm32h7-mdma";
 			reg = <0x58000000 0x1000>;
 			interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
@@ -1318,13 +1322,29 @@
 			arm,primecell-periphid = <0x10153180>;
 			reg = <0x58005000 0x1000>;
 			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names	= "cmd_irq";
+			interrupt-names = "cmd_irq";
 			clocks = <&rcc SDMMC1_K>;
 			clock-names = "apb_pclk";
 			resets = <&rcc SDMMC1_R>;
 			cap-sd-highspeed;
 			cap-mmc-highspeed;
 			max-frequency = <120000000>;
+			status = "disabled";
+		};
+
+		sdmmc2: sdmmc@58007000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			arm,primecell-periphid = <0x10153180>;
+			reg = <0x58007000 0x1000>;
+			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "cmd_irq";
+			clocks = <&rcc SDMMC2_K>;
+			clock-names = "apb_pclk";
+			resets = <&rcc SDMMC2_R>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			max-frequency = <120000000>;
+			status = "disabled";
 		};
 
 		crc1: crc@58009000 {
@@ -1349,16 +1369,15 @@
 			clock-names = "stmmaceth",
 				      "mac-clk-tx",
 				      "mac-clk-rx",
-				      "ethstp",
-				      "syscfg-clk";
+				      "ethstp";
 			clocks = <&rcc ETHMAC>,
 				 <&rcc ETHTX>,
 				 <&rcc ETHRX>,
-				 <&rcc ETHSTP>,
-				 <&rcc SYSCFG>;
+				 <&rcc ETHSTP>;
 			st,syscon = <&syscfg 0x4>;
 			snps,mixed-burst;
 			snps,pbl = <2>;
+			snps,en-tx-lpi-clockgating;
 			snps,axi-config = <&stmmac_axi_config_0>;
 			snps,tso;
 			status = "disabled";
@@ -1383,26 +1402,6 @@
 			status = "disabled";
 		};
 
-		gpu: gpu@59000000 {
-			compatible = "vivante,gc";
-			reg = <0x59000000 0x800>;
-			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc GPU>, <&rcc GPU_K>;
-			clock-names = "bus" ,"core";
-			resets = <&rcc GPU_R>;
-			status = "disabled";
-		};
-
-		dsi: dsi@5a000000 {
-			compatible = "st,stm32-dsi";
-			reg = <0x5a000000 0x800>;
-			clocks = <&rcc DSI_K>, <&clk_hse>, <&rcc DSI_PX>;
-			clock-names = "pclk", "ref", "px_clk";
-			resets = <&rcc DSI_R>;
-			reset-names = "apb";
-			status = "disabled";
-		};
-
 		ltdc: display-controller@5a001000 {
 			compatible = "st,stm32-ltdc";
 			reg = <0x5a001000 0x400>;
@@ -1486,7 +1485,7 @@
 			status = "disabled";
 		};
 
-		bsec: nvmem@5c005000 {
+		bsec: efuse@5c005000 {
 			compatible = "st,stm32mp15-bsec";
 			reg = <0x5c005000 0x400>;
 			#address-cells = <1>;
@@ -1511,12 +1510,170 @@
 			#size-cells = <0>;
 			status = "disabled";
 		};
+
+		/*
+		 * Break node order to solve dependency probe issue between
+		 * pinctrl and exti.
+		 */
+		pinctrl: pin-controller@50002000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "st,stm32mp157-pinctrl";
+			ranges = <0 0x50002000 0xa400>;
+			interrupt-parent = <&exti>;
+			st,syscfg = <&exti 0x60 0xff>;
+			pins-are-numbered;
+
+			gpioa: gpio@50002000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x0 0x400>;
+				clocks = <&rcc GPIOA>;
+				st,bank-name = "GPIOA";
+				status = "disabled";
+			};
+
+			gpiob: gpio@50003000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1000 0x400>;
+				clocks = <&rcc GPIOB>;
+				st,bank-name = "GPIOB";
+				status = "disabled";
+			};
+
+			gpioc: gpio@50004000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2000 0x400>;
+				clocks = <&rcc GPIOC>;
+				st,bank-name = "GPIOC";
+				status = "disabled";
+			};
+
+			gpiod: gpio@50005000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x3000 0x400>;
+				clocks = <&rcc GPIOD>;
+				st,bank-name = "GPIOD";
+				status = "disabled";
+			};
+
+			gpioe: gpio@50006000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x4000 0x400>;
+				clocks = <&rcc GPIOE>;
+				st,bank-name = "GPIOE";
+				status = "disabled";
+			};
+
+			gpiof: gpio@50007000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x5000 0x400>;
+				clocks = <&rcc GPIOF>;
+				st,bank-name = "GPIOF";
+				status = "disabled";
+			};
+
+			gpiog: gpio@50008000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x6000 0x400>;
+				clocks = <&rcc GPIOG>;
+				st,bank-name = "GPIOG";
+				status = "disabled";
+			};
+
+			gpioh: gpio@50009000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x7000 0x400>;
+				clocks = <&rcc GPIOH>;
+				st,bank-name = "GPIOH";
+				status = "disabled";
+			};
+
+			gpioi: gpio@5000a000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x8000 0x400>;
+				clocks = <&rcc GPIOI>;
+				st,bank-name = "GPIOI";
+				status = "disabled";
+			};
+
+			gpioj: gpio@5000b000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x9000 0x400>;
+				clocks = <&rcc GPIOJ>;
+				st,bank-name = "GPIOJ";
+				status = "disabled";
+			};
+
+			gpiok: gpio@5000c000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0xa000 0x400>;
+				clocks = <&rcc GPIOK>;
+				st,bank-name = "GPIOK";
+				status = "disabled";
+			};
+		};
+
+		pinctrl_z: pin-controller-z@54004000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "st,stm32mp157-z-pinctrl";
+			ranges = <0 0x54004000 0x400>;
+			pins-are-numbered;
+			interrupt-parent = <&exti>;
+			st,syscfg = <&exti 0x60 0xff>;
+
+			gpioz: gpio@54004000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0 0x400>;
+				clocks = <&rcc GPIOZ>;
+				st,bank-name = "GPIOZ";
+				st,bank-ioport = <11>;
+				status = "disabled";
+			};
+		};
 	};
 
-	mlahb {
-		compatible = "simple-bus";
+	mlahb: ahb {
+		compatible = "st,mlahb", "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
+		ranges;
 		dma-ranges = <0x00000000 0x38000000 0x10000>,
 			     <0x10000000 0x10000000 0x60000>,
 			     <0x30000000 0x30000000 0x60000>;
diff --git a/arch/arm/boot/dts/stm32mp153.dtsi b/arch/arm/boot/dts/stm32mp153.dtsi
new file mode 100644
index 000000000000..2d759fc6015c
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp153.dtsi
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+#include "stm32mp151.dtsi"
+
+/ {
+	cpus {
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <1>;
+		};
+	};
+
+	soc {
+		m_can1: can@4400e000 {
+			compatible = "bosch,m_can";
+			reg = <0x4400e000 0x400>, <0x44011000 0x1400>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>;
+			clock-names = "hclk", "cclk";
+			bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>;
+			status = "disabled";
+		};
+
+		m_can2: can@4400f000 {
+			compatible = "bosch,m_can";
+			reg = <0x4400f000 0x400>, <0x44011000 0x2800>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>;
+			clock-names = "hclk", "cclk";
+			bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
deleted file mode 100644
index 3d1ecb408b03..000000000000
--- a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
+++ /dev/null
@@ -1,953 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
- * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
- */
-#include <dt-bindings/pinctrl/stm32-pinfunc.h>
-
-/ {
-	soc {
-		pinctrl: pin-controller@50002000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "st,stm32mp157-pinctrl";
-			ranges = <0 0x50002000 0xa400>;
-			interrupt-parent = <&exti>;
-			st,syscfg = <&exti 0x60 0xff>;
-			pins-are-numbered;
-
-			gpioa: gpio@50002000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x0 0x400>;
-				clocks = <&rcc GPIOA>;
-				st,bank-name = "GPIOA";
-				status = "disabled";
-			};
-
-			gpiob: gpio@50003000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x1000 0x400>;
-				clocks = <&rcc GPIOB>;
-				st,bank-name = "GPIOB";
-				status = "disabled";
-			};
-
-			gpioc: gpio@50004000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x2000 0x400>;
-				clocks = <&rcc GPIOC>;
-				st,bank-name = "GPIOC";
-				status = "disabled";
-			};
-
-			gpiod: gpio@50005000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x3000 0x400>;
-				clocks = <&rcc GPIOD>;
-				st,bank-name = "GPIOD";
-				status = "disabled";
-			};
-
-			gpioe: gpio@50006000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x4000 0x400>;
-				clocks = <&rcc GPIOE>;
-				st,bank-name = "GPIOE";
-				status = "disabled";
-			};
-
-			gpiof: gpio@50007000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x5000 0x400>;
-				clocks = <&rcc GPIOF>;
-				st,bank-name = "GPIOF";
-				status = "disabled";
-			};
-
-			gpiog: gpio@50008000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x6000 0x400>;
-				clocks = <&rcc GPIOG>;
-				st,bank-name = "GPIOG";
-				status = "disabled";
-			};
-
-			gpioh: gpio@50009000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x7000 0x400>;
-				clocks = <&rcc GPIOH>;
-				st,bank-name = "GPIOH";
-				status = "disabled";
-			};
-
-			gpioi: gpio@5000a000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x8000 0x400>;
-				clocks = <&rcc GPIOI>;
-				st,bank-name = "GPIOI";
-				status = "disabled";
-			};
-
-			gpioj: gpio@5000b000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x9000 0x400>;
-				clocks = <&rcc GPIOJ>;
-				st,bank-name = "GPIOJ";
-				status = "disabled";
-			};
-
-			gpiok: gpio@5000c000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0xa000 0x400>;
-				clocks = <&rcc GPIOK>;
-				st,bank-name = "GPIOK";
-				status = "disabled";
-			};
-
-			adc12_ain_pins_a: adc12-ain-0 {
-				pins {
-					pinmux = <STM32_PINMUX('C', 3, ANALOG)>, /* ADC1 in13 */
-						 <STM32_PINMUX('F', 12, ANALOG)>, /* ADC1 in6 */
-						 <STM32_PINMUX('F', 13, ANALOG)>, /* ADC2 in2 */
-						 <STM32_PINMUX('F', 14, ANALOG)>; /* ADC2 in6 */
-				};
-			};
-
-			adc12_usb_cc_pins_a: adc12-usb-cc-pins-0 {
-				pins {
-					pinmux = <STM32_PINMUX('A', 4, ANALOG)>, /* ADC12 in18 */
-						 <STM32_PINMUX('A', 5, ANALOG)>; /* ADC12 in19 */
-				};
-			};
-
-			cec_pins_a: cec-0 {
-				pins {
-					pinmux = <STM32_PINMUX('A', 15, AF4)>;
-					bias-disable;
-					drive-open-drain;
-					slew-rate = <0>;
-				};
-			};
-
-			cec_pins_sleep_a: cec-sleep-0 {
-				pins {
-					pinmux = <STM32_PINMUX('A', 15, ANALOG)>; /* HDMI_CEC */
-				};
-			};
-
-			cec_pins_b: cec-1 {
-				pins {
-					pinmux = <STM32_PINMUX('B', 6, AF5)>;
-					bias-disable;
-					drive-open-drain;
-					slew-rate = <0>;
-				};
-			};
-
-			cec_pins_sleep_b: cec-sleep-1 {
-				pins {
-					pinmux = <STM32_PINMUX('B', 6, ANALOG)>; /* HDMI_CEC */
-				};
-			};
-
-			dac_ch1_pins_a: dac-ch1 {
-				pins {
-					pinmux = <STM32_PINMUX('A', 4, ANALOG)>;
-				};
-			};
-
-			dac_ch2_pins_a: dac-ch2 {
-				pins {
-					pinmux = <STM32_PINMUX('A', 5, ANALOG)>;
-				};
-			};
-
-			dcmi_pins_a: dcmi-0 {
-				pins {
-					pinmux = <STM32_PINMUX('H', 8,  AF13)>,/* DCMI_HSYNC */
-						 <STM32_PINMUX('B', 7,  AF13)>,/* DCMI_VSYNC */
-						 <STM32_PINMUX('A', 6,  AF13)>,/* DCMI_PIXCLK */
-						 <STM32_PINMUX('H', 9,  AF13)>,/* DCMI_D0 */
-						 <STM32_PINMUX('H', 10, AF13)>,/* DCMI_D1 */
-						 <STM32_PINMUX('H', 11, AF13)>,/* DCMI_D2 */
-						 <STM32_PINMUX('H', 12, AF13)>,/* DCMI_D3 */
-						 <STM32_PINMUX('H', 14, AF13)>,/* DCMI_D4 */
-						 <STM32_PINMUX('I', 4,  AF13)>,/* DCMI_D5 */
-						 <STM32_PINMUX('B', 8,  AF13)>,/* DCMI_D6 */
-						 <STM32_PINMUX('E', 6,  AF13)>,/* DCMI_D7 */
-						 <STM32_PINMUX('I', 1,  AF13)>,/* DCMI_D8 */
-						 <STM32_PINMUX('H', 7,  AF13)>,/* DCMI_D9 */
-						 <STM32_PINMUX('I', 3,  AF13)>,/* DCMI_D10 */
-						 <STM32_PINMUX('H', 15, AF13)>;/* DCMI_D11 */
-					bias-disable;
-				};
-			};
-
-			dcmi_sleep_pins_a: dcmi-sleep-0 {
-				pins {
-					pinmux = <STM32_PINMUX('H', 8,  ANALOG)>,/* DCMI_HSYNC */
-						 <STM32_PINMUX('B', 7,  ANALOG)>,/* DCMI_VSYNC */
-						 <STM32_PINMUX('A', 6,  ANALOG)>,/* DCMI_PIXCLK */
-						 <STM32_PINMUX('H', 9,  ANALOG)>,/* DCMI_D0 */
-						 <STM32_PINMUX('H', 10, ANALOG)>,/* DCMI_D1 */
-						 <STM32_PINMUX('H', 11, ANALOG)>,/* DCMI_D2 */
-						 <STM32_PINMUX('H', 12, ANALOG)>,/* DCMI_D3 */
-						 <STM32_PINMUX('H', 14, ANALOG)>,/* DCMI_D4 */
-						 <STM32_PINMUX('I', 4,  ANALOG)>,/* DCMI_D5 */
-						 <STM32_PINMUX('B', 8,  ANALOG)>,/* DCMI_D6 */
-						 <STM32_PINMUX('E', 6,  ANALOG)>,/* DCMI_D7 */
-						 <STM32_PINMUX('I', 1,  ANALOG)>,/* DCMI_D8 */
-						 <STM32_PINMUX('H', 7,  ANALOG)>,/* DCMI_D9 */
-						 <STM32_PINMUX('I', 3,  ANALOG)>,/* DCMI_D10 */
-						 <STM32_PINMUX('H', 15, ANALOG)>;/* DCMI_D11 */
-				};
-			};
-
-			ethernet0_rgmii_pins_a: rgmii-0 {
-				pins1 {
-					pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */
-						 <STM32_PINMUX('G', 4, AF11)>, /* ETH_RGMII_GTX_CLK */
-						 <STM32_PINMUX('G', 13, AF11)>, /* ETH_RGMII_TXD0 */
-						 <STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */
-						 <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */
-						 <STM32_PINMUX('E', 2, AF11)>, /* ETH_RGMII_TXD3 */
-						 <STM32_PINMUX('B', 11, AF11)>, /* ETH_RGMII_TX_CTL */
-						 <STM32_PINMUX('A', 2, AF11)>, /* ETH_MDIO */
-						 <STM32_PINMUX('C', 1, AF11)>; /* ETH_MDC */
-					bias-disable;
-					drive-push-pull;
-					slew-rate = <3>;
-				};
-				pins2 {
-					pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */
-						 <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */
-						 <STM32_PINMUX('B', 0, AF11)>, /* ETH_RGMII_RXD2 */
-						 <STM32_PINMUX('B', 1, AF11)>, /* ETH_RGMII_RXD3 */
-						 <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */
-						 <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */
-					bias-disable;
-				};
-			};
-
-			ethernet0_rgmii_pins_sleep_a: rgmii-sleep-0 {
-				pins1 {
-					pinmux = <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_RGMII_CLK125 */
-						 <STM32_PINMUX('G', 4, ANALOG)>, /* ETH_RGMII_GTX_CLK */
-						 <STM32_PINMUX('G', 13, ANALOG)>, /* ETH_RGMII_TXD0 */
-						 <STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RGMII_TXD1 */
-						 <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_TXD2 */
-						 <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_TXD3 */
-						 <STM32_PINMUX('B', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */
-						 <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */
-						 <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_MDC */
-						 <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */
-						 <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */
-						 <STM32_PINMUX('B', 0, ANALOG)>, /* ETH_RGMII_RXD2 */
-						 <STM32_PINMUX('B', 1, ANALOG)>, /* ETH_RGMII_RXD3 */
-						 <STM32_PINMUX('A', 1, ANALOG)>, /* ETH_RGMII_RX_CLK */
-						 <STM32_PINMUX('A', 7, ANALOG)>; /* ETH_RGMII_RX_CTL */
-				};
-			};
-
-			fmc_pins_a: fmc-0 {
-				pins1 {
-					pinmux = <STM32_PINMUX('D', 4, AF12)>, /* FMC_NOE */
-						 <STM32_PINMUX('D', 5, AF12)>, /* FMC_NWE */
-						 <STM32_PINMUX('D', 11, AF12)>, /* FMC_A16_FMC_CLE */
-						 <STM32_PINMUX('D', 12, AF12)>, /* FMC_A17_FMC_ALE */
-						 <STM32_PINMUX('D', 14, AF12)>, /* FMC_D0 */
-						 <STM32_PINMUX('D', 15, AF12)>, /* FMC_D1 */
-						 <STM32_PINMUX('D', 0, AF12)>, /* FMC_D2 */
-						 <STM32_PINMUX('D', 1, AF12)>, /* FMC_D3 */
-						 <STM32_PINMUX('E', 7, AF12)>, /* FMC_D4 */
-						 <STM32_PINMUX('E', 8, AF12)>, /* FMC_D5 */
-						 <STM32_PINMUX('E', 9, AF12)>, /* FMC_D6 */
-						 <STM32_PINMUX('E', 10, AF12)>, /* FMC_D7 */
-						 <STM32_PINMUX('G', 9, AF12)>; /* FMC_NE2_FMC_NCE */
-					bias-disable;
-					drive-push-pull;
-					slew-rate = <1>;
-				};
-				pins2 {
-					pinmux = <STM32_PINMUX('D', 6, AF12)>; /* FMC_NWAIT */
-					bias-pull-up;
-				};
-			};
-
-			fmc_sleep_pins_a: fmc-sleep-0 {
-				pins {
-					pinmux = <STM32_PINMUX('D', 4, ANALOG)>, /* FMC_NOE */
-						 <STM32_PINMUX('D', 5, ANALOG)>, /* FMC_NWE */
-						 <STM32_PINMUX('D', 11, ANALOG)>, /* FMC_A16_FMC_CLE */
-						 <STM32_PINMUX('D', 12, ANALOG)>, /* FMC_A17_FMC_ALE */
-						 <STM32_PINMUX('D', 14, ANALOG)>, /* FMC_D0 */
-						 <STM32_PINMUX('D', 15, ANALOG)>, /* FMC_D1 */
-						 <STM32_PINMUX('D', 0, ANALOG)>, /* FMC_D2 */
-						 <STM32_PINMUX('D', 1, ANALOG)>, /* FMC_D3 */
-						 <STM32_PINMUX('E', 7, ANALOG)>, /* FMC_D4 */
-						 <STM32_PINMUX('E', 8, ANALOG)>, /* FMC_D5 */
-						 <STM32_PINMUX('E', 9, ANALOG)>, /* FMC_D6 */
-						 <STM32_PINMUX('E', 10, ANALOG)>, /* FMC_D7 */
-						 <STM32_PINMUX('D', 6, ANALOG)>, /* FMC_NWAIT */
-						 <STM32_PINMUX('G', 9, ANALOG)>; /* FMC_NE2_FMC_NCE */
-				};
-			};
-
-			i2c1_pins_a: i2c1-0 {
-				pins {
-					pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */
-						 <STM32_PINMUX('F', 15, AF5)>; /* I2C1_SDA */
-					bias-disable;
-					drive-open-drain;
-					slew-rate = <0>;
-				};
-			};
-
-			i2c1_pins_sleep_a: i2c1-1 {
-				pins {
-					pinmux = <STM32_PINMUX('D', 12, ANALOG)>, /* I2C1_SCL */
-						 <STM32_PINMUX('F', 15, ANALOG)>; /* I2C1_SDA */
-				};
-			};
-
-			i2c1_pins_b: i2c1-2 {
-				pins {
-					pinmux = <STM32_PINMUX('F', 14, AF5)>, /* I2C1_SCL */
-						 <STM32_PINMUX('F', 15, AF5)>; /* I2C1_SDA */
-					bias-disable;
-					drive-open-drain;
-					slew-rate = <0>;
-				};
-			};
-
-			i2c1_pins_sleep_b: i2c1-3 {
-				pins {
-					pinmux = <STM32_PINMUX('F', 14, ANALOG)>, /* I2C1_SCL */
-						 <STM32_PINMUX('F', 15, ANALOG)>; /* I2C1_SDA */
-				};
-			};
-
-			i2c2_pins_a: i2c2-0 {
-				pins {
-					pinmux = <STM32_PINMUX('H', 4, AF4)>, /* I2C2_SCL */
-						 <STM32_PINMUX('H', 5, AF4)>; /* I2C2_SDA */
-					bias-disable;
-					drive-open-drain;
-					slew-rate = <0>;
-				};
-			};
-
-			i2c2_pins_sleep_a: i2c2-1 {
-				pins {
-					pinmux = <STM32_PINMUX('H', 4, ANALOG)>, /* I2C2_SCL */
-						 <STM32_PINMUX('H', 5, ANALOG)>; /* I2C2_SDA */
-				};
-			};
-
-			i2c2_pins_b1: i2c2-2 {
-				pins {
-					pinmux = <STM32_PINMUX('H', 5, AF4)>; /* I2C2_SDA */
-					bias-disable;
-					drive-open-drain;
-					slew-rate = <0>;
-				};
-			};
-
-			i2c2_pins_sleep_b1: i2c2-3 {
-				pins {
-					pinmux = <STM32_PINMUX('H', 5, ANALOG)>; /* I2C2_SDA */
-				};
-			};
-
-			i2c5_pins_a: i2c5-0 {
-				pins {
-					pinmux = <STM32_PINMUX('A', 11, AF4)>, /* I2C5_SCL */
-						 <STM32_PINMUX('A', 12, AF4)>; /* I2C5_SDA */
-					bias-disable;
-					drive-open-drain;
-					slew-rate = <0>;
-				};
-			};
-
-			i2c5_pins_sleep_a: i2c5-1 {
-				pins {
-					pinmux = <STM32_PINMUX('A', 11, ANALOG)>, /* I2C5_SCL */
-						 <STM32_PINMUX('A', 12, ANALOG)>; /* I2C5_SDA */
-
-				};
-			};
-
-			i2s2_pins_a: i2s2-0 {
-				pins {
-					pinmux = <STM32_PINMUX('I', 3, AF5)>, /* I2S2_SDO */
-						 <STM32_PINMUX('B', 9, AF5)>, /* I2S2_WS */
-						 <STM32_PINMUX('A', 9, AF5)>; /* I2S2_CK */
-					slew-rate = <1>;
-					drive-push-pull;
-					bias-disable;
-				};
-			};
-
-			i2s2_pins_sleep_a: i2s2-1 {
-				pins {
-					pinmux = <STM32_PINMUX('I', 3, ANALOG)>, /* I2S2_SDO */
-						 <STM32_PINMUX('B', 9, ANALOG)>, /* I2S2_WS */
-						 <STM32_PINMUX('A', 9, ANALOG)>; /* I2S2_CK */
-				};
-			};
-
-			ltdc_pins_a: ltdc-a-0 {
-				pins {
-					pinmux = <STM32_PINMUX('G',  7, AF14)>, /* LCD_CLK */
-						 <STM32_PINMUX('I', 10, AF14)>, /* LCD_HSYNC */
-						 <STM32_PINMUX('I',  9, AF14)>, /* LCD_VSYNC */
-						 <STM32_PINMUX('F', 10, AF14)>, /* LCD_DE */
-						 <STM32_PINMUX('H',  2, AF14)>, /* LCD_R0 */
-						 <STM32_PINMUX('H',  3, AF14)>, /* LCD_R1 */
-						 <STM32_PINMUX('H',  8, AF14)>, /* LCD_R2 */
-						 <STM32_PINMUX('H',  9, AF14)>, /* LCD_R3 */
-						 <STM32_PINMUX('H', 10, AF14)>, /* LCD_R4 */
-						 <STM32_PINMUX('C',  0, AF14)>, /* LCD_R5 */
-						 <STM32_PINMUX('H', 12, AF14)>, /* LCD_R6 */
-						 <STM32_PINMUX('E', 15, AF14)>, /* LCD_R7 */
-						 <STM32_PINMUX('E',  5, AF14)>, /* LCD_G0 */
-						 <STM32_PINMUX('E',  6, AF14)>, /* LCD_G1 */
-						 <STM32_PINMUX('H', 13, AF14)>, /* LCD_G2 */
-						 <STM32_PINMUX('H', 14, AF14)>, /* LCD_G3 */
-						 <STM32_PINMUX('H', 15, AF14)>, /* LCD_G4 */
-						 <STM32_PINMUX('I',  0, AF14)>, /* LCD_G5 */
-						 <STM32_PINMUX('I',  1, AF14)>, /* LCD_G6 */
-						 <STM32_PINMUX('I',  2, AF14)>, /* LCD_G7 */
-						 <STM32_PINMUX('D',  9, AF14)>, /* LCD_B0 */
-						 <STM32_PINMUX('G', 12, AF14)>, /* LCD_B1 */
-						 <STM32_PINMUX('G', 10, AF14)>, /* LCD_B2 */
-						 <STM32_PINMUX('D', 10, AF14)>, /* LCD_B3 */
-						 <STM32_PINMUX('I',  4, AF14)>, /* LCD_B4 */
-						 <STM32_PINMUX('A',  3, AF14)>, /* LCD_B5 */
-						 <STM32_PINMUX('B',  8, AF14)>, /* LCD_B6 */
-						 <STM32_PINMUX('D',  8, AF14)>; /* LCD_B7 */
-					bias-disable;
-					drive-push-pull;
-					slew-rate = <1>;
-				};
-			};
-
-			ltdc_pins_sleep_a: ltdc-a-1 {
-				pins {
-					pinmux = <STM32_PINMUX('G',  7, ANALOG)>, /* LCD_CLK */
-						 <STM32_PINMUX('I', 10, ANALOG)>, /* LCD_HSYNC */
-						 <STM32_PINMUX('I',  9, ANALOG)>, /* LCD_VSYNC */
-						 <STM32_PINMUX('F', 10, ANALOG)>, /* LCD_DE */
-						 <STM32_PINMUX('H',  2, ANALOG)>, /* LCD_R0 */
-						 <STM32_PINMUX('H',  3, ANALOG)>, /* LCD_R1 */
-						 <STM32_PINMUX('H',  8, ANALOG)>, /* LCD_R2 */
-						 <STM32_PINMUX('H',  9, ANALOG)>, /* LCD_R3 */
-						 <STM32_PINMUX('H', 10, ANALOG)>, /* LCD_R4 */
-						 <STM32_PINMUX('C',  0, ANALOG)>, /* LCD_R5 */
-						 <STM32_PINMUX('H', 12, ANALOG)>, /* LCD_R6 */
-						 <STM32_PINMUX('E', 15, ANALOG)>, /* LCD_R7 */
-						 <STM32_PINMUX('E',  5, ANALOG)>, /* LCD_G0 */
-						 <STM32_PINMUX('E',  6, ANALOG)>, /* LCD_G1 */
-						 <STM32_PINMUX('H', 13, ANALOG)>, /* LCD_G2 */
-						 <STM32_PINMUX('H', 14, ANALOG)>, /* LCD_G3 */
-						 <STM32_PINMUX('H', 15, ANALOG)>, /* LCD_G4 */
-						 <STM32_PINMUX('I',  0, ANALOG)>, /* LCD_G5 */
-						 <STM32_PINMUX('I',  1, ANALOG)>, /* LCD_G6 */
-						 <STM32_PINMUX('I',  2, ANALOG)>, /* LCD_G7 */
-						 <STM32_PINMUX('D',  9, ANALOG)>, /* LCD_B0 */
-						 <STM32_PINMUX('G', 12, ANALOG)>, /* LCD_B1 */
-						 <STM32_PINMUX('G', 10, ANALOG)>, /* LCD_B2 */
-						 <STM32_PINMUX('D', 10, ANALOG)>, /* LCD_B3 */
-						 <STM32_PINMUX('I',  4, ANALOG)>, /* LCD_B4 */
-						 <STM32_PINMUX('A',  3, ANALOG)>, /* LCD_B5 */
-						 <STM32_PINMUX('B',  8, ANALOG)>, /* LCD_B6 */
-						 <STM32_PINMUX('D',  8, ANALOG)>; /* LCD_B7 */
-				};
-			};
-
-			ltdc_pins_b: ltdc-b-0 {
-				pins {
-					pinmux = <STM32_PINMUX('I', 14, AF14)>, /* LCD_CLK */
-						 <STM32_PINMUX('I', 12, AF14)>, /* LCD_HSYNC */
-						 <STM32_PINMUX('I', 13, AF14)>, /* LCD_VSYNC */
-						 <STM32_PINMUX('K',  7, AF14)>, /* LCD_DE */
-						 <STM32_PINMUX('I', 15, AF14)>, /* LCD_R0 */
-						 <STM32_PINMUX('J',  0, AF14)>, /* LCD_R1 */
-						 <STM32_PINMUX('J',  1, AF14)>, /* LCD_R2 */
-						 <STM32_PINMUX('J',  2, AF14)>, /* LCD_R3 */
-						 <STM32_PINMUX('J',  3, AF14)>, /* LCD_R4 */
-						 <STM32_PINMUX('J',  4, AF14)>, /* LCD_R5 */
-						 <STM32_PINMUX('J',  5, AF14)>, /* LCD_R6 */
-						 <STM32_PINMUX('J',  6, AF14)>, /* LCD_R7 */
-						 <STM32_PINMUX('J',  7, AF14)>, /* LCD_G0 */
-						 <STM32_PINMUX('J',  8, AF14)>, /* LCD_G1 */
-						 <STM32_PINMUX('J',  9, AF14)>, /* LCD_G2 */
-						 <STM32_PINMUX('J', 10, AF14)>, /* LCD_G3 */
-						 <STM32_PINMUX('J', 11, AF14)>, /* LCD_G4 */
-						 <STM32_PINMUX('K',  0, AF14)>, /* LCD_G5 */
-						 <STM32_PINMUX('K',  1, AF14)>, /* LCD_G6 */
-						 <STM32_PINMUX('K',  2, AF14)>, /* LCD_G7 */
-						 <STM32_PINMUX('J', 12, AF14)>, /* LCD_B0 */
-						 <STM32_PINMUX('J', 13, AF14)>, /* LCD_B1 */
-						 <STM32_PINMUX('J', 14, AF14)>, /* LCD_B2 */
-						 <STM32_PINMUX('J', 15, AF14)>, /* LCD_B3 */
-						 <STM32_PINMUX('K',  3, AF14)>, /* LCD_B4 */
-						 <STM32_PINMUX('K',  4, AF14)>, /* LCD_B5 */
-						 <STM32_PINMUX('K',  5, AF14)>, /* LCD_B6 */
-						 <STM32_PINMUX('K',  6, AF14)>; /* LCD_B7 */
-					bias-disable;
-					drive-push-pull;
-					slew-rate = <1>;
-				};
-			};
-
-			ltdc_pins_sleep_b: ltdc-b-1 {
-				pins {
-					pinmux = <STM32_PINMUX('I', 14, ANALOG)>, /* LCD_CLK */
-						 <STM32_PINMUX('I', 12, ANALOG)>, /* LCD_HSYNC */
-						 <STM32_PINMUX('I', 13, ANALOG)>, /* LCD_VSYNC */
-						 <STM32_PINMUX('K',  7, ANALOG)>, /* LCD_DE */
-						 <STM32_PINMUX('I', 15, ANALOG)>, /* LCD_R0 */
-						 <STM32_PINMUX('J',  0, ANALOG)>, /* LCD_R1 */
-						 <STM32_PINMUX('J',  1, ANALOG)>, /* LCD_R2 */
-						 <STM32_PINMUX('J',  2, ANALOG)>, /* LCD_R3 */
-						 <STM32_PINMUX('J',  3, ANALOG)>, /* LCD_R4 */
-						 <STM32_PINMUX('J',  4, ANALOG)>, /* LCD_R5 */
-						 <STM32_PINMUX('J',  5, ANALOG)>, /* LCD_R6 */
-						 <STM32_PINMUX('J',  6, ANALOG)>, /* LCD_R7 */
-						 <STM32_PINMUX('J',  7, ANALOG)>, /* LCD_G0 */
-						 <STM32_PINMUX('J',  8, ANALOG)>, /* LCD_G1 */
-						 <STM32_PINMUX('J',  9, ANALOG)>, /* LCD_G2 */
-						 <STM32_PINMUX('J', 10, ANALOG)>, /* LCD_G3 */
-						 <STM32_PINMUX('J', 11, ANALOG)>, /* LCD_G4 */
-						 <STM32_PINMUX('K',  0, ANALOG)>, /* LCD_G5 */
-						 <STM32_PINMUX('K',  1, ANALOG)>, /* LCD_G6 */
-						 <STM32_PINMUX('K',  2, ANALOG)>, /* LCD_G7 */
-						 <STM32_PINMUX('J', 12, ANALOG)>, /* LCD_B0 */
-						 <STM32_PINMUX('J', 13, ANALOG)>, /* LCD_B1 */
-						 <STM32_PINMUX('J', 14, ANALOG)>, /* LCD_B2 */
-						 <STM32_PINMUX('J', 15, ANALOG)>, /* LCD_B3 */
-						 <STM32_PINMUX('K',  3, ANALOG)>, /* LCD_B4 */
-						 <STM32_PINMUX('K',  4, ANALOG)>, /* LCD_B5 */
-						 <STM32_PINMUX('K',  5, ANALOG)>, /* LCD_B6 */
-						 <STM32_PINMUX('K',  6, ANALOG)>; /* LCD_B7 */
-				};
-			};
-
-			m_can1_pins_a: m-can1-0 {
-				pins1 {
-					pinmux = <STM32_PINMUX('H', 13, AF9)>; /* CAN1_TX */
-					slew-rate = <1>;
-					drive-push-pull;
-					bias-disable;
-				};
-				pins2 {
-					pinmux = <STM32_PINMUX('I', 9, AF9)>; /* CAN1_RX */
-					bias-disable;
-				};
-			};
-
-			m_can1_sleep_pins_a: m_can1-sleep-0 {
-				pins {
-					pinmux = <STM32_PINMUX('H', 13, ANALOG)>, /* CAN1_TX */
-						 <STM32_PINMUX('I', 9, ANALOG)>; /* CAN1_RX */
-				};
-			};
-
-			pwm2_pins_a: pwm2-0 {
-				pins {
-					pinmux = <STM32_PINMUX('A', 3, AF1)>; /* TIM2_CH4 */
-					bias-pull-down;
-					drive-push-pull;
-					slew-rate = <0>;
-				};
-			};
-
-			pwm8_pins_a: pwm8-0 {
-				pins {
-					pinmux = <STM32_PINMUX('I', 2, AF3)>; /* TIM8_CH4 */
-					bias-pull-down;
-					drive-push-pull;
-					slew-rate = <0>;
-				};
-			};
-
-			pwm12_pins_a: pwm12-0 {
-				pins {
-					pinmux = <STM32_PINMUX('H', 6, AF2)>; /* TIM12_CH1 */
-					bias-pull-down;
-					drive-push-pull;
-					slew-rate = <0>;
-				};
-			};
-
-			qspi_clk_pins_a: qspi-clk-0 {
-				pins {
-					pinmux = <STM32_PINMUX('F', 10, AF9)>; /* QSPI_CLK */
-					bias-disable;
-					drive-push-pull;
-					slew-rate = <3>;
-				};
-			};
-
-			qspi_clk_sleep_pins_a: qspi-clk-sleep-0 {
-				pins {
-					pinmux = <STM32_PINMUX('F', 10, ANALOG)>; /* QSPI_CLK */
-				};
-			};
-
-			qspi_bk1_pins_a: qspi-bk1-0 {
-				pins1 {
-					pinmux = <STM32_PINMUX('F', 8, AF10)>, /* QSPI_BK1_IO0 */
-						 <STM32_PINMUX('F', 9, AF10)>, /* QSPI_BK1_IO1 */
-						 <STM32_PINMUX('F', 7, AF9)>, /* QSPI_BK1_IO2 */
-						 <STM32_PINMUX('F', 6, AF9)>; /* QSPI_BK1_IO3 */
-					bias-disable;
-					drive-push-pull;
-					slew-rate = <1>;
-				};
-				pins2 {
-					pinmux = <STM32_PINMUX('B', 6, AF10)>; /* QSPI_BK1_NCS */
-					bias-pull-up;
-					drive-push-pull;
-					slew-rate = <1>;
-				};
-			};
-
-			qspi_bk1_sleep_pins_a: qspi-bk1-sleep-0 {
-				pins {
-					pinmux = <STM32_PINMUX('F', 8, ANALOG)>, /* QSPI_BK1_IO0 */
-						 <STM32_PINMUX('F', 9, ANALOG)>, /* QSPI_BK1_IO1 */
-						 <STM32_PINMUX('F', 7, ANALOG)>, /* QSPI_BK1_IO2 */
-						 <STM32_PINMUX('F', 6, ANALOG)>, /* QSPI_BK1_IO3 */
-						 <STM32_PINMUX('B', 6, ANALOG)>; /* QSPI_BK1_NCS */
-				};
-			};
-
-			qspi_bk2_pins_a: qspi-bk2-0 {
-				pins1 {
-					pinmux = <STM32_PINMUX('H', 2, AF9)>, /* QSPI_BK2_IO0 */
-						 <STM32_PINMUX('H', 3, AF9)>, /* QSPI_BK2_IO1 */
-						 <STM32_PINMUX('G', 10, AF11)>, /* QSPI_BK2_IO2 */
-						 <STM32_PINMUX('G', 7, AF11)>; /* QSPI_BK2_IO3 */
-					bias-disable;
-					drive-push-pull;
-					slew-rate = <1>;
-				};
-				pins2 {
-					pinmux = <STM32_PINMUX('C', 0, AF10)>; /* QSPI_BK2_NCS */
-					bias-pull-up;
-					drive-push-pull;
-					slew-rate = <1>;
-				};
-			};
-
-			qspi_bk2_sleep_pins_a: qspi-bk2-sleep-0 {
-				pins {
-					pinmux = <STM32_PINMUX('H', 2, ANALOG)>, /* QSPI_BK2_IO0 */
-						 <STM32_PINMUX('H', 3, ANALOG)>, /* QSPI_BK2_IO1 */
-						 <STM32_PINMUX('G', 10, ANALOG)>, /* QSPI_BK2_IO2 */
-						 <STM32_PINMUX('G', 7, ANALOG)>, /* QSPI_BK2_IO3 */
-						 <STM32_PINMUX('C', 0, ANALOG)>; /* QSPI_BK2_NCS */
-				};
-			};
-
-			sai2a_pins_a: sai2a-0 {
-				pins {
-					pinmux = <STM32_PINMUX('I', 5, AF10)>, /* SAI2_SCK_A */
-						 <STM32_PINMUX('I', 6, AF10)>, /* SAI2_SD_A */
-						 <STM32_PINMUX('I', 7, AF10)>, /* SAI2_FS_A */
-						 <STM32_PINMUX('E', 0, AF10)>; /* SAI2_MCLK_A */
-					slew-rate = <0>;
-					drive-push-pull;
-					bias-disable;
-				};
-			};
-
-			sai2a_sleep_pins_a: sai2a-1 {
-				pins {
-					pinmux = <STM32_PINMUX('I', 5, ANALOG)>, /* SAI2_SCK_A */
-						 <STM32_PINMUX('I', 6, ANALOG)>, /* SAI2_SD_A */
-						 <STM32_PINMUX('I', 7, ANALOG)>, /* SAI2_FS_A */
-						 <STM32_PINMUX('E', 0, ANALOG)>; /* SAI2_MCLK_A */
-				};
-			};
-
-			sai2b_pins_a: sai2b-0 {
-				pins1 {
-					pinmux = <STM32_PINMUX('E', 12, AF10)>, /* SAI2_SCK_B */
-						 <STM32_PINMUX('E', 13, AF10)>, /* SAI2_FS_B */
-						 <STM32_PINMUX('E', 14, AF10)>; /* SAI2_MCLK_B */
-					slew-rate = <0>;
-					drive-push-pull;
-					bias-disable;
-				};
-				pins2 {
-					pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */
-					bias-disable;
-				};
-			};
-
-			sai2b_sleep_pins_a: sai2b-1 {
-				pins {
-					pinmux = <STM32_PINMUX('F', 11, ANALOG)>, /* SAI2_SD_B */
-						 <STM32_PINMUX('E', 12, ANALOG)>, /* SAI2_SCK_B */
-						 <STM32_PINMUX('E', 13, ANALOG)>, /* SAI2_FS_B */
-						 <STM32_PINMUX('E', 14, ANALOG)>; /* SAI2_MCLK_B */
-				};
-			};
-
-			sai2b_pins_b: sai2b-2 {
-				pins {
-					pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */
-					bias-disable;
-				};
-			};
-
-			sai2b_sleep_pins_b: sai2b-3 {
-				pins {
-					pinmux = <STM32_PINMUX('F', 11, ANALOG)>; /* SAI2_SD_B */
-				};
-			};
-
-			sai4a_pins_a: sai4a-0 {
-				pins {
-					pinmux = <STM32_PINMUX('B', 5, AF10)>; /* SAI4_SD_A */
-					slew-rate = <0>;
-					drive-push-pull;
-					bias-disable;
-				};
-			};
-
-			sai4a_sleep_pins_a: sai4a-1 {
-				pins {
-					pinmux = <STM32_PINMUX('B', 5, ANALOG)>; /* SAI4_SD_A */
-				};
-			};
-
-			sdmmc1_b4_pins_a: sdmmc1-b4-0 {
-				pins {
-					pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
-						 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
-						 <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
-						 <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
-						 <STM32_PINMUX('C', 12, AF12)>, /* SDMMC1_CK */
-						 <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
-					slew-rate = <3>;
-					drive-push-pull;
-					bias-disable;
-				};
-			};
-
-			sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 {
-				pins1 {
-					pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
-						 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
-						 <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
-						 <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
-						 <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
-					slew-rate = <3>;
-					drive-push-pull;
-					bias-disable;
-				};
-				pins2{
-					pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
-					slew-rate = <3>;
-					drive-open-drain;
-					bias-disable;
-				};
-			};
-
-			sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 {
-				pins {
-					pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */
-						 <STM32_PINMUX('C', 9, ANALOG)>, /* SDMMC1_D1 */
-						 <STM32_PINMUX('C', 10, ANALOG)>, /* SDMMC1_D2 */
-						 <STM32_PINMUX('C', 11, ANALOG)>, /* SDMMC1_D3 */
-						 <STM32_PINMUX('C', 12, ANALOG)>, /* SDMMC1_CK */
-						 <STM32_PINMUX('D', 2, ANALOG)>; /* SDMMC1_CMD */
-				};
-			};
-
-			sdmmc1_dir_pins_a: sdmmc1-dir-0 {
-				pins1 {
-					pinmux = <STM32_PINMUX('F', 2, AF11)>, /* SDMMC1_D0DIR */
-						 <STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */
-						 <STM32_PINMUX('B', 9, AF11)>; /* SDMMC1_CDIR */
-					slew-rate = <3>;
-					drive-push-pull;
-					bias-pull-up;
-				};
-				pins2{
-					pinmux = <STM32_PINMUX('E', 4, AF8)>; /* SDMMC1_CKIN */
-					bias-pull-up;
-				};
-			};
-
-			sdmmc1_dir_sleep_pins_a: sdmmc1-dir-sleep-0 {
-				pins {
-					pinmux = <STM32_PINMUX('F', 2, ANALOG)>, /* SDMMC1_D0DIR */
-						 <STM32_PINMUX('C', 7, ANALOG)>, /* SDMMC1_D123DIR */
-						 <STM32_PINMUX('B', 9, ANALOG)>, /* SDMMC1_CDIR */
-						 <STM32_PINMUX('E', 4, ANALOG)>; /* SDMMC1_CKIN */
-				};
-			};
-
-			spdifrx_pins_a: spdifrx-0 {
-				pins {
-					pinmux = <STM32_PINMUX('G', 12, AF8)>; /* SPDIF_IN1 */
-					bias-disable;
-				};
-			};
-
-			spdifrx_sleep_pins_a: spdifrx-1 {
-				pins {
-					pinmux = <STM32_PINMUX('G', 12, ANALOG)>; /* SPDIF_IN1 */
-				};
-			};
-
-			uart4_pins_a: uart4-0 {
-				pins1 {
-					pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
-					bias-disable;
-					drive-push-pull;
-					slew-rate = <0>;
-				};
-				pins2 {
-					pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
-					bias-disable;
-				};
-			};
-
-			uart4_pins_b: uart4-1 {
-				pins1 {
-					pinmux = <STM32_PINMUX('D', 1, AF8)>; /* UART4_TX */
-					bias-disable;
-					drive-push-pull;
-					slew-rate = <0>;
-				};
-				pins2 {
-					pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
-					bias-disable;
-				};
-			};
-
-			uart7_pins_a: uart7-0 {
-				pins1 {
-					pinmux = <STM32_PINMUX('E', 8, AF7)>; /* UART4_TX */
-					bias-disable;
-					drive-push-pull;
-					slew-rate = <0>;
-				};
-				pins2 {
-					pinmux = <STM32_PINMUX('E', 7, AF7)>, /* UART4_RX */
-						 <STM32_PINMUX('E', 10, AF7)>, /* UART4_CTS */
-						 <STM32_PINMUX('E', 9, AF7)>; /* UART4_RTS */
-					bias-disable;
-				};
-			};
-		};
-
-		pinctrl_z: pin-controller-z@54004000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "st,stm32mp157-z-pinctrl";
-			ranges = <0 0x54004000 0x400>;
-			pins-are-numbered;
-			interrupt-parent = <&exti>;
-			st,syscfg = <&exti 0x60 0xff>;
-
-			gpioz: gpio@54004000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0 0x400>;
-				clocks = <&rcc GPIOZ>;
-				st,bank-name = "GPIOZ";
-				st,bank-ioport = <11>;
-				status = "disabled";
-			};
-
-			i2c2_pins_b2: i2c2-0 {
-				pins {
-					pinmux = <STM32_PINMUX('Z', 0, AF3)>; /* I2C2_SCL */
-					bias-disable;
-					drive-open-drain;
-					slew-rate = <0>;
-				};
-			};
-
-			i2c2_pins_sleep_b2: i2c2-1 {
-				pins {
-					pinmux = <STM32_PINMUX('Z', 0, ANALOG)>; /* I2C2_SCL */
-				};
-			};
-
-			i2c4_pins_a: i2c4-0 {
-				pins {
-					pinmux = <STM32_PINMUX('Z', 4, AF6)>, /* I2C4_SCL */
-						 <STM32_PINMUX('Z', 5, AF6)>; /* I2C4_SDA */
-					bias-disable;
-					drive-open-drain;
-					slew-rate = <0>;
-				};
-			};
-
-			i2c4_pins_sleep_a: i2c4-1 {
-				pins {
-					pinmux = <STM32_PINMUX('Z', 4, ANALOG)>, /* I2C4_SCL */
-						 <STM32_PINMUX('Z', 5, ANALOG)>; /* I2C4_SDA */
-				};
-			};
-
-			spi1_pins_a: spi1-0 {
-				pins1 {
-					pinmux = <STM32_PINMUX('Z', 0, AF5)>, /* SPI1_SCK */
-						 <STM32_PINMUX('Z', 2, AF5)>; /* SPI1_MOSI */
-					bias-disable;
-					drive-push-pull;
-					slew-rate = <1>;
-				};
-
-				pins2 {
-					pinmux = <STM32_PINMUX('Z', 1, AF5)>; /* SPI1_MISO */
-					bias-disable;
-				};
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/stm32mp157.dtsi b/arch/arm/boot/dts/stm32mp157.dtsi
new file mode 100644
index 000000000000..3f0a4a91cce6
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157.dtsi
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+#include "stm32mp153.dtsi"
+
+/ {
+	soc {
+		gpu: gpu@59000000 {
+			compatible = "vivante,gc";
+			reg = <0x59000000 0x800>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc GPU>, <&rcc GPU_K>;
+			clock-names = "bus" ,"core";
+			resets = <&rcc GPU_R>;
+			status = "disabled";
+		};
+
+		dsi: dsi@5a000000 {
+			compatible = "st,stm32-dsi";
+			reg = <0x5a000000 0x800>;
+			clocks = <&rcc DSI_K>, <&clk_hse>, <&rcc DSI_PX>;
+			clock-names = "pclk", "ref", "px_clk";
+			resets = <&rcc DSI_R>;
+			reset-names = "apb";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/stm32mp157a-avenger96.dts b/arch/arm/boot/dts/stm32mp157a-avenger96.dts
index 628c74a45a25..cbfa4075907e 100644
--- a/arch/arm/boot/dts/stm32mp157a-avenger96.dts
+++ b/arch/arm/boot/dts/stm32mp157a-avenger96.dts
@@ -6,8 +6,9 @@
 
 /dts-v1/;
 
-#include "stm32mp157c.dtsi"
-#include "stm32mp157xac-pinctrl.dtsi"
+#include "stm32mp157.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxac-pinctrl.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/mfd/st,stpmic1.h>
 
diff --git a/arch/arm/boot/dts/stm32mp157a-dk1.dts b/arch/arm/boot/dts/stm32mp157a-dk1.dts
index 984a47cbd13d..d03d4cd2606a 100644
--- a/arch/arm/boot/dts/stm32mp157a-dk1.dts
+++ b/arch/arm/boot/dts/stm32mp157a-dk1.dts
@@ -6,10 +6,10 @@
 
 /dts-v1/;
 
-#include "stm32mp157c.dtsi"
-#include "stm32mp157xac-pinctrl.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/mfd/st,stpmic1.h>
+#include "stm32mp157.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxac-pinctrl.dtsi"
+#include "stm32mp15xx-dkx.dtsi"
 
 / {
 	model = "STMicroelectronics STM32MP157A-DK1 Discovery Board";
@@ -23,494 +23,4 @@
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
-
-	memory@c0000000 {
-		device_type = "memory";
-		reg = <0xc0000000 0x20000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		mcuram2: mcuram2@10000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x10000000 0x40000>;
-			no-map;
-		};
-
-		vdev0vring0: vdev0vring0@10040000 {
-			compatible = "shared-dma-pool";
-			reg = <0x10040000 0x1000>;
-			no-map;
-		};
-
-		vdev0vring1: vdev0vring1@10041000 {
-			compatible = "shared-dma-pool";
-			reg = <0x10041000 0x1000>;
-			no-map;
-		};
-
-		vdev0buffer: vdev0buffer@10042000 {
-			compatible = "shared-dma-pool";
-			reg = <0x10042000 0x4000>;
-			no-map;
-		};
-
-		mcuram: mcuram@30000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x30000000 0x40000>;
-			no-map;
-		};
-
-		retram: retram@38000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x38000000 0x10000>;
-			no-map;
-		};
-
-		gpu_reserved: gpu@d4000000 {
-			reg = <0xd4000000 0x4000000>;
-			no-map;
-		};
-	};
-
-	led {
-		compatible = "gpio-leds";
-		blue {
-			label = "heartbeat";
-			gpios = <&gpiod 11 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-			default-state = "off";
-		};
-	};
-
-	sound {
-		compatible = "audio-graph-card";
-		label = "STM32MP1-DK";
-		routing =
-			"Playback" , "MCLK",
-			"Capture" , "MCLK",
-			"MICL" , "Mic Bias";
-		dais = <&sai2a_port &sai2b_port &i2s2_port>;
-		status = "okay";
-	};
-};
-
-&adc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&adc12_ain_pins_a>, <&adc12_usb_cc_pins_a>;
-	vdd-supply = <&vdd>;
-	vdda-supply = <&vdd>;
-	vref-supply = <&vrefbuf>;
-	status = "disabled";
-	adc1: adc@0 {
-		/*
-		 * Type-C USB_PWR_CC1 & USB_PWR_CC2 on in18 & in19.
-		 * Use at least 5 * RC time, e.g. 5 * (Rp + Rd) * C:
-		 * 5 * (56 + 47kOhms) * 5pF => 2.5us.
-		 * Use arbitrary margin here (e.g. 5us).
-		 */
-		st,min-sample-time-nsecs = <5000>;
-		/* AIN connector, USB Type-C CC1 & CC2 */
-		st,adc-channels = <0 1 6 13 18 19>;
-		status = "okay";
-	};
-	adc2: adc@100 {
-		/* AIN connector, USB Type-C CC1 & CC2 */
-		st,adc-channels = <0 1 2 6 18 19>;
-		st,min-sample-time-nsecs = <5000>;
-		status = "okay";
-	};
-};
-
-&cec {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cec_pins_b>;
-	pinctrl-1 = <&cec_pins_sleep_b>;
-	status = "okay";
-};
-
-&ethernet0 {
-	status = "okay";
-	pinctrl-0 = <&ethernet0_rgmii_pins_a>;
-	pinctrl-1 = <&ethernet0_rgmii_pins_sleep_a>;
-	pinctrl-names = "default", "sleep";
-	phy-mode = "rgmii-id";
-	max-speed = <1000>;
-	phy-handle = <&phy0>;
-
-	mdio0 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "snps,dwmac-mdio";
-		phy0: ethernet-phy@0 {
-			reg = <0>;
-		};
-	};
-};
-
-&gpu {
-	contiguous-area = <&gpu_reserved>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&i2c1_pins_a>;
-	pinctrl-1 = <&i2c1_pins_sleep_a>;
-	i2c-scl-rising-time-ns = <100>;
-	i2c-scl-falling-time-ns = <7>;
-	status = "okay";
-	/delete-property/dmas;
-	/delete-property/dma-names;
-
-	hdmi-transmitter@39 {
-		compatible = "sil,sii9022";
-		reg = <0x39>;
-		iovcc-supply = <&v3v3_hdmi>;
-		cvcc12-supply = <&v1v2_hdmi>;
-		reset-gpios = <&gpioa 10 GPIO_ACTIVE_LOW>;
-		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
-		interrupt-parent = <&gpiog>;
-		#sound-dai-cells = <0>;
-		status = "okay";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				sii9022_in: endpoint {
-					remote-endpoint = <&ltdc_ep0_out>;
-				};
-			};
-
-			port@3 {
-				reg = <3>;
-				sii9022_tx_endpoint: endpoint {
-					remote-endpoint = <&i2s2_endpoint>;
-				};
-			};
-		};
-	};
-
-	cs42l51: cs42l51@4a {
-		compatible = "cirrus,cs42l51";
-		reg = <0x4a>;
-		#sound-dai-cells = <0>;
-		VL-supply = <&v3v3>;
-		VD-supply = <&v1v8_audio>;
-		VA-supply = <&v1v8_audio>;
-		VAHP-supply = <&v1v8_audio>;
-		reset-gpios = <&gpiog 9 GPIO_ACTIVE_LOW>;
-		clocks = <&sai2a>;
-		clock-names = "MCLK";
-		status = "okay";
-
-		cs42l51_port: port {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cs42l51_tx_endpoint: endpoint@0 {
-				reg = <0>;
-				remote-endpoint = <&sai2a_endpoint>;
-				frame-master;
-				bitclock-master;
-			};
-
-			cs42l51_rx_endpoint: endpoint@1 {
-				reg = <1>;
-				remote-endpoint = <&sai2b_endpoint>;
-				frame-master;
-				bitclock-master;
-			};
-		};
-	};
-};
-
-&i2c4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c4_pins_a>;
-	i2c-scl-rising-time-ns = <185>;
-	i2c-scl-falling-time-ns = <20>;
-	status = "okay";
-	/* spare dmas for other usage */
-	/delete-property/dmas;
-	/delete-property/dma-names;
-
-	pmic: stpmic@33 {
-		compatible = "st,stpmic1";
-		reg = <0x33>;
-		interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		status = "okay";
-
-		regulators {
-			compatible = "st,stpmic1-regulators";
-			ldo1-supply = <&v3v3>;
-			ldo3-supply = <&vdd_ddr>;
-			ldo6-supply = <&v3v3>;
-			pwr_sw1-supply = <&bst_out>;
-			pwr_sw2-supply = <&bst_out>;
-
-			vddcore: buck1 {
-				regulator-name = "vddcore";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-				regulator-initial-mode = <0>;
-				regulator-over-current-protection;
-			};
-
-			vdd_ddr: buck2 {
-				regulator-name = "vdd_ddr";
-				regulator-min-microvolt = <1350000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-				regulator-initial-mode = <0>;
-				regulator-over-current-protection;
-			};
-
-			vdd: buck3 {
-				regulator-name = "vdd";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-				st,mask-reset;
-				regulator-initial-mode = <0>;
-				regulator-over-current-protection;
-			};
-
-			v3v3: buck4 {
-				regulator-name = "v3v3";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-				regulator-over-current-protection;
-				regulator-initial-mode = <0>;
-			};
-
-			v1v8_audio: ldo1 {
-				regulator-name = "v1v8_audio";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				interrupts = <IT_CURLIM_LDO1 0>;
-			};
-
-			v3v3_hdmi: ldo2 {
-				regulator-name = "v3v3_hdmi";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-				interrupts = <IT_CURLIM_LDO2 0>;
-			};
-
-			vtt_ddr: ldo3 {
-				regulator-name = "vtt_ddr";
-				regulator-min-microvolt = <500000>;
-				regulator-max-microvolt = <750000>;
-				regulator-always-on;
-				regulator-over-current-protection;
-			};
-
-			vdd_usb: ldo4 {
-				regulator-name = "vdd_usb";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				interrupts = <IT_CURLIM_LDO4 0>;
-			};
-
-			vdda: ldo5 {
-				regulator-name = "vdda";
-				regulator-min-microvolt = <2900000>;
-				regulator-max-microvolt = <2900000>;
-				interrupts = <IT_CURLIM_LDO5 0>;
-				regulator-boot-on;
-			};
-
-			v1v2_hdmi: ldo6 {
-				regulator-name = "v1v2_hdmi";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-				interrupts = <IT_CURLIM_LDO6 0>;
-			};
-
-			vref_ddr: vref_ddr {
-				regulator-name = "vref_ddr";
-				regulator-always-on;
-				regulator-over-current-protection;
-			};
-
-			 bst_out: boost {
-				regulator-name = "bst_out";
-				interrupts = <IT_OCP_BOOST 0>;
-			 };
-
-			vbus_otg: pwr_sw1 {
-				regulator-name = "vbus_otg";
-				interrupts = <IT_OCP_OTG 0>;
-			 };
-
-			 vbus_sw: pwr_sw2 {
-				regulator-name = "vbus_sw";
-				interrupts = <IT_OCP_SWOUT 0>;
-				regulator-active-discharge = <1>;
-			 };
-		};
-
-		onkey {
-			compatible = "st,stpmic1-onkey";
-			interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>;
-			interrupt-names = "onkey-falling", "onkey-rising";
-			power-off-time-sec = <10>;
-			status = "okay";
-		};
-
-		watchdog {
-			compatible = "st,stpmic1-wdt";
-			status = "disabled";
-		};
-	};
-};
-
-&i2s2 {
-	clocks = <&rcc SPI2>, <&rcc SPI2_K>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
-	clock-names = "pclk", "i2sclk", "x8k", "x11k";
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&i2s2_pins_a>;
-	pinctrl-1 = <&i2s2_pins_sleep_a>;
-	status = "okay";
-
-	i2s2_port: port {
-		i2s2_endpoint: endpoint {
-			remote-endpoint = <&sii9022_tx_endpoint>;
-			format = "i2s";
-			mclk-fs = <256>;
-		};
-	};
-};
-
-&ipcc {
-	status = "okay";
-};
-
-&iwdg2 {
-	timeout-sec = <32>;
-	status = "okay";
-};
-
-&ltdc {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&ltdc_pins_a>;
-	pinctrl-1 = <&ltdc_pins_sleep_a>;
-	status = "okay";
-
-	port {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ltdc_ep0_out: endpoint@0 {
-			reg = <0>;
-			remote-endpoint = <&sii9022_in>;
-		};
-	};
-};
-
-&m4_rproc {
-	memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
-			<&vdev0vring1>, <&vdev0buffer>;
-	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
-	mbox-names = "vq0", "vq1", "shutdown";
-	interrupt-parent = <&exti>;
-	interrupts = <68 1>;
-	status = "okay";
-};
-
-&pwr_regulators {
-	vdd-supply = <&vdd>;
-	vdd_3v3_usbfs-supply = <&vdd_usb>;
-};
-
-&rng1 {
-	status = "okay";
-};
-
-&rtc {
-	status = "okay";
-};
-
-&sai2 {
-	clocks = <&rcc SAI2>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
-	clock-names = "pclk", "x8k", "x11k";
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&sai2a_pins_a>, <&sai2b_pins_b>;
-	pinctrl-1 = <&sai2a_sleep_pins_a>, <&sai2b_sleep_pins_b>;
-	status = "okay";
-
-	sai2a: audio-controller@4400b004 {
-		#clock-cells = <0>;
-		dma-names = "tx";
-		clocks = <&rcc SAI2_K>;
-		clock-names = "sai_ck";
-		status = "okay";
-
-		sai2a_port: port {
-			sai2a_endpoint: endpoint {
-				remote-endpoint = <&cs42l51_tx_endpoint>;
-				format = "i2s";
-				mclk-fs = <256>;
-				dai-tdm-slot-num = <2>;
-				dai-tdm-slot-width = <32>;
-			};
-		};
-	};
-
-	sai2b: audio-controller@4400b024 {
-		dma-names = "rx";
-		st,sync = <&sai2a 2>;
-		clocks = <&rcc SAI2_K>, <&sai2a>;
-		clock-names = "sai_ck", "MCLK";
-		status = "okay";
-
-		sai2b_port: port {
-			sai2b_endpoint: endpoint {
-				remote-endpoint = <&cs42l51_rx_endpoint>;
-				format = "i2s";
-				mclk-fs = <256>;
-				dai-tdm-slot-num = <2>;
-				dai-tdm-slot-width = <32>;
-			};
-		};
-	};
-};
-
-&sdmmc1 {
-	pinctrl-names = "default", "opendrain", "sleep";
-	pinctrl-0 = <&sdmmc1_b4_pins_a>;
-	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
-	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
-	broken-cd;
-	st,neg-edge;
-	bus-width = <4>;
-	vmmc-supply = <&v3v3>;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart4_pins_a>;
-	status = "okay";
-};
-
-&vrefbuf {
-	regulator-min-microvolt = <2500000>;
-	regulator-max-microvolt = <2500000>;
-	vdda-supply = <&vdd>;
-	status = "okay";
 };
diff --git a/arch/arm/boot/dts/stm32mp157c-dk2.dts b/arch/arm/boot/dts/stm32mp157c-dk2.dts
index d26adcbeba33..7985b80967ca 100644
--- a/arch/arm/boot/dts/stm32mp157c-dk2.dts
+++ b/arch/arm/boot/dts/stm32mp157c-dk2.dts
@@ -6,11 +6,24 @@
 
 /dts-v1/;
 
-#include "stm32mp157a-dk1.dts"
+#include "stm32mp157.dtsi"
+#include "stm32mp15xc.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxac-pinctrl.dtsi"
+#include "stm32mp15xx-dkx.dtsi"
 
 / {
 	model = "STMicroelectronics STM32MP157C-DK2 Discovery Board";
 	compatible = "st,stm32mp157c-dk2", "st,stm32mp157";
+
+	aliases {
+		ethernet0 = &ethernet0;
+		serial0 = &uart4;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
 };
 
 &dsi {
diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts
index b8cc0fb0ec48..1fc43251d697 100644
--- a/arch/arm/boot/dts/stm32mp157c-ed1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts
@@ -5,8 +5,10 @@
  */
 /dts-v1/;
 
-#include "stm32mp157c.dtsi"
-#include "stm32mp157xaa-pinctrl.dtsi"
+#include "stm32mp157.dtsi"
+#include "stm32mp15xc.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxaa-pinctrl.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/mfd/st,stpmic1.h>
 
@@ -89,6 +91,22 @@
 	};
 };
 
+&adc {
+	/* ANA0, ANA1 are dedicated pins and don't need pinctrl: only in6. */
+	pinctrl-0 = <&adc1_in6_pins_a>;
+	pinctrl-names = "default";
+	vdd-supply = <&vdd>;
+	vdda-supply = <&vdda>;
+	vref-supply = <&vdda>;
+	status = "disabled";
+	adc1: adc@0 {
+		st,adc-channels = <0 1 6>;
+		/* 16.5 ck_cycles sampling time */
+		st,min-sample-time-nsecs = <400>;
+		status = "okay";
+	};
+};
+
 &dac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&dac_ch1_pins_a &dac_ch2_pins_a>;
@@ -305,6 +323,22 @@
 	status = "okay";
 };
 
+&sdmmc2 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>;
+	pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_a>;
+	pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_a>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	st,neg-edge;
+	bus-width = <8>;
+	vmmc-supply = <&v3v3>;
+	vqmmc-supply = <&v3v3>;
+	mmc-ddr-3_3v;
+	status = "okay";
+};
+
 &timers6 {
 	status = "okay";
 	/* spare dmas for other usage */
diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts
index 3789312c8539..228e35e16884 100644
--- a/arch/arm/boot/dts/stm32mp157c-ev1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts
@@ -283,6 +283,18 @@
 	};
 };
 
+&sdmmc3 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc3_b4_pins_a>;
+	pinctrl-1 = <&sdmmc3_b4_od_pins_a>;
+	pinctrl-2 = <&sdmmc3_b4_sleep_pins_a>;
+	broken-cd;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&v3v3>;
+	status = "disabled";
+};
+
 &spi1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&spi1_pins_a>;
@@ -296,7 +308,8 @@
 	status = "disabled";
 	pwm {
 		pinctrl-0 = <&pwm2_pins_a>;
-		pinctrl-names = "default";
+		pinctrl-1 = <&pwm2_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
 		status = "okay";
 	};
 	timer@1 {
@@ -310,7 +323,8 @@
 	status = "disabled";
 	pwm {
 		pinctrl-0 = <&pwm8_pins_a>;
-		pinctrl-names = "default";
+		pinctrl-1 = <&pwm8_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
 		status = "okay";
 	};
 	timer@7 {
@@ -324,7 +338,8 @@
 	status = "disabled";
 	pwm {
 		pinctrl-0 = <&pwm12_pins_a>;
-		pinctrl-names = "default";
+		pinctrl-1 = <&pwm12_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
 		status = "okay";
 	};
 	timer@11 {
@@ -340,6 +355,7 @@
 &usbotg_hs {
 	dr_mode = "peripheral";
 	phys = <&usbphyc_port1 0>;
+	phy-names = "usb2-phy";
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/stm32mp157xaa-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157xaa-pinctrl.dtsi
deleted file mode 100644
index 875adf5e1e30..000000000000
--- a/arch/arm/boot/dts/stm32mp157xaa-pinctrl.dtsi
+++ /dev/null
@@ -1,90 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
- * Author: Alexandre Torgue <alexandre.torgue@st.com>
- */
-
-#include "stm32mp157-pinctrl.dtsi"
-/ {
-	soc {
-		pinctrl: pin-controller@50002000 {
-			st,package = <STM32MP_PKG_AA>;
-
-			gpioa: gpio@50002000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 0 16>;
-			};
-
-			gpiob: gpio@50003000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 16 16>;
-			};
-
-			gpioc: gpio@50004000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 32 16>;
-			};
-
-			gpiod: gpio@50005000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 48 16>;
-			};
-
-			gpioe: gpio@50006000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 64 16>;
-			};
-
-			gpiof: gpio@50007000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 80 16>;
-			};
-
-			gpiog: gpio@50008000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 96 16>;
-			};
-
-			gpioh: gpio@50009000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 112 16>;
-			};
-
-			gpioi: gpio@5000a000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 128 16>;
-			};
-
-			gpioj: gpio@5000b000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 144 16>;
-			};
-
-			gpiok: gpio@5000c000 {
-				status = "okay";
-				ngpios = <8>;
-				gpio-ranges = <&pinctrl 0 160 8>;
-			};
-		};
-
-		pinctrl_z: pin-controller-z@54004000 {
-			st,package = <STM32MP_PKG_AA>;
-
-			gpioz: gpio@54004000 {
-				status = "okay";
-				ngpios = <8>;
-				gpio-ranges = <&pinctrl_z 0 400 8>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/stm32mp157xab-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157xab-pinctrl.dtsi
deleted file mode 100644
index 961fa12a59c3..000000000000
--- a/arch/arm/boot/dts/stm32mp157xab-pinctrl.dtsi
+++ /dev/null
@@ -1,62 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
- * Author: Alexandre Torgue <alexandre.torgue@st.com>
- */
-
-#include "stm32mp157-pinctrl.dtsi"
-/ {
-	soc {
-		pinctrl: pin-controller@50002000 {
-			st,package = <STM32MP_PKG_AB>;
-
-			gpioa: gpio@50002000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 0 16>;
-			};
-
-			gpiob: gpio@50003000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 16 16>;
-			};
-
-			gpioc: gpio@50004000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 32 16>;
-			};
-
-			gpiod: gpio@50005000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 48 16>;
-			};
-
-			gpioe: gpio@50006000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 64 16>;
-			};
-
-			gpiof: gpio@50007000 {
-				status = "okay";
-				ngpios = <6>;
-				gpio-ranges = <&pinctrl 6 86 6>;
-			};
-
-			gpiog: gpio@50008000 {
-				status = "okay";
-				ngpios = <10>;
-				gpio-ranges = <&pinctrl 6 102 10>;
-			};
-
-			gpioh: gpio@50009000 {
-				status = "okay";
-				ngpios = <2>;
-				gpio-ranges = <&pinctrl 0 112 2>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/stm32mp157xac-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157xac-pinctrl.dtsi
deleted file mode 100644
index 26600f188d25..000000000000
--- a/arch/arm/boot/dts/stm32mp157xac-pinctrl.dtsi
+++ /dev/null
@@ -1,78 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
- * Author: Alexandre Torgue <alexandre.torgue@st.com>
- */
-
-#include "stm32mp157-pinctrl.dtsi"
-/ {
-	soc {
-		pinctrl: pin-controller@50002000 {
-			st,package = <STM32MP_PKG_AC>;
-
-			gpioa: gpio@50002000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 0 16>;
-			};
-
-			gpiob: gpio@50003000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 16 16>;
-			};
-
-			gpioc: gpio@50004000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 32 16>;
-			};
-
-			gpiod: gpio@50005000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 48 16>;
-			};
-
-			gpioe: gpio@50006000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 64 16>;
-			};
-
-			gpiof: gpio@50007000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 80 16>;
-			};
-
-			gpiog: gpio@50008000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 96 16>;
-			};
-
-			gpioh: gpio@50009000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 112 16>;
-			};
-
-			gpioi: gpio@5000a000 {
-				status = "okay";
-				ngpios = <12>;
-				gpio-ranges = <&pinctrl 0 128 12>;
-			};
-		};
-
-		pinctrl_z: pin-controller-z@54004000 {
-			st,package = <STM32MP_PKG_AC>;
-
-			gpioz: gpio@54004000 {
-				status = "okay";
-				ngpios = <8>;
-				gpio-ranges = <&pinctrl_z 0 400 8>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/stm32mp157xad-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157xad-pinctrl.dtsi
deleted file mode 100644
index 910113f3e69a..000000000000
--- a/arch/arm/boot/dts/stm32mp157xad-pinctrl.dtsi
+++ /dev/null
@@ -1,62 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
- * Author: Alexandre Torgue <alexandre.torgue@st.com>
- */
-
-#include "stm32mp157-pinctrl.dtsi"
-/ {
-	soc {
-		pinctrl: pin-controller@50002000 {
-			st,package = <STM32MP_PKG_AD>;
-
-			gpioa: gpio@50002000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 0 16>;
-			};
-
-			gpiob: gpio@50003000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 16 16>;
-			};
-
-			gpioc: gpio@50004000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 32 16>;
-			};
-
-			gpiod: gpio@50005000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 48 16>;
-			};
-
-			gpioe: gpio@50006000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 64 16>;
-			};
-
-			gpiof: gpio@50007000 {
-				status = "okay";
-				ngpios = <6>;
-				gpio-ranges = <&pinctrl 6 86 6>;
-			};
-
-			gpiog: gpio@50008000 {
-				status = "okay";
-				ngpios = <10>;
-				gpio-ranges = <&pinctrl 6 102 10>;
-			};
-
-			gpioh: gpio@50009000 {
-				status = "okay";
-				ngpios = <2>;
-				gpio-ranges = <&pinctrl 0 112 2>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/stm32mp15xc.dtsi b/arch/arm/boot/dts/stm32mp15xc.dtsi
new file mode 100644
index 000000000000..b06a55a2fa18
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp15xc.dtsi
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+/ {
+	soc {
+		cryp1: cryp@54001000 {
+			compatible = "st,stm32mp1-cryp";
+			reg = <0x54001000 0x400>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc CRYP1>;
+			resets = <&rcc CRYP1_R>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
new file mode 100644
index 000000000000..f6672e87aef3
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
@@ -0,0 +1,625 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/mfd/st,stpmic1.h>
+
+/ {
+	memory@c0000000 {
+		device_type = "memory";
+		reg = <0xc0000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		mcuram2: mcuram2@10000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10000000 0x40000>;
+			no-map;
+		};
+
+		vdev0vring0: vdev0vring0@10040000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10040000 0x1000>;
+			no-map;
+		};
+
+		vdev0vring1: vdev0vring1@10041000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10041000 0x1000>;
+			no-map;
+		};
+
+		vdev0buffer: vdev0buffer@10042000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10042000 0x4000>;
+			no-map;
+		};
+
+		mcuram: mcuram@30000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x30000000 0x40000>;
+			no-map;
+		};
+
+		retram: retram@38000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x38000000 0x10000>;
+			no-map;
+		};
+
+		gpu_reserved: gpu@d4000000 {
+			reg = <0xd4000000 0x4000000>;
+			no-map;
+		};
+	};
+
+	led {
+		compatible = "gpio-leds";
+		blue {
+			label = "heartbeat";
+			gpios = <&gpiod 11 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+	};
+
+	sound {
+		compatible = "audio-graph-card";
+		label = "STM32MP1-DK";
+		routing =
+			"Playback" , "MCLK",
+			"Capture" , "MCLK",
+			"MICL" , "Mic Bias";
+		dais = <&sai2a_port &sai2b_port &i2s2_port>;
+		status = "okay";
+	};
+};
+
+&adc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&adc12_ain_pins_a>, <&adc12_usb_cc_pins_a>;
+	vdd-supply = <&vdd>;
+	vdda-supply = <&vdd>;
+	vref-supply = <&vrefbuf>;
+	status = "disabled";
+	adc1: adc@0 {
+		/*
+		 * Type-C USB_PWR_CC1 & USB_PWR_CC2 on in18 & in19.
+		 * Use at least 5 * RC time, e.g. 5 * (Rp + Rd) * C:
+		 * 5 * (56 + 47kOhms) * 5pF => 2.5us.
+		 * Use arbitrary margin here (e.g. 5us).
+		 */
+		st,min-sample-time-nsecs = <5000>;
+		/* AIN connector, USB Type-C CC1 & CC2 */
+		st,adc-channels = <0 1 6 13 18 19>;
+		status = "okay";
+	};
+	adc2: adc@100 {
+		/* AIN connector, USB Type-C CC1 & CC2 */
+		st,adc-channels = <0 1 2 6 18 19>;
+		st,min-sample-time-nsecs = <5000>;
+		status = "okay";
+	};
+};
+
+&cec {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cec_pins_b>;
+	pinctrl-1 = <&cec_pins_sleep_b>;
+	status = "okay";
+};
+
+&ethernet0 {
+	status = "okay";
+	pinctrl-0 = <&ethernet0_rgmii_pins_a>;
+	pinctrl-1 = <&ethernet0_rgmii_pins_sleep_a>;
+	pinctrl-names = "default", "sleep";
+	phy-mode = "rgmii-id";
+	max-speed = <1000>;
+	phy-handle = <&phy0>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};
+
+&gpu {
+	contiguous-area = <&gpu_reserved>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c1_pins_a>;
+	pinctrl-1 = <&i2c1_pins_sleep_a>;
+	i2c-scl-rising-time-ns = <100>;
+	i2c-scl-falling-time-ns = <7>;
+	status = "okay";
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	hdmi-transmitter@39 {
+		compatible = "sil,sii9022";
+		reg = <0x39>;
+		iovcc-supply = <&v3v3_hdmi>;
+		cvcc12-supply = <&v1v2_hdmi>;
+		reset-gpios = <&gpioa 10 GPIO_ACTIVE_LOW>;
+		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-parent = <&gpiog>;
+		#sound-dai-cells = <0>;
+		status = "okay";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				sii9022_in: endpoint {
+					remote-endpoint = <&ltdc_ep0_out>;
+				};
+			};
+
+			port@3 {
+				reg = <3>;
+				sii9022_tx_endpoint: endpoint {
+					remote-endpoint = <&i2s2_endpoint>;
+				};
+			};
+		};
+	};
+
+	cs42l51: cs42l51@4a {
+		compatible = "cirrus,cs42l51";
+		reg = <0x4a>;
+		#sound-dai-cells = <0>;
+		VL-supply = <&v3v3>;
+		VD-supply = <&v1v8_audio>;
+		VA-supply = <&v1v8_audio>;
+		VAHP-supply = <&v1v8_audio>;
+		reset-gpios = <&gpiog 9 GPIO_ACTIVE_LOW>;
+		clocks = <&sai2a>;
+		clock-names = "MCLK";
+		status = "okay";
+
+		cs42l51_port: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cs42l51_tx_endpoint: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&sai2a_endpoint>;
+				frame-master;
+				bitclock-master;
+			};
+
+			cs42l51_rx_endpoint: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&sai2b_endpoint>;
+				frame-master;
+				bitclock-master;
+			};
+		};
+	};
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins_a>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	pmic: stpmic@33 {
+		compatible = "st,stpmic1";
+		reg = <0x33>;
+		interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		status = "okay";
+
+		regulators {
+			compatible = "st,stpmic1-regulators";
+			ldo1-supply = <&v3v3>;
+			ldo3-supply = <&vdd_ddr>;
+			ldo6-supply = <&v3v3>;
+			pwr_sw1-supply = <&bst_out>;
+			pwr_sw2-supply = <&bst_out>;
+
+			vddcore: buck1 {
+				regulator-name = "vddcore";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vdd_ddr: buck2 {
+				regulator-name = "vdd_ddr";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vdd: buck3 {
+				regulator-name = "vdd";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				st,mask-reset;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			v3v3: buck4 {
+				regulator-name = "v3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-over-current-protection;
+				regulator-initial-mode = <0>;
+			};
+
+			v1v8_audio: ldo1 {
+				regulator-name = "v1v8_audio";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				interrupts = <IT_CURLIM_LDO1 0>;
+			};
+
+			v3v3_hdmi: ldo2 {
+				regulator-name = "v3v3_hdmi";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				interrupts = <IT_CURLIM_LDO2 0>;
+			};
+
+			vtt_ddr: ldo3 {
+				regulator-name = "vtt_ddr";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <750000>;
+				regulator-always-on;
+				regulator-over-current-protection;
+			};
+
+			vdd_usb: ldo4 {
+				regulator-name = "vdd_usb";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				interrupts = <IT_CURLIM_LDO4 0>;
+			};
+
+			vdda: ldo5 {
+				regulator-name = "vdda";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <2900000>;
+				interrupts = <IT_CURLIM_LDO5 0>;
+				regulator-boot-on;
+			};
+
+			v1v2_hdmi: ldo6 {
+				regulator-name = "v1v2_hdmi";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				interrupts = <IT_CURLIM_LDO6 0>;
+			};
+
+			vref_ddr: vref_ddr {
+				regulator-name = "vref_ddr";
+				regulator-always-on;
+				regulator-over-current-protection;
+			};
+
+			 bst_out: boost {
+				regulator-name = "bst_out";
+				interrupts = <IT_OCP_BOOST 0>;
+			 };
+
+			vbus_otg: pwr_sw1 {
+				regulator-name = "vbus_otg";
+				interrupts = <IT_OCP_OTG 0>;
+			 };
+
+			 vbus_sw: pwr_sw2 {
+				regulator-name = "vbus_sw";
+				interrupts = <IT_OCP_SWOUT 0>;
+				regulator-active-discharge = <1>;
+			 };
+		};
+
+		onkey {
+			compatible = "st,stpmic1-onkey";
+			interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>;
+			interrupt-names = "onkey-falling", "onkey-rising";
+			power-off-time-sec = <10>;
+			status = "okay";
+		};
+
+		watchdog {
+			compatible = "st,stpmic1-wdt";
+			status = "disabled";
+		};
+	};
+};
+
+&i2s2 {
+	clocks = <&rcc SPI2>, <&rcc SPI2_K>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
+	clock-names = "pclk", "i2sclk", "x8k", "x11k";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2s2_pins_a>;
+	pinctrl-1 = <&i2s2_pins_sleep_a>;
+	status = "okay";
+
+	i2s2_port: port {
+		i2s2_endpoint: endpoint {
+			remote-endpoint = <&sii9022_tx_endpoint>;
+			format = "i2s";
+			mclk-fs = <256>;
+		};
+	};
+};
+
+&ipcc {
+	status = "okay";
+};
+
+&iwdg2 {
+	timeout-sec = <32>;
+	status = "okay";
+};
+
+&ltdc {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&ltdc_pins_a>;
+	pinctrl-1 = <&ltdc_pins_sleep_a>;
+	status = "okay";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ltdc_ep0_out: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&sii9022_in>;
+		};
+	};
+};
+
+&m4_rproc {
+	memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
+			<&vdev0vring1>, <&vdev0buffer>;
+	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
+	mbox-names = "vq0", "vq1", "shutdown";
+	interrupt-parent = <&exti>;
+	interrupts = <68 1>;
+	status = "okay";
+};
+
+&pwr_regulators {
+	vdd-supply = <&vdd>;
+	vdd_3v3_usbfs-supply = <&vdd_usb>;
+};
+
+&rng1 {
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sai2 {
+	clocks = <&rcc SAI2>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
+	clock-names = "pclk", "x8k", "x11k";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sai2a_pins_a>, <&sai2b_pins_b>;
+	pinctrl-1 = <&sai2a_sleep_pins_a>, <&sai2b_sleep_pins_b>;
+	status = "okay";
+
+	sai2a: audio-controller@4400b004 {
+		#clock-cells = <0>;
+		dma-names = "tx";
+		clocks = <&rcc SAI2_K>;
+		clock-names = "sai_ck";
+		status = "okay";
+
+		sai2a_port: port {
+			sai2a_endpoint: endpoint {
+				remote-endpoint = <&cs42l51_tx_endpoint>;
+				format = "i2s";
+				mclk-fs = <256>;
+				dai-tdm-slot-num = <2>;
+				dai-tdm-slot-width = <32>;
+			};
+		};
+	};
+
+	sai2b: audio-controller@4400b024 {
+		dma-names = "rx";
+		st,sync = <&sai2a 2>;
+		clocks = <&rcc SAI2_K>, <&sai2a>;
+		clock-names = "sai_ck", "MCLK";
+		status = "okay";
+
+		sai2b_port: port {
+			sai2b_endpoint: endpoint {
+				remote-endpoint = <&cs42l51_rx_endpoint>;
+				format = "i2s";
+				mclk-fs = <256>;
+				dai-tdm-slot-num = <2>;
+				dai-tdm-slot-width = <32>;
+			};
+		};
+	};
+};
+
+&sdmmc1 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+	broken-cd;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&v3v3>;
+	status = "okay";
+};
+
+&sdmmc3 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc3_b4_pins_a>;
+	pinctrl-1 = <&sdmmc3_b4_od_pins_a>;
+	pinctrl-2 = <&sdmmc3_b4_sleep_pins_a>;
+	broken-cd;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&v3v3>;
+	status = "disabled";
+};
+
+&timers1 {
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "disabled";
+	pwm {
+		pinctrl-0 = <&pwm1_pins_a>;
+		pinctrl-1 = <&pwm1_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+	timer@0 {
+		status = "okay";
+	};
+};
+
+&timers3 {
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "disabled";
+	pwm {
+		pinctrl-0 = <&pwm3_pins_a>;
+		pinctrl-1 = <&pwm3_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+	timer@2 {
+		status = "okay";
+	};
+};
+
+&timers4 {
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "disabled";
+	pwm {
+		pinctrl-0 = <&pwm4_pins_a &pwm4_pins_b>;
+		pinctrl-1 = <&pwm4_sleep_pins_a &pwm4_sleep_pins_b>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+	timer@3 {
+		status = "okay";
+	};
+};
+
+&timers5 {
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "disabled";
+	pwm {
+		pinctrl-0 = <&pwm5_pins_a>;
+		pinctrl-1 = <&pwm5_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+	timer@4 {
+		status = "okay";
+	};
+};
+
+&timers6 {
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "disabled";
+	timer@5 {
+		status = "okay";
+	};
+};
+
+&timers12 {
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "disabled";
+	pwm {
+		pinctrl-0 = <&pwm12_pins_a>;
+		pinctrl-1 = <&pwm12_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+	timer@11 {
+		status = "okay";
+	};
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins_a>;
+	status = "okay";
+};
+
+&usbh_ehci {
+	phys = <&usbphyc_port0>;
+	status = "okay";
+};
+
+&usbotg_hs {
+	dr_mode = "peripheral";
+	phys = <&usbphyc_port1 0>;
+	phy-names = "usb2-phy";
+	status = "okay";
+};
+
+&usbphyc {
+	status = "okay";
+};
+
+&usbphyc_port0 {
+	phy-supply = <&vdd_usb>;
+	vdda1v1-supply = <&reg11>;
+	vdda1v8-supply = <&reg18>;
+};
+
+&usbphyc_port1 {
+	phy-supply = <&vdd_usb>;
+	vdda1v1-supply = <&reg11>;
+	vdda1v8-supply = <&reg18>;
+};
+
+&vrefbuf {
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	vdda-supply = <&vdd>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/stm32mp15xxaa-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15xxaa-pinctrl.dtsi
new file mode 100644
index 000000000000..04f7a43ad66f
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp15xxaa-pinctrl.dtsi
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+&pinctrl {
+	st,package = <STM32MP_PKG_AA>;
+
+	gpioa: gpio@50002000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 0 16>;
+	};
+
+	gpiob: gpio@50003000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 16 16>;
+	};
+
+	gpioc: gpio@50004000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 32 16>;
+	};
+
+	gpiod: gpio@50005000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 48 16>;
+	};
+
+	gpioe: gpio@50006000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 64 16>;
+	};
+
+	gpiof: gpio@50007000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 80 16>;
+	};
+
+	gpiog: gpio@50008000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 96 16>;
+	};
+
+	gpioh: gpio@50009000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 112 16>;
+	};
+
+	gpioi: gpio@5000a000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 128 16>;
+	};
+
+	gpioj: gpio@5000b000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 144 16>;
+	};
+
+	gpiok: gpio@5000c000 {
+		status = "okay";
+		ngpios = <8>;
+		gpio-ranges = <&pinctrl 0 160 8>;
+	};
+};
+
+&pinctrl_z {
+	st,package = <STM32MP_PKG_AA>;
+
+	gpioz: gpio@54004000 {
+		status = "okay";
+		ngpios = <8>;
+		gpio-ranges = <&pinctrl_z 0 400 8>;
+	};
+};
diff --git a/arch/arm/boot/dts/stm32mp15xxab-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15xxab-pinctrl.dtsi
new file mode 100644
index 000000000000..328dad140e9b
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp15xxab-pinctrl.dtsi
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+&pinctrl {
+	st,package = <STM32MP_PKG_AB>;
+
+	gpioa: gpio@50002000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 0 16>;
+	};
+
+	gpiob: gpio@50003000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 16 16>;
+	};
+
+	gpioc: gpio@50004000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 32 16>;
+	};
+
+	gpiod: gpio@50005000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 48 16>;
+	};
+
+	gpioe: gpio@50006000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 64 16>;
+	};
+
+	gpiof: gpio@50007000 {
+		status = "okay";
+		ngpios = <6>;
+		gpio-ranges = <&pinctrl 6 86 6>;
+	};
+
+	gpiog: gpio@50008000 {
+		status = "okay";
+		ngpios = <10>;
+		gpio-ranges = <&pinctrl 6 102 10>;
+	};
+
+	gpioh: gpio@50009000 {
+		status = "okay";
+		ngpios = <2>;
+		gpio-ranges = <&pinctrl 0 112 2>;
+	};
+};
diff --git a/arch/arm/boot/dts/stm32mp15xxac-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15xxac-pinctrl.dtsi
new file mode 100644
index 000000000000..7eaa245f44db
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp15xxac-pinctrl.dtsi
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+&pinctrl {
+	st,package = <STM32MP_PKG_AC>;
+
+	gpioa: gpio@50002000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 0 16>;
+	};
+
+	gpiob: gpio@50003000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 16 16>;
+	};
+
+	gpioc: gpio@50004000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 32 16>;
+	};
+
+	gpiod: gpio@50005000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 48 16>;
+	};
+
+	gpioe: gpio@50006000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 64 16>;
+	};
+
+	gpiof: gpio@50007000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 80 16>;
+	};
+
+	gpiog: gpio@50008000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 96 16>;
+	};
+
+	gpioh: gpio@50009000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 112 16>;
+	};
+
+	gpioi: gpio@5000a000 {
+		status = "okay";
+		ngpios = <12>;
+		gpio-ranges = <&pinctrl 0 128 12>;
+	};
+};
+
+&pinctrl_z {
+	st,package = <STM32MP_PKG_AC>;
+
+	gpioz: gpio@54004000 {
+		status = "okay";
+		ngpios = <8>;
+		gpio-ranges = <&pinctrl_z 0 400 8>;
+	};
+};
diff --git a/arch/arm/boot/dts/stm32mp15xxad-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15xxad-pinctrl.dtsi
new file mode 100644
index 000000000000..b63e207de216
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp15xxad-pinctrl.dtsi
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+&pinctrl {
+	st,package = <STM32MP_PKG_AD>;
+
+	gpioa: gpio@50002000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 0 16>;
+	};
+
+	gpiob: gpio@50003000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 16 16>;
+	};
+
+	gpioc: gpio@50004000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 32 16>;
+	};
+
+	gpiod: gpio@50005000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 48 16>;
+	};
+
+	gpioe: gpio@50006000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 64 16>;
+	};
+
+	gpiof: gpio@50007000 {
+		status = "okay";
+		ngpios = <6>;
+		gpio-ranges = <&pinctrl 6 86 6>;
+	};
+
+	gpiog: gpio@50008000 {
+		status = "okay";
+		ngpios = <10>;
+		gpio-ranges = <&pinctrl 6 102 10>;
+	};
+
+	gpioh: gpio@50009000 {
+		status = "okay";
+		ngpios = <2>;
+		gpio-ranges = <&pinctrl 0 112 2>;
+	};
+};
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index 4c268b70b735..bf531efc0610 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -624,6 +624,16 @@
 			status = "disabled";
 		};
 
+		csi1: csi@1c1d000 {
+			compatible = "allwinner,sun4i-a10-csi1";
+			reg = <0x01c1d000 0x1000>;
+			interrupts = <43>;
+			clocks = <&ccu CLK_AHB_CSI1>, <&ccu CLK_DRAM_CSI1>;
+			clock-names = "bus", "ram";
+			resets = <&ccu RST_CSI1>;
+			status = "disabled";
+		};
+
 		spi3: spi@1c1f000 {
 			compatible = "allwinner,sun4i-a10-spi";
 			reg = <0x01c1f000 0x1000>;
@@ -670,6 +680,31 @@
 				function = "can";
 			};
 
+			/omit-if-no-ref/
+			csi1_8bits_pg_pins: csi1-8bits-pg-pins {
+				pins = "PG0", "PG2", "PG3", "PG4", "PG5",
+				       "PG6", "PG7", "PG8", "PG9", "PG10",
+				       "PG11";
+				function = "csi1";
+			};
+
+			/omit-if-no-ref/
+			csi1_24bits_ph_pins: csi1-24bits-ph-pins {
+				pins = "PH0", "PH1", "PH2", "PH3", "PH4",
+				       "PH5", "PH6", "PH7", "PH8", "PH9",
+				       "PH10", "PH11", "PH12", "PH13", "PH14",
+				       "PH15", "PH16", "PH17", "PH18", "PH19",
+				       "PH20", "PH21", "PH22", "PH23", "PH24",
+				       "PH25", "PH26", "PH27";
+				function = "csi1";
+			};
+
+			/omit-if-no-ref/
+			csi1_clk_pg_pin: csi1-clk-pg-pin {
+				pins = "PG1";
+				function = "csi1";
+			};
+
 			emac_pins: emac0-pins {
 				pins = "PA0", "PA1", "PA2",
 				       "PA3", "PA4", "PA5", "PA6",
diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi
index 6befa236ba99..0b526e6e5a95 100644
--- a/arch/arm/boot/dts/sun5i.dtsi
+++ b/arch/arm/boot/dts/sun5i.dtsi
@@ -185,7 +185,7 @@
 		mbus: dram-controller@1c01000 {
 			compatible = "allwinner,sun5i-a13-mbus";
 			reg = <0x01c01000 0x1000>;
-			clocks = <&ccu 99>;
+			clocks = <&ccu CLK_MBUS>;
 			dma-ranges = <0x00000000 0x40000000 0x20000000>;
 			#interconnect-cells = <1>;
 		};
@@ -275,6 +275,7 @@
 			compatible = "allwinner,sun5i-a13-tcon";
 			reg = <0x01c0c000 0x1000>;
 			interrupts = <44>;
+			dmas = <&dma SUN4I_DMA_DEDICATED 14>;
 			resets = <&ccu RST_LCD>;
 			reset-names = "lcd";
 			clocks = <&ccu CLK_AHB_LCD>,
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index 2cf34ae1c17b..7762fbd9a133 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -285,14 +285,19 @@
 			compatible = "allwinner,sun6i-a31-tcon";
 			reg = <0x01c0c000 0x1000>;
 			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-			resets = <&ccu RST_AHB1_LCD0>;
-			reset-names = "lcd";
+			dmas = <&dma 11>;
+			resets = <&ccu RST_AHB1_LCD0>,
+				 <&ccu RST_AHB1_LVDS>;
+			reset-names = "lcd",
+				      "lvds";
 			clocks = <&ccu CLK_AHB1_LCD0>,
 				 <&ccu CLK_LCD0_CH0>,
-				 <&ccu CLK_LCD0_CH1>;
+				 <&ccu CLK_LCD0_CH1>,
+				 <&ccu 15>;
 			clock-names = "ahb",
 				      "tcon-ch0",
-				      "tcon-ch1";
+				      "tcon-ch1",
+				      "lvds-alt";
 			clock-output-names = "tcon0-pixel-clock";
 			#clock-cells = <0>;
 
@@ -334,14 +339,18 @@
 			compatible = "allwinner,sun6i-a31-tcon";
 			reg = <0x01c0d000 0x1000>;
 			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
-			resets = <&ccu RST_AHB1_LCD1>;
-			reset-names = "lcd";
+			dmas = <&dma 12>;
+			resets = <&ccu RST_AHB1_LCD1>,
+				 <&ccu RST_AHB1_LVDS>;
+			reset-names = "lcd", "lvds";
 			clocks = <&ccu CLK_AHB1_LCD1>,
 				 <&ccu CLK_LCD1_CH0>,
-				 <&ccu CLK_LCD1_CH1>;
+				 <&ccu CLK_LCD1_CH1>,
+				 <&ccu 15>;
 			clock-names = "ahb",
 				      "tcon-ch0",
-				      "tcon-ch1";
+				      "tcon-ch1",
+				      "lvds-alt";
 			clock-output-names = "tcon1-pixel-clock";
 			#clock-cells = <0>;
 
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 8aebefd6accf..92b5be97085d 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -729,6 +729,17 @@
 			status = "disabled";
 		};
 
+		csi1: csi@1c1d000 {
+			compatible = "allwinner,sun7i-a20-csi1",
+				     "allwinner,sun4i-a10-csi1";
+			reg = <0x01c1d000 0x1000>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_CSI1>, <&ccu CLK_DRAM_CSI1>;
+			clock-names = "bus", "ram";
+			resets = <&ccu RST_CSI1>;
+			status = "disabled";
+		};
+
 		spi3: spi@1c1f000 {
 			compatible = "allwinner,sun4i-a10-spi";
 			reg = <0x01c1f000 0x1000>;
@@ -803,6 +814,31 @@
 			};
 
 			/omit-if-no-ref/
+			csi1_8bits_pg_pins: csi1-8bits-pg-pins {
+				pins = "PG0", "PG2", "PG3", "PG4", "PG5",
+				       "PG6", "PG7", "PG8", "PG9", "PG10",
+				       "PG11";
+				function = "csi1";
+			};
+
+			/omit-if-no-ref/
+			csi1_24bits_ph_pins: csi1-24bits-ph-pins {
+				pins = "PH0", "PH1", "PH2", "PH3", "PH4",
+				       "PH5", "PH6", "PH7", "PH8", "PH9",
+				       "PH10", "PH11", "PH12", "PH13", "PH14",
+				       "PH15", "PH16", "PH17", "PH18", "PH19",
+				       "PH20", "PH21", "PH22", "PH23", "PH24",
+				       "PH25", "PH26", "PH27";
+				function = "csi1";
+			};
+
+			/omit-if-no-ref/
+			csi1_clk_pg_pin: csi1-clk-pg-pin {
+				pins = "PG1";
+				function = "csi1";
+			};
+
+			/omit-if-no-ref/
 			emac_pa_pins: emac-pa-pins {
 				pins = "PA0", "PA1", "PA2",
 				       "PA3", "PA4", "PA5", "PA6",
diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
index f292f96ab39b..48487f6d4ab9 100644
--- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
@@ -182,14 +182,19 @@
 			/* compatible gets set in SoC specific dtsi file */
 			reg = <0x01c0c000 0x1000>;
 			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dma 12>;
 			clocks = <&ccu CLK_BUS_LCD>,
-				 <&ccu CLK_LCD_CH0>;
+				 <&ccu CLK_LCD_CH0>,
+				 <&ccu 13>;
 			clock-names = "ahb",
-				      "tcon-ch0";
+				      "tcon-ch0",
+				      "lvds-alt";
 			clock-output-names = "tcon-pixel-clock";
 			#clock-cells = <0>;
-			resets = <&ccu RST_BUS_LCD>;
-			reset-names = "lcd";
+			resets = <&ccu RST_BUS_LCD>,
+				 <&ccu RST_BUS_LVDS>;
+			reset-names = "lcd",
+				      "lvds";
 			status = "disabled";
 
 			ports {
diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
index 53c38deb8a08..74ac7ee9383c 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -50,6 +50,7 @@
 #include <dt-bindings/reset/sun8i-a83t-ccu.h>
 #include <dt-bindings/reset/sun8i-de2.h>
 #include <dt-bindings/reset/sun8i-r-ccu.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	interrupt-parent = <&gic>;
@@ -581,6 +582,12 @@
 		sid: eeprom@1c14000 {
 			compatible = "allwinner,sun8i-a83t-sid";
 			reg = <0x1c14000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ths_calibration: thermal-sensor-calibration@34 {
+				reg = <0x34 8>;
+			};
 		};
 
 		crypto: crypto@1c15000 {
@@ -999,9 +1006,9 @@
 			reg = <0x01c30000 0x104>;
 			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "macirq";
-			resets = <&ccu 13>;
+			resets = <&ccu CLK_BUS_EMAC>;
 			reset-names = "stmmaceth";
-			clocks = <&ccu 27>;
+			clocks = <&ccu RST_BUS_EMAC>;
 			clock-names = "stmmaceth";
 			status = "disabled";
 
@@ -1095,7 +1102,7 @@
 			compatible = "allwinner,sun8i-a83t-r-ccu";
 			reg = <0x01f01400 0x400>;
 			clocks = <&osc24M>, <&osc16Md512>, <&osc16M>,
-				 <&ccu 6>;
+				 <&ccu CLK_PLL_PERIPH>;
 			clock-names = "hosc", "losc", "iosc", "pll-periph";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
@@ -1165,5 +1172,34 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};
+
+		ths: thermal-sensor@1f04000 {
+			compatible = "allwinner,sun8i-a83t-ths";
+			reg = <0x01f04000 0x100>;
+			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			nvmem-cells = <&ths_calibration>;
+			nvmem-cell-names = "calibration";
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	thermal-zones {
+		cpu0_thermal: cpu0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 0>;
+		};
+
+		cpu1_thermal: cpu1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 1>;
+		};
+
+		gpu_thermal: gpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 2>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
index ac9e26b1d906..45a24441ff18 100644
--- a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
+++ b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
@@ -143,6 +143,7 @@
 };
 
 &ir {
+	linux,rc-map-name = "rc-tanix-tx3mini";
 	pinctrl-names = "default";
 	pinctrl-0 = <&r_ir_rx_pin>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun8i-h3-emlid-neutis-n5h3-devboard.dts b/arch/arm/boot/dts/sun8i-h3-emlid-neutis-n5h3-devboard.dts
new file mode 100644
index 000000000000..02fbe00cde97
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-h3-emlid-neutis-n5h3-devboard.dts
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * DTS for Emlid Neutis N5 Dev board.
+ *
+ * Copyright (C) 2019 Georgii Staroselskii <georgiii.staroselskii@emlid.com>
+ */
+
+/dts-v1/;
+
+#include "sun8i-h3-emlid-neutis-n5h3.dtsi"
+
+/ {
+	model = "Emlid Neutis N5H3 Developer board";
+	compatible = "emlid,neutis-n5h3-devboard",
+		     "emlid,neutis-n5h3",
+		     "allwinner,sun8i-h3";
+
+	vdd_cpux: gpio-regulator {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-cpux";
+		regulator-type = "voltage";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-ramp-delay = <50>; /* 4ms */
+		gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+		gpios-states = <0x1>;
+		states = <1100000 0x0>, <1300000 0x1>;
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpux>;
+};
+
+&codec {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	allwinner,leds-active-low;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-h3-emlid-neutis-n5h3.dtsi b/arch/arm/boot/dts/sun8i-h3-emlid-neutis-n5h3.dtsi
new file mode 100644
index 000000000000..eedd5da5dc2f
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-h3-emlid-neutis-n5h3.dtsi
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * DTSI for Emlid Neutis N5 SoM.
+ *
+ * Copyright (C) 2019 Georgii Staroselskii <georgii.staroselskii@emlid.com>
+ */
+
+/dts-v1/;
+
+#include "sun8i-h3.dtsi"
+#include <arm/sunxi-h3-h5-emlid-neutis.dtsi>
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts
index c73f59900975..6b149271ef13 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts
@@ -60,8 +60,7 @@
 		enable-gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
 		gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
 		gpios-states = <0x1>;
-		states = <1100000 0x0
-			  1300000 0x1>;
+		states = <1100000 0>, <1300000 1>;
 	};
 
 	reg_vcc_dram: vcc-dram {
diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
index fe773c72a69b..20217e2ca4d3 100644
--- a/arch/arm/boot/dts/sun8i-h3.dtsi
+++ b/arch/arm/boot/dts/sun8i-h3.dtsi
@@ -80,7 +80,7 @@
 			#cooling-cells = <2>;
 		};
 
-		cpu@1 {
+		cpu1: cpu@1 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <1>;
@@ -90,7 +90,7 @@
 			#cooling-cells = <2>;
 		};
 
-		cpu@2 {
+		cpu2: cpu@2 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <2>;
@@ -100,7 +100,7 @@
 			#cooling-cells = <2>;
 		};
 
-		cpu@3 {
+		cpu3: cpu@3 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <3>;
@@ -111,6 +111,15 @@
 		};
 	};
 
+	pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
 	timer {
 		compatible = "arm,armv7-timer";
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
@@ -199,6 +208,26 @@
 			assigned-clocks = <&ccu CLK_GPU>;
 			assigned-clock-rates = <384000000>;
 		};
+
+		ths: thermal-sensor@1c25000 {
+			compatible = "allwinner,sun8i-h3-ths";
+			reg = <0x01c25000 0x400>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&ccu RST_BUS_THS>;
+			clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>;
+			clock-names = "bus", "mod";
+			nvmem-cells = <&ths_calibration>;
+			nvmem-cell-names = "calibration";
+			#thermal-sensor-cells = <0>;
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 0>;
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi
index 421dfbbfd7ee..8f09a24b36ec 100644
--- a/arch/arm/boot/dts/sun8i-r40.dtsi
+++ b/arch/arm/boot/dts/sun8i-r40.dtsi
@@ -44,6 +44,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/sun8i-de2.h>
 #include <dt-bindings/clock/sun8i-r40-ccu.h>
+#include <dt-bindings/clock/sun8i-tcon-top.h>
 #include <dt-bindings/reset/sun8i-r40-ccu.h>
 #include <dt-bindings/reset/sun8i-de2.h>
 
@@ -78,25 +79,25 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu@0 {
+		cpu0: cpu@0 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <0>;
 		};
 
-		cpu@1 {
+		cpu1: cpu@1 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <1>;
 		};
 
-		cpu@2 {
+		cpu2: cpu@2 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <2>;
 		};
 
-		cpu@3 {
+		cpu3: cpu@3 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <3>;
@@ -180,6 +181,20 @@
 			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		csi0: csi@1c09000 {
+			compatible = "allwinner,sun8i-r40-csi0",
+				     "allwinner,sun7i-a20-csi0";
+			reg = <0x01c09000 0x1000>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CSI0>, <&ccu CLK_CSI_SCLK>,
+				 <&ccu CLK_DRAM_CSI0>;
+			clock-names = "bus", "isp", "ram";
+			resets = <&ccu RST_BUS_CSI0>;
+			interconnects = <&mbus 5>;
+			interconnect-names = "dma-mem";
+			status = "disabled";
+		};
+
 		mmc0: mmc@1c0f000 {
 			compatible = "allwinner,sun8i-r40-mmc",
 				     "allwinner,sun50i-a64-mmc";
@@ -355,6 +370,20 @@
 				function = "clk_out_a";
 			};
 
+			/omit-if-no-ref/
+			csi0_8bits_pins: csi0-8bits-pins {
+				pins = "PE0", "PE2", "PE3", "PE4", "PE5",
+				       "PE6", "PE7", "PE8", "PE9", "PE10",
+				       "PE11";
+				function = "csi0";
+			};
+
+			/omit-if-no-ref/
+			csi0_mclk_pin: csi0-mclk-pin {
+				pins = "PE1";
+				function = "csi0";
+			};
+
 			gmac_rgmii_pins: gmac-rgmii-pins {
 				pins = "PA0", "PA1", "PA2", "PA3",
 				       "PA4", "PA5", "PA6", "PA7",
@@ -373,6 +402,26 @@
 				function = "i2c0";
 			};
 
+			i2c1_pins: i2c1-pins {
+				pins = "PB18", "PB19";
+				function = "i2c1";
+			};
+
+			i2c2_pins: i2c2-pins {
+				pins = "PB20", "PB21";
+				function = "i2c2";
+			};
+
+			i2c3_pins: i2c3-pins {
+				pins = "PI0", "PI1";
+				function = "i2c3";
+			};
+
+			i2c4_pins: i2c4-pins {
+				pins = "PI2", "PI3";
+				function = "i2c4";
+			};
+
 			mmc0_pins: mmc0-pins {
 				pins = "PF0", "PF1", "PF2",
 				       "PF3", "PF4", "PF5";
@@ -398,6 +447,36 @@
 				bias-pull-up;
 			};
 
+			/omit-if-no-ref/
+			spi0_pc_pins: spi0-pc-pins {
+				pins = "PC0", "PC1", "PC2";
+				function = "spi0";
+			};
+
+			/omit-if-no-ref/
+			spi0_cs0_pc_pin: spi0-cs0-pc-pin {
+				pins = "PC23";
+				function = "spi0";
+			};
+
+			/omit-if-no-ref/
+			spi1_pi_pins: spi1-pi-pins {
+				pins = "PI17", "PI18", "PI19";
+				function = "spi1";
+			};
+
+			/omit-if-no-ref/
+			spi1_cs0_pi_pin: spi1-cs0-pi-pin {
+				pins = "PI16";
+				function = "spi1";
+			};
+
+			/omit-if-no-ref/
+			spi1_cs1_pi_pin: spi1-cs1-pi-pin {
+				pins = "PI15";
+				function = "spi1";
+			};
+
 			uart0_pb_pins: uart0-pb-pins {
 				pins = "PB22", "PB23";
 				function = "uart0";
@@ -528,6 +607,8 @@
 			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_I2C1>;
 			resets = <&ccu RST_BUS_I2C1>;
+			pinctrl-0 = <&i2c1_pins>;
+			pinctrl-names = "default";
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -539,6 +620,8 @@
 			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_I2C2>;
 			resets = <&ccu RST_BUS_I2C2>;
+			pinctrl-0 = <&i2c2_pins>;
+			pinctrl-names = "default";
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -550,6 +633,8 @@
 			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_I2C3>;
 			resets = <&ccu RST_BUS_I2C3>;
+			pinctrl-0 = <&i2c3_pins>;
+			pinctrl-names = "default";
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -561,6 +646,60 @@
 			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_I2C4>;
 			resets = <&ccu RST_BUS_I2C4>;
+			pinctrl-0 = <&i2c4_pins>;
+			pinctrl-names = "default";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi0: spi@1c05000 {
+			compatible = "allwinner,sun8i-r40-spi",
+				     "allwinner,sun8i-h3-spi";
+			reg = <0x01c05000 0x1000>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_SPI0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@1c06000 {
+			compatible = "allwinner,sun8i-r40-spi",
+				     "allwinner,sun8i-h3-spi";
+			reg = <0x01c06000 0x1000>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_SPI1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi2: spi@1c07000 {
+			compatible = "allwinner,sun8i-r40-spi",
+				     "allwinner,sun8i-h3-spi";
+			reg = <0x01c07000 0x1000>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI2>, <&ccu CLK_SPI2>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_SPI2>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi3: spi@1c0f000 {
+			compatible = "allwinner,sun8i-r40-spi",
+				     "allwinner,sun8i-h3-spi";
+			reg = <0x01c0f000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI3>, <&ccu CLK_SPI3>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_SPI3>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -596,6 +735,14 @@
 			};
 		};
 
+		mbus: dram-controller@1c62000 {
+			compatible = "allwinner,sun8i-r40-mbus";
+			reg = <0x01c62000 0x1000>;
+			clocks = <&ccu 155>;
+			dma-ranges = <0x00000000 0x40000000 0x80000000>;
+			#interconnect-cells = <1>;
+		};
+
 		tcon_top: tcon-top@1c70000 {
 			compatible = "allwinner,sun8i-r40-tcon-top";
 			reg = <0x01c70000 0x1000>;
@@ -718,7 +865,7 @@
 			compatible = "allwinner,sun8i-r40-tcon-tv";
 			reg = <0x01c73000 0x1000>;
 			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ccu CLK_BUS_TCON_TV0>, <&tcon_top 0>;
+			clocks = <&ccu CLK_BUS_TCON_TV0>, <&tcon_top CLK_TCON_TOP_TV0>;
 			clock-names = "ahb", "tcon-ch1";
 			resets = <&ccu RST_BUS_TCON_TV0>;
 			reset-names = "lcd";
@@ -761,7 +908,7 @@
 			compatible = "allwinner,sun8i-r40-tcon-tv";
 			reg = <0x01c74000 0x1000>;
 			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ccu CLK_BUS_TCON_TV1>, <&tcon_top 1>;
+			clocks = <&ccu CLK_BUS_TCON_TV1>, <&tcon_top CLK_TCON_TOP_TV1>;
 			clock-names = "ahb", "tcon-ch1";
 			resets = <&ccu RST_BUS_TCON_TV1>;
 			reset-names = "lcd";
@@ -803,7 +950,7 @@
 		gic: interrupt-controller@1c81000 {
 			compatible = "arm,gic-400";
 			reg = <0x01c81000 0x1000>,
-			      <0x01c82000 0x1000>,
+			      <0x01c82000 0x2000>,
 			      <0x01c84000 0x2000>,
 			      <0x01c86000 0x2000>;
 			interrupt-controller;
@@ -848,7 +995,7 @@
 			compatible = "allwinner,sun8i-r40-hdmi-phy";
 			reg = <0x01ef0000 0x10000>;
 			clocks = <&ccu CLK_BUS_HDMI1>, <&ccu CLK_HDMI_SLOW>,
-				 <&ccu 7>, <&ccu 16>;
+				 <&ccu CLK_PLL_VIDEO0>, <&ccu CLK_PLL_VIDEO1>;
 			clock-names = "bus", "mod", "pll-0", "pll-1";
 			resets = <&ccu RST_BUS_HDMI0>;
 			reset-names = "phy";
@@ -856,6 +1003,15 @@
 		};
 	};
 
+	pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
 	timer {
 		compatible = "arm,armv7-timer";
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi
index 23ba56df38f7..81ea50838cd5 100644
--- a/arch/arm/boot/dts/sun8i-v3s.dtsi
+++ b/arch/arm/boot/dts/sun8i-v3s.dtsi
@@ -123,8 +123,6 @@
 			clock-names = "bus",
 				      "mod";
 			resets = <&display_clocks 0>;
-			assigned-clocks = <&display_clocks 6>;
-			assigned-clock-rates = <150000000>;
 
 			ports {
 				#address-cells = <1>;
diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi
index 1d900f591d5f..ce4fa6706d06 100644
--- a/arch/arm/boot/dts/sun9i-a80.dtsi
+++ b/arch/arm/boot/dts/sun9i-a80.dtsi
@@ -387,16 +387,16 @@
 		usbphy2: phy@a01800 {
 			compatible = "allwinner,sun9i-a80-usb-phy";
 			reg = <0x00a01800 0x4>;
-			clocks = <&usb_clocks CLK_USB1_HSIC>,
+			clocks = <&usb_clocks CLK_USB1_PHY>,
 				 <&usb_clocks CLK_USB_HSIC>,
-				 <&usb_clocks CLK_USB1_PHY>;
-			clock-names = "hsic_480M",
+				 <&usb_clocks CLK_USB1_HSIC>;
+			clock-names = "phy",
 				      "hsic_12M",
-				      "phy";
-			resets = <&usb_clocks RST_USB1_HSIC>,
-				 <&usb_clocks RST_USB1_PHY>;
-			reset-names = "hsic",
-				      "phy";
+				      "hsic_480M";
+			resets = <&usb_clocks RST_USB1_PHY>,
+				 <&usb_clocks RST_USB1_HSIC>;
+			reset-names = "phy",
+				      "hsic";
 			status = "disabled";
 			#phy-cells = <0>;
 			/* usb1 is always used with HSIC */
@@ -429,16 +429,16 @@
 		usbphy3: phy@a02800 {
 			compatible = "allwinner,sun9i-a80-usb-phy";
 			reg = <0x00a02800 0x4>;
-			clocks = <&usb_clocks CLK_USB2_HSIC>,
+			clocks = <&usb_clocks CLK_USB2_PHY>,
 				 <&usb_clocks CLK_USB_HSIC>,
-				 <&usb_clocks CLK_USB2_PHY>;
-			clock-names = "hsic_480M",
+				 <&usb_clocks CLK_USB2_HSIC>;
+			clock-names = "phy",
 				      "hsic_12M",
-				      "phy";
-			resets = <&usb_clocks RST_USB2_HSIC>,
-				 <&usb_clocks RST_USB2_PHY>;
-			reset-names = "hsic",
-				      "phy";
+				      "hsic_480M";
+			resets = <&usb_clocks RST_USB2_PHY>,
+				 <&usb_clocks RST_USB2_HSIC>;
+			reset-names = "phy",
+				      "hsic";
 			status = "disabled";
 			#phy-cells = <0>;
 		};
@@ -530,9 +530,7 @@
 			compatible = "allwinner,sun9i-a80-mmc-config-clk";
 			reg = <0x01c13000 0x10>;
 			clocks = <&ccu CLK_BUS_MMC>;
-			clock-names = "ahb";
 			resets = <&ccu RST_BUS_MMC>;
-			reset-names = "ahb";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			clock-output-names = "mmc0_config", "mmc1_config",
@@ -880,8 +878,12 @@
 			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_LCD0>, <&ccu CLK_LCD0>;
 			clock-names = "ahb", "tcon-ch0";
-			resets = <&ccu RST_BUS_LCD0>, <&ccu RST_BUS_EDP>;
-			reset-names = "lcd", "edp";
+			resets = <&ccu RST_BUS_LCD0>,
+				 <&ccu RST_BUS_EDP>,
+				 <&ccu RST_BUS_LVDS>;
+			reset-names = "lcd",
+				      "edp",
+				      "lvds";
 			clock-output-names = "tcon0-pixel-clock";
 			#clock-cells = <0>;
 
diff --git a/arch/arm/boot/dts/sunxi-h3-h5-emlid-neutis.dtsi b/arch/arm/boot/dts/sunxi-h3-h5-emlid-neutis.dtsi
new file mode 100644
index 000000000000..fc67e30fe212
--- /dev/null
+++ b/arch/arm/boot/dts/sunxi-h3-h5-emlid-neutis.dtsi
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * DTSI for Emlid Neutis SoMs.
+ *
+ * Copyright (C) 2019 Georgii Staroselskii <georgii.staroselskii@emlid.com>
+ */
+
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 2 7 GPIO_ACTIVE_LOW>; /* PC7 */
+		post-power-on-delay-ms = <200>;
+		clocks = <&rtc 1>;
+		clock-names = "ext_clock";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpux>;
+};
+
+&reg_usb0_vbus {
+	gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>;   /* PL9 */
+	status = "okay";
+};
+
+
+&de {
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 5 IRQ_TYPE_LEVEL_LOW>;	/* PL5 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rtc 1>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_vcc3v3>;
+		vddio-supply = <&reg_vcc3v3>;
+		shutdown-gpios = <&pio 2 4 GPIO_ACTIVE_HIGH>; /* PC4 */
+		device-wakeup-gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&codec {
+	allwinner,audio-routing =
+		"Line Out", "LINEOUT",
+		"LINEIN", "Line In",
+		"MIC1", "Mic",
+		"MIC2", "Mic",
+		"Mic",  "MBIAS";
+};
+
+&i2c0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
index 0afea59486c2..5e9c3060aa08 100644
--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
@@ -231,6 +231,12 @@
 		sid: eeprom@1c14000 {
 			/* compatible is in per SoC .dtsi file */
 			reg = <0x1c14000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ths_calibration: thermal-sensor-calibration@34 {
+				reg = <0x34 4>;
+			};
 		};
 
 		usb_otg: usb@1c19000 {
@@ -553,7 +559,7 @@
 		mbus: dram-controller@1c62000 {
 			compatible = "allwinner,sun8i-h3-mbus";
 			reg = <0x01c62000 0x1000>;
-			clocks = <&ccu 113>;
+			clocks = <&ccu CLK_MBUS>;
 			dma-ranges = <0x00000000 0x40000000 0xc0000000>;
 			#interconnect-cells = <1>;
 		};
@@ -811,7 +817,7 @@
 			compatible = "allwinner,sun8i-h3-hdmi-phy";
 			reg = <0x01ef0000 0x10000>;
 			clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
-				 <&ccu 6>;
+				 <&ccu CLK_PLL_VIDEO>;
 			clock-names = "bus", "mod", "pll-0";
 			resets = <&ccu RST_BUS_HDMI0>;
 			reset-names = "phy";
@@ -831,7 +837,8 @@
 		r_ccu: clock@1f01400 {
 			compatible = "allwinner,sun8i-h3-r-ccu";
 			reg = <0x01f01400 0x100>;
-			clocks = <&osc24M>, <&rtc 0>, <&rtc 2>, <&ccu 9>;
+			clocks = <&osc24M>, <&rtc 0>, <&rtc 2>,
+				 <&ccu CLK_PLL_PERIPH0>;
 			clock-names = "hosc", "losc", "iosc", "pll-periph";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
diff --git a/arch/arm/boot/dts/sunxi-libretech-all-h3-it.dtsi b/arch/arm/boot/dts/sunxi-libretech-all-h3-it.dtsi
new file mode 100644
index 000000000000..204fba3614f9
--- /dev/null
+++ b/arch/arm/boot/dts/sunxi-libretech-all-h3-it.dtsi
@@ -0,0 +1,180 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2019 Chen-Yu Tsai <wens@csie.org>
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	aliases {
+		serial0 = &uart0;
+		spi0 = &spi0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "d";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		status_led {
+			label = "librecomputer:blue:status";
+			gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA7 */
+		};
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_vcc5v0>;
+	};
+
+	/* This represents the board's 5V input */
+	reg_vcc5v0: vcc5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_vcc_dram: vcc-dram {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-dram";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_vcc5v0>;
+		gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
+		enable-active-high;
+	};
+
+	reg_vcc_io: vcc-io {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-io";
+		/* This is simply a MOSFET switch */
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_vcc3v3>;
+		gpio = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL5 */
+	};
+
+	reg_vcc_usbwifi: vcc-usbwifi {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-usbwifi";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_vcc5v0>;
+		gpio = <&pio 6 4 GPIO_ACTIVE_HIGH>; /* PG4 */
+		enable-active-high;
+	};
+
+	reg_vdd_cpux: vdd-cpux {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-cpux";
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_vcc5v0>;
+		gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+		enable-active-high;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc_io>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&pio {
+	vcc-pa-supply = <&reg_vcc_io>;
+	vcc-pc-supply = <&reg_vcc_io>;
+	vcc-pd-supply = <&reg_vcc_io>;
+	vcc-pe-supply = <&reg_vcc_io>;
+	vcc-pf-supply = <&reg_vcc_io>;
+	vcc-pg-supply = <&reg_vcc_io>;
+};
+
+&r_pio {
+	vcc-pl-supply = <&reg_vcc3v3>;
+};
+
+&spi0 {
+	status = "okay";
+
+	spiflash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_vcc_usbwifi>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/tegra124-apalis-emc.dtsi b/arch/arm/boot/dts/tegra124-apalis-emc.dtsi
index d18eaf4a4a3a..32401457ae71 100644
--- a/arch/arm/boot/dts/tegra124-apalis-emc.dtsi
+++ b/arch/arm/boot/dts/tegra124-apalis-emc.dtsi
@@ -84,7 +84,7 @@
 		};
 	};
 
-	emc@7001b000 {
+	external-memory-controller@7001b000 {
 		emc-timings-1 {
 			nvidia,ram-code = <1>;
 
diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1-emc.dtsi b/arch/arm/boot/dts/tegra124-jetson-tk1-emc.dtsi
index 784a529e1f19..861d3f22116b 100644
--- a/arch/arm/boot/dts/tegra124-jetson-tk1-emc.dtsi
+++ b/arch/arm/boot/dts/tegra124-jetson-tk1-emc.dtsi
@@ -79,7 +79,7 @@
 		};
 	};
 
-	emc@7001b000 {
+	external-memory-controller@7001b000 {
 		emc-timings-3 {
 			nvidia,ram-code = <3>;
 
diff --git a/arch/arm/boot/dts/tegra124-nyan-big-emc.dtsi b/arch/arm/boot/dts/tegra124-nyan-big-emc.dtsi
index fb6b3e1a0b1f..c91647d13a50 100644
--- a/arch/arm/boot/dts/tegra124-nyan-big-emc.dtsi
+++ b/arch/arm/boot/dts/tegra124-nyan-big-emc.dtsi
@@ -219,7 +219,7 @@
 		};
 	};
 
-	emc@7001b000 {
+	external-memory-controller@7001b000 {
 		emc-timings-1 {
 			nvidia,ram-code = <1>;
 
diff --git a/arch/arm/boot/dts/tegra124-nyan-blaze-emc.dtsi b/arch/arm/boot/dts/tegra124-nyan-blaze-emc.dtsi
index c7c31d4c1a2b..d2beea0bd15f 100644
--- a/arch/arm/boot/dts/tegra124-nyan-blaze-emc.dtsi
+++ b/arch/arm/boot/dts/tegra124-nyan-blaze-emc.dtsi
@@ -68,7 +68,7 @@
 		};
 	};
 
-	emc@7001b000 {
+	external-memory-controller@7001b000 {
 		emc-timings-1 {
 			nvidia,ram-code = <1>;
 
diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi
index 413bfb981de8..7f330b1f150f 100644
--- a/arch/arm/boot/dts/tegra124.dtsi
+++ b/arch/arm/boot/dts/tegra124.dtsi
@@ -622,9 +622,11 @@
 		#iommu-cells = <1>;
 	};
 
-	emc: emc@7001b000 {
+	emc: external-memory-controller@7001b000 {
 		compatible = "nvidia,tegra124-emc";
 		reg = <0x0 0x7001b000 0x0 0x1000>;
+		clocks = <&tegra_car TEGRA124_CLK_EMC>;
+		clock-names = "emc";
 
 		nvidia,memory-controller = <&mc>;
 	};
diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts
index 85fce5bc72d6..be0ab9b84b9a 100644
--- a/arch/arm/boot/dts/tegra20-paz00.dts
+++ b/arch/arm/boot/dts/tegra20-paz00.dts
@@ -311,6 +311,52 @@
 		reset-names = "i2c";
 	};
 
+	memory-controller@7000f400 {
+		nvidia,use-ram-code;
+
+		emc-tables@hynix {
+			nvidia,ram-code = <0x0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			emc-table@166500 {
+				reg = <166500>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <166500>;
+				nvidia,emc-registers = <0x0000000a 0x00000016
+					0x00000008 0x00000003 0x00000004 0x00000004
+					0x00000002 0x0000000c 0x00000003 0x00000003
+					0x00000002 0x00000001 0x00000004 0x00000005
+					0x00000004 0x00000009 0x0000000d 0x000004df
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000003 0x00000001 0x0000000a 0x000000c8
+					0x00000003 0x00000006 0x00000004 0x00000008
+					0x00000002 0x00000000 0x00000000 0x00000002
+					0x00000000 0x00000000 0x00000083 0xe03b0323
+					0x007fe010 0x00001414 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@333000 {
+				reg = <333000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <333000>;
+				nvidia,emc-registers = <0x00000018 0x00000033
+					0x00000012 0x00000004 0x00000004 0x00000005
+					0x00000003 0x0000000c 0x00000006 0x00000006
+					0x00000003 0x00000001 0x00000004 0x00000005
+					0x00000004 0x00000009 0x0000000d 0x00000bff
+					0x00000000 0x00000003 0x00000003 0x00000006
+					0x00000006 0x00000001 0x00000011 0x000000c8
+					0x00000003 0x0000000e 0x00000007 0x00000008
+					0x00000002 0x00000000 0x00000000 0x00000002
+					0x00000000 0x00000000 0x00000083 0xf0440303
+					0x007fe010 0x00001414 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+		};
+	};
+
 	i2c@7000d000 {
 		status = "okay";
 		clock-frequency = <400000>;
diff --git a/arch/arm/boot/dts/uniphier-ld4.dtsi b/arch/arm/boot/dts/uniphier-ld4.dtsi
index 58cd4e8fa5be..64ec46c72a4c 100644
--- a/arch/arm/boot/dts/uniphier-ld4.dtsi
+++ b/arch/arm/boot/dts/uniphier-ld4.dtsi
@@ -410,7 +410,8 @@
 			pinctrl-0 = <&pinctrl_nand>;
 			clock-names = "nand", "nand_x", "ecc";
 			clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
-			resets = <&sys_rst 2>;
+			reset-names = "nand", "reg";
+			resets = <&sys_rst 2>, <&sys_rst 2>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/uniphier-pinctrl.dtsi b/arch/arm/boot/dts/uniphier-pinctrl.dtsi
index 1fee5ffbfb9c..bfdfb764b25b 100644
--- a/arch/arm/boot/dts/uniphier-pinctrl.dtsi
+++ b/arch/arm/boot/dts/uniphier-pinctrl.dtsi
@@ -106,6 +106,16 @@
 		function = "i2c4";
 	};
 
+	pinctrl_i2c5: i2c5 {
+		groups = "i2c5";
+		function = "i2c5";
+	};
+
+	pinctrl_i2c6: i2c6 {
+		groups = "i2c6";
+		function = "i2c6";
+	};
+
 	pinctrl_nand: nand {
 		groups = "nand";
 		function = "nand";
diff --git a/arch/arm/boot/dts/uniphier-pro4.dtsi b/arch/arm/boot/dts/uniphier-pro4.dtsi
index 7f64e5a616d6..2ec04d7972ef 100644
--- a/arch/arm/boot/dts/uniphier-pro4.dtsi
+++ b/arch/arm/boot/dts/uniphier-pro4.dtsi
@@ -600,7 +600,8 @@
 			pinctrl-0 = <&pinctrl_nand>;
 			clock-names = "nand", "nand_x", "ecc";
 			clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
-			resets = <&sys_rst 2>;
+			reset-names = "nand", "reg";
+			resets = <&sys_rst 2>, <&sys_rst 2>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/uniphier-pro5.dtsi b/arch/arm/boot/dts/uniphier-pro5.dtsi
index eff74717b37c..ea3961f920a0 100644
--- a/arch/arm/boot/dts/uniphier-pro5.dtsi
+++ b/arch/arm/boot/dts/uniphier-pro5.dtsi
@@ -465,7 +465,8 @@
 			pinctrl-0 = <&pinctrl_nand>;
 			clock-names = "nand", "nand_x", "ecc";
 			clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
-			resets = <&sys_rst 2>;
+			reset-names = "nand", "reg";
+			resets = <&sys_rst 2>, <&sys_rst 2>;
 		};
 
 		emmc: sdhc@68400000 {
diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi
index 4eddbb8d7fca..13b0d4a7741f 100644
--- a/arch/arm/boot/dts/uniphier-pxs2.dtsi
+++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi
@@ -773,7 +773,8 @@
 			pinctrl-0 = <&pinctrl_nand>;
 			clock-names = "nand", "nand_x", "ecc";
 			clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
-			resets = <&sys_rst 2>;
+			reset-names = "nand", "reg";
+			resets = <&sys_rst 2>, <&sys_rst 2>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/uniphier-sld8.dtsi b/arch/arm/boot/dts/uniphier-sld8.dtsi
index cbebb6e4c616..4fc6676f5486 100644
--- a/arch/arm/boot/dts/uniphier-sld8.dtsi
+++ b/arch/arm/boot/dts/uniphier-sld8.dtsi
@@ -414,7 +414,8 @@
 			pinctrl-0 = <&pinctrl_nand>;
 			clock-names = "nand", "nand_x", "ecc";
 			clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
-			resets = <&sys_rst 2>;
+			reset-names = "nand", "reg";
+			resets = <&sys_rst 2>, <&sys_rst 2>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
index 48086c5e8549..e500911ce0a5 100644
--- a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
+++ b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
@@ -323,11 +323,6 @@
 };
 
 &i2c0 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c0>;
-	status = "okay";
-
 	gpio5: io-expander@20 {
 		compatible = "nxp,pca9554";
 		reg = <0x20>;
@@ -350,11 +345,6 @@
 };
 
 &i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
 	tca9548@70 {
 		compatible = "nxp,pca9548";
 		pinctrl-0 = <&pinctrl_i2c_mux_reset>;
diff --git a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
index d7caf618f980..b642520199ba 100644
--- a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
+++ b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
@@ -407,7 +407,7 @@
 	pinctrl-0 = <&pinctrl_dspi1>;
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
@@ -420,7 +420,7 @@
 		};
 	};
 
-	spi-flash@1 {
+	flash@1 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
@@ -509,7 +509,7 @@
 		#gpio-cells = <2>;
 	};
 
-	lm75@48 {
+	temp-sensor@48 {
 		compatible = "national,lm75";
 		reg = <0x48>;
 	};
@@ -524,7 +524,7 @@
 		reg = <0x52>;
 	};
 
-	ds1682@6b {
+	elapsed-time-recorder@6b {
 		compatible = "dallas,ds1682";
 		reg = <0x6b>;
 	};
@@ -536,7 +536,12 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	adt7411@4a {
+	watchdog@38 {
+		compatible = "zii,rave-wdt";
+		reg = <0x38>;
+	};
+
+	adc@4a {
 		compatible = "adi,adt7411";
 		reg = <0x4a>;
 	};
@@ -548,7 +553,7 @@
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 
-	gpio9: sx1503q@20 {
+	gpio9: io-expander@20 {
 		compatible = "semtech,sx1503q";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_sx1503_20>;
@@ -559,12 +564,12 @@
 		interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
 	};
 
-	lm75@4e {
+	temp-sensor@4e {
 		compatible = "national,lm75";
 		reg = <0x4e>;
 	};
 
-	lm75@4f {
+	temp-sensor@4f {
 		compatible = "national,lm75";
 		reg = <0x4f>;
 	};
@@ -576,17 +581,17 @@
 		reg = <0x23>;
 	};
 
-	adt7411@4a {
+	adc@4a {
 		compatible = "adi,adt7411";
 		reg = <0x4a>;
 	};
 
-	at24c08@54 {
+	eeprom@54 {
 		compatible = "atmel,24c08";
 		reg = <0x54>;
 	};
 
-	tca9548@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9548";
 		pinctrl-names = "default";
 		#address-cells = <1>;
@@ -625,7 +630,7 @@
 		};
 	};
 
-	tca9548@71 {
+	i2c-mux@71 {
 		compatible = "nxp,pca9548";
 		pinctrl-names = "default";
 		reg = <0x71>;
diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
index ca6425ad794c..db3899b07992 100644
--- a/arch/arm/boot/dts/zynq-7000.dtsi
+++ b/arch/arm/boot/dts/zynq-7000.dtsi
@@ -59,6 +59,39 @@
 		regulator-always-on;
 	};
 
+	replicator {
+		compatible = "arm,coresight-static-replicator";
+		clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
+		clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
+
+		out-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* replicator output ports */
+			port@0 {
+				reg = <0>;
+				replicator_out_port0: endpoint {
+					remote-endpoint = <&tpiu_in_port>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				replicator_out_port1: endpoint {
+					remote-endpoint = <&etb_in_port>;
+				};
+			};
+		};
+		in-ports {
+			/* replicator input port */
+			port {
+				replicator_in_port0: endpoint {
+					remote-endpoint = <&funnel_out_port>;
+				};
+			};
+		};
+	};
+
 	amba: amba {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -365,5 +398,107 @@
 			reg = <0xf8005000 0x1000>;
 			timeout-sec = <10>;
 		};
+
+		etb@f8801000 {
+			compatible = "arm,coresight-etb10", "arm,primecell";
+			reg = <0xf8801000 0x1000>;
+			clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
+			clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
+			in-ports {
+				port {
+					etb_in_port: endpoint {
+						remote-endpoint = <&replicator_out_port1>;
+					};
+				};
+			};
+		};
+
+		tpiu@f8803000 {
+			compatible = "arm,coresight-tpiu", "arm,primecell";
+			reg = <0xf8803000 0x1000>;
+			clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
+			clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
+			in-ports {
+				port {
+					tpiu_in_port: endpoint {
+						remote-endpoint = <&replicator_out_port0>;
+					};
+				};
+			};
+		};
+
+		funnel@f8804000 {
+			compatible = "arm,coresight-static-funnel", "arm,primecell";
+			reg = <0xf8804000 0x1000>;
+			clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
+			clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
+
+			/* funnel output ports */
+			out-ports {
+				port {
+					funnel_out_port: endpoint {
+						remote-endpoint =
+							<&replicator_in_port0>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				/* funnel input ports */
+				port@0 {
+					reg = <0>;
+					funnel0_in_port0: endpoint {
+						remote-endpoint = <&ptm0_out_port>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					funnel0_in_port1: endpoint {
+						remote-endpoint = <&ptm1_out_port>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					funnel0_in_port2: endpoint {
+					};
+				};
+				/* The other input ports are not connect to anything */
+			};
+		};
+
+		ptm@f889c000 {
+			compatible = "arm,coresight-etm3x", "arm,primecell";
+			reg = <0xf889c000 0x1000>;
+			clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
+			clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
+			cpu = <&cpu0>;
+			out-ports {
+				port {
+					ptm0_out_port: endpoint {
+						remote-endpoint = <&funnel0_in_port0>;
+					};
+				};
+			};
+		};
+
+		ptm@f889d000 {
+			compatible = "arm,coresight-etm3x", "arm,primecell";
+			reg = <0xf889d000 0x1000>;
+			clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
+			clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
+			cpu = <&cpu1>;
+			out-ports {
+				port {
+					ptm1_out_port: endpoint {
+						remote-endpoint = <&funnel0_in_port1>;
+					};
+				};
+			};
+		};
 	};
 };
diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig
index 3729a6e0ee24..f66bb98a5cce 100644
--- a/arch/arm/configs/at91_dt_defconfig
+++ b/arch/arm/configs/at91_dt_defconfig
@@ -7,17 +7,13 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_EMBEDDED=y
 CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARCH_MULTI_V4T=y
 CONFIG_ARCH_MULTI_V5=y
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_AT91=y
 CONFIG_SOC_AT91RM9200=y
 CONFIG_SOC_AT91SAM9=y
+CONFIG_SOC_SAM9X60=y
 # CONFIG_ATMEL_CLOCKSOURCE_PIT is not set
 CONFIG_AEABI=y
 CONFIG_UACCESS_WITH_MEMCPY=y
@@ -27,6 +23,9 @@ CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_CMDLINE="console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw"
 CONFIG_KEXEC=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -37,13 +36,7 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET6_XFRM_MODE_BEET is not set
 CONFIG_IPV6_SIT_6RD=y
 CONFIG_CFG80211=y
 CONFIG_MAC80211=y
@@ -57,6 +50,7 @@ CONFIG_MTD_BLOCK=y
 CONFIG_MTD_DATAFLASH=y
 CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_SPI_NOR=y
 CONFIG_MTD_UBI=y
 CONFIG_MTD_UBI_GLUEBI=y
 CONFIG_BLK_DEV_LOOP=y
@@ -69,8 +63,8 @@ CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_NETDEVICES=y
-CONFIG_MACB=y
 # CONFIG_NET_VENDOR_BROADCOM is not set
+CONFIG_MACB=y
 CONFIG_DM9000=y
 # CONFIG_NET_VENDOR_FARADAY is not set
 # CONFIG_NET_VENDOR_INTEL is not set
@@ -82,10 +76,12 @@ CONFIG_DM9000=y
 # CONFIG_NET_VENDOR_STMICRO is not set
 CONFIG_DAVICOM_PHY=y
 CONFIG_MICREL_PHY=y
-CONFIG_RTL8187=m
 CONFIG_LIBERTAS=m
 CONFIG_LIBERTAS_SDIO=m
 CONFIG_LIBERTAS_SPI=m
+CONFIG_MWIFIEX=m
+CONFIG_MWIFIEX_SDIO=m
+CONFIG_MWIFIEX_USB=m
 CONFIG_RT2X00=m
 CONFIG_RT2500USB=m
 CONFIG_RT73USB=m
@@ -93,15 +89,10 @@ CONFIG_RT2800USB=m
 CONFIG_RT2800USB_RT53XX=y
 CONFIG_RT2800USB_RT55XX=y
 CONFIG_RT2800USB_UNKNOWN=y
+CONFIG_RTL8187=m
 CONFIG_RTL8192CU=m
 # CONFIG_RTLWIFI_DEBUG is not set
-CONFIG_MWIFIEX=m
-CONFIG_MWIFIEX_SDIO=m
-CONFIG_MWIFIEX_USB=m
 CONFIG_INPUT_POLLDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=480
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=272
 CONFIG_INPUT_JOYDEV=y
 CONFIG_INPUT_EVDEV=y
 # CONFIG_KEYBOARD_ATKBD is not set
@@ -110,6 +101,7 @@ CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
+CONFIG_TOUCHSCREEN_ATMEL_MXT=y
 # CONFIG_SERIO is not set
 CONFIG_LEGACY_PTY_COUNT=4
 CONFIG_SERIAL_ATMEL=y
@@ -119,25 +111,25 @@ CONFIG_I2C_AT91=y
 CONFIG_I2C_GPIO=y
 CONFIG_SPI=y
 CONFIG_SPI_ATMEL=y
-CONFIG_POWER_SUPPLY=y
+CONFIG_SPI_ATMEL_QUADSPI=y
 CONFIG_POWER_RESET=y
+# CONFIG_POWER_RESET_AT91_SAMA5D2_SHDWC is not set
+CONFIG_POWER_SUPPLY=y
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_AT91SAM9X_WATCHDOG=y
+CONFIG_MFD_ATMEL_FLEXCOM=y
 CONFIG_MFD_ATMEL_HLCDC=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_MEDIA_SUPPORT=y
 CONFIG_MEDIA_CAMERA_SUPPORT=y
 CONFIG_V4L_PLATFORM_DRIVERS=y
-CONFIG_SOC_CAMERA=y
 CONFIG_VIDEO_ATMEL_ISI=y
-CONFIG_SOC_CAMERA_OV2640=m
 CONFIG_DRM=y
 CONFIG_DRM_ATMEL_HLCDC=y
 CONFIG_DRM_PANEL_SIMPLE=y
 CONFIG_FB_ATMEL=y
-# CONFIG_LCD_CLASS_DEVICE is not set
 CONFIG_BACKLIGHT_ATMEL_LCDC=y
 # CONFIG_BACKLIGHT_GENERIC is not set
 CONFIG_BACKLIGHT_PWM=y
@@ -150,6 +142,9 @@ CONFIG_SND_ATMEL_SOC=y
 CONFIG_SND_AT91_SOC_SAM9G20_WM8731=y
 CONFIG_SND_ATMEL_SOC_WM8904=y
 CONFIG_SND_AT91_SOC_SAM9X5_WM8731=y
+CONFIG_SND_ATMEL_SOC_CLASSD=y
+CONFIG_SND_SOC_MIKROE_PROTO=m
+CONFIG_SND_MCHP_SOC_I2S_MCC=y
 CONFIG_USB=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_EHCI_HCD=y
@@ -165,6 +160,9 @@ CONFIG_USB_AT91=y
 CONFIG_USB_ATMEL_USBA=y
 CONFIG_USB_G_SERIAL=y
 CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_OF_AT91=y
 CONFIG_MMC_ATMELMCI=y
 CONFIG_MMC_SPI=y
 CONFIG_NEW_LEDS=y
@@ -181,9 +179,12 @@ CONFIG_RTC_DRV_AT91RM9200=y
 CONFIG_RTC_DRV_AT91SAM9=y
 CONFIG_DMADEVICES=y
 CONFIG_AT_HDMAC=y
+CONFIG_AT_XDMAC=y
+CONFIG_MICROCHIP_PIT64B=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_IIO=y
 CONFIG_AT91_ADC=y
+CONFIG_AT91_SAMA5D2_ADC=y
 CONFIG_PWM=y
 CONFIG_PWM_ATMEL=y
 CONFIG_PWM_ATMEL_HLCDC_PWM=y
@@ -200,12 +201,6 @@ CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_850=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_UTF8=y
-CONFIG_STRIP_ASM_SYMS=y
-CONFIG_DEBUG_FS=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_FTRACE is not set
-CONFIG_DEBUG_USER=y
 CONFIG_CRYPTO_ECB=y
 CONFIG_CRYPTO_USER_API_HASH=m
 CONFIG_CRYPTO_USER_API_SKCIPHER=m
@@ -215,3 +210,9 @@ CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_ACORN_8x8=y
 CONFIG_FONT_MINI_4x6=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_DEBUG_FS=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_FTRACE is not set
+CONFIG_DEBUG_USER=y
diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig
index fde84f123fbb..c8e0c14092e8 100644
--- a/arch/arm/configs/exynos_defconfig
+++ b/arch/arm/configs/exynos_defconfig
@@ -38,6 +38,7 @@ CONFIG_CRYPTO_SHA256_ARM=m
 CONFIG_CRYPTO_SHA512_ARM=m
 CONFIG_CRYPTO_AES_ARM_BS=m
 CONFIG_CRYPTO_CHACHA20_NEON=m
+CONFIG_KALLSYMS_ALL=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_PARTITION_ADVANCED=y
@@ -92,6 +93,7 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_SG=y
 CONFIG_ATA=y
@@ -154,6 +156,7 @@ CONFIG_SENSORS_NTC_THERMISTOR=y
 CONFIG_SENSORS_PWM_FAN=y
 CONFIG_SENSORS_INA2XX=y
 CONFIG_CPU_THERMAL=y
+CONFIG_DEVFREQ_THERMAL=y
 CONFIG_THERMAL_EMULATION=y
 CONFIG_WATCHDOG=y
 CONFIG_S3C2410_WATCHDOG=y
@@ -291,6 +294,7 @@ CONFIG_CROS_EC_SPI=y
 CONFIG_COMMON_CLK_MAX77686=y
 CONFIG_COMMON_CLK_S2MPS11=y
 CONFIG_EXYNOS_IOMMU=y
+CONFIG_PM_DEVFREQ=y
 CONFIG_DEVFREQ_GOV_PERFORMANCE=y
 CONFIG_DEVFREQ_GOV_POWERSAVE=y
 CONFIG_DEVFREQ_GOV_USERSPACE=y
@@ -319,6 +323,8 @@ CONFIG_CRAMFS=y
 CONFIG_ROMFS_FS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V4=y
+CONFIG_NFS_V4_1=y
+CONFIG_NFS_V4_2=y
 CONFIG_ROOT_NFS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ASCII=y
@@ -356,4 +362,7 @@ CONFIG_SOFTLOCKUP_DETECTOR=y
 # CONFIG_DETECT_HUNG_TASK is not set
 CONFIG_PROVE_LOCKING=y
 CONFIG_DEBUG_ATOMIC_SLEEP=y
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
 CONFIG_DEBUG_USER=y
diff --git a/arch/arm/configs/gemini_defconfig b/arch/arm/configs/gemini_defconfig
index f012e81a2fe4..d2d5f1cf815f 100644
--- a/arch/arm/configs/gemini_defconfig
+++ b/arch/arm/configs/gemini_defconfig
@@ -2,28 +2,36 @@
 CONFIG_SYSVIPC=y
 CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_USER_NS=y
 CONFIG_RELAY=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_PARTITION_ADVANCED=y
 CONFIG_ARCH_MULTI_V4=y
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_GEMINI=y
-CONFIG_PCI=y
-CONFIG_PREEMPT=y
 CONFIG_AEABI=y
 CONFIG_HIGHMEM=y
-CONFIG_CMA=y
 CONFIG_CMDLINE="console=ttyS0,115200n8"
 CONFIG_KEXEC=y
-CONFIG_BINFMT_MISC=y
 CONFIG_PM=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_BINFMT_MISC=y
+CONFIG_CMA=y
 CONFIG_NET=y
 CONFIG_UNIX=y
 CONFIG_INET=y
+CONFIG_BRIDGE=y
+CONFIG_BRIDGE_VLAN_FILTERING=y
+CONFIG_NET_DSA=y
+CONFIG_VLAN_8021Q=y
+CONFIG_CFG80211=y
+CONFIG_CFG80211_WEXT=y
+CONFIG_MAC80211=y
+CONFIG_PCI=y
 CONFIG_DEVTMPFS=y
 CONFIG_MTD=y
+CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
@@ -40,10 +48,12 @@ CONFIG_BLK_DEV_SD=y
 CONFIG_ATA=y
 CONFIG_PATA_FTIDE010=y
 CONFIG_NETDEVICES=y
+CONFIG_TUN=y
+CONFIG_NET_DSA_REALTEK_SMI=y
 CONFIG_GEMINI_ETHERNET=y
 CONFIG_MDIO_BITBANG=y
 CONFIG_MDIO_GPIO=y
-CONFIG_REALTEK_PHY=y
+CONFIG_MARVELL_PHY=y
 CONFIG_INPUT_EVDEV=y
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
@@ -69,7 +79,9 @@ CONFIG_DRM_TVE200=y
 CONFIG_LOGO=y
 CONFIG_USB=y
 CONFIG_USB_MON=y
+CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_FOTG210_HCD=y
+CONFIG_USB_UHCI_HCD=y
 CONFIG_USB_STORAGE=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 3608e55eaecd..8f216a599735 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -182,6 +182,7 @@ CONFIG_TOUCHSCREEN_ADS7846=y
 CONFIG_TOUCHSCREEN_DA9052=y
 CONFIG_TOUCHSCREEN_EGALAX=y
 CONFIG_TOUCHSCREEN_GOODIX=y
+CONFIG_TOUCHSCREEN_ILI210X=y
 CONFIG_TOUCHSCREEN_MAX11801=y
 CONFIG_TOUCHSCREEN_IMX6UL_TSC=y
 CONFIG_TOUCHSCREEN_EDT_FT5X06=y
@@ -282,6 +283,7 @@ CONFIG_DRM_MSM=y
 CONFIG_DRM_PANEL_LVDS=y
 CONFIG_DRM_PANEL_SIMPLE=y
 CONFIG_DRM_PANEL_SEIKO_43WVF1G=y
+CONFIG_DRM_TI_TFP410=y
 CONFIG_DRM_DW_HDMI_AHB_AUDIO=m
 CONFIG_DRM_DW_HDMI_CEC=y
 CONFIG_DRM_IMX=y
@@ -323,6 +325,7 @@ CONFIG_USB=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_MXC=y
+CONFIG_USB_ACM=m
 CONFIG_USB_STORAGE=y
 CONFIG_USB_CHIPIDEA=y
 CONFIG_USB_CHIPIDEA_UDC=y
@@ -442,6 +445,8 @@ CONFIG_UBIFS_FS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
+CONFIG_NFS_V4_1=y
+CONFIG_NFS_V4_2=y
 CONFIG_ROOT_NFS=y
 CONFIG_NLS_DEFAULT="cp437"
 CONFIG_NLS_CODEPAGE_437=y
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index f5d19cc1f4f2..017d65f86eba 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -492,6 +492,7 @@ CONFIG_SENSORS_PWM_FAN=m
 CONFIG_SENSORS_RASPBERRYPI_HWMON=m
 CONFIG_SENSORS_INA2XX=m
 CONFIG_CPU_THERMAL=y
+CONFIG_DEVFREQ_THERMAL=y
 CONFIG_IMX_THERMAL=y
 CONFIG_ROCKCHIP_THERMAL=y
 CONFIG_RCAR_THERMAL=y
@@ -592,6 +593,7 @@ CONFIG_REGULATOR_S2MPS11=y
 CONFIG_REGULATOR_S5M8767=y
 CONFIG_REGULATOR_STM32_BOOSTER=m
 CONFIG_REGULATOR_STM32_VREFBUF=m
+CONFIG_REGULATOR_STM32_PWR=y
 CONFIG_REGULATOR_STPMIC1=y
 CONFIG_REGULATOR_TI_ABB=y
 CONFIG_REGULATOR_TPS51632=y
@@ -1093,6 +1095,8 @@ CONFIG_PSTORE_RAM=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
+CONFIG_NFS_V4_1=y
+CONFIG_NFS_V4_2=y
 CONFIG_ROOT_NFS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig
index 4dd1d8ca4455..cdc75ef7d529 100644
--- a/arch/arm/configs/qcom_defconfig
+++ b/arch/arm/configs/qcom_defconfig
@@ -148,6 +148,7 @@ CONFIG_MEDIA_SUPPORT=y
 CONFIG_DRM=y
 CONFIG_DRM_MSM=m
 CONFIG_DRM_PANEL_SIMPLE=y
+CONFIG_DRM_ANALOGIX_ANX78XX=m
 CONFIG_FB=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 # CONFIG_LCD_CLASS_DEVICE is not set
@@ -251,6 +252,9 @@ CONFIG_PHY_QCOM_IPQ806X_SATA=y
 CONFIG_PHY_QCOM_USB_HS=y
 CONFIG_PHY_QCOM_USB_HSIC=y
 CONFIG_QCOM_QFPROM=y
+CONFIG_INTERCONNECT=y
+CONFIG_INTERCONNECT_QCOM=y
+CONFIG_INTERCONNECT_QCOM_MSM8974=m
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT3_FS=y
diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig
index de3830443613..64fa849f8bbe 100644
--- a/arch/arm/configs/shmobile_defconfig
+++ b/arch/arm/configs/shmobile_defconfig
@@ -64,6 +64,7 @@ CONFIG_INPUT_EVDEV=y
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_EDT_FT5X06=y
 CONFIG_TOUCHSCREEN_ST1232=y
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_ADXL34X=y
@@ -123,7 +124,9 @@ CONFIG_VIDEO_ADV7604=y
 CONFIG_VIDEO_ML86V7667=y
 CONFIG_DRM=y
 CONFIG_DRM_RCAR_DU=y
+CONFIG_DRM_PANEL_SIMPLE=y
 CONFIG_DRM_DUMB_VGA_DAC=y
+CONFIG_DRM_LVDS_CODEC=y
 CONFIG_DRM_SII902X=y
 CONFIG_DRM_I2C_ADV7511=y
 CONFIG_DRM_I2C_ADV7511_AUDIO=y
diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig
index 822cddfbf1af..4dd5c92fe3b7 100644
--- a/arch/arm/configs/u8500_defconfig
+++ b/arch/arm/configs/u8500_defconfig
@@ -12,7 +12,9 @@ CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_CMDLINE="root=/dev/ram0 console=ttyAMA2,115200n8"
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPUFREQ_DT=y
 CONFIG_CPU_IDLE=y
 CONFIG_ARM_U8500_CPUIDLE=y
 CONFIG_VFP=y
diff --git a/arch/arm/include/asm/kvm_emulate.h b/arch/arm/include/asm/kvm_emulate.h
index 9b118516d2db..3944305e81df 100644
--- a/arch/arm/include/asm/kvm_emulate.h
+++ b/arch/arm/include/asm/kvm_emulate.h
@@ -9,18 +9,29 @@
 
 #include <linux/kvm_host.h>
 #include <asm/kvm_asm.h>
-#include <asm/kvm_mmio.h>
 #include <asm/kvm_arm.h>
 #include <asm/cputype.h>
 
 /* arm64 compatibility macros */
+#define PSR_AA32_MODE_FIQ	FIQ_MODE
+#define PSR_AA32_MODE_SVC	SVC_MODE
 #define PSR_AA32_MODE_ABT	ABT_MODE
 #define PSR_AA32_MODE_UND	UND_MODE
 #define PSR_AA32_T_BIT		PSR_T_BIT
+#define PSR_AA32_F_BIT		PSR_F_BIT
 #define PSR_AA32_I_BIT		PSR_I_BIT
 #define PSR_AA32_A_BIT		PSR_A_BIT
 #define PSR_AA32_E_BIT		PSR_E_BIT
 #define PSR_AA32_IT_MASK	PSR_IT_MASK
+#define PSR_AA32_GE_MASK	0x000f0000
+#define PSR_AA32_DIT_BIT	0x00200000
+#define PSR_AA32_PAN_BIT	0x00400000
+#define PSR_AA32_SSBS_BIT	0x00800000
+#define PSR_AA32_Q_BIT		PSR_Q_BIT
+#define PSR_AA32_V_BIT		PSR_V_BIT
+#define PSR_AA32_C_BIT		PSR_C_BIT
+#define PSR_AA32_Z_BIT		PSR_Z_BIT
+#define PSR_AA32_N_BIT		PSR_N_BIT
 
 unsigned long *vcpu_reg(struct kvm_vcpu *vcpu, u8 reg_num);
 
@@ -41,6 +52,11 @@ static inline void vcpu_write_spsr(struct kvm_vcpu *vcpu, unsigned long v)
 	*__vcpu_spsr(vcpu) = v;
 }
 
+static inline unsigned long host_spsr_to_spsr32(unsigned long spsr)
+{
+	return spsr;
+}
+
 static inline unsigned long vcpu_get_reg(struct kvm_vcpu *vcpu,
 					 u8 reg_num)
 {
@@ -182,6 +198,11 @@ static inline bool kvm_vcpu_dabt_issext(struct kvm_vcpu *vcpu)
 	return kvm_vcpu_get_hsr(vcpu) & HSR_SSE;
 }
 
+static inline bool kvm_vcpu_dabt_issf(const struct kvm_vcpu *vcpu)
+{
+	return false;
+}
+
 static inline int kvm_vcpu_dabt_get_rd(struct kvm_vcpu *vcpu)
 {
 	return (kvm_vcpu_get_hsr(vcpu) & HSR_SRT_MASK) >> HSR_SRT_SHIFT;
@@ -198,7 +219,7 @@ static inline bool kvm_vcpu_dabt_is_cm(struct kvm_vcpu *vcpu)
 }
 
 /* Get Access Size from a data abort */
-static inline int kvm_vcpu_dabt_get_as(struct kvm_vcpu *vcpu)
+static inline unsigned int kvm_vcpu_dabt_get_as(struct kvm_vcpu *vcpu)
 {
 	switch ((kvm_vcpu_get_hsr(vcpu) >> 22) & 0x3) {
 	case 0:
@@ -209,7 +230,7 @@ static inline int kvm_vcpu_dabt_get_as(struct kvm_vcpu *vcpu)
 		return 4;
 	default:
 		kvm_err("Hardware is weird: SAS 0b11 is reserved\n");
-		return -EFAULT;
+		return 4;
 	}
 }
 
diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h
index 556cd818eccf..c3314b286a61 100644
--- a/arch/arm/include/asm/kvm_host.h
+++ b/arch/arm/include/asm/kvm_host.h
@@ -14,7 +14,6 @@
 #include <asm/cputype.h>
 #include <asm/kvm.h>
 #include <asm/kvm_asm.h>
-#include <asm/kvm_mmio.h>
 #include <asm/fpstate.h>
 #include <kvm/arm_arch_timer.h>
 
@@ -202,9 +201,6 @@ struct kvm_vcpu_arch {
 	 /* Don't run the guest (internal implementation need) */
 	bool pause;
 
-	/* IO related fields */
-	struct kvm_decode mmio_decode;
-
 	/* Cache some mmu pages needed inside spinlock regions */
 	struct kvm_mmu_memory_cache mmu_page_cache;
 
@@ -284,8 +280,6 @@ int kvm_arm_copy_reg_indices(struct kvm_vcpu *vcpu, u64 __user *indices);
 int kvm_age_hva(struct kvm *kvm, unsigned long start, unsigned long end);
 int kvm_test_age_hva(struct kvm *kvm, unsigned long hva);
 
-struct kvm_vcpu *kvm_arm_get_running_vcpu(void);
-struct kvm_vcpu __percpu **kvm_get_running_vcpus(void);
 void kvm_arm_halt_guest(struct kvm *kvm);
 void kvm_arm_resume_guest(struct kvm *kvm);
 
@@ -300,6 +294,14 @@ int handle_exit(struct kvm_vcpu *vcpu, struct kvm_run *run,
 static inline void handle_exit_early(struct kvm_vcpu *vcpu, struct kvm_run *run,
 				     int exception_index) {}
 
+/* MMIO helpers */
+void kvm_mmio_write_buf(void *buf, unsigned int len, unsigned long data);
+unsigned long kvm_mmio_read_buf(const void *buf, unsigned int len);
+
+int kvm_handle_mmio_return(struct kvm_vcpu *vcpu, struct kvm_run *run);
+int io_mem_abort(struct kvm_vcpu *vcpu, struct kvm_run *run,
+		 phys_addr_t fault_ipa);
+
 static inline void __cpu_init_hyp_mode(phys_addr_t pgd_ptr,
 				       unsigned long hyp_stack_ptr,
 				       unsigned long vector_ptr)
@@ -363,9 +365,9 @@ struct kvm_vcpu *kvm_mpidr_to_vcpu(struct kvm *kvm, unsigned long mpidr);
 static inline bool kvm_arch_requires_vhe(void) { return false; }
 static inline void kvm_arch_hardware_unsetup(void) {}
 static inline void kvm_arch_sync_events(struct kvm *kvm) {}
-static inline void kvm_arch_vcpu_uninit(struct kvm_vcpu *vcpu) {}
 static inline void kvm_arch_sched_in(struct kvm_vcpu *vcpu, int cpu) {}
 static inline void kvm_arch_vcpu_block_finish(struct kvm_vcpu *vcpu) {}
+static inline void kvm_arm_vcpu_destroy(struct kvm_vcpu *vcpu) {}
 
 static inline void kvm_arm_init_debug(void) {}
 static inline void kvm_arm_setup_debug(struct kvm_vcpu *vcpu) {}
diff --git a/arch/arm/include/asm/kvm_hyp.h b/arch/arm/include/asm/kvm_hyp.h
index 40e9034db601..3c1b55ecc578 100644
--- a/arch/arm/include/asm/kvm_hyp.h
+++ b/arch/arm/include/asm/kvm_hyp.h
@@ -10,6 +10,7 @@
 #include <linux/compiler.h>
 #include <linux/kvm_host.h>
 #include <asm/cp15.h>
+#include <asm/kvm_arm.h>
 #include <asm/vfp.h>
 
 #define __hyp_text __section(.hyp.text) notrace
diff --git a/arch/arm/include/asm/kvm_mmio.h b/arch/arm/include/asm/kvm_mmio.h
deleted file mode 100644
index 7c0eddb0adb2..000000000000
--- a/arch/arm/include/asm/kvm_mmio.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2012 - Virtual Open Systems and Columbia University
- * Author: Christoffer Dall <c.dall@virtualopensystems.com>
- */
-
-#ifndef __ARM_KVM_MMIO_H__
-#define __ARM_KVM_MMIO_H__
-
-#include <linux/kvm_host.h>
-#include <asm/kvm_asm.h>
-#include <asm/kvm_arm.h>
-
-struct kvm_decode {
-	unsigned long rt;
-	bool sign_extend;
-};
-
-void kvm_mmio_write_buf(void *buf, unsigned int len, unsigned long data);
-unsigned long kvm_mmio_read_buf(const void *buf, unsigned int len);
-
-int kvm_handle_mmio_return(struct kvm_vcpu *vcpu, struct kvm_run *run);
-int io_mem_abort(struct kvm_vcpu *vcpu, struct kvm_run *run,
-		 phys_addr_t fault_ipa);
-
-#endif	/* __ARM_KVM_MMIO_H__ */
diff --git a/arch/arm/include/asm/pgtable-2level.h b/arch/arm/include/asm/pgtable-2level.h
index 51beec41d48c..0d3ea35c97fe 100644
--- a/arch/arm/include/asm/pgtable-2level.h
+++ b/arch/arm/include/asm/pgtable-2level.h
@@ -189,6 +189,7 @@ static inline pmd_t *pmd_offset(pud_t *pud, unsigned long addr)
 }
 
 #define pmd_large(pmd)		(pmd_val(pmd) & 2)
+#define pmd_leaf(pmd)		(pmd_val(pmd) & 2)
 #define pmd_bad(pmd)		(pmd_val(pmd) & 2)
 #define pmd_present(pmd)	(pmd_val(pmd))
 
diff --git a/arch/arm/include/asm/pgtable-3level.h b/arch/arm/include/asm/pgtable-3level.h
index 5b18295021a0..ad55ab068dbf 100644
--- a/arch/arm/include/asm/pgtable-3level.h
+++ b/arch/arm/include/asm/pgtable-3level.h
@@ -134,6 +134,7 @@
 #define pmd_sect(pmd)		((pmd_val(pmd) & PMD_TYPE_MASK) == \
 						 PMD_TYPE_SECT)
 #define pmd_large(pmd)		pmd_sect(pmd)
+#define pmd_leaf(pmd)		pmd_sect(pmd)
 
 #define pud_clear(pudp)			\
 	do {				\
diff --git a/arch/arm/include/asm/pgtable-nommu.h b/arch/arm/include/asm/pgtable-nommu.h
index 010fa1a35a68..30fb2330f57b 100644
--- a/arch/arm/include/asm/pgtable-nommu.h
+++ b/arch/arm/include/asm/pgtable-nommu.h
@@ -42,12 +42,6 @@
 
 #define swapper_pg_dir ((pgd_t *) 0)
 
-#define __swp_type(x)		(0)
-#define __swp_offset(x)		(0)
-#define __swp_entry(typ,off)	((swp_entry_t) { ((typ) | ((off) << 7)) })
-#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
-#define __swp_entry_to_pte(x)	((pte_t) { (x).val })
-
 
 typedef pte_t *pte_addr_t;
 
diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h
index 669474add486..4d4e7b6aabff 100644
--- a/arch/arm/include/asm/tlb.h
+++ b/arch/arm/include/asm/tlb.h
@@ -37,10 +37,6 @@ static inline void __tlb_remove_table(void *_table)
 
 #include <asm-generic/tlb.h>
 
-#ifndef CONFIG_HAVE_RCU_TABLE_FREE
-#define tlb_remove_table(tlb, entry) tlb_remove_page(tlb, entry)
-#endif
-
 static inline void
 __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte, unsigned long addr)
 {
diff --git a/arch/arm/include/debug/brcmstb.S b/arch/arm/include/debug/brcmstb.S
index bf8702ee8f86..132a20c4a676 100644
--- a/arch/arm/include/debug/brcmstb.S
+++ b/arch/arm/include/debug/brcmstb.S
@@ -31,6 +31,7 @@
 #define UARTA_7268		UARTA_7255
 #define UARTA_7271		UARTA_7268
 #define UARTA_7278		REG_PHYS_ADDR_V7(0x40c000)
+#define UARTA_7216		UARTA_7278
 #define UARTA_7364		REG_PHYS_ADDR(0x40b000)
 #define UARTA_7366		UARTA_7364
 #define UARTA_74371		REG_PHYS_ADDR(0x406b00)
@@ -82,17 +83,18 @@ ARM_BE8(	rev	\rv, \rv )
 
 		/* Chip specific detection starts here */
 20:		checkuart(\rp, \rv, 0x33900000, 3390)
-21:		checkuart(\rp, \rv, 0x72500000, 7250)
-22:		checkuart(\rp, \rv, 0x72550000, 7255)
-23:		checkuart(\rp, \rv, 0x72600000, 7260)
-24:		checkuart(\rp, \rv, 0x72680000, 7268)
-25:		checkuart(\rp, \rv, 0x72710000, 7271)
-26:		checkuart(\rp, \rv, 0x72780000, 7278)
-27:		checkuart(\rp, \rv, 0x73640000, 7364)
-28:		checkuart(\rp, \rv, 0x73660000, 7366)
-29:		checkuart(\rp, \rv, 0x07437100, 74371)
-30:		checkuart(\rp, \rv, 0x74390000, 7439)
-31:		checkuart(\rp, \rv, 0x74450000, 7445)
+21:		checkuart(\rp, \rv, 0x72160000, 7216)
+22:		checkuart(\rp, \rv, 0x72500000, 7250)
+23:		checkuart(\rp, \rv, 0x72550000, 7255)
+24:		checkuart(\rp, \rv, 0x72600000, 7260)
+25:		checkuart(\rp, \rv, 0x72680000, 7268)
+26:		checkuart(\rp, \rv, 0x72710000, 7271)
+27:		checkuart(\rp, \rv, 0x72780000, 7278)
+28:		checkuart(\rp, \rv, 0x73640000, 7364)
+29:		checkuart(\rp, \rv, 0x73660000, 7366)
+30:		checkuart(\rp, \rv, 0x07437100, 74371)
+31:		checkuart(\rp, \rv, 0x74390000, 7439)
+32:		checkuart(\rp, \rv, 0x74450000, 7445)
 
 		/* No valid UART found */
 90:		mov	\rp, #0
diff --git a/arch/arm/kernel/atags_proc.c b/arch/arm/kernel/atags_proc.c
index 312cb89ec364..4247ebf4b893 100644
--- a/arch/arm/kernel/atags_proc.c
+++ b/arch/arm/kernel/atags_proc.c
@@ -17,9 +17,9 @@ static ssize_t atags_read(struct file *file, char __user *buf,
 	return simple_read_from_buffer(buf, count, ppos, b->data, b->size);
 }
 
-static const struct file_operations atags_fops = {
-	.read = atags_read,
-	.llseek = default_llseek,
+static const struct proc_ops atags_proc_ops = {
+	.proc_read	= atags_read,
+	.proc_lseek	= default_llseek,
 };
 
 #define BOOT_PARAMS_SIZE 1536
@@ -61,7 +61,7 @@ static int __init init_atags_procfs(void)
 	b->size = size;
 	memcpy(b->data, atags_copy, size);
 
-	tags_entry = proc_create_data("atags", 0400, NULL, &atags_fops, b);
+	tags_entry = proc_create_data("atags", 0400, NULL, &atags_proc_ops, b);
 	if (!tags_entry)
 		goto nomem;
 
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index d0a464e317ea..d8e18cdd96d3 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -1164,8 +1164,6 @@ void __init setup_arch(char **cmdline_p)
 #ifdef CONFIG_VT
 #if defined(CONFIG_VGA_CONSOLE)
 	conswitchp = &vga_con;
-#elif defined(CONFIG_DUMMY_CONSOLE)
-	conswitchp = &dummy_con;
 #endif
 #endif
 
diff --git a/arch/arm/kernel/stacktrace.c b/arch/arm/kernel/stacktrace.c
index 71778bb0475b..cc726afea023 100644
--- a/arch/arm/kernel/stacktrace.c
+++ b/arch/arm/kernel/stacktrace.c
@@ -92,6 +92,8 @@ static int save_trace(struct stackframe *frame, void *d)
 		return 0;
 
 	regs = (struct pt_regs *)frame->sp;
+	if ((unsigned long)&regs[1] > ALIGN(frame->sp, THREAD_SIZE))
+		return 0;
 
 	trace->entries[trace->nr_entries++] = regs->ARM_pc;
 
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index abb7dd7e656f..1e70e7227f0f 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -64,14 +64,16 @@ static void dump_mem(const char *, const char *, unsigned long, unsigned long);
 
 void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long frame)
 {
+	unsigned long end = frame + 4 + sizeof(struct pt_regs);
+
 #ifdef CONFIG_KALLSYMS
 	printk("[<%08lx>] (%ps) from [<%08lx>] (%pS)\n", where, (void *)where, from, (void *)from);
 #else
 	printk("Function entered at [<%08lx>] from [<%08lx>]\n", where, from);
 #endif
 
-	if (in_entry_text(from))
-		dump_mem("", "Exception stack", frame + 4, frame + 4 + sizeof(struct pt_regs));
+	if (in_entry_text(from) && end <= ALIGN(frame, THREAD_SIZE))
+		dump_mem("", "Exception stack", frame + 4, end);
 }
 
 void dump_backtrace_stm(u32 *stack, u32 instruction)
diff --git a/arch/arm/kvm/guest.c b/arch/arm/kvm/guest.c
index 0e6f23504c26..9f7ae0d8690f 100644
--- a/arch/arm/kvm/guest.c
+++ b/arch/arm/kvm/guest.c
@@ -34,11 +34,6 @@ struct kvm_stats_debugfs_item debugfs_entries[] = {
 	{ NULL }
 };
 
-int kvm_arch_vcpu_setup(struct kvm_vcpu *vcpu)
-{
-	return 0;
-}
-
 static u64 core_reg_offset_from_id(u64 id)
 {
 	return id & ~(KVM_REG_ARCH_MASK | KVM_REG_SIZE_MASK | KVM_REG_ARM_CORE);
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index af41725fcc72..7979420bd48b 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -105,11 +105,28 @@ config SOC_AT91SAM9
 	    AT91SAM9X35
 	    AT91SAM9XE
 
+config SOC_SAM9X60
+	bool "SAM9X60"
+	depends on ARCH_MULTI_V5
+	select ATMEL_AIC5_IRQ
+	select ATMEL_PM if PM
+	select ATMEL_SDRAMC
+	select CPU_ARM926T
+	select HAVE_AT91_USB_CLK
+	select HAVE_AT91_GENERATED_CLK
+	select HAVE_AT91_SAM9X60_PLL
+	select MEMORY
+	select PINCTRL_AT91
+	select SOC_SAM_V4_V5
+	select SRAM if PM
+	help
+	  Select this if you are using Microchip's SAM9X60 SoC
+
 comment "Clocksource driver selection"
 
 config ATMEL_CLOCKSOURCE_PIT
 	bool "Periodic Interval Timer (PIT) support"
-	depends on SOC_AT91SAM9 || SOC_SAMA5
+	depends on SOC_AT91SAM9 || SOC_SAM9X60 || SOC_SAMA5
 	default SOC_AT91SAM9 || SOC_SAMA5
 	select ATMEL_PIT
 	help
@@ -119,7 +136,7 @@ config ATMEL_CLOCKSOURCE_PIT
 
 config ATMEL_CLOCKSOURCE_TCB
 	bool "Timer Counter Blocks (TCB) support"
-	default SOC_AT91RM9200 || SOC_AT91SAM9 || SOC_SAMA5
+	default SOC_AT91RM9200 || SOC_AT91SAM9 || SOC_SAM9X60 || SOC_SAMA5
 	select ATMEL_TCB_CLKSRC
 	help
 	  Select this to get a high precision clocksource based on a
@@ -154,6 +171,9 @@ config HAVE_AT91_AUDIO_PLL
 config HAVE_AT91_I2S_MUX_CLK
 	bool
 
+config HAVE_AT91_SAM9X60_PLL
+	bool
+
 config SOC_SAM_V4_V5
 	bool
 
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index de64301dcff2..f565490f1b70 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -6,6 +6,7 @@
 # CPU-specific support
 obj-$(CONFIG_SOC_AT91RM9200)	+= at91rm9200.o
 obj-$(CONFIG_SOC_AT91SAM9)	+= at91sam9.o
+obj-$(CONFIG_SOC_SAM9X60)	+= sam9x60.o
 obj-$(CONFIG_SOC_SAMA5)		+= sama5.o
 obj-$(CONFIG_SOC_SAMV7)		+= samv7.o
 
diff --git a/arch/arm/mach-at91/at91sam9.c b/arch/arm/mach-at91/at91sam9.c
index bf629c90c758..7e572189a5eb 100644
--- a/arch/arm/mach-at91/at91sam9.c
+++ b/arch/arm/mach-at91/at91sam9.c
@@ -31,21 +31,3 @@ DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM9")
 	.init_machine	= at91sam9_init,
 	.dt_compat	= at91_dt_board_compat,
 MACHINE_END
-
-static void __init sam9x60_init(void)
-{
-	of_platform_default_populate(NULL, NULL, NULL);
-
-	sam9x60_pm_init();
-}
-
-static const char *const sam9x60_dt_board_compat[] __initconst = {
-	"microchip,sam9x60",
-	NULL
-};
-
-DT_MACHINE_START(sam9x60_dt, "Microchip SAM9X60")
-	/* Maintainer: Microchip */
-	.init_machine	= sam9x60_init,
-	.dt_compat	= sam9x60_dt_board_compat,
-MACHINE_END
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index d5af6aedc02c..374b9d155558 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -691,6 +691,12 @@ static void __init at91_pm_use_default_mode(int pm_mode)
 		soc_pm.data.suspend_mode = AT91_PM_ULP0;
 }
 
+static const struct of_device_id atmel_shdwc_ids[] = {
+	{ .compatible = "atmel,sama5d2-shdwc" },
+	{ .compatible = "microchip,sam9x60-shdwc" },
+	{ /* sentinel. */ }
+};
+
 static void __init at91_pm_modes_init(void)
 {
 	struct device_node *np;
@@ -700,7 +706,7 @@ static void __init at91_pm_modes_init(void)
 	    !at91_is_pm_mode_active(AT91_PM_ULP1))
 		return;
 
-	np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-shdwc");
+	np = of_find_matching_node(NULL, atmel_shdwc_ids);
 	if (!np) {
 		pr_warn("%s: failed to find shdwc!\n", __func__);
 		goto ulp1_default;
@@ -751,6 +757,7 @@ static const struct of_device_id atmel_pmc_ids[] __initconst = {
 	{ .compatible = "atmel,sama5d3-pmc", .data = &pmc_infos[1] },
 	{ .compatible = "atmel,sama5d4-pmc", .data = &pmc_infos[1] },
 	{ .compatible = "atmel,sama5d2-pmc", .data = &pmc_infos[1] },
+	{ .compatible = "microchip,sam9x60-pmc", .data = &pmc_infos[1] },
 	{ /* sentinel */ },
 };
 
@@ -805,7 +812,7 @@ void __init at91rm9200_pm_init(void)
 
 void __init sam9x60_pm_init(void)
 {
-	if (!IS_ENABLED(CONFIG_SOC_AT91SAM9))
+	if (!IS_ENABLED(CONFIG_SOC_SAM9X60))
 		return;
 
 	at91_pm_modes_init();
diff --git a/arch/arm/mach-at91/sam9x60.c b/arch/arm/mach-at91/sam9x60.c
new file mode 100644
index 000000000000..d8c739d25458
--- /dev/null
+++ b/arch/arm/mach-at91/sam9x60.c
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Setup code for SAM9X60.
+ *
+ * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Claudiu Beznea <claudiu.beznea@microchip.com>
+ */
+
+#include <linux/of.h>
+#include <linux/of_platform.h>
+
+#include <asm/mach/arch.h>
+#include <asm/system_misc.h>
+
+#include "generic.h"
+
+static void __init sam9x60_init(void)
+{
+	of_platform_default_populate(NULL, NULL, NULL);
+
+	sam9x60_pm_init();
+}
+
+static const char *const sam9x60_dt_board_compat[] __initconst = {
+	"microchip,sam9x60",
+	NULL
+};
+
+DT_MACHINE_START(sam9x60_dt, "Microchip SAM9X60")
+	/* Maintainer: Microchip */
+	.init_machine	= sam9x60_init,
+	.dt_compat	= sam9x60_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index e4e25f287ad7..fcfe2a0e8058 100644
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -211,6 +211,7 @@ config ARCH_BRCMSTB
 	bool "Broadcom BCM7XXX based boards"
 	depends on ARCH_MULTI_V7
 	select ARCH_HAS_RESET_CONTROLLER
+	select ARM_AMBA
 	select ARM_GIC
 	select ARM_ERRATA_798181 if SMP
 	select HAVE_ARM_ARCH_TIMER
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index a03d8443ef08..58838a9de651 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -7,8 +7,7 @@
 ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
 
 # Common objects
-obj-y 					:= time.o serial.o usb.o \
-					   common.o sram.o
+obj-y 					:= serial.o usb.o common.o sram.o
 
 obj-$(CONFIG_DAVINCI_MUX)		+= mux.o
 
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index 150a36f333df..2328b15ac067 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -30,6 +30,8 @@
 #include <linux/spi/eeprom.h>
 #include <linux/v4l2-dv-timings.h>
 #include <linux/platform_data/ti-aemif.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -245,6 +247,19 @@ static struct davinci_i2c_platform_data i2c_pdata = {
 	.bus_delay	= 0	/* usec */,
 };
 
+/* Fixed regulator support */
+static struct regulator_consumer_supply fixed_supplies_3_3v[] = {
+	/* Baseboard 3.3V: 5V -> TPS767D301 -> 3.3V */
+	REGULATOR_SUPPLY("AVDD", "1-0018"),
+	REGULATOR_SUPPLY("DRVDD", "1-0018"),
+	REGULATOR_SUPPLY("IOVDD", "1-0018"),
+};
+
+static struct regulator_consumer_supply fixed_supplies_1_8v[] = {
+	/* Baseboard 1.8V: 5V -> TPS767D301 -> 1.8V */
+	REGULATOR_SUPPLY("DVDD", "1-0018"),
+};
+
 static int dm365evm_keyscan_enable(struct device *dev)
 {
 	return davinci_cfg_reg(DM365_KEYSCAN);
@@ -800,6 +815,11 @@ static __init void dm365_evm_init(void)
 	if (ret)
 		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
 
+	regulator_register_always_on(0, "fixed-dummy", fixed_supplies_1_8v,
+				     ARRAY_SIZE(fixed_supplies_1_8v), 1800000);
+	regulator_register_always_on(1, "fixed-dummy", fixed_supplies_3_3v,
+				     ARRAY_SIZE(fixed_supplies_3_3v), 3300000);
+
 	nvmem_add_cell_table(&davinci_nvmem_cell_table);
 	nvmem_add_cell_lookups(&davinci_nvmem_cell_lookup, 1);
 
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index 9d87d4e440ea..3461d12bbfc0 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -29,6 +29,8 @@
 #include <linux/v4l2-dv-timings.h>
 #include <linux/export.h>
 #include <linux/leds.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
 
 #include <media/i2c/tvp514x.h>
 
@@ -653,6 +655,19 @@ static struct i2c_board_info __initdata i2c_info[] =  {
 	},
 };
 
+/* Fixed regulator support */
+static struct regulator_consumer_supply fixed_supplies_3_3v[] = {
+	/* Baseboard 3.3V: 5V -> TPS54310PWP -> 3.3V */
+	REGULATOR_SUPPLY("AVDD", "1-001b"),
+	REGULATOR_SUPPLY("DRVDD", "1-001b"),
+};
+
+static struct regulator_consumer_supply fixed_supplies_1_8v[] = {
+	/* Baseboard 1.8V: 5V -> TPS54310PWP -> 1.8V */
+	REGULATOR_SUPPLY("IOVDD", "1-001b"),
+	REGULATOR_SUPPLY("DVDD", "1-001b"),
+};
+
 #define DM644X_I2C_SDA_PIN	GPIO_TO_PIN(2, 12)
 #define DM644X_I2C_SCL_PIN	GPIO_TO_PIN(2, 11)
 
@@ -823,6 +838,17 @@ static int davinci_phy_fixup(struct phy_device *phydev)
 
 #define HAS_NAND	IS_ENABLED(CONFIG_MTD_NAND_DAVINCI)
 
+#define GPIO_nVBUS_DRV		160
+
+static struct gpiod_lookup_table dm644evm_usb_gpio_table = {
+	.dev_id = "musb-davinci",
+	.table = {
+		GPIO_LOOKUP("davinci_gpio", GPIO_nVBUS_DRV, NULL,
+			    GPIO_ACTIVE_HIGH),
+		{ }
+	},
+};
+
 static __init void davinci_evm_init(void)
 {
 	int ret;
@@ -831,6 +857,11 @@ static __init void davinci_evm_init(void)
 
 	dm644x_register_clocks();
 
+	regulator_register_always_on(0, "fixed-dummy", fixed_supplies_1_8v,
+				     ARRAY_SIZE(fixed_supplies_1_8v), 1800000);
+	regulator_register_always_on(1, "fixed-dummy", fixed_supplies_3_3v,
+				     ARRAY_SIZE(fixed_supplies_3_3v), 3300000);
+
 	dm644x_init_devices();
 
 	ret = dm644x_gpio_register();
@@ -875,6 +906,7 @@ static __init void davinci_evm_init(void)
 	dm644x_init_asp();
 
 	/* irlml6401 switches over 1A, in under 8 msec */
+	gpiod_add_lookup_table(&dm644evm_usb_gpio_table);
 	davinci_setup_usb(1000, 8);
 
 	if (IS_BUILTIN(CONFIG_PHYLIB)) {
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index 2d69e704f7f6..feb206bdf6e1 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -21,7 +21,6 @@
 #include <mach/common.h>
 #include <mach/cputype.h>
 #include <mach/da8xx.h>
-#include <mach/time.h>
 
 #include "asp.h"
 #include "cpuidle.h"
diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c
index e650131ee88f..849e811fade7 100644
--- a/arch/arm/mach-davinci/devices.c
+++ b/arch/arm/mach-davinci/devices.c
@@ -17,7 +17,6 @@
 #include <mach/hardware.h>
 #include <mach/cputype.h>
 #include <mach/mux.h>
-#include <mach/time.h>
 
 #include "davinci.h"
 #include "irqs.h"
@@ -303,21 +302,3 @@ int davinci_gpio_register(struct resource *res, int size, void *pdata)
 	davinci_gpio_device.dev.platform_data = pdata;
 	return platform_device_register(&davinci_gpio_device);
 }
-
-/*-------------------------------------------------------------------------*/
-
-/*-------------------------------------------------------------------------*/
-
-struct davinci_timer_instance davinci_timer_instance[2] = {
-	{
-		.base		= DAVINCI_TIMER0_BASE,
-		.bottom_irq	= DAVINCI_INTC_IRQ(IRQ_TINT0_TINT12),
-		.top_irq	= DAVINCI_INTC_IRQ(IRQ_TINT0_TINT34),
-	},
-	{
-		.base		= DAVINCI_TIMER1_BASE,
-		.bottom_irq	= DAVINCI_INTC_IRQ(IRQ_TINT1_TINT12),
-		.top_irq	= DAVINCI_INTC_IRQ(IRQ_TINT1_TINT34),
-	},
-};
-
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index 9fc5c73cc0be..c1e0d46996e4 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -35,7 +35,8 @@
 #include <mach/cputype.h>
 #include <mach/mux.h>
 #include <mach/serial.h>
-#include <mach/time.h>
+
+#include <clocksource/timer-davinci.h>
 
 #include "asp.h"
 #include "davinci.h"
@@ -660,10 +661,16 @@ static struct davinci_id dm365_ids[] = {
 	},
 };
 
-static struct davinci_timer_info dm365_timer_info = {
-	.timers		= davinci_timer_instance,
-	.clockevent_id	= T0_BOT,
-	.clocksource_id	= T0_TOP,
+/*
+ * Bottom half of timer0 is used for clockevent, top half is used for
+ * clocksource.
+ */
+static const struct davinci_timer_cfg dm365_timer_cfg = {
+	.reg = DEFINE_RES_IO(DAVINCI_TIMER0_BASE, SZ_128),
+	.irq = {
+		DEFINE_RES_IRQ(DAVINCI_INTC_IRQ(IRQ_TINT0_TINT12)),
+		DEFINE_RES_IRQ(DAVINCI_INTC_IRQ(IRQ_TINT0_TINT34)),
+	},
 };
 
 #define DM365_UART1_BASE	(IO_PHYS + 0x106000)
@@ -723,7 +730,6 @@ static const struct davinci_soc_info davinci_soc_info_dm365 = {
 	.pinmux_base		= DAVINCI_SYSTEM_MODULE_BASE,
 	.pinmux_pins		= dm365_pins,
 	.pinmux_pins_num	= ARRAY_SIZE(dm365_pins),
-	.timer_info		= &dm365_timer_info,
 	.emac_pdata		= &dm365_emac_pdata,
 	.sram_dma		= 0x00010000,
 	.sram_len		= SZ_32K,
@@ -771,6 +777,7 @@ void __init dm365_init_time(void)
 {
 	void __iomem *pll1, *pll2, *psc;
 	struct clk *clk;
+	int rv;
 
 	clk_register_fixed_rate(NULL, "ref_clk", NULL, 0, DM365_REF_FREQ);
 
@@ -789,7 +796,8 @@ void __init dm365_init_time(void)
 		return;
 	}
 
-	davinci_timer_init(clk);
+	rv = davinci_timer_register(clk, &dm365_timer_cfg);
+	WARN(rv, "Unable to register the timer: %d\n", rv);
 }
 
 void __init dm365_register_clocks(void)
diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h
index 9526e5da0d33..139b83de011d 100644
--- a/arch/arm/mach-davinci/include/mach/common.h
+++ b/arch/arm/mach-davinci/include/mach/common.h
@@ -22,22 +22,6 @@
 #define DAVINCI_INTC_START		NR_IRQS
 #define DAVINCI_INTC_IRQ(_irqnum)	(DAVINCI_INTC_START + (_irqnum))
 
-void davinci_timer_init(struct clk *clk);
-
-struct davinci_timer_instance {
-	u32		base;
-	u32		bottom_irq;
-	u32		top_irq;
-	unsigned long	cmp_off;
-	unsigned int	cmp_irq;
-};
-
-struct davinci_timer_info {
-	struct davinci_timer_instance	*timers;
-	unsigned int			clockevent_id;
-	unsigned int			clocksource_id;
-};
-
 struct davinci_gpio_controller;
 
 /*
@@ -58,7 +42,6 @@ struct davinci_soc_info {
 	u32				pinmux_base;
 	const struct mux_config		*pinmux_pins;
 	unsigned long			pinmux_pins_num;
-	struct davinci_timer_info	*timer_info;
 	int				gpio_type;
 	u32				gpio_base;
 	unsigned			gpio_num;
diff --git a/arch/arm/mach-davinci/include/mach/time.h b/arch/arm/mach-davinci/include/mach/time.h
deleted file mode 100644
index ba913736990f..000000000000
--- a/arch/arm/mach-davinci/include/mach/time.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * Local header file for DaVinci time code.
- *
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __ARCH_ARM_MACH_DAVINCI_TIME_H
-#define __ARCH_ARM_MACH_DAVINCI_TIME_H
-
-#define DAVINCI_TIMER1_BASE		(IO_PHYS + 0x21800)
-
-enum {
-	T0_BOT,
-	T0_TOP,
-	T1_BOT,
-	T1_TOP,
-	NUM_TIMERS
-};
-
-#define IS_TIMER1(id)		(id & 0x2)
-#define IS_TIMER0(id)		(!IS_TIMER1(id))
-#define IS_TIMER_TOP(id)	((id & 0x1))
-#define IS_TIMER_BOT(id)	(!IS_TIMER_TOP(id))
-
-#define ID_TO_TIMER(id)		(IS_TIMER1(id) != 0)
-
-extern struct davinci_timer_instance davinci_timer_instance[];
-
-#endif /* __ARCH_ARM_MACH_DAVINCI_TIME_H */
diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c
deleted file mode 100644
index 740410a3bb6a..000000000000
--- a/arch/arm/mach-davinci/time.c
+++ /dev/null
@@ -1,400 +0,0 @@
-/*
- * DaVinci timer subsystem
- *
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/of.h>
-#include <linux/platform_device.h>
-#include <linux/sched_clock.h>
-
-#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
-
-#include <mach/cputype.h>
-#include <mach/hardware.h>
-#include <mach/time.h>
-
-static struct clock_event_device clockevent_davinci;
-static unsigned int davinci_clock_tick_rate;
-
-/*
- * This driver configures the 2 64-bit count-up timers as 4 independent
- * 32-bit count-up timers used as follows:
- */
-
-enum {
-	TID_CLOCKEVENT,
-	TID_CLOCKSOURCE,
-};
-
-/* Timer register offsets */
-#define PID12			0x0
-#define TIM12			0x10
-#define TIM34			0x14
-#define PRD12			0x18
-#define PRD34			0x1c
-#define TCR			0x20
-#define TGCR			0x24
-#define WDTCR			0x28
-
-/* Offsets of the 8 compare registers */
-#define	CMP12_0			0x60
-#define	CMP12_1			0x64
-#define	CMP12_2			0x68
-#define	CMP12_3			0x6c
-#define	CMP12_4			0x70
-#define	CMP12_5			0x74
-#define	CMP12_6			0x78
-#define	CMP12_7			0x7c
-
-/* Timer register bitfields */
-#define TCR_ENAMODE_DISABLE          0x0
-#define TCR_ENAMODE_ONESHOT          0x1
-#define TCR_ENAMODE_PERIODIC         0x2
-#define TCR_ENAMODE_MASK             0x3
-
-#define TGCR_TIMMODE_SHIFT           2
-#define TGCR_TIMMODE_64BIT_GP        0x0
-#define TGCR_TIMMODE_32BIT_UNCHAINED 0x1
-#define TGCR_TIMMODE_64BIT_WDOG      0x2
-#define TGCR_TIMMODE_32BIT_CHAINED   0x3
-
-#define TGCR_TIM12RS_SHIFT           0
-#define TGCR_TIM34RS_SHIFT           1
-#define TGCR_RESET                   0x0
-#define TGCR_UNRESET                 0x1
-#define TGCR_RESET_MASK              0x3
-
-struct timer_s {
-	char *name;
-	unsigned int id;
-	unsigned long period;
-	unsigned long opts;
-	unsigned long flags;
-	void __iomem *base;
-	unsigned long tim_off;
-	unsigned long prd_off;
-	unsigned long enamode_shift;
-	struct irqaction irqaction;
-};
-static struct timer_s timers[];
-
-/* values for 'opts' field of struct timer_s */
-#define TIMER_OPTS_DISABLED		0x01
-#define TIMER_OPTS_ONESHOT		0x02
-#define TIMER_OPTS_PERIODIC		0x04
-#define TIMER_OPTS_STATE_MASK		0x07
-
-#define TIMER_OPTS_USE_COMPARE		0x80000000
-#define USING_COMPARE(t)		((t)->opts & TIMER_OPTS_USE_COMPARE)
-
-static char *id_to_name[] = {
-	[T0_BOT]	= "timer0_0",
-	[T0_TOP]	= "timer0_1",
-	[T1_BOT]	= "timer1_0",
-	[T1_TOP]	= "timer1_1",
-};
-
-static int timer32_config(struct timer_s *t)
-{
-	u32 tcr;
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-
-	if (USING_COMPARE(t)) {
-		struct davinci_timer_instance *dtip =
-				soc_info->timer_info->timers;
-		int event_timer = ID_TO_TIMER(timers[TID_CLOCKEVENT].id);
-
-		/*
-		 * Next interrupt should be the current time reg value plus
-		 * the new period (using 32-bit unsigned addition/wrapping
-		 * to 0 on overflow).  This assumes that the clocksource
-		 * is setup to count to 2^32-1 before wrapping around to 0.
-		 */
-		__raw_writel(__raw_readl(t->base + t->tim_off) + t->period,
-			t->base + dtip[event_timer].cmp_off);
-	} else {
-		tcr = __raw_readl(t->base + TCR);
-
-		/* disable timer */
-		tcr &= ~(TCR_ENAMODE_MASK << t->enamode_shift);
-		__raw_writel(tcr, t->base + TCR);
-
-		/* reset counter to zero, set new period */
-		__raw_writel(0, t->base + t->tim_off);
-		__raw_writel(t->period, t->base + t->prd_off);
-
-		/* Set enable mode */
-		if (t->opts & TIMER_OPTS_ONESHOT)
-			tcr |= TCR_ENAMODE_ONESHOT << t->enamode_shift;
-		else if (t->opts & TIMER_OPTS_PERIODIC)
-			tcr |= TCR_ENAMODE_PERIODIC << t->enamode_shift;
-
-		__raw_writel(tcr, t->base + TCR);
-	}
-	return 0;
-}
-
-static inline u32 timer32_read(struct timer_s *t)
-{
-	return __raw_readl(t->base + t->tim_off);
-}
-
-static irqreturn_t timer_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = &clockevent_davinci;
-
-	evt->event_handler(evt);
-	return IRQ_HANDLED;
-}
-
-/* called when 32-bit counter wraps */
-static irqreturn_t freerun_interrupt(int irq, void *dev_id)
-{
-	return IRQ_HANDLED;
-}
-
-static struct timer_s timers[] = {
-	[TID_CLOCKEVENT] = {
-		.name      = "clockevent",
-		.opts      = TIMER_OPTS_DISABLED,
-		.irqaction = {
-			.flags   = IRQF_TIMER,
-			.handler = timer_interrupt,
-		}
-	},
-	[TID_CLOCKSOURCE] = {
-		.name       = "free-run counter",
-		.period     = ~0,
-		.opts       = TIMER_OPTS_PERIODIC,
-		.irqaction = {
-			.flags   = IRQF_TIMER,
-			.handler = freerun_interrupt,
-		}
-	},
-};
-
-static void __init timer_init(void)
-{
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-	struct davinci_timer_instance *dtip = soc_info->timer_info->timers;
-	void __iomem *base[2];
-	int i;
-
-	/* Global init of each 64-bit timer as a whole */
-	for(i=0; i<2; i++) {
-		u32 tgcr;
-
-		base[i] = ioremap(dtip[i].base, SZ_4K);
-		if (WARN_ON(!base[i]))
-			continue;
-
-		/* Disabled, Internal clock source */
-		__raw_writel(0, base[i] + TCR);
-
-		/* reset both timers, no pre-scaler for timer34 */
-		tgcr = 0;
-		__raw_writel(tgcr, base[i] + TGCR);
-
-		/* Set both timers to unchained 32-bit */
-		tgcr = TGCR_TIMMODE_32BIT_UNCHAINED << TGCR_TIMMODE_SHIFT;
-		__raw_writel(tgcr, base[i] + TGCR);
-
-		/* Unreset timers */
-		tgcr |= (TGCR_UNRESET << TGCR_TIM12RS_SHIFT) |
-			(TGCR_UNRESET << TGCR_TIM34RS_SHIFT);
-		__raw_writel(tgcr, base[i] + TGCR);
-
-		/* Init both counters to zero */
-		__raw_writel(0, base[i] + TIM12);
-		__raw_writel(0, base[i] + TIM34);
-	}
-
-	/* Init of each timer as a 32-bit timer */
-	for (i=0; i< ARRAY_SIZE(timers); i++) {
-		struct timer_s *t = &timers[i];
-		int timer = ID_TO_TIMER(t->id);
-		u32 irq;
-
-		t->base = base[timer];
-		if (!t->base)
-			continue;
-
-		if (IS_TIMER_BOT(t->id)) {
-			t->enamode_shift = 6;
-			t->tim_off = TIM12;
-			t->prd_off = PRD12;
-			irq = dtip[timer].bottom_irq;
-		} else {
-			t->enamode_shift = 22;
-			t->tim_off = TIM34;
-			t->prd_off = PRD34;
-			irq = dtip[timer].top_irq;
-		}
-
-		/* Register interrupt */
-		t->irqaction.name = t->name;
-		t->irqaction.dev_id = (void *)t;
-
-		if (t->irqaction.handler != NULL) {
-			irq = USING_COMPARE(t) ? dtip[i].cmp_irq : irq;
-			setup_irq(irq, &t->irqaction);
-		}
-	}
-}
-
-/*
- * clocksource
- */
-static u64 read_cycles(struct clocksource *cs)
-{
-	struct timer_s *t = &timers[TID_CLOCKSOURCE];
-
-	return (cycles_t)timer32_read(t);
-}
-
-static struct clocksource clocksource_davinci = {
-	.rating		= 300,
-	.read		= read_cycles,
-	.mask		= CLOCKSOURCE_MASK(32),
-	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-/*
- * Overwrite weak default sched_clock with something more precise
- */
-static u64 notrace davinci_read_sched_clock(void)
-{
-	return timer32_read(&timers[TID_CLOCKSOURCE]);
-}
-
-/*
- * clockevent
- */
-static int davinci_set_next_event(unsigned long cycles,
-				  struct clock_event_device *evt)
-{
-	struct timer_s *t = &timers[TID_CLOCKEVENT];
-
-	t->period = cycles;
-	timer32_config(t);
-	return 0;
-}
-
-static int davinci_shutdown(struct clock_event_device *evt)
-{
-	struct timer_s *t = &timers[TID_CLOCKEVENT];
-
-	t->opts &= ~TIMER_OPTS_STATE_MASK;
-	t->opts |= TIMER_OPTS_DISABLED;
-	return 0;
-}
-
-static int davinci_set_oneshot(struct clock_event_device *evt)
-{
-	struct timer_s *t = &timers[TID_CLOCKEVENT];
-
-	t->opts &= ~TIMER_OPTS_STATE_MASK;
-	t->opts |= TIMER_OPTS_ONESHOT;
-	return 0;
-}
-
-static int davinci_set_periodic(struct clock_event_device *evt)
-{
-	struct timer_s *t = &timers[TID_CLOCKEVENT];
-
-	t->period = davinci_clock_tick_rate / (HZ);
-	t->opts &= ~TIMER_OPTS_STATE_MASK;
-	t->opts |= TIMER_OPTS_PERIODIC;
-	timer32_config(t);
-	return 0;
-}
-
-static struct clock_event_device clockevent_davinci = {
-	.features		= CLOCK_EVT_FEAT_PERIODIC |
-				  CLOCK_EVT_FEAT_ONESHOT,
-	.set_next_event		= davinci_set_next_event,
-	.set_state_shutdown	= davinci_shutdown,
-	.set_state_periodic	= davinci_set_periodic,
-	.set_state_oneshot	= davinci_set_oneshot,
-};
-
-void __init davinci_timer_init(struct clk *timer_clk)
-{
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-	unsigned int clockevent_id;
-	unsigned int clocksource_id;
-	int i;
-
-	clockevent_id = soc_info->timer_info->clockevent_id;
-	clocksource_id = soc_info->timer_info->clocksource_id;
-
-	timers[TID_CLOCKEVENT].id = clockevent_id;
-	timers[TID_CLOCKSOURCE].id = clocksource_id;
-
-	/*
-	 * If using same timer for both clock events & clocksource,
-	 * a compare register must be used to generate an event interrupt.
-	 * This is equivalent to a oneshot timer only (not periodic).
-	 */
-	if (clockevent_id == clocksource_id) {
-		struct davinci_timer_instance *dtip =
-				soc_info->timer_info->timers;
-		int event_timer = ID_TO_TIMER(clockevent_id);
-
-		/* Only bottom timers can use compare regs */
-		if (IS_TIMER_TOP(clockevent_id))
-			pr_warn("%s: Invalid use of system timers.  Results unpredictable.\n",
-				__func__);
-		else if ((dtip[event_timer].cmp_off == 0)
-				|| (dtip[event_timer].cmp_irq == 0))
-			pr_warn("%s: Invalid timer instance setup.  Results unpredictable.\n",
-				__func__);
-		else {
-			timers[TID_CLOCKEVENT].opts |= TIMER_OPTS_USE_COMPARE;
-			clockevent_davinci.features = CLOCK_EVT_FEAT_ONESHOT;
-		}
-	}
-
-	BUG_ON(IS_ERR(timer_clk));
-	clk_prepare_enable(timer_clk);
-
-	/* init timer hw */
-	timer_init();
-
-	davinci_clock_tick_rate = clk_get_rate(timer_clk);
-
-	/* setup clocksource */
-	clocksource_davinci.name = id_to_name[clocksource_id];
-	if (clocksource_register_hz(&clocksource_davinci,
-				    davinci_clock_tick_rate))
-		pr_err("%s: can't register clocksource!\n",
-		       clocksource_davinci.name);
-
-	sched_clock_register(davinci_read_sched_clock, 32,
-			  davinci_clock_tick_rate);
-
-	/* setup clockevent */
-	clockevent_davinci.name = id_to_name[timers[TID_CLOCKEVENT].id];
-
-	clockevent_davinci.cpumask = cpumask_of(0);
-	clockevents_config_and_register(&clockevent_davinci,
-					davinci_clock_tick_rate, 1, 0xfffffffe);
-
-	for (i=0; i< ARRAY_SIZE(timers); i++)
-		timer32_config(&timers[i]);
-}
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 6e7f10c8098a..cbbe03e96de8 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -3,10 +3,10 @@
 # Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
 #		http://www.samsung.com/
 
-# Configuration options for the EXYNOS
+# Configuration options for the Samsung Exynos
 
 menuconfig ARCH_EXYNOS
-	bool "Samsung EXYNOS"
+	bool "Samsung Exynos"
 	depends on ARCH_MULTI_V7
 	select ARCH_HAS_HOLES_MEMORYMODEL
 	select ARCH_SUPPORTS_BIG_ENDIAN
@@ -42,7 +42,7 @@ menuconfig ARCH_EXYNOS
 	select POWER_RESET_SYSCON
 	select POWER_RESET_SYSCON_POWEROFF
 	help
-	  Support for SAMSUNG EXYNOS SoCs (EXYNOS4/5)
+	  Support for Samsung Exynos SoCs
 
 if ARCH_EXYNOS
 
@@ -52,63 +52,62 @@ config S5P_DEV_MFC
 	  Compile in setup memory (init) code for MFC
 
 config ARCH_EXYNOS3
-	bool "SAMSUNG EXYNOS3"
+	bool "Samsung Exynos3"
 	default y
 	select ARM_CPU_SUSPEND if PM
 	help
-	  Samsung EXYNOS3 (Cortex-A7) SoC based systems
+	  Samsung Exynos3 (Cortex-A7) SoC based systems
 
 config ARCH_EXYNOS4
-	bool "SAMSUNG EXYNOS4"
+	bool "Samsung Exynos4"
 	default y
 	select ARM_CPU_SUSPEND if PM_SLEEP
 	select CLKSRC_SAMSUNG_PWM if CPU_EXYNOS4210
 	select CPU_EXYNOS4210
 	select GIC_NON_BANKED
-	select MIGHT_HAVE_CACHE_L2X0
 	help
-	  Samsung EXYNOS4 (Cortex-A9) SoC based systems
+	  Samsung Exynos4 (Cortex-A9) SoC based systems
 
 config ARCH_EXYNOS5
-	bool "SAMSUNG EXYNOS5"
+	bool "Samsung Exynos5"
 	default y
 	help
-	  Samsung EXYNOS5 (Cortex-A15/A7) SoC based systems
+	  Samsung Exynos5 (Cortex-A15/A7) SoC based systems
 
-comment "EXYNOS SoCs"
+comment "Exynos SoCs"
 
 config SOC_EXYNOS3250
-	bool "SAMSUNG EXYNOS3250"
+	bool "Samsung Exynos3250"
 	default y
 	depends on ARCH_EXYNOS3
 
 config CPU_EXYNOS4210
-	bool "SAMSUNG EXYNOS4210"
+	bool "Samsung Exynos4210"
 	default y
 	depends on ARCH_EXYNOS4
 
 config SOC_EXYNOS4412
-	bool "SAMSUNG EXYNOS4412"
+	bool "Samsung Exynos4412"
 	default y
 	depends on ARCH_EXYNOS4
 
 config SOC_EXYNOS5250
-	bool "SAMSUNG EXYNOS5250"
+	bool "Samsung Exynos5250"
 	default y
 	depends on ARCH_EXYNOS5
 
 config SOC_EXYNOS5260
-	bool "SAMSUNG EXYNOS5260"
+	bool "Samsung Exynos5260"
 	default y
 	depends on ARCH_EXYNOS5
 
 config SOC_EXYNOS5410
-	bool "SAMSUNG EXYNOS5410"
+	bool "Samsung Exynos5410"
 	default y
 	depends on ARCH_EXYNOS5
 
 config SOC_EXYNOS5420
-	bool "SAMSUNG EXYNOS5420"
+	bool "Samsung Exynos5420"
 	default y
 	depends on ARCH_EXYNOS5
 	select EXYNOS_MCPM if SMP
@@ -116,7 +115,7 @@ config SOC_EXYNOS5420
 	select ARM_CPU_SUSPEND
 
 config SOC_EXYNOS5800
-	bool "SAMSUNG EXYNOS5800"
+	bool "Samsung EXYNOS5800"
 	default y
 	depends on SOC_EXYNOS5420
 
diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
index 56411bb63d45..afd988a92836 100644
--- a/arch/arm/mach-exynos/common.h
+++ b/arch/arm/mach-exynos/common.h
@@ -3,7 +3,7 @@
  * Copyright (c) 2011 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
  *
- * Common Header for EXYNOS machines
+ * Common Header for Exynos machines
  */
 
 #ifndef __ARCH_ARM_MACH_EXYNOS_COMMON_H
diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
index 9aa483366ebc..7a8d1555db40 100644
--- a/arch/arm/mach-exynos/exynos.c
+++ b/arch/arm/mach-exynos/exynos.c
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 //
-// SAMSUNG EXYNOS Flattened Device Tree enabled machine
+// Samsung Exynos Flattened Device Tree enabled machine
 //
 // Copyright (c) 2010-2014 Samsung Electronics Co., Ltd.
 //		http://www.samsung.com
@@ -192,7 +192,7 @@ static void __init exynos_dt_fixup(void)
 	of_fdt_limit_memory(8);
 }
 
-DT_MACHINE_START(EXYNOS_DT, "SAMSUNG EXYNOS (Flattened Device Tree)")
+DT_MACHINE_START(EXYNOS_DT, "Samsung Exynos (Flattened Device Tree)")
 	.l2c_aux_val	= 0x3c400001,
 	.l2c_aux_mask	= 0xc20fffff,
 	.smp		= smp_ops(exynos_smp_ops),
diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h
index 22ebe3654633..8d58faa54ff7 100644
--- a/arch/arm/mach-exynos/include/mach/map.h
+++ b/arch/arm/mach-exynos/include/mach/map.h
@@ -3,7 +3,7 @@
  * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com/
  *
- * EXYNOS - Memory map definitions
+ * Exynos - Memory map definitions
  */
 
 #ifndef __ASM_ARCH_MAP_H
diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c
index 48e7fb38613e..78af34cc89cc 100644
--- a/arch/arm/mach-exynos/pm.c
+++ b/arch/arm/mach-exynos/pm.c
@@ -3,7 +3,7 @@
 // Copyright (c) 2011-2014 Samsung Electronics Co., Ltd.
 //		http://www.samsung.com
 //
-// EXYNOS - Power Management support
+// Exynos - Power Management support
 //
 // Based on arch/arm/mach-s3c2410/pm.c
 // Copyright (c) 2006 Simtec Electronics
diff --git a/arch/arm/mach-exynos/smc.h b/arch/arm/mach-exynos/smc.h
index 98832e50852d..5c30feb8f07d 100644
--- a/arch/arm/mach-exynos/smc.h
+++ b/arch/arm/mach-exynos/smc.h
@@ -2,7 +2,7 @@
 /*
  *  Copyright (c) 2012 Samsung Electronics.
  *
- * EXYNOS - SMC Call
+ * Exynos - SMC Call
  */
 
 #ifndef __ASM_ARCH_EXYNOS_SMC_H
diff --git a/arch/arm/mach-exynos/suspend.c b/arch/arm/mach-exynos/suspend.c
index 6a0d3448ea00..3bf14ca78b62 100644
--- a/arch/arm/mach-exynos/suspend.c
+++ b/arch/arm/mach-exynos/suspend.c
@@ -3,7 +3,7 @@
 // Copyright (c) 2011-2014 Samsung Electronics Co., Ltd.
 //		http://www.samsung.com
 //
-// EXYNOS - Suspend support
+// Exynos - Suspend support
 //
 // Based on arch/arm/mach-s3c2410/pm.c
 // Copyright (c) 2006 Simtec Electronics
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 593bf1519608..95584ee02b55 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -520,6 +520,7 @@ config SOC_IMX6UL
 	bool "i.MX6 UltraLite support"
 	select PINCTRL_IMX6UL
 	select SOC_IMX6
+	select ARM_ERRATA_814220
 
 	help
 	  This enables support for Freescale i.MX6 UltraLite processor.
@@ -556,6 +557,7 @@ config SOC_IMX7D
 	select PINCTRL_IMX7D
 	select SOC_IMX7D_CA7 if ARCH_MULTI_V7
 	select SOC_IMX7D_CM4 if ARM_SINGLE_ARMV7M
+	select ARM_ERRATA_814220 if ARCH_MULTI_V7
 	help
 		This enables support for Freescale i.MX7 Dual processor.
 
diff --git a/arch/arm/mach-imx/cpu.c b/arch/arm/mach-imx/cpu.c
index 871f98342d50..06f8d64b65af 100644
--- a/arch/arm/mach-imx/cpu.c
+++ b/arch/arm/mach-imx/cpu.c
@@ -15,6 +15,11 @@
 #define OCOTP_UID_H	0x420
 #define OCOTP_UID_L	0x410
 
+#define OCOTP_ULP_UID_1		0x4b0
+#define OCOTP_ULP_UID_2		0x4c0
+#define OCOTP_ULP_UID_3		0x4d0
+#define OCOTP_ULP_UID_4		0x4e0
+
 unsigned int __mxc_cpu_type;
 static unsigned int imx_soc_revision;
 
@@ -164,6 +169,7 @@ struct device * __init imx_soc_device_init(void)
 		soc_id = "i.MX7D";
 		break;
 	case MXC_CPU_IMX7ULP:
+		ocotp_compat = "fsl,imx7ulp-ocotp";
 		soc_id = "i.MX7ULP";
 		break;
 	default:
@@ -178,11 +184,25 @@ struct device * __init imx_soc_device_init(void)
 	}
 
 	if (!IS_ERR_OR_NULL(ocotp)) {
-		regmap_read(ocotp, OCOTP_UID_H, &val);
-		soc_uid = val;
-		regmap_read(ocotp, OCOTP_UID_L, &val);
-		soc_uid <<= 32;
-		soc_uid |= val;
+		if (__mxc_cpu_type == MXC_CPU_IMX7ULP) {
+			regmap_read(ocotp, OCOTP_ULP_UID_4, &val);
+			soc_uid = val & 0xffff;
+			regmap_read(ocotp, OCOTP_ULP_UID_3, &val);
+			soc_uid <<= 16;
+			soc_uid |= val & 0xffff;
+			regmap_read(ocotp, OCOTP_ULP_UID_2, &val);
+			soc_uid <<= 16;
+			soc_uid |= val & 0xffff;
+			regmap_read(ocotp, OCOTP_ULP_UID_1, &val);
+			soc_uid <<= 16;
+			soc_uid |= val & 0xffff;
+		} else {
+			regmap_read(ocotp, OCOTP_UID_H, &val);
+			soc_uid = val;
+			regmap_read(ocotp, OCOTP_UID_L, &val);
+			soc_uid <<= 32;
+			soc_uid |= val;
+		}
 	}
 
 	soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%d.%d",
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index f07cfda85156..e1135b9d67c6 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -16,11 +16,11 @@ hwmod-common				= omap_hwmod.o omap_hwmod_reset.o \
 clock-common				= clock.o
 secure-common				= omap-smc.o omap-secure.o
 
-obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
+obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common) $(secure-common)
 obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common)
 obj-$(CONFIG_ARCH_OMAP4) += $(hwmod-common) $(secure-common)
-obj-$(CONFIG_SOC_AM33XX) += $(hwmod-common)
-obj-$(CONFIG_SOC_OMAP5)	 += $(hwmod-common) $(secure-common)
+obj-$(CONFIG_SOC_AM33XX) += $(hwmod-common) $(secure-common)
+obj-$(CONFIG_SOC_OMAP5)  += $(hwmod-common) $(secure-common)
 obj-$(CONFIG_SOC_AM43XX) += $(hwmod-common) $(secure-common)
 obj-$(CONFIG_SOC_DRA7XX) += $(hwmod-common) $(secure-common)
 
diff --git a/arch/arm/mach-omap2/clockdomains43xx_data.c b/arch/arm/mach-omap2/clockdomains43xx_data.c
index 751708d727af..c96a2b1efbad 100644
--- a/arch/arm/mach-omap2/clockdomains43xx_data.c
+++ b/arch/arm/mach-omap2/clockdomains43xx_data.c
@@ -84,6 +84,15 @@ static struct clockdomain l3s_tsc_43xx_clkdm = {
 	.flags		  = CLKDM_CAN_SWSUP,
 };
 
+static struct clockdomain lcdc_43xx_clkdm = {
+	.name		  = "lcdc_clkdm",
+	.pwrdm		  = { .name = "per_pwrdm" },
+	.prcm_partition	  = AM43XX_CM_PARTITION,
+	.cm_inst	  = AM43XX_CM_PER_INST,
+	.clkdm_offs	  = AM43XX_CM_PER_LCDC_CDOFFS,
+	.flags		  = CLKDM_CAN_SWSUP,
+};
+
 static struct clockdomain dss_43xx_clkdm = {
 	.name		  = "dss_clkdm",
 	.pwrdm		  = { .name = "per_pwrdm" },
@@ -173,6 +182,7 @@ static struct clockdomain *clockdomains_am43xx[] __initdata = {
 	&pruss_ocp_43xx_clkdm,
 	&ocpwp_l3_43xx_clkdm,
 	&l3s_tsc_43xx_clkdm,
+	&lcdc_43xx_clkdm,
 	&dss_43xx_clkdm,
 	&l3_aon_43xx_clkdm,
 	&emif_43xx_clkdm,
diff --git a/arch/arm/mach-omap2/clockdomains7xx_data.c b/arch/arm/mach-omap2/clockdomains7xx_data.c
index 3068802824b7..27835c4d1aa9 100644
--- a/arch/arm/mach-omap2/clockdomains7xx_data.c
+++ b/arch/arm/mach-omap2/clockdomains7xx_data.c
@@ -606,7 +606,7 @@ static struct clockdomain cam_7xx_clkdm = {
 	.dep_bit	  = DRA7XX_CAM_STATDEP_SHIFT,
 	.wkdep_srcs	  = cam_wkup_sleep_deps,
 	.sleepdep_srcs	  = cam_wkup_sleep_deps,
-	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+	.flags		  = CLKDM_CAN_SWSUP,
 };
 
 static struct clockdomain l4per_7xx_clkdm = {
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index 223b37c48389..75d729943958 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -255,7 +255,7 @@ extern void gic_dist_disable(void);
 extern void gic_dist_enable(void);
 extern bool gic_dist_disabled(void);
 extern void gic_timer_retrigger(void);
-extern void omap_smc1(u32 fn, u32 arg);
+extern void _omap_smc1(u32 fn, u32 arg);
 extern void omap4_sar_ram_init(void);
 extern void __iomem *omap4_get_sar_ram_base(void);
 extern void omap4_mpuss_early_init(void);
@@ -345,9 +345,12 @@ static inline int dra7xx_pciess_reset(struct omap_hwmod *oh)
 }
 #endif
 
+struct omap_system_dma_plat_info;
+
 void pdata_quirks_init(const struct of_device_id *);
 void omap_auxdata_legacy_init(struct device *dev);
 void omap_pcs_legacy_init(int irq, void (*rearm)(void));
+extern struct omap_system_dma_plat_info dma_plat_info;
 
 struct omap_sdrc_params;
 extern void omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c
index 0c105baa5e88..8cc109cc242a 100644
--- a/arch/arm/mach-omap2/dma.c
+++ b/arch/arm/mach-omap2/dma.c
@@ -30,10 +30,6 @@
 #include <linux/omap-dma.h>
 
 #include "soc.h"
-#include "omap_hwmod.h"
-#include "omap_device.h"
-
-static enum omap_reg_offsets dma_common_ch_end;
 
 static const struct omap_dma_reg reg_map[] = {
 	[REVISION]	= { 0x0000, 0x00, OMAP_DMA_REG_32BIT },
@@ -81,42 +77,6 @@ static const struct omap_dma_reg reg_map[] = {
 	[CCDN]		= { 0x00d8, 0x60, OMAP_DMA_REG_32BIT },
 };
 
-static void __iomem *dma_base;
-static inline void dma_write(u32 val, int reg, int lch)
-{
-	void __iomem *addr = dma_base;
-
-	addr += reg_map[reg].offset;
-	addr += reg_map[reg].stride * lch;
-
-	writel_relaxed(val, addr);
-}
-
-static inline u32 dma_read(int reg, int lch)
-{
-	void __iomem *addr = dma_base;
-
-	addr += reg_map[reg].offset;
-	addr += reg_map[reg].stride * lch;
-
-	return readl_relaxed(addr);
-}
-
-static void omap2_clear_dma(int lch)
-{
-	int i;
-
-	for (i = CSDP; i <= dma_common_ch_end; i += 1)
-		dma_write(0, i, lch);
-}
-
-static void omap2_show_dma_caps(void)
-{
-	u8 revision = dma_read(REVISION, 0) & 0xff;
-	printk(KERN_INFO "OMAP DMA hardware revision %d.%d\n",
-				revision >> 4, revision & 0xf);
-}
-
 static unsigned configure_dma_errata(void)
 {
 	unsigned errata = 0;
@@ -211,82 +171,35 @@ static const struct dma_slave_map omap24xx_sdma_dt_map[] = {
 	{ "musb-hdrc.1.auto", "dmareq5", SDMA_FILTER_PARAM(64) }, /* OMAP2420 only */
 };
 
-static struct omap_system_dma_plat_info dma_plat_info __initdata = {
-	.reg_map	= reg_map,
-	.channel_stride	= 0x60,
-	.show_dma_caps	= omap2_show_dma_caps,
-	.clear_dma	= omap2_clear_dma,
-	.dma_write	= dma_write,
-	.dma_read	= dma_read,
+static struct omap_dma_dev_attr dma_attr = {
+	.dev_caps = RESERVE_CHANNEL | DMA_LINKED_LCH | GLOBAL_PRIORITY |
+		    IS_CSSA_32 | IS_CDSA_32,
+	.lch_count = 32,
 };
 
-static struct platform_device_info omap_dma_dev_info __initdata = {
-	.name = "omap-dma-engine",
-	.id = -1,
-	.dma_mask = DMA_BIT_MASK(32),
+struct omap_system_dma_plat_info dma_plat_info = {
+	.reg_map	= reg_map,
+	.channel_stride	= 0x60,
+	.dma_attr	= &dma_attr,
 };
 
 /* One time initializations */
-static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused)
+static int __init omap2_system_dma_init(void)
 {
-	struct platform_device			*pdev;
-	struct omap_system_dma_plat_info	p;
-	struct omap_dma_dev_attr		*d;
-	struct resource				*mem;
-	char					*name = "omap_dma_system";
-
-	p = dma_plat_info;
-	p.dma_attr = (struct omap_dma_dev_attr *)oh->dev_attr;
-	p.errata = configure_dma_errata();
+	dma_plat_info.errata = configure_dma_errata();
 
 	if (soc_is_omap24xx()) {
 		/* DMA slave map for drivers not yet converted to DT */
-		p.slave_map = omap24xx_sdma_dt_map;
-		p.slavecnt = ARRAY_SIZE(omap24xx_sdma_dt_map);
+		dma_plat_info.slave_map = omap24xx_sdma_dt_map;
+		dma_plat_info.slavecnt = ARRAY_SIZE(omap24xx_sdma_dt_map);
 	}
 
-	pdev = omap_device_build(name, 0, oh, &p, sizeof(p));
-	if (IS_ERR(pdev)) {
-		pr_err("%s: Can't build omap_device for %s:%s.\n",
-			__func__, name, oh->name);
-		return PTR_ERR(pdev);
-	}
-
-	omap_dma_dev_info.res = pdev->resource;
-	omap_dma_dev_info.num_res = pdev->num_resources;
+	if (!soc_is_omap242x())
+		dma_attr.dev_caps |= IS_RW_PRIORITY;
 
-	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!mem) {
-		dev_err(&pdev->dev, "%s: no mem resource\n", __func__);
-		return -EINVAL;
-	}
-
-	dma_base = ioremap(mem->start, resource_size(mem));
-	if (!dma_base) {
-		dev_err(&pdev->dev, "%s: ioremap fail\n", __func__);
-		return -ENOMEM;
-	}
-
-	d = oh->dev_attr;
-
-	if (cpu_is_omap34xx() && (omap_type() != OMAP2_DEVICE_TYPE_GP))
-		d->dev_caps |= HS_CHANNELS_RESERVED;
-
-	if (platform_get_irq_byname(pdev, "0") < 0)
-		d->dev_caps |= DMA_ENGINE_HANDLE_IRQ;
-
-	/* Check the capabilities register for descriptor loading feature */
-	if (dma_read(CAPS_0, 0) & DMA_HAS_DESCRIPTOR_CAPS)
-		dma_common_ch_end = CCDN;
-	else
-		dma_common_ch_end = CCFN;
+	if (soc_is_omap34xx() && (omap_type() != OMAP2_DEVICE_TYPE_GP))
+		dma_attr.dev_caps |= HS_CHANNELS_RESERVED;
 
 	return 0;
 }
-
-static int __init omap2_system_dma_init(void)
-{
-	return omap_hwmod_for_each_by_class("dma",
-			omap2_system_dma_init_dev, NULL);
-}
 omap_arch_initcall(omap2_system_dma_init);
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 349e48042982..f28047233665 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -51,6 +51,7 @@
 #include "prm33xx.h"
 #include "prm44xx.h"
 #include "opp2xxx.h"
+#include "omap-secure.h"
 
 /*
  * omap_clk_soc_init: points to a function that does the SoC-specific
@@ -430,6 +431,7 @@ void __init omap2420_init_early(void)
 	omap_hwmod_init_postsetup();
 	omap_clk_soc_init = omap2420_dt_clk_init;
 	rate_table = omap2420_rate_table;
+	omap_secure_init();
 }
 
 void __init omap2420_init_late(void)
@@ -454,6 +456,7 @@ void __init omap2430_init_early(void)
 	omap_hwmod_init_postsetup();
 	omap_clk_soc_init = omap2430_dt_clk_init;
 	rate_table = omap2430_rate_table;
+	omap_secure_init();
 }
 
 void __init omap2430_init_late(void)
@@ -481,6 +484,7 @@ void __init omap3_init_early(void)
 	omap3xxx_clockdomains_init();
 	omap3xxx_hwmod_init();
 	omap_hwmod_init_postsetup();
+	omap_secure_init();
 }
 
 void __init omap3430_init_early(void)
@@ -533,6 +537,7 @@ void __init ti814x_init_early(void)
 	dm814x_hwmod_init();
 	omap_hwmod_init_postsetup();
 	omap_clk_soc_init = dm814x_dt_clk_init;
+	omap_secure_init();
 }
 
 void __init ti816x_init_early(void)
@@ -549,6 +554,7 @@ void __init ti816x_init_early(void)
 	dm816x_hwmod_init();
 	omap_hwmod_init_postsetup();
 	omap_clk_soc_init = dm816x_dt_clk_init;
+	omap_secure_init();
 }
 #endif
 
@@ -566,6 +572,7 @@ void __init am33xx_init_early(void)
 	am33xx_hwmod_init();
 	omap_hwmod_init_postsetup();
 	omap_clk_soc_init = am33xx_dt_clk_init;
+	omap_secure_init();
 }
 
 void __init am33xx_init_late(void)
@@ -589,6 +596,7 @@ void __init am43xx_init_early(void)
 	omap_hwmod_init_postsetup();
 	omap_l2_cache_init();
 	omap_clk_soc_init = am43xx_dt_clk_init;
+	omap_secure_init();
 }
 
 void __init am43xx_init_late(void)
@@ -617,6 +625,7 @@ void __init omap4430_init_early(void)
 	omap_hwmod_init_postsetup();
 	omap_l2_cache_init();
 	omap_clk_soc_init = omap4xxx_dt_clk_init;
+	omap_secure_init();
 }
 
 void __init omap4430_init_late(void)
@@ -643,6 +652,7 @@ void __init omap5_init_early(void)
 	omap54xx_hwmod_init();
 	omap_hwmod_init_postsetup();
 	omap_clk_soc_init = omap5xxx_dt_clk_init;
+	omap_secure_init();
 }
 
 void __init omap5_init_late(void)
@@ -666,6 +676,7 @@ void __init dra7xx_init_early(void)
 	dra7xx_hwmod_init();
 	omap_hwmod_init_postsetup();
 	omap_clk_soc_init = dra7xx_dt_clk_init;
+	omap_secure_init();
 }
 
 void __init dra7xx_init_late(void)
diff --git a/arch/arm/mach-omap2/omap-iommu.c b/arch/arm/mach-omap2/omap-iommu.c
index f1a6ece8108e..54aff33e55e6 100644
--- a/arch/arm/mach-omap2/omap-iommu.c
+++ b/arch/arm/mach-omap2/omap-iommu.c
@@ -8,36 +8,134 @@
 
 #include <linux/platform_device.h>
 #include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/list.h>
 
-#include "omap_hwmod.h"
-#include "omap_device.h"
+#include "clockdomain.h"
 #include "powerdomain.h"
 
+struct pwrdm_link {
+	struct device *dev;
+	struct powerdomain *pwrdm;
+	struct list_head node;
+};
+
+static DEFINE_SPINLOCK(iommu_lock);
+static struct clockdomain *emu_clkdm;
+static atomic_t emu_count;
+
+static void omap_iommu_dra7_emu_swsup_config(struct platform_device *pdev,
+					     bool enable)
+{
+	struct device_node *np = pdev->dev.of_node;
+	unsigned long flags;
+
+	if (!of_device_is_compatible(np, "ti,dra7-dsp-iommu"))
+		return;
+
+	if (!emu_clkdm) {
+		emu_clkdm = clkdm_lookup("emu_clkdm");
+		if (WARN_ON_ONCE(!emu_clkdm))
+			return;
+	}
+
+	spin_lock_irqsave(&iommu_lock, flags);
+
+	if (enable && (atomic_inc_return(&emu_count) == 1))
+		clkdm_deny_idle(emu_clkdm);
+	else if (!enable && (atomic_dec_return(&emu_count) == 0))
+		clkdm_allow_idle(emu_clkdm);
+
+	spin_unlock_irqrestore(&iommu_lock, flags);
+}
+
+static struct powerdomain *_get_pwrdm(struct device *dev)
+{
+	struct clk *clk;
+	struct clk_hw_omap *hwclk;
+	struct clockdomain *clkdm;
+	struct powerdomain *pwrdm = NULL;
+	struct pwrdm_link *entry;
+	unsigned long flags;
+	static LIST_HEAD(cache);
+
+	spin_lock_irqsave(&iommu_lock, flags);
+
+	list_for_each_entry(entry, &cache, node) {
+		if (entry->dev == dev) {
+			pwrdm = entry->pwrdm;
+			break;
+		}
+	}
+
+	spin_unlock_irqrestore(&iommu_lock, flags);
+
+	if (pwrdm)
+		return pwrdm;
+
+	clk = of_clk_get(dev->of_node->parent, 0);
+	if (!clk) {
+		dev_err(dev, "no fck found\n");
+		return NULL;
+	}
+
+	hwclk = to_clk_hw_omap(__clk_get_hw(clk));
+	clk_put(clk);
+	if (!hwclk || !hwclk->clkdm_name) {
+		dev_err(dev, "no hwclk data\n");
+		return NULL;
+	}
+
+	clkdm = clkdm_lookup(hwclk->clkdm_name);
+	if (!clkdm) {
+		dev_err(dev, "clkdm not found: %s\n", hwclk->clkdm_name);
+		return NULL;
+	}
+
+	pwrdm = clkdm_get_pwrdm(clkdm);
+	if (!pwrdm) {
+		dev_err(dev, "pwrdm not found: %s\n", clkdm->name);
+		return NULL;
+	}
+
+	entry = kmalloc(sizeof(*entry), GFP_KERNEL);
+	if (entry) {
+		entry->dev = dev;
+		entry->pwrdm = pwrdm;
+		spin_lock_irqsave(&iommu_lock, flags);
+		list_add(&entry->node, &cache);
+		spin_unlock_irqrestore(&iommu_lock, flags);
+	}
+
+	return pwrdm;
+}
+
 int omap_iommu_set_pwrdm_constraint(struct platform_device *pdev, bool request,
 				    u8 *pwrst)
 {
 	struct powerdomain *pwrdm;
-	struct omap_device *od;
 	u8 next_pwrst;
+	int ret = 0;
 
-	od = to_omap_device(pdev);
-	if (!od)
-		return -ENODEV;
-
-	if (od->hwmods_cnt != 1)
-		return -EINVAL;
-
-	pwrdm = omap_hwmod_get_pwrdm(od->hwmods[0]);
+	pwrdm = _get_pwrdm(&pdev->dev);
 	if (!pwrdm)
-		return -EINVAL;
+		return -ENODEV;
 
-	if (request)
+	if (request) {
 		*pwrst = pwrdm_read_next_pwrst(pwrdm);
+		omap_iommu_dra7_emu_swsup_config(pdev, true);
+	}
 
 	if (*pwrst > PWRDM_POWER_RET)
-		return 0;
+		goto out;
 
 	next_pwrst = request ? PWRDM_POWER_ON : *pwrst;
 
-	return pwrdm_set_next_pwrst(pwrdm, next_pwrst);
+	ret = pwrdm_set_next_pwrst(pwrdm, next_pwrst);
+
+out:
+	if (!request)
+		omap_iommu_dra7_emu_swsup_config(pdev, false);
+
+	return ret;
 }
diff --git a/arch/arm/mach-omap2/omap-secure.c b/arch/arm/mach-omap2/omap-secure.c
index 24298e47b9f1..d00e3c72e37d 100644
--- a/arch/arm/mach-omap2/omap-secure.c
+++ b/arch/arm/mach-omap2/omap-secure.c
@@ -8,18 +8,42 @@
  * Copyright (C) 2013 Pali Rohár <pali.rohar@gmail.com>
  */
 
+#include <linux/arm-smccc.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/memblock.h>
+#include <linux/of.h>
 
 #include <asm/cacheflush.h>
 #include <asm/memblock.h>
 
+#include "common.h"
 #include "omap-secure.h"
 
 static phys_addr_t omap_secure_memblock_base;
 
+bool optee_available;
+
+#define OMAP_SIP_SMC_STD_CALL_VAL(func_num) \
+	ARM_SMCCC_CALL_VAL(ARM_SMCCC_STD_CALL, ARM_SMCCC_SMC_32, \
+	ARM_SMCCC_OWNER_SIP, (func_num))
+
+static void __init omap_optee_init_check(void)
+{
+	struct device_node *np;
+
+	/*
+	 * We only check that the OP-TEE node is present and available. The
+	 * OP-TEE kernel driver is not needed for the type of interaction made
+	 * with OP-TEE here so the driver's status is not checked.
+	 */
+	np = of_find_node_by_path("/firmware/optee");
+	if (np && of_device_is_available(np))
+		optee_available = true;
+	of_node_put(np);
+}
+
 /**
  * omap_sec_dispatcher: Routine to dispatch low power secure
  * service routines
@@ -53,6 +77,27 @@ u32 omap_secure_dispatcher(u32 idx, u32 flag, u32 nargs, u32 arg1, u32 arg2,
 	return ret;
 }
 
+void omap_smccc_smc(u32 fn, u32 arg)
+{
+	struct arm_smccc_res res;
+
+	arm_smccc_smc(OMAP_SIP_SMC_STD_CALL_VAL(fn), arg,
+		      0, 0, 0, 0, 0, 0, &res);
+	WARN(res.a0, "Secure function call 0x%08x failed\n", fn);
+}
+
+void omap_smc1(u32 fn, u32 arg)
+{
+	/*
+	 * If this platform has OP-TEE installed we use ARM SMC calls
+	 * otherwise fall back to the OMAP ROM style calls.
+	 */
+	if (optee_available)
+		omap_smccc_smc(fn, arg);
+	else
+		_omap_smc1(fn, arg);
+}
+
 /* Allocate the memory to save secure ram */
 int __init omap_secure_ram_reserve_memblock(void)
 {
@@ -163,3 +208,8 @@ u32 rx51_secure_rng_call(u32 ptr, u32 count, u32 flag)
 				      NO_FLAG,
 				      3, ptr, count, flag, 0);
 }
+
+void __init omap_secure_init(void)
+{
+	omap_optee_init_check();
+}
diff --git a/arch/arm/mach-omap2/omap-secure.h b/arch/arm/mach-omap2/omap-secure.h
index 20046e8f8ecb..ba8c486c0454 100644
--- a/arch/arm/mach-omap2/omap-secure.h
+++ b/arch/arm/mach-omap2/omap-secure.h
@@ -10,6 +10,8 @@
 #ifndef OMAP_ARCH_OMAP_SECURE_H
 #define OMAP_ARCH_OMAP_SECURE_H
 
+#include <linux/types.h>
+
 /* Monitor error code */
 #define  API_HAL_RET_VALUE_NS2S_CONVERSION_ERROR	0xFFFFFFFE
 #define  API_HAL_RET_VALUE_SERVICE_UNKNWON		0xFFFFFFFF
@@ -51,6 +53,9 @@
 #define OMAP4_PPA_L2_POR_INDEX		0x23
 #define OMAP4_PPA_CPU_ACTRL_SMP_INDEX	0x25
 
+#define AM43xx_PPA_SVC_PM_SUSPEND	0x71
+#define AM43xx_PPA_SVC_PM_RESUME	0x72
+
 /* Secure RX-51 PPA (Primary Protected Application) APIs */
 #define RX51_PPA_HWRNG			29
 #define RX51_PPA_L2_INVAL		40
@@ -60,6 +65,8 @@
 
 extern u32 omap_secure_dispatcher(u32 idx, u32 flag, u32 nargs,
 				u32 arg1, u32 arg2, u32 arg3, u32 arg4);
+extern void omap_smccc_smc(u32 fn, u32 arg);
+extern void omap_smc1(u32 fn, u32 arg);
 extern u32 omap_smc2(u32 id, u32 falg, u32 pargs);
 extern u32 omap_smc3(u32 id, u32 process, u32 flag, u32 pargs);
 extern phys_addr_t omap_secure_ram_mempool_base(void);
@@ -72,6 +79,9 @@ extern u32 rx51_secure_dispatcher(u32 idx, u32 process, u32 flag, u32 nargs,
 extern u32 rx51_secure_update_aux_cr(u32 set_bits, u32 clear_bits);
 extern u32 rx51_secure_rng_call(u32 ptr, u32 count, u32 flag);
 
+extern bool optee_available;
+void omap_secure_init(void);
+
 #ifdef CONFIG_SOC_HAS_REALTIME_COUNTER
 void set_cntfreq(void);
 #else
diff --git a/arch/arm/mach-omap2/omap-smc.S b/arch/arm/mach-omap2/omap-smc.S
index fd2bcd91f4a1..d4832845a4e8 100644
--- a/arch/arm/mach-omap2/omap-smc.S
+++ b/arch/arm/mach-omap2/omap-smc.S
@@ -18,18 +18,18 @@
  * the monitor API number. It uses few CPU registers
  * internally and hence they need be backed up including
  * link register "lr".
- * Function signature : void omap_smc1(u32 fn, u32 arg)
+ * Function signature : void _omap_smc1(u32 fn, u32 arg)
  */
 	.arch armv7-a
 	.arch_extension sec
-ENTRY(omap_smc1)
+ENTRY(_omap_smc1)
 	stmfd   sp!, {r2-r12, lr}
 	mov	r12, r0
 	mov 	r0, r1
 	dsb
 	smc	#0
 	ldmfd   sp!, {r2-r12, pc}
-ENDPROC(omap_smc1)
+ENDPROC(_omap_smc1)
 
 /**
  * u32 omap_smc2(u32 id, u32 falg, u32 pargs)
diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c
index 1d55602b3f8f..6b4548f3b57f 100644
--- a/arch/arm/mach-omap2/omap_device.c
+++ b/arch/arm/mach-omap2/omap_device.c
@@ -373,176 +373,6 @@ void omap_device_delete(struct omap_device *od)
 	kfree(od);
 }
 
-/**
- * omap_device_copy_resources - Add legacy IO and IRQ resources
- * @oh: interconnect target module
- * @pdev: platform device to copy resources to
- *
- * We still have legacy DMA and smartreflex needing resources.
- * Let's populate what they need until we can eventually just
- * remove this function. Note that there should be no need to
- * call this from omap_device_build_from_dt(), nor should there
- * be any need to call it for other devices.
- */
-static int
-omap_device_copy_resources(struct omap_hwmod *oh,
-			   struct platform_device *pdev)
-{
-	struct device_node *np, *child;
-	struct property *prop;
-	struct resource *res;
-	const char *name;
-	int error, irq = 0;
-
-	if (!oh || !oh->od || !oh->od->pdev)
-		return -EINVAL;
-
-	np = oh->od->pdev->dev.of_node;
-	if (!np) {
-		error = -ENODEV;
-		goto error;
-	}
-
-	res = kcalloc(2, sizeof(*res), GFP_KERNEL);
-	if (!res)
-		return -ENOMEM;
-
-	/* Do we have a dts range for the interconnect target module? */
-	error = omap_hwmod_parse_module_range(oh, np, res);
-
-	/* No ranges, rely on device reg entry */
-	if (error)
-		error = of_address_to_resource(np, 0, res);
-	if (error)
-		goto free;
-
-	/* SmartReflex needs first IO resource name to be "mpu" */
-	res[0].name = "mpu";
-
-	/*
-	 * We may have a configured "ti,sysc" interconnect target with a
-	 * dts child with the interrupt. If so use the first child's
-	 * first interrupt for "ti-hwmods" legacy support.
-	 */
-	of_property_for_each_string(np, "compatible", prop, name)
-		if (!strncmp("ti,sysc-", name, 8))
-			break;
-
-	child = of_get_next_available_child(np, NULL);
-
-	if (name)
-		irq = irq_of_parse_and_map(child, 0);
-	if (!irq)
-		irq = irq_of_parse_and_map(np, 0);
-	if (!irq) {
-		error = -EINVAL;
-		goto free;
-	}
-
-	/* Legacy DMA code needs interrupt name to be "0" */
-	res[1].start = irq;
-	res[1].end = irq;
-	res[1].flags = IORESOURCE_IRQ;
-	res[1].name = "0";
-
-	error = platform_device_add_resources(pdev, res, 2);
-
-free:
-	kfree(res);
-
-error:
-	WARN(error, "%s: %s device %s failed: %i\n",
-	     __func__, oh->name, dev_name(&pdev->dev),
-	     error);
-
-	return error;
-}
-
-/**
- * omap_device_build - build and register an omap_device with one omap_hwmod
- * @pdev_name: name of the platform_device driver to use
- * @pdev_id: this platform_device's connection ID
- * @oh: ptr to the single omap_hwmod that backs this omap_device
- * @pdata: platform_data ptr to associate with the platform_device
- * @pdata_len: amount of memory pointed to by @pdata
- *
- * Convenience function for building and registering a single
- * omap_device record, which in turn builds and registers a
- * platform_device record.  See omap_device_build_ss() for more
- * information.  Returns ERR_PTR(-EINVAL) if @oh is NULL; otherwise,
- * passes along the return value of omap_device_build_ss().
- */
-struct platform_device __init *omap_device_build(const char *pdev_name,
-						 int pdev_id,
-						 struct omap_hwmod *oh,
-						 void *pdata, int pdata_len)
-{
-	int ret = -ENOMEM;
-	struct platform_device *pdev;
-	struct omap_device *od;
-
-	if (!oh || !pdev_name)
-		return ERR_PTR(-EINVAL);
-
-	if (!pdata && pdata_len > 0)
-		return ERR_PTR(-EINVAL);
-
-	if (strncmp(oh->name, "smartreflex", 11) &&
-	    strncmp(oh->name, "dma", 3)) {
-		pr_warn("%s need to update %s to probe with dt\na",
-			__func__, pdev_name);
-		ret = -ENODEV;
-		goto odbs_exit;
-	}
-
-	pdev = platform_device_alloc(pdev_name, pdev_id);
-	if (!pdev) {
-		ret = -ENOMEM;
-		goto odbs_exit;
-	}
-
-	/* Set the dev_name early to allow dev_xxx in omap_device_alloc */
-	if (pdev->id != -1)
-		dev_set_name(&pdev->dev, "%s.%d", pdev->name,  pdev->id);
-	else
-		dev_set_name(&pdev->dev, "%s", pdev->name);
-
-	/*
-	 * Must be called before omap_device_alloc() as oh->od
-	 * only contains the currently registered omap_device
-	 * and will get overwritten by omap_device_alloc().
-	 */
-	ret = omap_device_copy_resources(oh, pdev);
-	if (ret)
-		goto odbs_exit1;
-
-	od = omap_device_alloc(pdev, &oh, 1);
-	if (IS_ERR(od)) {
-		ret = PTR_ERR(od);
-		goto odbs_exit1;
-	}
-
-	ret = platform_device_add_data(pdev, pdata, pdata_len);
-	if (ret)
-		goto odbs_exit2;
-
-	ret = omap_device_register(pdev);
-	if (ret)
-		goto odbs_exit2;
-
-	return pdev;
-
-odbs_exit2:
-	omap_device_delete(od);
-odbs_exit1:
-	platform_device_put(pdev);
-odbs_exit:
-
-	pr_err("omap_device: %s: build failed (%d)\n", pdev_name, ret);
-
-	return ERR_PTR(ret);
-}
-
 #ifdef CONFIG_PM
 static int _od_runtime_suspend(struct device *dev)
 {
diff --git a/arch/arm/mach-omap2/omap_device.h b/arch/arm/mach-omap2/omap_device.h
index ced775e401cf..f77e76a7841a 100644
--- a/arch/arm/mach-omap2/omap_device.h
+++ b/arch/arm/mach-omap2/omap_device.h
@@ -68,10 +68,6 @@ int omap_device_idle(struct platform_device *pdev);
 
 /* Core code interface */
 
-struct platform_device *omap_device_build(const char *pdev_name, int pdev_id,
-					  struct omap_hwmod *oh, void *pdata,
-					  int pdata_len);
-
 struct omap_device *omap_device_alloc(struct platform_device *pdev,
 				      struct omap_hwmod **ohs, int oh_cnt);
 void omap_device_delete(struct omap_device *od);
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index a136788db839..17d337ed18be 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -1853,23 +1853,6 @@ static int _omap4_get_context_lost(struct omap_hwmod *oh)
 }
 
 /**
- * _enable_preprogram - Pre-program an IP block during the _enable() process
- * @oh: struct omap_hwmod *
- *
- * Some IP blocks (such as AESS) require some additional programming
- * after enable before they can enter idle.  If a function pointer to
- * do so is present in the hwmod data, then call it and pass along the
- * return value; otherwise, return 0.
- */
-static int _enable_preprogram(struct omap_hwmod *oh)
-{
-	if (!oh->class->enable_preprogram)
-		return 0;
-
-	return oh->class->enable_preprogram(oh);
-}
-
-/**
  * _enable - enable an omap_hwmod
  * @oh: struct omap_hwmod *
  *
@@ -1952,7 +1935,6 @@ static int _enable(struct omap_hwmod *oh)
 				_update_sysc_cache(oh);
 			_enable_sysc(oh);
 		}
-		r = _enable_preprogram(oh);
 	} else {
 		if (soc_ops.disable_module)
 			soc_ops.disable_module(oh);
diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h
index 2d0fd99d4713..eebf2fdf434c 100644
--- a/arch/arm/mach-omap2/omap_hwmod.h
+++ b/arch/arm/mach-omap2/omap_hwmod.h
@@ -501,7 +501,6 @@ struct omap_hwmod_omap4_prcm {
  * @sysc: device SYSCONFIG/SYSSTATUS register data
  * @pre_shutdown: ptr to fn to be executed immediately prior to device shutdown
  * @reset: ptr to fn to be executed in place of the standard hwmod reset fn
- * @enable_preprogram:  ptr to fn to be executed during device enable
  * @lock: ptr to fn to be executed to lock IP registers
  * @unlock: ptr to fn to be executed to unlock IP registers
  *
@@ -526,7 +525,6 @@ struct omap_hwmod_class {
 	struct omap_hwmod_class_sysconfig	*sysc;
 	int					(*pre_shutdown)(struct omap_hwmod *oh);
 	int					(*reset)(struct omap_hwmod *oh);
-	int					(*enable_preprogram)(struct omap_hwmod *oh);
 	void					(*lock)(struct omap_hwmod *oh);
 	void					(*unlock)(struct omap_hwmod *oh);
 };
@@ -662,7 +660,6 @@ const char *omap_hwmod_get_main_clk(struct omap_hwmod *oh);
  *
  */
 
-extern int omap_hwmod_aess_preprogram(struct omap_hwmod *oh);
 void omap_hwmod_rtc_unlock(struct omap_hwmod *oh);
 void omap_hwmod_rtc_lock(struct omap_hwmod *oh);
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
index d49df96b4052..b14442cf6179 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
@@ -11,7 +11,6 @@
  */
 
 #include <linux/platform_data/i2c-omap.h>
-#include <linux/omap-dma.h>
 
 #include "omap_hwmod.h"
 #include "l3_2xxx.h"
@@ -126,21 +125,6 @@ static struct omap_hwmod omap2420_i2c2_hwmod = {
 	.flags		= HWMOD_16BIT_REG,
 };
 
-/* dma attributes */
-static struct omap_dma_dev_attr dma_dev_attr = {
-	.dev_caps  = RESERVE_CHANNEL | DMA_LINKED_LCH | GLOBAL_PRIORITY |
-						IS_CSSA_32 | IS_CDSA_32,
-	.lch_count = 32,
-};
-
-static struct omap_hwmod omap2420_dma_system_hwmod = {
-	.name		= "dma",
-	.class		= &omap2xxx_dma_hwmod_class,
-	.main_clk	= "core_l3_ck",
-	.dev_attr	= &dma_dev_attr,
-	.flags		= HWMOD_NO_IDLEST,
-};
-
 /* mailbox */
 static struct omap_hwmod omap2420_mailbox_hwmod = {
 	.name		= "mailbox",
@@ -328,22 +312,6 @@ static struct omap_hwmod_ocp_if omap2420_l4_wkup__gpio4 = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* dma_system -> L3 */
-static struct omap_hwmod_ocp_if omap2420_dma_system__l3 = {
-	.master		= &omap2420_dma_system_hwmod,
-	.slave		= &omap2xxx_l3_main_hwmod,
-	.clk		= "core_l3_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_core -> dma_system */
-static struct omap_hwmod_ocp_if omap2420_l4_core__dma_system = {
-	.master		= &omap2xxx_l4_core_hwmod,
-	.slave		= &omap2420_dma_system_hwmod,
-	.clk		= "sdma_ick",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /* l4_core -> mailbox */
 static struct omap_hwmod_ocp_if omap2420_l4_core__mailbox = {
 	.master		= &omap2xxx_l4_core_hwmod,
@@ -435,8 +403,6 @@ static struct omap_hwmod_ocp_if *omap2420_hwmod_ocp_ifs[] __initdata = {
 	&omap2420_l4_wkup__gpio2,
 	&omap2420_l4_wkup__gpio3,
 	&omap2420_l4_wkup__gpio4,
-	&omap2420_dma_system__l3,
-	&omap2420_l4_core__dma_system,
 	&omap2420_l4_core__mailbox,
 	&omap2420_l4_core__mcbsp1,
 	&omap2420_l4_core__mcbsp2,
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
index c51ef84ff64d..41a37c74f9a6 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -12,7 +12,6 @@
 
 #include <linux/platform_data/i2c-omap.h>
 #include <linux/platform_data/hsmmc-omap.h>
-#include <linux/omap-dma.h>
 
 #include "omap_hwmod.h"
 #include "l3_2xxx.h"
@@ -121,21 +120,6 @@ static struct omap_hwmod omap2430_gpio5_hwmod = {
 	.class		= &omap2xxx_gpio_hwmod_class,
 };
 
-/* dma attributes */
-static struct omap_dma_dev_attr dma_dev_attr = {
-	.dev_caps  = RESERVE_CHANNEL | DMA_LINKED_LCH | GLOBAL_PRIORITY |
-				IS_CSSA_32 | IS_CDSA_32 | IS_RW_PRIORITY,
-	.lch_count = 32,
-};
-
-static struct omap_hwmod omap2430_dma_system_hwmod = {
-	.name		= "dma",
-	.class		= &omap2xxx_dma_hwmod_class,
-	.main_clk	= "core_l3_ck",
-	.dev_attr	= &dma_dev_attr,
-	.flags		= HWMOD_NO_IDLEST,
-};
-
 /* mailbox */
 static struct omap_hwmod omap2430_mailbox_hwmod = {
 	.name		= "mailbox",
@@ -508,22 +492,6 @@ static struct omap_hwmod_ocp_if omap2430_l4_core__gpio5 = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* dma_system -> L3 */
-static struct omap_hwmod_ocp_if omap2430_dma_system__l3 = {
-	.master		= &omap2430_dma_system_hwmod,
-	.slave		= &omap2xxx_l3_main_hwmod,
-	.clk		= "core_l3_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_core -> dma_system */
-static struct omap_hwmod_ocp_if omap2430_l4_core__dma_system = {
-	.master		= &omap2xxx_l4_core_hwmod,
-	.slave		= &omap2430_dma_system_hwmod,
-	.clk		= "sdma_ick",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /* l4_core -> mailbox */
 static struct omap_hwmod_ocp_if omap2430_l4_core__mailbox = {
 	.master		= &omap2xxx_l4_core_hwmod,
@@ -635,8 +603,6 @@ static struct omap_hwmod_ocp_if *omap2430_hwmod_ocp_ifs[] __initdata = {
 	&omap2430_l4_wkup__gpio3,
 	&omap2430_l4_wkup__gpio4,
 	&omap2430_l4_core__gpio5,
-	&omap2430_dma_system__l3,
-	&omap2430_l4_core__dma_system,
 	&omap2430_l4_core__mailbox,
 	&omap2430_l4_core__mcbsp1,
 	&omap2430_l4_core__mcbsp2,
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
index f767524d06b5..a445704d43d9 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
@@ -7,7 +7,6 @@
  */
 
 #include <linux/types.h>
-#include <linux/omap-dma.h>
 
 #include "omap_hwmod.h"
 #include "omap_hwmod_common_data.h"
@@ -95,23 +94,6 @@ struct omap_hwmod_class omap2xxx_gpio_hwmod_class = {
 	.sysc = &omap2xxx_gpio_sysc,
 };
 
-/* system dma */
-static struct omap_hwmod_class_sysconfig omap2xxx_dma_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x002c,
-	.syss_offs	= 0x0028,
-	.sysc_flags	= (SYSC_HAS_SOFTRESET | SYSC_HAS_MIDLEMODE |
-			   SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_EMUFREE |
-			   SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-struct omap_hwmod_class omap2xxx_dma_hwmod_class = {
-	.name	= "dma",
-	.sysc	= &omap2xxx_dma_sysc,
-};
-
 /*
  * 'mailbox' class
  * mailbox module allowing communication between the on-chip processors
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h
index 26e13d4fa19c..5ef76fe3f33d 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h
@@ -28,29 +28,13 @@ extern struct omap_hwmod_ocp_if am33xx_pruss__l3_main;
 extern struct omap_hwmod_ocp_if am33xx_gfx__l3_main;
 extern struct omap_hwmod_ocp_if am33xx_l3_main__gfx;
 extern struct omap_hwmod_ocp_if am33xx_l4_wkup__rtc;
-extern struct omap_hwmod_ocp_if am33xx_l4_per__dcan0;
-extern struct omap_hwmod_ocp_if am33xx_l4_per__dcan1;
-extern struct omap_hwmod_ocp_if am33xx_l4_ls__elm;
-extern struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss0;
-extern struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss1;
-extern struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss2;
 extern struct omap_hwmod_ocp_if am33xx_l3_s__gpmc;
-extern struct omap_hwmod_ocp_if am33xx_l4_ls__spinlock;
-extern struct omap_hwmod_ocp_if am33xx_l4_ls__mcspi0;
-extern struct omap_hwmod_ocp_if am33xx_l4_ls__mcspi1;
 extern struct omap_hwmod_ocp_if am33xx_l4_ls__timer2;
-extern struct omap_hwmod_ocp_if am33xx_l4_ls__timer3;
-extern struct omap_hwmod_ocp_if am33xx_l4_ls__timer4;
-extern struct omap_hwmod_ocp_if am33xx_l4_ls__timer5;
-extern struct omap_hwmod_ocp_if am33xx_l4_ls__timer6;
-extern struct omap_hwmod_ocp_if am33xx_l4_ls__timer7;
 extern struct omap_hwmod_ocp_if am33xx_l3_main__tpcc;
 extern struct omap_hwmod_ocp_if am33xx_l3_main__tptc0;
 extern struct omap_hwmod_ocp_if am33xx_l3_main__tptc1;
 extern struct omap_hwmod_ocp_if am33xx_l3_main__tptc2;
 extern struct omap_hwmod_ocp_if am33xx_l3_main__ocmc;
-extern struct omap_hwmod_ocp_if am33xx_l3_main__sha0;
-extern struct omap_hwmod_ocp_if am33xx_l3_main__aes0;
 
 extern struct omap_hwmod am33xx_l3_main_hwmod;
 extern struct omap_hwmod am33xx_l3_s_hwmod;
@@ -61,29 +45,13 @@ extern struct omap_hwmod am33xx_mpu_hwmod;
 extern struct omap_hwmod am33xx_pruss_hwmod;
 extern struct omap_hwmod am33xx_gfx_hwmod;
 extern struct omap_hwmod am33xx_prcm_hwmod;
-extern struct omap_hwmod am33xx_aes0_hwmod;
-extern struct omap_hwmod am33xx_sha0_hwmod;
 extern struct omap_hwmod am33xx_ocmcram_hwmod;
 extern struct omap_hwmod am33xx_smartreflex0_hwmod;
 extern struct omap_hwmod am33xx_smartreflex1_hwmod;
-extern struct omap_hwmod am33xx_dcan0_hwmod;
-extern struct omap_hwmod am33xx_dcan1_hwmod;
-extern struct omap_hwmod am33xx_elm_hwmod;
-extern struct omap_hwmod am33xx_epwmss0_hwmod;
-extern struct omap_hwmod am33xx_epwmss1_hwmod;
-extern struct omap_hwmod am33xx_epwmss2_hwmod;
 extern struct omap_hwmod am33xx_gpmc_hwmod;
 extern struct omap_hwmod am33xx_rtc_hwmod;
-extern struct omap_hwmod am33xx_spi0_hwmod;
-extern struct omap_hwmod am33xx_spi1_hwmod;
-extern struct omap_hwmod am33xx_spinlock_hwmod;
 extern struct omap_hwmod am33xx_timer1_hwmod;
 extern struct omap_hwmod am33xx_timer2_hwmod;
-extern struct omap_hwmod am33xx_timer3_hwmod;
-extern struct omap_hwmod am33xx_timer4_hwmod;
-extern struct omap_hwmod am33xx_timer5_hwmod;
-extern struct omap_hwmod am33xx_timer6_hwmod;
-extern struct omap_hwmod am33xx_timer7_hwmod;
 extern struct omap_hwmod am33xx_tpcc_hwmod;
 extern struct omap_hwmod am33xx_tptc0_hwmod;
 extern struct omap_hwmod am33xx_tptc1_hwmod;
@@ -94,7 +62,6 @@ extern struct omap_hwmod_class am33xx_l4_hwmod_class;
 extern struct omap_hwmod_class am33xx_wkup_m3_hwmod_class;
 extern struct omap_hwmod_class am33xx_control_hwmod_class;
 extern struct omap_hwmod_class am33xx_timer_hwmod_class;
-extern struct omap_hwmod_class am33xx_epwmss_hwmod_class;
 extern struct omap_hwmod_class am33xx_ehrpwm_hwmod_class;
 extern struct omap_hwmod_class am33xx_spi_hwmod_class;
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c
index 7123c455aaa9..ac7d5bb1a02f 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c
@@ -106,50 +106,6 @@ struct omap_hwmod_ocp_if am33xx_l4_wkup__rtc = {
 	.user		= OCP_USER_MPU,
 };
 
-/* l4 per/ls -> DCAN0 */
-struct omap_hwmod_ocp_if am33xx_l4_per__dcan0 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_dcan0_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4 per/ls -> DCAN1 */
-struct omap_hwmod_ocp_if am33xx_l4_per__dcan1 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_dcan1_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-struct omap_hwmod_ocp_if am33xx_l4_ls__elm = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_elm_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss0 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_epwmss0_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss1 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_epwmss1_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss2 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_epwmss2_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
 /* l3s cfg -> gpmc */
 struct omap_hwmod_ocp_if am33xx_l3_s__gpmc = {
 	.master		= &am33xx_l3_s_hwmod,
@@ -158,30 +114,6 @@ struct omap_hwmod_ocp_if am33xx_l3_s__gpmc = {
 	.user		= OCP_USER_MPU,
 };
 
-/* l4 ls -> spinlock */
-struct omap_hwmod_ocp_if am33xx_l4_ls__spinlock = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_spinlock_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-/* l4 ls -> mcspi0 */
-struct omap_hwmod_ocp_if am33xx_l4_ls__mcspi0 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_spi0_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-/* l4 ls -> mcspi1 */
-struct omap_hwmod_ocp_if am33xx_l4_ls__mcspi1 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_spi1_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
 /* l4 per -> timer2 */
 struct omap_hwmod_ocp_if am33xx_l4_ls__timer2 = {
 	.master		= &am33xx_l4_ls_hwmod,
@@ -190,46 +122,6 @@ struct omap_hwmod_ocp_if am33xx_l4_ls__timer2 = {
 	.user		= OCP_USER_MPU,
 };
 
-/* l4 per -> timer3 */
-struct omap_hwmod_ocp_if am33xx_l4_ls__timer3 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_timer3_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-/* l4 per -> timer4 */
-struct omap_hwmod_ocp_if am33xx_l4_ls__timer4 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_timer4_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-/* l4 per -> timer5 */
-struct omap_hwmod_ocp_if am33xx_l4_ls__timer5 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_timer5_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-/* l4 per -> timer6 */
-struct omap_hwmod_ocp_if am33xx_l4_ls__timer6 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_timer6_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-/* l4 per -> timer7 */
-struct omap_hwmod_ocp_if am33xx_l4_ls__timer7 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_timer7_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
 /* l3 main -> tpcc */
 struct omap_hwmod_ocp_if am33xx_l3_main__tpcc = {
 	.master		= &am33xx_l3_main_hwmod,
@@ -268,19 +160,3 @@ struct omap_hwmod_ocp_if am33xx_l3_main__ocmc = {
 	.slave		= &am33xx_ocmcram_hwmod,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
-
-/* l3 main -> sha0 HIB2 */
-struct omap_hwmod_ocp_if am33xx_l3_main__sha0 = {
-	.master		= &am33xx_l3_main_hwmod,
-	.slave		= &am33xx_sha0_hwmod,
-	.clk		= "sha0_fck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3 main -> AES0 HIB2 */
-struct omap_hwmod_ocp_if am33xx_l3_main__aes0 = {
-	.master		= &am33xx_l3_main_hwmod,
-	.slave		= &am33xx_aes0_hwmod,
-	.clk		= "aes0_fck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
index 2df8659612ef..78ec1bc8e3a1 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
@@ -213,57 +213,7 @@ struct omap_hwmod_class am33xx_emif_hwmod_class = {
 	.sysc		= &am33xx_emif_sysc,
 };
 
-/*
- * 'aes0' class
- */
-static struct omap_hwmod_class_sysconfig am33xx_aes0_sysc = {
-	.rev_offs	= 0x80,
-	.sysc_offs	= 0x84,
-	.syss_offs	= 0x88,
-	.sysc_flags	= SYSS_HAS_RESET_STATUS,
-};
-
-static struct omap_hwmod_class am33xx_aes0_hwmod_class = {
-	.name		= "aes0",
-	.sysc		= &am33xx_aes0_sysc,
-};
-
-struct omap_hwmod am33xx_aes0_hwmod = {
-	.name		= "aes",
-	.class		= &am33xx_aes0_hwmod_class,
-	.clkdm_name	= "l3_clkdm",
-	.main_clk	= "aes0_fck",
-	.prcm		= {
-		.omap4	= {
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* sha0 HIB2 (the 'P' (public) device) */
-static struct omap_hwmod_class_sysconfig am33xx_sha0_sysc = {
-	.rev_offs	= 0x100,
-	.sysc_offs	= 0x110,
-	.syss_offs	= 0x114,
-	.sysc_flags	= SYSS_HAS_RESET_STATUS,
-};
 
-static struct omap_hwmod_class am33xx_sha0_hwmod_class = {
-	.name		= "sha0",
-	.sysc		= &am33xx_sha0_sysc,
-};
-
-struct omap_hwmod am33xx_sha0_hwmod = {
-	.name		= "sham",
-	.class		= &am33xx_sha0_hwmod_class,
-	.clkdm_name	= "l3_clkdm",
-	.main_clk	= "l3_gclk",
-	.prcm		= {
-		.omap4	= {
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
 
 /* ocmcram */
 static struct omap_hwmod_class am33xx_ocmcram_hwmod_class = {
@@ -321,122 +271,6 @@ struct omap_hwmod_class am33xx_control_hwmod_class = {
 	.name		= "control",
 };
 
-/*
- * dcan class
- */
-static struct omap_hwmod_class am33xx_dcan_hwmod_class = {
-	.name = "d_can",
-};
-
-/* dcan0 */
-struct omap_hwmod am33xx_dcan0_hwmod = {
-	.name		= "d_can0",
-	.class		= &am33xx_dcan_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "dcan0_fck",
-	.prcm		= {
-		.omap4	= {
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* dcan1 */
-struct omap_hwmod am33xx_dcan1_hwmod = {
-	.name		= "d_can1",
-	.class		= &am33xx_dcan_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "dcan1_fck",
-	.prcm		= {
-		.omap4	= {
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* elm */
-static struct omap_hwmod_class_sysconfig am33xx_elm_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
-			SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
-			SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class am33xx_elm_hwmod_class = {
-	.name		= "elm",
-	.sysc		= &am33xx_elm_sysc,
-};
-
-struct omap_hwmod am33xx_elm_hwmod = {
-	.name		= "elm",
-	.class		= &am33xx_elm_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-	.prcm		= {
-		.omap4	= {
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* pwmss  */
-static struct omap_hwmod_class_sysconfig am33xx_epwmss_sysc = {
-	.rev_offs	= 0x0,
-	.sysc_offs	= 0x4,
-	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
-			MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type2,
-};
-
-struct omap_hwmod_class am33xx_epwmss_hwmod_class = {
-	.name		= "epwmss",
-	.sysc		= &am33xx_epwmss_sysc,
-};
-
-/* epwmss0 */
-struct omap_hwmod am33xx_epwmss0_hwmod = {
-	.name		= "epwmss0",
-	.class		= &am33xx_epwmss_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-	.prcm		= {
-		.omap4	= {
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* epwmss1 */
-struct omap_hwmod am33xx_epwmss1_hwmod = {
-	.name		= "epwmss1",
-	.class		= &am33xx_epwmss_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-	.prcm		= {
-		.omap4	= {
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* epwmss2 */
-struct omap_hwmod am33xx_epwmss2_hwmod = {
-	.name		= "epwmss2",
-	.class		= &am33xx_epwmss_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-	.prcm		= {
-		.omap4	= {
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
 
 /* gpmc */
 static struct omap_hwmod_class_sysconfig gpmc_sysc = {
@@ -501,83 +335,6 @@ struct omap_hwmod am33xx_rtc_hwmod = {
 	},
 };
 
-/* 'spi' class */
-static struct omap_hwmod_class_sysconfig am33xx_mcspi_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0110,
-	.syss_offs	= 0x0114,
-	.sysc_flags	= (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
-			  SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
-			  SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-struct omap_hwmod_class am33xx_spi_hwmod_class = {
-	.name		= "mcspi",
-	.sysc		= &am33xx_mcspi_sysc,
-};
-
-/* spi0 */
-struct omap_hwmod am33xx_spi0_hwmod = {
-	.name		= "spi0",
-	.class		= &am33xx_spi_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "dpll_per_m2_div4_ck",
-	.prcm		= {
-		.omap4	= {
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* spi1 */
-struct omap_hwmod am33xx_spi1_hwmod = {
-	.name		= "spi1",
-	.class		= &am33xx_spi_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "dpll_per_m2_div4_ck",
-	.prcm		= {
-		.omap4	= {
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/*
- * 'spinlock' class
- * spinlock provides hardware assistance for synchronizing the
- * processes running on multiple processors
- */
-
-static struct omap_hwmod_class_sysconfig am33xx_spinlock_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
-			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
-			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class am33xx_spinlock_hwmod_class = {
-	.name		= "spinlock",
-	.sysc		= &am33xx_spinlock_sysc,
-};
-
-struct omap_hwmod am33xx_spinlock_hwmod = {
-	.name		= "spinlock",
-	.class		= &am33xx_spinlock_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-	.prcm		= {
-		.omap4	= {
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
 /* 'timer 2-7' class */
 static struct omap_hwmod_class_sysconfig am33xx_timer_sysc = {
 	.rev_offs	= 0x0000,
@@ -636,66 +393,6 @@ struct omap_hwmod am33xx_timer2_hwmod = {
 	},
 };
 
-struct omap_hwmod am33xx_timer3_hwmod = {
-	.name		= "timer3",
-	.class		= &am33xx_timer_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "timer3_fck",
-	.prcm		= {
-		.omap4	= {
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-struct omap_hwmod am33xx_timer4_hwmod = {
-	.name		= "timer4",
-	.class		= &am33xx_timer_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "timer4_fck",
-	.prcm		= {
-		.omap4	= {
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-struct omap_hwmod am33xx_timer5_hwmod = {
-	.name		= "timer5",
-	.class		= &am33xx_timer_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "timer5_fck",
-	.prcm		= {
-		.omap4	= {
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-struct omap_hwmod am33xx_timer6_hwmod = {
-	.name		= "timer6",
-	.class		= &am33xx_timer_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "timer6_fck",
-	.prcm		= {
-		.omap4	= {
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-struct omap_hwmod am33xx_timer7_hwmod = {
-	.name		= "timer7",
-	.class		= &am33xx_timer_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "timer7_fck",
-	.prcm		= {
-		.omap4	= {
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
 /* tpcc */
 static struct omap_hwmod_class am33xx_tpcc_hwmod_class = {
 	.name		= "tpcc",
@@ -772,21 +469,7 @@ struct omap_hwmod am33xx_tptc2_hwmod = {
 
 static void omap_hwmod_am33xx_clkctrl(void)
 {
-	CLKCTRL(am33xx_dcan0_hwmod, AM33XX_CM_PER_DCAN0_CLKCTRL_OFFSET);
-	CLKCTRL(am33xx_dcan1_hwmod, AM33XX_CM_PER_DCAN1_CLKCTRL_OFFSET);
-	CLKCTRL(am33xx_elm_hwmod, AM33XX_CM_PER_ELM_CLKCTRL_OFFSET);
-	CLKCTRL(am33xx_epwmss0_hwmod, AM33XX_CM_PER_EPWMSS0_CLKCTRL_OFFSET);
-	CLKCTRL(am33xx_epwmss1_hwmod, AM33XX_CM_PER_EPWMSS1_CLKCTRL_OFFSET);
-	CLKCTRL(am33xx_epwmss2_hwmod, AM33XX_CM_PER_EPWMSS2_CLKCTRL_OFFSET);
-	CLKCTRL(am33xx_spi0_hwmod, AM33XX_CM_PER_SPI0_CLKCTRL_OFFSET);
-	CLKCTRL(am33xx_spi1_hwmod, AM33XX_CM_PER_SPI1_CLKCTRL_OFFSET);
-	CLKCTRL(am33xx_spinlock_hwmod, AM33XX_CM_PER_SPINLOCK_CLKCTRL_OFFSET);
 	CLKCTRL(am33xx_timer2_hwmod, AM33XX_CM_PER_TIMER2_CLKCTRL_OFFSET);
-	CLKCTRL(am33xx_timer3_hwmod, AM33XX_CM_PER_TIMER3_CLKCTRL_OFFSET);
-	CLKCTRL(am33xx_timer4_hwmod, AM33XX_CM_PER_TIMER4_CLKCTRL_OFFSET);
-	CLKCTRL(am33xx_timer5_hwmod, AM33XX_CM_PER_TIMER5_CLKCTRL_OFFSET);
-	CLKCTRL(am33xx_timer6_hwmod, AM33XX_CM_PER_TIMER6_CLKCTRL_OFFSET);
-	CLKCTRL(am33xx_timer7_hwmod, AM33XX_CM_PER_TIMER7_CLKCTRL_OFFSET);
 	CLKCTRL(am33xx_smartreflex0_hwmod,
 		AM33XX_CM_WKUP_SMARTREFLEX0_CLKCTRL_OFFSET);
 	CLKCTRL(am33xx_smartreflex1_hwmod,
@@ -807,8 +490,6 @@ static void omap_hwmod_am33xx_clkctrl(void)
 	CLKCTRL(am33xx_mpu_hwmod , AM33XX_CM_MPU_MPU_CLKCTRL_OFFSET);
 	CLKCTRL(am33xx_l3_instr_hwmod , AM33XX_CM_PER_L3_INSTR_CLKCTRL_OFFSET);
 	CLKCTRL(am33xx_ocmcram_hwmod , AM33XX_CM_PER_OCMCRAM_CLKCTRL_OFFSET);
-	CLKCTRL(am33xx_sha0_hwmod , AM33XX_CM_PER_SHA0_CLKCTRL_OFFSET);
-	CLKCTRL(am33xx_aes0_hwmod , AM33XX_CM_PER_AES0_CLKCTRL_OFFSET);
 }
 
 static void omap_hwmod_am33xx_rst(void)
@@ -826,21 +507,7 @@ void omap_hwmod_am33xx_reg(void)
 
 static void omap_hwmod_am43xx_clkctrl(void)
 {
-	CLKCTRL(am33xx_dcan0_hwmod, AM43XX_CM_PER_DCAN0_CLKCTRL_OFFSET);
-	CLKCTRL(am33xx_dcan1_hwmod, AM43XX_CM_PER_DCAN1_CLKCTRL_OFFSET);
-	CLKCTRL(am33xx_elm_hwmod, AM43XX_CM_PER_ELM_CLKCTRL_OFFSET);
-	CLKCTRL(am33xx_epwmss0_hwmod, AM43XX_CM_PER_EPWMSS0_CLKCTRL_OFFSET);
-	CLKCTRL(am33xx_epwmss1_hwmod, AM43XX_CM_PER_EPWMSS1_CLKCTRL_OFFSET);
-	CLKCTRL(am33xx_epwmss2_hwmod, AM43XX_CM_PER_EPWMSS2_CLKCTRL_OFFSET);
-	CLKCTRL(am33xx_spi0_hwmod, AM43XX_CM_PER_SPI0_CLKCTRL_OFFSET);
-	CLKCTRL(am33xx_spi1_hwmod, AM43XX_CM_PER_SPI1_CLKCTRL_OFFSET);
-	CLKCTRL(am33xx_spinlock_hwmod, AM43XX_CM_PER_SPINLOCK_CLKCTRL_OFFSET);
 	CLKCTRL(am33xx_timer2_hwmod, AM43XX_CM_PER_TIMER2_CLKCTRL_OFFSET);
-	CLKCTRL(am33xx_timer3_hwmod, AM43XX_CM_PER_TIMER3_CLKCTRL_OFFSET);
-	CLKCTRL(am33xx_timer4_hwmod, AM43XX_CM_PER_TIMER4_CLKCTRL_OFFSET);
-	CLKCTRL(am33xx_timer5_hwmod, AM43XX_CM_PER_TIMER5_CLKCTRL_OFFSET);
-	CLKCTRL(am33xx_timer6_hwmod, AM43XX_CM_PER_TIMER6_CLKCTRL_OFFSET);
-	CLKCTRL(am33xx_timer7_hwmod, AM43XX_CM_PER_TIMER7_CLKCTRL_OFFSET);
 	CLKCTRL(am33xx_smartreflex0_hwmod,
 		AM43XX_CM_WKUP_SMARTREFLEX0_CLKCTRL_OFFSET);
 	CLKCTRL(am33xx_smartreflex1_hwmod,
@@ -860,8 +527,6 @@ static void omap_hwmod_am43xx_clkctrl(void)
 	CLKCTRL(am33xx_mpu_hwmod , AM43XX_CM_MPU_MPU_CLKCTRL_OFFSET);
 	CLKCTRL(am33xx_l3_instr_hwmod , AM43XX_CM_PER_L3_INSTR_CLKCTRL_OFFSET);
 	CLKCTRL(am33xx_ocmcram_hwmod , AM43XX_CM_PER_OCMCRAM_CLKCTRL_OFFSET);
-	CLKCTRL(am33xx_sha0_hwmod , AM43XX_CM_PER_SHA0_CLKCTRL_OFFSET);
-	CLKCTRL(am33xx_aes0_hwmod , AM43XX_CM_PER_AES0_CLKCTRL_OFFSET);
 }
 
 static void omap_hwmod_am43xx_rst(void)
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
index c63f66427e46..f1ea8c604595 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
@@ -81,36 +81,6 @@ static struct omap_hwmod am33xx_wkup_m3_hwmod = {
 	.rst_lines_cnt	= ARRAY_SIZE(am33xx_wkup_m3_resets),
 };
 
-/*
- * 'adc/tsc' class
- * TouchScreen Controller (Anolog-To-Digital Converter)
- */
-static struct omap_hwmod_class_sysconfig am33xx_adc_tsc_sysc = {
-	.rev_offs	= 0x00,
-	.sysc_offs	= 0x10,
-	.sysc_flags	= SYSC_HAS_SIDLEMODE,
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			SIDLE_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class am33xx_adc_tsc_hwmod_class = {
-	.name		= "adc_tsc",
-	.sysc		= &am33xx_adc_tsc_sysc,
-};
-
-static struct omap_hwmod am33xx_adc_tsc_hwmod = {
-	.name		= "adc_tsc",
-	.class		= &am33xx_adc_tsc_hwmod_class,
-	.clkdm_name	= "l4_wkup_clkdm",
-	.main_clk	= "adc_tsc_fck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_WKUP_ADC_TSC_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
 
 /*
  * Modules omap_hwmod structures
@@ -226,34 +196,6 @@ static struct omap_hwmod am33xx_control_hwmod = {
 	},
 };
 
-/* lcdc */
-static struct omap_hwmod_class_sysconfig lcdc_sysc = {
-	.rev_offs	= 0x0,
-	.sysc_offs	= 0x54,
-	.sysc_flags	= SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE,
-	.idlemodes	= SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			  MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART,
-	.sysc_fields	= &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class am33xx_lcdc_hwmod_class = {
-	.name		= "lcdc",
-	.sysc		= &lcdc_sysc,
-};
-
-static struct omap_hwmod am33xx_lcdc_hwmod = {
-	.name		= "lcdc",
-	.class		= &am33xx_lcdc_hwmod_class,
-	.clkdm_name	= "lcdc_clkdm",
-	.flags		= HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
-	.main_clk	= "lcd_gclk",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_LCDC_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
 
 /*
  * Interfaces
@@ -331,21 +273,6 @@ static struct omap_hwmod_ocp_if am33xx_l4_wkup__control = {
 	.user		= OCP_USER_MPU,
 };
 
-/* L4 WKUP -> ADC_TSC */
-static struct omap_hwmod_ocp_if am33xx_l4_wkup__adc_tsc = {
-	.master		= &am33xx_l4_wkup_hwmod,
-	.slave		= &am33xx_adc_tsc_hwmod,
-	.clk		= "dpll_core_m4_div2_ck",
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if am33xx_l3_main__lcdc = {
-	.master		= &am33xx_l3_main_hwmod,
-	.slave		= &am33xx_lcdc_hwmod,
-	.clk		= "dpll_core_m4_ck",
-	.user		= OCP_USER_MPU,
-};
-
 /* l4 wkup -> timer1 */
 static struct omap_hwmod_ocp_if am33xx_l4_wkup__timer1 = {
 	.master		= &am33xx_l4_wkup_hwmod,
@@ -375,32 +302,14 @@ static struct omap_hwmod_ocp_if *am33xx_hwmod_ocp_ifs[] __initdata = {
 	&am33xx_l4_wkup__smartreflex1,
 	&am33xx_l4_wkup__timer1,
 	&am33xx_l4_wkup__rtc,
-	&am33xx_l4_wkup__adc_tsc,
 	&am33xx_l4_hs__pruss,
-	&am33xx_l4_per__dcan0,
-	&am33xx_l4_per__dcan1,
 	&am33xx_l4_ls__timer2,
-	&am33xx_l4_ls__timer3,
-	&am33xx_l4_ls__timer4,
-	&am33xx_l4_ls__timer5,
-	&am33xx_l4_ls__timer6,
-	&am33xx_l4_ls__timer7,
 	&am33xx_l3_main__tpcc,
-	&am33xx_l4_ls__spinlock,
-	&am33xx_l4_ls__elm,
-	&am33xx_l4_ls__epwmss0,
-	&am33xx_l4_ls__epwmss1,
-	&am33xx_l4_ls__epwmss2,
 	&am33xx_l3_s__gpmc,
-	&am33xx_l3_main__lcdc,
-	&am33xx_l4_ls__mcspi0,
-	&am33xx_l4_ls__mcspi1,
 	&am33xx_l3_main__tptc0,
 	&am33xx_l3_main__tptc1,
 	&am33xx_l3_main__tptc2,
 	&am33xx_l3_main__ocmc,
-	&am33xx_l3_main__sha0,
-	&am33xx_l3_main__aes0,
 	NULL,
 };
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index f52438bdfc14..3c8d2b6e887a 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -16,7 +16,6 @@
 #include <linux/power/smartreflex.h>
 #include <linux/platform_data/hsmmc-omap.h>
 
-#include <linux/omap-dma.h>
 #include "l3_3xxx.h"
 #include "l4_3xxx.h"
 
@@ -833,47 +832,6 @@ static struct omap_hwmod omap3xxx_gpio6_hwmod = {
 	.class		= &omap3xxx_gpio_hwmod_class,
 };
 
-/* dma attributes */
-static struct omap_dma_dev_attr dma_dev_attr = {
-	.dev_caps  = RESERVE_CHANNEL | DMA_LINKED_LCH | GLOBAL_PRIORITY |
-				IS_CSSA_32 | IS_CDSA_32 | IS_RW_PRIORITY,
-	.lch_count = 32,
-};
-
-static struct omap_hwmod_class_sysconfig omap3xxx_dma_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x002c,
-	.syss_offs	= 0x0028,
-	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
-			   SYSC_HAS_MIDLEMODE | SYSC_HAS_CLOCKACTIVITY |
-			   SYSC_HAS_EMUFREE | SYSC_HAS_AUTOIDLE |
-			   SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap3xxx_dma_hwmod_class = {
-	.name = "dma",
-	.sysc = &omap3xxx_dma_sysc,
-};
-
-/* dma_system */
-static struct omap_hwmod omap3xxx_dma_system_hwmod = {
-	.name		= "dma",
-	.class		= &omap3xxx_dma_hwmod_class,
-	.main_clk	= "core_l3_ick",
-	.prcm = {
-		.omap2 = {
-			.module_offs		= CORE_MOD,
-			.idlest_reg_id		= 1,
-			.idlest_idle_bit	= OMAP3430_ST_SDMA_SHIFT,
-		},
-	},
-	.dev_attr	= &dma_dev_attr,
-	.flags		= HWMOD_NO_IDLEST,
-};
-
 /*
  * 'mcbsp' class
  * multi channel buffered serial port controller
@@ -2233,23 +2191,6 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio6 = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* dma_system -> L3 */
-static struct omap_hwmod_ocp_if omap3xxx_dma_system__l3 = {
-	.master		= &omap3xxx_dma_system_hwmod,
-	.slave		= &omap3xxx_l3_main_hwmod,
-	.clk		= "core_l3_ick",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> dma_system */
-static struct omap_hwmod_ocp_if omap3xxx_l4_core__dma_system = {
-	.master		= &omap3xxx_l4_core_hwmod,
-	.slave		= &omap3xxx_dma_system_hwmod,
-	.clk		= "core_l4_ick",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-
 /* l4_core -> mcbsp1 */
 static struct omap_hwmod_ocp_if omap3xxx_l4_core__mcbsp1 = {
 	.master		= &omap3xxx_l4_core_hwmod,
@@ -2628,8 +2569,6 @@ static struct omap_hwmod_ocp_if *omap3xxx_hwmod_ocp_ifs[] __initdata = {
 	&omap3xxx_l4_per__gpio4,
 	&omap3xxx_l4_per__gpio5,
 	&omap3xxx_l4_per__gpio6,
-	&omap3xxx_dma_system__l3,
-	&omap3xxx_l4_core__dma_system,
 	&omap3xxx_l4_core__mcbsp1,
 	&omap3xxx_l4_per__mcbsp2,
 	&omap3xxx_l4_per__mcbsp3,
diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
index b81f83466c94..d0867dbd788e 100644
--- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
@@ -112,165 +112,6 @@ static struct omap_hwmod am43xx_synctimer_hwmod = {
 	},
 };
 
-static struct omap_hwmod am43xx_timer8_hwmod = {
-	.name		= "timer8",
-	.class		= &am33xx_timer_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "timer8_fck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM43XX_CM_PER_TIMER8_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-static struct omap_hwmod am43xx_timer9_hwmod = {
-	.name		= "timer9",
-	.class		= &am33xx_timer_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "timer9_fck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM43XX_CM_PER_TIMER9_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-static struct omap_hwmod am43xx_timer10_hwmod = {
-	.name		= "timer10",
-	.class		= &am33xx_timer_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "timer10_fck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM43XX_CM_PER_TIMER10_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-static struct omap_hwmod am43xx_timer11_hwmod = {
-	.name		= "timer11",
-	.class		= &am33xx_timer_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "timer11_fck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM43XX_CM_PER_TIMER11_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-static struct omap_hwmod am43xx_epwmss3_hwmod = {
-	.name		= "epwmss3",
-	.class		= &am33xx_epwmss_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs = AM43XX_CM_PER_EPWMSS3_CLKCTRL_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-static struct omap_hwmod am43xx_epwmss4_hwmod = {
-	.name		= "epwmss4",
-	.class		= &am33xx_epwmss_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs = AM43XX_CM_PER_EPWMSS4_CLKCTRL_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-static struct omap_hwmod am43xx_epwmss5_hwmod = {
-	.name		= "epwmss5",
-	.class		= &am33xx_epwmss_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs = AM43XX_CM_PER_EPWMSS5_CLKCTRL_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-static struct omap_hwmod am43xx_spi2_hwmod = {
-	.name		= "spi2",
-	.class		= &am33xx_spi_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "dpll_per_m2_div4_ck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs = AM43XX_CM_PER_SPI2_CLKCTRL_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-static struct omap_hwmod am43xx_spi3_hwmod = {
-	.name		= "spi3",
-	.class		= &am33xx_spi_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "dpll_per_m2_div4_ck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs = AM43XX_CM_PER_SPI3_CLKCTRL_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-static struct omap_hwmod am43xx_spi4_hwmod = {
-	.name		= "spi4",
-	.class		= &am33xx_spi_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "dpll_per_m2_div4_ck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs = AM43XX_CM_PER_SPI4_CLKCTRL_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-static struct omap_hwmod_class am43xx_ocp2scp_hwmod_class = {
-	.name	= "ocp2scp",
-};
-
-static struct omap_hwmod am43xx_ocp2scp0_hwmod = {
-	.name		= "ocp2scp0",
-	.class		= &am43xx_ocp2scp_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = AM43XX_CM_PER_USBPHYOCP2SCP0_CLKCTRL_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-static struct omap_hwmod am43xx_ocp2scp1_hwmod = {
-	.name		= "ocp2scp1",
-	.class		= &am43xx_ocp2scp_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs	= AM43XX_CM_PER_USBPHYOCP2SCP1_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
 
 static struct omap_hwmod_class_sysconfig am43xx_usb_otg_ss_sysc = {
 	.rev_offs	= 0x0000,
@@ -315,89 +156,6 @@ static struct omap_hwmod am43xx_usb_otg_ss1_hwmod = {
 	},
 };
 
-static struct omap_hwmod_class_sysconfig am43xx_qspi_sysc = {
-	.rev_offs	= 0,
-	.sysc_offs      = 0x0010,
-	.sysc_flags     = SYSC_HAS_SIDLEMODE,
-	.idlemodes      = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-				SIDLE_SMART_WKUP),
-	.sysc_fields    = &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class am43xx_qspi_hwmod_class = {
-	.name   = "qspi",
-	.sysc   = &am43xx_qspi_sysc,
-};
-
-static struct omap_hwmod am43xx_qspi_hwmod = {
-	.name           = "qspi",
-	.class          = &am43xx_qspi_hwmod_class,
-	.clkdm_name     = "l3s_clkdm",
-	.main_clk       = "l3s_gclk",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = AM43XX_CM_PER_QSPI_CLKCTRL_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/*
- * 'adc/tsc' class
- * TouchScreen Controller (Analog-To-Digital Converter)
- */
-static struct omap_hwmod_class_sysconfig am43xx_adc_tsc_sysc = {
-	.rev_offs	= 0x00,
-	.sysc_offs	= 0x10,
-	.sysc_flags	= SYSC_HAS_SIDLEMODE,
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			  SIDLE_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class am43xx_adc_tsc_hwmod_class = {
-	.name		= "adc_tsc",
-	.sysc		= &am43xx_adc_tsc_sysc,
-};
-
-static struct omap_hwmod am43xx_adc_tsc_hwmod = {
-	.name		= "adc_tsc",
-	.class		= &am43xx_adc_tsc_hwmod_class,
-	.clkdm_name	= "l3s_tsc_clkdm",
-	.main_clk	= "adc_tsc_fck",
-	.prcm		= {
-		.omap4  = {
-			.clkctrl_offs   = AM43XX_CM_WKUP_ADC_TSC_CLKCTRL_OFFSET,
-			.modulemode     = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-static struct omap_hwmod_class_sysconfig am43xx_des_sysc = {
-	.rev_offs	= 0x30,
-	.sysc_offs	= 0x34,
-	.syss_offs	= 0x38,
-	.sysc_flags	= SYSS_HAS_RESET_STATUS,
-};
-
-static struct omap_hwmod_class am43xx_des_hwmod_class = {
-	.name		= "des",
-	.sysc		= &am43xx_des_sysc,
-};
-
-static struct omap_hwmod am43xx_des_hwmod = {
-	.name		= "des",
-	.class		= &am43xx_des_hwmod_class,
-	.clkdm_name	= "l3_clkdm",
-	.main_clk	= "l3_gclk",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM43XX_CM_PER_DES_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
 /* dss */
 
 static struct omap_hwmod am43xx_dss_core_hwmod = {
@@ -467,44 +225,6 @@ static struct omap_hwmod am43xx_dss_rfbi_hwmod = {
 };
 
 
-static struct omap_hwmod_class_sysconfig am43xx_vpfe_sysc = {
-	.rev_offs       = 0x0,
-	.sysc_offs      = 0x104,
-	.sysc_flags     = SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE,
-	.idlemodes      = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-				MSTANDBY_FORCE | MSTANDBY_SMART | MSTANDBY_NO),
-	.sysc_fields    = &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class am43xx_vpfe_hwmod_class = {
-	.name           = "vpfe",
-	.sysc           = &am43xx_vpfe_sysc,
-};
-
-static struct omap_hwmod am43xx_vpfe0_hwmod = {
-	.name           = "vpfe0",
-	.class          = &am43xx_vpfe_hwmod_class,
-	.clkdm_name     = "l3s_clkdm",
-	.prcm           = {
-		.omap4  = {
-			.modulemode     = MODULEMODE_SWCTRL,
-			.clkctrl_offs   = AM43XX_CM_PER_VPFE0_CLKCTRL_OFFSET,
-		},
-	},
-};
-
-static struct omap_hwmod am43xx_vpfe1_hwmod = {
-	.name           = "vpfe1",
-	.class          = &am43xx_vpfe_hwmod_class,
-	.clkdm_name     = "l3s_clkdm",
-	.prcm           = {
-		.omap4  = {
-			.modulemode     = MODULEMODE_SWCTRL,
-			.clkctrl_offs   = AM43XX_CM_PER_VPFE1_CLKCTRL_OFFSET,
-		},
-	},
-};
-
 /* Interfaces */
 static struct omap_hwmod_ocp_if am43xx_l3_main__emif = {
 	.master		= &am33xx_l3_main_hwmod,
@@ -562,13 +282,6 @@ static struct omap_hwmod_ocp_if am43xx_l4_wkup__control = {
 	.user		= OCP_USER_MPU,
 };
 
-static struct omap_hwmod_ocp_if am43xx_l4_wkup__adc_tsc = {
-	.master         = &am33xx_l4_wkup_hwmod,
-	.slave          = &am43xx_adc_tsc_hwmod,
-	.clk            = "dpll_core_m4_div2_ck",
-	.user           = OCP_USER_MPU,
-};
-
 static struct omap_hwmod_ocp_if am43xx_l4_wkup__timer1 = {
 	.master		= &am33xx_l4_wkup_hwmod,
 	.slave		= &am33xx_timer1_hwmod,
@@ -583,90 +296,6 @@ static struct omap_hwmod_ocp_if am33xx_l4_wkup__synctimer = {
 	.user		= OCP_USER_MPU,
 };
 
-static struct omap_hwmod_ocp_if am43xx_l4_ls__timer8 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am43xx_timer8_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if am43xx_l4_ls__timer9 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am43xx_timer9_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if am43xx_l4_ls__timer10 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am43xx_timer10_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if am43xx_l4_ls__timer11 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am43xx_timer11_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if am43xx_l4_ls__epwmss3 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am43xx_epwmss3_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if am43xx_l4_ls__epwmss4 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am43xx_epwmss4_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if am43xx_l4_ls__epwmss5 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am43xx_epwmss5_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if am43xx_l4_ls__mcspi2 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am43xx_spi2_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if am43xx_l4_ls__mcspi3 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am43xx_spi3_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if am43xx_l4_ls__mcspi4 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am43xx_spi4_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if am43xx_l4_ls__ocp2scp0 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am43xx_ocp2scp0_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if am43xx_l4_ls__ocp2scp1 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am43xx_ocp2scp1_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
 static struct omap_hwmod_ocp_if am43xx_l3_s__usbotgss0 = {
 	.master         = &am33xx_l3_s_hwmod,
 	.slave          = &am43xx_usb_otg_ss0_hwmod,
@@ -681,13 +310,6 @@ static struct omap_hwmod_ocp_if am43xx_l3_s__usbotgss1 = {
 	.user           = OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-static struct omap_hwmod_ocp_if am43xx_l3_s__qspi = {
-	.master         = &am33xx_l3_s_hwmod,
-	.slave          = &am43xx_qspi_hwmod,
-	.clk            = "l3s_gclk",
-	.user           = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 static struct omap_hwmod_ocp_if am43xx_dss__l3_main = {
 	.master		= &am43xx_dss_core_hwmod,
 	.slave		= &am33xx_l3_main_hwmod,
@@ -716,53 +338,8 @@ static struct omap_hwmod_ocp_if am43xx_l4_ls__dss_rfbi = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-static struct omap_hwmod_ocp_if am43xx_l3__vpfe0 = {
-	.master         = &am43xx_vpfe0_hwmod,
-	.slave          = &am33xx_l3_main_hwmod,
-	.clk            = "l3_gclk",
-	.user           = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-static struct omap_hwmod_ocp_if am43xx_l3__vpfe1 = {
-	.master         = &am43xx_vpfe1_hwmod,
-	.slave          = &am33xx_l3_main_hwmod,
-	.clk            = "l3_gclk",
-	.user           = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-static struct omap_hwmod_ocp_if am43xx_l4_ls__vpfe0 = {
-	.master         = &am33xx_l4_ls_hwmod,
-	.slave          = &am43xx_vpfe0_hwmod,
-	.clk            = "l4ls_gclk",
-	.user           = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-static struct omap_hwmod_ocp_if am43xx_l4_ls__vpfe1 = {
-	.master         = &am33xx_l4_ls_hwmod,
-	.slave          = &am43xx_vpfe1_hwmod,
-	.clk            = "l4ls_gclk",
-	.user           = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-static struct omap_hwmod_ocp_if am43xx_l3_main__des = {
-	.master		= &am33xx_l3_main_hwmod,
-	.slave		= &am43xx_des_hwmod,
-	.clk		= "l3_gclk",
-	.user		= OCP_USER_MPU,
-};
-
 static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
 	&am33xx_l4_wkup__synctimer,
-	&am43xx_l4_ls__timer8,
-	&am43xx_l4_ls__timer9,
-	&am43xx_l4_ls__timer10,
-	&am43xx_l4_ls__timer11,
-	&am43xx_l4_ls__epwmss3,
-	&am43xx_l4_ls__epwmss4,
-	&am43xx_l4_ls__epwmss5,
-	&am43xx_l4_ls__mcspi2,
-	&am43xx_l4_ls__mcspi3,
-	&am43xx_l4_ls__mcspi4,
 	&am43xx_l3_main__pruss,
 	&am33xx_mpu__l3_main,
 	&am33xx_mpu__prcm,
@@ -782,44 +359,19 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
 	&am43xx_l4_wkup__smartreflex0,
 	&am43xx_l4_wkup__smartreflex1,
 	&am43xx_l4_wkup__timer1,
-	&am43xx_l4_wkup__adc_tsc,
-	&am43xx_l3_s__qspi,
-	&am33xx_l4_per__dcan0,
-	&am33xx_l4_per__dcan1,
 	&am33xx_l4_ls__timer2,
-	&am33xx_l4_ls__timer3,
-	&am33xx_l4_ls__timer4,
-	&am33xx_l4_ls__timer5,
-	&am33xx_l4_ls__timer6,
-	&am33xx_l4_ls__timer7,
 	&am33xx_l3_main__tpcc,
-	&am33xx_l4_ls__spinlock,
-	&am33xx_l4_ls__elm,
-	&am33xx_l4_ls__epwmss0,
-	&am33xx_l4_ls__epwmss1,
-	&am33xx_l4_ls__epwmss2,
 	&am33xx_l3_s__gpmc,
-	&am33xx_l4_ls__mcspi0,
-	&am33xx_l4_ls__mcspi1,
 	&am33xx_l3_main__tptc0,
 	&am33xx_l3_main__tptc1,
 	&am33xx_l3_main__tptc2,
 	&am33xx_l3_main__ocmc,
-	&am33xx_l3_main__sha0,
-	&am33xx_l3_main__aes0,
-	&am43xx_l3_main__des,
-	&am43xx_l4_ls__ocp2scp0,
-	&am43xx_l4_ls__ocp2scp1,
 	&am43xx_l3_s__usbotgss0,
 	&am43xx_l3_s__usbotgss1,
 	&am43xx_dss__l3_main,
 	&am43xx_l4_ls__dss,
 	&am43xx_l4_ls__dss_dispc,
 	&am43xx_l4_ls__dss_rfbi,
-	&am43xx_l3__vpfe0,
-	&am43xx_l3__vpfe1,
-	&am43xx_l4_ls__vpfe0,
-	&am43xx_l4_ls__vpfe1,
 	NULL,
 };
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 292f544bd62d..b7c51ea8c9a6 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -18,9 +18,6 @@
  */
 
 #include <linux/io.h>
-#include <linux/power/smartreflex.h>
-
-#include <linux/omap-dma.h>
 
 #include "omap_hwmod.h"
 #include "omap_hwmod_common_data.h"
@@ -32,9 +29,6 @@
 /* Base offset for all OMAP4 interrupts external to MPUSS */
 #define OMAP44XX_IRQ_GIC_START	32
 
-/* Base offset for all OMAP4 dma requests */
-#define OMAP44XX_DMA_REQ_START	1
-
 /*
  * IP blocks
  */
@@ -238,43 +232,6 @@ static struct omap_hwmod omap44xx_ocp_wp_noc_hwmod = {
  */
 
 /*
- * 'aess' class
- * audio engine sub system
- */
-
-static struct omap_hwmod_class_sysconfig omap44xx_aess_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.sysc_flags	= (SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART |
-			   MSTANDBY_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class omap44xx_aess_hwmod_class = {
-	.name	= "aess",
-	.sysc	= &omap44xx_aess_sysc,
-	.enable_preprogram = omap_hwmod_aess_preprogram,
-};
-
-/* aess */
-static struct omap_hwmod omap44xx_aess_hwmod = {
-	.name		= "aess",
-	.class		= &omap44xx_aess_hwmod_class,
-	.clkdm_name	= "abe_clkdm",
-	.main_clk	= "aess_fclk",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM1_ABE_AESS_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_ABE_AESS_CONTEXT_OFFSET,
-			.lostcontext_mask = OMAP4430_LOSTCONTEXT_DFF_MASK,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/*
  * 'counter' class
  * 32-bit ordinary counter, clocked by the falling edge of the 32 khz clock
  */
@@ -399,87 +356,6 @@ static struct omap_hwmod omap44xx_debugss_hwmod = {
 };
 
 /*
- * 'dma' class
- * dma controller for data exchange between memory to memory (i.e. internal or
- * external memory) and gp peripherals to memory or memory to gp peripherals
- */
-
-static struct omap_hwmod_class_sysconfig omap44xx_dma_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x002c,
-	.syss_offs	= 0x0028,
-	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
-			   SYSC_HAS_EMUFREE | SYSC_HAS_MIDLEMODE |
-			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
-			   SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap44xx_dma_hwmod_class = {
-	.name	= "dma",
-	.sysc	= &omap44xx_dma_sysc,
-};
-
-/* dma dev_attr */
-static struct omap_dma_dev_attr dma_dev_attr = {
-	.dev_caps	= RESERVE_CHANNEL | DMA_LINKED_LCH | GLOBAL_PRIORITY |
-			  IS_CSSA_32 | IS_CDSA_32 | IS_RW_PRIORITY,
-	.lch_count	= 32,
-};
-
-/* dma_system */
-static struct omap_hwmod omap44xx_dma_system_hwmod = {
-	.name		= "dma_system",
-	.class		= &omap44xx_dma_hwmod_class,
-	.clkdm_name	= "l3_dma_clkdm",
-	.main_clk	= "l3_div_ck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_SDMA_SDMA_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_SDMA_SDMA_CONTEXT_OFFSET,
-		},
-	},
-	.dev_attr	= &dma_dev_attr,
-};
-
-/*
- * 'dmic' class
- * digital microphone controller
- */
-
-static struct omap_hwmod_class_sysconfig omap44xx_dmic_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.sysc_flags	= (SYSC_HAS_EMUFREE | SYSC_HAS_RESET_STATUS |
-			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   SIDLE_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class omap44xx_dmic_hwmod_class = {
-	.name	= "dmic",
-	.sysc	= &omap44xx_dmic_sysc,
-};
-
-/* dmic */
-static struct omap_hwmod omap44xx_dmic_hwmod = {
-	.name		= "dmic",
-	.class		= &omap44xx_dmic_hwmod_class,
-	.clkdm_name	= "abe_clkdm",
-	.main_clk	= "func_dmic_abe_gfclk",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM1_ABE_DMIC_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_ABE_DMIC_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/*
  * 'dsp' class
  * dsp sub-system
  */
@@ -777,66 +653,7 @@ static struct omap_hwmod omap44xx_dss_venc_hwmod = {
 	.opt_clks_cnt	= ARRAY_SIZE(dss_venc_opt_clks),
 };
 
-/* sha0 HIB2 (the 'P' (public) device) */
-static struct omap_hwmod_class_sysconfig omap44xx_sha0_sysc = {
-	.rev_offs	= 0x100,
-	.sysc_offs	= 0x110,
-	.syss_offs	= 0x114,
-	.sysc_flags	= SYSS_HAS_RESET_STATUS,
-};
-
-static struct omap_hwmod_class omap44xx_sha0_hwmod_class = {
-	.name		= "sham",
-	.sysc		= &omap44xx_sha0_sysc,
-};
 
-static struct omap_hwmod omap44xx_sha0_hwmod = {
-	.name		= "sham",
-	.class		= &omap44xx_sha0_hwmod_class,
-	.clkdm_name	= "l4_secure_clkdm",
-	.main_clk	= "l3_div_ck",
-	.prcm		= {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_L4SEC_SHA2MD51_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_L4SEC_SHA2MD51_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/*
- * 'elm' class
- * bch error location module
- */
-
-static struct omap_hwmod_class_sysconfig omap44xx_elm_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
-			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
-			   SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap44xx_elm_hwmod_class = {
-	.name	= "elm",
-	.sysc	= &omap44xx_elm_sysc,
-};
-
-/* elm */
-static struct omap_hwmod omap44xx_elm_hwmod = {
-	.name		= "elm",
-	.class		= &omap44xx_elm_hwmod_class,
-	.clkdm_name	= "l4_per_clkdm",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_L4PER_ELM_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_L4PER_ELM_CONTEXT_OFFSET,
-		},
-	},
-};
 
 /*
  * 'emif' class
@@ -885,147 +702,6 @@ static struct omap_hwmod omap44xx_emif2_hwmod = {
 };
 
 /*
-    Crypto modules AES0/1 belong to:
-	PD_L4_PER power domain
-	CD_L4_SEC clock domain
-	On the L3, the AES modules are mapped to
-	L3_CLK2: Peripherals and multimedia sub clock domain
-*/
-static struct omap_hwmod_class_sysconfig omap44xx_aes_sysc = {
-	.rev_offs	= 0x80,
-	.sysc_offs	= 0x84,
-	.syss_offs	= 0x88,
-	.sysc_flags	= SYSS_HAS_RESET_STATUS,
-};
-
-static struct omap_hwmod_class omap44xx_aes_hwmod_class = {
-	.name		= "aes",
-	.sysc		= &omap44xx_aes_sysc,
-};
-
-static struct omap_hwmod omap44xx_aes1_hwmod = {
-	.name		= "aes1",
-	.class		= &omap44xx_aes_hwmod_class,
-	.clkdm_name	= "l4_secure_clkdm",
-	.main_clk	= "l3_div_ck",
-	.prcm		= {
-		.omap4	= {
-			.context_offs	= OMAP4_RM_L4SEC_AES1_CONTEXT_OFFSET,
-			.clkctrl_offs	= OMAP4_CM_L4SEC_AES1_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__aes1 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_aes1_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-static struct omap_hwmod omap44xx_aes2_hwmod = {
-	.name		= "aes2",
-	.class		= &omap44xx_aes_hwmod_class,
-	.clkdm_name	= "l4_secure_clkdm",
-	.main_clk	= "l3_div_ck",
-	.prcm		= {
-		.omap4	= {
-			.context_offs	= OMAP4_RM_L4SEC_AES2_CONTEXT_OFFSET,
-			.clkctrl_offs	= OMAP4_CM_L4SEC_AES2_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__aes2 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_aes2_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/*
- * 'des' class for DES3DES module
- */
-static struct omap_hwmod_class_sysconfig omap44xx_des_sysc = {
-	.rev_offs	= 0x30,
-	.sysc_offs	= 0x34,
-	.syss_offs	= 0x38,
-	.sysc_flags	= SYSS_HAS_RESET_STATUS,
-};
-
-static struct omap_hwmod_class omap44xx_des_hwmod_class = {
-	.name		= "des",
-	.sysc		= &omap44xx_des_sysc,
-};
-
-static struct omap_hwmod omap44xx_des_hwmod = {
-	.name		= "des",
-	.class		= &omap44xx_des_hwmod_class,
-	.clkdm_name	= "l4_secure_clkdm",
-	.main_clk	= "l3_div_ck",
-	.prcm		= {
-		.omap4	= {
-			.context_offs	= OMAP4_RM_L4SEC_DES3DES_CONTEXT_OFFSET,
-			.clkctrl_offs	= OMAP4_CM_L4SEC_DES3DES_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__des = {
-	.master		= &omap44xx_l3_main_2_hwmod,
-	.slave		= &omap44xx_des_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/*
- * 'fdif' class
- * face detection hw accelerator module
- */
-
-static struct omap_hwmod_class_sysconfig omap44xx_fdif_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	/*
-	 * FDIF needs 100 OCP clk cycles delay after a softreset before
-	 * accessing sysconfig again.
-	 * The lowest frequency at the moment for L3 bus is 100 MHz, so
-	 * 1usec delay is needed. Add an x2 margin to be safe (2 usecs).
-	 *
-	 * TODO: Indicate errata when available.
-	 */
-	.srst_udelay	= 2,
-	.sysc_flags	= (SYSC_HAS_MIDLEMODE | SYSC_HAS_RESET_STATUS |
-			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class omap44xx_fdif_hwmod_class = {
-	.name	= "fdif",
-	.sysc	= &omap44xx_fdif_sysc,
-};
-
-/* fdif */
-static struct omap_hwmod omap44xx_fdif_hwmod = {
-	.name		= "fdif",
-	.class		= &omap44xx_fdif_hwmod_class,
-	.clkdm_name	= "iss_clkdm",
-	.main_clk	= "fdif_fck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_CAM_FDIF_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_CAM_FDIF_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/*
  * 'gpmc' class
  * general purpose memory controller
  */
@@ -1063,45 +739,6 @@ static struct omap_hwmod omap44xx_gpmc_hwmod = {
 
 
 /*
- * 'hsi' class
- * mipi high-speed synchronous serial interface (multichannel and full-duplex
- * serial if)
- */
-
-static struct omap_hwmod_class_sysconfig omap44xx_hsi_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_EMUFREE |
-			   SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE |
-			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
-			   MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap44xx_hsi_hwmod_class = {
-	.name	= "hsi",
-	.sysc	= &omap44xx_hsi_sysc,
-};
-
-/* hsi */
-static struct omap_hwmod omap44xx_hsi_hwmod = {
-	.name		= "hsi",
-	.class		= &omap44xx_hsi_hwmod_class,
-	.clkdm_name	= "l3_init_clkdm",
-	.main_clk	= "hsi_fck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_L3INIT_HSI_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_L3INIT_HSI_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_HWCTRL,
-		},
-	},
-};
-
-/*
  * 'ipu' class
  * imaging processor unit
  */
@@ -1218,177 +855,6 @@ static struct omap_hwmod omap44xx_iva_hwmod = {
 };
 
 /*
- * 'kbd' class
- * keyboard controller
- */
-
-static struct omap_hwmod_class_sysconfig omap44xx_kbd_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
-			   SYSC_HAS_EMUFREE | SYSC_HAS_ENAWAKEUP |
-			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
-			   SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap44xx_kbd_hwmod_class = {
-	.name	= "kbd",
-	.sysc	= &omap44xx_kbd_sysc,
-};
-
-/* kbd */
-static struct omap_hwmod omap44xx_kbd_hwmod = {
-	.name		= "kbd",
-	.class		= &omap44xx_kbd_hwmod_class,
-	.clkdm_name	= "l4_wkup_clkdm",
-	.main_clk	= "sys_32k_ck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_WKUP_KEYBOARD_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_WKUP_KEYBOARD_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-
-/*
- * 'mcpdm' class
- * multi channel pdm controller (proprietary interface with phoenix power
- * ic)
- */
-
-static struct omap_hwmod_class_sysconfig omap44xx_mcpdm_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.sysc_flags	= (SYSC_HAS_EMUFREE | SYSC_HAS_RESET_STATUS |
-			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   SIDLE_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class omap44xx_mcpdm_hwmod_class = {
-	.name	= "mcpdm",
-	.sysc	= &omap44xx_mcpdm_sysc,
-};
-
-/* mcpdm */
-static struct omap_hwmod omap44xx_mcpdm_hwmod = {
-	.name		= "mcpdm",
-	.class		= &omap44xx_mcpdm_hwmod_class,
-	.clkdm_name	= "abe_clkdm",
-	/*
-	 * It's suspected that the McPDM requires an off-chip main
-	 * functional clock, controlled via I2C.  This IP block is
-	 * currently reset very early during boot, before I2C is
-	 * available, so it doesn't seem that we have any choice in
-	 * the kernel other than to avoid resetting it.
-	 *
-	 * Also, McPDM needs to be configured to NO_IDLE mode when it
-	 * is in used otherwise vital clocks will be gated which
-	 * results 'slow motion' audio playback.
-	 */
-	.flags		= HWMOD_EXT_OPT_MAIN_CLK | HWMOD_SWSUP_SIDLE,
-	.main_clk	= "pad_clks_ck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM1_ABE_PDM_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_ABE_PDM_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/*
- * 'mmu' class
- * The memory management unit performs virtual to physical address translation
- * for its requestors.
- */
-
-static struct omap_hwmod_class_sysconfig mmu_sysc = {
-	.rev_offs	= 0x000,
-	.sysc_offs	= 0x010,
-	.syss_offs	= 0x014,
-	.sysc_flags	= (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
-			   SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap44xx_mmu_hwmod_class = {
-	.name = "mmu",
-	.sysc = &mmu_sysc,
-};
-
-/* mmu ipu */
-
-static struct omap_hwmod omap44xx_mmu_ipu_hwmod;
-static struct omap_hwmod_rst_info omap44xx_mmu_ipu_resets[] = {
-	{ .name = "mmu_cache", .rst_shift = 2 },
-};
-
-/* l3_main_2 -> mmu_ipu */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__mmu_ipu = {
-	.master		= &omap44xx_l3_main_2_hwmod,
-	.slave		= &omap44xx_mmu_ipu_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-static struct omap_hwmod omap44xx_mmu_ipu_hwmod = {
-	.name		= "mmu_ipu",
-	.class		= &omap44xx_mmu_hwmod_class,
-	.clkdm_name	= "ducati_clkdm",
-	.rst_lines	= omap44xx_mmu_ipu_resets,
-	.rst_lines_cnt	= ARRAY_SIZE(omap44xx_mmu_ipu_resets),
-	.main_clk	= "ducati_clk_mux_ck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_DUCATI_DUCATI_CLKCTRL_OFFSET,
-			.rstctrl_offs = OMAP4_RM_DUCATI_RSTCTRL_OFFSET,
-			.context_offs = OMAP4_RM_DUCATI_DUCATI_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_HWCTRL,
-		},
-	},
-};
-
-/* mmu dsp */
-
-static struct omap_hwmod omap44xx_mmu_dsp_hwmod;
-static struct omap_hwmod_rst_info omap44xx_mmu_dsp_resets[] = {
-	{ .name = "mmu_cache", .rst_shift = 1 },
-};
-
-/* l4_cfg -> dsp */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__mmu_dsp = {
-	.master		= &omap44xx_l4_cfg_hwmod,
-	.slave		= &omap44xx_mmu_dsp_hwmod,
-	.clk		= "l4_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-static struct omap_hwmod omap44xx_mmu_dsp_hwmod = {
-	.name		= "mmu_dsp",
-	.class		= &omap44xx_mmu_hwmod_class,
-	.clkdm_name	= "tesla_clkdm",
-	.rst_lines	= omap44xx_mmu_dsp_resets,
-	.rst_lines_cnt	= ARRAY_SIZE(omap44xx_mmu_dsp_resets),
-	.main_clk	= "dpll_iva_m4x2_ck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_TESLA_TESLA_CLKCTRL_OFFSET,
-			.rstctrl_offs = OMAP4_RM_TESLA_RSTCTRL_OFFSET,
-			.context_offs = OMAP4_RM_TESLA_TESLA_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_HWCTRL,
-		},
-	},
-};
-
-/*
  * 'mpu' class
  * mpu sub-system
  */
@@ -1434,51 +900,6 @@ static struct omap_hwmod omap44xx_ocmc_ram_hwmod = {
 	},
 };
 
-/*
- * 'ocp2scp' class
- * bridge to transform ocp interface protocol to scp (serial control port)
- * protocol
- */
-
-static struct omap_hwmod_class_sysconfig omap44xx_ocp2scp_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE |
-			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap44xx_ocp2scp_hwmod_class = {
-	.name	= "ocp2scp",
-	.sysc	= &omap44xx_ocp2scp_sysc,
-};
-
-/* ocp2scp_usb_phy */
-static struct omap_hwmod omap44xx_ocp2scp_usb_phy_hwmod = {
-	.name		= "ocp2scp_usb_phy",
-	.class		= &omap44xx_ocp2scp_hwmod_class,
-	.clkdm_name	= "l3_init_clkdm",
-	/*
-	 * ocp2scp_usb_phy_phy_48m is provided by the OMAP4 PRCM IP
-	 * block as an "optional clock," and normally should never be
-	 * specified as the main_clk for an OMAP IP block.  However it
-	 * turns out that this clock is actually the main clock for
-	 * the ocp2scp_usb_phy IP block:
-	 * http://lists.infradead.org/pipermail/linux-arm-kernel/2012-September/119943.html
-	 * So listing ocp2scp_usb_phy_phy_48m as a main_clk here seems
-	 * to be the best workaround.
-	 */
-	.main_clk	= "ocp2scp_usb_phy_phy_48m",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_L3INIT_USBPHYOCP2SCP_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_HWCTRL,
-		},
-	},
-};
 
 /*
  * 'prcm' class
@@ -1585,189 +1006,6 @@ static struct omap_hwmod omap44xx_sl2if_hwmod = {
 };
 
 /*
- * 'slimbus' class
- * bidirectional, multi-drop, multi-channel two-line serial interface between
- * the device and external components
- */
-
-static struct omap_hwmod_class_sysconfig omap44xx_slimbus_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.sysc_flags	= (SYSC_HAS_RESET_STATUS | SYSC_HAS_SIDLEMODE |
-			   SYSC_HAS_SOFTRESET),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   SIDLE_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class omap44xx_slimbus_hwmod_class = {
-	.name	= "slimbus",
-	.sysc	= &omap44xx_slimbus_sysc,
-};
-
-/* slimbus1 */
-static struct omap_hwmod_opt_clk slimbus1_opt_clks[] = {
-	{ .role = "fclk_1", .clk = "slimbus1_fclk_1" },
-	{ .role = "fclk_0", .clk = "slimbus1_fclk_0" },
-	{ .role = "fclk_2", .clk = "slimbus1_fclk_2" },
-	{ .role = "slimbus_clk", .clk = "slimbus1_slimbus_clk" },
-};
-
-static struct omap_hwmod omap44xx_slimbus1_hwmod = {
-	.name		= "slimbus1",
-	.class		= &omap44xx_slimbus_hwmod_class,
-	.clkdm_name	= "abe_clkdm",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM1_ABE_SLIMBUS_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_ABE_SLIMBUS_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-	.opt_clks	= slimbus1_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(slimbus1_opt_clks),
-};
-
-/* slimbus2 */
-static struct omap_hwmod_opt_clk slimbus2_opt_clks[] = {
-	{ .role = "fclk_1", .clk = "slimbus2_fclk_1" },
-	{ .role = "fclk_0", .clk = "slimbus2_fclk_0" },
-	{ .role = "slimbus_clk", .clk = "slimbus2_slimbus_clk" },
-};
-
-static struct omap_hwmod omap44xx_slimbus2_hwmod = {
-	.name		= "slimbus2",
-	.class		= &omap44xx_slimbus_hwmod_class,
-	.clkdm_name	= "l4_per_clkdm",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_L4PER_SLIMBUS2_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_L4PER_SLIMBUS2_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-	.opt_clks	= slimbus2_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(slimbus2_opt_clks),
-};
-
-/*
- * 'smartreflex' class
- * smartreflex module (monitor silicon performance and outputs a measure of
- * performance error)
- */
-
-/* The IP is not compliant to type1 / type2 scheme */
-static struct omap_hwmod_class_sysconfig omap44xx_smartreflex_sysc = {
-	.rev_offs	= -ENODEV,
-	.sysc_offs	= 0x0038,
-	.sysc_flags	= (SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   SIDLE_SMART_WKUP),
-	.sysc_fields	= &omap36xx_sr_sysc_fields,
-};
-
-static struct omap_hwmod_class omap44xx_smartreflex_hwmod_class = {
-	.name	= "smartreflex",
-	.sysc	= &omap44xx_smartreflex_sysc,
-};
-
-/* smartreflex_core */
-static struct omap_smartreflex_dev_attr smartreflex_core_dev_attr = {
-	.sensor_voltdm_name   = "core",
-};
-
-static struct omap_hwmod omap44xx_smartreflex_core_hwmod = {
-	.name		= "smartreflex_core",
-	.class		= &omap44xx_smartreflex_hwmod_class,
-	.clkdm_name	= "l4_ao_clkdm",
-
-	.main_clk	= "smartreflex_core_fck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_ALWON_SR_CORE_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_ALWON_SR_CORE_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-	.dev_attr	= &smartreflex_core_dev_attr,
-};
-
-/* smartreflex_iva */
-static struct omap_smartreflex_dev_attr smartreflex_iva_dev_attr = {
-	.sensor_voltdm_name	= "iva",
-};
-
-static struct omap_hwmod omap44xx_smartreflex_iva_hwmod = {
-	.name		= "smartreflex_iva",
-	.class		= &omap44xx_smartreflex_hwmod_class,
-	.clkdm_name	= "l4_ao_clkdm",
-	.main_clk	= "smartreflex_iva_fck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_ALWON_SR_IVA_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_ALWON_SR_IVA_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-	.dev_attr	= &smartreflex_iva_dev_attr,
-};
-
-/* smartreflex_mpu */
-static struct omap_smartreflex_dev_attr smartreflex_mpu_dev_attr = {
-	.sensor_voltdm_name	= "mpu",
-};
-
-static struct omap_hwmod omap44xx_smartreflex_mpu_hwmod = {
-	.name		= "smartreflex_mpu",
-	.class		= &omap44xx_smartreflex_hwmod_class,
-	.clkdm_name	= "l4_ao_clkdm",
-	.main_clk	= "smartreflex_mpu_fck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_ALWON_SR_MPU_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_ALWON_SR_MPU_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-	.dev_attr	= &smartreflex_mpu_dev_attr,
-};
-
-/*
- * 'spinlock' class
- * spinlock provides hardware assistance for synchronizing the processes
- * running on multiple processors
- */
-
-static struct omap_hwmod_class_sysconfig omap44xx_spinlock_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
-			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
-			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap44xx_spinlock_hwmod_class = {
-	.name	= "spinlock",
-	.sysc	= &omap44xx_spinlock_sysc,
-};
-
-/* spinlock */
-static struct omap_hwmod omap44xx_spinlock_hwmod = {
-	.name		= "spinlock",
-	.class		= &omap44xx_spinlock_hwmod_class,
-	.clkdm_name	= "l4_cfg_clkdm",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_L4CFG_HW_SEM_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_L4CFG_HW_SEM_CONTEXT_OFFSET,
-		},
-	},
-};
-
-/*
  * 'timer' class
  * general purpose timer module with accurate 1ms tick
  * This class contains several variants: ['timer_1ms', 'timer']
@@ -1790,21 +1028,6 @@ static struct omap_hwmod_class omap44xx_timer_1ms_hwmod_class = {
 	.sysc	= &omap44xx_timer_1ms_sysc,
 };
 
-static struct omap_hwmod_class_sysconfig omap44xx_timer_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.sysc_flags	= (SYSC_HAS_EMUFREE | SYSC_HAS_RESET_STATUS |
-			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   SIDLE_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class omap44xx_timer_hwmod_class = {
-	.name	= "timer",
-	.sysc	= &omap44xx_timer_sysc,
-};
-
 /* timer1 */
 static struct omap_hwmod omap44xx_timer1_hwmod = {
 	.name		= "timer1",
@@ -1821,158 +1044,6 @@ static struct omap_hwmod omap44xx_timer1_hwmod = {
 	},
 };
 
-/* timer2 */
-static struct omap_hwmod omap44xx_timer2_hwmod = {
-	.name		= "timer2",
-	.class		= &omap44xx_timer_1ms_hwmod_class,
-	.clkdm_name	= "l4_per_clkdm",
-	.flags		= HWMOD_SET_DEFAULT_CLOCKACT,
-	.main_clk	= "cm2_dm2_mux",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_L4PER_DMTIMER2_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_L4PER_DMTIMER2_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* timer3 */
-static struct omap_hwmod omap44xx_timer3_hwmod = {
-	.name		= "timer3",
-	.class		= &omap44xx_timer_hwmod_class,
-	.clkdm_name	= "l4_per_clkdm",
-	.main_clk	= "cm2_dm3_mux",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_L4PER_DMTIMER3_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_L4PER_DMTIMER3_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* timer4 */
-static struct omap_hwmod omap44xx_timer4_hwmod = {
-	.name		= "timer4",
-	.class		= &omap44xx_timer_hwmod_class,
-	.clkdm_name	= "l4_per_clkdm",
-	.main_clk	= "cm2_dm4_mux",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_L4PER_DMTIMER4_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_L4PER_DMTIMER4_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* timer5 */
-static struct omap_hwmod omap44xx_timer5_hwmod = {
-	.name		= "timer5",
-	.class		= &omap44xx_timer_hwmod_class,
-	.clkdm_name	= "abe_clkdm",
-	.main_clk	= "timer5_sync_mux",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM1_ABE_TIMER5_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_ABE_TIMER5_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* timer6 */
-static struct omap_hwmod omap44xx_timer6_hwmod = {
-	.name		= "timer6",
-	.class		= &omap44xx_timer_hwmod_class,
-	.clkdm_name	= "abe_clkdm",
-	.main_clk	= "timer6_sync_mux",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM1_ABE_TIMER6_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_ABE_TIMER6_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* timer7 */
-static struct omap_hwmod omap44xx_timer7_hwmod = {
-	.name		= "timer7",
-	.class		= &omap44xx_timer_hwmod_class,
-	.clkdm_name	= "abe_clkdm",
-	.main_clk	= "timer7_sync_mux",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM1_ABE_TIMER7_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_ABE_TIMER7_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* timer8 */
-static struct omap_hwmod omap44xx_timer8_hwmod = {
-	.name		= "timer8",
-	.class		= &omap44xx_timer_hwmod_class,
-	.clkdm_name	= "abe_clkdm",
-	.main_clk	= "timer8_sync_mux",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM1_ABE_TIMER8_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_ABE_TIMER8_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* timer9 */
-static struct omap_hwmod omap44xx_timer9_hwmod = {
-	.name		= "timer9",
-	.class		= &omap44xx_timer_hwmod_class,
-	.clkdm_name	= "l4_per_clkdm",
-	.main_clk	= "cm2_dm9_mux",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_L4PER_DMTIMER9_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_L4PER_DMTIMER9_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* timer10 */
-static struct omap_hwmod omap44xx_timer10_hwmod = {
-	.name		= "timer10",
-	.class		= &omap44xx_timer_1ms_hwmod_class,
-	.clkdm_name	= "l4_per_clkdm",
-	.flags		= HWMOD_SET_DEFAULT_CLOCKACT,
-	.main_clk	= "cm2_dm10_mux",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_L4PER_DMTIMER10_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_L4PER_DMTIMER10_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* timer11 */
-static struct omap_hwmod omap44xx_timer11_hwmod = {
-	.name		= "timer11",
-	.class		= &omap44xx_timer_hwmod_class,
-	.clkdm_name	= "l4_per_clkdm",
-	.main_clk	= "cm2_dm11_mux",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_L4PER_DMTIMER11_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_L4PER_DMTIMER11_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
 /*
  * 'usb_host_fs' class
  * full-speed usb host controller
@@ -2213,30 +1284,6 @@ static struct omap_hwmod_ocp_if omap44xx_debugss__l3_main_2 = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* dma_system -> l3_main_2 */
-static struct omap_hwmod_ocp_if omap44xx_dma_system__l3_main_2 = {
-	.master		= &omap44xx_dma_system_hwmod,
-	.slave		= &omap44xx_l3_main_2_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* fdif -> l3_main_2 */
-static struct omap_hwmod_ocp_if omap44xx_fdif__l3_main_2 = {
-	.master		= &omap44xx_fdif_hwmod,
-	.slave		= &omap44xx_l3_main_2_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* hsi -> l3_main_2 */
-static struct omap_hwmod_ocp_if omap44xx_hsi__l3_main_2 = {
-	.master		= &omap44xx_hsi_hwmod,
-	.slave		= &omap44xx_l3_main_2_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /* ipu -> l3_main_2 */
 static struct omap_hwmod_ocp_if omap44xx_ipu__l3_main_2 = {
 	.master		= &omap44xx_ipu_hwmod,
@@ -2317,14 +1364,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_3 = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* aess -> l4_abe */
-static struct omap_hwmod_ocp_if __maybe_unused omap44xx_aess__l4_abe = {
-	.master		= &omap44xx_aess_hwmod,
-	.slave		= &omap44xx_l4_abe_hwmod,
-	.clk		= "ocp_abe_iclk",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /* dsp -> l4_abe */
 static struct omap_hwmod_ocp_if omap44xx_dsp__l4_abe = {
 	.master		= &omap44xx_dsp_hwmod,
@@ -2389,22 +1428,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__ocp_wp_noc = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* l4_abe -> aess */
-static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l4_abe__aess = {
-	.master		= &omap44xx_l4_abe_hwmod,
-	.slave		= &omap44xx_aess_hwmod,
-	.clk		= "ocp_abe_iclk",
-	.user		= OCP_USER_MPU,
-};
-
-/* l4_abe -> aess (dma) */
-static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l4_abe__aess_dma = {
-	.master		= &omap44xx_l4_abe_hwmod,
-	.slave		= &omap44xx_aess_hwmod,
-	.clk		= "ocp_abe_iclk",
-	.user		= OCP_USER_SDMA,
-};
-
 /* l4_wkup -> counter_32k */
 static struct omap_hwmod_ocp_if omap44xx_l4_wkup__counter_32k = {
 	.master		= &omap44xx_l4_wkup_hwmod,
@@ -2453,22 +1476,6 @@ static struct omap_hwmod_ocp_if omap44xx_l3_instr__debugss = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* l4_cfg -> dma_system */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__dma_system = {
-	.master		= &omap44xx_l4_cfg_hwmod,
-	.slave		= &omap44xx_dma_system_hwmod,
-	.clk		= "l4_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_abe -> dmic */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__dmic = {
-	.master		= &omap44xx_l4_abe_hwmod,
-	.slave		= &omap44xx_dmic_hwmod,
-	.clk		= "ocp_abe_iclk",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /* dsp -> iva */
 static struct omap_hwmod_ocp_if omap44xx_dsp__iva = {
 	.master		= &omap44xx_dsp_hwmod,
@@ -2605,30 +1612,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_venc = {
 	.user		= OCP_USER_MPU,
 };
 
-/* l3_main_2 -> sham */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__sha0 = {
-	.master		= &omap44xx_l3_main_2_hwmod,
-	.slave		= &omap44xx_sha0_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per -> elm */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__elm = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_elm_hwmod,
-	.clk		= "l4_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> fdif */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__fdif = {
-	.master		= &omap44xx_l4_cfg_hwmod,
-	.slave		= &omap44xx_fdif_hwmod,
-	.clk		= "l4_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /* l3_main_2 -> gpmc */
 static struct omap_hwmod_ocp_if omap44xx_l3_main_2__gpmc = {
 	.master		= &omap44xx_l3_main_2_hwmod,
@@ -2637,14 +1620,6 @@ static struct omap_hwmod_ocp_if omap44xx_l3_main_2__gpmc = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* l4_cfg -> hsi */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__hsi = {
-	.master		= &omap44xx_l4_cfg_hwmod,
-	.slave		= &omap44xx_hsi_hwmod,
-	.clk		= "l4_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /* l3_main_2 -> ipu */
 static struct omap_hwmod_ocp_if omap44xx_l3_main_2__ipu = {
 	.master		= &omap44xx_l3_main_2_hwmod,
@@ -2677,22 +1652,6 @@ static struct omap_hwmod_ocp_if omap44xx_l3_main_2__iva = {
 	.user		= OCP_USER_MPU,
 };
 
-/* l4_wkup -> kbd */
-static struct omap_hwmod_ocp_if omap44xx_l4_wkup__kbd = {
-	.master		= &omap44xx_l4_wkup_hwmod,
-	.slave		= &omap44xx_kbd_hwmod,
-	.clk		= "l4_wkup_clk_mux_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_abe -> mcpdm */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcpdm = {
-	.master		= &omap44xx_l4_abe_hwmod,
-	.slave		= &omap44xx_mcpdm_hwmod,
-	.clk		= "ocp_abe_iclk",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /* l3_main_2 -> ocmc_ram */
 static struct omap_hwmod_ocp_if omap44xx_l3_main_2__ocmc_ram = {
 	.master		= &omap44xx_l3_main_2_hwmod,
@@ -2701,14 +1660,6 @@ static struct omap_hwmod_ocp_if omap44xx_l3_main_2__ocmc_ram = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* l4_cfg -> ocp2scp_usb_phy */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__ocp2scp_usb_phy = {
-	.master		= &omap44xx_l4_cfg_hwmod,
-	.slave		= &omap44xx_ocp2scp_usb_phy_hwmod,
-	.clk		= "l4_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /* mpu_private -> prcm_mpu */
 static struct omap_hwmod_ocp_if omap44xx_mpu_private__prcm_mpu = {
 	.master		= &omap44xx_mpu_private_hwmod,
@@ -2757,62 +1708,6 @@ static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l3_main_2__sl2if = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* l4_abe -> slimbus1 */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__slimbus1 = {
-	.master		= &omap44xx_l4_abe_hwmod,
-	.slave		= &omap44xx_slimbus1_hwmod,
-	.clk		= "ocp_abe_iclk",
-	.user		= OCP_USER_MPU,
-};
-
-/* l4_abe -> slimbus1 (dma) */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__slimbus1_dma = {
-	.master		= &omap44xx_l4_abe_hwmod,
-	.slave		= &omap44xx_slimbus1_hwmod,
-	.clk		= "ocp_abe_iclk",
-	.user		= OCP_USER_SDMA,
-};
-
-/* l4_per -> slimbus2 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__slimbus2 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_slimbus2_hwmod,
-	.clk		= "l4_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> smartreflex_core */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__smartreflex_core = {
-	.master		= &omap44xx_l4_cfg_hwmod,
-	.slave		= &omap44xx_smartreflex_core_hwmod,
-	.clk		= "l4_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> smartreflex_iva */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__smartreflex_iva = {
-	.master		= &omap44xx_l4_cfg_hwmod,
-	.slave		= &omap44xx_smartreflex_iva_hwmod,
-	.clk		= "l4_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> smartreflex_mpu */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__smartreflex_mpu = {
-	.master		= &omap44xx_l4_cfg_hwmod,
-	.slave		= &omap44xx_smartreflex_mpu_hwmod,
-	.clk		= "l4_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> spinlock */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__spinlock = {
-	.master		= &omap44xx_l4_cfg_hwmod,
-	.slave		= &omap44xx_spinlock_hwmod,
-	.clk		= "l4_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /* l4_wkup -> timer1 */
 static struct omap_hwmod_ocp_if omap44xx_l4_wkup__timer1 = {
 	.master		= &omap44xx_l4_wkup_hwmod,
@@ -2821,86 +1716,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_wkup__timer1 = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* l4_per -> timer2 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__timer2 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_timer2_hwmod,
-	.clk		= "l4_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per -> timer3 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__timer3 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_timer3_hwmod,
-	.clk		= "l4_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per -> timer4 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__timer4 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_timer4_hwmod,
-	.clk		= "l4_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_abe -> timer5 */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer5 = {
-	.master		= &omap44xx_l4_abe_hwmod,
-	.slave		= &omap44xx_timer5_hwmod,
-	.clk		= "ocp_abe_iclk",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_abe -> timer6 */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer6 = {
-	.master		= &omap44xx_l4_abe_hwmod,
-	.slave		= &omap44xx_timer6_hwmod,
-	.clk		= "ocp_abe_iclk",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_abe -> timer7 */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer7 = {
-	.master		= &omap44xx_l4_abe_hwmod,
-	.slave		= &omap44xx_timer7_hwmod,
-	.clk		= "ocp_abe_iclk",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_abe -> timer8 */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer8 = {
-	.master		= &omap44xx_l4_abe_hwmod,
-	.slave		= &omap44xx_timer8_hwmod,
-	.clk		= "ocp_abe_iclk",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per -> timer9 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__timer9 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_timer9_hwmod,
-	.clk		= "l4_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per -> timer10 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__timer10 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_timer10_hwmod,
-	.clk		= "l4_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per -> timer11 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__timer11 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_timer11_hwmod,
-	.clk		= "l4_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /* l4_cfg -> usb_host_fs */
 static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l4_cfg__usb_host_fs = {
 	.master		= &omap44xx_l4_cfg_hwmod,
@@ -2953,9 +1768,6 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = {
 	&omap44xx_l4_cfg__l3_main_1,
 	&omap44xx_mpu__l3_main_1,
 	&omap44xx_debugss__l3_main_2,
-	&omap44xx_dma_system__l3_main_2,
-	&omap44xx_fdif__l3_main_2,
-	&omap44xx_hsi__l3_main_2,
 	&omap44xx_ipu__l3_main_2,
 	&omap44xx_iss__l3_main_2,
 	&omap44xx_iva__l3_main_2,
@@ -2966,7 +1778,6 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = {
 	&omap44xx_l3_main_1__l3_main_3,
 	&omap44xx_l3_main_2__l3_main_3,
 	&omap44xx_l4_cfg__l3_main_3,
-	&omap44xx_aess__l4_abe,
 	&omap44xx_dsp__l4_abe,
 	&omap44xx_l3_main_1__l4_abe,
 	&omap44xx_mpu__l4_abe,
@@ -2975,16 +1786,12 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = {
 	&omap44xx_l4_cfg__l4_wkup,
 	&omap44xx_mpu__mpu_private,
 	&omap44xx_l4_cfg__ocp_wp_noc,
-	&omap44xx_l4_abe__aess,
-	&omap44xx_l4_abe__aess_dma,
 	&omap44xx_l4_wkup__counter_32k,
 	&omap44xx_l4_cfg__ctrl_module_core,
 	&omap44xx_l4_cfg__ctrl_module_pad_core,
 	&omap44xx_l4_wkup__ctrl_module_wkup,
 	&omap44xx_l4_wkup__ctrl_module_pad_wkup,
 	&omap44xx_l3_instr__debugss,
-	&omap44xx_l4_cfg__dma_system,
-	&omap44xx_l4_abe__dmic,
 	&omap44xx_dsp__iva,
 	/* &omap44xx_dsp__sl2if, */
 	&omap44xx_l4_cfg__dsp,
@@ -3002,53 +1809,24 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = {
 	&omap44xx_l4_per__dss_rfbi,
 	&omap44xx_l3_main_2__dss_venc,
 	&omap44xx_l4_per__dss_venc,
-	&omap44xx_l4_per__elm,
-	&omap44xx_l4_cfg__fdif,
 	&omap44xx_l3_main_2__gpmc,
-	&omap44xx_l4_cfg__hsi,
 	&omap44xx_l3_main_2__ipu,
 	&omap44xx_l3_main_2__iss,
 	/* &omap44xx_iva__sl2if, */
 	&omap44xx_l3_main_2__iva,
-	&omap44xx_l4_wkup__kbd,
-	&omap44xx_l4_abe__mcpdm,
-	&omap44xx_l3_main_2__mmu_ipu,
-	&omap44xx_l4_cfg__mmu_dsp,
 	&omap44xx_l3_main_2__ocmc_ram,
-	&omap44xx_l4_cfg__ocp2scp_usb_phy,
 	&omap44xx_mpu_private__prcm_mpu,
 	&omap44xx_l4_wkup__cm_core_aon,
 	&omap44xx_l4_cfg__cm_core,
 	&omap44xx_l4_wkup__prm,
 	&omap44xx_l4_wkup__scrm,
 	/* &omap44xx_l3_main_2__sl2if, */
-	&omap44xx_l4_abe__slimbus1,
-	&omap44xx_l4_abe__slimbus1_dma,
-	&omap44xx_l4_per__slimbus2,
-	&omap44xx_l4_cfg__smartreflex_core,
-	&omap44xx_l4_cfg__smartreflex_iva,
-	&omap44xx_l4_cfg__smartreflex_mpu,
-	&omap44xx_l4_cfg__spinlock,
 	&omap44xx_l4_wkup__timer1,
-	&omap44xx_l4_per__timer2,
-	&omap44xx_l4_per__timer3,
-	&omap44xx_l4_per__timer4,
-	&omap44xx_l4_abe__timer5,
-	&omap44xx_l4_abe__timer6,
-	&omap44xx_l4_abe__timer7,
-	&omap44xx_l4_abe__timer8,
-	&omap44xx_l4_per__timer9,
-	&omap44xx_l4_per__timer10,
-	&omap44xx_l4_per__timer11,
 	/* &omap44xx_l4_cfg__usb_host_fs, */
 	&omap44xx_l4_cfg__usb_host_hs,
 	&omap44xx_l4_cfg__usb_tll_hs,
 	&omap44xx_mpu__emif1,
 	&omap44xx_mpu__emif2,
-	&omap44xx_l3_main_2__aes1,
-	&omap44xx_l3_main_2__aes2,
-	&omap44xx_l3_main_2__des,
-	&omap44xx_l3_main_2__sha0,
 	NULL,
 };
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
index cc5ad6acab1d..ad398f6bc011 100644
--- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
@@ -17,8 +17,6 @@
 #include <linux/io.h>
 #include <linux/power/smartreflex.h>
 
-#include <linux/omap-dma.h>
-
 #include "omap_hwmod.h"
 #include "omap_hwmod_common_data.h"
 #include "cm1_54xx.h"
@@ -28,10 +26,6 @@
 /* Base offset for all OMAP5 interrupts external to MPUSS */
 #define OMAP54XX_IRQ_GIC_START	32
 
-/* Base offset for all OMAP5 dma requests */
-#define OMAP54XX_DMA_REQ_START	1
-
-
 /*
  * IP blocks
  */
@@ -233,87 +227,6 @@ static struct omap_hwmod omap54xx_counter_32k_hwmod = {
 };
 
 /*
- * 'dma' class
- * dma controller for data exchange between memory to memory (i.e. internal or
- * external memory) and gp peripherals to memory or memory to gp peripherals
- */
-
-static struct omap_hwmod_class_sysconfig omap54xx_dma_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x002c,
-	.syss_offs	= 0x0028,
-	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
-			   SYSC_HAS_EMUFREE | SYSC_HAS_MIDLEMODE |
-			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
-			   SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap54xx_dma_hwmod_class = {
-	.name	= "dma",
-	.sysc	= &omap54xx_dma_sysc,
-};
-
-/* dma dev_attr */
-static struct omap_dma_dev_attr dma_dev_attr = {
-	.dev_caps	= RESERVE_CHANNEL | DMA_LINKED_LCH | GLOBAL_PRIORITY |
-			  IS_CSSA_32 | IS_CDSA_32 | IS_RW_PRIORITY,
-	.lch_count	= 32,
-};
-
-/* dma_system */
-static struct omap_hwmod omap54xx_dma_system_hwmod = {
-	.name		= "dma_system",
-	.class		= &omap54xx_dma_hwmod_class,
-	.clkdm_name	= "dma_clkdm",
-	.main_clk	= "l3_iclk_div",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP54XX_CM_DMA_DMA_SYSTEM_CLKCTRL_OFFSET,
-			.context_offs = OMAP54XX_RM_DMA_DMA_SYSTEM_CONTEXT_OFFSET,
-		},
-	},
-	.dev_attr	= &dma_dev_attr,
-};
-
-/*
- * 'dmic' class
- * digital microphone controller
- */
-
-static struct omap_hwmod_class_sysconfig omap54xx_dmic_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.sysc_flags	= (SYSC_HAS_EMUFREE | SYSC_HAS_RESET_STATUS |
-			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   SIDLE_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class omap54xx_dmic_hwmod_class = {
-	.name	= "dmic",
-	.sysc	= &omap54xx_dmic_sysc,
-};
-
-/* dmic */
-static struct omap_hwmod omap54xx_dmic_hwmod = {
-	.name		= "dmic",
-	.class		= &omap54xx_dmic_hwmod_class,
-	.clkdm_name	= "abe_clkdm",
-	.main_clk	= "dmic_gfclk",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP54XX_CM_ABE_DMIC_CLKCTRL_OFFSET,
-			.context_offs = OMAP54XX_RM_ABE_DMIC_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/*
  * 'dss' class
  * display sub-system
  */
@@ -593,154 +506,8 @@ static struct omap_hwmod omap54xx_emif2_hwmod = {
 	},
 };
 
-/*
- * 'kbd' class
- * keyboard controller
- */
-
-static struct omap_hwmod_class_sysconfig omap54xx_kbd_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.sysc_flags	= (SYSC_HAS_EMUFREE | SYSC_HAS_SIDLEMODE |
-			   SYSC_HAS_SOFTRESET),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap54xx_kbd_hwmod_class = {
-	.name	= "kbd",
-	.sysc	= &omap54xx_kbd_sysc,
-};
-
-/* kbd */
-static struct omap_hwmod omap54xx_kbd_hwmod = {
-	.name		= "kbd",
-	.class		= &omap54xx_kbd_hwmod_class,
-	.clkdm_name	= "wkupaon_clkdm",
-	.main_clk	= "sys_32k_ck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP54XX_CM_WKUPAON_KBD_CLKCTRL_OFFSET,
-			.context_offs = OMAP54XX_RM_WKUPAON_KBD_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/*
- * 'mcpdm' class
- * multi channel pdm controller (proprietary interface with phoenix power
- * ic)
- */
-
-static struct omap_hwmod_class_sysconfig omap54xx_mcpdm_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.sysc_flags	= (SYSC_HAS_EMUFREE | SYSC_HAS_RESET_STATUS |
-			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   SIDLE_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class omap54xx_mcpdm_hwmod_class = {
-	.name	= "mcpdm",
-	.sysc	= &omap54xx_mcpdm_sysc,
-};
-
-/* mcpdm */
-static struct omap_hwmod omap54xx_mcpdm_hwmod = {
-	.name		= "mcpdm",
-	.class		= &omap54xx_mcpdm_hwmod_class,
-	.clkdm_name	= "abe_clkdm",
-	/*
-	 * It's suspected that the McPDM requires an off-chip main
-	 * functional clock, controlled via I2C.  This IP block is
-	 * currently reset very early during boot, before I2C is
-	 * available, so it doesn't seem that we have any choice in
-	 * the kernel other than to avoid resetting it.  XXX This is
-	 * really a hardware issue workaround: every IP block should
-	 * be able to source its main functional clock from either
-	 * on-chip or off-chip sources.  McPDM seems to be the only
-	 * current exception.
-	 */
-
-	.flags		= HWMOD_EXT_OPT_MAIN_CLK | HWMOD_SWSUP_SIDLE,
-	.main_clk	= "pad_clks_ck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP54XX_CM_ABE_MCPDM_CLKCTRL_OFFSET,
-			.context_offs = OMAP54XX_RM_ABE_MCPDM_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
 
-/*
- * 'mmu' class
- * The memory management unit performs virtual to physical address translation
- * for its requestors.
- */
 
-static struct omap_hwmod_class_sysconfig omap54xx_mmu_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
-			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
-			   SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap54xx_mmu_hwmod_class = {
-	.name = "mmu",
-	.sysc = &omap54xx_mmu_sysc,
-};
-
-static struct omap_hwmod_rst_info omap54xx_mmu_dsp_resets[] = {
-	{ .name = "mmu_cache", .rst_shift = 1 },
-};
-
-static struct omap_hwmod omap54xx_mmu_dsp_hwmod = {
-	.name		= "mmu_dsp",
-	.class		= &omap54xx_mmu_hwmod_class,
-	.clkdm_name	= "dsp_clkdm",
-	.rst_lines	= omap54xx_mmu_dsp_resets,
-	.rst_lines_cnt	= ARRAY_SIZE(omap54xx_mmu_dsp_resets),
-	.main_clk	= "dpll_iva_h11x2_ck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP54XX_CM_DSP_DSP_CLKCTRL_OFFSET,
-			.rstctrl_offs = OMAP54XX_RM_DSP_RSTCTRL_OFFSET,
-			.context_offs = OMAP54XX_RM_DSP_DSP_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_HWCTRL,
-		},
-	},
-};
-
-/* mmu ipu */
-static struct omap_hwmod_rst_info omap54xx_mmu_ipu_resets[] = {
-	{ .name = "mmu_cache", .rst_shift = 2 },
-};
-
-static struct omap_hwmod omap54xx_mmu_ipu_hwmod = {
-	.name		= "mmu_ipu",
-	.class		= &omap54xx_mmu_hwmod_class,
-	.clkdm_name	= "ipu_clkdm",
-	.rst_lines	= omap54xx_mmu_ipu_resets,
-	.rst_lines_cnt	= ARRAY_SIZE(omap54xx_mmu_ipu_resets),
-	.main_clk	= "dpll_core_h22x2_ck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP54XX_CM_IPU_IPU_CLKCTRL_OFFSET,
-			.rstctrl_offs = OMAP54XX_RM_IPU_RSTCTRL_OFFSET,
-			.context_offs = OMAP54XX_RM_IPU_IPU_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_HWCTRL,
-		},
-	},
-};
 
 /*
  * 'mpu' class
@@ -766,76 +533,6 @@ static struct omap_hwmod omap54xx_mpu_hwmod = {
 	},
 };
 
-/*
- * 'spinlock' class
- * spinlock provides hardware assistance for synchronizing the processes
- * running on multiple processors
- */
-
-static struct omap_hwmod_class_sysconfig omap54xx_spinlock_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
-			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
-			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap54xx_spinlock_hwmod_class = {
-	.name	= "spinlock",
-	.sysc	= &omap54xx_spinlock_sysc,
-};
-
-/* spinlock */
-static struct omap_hwmod omap54xx_spinlock_hwmod = {
-	.name		= "spinlock",
-	.class		= &omap54xx_spinlock_hwmod_class,
-	.clkdm_name	= "l4cfg_clkdm",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP54XX_CM_L4CFG_SPINLOCK_CLKCTRL_OFFSET,
-			.context_offs = OMAP54XX_RM_L4CFG_SPINLOCK_CONTEXT_OFFSET,
-		},
-	},
-};
-
-/*
- * 'ocp2scp' class
- * bridge to transform ocp interface protocol to scp (serial control port)
- * protocol
- */
-
-static struct omap_hwmod_class_sysconfig omap54xx_ocp2scp_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE |
-			SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap54xx_ocp2scp_hwmod_class = {
-	.name	= "ocp2scp",
-	.sysc	= &omap54xx_ocp2scp_sysc,
-};
-
-/* ocp2scp1 */
-static struct omap_hwmod omap54xx_ocp2scp1_hwmod = {
-	.name		= "ocp2scp1",
-	.class		= &omap54xx_ocp2scp_hwmod_class,
-	.clkdm_name	= "l3init_clkdm",
-	.main_clk	= "l4_root_clk_div",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP54XX_CM_L3INIT_OCP2SCP1_CLKCTRL_OFFSET,
-			.context_offs = OMAP54XX_RM_L3INIT_OCP2SCP1_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_HWCTRL,
-		},
-	},
-};
 
 /*
  * 'timer' class
@@ -858,21 +555,6 @@ static struct omap_hwmod_class omap54xx_timer_1ms_hwmod_class = {
 	.sysc	= &omap54xx_timer_1ms_sysc,
 };
 
-static struct omap_hwmod_class_sysconfig omap54xx_timer_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.sysc_flags	= (SYSC_HAS_EMUFREE | SYSC_HAS_RESET_STATUS |
-			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   SIDLE_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class omap54xx_timer_hwmod_class = {
-	.name	= "timer",
-	.sysc	= &omap54xx_timer_sysc,
-};
-
 /* timer1 */
 static struct omap_hwmod omap54xx_timer1_hwmod = {
 	.name		= "timer1",
@@ -889,158 +571,6 @@ static struct omap_hwmod omap54xx_timer1_hwmod = {
 	},
 };
 
-/* timer2 */
-static struct omap_hwmod omap54xx_timer2_hwmod = {
-	.name		= "timer2",
-	.class		= &omap54xx_timer_1ms_hwmod_class,
-	.clkdm_name	= "l4per_clkdm",
-	.main_clk	= "timer2_gfclk_mux",
-	.flags		= HWMOD_SET_DEFAULT_CLOCKACT,
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP54XX_CM_L4PER_TIMER2_CLKCTRL_OFFSET,
-			.context_offs = OMAP54XX_RM_L4PER_TIMER2_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* timer3 */
-static struct omap_hwmod omap54xx_timer3_hwmod = {
-	.name		= "timer3",
-	.class		= &omap54xx_timer_hwmod_class,
-	.clkdm_name	= "l4per_clkdm",
-	.main_clk	= "timer3_gfclk_mux",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP54XX_CM_L4PER_TIMER3_CLKCTRL_OFFSET,
-			.context_offs = OMAP54XX_RM_L4PER_TIMER3_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* timer4 */
-static struct omap_hwmod omap54xx_timer4_hwmod = {
-	.name		= "timer4",
-	.class		= &omap54xx_timer_hwmod_class,
-	.clkdm_name	= "l4per_clkdm",
-	.main_clk	= "timer4_gfclk_mux",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP54XX_CM_L4PER_TIMER4_CLKCTRL_OFFSET,
-			.context_offs = OMAP54XX_RM_L4PER_TIMER4_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* timer5 */
-static struct omap_hwmod omap54xx_timer5_hwmod = {
-	.name		= "timer5",
-	.class		= &omap54xx_timer_hwmod_class,
-	.clkdm_name	= "abe_clkdm",
-	.main_clk	= "timer5_gfclk_mux",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP54XX_CM_ABE_TIMER5_CLKCTRL_OFFSET,
-			.context_offs = OMAP54XX_RM_ABE_TIMER5_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* timer6 */
-static struct omap_hwmod omap54xx_timer6_hwmod = {
-	.name		= "timer6",
-	.class		= &omap54xx_timer_hwmod_class,
-	.clkdm_name	= "abe_clkdm",
-	.main_clk	= "timer6_gfclk_mux",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP54XX_CM_ABE_TIMER6_CLKCTRL_OFFSET,
-			.context_offs = OMAP54XX_RM_ABE_TIMER6_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* timer7 */
-static struct omap_hwmod omap54xx_timer7_hwmod = {
-	.name		= "timer7",
-	.class		= &omap54xx_timer_hwmod_class,
-	.clkdm_name	= "abe_clkdm",
-	.main_clk	= "timer7_gfclk_mux",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP54XX_CM_ABE_TIMER7_CLKCTRL_OFFSET,
-			.context_offs = OMAP54XX_RM_ABE_TIMER7_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* timer8 */
-static struct omap_hwmod omap54xx_timer8_hwmod = {
-	.name		= "timer8",
-	.class		= &omap54xx_timer_hwmod_class,
-	.clkdm_name	= "abe_clkdm",
-	.main_clk	= "timer8_gfclk_mux",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP54XX_CM_ABE_TIMER8_CLKCTRL_OFFSET,
-			.context_offs = OMAP54XX_RM_ABE_TIMER8_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* timer9 */
-static struct omap_hwmod omap54xx_timer9_hwmod = {
-	.name		= "timer9",
-	.class		= &omap54xx_timer_hwmod_class,
-	.clkdm_name	= "l4per_clkdm",
-	.main_clk	= "timer9_gfclk_mux",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP54XX_CM_L4PER_TIMER9_CLKCTRL_OFFSET,
-			.context_offs = OMAP54XX_RM_L4PER_TIMER9_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* timer10 */
-static struct omap_hwmod omap54xx_timer10_hwmod = {
-	.name		= "timer10",
-	.class		= &omap54xx_timer_1ms_hwmod_class,
-	.clkdm_name	= "l4per_clkdm",
-	.main_clk	= "timer10_gfclk_mux",
-	.flags		= HWMOD_SET_DEFAULT_CLOCKACT,
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP54XX_CM_L4PER_TIMER10_CLKCTRL_OFFSET,
-			.context_offs = OMAP54XX_RM_L4PER_TIMER10_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* timer11 */
-static struct omap_hwmod omap54xx_timer11_hwmod = {
-	.name		= "timer11",
-	.class		= &omap54xx_timer_hwmod_class,
-	.clkdm_name	= "l4per_clkdm",
-	.main_clk	= "timer11_gfclk_mux",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP54XX_CM_L4PER_TIMER11_CLKCTRL_OFFSET,
-			.context_offs = OMAP54XX_RM_L4PER_TIMER11_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
 /*
  * 'usb_host_hs' class
  * high-speed multi-port usb host controller
@@ -1193,35 +723,6 @@ static struct omap_hwmod omap54xx_usb_otg_ss_hwmod = {
 	.opt_clks_cnt	= ARRAY_SIZE(usb_otg_ss_opt_clks),
 };
 
-
-/*
- * 'ocp2scp' class
- * bridge to transform ocp interface protocol to scp (serial control port)
- * protocol
- */
-/* ocp2scp3 */
-static struct omap_hwmod omap54xx_ocp2scp3_hwmod;
-/* l4_cfg -> ocp2scp3 */
-static struct omap_hwmod_ocp_if omap54xx_l4_cfg__ocp2scp3 = {
-	.master		= &omap54xx_l4_cfg_hwmod,
-	.slave		= &omap54xx_ocp2scp3_hwmod,
-	.clk		= "l4_root_clk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-static struct omap_hwmod omap54xx_ocp2scp3_hwmod = {
-	.name		= "ocp2scp3",
-	.class		= &omap54xx_ocp2scp_hwmod_class,
-	.clkdm_name	= "l3init_clkdm",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP54XX_CM_L3INIT_OCP2SCP3_CLKCTRL_OFFSET,
-			.context_offs = OMAP54XX_RM_L3INIT_OCP2SCP3_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_HWCTRL,
-		},
-	},
-};
-
 /*
  * 'sata' class
  * sata:  serial ata interface  gen2 compliant   ( 1 rx/ 1 tx)
@@ -1303,14 +804,6 @@ static struct omap_hwmod_ocp_if omap54xx_l4_cfg__l3_main_1 = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* l4_cfg -> mmu_dsp */
-static struct omap_hwmod_ocp_if omap54xx_l4_cfg__mmu_dsp = {
-	.master		= &omap54xx_l4_cfg_hwmod,
-	.slave		= &omap54xx_mmu_dsp_hwmod,
-	.clk		= "l4_root_clk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /* mpu -> l3_main_1 */
 static struct omap_hwmod_ocp_if omap54xx_mpu__l3_main_1 = {
 	.master		= &omap54xx_mpu_hwmod,
@@ -1335,14 +828,6 @@ static struct omap_hwmod_ocp_if omap54xx_l4_cfg__l3_main_2 = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* l3_main_2 -> mmu_ipu */
-static struct omap_hwmod_ocp_if omap54xx_l3_main_2__mmu_ipu = {
-	.master		= &omap54xx_l3_main_2_hwmod,
-	.slave		= &omap54xx_mmu_ipu_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /* l3_main_1 -> l3_main_3 */
 static struct omap_hwmod_ocp_if omap54xx_l3_main_1__l3_main_3 = {
 	.master		= &omap54xx_l3_main_1_hwmod,
@@ -1423,22 +908,6 @@ static struct omap_hwmod_ocp_if omap54xx_l4_wkup__counter_32k = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* l4_cfg -> dma_system */
-static struct omap_hwmod_ocp_if omap54xx_l4_cfg__dma_system = {
-	.master		= &omap54xx_l4_cfg_hwmod,
-	.slave		= &omap54xx_dma_system_hwmod,
-	.clk		= "l4_root_clk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_abe -> dmic */
-static struct omap_hwmod_ocp_if omap54xx_l4_abe__dmic = {
-	.master		= &omap54xx_l4_abe_hwmod,
-	.slave		= &omap54xx_dmic_hwmod,
-	.clk		= "abe_iclk",
-	.user		= OCP_USER_MPU,
-};
-
 /* l3_main_2 -> dss */
 static struct omap_hwmod_ocp_if omap54xx_l3_main_2__dss = {
 	.master		= &omap54xx_l3_main_2_hwmod,
@@ -1503,22 +972,6 @@ static struct omap_hwmod_ocp_if omap54xx_mpu__emif2 = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* l4_wkup -> kbd */
-static struct omap_hwmod_ocp_if omap54xx_l4_wkup__kbd = {
-	.master		= &omap54xx_l4_wkup_hwmod,
-	.slave		= &omap54xx_kbd_hwmod,
-	.clk		= "wkupaon_iclk_mux",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_abe -> mcpdm */
-static struct omap_hwmod_ocp_if omap54xx_l4_abe__mcpdm = {
-	.master		= &omap54xx_l4_abe_hwmod,
-	.slave		= &omap54xx_mcpdm_hwmod,
-	.clk		= "abe_iclk",
-	.user		= OCP_USER_MPU,
-};
-
 /* l4_cfg -> mpu */
 static struct omap_hwmod_ocp_if omap54xx_l4_cfg__mpu = {
 	.master		= &omap54xx_l4_cfg_hwmod,
@@ -1527,22 +980,6 @@ static struct omap_hwmod_ocp_if omap54xx_l4_cfg__mpu = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* l4_cfg -> spinlock */
-static struct omap_hwmod_ocp_if omap54xx_l4_cfg__spinlock = {
-	.master		= &omap54xx_l4_cfg_hwmod,
-	.slave		= &omap54xx_spinlock_hwmod,
-	.clk		= "l4_root_clk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> ocp2scp1 */
-static struct omap_hwmod_ocp_if omap54xx_l4_cfg__ocp2scp1 = {
-	.master		= &omap54xx_l4_cfg_hwmod,
-	.slave		= &omap54xx_ocp2scp1_hwmod,
-	.clk		= "l4_root_clk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /* l4_wkup -> timer1 */
 static struct omap_hwmod_ocp_if omap54xx_l4_wkup__timer1 = {
 	.master		= &omap54xx_l4_wkup_hwmod,
@@ -1551,86 +988,6 @@ static struct omap_hwmod_ocp_if omap54xx_l4_wkup__timer1 = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* l4_per -> timer2 */
-static struct omap_hwmod_ocp_if omap54xx_l4_per__timer2 = {
-	.master		= &omap54xx_l4_per_hwmod,
-	.slave		= &omap54xx_timer2_hwmod,
-	.clk		= "l4_root_clk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per -> timer3 */
-static struct omap_hwmod_ocp_if omap54xx_l4_per__timer3 = {
-	.master		= &omap54xx_l4_per_hwmod,
-	.slave		= &omap54xx_timer3_hwmod,
-	.clk		= "l4_root_clk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per -> timer4 */
-static struct omap_hwmod_ocp_if omap54xx_l4_per__timer4 = {
-	.master		= &omap54xx_l4_per_hwmod,
-	.slave		= &omap54xx_timer4_hwmod,
-	.clk		= "l4_root_clk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_abe -> timer5 */
-static struct omap_hwmod_ocp_if omap54xx_l4_abe__timer5 = {
-	.master		= &omap54xx_l4_abe_hwmod,
-	.slave		= &omap54xx_timer5_hwmod,
-	.clk		= "abe_iclk",
-	.user		= OCP_USER_MPU,
-};
-
-/* l4_abe -> timer6 */
-static struct omap_hwmod_ocp_if omap54xx_l4_abe__timer6 = {
-	.master		= &omap54xx_l4_abe_hwmod,
-	.slave		= &omap54xx_timer6_hwmod,
-	.clk		= "abe_iclk",
-	.user		= OCP_USER_MPU,
-};
-
-/* l4_abe -> timer7 */
-static struct omap_hwmod_ocp_if omap54xx_l4_abe__timer7 = {
-	.master		= &omap54xx_l4_abe_hwmod,
-	.slave		= &omap54xx_timer7_hwmod,
-	.clk		= "abe_iclk",
-	.user		= OCP_USER_MPU,
-};
-
-/* l4_abe -> timer8 */
-static struct omap_hwmod_ocp_if omap54xx_l4_abe__timer8 = {
-	.master		= &omap54xx_l4_abe_hwmod,
-	.slave		= &omap54xx_timer8_hwmod,
-	.clk		= "abe_iclk",
-	.user		= OCP_USER_MPU,
-};
-
-/* l4_per -> timer9 */
-static struct omap_hwmod_ocp_if omap54xx_l4_per__timer9 = {
-	.master		= &omap54xx_l4_per_hwmod,
-	.slave		= &omap54xx_timer9_hwmod,
-	.clk		= "l4_root_clk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per -> timer10 */
-static struct omap_hwmod_ocp_if omap54xx_l4_per__timer10 = {
-	.master		= &omap54xx_l4_per_hwmod,
-	.slave		= &omap54xx_timer10_hwmod,
-	.clk		= "l4_root_clk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per -> timer11 */
-static struct omap_hwmod_ocp_if omap54xx_l4_per__timer11 = {
-	.master		= &omap54xx_l4_per_hwmod,
-	.slave		= &omap54xx_timer11_hwmod,
-	.clk		= "l4_root_clk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /* l4_cfg -> usb_host_hs */
 static struct omap_hwmod_ocp_if omap54xx_l4_cfg__usb_host_hs = {
 	.master		= &omap54xx_l4_cfg_hwmod,
@@ -1673,9 +1030,6 @@ static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = {
 	&omap54xx_l3_main_1__l4_wkup,
 	&omap54xx_mpu__mpu_private,
 	&omap54xx_l4_wkup__counter_32k,
-	&omap54xx_l4_cfg__dma_system,
-	&omap54xx_l4_abe__dmic,
-	&omap54xx_l4_cfg__mmu_dsp,
 	&omap54xx_l3_main_2__dss,
 	&omap54xx_l3_main_2__dss_dispc,
 	&omap54xx_l3_main_2__dss_dsi1_a,
@@ -1684,27 +1038,11 @@ static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = {
 	&omap54xx_l3_main_2__dss_rfbi,
 	&omap54xx_mpu__emif1,
 	&omap54xx_mpu__emif2,
-	&omap54xx_l3_main_2__mmu_ipu,
-	&omap54xx_l4_wkup__kbd,
-	&omap54xx_l4_abe__mcpdm,
 	&omap54xx_l4_cfg__mpu,
-	&omap54xx_l4_cfg__spinlock,
-	&omap54xx_l4_cfg__ocp2scp1,
 	&omap54xx_l4_wkup__timer1,
-	&omap54xx_l4_per__timer2,
-	&omap54xx_l4_per__timer3,
-	&omap54xx_l4_per__timer4,
-	&omap54xx_l4_abe__timer5,
-	&omap54xx_l4_abe__timer6,
-	&omap54xx_l4_abe__timer7,
-	&omap54xx_l4_abe__timer8,
-	&omap54xx_l4_per__timer9,
-	&omap54xx_l4_per__timer10,
-	&omap54xx_l4_per__timer11,
 	&omap54xx_l4_cfg__usb_host_hs,
 	&omap54xx_l4_cfg__usb_tll_hs,
 	&omap54xx_l4_cfg__usb_otg_ss,
-	&omap54xx_l4_cfg__ocp2scp3,
 	&omap54xx_l4_cfg__sata,
 	NULL,
 };
diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
index f8715bd96687..acef3733db4c 100644
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -15,9 +15,6 @@
  */
 
 #include <linux/io.h>
-#include <linux/power/smartreflex.h>
-
-#include <linux/omap-dma.h>
 
 #include "omap_hwmod.h"
 #include "omap_hwmod_common_data.h"
@@ -29,10 +26,6 @@
 /* Base offset for all DRA7XX interrupts external to MPUSS */
 #define DRA7XX_IRQ_GIC_START	32
 
-/* Base offset for all DRA7XX dma requests */
-#define DRA7XX_DMA_REQ_START	1
-
-
 /*
  * IP blocks
  */
@@ -284,156 +277,6 @@ static struct omap_hwmod dra7xx_ctrl_module_wkup_hwmod = {
 };
 
 /*
- * 'dcan' class
- *
- */
-
-static struct omap_hwmod_class dra7xx_dcan_hwmod_class = {
-	.name	= "dcan",
-};
-
-/* dcan1 */
-static struct omap_hwmod dra7xx_dcan1_hwmod = {
-	.name		= "dcan1",
-	.class		= &dra7xx_dcan_hwmod_class,
-	.clkdm_name	= "wkupaon_clkdm",
-	.main_clk	= "dcan1_sys_clk_mux",
-	.flags		= HWMOD_CLKDM_NOAUTO,
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_WKUPAON_DCAN1_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_WKUPAON_DCAN1_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* dcan2 */
-static struct omap_hwmod dra7xx_dcan2_hwmod = {
-	.name		= "dcan2",
-	.class		= &dra7xx_dcan_hwmod_class,
-	.clkdm_name	= "l4per2_clkdm",
-	.main_clk	= "sys_clkin1",
-	.flags		= HWMOD_CLKDM_NOAUTO,
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_L4PER2_DCAN2_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_L4PER2_DCAN2_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* pwmss  */
-static struct omap_hwmod_class_sysconfig dra7xx_epwmss_sysc = {
-	.rev_offs	= 0x0,
-	.sysc_offs	= 0x4,
-	.sysc_flags	= SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
-			  SYSC_HAS_RESET_STATUS,
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type2,
-};
-
-/*
- * epwmss class
- */
-static struct omap_hwmod_class dra7xx_epwmss_hwmod_class = {
-	.name		= "epwmss",
-	.sysc		= &dra7xx_epwmss_sysc,
-};
-
-/* epwmss0 */
-static struct omap_hwmod dra7xx_epwmss0_hwmod = {
-	.name		= "epwmss0",
-	.class		= &dra7xx_epwmss_hwmod_class,
-	.clkdm_name	= "l4per2_clkdm",
-	.main_clk	= "l4_root_clk_div",
-	.prcm		= {
-		.omap4	= {
-			.modulemode	= MODULEMODE_SWCTRL,
-			.clkctrl_offs	= DRA7XX_CM_L4PER2_PWMSS1_CLKCTRL_OFFSET,
-			.context_offs	= DRA7XX_RM_L4PER2_PWMSS1_CONTEXT_OFFSET,
-		},
-	},
-};
-
-/* epwmss1 */
-static struct omap_hwmod dra7xx_epwmss1_hwmod = {
-	.name		= "epwmss1",
-	.class		= &dra7xx_epwmss_hwmod_class,
-	.clkdm_name	= "l4per2_clkdm",
-	.main_clk	= "l4_root_clk_div",
-	.prcm		= {
-		.omap4	= {
-			.modulemode	= MODULEMODE_SWCTRL,
-			.clkctrl_offs	= DRA7XX_CM_L4PER2_PWMSS2_CLKCTRL_OFFSET,
-			.context_offs	= DRA7XX_RM_L4PER2_PWMSS2_CONTEXT_OFFSET,
-		},
-	},
-};
-
-/* epwmss2 */
-static struct omap_hwmod dra7xx_epwmss2_hwmod = {
-	.name		= "epwmss2",
-	.class		= &dra7xx_epwmss_hwmod_class,
-	.clkdm_name	= "l4per2_clkdm",
-	.main_clk	= "l4_root_clk_div",
-	.prcm		= {
-		.omap4	= {
-			.modulemode	= MODULEMODE_SWCTRL,
-			.clkctrl_offs	= DRA7XX_CM_L4PER2_PWMSS3_CLKCTRL_OFFSET,
-			.context_offs	= DRA7XX_RM_L4PER2_PWMSS3_CONTEXT_OFFSET,
-		},
-	},
-};
-
-/*
- * 'dma' class
- *
- */
-
-static struct omap_hwmod_class_sysconfig dra7xx_dma_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x002c,
-	.syss_offs	= 0x0028,
-	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
-			   SYSC_HAS_EMUFREE | SYSC_HAS_MIDLEMODE |
-			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
-			   SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
-			   MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class dra7xx_dma_hwmod_class = {
-	.name	= "dma",
-	.sysc	= &dra7xx_dma_sysc,
-};
-
-/* dma dev_attr */
-static struct omap_dma_dev_attr dma_dev_attr = {
-	.dev_caps	= RESERVE_CHANNEL | DMA_LINKED_LCH | GLOBAL_PRIORITY |
-			  IS_CSSA_32 | IS_CDSA_32 | IS_RW_PRIORITY,
-	.lch_count	= 32,
-};
-
-/* dma_system */
-static struct omap_hwmod dra7xx_dma_system_hwmod = {
-	.name		= "dma_system",
-	.class		= &dra7xx_dma_hwmod_class,
-	.clkdm_name	= "dma_clkdm",
-	.main_clk	= "l3_iclk_div",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_DMA_DMA_SYSTEM_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_DMA_DMA_SYSTEM_CONTEXT_OFFSET,
-		},
-	},
-	.dev_attr	= &dma_dev_attr,
-};
-
-/*
  * 'tpcc' class
  *
  */
@@ -626,112 +469,9 @@ static struct omap_hwmod dra7xx_dss_hdmi_hwmod = {
 	.parent_hwmod	= &dra7xx_dss_hwmod,
 };
 
-/* AES (the 'P' (public) device) */
-static struct omap_hwmod_class_sysconfig dra7xx_aes_sysc = {
-	.rev_offs	= 0x0080,
-	.sysc_offs	= 0x0084,
-	.syss_offs	= 0x0088,
-	.sysc_flags	= SYSS_HAS_RESET_STATUS,
-};
 
-static struct omap_hwmod_class dra7xx_aes_hwmod_class = {
-	.name	= "aes",
-	.sysc	= &dra7xx_aes_sysc,
-};
 
-/* AES1 */
-static struct omap_hwmod dra7xx_aes1_hwmod = {
-	.name		= "aes1",
-	.class		= &dra7xx_aes_hwmod_class,
-	.clkdm_name	= "l4sec_clkdm",
-	.main_clk	= "l3_iclk_div",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_L4SEC_AES1_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_L4SEC_AES1_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_HWCTRL,
-		},
-	},
-};
-
-/* AES2 */
-static struct omap_hwmod dra7xx_aes2_hwmod = {
-	.name		= "aes2",
-	.class		= &dra7xx_aes_hwmod_class,
-	.clkdm_name	= "l4sec_clkdm",
-	.main_clk	= "l3_iclk_div",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_L4SEC_AES2_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_L4SEC_AES2_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_HWCTRL,
-		},
-	},
-};
-
-/* sha0 HIB2 (the 'P' (public) device) */
-static struct omap_hwmod_class_sysconfig dra7xx_sha0_sysc = {
-	.rev_offs	= 0x100,
-	.sysc_offs	= 0x110,
-	.syss_offs	= 0x114,
-	.sysc_flags	= SYSS_HAS_RESET_STATUS,
-};
-
-static struct omap_hwmod_class dra7xx_sha0_hwmod_class = {
-	.name		= "sham",
-	.sysc		= &dra7xx_sha0_sysc,
-};
 
-static struct omap_hwmod dra7xx_sha0_hwmod = {
-	.name		= "sham",
-	.class		= &dra7xx_sha0_hwmod_class,
-	.clkdm_name	= "l4sec_clkdm",
-	.main_clk	= "l3_iclk_div",
-	.prcm		= {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_L4SEC_SHA2MD51_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_L4SEC_SHA2MD51_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_HWCTRL,
-		},
-	},
-};
-
-/*
- * 'elm' class
- *
- */
-
-static struct omap_hwmod_class_sysconfig dra7xx_elm_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
-			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
-			   SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   SIDLE_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class dra7xx_elm_hwmod_class = {
-	.name	= "elm",
-	.sysc	= &dra7xx_elm_sysc,
-};
-
-/* elm */
-
-static struct omap_hwmod dra7xx_elm_hwmod = {
-	.name		= "elm",
-	.class		= &dra7xx_elm_hwmod_class,
-	.clkdm_name	= "l4per_clkdm",
-	.main_clk	= "l3_iclk_div",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_L4PER_ELM_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_L4PER_ELM_CONTEXT_OFFSET,
-		},
-	},
-};
 
 /*
  * 'gpmc' class
@@ -797,55 +537,6 @@ static struct omap_hwmod dra7xx_mpu_hwmod = {
 	},
 };
 
-/*
- * 'ocp2scp' class
- *
- */
-
-static struct omap_hwmod_class_sysconfig dra7xx_ocp2scp_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE |
-			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class dra7xx_ocp2scp_hwmod_class = {
-	.name	= "ocp2scp",
-	.sysc	= &dra7xx_ocp2scp_sysc,
-};
-
-/* ocp2scp1 */
-static struct omap_hwmod dra7xx_ocp2scp1_hwmod = {
-	.name		= "ocp2scp1",
-	.class		= &dra7xx_ocp2scp_hwmod_class,
-	.clkdm_name	= "l3init_clkdm",
-	.main_clk	= "l4_root_clk_div",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_L3INIT_OCP2SCP1_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_L3INIT_OCP2SCP1_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_HWCTRL,
-		},
-	},
-};
-
-/* ocp2scp3 */
-static struct omap_hwmod dra7xx_ocp2scp3_hwmod = {
-	.name		= "ocp2scp3",
-	.class		= &dra7xx_ocp2scp_hwmod_class,
-	.clkdm_name	= "l3init_clkdm",
-	.main_clk	= "l4_root_clk_div",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_L3INIT_OCP2SCP3_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_L3INIT_OCP2SCP3_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_HWCTRL,
-		},
-	},
-};
 
 /*
  * 'PCIE' class
@@ -1032,103 +723,6 @@ static struct omap_hwmod dra7xx_sata_hwmod = {
 };
 
 /*
- * 'smartreflex' class
- *
- */
-
-/* The IP is not compliant to type1 / type2 scheme */
-static struct omap_hwmod_class_sysconfig dra7xx_smartreflex_sysc = {
-	.rev_offs	= -ENODEV,
-	.sysc_offs	= 0x0038,
-	.sysc_flags	= (SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   SIDLE_SMART_WKUP),
-	.sysc_fields	= &omap36xx_sr_sysc_fields,
-};
-
-static struct omap_hwmod_class dra7xx_smartreflex_hwmod_class = {
-	.name	= "smartreflex",
-	.sysc	= &dra7xx_smartreflex_sysc,
-};
-
-/* smartreflex_core */
-/* smartreflex_core dev_attr */
-static struct omap_smartreflex_dev_attr smartreflex_core_dev_attr = {
-	.sensor_voltdm_name	= "core",
-};
-
-static struct omap_hwmod dra7xx_smartreflex_core_hwmod = {
-	.name		= "smartreflex_core",
-	.class		= &dra7xx_smartreflex_hwmod_class,
-	.clkdm_name	= "coreaon_clkdm",
-	.main_clk	= "wkupaon_iclk_mux",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_COREAON_SMARTREFLEX_CORE_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_COREAON_SMARTREFLEX_CORE_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-	.dev_attr	= &smartreflex_core_dev_attr,
-};
-
-/* smartreflex_mpu */
-/* smartreflex_mpu dev_attr */
-static struct omap_smartreflex_dev_attr smartreflex_mpu_dev_attr = {
-	.sensor_voltdm_name	= "mpu",
-};
-
-static struct omap_hwmod dra7xx_smartreflex_mpu_hwmod = {
-	.name		= "smartreflex_mpu",
-	.class		= &dra7xx_smartreflex_hwmod_class,
-	.clkdm_name	= "coreaon_clkdm",
-	.main_clk	= "wkupaon_iclk_mux",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_COREAON_SMARTREFLEX_MPU_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_COREAON_SMARTREFLEX_MPU_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-	.dev_attr	= &smartreflex_mpu_dev_attr,
-};
-
-/*
- * 'spinlock' class
- *
- */
-
-static struct omap_hwmod_class_sysconfig dra7xx_spinlock_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_ENAWAKEUP |
-			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
-			   SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class dra7xx_spinlock_hwmod_class = {
-	.name	= "spinlock",
-	.sysc	= &dra7xx_spinlock_sysc,
-};
-
-/* spinlock */
-static struct omap_hwmod dra7xx_spinlock_hwmod = {
-	.name		= "spinlock",
-	.class		= &dra7xx_spinlock_hwmod_class,
-	.clkdm_name	= "l4cfg_clkdm",
-	.main_clk	= "l3_iclk_div",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_L4CFG_SPINLOCK_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_L4CFG_SPINLOCK_CONTEXT_OFFSET,
-		},
-	},
-};
-
-/*
  * 'timer' class
  *
  * This class contains several variants: ['timer_1ms', 'timer_secure',
@@ -1225,213 +819,6 @@ static struct omap_hwmod dra7xx_timer4_hwmod = {
 	},
 };
 
-/* timer5 */
-static struct omap_hwmod dra7xx_timer5_hwmod = {
-	.name		= "timer5",
-	.class		= &dra7xx_timer_hwmod_class,
-	.clkdm_name	= "ipu_clkdm",
-	.main_clk	= "timer5_gfclk_mux",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_IPU_TIMER5_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_IPU_TIMER5_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* timer6 */
-static struct omap_hwmod dra7xx_timer6_hwmod = {
-	.name		= "timer6",
-	.class		= &dra7xx_timer_hwmod_class,
-	.clkdm_name	= "ipu_clkdm",
-	.main_clk	= "timer6_gfclk_mux",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_IPU_TIMER6_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_IPU_TIMER6_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* timer7 */
-static struct omap_hwmod dra7xx_timer7_hwmod = {
-	.name		= "timer7",
-	.class		= &dra7xx_timer_hwmod_class,
-	.clkdm_name	= "ipu_clkdm",
-	.main_clk	= "timer7_gfclk_mux",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_IPU_TIMER7_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_IPU_TIMER7_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* timer8 */
-static struct omap_hwmod dra7xx_timer8_hwmod = {
-	.name		= "timer8",
-	.class		= &dra7xx_timer_hwmod_class,
-	.clkdm_name	= "ipu_clkdm",
-	.main_clk	= "timer8_gfclk_mux",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_IPU_TIMER8_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_IPU_TIMER8_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* timer9 */
-static struct omap_hwmod dra7xx_timer9_hwmod = {
-	.name		= "timer9",
-	.class		= &dra7xx_timer_hwmod_class,
-	.clkdm_name	= "l4per_clkdm",
-	.main_clk	= "timer9_gfclk_mux",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_L4PER_TIMER9_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_L4PER_TIMER9_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* timer10 */
-static struct omap_hwmod dra7xx_timer10_hwmod = {
-	.name		= "timer10",
-	.class		= &dra7xx_timer_1ms_hwmod_class,
-	.clkdm_name	= "l4per_clkdm",
-	.main_clk	= "timer10_gfclk_mux",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_L4PER_TIMER10_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_L4PER_TIMER10_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* timer11 */
-static struct omap_hwmod dra7xx_timer11_hwmod = {
-	.name		= "timer11",
-	.class		= &dra7xx_timer_hwmod_class,
-	.clkdm_name	= "l4per_clkdm",
-	.main_clk	= "timer11_gfclk_mux",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_L4PER_TIMER11_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_L4PER_TIMER11_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* timer12 */
-static struct omap_hwmod dra7xx_timer12_hwmod = {
-	.name		= "timer12",
-	.class		= &dra7xx_timer_hwmod_class,
-	.clkdm_name	= "wkupaon_clkdm",
-	.main_clk	= "secure_32k_clk_src_ck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_WKUPAON_TIMER12_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_WKUPAON_TIMER12_CONTEXT_OFFSET,
-		},
-	},
-};
-
-/* timer13 */
-static struct omap_hwmod dra7xx_timer13_hwmod = {
-	.name		= "timer13",
-	.class		= &dra7xx_timer_hwmod_class,
-	.clkdm_name	= "l4per3_clkdm",
-	.main_clk	= "timer13_gfclk_mux",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_L4PER3_TIMER13_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_L4PER3_TIMER13_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* timer14 */
-static struct omap_hwmod dra7xx_timer14_hwmod = {
-	.name		= "timer14",
-	.class		= &dra7xx_timer_hwmod_class,
-	.clkdm_name	= "l4per3_clkdm",
-	.main_clk	= "timer14_gfclk_mux",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_L4PER3_TIMER14_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_L4PER3_TIMER14_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* timer15 */
-static struct omap_hwmod dra7xx_timer15_hwmod = {
-	.name		= "timer15",
-	.class		= &dra7xx_timer_hwmod_class,
-	.clkdm_name	= "l4per3_clkdm",
-	.main_clk	= "timer15_gfclk_mux",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_L4PER3_TIMER15_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_L4PER3_TIMER15_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* timer16 */
-static struct omap_hwmod dra7xx_timer16_hwmod = {
-	.name		= "timer16",
-	.class		= &dra7xx_timer_hwmod_class,
-	.clkdm_name	= "l4per3_clkdm",
-	.main_clk	= "timer16_gfclk_mux",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_L4PER3_TIMER16_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_L4PER3_TIMER16_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* DES (the 'P' (public) device) */
-static struct omap_hwmod_class_sysconfig dra7xx_des_sysc = {
-	.rev_offs	= 0x0030,
-	.sysc_offs	= 0x0034,
-	.syss_offs	= 0x0038,
-	.sysc_flags	= SYSS_HAS_RESET_STATUS,
-};
-
-static struct omap_hwmod_class dra7xx_des_hwmod_class = {
-	.name	= "des",
-	.sysc	= &dra7xx_des_sysc,
-};
-
-/* DES */
-static struct omap_hwmod dra7xx_des_hwmod = {
-	.name		= "des",
-	.class		= &dra7xx_des_hwmod_class,
-	.clkdm_name	= "l4sec_clkdm",
-	.main_clk	= "l3_iclk_div",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_L4SEC_DES3DES_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_L4SEC_DES3DES_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_HWCTRL,
-		},
-	},
-};
-
 /*
  * 'usb_otg_ss' class
  *
@@ -1690,30 +1077,6 @@ static struct omap_hwmod_ocp_if dra7xx_l4_wkup__ctrl_module_wkup = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* l4_wkup -> dcan1 */
-static struct omap_hwmod_ocp_if dra7xx_l4_wkup__dcan1 = {
-	.master		= &dra7xx_l4_wkup_hwmod,
-	.slave		= &dra7xx_dcan1_hwmod,
-	.clk		= "wkupaon_iclk_mux",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per2 -> dcan2 */
-static struct omap_hwmod_ocp_if dra7xx_l4_per2__dcan2 = {
-	.master		= &dra7xx_l4_per2_hwmod,
-	.slave		= &dra7xx_dcan2_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> dma_system */
-static struct omap_hwmod_ocp_if dra7xx_l4_cfg__dma_system = {
-	.master		= &dra7xx_l4_cfg_hwmod,
-	.slave		= &dra7xx_dma_system_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /* l3_main_1 -> tpcc */
 static struct omap_hwmod_ocp_if dra7xx_l3_main_1__tpcc = {
 	.master		= &dra7xx_l3_main_1_hwmod,
@@ -1762,38 +1125,6 @@ static struct omap_hwmod_ocp_if dra7xx_l3_main_1__hdmi = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* l3_main_1 -> aes1 */
-static struct omap_hwmod_ocp_if dra7xx_l3_main_1__aes1 = {
-	.master		= &dra7xx_l3_main_1_hwmod,
-	.slave		= &dra7xx_aes1_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_1 -> aes2 */
-static struct omap_hwmod_ocp_if dra7xx_l3_main_1__aes2 = {
-	.master		= &dra7xx_l3_main_1_hwmod,
-	.slave		= &dra7xx_aes2_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_1 -> sha0 */
-static struct omap_hwmod_ocp_if dra7xx_l3_main_1__sha0 = {
-	.master		= &dra7xx_l3_main_1_hwmod,
-	.slave		= &dra7xx_sha0_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per1 -> elm */
-static struct omap_hwmod_ocp_if dra7xx_l4_per1__elm = {
-	.master		= &dra7xx_l4_per1_hwmod,
-	.slave		= &dra7xx_elm_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /* l3_main_1 -> gpmc */
 static struct omap_hwmod_ocp_if dra7xx_l3_main_1__gpmc = {
 	.master		= &dra7xx_l3_main_1_hwmod,
@@ -1810,22 +1141,6 @@ static struct omap_hwmod_ocp_if dra7xx_l4_cfg__mpu = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* l4_cfg -> ocp2scp1 */
-static struct omap_hwmod_ocp_if dra7xx_l4_cfg__ocp2scp1 = {
-	.master		= &dra7xx_l4_cfg_hwmod,
-	.slave		= &dra7xx_ocp2scp1_hwmod,
-	.clk		= "l4_root_clk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> ocp2scp3 */
-static struct omap_hwmod_ocp_if dra7xx_l4_cfg__ocp2scp3 = {
-	.master		= &dra7xx_l4_cfg_hwmod,
-	.slave		= &dra7xx_ocp2scp3_hwmod,
-	.clk		= "l4_root_clk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /* l3_main_1 -> pciess1 */
 static struct omap_hwmod_ocp_if dra7xx_l3_main_1__pciess1 = {
 	.master		= &dra7xx_l3_main_1_hwmod,
@@ -1882,30 +1197,6 @@ static struct omap_hwmod_ocp_if dra7xx_l4_cfg__sata = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* l4_cfg -> smartreflex_core */
-static struct omap_hwmod_ocp_if dra7xx_l4_cfg__smartreflex_core = {
-	.master		= &dra7xx_l4_cfg_hwmod,
-	.slave		= &dra7xx_smartreflex_core_hwmod,
-	.clk		= "l4_root_clk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> smartreflex_mpu */
-static struct omap_hwmod_ocp_if dra7xx_l4_cfg__smartreflex_mpu = {
-	.master		= &dra7xx_l4_cfg_hwmod,
-	.slave		= &dra7xx_smartreflex_mpu_hwmod,
-	.clk		= "l4_root_clk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> spinlock */
-static struct omap_hwmod_ocp_if dra7xx_l4_cfg__spinlock = {
-	.master		= &dra7xx_l4_cfg_hwmod,
-	.slave		= &dra7xx_spinlock_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /* l4_wkup -> timer1 */
 static struct omap_hwmod_ocp_if dra7xx_l4_wkup__timer1 = {
 	.master		= &dra7xx_l4_wkup_hwmod,
@@ -1938,110 +1229,6 @@ static struct omap_hwmod_ocp_if dra7xx_l4_per1__timer4 = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* l4_per3 -> timer5 */
-static struct omap_hwmod_ocp_if dra7xx_l4_per3__timer5 = {
-	.master		= &dra7xx_l4_per3_hwmod,
-	.slave		= &dra7xx_timer5_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per3 -> timer6 */
-static struct omap_hwmod_ocp_if dra7xx_l4_per3__timer6 = {
-	.master		= &dra7xx_l4_per3_hwmod,
-	.slave		= &dra7xx_timer6_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per3 -> timer7 */
-static struct omap_hwmod_ocp_if dra7xx_l4_per3__timer7 = {
-	.master		= &dra7xx_l4_per3_hwmod,
-	.slave		= &dra7xx_timer7_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per3 -> timer8 */
-static struct omap_hwmod_ocp_if dra7xx_l4_per3__timer8 = {
-	.master		= &dra7xx_l4_per3_hwmod,
-	.slave		= &dra7xx_timer8_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per1 -> timer9 */
-static struct omap_hwmod_ocp_if dra7xx_l4_per1__timer9 = {
-	.master		= &dra7xx_l4_per1_hwmod,
-	.slave		= &dra7xx_timer9_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per1 -> timer10 */
-static struct omap_hwmod_ocp_if dra7xx_l4_per1__timer10 = {
-	.master		= &dra7xx_l4_per1_hwmod,
-	.slave		= &dra7xx_timer10_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per1 -> timer11 */
-static struct omap_hwmod_ocp_if dra7xx_l4_per1__timer11 = {
-	.master		= &dra7xx_l4_per1_hwmod,
-	.slave		= &dra7xx_timer11_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_wkup -> timer12 */
-static struct omap_hwmod_ocp_if dra7xx_l4_wkup__timer12 = {
-	.master		= &dra7xx_l4_wkup_hwmod,
-	.slave		= &dra7xx_timer12_hwmod,
-	.clk		= "wkupaon_iclk_mux",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per3 -> timer13 */
-static struct omap_hwmod_ocp_if dra7xx_l4_per3__timer13 = {
-	.master		= &dra7xx_l4_per3_hwmod,
-	.slave		= &dra7xx_timer13_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per3 -> timer14 */
-static struct omap_hwmod_ocp_if dra7xx_l4_per3__timer14 = {
-	.master		= &dra7xx_l4_per3_hwmod,
-	.slave		= &dra7xx_timer14_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per3 -> timer15 */
-static struct omap_hwmod_ocp_if dra7xx_l4_per3__timer15 = {
-	.master		= &dra7xx_l4_per3_hwmod,
-	.slave		= &dra7xx_timer15_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per3 -> timer16 */
-static struct omap_hwmod_ocp_if dra7xx_l4_per3__timer16 = {
-	.master		= &dra7xx_l4_per3_hwmod,
-	.slave		= &dra7xx_timer16_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per1 -> des */
-static struct omap_hwmod_ocp_if dra7xx_l4_per1__des = {
-	.master		= &dra7xx_l4_per1_hwmod,
-	.slave		= &dra7xx_des_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /* l4_per3 -> usb_otg_ss1 */
 static struct omap_hwmod_ocp_if dra7xx_l4_per3__usb_otg_ss1 = {
 	.master		= &dra7xx_l4_per3_hwmod,
@@ -2106,30 +1293,6 @@ static struct omap_hwmod_ocp_if dra7xx_l4_per2__vcp2 = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* l4_per2 -> epwmss0 */
-static struct omap_hwmod_ocp_if dra7xx_l4_per2__epwmss0 = {
-	.master		= &dra7xx_l4_per2_hwmod,
-	.slave		= &dra7xx_epwmss0_hwmod,
-	.clk		= "l4_root_clk_div",
-	.user		= OCP_USER_MPU,
-};
-
-/* l4_per2 -> epwmss1 */
-static struct omap_hwmod_ocp_if dra7xx_l4_per2__epwmss1 = {
-	.master		= &dra7xx_l4_per2_hwmod,
-	.slave		= &dra7xx_epwmss1_hwmod,
-	.clk		= "l4_root_clk_div",
-	.user		= OCP_USER_MPU,
-};
-
-/* l4_per2 -> epwmss2 */
-static struct omap_hwmod_ocp_if dra7xx_l4_per2__epwmss2 = {
-	.master		= &dra7xx_l4_per2_hwmod,
-	.slave		= &dra7xx_epwmss2_hwmod,
-	.clk		= "l4_root_clk_div",
-	.user		= OCP_USER_MPU,
-};
-
 static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
 	&dra7xx_l3_main_1__dmm,
 	&dra7xx_l3_main_2__l3_instr,
@@ -2146,48 +1309,24 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
 	&dra7xx_l3_main_1__bb2d,
 	&dra7xx_l4_wkup__counter_32k,
 	&dra7xx_l4_wkup__ctrl_module_wkup,
-	&dra7xx_l4_wkup__dcan1,
-	&dra7xx_l4_per2__dcan2,
-	&dra7xx_l4_cfg__dma_system,
 	&dra7xx_l3_main_1__tpcc,
 	&dra7xx_l3_main_1__tptc0,
 	&dra7xx_l3_main_1__tptc1,
 	&dra7xx_l3_main_1__dss,
 	&dra7xx_l3_main_1__dispc,
 	&dra7xx_l3_main_1__hdmi,
-	&dra7xx_l3_main_1__aes1,
-	&dra7xx_l3_main_1__aes2,
-	&dra7xx_l3_main_1__sha0,
-	&dra7xx_l4_per1__elm,
 	&dra7xx_l3_main_1__gpmc,
 	&dra7xx_l4_cfg__mpu,
-	&dra7xx_l4_cfg__ocp2scp1,
-	&dra7xx_l4_cfg__ocp2scp3,
 	&dra7xx_l3_main_1__pciess1,
 	&dra7xx_l4_cfg__pciess1,
 	&dra7xx_l3_main_1__pciess2,
 	&dra7xx_l4_cfg__pciess2,
 	&dra7xx_l3_main_1__qspi,
 	&dra7xx_l4_cfg__sata,
-	&dra7xx_l4_cfg__smartreflex_core,
-	&dra7xx_l4_cfg__smartreflex_mpu,
-	&dra7xx_l4_cfg__spinlock,
 	&dra7xx_l4_wkup__timer1,
 	&dra7xx_l4_per1__timer2,
 	&dra7xx_l4_per1__timer3,
 	&dra7xx_l4_per1__timer4,
-	&dra7xx_l4_per3__timer5,
-	&dra7xx_l4_per3__timer6,
-	&dra7xx_l4_per3__timer7,
-	&dra7xx_l4_per3__timer8,
-	&dra7xx_l4_per1__timer9,
-	&dra7xx_l4_per1__timer10,
-	&dra7xx_l4_per1__timer11,
-	&dra7xx_l4_per3__timer13,
-	&dra7xx_l4_per3__timer14,
-	&dra7xx_l4_per3__timer15,
-	&dra7xx_l4_per3__timer16,
-	&dra7xx_l4_per1__des,
 	&dra7xx_l4_per3__usb_otg_ss1,
 	&dra7xx_l4_per3__usb_otg_ss2,
 	&dra7xx_l4_per3__usb_otg_ss3,
@@ -2195,15 +1334,6 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
 	&dra7xx_l4_per2__vcp1,
 	&dra7xx_l3_main_1__vcp2,
 	&dra7xx_l4_per2__vcp2,
-	&dra7xx_l4_per2__epwmss0,
-	&dra7xx_l4_per2__epwmss1,
-	&dra7xx_l4_per2__epwmss2,
-	NULL,
-};
-
-/* GP-only hwmod links */
-static struct omap_hwmod_ocp_if *dra7xx_gp_hwmod_ocp_ifs[] __initdata = {
-	&dra7xx_l4_wkup__timer12,
 	NULL,
 };
 
@@ -2256,8 +1386,5 @@ int __init dra7xx_hwmod_init(void)
 		}
 	}
 
-	if (!ret && omap_type() == OMAP2_DEVICE_TYPE_GP)
-		ret = omap_hwmod_register_links(dra7xx_gp_hwmod_ocp_ifs);
-
 	return ret;
 }
diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.h b/arch/arm/mach-omap2/omap_hwmod_common_data.h
index ca56563e3fec..c85cb8b5831c 100644
--- a/arch/arm/mach-omap2/omap_hwmod_common_data.h
+++ b/arch/arm/mach-omap2/omap_hwmod_common_data.h
@@ -98,7 +98,6 @@ extern struct omap_hwmod_class omap2_hdq1w_class;
 extern struct omap_hwmod_class omap2xxx_timer_hwmod_class;
 extern struct omap_hwmod_class omap2xxx_wd_timer_hwmod_class;
 extern struct omap_hwmod_class omap2xxx_gpio_hwmod_class;
-extern struct omap_hwmod_class omap2xxx_dma_hwmod_class;
 extern struct omap_hwmod_class omap2xxx_mailbox_hwmod_class;
 extern struct omap_hwmod_class omap2xxx_mcspi_class;
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_reset.c b/arch/arm/mach-omap2/omap_hwmod_reset.c
index d5ddba00bb73..143623bb056d 100644
--- a/arch/arm/mach-omap2/omap_hwmod_reset.c
+++ b/arch/arm/mach-omap2/omap_hwmod_reset.c
@@ -26,8 +26,6 @@
 #include <linux/kernel.h>
 #include <linux/errno.h>
 
-#include <sound/aess.h>
-
 #include "omap_hwmod.h"
 #include "common.h"
 
@@ -41,28 +39,6 @@
 #define OMAP_RTC_MAX_READY_TIME	50
 
 /**
- * omap_hwmod_aess_preprogram - enable AESS internal autogating
- * @oh: struct omap_hwmod *
- *
- * The AESS will not IdleAck to the PRCM until its internal autogating
- * is enabled.  Since internal autogating is disabled by default after
- * AESS reset, we must enable autogating after the hwmod code resets
- * the AESS.  Returns 0.
- */
-int omap_hwmod_aess_preprogram(struct omap_hwmod *oh)
-{
-	void __iomem *va;
-
-	va = omap_hwmod_get_mpu_rt_va(oh);
-	if (!va)
-		return -EINVAL;
-
-	aess_enable_autogating(va);
-
-	return 0;
-}
-
-/**
  * omap_rtc_wait_not_busy - Wait for the RTC BUSY flag
  * @oh: struct omap_hwmod *
  *
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index e95c224ffc4d..dbb7c2acef31 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -23,6 +23,7 @@
 #include <linux/platform_data/ti-sysc.h>
 #include <linux/platform_data/wkup_m3.h>
 #include <linux/platform_data/asoc-ti-mcbsp.h>
+#include <linux/platform_data/ti-prm.h>
 
 #include "clockdomain.h"
 #include "common.h"
@@ -42,6 +43,17 @@ struct pdata_init {
 static struct of_dev_auxdata omap_auxdata_lookup[];
 static struct twl4030_gpio_platform_data twl_gpio_auxdata;
 
+#if IS_ENABLED(CONFIG_OMAP_IOMMU)
+int omap_iommu_set_pwrdm_constraint(struct platform_device *pdev, bool request,
+				    u8 *pwrst);
+#else
+static inline int omap_iommu_set_pwrdm_constraint(struct platform_device *pdev,
+						  bool request, u8 *pwrst)
+{
+	return 0;
+}
+#endif
+
 #ifdef CONFIG_MACH_NOKIA_N8X0
 static void __init omap2420_n8x0_legacy_init(void)
 {
@@ -260,16 +272,6 @@ static void __init omap3_pandora_legacy_init(void)
 }
 #endif /* CONFIG_ARCH_OMAP3 */
 
-#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
-static struct iommu_platform_data omap4_iommu_pdata = {
-	.reset_name = "mmu_cache",
-	.assert_reset = omap_device_assert_hardreset,
-	.deassert_reset = omap_device_deassert_hardreset,
-	.device_enable = omap_device_enable,
-	.device_idle = omap_device_idle,
-};
-#endif
-
 #if defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_AM43XX)
 static struct wkup_m3_platform_data wkup_m3_data = {
 	.reset_name = "wkup_m3",
@@ -285,6 +287,10 @@ static void __init omap5_uevm_legacy_init(void)
 #endif
 
 #ifdef CONFIG_SOC_DRA7XX
+static struct iommu_platform_data dra7_ipu1_dsp_iommu_pdata = {
+	.set_pwrdm_constraint = omap_iommu_set_pwrdm_constraint,
+};
+
 static struct omap_hsmmc_platform_data dra7_hsmmc_data_mmc1;
 static struct omap_hsmmc_platform_data dra7_hsmmc_data_mmc2;
 static struct omap_hsmmc_platform_data dra7_hsmmc_data_mmc3;
@@ -412,6 +418,12 @@ void omap_pcs_legacy_init(int irq, void (*rearm)(void))
 	pcs_pdata.rearm = rearm;
 }
 
+static struct ti_prm_platform_data ti_prm_pdata = {
+	.clkdm_deny_idle = clkdm_deny_idle,
+	.clkdm_allow_idle = clkdm_allow_idle,
+	.clkdm_lookup = clkdm_lookup,
+};
+
 /*
  * GPIOs for TWL are initialized by the I2C bus and need custom
  * handing until DSS has device tree bindings.
@@ -492,10 +504,6 @@ static struct of_dev_auxdata omap_auxdata_lookup[] = {
 		       &wkup_m3_data),
 #endif
 #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
-	OF_DEV_AUXDATA("ti,omap4-iommu", 0x4a066000, "4a066000.mmu",
-		       &omap4_iommu_pdata),
-	OF_DEV_AUXDATA("ti,omap4-iommu", 0x55082000, "55082000.mmu",
-		       &omap4_iommu_pdata),
 	OF_DEV_AUXDATA("ti,omap4-smartreflex-iva", 0x4a0db000,
 		       "4a0db000.smartreflex", &omap_sr_pdata[OMAP_SR_IVA]),
 	OF_DEV_AUXDATA("ti,omap4-smartreflex-core", 0x4a0dd000,
@@ -510,10 +518,18 @@ static struct of_dev_auxdata omap_auxdata_lookup[] = {
 		       &dra7_hsmmc_data_mmc2),
 	OF_DEV_AUXDATA("ti,dra7-hsmmc", 0x480ad000, "480ad000.mmc",
 		       &dra7_hsmmc_data_mmc3),
+	OF_DEV_AUXDATA("ti,dra7-dsp-iommu", 0x40d01000, "40d01000.mmu",
+		       &dra7_ipu1_dsp_iommu_pdata),
+	OF_DEV_AUXDATA("ti,dra7-dsp-iommu", 0x41501000, "41501000.mmu",
+		       &dra7_ipu1_dsp_iommu_pdata),
+	OF_DEV_AUXDATA("ti,dra7-iommu", 0x58882000, "58882000.mmu",
+		       &dra7_ipu1_dsp_iommu_pdata),
 #endif
 	/* Common auxdata */
 	OF_DEV_AUXDATA("ti,sysc", 0, NULL, &ti_sysc_pdata),
 	OF_DEV_AUXDATA("pinctrl-single", 0, NULL, &pcs_pdata),
+	OF_DEV_AUXDATA("ti,omap-prm-inst", 0, NULL, &ti_prm_pdata),
+	OF_DEV_AUXDATA("ti,omap-sdma", 0, NULL, &dma_plat_info),
 	{ /* sentinel */ },
 };
 
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index 1581b6a6a416..6953c47d8dc6 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -83,8 +83,6 @@ static int omap2_enter_full_retention(void)
 	l = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0) | OMAP24XX_USBSTANDBYCTRL;
 	omap_ctrl_writel(l, OMAP2_CONTROL_DEVCONF0);
 
-	cpu_cluster_pm_enter();
-
 	/* One last check for pending IRQs to avoid extra latency due
 	 * to sleeping unnecessarily. */
 	if (omap_irq_pending())
@@ -96,8 +94,6 @@ static int omap2_enter_full_retention(void)
 			   OMAP_SDRC_REGADDR(SDRC_POWER));
 
 no_sleep:
-	cpu_cluster_pm_exit();
-
 	clk_enable(osc_ck);
 
 	/* clear CORE wake-up events */
@@ -162,25 +158,27 @@ static int omap2_can_sleep(void)
 		return 0;
 	if (__clk_is_enabled(osc_ck))
 		return 0;
-	if (omap_dma_running())
-		return 0;
 
 	return 1;
 }
 
 static void omap2_pm_idle(void)
 {
-	if (!omap2_can_sleep()) {
-		if (omap_irq_pending())
-			return;
-		omap2_enter_mpu_retention();
-		return;
-	}
+	int error;
 
 	if (omap_irq_pending())
 		return;
 
+	error = cpu_cluster_pm_enter();
+	if (error || !omap2_can_sleep()) {
+		omap2_enter_mpu_retention();
+		goto out_cpu_cluster_pm;
+	}
+
 	omap2_enter_full_retention();
+
+out_cpu_cluster_pm:
+	cpu_cluster_pm_exit();
 }
 
 static void __init prcm_setup_regs(void)
diff --git a/arch/arm/mach-omap2/pm33xx-core.c b/arch/arm/mach-omap2/pm33xx-core.c
index f11442ed3eff..7461b0346549 100644
--- a/arch/arm/mach-omap2/pm33xx-core.c
+++ b/arch/arm/mach-omap2/pm33xx-core.c
@@ -28,6 +28,7 @@
 #include "prm33xx.h"
 #include "soc.h"
 #include "sram.h"
+#include "omap-secure.h"
 
 static struct powerdomain *cefuse_pwrdm, *gfx_pwrdm, *per_pwrdm, *mpu_pwrdm;
 static struct clockdomain *gfx_l4ls_clkdm;
@@ -166,6 +167,16 @@ static int am43xx_suspend(unsigned int state, int (*fn)(unsigned long),
 {
 	int ret = 0;
 
+	/* Suspend secure side on HS devices */
+	if (omap_type() != OMAP2_DEVICE_TYPE_GP) {
+		if (optee_available)
+			omap_smccc_smc(AM43xx_PPA_SVC_PM_SUSPEND, 0);
+		else
+			omap_secure_dispatcher(AM43xx_PPA_SVC_PM_SUSPEND,
+					       FLAG_START_CRITICAL,
+					       0, 0, 0, 0, 0);
+	}
+
 	amx3_pre_suspend_common();
 	scu_power_mode(scu_base, SCU_PM_POWEROFF);
 	ret = cpu_suspend(args, fn);
@@ -174,6 +185,19 @@ static int am43xx_suspend(unsigned int state, int (*fn)(unsigned long),
 	if (!am43xx_check_off_mode_enable())
 		amx3_post_suspend_common();
 
+	/*
+	 * Resume secure side on HS devices.
+	 *
+	 * Note that even on systems with OP-TEE available this resume call is
+	 * issued to the ROM. This is because upon waking from suspend the ROM
+	 * is restored as the secure monitor. On systems with OP-TEE ROM will
+	 * restore OP-TEE during this call.
+	 */
+	if (omap_type() != OMAP2_DEVICE_TYPE_GP)
+		omap_secure_dispatcher(AM43xx_PPA_SVC_PM_RESUME,
+				       FLAG_START_CRITICAL,
+				       0, 0, 0, 0, 0);
+
 	return ret;
 }
 
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 54254fc92c2e..e66e9948636c 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -25,7 +25,6 @@
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
-#include <linux/omap-dma.h>
 #include <linux/omap-gpmc.h>
 
 #include <trace/events/power.h>
@@ -85,7 +84,6 @@ static void omap3_core_save_context(void)
 	omap3_gpmc_save_context();
 	/* Save the system control module context, padconf already save above*/
 	omap3_control_save_context();
-	omap_dma_global_context_save();
 }
 
 static void omap3_core_restore_context(void)
@@ -96,7 +94,6 @@ static void omap3_core_restore_context(void)
 	omap3_gpmc_restore_context();
 	/* Restore the interrupt controller context */
 	omap_intc_restore_context();
-	omap_dma_global_context_restore();
 }
 
 /*
@@ -547,9 +544,7 @@ int __init omap3_pm_init(void)
 
 		local_irq_disable();
 
-		omap_dma_global_context_save();
 		omap3_save_secure_ram_context();
-		omap_dma_global_context_restore();
 
 		local_irq_enable();
 	}
diff --git a/arch/arm/mach-omap2/prcm43xx.h b/arch/arm/mach-omap2/prcm43xx.h
index e2ad14e77064..7078a61c1d3f 100644
--- a/arch/arm/mach-omap2/prcm43xx.h
+++ b/arch/arm/mach-omap2/prcm43xx.h
@@ -68,6 +68,7 @@
 #define AM43XX_CM_PER_ICSS_CDOFFS			0x0300
 #define AM43XX_CM_PER_L4LS_CDOFFS			0x0400
 #define AM43XX_CM_PER_EMIF_CDOFFS			0x0700
+#define AM43XX_CM_PER_LCDC_CDOFFS			0x0800
 #define AM43XX_CM_PER_DSS_CDOFFS			0x0a00
 #define AM43XX_CM_PER_CPSW_CDOFFS			0x0b00
 #define AM43XX_CM_PER_OCPWP_L3_CDOFFS			0x0c00
diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c
index eba917d69c0a..35dd3adb7712 100644
--- a/arch/arm/mach-pxa/colibri-pxa320.c
+++ b/arch/arm/mach-pxa/colibri-pxa320.c
@@ -11,9 +11,9 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
+#include <linux/gpio/machine.h>
 #include <linux/gpio.h>
 #include <linux/interrupt.h>
-#include <linux/usb/gpio_vbus.h>
 
 #include <asm/mach-types.h>
 #include <linux/sizes.h>
@@ -144,17 +144,18 @@ static inline void __init colibri_pxa320_init_eth(void) {}
 #endif /* CONFIG_AX88796 */
 
 #if defined(CONFIG_USB_PXA27X)||defined(CONFIG_USB_PXA27X_MODULE)
-static struct gpio_vbus_mach_info colibri_pxa320_gpio_vbus_info = {
-	.gpio_vbus		= mfp_to_gpio(MFP_PIN_GPIO96),
-	.gpio_pullup		= -1,
+static struct gpiod_lookup_table gpio_vbus_gpiod_table = {
+	.dev_id = "gpio-vbus",
+	.table = {
+		GPIO_LOOKUP("gpio-pxa", MFP_PIN_GPIO96,
+			    "vbus", GPIO_ACTIVE_HIGH),
+		{ },
+	},
 };
 
 static struct platform_device colibri_pxa320_gpio_vbus = {
 	.name	= "gpio-vbus",
 	.id	= -1,
-	.dev	= {
-		.platform_data	= &colibri_pxa320_gpio_vbus_info,
-	},
 };
 
 static void colibri_pxa320_udc_command(int cmd)
@@ -173,6 +174,7 @@ static struct pxa2xx_udc_mach_info colibri_pxa320_udc_info __initdata = {
 static void __init colibri_pxa320_init_udc(void)
 {
 	pxa_set_udc_info(&colibri_pxa320_udc_info);
+	gpiod_add_lookup_table(&gpio_vbus_gpiod_table);
 	platform_device_register(&colibri_pxa320_gpio_vbus);
 }
 #else
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index 91f7c3e40065..f37c44b6139d 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -14,6 +14,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/clk-provider.h>
+#include <linux/gpio/machine.h>
 #include <linux/gpio.h>
 #include <linux/delay.h>
 #include <linux/platform_device.h>
@@ -22,7 +23,6 @@
 #include <linux/mfd/t7l66xb.h>
 #include <linux/mtd/rawnand.h>
 #include <linux/mtd/partitions.h>
-#include <linux/usb/gpio_vbus.h>
 #include <linux/memblock.h>
 
 #include <video/w100fb.h>
@@ -51,18 +51,20 @@ void __init eseries_fixup(struct tag *tags, char **cmdline)
 		memblock_add(0xa0000000, SZ_64M);
 }
 
-struct gpio_vbus_mach_info e7xx_udc_info = {
-	.gpio_vbus   = GPIO_E7XX_USB_DISC,
-	.gpio_pullup = GPIO_E7XX_USB_PULLUP,
-	.gpio_pullup_inverted = 1
+static struct gpiod_lookup_table e7xx_gpio_vbus_gpiod_table __maybe_unused = {
+	.dev_id = "gpio-vbus",
+	.table = {
+		GPIO_LOOKUP("gpio-pxa", GPIO_E7XX_USB_DISC,
+			    "vbus", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("gpio-pxa", GPIO_E7XX_USB_PULLUP,
+			    "pullup", GPIO_ACTIVE_LOW),
+		{ },
+	},
 };
 
 static struct platform_device e7xx_gpio_vbus __maybe_unused = {
 	.name	= "gpio-vbus",
 	.id	= -1,
-	.dev	= {
-		.platform_data	= &e7xx_udc_info,
-	},
 };
 
 struct pxaficp_platform_data e7xx_ficp_platform_data = {
@@ -165,6 +167,7 @@ static void __init e330_init(void)
 	pxa_set_stuart_info(NULL);
 	eseries_register_clks();
 	eseries_get_tmio_gpios();
+	gpiod_add_lookup_table(&e7xx_gpio_vbus_gpiod_table);
 	platform_add_devices(ARRAY_AND_SIZE(e330_devices));
 }
 
@@ -216,6 +219,7 @@ static void __init e350_init(void)
 	pxa_set_stuart_info(NULL);
 	eseries_register_clks();
 	eseries_get_tmio_gpios();
+	gpiod_add_lookup_table(&e7xx_gpio_vbus_gpiod_table);
 	platform_add_devices(ARRAY_AND_SIZE(e350_devices));
 }
 
@@ -340,6 +344,7 @@ static void __init e400_init(void)
 	eseries_register_clks();
 	eseries_get_tmio_gpios();
 	pxa_set_fb_info(NULL, &e400_pxafb_mach_info);
+	gpiod_add_lookup_table(&e7xx_gpio_vbus_gpiod_table);
 	platform_add_devices(ARRAY_AND_SIZE(e400_devices));
 }
 
@@ -534,6 +539,7 @@ static void __init e740_init(void)
 	clk_add_alias("CLK_CK48M", e740_t7l66xb_device.name,
 			"UDCCLK", &pxa25x_device_udc.dev),
 	eseries_get_tmio_gpios();
+	gpiod_add_lookup_table(&e7xx_gpio_vbus_gpiod_table);
 	platform_add_devices(ARRAY_AND_SIZE(e740_devices));
 	pxa_set_ac97_info(NULL);
 	pxa_set_ficp_info(&e7xx_ficp_platform_data);
@@ -733,6 +739,7 @@ static void __init e750_init(void)
 	clk_add_alias("CLK_CK3P6MI", e750_tc6393xb_device.name,
 			"GPIO11_CLK", NULL),
 	eseries_get_tmio_gpios();
+	gpiod_add_lookup_table(&e7xx_gpio_vbus_gpiod_table);
 	platform_add_devices(ARRAY_AND_SIZE(e750_devices));
 	pxa_set_ac97_info(NULL);
 	pxa_set_ficp_info(&e7xx_ficp_platform_data);
@@ -888,18 +895,20 @@ static struct platform_device e800_fb_device = {
 
 /* --------------------------- UDC definitions --------------------------- */
 
-static struct gpio_vbus_mach_info e800_udc_info = {
-	.gpio_vbus   = GPIO_E800_USB_DISC,
-	.gpio_pullup = GPIO_E800_USB_PULLUP,
-	.gpio_pullup_inverted = 1
+static struct gpiod_lookup_table e800_gpio_vbus_gpiod_table = {
+	.dev_id = "gpio-vbus",
+	.table = {
+		GPIO_LOOKUP("gpio-pxa", GPIO_E800_USB_DISC,
+			    "vbus", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("gpio-pxa", GPIO_E800_USB_PULLUP,
+			    "pullup", GPIO_ACTIVE_LOW),
+		{ },
+	},
 };
 
 static struct platform_device e800_gpio_vbus = {
 	.name	= "gpio-vbus",
 	.id	= -1,
-	.dev	= {
-		.platform_data	= &e800_udc_info,
-	},
 };
 
 
@@ -949,6 +958,7 @@ static void __init e800_init(void)
 	clk_add_alias("CLK_CK3P6MI", e800_tc6393xb_device.name,
 			"GPIO11_CLK", NULL),
 	eseries_get_tmio_gpios();
+	gpiod_add_lookup_table(&e800_gpio_vbus_gpiod_table);
 	platform_add_devices(ARRAY_AND_SIZE(e800_devices));
 	pxa_set_ac97_info(NULL);
 }
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index 4b4589cf431f..49dd618b10f7 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -20,10 +20,10 @@
 #include <linux/delay.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/gpio/machine.h>
 #include <linux/gpio.h>
 #include <linux/err.h>
 #include <linux/clk.h>
-#include <linux/usb/gpio_vbus.h>
 
 #include <asm/setup.h>
 #include <asm/memory.h>
@@ -101,21 +101,25 @@ static void __init gumstix_mmc_init(void)
 #endif
 
 #ifdef CONFIG_USB_PXA25X
-static struct gpio_vbus_mach_info gumstix_udc_info = {
-	.gpio_vbus		= GPIO_GUMSTIX_USB_GPIOn,
-	.gpio_pullup		= GPIO_GUMSTIX_USB_GPIOx,
+static struct gpiod_lookup_table gumstix_gpio_vbus_gpiod_table = {
+	.dev_id = "gpio-vbus",
+	.table = {
+		GPIO_LOOKUP("gpio-pxa", GPIO_GUMSTIX_USB_GPIOn,
+			    "vbus", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("gpio-pxa", GPIO_GUMSTIX_USB_GPIOx,
+			    "pullup", GPIO_ACTIVE_HIGH),
+		{ },
+	},
 };
 
 static struct platform_device gumstix_gpio_vbus = {
 	.name	= "gpio-vbus",
 	.id	= -1,
-	.dev	= {
-		.platform_data	= &gumstix_udc_info,
-	},
 };
 
 static void __init gumstix_udc_init(void)
 {
+	gpiod_add_lookup_table(&gumstix_gpio_vbus_gpiod_table);
 	platform_device_register(&gumstix_gpio_vbus);
 }
 #else
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index 311268d186ab..238a751a8797 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -34,7 +34,6 @@
 #include <linux/spi/ads7846.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/pxa2xx_spi.h>
-#include <linux/usb/gpio_vbus.h>
 #include <linux/platform_data/i2c-pxa.h>
 
 #include <mach/hardware.h>
@@ -578,18 +577,24 @@ static struct pwm_lookup hx4700_pwm_lookup[] = {
  * USB "Transceiver"
  */
 
-static struct gpio_vbus_mach_info gpio_vbus_info = {
-	.gpio_pullup        = GPIO76_HX4700_USBC_PUEN,
-	.gpio_vbus          = GPIOD14_nUSBC_DETECT,
-	.gpio_vbus_inverted = 1,
+static struct gpiod_lookup_table gpio_vbus_gpiod_table = {
+	.dev_id = "gpio-vbus",
+	.table = {
+		/* This GPIO is on ASIC3 */
+		GPIO_LOOKUP("asic3",
+			    /* Convert to a local offset on the ASIC3 */
+			    GPIOD14_nUSBC_DETECT - HX4700_ASIC3_GPIO_BASE,
+			    "vbus", GPIO_ACTIVE_LOW),
+		/* This one is on the primary SOC GPIO */
+		GPIO_LOOKUP("gpio-pxa", GPIO76_HX4700_USBC_PUEN,
+			    "pullup", GPIO_ACTIVE_HIGH),
+		{ },
+	},
 };
 
 static struct platform_device gpio_vbus = {
 	.name          = "gpio-vbus",
 	.id            = -1,
-	.dev = {
-		.platform_data = &gpio_vbus_info,
-	},
 };
 
 static struct pxa2xx_udc_mach_info hx4700_udc_info;
@@ -883,6 +888,7 @@ static void __init hx4700_init(void)
 	pxa_set_stuart_info(NULL);
 
 	gpiod_add_lookup_table(&bq24022_gpiod_table);
+	gpiod_add_lookup_table(&gpio_vbus_gpiod_table);
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 	pwm_add_table(hx4700_pwm_lookup, ARRAY_SIZE(hx4700_pwm_lookup));
 
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 868dc0cf4859..5d0591f93f4d 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -27,7 +27,6 @@
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/gpio-regulator.h>
 #include <linux/regulator/machine.h>
-#include <linux/usb/gpio_vbus.h>
 #include <linux/platform_data/i2c-pxa.h>
 
 #include <mach/hardware.h>
@@ -506,9 +505,20 @@ static struct resource gpio_vbus_resource = {
 	.end	= IRQ_MAGICIAN_VBUS,
 };
 
-static struct gpio_vbus_mach_info gpio_vbus_info = {
-	.gpio_pullup	= GPIO27_MAGICIAN_USBC_PUEN,
-	.gpio_vbus	= EGPIO_MAGICIAN_CABLE_VBUS,
+static struct gpiod_lookup_table gpio_vbus_gpiod_table = {
+	.dev_id = "gpio-vbus",
+	.table = {
+		/*
+		 * EGPIO on register 4 index 1, the second EGPIO chip
+		 * starts at register 4 so this will be at index 1 on that
+		 * chip.
+		 */
+		GPIO_LOOKUP("htc-egpio-1", 1,
+			    "vbus", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("gpio-pxa", GPIO27_MAGICIAN_USBC_PUEN,
+			    "pullup", GPIO_ACTIVE_HIGH),
+		{ },
+	},
 };
 
 static struct platform_device gpio_vbus = {
@@ -516,9 +526,6 @@ static struct platform_device gpio_vbus = {
 	.id		= -1,
 	.num_resources	= 1,
 	.resource	= &gpio_vbus_resource,
-	.dev = {
-		.platform_data = &gpio_vbus_info,
-	},
 };
 
 /*
@@ -1032,6 +1039,7 @@ static void __init magician_init(void)
 		ARRAY_SIZE(pwm_backlight_supply), 5000000);
 
 	gpiod_add_lookup_table(&bq24022_gpiod_table);
+	gpiod_add_lookup_table(&gpio_vbus_gpiod_table);
 	platform_add_devices(ARRAY_AND_SIZE(devices));
 }
 
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index c360023a989c..0b8bae9610f1 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -24,7 +24,6 @@
 #include <linux/power_supply.h>
 #include <linux/wm97xx.h>
 #include <linux/mtd/physmap.h>
-#include <linux/usb/gpio_vbus.h>
 #include <linux/reboot.h>
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/max1586.h>
@@ -368,10 +367,13 @@ static struct pxa2xx_udc_mach_info mioa701_udc_info = {
 	.gpio_pullup	  = GPIO22_USB_ENABLE,
 };
 
-struct gpio_vbus_mach_info gpio_vbus_data = {
-	.gpio_vbus = GPIO13_nUSB_DETECT,
-	.gpio_vbus_inverted = 1,
-	.gpio_pullup = -1,
+static struct gpiod_lookup_table gpio_vbus_gpiod_table = {
+	.dev_id = "gpio-vbus",
+	.table = {
+		GPIO_LOOKUP("gpio-pxa", GPIO13_nUSB_DETECT,
+			    "vbus", GPIO_ACTIVE_LOW),
+		{ },
+	},
 };
 
 /*
@@ -677,7 +679,7 @@ MIO_SIMPLE_DEV(mioa701_led,	  "leds-gpio",	    &gpio_led_info)
 MIO_SIMPLE_DEV(pxa2xx_pcm,	  "pxa2xx-pcm",	    NULL)
 MIO_SIMPLE_DEV(mioa701_sound,	  "mioa701-wm9713", NULL)
 MIO_SIMPLE_DEV(mioa701_board,	  "mioa701-board",  NULL)
-MIO_SIMPLE_DEV(gpio_vbus,	  "gpio-vbus",      &gpio_vbus_data);
+MIO_SIMPLE_DEV(gpio_vbus,	  "gpio-vbus",      NULL);
 
 static struct platform_device *devices[] __initdata = {
 	&mioa701_gpio_keys,
@@ -750,6 +752,7 @@ static void __init mioa701_machine_init(void)
 	pxa_set_ac97_info(&mioa701_ac97_info);
 	pm_power_off = mioa701_poweroff;
 	pwm_add_table(mioa701_pwm_lookup, ARRAY_SIZE(mioa701_pwm_lookup));
+	gpiod_add_lookup_table(&gpio_vbus_gpiod_table);
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 	gsm_init();
 
diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c
index 3ad0b3915ae1..b600b63af3a6 100644
--- a/arch/arm/mach-pxa/palm27x.c
+++ b/arch/arm/mach-pxa/palm27x.c
@@ -13,10 +13,10 @@
 #include <linux/pda_power.h>
 #include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
+#include <linux/gpio/machine.h>
 #include <linux/gpio.h>
 #include <linux/wm97xx.h>
 #include <linux/power_supply.h>
-#include <linux/usb/gpio_vbus.h>
 #include <linux/regulator/max1586.h>
 #include <linux/platform_data/i2c-pxa.h>
 
@@ -159,32 +159,32 @@ void __init palm27x_lcd_init(int power, struct pxafb_mode_info *mode)
  ******************************************************************************/
 #if	defined(CONFIG_USB_PXA27X) || \
 	defined(CONFIG_USB_PXA27X_MODULE)
-static struct gpio_vbus_mach_info palm27x_udc_info = {
-	.gpio_vbus_inverted	= 1,
+
+/* The actual GPIO offsets get filled in in the palm27x_udc_init() call */
+static struct gpiod_lookup_table palm27x_udc_gpiod_table = {
+	.dev_id = "gpio-vbus",
+	.table = {
+		GPIO_LOOKUP("gpio-pxa", 0,
+			    "vbus", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("gpio-pxa", 0,
+			    "pullup", GPIO_ACTIVE_HIGH),
+		{ },
+	},
 };
 
 static struct platform_device palm27x_gpio_vbus = {
 	.name	= "gpio-vbus",
 	.id	= -1,
-	.dev	= {
-		.platform_data	= &palm27x_udc_info,
-	},
 };
 
 void __init palm27x_udc_init(int vbus, int pullup, int vbus_inverted)
 {
-	palm27x_udc_info.gpio_vbus	= vbus;
-	palm27x_udc_info.gpio_pullup	= pullup;
-
-	palm27x_udc_info.gpio_vbus_inverted = vbus_inverted;
-
-	if (!gpio_request(pullup, "USB Pullup")) {
-		gpio_direction_output(pullup,
-			palm27x_udc_info.gpio_vbus_inverted);
-		gpio_free(pullup);
-	} else
-		return;
+	palm27x_udc_gpiod_table.table[0].chip_hwnum = vbus;
+	palm27x_udc_gpiod_table.table[1].chip_hwnum = pullup;
+	if (vbus_inverted)
+		palm27x_udc_gpiod_table.table[0].flags = GPIO_ACTIVE_LOW;
 
+	gpiod_add_lookup_table(&palm27x_udc_gpiod_table);
 	platform_device_register(&palm27x_gpio_vbus);
 }
 #endif
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index 902403367786..7c7cbb4e677e 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -23,7 +23,6 @@
 #include <linux/gpio.h>
 #include <linux/wm97xx.h>
 #include <linux/power_supply.h>
-#include <linux/usb/gpio_vbus.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c
index f52bd155e825..fda9deaaae02 100644
--- a/arch/arm/mach-pxa/palmtc.c
+++ b/arch/arm/mach-pxa/palmtc.c
@@ -23,7 +23,6 @@
 #include <linux/power_supply.h>
 #include <linux/gpio_keys.h>
 #include <linux/mtd/physmap.h>
-#include <linux/usb/gpio_vbus.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -319,22 +318,25 @@ static inline void palmtc_mkp_init(void) {}
  * UDC
  ******************************************************************************/
 #if defined(CONFIG_USB_PXA25X)||defined(CONFIG_USB_PXA25X_MODULE)
-static struct gpio_vbus_mach_info palmtc_udc_info = {
-	.gpio_vbus		= GPIO_NR_PALMTC_USB_DETECT_N,
-	.gpio_vbus_inverted	= 1,
-	.gpio_pullup		= GPIO_NR_PALMTC_USB_POWER,
+static struct gpiod_lookup_table palmtc_udc_gpiod_table = {
+	.dev_id = "gpio-vbus",
+	.table = {
+		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTC_USB_DETECT_N,
+			    "vbus", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTC_USB_POWER,
+			    "pullup", GPIO_ACTIVE_HIGH),
+		{ },
+	},
 };
 
 static struct platform_device palmtc_gpio_vbus = {
 	.name	= "gpio-vbus",
 	.id	= -1,
-	.dev	= {
-		.platform_data	= &palmtc_udc_info,
-	},
 };
 
 static void __init palmtc_udc_init(void)
 {
+	gpiod_add_lookup_table(&palmtc_udc_gpiod_table);
 	platform_device_register(&palmtc_gpio_vbus);
 };
 #else
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
index a92b9665f425..7171014fd311 100644
--- a/arch/arm/mach-pxa/palmte2.c
+++ b/arch/arm/mach-pxa/palmte2.c
@@ -23,7 +23,6 @@
 #include <linux/gpio.h>
 #include <linux/wm97xx.h>
 #include <linux/power_supply.h>
-#include <linux/usb/gpio_vbus.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -201,18 +200,20 @@ static struct pxaficp_platform_data palmte2_ficp_platform_data = {
 /******************************************************************************
  * UDC
  ******************************************************************************/
-static struct gpio_vbus_mach_info palmte2_udc_info = {
-	.gpio_vbus		= GPIO_NR_PALMTE2_USB_DETECT_N,
-	.gpio_vbus_inverted	= 1,
-	.gpio_pullup		= GPIO_NR_PALMTE2_USB_PULLUP,
+static struct gpiod_lookup_table palmte2_udc_gpiod_table = {
+	.dev_id = "gpio-vbus",
+	.table = {
+		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTE2_USB_DETECT_N,
+			    "vbus", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTE2_USB_PULLUP,
+			    "pullup", GPIO_ACTIVE_HIGH),
+		{ },
+	},
 };
 
 static struct platform_device palmte2_gpio_vbus = {
 	.name	= "gpio-vbus",
 	.id	= -1,
-	.dev	= {
-		.platform_data	= &palmte2_udc_info,
-	},
 };
 
 /******************************************************************************
@@ -368,6 +369,7 @@ static void __init palmte2_init(void)
 	pxa_set_ficp_info(&palmte2_ficp_platform_data);
 
 	pwm_add_table(palmte2_pwm_lookup, ARRAY_SIZE(palmte2_pwm_lookup));
+	gpiod_add_lookup_table(&palmte2_udc_gpiod_table);
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
 
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index 926593ecf1c9..07332c92c9f7 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -23,7 +23,6 @@
 #include <linux/gpio.h>
 #include <linux/wm97xx.h>
 #include <linux/power_supply.h>
-#include <linux/usb/gpio_vbus.h>
 #include <linux/mtd/platnand.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/physmap.h>
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index 77fe2e367324..4df443943579 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -25,7 +25,6 @@
 #include <linux/gpio.h>
 #include <linux/wm97xx.h>
 #include <linux/power_supply.h>
-#include <linux/usb/gpio_vbus.h>
 #include <linux/platform_data/i2c-gpio.h>
 #include <linux/gpio/machine.h>
 
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 4e13893edeb9..3d2c108e911e 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -33,7 +33,6 @@
 #include <linux/spi/pxa2xx_spi.h>
 #include <linux/input/matrix_keypad.h>
 #include <linux/platform_data/i2c-pxa.h>
-#include <linux/usb/gpio_vbus.h>
 #include <linux/reboot.h>
 #include <linux/memblock.h>
 
@@ -240,18 +239,20 @@ static struct scoop_pcmcia_config tosa_pcmcia_config = {
 /*
  * USB Device Controller
  */
-static struct gpio_vbus_mach_info tosa_udc_info = {
-	.gpio_pullup		= TOSA_GPIO_USB_PULLUP,
-	.gpio_vbus		= TOSA_GPIO_USB_IN,
-	.gpio_vbus_inverted	= 1,
+static struct gpiod_lookup_table tosa_udc_gpiod_table = {
+	.dev_id = "gpio-vbus",
+	.table = {
+		GPIO_LOOKUP("gpio-pxa", TOSA_GPIO_USB_IN,
+			    "vbus", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("gpio-pxa", TOSA_GPIO_USB_PULLUP,
+			    "pullup", GPIO_ACTIVE_HIGH),
+		{ },
+	},
 };
 
 static struct platform_device tosa_gpio_vbus = {
 	.name	= "gpio-vbus",
 	.id	= -1,
-	.dev	= {
-		.platform_data	= &tosa_udc_info,
-	},
 };
 
 /*
@@ -949,6 +950,7 @@ static void __init tosa_init(void)
 
 	clk_add_alias("CLK_CK3P6MI", tc6393xb_device.name, "GPIO11_CLK", NULL);
 
+	gpiod_add_lookup_table(&tosa_udc_gpiod_table);
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
 
diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c
index 26a5ebc00069..14505e83479e 100644
--- a/arch/arm/mach-pxa/vpac270.c
+++ b/arch/arm/mach-pxa/vpac270.c
@@ -14,7 +14,6 @@
 #include <linux/leds.h>
 #include <linux/gpio.h>
 #include <linux/gpio/machine.h>
-#include <linux/usb/gpio_vbus.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
@@ -352,17 +351,18 @@ static inline void vpac270_uhc_init(void) {}
  * USB Gadget
  ******************************************************************************/
 #if defined(CONFIG_USB_PXA27X)||defined(CONFIG_USB_PXA27X_MODULE)
-static struct gpio_vbus_mach_info vpac270_gpio_vbus_info = {
-	.gpio_vbus		= GPIO41_VPAC270_UDC_DETECT,
-	.gpio_pullup		= -1,
+static struct gpiod_lookup_table vpac270_gpio_vbus_gpiod_table = {
+	.dev_id = "gpio-vbus",
+	.table = {
+		GPIO_LOOKUP("gpio-pxa", GPIO41_VPAC270_UDC_DETECT,
+			    "vbus", GPIO_ACTIVE_HIGH),
+		{ },
+	},
 };
 
 static struct platform_device vpac270_gpio_vbus = {
 	.name	= "gpio-vbus",
 	.id	= -1,
-	.dev	= {
-		.platform_data	= &vpac270_gpio_vbus_info,
-	},
 };
 
 static void vpac270_udc_command(int cmd)
@@ -381,6 +381,7 @@ static struct pxa2xx_udc_mach_info vpac270_udc_info __initdata = {
 static void __init vpac270_udc_init(void)
 {
 	pxa_set_udc_info(&vpac270_udc_info);
+	gpiod_add_lookup_table(&vpac270_gpio_vbus_gpiod_table);
 	platform_device_register(&vpac270_gpio_vbus);
 }
 #else
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index 686f0bbde998..c5c06d98b147 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -19,12 +19,12 @@ config PLAT_S3C24XX
 
 
 
-menu "SAMSUNG S3C24XX SoCs Support"
+menu "Samsung S3C24XX SoCs Support"
 
 comment "S3C24XX SoCs"
 
 config CPU_S3C2410
-	bool "SAMSUNG S3C2410"
+	bool "Samsung S3C2410"
 	default y
 	select CPU_ARM920T
 	select S3C2410_COMMON_CLK
@@ -35,7 +35,7 @@ config CPU_S3C2410
 	  of Samsung Mobile CPUs.
 
 config CPU_S3C2412
-	bool "SAMSUNG S3C2412"
+	bool "Samsung S3C2412"
 	select CPU_ARM926T
 	select S3C2412_COMMON_CLK
 	select S3C2412_PM if PM_SLEEP
@@ -43,7 +43,7 @@ config CPU_S3C2412
 	  Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
 
 config CPU_S3C2416
-	bool "SAMSUNG S3C2416/S3C2450"
+	bool "Samsung S3C2416/S3C2450"
 	select CPU_ARM926T
 	select S3C2416_PM if PM_SLEEP
 	select S3C2443_COMMON_CLK
@@ -51,7 +51,7 @@ config CPU_S3C2416
 	  Support for the S3C2416 SoC from the S3C24XX line
 
 config CPU_S3C2440
-	bool "SAMSUNG S3C2440"
+	bool "Samsung S3C2440"
 	select CPU_ARM920T
 	select S3C2410_COMMON_CLK
 	select S3C2410_PM if PM_SLEEP
@@ -59,7 +59,7 @@ config CPU_S3C2440
 	  Support for S3C2440 Samsung Mobile CPU based systems.
 
 config CPU_S3C2442
-	bool "SAMSUNG S3C2442"
+	bool "Samsung S3C2442"
 	select CPU_ARM920T
 	select S3C2410_COMMON_CLK
 	select S3C2410_PM if PM_SLEEP
@@ -71,7 +71,7 @@ config CPU_S3C244X
 	depends on CPU_S3C2440 || CPU_S3C2442
 
 config CPU_S3C2443
-	bool "SAMSUNG S3C2443"
+	bool "Samsung S3C2443"
 	select CPU_ARM920T
 	select S3C2443_COMMON_CLK
 	help
@@ -591,6 +591,6 @@ config PM_H1940
 	help
 	  Internal node for H1940 and related PM
 
-endmenu	# SAMSUNG S3C24XX SoCs Support
+endmenu	# Samsung S3C24XX SoCs Support
 
 endif	# ARCH_S3C24XX
diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c
index 29f9b345a531..03d8f27cdc32 100644
--- a/arch/arm/mach-s3c24xx/mach-rx1950.c
+++ b/arch/arm/mach-s3c24xx/mach-rx1950.c
@@ -377,6 +377,7 @@ static struct pwm_lookup rx1950_pwm_lookup[] = {
 };
 
 static struct pwm_device *lcd_pwm;
+static struct pwm_state lcd_pwm_state;
 
 static void rx1950_lcd_power(int enable)
 {
@@ -429,15 +430,16 @@ static void rx1950_lcd_power(int enable)
 
 		/* GPB1->OUTPUT, GPB1->0 */
 		gpio_direction_output(S3C2410_GPB(1), 0);
-		pwm_config(lcd_pwm, 0, LCD_PWM_PERIOD);
-		pwm_disable(lcd_pwm);
+
+		lcd_pwm_state.enabled = false;
+		pwm_apply_state(lcd_pwm, &lcd_pwm_state);
 
 		/* GPC0->0, GPC10->0 */
 		gpio_direction_output(S3C2410_GPC(0), 0);
 		gpio_direction_output(S3C2410_GPC(10), 0);
 	} else {
-		pwm_config(lcd_pwm, LCD_PWM_DUTY, LCD_PWM_PERIOD);
-		pwm_enable(lcd_pwm);
+		lcd_pwm_state.enabled = true;
+		pwm_apply_state(lcd_pwm, &lcd_pwm_state);
 
 		gpio_direction_output(S3C2410_GPC(0), 1);
 		gpio_direction_output(S3C2410_GPC(5), 1);
@@ -493,10 +495,13 @@ static int rx1950_backlight_init(struct device *dev)
 	}
 
 	/*
-	 * FIXME: pwm_apply_args() should be removed when switching to
-	 * the atomic PWM API.
+	 * This is only required to initialize .polarity; all other values are
+	 * fixed in this driver.
 	 */
-	pwm_apply_args(lcd_pwm);
+	pwm_init_state(lcd_pwm, &lcd_pwm_state);
+
+	lcd_pwm_state.period = LCD_PWM_PERIOD;
+	lcd_pwm_state.duty_cycle = LCD_PWM_DUTY;
 
 	rx1950_lcd_power(1);
 	rx1950_bl_power(1);
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index 5700822e3c74..ac3e3563487f 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -336,7 +336,6 @@ config MACH_WLF_CRAGG_6410
 
 config MACH_S3C64XX_DT
 	bool "Samsung S3C6400/S3C6410 machine using Device Tree"
-	select TIMER_OF
 	select CPU_S3C6400
 	select CPU_S3C6410
 	select PINCTRL
diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c
index 951208f168e7..829d5dbd69ee 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq.c
@@ -13,7 +13,6 @@
 #include <linux/serial_core.h>
 #include <linux/serial_s3c.h>
 #include <linux/spi/spi_gpio.h>
-#include <linux/usb/gpio_vbus.h>
 #include <linux/platform_data/s3c-hsotg.h>
 
 #include <asm/mach-types.h>
@@ -124,15 +123,16 @@ static struct s3c2410_hcd_info smartq_usb_host_info = {
 	.enable_oc	= smartq_usb_host_enableoc,
 };
 
-static struct gpio_vbus_mach_info smartq_usb_otg_vbus_pdata = {
-	.gpio_vbus		= S3C64XX_GPL(9),
-	.gpio_pullup		= -1,
-	.gpio_vbus_inverted	= true,
+static struct gpiod_lookup_table smartq_usb_otg_vbus_gpiod_table = {
+	.dev_id = "gpio-vbus",
+	.table = {
+		GPIO_LOOKUP("GPL", 9, "vbus", GPIO_ACTIVE_LOW),
+		{ },
+	},
 };
 
 static struct platform_device smartq_usb_otg_vbus_dev = {
 	.name			= "gpio-vbus",
-	.dev.platform_data	= &smartq_usb_otg_vbus_pdata,
 };
 
 static struct pwm_lookup smartq_pwm_lookup[] = {
@@ -418,6 +418,7 @@ void __init smartq_machine_init(void)
 
 	pwm_add_table(smartq_pwm_lookup, ARRAY_SIZE(smartq_pwm_lookup));
 	gpiod_add_lookup_table(&smartq_lcd_control_gpiod_table);
+	gpiod_add_lookup_table(&smartq_usb_otg_vbus_gpiod_table);
 	platform_add_devices(smartq_devices, ARRAY_SIZE(smartq_devices));
 
 	gpiod_add_lookup_table(&smartq_audio_gpios);
diff --git a/arch/arm/mach-tegra/sleep-tegra30.S b/arch/arm/mach-tegra/sleep-tegra30.S
index 3341a12bbb9c..02cc6ff96f30 100644
--- a/arch/arm/mach-tegra/sleep-tegra30.S
+++ b/arch/arm/mach-tegra/sleep-tegra30.S
@@ -59,6 +59,9 @@
 #define CLK_RESET_PLLX_MISC3_IDDQ	3
 #define CLK_RESET_PLLM_MISC_IDDQ	5
 #define CLK_RESET_PLLC_MISC_IDDQ	26
+#define CLK_RESET_PLLP_RESHIFT		0x528
+#define CLK_RESET_PLLP_RESHIFT_DEFAULT	0x3b
+#define CLK_RESET_PLLP_RESHIFT_ENABLE	0x3
 
 #define CLK_RESET_CLK_SOURCE_MSELECT	0x3b4
 
@@ -370,6 +373,18 @@ _pll_m_c_x_done:
 	pll_locked r1, r0, CLK_RESET_PLLC_BASE
 	pll_locked r1, r0, CLK_RESET_PLLX_BASE
 
+	tegra_get_soc_id TEGRA_APB_MISC_BASE, r1
+	cmp	r1, #TEGRA30
+	beq	1f
+
+	ldr	r1, [r0, #CLK_RESET_PLLP_BASE]
+	bic	r1, r1, #(1<<31)	@ disable PllP bypass
+	str	r1, [r0, #CLK_RESET_PLLP_BASE]
+
+	mov	r1, #CLK_RESET_PLLP_RESHIFT_DEFAULT
+	str	r1, [r0, #CLK_RESET_PLLP_RESHIFT]
+1:
+
 	mov32	r7, TEGRA_TMRUS_BASE
 	ldr	r1, [r7]
 	add	r1, r1, #LOCK_DELAY
@@ -630,9 +645,16 @@ tegra30_switch_cpu_to_clk32k:
 	str	r0, [r4, #PMC_PLLP_WB0_OVERRIDE]
 
 	/* disable PLLP, PLLA, PLLC and PLLX */
+	tegra_get_soc_id TEGRA_APB_MISC_BASE, r1
+	cmp	r1, #TEGRA30
 	ldr	r0, [r5, #CLK_RESET_PLLP_BASE]
+	orrne	r0, r0, #(1 << 31)	@ enable PllP bypass on fast cluster
 	bic	r0, r0, #(1 << 30)
 	str	r0, [r5, #CLK_RESET_PLLP_BASE]
+	beq	1f
+	mov	r0, #CLK_RESET_PLLP_RESHIFT_ENABLE
+	str	r0, [r5, #CLK_RESET_PLLP_RESHIFT]
+1:
 	ldr	r0, [r5, #CLK_RESET_PLLA_BASE]
 	bic	r0, r0, #(1 << 30)
 	str	r0, [r5, #CLK_RESET_PLLA_BASE]
@@ -648,8 +670,12 @@ tegra30_switch_cpu_to_clk32k:
 	pll_iddq_entry r1, r5, CLK_RESET_PLLX_MISC3, CLK_RESET_PLLX_MISC3_IDDQ
 _no_pll_in_iddq:
 
-	/* switch to CLKS */
-	mov	r0, #0	/* brust policy = 32KHz */
+	/*
+	 * Switch to clk_s (32KHz); bits 28:31=0
+	 * Enable burst on CPU IRQ; bit 24=1
+	 * Set IRQ burst clock source to clk_m; bits 10:8=0
+	 */
+	mov	r0, #(1 << 24)
 	str	r0, [r5, #CLK_RESET_SCLK_BURST]
 
 	ret	lr
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index a79fa3b0c8ed..a1694d977ec9 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -201,7 +201,7 @@ static unsigned long pin_highz_conf[] = {
 };
 
 /* Pin control settings */
-static struct pinctrl_map __initdata u300_pinmux_map[] = {
+static const struct pinctrl_map u300_pinmux_map[] = {
 	/* anonymous maps for chip power and EMIFs */
 	PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-u300", NULL, "power"),
 	PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-u300", NULL, "emif0"),
diff --git a/arch/arm/mach-zynq/platsmp.c b/arch/arm/mach-zynq/platsmp.c
index a10085be9073..68ec303fa278 100644
--- a/arch/arm/mach-zynq/platsmp.c
+++ b/arch/arm/mach-zynq/platsmp.c
@@ -15,6 +15,7 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <asm/cacheflush.h>
+#include <asm/smp_plat.h>
 #include <asm/smp_scu.h>
 #include <linux/irqchip/arm-gic.h>
 #include "common.h"
@@ -30,6 +31,7 @@ int zynq_cpun_start(u32 address, int cpu)
 {
 	u32 trampoline_code_size = &zynq_secondary_trampoline_end -
 						&zynq_secondary_trampoline;
+	u32 phy_cpuid = cpu_logical_map(cpu);
 
 	/* MS: Expectation that SLCR are directly map and accessible */
 	/* Not possible to jump to non aligned address */
@@ -39,7 +41,7 @@ int zynq_cpun_start(u32 address, int cpu)
 		u32 trampoline_size = &zynq_secondary_trampoline_jump -
 						&zynq_secondary_trampoline;
 
-		zynq_slcr_cpu_stop(cpu);
+		zynq_slcr_cpu_stop(phy_cpuid);
 		if (address) {
 			if (__pa(PAGE_OFFSET)) {
 				zero = ioremap(0, trampoline_code_size);
@@ -68,7 +70,7 @@ int zynq_cpun_start(u32 address, int cpu)
 			if (__pa(PAGE_OFFSET))
 				iounmap(zero);
 		}
-		zynq_slcr_cpu_start(cpu);
+		zynq_slcr_cpu_start(phy_cpuid);
 
 		return 0;
 	}
diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c
index 788c5cf46de5..84718eddae60 100644
--- a/arch/arm/mm/alignment.c
+++ b/arch/arm/mm/alignment.c
@@ -162,12 +162,12 @@ static ssize_t alignment_proc_write(struct file *file, const char __user *buffer
 	return count;
 }
 
-static const struct file_operations alignment_proc_fops = {
-	.open		= alignment_proc_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-	.write		= alignment_proc_write,
+static const struct proc_ops alignment_proc_ops = {
+	.proc_open	= alignment_proc_open,
+	.proc_read	= seq_read,
+	.proc_lseek	= seq_lseek,
+	.proc_release	= single_release,
+	.proc_write	= alignment_proc_write,
 };
 #endif /* CONFIG_PROC_FS */
 
@@ -1016,7 +1016,7 @@ static int __init alignment_init(void)
 	struct proc_dir_entry *res;
 
 	res = proc_create("cpu/alignment", S_IWUSR | S_IRUGO, NULL,
-			  &alignment_proc_fops);
+			  &alignment_proc_ops);
 	if (!res)
 		return -ENOMEM;
 #endif
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index e822af0d9219..9414d72f664b 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -221,7 +221,7 @@ EXPORT_SYMBOL(arm_coherent_dma_ops);
 
 static int __dma_supported(struct device *dev, u64 mask, bool warn)
 {
-	unsigned long max_dma_pfn = min(max_pfn, arm_dma_pfn_limit);
+	unsigned long max_dma_pfn = min(max_pfn - 1, arm_dma_pfn_limit);
 
 	/*
 	 * Translate the device's DMA mask to a PFN limit.  This
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 3ef204137e73..054be44d1cdb 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -324,7 +324,7 @@ static inline void poison_init_mem(void *s, size_t count)
 		*p++ = 0xe7fddef0;
 }
 
-static inline void
+static inline void __init
 free_memmap(unsigned long start_pfn, unsigned long end_pfn)
 {
 	struct page *start_pg, *end_pg;
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 08c99413d02c..7d859994ff95 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -65,18 +65,9 @@ enum { DMA_CHAIN_STARTED, DMA_CHAIN_NOTSTARTED };
 static struct omap_system_dma_plat_info *p;
 static struct omap_dma_dev_attr *d;
 static void omap_clear_dma(int lch);
-static int omap_dma_set_prio_lch(int lch, unsigned char read_prio,
-				 unsigned char write_prio);
 static int enable_1510_mode;
 static u32 errata;
 
-static struct omap_dma_global_context_registers {
-	u32 dma_irqenable_l0;
-	u32 dma_irqenable_l1;
-	u32 dma_ocp_sysconfig;
-	u32 dma_gcr;
-} omap_dma_global_context;
-
 struct dma_link_info {
 	int *linked_dmach_q;
 	int no_of_lchs_linked;
@@ -90,42 +81,6 @@ struct dma_link_info {
 
 };
 
-static struct dma_link_info *dma_linked_lch;
-
-#ifndef CONFIG_ARCH_OMAP1
-
-/* Chain handling macros */
-#define OMAP_DMA_CHAIN_QINIT(chain_id)					\
-	do {								\
-		dma_linked_lch[chain_id].q_head =			\
-		dma_linked_lch[chain_id].q_tail =			\
-		dma_linked_lch[chain_id].q_count = 0;			\
-	} while (0)
-#define OMAP_DMA_CHAIN_QFULL(chain_id)					\
-		(dma_linked_lch[chain_id].no_of_lchs_linked ==		\
-		dma_linked_lch[chain_id].q_count)
-#define OMAP_DMA_CHAIN_QLAST(chain_id)					\
-	do {								\
-		((dma_linked_lch[chain_id].no_of_lchs_linked-1) ==	\
-		dma_linked_lch[chain_id].q_count)			\
-	} while (0)
-#define OMAP_DMA_CHAIN_QEMPTY(chain_id)					\
-		(0 == dma_linked_lch[chain_id].q_count)
-#define __OMAP_DMA_CHAIN_INCQ(end)					\
-	((end) = ((end)+1) % dma_linked_lch[chain_id].no_of_lchs_linked)
-#define OMAP_DMA_CHAIN_INCQHEAD(chain_id)				\
-	do {								\
-		__OMAP_DMA_CHAIN_INCQ(dma_linked_lch[chain_id].q_head);	\
-		dma_linked_lch[chain_id].q_count--;			\
-	} while (0)
-
-#define OMAP_DMA_CHAIN_INCQTAIL(chain_id)				\
-	do {								\
-		__OMAP_DMA_CHAIN_INCQ(dma_linked_lch[chain_id].q_tail);	\
-		dma_linked_lch[chain_id].q_count++; \
-	} while (0)
-#endif
-
 static int dma_lch_count;
 static int dma_chan_count;
 static int omap_dma_reserve_channels;
@@ -137,9 +92,6 @@ static inline void disable_lnk(int lch);
 static void omap_disable_channel_irq(int lch);
 static inline void omap_enable_channel_irq(int lch);
 
-#define REVISIT_24XX()		printk(KERN_ERR "FIXME: no %s on 24xx\n", \
-						__func__);
-
 #ifdef CONFIG_ARCH_OMAP15XX
 /* Returns 1 if the DMA module is in OMAP1510-compatible mode, 0 otherwise */
 static int omap_dma_in_1510_mode(void)
@@ -278,19 +230,6 @@ void omap_set_dma_transfer_params(int lch, int data_type, int elem_count,
 }
 EXPORT_SYMBOL(omap_set_dma_transfer_params);
 
-void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode)
-{
-	if (dma_omap2plus()) {
-		u32 csdp;
-
-		csdp = p->dma_read(CSDP, lch);
-		csdp &= ~(0x3 << 16);
-		csdp |= (mode << 16);
-		p->dma_write(csdp, CSDP, lch);
-	}
-}
-EXPORT_SYMBOL(omap_set_dma_write_mode);
-
 void omap_set_dma_channel_mode(int lch, enum omap_dma_channel_mode mode)
 {
 	if (dma_omap1() && !dma_omap15xx()) {
@@ -332,25 +271,6 @@ void omap_set_dma_src_params(int lch, int src_port, int src_amode,
 }
 EXPORT_SYMBOL(omap_set_dma_src_params);
 
-void omap_set_dma_params(int lch, struct omap_dma_channel_params *params)
-{
-	omap_set_dma_transfer_params(lch, params->data_type,
-				     params->elem_count, params->frame_count,
-				     params->sync_mode, params->trigger,
-				     params->src_or_dst_synch);
-	omap_set_dma_src_params(lch, params->src_port,
-				params->src_amode, params->src_start,
-				params->src_ei, params->src_fi);
-
-	omap_set_dma_dest_params(lch, params->dst_port,
-				 params->dst_amode, params->dst_start,
-				 params->dst_ei, params->dst_fi);
-	if (params->read_prio || params->write_prio)
-		omap_dma_set_prio_lch(lch, params->read_prio,
-				      params->write_prio);
-}
-EXPORT_SYMBOL(omap_set_dma_params);
-
 void omap_set_dma_src_data_pack(int lch, int enable)
 {
 	u32 l;
@@ -507,12 +427,6 @@ static inline void omap_disable_channel_irq(int lch)
 		p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch);
 }
 
-void omap_enable_dma_irq(int lch, u16 bits)
-{
-	dma_chan[lch].enabled_irqs |= bits;
-}
-EXPORT_SYMBOL(omap_enable_dma_irq);
-
 void omap_disable_dma_irq(int lch, u16 bits)
 {
 	dma_chan[lch].enabled_irqs &= ~bits;
@@ -532,12 +446,6 @@ static inline void enable_lnk(int lch)
 	if (dma_chan[lch].next_lch != -1)
 		l = dma_chan[lch].next_lch | (1 << 15);
 
-#ifndef CONFIG_ARCH_OMAP1
-	if (dma_omap2plus())
-		if (dma_chan[lch].next_linked_ch != -1)
-			l = dma_chan[lch].next_linked_ch | (1 << 15);
-#endif
-
 	p->dma_write(l, CLNK_CTRL, lch);
 }
 
@@ -564,42 +472,6 @@ static inline void disable_lnk(int lch)
 	dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE;
 }
 
-static inline void omap2_enable_irq_lch(int lch)
-{
-	u32 val;
-	unsigned long flags;
-
-	if (dma_omap1())
-		return;
-
-	spin_lock_irqsave(&dma_chan_lock, flags);
-	/* clear IRQ STATUS */
-	p->dma_write(1 << lch, IRQSTATUS_L0, lch);
-	/* Enable interrupt */
-	val = p->dma_read(IRQENABLE_L0, lch);
-	val |= 1 << lch;
-	p->dma_write(val, IRQENABLE_L0, lch);
-	spin_unlock_irqrestore(&dma_chan_lock, flags);
-}
-
-static inline void omap2_disable_irq_lch(int lch)
-{
-	u32 val;
-	unsigned long flags;
-
-	if (dma_omap1())
-		return;
-
-	spin_lock_irqsave(&dma_chan_lock, flags);
-	/* Disable interrupt */
-	val = p->dma_read(IRQENABLE_L0, lch);
-	val &= ~(1 << lch);
-	p->dma_write(val, IRQENABLE_L0, lch);
-	/* clear IRQ STATUS */
-	p->dma_write(1 << lch, IRQSTATUS_L0, lch);
-	spin_unlock_irqrestore(&dma_chan_lock, flags);
-}
-
 int omap_request_dma(int dev_id, const char *dev_name,
 		     void (*callback)(int lch, u16 ch_status, void *data),
 		     void *data, int *dma_ch_out)
@@ -628,9 +500,6 @@ int omap_request_dma(int dev_id, const char *dev_name,
 	if (p->clear_lch_regs)
 		p->clear_lch_regs(free_ch);
 
-	if (dma_omap2plus())
-		omap_clear_dma(free_ch);
-
 	spin_unlock_irqrestore(&dma_chan_lock, flags);
 
 	chan->dev_name = dev_name;
@@ -638,20 +507,10 @@ int omap_request_dma(int dev_id, const char *dev_name,
 	chan->data = data;
 	chan->flags = 0;
 
-#ifndef CONFIG_ARCH_OMAP1
-	if (dma_omap2plus()) {
-		chan->chain_id = -1;
-		chan->next_linked_ch = -1;
-	}
-#endif
-
 	chan->enabled_irqs = OMAP_DMA_DROP_IRQ | OMAP_DMA_BLOCK_IRQ;
 
 	if (dma_omap1())
 		chan->enabled_irqs |= OMAP1_DMA_TOUT_IRQ;
-	else if (dma_omap2plus())
-		chan->enabled_irqs |= OMAP2_DMA_MISALIGNED_ERR_IRQ |
-			OMAP2_DMA_TRANS_ERR_IRQ;
 
 	if (dma_omap16xx()) {
 		/* If the sync device is set, configure it dynamically. */
@@ -668,11 +527,6 @@ int omap_request_dma(int dev_id, const char *dev_name,
 		p->dma_write(dev_id, CCR, free_ch);
 	}
 
-	if (dma_omap2plus()) {
-		omap_enable_channel_irq(free_ch);
-		omap2_enable_irq_lch(free_ch);
-	}
-
 	*dma_ch_out = free_ch;
 
 	return 0;
@@ -689,20 +543,12 @@ void omap_free_dma(int lch)
 		return;
 	}
 
-	/* Disable interrupt for logical channel */
-	if (dma_omap2plus())
-		omap2_disable_irq_lch(lch);
-
 	/* Disable all DMA interrupts for the channel. */
 	omap_disable_channel_irq(lch);
 
 	/* Make sure the DMA transfer is stopped. */
 	p->dma_write(0, CCR, lch);
 
-	/* Clear registers */
-	if (dma_omap2plus())
-		omap_clear_dma(lch);
-
 	spin_lock_irqsave(&dma_chan_lock, flags);
 	dma_chan[lch].dev_id = -1;
 	dma_chan[lch].next_lch = -1;
@@ -711,71 +557,6 @@ void omap_free_dma(int lch)
 }
 EXPORT_SYMBOL(omap_free_dma);
 
-/**
- * @brief omap_dma_set_global_params : Set global priority settings for dma
- *
- * @param arb_rate
- * @param max_fifo_depth
- * @param tparams - Number of threads to reserve : DMA_THREAD_RESERVE_NORM
- * 						   DMA_THREAD_RESERVE_ONET
- * 						   DMA_THREAD_RESERVE_TWOT
- * 						   DMA_THREAD_RESERVE_THREET
- */
-void
-omap_dma_set_global_params(int arb_rate, int max_fifo_depth, int tparams)
-{
-	u32 reg;
-
-	if (dma_omap1()) {
-		printk(KERN_ERR "FIXME: no %s on 15xx/16xx\n", __func__);
-		return;
-	}
-
-	if (max_fifo_depth == 0)
-		max_fifo_depth = 1;
-	if (arb_rate == 0)
-		arb_rate = 1;
-
-	reg = 0xff & max_fifo_depth;
-	reg |= (0x3 & tparams) << 12;
-	reg |= (arb_rate & 0xff) << 16;
-
-	p->dma_write(reg, GCR, 0);
-}
-EXPORT_SYMBOL(omap_dma_set_global_params);
-
-/**
- * @brief omap_dma_set_prio_lch : Set channel wise priority settings
- *
- * @param lch
- * @param read_prio - Read priority
- * @param write_prio - Write priority
- * Both of the above can be set with one of the following values :
- * 	DMA_CH_PRIO_HIGH/DMA_CH_PRIO_LOW
- */
-static int
-omap_dma_set_prio_lch(int lch, unsigned char read_prio,
-		      unsigned char write_prio)
-{
-	u32 l;
-
-	if (unlikely((lch < 0 || lch >= dma_lch_count))) {
-		printk(KERN_ERR "Invalid channel id\n");
-		return -EINVAL;
-	}
-	l = p->dma_read(CCR, lch);
-	l &= ~((1 << 6) | (1 << 26));
-	if (d->dev_caps & IS_RW_PRIORITY)
-		l |= ((read_prio & 0x1) << 6) | ((write_prio & 0x1) << 26);
-	else
-		l |= ((read_prio & 0x1) << 6);
-
-	p->dma_write(l, CCR, lch);
-
-	return 0;
-}
-
-
 /*
  * Clears any DMA state so the DMA engine is ready to restart with new buffers
  * through omap_start_dma(). Any buffers in flight are discarded.
@@ -926,29 +707,6 @@ EXPORT_SYMBOL(omap_stop_dma);
  * Allows changing the DMA callback function or data. This may be needed if
  * the driver shares a single DMA channel for multiple dma triggers.
  */
-int omap_set_dma_callback(int lch,
-			  void (*callback)(int lch, u16 ch_status, void *data),
-			  void *data)
-{
-	unsigned long flags;
-
-	if (lch < 0)
-		return -ENODEV;
-
-	spin_lock_irqsave(&dma_chan_lock, flags);
-	if (dma_chan[lch].dev_id == -1) {
-		printk(KERN_ERR "DMA callback for not set for free channel\n");
-		spin_unlock_irqrestore(&dma_chan_lock, flags);
-		return -EINVAL;
-	}
-	dma_chan[lch].callback = callback;
-	dma_chan[lch].data = data;
-	spin_unlock_irqrestore(&dma_chan_lock, flags);
-
-	return 0;
-}
-EXPORT_SYMBOL(omap_set_dma_callback);
-
 /*
  * Returns current physical source address for the given DMA channel.
  * If the channel is running the caller must disable interrupts prior calling
@@ -1048,34 +806,6 @@ int omap_dma_running(void)
 	return 0;
 }
 
-/*
- * lch_queue DMA will start right after lch_head one is finished.
- * For this DMA link to start, you still need to start (see omap_start_dma)
- * the first one. That will fire up the entire queue.
- */
-void omap_dma_link_lch(int lch_head, int lch_queue)
-{
-	if (omap_dma_in_1510_mode()) {
-		if (lch_head == lch_queue) {
-			p->dma_write(p->dma_read(CCR, lch_head) | (3 << 8),
-								CCR, lch_head);
-			return;
-		}
-		printk(KERN_ERR "DMA linking is not supported in 1510 mode\n");
-		BUG();
-		return;
-	}
-
-	if ((dma_chan[lch_head].dev_id == -1) ||
-	    (dma_chan[lch_queue].dev_id == -1)) {
-		pr_err("omap_dma: trying to link non requested channels\n");
-		dump_stack();
-	}
-
-	dma_chan[lch_head].next_lch = lch_queue;
-}
-EXPORT_SYMBOL(omap_dma_link_lch);
-
 /*----------------------------------------------------------------------------*/
 
 #ifdef CONFIG_ARCH_OMAP1
@@ -1136,145 +866,6 @@ static irqreturn_t omap1_dma_irq_handler(int irq, void *dev_id)
 #define omap1_dma_irq_handler	NULL
 #endif
 
-#ifdef CONFIG_ARCH_OMAP2PLUS
-
-static int omap2_dma_handle_ch(int ch)
-{
-	u32 status = p->dma_read(CSR, ch);
-
-	if (!status) {
-		if (printk_ratelimit())
-			pr_warn("Spurious DMA IRQ for lch %d\n", ch);
-		p->dma_write(1 << ch, IRQSTATUS_L0, ch);
-		return 0;
-	}
-	if (unlikely(dma_chan[ch].dev_id == -1)) {
-		if (printk_ratelimit())
-			pr_warn("IRQ %04x for non-allocated DMA channel %d\n",
-				status, ch);
-		return 0;
-	}
-	if (unlikely(status & OMAP_DMA_DROP_IRQ))
-		pr_info("DMA synchronization event drop occurred with device %d\n",
-			dma_chan[ch].dev_id);
-	if (unlikely(status & OMAP2_DMA_TRANS_ERR_IRQ)) {
-		printk(KERN_INFO "DMA transaction error with device %d\n",
-		       dma_chan[ch].dev_id);
-		if (IS_DMA_ERRATA(DMA_ERRATA_i378)) {
-			u32 ccr;
-
-			ccr = p->dma_read(CCR, ch);
-			ccr &= ~OMAP_DMA_CCR_EN;
-			p->dma_write(ccr, CCR, ch);
-			dma_chan[ch].flags &= ~OMAP_DMA_ACTIVE;
-		}
-	}
-	if (unlikely(status & OMAP2_DMA_SECURE_ERR_IRQ))
-		printk(KERN_INFO "DMA secure error with device %d\n",
-		       dma_chan[ch].dev_id);
-	if (unlikely(status & OMAP2_DMA_MISALIGNED_ERR_IRQ))
-		printk(KERN_INFO "DMA misaligned error with device %d\n",
-		       dma_chan[ch].dev_id);
-
-	p->dma_write(status, CSR, ch);
-	p->dma_write(1 << ch, IRQSTATUS_L0, ch);
-	/* read back the register to flush the write */
-	p->dma_read(IRQSTATUS_L0, ch);
-
-	/* If the ch is not chained then chain_id will be -1 */
-	if (dma_chan[ch].chain_id != -1) {
-		int chain_id = dma_chan[ch].chain_id;
-		dma_chan[ch].state = DMA_CH_NOTSTARTED;
-		if (p->dma_read(CLNK_CTRL, ch) & (1 << 15))
-			dma_chan[dma_chan[ch].next_linked_ch].state =
-							DMA_CH_STARTED;
-		if (dma_linked_lch[chain_id].chain_mode ==
-						OMAP_DMA_DYNAMIC_CHAIN)
-			disable_lnk(ch);
-
-		if (!OMAP_DMA_CHAIN_QEMPTY(chain_id))
-			OMAP_DMA_CHAIN_INCQHEAD(chain_id);
-
-		status = p->dma_read(CSR, ch);
-		p->dma_write(status, CSR, ch);
-	}
-
-	if (likely(dma_chan[ch].callback != NULL))
-		dma_chan[ch].callback(ch, status, dma_chan[ch].data);
-
-	return 0;
-}
-
-/* STATUS register count is from 1-32 while our is 0-31 */
-static irqreturn_t omap2_dma_irq_handler(int irq, void *dev_id)
-{
-	u32 val, enable_reg;
-	int i;
-
-	val = p->dma_read(IRQSTATUS_L0, 0);
-	if (val == 0) {
-		if (printk_ratelimit())
-			printk(KERN_WARNING "Spurious DMA IRQ\n");
-		return IRQ_HANDLED;
-	}
-	enable_reg = p->dma_read(IRQENABLE_L0, 0);
-	val &= enable_reg; /* Dispatch only relevant interrupts */
-	for (i = 0; i < dma_lch_count && val != 0; i++) {
-		if (val & 1)
-			omap2_dma_handle_ch(i);
-		val >>= 1;
-	}
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction omap24xx_dma_irq = {
-	.name = "DMA",
-	.handler = omap2_dma_irq_handler,
-};
-
-#else
-static struct irqaction omap24xx_dma_irq;
-#endif
-
-/*----------------------------------------------------------------------------*/
-
-/*
- * Note that we are currently using only IRQENABLE_L0 and L1.
- * As the DSP may be using IRQENABLE_L2 and L3, let's not
- * touch those for now.
- */
-void omap_dma_global_context_save(void)
-{
-	omap_dma_global_context.dma_irqenable_l0 =
-		p->dma_read(IRQENABLE_L0, 0);
-	omap_dma_global_context.dma_irqenable_l1 =
-		p->dma_read(IRQENABLE_L1, 0);
-	omap_dma_global_context.dma_ocp_sysconfig =
-		p->dma_read(OCP_SYSCONFIG, 0);
-	omap_dma_global_context.dma_gcr = p->dma_read(GCR, 0);
-}
-
-void omap_dma_global_context_restore(void)
-{
-	int ch;
-
-	p->dma_write(omap_dma_global_context.dma_gcr, GCR, 0);
-	p->dma_write(omap_dma_global_context.dma_ocp_sysconfig,
-		OCP_SYSCONFIG, 0);
-	p->dma_write(omap_dma_global_context.dma_irqenable_l0,
-		IRQENABLE_L0, 0);
-	p->dma_write(omap_dma_global_context.dma_irqenable_l1,
-		IRQENABLE_L1, 0);
-
-	if (IS_DMA_ERRATA(DMA_ROMCODE_BUG))
-		p->dma_write(0x3 , IRQSTATUS_L0, 0);
-
-	for (ch = 0; ch < dma_chan_count; ch++)
-		if (dma_chan[ch].dev_id != -1)
-			omap_clear_dma(ch);
-}
-
 struct omap_system_dma_plat_info *omap_get_plat_info(void)
 {
 	return p;
@@ -1286,7 +877,6 @@ static int omap_system_dma_probe(struct platform_device *pdev)
 	int ch, ret = 0;
 	int dma_irq;
 	char irq_name[4];
-	int irq_rel;
 
 	p = pdev->dev.platform_data;
 	if (!p) {
@@ -1312,21 +902,9 @@ static int omap_system_dma_probe(struct platform_device *pdev)
 	if (!dma_chan)
 		return -ENOMEM;
 
-	if (dma_omap2plus()) {
-		dma_linked_lch = kcalloc(dma_lch_count,
-					 sizeof(*dma_linked_lch),
-					 GFP_KERNEL);
-		if (!dma_linked_lch) {
-			ret = -ENOMEM;
-			goto exit_dma_lch_fail;
-		}
-	}
-
 	spin_lock_init(&dma_chan_lock);
 	for (ch = 0; ch < dma_chan_count; ch++) {
 		omap_clear_dma(ch);
-		if (dma_omap2plus())
-			omap2_disable_irq_lch(ch);
 
 		dma_chan[ch].dev_id = -1;
 		dma_chan[ch].next_lch = -1;
@@ -1359,26 +937,6 @@ static int omap_system_dma_probe(struct platform_device *pdev)
 		}
 	}
 
-	if (d->dev_caps & IS_RW_PRIORITY)
-		omap_dma_set_global_params(DMA_DEFAULT_ARB_RATE,
-				DMA_DEFAULT_FIFO_DEPTH, 0);
-
-	if (dma_omap2plus() && !(d->dev_caps & DMA_ENGINE_HANDLE_IRQ)) {
-		strcpy(irq_name, "0");
-		dma_irq = platform_get_irq_byname(pdev, irq_name);
-		if (dma_irq < 0) {
-			dev_err(&pdev->dev, "failed: request IRQ %d", dma_irq);
-			ret = dma_irq;
-			goto exit_dma_lch_fail;
-		}
-		ret = setup_irq(dma_irq, &omap24xx_dma_irq);
-		if (ret) {
-			dev_err(&pdev->dev, "set_up failed for IRQ %d for DMA (error %d)\n",
-				dma_irq, ret);
-			goto exit_dma_lch_fail;
-		}
-	}
-
 	/* reserve dma channels 0 and 1 in high security devices on 34xx */
 	if (d->dev_caps & HS_CHANNELS_RESERVED) {
 		pr_info("Reserving DMA channels 0 and 1 for HS ROM code\n");
@@ -1389,34 +947,21 @@ static int omap_system_dma_probe(struct platform_device *pdev)
 	return 0;
 
 exit_dma_irq_fail:
-	dev_err(&pdev->dev, "unable to request IRQ %d for DMA (error %d)\n",
-		dma_irq, ret);
-	for (irq_rel = 0; irq_rel < ch;	irq_rel++) {
-		dma_irq = platform_get_irq(pdev, irq_rel);
-		free_irq(dma_irq, (void *)(irq_rel + 1));
-	}
-
-exit_dma_lch_fail:
 	return ret;
 }
 
 static int omap_system_dma_remove(struct platform_device *pdev)
 {
-	int dma_irq;
+	int dma_irq, irq_rel = 0;
 
-	if (dma_omap2plus()) {
-		char irq_name[4];
-		strcpy(irq_name, "0");
-		dma_irq = platform_get_irq_byname(pdev, irq_name);
-		if (dma_irq >= 0)
-			remove_irq(dma_irq, &omap24xx_dma_irq);
-	} else {
-		int irq_rel = 0;
-		for ( ; irq_rel < dma_chan_count; irq_rel++) {
-			dma_irq = platform_get_irq(pdev, irq_rel);
-			free_irq(dma_irq, (void *)(irq_rel + 1));
-		}
+	if (dma_omap2plus())
+		return 0;
+
+	for ( ; irq_rel < dma_chan_count; irq_rel++) {
+		dma_irq = platform_get_irq(pdev, irq_rel);
+		free_irq(dma_irq, (void *)(irq_rel + 1));
 	}
+
 	return 0;
 }
 
diff --git a/arch/arm/plat-samsung/adc.c b/arch/arm/plat-samsung/adc.c
index ee3d5c989a76..4f7b27239bd4 100644
--- a/arch/arm/plat-samsung/adc.c
+++ b/arch/arm/plat-samsung/adc.c
@@ -40,7 +40,7 @@ enum s3c_cpu_type {
 	TYPE_ADCV11, /* S3C2443 */
 	TYPE_ADCV12, /* S3C2416, S3C2450 */
 	TYPE_ADCV2, /* S3C64XX */
-	TYPE_ADCV3, /* S5PV210, S5PC110, EXYNOS4210 */
+	TYPE_ADCV3, /* S5PV210, S5PC110, Exynos4210 */
 };
 
 struct s3c_adc_client {
diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c
index 1602f6dc900b..089a17687104 100644
--- a/arch/arm/plat-samsung/devs.c
+++ b/arch/arm/plat-samsung/devs.c
@@ -3,7 +3,7 @@
 // Copyright (c) 2011 Samsung Electronics Co., Ltd.
 //		http://www.samsung.com
 //
-// Base SAMSUNG platform device definitions
+// Base Samsung platform device definitions
 
 #include <linux/kernel.h>
 #include <linux/types.h>
diff --git a/arch/arm/plat-samsung/gpio-samsung.c b/arch/arm/plat-samsung/gpio-samsung.c
index f66c820cd82b..8955fd675265 100644
--- a/arch/arm/plat-samsung/gpio-samsung.c
+++ b/arch/arm/plat-samsung/gpio-samsung.c
@@ -8,7 +8,7 @@
 //      Ben Dooks <ben@simtec.co.uk>
 //      http://armlinux.simtec.co.uk/
 //
-// SAMSUNG - GPIOlib support
+// Samsung - GPIOlib support
 
 #include <linux/kernel.h>
 #include <linux/irq.h>
diff --git a/arch/arm/plat-samsung/include/plat/samsung-time.h b/arch/arm/plat-samsung/include/plat/samsung-time.h
index d16eefe9ae78..32ab0860f631 100644
--- a/arch/arm/plat-samsung/include/plat/samsung-time.h
+++ b/arch/arm/plat-samsung/include/plat/samsung-time.h
@@ -9,7 +9,7 @@
 #ifndef __ASM_PLAT_SAMSUNG_TIME_H
 #define __ASM_PLAT_SAMSUNG_TIME_H __FILE__
 
-/* SAMSUNG HR-Timer Clock mode */
+/* Samsung HR-Timer Clock mode */
 enum samsung_timer_mode {
 	SAMSUNG_PWM0,
 	SAMSUNG_PWM1,
diff --git a/arch/arm/tools/syscall.tbl b/arch/arm/tools/syscall.tbl
index 6da7dc4d79cc..4d1cf74a2caa 100644
--- a/arch/arm/tools/syscall.tbl
+++ b/arch/arm/tools/syscall.tbl
@@ -449,3 +449,5 @@
 433	common	fspick				sys_fspick
 434	common	pidfd_open			sys_pidfd_open
 435	common	clone3				sys_clone3
+437	common	openat2				sys_openat2
+438	common	pidfd_getfd			sys_pidfd_getfd
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index de238b59d9eb..0b30e884e088 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -104,6 +104,7 @@ config ARM64
 	select GENERIC_IRQ_SHOW
 	select GENERIC_IRQ_SHOW_LEVEL
 	select GENERIC_PCI_IOMAP
+	select GENERIC_PTDUMP
 	select GENERIC_SCHED_CLOCK
 	select GENERIC_SMP_IDLE_THREAD
 	select GENERIC_STRNCPY_FROM_USER
@@ -164,7 +165,7 @@ config ARM64
 	select HAVE_REGS_AND_STACK_ACCESS_API
 	select HAVE_FUNCTION_ARG_ACCESS_API
 	select HAVE_FUTEX_CMPXCHG if FUTEX
-	select HAVE_RCU_TABLE_FREE
+	select MMU_GATHER_RCU_TABLE_FREE
 	select HAVE_RSEQ
 	select HAVE_STACKPROTECTOR
 	select HAVE_SYSCALL_TRACEPOINTS
diff --git a/arch/arm64/Kconfig.debug b/arch/arm64/Kconfig.debug
index cf09010d825f..1c906d932d6b 100644
--- a/arch/arm64/Kconfig.debug
+++ b/arch/arm64/Kconfig.debug
@@ -1,22 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0-only
 
-config ARM64_PTDUMP_CORE
-	def_bool n
-
-config ARM64_PTDUMP_DEBUGFS
-	bool "Export kernel pagetable layout to userspace via debugfs"
-	depends on DEBUG_KERNEL
-	select ARM64_PTDUMP_CORE
-	select DEBUG_FS
-        help
-	  Say Y here if you want to show the kernel pagetable layout in a
-	  debugfs file. This information is only useful for kernel developers
-	  who are working in architecture specific areas of the kernel.
-	  It is probably not a good idea to enable this feature in a production
-	  kernel.
-
-	  If in doubt, say N.
-
 config PID_IN_CONTEXTIDR
 	bool "Write the current PID to the CONTEXTIDR register"
 	help
@@ -42,7 +25,7 @@ config ARM64_RANDOMIZE_TEXT_OFFSET
 
 config DEBUG_WX
 	bool "Warn on W+X mappings at boot"
-	select ARM64_PTDUMP_CORE
+	select PTDUMP_CORE
 	---help---
 	  Generate a warning if any W+X mappings are found at boot.
 
diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
index d2418021768b..cf4f78617c3f 100644
--- a/arch/arm64/boot/dts/allwinner/Makefile
+++ b/arch/arm64/boot/dts/allwinner/Makefile
@@ -15,6 +15,8 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-bananapi-m2-plus.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-bananapi-m2-plus-v1.2.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-emlid-neutis-n5-devboard.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-libretech-all-h3-cc.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-libretech-all-h3-it.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-libretech-all-h5-cc.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo2.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo-plus2.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-pc2.dtb
@@ -26,4 +28,5 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-3.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-lite2.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-one-plus.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64-model-b.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6.dtb
diff --git a/arch/arm64/boot/dts/allwinner/axp803.dtsi b/arch/arm64/boot/dts/allwinner/axp803.dtsi
index f0349ef4bfdd..10e9186a76bf 100644
--- a/arch/arm64/boot/dts/allwinner/axp803.dtsi
+++ b/arch/arm64/boot/dts/allwinner/axp803.dtsi
@@ -1,44 +1,5 @@
-/*
- * Copyright 2017 Icenowy Zheng <icenowy@aosc.xyz>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright 2017 Icenowy Zheng <icenowy@aosc.xyz>
 
 /*
  * AXP803 Integrated Power Management Chip
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts
index 5634245d11db..c7bd73f35ed8 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts
@@ -1,12 +1,11 @@
 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2018 Amarula Solutions B.V.
- * Author: Jagan Teki <jagan@amarulasolutions.com>
- */
+// Copyright (C) 2018 Amarula Solutions B.V.
+// Author: Jagan Teki <jagan@amarulasolutions.com>
 
 /dts-v1/;
 
 #include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 
@@ -65,6 +64,22 @@
 	};
 };
 
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
 &csi {
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
index 208373efee49..883f217efb81 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
@@ -1,48 +1,10 @@
-/*
- * Copyright (c) 2016 ARM Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2016 ARM Ltd.
 
 /dts-v1/;
 
 #include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 
@@ -108,6 +70,22 @@
 	status = "okay";
 };
 
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
 &dai {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-cpu-opp.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-cpu-opp.dtsi
new file mode 100644
index 000000000000..578c37490d90
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-cpu-opp.dtsi
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Vasily khoruzhick <anarsoul@gmail.com>
+ */
+
+/ {
+	cpu0_opp_table: opp_table0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-648000000 {
+			opp-hz = /bits/ 64 <648000000>;
+			opp-microvolt = <1040000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-816000000 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-912000000 {
+			opp-hz = /bits/ 64 <912000000>;
+			opp-microvolt = <1120000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-960000000 {
+			opp-hz = /bits/ 64 <960000000>;
+			opp-microvolt = <1160000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <1200000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1056000000 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-microvolt = <1240000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1104000000 {
+			opp-hz = /bits/ 64 <1104000000>;
+			opp-microvolt = <1260000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1152000000 {
+			opp-hz = /bits/ 64 <1152000000>;
+			opp-microvolt = <1300000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+	};
+};
+
+&cpu0 {
+	operating-points-v2 = <&cpu0_opp_table>;
+};
+
+&cpu1 {
+	operating-points-v2 = <&cpu0_opp_table>;
+};
+
+&cpu2 {
+	operating-points-v2 = <&cpu0_opp_table>;
+};
+
+&cpu3 {
+	operating-points-v2 = <&cpu0_opp_table>;
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
index 9b9d9157128c..e58db8a6cab6 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
@@ -1,48 +1,10 @@
-/*
- * Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
 
 /dts-v1/;
 
 #include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 
@@ -87,6 +49,22 @@
 	};
 };
 
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
 &de {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts
index 787ebd805a3b..577f9e1d08a1 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts
@@ -1,9 +1,7 @@
 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2019 Oceanic Systems (UK) Ltd.
- * Copyright (C) 2019 Amarula Solutions B.V.
- * Author: Jagan Teki <jagan@amarulasolutions.com>
- */
+// Copyright (C) 2019 Oceanic Systems (UK) Ltd.
+// Copyright (C) 2019 Amarula Solutions B.V.
+// Author: Jagan Teki <jagan@amarulasolutions.com>
 
 /dts-v1/;
 
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino-emmc.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino-emmc.dts
index 121e6cc4849b..efb20846de49 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino-emmc.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino-emmc.dts
@@ -1,8 +1,6 @@
 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2018 Martin Ayotte <martinayotte@gmail.com>
- * Copyright (C) 2019 Sunil Mohan Adapa <sunil@medhas.org>
- */
+// Copyright (C) 2018 Martin Ayotte <martinayotte@gmail.com>
+// Copyright (C) 2019 Sunil Mohan Adapa <sunil@medhas.org>
 
 #include "sun50i-a64-olinuxino.dts"
 
@@ -21,3 +19,7 @@
 	cap-mmc-hw-reset;
 	status = "okay";
 };
+
+&pio {
+	vcc-pc-supply = <&reg_eldo1>;
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
index 393c1948a495..6dfafa1c879b 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
@@ -1,48 +1,10 @@
-/*
- * Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
 
 /dts-v1/;
 
 #include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 
@@ -87,6 +49,22 @@
 	};
 };
 
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
 &de {
 	status = "okay";
 };
@@ -163,6 +141,23 @@
 	status = "okay";
 };
 
+&pio {
+	vcc-pc-supply = <&reg_dcdc1>;
+	vcc-pd-supply = <&reg_dcdc1>;
+	vcc-pe-supply = <&reg_aldo1>;
+	vcc-pg-supply = <&reg_dldo4>;
+};
+
+&r_pio {
+	/*
+	 * FIXME: We can't add that supply for now since it would
+	 * create a circular dependency between pinctrl, the regulator
+	 * and the RSB Bus.
+	 *
+	 * vcc-pl-supply = <&reg_aldo2>;
+	 */
+};
+
 &r_rsb {
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
index f54a415f2e3b..fde9c7a99b17 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
@@ -1,49 +1,11 @@
-/*
- * Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
- * Copyright (C) 2017-2018 Samuel Holland <samuel@sholland.org>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
+// Copyright (C) 2017-2018 Samuel Holland <samuel@sholland.org>
 
 /dts-v1/;
 
 #include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 
@@ -123,6 +85,22 @@
 	status = "okay";
 };
 
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
 &dai {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts
index 72d6961dc312..302e24be0a31 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts
@@ -1,8 +1,5 @@
-/*
- * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
- *
- * Copyright (c) 2018 ARM Ltd.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2018 ARM Ltd.
 
 #include "sun50i-a64-sopine-baseboard.dts"
 
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts
index d5b6e8159a33..b26181cf9095 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts
@@ -1,44 +1,5 @@
-/*
- * Copyright (c) 2016 ARM Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2016 ARM Ltd.
 
 #include "sun50i-a64-pine64.dts"
 
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
index 409523cb0950..2165f238af13 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
@@ -1,48 +1,10 @@
-/*
- * Copyright (c) 2016 ARM Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2016 ARM Ltd.
 
 /dts-v1/;
 
 #include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 
@@ -84,6 +46,22 @@
 	status = "okay";
 };
 
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
 &dai {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
index 78c82a665c84..3d894b208901 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
@@ -1,15 +1,14 @@
 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.xyz>
- * Copyright (C) 2018 Vasily Khoruzhick <anarsoul@gmail.com>
- *
- */
+// Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.xyz>
+// Copyright (C) 2018 Vasily Khoruzhick <anarsoul@gmail.com>
 
 /dts-v1/;
 
 #include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/pwm/pwm.h>
 
@@ -60,6 +59,7 @@
 			linux,code = <SW_LID>;
 			linux,can-disable;
 			wakeup-source;
+			wakeup-event-action = <EV_ACT_DEASSERTED>;
 		};
 	};
 
@@ -98,6 +98,22 @@
 	status = "okay";
 };
 
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
 &dai {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
index 920103ec0046..2f6ea9f3f6a2 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
@@ -1,47 +1,7 @@
-/*
- * Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.xyz>
- *
- * Based on sun50i-a64-pine64.dts, which is:
- *   Copyright (c) 2016 ARM Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.xyz>
+// Based on sun50i-a64-pine64.dts, which is:
+//   Copyright (c) 2016 ARM Ltd.
 
 /dts-v1/;
 
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
index 9d20e13f0c02..c48692b06e1f 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
@@ -1,49 +1,10 @@
-/*
- * Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.xyz>
- *
- * Based on sun50i-a64-pine64.dts, which is:
- *   Copyright (c) 2016 ARM Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.xyz>
+// Based on sun50i-a64-pine64.dts, which is:
+//   Copyright (c) 2016 ARM Ltd.
 
 #include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 
@@ -51,6 +12,22 @@
 	cpvdd-supply = <&reg_eldo1>;
 };
 
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
index 970415106dcf..f5df5f705b72 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
@@ -1,13 +1,11 @@
-/*
- * Copyright (C) Harald Geyer <harald@ccbib.org>
- * based on sun50i-a64-olinuxino.dts by Jagan Teki <jteki@openedev.com>
- *
- * SPDX-License-Identifier: (GPL-2.0 OR MIT)
- */
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+// Copyright (C) Harald Geyer <harald@ccbib.org>
+// based on sun50i-a64-olinuxino.dts by Jagan Teki <jteki@openedev.com>
 
 /dts-v1/;
 
 #include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
@@ -104,6 +102,22 @@
 	status = "okay";
 };
 
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
 &ehci1 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index 27e48234f1c2..862b47dc9dc9 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -1,46 +1,7 @@
-/*
- * Copyright (C) 2016 ARM Ltd.
- * based on the Allwinner H3 dtsi:
- *    Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2016 ARM Ltd.
+// based on the Allwinner H3 dtsi:
+//    Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
 
 #include <dt-bindings/clock/sun50i-a64-ccu.h>
 #include <dt-bindings/clock/sun8i-de2.h>
@@ -49,6 +10,7 @@
 #include <dt-bindings/reset/sun50i-a64-ccu.h>
 #include <dt-bindings/reset/sun8i-de2.h>
 #include <dt-bindings/reset/sun8i-r-ccu.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	interrupt-parent = <&gic>;
@@ -89,6 +51,9 @@
 			reg = <0>;
 			enable-method = "psci";
 			next-level-cache = <&L2>;
+			clocks = <&ccu 21>;
+			clock-names = "cpu";
+			#cooling-cells = <2>;
 		};
 
 		cpu1: cpu@1 {
@@ -97,6 +62,9 @@
 			reg = <1>;
 			enable-method = "psci";
 			next-level-cache = <&L2>;
+			clocks = <&ccu 21>;
+			clock-names = "cpu";
+			#cooling-cells = <2>;
 		};
 
 		cpu2: cpu@2 {
@@ -105,6 +73,9 @@
 			reg = <2>;
 			enable-method = "psci";
 			next-level-cache = <&L2>;
+			clocks = <&ccu 21>;
+			clock-names = "cpu";
+			#cooling-cells = <2>;
 		};
 
 		cpu3: cpu@3 {
@@ -113,6 +84,9 @@
 			reg = <3>;
 			enable-method = "psci";
 			next-level-cache = <&L2>;
+			clocks = <&ccu 21>;
+			clock-names = "cpu";
+			#cooling-cells = <2>;
 		};
 
 		L2: l2-cache {
@@ -211,6 +185,69 @@
 			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 	};
 
+	thermal-zones {
+		cpu_thermal: cpu0-thermal {
+			/* milliseconds */
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 0>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu_alert1>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu_alert0: cpu_alert0 {
+					/* milliCelsius */
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_alert1: cpu_alert1 {
+					/* milliCelsius */
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu_crit: cpu_crit {
+					/* milliCelsius */
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu0_thermal: gpu0-thermal {
+			/* milliseconds */
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 1>;
+		};
+
+		gpu1_thermal: gpu1-thermal {
+			/* milliseconds */
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 2>;
+		};
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -382,6 +419,12 @@
 					#address-cells = <1>;
 					#size-cells = <0>;
 					reg = <1>;
+
+					tcon0_out_dsi: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&dsi_in_tcon0>;
+						allwinner,tcon-channel = <1>;
+					};
 				};
 			};
 		};
@@ -485,6 +528,12 @@
 		sid: eeprom@1c14000 {
 			compatible = "allwinner,sun50i-a64-sid";
 			reg = <0x1c14000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ths_calibration: thermal-sensor-calibration@34 {
+				reg = <0x34 0x8>;
+			};
 		};
 
 		crypto: crypto@1c15000 {
@@ -593,7 +642,7 @@
 			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ccu 58>, <&osc24M>, <&rtc 0>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>;
 			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			#gpio-cells = <3>;
@@ -810,6 +859,18 @@
 			status = "disabled";
 		};
 
+		ths: thermal-sensor@1c25000 {
+			compatible = "allwinner,sun50i-a64-ths";
+			reg = <0x01c25000 0x100>;
+			clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>;
+			clock-names = "bus", "mod";
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&ccu RST_BUS_THS>;
+			nvmem-cells = <&ths_calibration>;
+			nvmem-cell-names = "calibration";
+			#thermal-sensor-cells = <1>;
+		};
+
 		uart0: serial@1c28000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28000 0x400>;
@@ -1014,6 +1075,37 @@
 			status = "disabled";
 		};
 
+		dsi: dsi@1ca0000 {
+			compatible = "allwinner,sun50i-a64-mipi-dsi";
+			reg = <0x01ca0000 0x1000>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_MIPI_DSI>;
+			resets = <&ccu RST_BUS_MIPI_DSI>;
+			phys = <&dphy>;
+			phy-names = "dphy";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port {
+				dsi_in_tcon0: endpoint {
+					remote-endpoint = <&tcon0_out_dsi>;
+				};
+			};
+		};
+
+		dphy: d-phy@1ca1000 {
+			compatible = "allwinner,sun50i-a64-mipi-dphy",
+				     "allwinner,sun6i-a31-mipi-dphy";
+			reg = <0x01ca1000 0x1000>;
+			clocks = <&ccu CLK_BUS_MIPI_DSI>,
+				 <&ccu CLK_DSI_DPHY>;
+			clock-names = "bus", "mod";
+			resets = <&ccu RST_BUS_MIPI_DSI>;
+			status = "disabled";
+			#phy-cells = <0>;
+		};
+
 		hdmi: hdmi@1ee0000 {
 			compatible = "allwinner,sun50i-a64-dw-hdmi",
 				     "allwinner,sun8i-a83t-dw-hdmi";
@@ -1051,7 +1143,7 @@
 			compatible = "allwinner,sun50i-a64-hdmi-phy";
 			reg = <0x01ef0000 0x10000>;
 			clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
-				 <&ccu 7>;
+				 <&ccu CLK_PLL_VIDEO0>;
 			clock-names = "bus", "mod", "pll-0";
 			resets = <&ccu RST_BUS_HDMI0>;
 			reset-names = "phy";
@@ -1081,7 +1173,8 @@
 		r_ccu: clock@1f01400 {
 			compatible = "allwinner,sun50i-a64-r-ccu";
 			reg = <0x01f01400 0x100>;
-			clocks = <&osc24M>, <&rtc 0>, <&rtc 2>, <&ccu 11>;
+			clocks = <&osc24M>, <&rtc 0>, <&rtc 2>,
+				 <&ccu CLK_PLL_PERIPH0>;
 			clock-names = "hosc", "losc", "iosc", "pll-periph";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts
index c924090331d0..076a0b983101 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts
@@ -1,8 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+// Copyright (C) 2018 Aleksandr Aleksandrov <aleksandr.aleksandrov@emlid.com>
+
 /*
  * DTS for Emlid Neutis N5 Dev board.
- *
- * Copyright (C) 2018 Aleksandr Aleksandrov <aleksandr.aleksandrov@emlid.com>
  */
 
 /dts-v1/;
@@ -15,14 +15,6 @@
 		     "emlid,neutis-n5",
 		     "allwinner,sun50i-h5";
 
-	aliases {
-		serial0 = &uart0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
 	connector {
 		compatible = "hdmi-connector";
 		type = "a";
@@ -34,16 +26,6 @@
 		};
 	};
 
-	reg_usb0_vbus: usb0-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb0-vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		enable-active-high;
-		gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>;   /* PL9 */
-		status = "okay";
-	};
-
 	vdd_cpux: gpio-regulator {
 		compatible = "regulator-gpio";
 		regulator-name = "vdd-cpux";
@@ -59,33 +41,11 @@
 	};
 };
 
-&codec {
-	allwinner,audio-routing =
-		"Line Out", "LINEOUT",
-		"LINEIN", "Line In",
-		"MIC1", "Mic",
-		"MIC2", "Mic",
-		"Mic",  "MBIAS";
-	status = "okay";
-};
-
-&de {
-	status = "okay";
-};
-
-&ehci0 {
-	status = "okay";
+&cpu0 {
+	cpu-supply = <&vdd_cpux>;
 };
 
-&ehci1 {
-	status = "okay";
-};
-
-&ehci2 {
-	status = "okay";
-};
-
-&ehci3 {
+&codec {
 	status = "okay";
 };
 
@@ -106,42 +66,6 @@
 	};
 };
 
-&mmc0 {
-	vmmc-supply = <&reg_vcc3v3>;
-	bus-width = <4>;
-	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
-	status = "okay";
-};
-
-&ohci0 {
-	status = "okay";
-};
-
-&ohci1 {
-	status = "okay";
-};
-
-&ohci2 {
-	status = "okay";
-};
-
-&ohci3 {
-	status = "okay";
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pa_pins>;
-	status = "okay";
-};
-
-&usb_otg {
-	dr_mode = "otg";
-	status = "okay";
-};
-
-&usbphy {
-	usb0_id_det-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
-	usb0_vbus-supply = <&reg_usb0_vbus>;
+&i2c1 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi
index 5bec574fa108..fc570011495f 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi
@@ -1,73 +1,11 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+// Copyright (C) 2018 Aleksandr Aleksandrov <aleksandr.aleksandrov@emlid.com>
+
 /*
  * DTSI for Emlid Neutis N5 SoM.
- *
- * Copyright (C) 2018 Aleksandr Aleksandrov <aleksandr.aleksandrov@emlid.com>
  */
 
 /dts-v1/;
 
 #include "sun50i-h5.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	reg_vcc3v3: vcc3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	wifi_pwrseq: wifi_pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&pio 2 7 GPIO_ACTIVE_LOW>; /* PC7 */
-		post-power-on-delay-ms = <200>;
-		clocks = <&rtc 1>;
-		clock-names = "ext_clock";
-	};
-};
-
-&mmc1 {
-	vmmc-supply = <&reg_vcc3v3>;
-	vqmmc-supply = <&reg_vcc3v3>;
-	mmc-pwrseq = <&wifi_pwrseq>;
-	bus-width = <4>;
-	non-removable;
-	status = "okay";
-
-	brcmf: wifi@1 {
-		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
-		interrupt-parent = <&r_pio>;
-		interrupts = <0 5 IRQ_TYPE_LEVEL_LOW>;	/* PL5 */
-		interrupt-names = "host-wake";
-	};
-};
-
-&mmc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_8bit_pins>;
-	vmmc-supply = <&reg_vcc3v3>;
-	bus-width = <8>;
-	non-removable;
-	cap-mmc-hw-reset;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
-	uart-has-rtscts;
-	status = "okay";
-
-	bluetooth {
-		compatible = "brcm,bcm43438-bt";
-		clocks = <&rtc 1>;
-		clock-names = "lpo";
-		vbat-supply = <&reg_vcc3v3>;
-		vddio-supply = <&reg_vcc3v3>;
-		shutdown-gpios = <&pio 2 4 GPIO_ACTIVE_HIGH>; /* PC4 */
-		device-wakeup-gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
-	};
-};
+#include <arm/sunxi-h3-h5-emlid-neutis.dtsi>
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-cc.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-cc.dts
index d68bdfea2271..64d35daf2023 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-cc.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-cc.dts
@@ -1,8 +1,6 @@
 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2018 BayLibre, SAS
- * Author: Neil Armstrong <narmstrong@baylibre.com>
- */
+// Copyright (C) 2018 BayLibre, SAS
+// Author: Neil Armstrong <narmstrong@baylibre.com>
 
 /dts-v1/;
 #include "sun50i-h5.dtsi"
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-it.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-it.dts
new file mode 100644
index 000000000000..e59d68b525fc
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-it.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2019 Chen-Yu Tsai <wens@csie.org>
+
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+#include <arm/sunxi-libretech-all-h3-it.dtsi>
+
+/ {
+	model = "Libre Computer Board ALL-H3-IT H5";
+	compatible = "libretech,all-h3-it-h5", "allwinner,sun50i-h5";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h5-cc.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h5-cc.dts
new file mode 100644
index 000000000000..df1b9263ad0e
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h5-cc.dts
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2020 Chen-Yu Tsai <wens@csie.org>
+
+#include "sun50i-h5-libretech-all-h3-cc.dts"
+
+/ {
+	model = "Libre Computer Board ALL-H5-CC H5";
+	compatible = "libretech,all-h5-cc-h5", "allwinner,sun50i-h5";
+
+	aliases {
+		spi0 = &spi0;
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <5000>;
+		enable-active-high;
+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&reg_vcc5v0>;
+	};
+};
+
+&codec {
+	/* No line out; only onboard microphone */
+	allwinner,audio-routing =
+		"MIC1", "Mic",
+		"Mic",  "MBIAS";
+};
+
+/* This board has external PHY */
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_gmac_3v3>;
+	phy-handle = <&ext_rgmii_phy>;
+	phy-mode = "rgmii";
+	/delete-property/ allwinner,leds-active-low;
+	status = "okay";
+};
+
+&external_mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&spi0  {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts
index 1c7dde84e54d..4f9ba53ffaae 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts
@@ -1,45 +1,6 @@
-/*
- * Copyright (C) 2017 Antony Antony <antony@phenome.org>
- * Copyright (C) 2016 ARM Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2017 Antony Antony <antony@phenome.org>
+// Copyright (C) 2016 ARM Ltd.
 
 /dts-v1/;
 #include "sun50i-h5.dtsi"
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts
index 57a6f45036c1..b059e20813bd 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts
@@ -1,44 +1,5 @@
-/*
- * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
 
 /dts-v1/;
 #include "sun50i-h5.dtsi"
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
index e126c1c9f05c..70b5f0998421 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
@@ -1,44 +1,5 @@
-/*
- * Copyright (C) 2016 ARM Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2016 ARM Ltd.
 
 /dts-v1/;
 #include "sun50i-h5.dtsi"
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
index d9b3ed257088..cb44bfa5981f 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
@@ -1,47 +1,7 @@
-/*
- * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.xyz>
- *
- * Based on sun50i-h5-orangepi-pc2.dts, which is:
- *   Copyright (C) 2016 ARM Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.xyz>
+// Based on sun50i-h5-orangepi-pc2.dts, which is:
+//   Copyright (C) 2016 ARM Ltd.
 
 /dts-v1/;
 #include "sun50i-h5.dtsi"
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts
index db6ea7b58999..ef5ca6444220 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts
@@ -1,9 +1,6 @@
-/*
- * Copyright (C) 2016 ARM Ltd.
- * Copyright (C) 2018 Hauke Mehrtens <hauke@hauke-m.de>
- *
- * SPDX-License-Identifier: (GPL-2.0+ OR X11)
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2016 ARM Ltd.
+// Copyright (C) 2018 Hauke Mehrtens <hauke@hauke-m.de>
 
 /dts-v1/;
 #include "sun50i-h5.dtsi"
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
index dacf61399527..c95a68541309 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
@@ -1,44 +1,5 @@
-/*
- * Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
 
 /dts-v1/;
 
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
index e92c4de5bf3b..9893aa64dd0b 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
@@ -1,44 +1,5 @@
-/*
- * Copyright (C) 2016 ARM Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2016 ARM Ltd.
 
 #include <arm/sunxi-h3-h5.dtsi>
 
@@ -54,21 +15,21 @@
 			enable-method = "psci";
 		};
 
-		cpu@1 {
+		cpu1: cpu@1 {
 			compatible = "arm,cortex-a53";
 			device_type = "cpu";
 			reg = <1>;
 			enable-method = "psci";
 		};
 
-		cpu@2 {
+		cpu2: cpu@2 {
 			compatible = "arm,cortex-a53";
 			device_type = "cpu";
 			reg = <2>;
 			enable-method = "psci";
 		};
 
-		cpu@3 {
+		cpu3: cpu@3 {
 			compatible = "arm,cortex-a53";
 			device_type = "cpu";
 			reg = <3>;
@@ -76,6 +37,16 @@
 		};
 	};
 
+	pmu {
+		compatible = "arm,cortex-a53-pmu",
+			     "arm,armv8-pmuv3";
+		interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
 	psci {
 		compatible = "arm,psci-0.2";
 		method = "smc";
@@ -176,6 +147,32 @@
 			assigned-clocks = <&ccu CLK_GPU>;
 			assigned-clock-rates = <384000000>;
 		};
+
+		ths: thermal-sensor@1c25000 {
+			compatible = "allwinner,sun50i-h5-ths";
+			reg = <0x01c25000 0x400>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&ccu RST_BUS_THS>;
+			clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>;
+			clock-names = "bus", "mod";
+			nvmem-cells = <&ths_calibration>;
+			nvmem-cell-names = "calibration";
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 0>;
+		};
+
+		gpu_thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 1>;
+		};
 	};
 };
 
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
index f335f7482a73..df6d872c34e2 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
@@ -1,7 +1,5 @@
-// SPDX-License-Identifier: (GPL-2.0+ or MIT)
-/*
- * Copyright (C) 2019 Clément Péron <peron.clem@gmail.com>
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2019 Clément Péron <peron.clem@gmail.com>
 
 /dts-v1/;
 
@@ -76,6 +74,10 @@
 	status = "okay";
 };
 
+&dwc3 {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -292,3 +294,7 @@
 	usb0_vbus-supply = <&reg_vcc5v>;
 	status = "okay";
 };
+
+&usb3phy {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
index 4ed3fc2c7734..c311eee52a35 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
@@ -1,7 +1,5 @@
-// SPDX-License-Identifier: (GPL-2.0+ or MIT)
-/*
- * Copyright (C) 2019 Ondřej Jirman <megous@megous.com>
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2019 Ondřej Jirman <megous@megous.com>
 
 /dts-v1/;
 
@@ -274,6 +272,10 @@
 	};
 };
 
+&r_ir {
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_ph_pins>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dts
index e098a2475f2d..e7ca75c0d0f7 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dts
@@ -1,7 +1,5 @@
-// SPDX-License-Identifier: (GPL-2.0+ or MIT)
-/*
- * Copyright (C) 2018 Jagan Teki <jagan@openedev.com>
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2018 Jagan Teki <jagan@openedev.com>
 
 #include "sun50i-h6-orangepi.dtsi"
 
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts
index 12e17567ab56..83aab7368889 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts
@@ -1,8 +1,6 @@
-// SPDX-License-Identifier: (GPL-2.0+ or MIT)
-/*
- * Copyright (C) 2018 Amarula Solutions
- * Author: Jagan Teki <jagan@amarulasolutions.com>
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2018 Amarula Solutions
+// Author: Jagan Teki <jagan@amarulasolutions.com>
 
 #include "sun50i-h6-orangepi.dtsi"
 
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi
index df4cbd7ef96c..37f4c57597d4 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi
@@ -1,8 +1,6 @@
-// SPDX-License-Identifier: (GPL-2.0+ or MIT)
-/*
- * Copyright (C) 2018 Amarula Solutions
- * Author: Jagan Teki <jagan@amarulasolutions.com>
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2018 Amarula Solutions
+// Author: Jagan Teki <jagan@amarulasolutions.com>
 
 /dts-v1/;
 
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-model-b.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-model-b.dts
new file mode 100644
index 000000000000..f4c8966a6497
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-model-b.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+/*
+ * Copyright (C) 2019 Corentin LABBE <clabbe@baylibre.com>
+ */
+
+#include "sun50i-h6-pine-h64.dts"
+
+/ {
+	model = "Pine H64 model B";
+	compatible = "pine64,pine-h64-model-b", "allwinner,sun50i-h6";
+
+	/delete-node/ reg_gmac_3v3;
+};
+
+&hdmi_connector {
+	/delete-property/ ddc-en-gpios;
+};
+
+&emac {
+	phy-supply = <&reg_aldo2>;
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
index 74899ede00fb..d1c2aa5b3a20 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
@@ -1,7 +1,5 @@
-// SPDX-License-Identifier: (GPL-2.0+ or MIT)
-/*
- * Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.io>
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.io>
 
 /dts-v1/;
 
@@ -10,7 +8,7 @@
 #include <dt-bindings/gpio/gpio.h>
 
 / {
-	model = "Pine H64";
+	model = "Pine H64 model A";
 	compatible = "pine64,pine-h64", "allwinner,sun50i-h6";
 
 	aliases {
@@ -22,9 +20,10 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	connector {
+	hdmi_connector: connector {
 		compatible = "hdmi-connector";
 		type = "a";
+		ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
 
 		port {
 			hdmi_con_in: endpoint {
@@ -52,6 +51,16 @@
 		};
 	};
 
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		gpio = <&pio 2 16 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
 	reg_usb_vbus: vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "usb-vbus";
@@ -68,7 +77,7 @@
 	pinctrl-0 = <&ext_rgmii_pins>;
 	phy-mode = "rgmii";
 	phy-handle = <&ext_rgmii_phy>;
-	phy-supply = <&reg_aldo2>;
+	phy-supply = <&reg_gmac_3v3>;
 	allwinner,rx-delay-ps = <200>;
 	allwinner,tx-delay-ps = <200>;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts
index bccfe1e65b6a..83e6cb0e59ce 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts
@@ -1,7 +1,5 @@
-// SPDX-License-Identifier: (GPL-2.0+ or MIT)
-/*
- * Copyright (c) 2019 Jernej Skrabec <jernej.skrabec@siol.net>
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2019 Jernej Skrabec <jernej.skrabec@siol.net>
 
 /dts-v1/;
 
@@ -45,6 +43,10 @@
 	status = "okay";
 };
 
+&dwc3 {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -85,6 +87,7 @@
 };
 
 &r_ir {
+	linux,rc-map-name = "rc-tanix-tx5max";
 	status = "okay";
 };
 
@@ -102,3 +105,7 @@
 &usb2phy {
 	status = "okay";
 };
+
+&usb3phy {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
index 29824081b43b..3329283e38ab 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -1,7 +1,5 @@
-// SPDX-License-Identifier: (GPL-2.0+ or MIT)
-/*
- * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/sun50i-h6-ccu.h>
@@ -11,6 +9,7 @@
 #include <dt-bindings/reset/sun50i-h6-ccu.h>
 #include <dt-bindings/reset/sun50i-h6-r-ccu.h>
 #include <dt-bindings/reset/sun8i-de2.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	interrupt-parent = <&gic>;
@@ -70,6 +69,16 @@
 		clock-output-names = "ext_osc32k";
 	};
 
+	pmu {
+		compatible = "arm,cortex-a53-pmu",
+			     "arm,armv8-pmuv3";
+		interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
 	psci {
 		compatible = "arm,psci-0.2";
 		method = "smc";
@@ -233,6 +242,12 @@
 		sid: efuse@3006000 {
 			compatible = "allwinner,sun50i-h6-sid";
 			reg = <0x03006000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ths_calibration: thermal-sensor-calibration@14 {
+				reg = <0x14 0x8>;
+			};
 		};
 
 		watchdog: watchdog@30090a0 {
@@ -245,6 +260,16 @@
 			status = "disabled";
 		};
 
+		pwm: pwm@300a000 {
+			compatible = "allwinner,sun50i-h6-pwm";
+			reg = <0x0300a000 0x400>;
+			clocks = <&osc24M>, <&ccu CLK_BUS_PWM>;
+			clock-names = "mod", "bus";
+			resets = <&ccu RST_BUS_PWM>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
 		pio: pinctrl@300b000 {
 			compatible = "allwinner,sun50i-h6-pinctrl";
 			reg = <0x0300b000 0x400>;
@@ -856,5 +881,31 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};
+
+		ths: thermal-sensor@5070400 {
+			compatible = "allwinner,sun50i-h6-ths";
+			reg = <0x05070400 0x100>;
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_THS>;
+			clock-names = "bus";
+			resets = <&ccu RST_BUS_THS>;
+			nvmem-cells = <&ths_calibration>;
+			nvmem-cell-names = "calibration";
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 0>;
+		};
+
+		gpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 1>;
+		};
 	};
 };
diff --git a/arch/arm64/boot/dts/altera/Makefile b/arch/arm64/boot/dts/altera/Makefile
index 27bb925adc8d..10119c7ab437 100644
--- a/arch/arm64/boot/dts/altera/Makefile
+++ b/arch/arm64/boot/dts/altera/Makefile
@@ -1,2 +1,3 @@
 # SPDX-License-Identifier: GPL-2.0-only
-dtb-$(CONFIG_ARCH_STRATIX10) += socfpga_stratix10_socdk.dtb
+dtb-$(CONFIG_ARCH_STRATIX10) += socfpga_stratix10_socdk.dtb \
+				socfpga_stratix10_socdk_nand.dtb
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts
new file mode 100644
index 000000000000..9946515b8afd
--- /dev/null
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts
@@ -0,0 +1,223 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright Altera Corporation (C) 2015. All rights reserved.
+ */
+
+#include "socfpga_stratix10.dtsi"
+
+/ {
+	model = "SoCFPGA Stratix 10 SoCDK";
+
+	aliases {
+		serial0 = &uart0;
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+		ethernet2 = &gmac2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		hps0 {
+			label = "hps_led0";
+			gpios = <&portb 20 GPIO_ACTIVE_HIGH>;
+		};
+
+		hps1 {
+			label = "hps_led1";
+			gpios = <&portb 19 GPIO_ACTIVE_HIGH>;
+		};
+
+		hps2 {
+			label = "hps_led2";
+			gpios = <&portb 21 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the reg */
+		reg = <0 0 0 0>;
+	};
+
+	ref_033v: 033-v-ref {
+		compatible = "regulator-fixed";
+		regulator-name = "0.33V";
+		regulator-min-microvolt = <330000>;
+		regulator-max-microvolt = <330000>;
+	};
+
+	soc {
+		clocks {
+			osc1 {
+				clock-frequency = <25000000>;
+			};
+		};
+
+		eccmgr {
+			sdmmca-ecc@ff8c8c00 {
+				compatible = "altr,socfpga-s10-sdmmc-ecc",
+					     "altr,socfpga-sdmmc-ecc";
+				reg = <0xff8c8c00 0x100>;
+				altr,ecc-parent = <&mmc>;
+				interrupts = <14 4>,
+					     <15 4>;
+			};
+		};
+	};
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gmac2 {
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-handle = <&phy0>;
+
+	max-frame-size = <9000>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy0: ethernet-phy@0 {
+			reg = <4>;
+
+			txd0-skew-ps = <0>; /* -420ps */
+			txd1-skew-ps = <0>; /* -420ps */
+			txd2-skew-ps = <0>; /* -420ps */
+			txd3-skew-ps = <0>; /* -420ps */
+			rxd0-skew-ps = <420>; /* 0ps */
+			rxd1-skew-ps = <420>; /* 0ps */
+			rxd2-skew-ps = <420>; /* 0ps */
+			rxd3-skew-ps = <420>; /* 0ps */
+			txen-skew-ps = <0>; /* -420ps */
+			txc-skew-ps = <900>; /* 0ps */
+			rxdv-skew-ps = <420>; /* 0ps */
+			rxc-skew-ps = <1680>; /* 780ps */
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		nand-bus-width = <16>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0 0x200000>;
+		};
+
+		partition@200000 {
+			label = "env";
+			reg = <0x200000 0x40000>;
+		};
+
+		partition@240000 {
+			label = "dtb";
+			reg = <0x240000 0x40000>;
+		};
+
+		partition@280000 {
+			label = "kernel";
+			reg = <0x280000 0x2000000>;
+		};
+
+		partition@2280000 {
+			label = "misc";
+			reg = <0x2280000 0x2000000>;
+		};
+
+		partition@4280000 {
+			label = "rootfs";
+			reg = <0x4280000 0x3bd80000>;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	disable-over-current;
+};
+
+&watchdog0 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+	clock-frequency = <100000>;
+	i2c-sda-falling-time-ns = <890>;  /* hcnt */
+	i2c-sdl-falling-time-ns = <890>;  /* lcnt */
+
+	adc@14 {
+		compatible = "lltc,ltc2497";
+		reg = <0x14>;
+		vref-supply = <&ref_033v>;
+	};
+
+	temp@4c {
+		compatible = "maxim,max1619";
+		reg = <0x4c>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c32";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
+&qspi {
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "n25q00a";
+		reg = <0>;
+		spi-max-frequency = <100000000>;
+
+		m25p,fast-read;
+		cdns,page-size = <256>;
+		cdns,block-size = <16>;
+		cdns,read-delay = <1>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			qspi_boot: partition@0 {
+				label = "Boot and fpga data";
+				reg = <0x0 0x034B0000>;
+			};
+
+			qspi_rootfs: partition@4000000 {
+				label = "Root Filesystem - JFFS2";
+				reg = <0x034B0000 0x0EB50000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index 63400538d39f..eef0045320f2 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-khadas-vim3.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12b-s922x-khadas-vim3.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12b-ugoos-am6.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-kii-pro.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nanopi-k2.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nexbox-a95x.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-odroidc2.dtb
@@ -29,11 +30,13 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-phicomm-n1.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s805x-p241.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-p281.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-tx3-mini.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-libretech-pc.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-khadas-vim2.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-nexbox-a1.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q200.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q201.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-rbox-pro.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-libretech-pc.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-vega-s96.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
index 7210ad049d1d..4dec518c4dde 100644
--- a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
@@ -5,6 +5,7 @@
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/meson-a1-gpio.h>
 
 / {
 	compatible = "amlogic,a1";
@@ -74,6 +75,30 @@
 			#size-cells = <2>;
 			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x1000000>;
 
+
+			reset: reset-controller@0 {
+				compatible = "amlogic,meson-a1-reset";
+				reg = <0x0 0x0 0x0 0x8c>;
+				#reset-cells = <1>;
+			};
+
+			periphs_pinctrl: pinctrl@0400 {
+				compatible = "amlogic,meson-a1-periphs-pinctrl";
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges;
+
+				gpio: bank@0400 {
+					reg = <0x0 0x0400 0x0 0x003c>,
+					      <0x0 0x0480 0x0 0x0118>;
+					reg-names = "mux", "gpio";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 0 62>;
+				};
+
+			};
+
 			uart_AO: serial@1c00 {
 				compatible = "amlogic,meson-gx-uart",
 					     "amlogic,meson-ao-uart";
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index 04803c3bccfa..aace3d32a3df 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -1169,6 +1169,7 @@
 				interrupts = <GIC_SPI 84 IRQ_TYPE_EDGE_RISING>;
 				clocks = <&clkc_audio AUD_CLKID_TODDR_A>;
 				resets = <&arb AXG_ARB_TODDR_A>;
+				amlogic,fifo-depth = <512>;
 				status = "disabled";
 			};
 
@@ -1180,6 +1181,7 @@
 				interrupts = <GIC_SPI 85 IRQ_TYPE_EDGE_RISING>;
 				clocks = <&clkc_audio AUD_CLKID_TODDR_B>;
 				resets = <&arb AXG_ARB_TODDR_B>;
+				amlogic,fifo-depth = <256>;
 				status = "disabled";
 			};
 
@@ -1191,6 +1193,7 @@
 				interrupts = <GIC_SPI 86 IRQ_TYPE_EDGE_RISING>;
 				clocks = <&clkc_audio AUD_CLKID_TODDR_C>;
 				resets = <&arb AXG_ARB_TODDR_C>;
+				amlogic,fifo-depth = <256>;
 				status = "disabled";
 			};
 
@@ -1202,6 +1205,7 @@
 				interrupts = <GIC_SPI 88 IRQ_TYPE_EDGE_RISING>;
 				clocks = <&clkc_audio AUD_CLKID_FRDDR_A>;
 				resets = <&arb AXG_ARB_FRDDR_A>;
+				amlogic,fifo-depth = <512>;
 				status = "disabled";
 			};
 
@@ -1213,6 +1217,7 @@
 				interrupts = <GIC_SPI 89 IRQ_TYPE_EDGE_RISING>;
 				clocks = <&clkc_audio AUD_CLKID_FRDDR_B>;
 				resets = <&arb AXG_ARB_FRDDR_B>;
+				amlogic,fifo-depth = <256>;
 				status = "disabled";
 			};
 
@@ -1224,6 +1229,7 @@
 				interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>;
 				clocks = <&clkc_audio AUD_CLKID_FRDDR_C>;
 				resets = <&arb AXG_ARB_FRDDR_C>;
+				amlogic,fifo-depth = <256>;
 				status = "disabled";
 			};
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index 7fabc8d9654a..abe04f4ad7d8 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -1968,6 +1968,29 @@
 			};
 		};
 
+		vdec: video-decoder@ff620000 {
+			compatible = "amlogic,g12a-vdec";
+			reg = <0x0 0xff620000 0x0 0x10000>,
+			      <0x0 0xffd0e180 0x0 0xe4>;
+			reg-names = "dos", "esparser";
+			interrupts = <GIC_SPI 44 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "vdec", "esparser";
+
+			amlogic,ao-sysctrl = <&rti>;
+			amlogic,canvas = <&canvas>;
+
+			clocks = <&clkc CLKID_PARSER>,
+				 <&clkc CLKID_DOS>,
+				 <&clkc CLKID_VDEC_1>,
+				 <&clkc CLKID_VDEC_HEVC>,
+				 <&clkc CLKID_VDEC_HEVCF>;
+			clock-names = "dos_parser", "dos", "vdec_1",
+				      "vdec_hevc", "vdec_hevcf";
+			resets = <&reset RESET_PARSER>;
+			reset-names = "esparser";
+		};
+
 		vpu: vpu@ff900000 {
 			compatible = "amlogic,meson-g12a-vpu";
 			reg = <0x0 0xff900000 0x0 0x100000>,
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12.dtsi
index b3ba2fda8af8..03054c478896 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12.dtsi
@@ -106,6 +106,7 @@
 			resets = <&arb AXG_ARB_TODDR_A>,
 				 <&clkc_audio AUD_RESET_TODDR_A>;
 			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <512>;
 			status = "disabled";
 		};
 
@@ -120,6 +121,7 @@
 			resets = <&arb AXG_ARB_TODDR_B>,
 				 <&clkc_audio AUD_RESET_TODDR_B>;
 			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <256>;
 			status = "disabled";
 		};
 
@@ -134,6 +136,7 @@
 			resets = <&arb AXG_ARB_TODDR_C>,
 				 <&clkc_audio AUD_RESET_TODDR_C>;
 			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <256>;
 			status = "disabled";
 		};
 
@@ -148,6 +151,7 @@
 			resets = <&arb AXG_ARB_FRDDR_A>,
 				 <&clkc_audio AUD_RESET_FRDDR_A>;
 			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <512>;
 			status = "disabled";
 		};
 
@@ -162,6 +166,7 @@
 			resets = <&arb AXG_ARB_FRDDR_B>,
 				 <&clkc_audio AUD_RESET_FRDDR_B>;
 			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <256>;
 			status = "disabled";
 		};
 
@@ -176,6 +181,7 @@
 			resets = <&arb AXG_ARB_FRDDR_C>,
 				 <&clkc_audio AUD_RESET_FRDDR_C>;
 			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <256>;
 			status = "disabled";
 		};
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi
new file mode 100644
index 000000000000..248b018c83d5
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi
@@ -0,0 +1,375 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 BayLibre SAS.
+ * Author: Jerome Brunet <jbrunet@baylibre.com>
+ */
+
+/* Libretech Amlogic GX PC form factor - AKA: Tartiflette */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+
+		update-button {
+			label = "update";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <1300000>;
+		};
+	};
+
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+		spi0 = &spifc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	cvbs-connector {
+		compatible = "composite-video-connector";
+		status = "disabled";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		power-button {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	ao_5v: regulator-ao_5v {
+		compatible = "regulator-fixed";
+		regulator-name = "AO_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_in>;
+		regulator-always-on;
+	};
+
+	dc_in: regulator-dc_in {
+		compatible = "regulator-fixed";
+		regulator-name = "DC_IN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		green {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DISK_ACTIVITY;
+			gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "disk-activity";
+		};
+
+		blue {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio GPIODV_28 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			panic-indicator;
+		};
+	};
+
+	vcc_card: regulator-vcc_card {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_CARD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddio_ao3v3>;
+
+		gpio = <&gpio GPIODV_4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vcc5v: regulator-vcc5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&ao_5v>;
+
+		gpio = <&gpio GPIOH_3 GPIO_OPEN_DRAIN>;
+	};
+
+	vddio_ao18: regulator-vddio_ao18 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&ao_5v>;
+		regulator-always-on;
+	};
+
+	vddio_ao3v3: regulator-vddio_ao3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&ao_5v>;
+		regulator-always-on;
+	};
+
+	vddio_boot: regulator-vddio_boot {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddio_ao3v3>;
+		regulator-always-on;
+	};
+
+	vddio_card: regulator-vddio-card {
+		compatible = "regulator-gpio";
+		regulator-name = "VDDIO_CARD";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio GPIODV_5 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+
+		states = <3300000 0>,
+			 <1800000 1>;
+
+		regulator-settling-time-up-us = <200>;
+		regulator-settling-time-down-us = <50000>;
+	};
+};
+
+&cec_AO {
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+	status = "okay";
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&ethmac {
+	pinctrl-0 = <&eth_pins>, <&eth_phy_irq_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&external_phy>;
+	amlogic,tx-delay-ns = <2>;
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
+&external_mdio {
+	external_phy: ethernet-phy@0 {
+		reg = <0>;
+		max-speed = <1000>;
+		reset-assert-us = <10000>;
+		reset-deassert-us = <30000>;
+		reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
+		interrupt-parent = <&gpio_intc>;
+		interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&pinctrl_periphs {
+	/*
+	 * Make sure the reset pin of the usb HUB is driven high to take
+	 * it out of reset.
+	 */
+	usb1_rst_pins: usb1_rst_irq {
+		mux {
+			groups = "GPIODV_3";
+			function = "gpio_periphs";
+			bias-disable;
+			output-high;
+		};
+	};
+
+	/* Make sure the phy irq pin is properly configured as input */
+	eth_phy_irq_pins: eth_phy_irq {
+		mux {
+			groups = "GPIOZ_15";
+			function = "gpio_periphs";
+			bias-disable;
+			output-disable;
+		};
+	};
+};
+
+&hdmi_tx {
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&vcc5v>;
+	status = "okay";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&ir {
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2c_C {
+	pinctrl-0 = <&i2c_c_dv18_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	rtc: rtc@51 {
+		reg = <0x51>;
+		compatible = "nxp,pcf8563";
+		#clock-cells = <0>;
+		clock-output-names = "rtc_clkout";
+	};
+};
+
+&pwm_AO_ab {
+	pinctrl-0 = <&pwm_ao_a_3_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+	status = "okay";
+};
+
+&pwm_ab {
+	pinctrl-0 = <&pwm_b_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+	status = "okay";
+};
+
+&pwm_ef {
+	pinctrl-0 = <&pwm_e_pins>, <&pwm_f_clk_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vddio_ao18>;
+	status = "okay";
+};
+
+/* SD card */
+&sd_emmc_b {
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-ddr50;
+	max-frequency = <200000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+	vmmc-supply = <&vcc_card>;
+	vqmmc-supply = <&vddio_card>;
+
+	status = "okay";
+};
+
+/* eMMC */
+&sd_emmc_c {
+	pinctrl-0 = <&emmc_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	max-frequency = <200000000>;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vddio_ao3v3>;
+	vqmmc-supply = <&vddio_boot>;
+
+	status = "okay";
+};
+
+&spifc {
+	pinctrl-0 = <&nor_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	gd25lq128: spi-flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		spi-max-frequency = <12000000>;
+	};
+};
+
+&uart_AO {
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb2_phy0 {
+	pinctrl-0 = <&usb1_rst_pins>;
+	pinctrl-names = "default";
+	phy-supply = <&vcc5v>;
+};
+
+&usb2_phy1 {
+	phy-supply = <&vcc5v>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
new file mode 100644
index 000000000000..2f1f829450a2
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Mohammad Rasim <mohammad.rasim96@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxbb-p20x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+/ {
+	compatible = "videostrong,kii-pro", "amlogic,p201", "amlogic,s905", "amlogic,meson-gxbb";
+	model = "Videostrong KII Pro";
+
+	leds {
+		compatible = "gpio-leds";
+		status {
+			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_STATUS;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+
+		button-reset {
+			label = "reset";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+};
+
+
+
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm4335a0";
+	};
+};
+
+
+
+&ethmac {
+	status = "okay";
+	pinctrl-0 = <&eth_rmii_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&eth_phy0>;
+	phy-mode = "rmii";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy0: ethernet-phy@0 {
+			/* IC Plus IP101GR (0x02430c54) */
+			reg = <0>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <10000>;
+			reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-libretech-pc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-libretech-pc.dts
new file mode 100644
index 000000000000..100a1cfeea15
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-libretech-pc.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 BayLibre SAS. All rights reserved.
+ * Author: Jerome Brunet <jbrunet@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxl-s905d.dtsi"
+#include "meson-gx-libretech-pc.dtsi"
+
+/ {
+	compatible = "libretech,aml-s905d-pc", "amlogic,s905d",
+		     "amlogic,meson-gxl";
+	model = "Libre Computer AML-S905D-PC";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index ed33d8efaf62..259d86399390 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -533,6 +533,15 @@
 			};
 		};
 
+		i2c_c_dv18_pins: i2c_c_dv18 {
+			mux {
+				groups = "i2c_sck_c_dv19",
+				      "i2c_sda_c_dv18";
+				function = "i2c_c";
+				bias-disable;
+			};
+		};
+
 		eth_pins: eth_c {
 			mux {
 				groups = "eth_mdio",
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-s912-libretech-pc.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-s912-libretech-pc.dts
new file mode 100644
index 000000000000..444c249863cb
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-s912-libretech-pc.dts
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 BayLibre SAS. All rights reserved.
+ * Author: Jerome Brunet <jbrunet@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxm.dtsi"
+#include "meson-gx-libretech-pc.dtsi"
+
+/ {
+	compatible = "libretech,aml-s912-pc", "amlogic,s912",
+		     "amlogic,meson-gxm";
+	model = "Libre Computer AML-S912-PC";
+
+	typec2_vbus: regulator-typec2_vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "TYPEC2_VBUS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v>;
+
+		gpio = <&gpio GPIODV_1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&pinctrl_periphs {
+	/*
+	 * Make sure the irq pin of the TYPE C controller is not driven
+	 * by the SoC.
+	 */
+	fusb302_irq_pins: fusb302_irq {
+		mux {
+			groups = "GPIODV_0";
+			function = "gpio_periphs";
+			bias-pull-up;
+			output-disable;
+		};
+	};
+};
+
+&i2c_C {
+	fusb302@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+
+		pinctrl-0 = <&fusb302_irq_pins>;
+		pinctrl-names = "default";
+		interrupt-parent = <&gpio_intc>;
+		interrupts = <59 IRQ_TYPE_LEVEL_LOW>;
+
+		vbus-supply = <&typec2_vbus>;
+
+		status = "okay";
+	};
+};
+
+&usb2_phy2 {
+	phy-supply = <&typec2_vbus>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
index 7894a5458dbc..d847a3fcbc85 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
@@ -201,6 +201,7 @@
 			resets = <&arb AXG_ARB_TODDR_A>,
 				 <&clkc_audio AUD_RESET_TODDR_A>;
 			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <8192>;
 			status = "disabled";
 		};
 
@@ -215,6 +216,7 @@
 			resets = <&arb AXG_ARB_TODDR_B>,
 				 <&clkc_audio AUD_RESET_TODDR_B>;
 			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <256>;
 			status = "disabled";
 		};
 
@@ -229,6 +231,7 @@
 			resets = <&arb AXG_ARB_TODDR_C>,
 				 <&clkc_audio AUD_RESET_TODDR_C>;
 			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <256>;
 			status = "disabled";
 		};
 
@@ -243,6 +246,7 @@
 			resets = <&arb AXG_ARB_FRDDR_A>,
 				 <&clkc_audio AUD_RESET_FRDDR_A>;
 			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <512>;
 			status = "disabled";
 		};
 
@@ -257,6 +261,7 @@
 			resets = <&arb AXG_ARB_FRDDR_B>,
 				 <&clkc_audio AUD_RESET_FRDDR_B>;
 			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <256>;
 			status = "disabled";
 		};
 
@@ -271,6 +276,7 @@
 			resets = <&arb AXG_ARB_FRDDR_C>,
 				 <&clkc_audio AUD_RESET_FRDDR_C>;
 			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <256>;
 			status = "disabled";
 		};
 
@@ -412,6 +418,7 @@
 			resets = <&arb AXG_ARB_TODDR_D>,
 				 <&clkc_audio AUD_RESET_TODDR_D>;
 			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <256>;
 			status = "disabled";
 		};
 
@@ -426,6 +433,7 @@
 			resets = <&arb AXG_ARB_FRDDR_D>,
 				 <&clkc_audio AUD_RESET_FRDDR_D>;
 			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <256>;
 			status = "disabled";
 		};
 	};
@@ -482,6 +490,10 @@
 	power-domains = <&pwrc PWRC_SM1_VPU_ID>;
 };
 
+&vdec {
+	compatible = "amlogic,sm1-vdec";
+};
+
 &vpu {
 	power-domains = <&pwrc PWRC_SM1_VPU_ID>;
 };
diff --git a/arch/arm64/boot/dts/bitmain/bm1880-sophon-edge.dts b/arch/arm64/boot/dts/bitmain/bm1880-sophon-edge.dts
index 3e8c70778e24..7a2c7f9c2660 100644
--- a/arch/arm64/boot/dts/bitmain/bm1880-sophon-edge.dts
+++ b/arch/arm64/boot/dts/bitmain/bm1880-sophon-edge.dts
@@ -49,12 +49,6 @@
 		reg = <0x1 0x00000000 0x0 0x40000000>; // 1GB
 	};
 
-	uart_clk: uart-clk {
-		compatible = "fixed-clock";
-		clock-frequency = <500000000>;
-		#clock-cells = <0>;
-	};
-
 	soc {
 		gpio0: gpio@50027000 {
 			porta: gpio-controller@0 {
@@ -173,21 +167,18 @@
 
 &uart0 {
 	status = "okay";
-	clocks = <&uart_clk>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart0_default>;
 };
 
 &uart1 {
 	status = "okay";
-	clocks = <&uart_clk>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1_default>;
 };
 
 &uart2 {
 	status = "okay";
-	clocks = <&uart_clk>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart2_default>;
 };
diff --git a/arch/arm64/boot/dts/bitmain/bm1880.dtsi b/arch/arm64/boot/dts/bitmain/bm1880.dtsi
index d65453f99a99..fa6e6905f588 100644
--- a/arch/arm64/boot/dts/bitmain/bm1880.dtsi
+++ b/arch/arm64/boot/dts/bitmain/bm1880.dtsi
@@ -4,6 +4,7 @@
  * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
  */
 
+#include <dt-bindings/clock/bm1880-clock.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/reset/bitmain,bm1880-reset.h>
 
@@ -66,6 +67,12 @@
 			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
 	};
 
+	osc: osc {
+		compatible = "fixed-clock";
+		clock-frequency = <25000000>;
+		#clock-cells = <0>;
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <2>;
@@ -94,6 +101,15 @@
 				reg = <0x400 0x120>;
 			};
 
+			clk: clock-controller@e8 {
+				compatible = "bitmain,bm1880-clk";
+				reg = <0xe8 0x0c>, <0x800 0xb0>;
+				reg-names = "pll", "sys";
+				clocks = <&osc>;
+				clock-names = "osc";
+				#clock-cells = <1>;
+			};
+
 			rst: reset-controller@c00 {
 				compatible = "bitmain,bm1880-reset";
 				reg = <0xc00 0x8>;
@@ -158,6 +174,9 @@
 		uart0: serial@58018000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x0 0x58018000 0x0 0x2000>;
+			clocks = <&clk BM1880_CLK_UART_500M>,
+				 <&clk BM1880_CLK_APB_UART>;
+			clock-names = "baudclk", "apb_pclk";
 			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
@@ -168,6 +187,9 @@
 		uart1: serial@5801A000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x0 0x5801a000 0x0 0x2000>;
+			clocks = <&clk BM1880_CLK_UART_500M>,
+				 <&clk BM1880_CLK_APB_UART>;
+			clock-names = "baudclk", "apb_pclk";
 			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
@@ -178,6 +200,9 @@
 		uart2: serial@5801C000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x0 0x5801c000 0x0 0x2000>;
+			clocks = <&clk BM1880_CLK_UART_500M>,
+				 <&clk BM1880_CLK_APB_UART>;
+			clock-names = "baudclk", "apb_pclk";
 			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
@@ -188,6 +213,9 @@
 		uart3: serial@5801E000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x0 0x5801e000 0x0 0x2000>;
+			clocks = <&clk BM1880_CLK_UART_500M>,
+				 <&clk BM1880_CLK_APB_UART>;
+			clock-names = "baudclk", "apb_pclk";
 			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
index 6f90b0e62cba..250fc01de78d 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * SAMSUNG Exynos5433 TM2 board device tree source
+ * Samsung Exynos5433 TM2 board device tree source
  *
  * Copyright (c) 2016 Samsung Electronics Co., Ltd.
  *
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
index dda5d2746a74..fdd0796b29d4 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * SAMSUNG Exynos5433 TM2 board device tree source
+ * Samsung Exynos5433 TM2 board device tree source
  *
  * Copyright (c) 2016 Samsung Electronics Co., Ltd.
  *
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
index 1e207ce8b97b..089fc7a1af67 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * SAMSUNG Exynos5433 TM2E board device tree source
+ * Samsung Exynos5433 TM2E board device tree source
  *
  * Copyright (c) 2016 Samsung Electronics Co., Ltd.
  *
diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
index 080e0f56e108..7af288fa9475 100644
--- a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
+++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * SAMSUNG Exynos7 Espresso board device tree source
+ * Samsung Exynos7 Espresso board device tree source
  *
  * Copyright (c) 2014 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
@@ -13,7 +13,7 @@
 #include <dt-bindings/gpio/gpio.h>
 
 / {
-	model = "Samsung Exynos7 Espresso board based on EXYNOS7";
+	model = "Samsung Exynos7 Espresso board based on Exynos7";
 	compatible = "samsung,exynos7-espresso", "samsung,exynos7";
 
 	aliases {
diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
index 3a00ef0a17ff..5558045637ac 100644
--- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * SAMSUNG EXYNOS7 SoC device tree source
+ * Samsung Exynos7 SoC device tree source
  *
  * Copyright (c) 2014 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 38e344a2f0ff..bac293e6ee33 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -18,6 +18,8 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-qds.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-clearfog-cx.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-honeycomb.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-qds.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb
 
@@ -28,7 +30,9 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-hummingboard-pulse.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-devkit.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-nitrogen.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mq-phanbell.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-pico-pi.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mq-thor96.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-rmb3.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-zest.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qxp-ai_ml.dtb
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
index 5b9d4b35dd35..ca409d907b36 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
@@ -123,6 +123,21 @@
 	status = "okay";
 };
 
+&fspi {
+	status = "okay";
+
+	mt35xu02g0: flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+		/* The following setting enables 1-1-8 (CMD-ADDR-DATA) mode */
+		spi-rx-bus-width = <8>; /* 8 SPI Rx lines */
+		spi-tx-bus-width = <1>; /* 1 SPI Tx line */
+		reg = <0>;
+	};
+};
+
 &i2c0 {
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
index 9720a190049f..afb55653850d 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
@@ -93,9 +93,26 @@
 
 &esdhc1 {
 	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	bus-width = <8>;
 	status = "okay";
 };
 
+&fspi {
+	status = "okay";
+
+	mt35xu02g0: flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+		/* The following setting enables 1-1-8 (CMD-ADDR-DATA) mode */
+		spi-rx-bus-width = <8>; /* 8 SPI Rx lines */
+		spi-tx-bus-width = <1>; /* 1 SPI Tx line */
+		reg = <0>;
+	};
+};
+
 &i2c0 {
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index a6f9b7784e8f..0bf375ec959b 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -277,6 +277,19 @@
 			status = "disabled";
 		};
 
+		fspi: spi@20c0000 {
+			compatible = "nxp,lx2160a-fspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x20c0000 0x0 0x10000>,
+			      <0x0 0x20000000 0x0 0x10000000>;
+			reg-names = "fspi_base", "fspi_mmap";
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+			clock-names = "fspi_en", "fspi";
+			status = "disabled";
+		};
+
 		esdhc: mmc@2140000 {
 			compatible = "fsl,ls1028a-esdhc", "fsl,esdhc";
 			reg = <0x0 0x2140000 0x0 0x10000>;
@@ -322,7 +335,7 @@
 
 		edma0: dma-controller@22c0000 {
 			#dma-cells = <2>;
-			compatible = "fsl,vf610-edma";
+			compatible = "fsl,ls1028a-edma";
 			reg = <0x0 0x22c0000 0x0 0x10000>,
 			      <0x0 0x22d0000 0x0 0x10000>,
 			      <0x0 0x22e0000 0x0 0x10000>;
@@ -534,6 +547,7 @@
 			dma-names = "tx", "rx";
 			dmas = <&edma0 1 4>,
 			       <&edma0 1 3>;
+			fsl,sai-asynchronous;
 			status = "disabled";
 		};
 
@@ -548,6 +562,22 @@
 			dma-names = "tx", "rx";
 			dmas = <&edma0 1 6>,
 			       <&edma0 1 5>;
+			fsl,sai-asynchronous;
+			status = "disabled";
+		};
+
+		sai3: audio-controller@f120000 {
+			#sound-dai-cells = <0>;
+			compatible = "fsl,vf610-sai";
+			reg = <0x0 0xf120000 0x0 0x10000>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+				 <&clockgen 4 1>, <&clockgen 4 1>;
+			clock-names = "bus", "mclk1", "mclk2", "mclk3";
+			dma-names = "tx", "rx";
+			dmas = <&edma0 1 8>,
+			       <&edma0 1 7>;
+			fsl,sai-asynchronous;
 			status = "disabled";
 		};
 
@@ -562,6 +592,37 @@
 			dma-names = "tx", "rx";
 			dmas = <&edma0 1 10>,
 			       <&edma0 1 9>;
+			fsl,sai-asynchronous;
+			status = "disabled";
+		};
+
+		sai5: audio-controller@f140000 {
+			#sound-dai-cells = <0>;
+			compatible = "fsl,vf610-sai";
+			reg = <0x0 0xf140000 0x0 0x10000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+				 <&clockgen 4 1>, <&clockgen 4 1>;
+			clock-names = "bus", "mclk1", "mclk2", "mclk3";
+			dma-names = "tx", "rx";
+			dmas = <&edma0 1 12>,
+			       <&edma0 1 11>;
+			fsl,sai-asynchronous;
+			status = "disabled";
+		};
+
+		sai6: audio-controller@f150000 {
+			#sound-dai-cells = <0>;
+			compatible = "fsl,vf610-sai";
+			reg = <0x0 0xf150000 0x0 0x10000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+				 <&clockgen 4 1>, <&clockgen 4 1>;
+			clock-names = "bus", "mclk1", "mclk2", "mclk3";
+			dma-names = "tx", "rx";
+			dmas = <&edma0 1 14>,
+			       <&edma0 1 13>;
+			fsl,sai-asynchronous;
 			status = "disabled";
 		};
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts
index 3595be0f2527..db3d303093f6 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts
@@ -112,6 +112,20 @@
 
 };
 
+&qspi {
+	status = "okay";
+
+	mt25qu512a0: flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+		reg = <0>;
+	};
+};
+
 #include "fsl-ls1046-post.dtsi"
 
 &fman0 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
index 0c742befb761..dbc23d6cd3b4 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
@@ -101,23 +101,23 @@
 &qspi {
 	status = "okay";
 
-	qflash0: flash@0 {
-		compatible = "spansion,m25p80";
+	s25fs512s0: flash@0 {
+		compatible = "jedec,spi-nor";
 		#address-cells = <1>;
 		#size-cells = <1>;
-		spi-max-frequency = <20000000>;
+		spi-max-frequency = <50000000>;
 		spi-rx-bus-width = <4>;
-		spi-tx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
 		reg = <0>;
 	};
 
-	qflash1: flash@1 {
-		compatible = "spansion,m25p80";
+	s25fs512s1: flash@1 {
+		compatible = "jedec,spi-nor";
 		#address-cells = <1>;
 		#size-cells = <1>;
-		spi-max-frequency = <20000000>;
+		spi-max-frequency = <50000000>;
 		spi-rx-bus-width = <4>;
-		spi-tx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
 		reg = <1>;
 	};
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
index 120e62dad154..41d8b15f25a5 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
@@ -143,6 +143,30 @@
 	status = "okay";
 };
 
+&qspi {
+	status = "okay";
+
+	s25fs512s0: flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+		reg = <0>;
+	};
+
+	s25fs512s1: flash@1 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+		reg = <1>;
+	};
+};
+
 &sata {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
index 90b198939251..4d77b345cebd 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
@@ -86,6 +86,30 @@
 	status = "okay";
 };
 
+&qspi {
+	status = "okay";
+
+	s25fs512s0: flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+		reg = <0>;
+	};
+
+	s25fs512s1: flash@1 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+		reg = <1>;
+	};
+};
+
 &sata {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index c676d0771762..594566265e3d 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -375,6 +375,19 @@
 			status = "disabled";
 		};
 
+		qspi: spi@20c0000 {
+			compatible = "fsl,ls2080a-qspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x20c0000 0x0 0x10000>,
+			      <0x0 0x20000000 0x0 0x10000000>;
+			reg-names = "QuadSPI", "QuadSPI-memory";
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "qspi_en", "qspi";
+			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+			status = "disabled";
+		};
+
 		esdhc: esdhc@2140000 {
 			compatible = "fsl,ls1088a-esdhc", "fsl,esdhc";
 			reg = <0x0 0x2140000 0x0 0x10000>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
index 6fd7f63085c9..d0d670227ae2 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
@@ -108,7 +108,15 @@
 };
 
 &qspi {
-	status = "disabled";
+	status = "okay";
+
+	s25fs512s0: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+	};
 };
 
 &sata0 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index 7a0be8eaa84a..f96d06da96be 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -618,16 +618,16 @@
 		};
 
 		qspi: spi@20c0000 {
-			status = "disabled";
-			compatible = "fsl,ls2080a-qspi", "fsl,ls1021a-qspi";
+			compatible = "fsl,ls2080a-qspi";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x20c0000 0x0 0x10000>,
 			      <0x0 0x20000000 0x0 0x10000000>;
 			reg-names = "QuadSPI", "QuadSPI-memory";
-			interrupts = <0 25 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
 			clock-names = "qspi_en", "qspi";
+			status = "disabled";
 		};
 
 		pcie1: pcie@3400000 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi
new file mode 100644
index 000000000000..071e21678f77
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Device Tree file for LX2160A-CEx7
+//
+// Copyright 2019 SolidRun Ltd.
+
+/dts-v1/;
+
+#include "fsl-lx2160a.dtsi"
+
+/ {
+	model = "SolidRun LX2160A COM Express Type 7 module";
+	compatible = "solidrun,lx2160a-cex7", "fsl,lx2160a";
+
+	aliases {
+		crypto = &crypto;
+	};
+
+	sb_3v3: regulator-sb3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "RT7290";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&crypto {
+	status = "okay";
+};
+
+&dpmac17 {
+	phy-handle = <&rgmii_phy1>;
+	phy-connection-type = "rgmii-id";
+};
+
+&emdio1 {
+	status = "okay";
+
+	rgmii_phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&esdhc1 {
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	i2c-switch@77 {
+		compatible = "nxp,pca9547";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x77>;
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			fan-temperature-ctrlr@18 {
+				compatible = "ti,amc6821";
+				reg = <0x18>;
+				cooling-min-state = <0>;
+				cooling-max-state = <9>;
+				#cooling-cells = <2>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			temperature-sensor@48 {
+				compatible = "nxp,sa56004";
+				reg = <0x48>;
+				vcc-supply = <&sb_3v3>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+
+	rtc@51 {
+		compatible = "nxp,pcf2129";
+		reg = <0x51>;
+		// IRQ10_B
+		interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+&fspi {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,m25p80";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+		/* The following setting enables 1-1-8 (CMD-ADDR-DATA) mode */
+		spi-rx-bus-width = <8>;
+		spi-tx-bus-width = <1>;
+	};
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-cx.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-cx.dts
new file mode 100644
index 000000000000..86a9b771428d
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-cx.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Device Tree file for LX2160A Clearfog CX board
+//
+// Copyright 2019 SolidRun Ltd.
+
+/dts-v1/;
+
+#include "fsl-lx2160a-clearfog-itx.dtsi"
+
+/ {
+	model = "SolidRun LX2160A Clearfog CX";
+	compatible = "solidrun,clearfog-cx",
+		"solidrun,lx2160a-cex7", "fsl,lx2160a";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi
new file mode 100644
index 000000000000..f3741a32e868
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Device Tree file for LX2160A Clearfog ITX board; this contains the
+// common parts shared between the Clearfog CX and Honeycomb builds.
+//
+// Copyright 2019 SolidRun Ltd.
+
+/dts-v1/;
+
+#include "fsl-lx2160a-cex7.dtsi"
+
+/ {
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&emdio2 {
+	status = "okay";
+};
+
+&esdhc0 {
+	sd-uhs-sdr104;
+	sd-uhs-sdr50;
+	sd-uhs-sdr25;
+	sd-uhs-sdr12;
+	status = "okay";
+};
+
+&sata0 {
+	status = "okay";
+};
+
+&sata1 {
+	status = "okay";
+};
+
+&sata2 {
+	status = "okay";
+};
+
+&sata3 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-honeycomb.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-honeycomb.dts
new file mode 100644
index 000000000000..fe19f3009ea5
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-honeycomb.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Device Tree file for LX2160A Honeycomb board
+//
+// Copyright 2019 SolidRun Ltd.
+
+/dts-v1/;
+
+#include "fsl-lx2160a-clearfog-itx.dtsi"
+
+/ {
+	model = "SolidRun LX2160A Honeycomb";
+	compatible = "solidrun,honeycomb",
+		"solidrun,lx2160a-cex7", "fsl,lx2160a";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
index c2817b784232..51615de102fe 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
@@ -35,6 +35,34 @@
 	status = "okay";
 };
 
+&dpmac17 {
+	phy-handle = <&rgmii_phy1>;
+	phy-connection-type = "rgmii-id";
+};
+
+&dpmac18 {
+	phy-handle = <&rgmii_phy2>;
+	phy-connection-type = "rgmii-id";
+};
+
+&emdio1 {
+	status = "okay";
+
+	rgmii_phy1: ethernet-phy@1 {
+		/* AR8035 PHY */
+		compatible = "ethernet-phy-id004d.d072";
+		reg = <0x1>;
+		eee-broken-1000t;
+	};
+
+	rgmii_phy2: ethernet-phy@2 {
+		/* AR8035 PHY */
+		compatible = "ethernet-phy-id004d.d072";
+		reg = <0x2>;
+		eee-broken-1000t;
+	};
+};
+
 &esdhc0 {
 	sd-uhs-sdr104;
 	sd-uhs-sdr50;
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index e883fe0fc1b7..e5ee5591e52b 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -939,6 +939,27 @@
 			fsl,extts-fifo;
 		};
 
+		/* WRIOP0: 0x8b8_0000, E-MDIO1: 0x1_6000 */
+		emdio1: mdio@8b96000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8b96000 0x0 0x1000>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			little-endian;
+			status = "disabled";
+		};
+
+		emdio2: mdio@8b97000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8b97000 0x0 0x1000>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		fsl_mc: fsl-mc@80c000000 {
 			compatible = "fsl,qoriq-mc";
 			reg = <0x00000008 0x0c000000 0 0x40>,
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
index 28ab17a277bb..9e54747cf4e6 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
@@ -16,6 +16,11 @@
 		stdout-path = &uart2;
 	};
 
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0x80000000>;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -77,6 +82,26 @@
 	cpu-supply = <&buck2_reg>;
 };
 
+&ddrc {
+	operating-points-v2 = <&ddrc_opp_table>;
+
+	ddrc_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-25M {
+			opp-hz = /bits/ 64 <25000000>;
+		};
+
+		opp-100M {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+
+		opp-750M {
+			opp-hz = /bits/ 64 <750000000>;
+		};
+	};
+};
+
 &fec1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_fec1>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h b/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h
index cffa8991880d..5ccc4cc91959 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h
+++ b/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h
@@ -430,18 +430,26 @@
 #define MX8MM_IOMUXC_SAI1_MCLK_SIM_M_HRESP                                  0x1AC 0x414 0x000 0x7 0x0
 #define MX8MM_IOMUXC_SAI2_RXFS_SAI2_RX_SYNC                                 0x1B0 0x418 0x000 0x0 0x0
 #define MX8MM_IOMUXC_SAI2_RXFS_SAI5_TX_SYNC                                 0x1B0 0x418 0x4EC 0x1 0x2
+#define MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX                                 0x1B0 0x418 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI2_RXFS_UART1_DTE_RX                                 0x1B0 0x418 0x4F4 0x4 0x2
 #define MX8MM_IOMUXC_SAI2_RXFS_GPIO4_IO21                                   0x1B0 0x418 0x000 0x5 0x0
 #define MX8MM_IOMUXC_SAI2_RXFS_SIM_M_HSIZE0                                 0x1B0 0x418 0x000 0x7 0x0
 #define MX8MM_IOMUXC_SAI2_RXC_SAI2_RX_BCLK                                  0x1B4 0x41C 0x000 0x0 0x0
 #define MX8MM_IOMUXC_SAI2_RXC_SAI5_TX_BCLK                                  0x1B4 0x41C 0x4E8 0x1 0x2
+#define MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX                                  0x1B4 0x41C 0x4F4 0x4 0x3
+#define MX8MM_IOMUXC_SAI2_RXC_UART1_DTE_TX                                  0x1B4 0x41C 0x000 0x4 0x0
 #define MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22                                    0x1B4 0x41C 0x000 0x5 0x0
 #define MX8MM_IOMUXC_SAI2_RXC_SIM_M_HSIZE1                                  0x1B4 0x41C 0x000 0x7 0x0
 #define MX8MM_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0                                0x1B8 0x420 0x000 0x0 0x0
 #define MX8MM_IOMUXC_SAI2_RXD0_SAI5_TX_DATA0                                0x1B8 0x420 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B                              0x1B8 0x420 0x4F0 0x4 0x2
+#define MX8MM_IOMUXC_SAI2_RXD0_UART1_DTE_CTS_B                              0x1B8 0x420 0x000 0x4 0x0
 #define MX8MM_IOMUXC_SAI2_RXD0_GPIO4_IO23                                   0x1B8 0x420 0x000 0x5 0x0
 #define MX8MM_IOMUXC_SAI2_RXD0_SIM_M_HSIZE2                                 0x1B8 0x420 0x000 0x7 0x0
 #define MX8MM_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC                                 0x1BC 0x424 0x000 0x0 0x0
 #define MX8MM_IOMUXC_SAI2_TXFS_SAI5_TX_DATA1                                0x1BC 0x424 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B                              0x1BC 0x424 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI2_TXFS_UART1_DTE_RTS_B                              0x1BC 0x424 0x4F0 0x4 0x3
 #define MX8MM_IOMUXC_SAI2_TXFS_GPIO4_IO24                                   0x1BC 0x424 0x000 0x5 0x0
 #define MX8MM_IOMUXC_SAI2_TXFS_SIM_M_HWRITE                                 0x1BC 0x424 0x000 0x7 0x0
 #define MX8MM_IOMUXC_SAI2_TXC_SAI2_TX_BCLK                                  0x1C0 0x428 0x000 0x0 0x0
@@ -464,21 +472,29 @@
 #define MX8MM_IOMUXC_SAI3_RXC_SAI3_RX_BCLK                                  0x1D0 0x438 0x000 0x0 0x0
 #define MX8MM_IOMUXC_SAI3_RXC_GPT1_CLK                                      0x1D0 0x438 0x000 0x1 0x0
 #define MX8MM_IOMUXC_SAI3_RXC_SAI5_RX_BCLK                                  0x1D0 0x438 0x4D0 0x2 0x2
+#define MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B                               0x1D0 0x438 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI3_RXC_UART2_DTE_RTS_B                               0x1D0 0x438 0x4F8 0x4 0x2
 #define MX8MM_IOMUXC_SAI3_RXC_GPIO4_IO29                                    0x1D0 0x438 0x000 0x5 0x0
 #define MX8MM_IOMUXC_SAI3_RXC_TPSMP_HTRANS1                                 0x1D0 0x438 0x000 0x7 0x0
 #define MX8MM_IOMUXC_SAI3_RXD_SAI3_RX_DATA0                                 0x1D4 0x43C 0x000 0x0 0x0
 #define MX8MM_IOMUXC_SAI3_RXD_GPT1_COMPARE1                                 0x1D4 0x43C 0x000 0x1 0x0
 #define MX8MM_IOMUXC_SAI3_RXD_SAI5_RX_DATA0                                 0x1D4 0x43C 0x4D4 0x2 0x2
+#define MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B                               0x1D4 0x43C 0x4F8 0x4 0x3
+#define MX8MM_IOMUXC_SAI3_RXD_UART2_DTE_CTS_B                               0x1D4 0x43C 0x000 0x4 0x0
 #define MX8MM_IOMUXC_SAI3_RXD_GPIO4_IO30                                    0x1D4 0x43C 0x000 0x5 0x0
 #define MX8MM_IOMUXC_SAI3_RXD_TPSMP_HDATA0                                  0x1D4 0x43C 0x000 0x7 0x0
 #define MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC                                 0x1D8 0x440 0x000 0x0 0x0
 #define MX8MM_IOMUXC_SAI3_TXFS_GPT1_CAPTURE2                                0x1D8 0x440 0x000 0x1 0x0
 #define MX8MM_IOMUXC_SAI3_TXFS_SAI5_RX_DATA1                                0x1D8 0x440 0x4D8 0x2 0x2
+#define MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX                                 0x1D8 0x440 0x4Fc 0x4 0x2
+#define MX8MM_IOMUXC_SAI3_TXFS_UART2_DTE_TX                                 0x1D8 0x440 0x000 0x4 0x0
 #define MX8MM_IOMUXC_SAI3_TXFS_GPIO4_IO31                                   0x1D8 0x440 0x000 0x5 0x0
 #define MX8MM_IOMUXC_SAI3_TXFS_TPSMP_HDATA1                                 0x1D8 0x440 0x000 0x7 0x0
 #define MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK                                  0x1DC 0x444 0x000 0x0 0x0
 #define MX8MM_IOMUXC_SAI3_TXC_GPT1_COMPARE2                                 0x1DC 0x444 0x000 0x1 0x0
 #define MX8MM_IOMUXC_SAI3_TXC_SAI5_RX_DATA2                                 0x1DC 0x444 0x4DC 0x2 0x2
+#define MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX                                  0x1DC 0x444 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI3_TXC_UART2_DTE_RX                                  0x1DC 0x444 0x4Fc 0x4 0x3
 #define MX8MM_IOMUXC_SAI3_TXC_GPIO5_IO0                                     0x1DC 0x444 0x000 0x5 0x0
 #define MX8MM_IOMUXC_SAI3_TXC_TPSMP_HDATA2                                  0x1DC 0x444 0x000 0x7 0x0
 #define MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0                                 0x1E0 0x448 0x000 0x0 0x0
diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index 3d95b66a2d71..1e5e11592f7b 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -140,11 +140,6 @@
 		};
 	};
 
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x0 0x40000000 0 0x80000000>;
-	};
-
 	osc_32k: clock-osc-32k {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -232,7 +227,7 @@
 		ranges = <0x0 0x0 0x0 0x3e000000>;
 
 		aips1: bus@30000000 {
-			compatible = "fsl,aips-bus", "simple-bus";
+			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x30000000 0x30000000 0x400000>;
@@ -438,7 +433,7 @@
 			};
 
 			anatop: anatop@30360000 {
-				compatible = "fsl,imx8mm-anatop", "syscon", "simple-bus";
+				compatible = "fsl,imx8mm-anatop", "syscon";
 				reg = <0x30360000 0x10000>;
 			};
 
@@ -501,7 +496,7 @@
 		};
 
 		aips2: bus@30400000 {
-			compatible = "fsl,aips-bus", "simple-bus";
+			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x30400000 0x30400000 0x400000>;
@@ -560,7 +555,7 @@
 		};
 
 		aips3: bus@30800000 {
-			compatible = "fsl,aips-bus", "simple-bus";
+			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x30800000 0x30800000 0x400000>;
@@ -641,6 +636,36 @@
 				status = "disabled";
 			};
 
+			crypto: crypto@30900000 {
+				compatible = "fsl,sec-v4.0";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x30900000 0x40000>;
+				ranges = <0 0x30900000 0x40000>;
+				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_AHB>,
+					 <&clk IMX8MM_CLK_IPG_ROOT>;
+				clock-names = "aclk", "ipg";
+
+				sec_jr0: jr@1000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x1000 0x1000>;
+					interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr1: jr@2000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x2000 0x1000>;
+					interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr2: jr@3000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x3000 0x1000>;
+					interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+				};
+			};
+
 			i2c1: i2c@30a20000 {
 				compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c";
 				#address-cells = <1>;
@@ -775,7 +800,7 @@
 		};
 
 		aips4: bus@32c00000 {
-			compatible = "fsl,aips-bus", "simple-bus";
+			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x32c00000 0x32c00000 0x400000>;
@@ -858,6 +883,16 @@
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		ddrc: memory-controller@3d400000 {
+			compatible = "fsl,imx8mm-ddrc", "fsl,imx8m-ddrc";
+			reg = <0x3d400000 0x400000>;
+			clock-names = "core", "pll", "alt", "apb";
+			clocks = <&clk IMX8MM_CLK_DRAM_CORE>,
+				 <&clk IMX8MM_DRAM_PLL>,
+				 <&clk IMX8MM_CLK_DRAM_ALT>,
+				 <&clk IMX8MM_CLK_DRAM_APB>;
+		};
+
 		ddr-pmu@3d800000 {
 			compatible = "fsl,imx8mm-ddr-pmu", "fsl,imx8m-ddr-pmu";
 			reg = <0x3d800000 0x400000>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
index 071949412caf..2497eebb5739 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
@@ -17,6 +17,26 @@
 	cpu-supply = <&buck2_reg>;
 };
 
+&ddrc {
+	operating-points-v2 = <&ddrc_opp_table>;
+
+	ddrc_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-25M {
+			opp-hz = /bits/ 64 <25000000>;
+		};
+
+		opp-100M {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+
+		opp-600M {
+			opp-hz = /bits/ 64 <600000000>;
+		};
+	};
+};
+
 &i2c1 {
 	pmic@4b {
 		compatible = "rohm,bd71847";
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
index 2a74330aee8c..0d2ec4a2c7f2 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
@@ -3,6 +3,7 @@
  * Copyright 2019 NXP
  */
 
+#include <dt-bindings/usb/pd.h>
 #include "imx8mn.dtsi"
 
 / {
@@ -22,6 +23,11 @@
 		};
 	};
 
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0x80000000>;
+	};
+
 	reg_usdhc2_vmmc: regulator-usdhc2 {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
@@ -60,6 +66,42 @@
 	status = "okay";
 };
 
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	ptn5110: tcpc@50 {
+		compatible = "nxp,ptn5110";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_typec1>;
+		reg = <0x50>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		status = "okay";
+
+		port {
+			typec1_dr_sw: endpoint {
+				remote-endpoint = <&usb1_drd_sw>;
+			};
+		};
+
+		typec1_con: connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "dual";
+			data-role = "dual";
+			try-power-role = "sink";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+				     PDO_VAR(5000, 20000, 3000)>;
+			op-sink-microwatt = <15000000>;
+			self-powered;
+		};
+	};
+};
+
 &snvs_pwrkey {
 	status = "okay";
 };
@@ -70,6 +112,21 @@
 	status = "okay";
 };
 
+&usbotg1 {
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	usb-role-switch;
+	status = "okay";
+
+	port {
+		usb1_drd_sw: endpoint {
+			remote-endpoint = <&typec1_dr_sw>;
+		};
+	};
+};
+
 &usdhc2 {
 	assigned-clocks = <&clk IMX8MN_CLK_USDHC2>;
 	assigned-clock-rates = <200000000>;
@@ -138,12 +195,25 @@
 		>;
 	};
 
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
+			MX8MN_IOMUXC_I2C2_SDA_I2C2_SDA		0x400001c3
+		>;
+	};
+
 	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmc {
 		fsl,pins = <
 			MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x41
 		>;
 	};
 
+	pinctrl_typec1: typec1grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD1_STROBE_GPIO2_IO11	0x159
+		>;
+	};
+
 	pinctrl_uart2: uart2grp {
 		fsl,pins = <
 			MX8MN_IOMUXC_UART2_RXD_UART2_DCE_RX	0x140
diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index e91625063f8e..a44b5438e842 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -139,11 +139,6 @@
 		};
 	};
 
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x0 0x40000000 0 0x80000000>;
-	};
-
 	osc_32k: clock-osc-32k {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -208,7 +203,7 @@
 		ranges = <0x0 0x0 0x0 0x3e000000>;
 
 		aips1: bus@30000000 {
-			compatible = "fsl,aips-bus", "simple-bus";
+			compatible = "simple-bus";
 			reg = <0x30000000 0x400000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -349,7 +344,7 @@
 
 			anatop: anatop@30360000 {
 				compatible = "fsl,imx8mn-anatop", "fsl,imx8mm-anatop",
-					     "syscon", "simple-bus";
+					     "syscon";
 				reg = <0x30360000 0x10000>;
 			};
 
@@ -395,7 +390,7 @@
 		};
 
 		aips2: bus@30400000 {
-			compatible = "fsl,aips-bus", "simple-bus";
+			compatible = "simple-bus";
 			reg = <0x30400000 0x400000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -455,7 +450,7 @@
 		};
 
 		aips3: bus@30800000 {
-			compatible = "fsl,aips-bus", "simple-bus";
+			compatible = "simple-bus";
 			reg = <0x30800000 0x400000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -537,6 +532,36 @@
 				status = "disabled";
 			};
 
+			crypto: crypto@30900000 {
+				compatible = "fsl,sec-v4.0";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x30900000 0x40000>;
+				ranges = <0 0x30900000 0x40000>;
+				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_AHB>,
+					 <&clk IMX8MN_CLK_IPG_ROOT>;
+				clock-names = "aclk", "ipg";
+
+				sec_jr0: jr0@1000 {
+					 compatible = "fsl,sec-v4.0-job-ring";
+					 reg = <0x1000 0x1000>;
+					 interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr1: jr1@2000 {
+					 compatible = "fsl,sec-v4.0-job-ring";
+					 reg = <0x2000 0x1000>;
+					 interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr2: jr2@3000 {
+					 compatible = "fsl,sec-v4.0-job-ring";
+					 reg = <0x3000 0x1000>;
+					 interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+				};
+			};
+
 			i2c1: i2c@30a20000 {
 				compatible = "fsl,imx8mn-i2c", "fsl,imx21-i2c";
 				#address-cells = <1>;
@@ -671,7 +696,7 @@
 		};
 
 		aips4: bus@32c00000 {
-			compatible = "fsl,aips-bus", "simple-bus";
+			compatible = "simple-bus";
 			reg = <0x32c00000 0x400000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -683,10 +708,8 @@
 				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MN_CLK_USB1_CTRL_ROOT>;
 				clock-names = "usb1_ctrl_root_clk";
-				assigned-clocks = <&clk IMX8MN_CLK_USB_BUS>,
-						  <&clk IMX8MN_CLK_USB_CORE_REF>;
-				assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_500M>,
-							 <&clk IMX8MN_SYS_PLL1_100M>;
+				assigned-clocks = <&clk IMX8MN_CLK_USB_BUS>;
+				assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_500M>;
 				fsl,usbphy = <&usbphynop1>;
 				fsl,usbmisc = <&usbmisc1 0>;
 				status = "disabled";
@@ -759,6 +782,16 @@
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		ddrc: memory-controller@3d400000 {
+			compatible = "fsl,imx8mn-ddrc", "fsl,imx8m-ddrc";
+			reg = <0x3d400000 0x400000>;
+			clock-names = "core", "pll", "alt", "apb";
+			clocks = <&clk IMX8MN_CLK_DRAM_CORE>,
+				 <&clk IMX8MN_DRAM_PLL>,
+				 <&clk IMX8MN_CLK_DRAM_ALT>,
+				 <&clk IMX8MN_CLK_DRAM_APB>;
+		};
+
 		ddr-pmu@3d800000 {
 			compatible = "fsl,imx8mn-ddr-pmu", "fsl,imx8m-ddr-pmu";
 			reg = <0x3d800000 0x400000>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
index c36685916683..94066d49d6ed 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
@@ -105,6 +105,33 @@
 	cpu-supply = <&buck2_reg>;
 };
 
+&ddrc {
+	operating-points-v2 = <&ddrc_opp_table>;
+
+	ddrc_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-25M {
+			opp-hz = /bits/ 64 <25000000>;
+		};
+
+		opp-100M {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+
+		/*
+		 * On imx8mq B0 PLL can't be bypassed so low bus is 166M
+		 */
+		opp-166M {
+			opp-hz = /bits/ 64 <166935483>;
+		};
+
+		opp-800M {
+			opp-hz = /bits/ 64 <800000000>;
+		};
+	};
+};
+
 &fec1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_fec1>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-hummingboard-pulse.dts b/arch/arm64/boot/dts/freescale/imx8mq-hummingboard-pulse.dts
index b8cb20c01a79..bfd91c1ed6a5 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-hummingboard-pulse.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-hummingboard-pulse.dts
@@ -84,6 +84,12 @@
 	clock-frequency = <100000>;
 	status = "okay";
 
+	eeprom@57 {
+		compatible = "atmel,24c02";
+		reg = <0x57>;
+		status = "okay";
+	};
+
 	rtc@69 {
 		compatible = "abracon,ab1805";
 		reg = <0x69>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
index 596bc65f475c..764a4cb4e125 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
@@ -440,6 +440,13 @@
 		AVDD28-supply = <&reg_2v8_p>;
 		VDDIO-supply = <&reg_1v8_p>;
 	};
+
+	accel-gyro@6a {
+		compatible = "st,lsm9ds1-imu";
+		reg = <0x6a>;
+		vdd-supply = <&reg_3v3_p>;
+		vddio-supply = <&reg_3v3_p>;
+	};
 };
 
 &iomuxc {
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts b/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts
new file mode 100644
index 000000000000..3f2a489a4ad8
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts
@@ -0,0 +1,376 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2017-2019 NXP
+ */
+
+/dts-v1/;
+
+#include "imx8mq.dtsi"
+
+/ {
+	model = "Google i.MX8MQ Phanbell";
+	compatible = "google,imx8mq-phanbell", "fsl,imx8mq";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000 0 0x40000000>;
+	};
+
+	pmic_osc: clock-pmic {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "pmic_osc";
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2>;
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic: pmic@4b {
+		compatible = "rohm,bd71837";
+		reg = <0x4b>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		#clock-cells = <0>;
+		clocks = <&pmic_osc>;
+		clock-output-names = "pmic_clk";
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 GPIO_ACTIVE_LOW>;
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-name = "buck1";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+				rohm,dvs-run-voltage = <900000>;
+				rohm,dvs-idle-voltage = <900000>;
+				rohm,dvs-suspend-voltage = <800000>;
+			};
+
+			buck2: BUCK2 {
+				regulator-name = "buck2";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-boot-on;
+				regulator-always-on;
+				rohm,dvs-run-voltage = <1000000>;
+				rohm,dvs-idle-voltage = <900000>;
+			};
+
+			buck3: BUCK3 {
+				regulator-name = "buck3";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				rohm,dvs-run-voltage = <900000>;
+			};
+
+			buck4: BUCK4 {
+				regulator-name = "buck4";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				rohm,dvs-run-voltage = <900000>;
+			};
+
+			buck5: BUCK5 {
+				regulator-name = "buck5";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6: BUCK6 {
+				regulator-name = "buck6";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck7: BUCK7 {
+				regulator-name = "buck7";
+				regulator-min-microvolt = <1605000>;
+				regulator-max-microvolt = <1995000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck8: BUCK8 {
+				regulator-name = "buck8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1: LDO1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2: LDO2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3: LDO3 {
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4: LDO4 {
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5: LDO5 {
+				regulator-name = "ldo5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo6: LDO6 {
+				regulator-name = "ldo6";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo7: LDO7 {
+				regulator-name = "ldo7";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL			0x4000007f
+			MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA			0x4000007f
+		>;
+	};
+
+	pinctrl_pmic: pmicirq {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO03_GPIO1_IO3	0x41
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX		0x49
+			MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX		0x49
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x83
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xc3
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xc3
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xc3
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xc3
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xc3
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xc3
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xc3
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xc3
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xc3
+			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x83
+			MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0xc1
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x85
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xc5
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xc5
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xc5
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xc5
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xc5
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xc5
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xc5
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xc5
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xc5
+			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x85
+			MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0xc1
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x87
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xc7
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xc7
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xc7
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xc7
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xc7
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xc7
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xc7
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xc7
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xc7
+			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x87
+			MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2grpgpio {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12	0x41
+			MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x41
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x83
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xc3
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xc3
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xc3
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xc3
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xc3
+			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x85
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xc5
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xc5
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xc5
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xc5
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xc5
+			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x87
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xc7
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xc7
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xc7
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xc7
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xc7
+			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-sr-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-sr-som.dtsi
index 3dc44114da0e..602c870a7ccb 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-sr-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-sr-som.dtsi
@@ -125,6 +125,12 @@
 			};
 		};
 	};
+
+	eeprom@50 {
+		compatible = "atmel,24c01";
+		reg = <0x50>;
+		status = "okay";
+	};
 };
 
 &pgc_gpu{
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts b/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts
new file mode 100644
index 000000000000..b4795a032fa2
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts
@@ -0,0 +1,581 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 Einfochips
+ * Copyright 2019 Linaro Ltd.
+ */
+
+/dts-v1/;
+
+#include "imx8mq.dtsi"
+
+/ {
+	model = "Einfochips i.MX8MQ Thor96";
+	compatible = "einfochips,imx8mq-thor96", "fsl,imx8mq";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000 0 0x80000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		user-led1 {
+			label = "green:user1";
+			gpios = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		user-led2 {
+			label = "green:user2";
+			gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "none";
+		};
+
+		user-led3 {
+			label = "green:user3";
+			gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc1";
+			default-state = "off";
+		};
+
+		user-led4 {
+			label = "green:user4";
+			gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+			panic-indicator;
+			linux,default-trigger = "none";
+		};
+
+		wlan-active-led {
+			label = "yellow:wlan";
+			gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
+		};
+
+		bt-active-led {
+			label = "blue:bt";
+			gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "hci0-power";
+			default-state = "off";
+		};
+	};
+
+	reg_usdhc1_vmmc: reg-usdhc1-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usdhc1_vqmmc: reg-usdhc1-vqmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8_EXT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_usdhc2_vmmc: reg-usdhc2-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usdhc2_vqmmc: reg-usdhc2-vqmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "NVCC_SD2";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_reg_on>;
+		gpio = <&gpio3 3 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+/* LS-SPI0 */
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+	phy-handle = <&ethphy>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@3 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <3>;
+		};
+	};
+};
+
+/* LS-I2C0 */
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x8>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3ab {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+};
+
+/* LS-I2C1 */
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+	};
+};
+
+/* HS-I2C2 */
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+/* HS-I2C3 */
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+};
+
+&pgc_gpu {
+	power-supply = <&sw1a_reg>;
+};
+
+&pgc_vpu {
+	power-supply = <&sw1c_reg>;
+};
+
+&qspi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi0>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <100000000>;
+		reg = <0>;
+	};
+};
+
+/* Debug UART */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clk IMX8MQ_CLK_UART1>;
+	assigned-clock-parents = <&clk IMX8MQ_CLK_25M>;
+	status = "okay";
+};
+
+/* LS-UART0 */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	assigned-clocks = <&clk IMX8MQ_CLK_UART2>;
+	assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		device-wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio3 5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_bt_gpios>;
+	};
+};
+
+/* LS-UART1 */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	assigned-clocks = <&clk IMX8MQ_CLK_UART3>;
+	assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>;
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+/* SDIO */
+&usdhc1 {
+	#address-cells = <0x1>;
+	#size-cells = <0x0>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	vmmc-supply = <&reg_usdhc1_vmmc>;
+	vqmmc-supply = <&reg_usdhc1_vqmmc>;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	no-sd;
+	no-emmc;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* uSD */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	vqmmc-supply = <&reg_usdhc2_vqmmc>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	no-sdio;
+	no-emmc;
+	disable-wp;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_bt_gpios: btgpiosgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SAI5_RXD1_GPIO3_IO22		0x19
+			MX8MQ_IOMUXC_NAND_DQS_GPIO3_IO14		0x19
+			MX8MQ_IOMUXC_NAND_CLE_GPIO3_IO5			0x19
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK		0x16
+			MX8MQ_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI		0x16
+			MX8MQ_IOMUXC_ECSPI2_MISO_ECSPI2_MISO		0x16
+			MX8MQ_IOMUXC_ECSPI2_SS0_ECSPI2_SS0		0x16
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC			0x4
+			MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO		0x24
+			MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1c
+			MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1c
+			MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1c
+			MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1c
+			MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1c
+			MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1c
+			MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x19
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL			0x4000007f
+			MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA			0x4000007f
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL			0x4000007f
+			MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA			0x4000007f
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL			0x4000007f
+			MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA			0x4000007f
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C4_SCL_I2C4_SCL			0x4000007f
+			MX8MQ_IOMUXC_I2C4_SDA_I2C4_SDA			0x4000007f
+		>;
+	};
+
+	pinctrl_leds: ledsgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SAI2_RXFS_GPIO4_IO21		0x19
+			MX8MQ_IOMUXC_SAI2_RXC_GPIO4_IO22		0x19
+			MX8MQ_IOMUXC_SAI3_RXFS_GPIO4_IO28		0x19
+			MX8MQ_IOMUXC_SAI3_RXC_GPIO4_IO29		0x19
+			MX8MQ_IOMUXC_SAI1_RXC_GPIO4_IO1			0x19
+			MX8MQ_IOMUXC_SAI1_RXFS_GPIO4_IO0		0x19
+		>;
+	};
+
+	pinctrl_qspi0: qspi0grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_NAND_ALE_QSPI_A_SCLK		0x82
+			MX8MQ_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B		0x82
+			MX8MQ_IOMUXC_NAND_DATA00_QSPI_A_DATA0		0x82
+			MX8MQ_IOMUXC_NAND_DATA01_QSPI_A_DATA1		0x82
+			MX8MQ_IOMUXC_NAND_DATA02_QSPI_A_DATA2		0x82
+			MX8MQ_IOMUXC_NAND_DATA03_QSPI_A_DATA3		0x82
+
+		>;
+	};
+
+	pinctrl_reg_usdhc2: regusdhc2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19		0x41
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX		0x49
+			MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX		0x49
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX		0x49
+			MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX		0x49
+			MX8MQ_IOMUXC_UART4_RXD_UART2_DCE_CTS_B		0x49
+			MX8MQ_IOMUXC_UART4_TXD_UART2_DCE_RTS_B		0x49
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART3_TXD_UART3_DCE_TX		0x49
+			MX8MQ_IOMUXC_UART3_RXD_UART3_DCE_RX		0x49
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x83
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xc3
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xc3
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xc3
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xc3
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xc3
+			MX8MQ_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K	0x85
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x8d
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xcd
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xcd
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xcd
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xcd
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xcd
+			MX8MQ_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K	0x85
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x9f
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xdf
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xdf
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xdf
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xdf
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xdf
+			MX8MQ_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K	0x85
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12		0x41
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x83
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xc3
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xc3
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xc3
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xc3
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xc3
+			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x8c
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xcc
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xcc
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xcc
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xcc
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xcc
+			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x9c
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xdc
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xdc
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xdc
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xdc
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xdc
+			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xcc
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B		0xc6
+		>;
+	};
+
+	pinctrl_wifi_reg_on: wifiregongrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_NAND_CE2_B_GPIO3_IO3		0x17059
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts
index d2a6da479980..6b3581366d67 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts
@@ -8,7 +8,7 @@
 #include "imx8mq-zii-ultra.dtsi"
 
 / {
-	model = "ZII i.MX8MQ Ultra RMB3 Board";
+	model = "ZII Ultra RMB3 Board";
 	compatible = "zii,imx8mq-ultra-rmb3", "zii,imx8mq-ultra", "fsl,imx8mq";
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-zest.dts b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-zest.dts
index 1084d9330403..173b9e9b2bbd 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-zest.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-zest.dts
@@ -8,7 +8,7 @@
 #include "imx8mq-zii-ultra.dtsi"
 
 / {
-	model = "ZII i.MX8MQ Ultra Zest Board";
+	model = "ZII Ultra Zest Board";
 	compatible = "zii,imx8mq-ultra-zest", "zii,imx8mq-ultra", "fsl,imx8mq";
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 7f9319452b58..6a1e83922c71 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -290,11 +290,67 @@
 		dma-ranges = <0x40000000 0x0 0x40000000 0xc0000000>;
 
 		bus@30000000 { /* AIPS1 */
-			compatible = "fsl,imx8mq-aips-bus", "simple-bus";
+			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x30000000 0x30000000 0x400000>;
 
+			sai1: sai@30010000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx8mq-sai";
+				reg = <0x30010000 0x10000>;
+				interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_SAI1_IPG>,
+				         <&clk IMX8MQ_CLK_SAI1_ROOT>,
+				         <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dmas = <&sdma2 8 24 0>, <&sdma1 9 24 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			sai6: sai@30030000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx8mq-sai";
+				reg = <0x30030000 0x10000>;
+				interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_SAI6_IPG>,
+				         <&clk IMX8MQ_CLK_SAI6_ROOT>,
+				         <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dmas = <&sdma2 4 24 0>, <&sdma2 5 24 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			sai5: sai@30040000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx8mq-sai";
+				reg = <0x30040000 0x10000>;
+				interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_SAI5_IPG>,
+				         <&clk IMX8MQ_CLK_SAI5_ROOT>,
+				         <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dmas = <&sdma2 2 24 0>, <&sdma2 3 24 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			sai4: sai@30050000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx8mq-sai";
+				reg = <0x30050000 0x10000>;
+				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_SAI4_IPG>,
+				         <&clk IMX8MQ_CLK_SAI4_ROOT>,
+				         <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dmas = <&sdma2 0 24 0>, <&sdma2 1 24 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
 			gpio1: gpio@30200000 {
 				compatible = "fsl,imx8mq-gpio", "fsl,imx35-gpio";
 				reg = <0x30200000 0x10000>;
@@ -448,6 +504,23 @@
 				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
 			};
 
+			lcdif: lcd-controller@30320000 {
+				compatible = "fsl,imx8mq-lcdif", "fsl,imx28-lcdif";
+				reg = <0x30320000 0x10000>;
+				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_LCDIF_PIXEL>;
+				clock-names = "pix";
+				assigned-clocks = <&clk IMX8MQ_VIDEO_PLL1_REF_SEL>,
+						  <&clk IMX8MQ_VIDEO_PLL1_BYPASS>,
+						  <&clk IMX8MQ_CLK_LCDIF_PIXEL>,
+						  <&clk IMX8MQ_VIDEO_PLL1>;
+				assigned-clock-parents = <&clk IMX8MQ_CLK_25M>,
+						  <&clk IMX8MQ_VIDEO_PLL1>,
+						  <&clk IMX8MQ_VIDEO_PLL1_OUT>;
+				assigned-clock-rates = <0>, <0>, <0>, <594000000>;
+				status = "disabled";
+			};
+
 			iomuxc: iomuxc@30330000 {
 				compatible = "fsl,imx8mq-iomuxc";
 				reg = <0x30330000 0x10000>;
@@ -519,6 +592,8 @@
 				clock-names = "ckil", "osc_25m", "osc_27m",
 				              "clk_ext1", "clk_ext2",
 				              "clk_ext3", "clk_ext4";
+				assigned-clocks = <&clk IMX8MQ_CLK_NOC>;
+				assigned-clock-rates = <800000000>;
 			};
 
 			src: reset-controller@30390000 {
@@ -617,7 +692,7 @@
 		};
 
 		bus@30400000 { /* AIPS2 */
-			compatible = "fsl,imx8mq-aips-bus", "simple-bus";
+			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x30400000 0x30400000 0x400000>;
@@ -676,7 +751,7 @@
 		};
 
 		bus@30800000 { /* AIPS3 */
-			compatible = "fsl,imx8mq-aips-bus", "simple-bus";
+			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x30800000 0x30800000 0x400000>,
@@ -765,6 +840,20 @@
 				status = "disabled";
 			};
 
+			sai3: sai@308c0000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx8mq-sai";
+				reg = <0x308c0000 0x10000>;
+				interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_SAI3_IPG>,
+				         <&clk IMX8MQ_CLK_SAI3_ROOT>,
+				         <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dmas = <&sdma1 12 24 0>, <&sdma1 13 24 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
 			crypto: crypto@30900000 {
 				compatible = "fsl,sec-v4.0";
 				#address-cells = <1>;
@@ -934,7 +1023,7 @@
 		};
 
 		bus@32c00000 { /* AIPS4 */
-			compatible = "fsl,imx8mq-aips-bus", "simple-bus";
+			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x32c00000 0x32c00000 0x400000>;
@@ -1113,6 +1202,16 @@
 			interrupt-parent = <&gic>;
 		};
 
+		ddrc: memory-controller@3d400000 {
+			compatible = "fsl,imx8mq-ddrc", "fsl,imx8m-ddrc";
+			reg = <0x3d400000 0x400000>;
+			clock-names = "core", "pll", "alt", "apb";
+			clocks = <&clk IMX8MQ_CLK_DRAM_CORE>,
+				 <&clk IMX8MQ_DRAM_PLL_OUT>,
+				 <&clk IMX8MQ_CLK_DRAM_ALT>,
+				 <&clk IMX8MQ_CLK_DRAM_APB>;
+		};
+
 		ddr-pmu@3d800000 {
 			compatible = "fsl,imx8mq-ddr-pmu", "fsl,imx8m-ddr-pmu";
 			reg = <0x3d800000 0x400000>;
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
index 9646a41e0532..fb5f752b15fe 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
@@ -250,7 +250,6 @@
 			compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
 			reg = <0x5a060000 0x1000>;
 			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-parent = <&gic>;
 			clocks = <&adma_lpcg IMX_ADMA_LPCG_UART0_IPG_CLK>,
 				 <&adma_lpcg IMX_ADMA_LPCG_UART0_BAUD_CLK>;
 			clock-names = "ipg", "baud";
@@ -262,7 +261,6 @@
 			compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
 			reg = <0x5a070000 0x1000>;
 			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-parent = <&gic>;
 			clocks = <&adma_lpcg IMX_ADMA_LPCG_UART1_IPG_CLK>,
 				 <&adma_lpcg IMX_ADMA_LPCG_UART1_BAUD_CLK>;
 			clock-names = "ipg", "baud";
@@ -274,7 +272,6 @@
 			compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
 			reg = <0x5a080000 0x1000>;
 			interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-parent = <&gic>;
 			clocks = <&adma_lpcg IMX_ADMA_LPCG_UART2_IPG_CLK>,
 				 <&adma_lpcg IMX_ADMA_LPCG_UART2_BAUD_CLK>;
 			clock-names = "ipg", "baud";
@@ -286,7 +283,6 @@
 			compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
 			reg = <0x5a090000 0x1000>;
 			interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-parent = <&gic>;
 			clocks = <&adma_lpcg IMX_ADMA_LPCG_UART3_IPG_CLK>,
 				 <&adma_lpcg IMX_ADMA_LPCG_UART3_BAUD_CLK>;
 			clock-names = "ipg", "baud";
@@ -298,7 +294,6 @@
 			compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
 			reg = <0x5a800000 0x4000>;
 			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-parent = <&gic>;
 			clocks = <&adma_lpcg IMX_ADMA_LPCG_I2C0_CLK>;
 			clock-names = "per";
 			assigned-clocks = <&clk IMX_ADMA_I2C0_CLK>;
@@ -311,7 +306,6 @@
 			compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
 			reg = <0x5a810000 0x4000>;
 			interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-parent = <&gic>;
 			clocks = <&adma_lpcg IMX_ADMA_LPCG_I2C1_CLK>;
 			clock-names = "per";
 			assigned-clocks = <&clk IMX_ADMA_I2C1_CLK>;
@@ -324,7 +318,6 @@
 			compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
 			reg = <0x5a820000 0x4000>;
 			interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-parent = <&gic>;
 			clocks = <&adma_lpcg IMX_ADMA_LPCG_I2C2_CLK>;
 			clock-names = "per";
 			assigned-clocks = <&clk IMX_ADMA_I2C2_CLK>;
@@ -337,7 +330,6 @@
 			compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
 			reg = <0x5a830000 0x4000>;
 			interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-parent = <&gic>;
 			clocks = <&adma_lpcg IMX_ADMA_LPCG_I2C3_CLK>;
 			clock-names = "per";
 			assigned-clocks = <&clk IMX_ADMA_I2C3_CLK>;
@@ -361,7 +353,6 @@
 
 		usdhc1: mmc@5b010000 {
 			compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
-			interrupt-parent = <&gic>;
 			interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0x5b010000 0x10000>;
 			clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC0_IPG_CLK>,
@@ -374,7 +365,6 @@
 
 		usdhc2: mmc@5b020000 {
 			compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
-			interrupt-parent = <&gic>;
 			interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0x5b020000 0x10000>;
 			clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC1_IPG_CLK>,
@@ -389,7 +379,6 @@
 
 		usdhc3: mmc@5b030000 {
 			compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
-			interrupt-parent = <&gic>;
 			interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0x5b030000 0x10000>;
 			clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC2_IPG_CLK>,
@@ -446,7 +435,6 @@
 		ddr-pmu@5c020000 {
 			compatible = "fsl,imx8-ddr-pmu";
 			reg = <0x5c020000 0x10000>;
-			interrupt-parent = <&gic>;
 			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
 		};
 	};
diff --git a/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts b/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts
index c563d3eb2d98..7d370dac4c85 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts
@@ -170,6 +170,7 @@
 };
 
 &ir {
+	linux,rc-map-name = "rc-hisi-poplar";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
index 13821a0ff524..12bc1d3ed424 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
@@ -564,7 +564,7 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
-			bus-range = <0 15>;
+			bus-range = <0x00 0xff>;
 			num-lanes = <1>;
 			ranges = <0x81000000 0x0 0x00000000 0x4f00000 0x0 0x100000
 				  0x82000000 0x0 0x3000000 0x3000000 0x0 0x01f00000>;
diff --git a/arch/arm64/boot/dts/intel/Makefile b/arch/arm64/boot/dts/intel/Makefile
index 1253af30da8e..40cb16e8c814 100644
--- a/arch/arm64/boot/dts/intel/Makefile
+++ b/arch/arm64/boot/dts/intel/Makefile
@@ -1,2 +1,3 @@
 # SPDX-License-Identifier: GPL-2.0-only
-dtb-$(CONFIG_ARCH_AGILEX) += socfpga_agilex_socdk.dtb
+dtb-$(CONFIG_ARCH_AGILEX) += socfpga_agilex_socdk.dtb \
+			     socfpga_agilex_socdk_nand.dtb
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
index d43e1299c8ef..e1d357eaad7c 100644
--- a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
@@ -113,6 +113,7 @@
 			rx-fifo-depth = <16384>;
 			snps,multicast-filter-bins = <256>;
 			iommus = <&smmu 1>;
+			altr,sysmgr-syscon = <&sysmgr 0x44 0>;
 			status = "disabled";
 		};
 
@@ -128,6 +129,7 @@
 			rx-fifo-depth = <16384>;
 			snps,multicast-filter-bins = <256>;
 			iommus = <&smmu 2>;
+			altr,sysmgr-syscon = <&sysmgr 0x48 8>;
 			status = "disabled";
 		};
 
@@ -143,6 +145,7 @@
 			rx-fifo-depth = <16384>;
 			snps,multicast-filter-bins = <256>;
 			iommus = <&smmu 3>;
+			altr,sysmgr-syscon = <&sysmgr 0x4c 16>;
 			status = "disabled";
 		};
 
@@ -249,6 +252,18 @@
 			status = "disabled";
 		};
 
+		nand: nand@ffb90000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "altr,socfpga-denali-nand";
+			reg = <0xffb90000 0x10000>,
+			      <0xffb80000 0x1000>;
+			reg-names = "nand_data", "denali_reg";
+			interrupts = <0 97 4>;
+			resets = <&rst NAND_RESET>, <&rst NAND_OCP_RESET>;
+			status = "disabled";
+		};
+
 		ocram: sram@ffe00000 {
 			compatible = "mmio-sram";
 			reg = <0xffe00000 0x40000>;
@@ -325,7 +340,7 @@
 		};
 
 		sysmgr: sysmgr@ffd12000 {
-			compatible = "altr,sys-mgr", "syscon";
+			compatible = "altr,sys-mgr-s10","altr,sys-mgr";
 			reg = <0xffd12000 0x500>;
 		};
 
@@ -449,6 +464,65 @@
 			reg = <0xf8011100 0xc0>;
 		};
 
+		eccmgr {
+			compatible = "altr,socfpga-s10-ecc-manager",
+				     "altr,socfpga-a10-ecc-manager";
+			altr,sysmgr-syscon = <&sysmgr>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			interrupts = <0 15 4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			ranges;
+
+			sdramedac {
+				compatible = "altr,sdram-edac-s10";
+				altr,sdr-syscon = <&sdr>;
+				interrupts = <16 4>;
+			};
+
+			ocram-ecc@ff8cc000 {
+				compatible = "altr,socfpga-s10-ocram-ecc",
+					     "altr,socfpga-a10-ocram-ecc";
+				reg = <0xff8cc000 0x100>;
+				altr,ecc-parent = <&ocram>;
+				interrupts = <1 4>;
+			};
+
+			usb0-ecc@ff8c4000 {
+				compatible = "altr,socfpga-s10-usb-ecc",
+					     "altr,socfpga-usb-ecc";
+				reg = <0xff8c4000 0x100>;
+				altr,ecc-parent = <&usb0>;
+				interrupts = <2 4>;
+			};
+
+			emac0-rx-ecc@ff8c0000 {
+				compatible = "altr,socfpga-s10-eth-mac-ecc",
+					     "altr,socfpga-eth-mac-ecc";
+				reg = <0xff8c0000 0x100>;
+				altr,ecc-parent = <&gmac0>;
+				interrupts = <4 4>;
+			};
+
+			emac0-tx-ecc@ff8c0400 {
+				compatible = "altr,socfpga-s10-eth-mac-ecc",
+					     "altr,socfpga-eth-mac-ecc";
+				reg = <0xff8c0400 0x100>;
+				altr,ecc-parent = <&gmac0>;
+				interrupts = <5 4>;
+			};
+
+			sdmmca-ecc@ff8c8c00 {
+				compatible = "altr,socfpga-s10-sdmmc-ecc",
+					     "altr,socfpga-sdmmc-ecc";
+				reg = <0xff8c8c00 0x100>;
+				altr,ecc-parent = <&mmc>;
+				interrupts = <14 4>,
+					     <15 4>;
+			};
+		};
+
 		qspi: spi@ff8d2000 {
 			compatible = "cdns,qspi-nor";
 			#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk_nand.dts b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk_nand.dts
new file mode 100644
index 000000000000..979aa59a6bd0
--- /dev/null
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk_nand.dts
@@ -0,0 +1,135 @@
+// SPDX-License-Identifier:     GPL-2.0
+/*
+ * Copyright (C) 2019, Intel Corporation
+ */
+#include "socfpga_agilex.dtsi"
+
+/ {
+	model = "SoCFPGA Agilex SoCDK";
+
+	aliases {
+		serial0 = &uart0;
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+		ethernet2 = &gmac2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		hps0 {
+			label = "hps_led0";
+			gpios = <&portb 20 GPIO_ACTIVE_HIGH>;
+		};
+
+		hps1 {
+			label = "hps_led1";
+			gpios = <&portb 19 GPIO_ACTIVE_HIGH>;
+		};
+
+		hps2 {
+			label = "hps_led2";
+			gpios = <&portb 21 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the reg */
+		reg = <0 0 0 0>;
+	};
+
+	soc {
+		clocks {
+			osc1 {
+				clock-frequency = <25000000>;
+			};
+		};
+	};
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gmac2 {
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-handle = <&phy0>;
+
+	max-frame-size = <9000>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy0: ethernet-phy@0 {
+			reg = <4>;
+
+			txd0-skew-ps = <0>; /* -420ps */
+			txd1-skew-ps = <0>; /* -420ps */
+			txd2-skew-ps = <0>; /* -420ps */
+			txd3-skew-ps = <0>; /* -420ps */
+			rxd0-skew-ps = <420>; /* 0ps */
+			rxd1-skew-ps = <420>; /* 0ps */
+			rxd2-skew-ps = <420>; /* 0ps */
+			rxd3-skew-ps = <420>; /* 0ps */
+			txen-skew-ps = <0>; /* -420ps */
+			txc-skew-ps = <900>; /* 0ps */
+			rxdv-skew-ps = <420>; /* 0ps */
+			rxc-skew-ps = <1680>; /* 780ps */
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		nand-bus-width = <16>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0 0x200000>;
+		};
+		partition@200000 {
+			label = "env";
+			reg = <0x200000 0x40000>;
+		};
+		partition@240000 {
+			label = "dtb";
+			reg = <0x240000 0x40000>;
+		};
+		partition@280000 {
+			label = "kernel";
+			reg = <0x280000 0x2000000>;
+		};
+		partition@2280000 {
+			label = "misc";
+			reg = <0x2280000 0x2000000>;
+		};
+		partition@4280000 {
+			label = "rootfs";
+			reg = <0x4280000 0x3bd80000>;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	disable-over-current;
+};
+
+&watchdog0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
index bd4aab6092e0..7eb6c1796cef 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
@@ -69,6 +69,7 @@
 		mod-def0-gpio = <&gpiosb 3 GPIO_ACTIVE_LOW>;
 		tx-disable-gpio = <&gpiosb 4 GPIO_ACTIVE_HIGH>;
 		tx-fault-gpio = <&gpiosb 5 GPIO_ACTIVE_HIGH>;
+		maximum-power-milliwatt = <3000>;
 	};
 
 	sfp_eth1: sfp-eth1 {
@@ -78,6 +79,7 @@
 		mod-def0-gpio = <&gpiosb 8 GPIO_ACTIVE_LOW>;
 		tx-disable-gpio = <&gpiosb 9 GPIO_ACTIVE_HIGH>;
 		tx-fault-gpio = <&gpiosb 10 GPIO_ACTIVE_HIGH>;
+		maximum-power-milliwatt = <3000>;
 	};
 };
 
@@ -119,12 +121,14 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c1_pins>;
+	/delete-property/mrvl,i2c-fast-mode;
 };
 
 &i2c1 {
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c2_pins>;
+	/delete-property/mrvl,i2c-fast-mode;
 
 	lm75@48 {
 		status = "okay";
@@ -143,6 +147,7 @@
 	phy-mode = "sgmii";
 	status = "okay";
 	managed = "in-band-status";
+	phys = <&comphy1 0>;
 	sfp = <&sfp_eth0>;
 };
 
@@ -150,11 +155,14 @@
 	phy-mode = "sgmii";
 	status = "okay";
 	managed = "in-band-status";
+	phys = <&comphy0 1>;
 	sfp = <&sfp_eth1>;
 };
 
 &usb3 {
 	status = "okay";
+	phys = <&usb2_utmi_otg_phy>;
+	phy-names = "usb2-utmi-otg-phy";
 };
 
 &uart0 {
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
index bd881497b872..a211a046b2f2 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
@@ -408,6 +408,8 @@
 				reg = <5>;
 				label = "cpu";
 				ethernet = <&cp1_eth2>;
+				phy-mode = "2500base-x";
+				managed = "in-band-status";
 			};
 		};
 
diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index 15f1842f6df3..8b4e806d5119 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -157,6 +157,7 @@
 			enable-method = "psci";
 			cpu-idle-states = <&CPU_SLEEP_0>;
 			#cooling-cells = <2>;
+			dynamic-power-coefficient = <263>;
 			clocks = <&infracfg CLK_INFRA_CA53SEL>,
 				 <&apmixedsys CLK_APMIXED_MAINPLL>;
 			clock-names = "cpu", "intermediate";
@@ -170,6 +171,7 @@
 			enable-method = "psci";
 			cpu-idle-states = <&CPU_SLEEP_0>;
 			#cooling-cells = <2>;
+			dynamic-power-coefficient = <263>;
 			clocks = <&infracfg CLK_INFRA_CA53SEL>,
 				 <&apmixedsys CLK_APMIXED_MAINPLL>;
 			clock-names = "cpu", "intermediate";
@@ -183,6 +185,7 @@
 			enable-method = "psci";
 			cpu-idle-states = <&CPU_SLEEP_0>;
 			#cooling-cells = <2>;
+			dynamic-power-coefficient = <530>;
 			clocks = <&infracfg CLK_INFRA_CA72SEL>,
 				 <&apmixedsys CLK_APMIXED_MAINPLL>;
 			clock-names = "cpu", "intermediate";
@@ -196,6 +199,7 @@
 			enable-method = "psci";
 			cpu-idle-states = <&CPU_SLEEP_0>;
 			#cooling-cells = <2>;
+			dynamic-power-coefficient = <530>;
 			clocks = <&infracfg CLK_INFRA_CA72SEL>,
 				 <&apmixedsys CLK_APMIXED_MAINPLL>;
 			clock-names = "cpu", "intermediate";
@@ -1401,6 +1405,20 @@
 						 <&topckgen CLK_TOP_UNIVPLL1_D2>;
 		};
 
+		jpegdec: jpegdec@18004000 {
+			compatible = "mediatek,mt8173-jpgdec";
+			reg = <0 0x18004000 0 0x1000>;
+			interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&vencsys CLK_VENC_CKE0>,
+				 <&vencsys CLK_VENC_CKE3>;
+			clock-names = "jpgdec-smi",
+				      "jpgdec";
+			power-domains = <&scpsys MT8173_POWER_DOMAIN_VENC>;
+			mediatek,larb = <&larb3>;
+			iommus = <&iommu M4U_PORT_JPGDEC_WDMA>,
+				 <&iommu M4U_PORT_JPGDEC_BSDMA>;
+		};
+
 		vencltsys: clock-controller@19000000 {
 			compatible = "mediatek,mt8173-vencltsys", "syscon";
 			reg = <0 0x19000000 0 0x1000>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 10b32471bc7b..124f9d3e09f5 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -8,6 +8,7 @@
 #include <dt-bindings/clock/mt8183-clk.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/reset-controller/mt8183-resets.h>
 #include "mt8183-pinfunc.h"
 
 / {
@@ -227,6 +228,7 @@
 			compatible = "mediatek,mt8183-infracfg", "syscon";
 			reg = <0 0x10001000 0 0x1000>;
 			#clock-cells = <1>;
+			#reset-cells = <1>;
 		};
 
 		pio: pinctrl@10005000 {
@@ -278,6 +280,15 @@
 			clock-names = "clk13m";
 		};
 
+		gce: mailbox@10238000 {
+			compatible = "mediatek,mt8183-gce";
+			reg = <0 0x10238000 0 0x4000>;
+			interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_LOW>;
+			#mbox-cells = <3>;
+			clocks = <&infracfg CLK_INFRA_GCE>;
+			clock-names = "gce";
+		};
+
 		auxadc: auxadc@11001000 {
 			compatible = "mediatek,mt8183-auxadc",
 				     "mediatek,mt8173-auxadc";
diff --git a/arch/arm64/boot/dts/nvidia/tegra132.dtsi b/arch/arm64/boot/dts/nvidia/tegra132.dtsi
index 631a7f77c386..6238e6e274b4 100644
--- a/arch/arm64/boot/dts/nvidia/tegra132.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra132.dtsi
@@ -604,9 +604,11 @@
 		#iommu-cells = <1>;
 	};
 
-	emc: emc@7001b000 {
+	emc: external-memory-controller@7001b000 {
 		compatible = "nvidia,tegra132-emc", "nvidia,tegra124-emc";
 		reg = <0x0 0x7001b000 0x0 0x1000>;
+		clocks = <&tegra_car TEGRA124_CLK_EMC>;
+		clock-names = "emc";
 
 		nvidia,memory-controller = <&mc>;
 	};
diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
index 5e18acf5cfad..947744d0f04c 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
@@ -8,6 +8,7 @@
 	compatible = "nvidia,p3310", "nvidia,tegra186";
 
 	aliases {
+		ethernet0 = "/ethernet@2490000";
 		sdhci0 = "/sdhci@3460000";
 		sdhci1 = "/sdhci@3400000";
 		serial0 = &uarta;
diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
index 7893d78a0fb6..c905527c26ef 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
@@ -142,7 +142,29 @@
 	memory-controller@2c00000 {
 		compatible = "nvidia,tegra186-mc";
 		reg = <0x0 0x02c00000 0x0 0xb0000>;
+		interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
 		status = "disabled";
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		ranges = <0x0 0x02c00000 0x0 0x02c00000 0x0 0xb0000>;
+
+		/*
+		 * Memory clients have access to all 40 bits that the memory
+		 * controller can address.
+		 */
+		dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x0>;
+
+		emc: external-memory-controller@2c60000 {
+			compatible = "nvidia,tegra186-emc";
+			reg = <0x0 0x02c60000 0x0 0x50000>;
+			interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA186_CLK_EMC>;
+			clock-names = "emc";
+
+			nvidia,bpmp = <&bpmp>;
+		};
 	};
 
 	uarta: serial@3100000 {
@@ -524,12 +546,9 @@
 		reg = <0x0 0x03530000 0x0 0x8000>,
 		      <0x0 0x03538000 0x0 0x1000>;
 		reg-names = "hcd", "fpci";
-
-		iommus = <&smmu TEGRA186_SID_XUSB_HOST>;
 		interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
-
 		clocks = <&bpmp TEGRA186_CLK_XUSB_HOST>,
 			 <&bpmp TEGRA186_CLK_XUSB_FALCON>,
 			 <&bpmp TEGRA186_CLK_XUSB_SS>,
@@ -542,16 +561,15 @@
 		clock-names = "xusb_host", "xusb_falcon_src", "xusb_ss",
 			      "xusb_ss_src", "xusb_hs_src", "xusb_fs_src",
 			      "pll_u_480m", "clk_m", "pll_e";
-
 		power-domains = <&bpmp TEGRA186_POWER_DOMAIN_XUSBC>,
 				<&bpmp TEGRA186_POWER_DOMAIN_XUSBA>;
 		power-domain-names = "xusb_host", "xusb_ss";
-		nvidia,xusb-padctl = <&padctl>;
-
-		status = "disabled";
-
+		iommus = <&smmu TEGRA186_SID_XUSB_HOST>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		status = "disabled";
+
+		nvidia,xusb-padctl = <&padctl>;
 	};
 
 	fuse@3820000 {
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
index c7f2a20e6b02..bdd33ff4e324 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
@@ -48,6 +48,10 @@
 			};
 		};
 
+		memory-controller@2c00000 {
+			status = "okay";
+		};
+
 		serial@3110000 {
 			status = "okay";
 		};
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
index 353a6a22196d..985e7d84f161 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
@@ -152,7 +152,7 @@
 			gpios = <&gpio TEGRA194_MAIN_GPIO(G, 0)
 				       GPIO_ACTIVE_LOW>;
 			linux,input-type = <EV_KEY>;
-			linux,code = <BTN_1>;
+			linux,code = <KEY_SLEEP>;
 			debounce-interval = <10>;
 		};
 
diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
index 11220d97adb8..ccac43be12ac 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
@@ -7,6 +7,7 @@
 #include <dt-bindings/power/tegra194-powergate.h>
 #include <dt-bindings/reset/tegra194-reset.h>
 #include <dt-bindings/thermal/tegra194-bpmp-thermal.h>
+#include <dt-bindings/memory/tegra194-mc.h>
 
 / {
 	compatible = "nvidia,tegra194";
@@ -21,6 +22,12 @@
 		#size-cells = <1>;
 		ranges = <0x0 0x0 0x0 0x40000000>;
 
+		misc@100000 {
+			compatible = "nvidia,tegra194-misc";
+			reg = <0x00100000 0xf000>,
+			      <0x0010f000 0x1000>;
+		};
+
 		gpio: gpio@2200000 {
 			compatible = "nvidia,tegra194-gpio";
 			reg-names = "security", "gpio";
@@ -164,6 +171,48 @@
 			};
 		};
 
+		mc: memory-controller@2c00000 {
+			compatible = "nvidia,tegra194-mc";
+			reg = <0x02c00000 0x100000>,
+			      <0x02b80000 0x040000>,
+			      <0x01700000 0x100000>;
+			status = "disabled";
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+
+			ranges = <0x01700000 0x0 0x01700000 0x0 0x100000>,
+				 <0x02b80000 0x0 0x02b80000 0x0 0x040000>,
+				 <0x02c00000 0x0 0x02c00000 0x0 0x100000>;
+
+			/*
+			 * Bit 39 of addresses passing through the memory
+			 * controller selects the XBAR format used when memory
+			 * is accessed. This is used to transparently access
+			 * memory in the XBAR format used by the discrete GPU
+			 * (bit 39 set) or Tegra (bit 39 clear).
+			 *
+			 * As a consequence, the operating system must ensure
+			 * that bit 39 is never used implicitly, for example
+			 * via an I/O virtual address mapping of an IOMMU. If
+			 * devices require access to the XBAR switch, their
+			 * drivers must set this bit explicitly.
+			 *
+			 * Limit the DMA range for memory clients to [38:0].
+			 */
+			dma-ranges = <0x0 0x0 0x0 0x80 0x0>;
+
+			emc: external-memory-controller@2c60000 {
+				compatible = "nvidia,tegra194-emc";
+				reg = <0x0 0x02c60000 0x0 0x90000>,
+				      <0x0 0x01780000 0x0 0x80000>;
+				clocks = <&bpmp TEGRA194_CLK_EMC>;
+				clock-names = "emc";
+
+				nvidia,bpmp = <&bpmp>;
+			};
+		};
+
 		uarta: serial@3100000 {
 			compatible = "nvidia,tegra194-uart", "nvidia,tegra20-uart";
 			reg = <0x03100000 0x40>;
@@ -488,6 +537,13 @@
 			status = "disabled";
 		};
 
+		fuse@3820000 {
+			compatible = "nvidia,tegra194-efuse";
+			reg = <0x03820000 0x10000>;
+			clocks = <&bpmp TEGRA194_CLK_FUSE>;
+			clock-names = "fuse";
+		};
+
 		gic: interrupt-controller@3881000 {
 			compatible = "arm,gic-400";
 			#interrupt-cells = <3>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
index 90381d52ac54..9101d3a39cd2 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
@@ -536,6 +536,19 @@
 		vmmc-supply = <&vdd_3v3_sd>;
 	};
 
+	sdhci@700b0400 {
+		status = "okay";
+		bus-width = <4>;
+
+		vqmmc-supply = <&vdd_1v8>;
+		vmmc-supply = <&vdd_3v3_sys>;
+
+		non-removable;
+		cap-sdio-irq;
+		keep-power-in-suspend;
+		wakeup-source;
+	};
+
 	clocks {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -573,6 +586,66 @@
 		};
 	};
 
+	fan: fan {
+		compatible = "pwm-fan";
+		pwms = <&pwm 3 45334>;
+
+		cooling-levels = <0 64 128 255>;
+		#cooling-cells = <2>;
+	};
+
+	thermal-zones {
+		cpu {
+			trips {
+				cpu_trip_critical: critical {
+					temperature = <96500>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+
+				cpu_trip_hot: hot {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu_trip_active: active {
+					temperature = <50000>;
+					hysteresis = <2000>;
+					type = "active";
+				};
+
+				cpu_trip_passive: passive {
+					temperature = <30000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				cpu-critical {
+					cooling-device = <&fan 3 3>;
+					trip = <&cpu_trip_critical>;
+				};
+
+				cpu-hot {
+					cooling-device = <&fan 2 2>;
+					trip = <&cpu_trip_hot>;
+				};
+
+				cpu-active {
+					cooling-device = <&fan 1 1>;
+					trip = <&cpu_trip_active>;
+				};
+
+				cpu-passive {
+					cooling-device = <&fan 0 0>;
+					trip = <&cpu_trip_passive>;
+				};
+			};
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 6498a1ec893f..973c0f079659 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -1,6 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 dtb-$(CONFIG_ARCH_QCOM)	+= apq8016-sbc.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= apq8096-db820c.dtb
+dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk01.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-mtp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-longcheer-l8150.dtb
@@ -13,6 +14,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-asus-novago-tp370ql.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-hp-envy-x2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-lenovo-miix-630.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-idp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-cheza-r1.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-cheza-r2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-cheza-r3.dtb
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi
index ec2f0de67993..aff218c1b7b6 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi
@@ -8,6 +8,15 @@
 		pinconf {
 			pins = "gpio3";
 			function = PMIC_GPIO_FUNC_NORMAL;
+			input-disable;
+			output-high;
+		};
+	};
+
+	usb_hub_reset_pm_device: usb_hub_reset_pm_device {
+		pinconf {
+			pins = "gpio3";
+			function = PMIC_GPIO_FUNC_NORMAL;
 			output-low;
 		};
 	};
@@ -22,6 +31,16 @@
 		};
 	};
 
+	usb_sw_sel_pm_device: usb_sw_sel_pm_device {
+		pinconf {
+			pins = "gpio4";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			power-source = <PM8916_GPIO_VPH>;
+			input-disable;
+			output-low;
+		};
+	};
+
 	pm8916_gpios_leds: pm8916_gpios_leds {
 		pinconf {
 			pins = "gpio1", "gpio2";
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
index e12a36ce5d93..037e26b3f8d5 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
@@ -358,14 +358,15 @@
 		};
 
 		usb@78d9000 {
-			extcon = <&usb_id>;
+			extcon = <&usb_id>, <&usb_id>;
 			status = "okay";
 			adp-disable;
 			hnp-disable;
 			srp-disable;
-			dr_mode = "host";
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb_sw_sel_pm>;
+			dr_mode = "otg";
+			pinctrl-names = "default", "device";
+			pinctrl-0 = <&usb_sw_sel_pm &usb_hub_reset_pm>;
+			pinctrl-1 = <&usb_sw_sel_pm_device &usb_hub_reset_pm_device>;
 			ulpi {
 				phy {
 					v1p8-supply = <&pm8916_l7>;
@@ -504,7 +505,7 @@
 
 	usb_id: usb-id {
 		compatible = "linux,extcon-usb-gpio";
-		vbus-gpio = <&msmgpio 121 GPIO_ACTIVE_HIGH>;
+		id-gpio = <&msmgpio 121 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&usb_id_default>;
 	};
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c-pins.dtsi
deleted file mode 100644
index a5cc80d6e82f..000000000000
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c-pins.dtsi
+++ /dev/null
@@ -1,109 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (c) 2013-2016, The Linux Foundation. All rights reserved.
- */
-&msmgpio {
-	sdc2_cd_on: sdc2_cd_on {
-		mux {
-			pins = "gpio38";
-			function = "gpio";
-		};
-
-		config {
-			pins = "gpio38";
-			bias-pull-up;		/* pull up */
-			drive-strength = <16>;	/* 16 MA */
-		};
-	};
-
-	sdc2_cd_off: sdc2_cd_off {
-		mux {
-			pins = "gpio38";
-			function = "gpio";
-		};
-
-		config {
-			pins = "gpio38";
-			bias-pull-up;		/* pull up */
-			drive-strength = <2>;	/* 2 MA */
-		};
-	};
-
-	blsp1_uart1_default: blsp1_uart1_default {
-		mux {
-			pins = "gpio41", "gpio42", "gpio43", "gpio44";
-			function = "blsp_uart2";
-		};
-
-		config {
-			pins = "gpio41", "gpio42", "gpio43", "gpio44";
-			drive-strength = <16>;
-			bias-disable;
-		};
-	};
-
-	blsp1_uart1_sleep: blsp1_uart1_sleep {
-		mux {
-			pins = "gpio41", "gpio42", "gpio43", "gpio44";
-			function = "gpio";
-		};
-
-		config {
-			pins = "gpio41", "gpio42", "gpio43", "gpio44";
-			drive-strength = <2>;
-			bias-disable;
-		};
-	};
-
-	hdmi_hpd_active: hdmi_hpd_active {
-		mux {
-			pins = "gpio34";
-			function = "hdmi_hot";
-		};
-
-		config {
-			pins = "gpio34";
-			bias-pull-down;
-			drive-strength = <16>;
-		};
-	};
-
-	hdmi_hpd_suspend: hdmi_hpd_suspend {
-		mux {
-			pins = "gpio34";
-			function = "hdmi_hot";
-		};
-
-		config {
-			pins = "gpio34";
-			bias-pull-down;
-			drive-strength = <2>;
-		};
-	};
-
-	hdmi_ddc_active: hdmi_ddc_active {
-		mux {
-			pins = "gpio32", "gpio33";
-			function = "hdmi_ddc";
-		};
-
-		config {
-			pins = "gpio32", "gpio33";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-
-	hdmi_ddc_suspend: hdmi_ddc_suspend {
-		mux {
-			pins = "gpio32", "gpio33";
-			function = "hdmi_ddc";
-		};
-
-		config {
-			pins = "gpio32", "gpio33";
-			drive-strength = <2>;
-			bias-pull-down;
-		};
-	};
-};
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi
deleted file mode 100644
index 31a3e3311ad5..000000000000
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi
+++ /dev/null
@@ -1,92 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-&pm8994_gpios {
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&ls_exp_gpio_f &bt_en_gpios>;
-
-	ls_exp_gpio_f: pm8994_gpio5 {
-		pinconf {
-			pins = "gpio5";
-			output-low;
-			power-source = <2>; // PM8994_GPIO_S4, 1.8V
-		};
-	};
-
-	bt_en_gpios: bt_en_gpios {
-		pinconf {
-			pins = "gpio19";
-			function = PMIC_GPIO_FUNC_NORMAL;
-			output-low;
-			power-source = <PM8994_GPIO_S4>; // 1.8V
-			qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
-			bias-pull-down;
-		};
-	};
-
-	wlan_en_gpios: wlan_en_gpios {
-		pinconf {
-			pins = "gpio8";
-			function = PMIC_GPIO_FUNC_NORMAL;
-			output-low;
-			power-source = <PM8994_GPIO_S4>; // 1.8V
-			qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
-			bias-pull-down;
-		};
-	};
-
-	audio_mclk: clk_div1 {
-		pinconf {
-			pins = "gpio15";
-			function = "func1";
-			power-source = <PM8994_GPIO_S4>; // 1.8V
-		};
-	};
-
-	volume_up_gpio: pm8996_gpio2 {
-		pinconf {
-			pins = "gpio2";
-			function = "normal";
-			input-enable;
-			drive-push-pull;
-			bias-pull-up;
-			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
-			power-source = <PM8994_GPIO_S4>; // 1.8V
-		};
-	};
-
-	divclk4_pin_a: divclk4 {
-		pinconf {
-			pins = "gpio18";
-			function = PMIC_GPIO_FUNC_FUNC2;
-
-			bias-disable;
-			power-source = <PM8994_GPIO_S4>;
-		};
-	};
-
-	usb3_vbus_det_gpio: pm8996_gpio22 {
-		pinconf {
-			pins = "gpio22";
-			function = PMIC_GPIO_FUNC_NORMAL;
-			input-enable;
-			bias-pull-down;
-			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
-			power-source = <PM8994_GPIO_S4>; // 1.8V
-		};
-	};
-};
-
-&pmi8994_gpios {
-	usb2_vbus_det_gpio: pmi8996_gpio6 {
-		pinconf {
-			pins = "gpio6";
-			function = PMIC_GPIO_FUNC_NORMAL;
-			input-enable;
-			bias-pull-down;
-			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
-			power-source = <PM8994_GPIO_S4>; // 1.8V
-		};
-	};
-};
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
index dba3488492f1..fff6115f2670 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
@@ -6,10 +6,9 @@
 #include "msm8996.dtsi"
 #include "pm8994.dtsi"
 #include "pmi8994.dtsi"
-#include "apq8096-db820c-pins.dtsi"
-#include "apq8096-db820c-pmic-pins.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/sound/qcom,q6afe.h>
 #include <dt-bindings/sound/qcom,q6asm.h>
 
@@ -78,611 +77,837 @@
 		};
 	};
 
-	soc {
-		serial@7570000 {
-			label = "BT-UART";
-			status = "okay";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&blsp1_uart1_default>;
-			pinctrl-1 = <&blsp1_uart1_sleep>;
-
-			bluetooth {
-				compatible = "qcom,qca6174-bt";
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
 
-				/* bt_disable_n gpio */
-				enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&volume_up_gpio>;
 
-				clocks = <&divclk4>;
-			};
+		button@0 {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>;
 		};
+	};
 
-		serial@75b0000 {
-			label = "LS-UART1";
-			status = "okay";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&blsp2_uart1_2pins_default>;
-			pinctrl-1 = <&blsp2_uart1_2pins_sleep>;
-		};
-
-		serial@75b1000 {
-			label = "LS-UART0";
-			status = "disabled";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&blsp2_uart2_4pins_default>;
-			pinctrl-1 = <&blsp2_uart2_4pins_sleep>;
-		};
-
-		i2c@7577000 {
-		/* On Low speed expansion */
-			label = "LS-I2C0";
-			status = "okay";
-		};
-
-		i2c@75b6000 {
-		/* On Low speed expansion */
-			label = "LS-I2C1";
-			status = "okay";
-		};
-
-		spi@7575000 {
-		/* On Low speed expansion */
-			label = "LS-SPI0";
-			status = "okay";
-		};
-
-		i2c@75b5000 {
-		/* On High speed expansion */
-			label = "HS-I2C2";
-			status = "okay";
-		};
-
-		spi@75ba000{
-		/* On High speed expansion */
-			label = "HS-SPI1";
-			status = "okay";
-		};
-
-		sdhci@74a4900 {
-		/* External SD card */
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
-			pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
-			cd-gpios = <&msmgpio 38 0x1>;
-			vmmc-supply = <&pm8994_l21>;
-			vqmmc-supply = <&pm8994_l13>;
-			status = "okay";
-		};
-
-		phy@627000 {
-			status = "okay";
-		};
-
-		ufshc@624000 {
-			status = "okay";
-		};
-
-		pinctrl@1010000 {
-			gpio-line-names =
-				"[SPI0_DOUT]", /* GPIO_0, BLSP1_SPI_MOSI, LSEC pin 14 */
-				"[SPI0_DIN]", /* GPIO_1, BLSP1_SPI_MISO, LSEC pin 10 */
-				"[SPI0_CS]", /* GPIO_2, BLSP1_SPI_CS_N, LSEC pin 12 */
-				"[SPI0_SCLK]", /* GPIO_3, BLSP1_SPI_CLK, LSEC pin 8 */
-				"[UART1_TxD]", /* GPIO_4, BLSP8_UART_TX, LSEC pin 11 */
-				"[UART1_RxD]", /* GPIO_5, BLSP8_UART_RX, LSEC pin 13 */
-				"[I2C1_SDA]", /* GPIO_6, BLSP8_I2C_SDA, LSEC pin 21 */
-				"[I2C1_SCL]", /* GPIO_7, BLSP8_I2C_SCL, LSEC pin 19 */
-				"GPIO-H", /* GPIO_8, LCD0_RESET_N, LSEC pin 30 */
-				"TP93", /* GPIO_9 */
-				"GPIO-G", /* GPIO_10, MDP_VSYNC_P, LSEC pin 29 */
-				"[MDP_VSYNC_S]", /* GPIO_11, S HSEC pin 55 */
-				"NC", /* GPIO_12 */
-				"[CSI0_MCLK]", /* GPIO_13, CAM_MCLK0, P HSEC pin 15 */
-				"[CAM_MCLK1]", /* GPIO_14, J14 pin 11 */
-				"[CSI1_MCLK]", /* GPIO_15, CAM_MCLK2, P HSEC pin 17 */
-				"TP99", /* GPIO_16 */
-				"[I2C2_SDA]", /* GPIO_17, CCI_I2C_SDA0, P HSEC pin 34 */
-				"[I2C2_SCL]", /* GPIO_18, CCI_I2C_SCL0, P HSEC pin 32 */
-				"[CCI_I2C_SDA1]", /* GPIO_19, S HSEC pin 38 */
-				"[CCI_I2C_SCL1]", /* GPIO_20, S HSEC pin 36 */
-				"FLASH_STROBE_EN", /* GPIO_21, S HSEC pin 5 */
-				"FLASH_STROBE_TRIG", /* GPIO_22, S HSEC pin 1 */
-				"GPIO-K", /* GPIO_23, CAM2_RST_N, LSEC pin 33 */
-				"GPIO-D", /* GPIO_24, LSEC pin 26 */
-				"GPIO-I", /* GPIO_25, CAM0_RST_N, LSEC pin 31 */
-				"GPIO-J", /* GPIO_26, CAM0_STANDBY_N, LSEC pin 32 */
-				"BLSP6_I2C_SDA", /* GPIO_27 */
-				"BLSP6_I2C_SCL", /* GPIO_28 */
-				"GPIO-B", /* GPIO_29, TS0_RESET_N, LSEC pin 24 */
-				"GPIO30", /* GPIO_30, S HSEC pin 4 */
-				"HDMI_CEC", /* GPIO_31 */
-				"HDMI_DDC_CLOCK", /* GPIO_32 */
-				"HDMI_DDC_DATA", /* GPIO_33 */
-				"HDMI_HOT_PLUG_DETECT", /* GPIO_34 */
-				"PCIE0_RST_N", /* GPIO_35 */
-				"PCIE0_CLKREQ_N", /* GPIO_36 */
-				"PCIE0_WAKE", /* GPIO_37 */
-				"SD_CARD_DET_N", /* GPIO_38 */
-				"TSIF1_SYNC", /* GPIO_39, S HSEC pin 48 */
-				"W_DISABLE_N", /* GPIO_40 */
-				"[BLSP9_UART_TX]", /* GPIO_41 */
-				"[BLSP9_UART_RX]", /* GPIO_42 */
-				"[BLSP2_UART_CTS_N]", /* GPIO_43 */
-				"[BLSP2_UART_RFR_N]", /* GPIO_44 */
-				"[BLSP3_UART_TX]", /* GPIO_45 */
-				"[BLSP3_UART_RX]", /* GPIO_46 */
-				"[I2C0_SDA]", /* GPIO_47, LS_I2C0_SDA, LSEC pin 17 */
-				"[I2C0_SCL]", /* GPIO_48, LS_I2C0_SCL, LSEC pin 15 */
-				"[UART0_TxD]", /* GPIO_49, BLSP9_UART_TX, LSEC pin 5 */
-				"[UART0_RxD]", /* GPIO_50, BLSP9_UART_RX, LSEC pin 7 */
-				"[UART0_CTS]", /* GPIO_51, BLSP9_UART_CTS_N, LSEC pin 3 */
-				"[UART0_RTS]", /* GPIO_52, BLSP9_UART_RFR_N, LSEC pin 9 */
-				"[CODEC_INT1_N]", /* GPIO_53 */
-				"[CODEC_INT2_N]", /* GPIO_54 */
-				"[BLSP7_I2C_SDA]", /* GPIO_55 */
-				"[BLSP7_I2C_SCL]", /* GPIO_56 */
-				"MI2S_MCLK", /* GPIO_57, S HSEC pin 3 */
-				"[PCM_CLK]", /* GPIO_58, QUA_MI2S_SCK, LSEC pin 18 */
-				"[PCM_FS]", /* GPIO_59, QUA_MI2S_WS, LSEC pin 16 */
-				"[PCM_DO]", /* GPIO_60, QUA_MI2S_DATA0, LSEC pin 20 */
-				"[PCM_DI]", /* GPIO_61, QUA_MI2S_DATA1, LSEC pin 22 */
-				"GPIO-E", /* GPIO_62, LSEC pin 27 */
-				"TP87", /* GPIO_63 */
-				"[CODEC_RST_N]", /* GPIO_64 */
-				"[PCM1_CLK]", /* GPIO_65 */
-				"[PCM1_SYNC]", /* GPIO_66 */
-				"[PCM1_DIN]", /* GPIO_67 */
-				"[PCM1_DOUT]", /* GPIO_68 */
-				"AUDIO_REF_CLK", /* GPIO_69 */
-				"SLIMBUS_CLK", /* GPIO_70 */
-				"SLIMBUS_DATA0", /* GPIO_71 */
-				"SLIMBUS_DATA1", /* GPIO_72 */
-				"NC", /* GPIO_73 */
-				"NC", /* GPIO_74 */
-				"NC", /* GPIO_75 */
-				"NC", /* GPIO_76 */
-				"TP94", /* GPIO_77 */
-				"NC", /* GPIO_78 */
-				"TP95", /* GPIO_79 */
-				"GPIO-A", /* GPIO_80, MEMS_RESET_N, LSEC pin 23 */
-				"TP88", /* GPIO_81 */
-				"TP89", /* GPIO_82 */
-				"TP90", /* GPIO_83 */
-				"TP91", /* GPIO_84 */
-				"[SD_DAT0]", /* GPIO_85, BLSP12_SPI_MOSI, P HSEC pin 1 */
-				"[SD_CMD]", /* GPIO_86, BLSP12_SPI_MISO, P HSEC pin 11 */
-				"[SD_DAT3]", /* GPIO_87, BLSP12_SPI_CS_N, P HSEC pin 7 */
-				"[SD_SCLK]", /* GPIO_88, BLSP12_SPI_CLK, P HSEC pin 9 */
-				"TSIF1_CLK", /* GPIO_89, S HSEC pin 42 */
-				"TSIF1_EN", /* GPIO_90, S HSEC pin 46 */
-				"TSIF1_DATA", /* GPIO_91, S HSEC pin 44 */
-				"NC", /* GPIO_92 */
-				"TSIF2_CLK", /* GPIO_93, S HSEC pin 52 */
-				"TSIF2_EN", /* GPIO_94, S HSEC pin 56 */
-				"TSIF2_DATA", /* GPIO_95, S HSEC pin 54 */
-				"TSIF2_SYNC", /* GPIO_96, S HSEC pin 58 */
-				"NC", /* GPIO_97 */
-				"CAM1_STANDBY_N", /* GPIO_98 */
-				"NC", /* GPIO_99 */
-				"NC", /* GPIO_100 */
-				"[LCD1_RESET_N]", /* GPIO_101, S HSEC pin 51 */
-				"BOOT_CONFIG1", /* GPIO_102 */
-				"USB_HUB_RESET", /* GPIO_103 */
-				"CAM1_RST_N", /* GPIO_104 */
-				"NC", /* GPIO_105 */
-				"NC", /* GPIO_106 */
-				"NC", /* GPIO_107 */
-				"NC", /* GPIO_108 */
-				"NC", /* GPIO_109 */
-				"NC", /* GPIO_110 */
-				"NC", /* GPIO_111 */
-				"NC", /* GPIO_112 */
-				"PMI8994_BUA", /* GPIO_113 */
-				"PCIE2_RST_N", /* GPIO_114 */
-				"PCIE2_CLKREQ_N", /* GPIO_115 */
-				"PCIE2_WAKE", /* GPIO_116 */
-				"SSC_IRQ_0", /* GPIO_117 */
-				"SSC_IRQ_1", /* GPIO_118 */
-				"SSC_IRQ_2", /* GPIO_119 */
-				"NC", /* GPIO_120 */
-				"GPIO121", /* GPIO_121, S HSEC pin 2 */
-				"NC", /* GPIO_122 */
-				"SSC_IRQ_6", /* GPIO_123 */
-				"SSC_IRQ_7", /* GPIO_124 */
-				"GPIO-C", /* GPIO_125, TS_INT0, LSEC pin 25 */
-				"BOOT_CONFIG5", /* GPIO_126 */
-				"NC", /* GPIO_127 */
-				"NC", /* GPIO_128 */
-				"BOOT_CONFIG7", /* GPIO_129 */
-				"PCIE1_RST_N", /* GPIO_130 */
-				"PCIE1_CLKREQ_N", /* GPIO_131 */
-				"PCIE1_WAKE", /* GPIO_132 */
-				"GPIO-L", /* GPIO_133, CAM2_STANDBY_N, LSEC pin 34 */
-				"NC", /* GPIO_134 */
-				"NC", /* GPIO_135 */
-				"BOOT_CONFIG8", /* GPIO_136 */
-				"NC", /* GPIO_137 */
-				"NC", /* GPIO_138 */
-				"GPS_SSBI2", /* GPIO_139 */
-				"GPS_SSBI1", /* GPIO_140 */
-				"NC", /* GPIO_141 */
-				"NC", /* GPIO_142 */
-				"NC", /* GPIO_143 */
-				"BOOT_CONFIG6", /* GPIO_144 */
-				"NC", /* GPIO_145 */
-				"NC", /* GPIO_146 */
-				"NC", /* GPIO_147 */
-				"NC", /* GPIO_148 */
-				"NC"; /* GPIO_149 */
-		};
-
-		qcom,spmi@400f000 {
-			pmic@0 {
-				gpios@c000 {
-					gpio-line-names =
-						"NC",
-						"KEY_VOLP_N",
-						"NC",
-						"BL1_PWM",
-						"GPIO-F", /* BL0_PWM, LSEC pin 28 */
-						"BL1_EN",
-						"NC",
-						"WLAN_EN",
-						"NC",
-						"NC",
-						"NC",
-						"NC",
-						"NC",
-						"NC",
-						"DIVCLK1",
-						"DIVCLK2",
-						"DIVCLK3",
-						"DIVCLK4",
-						"BT_EN",
-						"PMIC_SLB",
-						"PMIC_BUA",
-						"USB_VBUS_DET";
-				};
-
-				mpps@a000 {
-					gpio-line-names =
-						"VDDPX_BIAS",
-						"WIFI_LED",
-						"NC",
-						"BT_LED",
-						"PM_MPP05",
-						"PM_MPP06",
-						"PM_MPP07",
-						"NC";
-				};
-			};
+	usb2_id: usb2-id {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&pmi8994_gpios 6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb2_vbus_det_gpio>;
+	};
 
-			pmic@2 {
-				gpios@c000 {
-					gpio-line-names =
-						"NC",
-						"SPKR_AMP_EN1",
-						"SPKR_AMP_EN2",
-						"TP61",
-						"NC",
-						"USB2_VBUS_DET",
-						"NC",
-						"NC",
-						"NC",
-						"NC";
-				};
-			};
-		};
+	usb3_id: usb3-id {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&pm8994_gpios 22 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb3_vbus_det_gpio>;
+	};
 
-		phy@34000 {
-			status = "okay";
-		};
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-always-on;
+		regulator-boot-on;
+
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	vreg_s8a_l3a_input: vreg-s8a-l3a-input {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s8a_l3a_input";
+		regulator-always-on;
+		regulator-boot-on;
+
+		regulator-min-microvolt = <0>;
+		regulator-max-microvolt = <0>;
+	};
+
+	wlan_en: wlan-en-1-8v {
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_en_gpios>;
+		compatible = "regulator-fixed";
+		regulator-name = "wlan-en-regulator";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&pm8994_gpios 8 0>;
+
+		/* WLAN card specific delay */
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+};
+
+&blsp1_i2c2 {
+	/* On Low speed expansion */
+	label = "LS-I2C0";
+	status = "okay";
+};
+
+&blsp1_spi0 {
+	/* On Low speed expansion */
+	label = "LS-SPI0";
+	status = "okay";
+};
+
+&blsp1_uart1 {
+	label = "BT-UART";
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&blsp1_uart1_default>;
+	pinctrl-1 = <&blsp1_uart1_sleep>;
+
+	bluetooth {
+		compatible = "qcom,qca6174-bt";
+
+		/* bt_disable_n gpio */
+		enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
+
+		clocks = <&divclk4>;
+	};
+};
+
+&blsp2_i2c0 {
+	/* On High speed expansion */
+	label = "HS-I2C2";
+	status = "okay";
+};
+
+&blsp2_i2c1 {
+	/* On Low speed expansion */
+	label = "LS-I2C1";
+	status = "okay";
+};
+
+&blsp2_spi5 {
+	/* On High speed expansion */
+	label = "HS-SPI1";
+	status = "okay";
+};
+
+&blsp2_uart1 {
+	label = "LS-UART1";
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&blsp2_uart1_2pins_default>;
+	pinctrl-1 = <&blsp2_uart1_2pins_sleep>;
+};
+
+&blsp2_uart2 {
+	label = "LS-UART0";
+	status = "disabled";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&blsp2_uart2_4pins_default>;
+	pinctrl-1 = <&blsp2_uart2_4pins_sleep>;
+};
+
+&camss {
+	vdda-supply = <&vreg_l2a_1p25>;
+};
+
+&hdmi {
+	status = "okay";
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&hdmi_hpd_active &hdmi_ddc_active>;
+	pinctrl-1 = <&hdmi_hpd_suspend &hdmi_ddc_suspend>;
+
+	core-vdda-supply = <&vreg_l12a_1p8>;
+	core-vcc-supply = <&vreg_s4a_1p8>;
+};
+
+&hdmi_phy {
+	status = "okay";
+
+	vddio-supply = <&vreg_l12a_1p8>;
+	vcca-supply = <&vreg_l28a_0p925>;
+	#phy-cells = <0>;
+};
+
+&hsusb_phy1 {
+	status = "okay";
+
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
+};
+
+&hsusb_phy2 {
+	status = "okay";
+
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
+};
+
+&mdp {
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
 
-		phy@7410000 {
-			status = "okay";
+&msmgpio {
+	gpio-line-names =
+		"[SPI0_DOUT]", /* GPIO_0, BLSP1_SPI_MOSI, LSEC pin 14 */
+		"[SPI0_DIN]", /* GPIO_1, BLSP1_SPI_MISO, LSEC pin 10 */
+		"[SPI0_CS]", /* GPIO_2, BLSP1_SPI_CS_N, LSEC pin 12 */
+		"[SPI0_SCLK]", /* GPIO_3, BLSP1_SPI_CLK, LSEC pin 8 */
+		"[UART1_TxD]", /* GPIO_4, BLSP8_UART_TX, LSEC pin 11 */
+		"[UART1_RxD]", /* GPIO_5, BLSP8_UART_RX, LSEC pin 13 */
+		"[I2C1_SDA]", /* GPIO_6, BLSP8_I2C_SDA, LSEC pin 21 */
+		"[I2C1_SCL]", /* GPIO_7, BLSP8_I2C_SCL, LSEC pin 19 */
+		"GPIO-H", /* GPIO_8, LCD0_RESET_N, LSEC pin 30 */
+		"TP93", /* GPIO_9 */
+		"GPIO-G", /* GPIO_10, MDP_VSYNC_P, LSEC pin 29 */
+		"[MDP_VSYNC_S]", /* GPIO_11, S HSEC pin 55 */
+		"NC", /* GPIO_12 */
+		"[CSI0_MCLK]", /* GPIO_13, CAM_MCLK0, P HSEC pin 15 */
+		"[CAM_MCLK1]", /* GPIO_14, J14 pin 11 */
+		"[CSI1_MCLK]", /* GPIO_15, CAM_MCLK2, P HSEC pin 17 */
+		"TP99", /* GPIO_16 */
+		"[I2C2_SDA]", /* GPIO_17, CCI_I2C_SDA0, P HSEC pin 34 */
+		"[I2C2_SCL]", /* GPIO_18, CCI_I2C_SCL0, P HSEC pin 32 */
+		"[CCI_I2C_SDA1]", /* GPIO_19, S HSEC pin 38 */
+		"[CCI_I2C_SCL1]", /* GPIO_20, S HSEC pin 36 */
+		"FLASH_STROBE_EN", /* GPIO_21, S HSEC pin 5 */
+		"FLASH_STROBE_TRIG", /* GPIO_22, S HSEC pin 1 */
+		"GPIO-K", /* GPIO_23, CAM2_RST_N, LSEC pin 33 */
+		"GPIO-D", /* GPIO_24, LSEC pin 26 */
+		"GPIO-I", /* GPIO_25, CAM0_RST_N, LSEC pin 31 */
+		"GPIO-J", /* GPIO_26, CAM0_STANDBY_N, LSEC pin 32 */
+		"BLSP6_I2C_SDA", /* GPIO_27 */
+		"BLSP6_I2C_SCL", /* GPIO_28 */
+		"GPIO-B", /* GPIO_29, TS0_RESET_N, LSEC pin 24 */
+		"GPIO30", /* GPIO_30, S HSEC pin 4 */
+		"HDMI_CEC", /* GPIO_31 */
+		"HDMI_DDC_CLOCK", /* GPIO_32 */
+		"HDMI_DDC_DATA", /* GPIO_33 */
+		"HDMI_HOT_PLUG_DETECT", /* GPIO_34 */
+		"PCIE0_RST_N", /* GPIO_35 */
+		"PCIE0_CLKREQ_N", /* GPIO_36 */
+		"PCIE0_WAKE", /* GPIO_37 */
+		"SD_CARD_DET_N", /* GPIO_38 */
+		"TSIF1_SYNC", /* GPIO_39, S HSEC pin 48 */
+		"W_DISABLE_N", /* GPIO_40 */
+		"[BLSP9_UART_TX]", /* GPIO_41 */
+		"[BLSP9_UART_RX]", /* GPIO_42 */
+		"[BLSP2_UART_CTS_N]", /* GPIO_43 */
+		"[BLSP2_UART_RFR_N]", /* GPIO_44 */
+		"[BLSP3_UART_TX]", /* GPIO_45 */
+		"[BLSP3_UART_RX]", /* GPIO_46 */
+		"[I2C0_SDA]", /* GPIO_47, LS_I2C0_SDA, LSEC pin 17 */
+		"[I2C0_SCL]", /* GPIO_48, LS_I2C0_SCL, LSEC pin 15 */
+		"[UART0_TxD]", /* GPIO_49, BLSP9_UART_TX, LSEC pin 5 */
+		"[UART0_RxD]", /* GPIO_50, BLSP9_UART_RX, LSEC pin 7 */
+		"[UART0_CTS]", /* GPIO_51, BLSP9_UART_CTS_N, LSEC pin 3 */
+		"[UART0_RTS]", /* GPIO_52, BLSP9_UART_RFR_N, LSEC pin 9 */
+		"[CODEC_INT1_N]", /* GPIO_53 */
+		"[CODEC_INT2_N]", /* GPIO_54 */
+		"[BLSP7_I2C_SDA]", /* GPIO_55 */
+		"[BLSP7_I2C_SCL]", /* GPIO_56 */
+		"MI2S_MCLK", /* GPIO_57, S HSEC pin 3 */
+		"[PCM_CLK]", /* GPIO_58, QUA_MI2S_SCK, LSEC pin 18 */
+		"[PCM_FS]", /* GPIO_59, QUA_MI2S_WS, LSEC pin 16 */
+		"[PCM_DO]", /* GPIO_60, QUA_MI2S_DATA0, LSEC pin 20 */
+		"[PCM_DI]", /* GPIO_61, QUA_MI2S_DATA1, LSEC pin 22 */
+		"GPIO-E", /* GPIO_62, LSEC pin 27 */
+		"TP87", /* GPIO_63 */
+		"[CODEC_RST_N]", /* GPIO_64 */
+		"[PCM1_CLK]", /* GPIO_65 */
+		"[PCM1_SYNC]", /* GPIO_66 */
+		"[PCM1_DIN]", /* GPIO_67 */
+		"[PCM1_DOUT]", /* GPIO_68 */
+		"AUDIO_REF_CLK", /* GPIO_69 */
+		"SLIMBUS_CLK", /* GPIO_70 */
+		"SLIMBUS_DATA0", /* GPIO_71 */
+		"SLIMBUS_DATA1", /* GPIO_72 */
+		"NC", /* GPIO_73 */
+		"NC", /* GPIO_74 */
+		"NC", /* GPIO_75 */
+		"NC", /* GPIO_76 */
+		"TP94", /* GPIO_77 */
+		"NC", /* GPIO_78 */
+		"TP95", /* GPIO_79 */
+		"GPIO-A", /* GPIO_80, MEMS_RESET_N, LSEC pin 23 */
+		"TP88", /* GPIO_81 */
+		"TP89", /* GPIO_82 */
+		"TP90", /* GPIO_83 */
+		"TP91", /* GPIO_84 */
+		"[SD_DAT0]", /* GPIO_85, BLSP12_SPI_MOSI, P HSEC pin 1 */
+		"[SD_CMD]", /* GPIO_86, BLSP12_SPI_MISO, P HSEC pin 11 */
+		"[SD_DAT3]", /* GPIO_87, BLSP12_SPI_CS_N, P HSEC pin 7 */
+		"[SD_SCLK]", /* GPIO_88, BLSP12_SPI_CLK, P HSEC pin 9 */
+		"TSIF1_CLK", /* GPIO_89, S HSEC pin 42 */
+		"TSIF1_EN", /* GPIO_90, S HSEC pin 46 */
+		"TSIF1_DATA", /* GPIO_91, S HSEC pin 44 */
+		"NC", /* GPIO_92 */
+		"TSIF2_CLK", /* GPIO_93, S HSEC pin 52 */
+		"TSIF2_EN", /* GPIO_94, S HSEC pin 56 */
+		"TSIF2_DATA", /* GPIO_95, S HSEC pin 54 */
+		"TSIF2_SYNC", /* GPIO_96, S HSEC pin 58 */
+		"NC", /* GPIO_97 */
+		"CAM1_STANDBY_N", /* GPIO_98 */
+		"NC", /* GPIO_99 */
+		"NC", /* GPIO_100 */
+		"[LCD1_RESET_N]", /* GPIO_101, S HSEC pin 51 */
+		"BOOT_CONFIG1", /* GPIO_102 */
+		"USB_HUB_RESET", /* GPIO_103 */
+		"CAM1_RST_N", /* GPIO_104 */
+		"NC", /* GPIO_105 */
+		"NC", /* GPIO_106 */
+		"NC", /* GPIO_107 */
+		"NC", /* GPIO_108 */
+		"NC", /* GPIO_109 */
+		"NC", /* GPIO_110 */
+		"NC", /* GPIO_111 */
+		"NC", /* GPIO_112 */
+		"PMI8994_BUA", /* GPIO_113 */
+		"PCIE2_RST_N", /* GPIO_114 */
+		"PCIE2_CLKREQ_N", /* GPIO_115 */
+		"PCIE2_WAKE", /* GPIO_116 */
+		"SSC_IRQ_0", /* GPIO_117 */
+		"SSC_IRQ_1", /* GPIO_118 */
+		"SSC_IRQ_2", /* GPIO_119 */
+		"NC", /* GPIO_120 */
+		"GPIO121", /* GPIO_121, S HSEC pin 2 */
+		"NC", /* GPIO_122 */
+		"SSC_IRQ_6", /* GPIO_123 */
+		"SSC_IRQ_7", /* GPIO_124 */
+		"GPIO-C", /* GPIO_125, TS_INT0, LSEC pin 25 */
+		"BOOT_CONFIG5", /* GPIO_126 */
+		"NC", /* GPIO_127 */
+		"NC", /* GPIO_128 */
+		"BOOT_CONFIG7", /* GPIO_129 */
+		"PCIE1_RST_N", /* GPIO_130 */
+		"PCIE1_CLKREQ_N", /* GPIO_131 */
+		"PCIE1_WAKE", /* GPIO_132 */
+		"GPIO-L", /* GPIO_133, CAM2_STANDBY_N, LSEC pin 34 */
+		"NC", /* GPIO_134 */
+		"NC", /* GPIO_135 */
+		"BOOT_CONFIG8", /* GPIO_136 */
+		"NC", /* GPIO_137 */
+		"NC", /* GPIO_138 */
+		"GPS_SSBI2", /* GPIO_139 */
+		"GPS_SSBI1", /* GPIO_140 */
+		"NC", /* GPIO_141 */
+		"NC", /* GPIO_142 */
+		"NC", /* GPIO_143 */
+		"BOOT_CONFIG6", /* GPIO_144 */
+		"NC", /* GPIO_145 */
+		"NC", /* GPIO_146 */
+		"NC", /* GPIO_147 */
+		"NC", /* GPIO_148 */
+		"NC"; /* GPIO_149 */
+
+	sdc2_cd_on: sdc2_cd_on {
+		mux {
+			pins = "gpio38";
+			function = "gpio";
 		};
 
-		phy@7411000 {
-			status = "okay";
+		config {
+			pins = "gpio38";
+			bias-pull-up;		/* pull up */
+			drive-strength = <16>;	/* 16 MA */
 		};
+	};
 
-		phy@7412000 {
-			status = "okay";
+	sdc2_cd_off: sdc2_cd_off {
+		mux {
+			pins = "gpio38";
+			function = "gpio";
 		};
 
-		usb@6af8800 {
-			status = "okay";
-			extcon = <&usb3_id>;
+		config {
+			pins = "gpio38";
+			bias-pull-up;		/* pull up */
+			drive-strength = <2>;	/* 2 MA */
+		};
+	};
 
-			dwc3@6a00000 {
-				extcon = <&usb3_id>;
-				dr_mode = "otg";
-			};
+	blsp1_uart1_default: blsp1_uart1_default {
+		mux {
+			pins = "gpio41", "gpio42", "gpio43", "gpio44";
+			function = "blsp_uart2";
 		};
 
-		usb3_id: usb3-id {
-			compatible = "linux,extcon-usb-gpio";
-			id-gpio = <&pm8994_gpios 22 GPIO_ACTIVE_HIGH>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb3_vbus_det_gpio>;
+		config {
+			pins = "gpio41", "gpio42", "gpio43", "gpio44";
+			drive-strength = <16>;
+			bias-disable;
 		};
+	};
 
-		usb@76f8800 {
-			status = "okay";
-			extcon = <&usb2_id>;
+	blsp1_uart1_sleep: blsp1_uart1_sleep {
+		mux {
+			pins = "gpio41", "gpio42", "gpio43", "gpio44";
+			function = "gpio";
+		};
 
-			dwc3@7600000 {
-				extcon = <&usb2_id>;
-				dr_mode = "otg";
-				maximum-speed = "high-speed";
-			};
+		config {
+			pins = "gpio41", "gpio42", "gpio43", "gpio44";
+			drive-strength = <2>;
+			bias-disable;
 		};
+	};
 
-		usb2_id: usb2-id {
-			compatible = "linux,extcon-usb-gpio";
-			id-gpio = <&pmi8994_gpios 6 GPIO_ACTIVE_HIGH>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb2_vbus_det_gpio>;
+	hdmi_hpd_active: hdmi_hpd_active {
+		mux {
+			pins = "gpio34";
+			function = "hdmi_hot";
 		};
 
-		wlan_en: wlan-en-1-8v {
-			pinctrl-names = "default";
-			pinctrl-0 = <&wlan_en_gpios>;
-			compatible = "regulator-fixed";
-			regulator-name = "wlan-en-regulator";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
+		config {
+			pins = "gpio34";
+			bias-pull-down;
+			drive-strength = <16>;
+		};
+	};
 
-			gpio = <&pm8994_gpios 8 0>;
+	hdmi_hpd_suspend: hdmi_hpd_suspend {
+		mux {
+			pins = "gpio34";
+			function = "hdmi_hot";
+		};
 
-			/* WLAN card specific delay */
-			startup-delay-us = <70000>;
-			enable-active-high;
+		config {
+			pins = "gpio34";
+			bias-pull-down;
+			drive-strength = <2>;
 		};
+	};
 
-		agnoc@0 {
-			pcie@600000 {
-				status = "okay";
-				perst-gpio = <&msmgpio 35 GPIO_ACTIVE_LOW>;
-				vddpe-3v3-supply = <&wlan_en>;
-			};
+	hdmi_ddc_active: hdmi_ddc_active {
+		mux {
+			pins = "gpio32", "gpio33";
+			function = "hdmi_ddc";
+		};
 
-			pcie@608000 {
-				status = "okay";
-				perst-gpio = <&msmgpio 130 GPIO_ACTIVE_LOW>;
-			};
+		config {
+			pins = "gpio32", "gpio33";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
 
-			pcie@610000 {
-				status = "okay";
-				perst-gpio = <&msmgpio 114 GPIO_ACTIVE_LOW>;
-			};
+	hdmi_ddc_suspend: hdmi_ddc_suspend {
+		mux {
+			pins = "gpio32", "gpio33";
+			function = "hdmi_ddc";
 		};
 
-		slim_msm: slim@91c0000 {
-			ngd@1 {
-				wcd9335: codec@1{
-					clock-names = "mclk", "slimbus";
-					clocks = <&div1_mclk>,
-						 <&rpmcc RPM_SMD_BB_CLK1>;
-				};
-			};
+		config {
+			pins = "gpio32", "gpio33";
+			drive-strength = <2>;
+			bias-pull-down;
 		};
+	};
+};
 
-		mdss@900000 {
-			status = "okay";
+&pcie0 {
+	status = "okay";
+	perst-gpio = <&msmgpio 35 GPIO_ACTIVE_LOW>;
+	vddpe-3v3-supply = <&wlan_en>;
+	vdda-supply = <&vreg_l28a_0p925>;
+};
 
-			mdp@901000 {
-				status = "okay";
-			};
+&pcie1 {
+	status = "okay";
+	perst-gpio = <&msmgpio 130 GPIO_ACTIVE_LOW>;
+	vdda-supply = <&vreg_l28a_0p925>;
+};
 
-			hdmi-phy@9a0600 {
-				status = "okay";
+&pcie2 {
+	status = "okay";
+	perst-gpio = <&msmgpio 114 GPIO_ACTIVE_LOW>;
+	vdda-supply = <&vreg_l28a_0p925>;
+};
 
-				vddio-supply = <&pm8994_l12>;
-				vcca-supply = <&pm8994_l28>;
-				#phy-cells = <0>;
-			};
+&pcie_phy {
+	status = "okay";
 
-			hdmi-tx@9a0000 {
-				status = "okay";
+	vdda-phy-supply = <&vreg_l28a_0p925>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+};
 
-				pinctrl-names = "default", "sleep";
-				pinctrl-0 = <&hdmi_hpd_active &hdmi_ddc_active>;
-				pinctrl-1 = <&hdmi_hpd_suspend &hdmi_ddc_suspend>;
+&pm8994_gpios {
+	gpio-line-names =
+		"NC",
+		"KEY_VOLP_N",
+		"NC",
+		"BL1_PWM",
+		"GPIO-F", /* BL0_PWM, LSEC pin 28 */
+		"BL1_EN",
+		"NC",
+		"WLAN_EN",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"DIVCLK1",
+		"DIVCLK2",
+		"DIVCLK3",
+		"DIVCLK4",
+		"BT_EN",
+		"PMIC_SLB",
+		"PMIC_BUA",
+		"USB_VBUS_DET";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&ls_exp_gpio_f &bt_en_gpios>;
+
+	ls_exp_gpio_f: pm8994_gpio5 {
+		pinconf {
+			pins = "gpio5";
+			output-low;
+			power-source = <2>; // PM8994_GPIO_S4, 1.8V
+		};
+	};
 
-				core-vdda-supply = <&pm8994_l12>;
-				core-vcc-supply = <&pm8994_s4>;
-			};
+	bt_en_gpios: bt_en_gpios {
+		pinconf {
+			pins = "gpio19";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			output-low;
+			power-source = <PM8994_GPIO_S4>; // 1.8V
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+			bias-pull-down;
 		};
 	};
 
+	wlan_en_gpios: wlan_en_gpios {
+		pinconf {
+			pins = "gpio8";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			output-low;
+			power-source = <PM8994_GPIO_S4>; // 1.8V
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+			bias-pull-down;
+		};
+	};
 
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		autorepeat;
+	audio_mclk: clk_div1 {
+		pinconf {
+			pins = "gpio15";
+			function = "func1";
+			power-source = <PM8994_GPIO_S4>; // 1.8V
+		};
+	};
 
-		pinctrl-names = "default";
-		pinctrl-0 = <&volume_up_gpio>;
+	volume_up_gpio: pm8996_gpio2 {
+		pinconf {
+			pins = "gpio2";
+			function = "normal";
+			input-enable;
+			drive-push-pull;
+			bias-pull-up;
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+			power-source = <PM8994_GPIO_S4>; // 1.8V
+		};
+	};
 
-		button@0 {
-			label = "Volume Up";
-			linux,code = <KEY_VOLUMEUP>;
-			gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>;
+	divclk4_pin_a: divclk4 {
+		pinconf {
+			pins = "gpio18";
+			function = PMIC_GPIO_FUNC_FUNC2;
+
+			bias-disable;
+			power-source = <PM8994_GPIO_S4>;
 		};
 	};
 
-	rpm-glink {
-		rpm_requests {
-			pm8994-regulators {
-				vdd_l1-supply = <&pm8994_s3>;
-				vdd_l2_l26_l28-supply = <&pm8994_s3>;
-				vdd_l3_l11-supply = <&pm8994_s3>;
-				vdd_l4_l27_l31-supply = <&pm8994_s3>;
-				vdd_l5_l7-supply = <&pm8994_s5>;
-				vdd_l14_l15-supply = <&pm8994_s5>;
-				vdd_l20_l21-supply = <&pm8994_s5>;
-				vdd_l25-supply = <&pm8994_s3>;
-
-				s3 {
-					regulator-min-microvolt = <1300000>;
-					regulator-max-microvolt = <1300000>;
-				};
-
-				/**
-				 * 1.8v required on LS expansion
-				 * for mezzanine boards
-				 */
-				s4 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-				s5 {
-					regulator-min-microvolt = <2150000>;
-					regulator-max-microvolt = <2150000>;
-				};
-				s7 {
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <800000>;
-				};
-
-				l1 {
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-				};
-				l2 {
-					regulator-min-microvolt = <1250000>;
-					regulator-max-microvolt = <1250000>;
-				};
-				l3 {
-					regulator-min-microvolt = <850000>;
-					regulator-max-microvolt = <850000>;
-				};
-				l4 {
-					regulator-min-microvolt = <1225000>;
-					regulator-max-microvolt = <1225000>;
-				};
-				l6 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-				};
-				l8 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-				l9 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-				l10 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-				l11 {
-					regulator-min-microvolt = <1150000>;
-					regulator-max-microvolt = <1150000>;
-				};
-				l12 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-				l13 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <2950000>;
-				};
-				l14 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-				l15 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-				l16 {
-					regulator-min-microvolt = <2700000>;
-					regulator-max-microvolt = <2700000>;
-				};
-				l17 {
-					regulator-min-microvolt = <2500000>;
-					regulator-max-microvolt = <2500000>;
-				};
-				l18 {
-					regulator-min-microvolt = <2700000>;
-					regulator-max-microvolt = <2900000>;
-				};
-				l19 {
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-				};
-				l20 {
-					regulator-min-microvolt = <2950000>;
-					regulator-max-microvolt = <2950000>;
-					regulator-allow-set-load;
-				};
-				l21 {
-					regulator-min-microvolt = <2950000>;
-					regulator-max-microvolt = <2950000>;
-					regulator-allow-set-load;
-					regulator-system-load = <200000>;
-				};
-				l22 {
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-				};
-				l23 {
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-				l24 {
-					regulator-min-microvolt = <3075000>;
-					regulator-max-microvolt = <3075000>;
-				};
-				l25 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-allow-set-load;
-				};
-				l27 {
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-				};
-				l28 {
-					regulator-min-microvolt = <925000>;
-					regulator-max-microvolt = <925000>;
-					regulator-allow-set-load;
-				};
-				l29 {
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-				l30 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-				l32 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-			};
+	usb3_vbus_det_gpio: pm8996_gpio22 {
+		pinconf {
+			pins = "gpio22";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			input-enable;
+			bias-pull-down;
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+			power-source = <PM8994_GPIO_S4>; // 1.8V
 		};
 	};
 };
 
-&spmi_bus {
-	pmic@0 {
-		pon@800 {
-			resin {
-				compatible = "qcom,pm8941-resin";
-				interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
-				debounce = <15625>;
-				bias-pull-up;
-				linux,code = <KEY_VOLUMEDOWN>;
-			};
+&pm8994_mpps {
+	gpio-line-names =
+		"VDDPX_BIAS",
+		"WIFI_LED",
+		"NC",
+		"BT_LED",
+		"PM_MPP05",
+		"PM_MPP06",
+		"PM_MPP07",
+		"NC";
+};
+
+&pm8994_spmi_regulators {
+	qcom,saw-reg = <&saw3>;
+	s9 {
+		qcom,saw-slave;
+	};
+	s10 {
+		qcom,saw-slave;
+	};
+	s11 {
+		qcom,saw-leader;
+		regulator-always-on;
+		regulator-min-microvolt = <1230000>;
+		regulator-max-microvolt = <1230000>;
+	};
+};
+
+&pmi8994_gpios {
+	gpio-line-names =
+		"NC",
+		"SPKR_AMP_EN1",
+		"SPKR_AMP_EN2",
+		"TP61",
+		"NC",
+		"USB2_VBUS_DET",
+		"NC",
+		"NC",
+		"NC",
+		"NC";
+
+	usb2_vbus_det_gpio: pmi8996_gpio6 {
+		pinconf {
+			pins = "gpio6";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			input-enable;
+			bias-pull-down;
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+			power-source = <PM8994_GPIO_S4>; // 1.8V
 		};
 	};
 };
 
+&rpm_requests {
+	pm8994-regulators {
+		compatible = "qcom,rpm-pm8994-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+		vdd_s7-supply = <&vph_pwr>;
+		vdd_s8-supply = <&vph_pwr>;
+		vdd_s9-supply = <&vph_pwr>;
+		vdd_s10-supply = <&vph_pwr>;
+		vdd_s11-supply = <&vph_pwr>;
+		vdd_s12-supply = <&vph_pwr>;
+		vdd_l2_l26_l28-supply = <&vreg_s3a_1p3>;
+		vdd_l3_l11-supply = <&vreg_s8a_l3a_input>;
+		vdd_l4_l27_l31-supply = <&vreg_s3a_1p3>;
+		vdd_l5_l7-supply = <&vreg_s5a_2p15>;
+		vdd_l6_l12_l32-supply = <&vreg_s5a_2p15>;
+		vdd_l8_l16_l30-supply = <&vph_pwr>;
+		vdd_l14_l15-supply = <&vreg_s5a_2p15>;
+		vdd_l25-supply = <&vreg_s3a_1p3>;
+		vdd_lvs1_2-supply = <&vreg_s4a_1p8>;
+
+		vreg_s3a_1p3: s3 {
+			regulator-name = "vreg_s3a_1p3";
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		/**
+		 * 1.8v required on LS expansion
+		 * for mezzanine boards
+		 */
+		vreg_s4a_1p8: s4 {
+			regulator-name = "vreg_s4a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+		vreg_s5a_2p15: s5 {
+			regulator-name = "vreg_s5a_2p15";
+			regulator-min-microvolt = <2150000>;
+			regulator-max-microvolt = <2150000>;
+		};
+		vreg_s7a_1p0: s7 {
+			regulator-name = "vreg_s7a_1p0";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		vreg_l1a_1p0: l1 {
+			regulator-name = "vreg_l1a_1p0";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+		vreg_l2a_1p25: l2 {
+			regulator-name = "vreg_l2a_1p25";
+			regulator-min-microvolt = <1250000>;
+			regulator-max-microvolt = <1250000>;
+		};
+		vreg_l3a_0p875: l3 {
+			regulator-name = "vreg_l3a_0p875";
+			regulator-min-microvolt = <850000>;
+			regulator-max-microvolt = <850000>;
+		};
+		vreg_l4a_1p225: l4 {
+			regulator-name = "vreg_l4a_1p225";
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+		vreg_l6a_1p2: l6 {
+			regulator-name = "vreg_l6a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+		vreg_l8a_1p8: l8 {
+			regulator-name = "vreg_l8a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l9a_1p8: l9 {
+			regulator-name = "vreg_l9a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l10a_1p8: l10 {
+			regulator-name = "vreg_l10a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l11a_1p15: l11 {
+			regulator-name = "vreg_l11a_1p15";
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
+		};
+		vreg_l12a_1p8: l12 {
+			regulator-name = "vreg_l12a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l13a_2p95: l13 {
+			regulator-name = "vreg_l13a_2p95";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+		vreg_l14a_1p8: l14 {
+			regulator-name = "vreg_l14a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l15a_1p8: l15 {
+			regulator-name = "vreg_l15a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l16a_2p7: l16 {
+			regulator-name = "vreg_l16a_2p7";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+		vreg_l17a_2p8: l17 {
+			regulator-name = "vreg_l17a_2p8";
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2500000>;
+		};
+		vreg_l18a_2p85: l18 {
+			regulator-name = "vreg_l18a_2p85";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2900000>;
+		};
+		vreg_l19a_2p8: l19 {
+			regulator-name = "vreg_l19a_2p8";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+		vreg_l20a_2p95: l20 {
+			regulator-name = "vreg_l20a_2p95";
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+		};
+		vreg_l21a_2p95: l21 {
+			regulator-name = "vreg_l21a_2p95";
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+			regulator-system-load = <200000>;
+		};
+		vreg_l22a_3p0: l22 {
+			regulator-name = "vreg_l22a_3p0";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+		vreg_l23a_2p8: l23 {
+			regulator-name = "vreg_l23a_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+		vreg_l24a_3p075: l24 {
+			regulator-name = "vreg_l24a_3p075";
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+		vreg_l25a_1p2: l25 {
+			regulator-name = "vreg_l25a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-allow-set-load;
+		};
+		vreg_l26a_0p8: l27 {
+			regulator-name = "vreg_l26a_0p8";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+		vreg_l28a_0p925: l28 {
+			regulator-name = "vreg_l28a_0p925";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <925000>;
+			regulator-allow-set-load;
+		};
+		vreg_l29a_2p8: l29 {
+			regulator-name = "vreg_l29a_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+		vreg_l30a_1p8: l30 {
+			regulator-name = "vreg_l30a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l32a_1p8: l32 {
+			regulator-name = "vreg_l32a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_lvs1a_1p8: lvs1 {
+			regulator-name = "vreg_lvs1a_1p8";
+		};
+
+		vreg_lvs2a_1p8: lvs2 {
+			regulator-name = "vreg_lvs2a_1p8";
+		};
+	};
+};
+
+&sdhc2 {
+	/* External SD card */
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
+	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
+	cd-gpios = <&msmgpio 38 0x1>;
+	vmmc-supply = <&vreg_l21a_2p95>;
+	vqmmc-supply = <&vreg_l13a_2p95>;
+	status = "okay";
+};
+
 &sound {
 	compatible = "qcom,apq8096-sndcard";
 	model = "DB820c";
@@ -754,3 +979,84 @@
 		};
 	};
 };
+
+&spmi_bus {
+	pmic@0 {
+		pon@800 {
+			resin {
+				compatible = "qcom,pm8941-resin";
+				interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				linux,code = <KEY_VOLUMEDOWN>;
+			};
+		};
+	};
+};
+
+&ufsphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l28a_0p925>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+
+	vdda-phy-max-microamp = <18380>;
+	vdda-pll-max-microamp = <9440>;
+
+	vddp-ref-clk-supply = <&vreg_l25a_1p2>;
+	vddp-ref-clk-max-microamp = <100>;
+	vddp-ref-clk-always-on;
+};
+
+&ufshc {
+	status = "okay";
+
+	vcc-supply = <&vreg_l20a_2p95>;
+	vccq-supply = <&vreg_l25a_1p2>;
+	vccq2-supply = <&vreg_s4a_1p8>;
+
+	vcc-max-microamp = <600000>;
+	vccq-max-microamp = <450000>;
+	vccq2-max-microamp = <450000>;
+};
+
+&usb2 {
+	status = "okay";
+	extcon = <&usb2_id>;
+
+	dwc3@7600000 {
+		extcon = <&usb2_id>;
+		dr_mode = "otg";
+		maximum-speed = "high-speed";
+	};
+};
+
+&usb3 {
+	status = "okay";
+	extcon = <&usb3_id>;
+
+	dwc3@6a00000 {
+		extcon = <&usb3_id>;
+		dr_mode = "otg";
+	};
+};
+
+&usb3phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l28a_0p925>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+
+};
+
+&wcd9335 {
+	clock-names = "mclk", "slimbus";
+	clocks = <&div1_mclk>,
+		 <&rpmcc RPM_SMD_BB_CLK1>;
+
+	vdd-buck-supply = <&vreg_s4a_1p8>;
+	vdd-buck-sido-supply = <&vreg_s4a_1p8>;
+	vdd-tx-supply = <&vreg_s4a_1p8>;
+	vdd-rx-supply = <&vreg_s4a_1p8>;
+	vdd-io-supply = <&vreg_s4a_1p8>;
+};
diff --git a/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts b/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts
new file mode 100644
index 000000000000..f6ddf17ada81
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts
@@ -0,0 +1,385 @@
+// SPDX-License-Identifier: BSD-3-Clause
+
+/dts-v1/;
+
+#include "msm8996.dtsi"
+#include "pm8994.dtsi"
+#include "pmi8994.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+	model = "Inforce 6640 Single Board Computer";
+	compatible = "inforce,ifc6640", "qcom,apq8096-sbc", "qcom,apq8096";
+
+	qcom,msm-id = <291 0x00030001>;
+	qcom,board-id = <0x00010018 0>;
+
+	aliases {
+		serial0 = &blsp2_uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	v1p05: v1p05-regulator {
+		compatible = "regulator-fixed";
+		reglator-name = "v1p05";
+		regulator-always-on;
+		regulator-boot-on;
+
+		regulator-min-microvolt = <1050000>;
+		regulator-max-microvolt = <1050000>;
+
+		vin-supply = <&v5p0>;
+	};
+
+	v12_poe: v12-poe-regulator {
+		compatible = "regulator-fixed";
+		reglator-name = "v12_poe";
+		regulator-always-on;
+		regulator-boot-on;
+
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	v3p3: v3p3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "v3p3";
+		regulator-always-on;
+		regulator-boot-on;
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		vin-supply = <&v12_poe>;
+	};
+
+	v5p0: v5p0-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "v5p0";
+		regulator-always-on;
+		regulator-boot-on;
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		vin-supply = <&v12_poe>;
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-always-on;
+		regulator-boot-on;
+
+		regulator-min-microvolt = <3800000>;
+		regulator-max-microvolt = <3800000>;
+	};
+};
+
+&blsp2_uart1 {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&blsp2_uart1_2pins_default>;
+	pinctrl-1 = <&blsp2_uart1_2pins_sleep>;
+};
+
+&msmgpio {
+	sdc2_pins_default: sdc2-pins-default {
+		clk {
+			pins = "sdc2_clk";
+			bias-disable;
+			drive-strength = <16>;
+		};
+
+		cmd {
+			pins = "sdc2_cmd";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+
+		data {
+			pins = "sdc2_data";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+
+		cd {
+			pins = "gpio38";
+			function = "gpio";
+
+			bias-pull-up;
+			drive-strength = <16>;
+		};
+	};
+
+	sdc2_pins_sleep: sdc2-pins-sleep {
+		clk {
+			pins = "sdc2_clk";
+			bias-disable;
+			drive-strength = <2>;
+		};
+
+		cmd {
+			pins = "sdc2_cmd";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		data {
+			pins = "sdc2_data";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		cd {
+			pins = "gpio38";
+			function = "gpio";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+	};
+};
+
+&rpm_requests {
+	pm8994-regulators {
+		compatible = "qcom,rpm-pm8994-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+		vdd_s7-supply = <&vph_pwr>;
+		vdd_s8-supply = <&vph_pwr>;
+		vdd_s9-supply = <&vph_pwr>;
+		vdd_s10-supply = <&vph_pwr>;
+		vdd_s11-supply = <&vph_pwr>;
+		vdd_s12-supply = <&vph_pwr>;
+		vdd_l2_l26_l28-supply = <&vreg_s3a_1p3>;
+		vdd_l3_l11-supply = <&vreg_s3a_1p3>;
+		vdd_l4_l27_l31-supply = <&vreg_s3a_1p3>;
+		vdd_l5_l7-supply = <&vreg_s5a_2p15>;
+		vdd_l6_l12_l32-supply = <&vreg_s5a_2p15>;
+		vdd_l8_l16_l30-supply = <&vph_pwr>;
+		vdd_l25-supply = <&vreg_s3a_1p3>;
+		vdd_lvs1_2-supply = <&vreg_s4a_1p8>;
+
+		vreg_s3a_1p3: s3 {
+			regulator-name = "vreg_s3a_1p3";
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		vreg_s4a_1p8: s4 {
+			regulator-name = "vreg_s4a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+		vreg_s5a_2p15: s5 {
+			regulator-name = "vreg_s5a_2p15";
+			regulator-min-microvolt = <2150000>;
+			regulator-max-microvolt = <2150000>;
+		};
+		vreg_s7a_1p0: s7 {
+			regulator-name = "vreg_s7a_1p0";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		vreg_l1a_1p0: l1 {
+			regulator-name = "vreg_l1a_1p0";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+		vreg_l2a_1p25: l2 {
+			regulator-name = "vreg_l2a_1p25";
+			regulator-min-microvolt = <1250000>;
+			regulator-max-microvolt = <1250000>;
+		};
+		vreg_l3a_0p875: l3 {
+			regulator-name = "vreg_l3a_0p875";
+			regulator-min-microvolt = <850000>;
+			regulator-max-microvolt = <850000>;
+		};
+		vreg_l4a_1p225: l4 {
+			regulator-name = "vreg_l4a_1p225";
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+		vreg_l6a_1p2: l6 {
+			regulator-name = "vreg_l6a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+		vreg_l8a_1p8: l8 {
+			regulator-name = "vreg_l8a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l9a_1p8: l9 {
+			regulator-name = "vreg_l9a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l10a_1p8: l10 {
+			regulator-name = "vreg_l10a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l11a_1p15: l11 {
+			regulator-name = "vreg_l11a_1p15";
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
+		};
+		vreg_l12a_1p8: l12 {
+			regulator-name = "vreg_l12a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l13a_2p95: l13 {
+			regulator-name = "vreg_l13a_2p95";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+		vreg_l14a_1p8: l14 {
+			regulator-name = "vreg_l14a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l15a_1p8: l15 {
+			regulator-name = "vreg_l15a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l16a_2p7: l16 {
+			regulator-name = "vreg_l16a_2p7";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+		vreg_l17a_2p8: l17 {
+			regulator-name = "vreg_l17a_2p8";
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2500000>;
+		};
+		vreg_l18a_2p85: l18 {
+			regulator-name = "vreg_l18a_2p85";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2900000>;
+		};
+		vreg_l19a_2p8: l19 {
+			regulator-name = "vreg_l19a_2p8";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+		vreg_l20a_2p95: l20 {
+			regulator-name = "vreg_l20a_2p95";
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+		};
+		vreg_l21a_2p95: l21 {
+			regulator-name = "vreg_l21a_2p95";
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+		vreg_l22a_3p0: l22 {
+			regulator-name = "vreg_l22a_3p0";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+		vreg_l23a_2p8: l23 {
+			regulator-name = "vreg_l23a_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+		vreg_l24a_3p075: l24 {
+			regulator-name = "vreg_l24a_3p075";
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+		vreg_l25a_1p2: l25 {
+			regulator-name = "vreg_l25a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-allow-set-load;
+		};
+		vreg_l26a_0p8: l27 {
+			regulator-name = "vreg_l26a_0p8";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+		vreg_l28a_0p925: l28 {
+			regulator-name = "vreg_l28a_0p925";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <925000>;
+			regulator-allow-set-load;
+		};
+		vreg_l29a_2p8: l29 {
+			regulator-name = "vreg_l29a_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+		vreg_l30a_1p8: l30 {
+			regulator-name = "vreg_l30a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l32a_1p8: l32 {
+			regulator-name = "vreg_l32a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_lvs1a_1p8: lvs1 {
+			regulator-name = "vreg_lvs1a_1p8";
+		};
+
+		vreg_lvs2a_1p8: lvs2 {
+			regulator-name = "vreg_lvs2a_1p8";
+		};
+	};
+};
+
+&sdhc2 {
+	status = "okay";
+
+	bus-width = <4>;
+
+	cd-gpios = <&msmgpio 38 0x1>;
+
+	vmmc-supply = <&vreg_l21a_2p95>;
+	vqmmc-supply = <&vreg_l13a_2p95>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_pins_default>;
+	pinctrl-1 = <&sdc2_pins_sleep>;
+};
+
+&ufshc {
+	status = "okay";
+
+	vcc-supply = <&vreg_l20a_2p95>;
+	vccq-supply = <&vreg_l25a_1p2>;
+	vccq2-supply = <&vreg_s4a_1p8>;
+
+	vcc-max-microamp = <600000>;
+	vccq-max-microamp = <450000>;
+	vccq2-max-microamp = <450000>;
+};
+
+&ufsphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l28a_0p925>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+
+	vdda-phy-max-microamp = <18380>;
+	vdda-pll-max-microamp = <9440>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 8686e101905c..9f31064f2374 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -102,10 +102,11 @@
 			reg = <0x0>;
 			next-level-cache = <&L2_0>;
 			enable-method = "psci";
-			cpu-idle-states = <&CPU_SLEEP_0>;
 			clocks = <&apcs>;
 			operating-points-v2 = <&cpu_opp_table>;
 			#cooling-cells = <2>;
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
 		};
 
 		CPU1: cpu@1 {
@@ -114,10 +115,11 @@
 			reg = <0x1>;
 			next-level-cache = <&L2_0>;
 			enable-method = "psci";
-			cpu-idle-states = <&CPU_SLEEP_0>;
 			clocks = <&apcs>;
 			operating-points-v2 = <&cpu_opp_table>;
 			#cooling-cells = <2>;
+			power-domains = <&CPU_PD1>;
+			power-domain-names = "psci";
 		};
 
 		CPU2: cpu@2 {
@@ -126,10 +128,11 @@
 			reg = <0x2>;
 			next-level-cache = <&L2_0>;
 			enable-method = "psci";
-			cpu-idle-states = <&CPU_SLEEP_0>;
 			clocks = <&apcs>;
 			operating-points-v2 = <&cpu_opp_table>;
 			#cooling-cells = <2>;
+			power-domains = <&CPU_PD2>;
+			power-domain-names = "psci";
 		};
 
 		CPU3: cpu@3 {
@@ -138,10 +141,11 @@
 			reg = <0x3>;
 			next-level-cache = <&L2_0>;
 			enable-method = "psci";
-			cpu-idle-states = <&CPU_SLEEP_0>;
 			clocks = <&apcs>;
 			operating-points-v2 = <&cpu_opp_table>;
 			#cooling-cells = <2>;
+			power-domains = <&CPU_PD3>;
+			power-domain-names = "psci";
 		};
 
 		L2_0: l2-cache {
@@ -161,12 +165,57 @@
 				min-residency-us = <2000>;
 				local-timer-stop;
 			};
+
+			CLUSTER_RET: cluster-retention {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x41000012>;
+				entry-latency-us = <500>;
+				exit-latency-us = <500>;
+				min-residency-us = <2000>;
+			};
+
+			CLUSTER_PWRDN: cluster-gdhs {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x41000032>;
+				entry-latency-us = <2000>;
+				exit-latency-us = <2000>;
+				min-residency-us = <6000>;
+			};
 		};
 	};
 
 	psci {
 		compatible = "arm,psci-1.0";
 		method = "smc";
+
+		CPU_PD0: cpu-pd0 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&CPU_SLEEP_0>;
+		};
+
+		CPU_PD1: cpu-pd1 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&CPU_SLEEP_0>;
+		};
+
+		CPU_PD2: cpu-pd2 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&CPU_SLEEP_0>;
+		};
+
+		CPU_PD3: cpu-pd3 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&CPU_SLEEP_0>;
+		};
+
+		CLUSTER_PD: cluster-pd {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_RET>, <&CLUSTER_PWRDN>;
+		};
 	};
 
 	pmu {
@@ -429,7 +478,8 @@
 			compatible = "qcom,msm8916-apcs-kpss-global", "syscon";
 			reg = <0xb011000 0x1000>;
 			#mbox-cells = <1>;
-			clocks = <&a53pll>;
+			clocks = <&a53pll>, <&gcc GPLL0_VOTE>;
+			clock-names = "pll", "aux";
 			#clock-cells = <0>;
 		};
 
@@ -816,6 +866,8 @@
 			nvmem-cells = <&tsens_caldata>, <&tsens_calsel>;
 			nvmem-cell-names = "calib", "calib_sel";
 			#qcom,sensors = <5>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow";
 			#thermal-sensor-cells = <1>;
 		};
 
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 4ca2e7b44559..7ae082ea14ea 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -16,72 +16,19 @@
 
 	chosen { };
 
-	memory {
-		device_type = "memory";
-		/* We expect the bootloader to fill in the reg */
-		reg = <0 0 0 0>;
-	};
-
-	reserved-memory {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		mba_region: mba@91500000 {
-			reg = <0x0 0x91500000 0x0 0x200000>;
-			no-map;
-		};
-
-		slpi_region: slpi@90b00000 {
-			reg = <0x0 0x90b00000 0x0 0xa00000>;
-			no-map;
-		};
-
-		venus_region: venus@90400000 {
-			reg = <0x0 0x90400000 0x0 0x700000>;
-			no-map;
-		};
-
-		adsp_region: adsp@8ea00000 {
-			reg = <0x0 0x8ea00000 0x0 0x1a00000>;
-			no-map;
-		};
-
-		mpss_region: mpss@88800000 {
-			reg = <0x0 0x88800000 0x0 0x6200000>;
-			no-map;
-		};
-
-		smem_mem: smem-mem@86000000 {
-			reg = <0x0 0x86000000 0x0 0x200000>;
-			no-map;
-		};
-
-		memory@85800000 {
-			reg = <0x0 0x85800000 0x0 0x800000>;
-			no-map;
-		};
-
-		memory@86200000 {
-			reg = <0x0 0x86200000 0x0 0x2600000>;
-			no-map;
-		};
-
-		rmtfs@86700000 {
-			compatible = "qcom,rmtfs-mem";
-
-			size = <0x0 0x200000>;
-			alloc-ranges = <0x0 0xa0000000 0x0 0x2000000>;
-			no-map;
-
-			qcom,client-id = <1>;
-			qcom,vmid = <15>;
+	clocks {
+		xo_board: xo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+			clock-output-names = "xo_board";
 		};
 
-		zap_shader_region: gpu@8f200000 {
-			compatible = "shared-dma-pool";
-			reg = <0x0 0x90b00000 0x0 0xa00000>;
-			no-map;
+		sleep_clk: sleep_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32764>;
+			clock-output-names = "sleep_clk";
 		};
 	};
 
@@ -173,291 +120,93 @@
 		};
 	};
 
-	thermal-zones {
-		cpu0-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens0 3>;
-
-			trips {
-				cpu0_alert0: trip-point@0 {
-					temperature = <75000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				cpu0_crit: cpu_crit {
-					temperature = <110000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-		};
-
-		cpu1-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens0 5>;
-
-			trips {
-				cpu1_alert0: trip-point@0 {
-					temperature = <75000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				cpu1_crit: cpu_crit {
-					temperature = <110000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-		};
-
-		cpu2-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens0 8>;
-
-			trips {
-				cpu2_alert0: trip-point@0 {
-					temperature = <75000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				cpu2_crit: cpu_crit {
-					temperature = <110000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-		};
-
-		cpu3-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens0 10>;
-
-			trips {
-				cpu3_alert0: trip-point@0 {
-					temperature = <75000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				cpu3_crit: cpu_crit {
-					temperature = <110000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-		};
-
-		gpu-thermal-top {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens1 6>;
-
-			trips {
-				gpu1_alert0: trip-point@0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
+	firmware {
+		scm {
+			compatible = "qcom,scm-msm8996";
+			qcom,dload-mode = <&tcsr 0x13000>;
 		};
+	};
 
-		gpu-thermal-bottom {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens1 7>;
+	tcsr_mutex: hwlock {
+		compatible = "qcom,tcsr-mutex";
+		syscon = <&tcsr_mutex_regs 0 0x1000>;
+		#hwlock-cells = <1>;
+	};
 
-			trips {
-				gpu2_alert0: trip-point@0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
+	memory {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the reg */
+		reg = <0 0 0 0>;
+	};
 
-		m4m-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
 
-			thermal-sensors = <&tsens0 1>;
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
 
-			trips {
-				m4m_alert0: trip-point@0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
+		mba_region: mba@91500000 {
+			reg = <0x0 0x91500000 0x0 0x200000>;
+			no-map;
 		};
 
-		l3-or-venus-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens0 2>;
-
-			trips {
-				l3_or_venus_alert0: trip-point@0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
+		slpi_region: slpi@90b00000 {
+			reg = <0x0 0x90b00000 0x0 0xa00000>;
+			no-map;
 		};
 
-		cluster0-l2-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens0 7>;
-
-			trips {
-				cluster0_l2_alert0: trip-point@0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
+		venus_region: venus@90400000 {
+			reg = <0x0 0x90400000 0x0 0x700000>;
+			no-map;
 		};
 
-		cluster1-l2-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens0 12>;
-
-			trips {
-				cluster1_l2_alert0: trip-point@0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
+		adsp_region: adsp@8ea00000 {
+			reg = <0x0 0x8ea00000 0x0 0x1a00000>;
+			no-map;
 		};
 
-		camera-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens1 1>;
-
-			trips {
-				camera_alert0: trip-point@0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
+		mpss_region: mpss@88800000 {
+			reg = <0x0 0x88800000 0x0 0x6200000>;
+			no-map;
 		};
 
-		q6-dsp-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens1 2>;
-
-			trips {
-				q6_dsp_alert0: trip-point@0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
+		smem_mem: smem-mem@86000000 {
+			reg = <0x0 0x86000000 0x0 0x200000>;
+			no-map;
 		};
 
-		mem-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens1 3>;
-
-			trips {
-				mem_alert0: trip-point@0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
+		memory@85800000 {
+			reg = <0x0 0x85800000 0x0 0x800000>;
+			no-map;
 		};
 
-		modemtx-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens1 4>;
-
-			trips {
-				modemtx_alert0: trip-point@0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
+		memory@86200000 {
+			reg = <0x0 0x86200000 0x0 0x2600000>;
+			no-map;
 		};
-	};
 
-	timer {
-		compatible = "arm,armv8-timer";
-		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
-	};
+		rmtfs@86700000 {
+			compatible = "qcom,rmtfs-mem";
 
-	clocks {
-		xo_board: xo_board {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <19200000>;
-			clock-output-names = "xo_board";
-		};
+			size = <0x0 0x200000>;
+			alloc-ranges = <0x0 0xa0000000 0x0 0x2000000>;
+			no-map;
 
-		sleep_clk: sleep_clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32764>;
-			clock-output-names = "sleep_clk";
+			qcom,client-id = <1>;
+			qcom,vmid = <15>;
 		};
-	};
-
-	psci {
-		compatible = "arm,psci-1.0";
-		method = "smc";
-	};
-
-	firmware {
-		scm {
-			compatible = "qcom,scm-msm8996";
 
-			qcom,dload-mode = <&tcsr 0x13000>;
+		zap_shader_region: gpu@8f200000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x90b00000 0x0 0xa00000>;
+			no-map;
 		};
 	};
 
-	tcsr_mutex: hwlock {
-		compatible = "qcom,tcsr-mutex";
-		syscon = <&tcsr_mutex_regs 0 0x1000>;
-		#hwlock-cells = <1>;
-	};
-
-	smem {
-		compatible = "qcom,smem";
-		memory-region = <&smem_mem>;
-		hwlocks = <&tcsr_mutex 3>;
-	};
-
 	rpm-glink {
 		compatible = "qcom,glink-rpm";
 
@@ -467,7 +216,7 @@
 
 		mboxes = <&apcs_glb 0>;
 
-		rpm_requests {
+		rpm_requests: rpm-requests {
 			compatible = "qcom,rpm-msm8996";
 			qcom,glink-channels = "rpm_requests";
 
@@ -509,57 +258,83 @@
 					};
 				};
 			};
+		};
+	};
 
-			pm8994-regulators {
-				compatible = "qcom,rpm-pm8994-regulators";
-
-				pm8994_s1: s1 {};
-				pm8994_s2: s2 {};
-				pm8994_s3: s3 {};
-				pm8994_s4: s4 {};
-				pm8994_s5: s5 {};
-				pm8994_s6: s6 {};
-				pm8994_s7: s7 {};
-				pm8994_s8: s8 {};
-				pm8994_s9: s9 {};
-				pm8994_s10: s10 {};
-				pm8994_s11: s11 {};
-				pm8994_s12: s12 {};
-
-				pm8994_l1: l1 {};
-				pm8994_l2: l2 {};
-				pm8994_l3: l3 {};
-				pm8994_l4: l4 {};
-				pm8994_l5: l5 {};
-				pm8994_l6: l6 {};
-				pm8994_l7: l7 {};
-				pm8994_l8: l8 {};
-				pm8994_l9: l9 {};
-				pm8994_l10: l10 {};
-				pm8994_l11: l11 {};
-				pm8994_l12: l12 {};
-				pm8994_l13: l13 {};
-				pm8994_l14: l14 {};
-				pm8994_l15: l15 {};
-				pm8994_l16: l16 {};
-				pm8994_l17: l17 {};
-				pm8994_l18: l18 {};
-				pm8994_l19: l19 {};
-				pm8994_l20: l20 {};
-				pm8994_l21: l21 {};
-				pm8994_l22: l22 {};
-				pm8994_l23: l23 {};
-				pm8994_l24: l24 {};
-				pm8994_l25: l25 {};
-				pm8994_l26: l26 {};
-				pm8994_l27: l27 {};
-				pm8994_l28: l28 {};
-				pm8994_l29: l29 {};
-				pm8994_l30: l30 {};
-				pm8994_l31: l31 {};
-				pm8994_l32: l32 {};
-			};
+	smem {
+		compatible = "qcom,smem";
+		memory-region = <&smem_mem>;
+		hwlocks = <&tcsr_mutex 3>;
+	};
+
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+
+		interrupts = <0 158 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apcs_glb 10>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		smp2p_adsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
 
+		smp2p_adsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-modem {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+
+		interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apcs_glb 14>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		modem_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-slpi {
+		compatible = "qcom,smp2p";
+		qcom,smem = <481>, <430>;
+
+		interrupts = <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apcs_glb 26>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <3>;
+
+		smp2p_slpi_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		smp2p_slpi_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
 		};
 	};
 
@@ -569,9 +344,90 @@
 		ranges = <0 0 0 0xffffffff>;
 		compatible = "simple-bus";
 
+		pcie_phy: phy@34000 {
+			compatible = "qcom,msm8996-qmp-pcie-phy";
+			reg = <0x00034000 0x488>;
+			#clock-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
+				<&gcc GCC_PCIE_PHY_CFG_AHB_CLK>,
+				<&gcc GCC_PCIE_CLKREF_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_PCIE_PHY_BCR>,
+				<&gcc GCC_PCIE_PHY_COM_BCR>,
+				<&gcc GCC_PCIE_PHY_COM_NOCSR_BCR>;
+			reset-names = "phy", "common", "cfg";
+			status = "disabled";
+
+			pciephy_0: lane@35000 {
+				reg = <0x00035000 0x130>,
+				      <0x00035200 0x200>,
+				      <0x00035400 0x1dc>;
+				#phy-cells = <0>;
+
+				clock-output-names = "pcie_0_pipe_clk_src";
+				clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
+				clock-names = "pipe0";
+				resets = <&gcc GCC_PCIE_0_PHY_BCR>;
+				reset-names = "lane0";
+			};
+
+			pciephy_1: lane@36000 {
+				reg = <0x00036000 0x130>,
+				      <0x00036200 0x200>,
+				      <0x00036400 0x1dc>;
+				#phy-cells = <0>;
+
+				clock-output-names = "pcie_1_pipe_clk_src";
+				clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
+				clock-names = "pipe1";
+				resets = <&gcc GCC_PCIE_1_PHY_BCR>;
+				reset-names = "lane1";
+			};
+
+			pciephy_2: lane@37000 {
+				reg = <0x00037000 0x130>,
+				      <0x00037200 0x200>,
+				      <0x00037400 0x1dc>;
+				#phy-cells = <0>;
+
+				clock-output-names = "pcie_2_pipe_clk_src";
+				clocks = <&gcc GCC_PCIE_2_PIPE_CLK>;
+				clock-names = "pipe2";
+				resets = <&gcc GCC_PCIE_2_PHY_BCR>;
+				reset-names = "lane2";
+			};
+		};
+
 		rpm_msg_ram: memory@68000 {
 			compatible = "qcom,rpm-msg-ram";
-			reg = <0x68000 0x6000>;
+			reg = <0x00068000 0x6000>;
+		};
+
+		qfprom@74000 {
+			compatible = "qcom,qfprom";
+			reg = <0x00074000 0x8ff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			qusb2p_hstx_trim: hstx_trim@24e {
+				reg = <0x24e 0x2>;
+				bits = <5 4>;
+			};
+
+			qusb2s_hstx_trim: hstx_trim@24f {
+				reg = <0x24f 0x1>;
+				bits = <1 4>;
+			};
+
+			gpu_speed_bin: gpu_speed_bin@133 {
+				reg = <0x133 0x1>;
+				bits = <5 3>;
+			};
 		};
 
 		rng: rng@83000 {
@@ -581,60 +437,790 @@
 			clock-names = "core";
 		};
 
-		tcsr_mutex_regs: syscon@740000 {
-			compatible = "syscon";
-			reg = <0x740000 0x20000>;
+		gcc: clock-controller@300000 {
+			compatible = "qcom,gcc-msm8996";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			reg = <0x00300000 0x90000>;
 		};
 
 		tsens0: thermal-sensor@4a9000 {
 			compatible = "qcom,msm8996-tsens";
-			reg = <0x4a9000 0x1000>, /* TM */
-			      <0x4a8000 0x1000>; /* SROT */
+			reg = <0x004a9000 0x1000>, /* TM */
+			      <0x004a8000 0x1000>; /* SROT */
 			#qcom,sensors = <13>;
-			interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "uplow";
+			interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
 			#thermal-sensor-cells = <1>;
 		};
 
 		tsens1: thermal-sensor@4ad000 {
 			compatible = "qcom,msm8996-tsens";
-			reg = <0x4ad000 0x1000>, /* TM */
-			      <0x4ac000 0x1000>; /* SROT */
+			reg = <0x004ad000 0x1000>, /* TM */
+			      <0x004ac000 0x1000>; /* SROT */
 			#qcom,sensors = <8>;
-			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "uplow";
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
 			#thermal-sensor-cells = <1>;
 		};
 
+		tcsr_mutex_regs: syscon@740000 {
+			compatible = "syscon";
+			reg = <0x00740000 0x20000>;
+		};
+
 		tcsr: syscon@7a0000 {
 			compatible = "qcom,tcsr-msm8996", "syscon";
-			reg = <0x7a0000 0x18000>;
+			reg = <0x007a0000 0x18000>;
 		};
 
-		intc: interrupt-controller@9bc0000 {
-			compatible = "qcom,msm8996-gic-v3", "arm,gic-v3";
-			#interrupt-cells = <3>;
+		mmcc: clock-controller@8c0000 {
+			compatible = "qcom,mmcc-msm8996";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			reg = <0x008c0000 0x40000>;
+			assigned-clocks = <&mmcc MMPLL9_PLL>,
+					  <&mmcc MMPLL1_PLL>,
+					  <&mmcc MMPLL3_PLL>,
+					  <&mmcc MMPLL4_PLL>,
+					  <&mmcc MMPLL5_PLL>;
+			assigned-clock-rates = <624000000>,
+					       <810000000>,
+					       <980000000>,
+					       <960000000>,
+					       <825000000>;
+		};
+
+		mdss: mdss@900000 {
+			compatible = "qcom,mdss";
+
+			reg = <0x00900000 0x1000>,
+			      <0x009b0000 0x1040>,
+			      <0x009b8000 0x1040>;
+			reg-names = "mdss_phys",
+				    "vbif_phys",
+				    "vbif_nrt_phys";
+
+			power-domains = <&mmcc MDSS_GDSC>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+
 			interrupt-controller;
-			#redistributor-regions = <1>;
-			redistributor-stride = <0x0 0x40000>;
-			reg = <0x09bc0000 0x10000>,
-			      <0x09c00000 0x100000>;
-			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+
+			clocks = <&mmcc MDSS_AHB_CLK>;
+			clock-names = "iface";
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			mdp: mdp@901000 {
+				compatible = "qcom,mdp5";
+				reg = <0x00901000 0x90000>;
+				reg-names = "mdp_phys";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&mmcc MDSS_AHB_CLK>,
+					 <&mmcc MDSS_AXI_CLK>,
+					 <&mmcc MDSS_MDP_CLK>,
+					 <&mmcc SMMU_MDP_AXI_CLK>,
+					 <&mmcc MDSS_VSYNC_CLK>;
+				clock-names = "iface",
+					      "bus",
+					      "core",
+					      "iommu",
+					      "vsync";
+
+				iommus = <&mdp_smmu 0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdp5_intf3_out: endpoint {
+							remote-endpoint = <&hdmi_in>;
+						};
+					};
+				};
+			};
+
+			hdmi: hdmi-tx@9a0000 {
+				compatible = "qcom,hdmi-tx-8996";
+				reg =	<0x009a0000 0x50c>,
+					<0x00070000 0x6158>,
+					<0x009e0000 0xfff>;
+				reg-names = "core_physical",
+					    "qfprom_physical",
+					    "hdcp_physical";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&mmcc MDSS_MDP_CLK>,
+					 <&mmcc MDSS_AHB_CLK>,
+					 <&mmcc MDSS_HDMI_CLK>,
+					 <&mmcc MDSS_HDMI_AHB_CLK>,
+					 <&mmcc MDSS_EXTPCLK_CLK>;
+				clock-names =
+					"mdp_core",
+					"iface",
+					"core",
+					"alt_iface",
+					"extp";
+
+				phys = <&hdmi_phy>;
+				phy-names = "hdmi_phy";
+				#sound-dai-cells = <1>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						hdmi_in: endpoint {
+							remote-endpoint = <&mdp5_intf3_out>;
+						};
+					};
+				};
+			};
+
+			hdmi_phy: hdmi-phy@9a0600 {
+				#phy-cells = <0>;
+				compatible = "qcom,hdmi-phy-8996";
+				reg = <0x009a0600 0x1c4>,
+				      <0x009a0a00 0x124>,
+				      <0x009a0c00 0x124>,
+				      <0x009a0e00 0x124>,
+				      <0x009a1000 0x124>,
+				      <0x009a1200 0x0c8>;
+				reg-names = "hdmi_pll",
+					    "hdmi_tx_l0",
+					    "hdmi_tx_l1",
+					    "hdmi_tx_l2",
+					    "hdmi_tx_l3",
+					    "hdmi_phy";
+
+				clocks = <&mmcc MDSS_AHB_CLK>,
+					 <&gcc GCC_HDMI_CLKREF_CLK>;
+				clock-names = "iface",
+					      "ref";
+			};
 		};
+		gpu@b00000 {
+			compatible = "qcom,adreno-530.2", "qcom,adreno";
+			#stream-id-cells = <16>;
 
-		apcs_glb: mailbox@9820000 {
-			compatible = "qcom,msm8996-apcs-hmss-global";
-			reg = <0x9820000 0x1000>;
+			reg = <0x00b00000 0x3f000>;
+			reg-names = "kgsl_3d0_reg_memory";
 
-			#mbox-cells = <1>;
+			interrupts = <0 300 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&mmcc GPU_GX_GFX3D_CLK>,
+				<&mmcc GPU_AHB_CLK>,
+				<&mmcc GPU_GX_RBBMTIMER_CLK>,
+				<&gcc GCC_BIMC_GFX_CLK>,
+				<&gcc GCC_MMSS_BIMC_GFX_CLK>;
+
+			clock-names = "core",
+				"iface",
+				"rbbmtimer",
+				"mem",
+				"mem_iface";
+
+			power-domains = <&mmcc GPU_GDSC>;
+			iommus = <&adreno_smmu 0>;
+
+			nvmem-cells = <&gpu_speed_bin>;
+			nvmem-cell-names = "speed_bin";
+
+			qcom,gpu-quirk-two-pass-use-wfi;
+			qcom,gpu-quirk-fault-detect-mask;
+
+			operating-points-v2 = <&gpu_opp_table>;
+
+			gpu_opp_table: opp-table {
+				compatible  ="operating-points-v2";
+
+				/*
+				 * 624Mhz and 560Mhz are only available on speed
+				 * bin (1 << 0). All the rest are available on
+				 * all bins of the hardware
+				 */
+				opp-624000000 {
+					opp-hz = /bits/ 64 <624000000>;
+					opp-supported-hw = <0x01>;
+				};
+				opp-560000000 {
+					opp-hz = /bits/ 64 <560000000>;
+					opp-supported-hw = <0x01>;
+				};
+				opp-510000000 {
+					opp-hz = /bits/ 64 <510000000>;
+					opp-supported-hw = <0xFF>;
+				};
+				opp-401800000 {
+					opp-hz = /bits/ 64 <401800000>;
+					opp-supported-hw = <0xFF>;
+				};
+				opp-315000000 {
+					opp-hz = /bits/ 64 <315000000>;
+					opp-supported-hw = <0xFF>;
+				};
+				opp-214000000 {
+					opp-hz = /bits/ 64 <214000000>;
+					opp-supported-hw = <0xFF>;
+				};
+				opp-133000000 {
+					opp-hz = /bits/ 64 <133000000>;
+					opp-supported-hw = <0xFF>;
+				};
+			};
+
+			zap-shader {
+				memory-region = <&zap_shader_region>;
+			};
 		};
 
-		gcc: clock-controller@300000 {
-			compatible = "qcom,gcc-msm8996";
-			#clock-cells = <1>;
+		msmgpio: pinctrl@1010000 {
+			compatible = "qcom,msm8996-pinctrl";
+			reg = <0x01010000 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		spmi_bus: qcom,spmi@400f000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x0400f000 0x1000>,
+			      <0x04400000 0x800000>,
+			      <0x04c00000 0x800000>,
+			      <0x05800000 0x200000>,
+			      <0x0400a000 0x002100>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		agnoc@0 {
+			power-domains = <&gcc AGGRE0_NOC_GDSC>;
+			compatible = "simple-pm-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			pcie0: pcie@600000 {
+				compatible = "qcom,pcie-msm8996", "snps,dw-pcie";
+				status = "disabled";
+				power-domains = <&gcc PCIE0_GDSC>;
+				bus-range = <0x00 0xff>;
+				num-lanes = <1>;
+
+				reg = <0x00600000 0x2000>,
+				      <0x0c000000 0xf1d>,
+				      <0x0c000f20 0xa8>,
+				      <0x0c100000 0x100000>;
+				reg-names = "parf", "dbi", "elbi","config";
+
+				phys = <&pciephy_0>;
+				phy-names = "pciephy";
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges = <0x01000000 0x0 0x0c200000 0x0c200000 0x0 0x100000>,
+					<0x02000000 0x0 0x0c300000 0x0c300000 0x0 0xd00000>;
+
+				interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "msi";
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0 0 0 0x7>;
+				interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+						<0 0 0 2 &intc 0 245 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+						<0 0 0 3 &intc 0 247 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+						<0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+				pinctrl-names = "default", "sleep";
+				pinctrl-0 = <&pcie0_clkreq_default &pcie0_perst_default &pcie0_wake_default>;
+				pinctrl-1 = <&pcie0_clkreq_sleep &pcie0_perst_default &pcie0_wake_sleep>;
+
+				linux,pci-domain = <0>;
+
+				clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
+					<&gcc GCC_PCIE_0_AUX_CLK>,
+					<&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+					<&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+					<&gcc GCC_PCIE_0_SLV_AXI_CLK>;
+
+				clock-names =  "pipe",
+						"aux",
+						"cfg",
+						"bus_master",
+						"bus_slave";
+
+			};
+
+			pcie1: pcie@608000 {
+				compatible = "qcom,pcie-msm8996", "snps,dw-pcie";
+				power-domains = <&gcc PCIE1_GDSC>;
+				bus-range = <0x00 0xff>;
+				num-lanes = <1>;
+
+				status  = "disabled";
+
+				reg = <0x00608000 0x2000>,
+				      <0x0d000000 0xf1d>,
+				      <0x0d000f20 0xa8>,
+				      <0x0d100000 0x100000>;
+
+				reg-names = "parf", "dbi", "elbi","config";
+
+				phys = <&pciephy_1>;
+				phy-names = "pciephy";
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges = <0x01000000 0x0 0x0d200000 0x0d200000 0x0 0x100000>,
+					<0x02000000 0x0 0x0d300000 0x0d300000 0x0 0xd00000>;
+
+				interrupts = <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "msi";
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0 0 0 0x7>;
+				interrupt-map = <0 0 0 1 &intc 0 272 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+						<0 0 0 2 &intc 0 273 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+						<0 0 0 3 &intc 0 274 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+						<0 0 0 4 &intc 0 275 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+				pinctrl-names = "default", "sleep";
+				pinctrl-0 = <&pcie1_clkreq_default &pcie1_perst_default &pcie1_wake_default>;
+				pinctrl-1 = <&pcie1_clkreq_sleep &pcie1_perst_default &pcie1_wake_sleep>;
+
+				linux,pci-domain = <1>;
+
+				clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
+					<&gcc GCC_PCIE_1_AUX_CLK>,
+					<&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+					<&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
+					<&gcc GCC_PCIE_1_SLV_AXI_CLK>;
+
+				clock-names =  "pipe",
+						"aux",
+						"cfg",
+						"bus_master",
+						"bus_slave";
+			};
+
+			pcie2: pcie@610000 {
+				compatible = "qcom,pcie-msm8996", "snps,dw-pcie";
+				power-domains = <&gcc PCIE2_GDSC>;
+				bus-range = <0x00 0xff>;
+				num-lanes = <1>;
+				status = "disabled";
+				reg = <0x00610000 0x2000>,
+				      <0x0e000000 0xf1d>,
+				      <0x0e000f20 0xa8>,
+				      <0x0e100000 0x100000>;
+
+				reg-names = "parf", "dbi", "elbi","config";
+
+				phys = <&pciephy_2>;
+				phy-names = "pciephy";
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges = <0x01000000 0x0 0x0e200000 0x0e200000 0x0 0x100000>,
+					<0x02000000 0x0 0x0e300000 0x0e300000 0x0 0x1d00000>;
+
+				device_type = "pci";
+
+				interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "msi";
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0 0 0 0x7>;
+				interrupt-map = <0 0 0 1 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+						<0 0 0 2 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+						<0 0 0 3 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+						<0 0 0 4 &intc 0 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+				pinctrl-names = "default", "sleep";
+				pinctrl-0 = <&pcie2_clkreq_default &pcie2_perst_default &pcie2_wake_default>;
+				pinctrl-1 = <&pcie2_clkreq_sleep &pcie2_perst_default &pcie2_wake_sleep >;
+
+				linux,pci-domain = <2>;
+				clocks = <&gcc GCC_PCIE_2_PIPE_CLK>,
+					<&gcc GCC_PCIE_2_AUX_CLK>,
+					<&gcc GCC_PCIE_2_CFG_AHB_CLK>,
+					<&gcc GCC_PCIE_2_MSTR_AXI_CLK>,
+					<&gcc GCC_PCIE_2_SLV_AXI_CLK>;
+
+				clock-names =  "pipe",
+						"aux",
+						"cfg",
+						"bus_master",
+						"bus_slave";
+			};
+		};
+
+		ufshc: ufshc@624000 {
+			compatible = "qcom,ufshc";
+			reg = <0x00624000 0x2500>;
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+
+			phys = <&ufsphy>;
+			phy-names = "ufsphy";
+
+			power-domains = <&gcc UFS_GDSC>;
+
+			clock-names =
+				"core_clk_src",
+				"core_clk",
+				"bus_clk",
+				"bus_aggr_clk",
+				"iface_clk",
+				"core_clk_unipro_src",
+				"core_clk_unipro",
+				"core_clk_ice",
+				"ref_clk",
+				"tx_lane0_sync_clk",
+				"rx_lane0_sync_clk";
+			clocks =
+				<&gcc UFS_AXI_CLK_SRC>,
+				<&gcc GCC_UFS_AXI_CLK>,
+				<&gcc GCC_SYS_NOC_UFS_AXI_CLK>,
+				<&gcc GCC_AGGRE2_UFS_AXI_CLK>,
+				<&gcc GCC_UFS_AHB_CLK>,
+				<&gcc UFS_ICE_CORE_CLK_SRC>,
+				<&gcc GCC_UFS_UNIPRO_CORE_CLK>,
+				<&gcc GCC_UFS_ICE_CORE_CLK>,
+				<&rpmcc RPM_SMD_LN_BB_CLK>,
+				<&gcc GCC_UFS_TX_SYMBOL_0_CLK>,
+				<&gcc GCC_UFS_RX_SYMBOL_0_CLK>;
+			freq-table-hz =
+				<100000000 200000000>,
+				<0 0>,
+				<0 0>,
+				<0 0>,
+				<0 0>,
+				<150000000 300000000>,
+				<0 0>,
+				<0 0>,
+				<0 0>,
+				<0 0>,
+				<0 0>;
+
+			lanes-per-direction = <1>;
 			#reset-cells = <1>;
-			#power-domain-cells = <1>;
-			reg = <0x300000 0x90000>;
+			status = "disabled";
+
+			ufs_variant {
+				compatible = "qcom,ufs_variant";
+			};
+		};
+
+		ufsphy: phy@627000 {
+			compatible = "qcom,msm8996-ufs-phy-qmp-14nm";
+			reg = <0x00627000 0xda8>;
+			reg-names = "phy_mem";
+			#phy-cells = <0>;
+
+			clock-names = "ref_clk_src", "ref_clk";
+			clocks = <&rpmcc RPM_SMD_LN_BB_CLK>,
+				 <&gcc GCC_UFS_CLKREF_CLK>;
+			resets = <&ufshc 0>;
+			status = "disabled";
+		};
+
+		camss: camss@a00000 {
+			compatible = "qcom,msm8996-camss";
+			reg = <0x00a34000 0x1000>,
+			      <0x00a00030 0x4>,
+			      <0x00a35000 0x1000>,
+			      <0x00a00038 0x4>,
+			      <0x00a36000 0x1000>,
+			      <0x00a00040 0x4>,
+			      <0x00a30000 0x100>,
+			      <0x00a30400 0x100>,
+			      <0x00a30800 0x100>,
+			      <0x00a30c00 0x100>,
+			      <0x00a31000 0x500>,
+			      <0x00a00020 0x10>,
+			      <0x00a10000 0x1000>,
+			      <0x00a14000 0x1000>;
+			reg-names = "csiphy0",
+				"csiphy0_clk_mux",
+				"csiphy1",
+				"csiphy1_clk_mux",
+				"csiphy2",
+				"csiphy2_clk_mux",
+				"csid0",
+				"csid1",
+				"csid2",
+				"csid3",
+				"ispif",
+				"csi_clk_mux",
+				"vfe0",
+				"vfe1";
+			interrupts = <GIC_SPI 78 0>,
+				<GIC_SPI 79 0>,
+				<GIC_SPI 80 0>,
+				<GIC_SPI 296 0>,
+				<GIC_SPI 297 0>,
+				<GIC_SPI 298 0>,
+				<GIC_SPI 299 0>,
+				<GIC_SPI 309 0>,
+				<GIC_SPI 314 0>,
+				<GIC_SPI 315 0>;
+			interrupt-names = "csiphy0",
+				"csiphy1",
+				"csiphy2",
+				"csid0",
+				"csid1",
+				"csid2",
+				"csid3",
+				"ispif",
+				"vfe0",
+				"vfe1";
+			power-domains = <&mmcc VFE0_GDSC>;
+			clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
+				<&mmcc CAMSS_ISPIF_AHB_CLK>,
+				<&mmcc CAMSS_CSI0PHYTIMER_CLK>,
+				<&mmcc CAMSS_CSI1PHYTIMER_CLK>,
+				<&mmcc CAMSS_CSI2PHYTIMER_CLK>,
+				<&mmcc CAMSS_CSI0_AHB_CLK>,
+				<&mmcc CAMSS_CSI0_CLK>,
+				<&mmcc CAMSS_CSI0PHY_CLK>,
+				<&mmcc CAMSS_CSI0PIX_CLK>,
+				<&mmcc CAMSS_CSI0RDI_CLK>,
+				<&mmcc CAMSS_CSI1_AHB_CLK>,
+				<&mmcc CAMSS_CSI1_CLK>,
+				<&mmcc CAMSS_CSI1PHY_CLK>,
+				<&mmcc CAMSS_CSI1PIX_CLK>,
+				<&mmcc CAMSS_CSI1RDI_CLK>,
+				<&mmcc CAMSS_CSI2_AHB_CLK>,
+				<&mmcc CAMSS_CSI2_CLK>,
+				<&mmcc CAMSS_CSI2PHY_CLK>,
+				<&mmcc CAMSS_CSI2PIX_CLK>,
+				<&mmcc CAMSS_CSI2RDI_CLK>,
+				<&mmcc CAMSS_CSI3_AHB_CLK>,
+				<&mmcc CAMSS_CSI3_CLK>,
+				<&mmcc CAMSS_CSI3PHY_CLK>,
+				<&mmcc CAMSS_CSI3PIX_CLK>,
+				<&mmcc CAMSS_CSI3RDI_CLK>,
+				<&mmcc CAMSS_AHB_CLK>,
+				<&mmcc CAMSS_VFE0_CLK>,
+				<&mmcc CAMSS_CSI_VFE0_CLK>,
+				<&mmcc CAMSS_VFE0_AHB_CLK>,
+				<&mmcc CAMSS_VFE0_STREAM_CLK>,
+				<&mmcc CAMSS_VFE1_CLK>,
+				<&mmcc CAMSS_CSI_VFE1_CLK>,
+				<&mmcc CAMSS_VFE1_AHB_CLK>,
+				<&mmcc CAMSS_VFE1_STREAM_CLK>,
+				<&mmcc CAMSS_VFE_AHB_CLK>,
+				<&mmcc CAMSS_VFE_AXI_CLK>;
+			clock-names = "top_ahb",
+				"ispif_ahb",
+				"csiphy0_timer",
+				"csiphy1_timer",
+				"csiphy2_timer",
+				"csi0_ahb",
+				"csi0",
+				"csi0_phy",
+				"csi0_pix",
+				"csi0_rdi",
+				"csi1_ahb",
+				"csi1",
+				"csi1_phy",
+				"csi1_pix",
+				"csi1_rdi",
+				"csi2_ahb",
+				"csi2",
+				"csi2_phy",
+				"csi2_pix",
+				"csi2_rdi",
+				"csi3_ahb",
+				"csi3",
+				"csi3_phy",
+				"csi3_pix",
+				"csi3_rdi",
+				"ahb",
+				"vfe0",
+				"csi_vfe0",
+				"vfe0_ahb",
+				"vfe0_stream",
+				"vfe1",
+				"csi_vfe1",
+				"vfe1_ahb",
+				"vfe1_stream",
+				"vfe_ahb",
+				"vfe_axi";
+			iommus = <&vfe_smmu 0>,
+				 <&vfe_smmu 1>,
+				 <&vfe_smmu 2>,
+				 <&vfe_smmu 3>;
+			status = "disabled";
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		adreno_smmu: iommu@b40000 {
+			compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
+			reg = <0x00b40000 0x10000>;
+
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+
+			clocks = <&mmcc GPU_AHB_CLK>,
+				 <&gcc GCC_MMSS_BIMC_GFX_CLK>;
+			clock-names = "iface", "bus";
+
+			power-domains = <&mmcc GPU_GDSC>;
+		};
+
+		video-codec@c00000 {
+			compatible = "qcom,msm8996-venus";
+			reg = <0x00c00000 0xff000>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&mmcc VENUS_GDSC>;
+			clocks = <&mmcc VIDEO_CORE_CLK>,
+				 <&mmcc VIDEO_AHB_CLK>,
+				 <&mmcc VIDEO_AXI_CLK>,
+				 <&mmcc VIDEO_MAXI_CLK>;
+			clock-names = "core", "iface", "bus", "mbus";
+			iommus = <&venus_smmu 0x00>,
+				 <&venus_smmu 0x01>,
+				 <&venus_smmu 0x0a>,
+				 <&venus_smmu 0x07>,
+				 <&venus_smmu 0x0e>,
+				 <&venus_smmu 0x0f>,
+				 <&venus_smmu 0x08>,
+				 <&venus_smmu 0x09>,
+				 <&venus_smmu 0x0b>,
+				 <&venus_smmu 0x0c>,
+				 <&venus_smmu 0x0d>,
+				 <&venus_smmu 0x10>,
+				 <&venus_smmu 0x11>,
+				 <&venus_smmu 0x21>,
+				 <&venus_smmu 0x28>,
+				 <&venus_smmu 0x29>,
+				 <&venus_smmu 0x2b>,
+				 <&venus_smmu 0x2c>,
+				 <&venus_smmu 0x2d>,
+				 <&venus_smmu 0x31>;
+			memory-region = <&venus_region>;
+			status = "okay";
+
+			video-decoder {
+				compatible = "venus-decoder";
+				clocks = <&mmcc VIDEO_SUBCORE0_CLK>;
+				clock-names = "core";
+				power-domains = <&mmcc VENUS_CORE0_GDSC>;
+			};
+
+			video-encoder {
+				compatible = "venus-encoder";
+				clocks = <&mmcc VIDEO_SUBCORE1_CLK>;
+				clock-names = "core";
+				power-domains = <&mmcc VENUS_CORE1_GDSC>;
+			};
+		};
+
+		mdp_smmu: iommu@d00000 {
+			compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
+			reg = <0x00d00000 0x10000>;
+
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			clocks = <&mmcc SMMU_MDP_AHB_CLK>,
+				 <&mmcc SMMU_MDP_AXI_CLK>;
+			clock-names = "iface", "bus";
+
+			power-domains = <&mmcc MDSS_GDSC>;
+		};
+
+		venus_smmu: iommu@d40000 {
+			compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
+			reg = <0x00d40000 0x20000>;
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&mmcc MMAGIC_VIDEO_GDSC>;
+			clocks = <&mmcc SMMU_VIDEO_AHB_CLK>,
+				 <&mmcc SMMU_VIDEO_AXI_CLK>;
+			clock-names = "iface", "bus";
+			#iommu-cells = <1>;
+			status = "okay";
+		};
+
+		vfe_smmu: iommu@da0000 {
+			compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
+			reg = <0x00da0000 0x10000>;
+
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&mmcc MMAGIC_CAMSS_GDSC>;
+			clocks = <&mmcc SMMU_VFE_AHB_CLK>,
+				 <&mmcc SMMU_VFE_AXI_CLK>;
+			clock-names = "iface",
+				      "bus";
+			#iommu-cells = <1>;
+		};
+
+		lpass_q6_smmu: iommu@1600000 {
+			compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
+			reg = <0x01600000 0x20000>;
+			#iommu-cells = <1>;
+			power-domains = <&gcc HLOS1_VOTE_LPASS_CORE_GDSC>;
+
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+		                <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>,
+		                <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>,
+		                <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>,
+		                <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+		                <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+		                <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+		                <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+		                <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+		                <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+		                <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+		                <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+		                <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_HLOS1_VOTE_LPASS_CORE_SMMU_CLK>,
+				 <&gcc GCC_HLOS1_VOTE_LPASS_ADSP_SMMU_CLK>;
+			clock-names = "iface", "bus";
 		};
 
 		stm@3002000 {
@@ -1104,13 +1690,119 @@
 				};
 			};
 		};
-
 		kryocc: clock-controller@6400000 {
 			compatible = "qcom,apcc-msm8996";
-			reg = <0x6400000 0x90000>;
+			reg = <0x06400000 0x90000>;
+			#clock-cells = <1>;
+		};
+
+		usb3: usb@6af8800 {
+			compatible = "qcom,msm8996-dwc3", "qcom,dwc3";
+			reg = <0x06af8800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_SYS_NOC_USB3_AXI_CLK>,
+				<&gcc GCC_USB30_MASTER_CLK>,
+				<&gcc GCC_AGGRE2_USB3_AXI_CLK>,
+				<&gcc GCC_USB30_MOCK_UTMI_CLK>,
+				<&gcc GCC_USB30_SLEEP_CLK>,
+				<&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>;
+
+			assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <120000000>;
+
+			power-domains = <&gcc USB30_GDSC>;
+			status = "disabled";
+
+			dwc3@6a00000 {
+				compatible = "snps,dwc3";
+				reg = <0x06a00000 0xcc00>;
+				interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&hsusb_phy1>, <&ssusb_phy_0>;
+				phy-names = "usb2-phy", "usb3-phy";
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+			};
+		};
+
+		usb3phy: phy@7410000 {
+			compatible = "qcom,msm8996-qmp-usb3-phy";
+			reg = <0x07410000 0x1c4>;
 			#clock-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
+				<&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+				<&gcc GCC_USB3_CLKREF_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_USB3_PHY_BCR>,
+				<&gcc GCC_USB3PHY_PHY_BCR>;
+			reset-names = "phy", "common";
+			status = "disabled";
+
+			ssusb_phy_0: lane@7410200 {
+				reg = <0x07410200 0x200>,
+				      <0x07410400 0x130>,
+				      <0x07410600 0x1a8>;
+				#phy-cells = <0>;
+
+				clock-output-names = "usb3_phy_pipe_clk_src";
+				clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
+				clock-names = "pipe0";
+			};
 		};
 
+		hsusb_phy1: phy@7411000 {
+			compatible = "qcom,msm8996-qusb2-phy";
+			reg = <0x07411000 0x180>;
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+				<&gcc GCC_RX1_USB2_CLKREF_CLK>;
+			clock-names = "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+			nvmem-cells = <&qusb2p_hstx_trim>;
+			status = "disabled";
+		};
+
+		hsusb_phy2: phy@7412000 {
+			compatible = "qcom,msm8996-qusb2-phy";
+			reg = <0x07412000 0x180>;
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+				<&gcc GCC_RX2_USB2_CLKREF_CLK>;
+			clock-names = "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
+			nvmem-cells = <&qusb2s_hstx_trim>;
+			status = "disabled";
+		};
+
+		sdhc2: sdhci@74a4900 {
+			 status = "disabled";
+			 compatible = "qcom,sdhci-msm-v4";
+			 reg = <0x074a4900 0x314>, <0x074a4000 0x800>;
+			 reg-names = "hc_mem", "core_mem";
+
+			 interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>,
+				      <0 221 IRQ_TYPE_LEVEL_HIGH>;
+			 interrupt-names = "hc_irq", "pwr_irq";
+
+			 clock-names = "iface", "core", "xo";
+			 clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+			 <&gcc GCC_SDCC2_APPS_CLK>,
+			 <&xo_board>;
+			 bus-width = <4>;
+		 };
+
 		blsp1_uart1: serial@7570000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0x07570000 0x1000>;
@@ -1136,16 +1828,16 @@
 			status = "disabled";
 		};
 
-		blsp2_i2c0: i2c@75b5000 {
+		blsp1_i2c2: i2c@7577000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
-			reg = <0x075b5000 0x1000>;
-			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP2_AHB_CLK>,
-				<&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>;
+			reg = <0x07577000 0x1000>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+				<&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>;
 			clock-names = "iface", "core";
 			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&blsp2_i2c0_default>;
-			pinctrl-1 = <&blsp2_i2c0_sleep>;
+			pinctrl-0 = <&blsp1_i2c2_default>;
+			pinctrl-1 = <&blsp1_i2c2_sleep>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -1153,7 +1845,7 @@
 
 		blsp2_uart1: serial@75b0000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
-			reg = <0x75b0000 0x1000>;
+			reg = <0x075b0000 0x1000>;
 			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>,
 				 <&gcc GCC_BLSP2_AHB_CLK>;
@@ -1161,21 +1853,6 @@
 			status = "disabled";
 		};
 
-		blsp2_i2c1: i2c@75b6000 {
-			compatible = "qcom,i2c-qup-v2.2.1";
-			reg = <0x075b6000 0x1000>;
-			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP2_AHB_CLK>,
-				<&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>;
-			clock-names = "iface", "core";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&blsp2_i2c1_default>;
-			pinctrl-1 = <&blsp2_i2c1_sleep>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
 		blsp2_uart2: serial@75b1000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0x075b1000 0x1000>;
@@ -1186,16 +1863,31 @@
 			status = "disabled";
 		};
 
-		blsp1_i2c2: i2c@7577000 {
+		blsp2_i2c0: i2c@75b5000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
-			reg = <0x07577000 0x1000>;
-			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
-				<&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>;
+			reg = <0x075b5000 0x1000>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_AHB_CLK>,
+				<&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>;
 			clock-names = "iface", "core";
 			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&blsp1_i2c2_default>;
-			pinctrl-1 = <&blsp1_i2c2_sleep>;
+			pinctrl-0 = <&blsp2_i2c0_default>;
+			pinctrl-1 = <&blsp2_i2c0_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp2_i2c1: i2c@75b6000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x075b6000 0x1000>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_AHB_CLK>,
+				<&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>;
+			clock-names = "iface", "core";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_i2c1_default>;
+			pinctrl-1 = <&blsp2_i2c1_sleep>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -1216,369 +1908,9 @@
 			status = "disabled";
 		};
 
-		sdhc2: sdhci@74a4900 {
-			 status = "disabled";
-			 compatible = "qcom,sdhci-msm-v4";
-			 reg = <0x74a4900 0x314>, <0x74a4000 0x800>;
-			 reg-names = "hc_mem", "core_mem";
-
-			 interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>,
-				      <0 221 IRQ_TYPE_LEVEL_HIGH>;
-			 interrupt-names = "hc_irq", "pwr_irq";
-
-			 clock-names = "iface", "core", "xo";
-			 clocks = <&gcc GCC_SDCC2_AHB_CLK>,
-			 <&gcc GCC_SDCC2_APPS_CLK>,
-			 <&xo_board>;
-			 bus-width = <4>;
-		 };
-
-		msmgpio: pinctrl@1010000 {
-			compatible = "qcom,msm8996-pinctrl";
-			reg = <0x01010000 0x300000>;
-			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		timer@9840000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			compatible = "arm,armv7-timer-mem";
-			reg = <0x09840000 0x1000>;
-			clock-frequency = <19200000>;
-
-			frame@9850000 {
-				frame-number = <0>;
-				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0x09850000 0x1000>,
-				      <0x09860000 0x1000>;
-			};
-
-			frame@9870000 {
-				frame-number = <1>;
-				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0x09870000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@9880000 {
-				frame-number = <2>;
-				interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0x09880000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@9890000 {
-				frame-number = <3>;
-				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0x09890000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@98a0000 {
-				frame-number = <4>;
-				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0x098a0000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@98b0000 {
-				frame-number = <5>;
-				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0x098b0000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@98c0000 {
-				frame-number = <6>;
-				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0x098c0000 0x1000>;
-				status = "disabled";
-			};
-		};
-
-		spmi_bus: qcom,spmi@400f000 {
-			compatible = "qcom,spmi-pmic-arb";
-			reg = <0x400f000 0x1000>,
-			      <0x4400000 0x800000>,
-			      <0x4c00000 0x800000>,
-			      <0x5800000 0x200000>,
-			      <0x400a000 0x002100>;
-			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
-			interrupt-names = "periph_irq";
-			interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,ee = <0>;
-			qcom,channel = <0>;
-			#address-cells = <2>;
-			#size-cells = <0>;
-			interrupt-controller;
-			#interrupt-cells = <4>;
-		};
-
-		ufsphy: phy@627000 {
-			compatible = "qcom,msm8996-ufs-phy-qmp-14nm";
-			reg = <0x627000 0xda8>;
-			reg-names = "phy_mem";
-			#phy-cells = <0>;
-
-			vdda-phy-supply = <&pm8994_l28>;
-			vdda-pll-supply = <&pm8994_l12>;
-
-			vdda-phy-max-microamp = <18380>;
-			vdda-pll-max-microamp = <9440>;
-
-			vddp-ref-clk-supply = <&pm8994_l25>;
-			vddp-ref-clk-max-microamp = <100>;
-			vddp-ref-clk-always-on;
-
-			clock-names = "ref_clk_src", "ref_clk";
-			clocks = <&rpmcc RPM_SMD_LN_BB_CLK>,
-				 <&gcc GCC_UFS_CLKREF_CLK>;
-			resets = <&ufshc 0>;
-			status = "disabled";
-		};
-
-		ufshc: ufshc@624000 {
-			compatible = "qcom,ufshc";
-			reg = <0x624000 0x2500>;
-			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
-
-			phys = <&ufsphy>;
-			phy-names = "ufsphy";
-
-			vcc-supply = <&pm8994_l20>;
-			vccq-supply = <&pm8994_l25>;
-			vccq2-supply = <&pm8994_s4>;
-
-			vcc-max-microamp = <600000>;
-			vccq-max-microamp = <450000>;
-			vccq2-max-microamp = <450000>;
-
-			power-domains = <&gcc UFS_GDSC>;
-
-			clock-names =
-				"core_clk_src",
-				"core_clk",
-				"bus_clk",
-				"bus_aggr_clk",
-				"iface_clk",
-				"core_clk_unipro_src",
-				"core_clk_unipro",
-				"core_clk_ice",
-				"ref_clk",
-				"tx_lane0_sync_clk",
-				"rx_lane0_sync_clk";
-			clocks =
-				<&gcc UFS_AXI_CLK_SRC>,
-				<&gcc GCC_UFS_AXI_CLK>,
-				<&gcc GCC_SYS_NOC_UFS_AXI_CLK>,
-				<&gcc GCC_AGGRE2_UFS_AXI_CLK>,
-				<&gcc GCC_UFS_AHB_CLK>,
-				<&gcc UFS_ICE_CORE_CLK_SRC>,
-				<&gcc GCC_UFS_UNIPRO_CORE_CLK>,
-				<&gcc GCC_UFS_ICE_CORE_CLK>,
-				<&rpmcc RPM_SMD_LN_BB_CLK>,
-				<&gcc GCC_UFS_TX_SYMBOL_0_CLK>,
-				<&gcc GCC_UFS_RX_SYMBOL_0_CLK>;
-			freq-table-hz =
-				<100000000 200000000>,
-				<0 0>,
-				<0 0>,
-				<0 0>,
-				<0 0>,
-				<150000000 300000000>,
-				<0 0>,
-				<0 0>,
-				<0 0>,
-				<0 0>,
-				<0 0>;
-
-			lanes-per-direction = <1>;
-			#reset-cells = <1>;
-			status = "disabled";
-
-			ufs_variant {
-				compatible = "qcom,ufs_variant";
-			};
-		};
-
-		mmcc: clock-controller@8c0000 {
-			compatible = "qcom,mmcc-msm8996";
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			#power-domain-cells = <1>;
-			reg = <0x8c0000 0x40000>;
-			assigned-clocks = <&mmcc MMPLL9_PLL>,
-					  <&mmcc MMPLL1_PLL>,
-					  <&mmcc MMPLL3_PLL>,
-					  <&mmcc MMPLL4_PLL>,
-					  <&mmcc MMPLL5_PLL>;
-			assigned-clock-rates = <624000000>,
-					       <810000000>,
-					       <980000000>,
-					       <960000000>,
-					       <825000000>;
-		};
-
-		qfprom@74000 {
-			compatible = "qcom,qfprom";
-			reg = <0x74000 0x8ff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			qusb2p_hstx_trim: hstx_trim@24e {
-				reg = <0x24e 0x2>;
-				bits = <5 4>;
-			};
-
-			qusb2s_hstx_trim: hstx_trim@24f {
-				reg = <0x24f 0x1>;
-				bits = <1 4>;
-			};
-
-			gpu_speed_bin: gpu_speed_bin@133 {
-				reg = <0x133 0x1>;
-				bits = <5 3>;
-			};
-		};
-
-		phy@34000 {
-			compatible = "qcom,msm8996-qmp-pcie-phy";
-			reg = <0x34000 0x488>;
-			#clock-cells = <1>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
-				<&gcc GCC_PCIE_PHY_CFG_AHB_CLK>,
-				<&gcc GCC_PCIE_CLKREF_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref";
-
-			vdda-phy-supply = <&pm8994_l28>;
-			vdda-pll-supply = <&pm8994_l12>;
-
-			resets = <&gcc GCC_PCIE_PHY_BCR>,
-				<&gcc GCC_PCIE_PHY_COM_BCR>,
-				<&gcc GCC_PCIE_PHY_COM_NOCSR_BCR>;
-			reset-names = "phy", "common", "cfg";
-			status = "disabled";
-
-			pciephy_0: lane@35000 {
-				reg = <0x035000 0x130>,
-					<0x035200 0x200>,
-					<0x035400 0x1dc>;
-				#phy-cells = <0>;
-
-				clock-output-names = "pcie_0_pipe_clk_src";
-				clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
-				clock-names = "pipe0";
-				resets = <&gcc GCC_PCIE_0_PHY_BCR>;
-				reset-names = "lane0";
-			};
-
-			pciephy_1: lane@36000 {
-				reg = <0x036000 0x130>,
-					<0x036200 0x200>,
-					<0x036400 0x1dc>;
-				#phy-cells = <0>;
-
-				clock-output-names = "pcie_1_pipe_clk_src";
-				clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
-				clock-names = "pipe1";
-				resets = <&gcc GCC_PCIE_1_PHY_BCR>;
-				reset-names = "lane1";
-			};
-
-			pciephy_2: lane@37000 {
-				reg = <0x037000 0x130>,
-					<0x037200 0x200>,
-					<0x037400 0x1dc>;
-				#phy-cells = <0>;
-
-				clock-output-names = "pcie_2_pipe_clk_src";
-				clocks = <&gcc GCC_PCIE_2_PIPE_CLK>;
-				clock-names = "pipe2";
-				resets = <&gcc GCC_PCIE_2_PHY_BCR>;
-				reset-names = "lane2";
-			};
-		};
-
-		phy@7410000 {
-			compatible = "qcom,msm8996-qmp-usb3-phy";
-			reg = <0x7410000 0x1c4>;
-			#clock-cells = <1>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
-				<&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
-				<&gcc GCC_USB3_CLKREF_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref";
-
-			vdda-phy-supply = <&pm8994_l28>;
-			vdda-pll-supply = <&pm8994_l12>;
-
-			resets = <&gcc GCC_USB3_PHY_BCR>,
-				<&gcc GCC_USB3PHY_PHY_BCR>;
-			reset-names = "phy", "common";
-			status = "disabled";
-
-			ssusb_phy_0: lane@7410200 {
-				reg = <0x7410200 0x200>,
-					<0x7410400 0x130>,
-					<0x7410600 0x1a8>;
-				#phy-cells = <0>;
-
-				clock-output-names = "usb3_phy_pipe_clk_src";
-				clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-			};
-		};
-
-		hsusb_phy1: phy@7411000 {
-			compatible = "qcom,msm8996-qusb2-phy";
-			reg = <0x7411000 0x180>;
-			#phy-cells = <0>;
-
-			clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
-				<&gcc GCC_RX1_USB2_CLKREF_CLK>;
-			clock-names = "cfg_ahb", "ref";
-
-			vdda-pll-supply = <&pm8994_l12>;
-			vdda-phy-dpdm-supply = <&pm8994_l24>;
-
-			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
-			nvmem-cells = <&qusb2p_hstx_trim>;
-			status = "disabled";
-		};
-
-		hsusb_phy2: phy@7412000 {
-			compatible = "qcom,msm8996-qusb2-phy";
-			reg = <0x7412000 0x180>;
-			#phy-cells = <0>;
-
-			clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
-				<&gcc GCC_RX2_USB2_CLKREF_CLK>;
-			clock-names = "cfg_ahb", "ref";
-
-			vdda-pll-supply = <&pm8994_l12>;
-			vdda-phy-dpdm-supply = <&pm8994_l24>;
-
-			resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
-			nvmem-cells = <&qusb2s_hstx_trim>;
-			status = "disabled";
-		};
-
 		usb2: usb@76f8800 {
 			compatible = "qcom,msm8996-dwc3", "qcom,dwc3";
-			reg = <0x76f8800 0x400>;
+			reg = <0x076f8800 0x400>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -1598,424 +1930,19 @@
 
 			dwc3@7600000 {
 				compatible = "snps,dwc3";
-				reg = <0x7600000 0xcc00>;
+				reg = <0x07600000 0xcc00>;
 				interrupts = <0 138 IRQ_TYPE_LEVEL_HIGH>;
 				phys = <&hsusb_phy2>;
 				phy-names = "usb2-phy";
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
 			};
 		};
 
-		usb3: usb@6af8800 {
-			compatible = "qcom,msm8996-dwc3", "qcom,dwc3";
-			reg = <0x6af8800 0x400>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			clocks = <&gcc GCC_SYS_NOC_USB3_AXI_CLK>,
-				<&gcc GCC_USB30_MASTER_CLK>,
-				<&gcc GCC_AGGRE2_USB3_AXI_CLK>,
-				<&gcc GCC_USB30_MOCK_UTMI_CLK>,
-				<&gcc GCC_USB30_SLEEP_CLK>,
-				<&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>;
-
-			assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
-					  <&gcc GCC_USB30_MASTER_CLK>;
-			assigned-clock-rates = <19200000>, <120000000>;
-
-			power-domains = <&gcc USB30_GDSC>;
-			status = "disabled";
-
-			dwc3@6a00000 {
-				compatible = "snps,dwc3";
-				reg = <0x6a00000 0xcc00>;
-				interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&hsusb_phy1>, <&ssusb_phy_0>;
-				phy-names = "usb2-phy", "usb3-phy";
-			};
-		};
-
-		vfe_smmu: iommu@da0000 {
-			compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
-			reg = <0xda0000 0x10000>;
-
-			#global-interrupts = <1>;
-			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
-			power-domains = <&mmcc MMAGIC_CAMSS_GDSC>;
-			clocks = <&mmcc SMMU_VFE_AHB_CLK>,
-				 <&mmcc SMMU_VFE_AXI_CLK>;
-			clock-names = "iface",
-				      "bus";
-			#iommu-cells = <1>;
-		};
-
-		camss: camss@a00000 {
-			compatible = "qcom,msm8996-camss";
-			reg = <0xa34000 0x1000>,
-				<0xa00030 0x4>,
-				<0xa35000 0x1000>,
-				<0xa00038 0x4>,
-				<0xa36000 0x1000>,
-				<0xa00040 0x4>,
-				<0xa30000 0x100>,
-				<0xa30400 0x100>,
-				<0xa30800 0x100>,
-				<0xa30c00 0x100>,
-				<0xa31000 0x500>,
-				<0xa00020 0x10>,
-				<0xa10000 0x1000>,
-				<0xa14000 0x1000>;
-			reg-names = "csiphy0",
-				"csiphy0_clk_mux",
-				"csiphy1",
-				"csiphy1_clk_mux",
-				"csiphy2",
-				"csiphy2_clk_mux",
-				"csid0",
-				"csid1",
-				"csid2",
-				"csid3",
-				"ispif",
-				"csi_clk_mux",
-				"vfe0",
-				"vfe1";
-			interrupts = <GIC_SPI 78 0>,
-				<GIC_SPI 79 0>,
-				<GIC_SPI 80 0>,
-				<GIC_SPI 296 0>,
-				<GIC_SPI 297 0>,
-				<GIC_SPI 298 0>,
-				<GIC_SPI 299 0>,
-				<GIC_SPI 309 0>,
-				<GIC_SPI 314 0>,
-				<GIC_SPI 315 0>;
-			interrupt-names = "csiphy0",
-				"csiphy1",
-				"csiphy2",
-				"csid0",
-				"csid1",
-				"csid2",
-				"csid3",
-				"ispif",
-				"vfe0",
-				"vfe1";
-			power-domains = <&mmcc VFE0_GDSC>;
-			clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
-				<&mmcc CAMSS_ISPIF_AHB_CLK>,
-				<&mmcc CAMSS_CSI0PHYTIMER_CLK>,
-				<&mmcc CAMSS_CSI1PHYTIMER_CLK>,
-				<&mmcc CAMSS_CSI2PHYTIMER_CLK>,
-				<&mmcc CAMSS_CSI0_AHB_CLK>,
-				<&mmcc CAMSS_CSI0_CLK>,
-				<&mmcc CAMSS_CSI0PHY_CLK>,
-				<&mmcc CAMSS_CSI0PIX_CLK>,
-				<&mmcc CAMSS_CSI0RDI_CLK>,
-				<&mmcc CAMSS_CSI1_AHB_CLK>,
-				<&mmcc CAMSS_CSI1_CLK>,
-				<&mmcc CAMSS_CSI1PHY_CLK>,
-				<&mmcc CAMSS_CSI1PIX_CLK>,
-				<&mmcc CAMSS_CSI1RDI_CLK>,
-				<&mmcc CAMSS_CSI2_AHB_CLK>,
-				<&mmcc CAMSS_CSI2_CLK>,
-				<&mmcc CAMSS_CSI2PHY_CLK>,
-				<&mmcc CAMSS_CSI2PIX_CLK>,
-				<&mmcc CAMSS_CSI2RDI_CLK>,
-				<&mmcc CAMSS_CSI3_AHB_CLK>,
-				<&mmcc CAMSS_CSI3_CLK>,
-				<&mmcc CAMSS_CSI3PHY_CLK>,
-				<&mmcc CAMSS_CSI3PIX_CLK>,
-				<&mmcc CAMSS_CSI3RDI_CLK>,
-				<&mmcc CAMSS_AHB_CLK>,
-				<&mmcc CAMSS_VFE0_CLK>,
-				<&mmcc CAMSS_CSI_VFE0_CLK>,
-				<&mmcc CAMSS_VFE0_AHB_CLK>,
-				<&mmcc CAMSS_VFE0_STREAM_CLK>,
-				<&mmcc CAMSS_VFE1_CLK>,
-				<&mmcc CAMSS_CSI_VFE1_CLK>,
-				<&mmcc CAMSS_VFE1_AHB_CLK>,
-				<&mmcc CAMSS_VFE1_STREAM_CLK>,
-				<&mmcc CAMSS_VFE_AHB_CLK>,
-				<&mmcc CAMSS_VFE_AXI_CLK>;
-			clock-names = "top_ahb",
-				"ispif_ahb",
-				"csiphy0_timer",
-				"csiphy1_timer",
-				"csiphy2_timer",
-				"csi0_ahb",
-				"csi0",
-				"csi0_phy",
-				"csi0_pix",
-				"csi0_rdi",
-				"csi1_ahb",
-				"csi1",
-				"csi1_phy",
-				"csi1_pix",
-				"csi1_rdi",
-				"csi2_ahb",
-				"csi2",
-				"csi2_phy",
-				"csi2_pix",
-				"csi2_rdi",
-				"csi3_ahb",
-				"csi3",
-				"csi3_phy",
-				"csi3_pix",
-				"csi3_rdi",
-				"ahb",
-				"vfe0",
-				"csi_vfe0",
-				"vfe0_ahb",
-				"vfe0_stream",
-				"vfe1",
-				"csi_vfe1",
-				"vfe1_ahb",
-				"vfe1_stream",
-				"vfe_ahb",
-				"vfe_axi";
-			vdda-supply = <&pm8994_l2>;
-			iommus = <&vfe_smmu 0>,
-				 <&vfe_smmu 1>,
-				 <&vfe_smmu 2>,
-				 <&vfe_smmu 3>;
-			status = "disabled";
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-		};
-
-		adreno_smmu: iommu@b40000 {
-			compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
-			reg = <0xb40000 0x10000>;
-
-			#global-interrupts = <1>;
-			interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
-			#iommu-cells = <1>;
-
-			clocks = <&mmcc GPU_AHB_CLK>,
-				 <&gcc GCC_MMSS_BIMC_GFX_CLK>;
-			clock-names = "iface", "bus";
-
-			power-domains = <&mmcc GPU_GDSC>;
-		};
-
-		mdp_smmu: iommu@d00000 {
-			compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
-			reg = <0xd00000 0x10000>;
-
-			#global-interrupts = <1>;
-			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
-			#iommu-cells = <1>;
-			clocks = <&mmcc SMMU_MDP_AHB_CLK>,
-				 <&mmcc SMMU_MDP_AXI_CLK>;
-			clock-names = "iface", "bus";
-
-			power-domains = <&mmcc MDSS_GDSC>;
-		};
-
-		lpass_q6_smmu: iommu@1600000 {
-			compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
-			reg = <0x1600000 0x20000>;
-			#iommu-cells = <1>;
-			power-domains = <&gcc HLOS1_VOTE_LPASS_CORE_GDSC>;
-
-			#global-interrupts = <1>;
-			interrupts = <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
-		                <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>,
-		                <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>,
-		                <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>,
-		                <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
-		                <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
-		                <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
-		                <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
-		                <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
-		                <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
-		                <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
-		                <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
-		                <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>;
-
-			clocks = <&gcc GCC_HLOS1_VOTE_LPASS_CORE_SMMU_CLK>,
-				 <&gcc GCC_HLOS1_VOTE_LPASS_ADSP_SMMU_CLK>;
-			clock-names = "iface", "bus";
-		};
-
-		agnoc@0 {
-			power-domains = <&gcc AGGRE0_NOC_GDSC>;
-			compatible = "simple-pm-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			pcie0: pcie@600000 {
-				compatible = "qcom,pcie-msm8996", "snps,dw-pcie";
-				status = "disabled";
-				power-domains = <&gcc PCIE0_GDSC>;
-				bus-range = <0x00 0xff>;
-				num-lanes = <1>;
-
-				reg = <0x00600000 0x2000>,
-				      <0x0c000000 0xf1d>,
-				      <0x0c000f20 0xa8>,
-				      <0x0c100000 0x100000>;
-				reg-names = "parf", "dbi", "elbi","config";
-
-				phys = <&pciephy_0>;
-				phy-names = "pciephy";
-
-				#address-cells = <3>;
-				#size-cells = <2>;
-				ranges = <0x01000000 0x0 0x0c200000 0x0c200000 0x0 0x100000>,
-					<0x02000000 0x0 0x0c300000 0x0c300000 0x0 0xd00000>;
-
-				interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "msi";
-				#interrupt-cells = <1>;
-				interrupt-map-mask = <0 0 0 0x7>;
-				interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-						<0 0 0 2 &intc 0 245 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-						<0 0 0 3 &intc 0 247 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-						<0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
-
-				pinctrl-names = "default", "sleep";
-				pinctrl-0 = <&pcie0_clkreq_default &pcie0_perst_default &pcie0_wake_default>;
-				pinctrl-1 = <&pcie0_clkreq_sleep &pcie0_perst_default &pcie0_wake_sleep>;
-
-
-				vdda-supply = <&pm8994_l28>;
-
-				linux,pci-domain = <0>;
-
-				clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
-					<&gcc GCC_PCIE_0_AUX_CLK>,
-					<&gcc GCC_PCIE_0_CFG_AHB_CLK>,
-					<&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
-					<&gcc GCC_PCIE_0_SLV_AXI_CLK>;
-
-				clock-names =  "pipe",
-						"aux",
-						"cfg",
-						"bus_master",
-						"bus_slave";
-
-			};
-
-			pcie1: pcie@608000 {
-				compatible = "qcom,pcie-msm8996", "snps,dw-pcie";
-				power-domains = <&gcc PCIE1_GDSC>;
-				bus-range = <0x00 0xff>;
-				num-lanes = <1>;
-
-				status  = "disabled";
-
-				reg = <0x00608000 0x2000>,
-				      <0x0d000000 0xf1d>,
-				      <0x0d000f20 0xa8>,
-				      <0x0d100000 0x100000>;
-
-				reg-names = "parf", "dbi", "elbi","config";
-
-				phys = <&pciephy_1>;
-				phy-names = "pciephy";
-
-				#address-cells = <3>;
-				#size-cells = <2>;
-				ranges = <0x01000000 0x0 0x0d200000 0x0d200000 0x0 0x100000>,
-					<0x02000000 0x0 0x0d300000 0x0d300000 0x0 0xd00000>;
-
-				interrupts = <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "msi";
-				#interrupt-cells = <1>;
-				interrupt-map-mask = <0 0 0 0x7>;
-				interrupt-map = <0 0 0 1 &intc 0 272 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-						<0 0 0 2 &intc 0 273 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-						<0 0 0 3 &intc 0 274 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-						<0 0 0 4 &intc 0 275 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
-
-				pinctrl-names = "default", "sleep";
-				pinctrl-0 = <&pcie1_clkreq_default &pcie1_perst_default &pcie1_wake_default>;
-				pinctrl-1 = <&pcie1_clkreq_sleep &pcie1_perst_default &pcie1_wake_sleep>;
-
-
-				vdda-supply = <&pm8994_l28>;
-				linux,pci-domain = <1>;
-
-				clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
-					<&gcc GCC_PCIE_1_AUX_CLK>,
-					<&gcc GCC_PCIE_1_CFG_AHB_CLK>,
-					<&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
-					<&gcc GCC_PCIE_1_SLV_AXI_CLK>;
-
-				clock-names =  "pipe",
-						"aux",
-						"cfg",
-						"bus_master",
-						"bus_slave";
-			};
-
-			pcie2: pcie@610000 {
-				compatible = "qcom,pcie-msm8996", "snps,dw-pcie";
-				power-domains = <&gcc PCIE2_GDSC>;
-				bus-range = <0x00 0xff>;
-				num-lanes = <1>;
-				status = "disabled";
-				reg = <0x00610000 0x2000>,
-				      <0x0e000000 0xf1d>,
-				      <0x0e000f20 0xa8>,
-				      <0x0e100000 0x100000>;
-
-				reg-names = "parf", "dbi", "elbi","config";
-
-				phys = <&pciephy_2>;
-				phy-names = "pciephy";
-
-				#address-cells = <3>;
-				#size-cells = <2>;
-				ranges = <0x01000000 0x0 0x0e200000 0x0e200000 0x0 0x100000>,
-					<0x02000000 0x0 0x0e300000 0x0e300000 0x0 0x1d00000>;
-
-				device_type = "pci";
-
-				interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "msi";
-				#interrupt-cells = <1>;
-				interrupt-map-mask = <0 0 0 0x7>;
-				interrupt-map = <0 0 0 1 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-						<0 0 0 2 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-						<0 0 0 3 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-						<0 0 0 4 &intc 0 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
-
-				pinctrl-names = "default", "sleep";
-				pinctrl-0 = <&pcie2_clkreq_default &pcie2_perst_default &pcie2_wake_default>;
-				pinctrl-1 = <&pcie2_clkreq_sleep &pcie2_perst_default &pcie2_wake_sleep >;
-
-				vdda-supply = <&pm8994_l28>;
-
-				linux,pci-domain = <2>;
-				clocks = <&gcc GCC_PCIE_2_PIPE_CLK>,
-					<&gcc GCC_PCIE_2_AUX_CLK>,
-					<&gcc GCC_PCIE_2_CFG_AHB_CLK>,
-					<&gcc GCC_PCIE_2_MSTR_AXI_CLK>,
-					<&gcc GCC_PCIE_2_SLV_AXI_CLK>;
-
-				clock-names =  "pipe",
-						"aux",
-						"cfg",
-						"bus_master",
-						"bus_slave";
-			};
-		};
-
-		slimbam:dma@9184000
-		{
+		slimbam: dma@9184000 {
 			compatible = "qcom,bam-v1.7.0";
 			qcom,controlled-remotely;
-			reg = <0x9184000 0x32000>;
+			reg = <0x09184000 0x32000>;
 			num-channels  = <31>;
 			interrupts = <0 164 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
@@ -2025,7 +1952,7 @@
 
 		slim_msm: slim@91c0000 {
 			compatible = "qcom,slim-ngd-v1.5.0";
-			reg = <0x91c0000 0x2C000>;
+			reg = <0x091c0000 0x2C000>;
 			reg-names = "ctrl";
 			interrupts = <0 163 IRQ_TYPE_LEVEL_HIGH>;
 			dmas =	<&slimbam 3>, <&slimbam 4>,
@@ -2060,433 +1987,418 @@
 
 					slim-ifc-dev  = <&tasha_ifd>;
 
-					vdd-buck-supply = <&pm8994_s4>;
-					vdd-buck-sido-supply = <&pm8994_s4>;
-					vdd-tx-supply = <&pm8994_s4>;
-					vdd-rx-supply = <&pm8994_s4>;
-					vdd-io-supply = <&pm8994_s4>;
-
 					#sound-dai-cells = <1>;
 				};
 			};
 		};
 
-		gpu@b00000 {
-			compatible = "qcom,adreno-530.2", "qcom,adreno";
-			#stream-id-cells = <16>;
+		adsp_pil: remoteproc@9300000 {
+			compatible = "qcom,msm8996-adsp-pil";
+			reg = <0x09300000 0x80000>;
 
-			reg = <0xb00000 0x3f000>;
-			reg-names = "kgsl_3d0_reg_memory";
+			interrupts-extended = <&intc 0 162 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
 
-			interrupts = <0 300 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&xo_board>;
+			clock-names = "xo";
 
-			clocks = <&mmcc GPU_GX_GFX3D_CLK>,
-				<&mmcc GPU_AHB_CLK>,
-				<&mmcc GPU_GX_RBBMTIMER_CLK>,
-				<&gcc GCC_BIMC_GFX_CLK>,
-				<&gcc GCC_MMSS_BIMC_GFX_CLK>;
+			memory-region = <&adsp_region>;
 
-			clock-names = "core",
-				"iface",
-				"rbbmtimer",
-				"mem",
-				"mem_iface";
+			qcom,smem-states = <&smp2p_adsp_out 0>;
+			qcom,smem-state-names = "stop";
 
-			power-domains = <&mmcc GPU_GDSC>;
-			iommus = <&adreno_smmu 0>;
+			smd-edge {
+				interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
 
-			nvmem-cells = <&gpu_speed_bin>;
-			nvmem-cell-names = "speed_bin";
+				label = "lpass";
+				mboxes = <&apcs_glb 8>;
+				qcom,smd-edge = <1>;
+				qcom,remote-pid = <2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				apr {
+					power-domains = <&gcc HLOS1_VOTE_LPASS_ADSP_GDSC>;
+					compatible = "qcom,apr-v2";
+					qcom,smd-channels = "apr_audio_svc";
+					qcom,apr-domain = <APR_DOMAIN_ADSP>;
+					#address-cells = <1>;
+					#size-cells = <0>;
 
-			qcom,gpu-quirk-two-pass-use-wfi;
-			qcom,gpu-quirk-fault-detect-mask;
+					q6core {
+						reg = <APR_SVC_ADSP_CORE>;
+						compatible = "qcom,q6core";
+					};
 
-			operating-points-v2 = <&gpu_opp_table>;
+					q6afe: q6afe {
+						compatible = "qcom,q6afe";
+						reg = <APR_SVC_AFE>;
+						q6afedai: dais {
+							compatible = "qcom,q6afe-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+							hdmi@1 {
+								reg = <1>;
+							};
+						};
+					};
 
-			gpu_opp_table: opp-table {
-				compatible  ="operating-points-v2";
+					q6asm: q6asm {
+						compatible = "qcom,q6asm";
+						reg = <APR_SVC_ASM>;
+						q6asmdai: dais {
+							compatible = "qcom,q6asm-dais";
+							#sound-dai-cells = <1>;
+							iommus = <&lpass_q6_smmu 1>;
+						};
+					};
 
-				/*
-				 * 624Mhz and 560Mhz are only available on speed
-				 * bin (1 << 0). All the rest are available on
-				 * all bins of the hardware
-				 */
-				opp-624000000 {
-					opp-hz = /bits/ 64 <624000000>;
-					opp-supported-hw = <0x01>;
-				};
-				opp-560000000 {
-					opp-hz = /bits/ 64 <560000000>;
-					opp-supported-hw = <0x01>;
-				};
-				opp-510000000 {
-					opp-hz = /bits/ 64 <510000000>;
-					opp-supported-hw = <0xFF>;
-				};
-				opp-401800000 {
-					opp-hz = /bits/ 64 <401800000>;
-					opp-supported-hw = <0xFF>;
-				};
-				opp-315000000 {
-					opp-hz = /bits/ 64 <315000000>;
-					opp-supported-hw = <0xFF>;
-				};
-				opp-214000000 {
-					opp-hz = /bits/ 64 <214000000>;
-					opp-supported-hw = <0xFF>;
-				};
-				opp-133000000 {
-					opp-hz = /bits/ 64 <133000000>;
-					opp-supported-hw = <0xFF>;
+					q6adm: q6adm {
+						compatible = "qcom,q6adm";
+						reg = <APR_SVC_ADM>;
+						q6routing: routing {
+							compatible = "qcom,q6adm-routing";
+							#sound-dai-cells = <0>;
+						};
+					};
 				};
-			};
 
-			zap-shader {
-				memory-region = <&zap_shader_region>;
 			};
 		};
 
-		mdss: mdss@900000 {
-			compatible = "qcom,mdss";
-
-			reg = <0x900000 0x1000>,
-			      <0x9b0000 0x1040>,
-			      <0x9b8000 0x1040>;
-			reg-names = "mdss_phys",
-				    "vbif_phys",
-				    "vbif_nrt_phys";
-
-			power-domains = <&mmcc MDSS_GDSC>;
-			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-
-			interrupt-controller;
-			#interrupt-cells = <1>;
+		apcs_glb: mailbox@9820000 {
+			compatible = "qcom,msm8996-apcs-hmss-global";
+			reg = <0x09820000 0x1000>;
 
-			clocks = <&mmcc MDSS_AHB_CLK>;
-			clock-names = "iface";
+			#mbox-cells = <1>;
+		};
 
+		timer@9840000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x09840000 0x1000>;
+			clock-frequency = <19200000>;
 
-			mdp: mdp@901000 {
-				compatible = "qcom,mdp5";
-				reg = <0x901000 0x90000>;
-				reg-names = "mdp_phys";
+			frame@9850000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x09850000 0x1000>,
+				      <0x09860000 0x1000>;
+			};
 
-				interrupt-parent = <&mdss>;
-				interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+			frame@9870000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x09870000 0x1000>;
+				status = "disabled";
+			};
 
-				clocks = <&mmcc MDSS_AHB_CLK>,
-					 <&mmcc MDSS_AXI_CLK>,
-					 <&mmcc MDSS_MDP_CLK>,
-					 <&mmcc SMMU_MDP_AXI_CLK>,
-					 <&mmcc MDSS_VSYNC_CLK>;
-				clock-names = "iface",
-					      "bus",
-					      "core",
-					      "iommu",
-					      "vsync";
+			frame@9880000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x09880000 0x1000>;
+				status = "disabled";
+			};
 
-				iommus = <&mdp_smmu 0>;
+			frame@9890000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x09890000 0x1000>;
+				status = "disabled";
+			};
 
-				ports {
-					#address-cells = <1>;
-					#size-cells = <0>;
+			frame@98a0000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x098a0000 0x1000>;
+				status = "disabled";
+			};
 
-					port@0 {
-						reg = <0>;
-						mdp5_intf3_out: endpoint {
-							remote-endpoint = <&hdmi_in>;
-						};
-					};
-				};
+			frame@98b0000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x098b0000 0x1000>;
+				status = "disabled";
 			};
 
-			hdmi: hdmi-tx@9a0000 {
-				compatible = "qcom,hdmi-tx-8996";
-				reg =	<0x009a0000 0x50c>,
-					<0x00070000 0x6158>,
-					<0x009e0000 0xfff>;
-				reg-names = "core_physical",
-					    "qfprom_physical",
-					    "hdcp_physical";
+			frame@98c0000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x098c0000 0x1000>;
+				status = "disabled";
+			};
+		};
 
-				interrupt-parent = <&mdss>;
-				interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+		saw3: syscon@9a10000 {
+			compatible = "syscon";
+			reg = <0x09a10000 0x1000>;
+		};
 
-				clocks = <&mmcc MDSS_MDP_CLK>,
-					 <&mmcc MDSS_AHB_CLK>,
-					 <&mmcc MDSS_HDMI_CLK>,
-					 <&mmcc MDSS_HDMI_AHB_CLK>,
-					 <&mmcc MDSS_EXTPCLK_CLK>;
-				clock-names =
-					"mdp_core",
-					"iface",
-					"core",
-					"alt_iface",
-					"extp";
+		intc: interrupt-controller@9bc0000 {
+			compatible = "qcom,msm8996-gic-v3", "arm,gic-v3";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			#redistributor-regions = <1>;
+			redistributor-stride = <0x0 0x40000>;
+			reg = <0x09bc0000 0x10000>,
+			      <0x09c00000 0x100000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
 
-				phys = <&hdmi_phy>;
-				phy-names = "hdmi_phy";
-				#sound-dai-cells = <1>;
+	sound: sound {
+	};
 
-				ports {
-					#address-cells = <1>;
-					#size-cells = <0>;
+	thermal-zones {
+		cpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
 
-					port@0 {
-						reg = <0>;
-						hdmi_in: endpoint {
-							remote-endpoint = <&mdp5_intf3_out>;
-						};
-					};
-				};
-			};
+			thermal-sensors = <&tsens0 3>;
 
-			hdmi_phy: hdmi-phy@9a0600 {
-				#phy-cells = <0>;
-				compatible = "qcom,hdmi-phy-8996";
-				reg = <0x9a0600 0x1c4>,
-				      <0x9a0a00 0x124>,
-				      <0x9a0c00 0x124>,
-				      <0x9a0e00 0x124>,
-				      <0x9a1000 0x124>,
-				      <0x9a1200 0x0c8>;
-				reg-names = "hdmi_pll",
-					    "hdmi_tx_l0",
-					    "hdmi_tx_l1",
-					    "hdmi_tx_l2",
-					    "hdmi_tx_l3",
-					    "hdmi_phy";
+			trips {
+				cpu0_alert0: trip-point@0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
 
-				clocks = <&mmcc MDSS_AHB_CLK>,
-					 <&gcc GCC_HDMI_CLKREF_CLK>;
-				clock-names = "iface",
-					      "ref";
+				cpu0_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
 			};
 		};
 
-		venus_smmu: arm,smmu-venus@d40000 {
-			compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
-			reg = <0xd40000 0x20000>;
-			#global-interrupts = <1>;
-			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
-			power-domains = <&mmcc MMAGIC_VIDEO_GDSC>;
-			clocks = <&mmcc SMMU_VIDEO_AHB_CLK>,
-				 <&mmcc SMMU_VIDEO_AXI_CLK>;
-			clock-names = "iface", "bus";
-			#iommu-cells = <1>;
-			status = "okay";
-		};
+		cpu1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
 
-		video-codec@c00000 {
-			compatible = "qcom,msm8996-venus";
-			reg = <0x00c00000 0xff000>;
-			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
-			power-domains = <&mmcc VENUS_GDSC>;
-			clocks = <&mmcc VIDEO_CORE_CLK>,
-				 <&mmcc VIDEO_AHB_CLK>,
-				 <&mmcc VIDEO_AXI_CLK>,
-				 <&mmcc VIDEO_MAXI_CLK>;
-			clock-names = "core", "iface", "bus", "mbus";
-			iommus = <&venus_smmu 0x00>,
-				 <&venus_smmu 0x01>,
-				 <&venus_smmu 0x0a>,
-				 <&venus_smmu 0x07>,
-				 <&venus_smmu 0x0e>,
-				 <&venus_smmu 0x0f>,
-				 <&venus_smmu 0x08>,
-				 <&venus_smmu 0x09>,
-				 <&venus_smmu 0x0b>,
-				 <&venus_smmu 0x0c>,
-				 <&venus_smmu 0x0d>,
-				 <&venus_smmu 0x10>,
-				 <&venus_smmu 0x11>,
-				 <&venus_smmu 0x21>,
-				 <&venus_smmu 0x28>,
-				 <&venus_smmu 0x29>,
-				 <&venus_smmu 0x2b>,
-				 <&venus_smmu 0x2c>,
-				 <&venus_smmu 0x2d>,
-				 <&venus_smmu 0x31>;
-			memory-region = <&venus_region>;
-			status = "okay";
+			thermal-sensors = <&tsens0 5>;
 
-			video-decoder {
-				compatible = "venus-decoder";
-				clocks = <&mmcc VIDEO_SUBCORE0_CLK>;
-				clock-names = "core";
-				power-domains = <&mmcc VENUS_CORE0_GDSC>;
-			};
+			trips {
+				cpu1_alert0: trip-point@0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
 
-			video-encoder {
-				compatible = "venus-encoder";
-				clocks = <&mmcc VIDEO_SUBCORE1_CLK>;
-				clock-names = "core";
-				power-domains = <&mmcc VENUS_CORE1_GDSC>;
+				cpu1_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
 			};
 		};
-	};
-
-	sound: sound {
-	};
-
-	adsp-pil {
-		compatible = "qcom,msm8996-adsp-pil";
 
-		interrupts-extended = <&intc 0 162 IRQ_TYPE_EDGE_RISING>,
-				      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
-				      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
-				      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
-				      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
-		interrupt-names = "wdog", "fatal", "ready",
-				  "handover", "stop-ack";
+		cpu2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
 
-		clocks = <&xo_board>;
-		clock-names = "xo";
+			thermal-sensors = <&tsens0 8>;
 
-		memory-region = <&adsp_region>;
+			trips {
+				cpu2_alert0: trip-point@0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
 
-		qcom,smem-states = <&adsp_smp2p_out 0>;
-		qcom,smem-state-names = "stop";
+				cpu2_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
 
-		smd-edge {
-			interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
+		cpu3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
 
-			label = "lpass";
-			mboxes = <&apcs_glb 8>;
-			qcom,smd-edge = <1>;
-			qcom,remote-pid = <2>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			apr {
-				power-domains = <&gcc HLOS1_VOTE_LPASS_ADSP_GDSC>;
-				compatible = "qcom,apr-v2";
-				qcom,smd-channels = "apr_audio_svc";
-				qcom,apr-domain = <APR_DOMAIN_ADSP>;
-				#address-cells = <1>;
-				#size-cells = <0>;
+			thermal-sensors = <&tsens0 10>;
 
-				q6core {
-					reg = <APR_SVC_ADSP_CORE>;
-					compatible = "qcom,q6core";
-				};
-
-				q6afe: q6afe {
-					compatible = "qcom,q6afe";
-					reg = <APR_SVC_AFE>;
-					q6afedai: dais {
-						compatible = "qcom,q6afe-dais";
-						#address-cells = <1>;
-						#size-cells = <0>;
-						#sound-dai-cells = <1>;
-						hdmi@1 {
-							reg = <1>;
-						};
-					};
+			trips {
+				cpu3_alert0: trip-point@0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
 				};
 
-				q6asm: q6asm {
-					compatible = "qcom,q6asm";
-					reg = <APR_SVC_ASM>;
-					q6asmdai: dais {
-						compatible = "qcom,q6asm-dais";
-						#sound-dai-cells = <1>;
-						iommus = <&lpass_q6_smmu 1>;
-					};
+				cpu3_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
 				};
+			};
+		};
 
-				q6adm: q6adm {
-					compatible = "qcom,q6adm";
-					reg = <APR_SVC_ADM>;
-					q6routing: routing {
-						compatible = "qcom,q6adm-routing";
-						#sound-dai-cells = <0>;
-					};
+		gpu-thermal-top {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 6>;
+
+			trips {
+				gpu1_alert0: trip-point@0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
 				};
 			};
-
 		};
-	};
 
-	adsp-smp2p {
-		compatible = "qcom,smp2p";
-		qcom,smem = <443>, <429>;
+		gpu-thermal-bottom {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
 
-		interrupts = <0 158 IRQ_TYPE_EDGE_RISING>;
+			thermal-sensors = <&tsens1 7>;
 
-		mboxes = <&apcs_glb 10>;
+			trips {
+				gpu2_alert0: trip-point@0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
 
-		qcom,local-pid = <0>;
-		qcom,remote-pid = <2>;
+		m4m-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
 
-		adsp_smp2p_out: master-kernel {
-			qcom,entry-name = "master-kernel";
-			#qcom,smem-state-cells = <1>;
+			thermal-sensors = <&tsens0 1>;
+
+			trips {
+				m4m_alert0: trip-point@0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
 		};
 
-		adsp_smp2p_in: slave-kernel {
-			qcom,entry-name = "slave-kernel";
+		l3-or-venus-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
 
-			interrupt-controller;
-			#interrupt-cells = <2>;
+			thermal-sensors = <&tsens0 2>;
+
+			trips {
+				l3_or_venus_alert0: trip-point@0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
 		};
-	};
 
-	modem-smp2p {
-		compatible = "qcom,smp2p";
-		qcom,smem = <435>, <428>;
+		cluster0-l2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
 
-		interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>;
+			thermal-sensors = <&tsens0 7>;
 
-		mboxes = <&apcs_glb 14>;
+			trips {
+				cluster0_l2_alert0: trip-point@0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
 
-		qcom,local-pid = <0>;
-		qcom,remote-pid = <1>;
+		cluster1-l2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
 
-		modem_smp2p_out: master-kernel {
-			qcom,entry-name = "master-kernel";
-			#qcom,smem-state-cells = <1>;
+			thermal-sensors = <&tsens0 12>;
+
+			trips {
+				cluster1_l2_alert0: trip-point@0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
 		};
 
-		modem_smp2p_in: slave-kernel {
-			qcom,entry-name = "slave-kernel";
+		camera-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
 
-			interrupt-controller;
-			#interrupt-cells = <2>;
+			thermal-sensors = <&tsens1 1>;
+
+			trips {
+				camera_alert0: trip-point@0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
 		};
-	};
 
-	smp2p-slpi {
-		compatible = "qcom,smp2p";
-		qcom,smem = <481>, <430>;
+		q6-dsp-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
 
-		interrupts = <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>;
+			thermal-sensors = <&tsens1 2>;
 
-		mboxes = <&apcs_glb 26>;
+			trips {
+				q6_dsp_alert0: trip-point@0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
 
-		qcom,local-pid = <0>;
-		qcom,remote-pid = <3>;
+		mem-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
 
-		slpi_smp2p_in: slave-kernel {
-			qcom,entry-name = "slave-kernel";
-			interrupt-controller;
-			#interrupt-cells = <2>;
+			thermal-sensors = <&tsens1 3>;
+
+			trips {
+				mem_alert0: trip-point@0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
 		};
 
-		slpi_smp2p_out: master-kernel {
-			qcom,entry-name = "master-kernel";
-			#qcom,smem-state-cells = <1>;
+		modemtx-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 4>;
+
+			trips {
+				modemtx_alert0: trip-point@0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
 		};
 	};
 
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
 };
 #include "msm8996-pins.dtsi"
diff --git a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi
index 6138b58db6d2..6ab830d01867 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi
@@ -74,6 +74,23 @@
 	cpu-idle-states = <&BIG_CPU_SLEEP_1>;
 };
 
+&pm8005_lsid1 {
+	pm8005-regulators {
+		compatible = "qcom,pm8005-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+
+		pm8005_s1: s1 { /* VDD_GFX supply */
+			regulator-min-microvolt = <524000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-enable-ramp-delay = <500>;
+
+			/* hack until we rig up the gpu consumer */
+			regulator-always-on;
+		};
+	};
+};
+
 &qusb2phy {
 	status = "okay";
 
@@ -292,3 +309,35 @@
 	vdda-phy-supply = <&vreg_l1a_0p875>;
 	vdda-pll-supply = <&vreg_l2a_1p2>;
 };
+
+&wifi {
+	status = "okay";
+
+	vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
+	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
+	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+};
+
+/* PINCTRL - board-specific pinctrl */
+&blsp1_uart3_on {
+	rx {
+		/delete-property/ bias-disable;
+		/*
+		 * Configure a pull-up on 45 (RX). This is needed to
+		 * avoid garbage data when the TX pin of the Bluetooth
+		 * module is in tri-state (module powered off or not
+		 * driving the signal yet).
+		 */
+		bias-pull-up;
+	};
+
+	cts {
+		/delete-property/ bias-disable;
+		/*
+		 * Configure a pull-down on 47 (CTS) to match the pull
+		 * of the Bluetooth module.
+		 */
+		bias-pull-down;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
index 5f101a20a20a..0e0b9bc12945 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
@@ -9,6 +9,7 @@
 / {
 	aliases {
 		serial0 = &blsp2_uart1;
+		serial1 = &blsp1_uart3;
 	};
 
 	chosen {
@@ -311,6 +312,14 @@
 	};
 };
 
+&remoteproc_adsp {
+	status = "okay";
+};
+
+&remoteproc_slpi {
+	status = "okay";
+};
+
 &tlmm {
 	gpio-reserved-ranges = <0 4>, <81 4>;
 };
@@ -364,3 +373,35 @@
 	vdda-phy-supply = <&vreg_l1a_0p875>;
 	vdda-pll-supply = <&vreg_l2a_1p2>;
 };
+
+&wifi {
+	status = "okay";
+
+	vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
+	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
+	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+};
+
+/* PINCTRL - board-specific pinctrl */
+&blsp1_uart3_on {
+	rx {
+		/delete-property/ bias-disable;
+		/*
+		 * Configure a pull-up on 45 (RX). This is needed to
+		 * avoid garbage data when the TX pin of the Bluetooth
+		 * module is in tri-state (module powered off or not
+		 * driving the signal yet).
+		 */
+		bias-pull-up;
+	};
+
+	cts {
+		/delete-property/ bias-disable;
+		/*
+		 * Configure a pull-down on 47 (CTS) to match the pull
+		 * of the Bluetooth module.
+		 */
+		bias-pull-down;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8998-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8998-pins.dtsi
index e32d3ab395ea..7c222cbf19d9 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-pins.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-pins.dtsi
@@ -77,13 +77,30 @@
 	};
 
 	blsp1_uart3_on: blsp1_uart3_on {
-		mux {
-			pins = "gpio45", "gpio46", "gpio47", "gpio48";
+		tx {
+			pins = "gpio45";
 			function = "blsp_uart3_a";
+			drive-strength = <2>;
+			bias-disable;
 		};
 
-		config {
-			pins = "gpio45", "gpio46", "gpio47", "gpio48";
+		rx {
+			pins = "gpio46";
+			function = "blsp_uart3_a";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		cts {
+			pins = "gpio47";
+			function = "blsp_uart3_a";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		rfr {
+			pins = "gpio48";
+			function = "blsp_uart3_a";
 			drive-strength = <2>;
 			bias-disable;
 		};
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index fc7838ea9a01..91f7f2d07597 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -3,6 +3,7 @@
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,gcc-msm8998.h>
+#include <dt-bindings/clock/qcom,gpucc-msm8998.h>
 #include <dt-bindings/clock/qcom,rpmcc.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/gpio/gpio.h>
@@ -28,8 +29,13 @@
 		#size-cells = <2>;
 		ranges;
 
-		memory@85800000 {
-			reg = <0x0 0x85800000 0x0 0x800000>;
+		hyp_mem: memory@85800000 {
+			reg = <0x0 0x85800000 0x0 0x600000>;
+			no-map;
+		};
+
+		xbl_mem: memory@85e00000 {
+			reg = <0x0 0x85e00000 0x0 0x100000>;
 			no-map;
 		};
 
@@ -38,21 +44,69 @@
 			no-map;
 		};
 
-		memory@86200000 {
+		tz_mem: memory@86200000 {
 			reg = <0x0 0x86200000 0x0 0x2d00000>;
 			no-map;
 		};
 
-		rmtfs {
+		rmtfs_mem: memory@88f00000 {
 			compatible = "qcom,rmtfs-mem";
-
-			size = <0x0 0x200000>;
-			alloc-ranges = <0x0 0xa0000000 0x0 0x2000000>;
+			reg = <0x0 0x88f00000 0x0 0x200000>;
 			no-map;
 
 			qcom,client-id = <1>;
 			qcom,vmid = <15>;
 		};
+
+		spss_mem: memory@8ab00000 {
+			reg = <0x0 0x8ab00000 0x0 0x700000>;
+			no-map;
+		};
+
+		adsp_mem: memory@8b200000 {
+			reg = <0x0 0x8b200000 0x0 0x1a00000>;
+			no-map;
+		};
+
+		mpss_mem: memory@8cc00000 {
+			reg = <0x0 0x8cc00000 0x0 0x7000000>;
+			no-map;
+		};
+
+		venus_mem: memory@93c00000 {
+			reg = <0x0 0x93c00000 0x0 0x500000>;
+			no-map;
+		};
+
+		mba_mem: memory@94100000 {
+			reg = <0x0 0x94100000 0x0 0x200000>;
+			no-map;
+		};
+
+		slpi_mem: memory@94300000 {
+			reg = <0x0 0x94300000 0x0 0xf00000>;
+			no-map;
+		};
+
+		ipa_fw_mem: memory@95200000 {
+			reg = <0x0 0x95200000 0x0 0x10000>;
+			no-map;
+		};
+
+		ipa_gsi_mem: memory@95210000 {
+			reg = <0x0 0x95210000 0x0 0x5000>;
+			no-map;
+		};
+
+		gpu_mem: memory@95600000 {
+			reg = <0x0 0x95600000 0x0 0x100000>;
+			no-map;
+		};
+
+		wlan_msa_mem: memory@95700000 {
+			reg = <0x0 0x95700000 0x0 0x100000>;
+			no-map;
+		};
 	};
 
 	clocks {
@@ -817,8 +871,9 @@
 			reg = <0x010ab000 0x1000>, /* TM */
 			      <0x010aa000 0x1000>; /* SROT */
 			#qcom,sensors = <14>;
-			interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "uplow";
+			interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
 			#thermal-sensor-cells = <1>;
 		};
 
@@ -827,8 +882,9 @@
 			reg = <0x010ae000 0x1000>, /* TM */
 			      <0x010ad000 0x1000>; /* SROT */
 			#qcom,sensors = <8>;
-			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "uplow";
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
 			#thermal-sensor-cells = <1>;
 		};
 
@@ -847,6 +903,25 @@
 				<GIC_SPI 369 IRQ_TYPE_EDGE_RISING>;
 		};
 
+		anoc2_smmu: iommu@16c0000 {
+			compatible = "qcom,msm8998-smmu-v2", "qcom,smmu-v2";
+			reg = <0x016c0000 0x40000>;
+			#iommu-cells = <1>;
+
+			#global-interrupts = <0>;
+			interrupts =
+				<GIC_SPI 373 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 374 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 375 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 376 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 377 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 378 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 462 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 463 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 464 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 465 IRQ_TYPE_EDGE_RISING>;
+		};
+
 		pcie0: pci@1c00000 {
 			compatible = "qcom,pcie-msm8996";
 			reg =	<0x01c00000 0x2000>,
@@ -987,7 +1062,7 @@
 
 		tcsr_mutex_regs: syscon@1f40000 {
 			compatible = "syscon";
-			reg = <0x01f40000 0x20000>;
+			reg = <0x01f40000 0x40000>;
 		};
 
 		tlmm: pinctrl@3400000 {
@@ -1000,6 +1075,110 @@
 			#interrupt-cells = <0x2>;
 		};
 
+		remoteproc_mss: remoteproc@4080000 {
+			compatible = "qcom,msm8998-mss-pil";
+			reg = <0x04080000 0x100>, <0x04180000 0x20>;
+			reg-names = "qdsp6", "rmb";
+
+			interrupts-extended =
+				<&intc GIC_SPI 448 IRQ_TYPE_EDGE_RISING>,
+				<&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+				<&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+				<&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+				<&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+				<&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack",
+					  "shutdown-ack";
+
+			clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
+				 <&gcc GCC_BIMC_MSS_Q6_AXI_CLK>,
+				 <&gcc GCC_BOOT_ROM_AHB_CLK>,
+				 <&gcc GCC_MSS_GPLL0_DIV_CLK_SRC>,
+				 <&gcc GCC_MSS_SNOC_AXI_CLK>,
+				 <&gcc GCC_MSS_MNOC_BIMC_AXI_CLK>,
+				 <&rpmcc RPM_SMD_QDSS_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "iface", "bus", "mem", "gpll0_mss",
+				      "snoc_axi", "mnoc_axi", "qdss", "xo";
+
+			qcom,smem-states = <&modem_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			resets = <&gcc GCC_MSS_RESTART>;
+			reset-names = "mss_restart";
+
+			qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>;
+
+			power-domains = <&rpmpd MSM8998_VDDCX>,
+					<&rpmpd MSM8998_VDDMX>;
+			power-domain-names = "cx", "mx";
+
+			mba {
+				memory-region = <&mba_mem>;
+			};
+
+			mpss {
+				memory-region = <&mpss_mem>;
+			};
+
+			glink-edge {
+				interrupts = <GIC_SPI 452 IRQ_TYPE_EDGE_RISING>;
+				label = "modem";
+				qcom,remote-pid = <1>;
+				mboxes = <&apcs_glb 15>;
+			};
+		};
+
+		gpucc: clock-controller@5065000 {
+			compatible = "qcom,msm8998-gpucc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			reg = <0x05065000 0x9000>;
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&gcc GPLL0_OUT_MAIN>;
+			clock-names = "xo",
+				      "gpll0";
+		};
+
+		remoteproc_slpi: remoteproc@5800000 {
+			compatible = "qcom,msm8998-slpi-pas";
+			reg = <0x05800000 0x4040>;
+
+			interrupts-extended = <&intc GIC_SPI 390 IRQ_TYPE_EDGE_RISING>,
+					      <&slpi_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&slpi_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&slpi_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&slpi_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			px-supply = <&vreg_lvs2a_1p8>;
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
+			clock-names = "xo", "aggre2";
+
+			memory-region = <&slpi_mem>;
+
+			qcom,smem-states = <&slpi_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			power-domains = <&rpmpd MSM8998_SSCCX>;
+			power-domain-names = "ssc_cx";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts = <GIC_SPI 179 IRQ_TYPE_EDGE_RISING>;
+				label = "dsps";
+				qcom,remote-pid = <3>;
+				mboxes = <&apcs_glb 27>;
+			};
+		};
+
 		stm: stm@6002000 {
 			compatible = "arm,coresight-stm", "arm,primecell";
 			reg = <0x06002000 0x1000>,
@@ -1792,6 +1971,39 @@
 			#size-cells = <0>;
 		};
 
+		remoteproc_adsp: remoteproc@17300000 {
+			compatible = "qcom,msm8998-adsp-pas";
+			reg = <0x17300000 0x4040>;
+
+			interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "xo";
+
+			memory-region = <&adsp_mem>;
+
+			qcom,smem-states = <&adsp_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			power-domains = <&rpmpd MSM8998_VDDCX>;
+			power-domain-names = "cx";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>;
+				label = "lpass";
+				qcom,remote-pid = <2>;
+				mboxes = <&apcs_glb 9>;
+			};
+		};
+
 		apcs_glb: mailbox@17911000 {
 			compatible = "qcom,msm8998-apcs-hmss-global";
 			reg = <0x17911000 0x1000>;
@@ -1870,6 +2082,32 @@
 			redistributor-stride = <0x0 0x20000>;
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 		};
+
+		wifi: wifi@18800000 {
+			compatible = "qcom,wcn3990-wifi";
+			status = "disabled";
+			reg = <0x18800000 0x800000>;
+			reg-names = "membase";
+			memory-region = <&wlan_msa_mem>;
+			clocks = <&rpmcc RPM_SMD_RF_CLK2_PIN>;
+			clock-names = "cxo_ref_clk_pin";
+			interrupts =
+				<GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
+			iommus = <&anoc2_smmu 0x1900>,
+				 <&anoc2_smmu 0x1901>;
+			qcom,snoc-host-cap-8bit-quirk;
+		};
 	};
 };
 
diff --git a/arch/arm64/boot/dts/qcom/pm6150.dtsi b/arch/arm64/boot/dts/qcom/pm6150.dtsi
new file mode 100644
index 000000000000..23534639f455
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm6150.dtsi
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: BSD-3-Clause
+// Copyright (c) 2019, The Linux Foundation. All rights reserved.
+
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/thermal/thermal.h>
+
+&spmi_bus {
+	pm6150_lsid0: pmic@0 {
+		compatible = "qcom,pm6150", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm6150_pon: pon@800 {
+			compatible = "qcom,pm8998-pon";
+			reg = <0x800>;
+			mode-bootloader = <0x2>;
+			mode-recovery = <0x1>;
+
+			pwrkey {
+				compatible = "qcom,pm8941-pwrkey";
+				interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				linux,code = <KEY_POWER>;
+			};
+		};
+
+		pm6150_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;
+			io-channels = <&pm6150_adc ADC5_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm6150_adc: adc@3100 {
+			compatible = "qcom,spmi-adc5";
+			reg = <0x3100>;
+			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+
+			adc-chan@6 {
+				reg = <ADC5_DIE_TEMP>;
+				label = "die_temp";
+			};
+		};
+
+		pm6150_gpio: gpios@c000 {
+			compatible = "qcom,pm6150-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pm6150_gpio 0 0 10>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pm6150_lsid1: pmic@1 {
+		compatible = "qcom,pm6150", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm6150l.dtsi b/arch/arm64/boot/dts/qcom/pm6150l.dtsi
new file mode 100644
index 000000000000..f84027b505d1
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm6150l.dtsi
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: BSD-3-Clause
+// Copyright (c) 2019, The Linux Foundation. All rights reserved.
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+	pm6150l_lsid4: pmic@4 {
+		compatible = "qcom,pm6150l", "qcom,spmi-pmic";
+		reg = <0x4 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm6150l_gpio: gpios@c000 {
+			compatible = "qcom,pm6150l-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pm6150l_gpio 0 0 12>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pm6150l_lsid5: pmic@5 {
+		compatible = "qcom,pm6150l", "qcom,spmi-pmic";
+		reg = <0x5 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm8004.dtsi b/arch/arm64/boot/dts/qcom/pm8004.dtsi
index 297b57bfa87a..0abd1abe12fc 100644
--- a/arch/arm64/boot/dts/qcom/pm8004.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8004.dtsi
@@ -4,17 +4,23 @@
 
 &spmi_bus {
 
-	pmic@4 {
+	pm8004_lsid4: pmic@4 {
 		compatible = "qcom,pm8004", "qcom,spmi-pmic";
 		reg = <0x4 SPMI_USID>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		status = "disabled";
 	};
 
-	pmic@5 {
+	pm8004_lsid5: pmic@5 {
 		compatible = "qcom,pm8004", "qcom,spmi-pmic";
 		reg = <0x5 SPMI_USID>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		status = "disabled";
+
+		pm8004_spmi_regulators: regulators {
+			compatible = "qcom,pm8004-regulators";
+		};
 	};
 };
diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi
index 9dd2df1cbf47..0bcdf0471107 100644
--- a/arch/arm64/boot/dts/qcom/pm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi
@@ -111,6 +111,12 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		pm8916_vib: vibrator@c000 {
+			compatible = "qcom,pm8916-vib";
+			reg = <0xc000>;
+			status = "disabled";
+		};
+
 		wcd_codec: codec@f000 {
 			compatible = "qcom,pm8916-wcd-analog-codec";
 			reg = <0xf000 0x200>;
diff --git a/arch/arm64/boot/dts/qcom/pm8994.dtsi b/arch/arm64/boot/dts/qcom/pm8994.dtsi
index 76b5a3e6a2b5..7e4f777746cb 100644
--- a/arch/arm64/boot/dts/qcom/pm8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8994.dtsi
@@ -85,5 +85,9 @@
 		reg = <0x1 SPMI_USID>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+
+		pm8994_spmi_regulators: regulators {
+			compatible = "qcom,pm8994-regulators";
+		};
 	};
 };
diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
index 501a7330dbc8..522d3ef72df5 100644
--- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
@@ -73,6 +73,7 @@
 		regulator-always-on;
 		regulator-boot-on;
 		regulator-name = "vdd_apc";
+		regulator-initial-mode = <1>;
 		regulator-min-microvolt = <1048000>;
 		regulator-max-microvolt = <1384000>;
 	};
diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index f5f0c4c9cb16..4ee1e3d5f123 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -42,6 +42,10 @@
 			cpu-idle-states = <&CPU_SLEEP_0>;
 			next-level-cache = <&L2_0>;
 			#cooling-cells = <2>;
+			clocks = <&apcs_glb>;
+			operating-points-v2 = <&cpu_opp_table>;
+			power-domains = <&cpr>;
+			power-domain-names = "cpr";
 		};
 
 		CPU1: cpu@101 {
@@ -52,6 +56,10 @@
 			cpu-idle-states = <&CPU_SLEEP_0>;
 			next-level-cache = <&L2_0>;
 			#cooling-cells = <2>;
+			clocks = <&apcs_glb>;
+			operating-points-v2 = <&cpu_opp_table>;
+			power-domains = <&cpr>;
+			power-domain-names = "cpr";
 		};
 
 		CPU2: cpu@102 {
@@ -62,6 +70,10 @@
 			cpu-idle-states = <&CPU_SLEEP_0>;
 			next-level-cache = <&L2_0>;
 			#cooling-cells = <2>;
+			clocks = <&apcs_glb>;
+			operating-points-v2 = <&cpu_opp_table>;
+			power-domains = <&cpr>;
+			power-domain-names = "cpr";
 		};
 
 		CPU3: cpu@103 {
@@ -72,6 +84,10 @@
 			cpu-idle-states = <&CPU_SLEEP_0>;
 			next-level-cache = <&L2_0>;
 			#cooling-cells = <2>;
+			clocks = <&apcs_glb>;
+			operating-points-v2 = <&cpu_opp_table>;
+			power-domains = <&cpr>;
+			power-domain-names = "cpr";
 		};
 
 		L2_0: l2-cache {
@@ -94,6 +110,41 @@
 		};
 	};
 
+	cpu_opp_table: cpu-opp-table {
+		compatible = "operating-points-v2-kryo-cpu";
+		opp-shared;
+
+		opp-1094400000 {
+			opp-hz = /bits/ 64 <1094400000>;
+			required-opps = <&cpr_opp1>;
+		};
+		opp-1248000000 {
+			opp-hz = /bits/ 64 <1248000000>;
+			required-opps = <&cpr_opp2>;
+		};
+		opp-1401600000 {
+			opp-hz = /bits/ 64 <1401600000>;
+			required-opps = <&cpr_opp3>;
+		};
+	};
+
+	cpr_opp_table: cpr-opp-table {
+		compatible = "operating-points-v2-qcom-level";
+
+		cpr_opp1: opp1 {
+			opp-level = <1>;
+			qcom,opp-fuse-level = <1>;
+		};
+		cpr_opp2: opp2 {
+			opp-level = <2>;
+			qcom,opp-fuse-level = <2>;
+		};
+		cpr_opp3: opp3 {
+			opp-level = <3>;
+			qcom,opp-fuse-level = <3>;
+		};
+	};
+
 	firmware {
 		scm: scm {
 			compatible = "qcom,scm-qcs404", "qcom,scm";
@@ -280,6 +331,62 @@
 			tsens_caldata: caldata@d0 {
 				reg = <0x1f8 0x14>;
 			};
+			cpr_efuse_speedbin: speedbin@13c {
+				reg = <0x13c 0x4>;
+				bits = <2 3>;
+			};
+			cpr_efuse_quot_offset1: qoffset1@231 {
+				reg = <0x231 0x4>;
+				bits = <4 7>;
+			};
+			cpr_efuse_quot_offset2: qoffset2@232 {
+				reg = <0x232 0x4>;
+				bits = <3 7>;
+			};
+			cpr_efuse_quot_offset3: qoffset3@233 {
+				reg = <0x233 0x4>;
+				bits = <2 7>;
+			};
+			cpr_efuse_init_voltage1: ivoltage1@229 {
+				reg = <0x229 0x4>;
+				bits = <4 6>;
+			};
+			cpr_efuse_init_voltage2: ivoltage2@22a {
+				reg = <0x22a 0x4>;
+				bits = <2 6>;
+			};
+			cpr_efuse_init_voltage3: ivoltage3@22b {
+				reg = <0x22b 0x4>;
+				bits = <0 6>;
+			};
+			cpr_efuse_quot1: quot1@22b {
+				reg = <0x22b 0x4>;
+				bits = <6 12>;
+			};
+			cpr_efuse_quot2: quot2@22d {
+				reg = <0x22d 0x4>;
+				bits = <2 12>;
+			};
+			cpr_efuse_quot3: quot3@230 {
+				reg = <0x230 0x4>;
+				bits = <0 12>;
+			};
+			cpr_efuse_ring1: ring1@228 {
+				reg = <0x228 0x4>;
+				bits = <0 3>;
+			};
+			cpr_efuse_ring2: ring2@228 {
+				reg = <0x228 0x4>;
+				bits = <4 3>;
+			};
+			cpr_efuse_ring3: ring3@229 {
+				reg = <0x229 0x4>;
+				bits = <0 3>;
+			};
+			cpr_efuse_revision: revision@218 {
+				reg = <0x218 0x4>;
+				bits = <3 3>;
+			};
 		};
 
 		rng: rng@e3000 {
@@ -902,14 +1009,65 @@
 			compatible = "qcom,qcs404-apcs-apps-global", "syscon";
 			reg = <0x0b011000 0x1000>;
 			#mbox-cells = <1>;
+			clocks = <&apcs_hfpll>, <&gcc GCC_GPLL0_AO_OUT_MAIN>;
+			clock-names = "pll", "aux";
+			#clock-cells = <0>;
+		};
+
+		apcs_hfpll: clock-controller@b016000 {
+			compatible = "qcom,hfpll";
+			reg = <0x0b016000 0x30>;
+			#clock-cells = <0>;
+			clock-output-names = "apcs_hfpll";
+			clocks = <&xo_board>;
+			clock-names = "xo";
 		};
 
 		watchdog@b017000 {
-			compatible = "qcom,kpss-wdt";
+			compatible = "qcom,apss-wdt-qcs404", "qcom,kpss-wdt";
 			reg = <0x0b017000 0x1000>;
 			clocks = <&sleep_clk>;
 		};
 
+		cpr: power-controller@b018000 {
+			compatible = "qcom,qcs404-cpr", "qcom,cpr";
+			reg = <0x0b018000 0x1000>;
+			interrupts = <0 15 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&xo_board>;
+			clock-names = "ref";
+			vdd-apc-supply = <&pms405_s3>;
+			#power-domain-cells = <0>;
+			operating-points-v2 = <&cpr_opp_table>;
+			acc-syscon = <&tcsr>;
+
+			nvmem-cells = <&cpr_efuse_quot_offset1>,
+				<&cpr_efuse_quot_offset2>,
+				<&cpr_efuse_quot_offset3>,
+				<&cpr_efuse_init_voltage1>,
+				<&cpr_efuse_init_voltage2>,
+				<&cpr_efuse_init_voltage3>,
+				<&cpr_efuse_quot1>,
+				<&cpr_efuse_quot2>,
+				<&cpr_efuse_quot3>,
+				<&cpr_efuse_ring1>,
+				<&cpr_efuse_ring2>,
+				<&cpr_efuse_ring3>,
+				<&cpr_efuse_revision>;
+			nvmem-cell-names = "cpr_quotient_offset1",
+				"cpr_quotient_offset2",
+				"cpr_quotient_offset3",
+				"cpr_init_voltage1",
+				"cpr_init_voltage2",
+				"cpr_init_voltage3",
+				"cpr_quotient1",
+				"cpr_quotient2",
+				"cpr_quotient3",
+				"cpr_ring_osc1",
+				"cpr_ring_osc2",
+				"cpr_ring_osc3",
+				"cpr_fuse_revision";
+		};
+
 		timer@b120000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
new file mode 100644
index 000000000000..388f50ad4fde
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
@@ -0,0 +1,430 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * SC7180 IDP board device tree source
+ *
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sc7180.dtsi"
+#include "pm6150.dtsi"
+#include "pm6150l.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. SC7180 IDP";
+	compatible = "qcom,sc7180-idp", "qcom,sc7180";
+
+	aliases {
+		hsuart0 = &uart3;
+		serial0 = &uart8;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&apps_rsc {
+	pm6150-rpmh-regulators {
+		compatible = "qcom,pm6150-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vreg_s1a_1p1: smps1 {
+			regulator-min-microvolt = <1128000>;
+			regulator-max-microvolt = <1128000>;
+		};
+
+		vreg_s4a_1p0: smps4 {
+			regulator-min-microvolt = <824000>;
+			regulator-max-microvolt = <1120000>;
+		};
+
+		vreg_s5a_2p0: smps5 {
+			regulator-min-microvolt = <1744000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vreg_l1a_1p2: ldo1 {
+			regulator-min-microvolt = <1178000>;
+			regulator-max-microvolt = <1256000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l2a_1p0: ldo2 {
+			regulator-min-microvolt = <944000>;
+			regulator-max-microvolt = <1056000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l3a_1p0: ldo3 {
+			regulator-min-microvolt = <968000>;
+			regulator-max-microvolt = <1064000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l4a_0p8: ldo4 {
+			regulator-min-microvolt = <824000>;
+			regulator-max-microvolt = <928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l5a_2p7: ldo5 {
+			regulator-min-microvolt = <2496000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l6a_0p6: ldo6 {
+			regulator-min-microvolt = <568000>;
+			regulator-max-microvolt = <648000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l9a_0p6: ldo9 {
+			regulator-min-microvolt = <488000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l10a_1p8: ldo10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1832000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l11a_1p8: ldo11 {
+			regulator-min-microvolt = <1696000>;
+			regulator-max-microvolt = <1904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l12a_1p8: ldo12 {
+			regulator-min-microvolt = <1696000>;
+			regulator-max-microvolt = <1952000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l13a_1p8: ldo13 {
+			regulator-min-microvolt = <1696000>;
+			regulator-max-microvolt = <1904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l14a_1p8: ldo14 {
+			regulator-min-microvolt = <1728000>;
+			regulator-max-microvolt = <1832000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l15a_1p8: ldo15 {
+			regulator-min-microvolt = <1696000>;
+			regulator-max-microvolt = <1904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l16a_2p7: ldo16 {
+			regulator-min-microvolt = <2496000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l17a_3p0: ldo17 {
+			regulator-min-microvolt = <2920000>;
+			regulator-max-microvolt = <3232000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l18a_2p8: ldo18 {
+			regulator-min-microvolt = <2496000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l19a_2p9: ldo19 {
+			regulator-min-microvolt = <2696000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+	};
+
+	pm6150l-rpmh-regulators {
+		compatible = "qcom,pm6150l-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vreg_s8c_1p3: smps8 {
+			regulator-min-microvolt = <1120000>;
+			regulator-max-microvolt = <1408000>;
+		};
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-min-microvolt = <1616000>;
+			regulator-max-microvolt = <1984000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l2c_1p3: ldo2 {
+			regulator-min-microvolt = <1168000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l3c_1p2: ldo3 {
+			regulator-min-microvolt = <1144000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l4c_1p8: ldo4 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l5c_1p8: ldo5 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l6c_2p9: ldo6 {
+			regulator-min-microvolt = <2696000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l7c_3p0: ldo7 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l8c_1p8: ldo8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l9c_2p9: ldo9 {
+			regulator-min-microvolt = <2952000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l10c_3p3: ldo10 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3400000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l11c_3p3: ldo11 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3400000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_bob: bob {
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+	};
+};
+
+&qspi {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&qspi_clk &qspi_cs0 &qspi_data01>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <25000000>;
+		spi-tx-bus-width = <2>;
+		spi-rx-bus-width = <2>;
+	};
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart8 {
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_hsphy {
+	status = "okay";
+	vdd-supply = <&vreg_l4a_0p8>;
+	vdda-pll-supply = <&vreg_l11a_1p8>;
+	vdda-phy-dpdm-supply = <&vreg_l17a_3p0>;
+	qcom,imp-res-offset-value = <8>;
+	qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
+	qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
+	qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+	vdda-phy-supply = <&vreg_l3c_1p2>;
+	vdda-pll-supply = <&vreg_l4a_0p8>;
+};
+
+/* PINCTRL - additions to nodes defined in sc7180.dtsi */
+
+&qspi_clk {
+	pinconf {
+		pins = "gpio63";
+		bias-disable;
+	};
+};
+
+&qspi_cs0 {
+	pinconf {
+		pins = "gpio68";
+		bias-disable;
+	};
+};
+
+&qspi_data01 {
+	pinconf {
+		pins = "gpio64", "gpio65";
+
+		/* High-Z when no transfers; nice to park the lines */
+		bias-pull-up;
+	};
+};
+
+&qup_i2c2_default {
+	pinconf {
+		pins = "gpio15", "gpio16";
+		drive-strength = <2>;
+
+		/* Has external pullup */
+		bias-disable;
+	};
+};
+
+&qup_i2c4_default {
+	pinconf {
+		pins = "gpio115", "gpio116";
+		drive-strength = <2>;
+
+		/* Has external pullup */
+		bias-disable;
+	};
+};
+
+&qup_i2c7_default {
+	pinconf {
+		pins = "gpio6", "gpio7";
+		drive-strength = <2>;
+
+		/* Has external pullup */
+		bias-disable;
+	};
+};
+
+&qup_i2c9_default {
+	pinconf {
+		pins = "gpio46", "gpio47";
+		drive-strength = <2>;
+
+		/* Has external pullup */
+		bias-disable;
+	};
+};
+
+&qup_uart3_default {
+	pinconf-cts {
+		/*
+		 * Configure a pull-down on 38 (CTS) to match the pull of
+		 * the Bluetooth module.
+		 */
+		pins = "gpio38";
+		bias-pull-down;
+		output-high;
+	};
+
+	pinconf-rts {
+		/* We'll drive 39 (RTS), so no pull */
+		pins = "gpio39";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	pinconf-tx {
+		/* We'll drive 40 (TX), so no pull */
+		pins = "gpio40";
+		drive-strength = <2>;
+		bias-disable;
+		output-high;
+	};
+
+	pinconf-rx {
+		/*
+		 * Configure a pull-up on 41 (RX). This is needed to avoid
+		 * garbage data when the TX pin of the Bluetooth module is
+		 * in tri-state (module powered off or not driving the
+		 * signal yet).
+		 */
+		pins = "gpio41";
+		bias-pull-up;
+	};
+};
+
+&qup_uart8_default {
+	pinconf-tx {
+		pins = "gpio44";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	pinconf-rx {
+		pins = "gpio45";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
+
+&qup_spi0_default {
+	pinconf {
+		pins = "gpio34", "gpio35", "gpio36", "gpio37";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&qup_spi6_default {
+	pinconf {
+		pins = "gpio59", "gpio60", "gpio61", "gpio62";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&qup_spi10_default {
+	pinconf {
+		pins = "gpio86", "gpio87", "gpio88", "gpio89";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
new file mode 100644
index 000000000000..8011c5fe2a31
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -0,0 +1,2187 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * SC7180 SoC device tree source
+ *
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ */
+
+#include <dt-bindings/clock/qcom,gcc-sc7180.h>
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/phy/phy-qcom-qusb2.h>
+#include <dt-bindings/power/qcom-aoss-qmp.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/reset/qcom,sdm845-aoss.h>
+#include <dt-bindings/reset/qcom,sdm845-pdc.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &i2c7;
+		i2c8 = &i2c8;
+		i2c9 = &i2c9;
+		i2c10 = &i2c10;
+		i2c11 = &i2c11;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		spi3 = &spi3;
+		spi5 = &spi5;
+		spi6 = &spi6;
+		spi8 = &spi8;
+		spi10 = &spi10;
+		spi11 = &spi11;
+	};
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			clock-frequency = <38400000>;
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32764>;
+			#clock-cells = <0>;
+		};
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		aop_cmd_db_mem: memory@80820000 {
+			reg = <0x0 0x80820000 0x0 0x20000>;
+			compatible = "qcom,cmd-db";
+		};
+
+		smem_mem: memory@80900000 {
+			reg = <0x0 0x80900000 0x0 0x200000>;
+			no-map;
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			#cooling-cells = <2>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			L2_0: l2-cache {
+				compatible = "cache";
+				next-level-cache = <&L3_0>;
+				L3_0: l3-cache {
+					compatible = "cache";
+				};
+			};
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			next-level-cache = <&L2_100>;
+			#cooling-cells = <2>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			L2_100: l2-cache {
+				compatible = "cache";
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+			next-level-cache = <&L2_200>;
+			#cooling-cells = <2>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			L2_200: l2-cache {
+				compatible = "cache";
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+			next-level-cache = <&L2_300>;
+			#cooling-cells = <2>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			L2_300: l2-cache {
+				compatible = "cache";
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU4: cpu@400 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x400>;
+			enable-method = "psci";
+			next-level-cache = <&L2_400>;
+			#cooling-cells = <2>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			L2_400: l2-cache {
+				compatible = "cache";
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU5: cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x500>;
+			enable-method = "psci";
+			next-level-cache = <&L2_500>;
+			#cooling-cells = <2>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			L2_500: l2-cache {
+				compatible = "cache";
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU6: cpu@600 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x600>;
+			enable-method = "psci";
+			next-level-cache = <&L2_600>;
+			#cooling-cells = <2>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			L2_600: l2-cache {
+				compatible = "cache";
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU7: cpu@700 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x700>;
+			enable-method = "psci";
+			next-level-cache = <&L2_700>;
+			#cooling-cells = <2>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			L2_700: l2-cache {
+				compatible = "cache";
+				next-level-cache = <&L3_0>;
+			};
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0 0x80000000 0 0>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm-sc7180", "qcom,scm";
+		};
+	};
+
+	tcsr_mutex: hwlock {
+		compatible = "qcom,tcsr-mutex";
+		syscon = <&tcsr_mutex_regs 0 0x1000>;
+		#hwlock-cells = <1>;
+	};
+
+	smem {
+		compatible = "qcom,smem";
+		memory-region = <&smem_mem>;
+		hwlocks = <&tcsr_mutex 3>;
+	};
+
+	smp2p-cdsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <94>, <432>;
+
+		interrupts = <GIC_SPI 576 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apss_shared 6>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <5>;
+
+		cdsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		cdsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-lpass {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+
+		interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apss_shared 10>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		adsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		adsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-mpss {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+		interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&apss_shared 14>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		modem_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	soc: soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0 0 0 0 0x10 0>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+		compatible = "simple-bus";
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,gcc-sc7180";
+			reg = <0 0x00100000 0 0x1f0000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK_A>;
+			clock-names = "bi_tcxo", "bi_tcxo_ao";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		qfprom@784000 {
+			compatible = "qcom,qfprom";
+			reg = <0 0x00784000 0 0x8ff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			qusb2p_hstx_trim: hstx-trim-primary@25b {
+				reg = <0x25b 0x1>;
+				bits = <1 3>;
+			};
+		};
+
+		qupv3_id_0: geniqup@8c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0 0x008c0000 0 0x6000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			i2c0: i2c@880000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00880000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c0_default>;
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi0: spi@880000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00880000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi0_default>;
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart0: serial@880000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00880000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart0_default>;
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@884000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00884000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c1_default>;
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi1: spi@884000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00884000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi1_default>;
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart1: serial@884000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00884000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart1_default>;
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@888000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00888000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c2_default>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart2: serial@888000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00888000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart2_default>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@88c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0088c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c3_default>;
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi3: spi@88c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0088c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi3_default>;
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart3: serial@88c000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x0088c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart3_default>;
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@890000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00890000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c4_default>;
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart4: serial@890000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00890000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart4_default>;
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			i2c5: i2c@894000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00894000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c5_default>;
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi5: spi@894000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00894000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi5_default>;
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart5: serial@894000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00894000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart5_default>;
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		qupv3_id_1: geniqup@ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0 0x00ac0000 0 0x6000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			i2c6: i2c@a80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a80000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c6_default>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi6: spi@a80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a80000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi6_default>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart6: serial@a80000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00a80000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart6_default>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			i2c7: i2c@a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a84000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c7_default>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart7: serial@a84000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00a84000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart7_default>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			i2c8: i2c@a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a88000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c8_default>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi8: spi@a88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a88000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi8_default>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart8: serial@a88000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0 0x00a88000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart8_default>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			i2c9: i2c@a8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a8c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c9_default>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart9: serial@a8c000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00a8c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart9_default>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			i2c10: i2c@a90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a90000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c10_default>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi10: spi@a90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a90000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi10_default>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart10: serial@a90000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00a90000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart10_default>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			i2c11: i2c@a94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a94000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c11_default>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi11: spi@a94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a94000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi11_default>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart11: serial@a94000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00a94000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart11_default>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		tcsr_mutex_regs: syscon@1f40000 {
+			compatible = "syscon";
+			reg = <0 0x01f40000 0 0x40000>;
+		};
+
+		tlmm: pinctrl@3500000 {
+			compatible = "qcom,sc7180-pinctrl";
+			reg = <0 0x03500000 0 0x300000>,
+			      <0 0x03900000 0 0x300000>,
+			      <0 0x03d00000 0 0x300000>;
+			reg-names = "west", "north", "south";
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 120>;
+			wakeup-parent = <&pdc>;
+
+			qspi_clk: qspi-clk {
+				pinmux {
+					pins = "gpio63";
+					function = "qspi_clk";
+				};
+			};
+
+			qspi_cs0: qspi-cs0 {
+				pinmux {
+					pins = "gpio68";
+					function = "qspi_cs";
+				};
+			};
+
+			qspi_cs1: qspi-cs1 {
+				pinmux {
+					pins = "gpio72";
+					function = "qspi_cs";
+				};
+			};
+
+			qspi_data01: qspi-data01 {
+				pinmux-data {
+					pins = "gpio64", "gpio65";
+					function = "qspi_data";
+				};
+			};
+
+			qspi_data12: qspi-data12 {
+				pinmux-data {
+					pins = "gpio66", "gpio67";
+					function = "qspi_data";
+				};
+			};
+
+			qup_i2c0_default: qup-i2c0-default {
+				pinmux {
+					pins = "gpio34", "gpio35";
+					function = "qup00";
+				};
+			};
+
+			qup_i2c1_default: qup-i2c1-default {
+				pinmux {
+					pins = "gpio0", "gpio1";
+					function = "qup01";
+				};
+			};
+
+			qup_i2c2_default: qup-i2c2-default {
+				pinmux {
+					pins = "gpio15", "gpio16";
+					function = "qup02_i2c";
+				};
+			};
+
+			qup_i2c3_default: qup-i2c3-default {
+				pinmux {
+					pins = "gpio38", "gpio39";
+					function = "qup03";
+				};
+			};
+
+			qup_i2c4_default: qup-i2c4-default {
+				pinmux {
+					pins = "gpio115", "gpio116";
+					function = "qup04_i2c";
+				};
+			};
+
+			qup_i2c5_default: qup-i2c5-default {
+				pinmux {
+					pins = "gpio25", "gpio26";
+					function = "qup05";
+				};
+			};
+
+			qup_i2c6_default: qup-i2c6-default {
+				pinmux {
+					pins = "gpio59", "gpio60";
+					function = "qup10";
+				};
+			};
+
+			qup_i2c7_default: qup-i2c7-default {
+				pinmux {
+					pins = "gpio6", "gpio7";
+					function = "qup11_i2c";
+				};
+			};
+
+			qup_i2c8_default: qup-i2c8-default {
+				pinmux {
+					pins = "gpio42", "gpio43";
+					function = "qup12";
+				};
+			};
+
+			qup_i2c9_default: qup-i2c9-default {
+				pinmux {
+					pins = "gpio46", "gpio47";
+					function = "qup13_i2c";
+				};
+			};
+
+			qup_i2c10_default: qup-i2c10-default {
+				pinmux {
+					pins = "gpio86", "gpio87";
+					function = "qup14";
+				};
+			};
+
+			qup_i2c11_default: qup-i2c11-default {
+				pinmux {
+					pins = "gpio53", "gpio54";
+					function = "qup15";
+				};
+			};
+
+			qup_spi0_default: qup-spi0-default {
+				pinmux {
+					pins = "gpio34", "gpio35",
+					       "gpio36", "gpio37";
+					function = "qup00";
+				};
+			};
+
+			qup_spi1_default: qup-spi1-default {
+				pinmux {
+					pins = "gpio0", "gpio1",
+					       "gpio2", "gpio3";
+					function = "qup01";
+				};
+			};
+
+			qup_spi3_default: qup-spi3-default {
+				pinmux {
+					pins = "gpio38", "gpio39",
+					       "gpio40", "gpio41";
+					function = "qup03";
+				};
+			};
+
+			qup_spi5_default: qup-spi5-default {
+				pinmux {
+					pins = "gpio25", "gpio26",
+					       "gpio27", "gpio28";
+					function = "qup05";
+				};
+			};
+
+			qup_spi6_default: qup-spi6-default {
+				pinmux {
+					pins = "gpio59", "gpio60",
+					       "gpio61", "gpio62";
+					function = "qup10";
+				};
+			};
+
+			qup_spi8_default: qup-spi8-default {
+				pinmux {
+					pins = "gpio42", "gpio43",
+					       "gpio44", "gpio45";
+					function = "qup12";
+				};
+			};
+
+			qup_spi10_default: qup-spi10-default {
+				pinmux {
+					pins = "gpio86", "gpio87",
+					       "gpio88", "gpio89";
+					function = "qup14";
+				};
+			};
+
+			qup_spi11_default: qup-spi11-default {
+				pinmux {
+					pins = "gpio53", "gpio54",
+					       "gpio55", "gpio56";
+					function = "qup15";
+				};
+			};
+
+			qup_uart0_default: qup-uart0-default {
+				pinmux {
+					pins = "gpio34", "gpio35",
+					       "gpio36", "gpio37";
+					function = "qup00";
+				};
+			};
+
+			qup_uart1_default: qup-uart1-default {
+				pinmux {
+					pins = "gpio0", "gpio1",
+					       "gpio2", "gpio3";
+					function = "qup01";
+				};
+			};
+
+			qup_uart2_default: qup-uart2-default {
+				pinmux {
+					pins = "gpio15", "gpio16";
+					function = "qup02_uart";
+				};
+			};
+
+			qup_uart3_default: qup-uart3-default {
+				pinmux {
+					pins = "gpio38", "gpio39",
+					       "gpio40", "gpio41";
+					function = "qup03";
+				};
+			};
+
+			qup_uart4_default: qup-uart4-default {
+				pinmux {
+					pins = "gpio115", "gpio116";
+					function = "qup04_uart";
+				};
+			};
+
+			qup_uart5_default: qup-uart5-default {
+				pinmux {
+					pins = "gpio25", "gpio26",
+					       "gpio27", "gpio28";
+					function = "qup05";
+				};
+			};
+
+			qup_uart6_default: qup-uart6-default {
+				pinmux {
+					pins = "gpio59", "gpio60",
+					       "gpio61", "gpio62";
+					function = "qup10";
+				};
+			};
+
+			qup_uart7_default: qup-uart7-default {
+				pinmux {
+					pins = "gpio6", "gpio7";
+					function = "qup11_uart";
+				};
+			};
+
+			qup_uart8_default: qup-uart8-default {
+				pinmux {
+					pins = "gpio44", "gpio45";
+					function = "qup12";
+				};
+			};
+
+			qup_uart9_default: qup-uart9-default {
+				pinmux {
+					pins = "gpio46", "gpio47";
+					function = "qup13_uart";
+				};
+			};
+
+			qup_uart10_default: qup-uart10-default {
+				pinmux {
+					pins = "gpio86", "gpio87",
+					       "gpio88", "gpio89";
+					function = "qup14";
+				};
+			};
+
+			qup_uart11_default: qup-uart11-default {
+				pinmux {
+					pins = "gpio53", "gpio54",
+					       "gpio55", "gpio56";
+					function = "qup15";
+				};
+			};
+		};
+
+		qspi: spi@88dc000 {
+			compatible = "qcom,qspi-v1";
+			reg = <0 0x088dc000 0 0x600>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+				 <&gcc GCC_QSPI_CORE_CLK>;
+			clock-names = "iface", "core";
+			status = "disabled";
+		};
+
+		usb_1_hsphy: phy@88e3000 {
+			compatible = "qcom,sc7180-qusb2-phy";
+			reg = <0 0x088e3000 0 0x400>;
+			status = "disabled";
+			#phy-cells = <0>;
+			clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "cfg_ahb", "ref";
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+
+			nvmem-cells = <&qusb2p_hstx_trim>;
+		};
+
+		usb_1_qmpphy: phy-wrapper@88e9000 {
+			compatible = "qcom,sc7180-qmp-usb3-phy";
+			reg = <0 0x088e9000 0 0x18c>,
+			      <0 0x088e8000 0 0x38>;
+			reg-names = "reg-base", "dp_com";
+			status = "disabled";
+			#clock-cells = <1>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref", "com_aux";
+
+			resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
+				 <&gcc GCC_USB3_PHY_PRIM_BCR>;
+			reset-names = "phy", "common";
+
+			usb_1_ssphy: phy@88e9200 {
+				reg = <0 0x088e9200 0 0x128>,
+				      <0 0x088e9400 0 0x200>,
+				      <0 0x088e9c00 0 0x218>,
+				      <0 0x088e9600 0 0x128>,
+				      <0 0x088e9800 0 0x200>,
+				      <0 0x088e9a00 0 0x18>;
+				#clock-cells = <0>;
+				#phy-cells = <0>;
+				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+				clock-names = "pipe0";
+				clock-output-names = "usb3_phy_pipe_clk_src";
+			};
+		};
+
+		system-cache-controller@9200000 {
+			compatible = "qcom,sc7180-llcc";
+			reg = <0 0x09200000 0 0x200000>, <0 0x09600000 0 0x50000>;
+			reg-names = "llcc_base", "llcc_broadcast_base";
+			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		usb_1: usb@a6f8800 {
+			compatible = "qcom,sc7180-dwc3", "qcom,dwc3";
+			reg = <0 0x0a6f8800 0 0x400>;
+			status = "disabled";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			dma-ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>;
+			clock-names = "cfg_noc", "core", "iface", "mock_utmi",
+				      "sleep";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <150000000>;
+
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hs_phy_irq", "ss_phy_irq",
+					  "dm_hs_phy_irq", "dp_hs_phy_irq";
+
+			power-domains = <&gcc USB30_PRIM_GDSC>;
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+			usb_1_dwc3: dwc3@a600000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x0a600000 0 0xe000>;
+				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x540 0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+			};
+		};
+
+		pdc: interrupt-controller@b220000 {
+			compatible = "qcom,sc7180-pdc", "qcom,pdc";
+			reg = <0 0x0b220000 0 0x30000>;
+			qcom,pdc-ranges = <0 480 15>, <17 497 98>,
+					  <119 634 4>, <124 639 1>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupt-controller;
+		};
+
+		pdc_reset: reset-controller@b2e0000 {
+			compatible = "qcom,sc7180-pdc-global", "qcom,sdm845-pdc-global";
+			reg = <0 0x0b2e0000 0 0x20000>;
+			#reset-cells = <1>;
+		};
+
+		tsens0: thermal-sensor@c263000 {
+			compatible = "qcom,sc7180-tsens","qcom,tsens-v2";
+			reg = <0 0x0c263000 0 0x1ff>, /* TM */
+				<0 0x0c222000 0 0x1ff>; /* SROT */
+			#qcom,sensors = <15>;
+			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow","critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens1: thermal-sensor@c265000 {
+			compatible = "qcom,sc7180-tsens","qcom,tsens-v2";
+			reg = <0 0x0c265000 0 0x1ff>, /* TM */
+				<0 0x0c223000 0 0x1ff>; /* SROT */
+			#qcom,sensors = <10>;
+			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow","critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		aoss_reset: reset-controller@c2a0000 {
+			compatible = "qcom,sc7180-aoss-cc", "qcom,sdm845-aoss-cc";
+			reg = <0 0x0c2a0000 0 0x31000>;
+			#reset-cells = <1>;
+		};
+
+		aoss_qmp: qmp@c300000 {
+			compatible = "qcom,sc7180-aoss-qmp";
+			reg = <0 0x0c300000 0 0x100000>;
+			interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>;
+			mboxes = <&apss_shared 0>;
+
+			#clock-cells = <0>;
+			#power-domain-cells = <1>;
+		};
+
+		spmi_bus: spmi@c440000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0 0x0c440000 0 0x1100>,
+			      <0 0x0c600000 0 0x2000000>,
+			      <0 0x0e600000 0 0x100000>,
+			      <0 0x0e700000 0 0xa0000>,
+			      <0 0x0c40a000 0 0x26000>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+			cell-index = <0>;
+		};
+
+		apps_smmu: iommu@15000000 {
+			compatible = "qcom,sc7180-smmu-500", "arm,mmu-500";
+			reg = <0 0x15000000 0 0x100000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		intc: interrupt-controller@17a00000 {
+			compatible = "arm,gic-v3";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0 0x17a00000 0 0x10000>,     /* GICD */
+			      <0 0x17a60000 0 0x100000>;    /* GICR * 8 */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+			msi-controller@17a40000 {
+				compatible = "arm,gic-v3-its";
+				msi-controller;
+				#msi-cells = <1>;
+				reg = <0 0x17a40000 0 0x20000>;
+				status = "disabled";
+			};
+		};
+
+		apss_shared: mailbox@17c00000 {
+			compatible = "qcom,sc7180-apss-shared";
+			reg = <0 0x17c00000 0 0x10000>;
+			#mbox-cells = <1>;
+		};
+
+		watchdog@17c10000 {
+			compatible = "qcom,apss-wdt-sc7180", "qcom,kpss-wdt";
+			reg = <0 0x17c10000 0 0x1000>;
+			clocks = <&sleep_clk>;
+		};
+
+		timer@17c20000{
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			compatible = "arm,armv7-timer-mem";
+			reg = <0 0x17c20000 0 0x1000>;
+
+			frame@17c21000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0 0x17c21000 0 0x1000>,
+				      <0 0x17c22000 0 0x1000>;
+			};
+
+			frame@17c23000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0 0x17c23000 0 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c25000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0 0x17c25000 0 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c27000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0 0x17c27000 0 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c29000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0 0x17c29000 0 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c2b000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0 0x17c2b000 0 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c2d000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0 0x17c2d000 0 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		apps_rsc: rsc@18200000 {
+			compatible = "qcom,rpmh-rsc";
+			reg = <0 0x18200000 0 0x10000>,
+			      <0 0x18210000 0 0x10000>,
+			      <0 0x18220000 0 0x10000>;
+			reg-names = "drv-0", "drv-1", "drv-2";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS  2>,
+					  <SLEEP_TCS   3>,
+					  <WAKE_TCS    3>,
+					  <CONTROL_TCS 1>;
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,sc7180-rpmh-clk";
+				clocks = <&xo_board>;
+				clock-names = "xo";
+				#clock-cells = <1>;
+			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,sc7180-rpmhpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp1 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp2 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs: opp3 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_svs: opp4 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l1: opp5 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_svs_l2: opp6 {
+						opp-level = <224>;
+					};
+
+					rpmhpd_opp_nom: opp7 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp8 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp9 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp10 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp11 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
+		};
+
+		cpufreq_hw: cpufreq@18323000 {
+			compatible = "qcom,cpufreq-hw";
+			reg = <0 0x18323000 0 0x1400>, <0 0x18325800 0 0x1400>;
+			reg-names = "freq-domain0", "freq-domain1";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#freq-domain-cells = <1>;
+		};
+	};
+
+	thermal-zones {
+		cpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 1>;
+
+			trips {
+				cpu0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu0_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu0_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 2>;
+
+			trips {
+				cpu1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu1_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu1_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 3>;
+
+			trips {
+				cpu2_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu2_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu2_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 4>;
+
+			trips {
+				cpu3_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu3_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu3_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu4-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 5>;
+
+			trips {
+				cpu4_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu4_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu4_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu5-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 6>;
+
+			trips {
+				cpu5_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu5_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu5_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu6-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 9>;
+
+			trips {
+				cpu6_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu6_alert0>;
+					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu6_alert1>;
+					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu7-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 10>;
+
+			trips {
+				cpu7_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu7_alert0>;
+					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu7_alert1>;
+					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu8-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 11>;
+
+			trips {
+				cpu8_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu8_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu8_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu8_alert0>;
+					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu8_alert1>;
+					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu9-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 12>;
+
+			trips {
+				cpu9_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu9_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu9_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu9_alert0>;
+					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu9_alert1>;
+					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		aoss0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 0>;
+
+			trips {
+				aoss0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		cpuss0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 7>;
+
+			trips {
+				cpuss0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cpuss0_crit: cluster0_crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 8>;
+
+			trips {
+				cpuss1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cpuss1_crit: cluster0_crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 13>;
+
+			trips {
+				gpuss0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		gpuss1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 14>;
+
+			trips {
+				gpuss1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		aoss1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 0>;
+
+			trips {
+				aoss1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		cwlan-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 1>;
+
+			trips {
+				cwlan_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		audio-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 2>;
+
+			trips {
+				audio_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		ddr-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 3>;
+
+			trips {
+				ddr_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		q6-hvx-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 4>;
+
+			trips {
+				q6_hvx_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		camera-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 5>;
+
+			trips {
+				camera_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		mdm-core-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 6>;
+
+			trips {
+				mdm_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		mdm-dsp-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 7>;
+
+			trips {
+				mdm_dsp_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		npu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 8>;
+
+			trips {
+				npu_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		video-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 9>;
+
+			trips {
+				video_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
index 9a4ff57fc877..7b53b3c7ffe6 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
@@ -165,7 +165,6 @@
 /delete-node/ &venus_mem;
 /delete-node/ &cdsp_mem;
 /delete-node/ &cdsp_pas;
-/delete-node/ &zap_shader;
 /delete-node/ &gpu_mem;
 
 /* Increase the size from 120 MB to 128 MB */
@@ -651,6 +650,20 @@ ap_ts_i2c: &i2c14 {
 	status = "okay";
 };
 
+&spi5 {
+	status = "okay";
+
+	tpm@0 {
+		compatible = "google,cr50";
+		reg = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&h1_ap_int_odl>;
+		spi-max-frequency = <800000>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <129 IRQ_TYPE_EDGE_RISING>;
+	};
+};
+
 &spi10 {
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index d100f46791a6..eb77aaa6a819 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -197,7 +197,7 @@
 &adsp_pas {
 	status = "okay";
 
-	firmware-name = "qcom/db845c/adsp.mdt";
+	firmware-name = "qcom/sdm845/adsp.mdt";
 };
 
 &apps_rsc {
@@ -343,7 +343,7 @@
 
 &cdsp_pas {
 	status = "okay";
-	firmware-name = "qcom/db845c/cdsp.mdt";
+	firmware-name = "qcom/sdm845/cdsp.mdt";
 };
 
 &gcc {
@@ -352,6 +352,18 @@
 			   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>;
 };
 
+&gpu {
+	zap-shader {
+		memory-region = <&gpu_mem>;
+		firmware-name = "qcom/sdm845/a630_zap.mbn";
+	};
+};
+
+&mss_pil {
+	status = "okay";
+	firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mbn";
+};
+
 &pm8998_gpio {
 	vol_up_pin_a: vol-up-active {
 		pins = "gpio6";
@@ -529,6 +541,8 @@
 	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
 	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
 	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+
+	qcom,snoc-host-cap-8bit-quirk;
 };
 
 /* PINCTRL - additions to nodes defined in sdm845.dtsi */
diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
index c57548b7b250..09ad37b0dd71 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
@@ -360,6 +360,13 @@
 			   <GCC_LPASS_SWAY_CLK>;
 };
 
+&gpu {
+	zap-shader {
+		memory-region = <&gpu_mem>;
+		firmware-name = "qcom/sdm845/a630_zap.mbn";
+	};
+};
+
 &i2c10 {
 	status = "okay";
 	clock-frequency = <400000>;
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index ddb1f23c936f..d42302b8889b 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -1357,7 +1357,7 @@
 			};
 		};
 
-		cache-controller@1100000 {
+		system-cache-controller@1100000 {
 			compatible = "qcom,sdm845-llcc";
 			reg = <0 0x01100000 0 0x200000>, <0 0x01300000 0 0x50000>;
 			reg-names = "llcc_base", "llcc_broadcast_base";
@@ -1374,6 +1374,8 @@
 			lanes-per-direction = <2>;
 			power-domains = <&gcc UFS_PHY_GDSC>;
 			#reset-cells = <1>;
+			resets = <&gcc GCC_UFS_PHY_BCR>;
+			reset-names = "rst";
 
 			iommus = <&apps_smmu 0x100 0xf>;
 
@@ -1447,6 +1449,7 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			gpio-ranges = <&tlmm 0 0 150>;
+			wakeup-parent = <&pdc_intc>;
 
 			qspi_clk: qspi-clk {
 				pinmux {
@@ -2804,7 +2807,7 @@
 			};
 		};
 
-		gpu@5000000 {
+		gpu: gpu@5000000 {
 			compatible = "qcom,adreno-630.2", "qcom,adreno";
 			#stream-id-cells = <16>;
 
@@ -2824,10 +2827,6 @@
 
 			qcom,gmu = <&gmu>;
 
-			zap_shader: zap-shader {
-				memory-region = <&gpu_mem>;
-			};
-
 			gpu_opp_table: opp-table {
 				compatible = "operating-points-v2";
 
@@ -2939,6 +2938,15 @@
 			#power-domain-cells = <1>;
 		};
 
+		pdc_intc: interrupt-controller@b220000 {
+			compatible = "qcom,sdm845-pdc", "qcom,pdc";
+			reg = <0 0x0b220000 0 0x30000>;
+			qcom,pdc-ranges = <0 480 94>, <94 609 15>, <115 630 7>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupt-controller;
+		};
+
 		pdc_reset: reset-controller@b2e0000 {
 			compatible = "qcom,sdm845-pdc-global";
 			reg = <0 0x0b2e0000 0 0x20000>;
@@ -2950,8 +2958,9 @@
 			reg = <0 0x0c263000 0 0x1ff>, /* TM */
 			      <0 0x0c222000 0 0x1ff>; /* SROT */
 			#qcom,sensors = <13>;
-			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "uplow";
+			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
 			#thermal-sensor-cells = <1>;
 		};
 
@@ -2960,8 +2969,9 @@
 			reg = <0 0x0c265000 0 0x1ff>, /* TM */
 			      <0 0x0c223000 0 0x1ff>; /* SROT */
 			#qcom,sensors = <8>;
-			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "uplow";
+			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
 			#thermal-sensor-cells = <1>;
 		};
 
@@ -3191,7 +3201,7 @@
 			      <0 0x17a60000 0 0x100000>;    /* GICR * 8 */
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 
-			gic-its@17a40000 {
+			msi-controller@17a40000 {
 				compatible = "arm,gic-v3-its";
 				msi-controller;
 				#msi-cells = <1>;
diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
index 13dc619687f3..b255be3a4a0a 100644
--- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
+++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
@@ -245,6 +245,13 @@
 			   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>;
 };
 
+&gpu {
+	zap-shader {
+		memory-region = <&gpu_mem>;
+		firmware-name = "qcom/LENOVO/81JL/qcdxkmsuc850.mbn";
+	};
+};
+
 &i2c1 {
 	status = "okay";
 	clock-frequency = <400000>;
diff --git a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts
index aa5de42fcae4..8ab16611ebe8 100644
--- a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts
@@ -7,6 +7,7 @@
 /dts-v1/;
 
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/gpio/gpio.h>
 #include "sm8150.dtsi"
 #include "pm8150.dtsi"
 #include "pm8150b.dtsi"
@@ -366,6 +367,18 @@
 	};
 };
 
+&remoteproc_adsp {
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	status = "okay";
+};
+
+&remoteproc_slpi {
+	status = "okay";
+};
+
 &tlmm {
 	gpio-reserved-ranges = <0 4>, <126 4>;
 };
@@ -373,3 +386,25 @@
 &uart2 {
 	status = "okay";
 };
+
+&ufs_mem_hc {
+	status = "okay";
+
+	reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l10a_2p5>;
+	vcc-max-microamp = <750000>;
+	vccq-supply = <&vreg_l9a_1p2>;
+	vccq-max-microamp = <700000>;
+	vccq2-supply = <&vreg_s4a_1p8>;
+	vccq2-max-microamp = <750000>;
+};
+
+&ufs_mem_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vdda_ufs_2ln_core_1>;
+	vdda-max-microamp = <90200>;
+	vdda-pll-supply = <&vreg_l3c_1p2>;
+	vdda-pll-max-microamp = <19000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 8f23fcadecb8..141c21dfa68c 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -5,8 +5,11 @@
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/qcom-aoss-qmp.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,gcc-sm8150.h>
 
 / {
 	interrupt-parent = <&intc>;
@@ -42,6 +45,7 @@
 			reg = <0x0 0x0>;
 			enable-method = "psci";
 			next-level-cache = <&L2_0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
 			L2_0: l2-cache {
 				compatible = "cache";
 				next-level-cache = <&L3_0>;
@@ -57,6 +61,7 @@
 			reg = <0x0 0x100>;
 			enable-method = "psci";
 			next-level-cache = <&L2_100>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
 			L2_100: l2-cache {
 				compatible = "cache";
 				next-level-cache = <&L3_0>;
@@ -70,6 +75,7 @@
 			reg = <0x0 0x200>;
 			enable-method = "psci";
 			next-level-cache = <&L2_200>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
 			L2_200: l2-cache {
 				compatible = "cache";
 				next-level-cache = <&L3_0>;
@@ -82,6 +88,7 @@
 			reg = <0x0 0x300>;
 			enable-method = "psci";
 			next-level-cache = <&L2_300>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
 			L2_300: l2-cache {
 				compatible = "cache";
 				next-level-cache = <&L3_0>;
@@ -94,6 +101,7 @@
 			reg = <0x0 0x400>;
 			enable-method = "psci";
 			next-level-cache = <&L2_400>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
 			L2_400: l2-cache {
 				compatible = "cache";
 				next-level-cache = <&L3_0>;
@@ -106,6 +114,7 @@
 			reg = <0x0 0x500>;
 			enable-method = "psci";
 			next-level-cache = <&L2_500>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
 			L2_500: l2-cache {
 				compatible = "cache";
 				next-level-cache = <&L3_0>;
@@ -118,6 +127,7 @@
 			reg = <0x0 0x600>;
 			enable-method = "psci";
 			next-level-cache = <&L2_600>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
 			L2_600: l2-cache {
 				compatible = "cache";
 				next-level-cache = <&L3_0>;
@@ -130,6 +140,7 @@
 			reg = <0x0 0x700>;
 			enable-method = "psci";
 			next-level-cache = <&L2_700>;
+			qcom,freq-domain = <&cpufreq_hw 2>;
 			L2_700: l2-cache {
 				compatible = "cache";
 				next-level-cache = <&L3_0>;
@@ -283,6 +294,102 @@
 		hwlocks = <&tcsr_mutex 3>;
 	};
 
+	smp2p-cdsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <94>, <432>;
+
+		interrupts = <GIC_SPI 576 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apss_shared 6>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <5>;
+
+		cdsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		cdsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-lpass {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+
+		interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apss_shared 10>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		adsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		adsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-mpss {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+
+		interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apss_shared 14>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		modem_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-slpi {
+		compatible = "qcom,smp2p";
+		qcom,smem = <481>, <430>;
+
+		interrupts = <GIC_SPI 172 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apss_shared 26>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <3>;
+
+		slpi_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		slpi_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
 	soc: soc@0 {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -306,8 +413,8 @@
 			compatible = "qcom,geni-se-qup";
 			reg = <0x0 0x00ac0000 0x0 0x6000>;
 			clock-names = "m-ahb", "s-ahb";
-			clocks = <&gcc 123>,
-				 <&gcc 124>;
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
 			#address-cells = <2>;
 			#size-cells = <2>;
 			ranges;
@@ -317,17 +424,120 @@
 				compatible = "qcom,geni-debug-uart";
 				reg = <0x0 0x00a90000 0x0 0x4000>;
 				clock-names = "se";
-				clocks = <&gcc 105>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
 				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 		};
 
+		ufs_mem_hc: ufshc@1d84000 {
+			compatible = "qcom,sm8150-ufshc", "qcom,ufshc",
+				     "jedec,ufs-2.0";
+			reg = <0 0x01d84000 0 0x2500>;
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&ufs_mem_phy_lanes>;
+			phy-names = "ufsphy";
+			lanes-per-direction = <2>;
+			#reset-cells = <1>;
+			resets = <&gcc GCC_UFS_PHY_BCR>;
+			reset-names = "rst";
+
+			clock-names =
+				"core_clk",
+				"bus_aggr_clk",
+				"iface_clk",
+				"core_clk_unipro",
+				"ref_clk",
+				"tx_lane0_sync_clk",
+				"rx_lane0_sync_clk",
+				"rx_lane1_sync_clk";
+			clocks =
+				<&gcc GCC_UFS_PHY_AXI_CLK>,
+				<&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				<&gcc GCC_UFS_PHY_AHB_CLK>,
+				<&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+				<&rpmhcc RPMH_CXO_CLK>,
+				<&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+				<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+				<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+			freq-table-hz =
+				<37500000 300000000>,
+				<0 0>,
+				<0 0>,
+				<37500000 300000000>,
+				<0 0>,
+				<0 0>,
+				<0 0>,
+				<0 0>;
+
+			status = "disabled";
+		};
+
+		ufs_mem_phy: phy@1d87000 {
+			compatible = "qcom,sm8150-qmp-ufs-phy";
+			reg = <0 0x01d87000 0 0x1c0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			clock-names = "ref",
+				      "ref_aux";
+			clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+
+			resets = <&ufs_mem_hc 0>;
+			reset-names = "ufsphy";
+			status = "disabled";
+
+			ufs_mem_phy_lanes: lanes@1d87400 {
+				reg = <0 0x01d87400 0 0x108>,
+				      <0 0x01d87600 0 0x1e0>,
+				      <0 0x01d87c00 0 0x1dc>,
+				      <0 0x01d87800 0 0x108>,
+				      <0 0x01d87a00 0 0x1e0>;
+				#phy-cells = <0>;
+			};
+		};
+
 		tcsr_mutex_regs: syscon@1f40000 {
 			compatible = "syscon";
 			reg = <0x0 0x01f40000 0x0 0x40000>;
 		};
 
+		remoteproc_slpi: remoteproc@2400000 {
+			compatible = "qcom,sm8150-slpi-pas";
+			reg = <0x0 0x02400000 0x0 0x4040>;
+
+			interrupts-extended = <&intc GIC_SPI 494 IRQ_TYPE_EDGE_RISING>,
+					      <&slpi_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&slpi_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&slpi_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&slpi_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&aoss_qmp AOSS_QMP_LS_SLPI>,
+					<&rpmhpd 3>,
+					<&rpmhpd 2>;
+			power-domain-names = "load_state", "lcx", "lmx";
+
+			memory-region = <&slpi_mem>;
+
+			qcom,smem-states = <&slpi_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts = <GIC_SPI 170 IRQ_TYPE_EDGE_RISING>;
+				label = "dsps";
+				qcom,remote-pid = <3>;
+				mboxes = <&apss_shared 24>;
+			};
+		};
+
 		tlmm: pinctrl@3100000 {
 			compatible = "qcom,sm8150-pinctrl";
 			reg = <0x0 0x03100000 0x0 0x300000>,
@@ -343,6 +553,74 @@
 			#interrupt-cells = <2>;
 		};
 
+		remoteproc_mpss: remoteproc@4080000 {
+			compatible = "qcom,sm8150-mpss-pas";
+			reg = <0x0 0x04080000 0x0 0x4040>;
+
+			interrupts-extended = <&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover",
+					  "stop-ack", "shutdown-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&aoss_qmp AOSS_QMP_LS_MODEM>,
+					<&rpmhpd 7>,
+					<&rpmhpd 0>;
+			power-domain-names = "load_state", "cx", "mss";
+
+			memory-region = <&mpss_mem>;
+
+			qcom,smem-states = <&modem_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			glink-edge {
+				interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
+				label = "modem";
+				qcom,remote-pid = <1>;
+				mboxes = <&apss_shared 12>;
+			};
+		};
+
+		remoteproc_cdsp: remoteproc@8300000 {
+			compatible = "qcom,sm8150-cdsp-pas";
+			reg = <0x0 0x08300000 0x0 0x4040>;
+
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&aoss_qmp AOSS_QMP_LS_CDSP>,
+					<&rpmhpd 7>;
+			power-domain-names = "load_state", "cx";
+
+			memory-region = <&cdsp_mem>;
+
+			qcom,smem-states = <&cdsp_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts = <GIC_SPI 574 IRQ_TYPE_EDGE_RISING>;
+				label = "cdsp";
+				qcom,remote-pid = <5>;
+				mboxes = <&apss_shared 4>;
+			};
+		};
+
 		aoss_qmp: power-controller@c300000 {
 			compatible = "qcom,sm8150-aoss-qmp";
 			reg = <0x0 0x0c300000 0x0 0x100000>;
@@ -372,6 +650,40 @@
 			cell-index = <0>;
 		};
 
+		remoteproc_adsp: remoteproc@17300000 {
+			compatible = "qcom,sm8150-adsp-pas";
+			reg = <0x0 0x17300000 0x0 0x4040>;
+
+			interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&aoss_qmp AOSS_QMP_LS_LPASS>,
+					<&rpmhpd 7>;
+			power-domain-names = "load_state", "cx";
+
+			memory-region = <&adsp_mem>;
+
+			qcom,smem-states = <&adsp_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
+				label = "lpass";
+				qcom,remote-pid = <2>;
+				mboxes = <&apss_shared 8>;
+			};
+		};
+
 		intc: interrupt-controller@17a00000 {
 			compatible = "arm,gic-v3";
 			interrupt-controller;
@@ -387,6 +699,12 @@
 			#mbox-cells = <1>;
 		};
 
+		watchdog@17c10000 {
+			compatible = "qcom,apss-wdt-sm8150", "qcom,kpss-wdt";
+			reg = <0 0x17c10000 0 0x1000>;
+			clocks = <&sleep_clk>;
+		};
+
 		timer@17c20000 {
 			#address-cells = <2>;
 			#size-cells = <2>;
@@ -469,6 +787,73 @@
 				clock-names = "xo";
 				clocks = <&xo_board>;
 			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,sm8150-rpmhpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp1 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp2 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs: opp3 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_svs: opp4 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l1: opp5 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_svs_l2: opp6 {
+						opp-level = <224>;
+					};
+
+					rpmhpd_opp_nom: opp7 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp8 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp9 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp10 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp11 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
+		};
+
+		cpufreq_hw: cpufreq@18323000 {
+			compatible = "qcom,cpufreq-hw";
+			reg = <0 0x18323000 0 0x1400>, <0 0x18325800 0 0x1400>,
+			      <0 0x18327800 0 0x1400>;
+			reg-names = "freq-domain0", "freq-domain1",
+				    "freq-domain2";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#freq-domain-cells = <1>;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index 8fdbd2267384..2153842321ce 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -3,22 +3,21 @@ dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m.dtb
 dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-ex.dtb
 dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n.dtb
 dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-ex.dtb
-dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-cat874.dtb r8a774c0-ek874.dtb
-dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-x.dtb r8a7795-h3ulcb.dtb
-dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-kf.dtb
-dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-xs.dtb
-dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-salvator-x.dtb r8a7795-es1-h3ulcb.dtb
-dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-h3ulcb-kf.dtb
-dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-x.dtb r8a7796-m3ulcb.dtb
-dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-m3ulcb-kf.dtb
-dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-xs.dtb
-dtb-$(CONFIG_ARCH_R8A77960) += r8a7796-salvator-x.dtb r8a7796-m3ulcb.dtb
-dtb-$(CONFIG_ARCH_R8A77960) += r8a7796-m3ulcb-kf.dtb
-dtb-$(CONFIG_ARCH_R8A77960) += r8a7796-salvator-xs.dtb
+dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-cat874.dtb r8a774c0-ek874.dtb \
+			       r8a774c0-ek874-idk-2121wr.dtb
+dtb-$(CONFIG_ARCH_R8A7795) += r8a77950-salvator-x.dtb
+dtb-$(CONFIG_ARCH_R8A7795) += r8a77950-ulcb.dtb r8a77950-ulcb-kf.dtb
+dtb-$(CONFIG_ARCH_R8A7795) += r8a77951-salvator-x.dtb r8a77951-salvator-xs.dtb
+dtb-$(CONFIG_ARCH_R8A7795) += r8a77951-ulcb.dtb r8a77951-ulcb-kf.dtb
+dtb-$(CONFIG_ARCH_R8A77950) += r8a77950-salvator-x.dtb
+dtb-$(CONFIG_ARCH_R8A77950) += r8a77950-ulcb.dtb r8a77950-ulcb-kf.dtb
+dtb-$(CONFIG_ARCH_R8A77951) += r8a77951-salvator-x.dtb r8a77951-salvator-xs.dtb
+dtb-$(CONFIG_ARCH_R8A77951) += r8a77951-ulcb.dtb r8a77951-ulcb-kf.dtb
+dtb-$(CONFIG_ARCH_R8A77960) += r8a77960-salvator-x.dtb r8a77960-salvator-xs.dtb
+dtb-$(CONFIG_ARCH_R8A77960) += r8a77960-ulcb.dtb r8a77960-ulcb-kf.dtb
 dtb-$(CONFIG_ARCH_R8A77961) += r8a77961-salvator-xs.dtb
 dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-salvator-x.dtb r8a77965-salvator-xs.dtb
-dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-m3nulcb.dtb
-dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-m3nulcb-kf.dtb
+dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-ulcb.dtb r8a77965-ulcb-kf.dtb
 dtb-$(CONFIG_ARCH_R8A77970) += r8a77970-eagle.dtb r8a77970-v3msk.dtb
 dtb-$(CONFIG_ARCH_R8A77980) += r8a77980-condor.dtb r8a77980-v3hsk.dtb
 dtb-$(CONFIG_ARCH_R8A77990) += r8a77990-ebisu.dtb
diff --git a/arch/arm64/boot/dts/renesas/hihope-common.dtsi b/arch/arm64/boot/dts/renesas/hihope-common.dtsi
index 2c942a7eaeeb..bd056904e8bd 100644
--- a/arch/arm64/boot/dts/renesas/hihope-common.dtsi
+++ b/arch/arm64/boot/dts/renesas/hihope-common.dtsi
@@ -109,8 +109,7 @@
 
 		gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>;
 		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
+		states = <3300000 1>, <1800000 0>;
 	};
 
 	wlan_en_reg: regulator-wlan_en {
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
index 34a9f472fbb4..8f950dabca54 100644
--- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
@@ -521,12 +521,12 @@
 			#interrupt-cells = <2>;
 			interrupt-controller;
 			reg = <0 0xe61c0000 0 0x200>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 407>;
 			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
 			resets = <&cpg 407>;
@@ -837,8 +837,8 @@
 			compatible = "renesas,r8a774a1-usb-dmac",
 				     "renesas,usb-dmac";
 			reg = <0 0xe65a0000 0 0x100>;
-			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "ch0", "ch1";
 			clocks = <&cpg CPG_MOD 330>;
 			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
@@ -851,8 +851,8 @@
 			compatible = "renesas,r8a774a1-usb-dmac",
 				     "renesas,usb-dmac";
 			reg = <0 0xe65b0000 0 0x100>;
-			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "ch0", "ch1";
 			clocks = <&cpg CPG_MOD 331>;
 			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
@@ -878,23 +878,23 @@
 			compatible = "renesas,dmac-r8a774a1",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe6700000 0 0x10000>;
-			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7",
@@ -920,23 +920,23 @@
 			compatible = "renesas,dmac-r8a774a1",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe7300000 0 0x10000>;
-			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7",
@@ -962,23 +962,23 @@
 			compatible = "renesas,dmac-r8a774a1",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe7310000 0 0x10000>;
-			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7",
@@ -2075,23 +2075,23 @@
 			compatible = "renesas,dmac-r8a774a1",
 				     "renesas,rcar-dmac";
 			reg = <0 0xec700000 0 0x10000>;
-			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7",
@@ -2117,23 +2117,23 @@
 			compatible = "renesas,dmac-r8a774a1",
 				     "renesas,rcar-dmac";
 			reg = <0 0xec720000 0 0x10000>;
-			interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7",
@@ -2323,10 +2323,10 @@
 			#size-cells = <2>;
 			bus-range = <0x00 0xff>;
 			device_type = "pci";
-			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
-				0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
-				0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
-				0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+				 <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+				 <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
 			/* Map all possible DDR as inbound ranges */
 			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>;
 			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
@@ -2350,10 +2350,10 @@
 			#size-cells = <2>;
 			bus-range = <0x00 0xff>;
 			device_type = "pci";
-			ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000
-				0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000
-				0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000
-				0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>;
+			ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000>,
+				 <0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000>,
+				 <0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000>,
+				 <0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>;
 			/* Map all possible DDR as inbound ranges */
 			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>;
 			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
index fe78387e4bb8..c40ea300968e 100644
--- a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
@@ -395,12 +395,12 @@
 			#interrupt-cells = <2>;
 			interrupt-controller;
 			reg = <0 0xe61c0000 0 0x200>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 407>;
 			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
 			resets = <&cpg 407>;
@@ -711,8 +711,8 @@
 			compatible = "renesas,r8a774b1-usb-dmac",
 				     "renesas,usb-dmac";
 			reg = <0 0xe65a0000 0 0x100>;
-			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "ch0", "ch1";
 			clocks = <&cpg CPG_MOD 330>;
 			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
@@ -725,8 +725,8 @@
 			compatible = "renesas,r8a774b1-usb-dmac",
 				     "renesas,usb-dmac";
 			reg = <0 0xe65b0000 0 0x100>;
-			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "ch0", "ch1";
 			clocks = <&cpg CPG_MOD 331>;
 			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
@@ -752,23 +752,23 @@
 			compatible = "renesas,dmac-r8a774b1",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe6700000 0 0x10000>;
-			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7",
@@ -794,23 +794,23 @@
 			compatible = "renesas,dmac-r8a774b1",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe7300000 0 0x10000>;
-			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7",
@@ -836,23 +836,23 @@
 			compatible = "renesas,dmac-r8a774b1",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe7310000 0 0x10000>;
-			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7",
@@ -1949,23 +1949,23 @@
 			compatible = "renesas,dmac-r8a774b1",
 				     "renesas,rcar-dmac";
 			reg = <0 0xec700000 0 0x10000>;
-			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7",
@@ -1983,23 +1983,23 @@
 			compatible = "renesas,dmac-r8a774b1",
 				     "renesas,rcar-dmac";
 			reg = <0 0xec720000 0 0x10000>;
-			interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7",
@@ -2192,10 +2192,10 @@
 			#size-cells = <2>;
 			bus-range = <0x00 0xff>;
 			device_type = "pci";
-			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
-				  0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
-				  0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
-				  0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+				 <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+				 <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
 			/* Map all possible DDR as inbound ranges */
 			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>;
 			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
@@ -2219,10 +2219,10 @@
 			#size-cells = <2>;
 			bus-range = <0x00 0xff>;
 			device_type = "pci";
-			ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000
-				  0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000
-				  0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000
-				  0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>;
+			ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000>,
+				 <0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000>,
+				 <0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000>,
+				 <0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>;
 			/* Map all possible DDR as inbound ranges */
 			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>;
 			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts b/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts
index c99b1dec52ef..26aee004a44e 100644
--- a/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts
+++ b/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts
@@ -110,8 +110,7 @@
 
 		gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
 		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
+		states = <3300000 1>, <1800000 0>;
 	};
 
 	wlan_en_reg: fixedregulator {
diff --git a/arch/arm64/boot/dts/renesas/r8a774c0-ek874-idk-2121wr.dts b/arch/arm64/boot/dts/renesas/r8a774c0-ek874-idk-2121wr.dts
new file mode 100644
index 000000000000..a7b27d09f6c2
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774c0-ek874-idk-2121wr.dts
@@ -0,0 +1,116 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Silicon Linux RZ/G2E evaluation kit (EK874),
+ * connected to an Advantech IDK-2121WR 21.5" LVDS panel
+ *
+ * Copyright (C) 2019 Renesas Electronics Corp.
+ */
+
+#include "r8a774c0-ek874.dts"
+
+/ {
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm5 0 50000>;
+
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+
+		power-supply = <&reg_12p0v>;
+		enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
+	};
+
+	panel-lvds {
+		compatible = "advantech,idk-2121wr", "panel-lvds";
+
+		width-mm = <476>;
+		height-mm = <268>;
+
+		data-mapping = "vesa-24";
+
+		panel-timing {
+			clock-frequency = <148500000>;
+			hactive = <1920>;
+			vactive = <1080>;
+			hsync-len = <44>;
+			hfront-porch = <88>;
+			hback-porch = <148>;
+			vfront-porch = <4>;
+			vback-porch = <36>;
+			vsync-len = <5>;
+		};
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				dual-lvds-odd-pixels;
+				panel_in0: endpoint {
+					remote-endpoint = <&lvds0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				dual-lvds-even-pixels;
+				panel_in1: endpoint {
+					remote-endpoint = <&lvds1_out>;
+				};
+			};
+		};
+	};
+};
+
+&gpio0 {
+	/*
+	 * When GP0_17 is low LVDS[01] are connected to the LVDS connector
+	 * When GP0_17 is high LVDS[01] are connected to the LT8918L
+	 */
+	lvds-connector-en-gpio{
+		gpio-hog;
+		gpios = <17 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "lvds-connector-en-gpio";
+	};
+};
+
+&lvds0 {
+	ports {
+		port@1 {
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in0>;
+			};
+		};
+	};
+};
+
+&lvds1 {
+	status = "okay";
+
+	clocks = <&cpg CPG_MOD 727>, <&x13_clk>, <&extal_clk>;
+	clock-names = "fck", "dclkin.0", "extal";
+
+	ports {
+		port@1 {
+			lvds1_out: endpoint {
+				remote-endpoint = <&panel_in1>;
+			};
+		};
+	};
+};
+
+&pfc {
+	pwm5_pins: pwm5 {
+		groups = "pwm5_a";
+		function = "pwm5";
+	};
+};
+
+&pwm5 {
+	pinctrl-0 = <&pwm5_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
index c7bdc3606323..a53cd5fcc401 100644
--- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
@@ -369,12 +369,12 @@
 			#interrupt-cells = <2>;
 			interrupt-controller;
 			reg = <0 0xe61c0000 0 0x200>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 407>;
 			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
 			resets = <&cpg 407>;
@@ -697,8 +697,8 @@
 			compatible = "renesas,r8a774c0-usb-dmac",
 				     "renesas,usb-dmac";
 			reg = <0 0xe65a0000 0 0x100>;
-			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "ch0", "ch1";
 			clocks = <&cpg CPG_MOD 330>;
 			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
@@ -711,8 +711,8 @@
 			compatible = "renesas,r8a774c0-usb-dmac",
 				     "renesas,usb-dmac";
 			reg = <0 0xe65b0000 0 0x100>;
-			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "ch0", "ch1";
 			clocks = <&cpg CPG_MOD 331>;
 			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
@@ -725,23 +725,23 @@
 			compatible = "renesas,dmac-r8a774c0",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe6700000 0 0x10000>;
-			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7",
@@ -767,23 +767,23 @@
 			compatible = "renesas,dmac-r8a774c0",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe7300000 0 0x10000>;
-			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7",
@@ -809,23 +809,23 @@
 			compatible = "renesas,dmac-r8a774c0",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe7310000 0 0x10000>;
-			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7",
@@ -1521,23 +1521,23 @@
 			compatible = "renesas,dmac-r8a774c0",
 				     "renesas,rcar-dmac";
 			reg = <0 0xec700000 0 0x10000>;
-			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7",
@@ -1679,10 +1679,10 @@
 			#size-cells = <2>;
 			bus-range = <0x00 0xff>;
 			device_type = "pci";
-			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
-				  0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
-				  0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
-				  0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+				 <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+				 <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
 			/* Map all possible DDR as inbound ranges */
 			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>;
 			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a77950-salvator-x.dts
index c72968623e94..2438825c9b22 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77950-salvator-x.dts
@@ -6,11 +6,11 @@
  */
 
 /dts-v1/;
-#include "r8a7795-es1.dtsi"
+#include "r8a77950.dtsi"
 #include "salvator-x.dtsi"
 
 / {
-	model = "Renesas Salvator-X board based on r8a7795 ES1.x";
+	model = "Renesas Salvator-X board based on r8a77950";
 	compatible = "renesas,salvator-x", "renesas,r8a7795";
 
 	memory@48000000 {
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a77950-ulcb-kf.dts
index 80791ed27539..dcaaf12cec40 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77950-ulcb-kf.dts
@@ -6,11 +6,11 @@
  * Copyright (C) 2017 Cogent Embedded, Inc.
  */
 
-#include "r8a7795-h3ulcb.dts"
+#include "r8a77950-ulcb.dts"
 #include "ulcb-kf.dtsi"
 
 / {
-	model = "Renesas H3ULCB Kingfisher board based on r8a7795 ES2.0+";
+	model = "Renesas H3ULCB Kingfisher board based on r8a77950";
 	compatible = "shimafuji,kingfisher", "renesas,h3ulcb",
 		     "renesas,r8a7795";
 };
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a77950-ulcb.dts
index 598b98168559..38a6d6a108d4 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77950-ulcb.dts
@@ -7,11 +7,11 @@
  */
 
 /dts-v1/;
-#include "r8a7795-es1.dtsi"
+#include "r8a77950.dtsi"
 #include "ulcb.dtsi"
 
 / {
-	model = "Renesas H3ULCB board based on r8a7795 ES1.x";
+	model = "Renesas H3ULCB board based on r8a77950";
 	compatible = "renesas,h3ulcb", "renesas,r8a7795";
 
 	memory@48000000 {
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi b/arch/arm64/boot/dts/renesas/r8a77950.dtsi
index 14d8513d2a47..15216495e1c8 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77950.dtsi
@@ -1,11 +1,11 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Device Tree Source for the R-Car H3 (R8A77950) ES1.x SoC
+ * Device Tree Source for the R-Car H3 (R8A77950) SoC
  *
  * Copyright (C) 2015 Renesas Electronics Corp.
  */
 
-#include "r8a7795.dtsi"
+#include "r8a77951.dtsi"
 
 &audma0 {
 	iommus = <&ipmmu_mp1 0>, <&ipmmu_mp1 1>,
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a77951-salvator-x.dts
index 72874f675359..a402a2fb6e3c 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77951-salvator-x.dts
@@ -6,11 +6,11 @@
  */
 
 /dts-v1/;
-#include "r8a7795.dtsi"
+#include "r8a77951.dtsi"
 #include "salvator-x.dtsi"
 
 / {
-	model = "Renesas Salvator-X board based on r8a7795 ES2.0+";
+	model = "Renesas Salvator-X board based on r8a77951";
 	compatible = "renesas,salvator-x", "renesas,r8a7795";
 
 	memory@48000000 {
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a77951-salvator-xs.dts
index 36667c81d43d..cef9da4376a3 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77951-salvator-xs.dts
@@ -1,16 +1,16 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Device Tree Source for the Salvator-X 2nd version board with R-Car H3 ES2.0
+ * Device Tree Source for the Salvator-X 2nd version board with R-Car H3 ES2.0+
  *
  * Copyright (C) 2015-2017 Renesas Electronics Corp.
  */
 
 /dts-v1/;
-#include "r8a7795.dtsi"
+#include "r8a77951.dtsi"
 #include "salvator-xs.dtsi"
 
 / {
-	model = "Renesas Salvator-X 2nd version board based on r8a7795 ES2.0+";
+	model = "Renesas Salvator-X 2nd version board based on r8a77951";
 	compatible = "renesas,salvator-xs", "renesas,r8a7795";
 
 	memory@48000000 {
@@ -136,7 +136,7 @@
 	 * - On Salvator-X[S], GP6_3[01] are connected to ADV7482 as irq pins
 	 *   (when SW31 is the default setting on Salvator-XS).
 	 * - If SW31 is the default setting, you cannot use USB2.0 ch3 on
-	 *   r8a7795 with Salvator-XS.
+	 *   r8a77951 with Salvator-XS.
 	 *   Hence the SW31 setting must be changed like 2) below.
 	 *   1) Default setting of SW31: ON-ON-OFF-OFF-OFF-OFF:
 	 *	- Connect GP6_3[01] to ADV7842.
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a77951-ulcb-kf.dts
index 2f24dfc45617..11f943a67703 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77951-ulcb-kf.dts
@@ -6,11 +6,11 @@
  * Copyright (C) 2017 Cogent Embedded, Inc.
  */
 
-#include "r8a7795-es1-h3ulcb.dts"
+#include "r8a77951-ulcb.dts"
 #include "ulcb-kf.dtsi"
 
 / {
-	model = "Renesas H3ULCB Kingfisher board based on r8a7795 ES1.x";
+	model = "Renesas H3ULCB Kingfisher board based on r8a77951";
 	compatible = "shimafuji,kingfisher", "renesas,h3ulcb",
 		     "renesas,r8a7795";
 };
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a77951-ulcb.dts
index 54515eaf0310..8ad8f2a53977 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77951-ulcb.dts
@@ -7,11 +7,11 @@
  */
 
 /dts-v1/;
-#include "r8a7795.dtsi"
+#include "r8a77951.dtsi"
 #include "ulcb.dtsi"
 
 / {
-	model = "Renesas H3ULCB board based on r8a7795 ES2.0+";
+	model = "Renesas H3ULCB board based on r8a77951";
 	compatible = "renesas,h3ulcb", "renesas,r8a7795";
 
 	memory@48000000 {
diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a77951.dtsi
index fde6ec122d3b..a8729eb744db 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77951.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Device Tree Source for the R-Car H3 (R8A77950) SoC
+ * Device Tree Source for the R-Car H3 (R8A77951) SoC
  *
  * Copyright (C) 2015 Renesas Electronics Corp.
  */
@@ -605,12 +605,12 @@
 			#interrupt-cells = <2>;
 			interrupt-controller;
 			reg = <0 0xe61c0000 0 0x200>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 407>;
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
 			resets = <&cpg 407>;
@@ -873,8 +873,8 @@
 			compatible = "renesas,r8a7795-usb-dmac",
 				     "renesas,usb-dmac";
 			reg = <0 0xe65a0000 0 0x100>;
-			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "ch0", "ch1";
 			clocks = <&cpg CPG_MOD 330>;
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
@@ -887,8 +887,8 @@
 			compatible = "renesas,r8a7795-usb-dmac",
 				     "renesas,usb-dmac";
 			reg = <0 0xe65b0000 0 0x100>;
-			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "ch0", "ch1";
 			clocks = <&cpg CPG_MOD 331>;
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
@@ -901,8 +901,8 @@
 			compatible = "renesas,r8a7795-usb-dmac",
 				     "renesas,usb-dmac";
 			reg = <0 0xe6460000 0 0x100>;
-			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "ch0", "ch1";
 			clocks = <&cpg CPG_MOD 326>;
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
@@ -915,8 +915,8 @@
 			compatible = "renesas,r8a7795-usb-dmac",
 				     "renesas,usb-dmac";
 			reg = <0 0xe6470000 0 0x100>;
-			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "ch0", "ch1";
 			clocks = <&cpg CPG_MOD 329>;
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
@@ -951,23 +951,23 @@
 			compatible = "renesas,dmac-r8a7795",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe6700000 0 0x10000>;
-			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7",
@@ -993,23 +993,23 @@
 			compatible = "renesas,dmac-r8a7795",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe7300000 0 0x10000>;
-			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7",
@@ -1035,23 +1035,23 @@
 			compatible = "renesas,dmac-r8a7795",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe7310000 0 0x10000>;
-			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7",
@@ -2343,23 +2343,23 @@
 			compatible = "renesas,dmac-r8a7795",
 				     "renesas,rcar-dmac";
 			reg = <0 0xec700000 0 0x10000>;
-			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7",
@@ -2385,23 +2385,23 @@
 			compatible = "renesas,dmac-r8a7795",
 				     "renesas,rcar-dmac";
 			reg = <0 0xec720000 0 0x10000>;
-			interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7",
@@ -2679,10 +2679,10 @@
 			#size-cells = <2>;
 			bus-range = <0x00 0xff>;
 			device_type = "pci";
-			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
-				0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
-				0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
-				0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+				 <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+				 <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
 			/* Map all possible DDR as inbound ranges */
 			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>;
 			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
@@ -2706,10 +2706,10 @@
 			#size-cells = <2>;
 			bus-range = <0x00 0xff>;
 			device_type = "pci";
-			ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000
-				0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000
-				0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000
-				0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>;
+			ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000>,
+				 <0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000>,
+				 <0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000>,
+				 <0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>;
 			/* Map all possible DDR as inbound ranges */
 			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>;
 			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a77960-salvator-x.dts
index de37e91e3b7a..ecfbeafeaf36 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77960-salvator-x.dts
@@ -6,11 +6,11 @@
  */
 
 /dts-v1/;
-#include "r8a7796.dtsi"
+#include "r8a77960.dtsi"
 #include "salvator-x.dtsi"
 
 / {
-	model = "Renesas Salvator-X board based on r8a7796";
+	model = "Renesas Salvator-X board based on r8a77960";
 	compatible = "renesas,salvator-x", "renesas,r8a7796";
 
 	memory@48000000 {
diff --git a/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a77960-salvator-xs.dts
index a1cbfef2053f..249896a38fdc 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77960-salvator-xs.dts
@@ -6,11 +6,11 @@
  */
 
 /dts-v1/;
-#include "r8a7796.dtsi"
+#include "r8a77960.dtsi"
 #include "salvator-xs.dtsi"
 
 / {
-	model = "Renesas Salvator-X 2nd version board based on r8a7796";
+	model = "Renesas Salvator-X 2nd version board based on r8a77960";
 	compatible = "renesas,salvator-xs", "renesas,r8a7796";
 
 	memory@48000000 {
diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a77960-ulcb-kf.dts
index 2df50eb11f16..2151c37d77a6 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77960-ulcb-kf.dts
@@ -6,11 +6,11 @@
  * Copyright (C) 2017 Cogent Embedded, Inc.
  */
 
-#include "r8a7796-m3ulcb.dts"
+#include "r8a77960-ulcb.dts"
 #include "ulcb-kf.dtsi"
 
 / {
-	model = "Renesas M3ULCB Kingfisher board based on r8a7796";
+	model = "Renesas M3ULCB Kingfisher board based on r8a77960";
 	compatible = "shimafuji,kingfisher", "renesas,m3ulcb",
 		     "renesas,r8a7796";
 };
diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a77960-ulcb.dts
index 9e4594c27fa6..d041042a5619 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77960-ulcb.dts
@@ -7,11 +7,11 @@
  */
 
 /dts-v1/;
-#include "r8a7796.dtsi"
+#include "r8a77960.dtsi"
 #include "ulcb.dtsi"
 
 / {
-	model = "Renesas M3ULCB board based on r8a7796";
+	model = "Renesas M3ULCB board based on r8a77960";
 	compatible = "renesas,m3ulcb", "renesas,r8a7796";
 
 	memory@48000000 {
diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a77960.dtsi
index b9db882b0351..60f156cfd2d6 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77960.dtsi
@@ -574,12 +574,12 @@
 			#interrupt-cells = <2>;
 			interrupt-controller;
 			reg = <0 0xe61c0000 0 0x200>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 407>;
 			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
 			resets = <&cpg 407>;
@@ -825,8 +825,8 @@
 			compatible = "renesas,r8a7796-usb-dmac",
 				     "renesas,usb-dmac";
 			reg = <0 0xe65a0000 0 0x100>;
-			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "ch0", "ch1";
 			clocks = <&cpg CPG_MOD 330>;
 			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
@@ -839,8 +839,8 @@
 			compatible = "renesas,r8a7796-usb-dmac",
 				     "renesas,usb-dmac";
 			reg = <0 0xe65b0000 0 0x100>;
-			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "ch0", "ch1";
 			clocks = <&cpg CPG_MOD 331>;
 			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
@@ -866,23 +866,23 @@
 			compatible = "renesas,dmac-r8a7796",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe6700000 0 0x10000>;
-			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7",
@@ -908,23 +908,23 @@
 			compatible = "renesas,dmac-r8a7796",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe7300000 0 0x10000>;
-			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7",
@@ -950,23 +950,23 @@
 			compatible = "renesas,dmac-r8a7796",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe7310000 0 0x10000>;
-			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7",
@@ -2210,23 +2210,23 @@
 			compatible = "renesas,dmac-r8a7796",
 				     "renesas,rcar-dmac";
 			reg = <0 0xec700000 0 0x10000>;
-			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7",
@@ -2252,23 +2252,23 @@
 			compatible = "renesas,dmac-r8a7796",
 				     "renesas,rcar-dmac";
 			reg = <0 0xec720000 0 0x10000>;
-			interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7",
@@ -2462,10 +2462,10 @@
 			#size-cells = <2>;
 			bus-range = <0x00 0xff>;
 			device_type = "pci";
-			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
-				0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
-				0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
-				0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+				 <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+				 <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
 			/* Map all possible DDR as inbound ranges */
 			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>;
 			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
@@ -2489,10 +2489,10 @@
 			#size-cells = <2>;
 			bus-range = <0x00 0xff>;
 			device_type = "pci";
-			ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000
-				0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000
-				0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000
-				0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>;
+			ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000>,
+				 <0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000>,
+				 <0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000>,
+				 <0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>;
 			/* Map all possible DDR as inbound ranges */
 			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>;
 			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm64/boot/dts/renesas/r8a77961.dtsi b/arch/arm64/boot/dts/renesas/r8a77961.dtsi
index 64466c86b698..be3824bda632 100644
--- a/arch/arm64/boot/dts/renesas/r8a77961.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77961.dtsi
@@ -319,53 +319,133 @@
 		ranges;
 
 		rwdt: watchdog@e6020000 {
+			compatible = "renesas,r8a77961-wdt",
+				     "renesas,rcar-gen3-wdt";
 			reg = <0 0xe6020000 0 0x0c>;
-			/* placeholder */
+			clocks = <&cpg CPG_MOD 402>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 402>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@e6050000 {
+			compatible = "renesas,gpio-r8a77961",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6050000 0 0x50>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 0 16>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 912>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 912>;
+		};
+
+		gpio1: gpio@e6051000 {
+			compatible = "renesas,gpio-r8a77961",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6051000 0 0x50>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 32 29>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 911>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 911>;
 		};
 
 		gpio2: gpio@e6052000 {
+			compatible = "renesas,gpio-r8a77961",
+				     "renesas,rcar-gen3-gpio";
 			reg = <0 0xe6052000 0 0x50>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
 			#gpio-cells = <2>;
 			gpio-controller;
+			gpio-ranges = <&pfc 0 64 15>;
 			#interrupt-cells = <2>;
 			interrupt-controller;
-			/* placeholder */
+			clocks = <&cpg CPG_MOD 910>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 910>;
 		};
 
 		gpio3: gpio@e6053000 {
+			compatible = "renesas,gpio-r8a77961",
+				     "renesas,rcar-gen3-gpio";
 			reg = <0 0xe6053000 0 0x50>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 			#gpio-cells = <2>;
 			gpio-controller;
+			gpio-ranges = <&pfc 0 96 16>;
 			#interrupt-cells = <2>;
 			interrupt-controller;
-			/* placeholder */
+			clocks = <&cpg CPG_MOD 909>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 909>;
 		};
 
 		gpio4: gpio@e6054000 {
+			compatible = "renesas,gpio-r8a77961",
+				     "renesas,rcar-gen3-gpio";
 			reg = <0 0xe6054000 0 0x50>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 			#gpio-cells = <2>;
 			gpio-controller;
+			gpio-ranges = <&pfc 0 128 18>;
 			#interrupt-cells = <2>;
 			interrupt-controller;
-			/* placeholder */
+			clocks = <&cpg CPG_MOD 908>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 908>;
 		};
 
 		gpio5: gpio@e6055000 {
+			compatible = "renesas,gpio-r8a77961",
+				     "renesas,rcar-gen3-gpio";
 			reg = <0 0xe6055000 0 0x50>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 			#gpio-cells = <2>;
 			gpio-controller;
+			gpio-ranges = <&pfc 0 160 26>;
 			#interrupt-cells = <2>;
 			interrupt-controller;
-			/* placeholder */
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 907>;
 		};
 
 		gpio6: gpio@e6055400 {
+			compatible = "renesas,gpio-r8a77961",
+				     "renesas,rcar-gen3-gpio";
 			reg = <0 0xe6055400 0 0x50>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 			#gpio-cells = <2>;
 			gpio-controller;
+			gpio-ranges = <&pfc 0 192 32>;
 			#interrupt-cells = <2>;
 			interrupt-controller;
-			/* placeholder */
+			clocks = <&cpg CPG_MOD 906>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 906>;
+		};
+
+		gpio7: gpio@e6055800 {
+			compatible = "renesas,gpio-r8a77961",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055800 0 0x50>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 224 4>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 905>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 905>;
 		};
 
 		pfc: pin-controller@e6060000 {
@@ -401,27 +481,138 @@
 			/* placeholder */
 		};
 
+		i2c0: i2c@e6500000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77961",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6500000 0 0x40>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 931>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 931>;
+			dmas = <&dmac1 0x91>, <&dmac1 0x90>,
+			       <&dmac2 0x91>, <&dmac2 0x90>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e6508000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77961",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 930>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 930>;
+			dmas = <&dmac1 0x93>, <&dmac1 0x92>,
+			       <&dmac2 0x93>, <&dmac2 0x92>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
 		i2c2: i2c@e6510000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77961",
+				     "renesas,rcar-gen3-i2c";
 			reg = <0 0xe6510000 0 0x40>;
-			/* placeholder */
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 929>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 929>;
+			dmas = <&dmac1 0x95>, <&dmac1 0x94>,
+			       <&dmac2 0x95>, <&dmac2 0x94>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e66d0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77961",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d0000 0 0x40>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 928>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 928>;
+			dmas = <&dmac0 0x97>, <&dmac0 0x96>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
 		};
 
 		i2c4: i2c@e66d8000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77961",
+				     "renesas,rcar-gen3-i2c";
 			reg = <0 0xe66d8000 0 0x40>;
-			/* placeholder */
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 927>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 927>;
+			dmas = <&dmac0 0x99>, <&dmac0 0x98>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@e66e0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77961",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66e0000 0 0x40>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 919>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 919>;
+			dmas = <&dmac0 0x9b>, <&dmac0 0x9a>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@e66e8000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77961",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66e8000 0 0x40>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 918>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 918>;
+			dmas = <&dmac0 0x9d>, <&dmac0 0x9c>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
 		};
 
 		i2c_dvfs: i2c@e60b0000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
+			compatible = "renesas,iic-r8a77961",
+				     "renesas,rcar-gen3-iic",
+				     "renesas,rmobile-iic";
 			reg = <0 0xe60b0000 0 0x425>;
-			/* placeholder */
+			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 926>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 926>;
+			dmas = <&dmac0 0x11>, <&dmac0 0x10>;
+			dma-names = "tx", "rx";
+			status = "disabled";
 		};
 
+
 		hscif1: serial@e6550000 {
 			reg = <0 0xe6550000 0 0x60>;
 			/* placeholder */
@@ -438,11 +629,151 @@
 			/* placeholder */
 		};
 
+		dmac0: dma-controller@e6700000 {
+			compatible = "renesas,dmac-r8a77961",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6700000 0 0x10000>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 219>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 219>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+		};
+
+		dmac1: dma-controller@e7300000 {
+			compatible = "renesas,dmac-r8a77961",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7300000 0 0x10000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 218>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 218>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+		};
+
+		dmac2: dma-controller@e7310000 {
+			compatible = "renesas,dmac-r8a77961",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7310000 0 0x10000>;
+			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 217>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 217>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+		};
+
 		avb: ethernet@e6800000 {
+			compatible = "renesas,etheravb-r8a77961",
+				     "renesas,etheravb-rcar-gen3";
 			reg = <0 0xe6800000 0 0x800>, <0 0xe6a00000 0 0x10000>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15",
+					  "ch16", "ch17", "ch18", "ch19",
+					  "ch20", "ch21", "ch22", "ch23",
+					  "ch24";
+			clocks = <&cpg CPG_MOD 812>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 812>;
+			phy-mode = "rgmii";
 			#address-cells = <1>;
 			#size-cells = <0>;
-			/* placeholder */
+			status = "disabled";
 		};
 
 		pwm1: pwm@e6e31000 {
@@ -574,18 +905,51 @@
 		};
 
 		sdhi0: sd@ee100000 {
+			compatible = "renesas,sdhi-r8a77961",
+				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee100000 0 0x2000>;
-			/* placeholder */
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 314>;
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 314>;
+			status = "disabled";
+		};
+
+		sdhi1: sd@ee120000 {
+			compatible = "renesas,sdhi-r8a77961",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee120000 0 0x2000>;
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 313>;
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 313>;
+			status = "disabled";
 		};
 
 		sdhi2: sd@ee140000 {
+			compatible = "renesas,sdhi-r8a77961",
+				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee140000 0 0x2000>;
-			/* placeholder */
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 312>;
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 312>;
+			status = "disabled";
 		};
 
 		sdhi3: sd@ee160000 {
+			compatible = "renesas,sdhi-r8a77961",
+				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee160000 0 0x2000>;
-			/* placeholder */
+			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 311>;
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 311>;
+			status = "disabled";
 		};
 
 		gic: interrupt-controller@f1010000 {
diff --git a/arch/arm64/boot/dts/renesas/r8a77965-m3nulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a77965-ulcb-kf.dts
index dadad97051b9..12aa08fd6fd8 100644
--- a/arch/arm64/boot/dts/renesas/r8a77965-m3nulcb-kf.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77965-ulcb-kf.dts
@@ -6,7 +6,7 @@
  * Copyright (C) 2018 Cogent Embedded, Inc.
  */
 
-#include "r8a77965-m3nulcb.dts"
+#include "r8a77965-ulcb.dts"
 #include "ulcb-kf.dtsi"
 
 / {
diff --git a/arch/arm64/boot/dts/renesas/r8a77965-m3nulcb.dts b/arch/arm64/boot/dts/renesas/r8a77965-ulcb.dts
index 964078b6cc49..964078b6cc49 100644
--- a/arch/arm64/boot/dts/renesas/r8a77965-m3nulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77965-ulcb.dts
diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
index bdbe197774d2..c17d90bd160e 100644
--- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
@@ -429,12 +429,12 @@
 			#interrupt-cells = <2>;
 			interrupt-controller;
 			reg = <0 0xe61c0000 0 0x200>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 407>;
 			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
 			resets = <&cpg 407>;
@@ -680,8 +680,8 @@
 			compatible = "renesas,r8a77965-usb-dmac",
 				     "renesas,usb-dmac";
 			reg = <0 0xe65a0000 0 0x100>;
-			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "ch0", "ch1";
 			clocks = <&cpg CPG_MOD 330>;
 			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
@@ -694,8 +694,8 @@
 			compatible = "renesas,r8a77965-usb-dmac",
 				     "renesas,usb-dmac";
 			reg = <0 0xe65b0000 0 0x100>;
-			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "ch0", "ch1";
 			clocks = <&cpg CPG_MOD 331>;
 			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
@@ -721,23 +721,23 @@
 			compatible = "renesas,dmac-r8a77965",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe6700000 0 0x10000>;
-			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7",
@@ -763,23 +763,23 @@
 			compatible = "renesas,dmac-r8a77965",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe7300000 0 0x10000>;
-			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7",
@@ -805,23 +805,23 @@
 			compatible = "renesas,dmac-r8a77965",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe7310000 0 0x10000>;
-			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7",
@@ -1937,23 +1937,23 @@
 			compatible = "renesas,dmac-r8a77965",
 				     "renesas,rcar-dmac";
 			reg = <0 0xec700000 0 0x10000>;
-			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7",
@@ -1971,23 +1971,23 @@
 			compatible = "renesas,dmac-r8a77965",
 				     "renesas,rcar-dmac";
 			reg = <0 0xec720000 0 0x10000>;
-			interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7",
@@ -2184,10 +2184,10 @@
 			#size-cells = <2>;
 			bus-range = <0x00 0xff>;
 			device_type = "pci";
-			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
-				0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
-				0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
-				0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+				 <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+				 <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
 			/* Map all possible DDR as inbound ranges */
 			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>;
 			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
@@ -2211,10 +2211,10 @@
 			#size-cells = <2>;
 			bus-range = <0x00 0xff>;
 			device_type = "pci";
-			ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000
-				0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000
-				0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000
-				0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>;
+			ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000>,
+				 <0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000>,
+				 <0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000>,
+				 <0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>;
 			/* Map all possible DDR as inbound ranges */
 			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>;
 			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm64/boot/dts/renesas/r8a77970.dtsi b/arch/arm64/boot/dts/renesas/r8a77970.dtsi
index 0d0558e53533..664a73a2cc69 100644
--- a/arch/arm64/boot/dts/renesas/r8a77970.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77970.dtsi
@@ -302,8 +302,8 @@
 
 		thermal: thermal@e6190000 {
 			compatible = "renesas,thermal-r8a77970";
-			reg =  <0 0xe6190000 0 0x10
-				0 0xe6190100 0 0x120>;
+			reg = <0 0xe6190000 0 0x10>,
+			      <0 0xe6190100 0 0x120>;
 			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
@@ -318,12 +318,12 @@
 			#interrupt-cells = <2>;
 			interrupt-controller;
 			reg = <0 0xe61c0000 0 0x200>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 407>;
 			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
 			resets = <&cpg 407>;
@@ -933,15 +933,15 @@
 			compatible = "renesas,dmac-r8a77970",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe7300000 0 0x10000>;
-			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					  "ch0", "ch1", "ch2", "ch3",
 					  "ch4", "ch5", "ch6", "ch7";
@@ -961,15 +961,15 @@
 			compatible = "renesas,dmac-r8a77970",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe7310000 0 0x10000>;
-			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					  "ch0", "ch1", "ch2", "ch3",
 					  "ch4", "ch5", "ch6", "ch7";
diff --git a/arch/arm64/boot/dts/renesas/r8a77980.dtsi b/arch/arm64/boot/dts/renesas/r8a77980.dtsi
index 4d86669af819..b340fb469999 100644
--- a/arch/arm64/boot/dts/renesas/r8a77980.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77980.dtsi
@@ -348,12 +348,12 @@
 			#interrupt-cells = <2>;
 			interrupt-controller;
 			reg = <0 0xe61c0000 0 0x200>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 407>;
 			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
 			resets = <&cpg 407>;
@@ -1174,23 +1174,23 @@
 			compatible = "renesas,dmac-r8a77980",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe7300000 0 0x10000>;
-			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					  "ch0", "ch1", "ch2", "ch3",
 					  "ch4", "ch5", "ch6", "ch7",
@@ -1216,23 +1216,23 @@
 			compatible = "renesas,dmac-r8a77980",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe7310000 0 0x10000>;
-			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					  "ch0", "ch1", "ch2", "ch3",
 					  "ch4", "ch5", "ch6", "ch7",
@@ -1367,21 +1367,17 @@
 			#size-cells = <2>;
 			bus-range = <0x00 0xff>;
 			device_type = "pci";
-			ranges = <
-				0x01000000 0 0x00000000 0 0xfe100000 0 0x0100000
-				0x02000000 0 0xfe200000 0 0xfe200000 0 0x0200000
-				0x02000000 0 0x30000000 0 0x30000000 0 0x8000000
-				0x42000000 0 0x38000000 0 0x38000000 0 0x8000000
-			>;
-			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000
-				      0 0x80000000>;
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x0100000>,
+				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x0200000>,
+				 <0x02000000 0 0x30000000 0 0x30000000 0 0x8000000>,
+				 <0x42000000 0 0x38000000 0 0x38000000 0 0x8000000>;
+			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>;
 			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0 0 0 0 &gic GIC_SPI 148
-					 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
 			clock-names = "pcie", "pcie_bus";
 			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
index b38f9d442fc0..4fd2b14fbb8b 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
@@ -182,8 +182,7 @@
 
 		gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>;
 		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
+		states = <3300000 1>, <1800000 0>;
 	};
 
 	vcc_sdhi1: regulator-vcc-sdhi1 {
@@ -206,8 +205,7 @@
 
 		gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
 		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
+		states = <3300000 1>, <1800000 0>;
 	};
 
 	vga {
@@ -636,7 +634,6 @@
 	/* audio_clkout0/1/2/3 */
 	#clock-cells = <1>;
 	clock-frequency = <12288000 11289600>;
-	clkout-lr-synchronous;
 
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
index 67a6824a962c..32d91f210246 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
@@ -394,12 +394,12 @@
 			#interrupt-cells = <2>;
 			interrupt-controller;
 			reg = <0 0xe61c0000 0 0x200>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 407>;
 			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
 			resets = <&cpg 407>;
@@ -643,8 +643,8 @@
 			compatible = "renesas,r8a77990-usb-dmac",
 				     "renesas,usb-dmac";
 			reg = <0 0xe65a0000 0 0x100>;
-			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "ch0", "ch1";
 			clocks = <&cpg CPG_MOD 330>;
 			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
@@ -657,8 +657,8 @@
 			compatible = "renesas,r8a77990-usb-dmac",
 				     "renesas,usb-dmac";
 			reg = <0 0xe65b0000 0 0x100>;
-			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "ch0", "ch1";
 			clocks = <&cpg CPG_MOD 331>;
 			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
@@ -671,23 +671,23 @@
 			compatible = "renesas,dmac-r8a77990",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe6700000 0 0x10000>;
-			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7",
@@ -713,23 +713,23 @@
 			compatible = "renesas,dmac-r8a77990",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe7300000 0 0x10000>;
-			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7",
@@ -755,23 +755,23 @@
 			compatible = "renesas,dmac-r8a77990",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe7310000 0 0x10000>;
-			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7",
@@ -1474,23 +1474,23 @@
 			compatible = "renesas,dmac-r8a77990",
 				     "renesas,rcar-dmac";
 			reg = <0 0xec700000 0 0x10000>;
-			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7",
@@ -1635,10 +1635,10 @@
 			#size-cells = <2>;
 			bus-range = <0x00 0xff>;
 			device_type = "pci";
-			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
-				  0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
-				  0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
-				  0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+				 <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+				 <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
 			/* Map all possible DDR as inbound ranges */
 			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>;
 			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
index e6ee2b709ba6..9503007c34c0 100644
--- a/arch/arm64/boot/dts/renesas/r8a77995.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
@@ -231,12 +231,12 @@
 			#interrupt-cells = <2>;
 			interrupt-controller;
 			reg = <0 0xe61c0000 0 0x200>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 407>;
 			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
 			resets = <&cpg 407>;
@@ -365,8 +365,8 @@
 			compatible = "renesas,r8a77995-usb-dmac",
 				     "renesas,usb-dmac";
 			reg = <0 0xe65a0000 0 0x100>;
-			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "ch0", "ch1";
 			clocks = <&cpg CPG_MOD 330>;
 			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
@@ -379,8 +379,8 @@
 			compatible = "renesas,r8a77995-usb-dmac",
 				     "renesas,usb-dmac";
 			reg = <0 0xe65b0000 0 0x100>;
-			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "ch0", "ch1";
 			clocks = <&cpg CPG_MOD 331>;
 			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
@@ -418,15 +418,15 @@
 			compatible = "renesas,dmac-r8a77995",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe6700000 0 0x10000>;
-			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7";
@@ -446,15 +446,15 @@
 			compatible = "renesas,dmac-r8a77995",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe7300000 0 0x10000>;
-			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7";
@@ -474,15 +474,15 @@
 			compatible = "renesas,dmac-r8a77995",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe7310000 0 0x10000>;
-			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7";
diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
index 21e01056e759..98bbcafc8c0d 100644
--- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi
+++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
@@ -232,8 +232,7 @@
 
 		gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
 		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
+		states = <3300000 1>, <1800000 0>;
 	};
 
 	vcc_sdhi3: regulator-vcc-sdhi3 {
@@ -256,8 +255,7 @@
 
 		gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
 		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
+		states = <3300000 1>, <1800000 0>;
 	};
 
 	vga {
diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi
index 3ef89171538f..ff88af8e39d3 100644
--- a/arch/arm64/boot/dts/renesas/ulcb.dtsi
+++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi
@@ -120,8 +120,7 @@
 
 		gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
 		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
+		states = <3300000 1>, <1800000 0>;
 	};
 
 	x12_clk: x12 {
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 48fb631d5451..60d9437096c7 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -33,6 +33,8 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc-mezzanine.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock960.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64-v2.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399pro-rock-pi-n10.dtb
diff --git a/arch/arm64/boot/dts/rockchip/px30-evb.dts b/arch/arm64/boot/dts/rockchip/px30-evb.dts
index 936ed7d71ffc..0a680257d9c2 100644
--- a/arch/arm64/boot/dts/rockchip/px30-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/px30-evb.dts
@@ -112,6 +112,38 @@
 	status = "okay";
 };
 
+&dsi {
+	status = "okay";
+
+	ports {
+		mipi_out: port@1 {
+			reg = <1>;
+
+			mipi_out_panel: endpoint {
+				remote-endpoint = <&mipi_in_panel>;
+			};
+		};
+	};
+
+	panel@0 {
+		compatible = "xinpeng,xpp055c272";
+		reg = <0>;
+		backlight = <&backlight>;
+		iovcc-supply = <&vcc_1v8>;
+		vci-supply = <&vcc3v3_lcd>;
+
+		port {
+			mipi_in_panel: endpoint {
+				remote-endpoint = <&mipi_out_panel>;
+			};
+		};
+	};
+};
+
+&dsi_dphy {
+	status = "okay";
+};
+
 &emmc {
 	bus-width = <8>;
 	cap-mmc-highspeed;
@@ -132,6 +164,11 @@
 	status = "okay";
 };
 
+&gpu {
+	mali-supply = <&vdd_log>;
+	status = "okay";
+};
+
 &i2c0 {
 	status = "okay";
 
@@ -485,6 +522,12 @@
 	status = "okay";
 };
 
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <1>;
+	status = "okay";
+};
+
 &u2phy {
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi
index 8812b70f3911..75908c587511 100644
--- a/arch/arm64/boot/dts/rockchip/px30.dtsi
+++ b/arch/arm64/boot/dts/rockchip/px30.dtsi
@@ -10,6 +10,7 @@
 #include <dt-bindings/pinctrl/rockchip.h>
 #include <dt-bindings/power/px30-power.h>
 #include <dt-bindings/soc/rockchip,boot-mode.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	compatible = "rockchip,px30";
@@ -113,16 +114,11 @@
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp-408000000 {
-			opp-hz = /bits/ 64 <408000000>;
-			opp-microvolt = <950000 950000 1350000>;
-			clock-latency-ns = <40000>;
-			opp-suspend;
-		};
 		opp-600000000 {
 			opp-hz = /bits/ 64 <600000000>;
 			opp-microvolt = <950000 950000 1350000>;
 			clock-latency-ns = <40000>;
+			opp-suspend;
 		};
 		opp-816000000 {
 			opp-hz = /bits/ 64 <816000000>;
@@ -181,6 +177,55 @@
 			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 	};
 
+	thermal_zones: thermal-zones {
+		soc_thermal: soc-thermal {
+			polling-delay-passive = <20>;
+			polling-delay = <1000>;
+			sustainable-power = <750>;
+			thermal-sensors = <&tsadc 0>;
+
+			trips {
+				threshold: trip-point-0 {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				target: trip-point-1 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				soc_crit: soc-crit {
+					temperature = <115000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&target>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					contribution = <4096>;
+				};
+
+				map1 {
+					trip = <&target>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					contribution = <4096>;
+				};
+			};
+		};
+
+		gpu_thermal: gpu-thermal {
+			polling-delay-passive = <100>; /* milliseconds */
+			polling-delay = <1000>; /* milliseconds */
+			thermal-sensors = <&tsadc 1>;
+		};
+	};
+
 	xin24m: xin24m {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -365,6 +410,33 @@
 			compatible = "rockchip,px30-io-voltage-domain";
 			status = "disabled";
 		};
+
+		lvds: lvds {
+			compatible = "rockchip,px30-lvds";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			phys = <&dsi_dphy>;
+			phy-names = "dphy";
+			rockchip,grf = <&grf>;
+			rockchip,output = "lvds";
+			status = "disabled";
+
+			port@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				lvds_vopb_in: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vopb_out_lvds>;
+				};
+
+				lvds_vopl_in: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&vopl_out_lvds>;
+				};
+			};
+		};
 	};
 
 	uart1: serial@ff158000 {
@@ -645,6 +717,26 @@
 		};
 	};
 
+	tsadc: tsadc@ff280000 {
+		compatible = "rockchip,px30-tsadc";
+		reg = <0x0 0xff280000 0x0 0x100>;
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+		assigned-clocks = <&cru SCLK_TSADC>;
+		assigned-clock-rates = <50000>;
+		clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
+		clock-names = "tsadc", "apb_pclk";
+		resets = <&cru SRST_TSADC>;
+		reset-names = "tsadc-apb";
+		rockchip,grf = <&grf>;
+		rockchip,hw-tshut-temp = <120000>;
+		pinctrl-names = "init", "default", "sleep";
+		pinctrl-0 = <&tsadc_otp_gpio>;
+		pinctrl-1 = <&tsadc_otp_out>;
+		pinctrl-2 = <&tsadc_otp_gpio>;
+		#thermal-sensor-cells = <1>;
+		status = "disabled";
+	};
+
 	saradc: saradc@ff288000 {
 		compatible = "rockchip,px30-saradc", "rockchip,rk3399-saradc";
 		reg = <0x0 0xff288000 0x0 0x100>;
@@ -755,6 +847,18 @@
 		};
 	};
 
+	dsi_dphy: phy@ff2e0000 {
+		compatible = "rockchip,px30-dsi-dphy";
+		reg = <0x0 0xff2e0000 0x0 0x10000>;
+		clocks = <&pmucru SCLK_MIPIDSIPHY_REF>, <&cru PCLK_MIPIDSIPHY>;
+		clock-names = "ref", "pclk";
+		resets = <&cru SRST_MIPIDSIPHY_P>;
+		reset-names = "apb";
+		#phy-cells = <0>;
+		power-domains = <&power PX30_PD_VO>;
+		status = "disabled";
+	};
+
 	usb20_otg: usb@ff300000 {
 		compatible = "rockchip,px30-usb", "rockchip,rk3066-usb",
 			     "snps,dwc2";
@@ -820,13 +924,13 @@
 		status = "disabled";
 	};
 
-	sdmmc: dwmmc@ff370000 {
+	sdmmc: mmc@ff370000 {
 		compatible = "rockchip,px30-dw-mshc", "rockchip,rk3288-dw-mshc";
 		reg = <0x0 0xff370000 0x0 0x4000>;
 		interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
 			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
-		clock-names = "biu", "ciu", "ciu-drv", "ciu-sample";
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		fifo-depth = <0x100>;
 		max-frequency = <150000000>;
 		pinctrl-names = "default";
@@ -835,13 +939,13 @@
 		status = "disabled";
 	};
 
-	sdio: dwmmc@ff380000 {
+	sdio: mmc@ff380000 {
 		compatible = "rockchip,px30-dw-mshc", "rockchip,rk3288-dw-mshc";
 		reg = <0x0 0xff380000 0x0 0x4000>;
 		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
 			 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
-		clock-names = "biu", "ciu", "ciu-drv", "ciu-sample";
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		fifo-depth = <0x100>;
 		max-frequency = <150000000>;
 		pinctrl-names = "default";
@@ -850,13 +954,13 @@
 		status = "disabled";
 	};
 
-	emmc: dwmmc@ff390000 {
+	emmc: mmc@ff390000 {
 		compatible = "rockchip,px30-dw-mshc", "rockchip,rk3288-dw-mshc";
 		reg = <0x0 0xff390000 0x0 0x4000>;
 		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
 			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
-		clock-names = "biu", "ciu", "ciu-drv", "ciu-sample";
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		fifo-depth = <0x100>;
 		max-frequency = <150000000>;
 		pinctrl-names = "default";
@@ -865,6 +969,57 @@
 		status = "disabled";
 	};
 
+	gpu: gpu@ff400000 {
+		compatible = "rockchip,px30-mali", "arm,mali-bifrost";
+		reg = <0x0 0xff400000 0x0 0x4000>;
+		interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "job", "mmu", "gpu";
+		clocks = <&cru SCLK_GPU>;
+		#cooling-cells = <2>;
+		power-domains = <&power PX30_PD_GPU>;
+		status = "disabled";
+	};
+
+	dsi: dsi@ff450000 {
+		compatible = "rockchip,px30-mipi-dsi";
+		reg = <0x0 0xff450000 0x0 0x10000>;
+		interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_MIPI_DSI>;
+		clock-names = "pclk";
+		phys = <&dsi_dphy>;
+		phy-names = "dphy";
+		power-domains = <&power PX30_PD_VO>;
+		resets = <&cru SRST_MIPIDSI_HOST_P>;
+		reset-names = "apb";
+		rockchip,grf = <&grf>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				dsi_in_vopb: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vopb_out_dsi>;
+				};
+
+				dsi_in_vopl: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&vopl_out_dsi>;
+				};
+			};
+		};
+	};
+
 	vopb: vop@ff460000 {
 		compatible = "rockchip,px30-vop-big";
 		reg = <0x0 0xff460000 0x0 0xefc>;
@@ -882,6 +1037,16 @@
 		vopb_out: port {
 			#address-cells = <1>;
 			#size-cells = <0>;
+
+			vopb_out_dsi: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&dsi_in_vopb>;
+			};
+
+			vopb_out_lvds: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&lvds_vopb_in>;
+			};
 		};
 	};
 
@@ -914,6 +1079,16 @@
 		vopl_out: port {
 			#address-cells = <1>;
 			#size-cells = <0>;
+
+			vopl_out_dsi: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&dsi_in_vopl>;
+			};
+
+			vopl_out_lvds: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&lvds_vopl_in>;
+			};
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3308.dtsi b/arch/arm64/boot/dts/rockchip/rk3308.dtsi
index 8bdc66c62975..116f1900effb 100644
--- a/arch/arm64/boot/dts/rockchip/rk3308.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3308.dtsi
@@ -584,14 +584,14 @@
 		status = "disabled";
 	};
 
-	sdmmc: dwmmc@ff480000 {
+	sdmmc: mmc@ff480000 {
 		compatible = "rockchip,rk3308-dw-mshc", "rockchip,rk3288-dw-mshc";
 		reg = <0x0 0xff480000 0x0 0x4000>;
 		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 		bus-width = <4>;
 		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
 			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
-		clock-names = "biu", "ciu", "ciu-drv", "ciu-sample";
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		fifo-depth = <0x100>;
 		max-frequency = <150000000>;
 		pinctrl-names = "default";
@@ -599,27 +599,27 @@
 		status = "disabled";
 	};
 
-	emmc: dwmmc@ff490000 {
+	emmc: mmc@ff490000 {
 		compatible = "rockchip,rk3308-dw-mshc", "rockchip,rk3288-dw-mshc";
 		reg = <0x0 0xff490000 0x0 0x4000>;
 		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
 		bus-width = <8>;
 		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
 			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
-		clock-names = "biu", "ciu", "ciu-drv", "ciu-sample";
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		fifo-depth = <0x100>;
 		max-frequency = <150000000>;
 		status = "disabled";
 	};
 
-	sdio: dwmmc@ff4a0000 {
+	sdio: mmc@ff4a0000 {
 		compatible = "rockchip,rk3308-dw-mshc", "rockchip,rk3288-dw-mshc";
 		reg = <0x0 0xff4a0000 0x0 0x4000>;
 		interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
 		bus-width = <4>;
 		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
 			 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
-		clock-names = "biu", "ciu", "ciu-drv", "ciu-sample";
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		fifo-depth = <0x100>;
 		max-frequency = <150000000>;
 		pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index 91306ebed4da..1f53ead52c7f 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -41,6 +41,7 @@
 			reg = <0x0 0x0>;
 			clocks = <&cru ARMCLK>;
 			#cooling-cells = <2>;
+			cpu-idle-states = <&CPU_SLEEP>;
 			dynamic-power-coefficient = <120>;
 			enable-method = "psci";
 			next-level-cache = <&l2>;
@@ -53,6 +54,7 @@
 			reg = <0x0 0x1>;
 			clocks = <&cru ARMCLK>;
 			#cooling-cells = <2>;
+			cpu-idle-states = <&CPU_SLEEP>;
 			dynamic-power-coefficient = <120>;
 			enable-method = "psci";
 			next-level-cache = <&l2>;
@@ -65,6 +67,7 @@
 			reg = <0x0 0x2>;
 			clocks = <&cru ARMCLK>;
 			#cooling-cells = <2>;
+			cpu-idle-states = <&CPU_SLEEP>;
 			dynamic-power-coefficient = <120>;
 			enable-method = "psci";
 			next-level-cache = <&l2>;
@@ -77,12 +80,26 @@
 			reg = <0x0 0x3>;
 			clocks = <&cru ARMCLK>;
 			#cooling-cells = <2>;
+			cpu-idle-states = <&CPU_SLEEP>;
 			dynamic-power-coefficient = <120>;
 			enable-method = "psci";
 			next-level-cache = <&l2>;
 			operating-points-v2 = <&cpu0_opp_table>;
 		};
 
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP: cpu-sleep {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x0010000>;
+				entry-latency-us = <120>;
+				exit-latency-us = <250>;
+				min-residency-us = <900>;
+			};
+		};
+
 		l2: l2-cache0 {
 			compatible = "cache";
 		};
@@ -837,7 +854,7 @@
 		};
 	};
 
-	sdmmc: dwmmc@ff500000 {
+	sdmmc: mmc@ff500000 {
 		compatible = "rockchip,rk3328-dw-mshc", "rockchip,rk3288-dw-mshc";
 		reg = <0x0 0xff500000 0x0 0x4000>;
 		interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
@@ -849,7 +866,7 @@
 		status = "disabled";
 	};
 
-	sdio: dwmmc@ff510000 {
+	sdio: mmc@ff510000 {
 		compatible = "rockchip,rk3328-dw-mshc", "rockchip,rk3288-dw-mshc";
 		reg = <0x0 0xff510000 0x0 0x4000>;
 		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
@@ -861,7 +878,7 @@
 		status = "disabled";
 	};
 
-	emmc: dwmmc@ff520000 {
+	emmc: mmc@ff520000 {
 		compatible = "rockchip,rk3328-dw-mshc", "rockchip,rk3288-dw-mshc";
 		reg = <0x0 0xff520000 0x0 0x4000>;
 		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts
index 8251f3c0d0a8..cbde279ae81d 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts
@@ -83,12 +83,6 @@
 	status = "okay";
 };
 
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
-	status = "okay";
-};
-
 &usb_otg {
 	dr_mode = "otg";
 	status = "okay";
diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
index fd86188010b2..a0df61c61925 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
@@ -204,7 +204,7 @@
 		#clock-cells = <0>;
 	};
 
-	sdmmc: dwmmc@ff0c0000 {
+	sdmmc: mmc@ff0c0000 {
 		compatible = "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc";
 		reg = <0x0 0xff0c0000 0x0 0x4000>;
 		max-frequency = <150000000>;
@@ -218,7 +218,7 @@
 		status = "disabled";
 	};
 
-	sdio0: dwmmc@ff0d0000 {
+	sdio0: mmc@ff0d0000 {
 		compatible = "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc";
 		reg = <0x0 0xff0d0000 0x0 0x4000>;
 		max-frequency = <150000000>;
@@ -232,7 +232,7 @@
 		status = "disabled";
 	};
 
-	emmc: dwmmc@ff0f0000 {
+	emmc: mmc@ff0f0000 {
 		compatible = "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc";
 		reg = <0x0 0xff0f0000 0x0 0x4000>;
 		max-frequency = <150000000>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
index c706db0ee9ec..d63faf38cc81 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
@@ -206,7 +206,7 @@
 		regulator-name = "vdd_log";
 		regulator-always-on;
 		regulator-boot-on;
-		regulator-min-microvolt = <800000>;
+		regulator-min-microvolt = <430000>;
 		regulator-max-microvolt = <1400000>;
 		vin-supply = <&vcc_sys>;
 	};
@@ -660,7 +660,6 @@
 	keep-power-in-suspend;
 	mmc-pwrseq = <&sdio_pwrseq>;
 	non-removable;
-	num-slots = <1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
 	sd-uhs-sdr104;
@@ -669,9 +668,12 @@
 	vqmmc-supply = &vcc1v8_s3;	/* IO line */
 	vmmc-supply = &vcc_sdio;	/* card's power */
 
+	#address-cells = <1>;
+	#size-cells = <0>;
 	status = "okay";
 
 	brcmf: wifi@1 {
+		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 		interrupt-parent = <&gpio0>;
 		interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts
index 9dd3b171e91d..e6c1c94c8d69 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts
@@ -18,7 +18,7 @@
 		     "google,bob", "google,gru", "rockchip,rk3399";
 
 	edp_panel: edp-panel {
-		compatible = "boe,nv101wxmn51", "simple-panel";
+		compatible = "boe,nv101wxmn51";
 		backlight = <&backlight>;
 		power-supply = <&pp3300_disp>;
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts
index b8066868a3fe..2bbef9fcbe27 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts
@@ -39,7 +39,7 @@
 	};
 
 	edp_panel: edp-panel {
-		compatible = "sharp,lq123p1jx31", "simple-panel";
+		compatible = "sharp,lq123p1jx31";
 		backlight = <&backlight>;
 		power-supply = <&pp3300_disp>;
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts b/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts
index c133e8d64b2a..d69a613fb65a 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts
@@ -556,7 +556,6 @@
 &sdmmc {
 	clock-frequency = <150000000>;
 	clock-freq-min-max = <200000 150000000>;
-	supports-sd;
 	bus-width = <4>;
 	cap-mmc-highspeed;
 	cap-sd-highspeed;
@@ -572,7 +571,6 @@
 	bus-width = <8>;
 	mmc-hs400-1_8v;
 	mmc-hs400-enhanced-strobe;
-	supports-emmc;
 	non-removable;
 	keep-power-in-suspend;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi
index 4944d78a0a1c..e87a04477440 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi
@@ -654,9 +654,12 @@
 	sd-uhs-sdr104;
 	vqmmc-supply = <&vcc1v8_s3>;
 	vmmc-supply = <&vccio_sd>;
+	#address-cells = <1>;
+	#size-cells = <0>;
 	status = "okay";
 
 	brcmf: wifi@1 {
+		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 		interrupt-parent = <&gpio0>;
 		interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts b/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts
index 2a127985ab17..e0d75617bb7e 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts
@@ -94,31 +94,9 @@
 	};
 };
 
-&gpu_thermal {
-	trips {
-		gpu_warm: gpu_warm {
-			temperature = <55000>;
-			hysteresis = <2000>;
-			type = "active";
-		};
-
-		gpu_hot: gpu_hot {
-			temperature = <65000>;
-			hysteresis = <2000>;
-			type = "active";
-		};
-	};
-	cooling-maps {
-		map1 {
-			trip = <&gpu_warm>;
-			cooling-device = <&fan THERMAL_NO_LIMIT 1>;
-		};
-
-		map2 {
-			trip = <&gpu_hot>;
-			cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
-		};
-	};
+&pcie0 {
+	num-lanes = <4>;
+	vpcie3v3-supply = <&vcc3v3_sys>;
 };
 
 &pinctrl {
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
index b788ae4f47f0..c88018a0ef35 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
@@ -48,7 +48,7 @@
 	};
 
 	/* switched by pmic_sleep */
-	vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
+	vcc1v8_s3: vcc1v8-s3 {
 		compatible = "regulator-fixed";
 		regulator-always-on;
 		regulator-boot-on;
@@ -71,6 +71,27 @@
 		vin-supply = <&vcc3v3_sys>;
 	};
 
+	/*
+	 * Really, this is supplied by vcc_1v8, and vcc1v8_s3 only
+	 * drives the enable pin, but we can't quite model that.
+	 */
+	vcca0v9_s3: vcca0v9-s3 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		regulator-name = "vcca0v9_s3";
+		vin-supply = <&vcc1v8_s3>;
+	};
+
+	/* As above, actually supplied by vcc3v3_sys */
+	vcca1v8_s3: vcca1v8-s3 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-name = "vcca1v8_s3";
+		vin-supply = <&vcc1v8_s3>;
+	};
+
 	vbus_typec: vbus-typec {
 		compatible = "regulator-fixed";
 		regulator-min-microvolt = <5000000>;
@@ -485,7 +506,9 @@
 &pcie0 {
 	ep-gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>;
 	max-link-speed = <2>;
-	num-lanes = <4>;
+	num-lanes = <2>;
+	vpcie0v9-supply = <&vcca0v9_s3>;
+	vpcie1v8-supply = <&vcca1v8_s3>;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts
index 0541dfce924d..9c659f3115c8 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts
@@ -648,9 +648,12 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
 	sd-uhs-sdr104;
+	#address-cells = <1>;
+	#size-cells = <0>;
 	status = "okay";
 
 	brcmf: wifi@1 {
+		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 		interrupt-parent = <&gpio0>;
 		interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts
index d6b3042cffa9..2acb3d500fb9 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts
@@ -32,8 +32,6 @@
 		gpio = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&vcc3v3_pcie_en>;
-		regulator-always-on;
-		regulator-boot-on;
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		vin-supply = <&dc_12v>;
@@ -50,6 +48,8 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie_perst>;
 	vpcie3v3-supply = <&vcc3v3_pcie>;
+	vpcie1v8-supply = <&vcc1v8_pmu>;
+	vpcie0v9-supply = <&vcca_0v9>;
 	status = "okay";
 };
 
@@ -70,3 +70,24 @@
 		};
 	};
 };
+
+&sdio0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v3_ngff>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
index 7e07dae33d0f..9f225e9c3d54 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
@@ -110,20 +110,6 @@
 		regulator-max-microvolt = <5000000>;
 	};
 
-	/*
-	 * should be placed inside mp8859, but not until mp8859 has
-	 * its own dt-binding.
-	 */
-	dc_12v: mp8859-dcdc1 {
-		compatible = "regulator-fixed";
-		regulator-name = "dc_12v";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
-		vin-supply = <&vcc_vbus_typec0>;
-	};
-
 	/* switched by pmic_sleep */
 	vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
 		compatible = "regulator-fixed";
@@ -135,6 +121,19 @@
 		vin-supply = <&vcc_1v8>;
 	};
 
+	vcc3v0_sd: vcc3v0-sd {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PD6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc3v0_sd_en>;
+		regulator-name = "vcc3v0_sd";
+		regulator-boot-on;
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
 	vcc3v3_sys: vcc3v3-sys {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc3v3_sys";
@@ -145,6 +144,16 @@
 		vin-supply = <&dc_12v>;
 	};
 
+	vcca_0v9: vcca-0v9 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcca_0v9";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
 	/* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
 	vcc5v0_host: vcc5v0-host-regulator {
 		compatible = "regulator-fixed";
@@ -153,7 +162,6 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&vcc5v0_host_en &hub_rst>;
 		regulator-name = "vcc5v0_host";
-		regulator-always-on;
 		vin-supply = <&vcc_sys>;
 	};
 
@@ -175,7 +183,6 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&vcc_sys_en>;
 		regulator-name = "vcc_sys";
-		regulator-always-on;
 		regulator-boot-on;
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
@@ -188,9 +195,9 @@
 		regulator-name = "vdd_log";
 		regulator-always-on;
 		regulator-boot-on;
-		regulator-min-microvolt = <800000>;
+		regulator-min-microvolt = <450000>;
 		regulator-max-microvolt = <1400000>;
-		vin-supply = <&vcc3v3_sys>;
+		pwm-supply = <&vcc3v3_sys>;
 	};
 };
 
@@ -238,6 +245,11 @@
 	status = "okay";
 };
 
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
 &hdmi {
 	ddc-i2c-bus = <&i2c3>;
 	pinctrl-names = "default";
@@ -245,6 +257,10 @@
 	status = "okay";
 };
 
+&hdmi_sound {
+	status = "okay";
+};
+
 &i2c0 {
 	clock-frequency = <400000>;
 	i2c-scl-rising-time-ns = <168>;
@@ -360,7 +376,6 @@
 
 			vcc_sdio: LDO_REG4 {
 				regulator-name = "vcc_sdio";
-				regulator-always-on;
 				regulator-boot-on;
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3000000>;
@@ -465,8 +480,6 @@
 		regulator-min-microvolt = <712500>;
 		regulator-max-microvolt = <1500000>;
 		regulator-ramp-delay = <1000>;
-		regulator-always-on;
-		regulator-boot-on;
 		vin-supply = <&vcc3v3_sys>;
 
 		regulator-state-mem {
@@ -519,6 +532,24 @@
 		vbus-supply = <&vcc_vbus_typec0>;
 		status = "okay";
 	};
+
+	mp8859: regulator@66 {
+		compatible = "mps,mp8859";
+		reg = <0x66>;
+		dc_12v: mp8859_dcdc {
+			regulator-name = "dc_12v";
+			regulator-min-microvolt = <12000000>;
+			regulator-max-microvolt = <12000000>;
+			regulator-always-on;
+			regulator-boot-on;
+			vin-supply = <&vcc_vbus_typec0>;
+
+			regulator-state-mem {
+				regulator-on-in-suspend;
+				regulator-suspend-microvolt = <12000000>;
+			};
+		};
+	};
 };
 
 &i2s0 {
@@ -559,7 +590,7 @@
 
 	lcd-panel {
 		lcd_panel_reset: lcd-panel-reset {
-			rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
+			rockchip,pins = <4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
@@ -593,6 +624,12 @@
 		};
 	};
 
+	sdmmc {
+		vcc3v0_sd_en: vcc3v0-sd-en {
+			rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	pmic {
 		pmic_int_l: pmic-int-l {
 			rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
@@ -645,24 +682,34 @@
 
 &sdmmc {
 	bus-width = <4>;
-	cap-mmc-highspeed;
 	cap-sd-highspeed;
 	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
 	disable-wp;
 	max-frequency = <150000000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v0_sd>;
+	vqmmc-supply = <&vcc_sdio>;
 	status = "okay";
 };
 
 &sdhci {
 	bus-width = <8>;
-	mmc-hs400-1_8v;
-	mmc-hs400-enhanced-strobe;
 	non-removable;
 	status = "okay";
 };
 
+&spi1 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+	};
+};
+
 &tcphy0 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts
index 188d9dfc297b..3923ec01ef66 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts
@@ -53,6 +53,16 @@
 		vin-supply = <&vcc12v_dcin>;
 	};
 
+	vcc_0v9: vcc-0v9 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_0v9";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
 	vcc3v3_pcie: vcc3v3-pcie-regulator {
 		compatible = "regulator-fixed";
 		enable-active-high;
@@ -463,6 +473,22 @@
 	pmu1830-supply = <&vcc_3v0>;
 };
 
+&pcie_phy {
+	status = "okay";
+};
+
+&pcie0 {
+	ep-gpios = <&gpio4 RK_PD3 GPIO_ACTIVE_HIGH>;
+	max-link-speed = <2>;
+	num-lanes = <4>;
+	pinctrl-0 = <&pcie_clkreqnb_cpm>;
+	pinctrl-names = "default";
+	vpcie0v9-supply = <&vcc_0v9>;
+	vpcie1v8-supply = <&vcc_1v8>;
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
 &pinctrl {
 	bt {
 		bt_enable_h: bt-enable-h {
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi
index c7d48d41e184..b69f0f2cbd67 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi
@@ -76,6 +76,15 @@
 		regulator-always-on;
 		vin-supply = <&vcc5v0_sys>;
 	};
+
+	vcc_0v9: vcc-0v9 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_0v9";
+		regulator-always-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
 };
 
 &cpu_l0 {
@@ -384,6 +393,8 @@
 	num-lanes = <4>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie_clkreqn_cpm>;
+	vpcie0v9-supply = <&vcc_0v9>;
+	vpcie1v8-supply = <&vcca_1v8>;
 	vpcie3v3-supply = <&vcc3v3_pcie>;
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64-v2.dts b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64-v2.dts
new file mode 100644
index 000000000000..304e3c51391c
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64-v2.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com>
+ * Copyright (c) 2019 Katsuhiro Suzuki <katsuhiro@katsuster.net>
+ */
+
+/dts-v1/;
+#include "rk3399-rockpro64.dtsi"
+
+/ {
+	model = "Pine64 RockPro64 v2.0";
+	compatible = "pine64,rockpro64-v2.0", "pine64,rockpro64", "rockchip,rk3399";
+};
+
+&i2c1 {
+	es8316: codec@10 {
+		compatible = "everest,es8316";
+		reg = <0x10>;
+		clocks = <&cru SCLK_I2S_8CH_OUT>;
+		clock-names = "mclk";
+		#sound-dai-cells = <0>;
+
+		port {
+			es8316_p0_0: endpoint {
+				remote-endpoint = <&i2s1_p0_0>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
index 7f4b2eba31d4..4b42717800f7 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
@@ -2,481 +2,18 @@
 /*
  * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
  * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com>
+ * Copyright (c) 2019 Katsuhiro Suzuki <katsuhiro@katsuster.net>
  */
 
 /dts-v1/;
-#include <dt-bindings/input/linux-event-codes.h>
-#include <dt-bindings/pwm/pwm.h>
-#include "rk3399.dtsi"
-#include "rk3399-opp.dtsi"
+#include "rk3399-rockpro64.dtsi"
 
 / {
-	model = "Pine64 RockPro64";
-	compatible = "pine64,rockpro64", "rockchip,rk3399";
-
-	chosen {
-		stdout-path = "serial2:1500000n8";
-	};
-
-	clkin_gmac: external-gmac-clock {
-		compatible = "fixed-clock";
-		clock-frequency = <125000000>;
-		clock-output-names = "clkin_gmac";
-		#clock-cells = <0>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		autorepeat;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pwrbtn>;
-
-		power {
-			debounce-interval = <100>;
-			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
-			label = "GPIO Key Power";
-			linux,code = <KEY_POWER>;
-			wakeup-source;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>;
-
-		work-led {
-			label = "work";
-			default-state = "on";
-			gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
-		};
-
-		diy-led {
-			label = "diy";
-			default-state = "off";
-			gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	fan: pwm-fan {
-		compatible = "pwm-fan";
-		#cooling-cells = <2>;
-		fan-supply = <&vcc12v_dcin>;
-		pwms = <&pwm1 0 50000 0>;
-	};
-
-	sdio_pwrseq: sdio-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		clocks = <&rk808 1>;
-		clock-names = "ext_clock";
-		pinctrl-names = "default";
-		pinctrl-0 = <&wifi_enable_h>;
-
-		/*
-		 * On the module itself this is one of these (depending
-		 * on the actual card populated):
-		 * - SDIO_RESET_L_WL_REG_ON
-		 * - PDN (power down when low)
-		 */
-		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
-	};
-
-	sound {
-		compatible = "audio-graph-card";
-		label = "rockchip,rk3399";
-		dais = <&i2s1_p0>;
-	};
-
-	vcc12v_dcin: vcc12v-dcin {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc12v_dcin";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
-	};
-
-	/* switched by pmic_sleep */
-	vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc1v8_s3";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		vin-supply = <&vcc_1v8>;
-	};
-
-	vcc3v3_pcie: vcc3v3-pcie-regulator {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pcie_pwr_en>;
-		regulator-name = "vcc3v3_pcie";
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&vcc12v_dcin>;
-	};
-
-	vcc3v3_sys: vcc3v3-sys {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc3v3_sys";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&vcc5v0_sys>;
-	};
-
-	/* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
-	vcc5v0_host: vcc5v0-host-regulator {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&vcc5v0_host_en>;
-		regulator-name = "vcc5v0_host";
-		regulator-always-on;
-		vin-supply = <&vcc5v0_usb>;
-	};
-
-	vcc5v0_typec: vcc5v0-typec-regulator {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&vcc5v0_typec_en>;
-		regulator-name = "vcc5v0_typec";
-		regulator-always-on;
-		vin-supply = <&vcc5v0_usb>;
-	};
-
-	vcc5v0_sys: vcc5v0-sys {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc5v0_sys";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&vcc12v_dcin>;
-	};
-
-	vcc5v0_usb: vcc5v0-usb {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc5v0_usb";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&vcc12v_dcin>;
-	};
-
-	vdd_log: vdd-log {
-		compatible = "pwm-regulator";
-		pwms = <&pwm2 0 25000 1>;
-		regulator-name = "vdd_log";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <800000>;
-		regulator-max-microvolt = <1700000>;
-		vin-supply = <&vcc5v0_sys>;
-	};
-};
-
-&cpu_l0 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l1 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l2 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l3 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_b0 {
-	cpu-supply = <&vdd_cpu_b>;
-};
-
-&cpu_b1 {
-	cpu-supply = <&vdd_cpu_b>;
-};
-
-&emmc_phy {
-	status = "okay";
-};
-
-&gmac {
-	assigned-clocks = <&cru SCLK_RMII_SRC>;
-	assigned-clock-parents = <&clkin_gmac>;
-	clock_in_out = "input";
-	phy-supply = <&vcc_lan>;
-	phy-mode = "rgmii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&rgmii_pins>;
-	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
-	snps,reset-active-low;
-	snps,reset-delays-us = <0 10000 50000>;
-	tx_delay = <0x28>;
-	rx_delay = <0x11>;
-	status = "okay";
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c3>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&hdmi_cec>;
-	status = "okay";
-};
-
-&hdmi_sound {
-	status = "okay";
-};
-
-&gpu {
-	mali-supply = <&vdd_gpu>;
-	status = "okay";
-};
-
-&i2c0 {
-	clock-frequency = <400000>;
-	i2c-scl-rising-time-ns = <168>;
-	i2c-scl-falling-time-ns = <4>;
-	status = "okay";
-
-	rk808: pmic@1b {
-		compatible = "rockchip,rk808";
-		reg = <0x1b>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
-		#clock-cells = <1>;
-		clock-output-names = "xin32k", "rk808-clkout2";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pmic_int_l>;
-		rockchip,system-power-controller;
-		wakeup-source;
-
-		vcc1-supply = <&vcc5v0_sys>;
-		vcc2-supply = <&vcc5v0_sys>;
-		vcc3-supply = <&vcc5v0_sys>;
-		vcc4-supply = <&vcc5v0_sys>;
-		vcc6-supply = <&vcc5v0_sys>;
-		vcc7-supply = <&vcc5v0_sys>;
-		vcc8-supply = <&vcc3v3_sys>;
-		vcc9-supply = <&vcc5v0_sys>;
-		vcc10-supply = <&vcc5v0_sys>;
-		vcc11-supply = <&vcc5v0_sys>;
-		vcc12-supply = <&vcc3v3_sys>;
-		vddio-supply = <&vcca_1v8>;
-
-		regulators {
-			vdd_center: DCDC_REG1 {
-				regulator-name = "vdd_center";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-ramp-delay = <6001>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vdd_cpu_l: DCDC_REG2 {
-				regulator-name = "vdd_cpu_l";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-ramp-delay = <6001>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_ddr: DCDC_REG3 {
-				regulator-name = "vcc_ddr";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			vcc_1v8: DCDC_REG4 {
-				regulator-name = "vcc_1v8";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			vcc1v8_dvp: LDO_REG1 {
-				regulator-name = "vcc1v8_dvp";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc3v0_touch: LDO_REG2 {
-				regulator-name = "vcc3v0_touch";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcca_1v8: LDO_REG3 {
-				regulator-name = "vcca_1v8";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			vcc_sdio: LDO_REG4 {
-				regulator-name = "vcc_sdio";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3000000>;
-				};
-			};
-
-			vcca3v0_codec: LDO_REG5 {
-				regulator-name = "vcca3v0_codec";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_1v5: LDO_REG6 {
-				regulator-name = "vcc_1v5";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1500000>;
-				};
-			};
-
-			vcca1v8_codec: LDO_REG7 {
-				regulator-name = "vcca1v8_codec";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_3v0: LDO_REG8 {
-				regulator-name = "vcc_3v0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3000000>;
-				};
-			};
-
-			vcc3v3_s3: vcc_lan: SWITCH_REG1 {
-				regulator-name = "vcc3v3_s3";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc3v3_s0: SWITCH_REG2 {
-				regulator-name = "vcc3v3_s0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-		};
-	};
-
-	vdd_cpu_b: regulator@40 {
-		compatible = "silergy,syr827";
-		reg = <0x40>;
-		fcs,suspend-voltage-selector = <1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&vsel1_gpio>;
-		regulator-name = "vdd_cpu_b";
-		regulator-min-microvolt = <712500>;
-		regulator-max-microvolt = <1500000>;
-		regulator-ramp-delay = <1000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&vcc5v0_sys>;
-
-		regulator-state-mem {
-			regulator-off-in-suspend;
-		};
-	};
-
-	vdd_gpu: regulator@41 {
-		compatible = "silergy,syr828";
-		reg = <0x41>;
-		fcs,suspend-voltage-selector = <1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&vsel2_gpio>;
-		regulator-name = "vdd_gpu";
-		regulator-min-microvolt = <712500>;
-		regulator-max-microvolt = <1500000>;
-		regulator-ramp-delay = <1000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&vcc5v0_sys>;
-
-		regulator-state-mem {
-			regulator-off-in-suspend;
-		};
-	};
+	model = "Pine64 RockPro64 v2.1";
+	compatible = "pine64,rockpro64-v2.1", "pine64,rockpro64", "rockchip,rk3399";
 };
 
 &i2c1 {
-	i2c-scl-rising-time-ns = <300>;
-	i2c-scl-falling-time-ns = <15>;
-	status = "okay";
-
 	es8316: codec@11 {
 		compatible = "everest,es8316";
 		reg = <0x11>;
@@ -491,291 +28,3 @@
 		};
 	};
 };
-
-&i2c3 {
-	i2c-scl-rising-time-ns = <450>;
-	i2c-scl-falling-time-ns = <15>;
-	status = "okay";
-};
-
-&i2c4 {
-	i2c-scl-rising-time-ns = <600>;
-	i2c-scl-falling-time-ns = <20>;
-	status = "okay";
-
-	fusb0: typec-portc@22 {
-		compatible = "fcs,fusb302";
-		reg = <0x22>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&fusb0_int>;
-		vbus-supply = <&vcc5v0_typec>;
-		status = "okay";
-	};
-};
-
-&i2s0 {
-	rockchip,playback-channels = <8>;
-	rockchip,capture-channels = <8>;
-	status = "okay";
-};
-
-&i2s1 {
-	rockchip,playback-channels = <2>;
-	rockchip,capture-channels = <2>;
-	status = "okay";
-
-	i2s1_p0: port {
-		i2s1_p0_0: endpoint {
-			dai-format = "i2s";
-			mclk-fs = <256>;
-			remote-endpoint = <&es8316_p0_0>;
-		};
-	};
-};
-
-&i2s2 {
-	status = "okay";
-};
-
-&io_domains {
-	status = "okay";
-
-	bt656-supply = <&vcc1v8_dvp>;
-	audio-supply = <&vcc_3v0>;
-	sdmmc-supply = <&vcc_sdio>;
-	gpio1830-supply = <&vcc_3v0>;
-};
-
-&pcie0 {
-	ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
-	num-lanes = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pcie_perst>;
-	vpcie12v-supply = <&vcc12v_dcin>;
-	vpcie3v3-supply = <&vcc3v3_pcie>;
-	status = "okay";
-};
-
-&pcie_phy {
-	status = "okay";
-};
-
-&pmu_io_domains {
-	pmu1830-supply = <&vcc_3v0>;
-	status = "okay";
-};
-
-&pinctrl {
-	buttons {
-		pwrbtn: pwrbtn {
-			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	fusb302x {
-		fusb0_int: fusb0-int {
-			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	leds {
-		work_led_gpio: work_led-gpio {
-			rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		diy_led_gpio: diy_led-gpio {
-			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	pcie {
-		pcie_perst: pcie-perst {
-			rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		pcie_pwr_en: pcie-pwr-en {
-			rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	pmic {
-		pmic_int_l: pmic-int-l {
-			rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-
-		vsel1_gpio: vsel1-gpio {
-			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
-		};
-
-		vsel2_gpio: vsel2-gpio {
-			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
-		};
-	};
-
-	sdio-pwrseq {
-		wifi_enable_h: wifi-enable-h {
-			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	usb-typec {
-		vcc5v0_typec_en: vcc5v0_typec_en {
-			rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	usb2 {
-		vcc5v0_host_en: vcc5v0-host-en {
-			rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-};
-
-&pwm0 {
-	status = "okay";
-};
-
-&pwm1 {
-	status = "okay";
-};
-
-&pwm2 {
-	status = "okay";
-};
-
-&saradc {
-	vref-supply = <&vcca1v8_s3>;
-	status = "okay";
-};
-
-&sdmmc {
-	bus-width = <4>;
-	cap-sd-highspeed;
-	cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
-	disable-wp;
-	max-frequency = <150000000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
-	status = "okay";
-};
-
-&sdhci {
-	bus-width = <8>;
-	mmc-hs200-1_8v;
-	non-removable;
-	status = "okay";
-};
-
-&spi1 {
-	status = "okay";
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <10000000>;
-	};
-};
-
-&tcphy0 {
-	status = "okay";
-};
-
-&tcphy1 {
-	status = "okay";
-};
-
-&tsadc {
-	/* tshut mode 0:CRU 1:GPIO */
-	rockchip,hw-tshut-mode = <1>;
-	/* tshut polarity 0:LOW 1:HIGH */
-	rockchip,hw-tshut-polarity = <1>;
-	status = "okay";
-};
-
-&u2phy0 {
-	status = "okay";
-
-	u2phy0_otg: otg-port {
-		status = "okay";
-	};
-
-	u2phy0_host: host-port {
-		phy-supply = <&vcc5v0_host>;
-		status = "okay";
-	};
-};
-
-&u2phy1 {
-	status = "okay";
-
-	u2phy1_otg: otg-port {
-		status = "okay";
-	};
-
-	u2phy1_host: host-port {
-		phy-supply = <&vcc5v0_host>;
-		status = "okay";
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_xfer &uart0_cts>;
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&usb_host0_ehci {
-	status = "okay";
-};
-
-&usb_host0_ohci {
-	status = "okay";
-};
-
-&usb_host1_ehci {
-	status = "okay";
-};
-
-&usb_host1_ohci {
-	status = "okay";
-};
-
-&usbdrd3_0 {
-	status = "okay";
-};
-
-&usbdrd_dwc3_0 {
-	status = "okay";
-	dr_mode = "otg";
-};
-
-&usbdrd3_1 {
-	status = "okay";
-};
-
-&usbdrd_dwc3_1 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&vopb {
-	status = "okay";
-};
-
-&vopb_mmu {
-	status = "okay";
-};
-
-&vopl {
-	status = "okay";
-};
-
-&vopl_mmu {
-	status = "okay";
-};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
new file mode 100644
index 000000000000..9bca25801260
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
@@ -0,0 +1,797 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com>
+ */
+
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	clkin_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "clkin_gmac";
+		#clock-cells = <0>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwrbtn>;
+
+		power {
+			debounce-interval = <100>;
+			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "GPIO Key Power";
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>;
+
+		work-led {
+			label = "work";
+			default-state = "on";
+			gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
+		};
+
+		diy-led {
+			label = "diy";
+			default-state = "off";
+			gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		#cooling-cells = <2>;
+		fan-supply = <&vcc12v_dcin>;
+		pwms = <&pwm1 0 50000 0>;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk808 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+	};
+
+	sound {
+		compatible = "audio-graph-card";
+		label = "rockchip,rk3399";
+		dais = <&i2s1_p0>;
+	};
+
+	vcc12v_dcin: vcc12v-dcin {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	/* switched by pmic_sleep */
+	vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v8_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_1v8>;
+	};
+
+	vcc3v3_pcie: vcc3v3-pcie-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie_pwr_en>;
+		regulator-name = "vcc3v3_pcie";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	/* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
+	vcc5v0_host: vcc5v0-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host_en>;
+		regulator-name = "vcc5v0_host";
+		regulator-always-on;
+		vin-supply = <&vcc5v0_usb>;
+	};
+
+	vcc5v0_typec: vcc5v0-typec-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_typec_en>;
+		regulator-name = "vcc5v0_typec";
+		regulator-always-on;
+		vin-supply = <&vcc5v0_usb>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc5v0_usb: vcc5v0-usb {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vdd_log: vdd-log {
+		compatible = "pwm-regulator";
+		pwms = <&pwm2 0 25000 1>;
+		regulator-name = "vdd_log";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1700000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_RMII_SRC>;
+	assigned-clock-parents = <&clkin_gmac>;
+	clock_in_out = "input";
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	tx_delay = <0x28>;
+	rx_delay = <0x11>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_cec>;
+	status = "okay";
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-rising-time-ns = <168>;
+	i2c-scl-falling-time-ns = <4>;
+	status = "okay";
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc5v0_sys>;
+		vcc12-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcca_1v8>;
+
+		regulators {
+			vdd_center: DCDC_REG1 {
+				regulator-name = "vdd_center";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-name = "vdd_cpu_l";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG4 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc1v8_dvp: LDO_REG1 {
+				regulator-name = "vcc1v8_dvp";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v0_touch: LDO_REG2 {
+				regulator-name = "vcc3v0_touch";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca_1v8: LDO_REG3 {
+				regulator-name = "vcca_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_sdio: LDO_REG4 {
+				regulator-name = "vcc_sdio";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcca3v0_codec: LDO_REG5 {
+				regulator-name = "vcca3v0_codec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v5: LDO_REG6 {
+				regulator-name = "vcc_1v5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1500000>;
+				};
+			};
+
+			vcca1v8_codec: LDO_REG7 {
+				regulator-name = "vcca1v8_codec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v0: LDO_REG8 {
+				regulator-name = "vcc_3v0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc3v3_s3: vcc_lan: SWITCH_REG1 {
+				regulator-name = "vcc3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_s0: SWITCH_REG2 {
+				regulator-name = "vcc3v3_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+
+	vdd_cpu_b: regulator@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vsel1_gpio>;
+		regulator-name = "vdd_cpu_b";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_gpu: regulator@41 {
+		compatible = "silergy,syr828";
+		reg = <0x41>;
+		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vsel2_gpio>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c1 {
+	i2c-scl-rising-time-ns = <300>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+};
+
+&i2c3 {
+	i2c-scl-rising-time-ns = <450>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+};
+
+&i2c4 {
+	i2c-scl-rising-time-ns = <600>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+
+	fusb0: typec-portc@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&fusb0_int>;
+		vbus-supply = <&vcc5v0_typec>;
+		status = "okay";
+	};
+};
+
+&i2s0 {
+	rockchip,playback-channels = <8>;
+	rockchip,capture-channels = <8>;
+	status = "okay";
+};
+
+&i2s1 {
+	rockchip,playback-channels = <2>;
+	rockchip,capture-channels = <2>;
+	status = "okay";
+
+	i2s1_p0: port {
+		i2s1_p0_0: endpoint {
+			dai-format = "i2s";
+			mclk-fs = <256>;
+			remote-endpoint = <&es8316_p0_0>;
+		};
+	};
+};
+
+&i2s2 {
+	status = "okay";
+};
+
+&io_domains {
+	status = "okay";
+
+	bt656-supply = <&vcc1v8_dvp>;
+	audio-supply = <&vcc_3v0>;
+	sdmmc-supply = <&vcc_sdio>;
+	gpio1830-supply = <&vcc_3v0>;
+};
+
+&pcie0 {
+	ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
+	num-lanes = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_perst>;
+	vpcie12v-supply = <&vcc12v_dcin>;
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pmu_io_domains {
+	pmu1830-supply = <&vcc_3v0>;
+	status = "okay";
+};
+
+&pinctrl {
+	bt {
+		bt_enable_h: bt-enable-h {
+			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_host_wake_l: bt-host-wake-l {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		bt_wake_l: bt-wake-l {
+			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	buttons {
+		pwrbtn: pwrbtn {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	fusb302x {
+		fusb0_int: fusb0-int {
+			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	leds {
+		work_led_gpio: work_led-gpio {
+			rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		diy_led_gpio: diy_led-gpio {
+			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie {
+		pcie_perst: pcie-perst {
+			rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie_pwr_en: pcie-pwr-en {
+			rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		vsel1_gpio: vsel1-gpio {
+			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		vsel2_gpio: vsel2-gpio {
+			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb-typec {
+		vcc5v0_typec_en: vcc5v0_typec_en {
+			rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb2 {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca1v8_s3>;
+	status = "okay";
+};
+
+&sdio0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	disable-wp;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	max-frequency = <150000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+	};
+};
+
+&tcphy0 {
+	status = "okay";
+};
+
+&tcphy1 {
+	status = "okay";
+};
+
+&tsadc {
+	/* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-mode = <1>;
+	/* tshut polarity 0:LOW 1:HIGH */
+	rockchip,hw-tshut-polarity = <1>;
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+
+	u2phy0_otg: otg-port {
+		status = "okay";
+	};
+
+	u2phy0_host: host-port {
+		phy-supply = <&vcc5v0_host>;
+		status = "okay";
+	};
+};
+
+&u2phy1 {
+	status = "okay";
+
+	u2phy1_otg: otg-port {
+		status = "okay";
+	};
+
+	u2phy1_host: host-port {
+		phy-supply = <&vcc5v0_host>;
+		status = "okay";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rk808 1>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
+		vbat-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc_1v8>;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usbdrd3_0 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	status = "okay";
+	dr_mode = "otg";
+};
+
+&usbdrd3_1 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts
index 808ea77f951d..b4d8f60b7e44 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts
@@ -84,7 +84,7 @@
 	};
 
 	edp_panel: edp-panel {
-		compatible ="lg,lp079qx1-sp0v", "simple-panel";
+		compatible ="lg,lp079qx1-sp0v";
 		backlight = <&backlight>;
 		enable-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index e62ea0e2b657..33cc21fcf4c1 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -291,7 +291,7 @@
 		status = "disabled";
 	};
 
-	sdio0: dwmmc@fe310000 {
+	sdio0: mmc@fe310000 {
 		compatible = "rockchip,rk3399-dw-mshc",
 			     "rockchip,rk3288-dw-mshc";
 		reg = <0x0 0xfe310000 0x0 0x4000>;
@@ -307,7 +307,7 @@
 		status = "disabled";
 	};
 
-	sdmmc: dwmmc@fe320000 {
+	sdmmc: mmc@fe320000 {
 		compatible = "rockchip,rk3399-dw-mshc",
 			     "rockchip,rk3288-dw-mshc";
 		reg = <0x0 0xfe320000 0x0 0x4000>;
@@ -828,6 +828,14 @@
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu_alert0>;
+					cooling-device =
+						<&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 	};
 
@@ -1887,6 +1895,7 @@
 			     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH 0>;
 		interrupt-names = "gpu", "job", "mmu";
 		clocks = <&cru ACLK_GPU>;
+		#cooling-cells = <2>;
 		power-domains = <&power RK3399_PD_GPU>;
 		status = "disabled";
 	};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-rock-pi-n10.dts b/arch/arm64/boot/dts/rockchip/rk3399pro-rock-pi-n10.dts
new file mode 100644
index 000000000000..b42f94179538
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399pro-rock-pi-n10.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2019 Radxa Limited
+ * Copyright (c) 2019 Amarula Solutions(India)
+ */
+
+/dts-v1/;
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+#include "rk3399pro-vmarc-som.dtsi"
+#include <arm/rockchip-radxa-dalang-carrier.dtsi>
+
+/ {
+	model = "Radxa ROCK Pi N10";
+	compatible = "radxa,rockpi-n10", "rockchip,rk3399pro";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
new file mode 100644
index 000000000000..0a516334f15f
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
@@ -0,0 +1,333 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2019 Vamrs Limited
+ * Copyright (c) 2019 Amarula Solutions(India)
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	compatible = "vamrs,rk3399pro-vmarc-som", "rockchip,rk3399pro";
+
+	clkin_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "clkin_gmac";
+		#clock-cells = <0>;
+	};
+
+	vcc12v_dcin: vcc12v-dcin-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_RMII_SRC>;
+	assigned-clock-parents = <&clkin_gmac>;
+	clock_in_out = "input";
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	tx_delay = <0x28>;
+	rx_delay = <0x11>;
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-rising-time-ns = <180>;
+	i2c-scl-falling-time-ns = <30>;
+	status = "okay";
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PC2 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "rk808-clkout1", "rk808-clkout2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc_buck5>;
+		vcc6-supply = <&vcc_buck5>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+
+		regulators {
+			vdd_log: DCDC_REG1 {
+				regulator-name = "vdd_log";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-initial-mode = <0x2>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-name = "vdd_cpu_l";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc3v3_sys: DCDC_REG4 {
+				regulator-name = "vcc3v3_sys";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-initial-mode = <0x2>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_buck5: DCDC_REG5 {
+				regulator-name = "vcc_buck5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2200000>;
+				regulator-max-microvolt = <2200000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2200000>;
+				};
+			};
+
+			vcca_0v9: LDO_REG1 {
+				regulator-name = "vcca_0v9";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8: LDO_REG2 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_0v9: LDO_REG3 {
+				regulator-name = "vcc_0v9";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG4 {
+				regulator-name = "vcca_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1850000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			/*
+			 * As per BSP, but schematic not showing any regulator
+			 * pin for LD05.
+			 */
+			vdd1v5_dvp: LDO_REG5 {
+				regulator-name = "vdd1v5_dvp";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v5: LDO_REG6 {
+				regulator-name = "vcc_1v5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_3v0: LDO_REG7 {
+				regulator-name = "vccio_3v0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG8 {
+				regulator-name = "vccio_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			/*
+			 * As per BSP, but schematic not showing any regulator
+			 * pin for LD09.
+			 */
+			vcc_sd: LDO_REG9 {
+				regulator-name = "vcc_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc5v0_usb2: SWITCH_REG1 {
+				regulator-name = "vcc5v0_usb2";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <5000000>;
+				};
+			};
+
+			vccio_3v3: vcc_lan: SWITCH_REG2 {
+				regulator-name = "vccio_3v3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&io_domains {
+	status = "okay";
+	bt656-supply = <&vcca_1v8>;
+	sdmmc-supply = <&vccio_sd>;
+	gpio1830-supply = <&vccio_3v0>;
+};
+
+&pmu_io_domains {
+	status = "okay";
+	pmu1830-supply = <&vcc_1v8>;
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	non-removable;
+	status = "okay";
+};
+
+&tsadc {
+	status = "okay";
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <1>;
+};
+
+&pinctrl {
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins =
+				<1 RK_PC2 0 &pcfg_pull_up>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi
index 8ec40a0b8b1e..5b18bda9c5a6 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi
@@ -633,7 +633,8 @@
 			pinctrl-0 = <&pinctrl_nand>;
 			clock-names = "nand", "nand_x", "ecc";
 			clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
-			resets = <&sys_rst 2>;
+			reset-names = "nand", "reg";
+			resets = <&sys_rst 2>, <&sys_rst 2>;
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
index b658f2b641e2..f2dc5f695020 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
@@ -937,7 +937,8 @@
 			pinctrl-0 = <&pinctrl_nand>;
 			clock-names = "nand", "nand_x", "ecc";
 			clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
-			resets = <&sys_rst 2>;
+			reset-names = "nand", "reg";
+			resets = <&sys_rst 2>, <&sys_rst 2>;
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
index d6f6cee4d549..73e7e1203b09 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
@@ -795,7 +795,8 @@
 			pinctrl-0 = <&pinctrl_nand>;
 			clock-names = "nand", "nand_x", "ecc";
 			clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
-			resets = <&sys_rst 2>;
+			reset-names = "nand", "reg";
+			resets = <&sys_rst 2>, <&sys_rst 2>;
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/sprd/Makefile b/arch/arm64/boot/dts/sprd/Makefile
index 2bdc23804f40..f4f1f5148cc2 100644
--- a/arch/arm64/boot/dts/sprd/Makefile
+++ b/arch/arm64/boot/dts/sprd/Makefile
@@ -1,3 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0
 dtb-$(CONFIG_ARCH_SPRD) += sc9836-openphone.dtb \
-			sp9860g-1h10.dtb
+			sp9860g-1h10.dtb	\
+			sp9863a-1h10.dtb
diff --git a/arch/arm64/boot/dts/sprd/sc9863a.dtsi b/arch/arm64/boot/dts/sprd/sc9863a.dtsi
new file mode 100644
index 000000000000..cd80756c888d
--- /dev/null
+++ b/arch/arm64/boot/dts/sprd/sc9863a.dtsi
@@ -0,0 +1,523 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Unisoc SC9863A SoC DTS file
+ *
+ * Copyright (C) 2019, Unisoc Inc.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "sharkl3.dtsi"
+
+/ {
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+				core1 {
+					cpu = <&CPU1>;
+				};
+				core2 {
+					cpu = <&CPU2>;
+				};
+				core3 {
+					cpu = <&CPU3>;
+				};
+				core4 {
+					cpu = <&CPU4>;
+				};
+				core5 {
+					cpu = <&CPU5>;
+				};
+				core6 {
+					cpu = <&CPU6>;
+				};
+				core7 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU4: cpu@400 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x400>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU5: cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x500>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU6: cpu@600 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x600>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU7: cpu@700 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x700>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+	};
+
+	idle-states {
+		entry-method = "arm,psci";
+		CORE_PD: core-pd {
+			compatible = "arm,idle-state";
+			entry-latency-us = <4000>;
+			exit-latency-us = <4000>;
+			min-residency-us = <10000>;
+			local-timer-stop;
+			arm,psci-suspend-param = <0x00010000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>, /* Physical Secure PPI */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>, /* Physical Non-Secure PPI */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>, /* Virtual PPI */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>; /* Hipervisor PPI */
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	soc {
+		gic: interrupt-controller@14000000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			redistributor-stride = <0x0 0x20000>;	/* 128KB stride */
+			#redistributor-regions = <1>;
+			interrupt-controller;
+			reg = <0x0 0x14000000 0 0x20000>,	/* GICD */
+			      <0x0 0x14040000 0 0x100000>;	/* GICR */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		funnel@10001000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x10001000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel_soc_out_port: endpoint {
+						remote-endpoint = <&etb_in>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					funnel_soc_in_port: endpoint {
+						remote-endpoint =
+						<&funnel_ca55_out_port>;
+					};
+				};
+			};
+		};
+
+		etb@10003000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x10003000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					etb_in: endpoint {
+						remote-endpoint =
+						<&funnel_soc_out_port>;
+					};
+				};
+			};
+		};
+
+		funnel@12001000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x12001000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel_little_out_port: endpoint {
+						remote-endpoint =
+						<&etf_little_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					funnel_little_in_port0: endpoint {
+						remote-endpoint = <&etm0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					funnel_little_in_port1: endpoint {
+						remote-endpoint = <&etm1_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					funnel_little_in_port2: endpoint {
+						remote-endpoint = <&etm2_out>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					funnel_little_in_port3: endpoint {
+						remote-endpoint = <&etm3_out>;
+					};
+				};
+			};
+		};
+
+		etf@12002000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x12002000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etf_little_out: endpoint {
+						remote-endpoint =
+						<&funnel_ca55_in_port0>;
+					};
+				};
+			};
+
+			in-port {
+				port {
+					etf_little_in: endpoint {
+						remote-endpoint =
+						<&funnel_little_out_port>;
+					};
+				};
+			};
+		};
+
+		etf@12003000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x12003000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etf_big_out: endpoint {
+						remote-endpoint =
+						<&funnel_ca55_in_port1>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					etf_big_in: endpoint {
+						remote-endpoint =
+						<&funnel_big_out_port>;
+					};
+				};
+			};
+		};
+
+		funnel@12004000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x12004000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel_ca55_out_port: endpoint {
+						remote-endpoint =
+						<&funnel_soc_in_port>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					funnel_ca55_in_port0: endpoint {
+						remote-endpoint =
+						<&etf_little_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					funnel_ca55_in_port1: endpoint {
+						remote-endpoint =
+						<&etf_big_out>;
+					};
+				};
+			};
+		};
+
+		funnel@12005000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x12005000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel_big_out_port: endpoint {
+						remote-endpoint =
+						<&etf_big_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					funnel_big_in_port0: endpoint {
+						remote-endpoint = <&etm4_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					funnel_big_in_port1: endpoint {
+						remote-endpoint = <&etm5_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					funnel_big_in_port2: endpoint {
+						remote-endpoint = <&etm6_out>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					funnel_big_in_port3: endpoint {
+						remote-endpoint = <&etm7_out>;
+					};
+				};
+			};
+		};
+
+		etm@13040000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x13040000 0 0x1000>;
+			cpu = <&CPU0>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm0_out: endpoint {
+						remote-endpoint =
+						<&funnel_little_in_port0>;
+					};
+				};
+			};
+		};
+
+		etm@13140000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x13140000 0 0x1000>;
+			cpu = <&CPU1>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm1_out: endpoint {
+						remote-endpoint =
+						<&funnel_little_in_port1>;
+					};
+				};
+			};
+		};
+
+		etm@13240000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x13240000 0 0x1000>;
+			cpu = <&CPU2>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm2_out: endpoint {
+						remote-endpoint =
+						<&funnel_little_in_port2>;
+					};
+				};
+			};
+		};
+
+		etm@13340000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x13340000 0 0x1000>;
+			cpu = <&CPU3>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm3_out: endpoint {
+						remote-endpoint =
+						<&funnel_little_in_port3>;
+					};
+				};
+			};
+		};
+
+		etm@13440000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x13440000 0 0x1000>;
+			cpu = <&CPU4>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm4_out: endpoint {
+						remote-endpoint =
+						<&funnel_big_in_port0>;
+					};
+				};
+			};
+		};
+
+		etm@13540000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x13540000 0 0x1000>;
+			cpu = <&CPU5>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm5_out: endpoint {
+						remote-endpoint =
+						<&funnel_big_in_port1>;
+					};
+				};
+			};
+		};
+
+		etm@13640000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x13640000 0 0x1000>;
+			cpu = <&CPU6>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm6_out: endpoint {
+						remote-endpoint =
+						<&funnel_big_in_port2>;
+					};
+				};
+			};
+		};
+
+		etm@13740000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x13740000 0 0x1000>;
+			cpu = <&CPU7>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm7_out: endpoint {
+						remote-endpoint =
+						<&funnel_big_in_port3>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/sprd/sharkl3.dtsi b/arch/arm64/boot/dts/sprd/sharkl3.dtsi
new file mode 100644
index 000000000000..0222128b10f7
--- /dev/null
+++ b/arch/arm64/boot/dts/sprd/sharkl3.dtsi
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Unisoc Sharkl3 platform DTS file
+ *
+ * Copyright (C) 2019, Unisoc Inc.
+ */
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		apb@70000000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x0 0x70000000 0x10000000>;
+
+			uart0: serial@0 {
+				compatible = "sprd,sc9863a-uart",
+					     "sprd,sc9836-uart";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ext_26m>;
+				status = "disabled";
+			};
+
+			uart1: serial@100000 {
+				compatible = "sprd,sc9863a-uart",
+					     "sprd,sc9836-uart";
+				reg = <0x100000 0x100>;
+				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ext_26m>;
+				status = "disabled";
+			};
+
+			uart2: serial@200000 {
+				compatible = "sprd,sc9863a-uart",
+					     "sprd,sc9836-uart";
+				reg = <0x200000 0x100>;
+				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ext_26m>;
+				status = "disabled";
+			};
+
+			uart3: serial@300000 {
+				compatible = "sprd,sc9863a-uart",
+					     "sprd,sc9836-uart";
+				reg = <0x300000 0x100>;
+				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ext_26m>;
+				status = "disabled";
+			};
+
+			uart4: serial@400000 {
+				compatible = "sprd,sc9863a-uart",
+					     "sprd,sc9836-uart";
+				reg = <0x400000 0x100>;
+				interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ext_26m>;
+				status = "disabled";
+			};
+		};
+	};
+
+	ext_26m: ext-26m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "ext-26m";
+	};
+};
diff --git a/arch/arm64/boot/dts/sprd/sp9863a-1h10.dts b/arch/arm64/boot/dts/sprd/sp9863a-1h10.dts
new file mode 100644
index 000000000000..5c32c1596337
--- /dev/null
+++ b/arch/arm64/boot/dts/sprd/sp9863a-1h10.dts
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Unisoc SP9863A-1h10 boards DTS file
+ *
+ * Copyright (C) 2019, Unisoc Inc.
+ */
+
+/dts-v1/;
+
+#include "sc9863a.dtsi"
+
+/ {
+	model = "Spreadtrum SP9863A-1H10 Board";
+
+	compatible = "sprd,sp9863a-1h10", "sprd,sc9863a";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x80000000>;
+	};
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+		bootargs = "earlycon";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index efb24579922c..e5df20a2d2f9 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -51,17 +51,6 @@
 		};
 	};
 
-	secure_proxy_main: mailbox@32c00000 {
-		compatible = "ti,am654-secure-proxy";
-		#mbox-cells = <1>;
-		reg-names = "target_data", "rt", "scfg";
-		reg = <0x00 0x32c00000 0x00 0x100000>,
-		      <0x00 0x32400000 0x00 0x100000>,
-		      <0x00 0x32800000 0x00 0x100000>;
-		interrupt-names = "rx_011";
-		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
 	serdes0: serdes@900000 {
 		compatible = "ti,phy-am654-serdes";
 		reg = <0x0 0x900000 0x0 0x2000>;
@@ -385,11 +374,15 @@
 		ti,sci-rm-range-girq = <0x1>;
 	};
 
-	cbass_main_navss: interconnect0 {
-		compatible = "simple-bus";
+	main_navss {
+		compatible = "simple-mfd";
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
+		dma-coherent;
+		dma-ranges;
+
+		ti,sci-dev-id = <118>;
 
 		intr_main_navss: interrupt-controller1 {
 			compatible = "ti,sci-intr";
@@ -414,6 +407,17 @@
 			ti,sci-rm-range-global-event = <0x1>;
 		};
 
+		secure_proxy_main: mailbox@32c00000 {
+			compatible = "ti,am654-secure-proxy";
+			#mbox-cells = <1>;
+			reg-names = "target_data", "rt", "scfg";
+			reg = <0x00 0x32c00000 0x00 0x100000>,
+			      <0x00 0x32400000 0x00 0x100000>,
+			      <0x00 0x32800000 0x00 0x100000>;
+			interrupt-names = "rx_011";
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		hwspinlock: spinlock@30e00000 {
 			compatible = "ti,am654-hwspinlock";
 			reg = <0x00 0x30e00000 0x00 0x1000>;
@@ -527,6 +531,41 @@
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&intr_main_navss>;
 		};
+
+		ringacc: ringacc@3c000000 {
+			compatible = "ti,am654-navss-ringacc";
+			reg =	<0x0 0x3c000000 0x0 0x400000>,
+				<0x0 0x38000000 0x0 0x400000>,
+				<0x0 0x31120000 0x0 0x100>,
+				<0x0 0x33000000 0x0 0x40000>;
+			reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target";
+			ti,num-rings = <818>;
+			ti,sci-rm-range-gp-rings = <0x2>; /* GP ring range */
+			ti,dma-ring-reset-quirk;
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <187>;
+			msi-parent = <&inta_main_udmass>;
+		};
+
+		main_udmap: dma-controller@31150000 {
+			compatible = "ti,am654-navss-main-udmap";
+			reg =	<0x0 0x31150000 0x0 0x100>,
+				<0x0 0x34000000 0x0 0x100000>,
+				<0x0 0x35000000 0x0 0x100000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt";
+			msi-parent = <&inta_main_udmass>;
+			#dma-cells = <1>;
+
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <188>;
+			ti,ringacc = <&ringacc>;
+
+			ti,sci-rm-range-tchan = <0x1>, /* TX_HCHAN */
+						<0x2>; /* TX_CHAN */
+			ti,sci-rm-range-rchan = <0x4>, /* RX_HCHAN */
+						<0x5>; /* RX_CHAN */
+			ti,sci-rm-range-rflow = <0x6>; /* GP RFLOW */
+		};
 	};
 
 	main_gpio0:  main_gpio0@600000 {
@@ -624,4 +663,83 @@
 		dma-coherent;
 		interrupts = <GIC_SPI 355 IRQ_TYPE_EDGE_RISING>;
 	};
+
+	mcasp0: mcasp@2b00000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b00000 0x0 0x2000>,
+			<0x0 0x02b08000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc400>, <&main_udmap 0x4400>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 104 0>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>;
+
+		status = "disabled";
+	};
+
+	mcasp1: mcasp@2b10000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b10000 0x0 0x2000>,
+			<0x0 0x02b18000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc401>, <&main_udmap 0x4401>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 105 0>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>;
+
+		status = "disabled";
+	};
+
+	mcasp2: mcasp@2b20000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b20000 0x0 0x2000>,
+			<0x0 0x02b28000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc402>, <&main_udmap 0x4402>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 106 0>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 106 TI_SCI_PD_EXCLUSIVE>;
+
+		status = "disabled";
+	};
+
+	cal: cal@6f03000 {
+		compatible = "ti,am654-cal";
+		reg = <0x0 0x06f03000 0x0 0x400>,
+		      <0x0 0x06f03800 0x0 0x40>;
+		reg-names = "cal_top",
+			    "cal_rx_core0";
+		interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+		ti,camerrx-control = <&scm_conf 0x40c0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 2 0>;
+		power-domains = <&k3_pds 2 TI_SCI_PD_EXCLUSIVE>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			csi2_0: port@0 {
+				reg = <0>;
+			};
+		};
+	};
 };
diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
index 7bdf5342f58f..92629cbdc184 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
@@ -6,6 +6,14 @@
  */
 
 &cbass_mcu {
+	mcu_conf: scm_conf@40f00000 {
+		compatible = "syscon", "simple-mfd";
+		reg = <0x0 0x40f00000 0x0 0x20000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x40f00000 0x20000>;
+	};
+
 	mcu_uart0: serial@40a00000 {
 		compatible = "ti,am654-uart";
 			reg = <0x00 0x40a00000 0x00 0x100>;
@@ -95,4 +103,88 @@
 			compatible = "ti,am654-adc", "ti,am3359-adc";
 		};
 	};
+
+	mcu_navss {
+		compatible = "simple-mfd";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		dma-coherent;
+		dma-ranges;
+
+		ti,sci-dev-id = <119>;
+
+		mcu_ringacc: ringacc@2b800000 {
+			compatible = "ti,am654-navss-ringacc";
+			reg =	<0x0 0x2b800000 0x0 0x400000>,
+				<0x0 0x2b000000 0x0 0x400000>,
+				<0x0 0x28590000 0x0 0x100>,
+				<0x0 0x2a500000 0x0 0x40000>;
+			reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target";
+			ti,num-rings = <286>;
+			ti,sci-rm-range-gp-rings = <0x2>; /* GP ring range */
+			ti,dma-ring-reset-quirk;
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <195>;
+			msi-parent = <&inta_main_udmass>;
+		};
+
+		mcu_udmap: dma-controller@285c0000 {
+			compatible = "ti,am654-navss-mcu-udmap";
+			reg =	<0x0 0x285c0000 0x0 0x100>,
+				<0x0 0x2a800000 0x0 0x40000>,
+				<0x0 0x2aa00000 0x0 0x40000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt";
+			msi-parent = <&inta_main_udmass>;
+			#dma-cells = <1>;
+
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <194>;
+			ti,ringacc = <&mcu_ringacc>;
+
+			ti,sci-rm-range-tchan = <0x1>, /* TX_HCHAN */
+						<0x2>; /* TX_CHAN */
+			ti,sci-rm-range-rchan = <0x3>, /* RX_HCHAN */
+						<0x4>; /* RX_CHAN */
+			ti,sci-rm-range-rflow = <0x5>; /* GP RFLOW */
+		};
+	};
+
+	fss: fss@47000000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ospi0: spi@47040000 {
+			compatible = "ti,am654-ospi", "cdns,qspi-nor";
+			reg = <0x0 0x47040000 0x0 0x100>,
+				<0x5 0x00000000 0x1 0x0000000>;
+			interrupts = <GIC_SPI 552 IRQ_TYPE_LEVEL_HIGH>;
+			cdns,fifo-depth = <256>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x0>;
+			clocks = <&k3_clks 248 0>;
+			assigned-clocks = <&k3_clks 248 0>;
+			assigned-clock-parents = <&k3_clks 248 2>;
+			assigned-clock-rates = <166666666>;
+			power-domains = <&k3_pds 248 TI_SCI_PD_EXCLUSIVE>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		ospi1: spi@47050000 {
+			compatible = "ti,am654-ospi", "cdns,qspi-nor";
+			reg = <0x0 0x47050000 0x0 0x100>,
+				<0x7 0x00000000 0x1 0x00000000>;
+			interrupts = <GIC_SPI 553 IRQ_TYPE_LEVEL_HIGH>;
+			cdns,fifo-depth = <256>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x0>;
+			clocks = <&k3_clks 249 6>;
+			power-domains = <&k3_pds 249 TI_SCI_PD_EXCLUSIVE>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
 };
diff --git a/arch/arm64/boot/dts/ti/k3-am65.dtsi b/arch/arm64/boot/dts/ti/k3-am65.dtsi
index 6dfccd5d56c8..aea36e29dd32 100644
--- a/arch/arm64/boot/dts/ti/k3-am65.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65.dtsi
@@ -74,13 +74,18 @@
 			 /* MCUSS Range */
 			 <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>,
 			 <0x00 0x40200000 0x00 0x40200000 0x00 0x00900100>,
+			 <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, /* CTRL_MMR0 */
 			 <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>,
 			 <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>,
 			 <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00080000>,
 			 <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>,
 			 <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>,
 			 <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>,
-			 <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>;
+			 <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>,
+			 <0x00 0x50000000 0x00 0x50000000 0x00 0x8000000>,
+			 <0x00 0x70000000 0x00 0x70000000 0x00 0x200000>,
+			 <0x05 0x00000000 0x05 0x00000000 0x01 0x0000000>,
+			 <0x07 0x00000000 0x07 0x00000000 0x01 0x0000000>;
 
 		cbass_mcu: interconnect@28380000 {
 			compatible = "simple-bus";
@@ -88,13 +93,17 @@
 			#size-cells = <2>;
 			ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, /* MCU NAVSS*/
 				 <0x00 0x40200000 0x00 0x40200000 0x00 0x00900100>, /* First peripheral window */
+				 <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, /* CTRL_MMR0 */
 				 <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, /* MCU R5F Core0 */
 				 <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, /* MCU R5F Core1 */
 				 <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00080000>, /* MCU SRAM */
 				 <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, /* WKUP */
 				 <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */
 				 <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */
-				 <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>; /* OSPI space 1 */
+				 <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, /* OSPI space 1 */
+				 <0x00 0x50000000 0x00 0x50000000 0x00 0x8000000>, /*  FSS OSPI0 data region 1 */
+				 <0x05 0x00000000 0x05 0x00000000 0x01 0x0000000>, /* FSS OSPI0 data region 3*/
+				 <0x07 0x00000000 0x07 0x00000000 0x01 0x0000000>; /* FSS OSPI1 data region 3*/
 
 			cbass_wakeup: interconnect@42040000 {
 				compatible = "simple-bus";
diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
index 8a85b482ad31..1700996800eb 100644
--- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
@@ -53,6 +53,12 @@
 			gpios = <&wkup_gpio0 27 GPIO_ACTIVE_LOW>;
 		};
 	};
+
+	clk_ov5640_fixed: clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
 };
 
 &wkup_pmx0 {
@@ -69,6 +75,29 @@
 			AM65X_WKUP_IOPAD(0x003c, PIN_INPUT, 7) /* (P2) WKUP_GPIO0_27 */
 		>;
 	};
+
+	mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins_default {
+		pinctrl-single,pins = <
+			AM65X_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* (V1) MCU_OSPI0_CLK */
+			AM65X_WKUP_IOPAD(0x0008, PIN_INPUT, 0)	 /* (U2) MCU_OSPI0_DQS */
+			AM65X_WKUP_IOPAD(0x000c, PIN_INPUT, 0)  /* (U4) MCU_OSPI0_D0 */
+			AM65X_WKUP_IOPAD(0x0010, PIN_INPUT, 0)  /* (U5) MCU_OSPI0_D1 */
+			AM65X_WKUP_IOPAD(0x0014, PIN_INPUT, 0)  /* (T2) MCU_OSPI0_D2 */
+			AM65X_WKUP_IOPAD(0x0018, PIN_INPUT, 0)  /* (T3) MCU_OSPI0_D3 */
+			AM65X_WKUP_IOPAD(0x001c, PIN_INPUT, 0)  /* (T4) MCU_OSPI0_D4 */
+			AM65X_WKUP_IOPAD(0x0020, PIN_INPUT, 0)  /* (T5) MCU_OSPI0_D5 */
+			AM65X_WKUP_IOPAD(0x0024, PIN_INPUT, 0)  /* (R2) MCU_OSPI0_D6 */
+			AM65X_WKUP_IOPAD(0x0028, PIN_INPUT, 0)  /* (R3) MCU_OSPI0_D7 */
+			AM65X_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0) /* (R4) MCU_OSPI0_CSn0 */
+		>;
+	};
+
+	wkup_pca554_default: wkup_pca554_default {
+		pinctrl-single,pins = <
+			AM65X_WKUP_IOPAD(0x0034, PIN_INPUT, 7) /* (T1) MCU_OSPI1_CLK.WKUP_GPIO0_25 */
+
+		>;
+	};
 };
 
 &main_pmx0 {
@@ -164,6 +193,12 @@
 		reg = <0x39>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wkup_pca554_default>;
+		interrupt-parent = <&wkup_gpio0>;
+		interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
 	};
 };
 
@@ -184,6 +219,23 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c1_pins_default>;
 	clock-frequency = <400000>;
+
+	ov5640@3c {
+		compatible = "ovti,ov5640";
+		reg = <0x3c>;
+
+		clocks = <&clk_ov5640_fixed>;
+		clock-names = "xclk";
+
+		port {
+			csi2_cam0: endpoint {
+				remote-endpoint = <&csi2_phy0>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+
 };
 
 &main_i2c2 {
@@ -339,3 +391,31 @@
 &mailbox0_cluster11 {
 	status = "disabled";
 };
+
+&ospi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
+
+	flash@0{
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <8>;
+		spi-max-frequency = <40000000>;
+		cdns,tshsl-ns = <60>;
+		cdns,tsd2d-ns = <60>;
+		cdns,tchsh-ns = <60>;
+		cdns,tslch-ns = <60>;
+		cdns,read-delay = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&csi2_0 {
+	csi2_phy0: endpoint {
+		remote-endpoint = <&csi2_cam0>;
+		clock-lanes = <0>;
+		data-lanes = <1 2>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
index 2a3cd6174504..7a5c3d4adadd 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
@@ -67,6 +67,46 @@
 			J721E_IOPAD(0x214, PIN_OUTPUT, 4) /* (V4) MCAN1_TX.USB1_DRVVBUS */
 		>;
 	};
+
+	main_i2c1_exp4_pins_default: main-i2c1-exp4-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x230, PIN_INPUT, 7) /* (U2) ECAP0_IN_APWM_OUT.GPIO1_11 */
+		>;
+	};
+
+	main_i2c0_pins_default: main-i2c0-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x220, PIN_INPUT_PULLUP, 0) /* (AC5) I2C0_SCL */
+			J721E_IOPAD(0x224, PIN_INPUT_PULLUP, 0) /* (AA5) I2C0_SDA */
+		>;
+	};
+
+	main_i2c1_pins_default: main-i2c1-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x228, PIN_INPUT_PULLUP, 0) /* (Y6) I2C1_SCL */
+			J721E_IOPAD(0x22c, PIN_INPUT_PULLUP, 0) /* (AA6) I2C1_SDA */
+		>;
+	};
+
+	main_i2c3_pins_default: main-i2c3-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x270, PIN_INPUT_PULLUP, 4) /* (T26) MMC2_CLK.I2C3_SCL */
+			J721E_IOPAD(0x274, PIN_INPUT_PULLUP, 4) /* (T25) MMC2_CMD.I2C3_SDA */
+		>;
+	};
+
+	main_i2c6_pins_default: main-i2c6-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x1d0, PIN_INPUT_PULLUP, 2) /* (AA3) SPI0_D1.I2C6_SCL */
+			J721E_IOPAD(0x1e4, PIN_INPUT_PULLUP, 2) /* (Y2) SPI1_D1.I2C6_SDA */
+		>;
+	};
+
+	main_i2c1_exp4_pins_default: main-i2c1-exp4-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x230, PIN_INPUT, 7) /* (U2) ECAP0_IN_APWM_OUT.GPIO1_11 */
+		 >;
+	};
 };
 
 &wkup_pmx0 {
@@ -75,6 +115,19 @@
 			J721E_WKUP_IOPAD(0xcc, PIN_INPUT, 7) /* (G28) WKUP_GPIO0_7 */
 		>;
 	};
+
+	mcu_fss0_ospi1_pins_default: mcu-fss0-ospi1-pins-default {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x34, PIN_OUTPUT, 0) /* (F22) MCU_OSPI1_CLK */
+			J721E_WKUP_IOPAD(0x50, PIN_OUTPUT, 0) /* (C22) MCU_OSPI1_CSn0 */
+			J721E_WKUP_IOPAD(0x40, PIN_INPUT, 0) /* (D22) MCU_OSPI1_D0 */
+			J721E_WKUP_IOPAD(0x44, PIN_INPUT, 0) /* (G22) MCU_OSPI1_D1 */
+			J721E_WKUP_IOPAD(0x48, PIN_INPUT, 0) /* (D23) MCU_OSPI1_D2 */
+			J721E_WKUP_IOPAD(0x4c, PIN_INPUT, 0) /* (C23) MCU_OSPI1_D3 */
+			J721E_WKUP_IOPAD(0x3c, PIN_INPUT, 0) /* (B23) MCU_OSPI1_DQS */
+			J721E_WKUP_IOPAD(0x38, PIN_INPUT, 0) /* (A23) MCU_OSPI1_LBCLKO */
+		>;
+	};
 };
 
 &wkup_uart0 {
@@ -279,3 +332,100 @@
 	dr_mode = "host";
 	maximum-speed = "high-speed";
 };
+
+&ospi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_fss0_ospi1_pins_default>;
+
+	flash@0{
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <40000000>;
+		cdns,tshsl-ns = <60>;
+		cdns,tsd2d-ns = <60>;
+		cdns,tchsh-ns = <60>;
+		cdns,tslch-ns = <60>;
+		cdns,read-delay = <2>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&tscadc0 {
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6 7>;
+	};
+};
+
+&tscadc1 {
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6 7>;
+	};
+};
+
+&main_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c0_pins_default>;
+	clock-frequency = <400000>;
+
+	exp1: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	exp2: gpio@22 {
+		compatible = "ti,tca6424";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&main_i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c1_pins_default>;
+	clock-frequency = <400000>;
+
+	exp4: gpio@20 {
+		compatible = "ti,tca6408";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&main_i2c1_exp4_pins_default>;
+		interrupt-parent = <&main_gpio1>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&main_i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c3_pins_default>;
+	clock-frequency = <400000>;
+
+	exp3: gpio@20 {
+		compatible = "ti,tca6408";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&main_i2c6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c6_pins_default>;
+	clock-frequency = <400000>;
+
+	exp5: gpio@20 {
+		compatible = "ti,tca6408";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index 1e4c2b78d66d..0b9d14b838a1 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -40,16 +40,6 @@
 		};
 	};
 
-	smmu0: smmu@36600000 {
-		compatible = "arm,smmu-v3";
-		reg = <0x0 0x36600000 0x0 0x100000>;
-		interrupt-parent = <&gic500>;
-		interrupts = <GIC_SPI 772 IRQ_TYPE_EDGE_RISING>,
-			     <GIC_SPI 768 IRQ_TYPE_EDGE_RISING>;
-		interrupt-names = "eventq", "gerror";
-		#iommu-cells = <1>;
-	};
-
 	main_gpio_intr: interrupt-controller0 {
 		compatible = "ti,sci-intr";
 		ti,intr-trigger-type = <1>;
@@ -61,11 +51,15 @@
 		ti,sci-rm-range-girq = <0x1>;
 	};
 
-	cbass_main_navss: interconnect0 {
-		compatible = "simple-bus";
+	main_navss {
+		compatible = "simple-mfd";
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
+		dma-coherent;
+		dma-ranges;
+
+		ti,sci-dev-id = <199>;
 
 		main_navss_intr: interrupt-controller1 {
 			compatible = "ti,sci-intr";
@@ -90,6 +84,27 @@
 			ti,sci-rm-range-global-event = <0xd>;
 		};
 
+		secure_proxy_main: mailbox@32c00000 {
+			compatible = "ti,am654-secure-proxy";
+			#mbox-cells = <1>;
+			reg-names = "target_data", "rt", "scfg";
+			reg = <0x00 0x32c00000 0x00 0x100000>,
+			      <0x00 0x32400000 0x00 0x100000>,
+			      <0x00 0x32800000 0x00 0x100000>;
+			interrupt-names = "rx_011";
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		smmu0: smmu@36600000 {
+			compatible = "arm,smmu-v3";
+			reg = <0x0 0x36600000 0x0 0x100000>;
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 772 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 768 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "eventq", "gerror";
+			#iommu-cells = <1>;
+		};
+
 		hwspinlock: spinlock@30e00000 {
 			compatible = "ti,am654-hwspinlock";
 			reg = <0x00 0x30e00000 0x00 0x1000>;
@@ -203,17 +218,42 @@
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
 		};
-	};
 
-	secure_proxy_main: mailbox@32c00000 {
-		compatible = "ti,am654-secure-proxy";
-		#mbox-cells = <1>;
-		reg-names = "target_data", "rt", "scfg";
-		reg = <0x00 0x32c00000 0x00 0x100000>,
-		      <0x00 0x32400000 0x00 0x100000>,
-		      <0x00 0x32800000 0x00 0x100000>;
-		interrupt-names = "rx_011";
-		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		main_ringacc: ringacc@3c000000 {
+			compatible = "ti,am654-navss-ringacc";
+			reg =	<0x0 0x3c000000 0x0 0x400000>,
+				<0x0 0x38000000 0x0 0x400000>,
+				<0x0 0x31120000 0x0 0x100>,
+				<0x0 0x33000000 0x0 0x40000>;
+			reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target";
+			ti,num-rings = <1024>;
+			ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <211>;
+			msi-parent = <&main_udmass_inta>;
+		};
+
+		main_udmap: dma-controller@31150000 {
+			compatible = "ti,j721e-navss-main-udmap";
+			reg =	<0x0 0x31150000 0x0 0x100>,
+				<0x0 0x34000000 0x0 0x100000>,
+				<0x0 0x35000000 0x0 0x100000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt";
+			msi-parent = <&main_udmass_inta>;
+			#dma-cells = <1>;
+
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <212>;
+			ti,ringacc = <&main_ringacc>;
+
+			ti,sci-rm-range-tchan = <0x0d>, /* TX_CHAN */
+						<0x0f>, /* TX_HCHAN */
+						<0x10>; /* TX_UHCHAN */
+			ti,sci-rm-range-rchan = <0x0a>, /* RX_CHAN */
+						<0x0b>, /* RX_HCHAN */
+						<0x0c>; /* RX_UHCHAN */
+			ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */
+		};
 	};
 
 	main_pmx0: pinmux@11c000 {
@@ -596,4 +636,331 @@
 			dr_mode = "otg";
 		};
 	};
+
+	main_i2c0: i2c@2000000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x2000000 0x0 0x100>;
+		interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 187 0>;
+		power-domains = <&k3_pds 187 TI_SCI_PD_SHARED>;
+	};
+
+	main_i2c1: i2c@2010000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x2010000 0x0 0x100>;
+		interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 188 0>;
+		power-domains = <&k3_pds 188 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	main_i2c2: i2c@2020000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x2020000 0x0 0x100>;
+		interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 189 0>;
+		power-domains = <&k3_pds 189 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	main_i2c3: i2c@2030000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x2030000 0x0 0x100>;
+		interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 190 0>;
+		power-domains = <&k3_pds 190 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	main_i2c4: i2c@2040000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x2040000 0x0 0x100>;
+		interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 191 0>;
+		power-domains = <&k3_pds 191 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	main_i2c5: i2c@2050000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x2050000 0x0 0x100>;
+		interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 192 0>;
+		power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	main_i2c6: i2c@2060000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x2060000 0x0 0x100>;
+		interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 193 0>;
+		power-domains = <&k3_pds 193 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	ufs_wrapper: ufs-wrapper@4e80000 {
+		compatible = "ti,j721e-ufs";
+		reg = <0x0 0x4e80000 0x0 0x100>;
+		power-domains = <&k3_pds 277 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 277 1>;
+		assigned-clocks = <&k3_clks 277 1>;
+		assigned-clock-parents = <&k3_clks 277 4>;
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		ufs@4e84000 {
+			compatible = "cdns,ufshc-m31-16nm", "jedec,ufs-2.0";
+			reg = <0x0 0x4e84000 0x0 0x10000>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			freq-table-hz = <250000000 250000000>, <19200000 19200000>, <19200000 19200000>;
+			clocks = <&k3_clks 277 0>, <&k3_clks 277 1>, <&k3_clks 277 1>;
+			clock-names = "core_clk", "phy_clk", "ref_clk";
+			dma-coherent;
+		};
+	};
+
+	mcasp0: mcasp@2b00000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b00000 0x0 0x2000>,
+			<0x0 0x02b08000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 544 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 545 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc400>, <&main_udmap 0x4400>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 174 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 174 TI_SCI_PD_EXCLUSIVE>;
+
+		status = "disabled";
+	};
+
+	mcasp1: mcasp@2b10000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b10000 0x0 0x2000>,
+			<0x0 0x02b18000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 546 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 547 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc401>, <&main_udmap 0x4401>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 175 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 175 TI_SCI_PD_EXCLUSIVE>;
+
+		status = "disabled";
+	};
+
+	mcasp2: mcasp@2b20000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b20000 0x0 0x2000>,
+			<0x0 0x02b28000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 548 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 549 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc402>, <&main_udmap 0x4402>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 176 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 176 TI_SCI_PD_EXCLUSIVE>;
+
+		status = "disabled";
+	};
+
+	mcasp3: mcasp@2b30000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b30000 0x0 0x2000>,
+			<0x0 0x02b38000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 550 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc500>, <&main_udmap 0x4500>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 177 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 177 TI_SCI_PD_EXCLUSIVE>;
+
+		status = "disabled";
+	};
+
+	mcasp4: mcasp@2b40000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b40000 0x0 0x2000>,
+			<0x0 0x02b48000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 552 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 553 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc501>, <&main_udmap 0x4501>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 178 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 178 TI_SCI_PD_EXCLUSIVE>;
+
+		status = "disabled";
+	};
+
+	mcasp5: mcasp@2b50000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b50000 0x0 0x2000>,
+			<0x0 0x02b58000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 554 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 555 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc502>, <&main_udmap 0x4502>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 179 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 179 TI_SCI_PD_EXCLUSIVE>;
+
+		status = "disabled";
+	};
+
+	mcasp6: mcasp@2b60000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b60000 0x0 0x2000>,
+			<0x0 0x02b68000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 556 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 557 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc503>, <&main_udmap 0x4503>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 180 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 180 TI_SCI_PD_EXCLUSIVE>;
+
+		status = "disabled";
+	};
+
+	mcasp7: mcasp@2b70000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b70000 0x0 0x2000>,
+			<0x0 0x02b78000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 558 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 559 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc504>, <&main_udmap 0x4504>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 181 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 181 TI_SCI_PD_EXCLUSIVE>;
+
+		status = "disabled";
+	};
+
+	mcasp8: mcasp@2b80000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b80000 0x0 0x2000>,
+			<0x0 0x02b88000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 560 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 561 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc505>, <&main_udmap 0x4505>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 182 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>;
+
+		status = "disabled";
+	};
+
+	mcasp9: mcasp@2b90000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b90000 0x0 0x2000>,
+			<0x0 0x02b98000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 562 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 563 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc506>, <&main_udmap 0x4506>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 183 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 183 TI_SCI_PD_EXCLUSIVE>;
+
+		status = "disabled";
+	};
+
+	mcasp10: mcasp@2ba0000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02ba0000 0x0 0x2000>,
+			<0x0 0x02ba8000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 564 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 565 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc507>, <&main_udmap 0x4507>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 184 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 184 TI_SCI_PD_EXCLUSIVE>;
+
+		status = "disabled";
+	};
+
+	mcasp11: mcasp@2bb0000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02bb0000 0x0 0x2000>,
+			<0x0 0x02bb8000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 566 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 567 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc508>, <&main_udmap 0x4508>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 185 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 185 TI_SCI_PD_EXCLUSIVE>;
+
+		status = "disabled";
+	};
 };
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
index 555dc7b7aedc..16c874bfd49a 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
@@ -121,4 +121,153 @@
 		clocks = <&k3_clks 114 0>;
 		clock-names = "gpio";
 	};
+
+	mcu_i2c0: i2c@40b00000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x40b00000 0x0 0x100>;
+		interrupts = <GIC_SPI 852 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 194 0>;
+		power-domains = <&k3_pds 194 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	mcu_i2c1: i2c@40b10000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x40b10000 0x0 0x100>;
+		interrupts = <GIC_SPI 853 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 195 0>;
+		power-domains = <&k3_pds 195 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	wkup_i2c0: i2c@42120000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x42120000 0x0 0x100>;
+		interrupts = <GIC_SPI 896 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 197 0>;
+		power-domains = <&k3_pds 197 TI_SCI_PD_SHARED>;
+	};
+
+	fss: fss@47000000 {
+		compatible = "simple-bus";
+		reg = <0x0 0x47000000 0x0 0x100>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ospi0: spi@47040000 {
+			compatible = "ti,am654-ospi";
+			reg = <0x0 0x47040000 0x0 0x100>,
+				<0x5 0x00000000 0x1 0x0000000>;
+			interrupts = <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>;
+			cdns,fifo-depth = <256>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x0>;
+			clocks = <&k3_clks 103 0>;
+			assigned-clocks = <&k3_clks 103 0>;
+			assigned-clock-parents = <&k3_clks 103 2>;
+			assigned-clock-rates = <166666666>;
+			power-domains = <&k3_pds 103 TI_SCI_PD_EXCLUSIVE>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		ospi1: spi@47050000 {
+			compatible = "ti,am654-ospi";
+			reg = <0x0 0x47050000 0x0 0x100>,
+				<0x7 0x00000000 0x1 0x00000000>;
+			interrupts = <GIC_SPI 841 IRQ_TYPE_LEVEL_HIGH>;
+			cdns,fifo-depth = <256>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x0>;
+			clocks = <&k3_clks 104 0>;
+			power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	tscadc0: tscadc@40200000 {
+		compatible = "ti,am3359-tscadc";
+		reg = <0x0 0x40200000 0x0 0x1000>;
+		interrupts = <GIC_SPI 860 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 0 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 0 1>;
+		assigned-clocks = <&k3_clks 0 3>;
+		assigned-clock-rates = <60000000>;
+		clock-names = "adc_tsc_fck";
+
+		adc {
+			#io-channel-cells = <1>;
+			compatible = "ti,am3359-adc";
+		};
+	};
+
+	tscadc1: tscadc@40210000 {
+		compatible = "ti,am3359-tscadc";
+		reg = <0x0 0x40210000 0x0 0x1000>;
+		interrupts = <GIC_SPI 861 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 1 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 1 1>;
+		assigned-clocks = <&k3_clks 1 3>;
+		assigned-clock-rates = <60000000>;
+		clock-names = "adc_tsc_fck";
+
+		adc {
+			#io-channel-cells = <1>;
+			compatible = "ti,am3359-adc";
+		};
+	};
+
+	mcu_navss {
+		compatible = "simple-mfd";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		dma-coherent;
+		dma-ranges;
+
+		ti,sci-dev-id = <232>;
+
+		mcu_ringacc: ringacc@2b800000 {
+			compatible = "ti,am654-navss-ringacc";
+			reg =	<0x0 0x2b800000 0x0 0x400000>,
+				<0x0 0x2b000000 0x0 0x400000>,
+				<0x0 0x28590000 0x0 0x100>,
+				<0x0 0x2a500000 0x0 0x40000>;
+			reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target";
+			ti,num-rings = <286>;
+			ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <235>;
+			msi-parent = <&main_udmass_inta>;
+		};
+
+		mcu_udmap: dma-controller@285c0000 {
+			compatible = "ti,j721e-navss-mcu-udmap";
+			reg =	<0x0 0x285c0000 0x0 0x100>,
+				<0x0 0x2a800000 0x0 0x40000>,
+				<0x0 0x2aa00000 0x0 0x40000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt";
+			msi-parent = <&main_udmass_inta>;
+			#dma-cells = <1>;
+
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <236>;
+			ti,ringacc = <&mcu_ringacc>;
+
+			ti,sci-rm-range-tchan = <0x0d>, /* TX_CHAN */
+						<0x0f>; /* TX_HCHAN */
+			ti,sci-rm-range-rchan = <0x0a>, /* RX_CHAN */
+						<0x0b>; /* RX_HCHAN */
+			ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */
+		};
+	};
 };
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
index 1884fc70148f..7680109ca60a 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
@@ -27,3 +27,48 @@
 		};
 	};
 };
+
+&wkup_pmx0 {
+	wkup_i2c0_pins_default: wkup_i2c0_pins_default {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0xf8, PIN_INPUT_PULLUP, 0) /* (J25) WKUP_I2C0_SCL */
+			J721E_WKUP_IOPAD(0xfc, PIN_INPUT_PULLUP, 0) /* (H24) WKUP_I2C0_SDA */
+		>;
+	};
+
+	mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins-default {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* MCU_OSPI0_CLK */
+			J721E_WKUP_IOPAD(0x0008, PIN_INPUT, 0)  /* MCU_OSPI0_DQS */
+			J721E_WKUP_IOPAD(0x000c, PIN_INPUT, 0)  /* MCU_OSPI0_D0 */
+			J721E_WKUP_IOPAD(0x0010, PIN_INPUT, 0)  /* MCU_OSPI0_D1 */
+			J721E_WKUP_IOPAD(0x0014, PIN_INPUT, 0)  /* MCU_OSPI0_D2 */
+			J721E_WKUP_IOPAD(0x0018, PIN_INPUT, 0)  /* MCU_OSPI0_D3 */
+			J721E_WKUP_IOPAD(0x001c, PIN_INPUT, 0)  /* MCU_OSPI0_D4 */
+			J721E_WKUP_IOPAD(0x0020, PIN_INPUT, 0)  /* MCU_OSPI0_D5 */
+			J721E_WKUP_IOPAD(0x0024, PIN_INPUT, 0)  /* MCU_OSPI0_D6 */
+			J721E_WKUP_IOPAD(0x0028, PIN_INPUT, 0)  /* MCU_OSPI0_D7 */
+			J721E_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0) /* MCU_OSPI0_CSn0 */
+		>;
+	};
+};
+
+&ospi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
+
+	flash@0{
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <8>;
+		spi-max-frequency = <40000000>;
+		cdns,tshsl-ns = <60>;
+		cdns,tsd2d-ns = <60>;
+		cdns,tchsh-ns = <60>;
+		cdns,tslch-ns = <60>;
+		cdns,read-delay = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e.dtsi b/arch/arm64/boot/dts/ti/k3-j721e.dtsi
index ee5470edb435..027bd1febafa 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e.dtsi
@@ -130,7 +130,7 @@
 			 <0x00 0x06000000 0x00 0x06000000 0x00 0x00400000>, /* USBSS0 */
 			 <0x00 0x06400000 0x00 0x06400000 0x00 0x00400000>, /* USBSS1 */
 			 <0x00 0x01000000 0x00 0x01000000 0x00 0x0af02400>, /* Most peripherals */
-			 <0x00 0x30800000 0x00 0x30800000 0x00 0x0bc00000>, /* MAIN NAVSS */
+			 <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>, /* MAIN NAVSS */
 			 <0x00 0x0d000000 0x00 0x0d000000 0x00 0x01000000>, /* PCIe Core*/
 			 <0x00 0x10000000 0x00 0x10000000 0x00 0x10000000>, /* PCIe DAT */
 			 <0x00 0x64800000 0x00 0x64800000 0x00 0x00800000>, /* C71 */
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi
new file mode 100644
index 000000000000..9868ca15dfc5
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi
@@ -0,0 +1,222 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Clock specification for Xilinx ZynqMP
+ *
+ * (C) Copyright 2017 - 2019, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ */
+
+#include <dt-bindings/clock/xlnx-zynqmp-clk.h>
+/ {
+	pss_ref_clk: pss_ref_clk {
+		u-boot,dm-pre-reloc;
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <33333333>;
+	};
+
+	video_clk: video_clk {
+		u-boot,dm-pre-reloc;
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <27000000>;
+	};
+
+	pss_alt_ref_clk: pss_alt_ref_clk {
+		u-boot,dm-pre-reloc;
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	gt_crx_ref_clk: gt_crx_ref_clk {
+		u-boot,dm-pre-reloc;
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <108000000>;
+	};
+
+	aux_ref_clk: aux_ref_clk {
+		u-boot,dm-pre-reloc;
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <27000000>;
+	};
+};
+
+&can0 {
+	clocks = <&zynqmp_clk CAN0_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&can1 {
+	clocks = <&zynqmp_clk CAN1_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&cpu0 {
+	clocks = <&zynqmp_clk ACPU>;
+};
+
+&fpd_dma_chan1 {
+	clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&fpd_dma_chan2 {
+	clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&fpd_dma_chan3 {
+	clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&fpd_dma_chan4 {
+	clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&fpd_dma_chan5 {
+	clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&fpd_dma_chan6 {
+	clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&fpd_dma_chan7 {
+	clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&fpd_dma_chan8 {
+	clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&lpd_dma_chan1 {
+	clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&lpd_dma_chan2 {
+	clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&lpd_dma_chan3 {
+	clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&lpd_dma_chan4 {
+	clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&lpd_dma_chan5 {
+	clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&lpd_dma_chan6 {
+	clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&lpd_dma_chan7 {
+	clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&lpd_dma_chan8 {
+	clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&gem0 {
+	clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM0_REF>,
+		 <&zynqmp_clk GEM0_TX>, <&zynqmp_clk GEM0_RX>,
+		 <&zynqmp_clk GEM_TSU>;
+	clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
+};
+
+&gem1 {
+	clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM1_REF>,
+		 <&zynqmp_clk GEM1_TX>, <&zynqmp_clk GEM1_RX>,
+		 <&zynqmp_clk GEM_TSU>;
+	clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
+};
+
+&gem2 {
+	clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM2_REF>,
+		 <&zynqmp_clk GEM2_TX>, <&zynqmp_clk GEM2_RX>,
+		 <&zynqmp_clk GEM_TSU>;
+	clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
+};
+
+&gem3 {
+	clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM3_REF>,
+		 <&zynqmp_clk GEM3_TX>, <&zynqmp_clk GEM3_RX>,
+		 <&zynqmp_clk GEM_TSU>;
+	clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
+};
+
+&gpio {
+	clocks = <&zynqmp_clk LPD_LSBUS>;
+};
+
+&i2c0 {
+	clocks = <&zynqmp_clk I2C0_REF>;
+};
+
+&i2c1 {
+	clocks = <&zynqmp_clk I2C1_REF>;
+};
+
+&pcie {
+	clocks = <&zynqmp_clk PCIE_REF>;
+};
+
+&sata {
+	clocks = <&zynqmp_clk SATA_REF>;
+};
+
+&sdhci0 {
+	clocks = <&zynqmp_clk SDIO0_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&sdhci1 {
+	clocks = <&zynqmp_clk SDIO1_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&spi0 {
+	clocks = <&zynqmp_clk SPI0_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&spi1 {
+	clocks = <&zynqmp_clk SPI1_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&ttc0 {
+	clocks = <&zynqmp_clk LPD_LSBUS>;
+};
+
+&ttc1 {
+	clocks = <&zynqmp_clk LPD_LSBUS>;
+};
+
+&ttc2 {
+	clocks = <&zynqmp_clk LPD_LSBUS>;
+};
+
+&ttc3 {
+	clocks = <&zynqmp_clk LPD_LSBUS>;
+};
+
+&uart0 {
+	clocks = <&zynqmp_clk UART0_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&uart1 {
+	clocks = <&zynqmp_clk UART1_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&usb0 {
+	clocks = <&zynqmp_clk USB0_BUS_REF>, <&zynqmp_clk USB3_DUAL_REF>;
+};
+
+&usb1 {
+	clocks = <&zynqmp_clk USB1_BUS_REF>, <&zynqmp_clk USB3_DUAL_REF>;
+};
+
+&watchdog0 {
+	clocks = <&zynqmp_clk WDT>;
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-clk.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp-clk.dtsi
deleted file mode 100644
index 306ad2157c98..000000000000
--- a/arch/arm64/boot/dts/xilinx/zynqmp-clk.dtsi
+++ /dev/null
@@ -1,213 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Clock specification for Xilinx ZynqMP
- *
- * (C) Copyright 2015 - 2018, Xilinx, Inc.
- *
- * Michal Simek <michal.simek@xilinx.com>
- */
-
-/ {
-	clk100: clk100 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <100000000>;
-	};
-
-	clk125: clk125 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <125000000>;
-	};
-
-	clk200: clk200 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <200000000>;
-	};
-
-	clk250: clk250 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <250000000>;
-	};
-
-	clk300: clk300 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <300000000>;
-	};
-
-	clk600: clk600 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <600000000>;
-	};
-
-	dp_aclk: clock0 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <100000000>;
-		clock-accuracy = <100>;
-	};
-
-	dp_aud_clk: clock1 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <24576000>;
-		clock-accuracy = <100>;
-	};
-
-	dpdma_clk: dpdma-clk {
-		compatible = "fixed-clock";
-		#clock-cells = <0x0>;
-		clock-frequency = <533000000>;
-	};
-
-	drm_clock: drm-clock {
-		compatible = "fixed-clock";
-		#clock-cells = <0x0>;
-		clock-frequency = <262750000>;
-		clock-accuracy = <0x64>;
-	};
-};
-
-&can0 {
-	clocks = <&clk100 &clk100>;
-};
-
-&can1 {
-	clocks = <&clk100 &clk100>;
-};
-
-&fpd_dma_chan1 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&fpd_dma_chan2 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&fpd_dma_chan3 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&fpd_dma_chan4 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&fpd_dma_chan5 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&fpd_dma_chan6 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&fpd_dma_chan7 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&fpd_dma_chan8 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&lpd_dma_chan1 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&lpd_dma_chan2 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&lpd_dma_chan3 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&lpd_dma_chan4 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&lpd_dma_chan5 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&lpd_dma_chan6 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&lpd_dma_chan7 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&lpd_dma_chan8 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&gem0 {
-	clocks = <&clk125>, <&clk125>, <&clk125>;
-};
-
-&gem1 {
-	clocks = <&clk125>, <&clk125>, <&clk125>;
-};
-
-&gem2 {
-	clocks = <&clk125>, <&clk125>, <&clk125>;
-};
-
-&gem3 {
-	clocks = <&clk125>, <&clk125>, <&clk125>;
-};
-
-&gpio {
-	clocks = <&clk100>;
-};
-
-&i2c0 {
-	clocks = <&clk100>;
-};
-
-&i2c1 {
-	clocks = <&clk100>;
-};
-
-&sata {
-	clocks = <&clk250>;
-};
-
-&sdhci0 {
-	clocks = <&clk200 &clk200>;
-};
-
-&sdhci1 {
-	clocks = <&clk200 &clk200>;
-};
-
-&spi0 {
-	clocks = <&clk200 &clk200>;
-};
-
-&spi1 {
-	clocks = <&clk200 &clk200>;
-};
-
-&uart0 {
-	clocks = <&clk100 &clk100>;
-};
-
-&uart1 {
-	clocks = <&clk100 &clk100>;
-};
-
-&usb0 {
-	clocks = <&clk250>, <&clk250>;
-};
-
-&usb1 {
-	clocks = <&clk250>, <&clk250>;
-};
-
-&watchdog0 {
-	clocks = <&clk250>;
-};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts
index 0f7b4cf6078e..2e05fa416955 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts
@@ -2,7 +2,7 @@
 /*
  * dts file for Xilinx ZynqMP ZC1232
  *
- * (C) Copyright 2017 - 2018, Xilinx, Inc.
+ * (C) Copyright 2017 - 2019, Xilinx, Inc.
  *
  * Michal Simek <michal.simek@xilinx.com>
  */
@@ -10,7 +10,7 @@
 /dts-v1/;
 
 #include "zynqmp.dtsi"
-#include "zynqmp-clk.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
 
 / {
 	model = "ZynqMP ZC1232 RevA";
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts
index 9092828f92ec..3d0aaa02f184 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts
@@ -2,7 +2,7 @@
 /*
  * dts file for Xilinx ZynqMP ZC1254
  *
- * (C) Copyright 2015 - 2018, Xilinx, Inc.
+ * (C) Copyright 2015 - 2019, Xilinx, Inc.
  *
  * Michal Simek <michal.simek@xilinx.com>
  * Siva Durga Prasad Paladugu <sivadur@xilinx.com>
@@ -11,7 +11,7 @@
 /dts-v1/;
 
 #include "zynqmp.dtsi"
-#include "zynqmp-clk.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
 
 / {
 	model = "ZynqMP ZC1254 RevA";
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1275-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1275-revA.dts
index 4f404c580eec..66a90483b004 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1275-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1275-revA.dts
@@ -2,7 +2,7 @@
 /*
  * dts file for Xilinx ZynqMP ZC1275
  *
- * (C) Copyright 2017 - 2018, Xilinx, Inc.
+ * (C) Copyright 2017 - 2019, Xilinx, Inc.
  *
  * Michal Simek <michal.simek@xilinx.com>
  * Siva Durga Prasad Paladugu <sivadur@xilinx.com>
@@ -11,7 +11,7 @@
 /dts-v1/;
 
 #include "zynqmp.dtsi"
-#include "zynqmp-clk.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
 
 / {
 	model = "ZynqMP ZC1275 RevA";
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts
index 9a3e39d1294f..69f6e4610739 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts
@@ -2,7 +2,7 @@
 /*
  * dts file for Xilinx ZynqMP zc1751-xm015-dc1
  *
- * (C) Copyright 2015 - 2018, Xilinx, Inc.
+ * (C) Copyright 2015 - 2019, Xilinx, Inc.
  *
  * Michal Simek <michal.simek@xilinx.com>
  */
@@ -10,7 +10,7 @@
 /dts-v1/;
 
 #include "zynqmp.dtsi"
-#include "zynqmp-clk.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 
 / {
@@ -73,7 +73,7 @@
 	status = "okay";
 	phy-handle = <&phy0>;
 	phy-mode = "rgmii-id";
-	phy0: phy@0 {
+	phy0: ethernet-phy@0 {
 		reg = <0>;
 	};
 };
@@ -128,4 +128,5 @@
 /* ULPI SMSC USB3320 */
 &usb0 {
 	status = "okay";
+	dr_mode = "host";
 };
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts
index 2421ec71a201..4a86efa32d68 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts
@@ -2,7 +2,7 @@
 /*
  * dts file for Xilinx ZynqMP zc1751-xm016-dc2
  *
- * (C) Copyright 2015 - 2018, Xilinx, Inc.
+ * (C) Copyright 2015 - 2019, Xilinx, Inc.
  *
  * Michal Simek <michal.simek@xilinx.com>
  */
@@ -10,7 +10,7 @@
 /dts-v1/;
 
 #include "zynqmp.dtsi"
-#include "zynqmp-clk.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 
 / {
@@ -84,7 +84,7 @@
 	status = "okay";
 	phy-handle = <&phy0>;
 	phy-mode = "rgmii-id";
-	phy0: phy@5 {
+	phy0: ethernet-phy@5 {
 		reg = <5>;
 		ti,rx-internal-delay = <0x8>;
 		ti,tx-internal-delay = <0xa>;
@@ -123,7 +123,7 @@
 	status = "okay";
 	num-cs = <1>;
 
-	spi0_flash0: flash0@0 {
+	spi0_flash0: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "sst,sst25wf080", "jedec,spi-nor";
@@ -141,7 +141,7 @@
 	status = "okay";
 	num-cs = <1>;
 
-	spi1_flash0: flash0@0 {
+	spi1_flash0: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "atmel,at45db041e", "atmel,at45", "atmel,dataflash";
@@ -158,6 +158,7 @@
 /* ULPI SMSC USB3320 */
 &usb1 {
 	status = "okay";
+	dr_mode = "host";
 };
 
 &uart0 {
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts
index 7a49deeae647..4ea6ef5a7f2b 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts
@@ -2,7 +2,7 @@
 /*
  * dts file for Xilinx ZynqMP zc1751-xm017-dc3
  *
- * (C) Copyright 2016 - 2018, Xilinx, Inc.
+ * (C) Copyright 2016 - 2019, Xilinx, Inc.
  *
  * Michal Simek <michal.simek@xilinx.com>
  */
@@ -10,7 +10,7 @@
 /dts-v1/;
 
 #include "zynqmp.dtsi"
-#include "zynqmp-clk.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
 
 / {
 	model = "ZynqMP zc1751-xm017-dc3 RevA";
@@ -73,7 +73,7 @@
 	status = "okay";
 	phy-handle = <&phy0>;
 	phy-mode = "rgmii-id";
-	phy0: phy@0 { /* VSC8211 */
+	phy0: ethernet-phy@0 { /* VSC8211 */
 		reg = <0>;
 	};
 };
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts
index 54c7b4f1d1e4..2366cd9f091a 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts
@@ -2,7 +2,7 @@
 /*
  * dts file for Xilinx ZynqMP zc1751-xm018-dc4
  *
- * (C) Copyright 2015 - 2018, Xilinx, Inc.
+ * (C) Copyright 2015 - 2019, Xilinx, Inc.
  *
  * Michal Simek <michal.simek@xilinx.com>
  */
@@ -10,7 +10,7 @@
 /dts-v1/;
 
 #include "zynqmp.dtsi"
-#include "zynqmp-clk.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
 
 / {
 	model = "ZynqMP zc1751-xm018-dc4";
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts
index b8b5ff13818d..41934e3525c6 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts
@@ -2,7 +2,7 @@
 /*
  * dts file for Xilinx ZynqMP zc1751-xm019-dc5
  *
- * (C) Copyright 2015 - 2018, Xilinx, Inc.
+ * (C) Copyright 2015 - 2019, Xilinx, Inc.
  *
  * Siva Durga Prasad <siva.durga.paladugu@xilinx.com>
  * Michal Simek <michal.simek@xilinx.com>
@@ -11,7 +11,7 @@
 /dts-v1/;
 
 #include "zynqmp.dtsi"
-#include "zynqmp-clk.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 
 / {
@@ -74,7 +74,7 @@
 	status = "okay";
 	phy-handle = <&phy0>;
 	phy-mode = "rgmii-id";
-	phy0: phy@0 {
+	phy0: ethernet-phy@0 {
 		reg = <0>;
 	};
 };
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
index e5699d0d91e4..d60110ad8367 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
@@ -2,7 +2,7 @@
 /*
  * dts file for Xilinx ZynqMP ZCU100 revC
  *
- * (C) Copyright 2016 - 2018, Xilinx, Inc.
+ * (C) Copyright 2016 - 2019, Xilinx, Inc.
  *
  * Michal Simek <michal.simek@xilinx.com>
  * Nathalie Chan King Choy
@@ -11,7 +11,7 @@
 /dts-v1/;
 
 #include "zynqmp.dtsi"
-#include "zynqmp-clk.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
@@ -103,6 +103,11 @@
 		reset-gpios = <&gpio 7 GPIO_ACTIVE_LOW>; /* WIFI_EN */
 		post-power-on-delay-ms = <10>;
 	};
+
+	ina226 {
+		compatible = "iio-hwmon";
+		io-channels = <&u35 0>, <&u35 1>, <&u35 2>, <&u35 3>;
+	};
 };
 
 &dcc {
@@ -191,8 +196,9 @@
 			#size-cells = <0>;
 			reg = <5>;
 			/* PS_PMBUS */
-			ina226@40 { /* u35 */
+			u35: ina226@40 { /* u35 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
 				reg = <0x40>;
 				shunt-resistor = <10000>;
 				/* MIO31 is alert which should be routed to PMUFW */
@@ -226,7 +232,6 @@
 &sdhci0 {
 	status = "okay";
 	no-1-8-v;
-	broken-cd; /* CD has to be enabled by default */
 	disable-wp;
 };
 
@@ -251,11 +256,13 @@
 &spi0 { /* Low Speed connector */
 	status = "okay";
 	label = "LS-SPI0";
+	num-cs = <1>;
 };
 
 &spi1 { /* High Speed connector */
 	status = "okay";
 	label = "HS-SPI1";
+	num-cs = <1>;
 };
 
 &uart0 {
@@ -274,11 +281,13 @@
 /* ULPI SMSC USB3320 */
 &usb0 {
 	status = "okay";
+	dr_mode = "peripheral";
 };
 
 /* ULPI SMSC USB3320 */
 &usb1 {
 	status = "okay";
+	dr_mode = "host";
 };
 
 &watchdog0 {
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
index 2a3b66547c6d..4f801721564f 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
@@ -2,7 +2,7 @@
 /*
  * dts file for Xilinx ZynqMP ZCU102 RevA
  *
- * (C) Copyright 2015 - 2018, Xilinx, Inc.
+ * (C) Copyright 2015 - 2019, Xilinx, Inc.
  *
  * Michal Simek <michal.simek@xilinx.com>
  */
@@ -10,7 +10,7 @@
 /dts-v1/;
 
 #include "zynqmp.dtsi"
-#include "zynqmp-clk.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/gpio/gpio.h>
 
@@ -59,6 +59,79 @@
 			linux,default-trigger = "heartbeat";
 		};
 	};
+
+	ina226-u76 {
+		compatible = "iio-hwmon";
+		io-channels = <&u76 0>, <&u76 1>, <&u76 2>, <&u76 3>;
+	};
+	ina226-u77 {
+		compatible = "iio-hwmon";
+		io-channels = <&u77 0>, <&u77 1>, <&u77 2>, <&u77 3>;
+	};
+	ina226-u78 {
+		compatible = "iio-hwmon";
+		io-channels = <&u78 0>, <&u78 1>, <&u78 2>, <&u78 3>;
+	};
+	ina226-u87 {
+		compatible = "iio-hwmon";
+		io-channels = <&u87 0>, <&u87 1>, <&u87 2>, <&u87 3>;
+	};
+	ina226-u85 {
+		compatible = "iio-hwmon";
+		io-channels = <&u85 0>, <&u85 1>, <&u85 2>, <&u85 3>;
+	};
+	ina226-u86 {
+		compatible = "iio-hwmon";
+		io-channels = <&u86 0>, <&u86 1>, <&u86 2>, <&u86 3>;
+	};
+	ina226-u93 {
+		compatible = "iio-hwmon";
+		io-channels = <&u93 0>, <&u93 1>, <&u93 2>, <&u93 3>;
+	};
+	ina226-u88 {
+		compatible = "iio-hwmon";
+		io-channels = <&u88 0>, <&u88 1>, <&u88 2>, <&u88 3>;
+	};
+	ina226-u15 {
+		compatible = "iio-hwmon";
+		io-channels = <&u15 0>, <&u15 1>, <&u15 2>, <&u15 3>;
+	};
+	ina226-u92 {
+		compatible = "iio-hwmon";
+		io-channels = <&u92 0>, <&u92 1>, <&u92 2>, <&u92 3>;
+	};
+	ina226-u79 {
+		compatible = "iio-hwmon";
+		io-channels = <&u79 0>, <&u79 1>, <&u79 2>, <&u79 3>;
+	};
+	ina226-u81 {
+		compatible = "iio-hwmon";
+		io-channels = <&u81 0>, <&u81 1>, <&u81 2>, <&u81 3>;
+	};
+	ina226-u80 {
+		compatible = "iio-hwmon";
+		io-channels = <&u80 0>, <&u80 1>, <&u80 2>, <&u80 3>;
+	};
+	ina226-u84 {
+		compatible = "iio-hwmon";
+		io-channels = <&u84 0>, <&u84 1>, <&u84 2>, <&u84 3>;
+	};
+	ina226-u16 {
+		compatible = "iio-hwmon";
+		io-channels = <&u16 0>, <&u16 1>, <&u16 2>, <&u16 3>;
+	};
+	ina226-u65 {
+		compatible = "iio-hwmon";
+		io-channels = <&u65 0>, <&u65 1>, <&u65 2>, <&u65 3>;
+	};
+	ina226-u74 {
+		compatible = "iio-hwmon";
+		io-channels = <&u74 0>, <&u74 1>, <&u74 2>, <&u74 3>;
+	};
+	ina226-u75 {
+		compatible = "iio-hwmon";
+		io-channels = <&u75 0>, <&u75 1>, <&u75 2>, <&u75 3>;
+	};
 };
 
 &can1 {
@@ -105,7 +178,7 @@
 	status = "okay";
 	phy-handle = <&phy0>;
 	phy-mode = "rgmii-id";
-	phy0: phy@21 {
+	phy0: ethernet-phy@21 {
 		reg = <21>;
 		ti,rx-internal-delay = <0x8>;
 		ti,tx-internal-delay = <0xa>;
@@ -125,21 +198,11 @@
 	tca6416_u97: gpio@20 {
 		compatible = "ti,tca6416";
 		reg = <0x20>;
-		gpio-controller;
+		gpio-controller; /* IRQ not connected */
 		#gpio-cells = <2>;
-		/*
-		 * IRQ not connected
-		 * Lines:
-		 * 0 - PS_GTR_LAN_SEL0
-		 * 1 - PS_GTR_LAN_SEL1
-		 * 2 - PS_GTR_LAN_SEL2
-		 * 3 - PS_GTR_LAN_SEL3
-		 * 4 - PCI_CLK_DIR_SEL
-		 * 5 - IIC_MUX_RESET_B
-		 * 6 - GEM3_EXP_RESET_B
-		 * 7, 10 - 17 - not connected
-		 */
-
+		gpio-line-names = "PS_GTR_LAN_SEL0", "PS_GTR_LAN_SEL1", "PS_GTR_LAN_SEL2", "PS_GTR_LAN_SEL3",
+				"PCI_CLK_DIR_SEL", "IIC_MUX_RESET_B", "GEM3_EXP_RESET_B",
+				"", "", "", "", "", "", "", "", "";
 		gtr-sel0 {
 			gpio-hog;
 			gpios = <0 0>;
@@ -169,27 +232,12 @@
 	tca6416_u61: gpio@21 {
 		compatible = "ti,tca6416";
 		reg = <0x21>;
-		gpio-controller;
+		gpio-controller; /* IRQ not connected */
 		#gpio-cells = <2>;
-		/*
-		 * IRQ not connected
-		 * Lines:
-		 * 0 - VCCPSPLL_EN
-		 * 1 - MGTRAVCC_EN
-		 * 2 - MGTRAVTT_EN
-		 * 3 - VCCPSDDRPLL_EN
-		 * 4 - MIO26_PMU_INPUT_LS
-		 * 5 - PL_PMBUS_ALERT
-		 * 6 - PS_PMBUS_ALERT
-		 * 7 - MAXIM_PMBUS_ALERT
-		 * 10 - PL_DDR4_VTERM_EN
-		 * 11 - PL_DDR4_VPP_2V5_EN
-		 * 12 - PS_DIMM_VDDQ_TO_PSVCCO_ON
-		 * 13 - PS_DIMM_SUSPEND_EN
-		 * 14 - PS_DDR4_VTERM_EN
-		 * 15 - PS_DDR4_VPP_2V5_EN
-		 * 16 - 17 - not connected
-		 */
+		gpio-line-names = "VCCPSPLL_EN", "MGTRAVCC_EN", "MGTRAVTT_EN", "VCCPSDDRPLL_EN", "MIO26_PMU_INPUT_LS",
+				"PL_PMBUS_ALERT", "PS_PMBUS_ALERT", "MAXIM_PMBUS_ALERT", "PL_DDR4_VTERM_EN",
+				"PL_DDR4_VPP_2V5_EN", "PS_DIMM_VDDQ_TO_PSVCCO_ON", "PS_DIMM_SUSPEND_EN",
+				"PS_DDR4_VTERM_EN", "PS_DDR4_VPP_2V5_EN", "", "";
 	};
 
 	i2c-mux@75 { /* u60 */
@@ -202,53 +250,73 @@
 			#size-cells = <0>;
 			reg = <0>;
 			/* PS_PMBUS */
-			ina226@40 { /* u76 */
+			u76: ina226@40 { /* u76 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u76";
 				reg = <0x40>;
 				shunt-resistor = <5000>;
 			};
-			ina226@41 { /* u77 */
+			u77: ina226@41 { /* u77 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u77";
 				reg = <0x41>;
 				shunt-resistor = <5000>;
 			};
-			ina226@42 { /* u78 */
+			u78: ina226@42 { /* u78 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u78";
 				reg = <0x42>;
 				shunt-resistor = <5000>;
 			};
-			ina226@43 { /* u87 */
+			u87: ina226@43 { /* u87 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u87";
 				reg = <0x43>;
 				shunt-resistor = <5000>;
 			};
-			ina226@44 { /* u85 */
+			u85: ina226@44 { /* u85 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u85";
 				reg = <0x44>;
 				shunt-resistor = <5000>;
 			};
-			ina226@45 { /* u86 */
+			u86: ina226@45 { /* u86 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u86";
 				reg = <0x45>;
 				shunt-resistor = <5000>;
 			};
-			ina226@46 { /* u93 */
+			u93: ina226@46 { /* u93 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u93";
 				reg = <0x46>;
 				shunt-resistor = <5000>;
 			};
-			ina226@47 { /* u88 */
+			u88: ina226@47 { /* u88 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u88";
 				reg = <0x47>;
 				shunt-resistor = <5000>;
 			};
-			ina226@4a { /* u15 */
+			u15: ina226@4a { /* u15 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u15";
 				reg = <0x4a>;
 				shunt-resistor = <5000>;
 			};
-			ina226@4b { /* u92 */
+			u92: ina226@4b { /* u92 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u92";
 				reg = <0x4b>;
 				shunt-resistor = <5000>;
 			};
@@ -258,43 +326,59 @@
 			#size-cells = <0>;
 			reg = <1>;
 			/* PL_PMBUS */
-			ina226@40 { /* u79 */
+			u79: ina226@40 { /* u79 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u79";
 				reg = <0x40>;
 				shunt-resistor = <2000>;
 			};
-			ina226@41 { /* u81 */
+			u81: ina226@41 { /* u81 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u81";
 				reg = <0x41>;
 				shunt-resistor = <5000>;
 			};
-			ina226@42 { /* u80 */
+			u80: ina226@42 { /* u80 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u80";
 				reg = <0x42>;
 				shunt-resistor = <5000>;
 			};
-			ina226@43 { /* u84 */
+			u84: ina226@43 { /* u84 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u84";
 				reg = <0x43>;
 				shunt-resistor = <5000>;
 			};
-			ina226@44 { /* u16 */
+			u16: ina226@44 { /* u16 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u16";
 				reg = <0x44>;
 				shunt-resistor = <5000>;
 			};
-			ina226@45 { /* u65 */
+			u65: ina226@45 { /* u65 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u65";
 				reg = <0x45>;
 				shunt-resistor = <5000>;
 			};
-			ina226@46 { /* u74 */
+			u74: ina226@46 { /* u74 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u74";
 				reg = <0x46>;
 				shunt-resistor = <5000>;
 			};
-			ina226@47 { /* u75 */
+			u75: ina226@47 { /* u75 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u75";
 				reg = <0x47>;
 				shunt-resistor = <5000>;
 			};
@@ -414,6 +498,7 @@
 				temperature-stability = <50>;
 				factory-fout = <300000000>;
 				clock-frequency = <300000000>;
+				clock-output-names = "si570_user";
 			};
 		};
 		i2c@3 {
@@ -427,6 +512,7 @@
 				temperature-stability = <50>; /* copy from zc702 */
 				factory-fout = <156250000>;
 				clock-frequency = <148500000>;
+				clock-output-names = "si570_mgt";
 			};
 		};
 		i2c@4 {
@@ -540,6 +626,7 @@
 /* ULPI SMSC USB3320 */
 &usb0 {
 	status = "okay";
+	dr_mode = "host";
 };
 
 &watchdog0 {
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts
index 1780ed237daf..d9ad8a4b20d3 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts
@@ -16,7 +16,7 @@
 
 &gem3 {
 	phy-handle = <&phyc>;
-	phyc: phy@c {
+	phyc: ethernet-phy@c {
 		reg = <0xc>;
 		ti,rx-internal-delay = <0x8>;
 		ti,tx-internal-delay = <0xa>;
@@ -24,7 +24,7 @@
 		ti,dp83867-rxctrl-strap-quirk;
 	};
 	/* Cleanup from RevA */
-	/delete-node/ phy@21;
+	/delete-node/ ethernet-phy@21;
 };
 
 /* Fix collision with u61 */
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts
index 8f456146409f..7a4614e3f5fa 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts
@@ -2,7 +2,7 @@
 /*
  * dts file for Xilinx ZynqMP ZCU104
  *
- * (C) Copyright 2017 - 2018, Xilinx, Inc.
+ * (C) Copyright 2017 - 2019, Xilinx, Inc.
  *
  * Michal Simek <michal.simek@xilinx.com>
  */
@@ -10,7 +10,7 @@
 /dts-v1/;
 
 #include "zynqmp.dtsi"
-#include "zynqmp-clk.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 
 / {
@@ -50,7 +50,7 @@
 	status = "okay";
 	phy-handle = <&phy0>;
 	phy-mode = "rgmii-id";
-	phy0: phy@c {
+	phy0: ethernet-phy@c {
 		reg = <0xc>;
 		ti,rx-internal-delay = <0x8>;
 		ti,tx-internal-delay = <0xa>;
@@ -118,9 +118,9 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <4>;
-			tca6416_u97: gpio@21 {
+			tca6416_u97: gpio@20 {
 				compatible = "ti,tca6416";
-				reg = <0x21>;
+				reg = <0x20>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				/*
@@ -189,6 +189,7 @@
 /* ULPI SMSC USB3320 */
 &usb0 {
 	status = "okay";
+	dr_mode = "host";
 };
 
 &watchdog0 {
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
index 93ce7eb81498..6e9efe233838 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
@@ -2,7 +2,7 @@
 /*
  * dts file for Xilinx ZynqMP ZCU106
  *
- * (C) Copyright 2016, Xilinx, Inc.
+ * (C) Copyright 2016 - 2019, Xilinx, Inc.
  *
  * Michal Simek <michal.simek@xilinx.com>
  */
@@ -10,7 +10,7 @@
 /dts-v1/;
 
 #include "zynqmp.dtsi"
-#include "zynqmp-clk.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/gpio/gpio.h>
 
@@ -59,6 +59,79 @@
 			linux,default-trigger = "heartbeat";
 		};
 	};
+
+	ina226-u76 {
+		compatible = "iio-hwmon";
+		io-channels = <&u76 0>, <&u76 1>, <&u76 2>, <&u76 3>;
+	};
+	ina226-u77 {
+		compatible = "iio-hwmon";
+		io-channels = <&u77 0>, <&u77 1>, <&u77 2>, <&u77 3>;
+	};
+	ina226-u78 {
+		compatible = "iio-hwmon";
+		io-channels = <&u78 0>, <&u78 1>, <&u78 2>, <&u78 3>;
+	};
+	ina226-u87 {
+		compatible = "iio-hwmon";
+		io-channels = <&u87 0>, <&u87 1>, <&u87 2>, <&u87 3>;
+	};
+	ina226-u85 {
+		compatible = "iio-hwmon";
+		io-channels = <&u85 0>, <&u85 1>, <&u85 2>, <&u85 3>;
+	};
+	ina226-u86 {
+		compatible = "iio-hwmon";
+		io-channels = <&u86 0>, <&u86 1>, <&u86 2>, <&u86 3>;
+	};
+	ina226-u93 {
+		compatible = "iio-hwmon";
+		io-channels = <&u93 0>, <&u93 1>, <&u93 2>, <&u93 3>;
+	};
+	ina226-u88 {
+		compatible = "iio-hwmon";
+		io-channels = <&u88 0>, <&u88 1>, <&u88 2>, <&u88 3>;
+	};
+	ina226-u15 {
+		compatible = "iio-hwmon";
+		io-channels = <&u15 0>, <&u15 1>, <&u15 2>, <&u15 3>;
+	};
+	ina226-u92 {
+		compatible = "iio-hwmon";
+		io-channels = <&u92 0>, <&u92 1>, <&u92 2>, <&u92 3>;
+	};
+	ina226-u79 {
+		compatible = "iio-hwmon";
+		io-channels = <&u79 0>, <&u79 1>, <&u79 2>, <&u79 3>;
+	};
+	ina226-u81 {
+		compatible = "iio-hwmon";
+		io-channels = <&u81 0>, <&u81 1>, <&u81 2>, <&u81 3>;
+	};
+	ina226-u80 {
+		compatible = "iio-hwmon";
+		io-channels = <&u80 0>, <&u80 1>, <&u80 2>, <&u80 3>;
+	};
+	ina226-u84 {
+		compatible = "iio-hwmon";
+		io-channels = <&u84 0>, <&u84 1>, <&u84 2>, <&u84 3>;
+	};
+	ina226-u16 {
+		compatible = "iio-hwmon";
+		io-channels = <&u16 0>, <&u16 1>, <&u16 2>, <&u16 3>;
+	};
+	ina226-u65 {
+		compatible = "iio-hwmon";
+		io-channels = <&u65 0>, <&u65 1>, <&u65 2>, <&u65 3>;
+	};
+	ina226-u74 {
+		compatible = "iio-hwmon";
+		io-channels = <&u74 0>, <&u74 1>, <&u74 2>, <&u74 3>;
+	};
+	ina226-u75 {
+		compatible = "iio-hwmon";
+		io-channels = <&u75 0>, <&u75 1>, <&u75 2>, <&u75 3>;
+	};
 };
 
 &can1 {
@@ -106,7 +179,7 @@
 	status = "okay";
 	phy-handle = <&phy0>;
 	phy-mode = "rgmii-id";
-	phy0: phy@c {
+	phy0: ethernet-phy@c {
 		reg = <0xc>;
 		ti,rx-internal-delay = <0x8>;
 		ti,tx-internal-delay = <0xa>;
@@ -177,53 +250,73 @@
 			#size-cells = <0>;
 			reg = <0>;
 			/* PS_PMBUS */
-			ina226@40 { /* u76 */
+			u76: ina226@40 { /* u76 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u76";
 				reg = <0x40>;
 				shunt-resistor = <5000>;
 			};
-			ina226@41 { /* u77 */
+			u77: ina226@41 { /* u77 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u77";
 				reg = <0x41>;
 				shunt-resistor = <5000>;
 			};
-			ina226@42 { /* u78 */
+			u78: ina226@42 { /* u78 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u78";
 				reg = <0x42>;
 				shunt-resistor = <5000>;
 			};
-			ina226@43 { /* u87 */
+			u87: ina226@43 { /* u87 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u87";
 				reg = <0x43>;
 				shunt-resistor = <5000>;
 			};
-			ina226@44 { /* u85 */
+			u85: ina226@44 { /* u85 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u85";
 				reg = <0x44>;
 				shunt-resistor = <5000>;
 			};
-			ina226@45 { /* u86 */
+			u86: ina226@45 { /* u86 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u86";
 				reg = <0x45>;
 				shunt-resistor = <5000>;
 			};
-			ina226@46 { /* u93 */
+			u93: ina226@46 { /* u93 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u93";
 				reg = <0x46>;
 				shunt-resistor = <5000>;
 			};
-			ina226@47 { /* u88 */
+			u88: ina226@47 { /* u88 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u88";
 				reg = <0x47>;
 				shunt-resistor = <5000>;
 			};
-			ina226@4a { /* u15 */
+			u15: ina226@4a { /* u15 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u15";
 				reg = <0x4a>;
 				shunt-resistor = <5000>;
 			};
-			ina226@4b { /* u92 */
+			u92: ina226@4b { /* u92 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u92";
 				reg = <0x4b>;
 				shunt-resistor = <5000>;
 			};
@@ -233,43 +326,59 @@
 			#size-cells = <0>;
 			reg = <1>;
 			/* PL_PMBUS */
-			ina226@40 { /* u79 */
+			u79: ina226@40 { /* u79 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u79";
 				reg = <0x40>;
 				shunt-resistor = <2000>;
 			};
-			ina226@41 { /* u81 */
+			u81: ina226@41 { /* u81 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u81";
 				reg = <0x41>;
 				shunt-resistor = <5000>;
 			};
-			ina226@42 { /* u80 */
+			u80: ina226@42 { /* u80 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u80";
 				reg = <0x42>;
 				shunt-resistor = <5000>;
 			};
-			ina226@43 { /* u84 */
+			u84: ina226@43 { /* u84 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u84";
 				reg = <0x43>;
 				shunt-resistor = <5000>;
 			};
-			ina226@44 { /* u16 */
+			u16: ina226@44 { /* u16 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u16";
 				reg = <0x44>;
 				shunt-resistor = <5000>;
 			};
-			ina226@45 { /* u65 */
+			u65: ina226@45 { /* u65 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u65";
 				reg = <0x45>;
 				shunt-resistor = <5000>;
 			};
-			ina226@46 { /* u74 */
+			u74: ina226@46 { /* u74 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u74";
 				reg = <0x46>;
 				shunt-resistor = <5000>;
 			};
-			ina226@47 { /* u75 */
+			u75: ina226@47 { /* u75 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u75";
 				reg = <0x47>;
 				shunt-resistor = <5000>;
 			};
@@ -388,6 +497,7 @@
 				temperature-stability = <50>;
 				factory-fout = <300000000>;
 				clock-frequency = <300000000>;
+				clock-output-names = "si570_user";
 			};
 		};
 		i2c@3 {
@@ -401,6 +511,7 @@
 				temperature-stability = <50>; /* copy from zc702 */
 				factory-fout = <156250000>;
 				clock-frequency = <148500000>;
+				clock-output-names = "si570_mgt";
 			};
 		};
 		i2c@4 {
@@ -514,6 +625,7 @@
 /* ULPI SMSC USB3320 */
 &usb0 {
 	status = "okay";
+	dr_mode = "host";
 };
 
 &watchdog0 {
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
index 8bb0001a026f..2e92634c77f9 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
@@ -2,7 +2,7 @@
 /*
  * dts file for Xilinx ZynqMP ZCU111
  *
- * (C) Copyright 2017 - 2018, Xilinx, Inc.
+ * (C) Copyright 2017 - 2019, Xilinx, Inc.
  *
  * Michal Simek <michal.simek@xilinx.com>
  */
@@ -10,7 +10,7 @@
 /dts-v1/;
 
 #include "zynqmp.dtsi"
-#include "zynqmp-clk.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/gpio/gpio.h>
 
@@ -59,6 +59,63 @@
 			linux,default-trigger = "heartbeat";
 		};
 	};
+
+	ina226-u67 {
+		compatible = "iio-hwmon";
+		io-channels = <&u67 0>, <&u67 1>, <&u67 2>, <&u67 3>;
+	};
+	ina226-u59 {
+		compatible = "iio-hwmon";
+		io-channels = <&u59 0>, <&u59 1>, <&u59 2>, <&u59 3>;
+	};
+	ina226-u61 {
+		compatible = "iio-hwmon";
+		io-channels = <&u61 0>, <&u61 1>, <&u61 2>, <&u61 3>;
+	};
+	ina226-u60 {
+		compatible = "iio-hwmon";
+		io-channels = <&u60 0>, <&u60 1>, <&u60 2>, <&u60 3>;
+	};
+	ina226-u64 {
+		compatible = "iio-hwmon";
+		io-channels = <&u64 0>, <&u64 1>, <&u64 2>, <&u64 3>;
+	};
+	ina226-u69 {
+		compatible = "iio-hwmon";
+		io-channels = <&u69 0>, <&u69 1>, <&u69 2>, <&u69 3>;
+	};
+	ina226-u66 {
+		compatible = "iio-hwmon";
+		io-channels = <&u66 0>, <&u66 1>, <&u66 2>, <&u66 3>;
+	};
+	ina226-u65 {
+		compatible = "iio-hwmon";
+		io-channels = <&u65 0>, <&u65 1>, <&u65 2>, <&u65 3>;
+	};
+	ina226-u63 {
+		compatible = "iio-hwmon";
+		io-channels = <&u63 0>, <&u63 1>, <&u63 2>, <&u63 3>;
+	};
+	ina226-u3 {
+		compatible = "iio-hwmon";
+		io-channels = <&u3 0>, <&u3 1>, <&u3 2>, <&u3 3>;
+	};
+	ina226-u71 {
+		compatible = "iio-hwmon";
+		io-channels = <&u71 0>, <&u71 1>, <&u71 2>, <&u71 3>;
+	};
+	ina226-u77 {
+		compatible = "iio-hwmon";
+		io-channels = <&u77 0>, <&u77 1>, <&u77 2>, <&u77 3>;
+	};
+	ina226-u73 {
+		compatible = "iio-hwmon";
+		io-channels = <&u73 0>, <&u73 1>, <&u73 2>, <&u73 3>;
+	};
+	ina226-u79 {
+		compatible = "iio-hwmon";
+		io-channels = <&u79 0>, <&u79 1>, <&u79 2>, <&u79 3>;
+	};
 };
 
 &dcc {
@@ -101,7 +158,7 @@
 	status = "okay";
 	phy-handle = <&phy0>;
 	phy-mode = "rgmii-id";
-	phy0: phy@c {
+	phy0: ethernet-phy@c {
 		reg = <0xc>;
 		ti,rx-internal-delay = <0x8>;
 		ti,tx-internal-delay = <0xa>;
@@ -152,73 +209,101 @@
 			reg = <0>;
 			/* PS_PMBUS */
 			/* PMBUS_ALERT done via pca9544 */
-			ina226@40 { /* u67 */
+			u67: ina226@40 { /* u67 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u67";
 				reg = <0x40>;
 				shunt-resistor = <2000>;
 			};
-			ina226@41 { /* u59 */
+			u59: ina226@41 { /* u59 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u59";
 				reg = <0x41>;
 				shunt-resistor = <5000>;
 			};
-			ina226@42 { /* u61 */
+			u61: ina226@42 { /* u61 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u61";
 				reg = <0x42>;
 				shunt-resistor = <5000>;
 			};
-			ina226@43 { /* u60 */
+			u60: ina226@43 { /* u60 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u60";
 				reg = <0x43>;
 				shunt-resistor = <5000>;
 			};
-			ina226@45 { /* u64 */
+			u64: ina226@45 { /* u64 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u64";
 				reg = <0x45>;
 				shunt-resistor = <5000>;
 			};
-			ina226@46 { /* u69 */
+			u69: ina226@46 { /* u69 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u69";
 				reg = <0x46>;
 				shunt-resistor = <2000>;
 			};
-			ina226@47 { /* u66 */
+			u66: ina226@47 { /* u66 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u66";
 				reg = <0x47>;
 				shunt-resistor = <5000>;
 			};
-			ina226@48 { /* u65 */
+			u65: ina226@48 { /* u65 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u65";
 				reg = <0x48>;
 				shunt-resistor = <5000>;
 			};
-			ina226@49 { /* u63 */
+			u63: ina226@49 { /* u63 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u63";
 				reg = <0x49>;
 				shunt-resistor = <5000>;
 			};
-			ina226@4a { /* u3 */
+			u3: ina226@4a { /* u3 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u3";
 				reg = <0x4a>;
 				shunt-resistor = <5000>;
 			};
-			ina226@4b { /* u71 */
+			u71: ina226@4b { /* u71 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u71";
 				reg = <0x4b>;
 				shunt-resistor = <5000>;
 			};
-			ina226@4c { /* u77 */
+			u77: ina226@4c { /* u77 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u77";
 				reg = <0x4c>;
 				shunt-resistor = <5000>;
 			};
-			ina226@4d { /* u73 */
+			u73: ina226@4d { /* u73 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u73";
 				reg = <0x4d>;
 				shunt-resistor = <5000>;
 			};
-			ina226@4e { /* u79 */
+			u79: ina226@4e { /* u79 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u79";
 				reg = <0x4e>;
 				shunt-resistor = <5000>;
 			};
@@ -304,6 +389,7 @@
 				temperature-stability = <50>;
 				factory-fout = <300000000>;
 				clock-frequency = <300000000>;
+				clock-output-names = "si570_user";
 			};
 		};
 		i2c@3 {
@@ -316,7 +402,8 @@
 				reg = <0x5d>;
 				temperature-stability = <50>;
 				factory-fout = <156250000>;
-				clock-frequency = <148500000>;
+				clock-frequency = <156250000>;
+				clock-output-names = "si570_mgt";
 			};
 		};
 		i2c@4 {
@@ -440,4 +527,5 @@
 /* ULPI SMSC USB3320 */
 &usb0 {
 	status = "okay";
+	dr_mode = "host";
 };
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
index 3c731e73903a..26d926eb1431 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
@@ -2,7 +2,7 @@
 /*
  * dts file for Xilinx ZynqMP
  *
- * (C) Copyright 2014 - 2015, Xilinx, Inc.
+ * (C) Copyright 2014 - 2019, Xilinx, Inc.
  *
  * Michal Simek <michal.simek@xilinx.com>
  *
@@ -12,6 +12,8 @@
  * the License, or (at your option) any later version.
  */
 
+#include <dt-bindings/power/xlnx-zynqmp-power.h>
+
 / {
 	compatible = "xlnx,zynqmp";
 	#address-cells = <2>;
@@ -118,8 +120,31 @@
 	firmware {
 		zynqmp_firmware: zynqmp-firmware {
 			compatible = "xlnx,zynqmp-firmware";
+			#power-domain-cells = <1>;
 			method = "smc";
 
+			zynqmp_power: zynqmp-power {
+				compatible = "xlnx,zynqmp-power";
+				interrupt-parent = <&gic>;
+				interrupts = <0 35 4>;
+			};
+
+			zynqmp_clk: clock-controller {
+				u-boot,dm-pre-reloc;
+				#clock-cells = <1>;
+				compatible = "xlnx,zynqmp-clk";
+				clocks = <&pss_ref_clk>,
+					 <&video_clk>,
+					 <&pss_alt_ref_clk>,
+					 <&aux_ref_clk>,
+					 <&gt_crx_ref_clk>;
+				clock-names = "pss_ref_clk",
+					      "video_clk",
+					      "pss_alt_ref_clk",
+					      "aux_ref_clk",
+					      "gt_crx_ref_clk";
+			};
+
 			nvmem_firmware {
 				compatible = "xlnx,zynqmp-nvmem-fw";
 				#address-cells = <1>;
@@ -187,6 +212,7 @@
 			interrupt-parent = <&gic>;
 			tx-fifo-depth = <0x40>;
 			rx-fifo-depth = <0x40>;
+			power-domains = <&zynqmp_firmware PD_CAN_0>;
 		};
 
 		can1: can@ff070000 {
@@ -198,6 +224,7 @@
 			interrupt-parent = <&gic>;
 			tx-fifo-depth = <0x40>;
 			rx-fifo-depth = <0x40>;
+			power-domains = <&zynqmp_firmware PD_CAN_1>;
 		};
 
 		cci: cci@fd6e0000 {
@@ -228,6 +255,7 @@
 			interrupts = <0 124 4>;
 			clock-names = "clk_main", "clk_apb";
 			xlnx,bus-width = <128>;
+			power-domains = <&zynqmp_firmware PD_GDMA>;
 		};
 
 		fpd_dma_chan2: dma@fd510000 {
@@ -238,6 +266,7 @@
 			interrupts = <0 125 4>;
 			clock-names = "clk_main", "clk_apb";
 			xlnx,bus-width = <128>;
+			power-domains = <&zynqmp_firmware PD_GDMA>;
 		};
 
 		fpd_dma_chan3: dma@fd520000 {
@@ -248,6 +277,7 @@
 			interrupts = <0 126 4>;
 			clock-names = "clk_main", "clk_apb";
 			xlnx,bus-width = <128>;
+			power-domains = <&zynqmp_firmware PD_GDMA>;
 		};
 
 		fpd_dma_chan4: dma@fd530000 {
@@ -258,6 +288,7 @@
 			interrupts = <0 127 4>;
 			clock-names = "clk_main", "clk_apb";
 			xlnx,bus-width = <128>;
+			power-domains = <&zynqmp_firmware PD_GDMA>;
 		};
 
 		fpd_dma_chan5: dma@fd540000 {
@@ -268,6 +299,7 @@
 			interrupts = <0 128 4>;
 			clock-names = "clk_main", "clk_apb";
 			xlnx,bus-width = <128>;
+			power-domains = <&zynqmp_firmware PD_GDMA>;
 		};
 
 		fpd_dma_chan6: dma@fd550000 {
@@ -278,6 +310,7 @@
 			interrupts = <0 129 4>;
 			clock-names = "clk_main", "clk_apb";
 			xlnx,bus-width = <128>;
+			power-domains = <&zynqmp_firmware PD_GDMA>;
 		};
 
 		fpd_dma_chan7: dma@fd560000 {
@@ -288,6 +321,7 @@
 			interrupts = <0 130 4>;
 			clock-names = "clk_main", "clk_apb";
 			xlnx,bus-width = <128>;
+			power-domains = <&zynqmp_firmware PD_GDMA>;
 		};
 
 		fpd_dma_chan8: dma@fd570000 {
@@ -298,6 +332,7 @@
 			interrupts = <0 131 4>;
 			clock-names = "clk_main", "clk_apb";
 			xlnx,bus-width = <128>;
+			power-domains = <&zynqmp_firmware PD_GDMA>;
 		};
 
 		/* LPDDMA default allows only secured access. inorder to enable
@@ -312,6 +347,7 @@
 			interrupts = <0 77 4>;
 			clock-names = "clk_main", "clk_apb";
 			xlnx,bus-width = <64>;
+			power-domains = <&zynqmp_firmware PD_ADMA>;
 		};
 
 		lpd_dma_chan2: dma@ffa90000 {
@@ -322,6 +358,7 @@
 			interrupts = <0 78 4>;
 			clock-names = "clk_main", "clk_apb";
 			xlnx,bus-width = <64>;
+			power-domains = <&zynqmp_firmware PD_ADMA>;
 		};
 
 		lpd_dma_chan3: dma@ffaa0000 {
@@ -332,6 +369,7 @@
 			interrupts = <0 79 4>;
 			clock-names = "clk_main", "clk_apb";
 			xlnx,bus-width = <64>;
+			power-domains = <&zynqmp_firmware PD_ADMA>;
 		};
 
 		lpd_dma_chan4: dma@ffab0000 {
@@ -342,6 +380,7 @@
 			interrupts = <0 80 4>;
 			clock-names = "clk_main", "clk_apb";
 			xlnx,bus-width = <64>;
+			power-domains = <&zynqmp_firmware PD_ADMA>;
 		};
 
 		lpd_dma_chan5: dma@ffac0000 {
@@ -352,6 +391,7 @@
 			interrupts = <0 81 4>;
 			clock-names = "clk_main", "clk_apb";
 			xlnx,bus-width = <64>;
+			power-domains = <&zynqmp_firmware PD_ADMA>;
 		};
 
 		lpd_dma_chan6: dma@ffad0000 {
@@ -362,6 +402,7 @@
 			interrupts = <0 82 4>;
 			clock-names = "clk_main", "clk_apb";
 			xlnx,bus-width = <64>;
+			power-domains = <&zynqmp_firmware PD_ADMA>;
 		};
 
 		lpd_dma_chan7: dma@ffae0000 {
@@ -372,6 +413,7 @@
 			interrupts = <0 83 4>;
 			clock-names = "clk_main", "clk_apb";
 			xlnx,bus-width = <64>;
+			power-domains = <&zynqmp_firmware PD_ADMA>;
 		};
 
 		lpd_dma_chan8: dma@ffaf0000 {
@@ -382,6 +424,7 @@
 			interrupts = <0 84 4>;
 			clock-names = "clk_main", "clk_apb";
 			xlnx,bus-width = <64>;
+			power-domains = <&zynqmp_firmware PD_ADMA>;
 		};
 
 		mc: memory-controller@fd070000 {
@@ -400,6 +443,7 @@
 			clock-names = "pclk", "hclk", "tx_clk";
 			#address-cells = <1>;
 			#size-cells = <0>;
+			power-domains = <&zynqmp_firmware PD_ETH_0>;
 		};
 
 		gem1: ethernet@ff0c0000 {
@@ -411,6 +455,7 @@
 			clock-names = "pclk", "hclk", "tx_clk";
 			#address-cells = <1>;
 			#size-cells = <0>;
+			power-domains = <&zynqmp_firmware PD_ETH_1>;
 		};
 
 		gem2: ethernet@ff0d0000 {
@@ -422,6 +467,7 @@
 			clock-names = "pclk", "hclk", "tx_clk";
 			#address-cells = <1>;
 			#size-cells = <0>;
+			power-domains = <&zynqmp_firmware PD_ETH_2>;
 		};
 
 		gem3: ethernet@ff0e0000 {
@@ -433,6 +479,7 @@
 			clock-names = "pclk", "hclk", "tx_clk";
 			#address-cells = <1>;
 			#size-cells = <0>;
+			power-domains = <&zynqmp_firmware PD_ETH_3>;
 		};
 
 		gpio: gpio@ff0a0000 {
@@ -445,6 +492,7 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			reg = <0x0 0xff0a0000 0x0 0x1000>;
+			power-domains = <&zynqmp_firmware PD_GPIO>;
 		};
 
 		i2c0: i2c@ff020000 {
@@ -455,6 +503,7 @@
 			reg = <0x0 0xff020000 0x0 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			power-domains = <&zynqmp_firmware PD_I2C_0>;
 		};
 
 		i2c1: i2c@ff030000 {
@@ -465,6 +514,7 @@
 			reg = <0x0 0xff030000 0x0 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			power-domains = <&zynqmp_firmware PD_I2C_1>;
 		};
 
 		pcie: pcie@fd0e0000 {
@@ -496,6 +546,7 @@
 					<0x0 0x0 0x0 0x2 &pcie_intc 0x2>,
 					<0x0 0x0 0x0 0x3 &pcie_intc 0x3>,
 					<0x0 0x0 0x0 0x4 &pcie_intc 0x4>;
+			power-domains = <&zynqmp_firmware PD_PCIE>;
 			pcie_intc: legacy-interrupt-controller {
 				interrupt-controller;
 				#address-cells = <0>;
@@ -519,24 +570,31 @@
 			reg = <0x0 0xfd0c0000 0x0 0x2000>;
 			interrupt-parent = <&gic>;
 			interrupts = <0 133 4>;
+			power-domains = <&zynqmp_firmware PD_SATA>;
 		};
 
 		sdhci0: mmc@ff160000 {
-			compatible = "arasan,sdhci-8.9a";
+			compatible = "xlnx,zynqmp-8.9a", "arasan,sdhci-8.9a";
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 48 4>;
 			reg = <0x0 0xff160000 0x0 0x1000>;
 			clock-names = "clk_xin", "clk_ahb";
+			#clock-cells = <1>;
+			clock-output-names = "clk_out_sd0", "clk_in_sd0";
+			power-domains = <&zynqmp_firmware PD_SD_0>;
 		};
 
 		sdhci1: mmc@ff170000 {
-			compatible = "arasan,sdhci-8.9a";
+			compatible = "xlnx,zynqmp-8.9a", "arasan,sdhci-8.9a";
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 49 4>;
 			reg = <0x0 0xff170000 0x0 0x1000>;
 			clock-names = "clk_xin", "clk_ahb";
+			#clock-cells = <1>;
+			clock-output-names = "clk_out_sd1", "clk_in_sd1";
+			power-domains = <&zynqmp_firmware PD_SD_1>;
 		};
 
 		smmu: smmu@fd800000 {
@@ -561,6 +619,7 @@
 			clock-names = "ref_clk", "pclk";
 			#address-cells = <1>;
 			#size-cells = <0>;
+			power-domains = <&zynqmp_firmware PD_SPI_0>;
 		};
 
 		spi1: spi@ff050000 {
@@ -572,6 +631,7 @@
 			clock-names = "ref_clk", "pclk";
 			#address-cells = <1>;
 			#size-cells = <0>;
+			power-domains = <&zynqmp_firmware PD_SPI_1>;
 		};
 
 		ttc0: timer@ff110000 {
@@ -581,6 +641,7 @@
 			interrupts = <0 36 4>, <0 37 4>, <0 38 4>;
 			reg = <0x0 0xff110000 0x0 0x1000>;
 			timer-width = <32>;
+			power-domains = <&zynqmp_firmware PD_TTC_0>;
 		};
 
 		ttc1: timer@ff120000 {
@@ -590,6 +651,7 @@
 			interrupts = <0 39 4>, <0 40 4>, <0 41 4>;
 			reg = <0x0 0xff120000 0x0 0x1000>;
 			timer-width = <32>;
+			power-domains = <&zynqmp_firmware PD_TTC_1>;
 		};
 
 		ttc2: timer@ff130000 {
@@ -599,6 +661,7 @@
 			interrupts = <0 42 4>, <0 43 4>, <0 44 4>;
 			reg = <0x0 0xff130000 0x0 0x1000>;
 			timer-width = <32>;
+			power-domains = <&zynqmp_firmware PD_TTC_2>;
 		};
 
 		ttc3: timer@ff140000 {
@@ -608,6 +671,7 @@
 			interrupts = <0 45 4>, <0 46 4>, <0 47 4>;
 			reg = <0x0 0xff140000 0x0 0x1000>;
 			timer-width = <32>;
+			power-domains = <&zynqmp_firmware PD_TTC_3>;
 		};
 
 		uart0: serial@ff000000 {
@@ -617,6 +681,7 @@
 			interrupts = <0 21 4>;
 			reg = <0x0 0xff000000 0x0 0x1000>;
 			clock-names = "uart_clk", "pclk";
+			power-domains = <&zynqmp_firmware PD_UART_0>;
 		};
 
 		uart1: serial@ff010000 {
@@ -626,6 +691,7 @@
 			interrupts = <0 22 4>;
 			reg = <0x0 0xff010000 0x0 0x1000>;
 			clock-names = "uart_clk", "pclk";
+			power-domains = <&zynqmp_firmware PD_UART_1>;
 		};
 
 		usb0: usb@fe200000 {
@@ -635,6 +701,7 @@
 			interrupts = <0 65 4>;
 			reg = <0x0 0xfe200000 0x0 0x40000>;
 			clock-names = "clk_xin", "clk_ahb";
+			power-domains = <&zynqmp_firmware PD_USB_0>;
 		};
 
 		usb1: usb@fe300000 {
@@ -644,6 +711,7 @@
 			interrupts = <0 70 4>;
 			reg = <0x0 0xfe300000 0x0 0x40000>;
 			clock-names = "clk_xin", "clk_ahb";
+			power-domains = <&zynqmp_firmware PD_USB_1>;
 		};
 
 		watchdog0: watchdog@fd4d0000 {
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index b2f667307f82..0f212889c931 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -86,6 +86,8 @@ CONFIG_ACPI_CPPC_CPUFREQ=m
 CONFIG_ARM_ARMADA_37XX_CPUFREQ=y
 CONFIG_ARM_SCPI_CPUFREQ=y
 CONFIG_ARM_IMX_CPUFREQ_DT=m
+CONFIG_ARM_QCOM_CPUFREQ_NVMEM=y
+CONFIG_ARM_QCOM_CPUFREQ_HW=y
 CONFIG_ARM_RASPBERRYPI_CPUFREQ=m
 CONFIG_ARM_TEGRA186_CPUFREQ=y
 CONFIG_ARM_SCPI_PROTOCOL=y
@@ -169,6 +171,7 @@ CONFIG_BT_HCIBTUSB=m
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_LL=y
 CONFIG_BT_HCIUART_BCM=y
+CONFIG_BT_HCIUART_QCA=y
 CONFIG_CFG80211=m
 CONFIG_MAC80211=m
 CONFIG_MAC80211_LEDS=y
@@ -190,6 +193,7 @@ CONFIG_PCIE_ALTERA_MSI=y
 CONFIG_PCI_HOST_THUNDER_PEM=y
 CONFIG_PCI_HOST_THUNDER_ECAM=y
 CONFIG_PCIE_ROCKCHIP_HOST=m
+CONFIG_PCIE_BRCMSTB=m
 CONFIG_PCI_LAYERSCAPE=y
 CONFIG_PCI_HISI=y
 CONFIG_PCIE_QCOM=y
@@ -252,6 +256,7 @@ CONFIG_VIRTIO_NET=y
 CONFIG_AMD_XGBE=y
 CONFIG_NET_XGENE=y
 CONFIG_ATL1C=m
+CONFIG_BCMGENET=m
 CONFIG_BNX2X=m
 CONFIG_MACB=y
 CONFIG_THUNDER_NIC_PF=y
@@ -299,6 +304,7 @@ CONFIG_USB_NET_PLUSB=m
 CONFIG_USB_NET_MCS7830=m
 CONFIG_ATH10K=m
 CONFIG_ATH10K_PCI=m
+CONFIG_ATH10K_SNOC=m
 CONFIG_BRCMFMAC=m
 CONFIG_MWIFIEX=m
 CONFIG_MWIFIEX_PCIE=m
@@ -350,6 +356,7 @@ CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
 CONFIG_SERIAL_FSL_LINFLEXUART=y
 CONFIG_SERIAL_FSL_LINFLEXUART_CONSOLE=y
 CONFIG_SERIAL_MVEBU_UART=y
+CONFIG_SERIAL_OWL=y
 CONFIG_SERIAL_DEV_BUS=y
 CONFIG_VIRTIO_CONSOLE=y
 CONFIG_IPMI_HANDLER=m
@@ -367,6 +374,7 @@ CONFIG_I2C_IMX=y
 CONFIG_I2C_IMX_LPI2C=y
 CONFIG_I2C_MESON=y
 CONFIG_I2C_MV64XXX=y
+CONFIG_I2C_OWL=y
 CONFIG_I2C_PXA=y
 CONFIG_I2C_QCOM_GENI=m
 CONFIG_I2C_QUP=y
@@ -387,13 +395,18 @@ CONFIG_SPI_MESON_SPIFC=m
 CONFIG_SPI_ORION=y
 CONFIG_SPI_PL022=y
 CONFIG_SPI_ROCKCHIP=y
+CONFIG_SPI_QCOM_QSPI=m
 CONFIG_SPI_QUP=y
+CONFIG_SPI_QCOM_GENI=m
 CONFIG_SPI_S3C64XX=y
 CONFIG_SPI_SUN6I=y
 CONFIG_SPI_SPIDEV=m
 CONFIG_SPMI=y
 CONFIG_PINCTRL_SINGLE=y
 CONFIG_PINCTRL_MAX77620=y
+CONFIG_PINCTRL_OWL=y
+CONFIG_PINCTRL_S700=y
+CONFIG_PINCTRL_S900=y
 CONFIG_PINCTRL_IMX8MM=y
 CONFIG_PINCTRL_IMX8MN=y
 CONFIG_PINCTRL_IMX8MQ=y
@@ -421,6 +434,7 @@ CONFIG_GPIO_PCA953X=y
 CONFIG_GPIO_PCA953X_IRQ=y
 CONFIG_GPIO_MAX77620=y
 CONFIG_POWER_AVS=y
+CONFIG_QCOM_CPR=y
 CONFIG_ROCKCHIP_IODOMAIN=y
 CONFIG_POWER_RESET_MSM=y
 CONFIG_POWER_RESET_XGENE=y
@@ -448,6 +462,7 @@ CONFIG_BRCMSTB_THERMAL=m
 CONFIG_EXYNOS_THERMAL=y
 CONFIG_TEGRA_BPMP_THERMAL=m
 CONFIG_QCOM_TSENS=y
+CONFIG_QCOM_SPMI_TEMP_ALARM=m
 CONFIG_UNIPHIER_THERMAL=y
 CONFIG_WATCHDOG=y
 CONFIG_ARM_SP805_WATCHDOG=y
@@ -458,6 +473,7 @@ CONFIG_IMX2_WDT=y
 CONFIG_IMX_SC_WDT=m
 CONFIG_MESON_GXBB_WATCHDOG=m
 CONFIG_MESON_WATCHDOG=m
+CONFIG_QCOM_WDT=m
 CONFIG_RENESAS_WDT=y
 CONFIG_UNIPHIER_WATCHDOG=y
 CONFIG_BCM2835_WDT=y
@@ -537,6 +553,7 @@ CONFIG_DRM_MSM=m
 CONFIG_DRM_TEGRA=m
 CONFIG_DRM_PANEL_SIMPLE=m
 CONFIG_DRM_SII902X=m
+CONFIG_DRM_TI_SN65DSI86=m
 CONFIG_DRM_I2C_ADV7511=m
 CONFIG_DRM_VC4=m
 CONFIG_DRM_ETNAVIV=m
@@ -578,6 +595,7 @@ CONFIG_SND_SIMPLE_CARD=m
 CONFIG_SND_AUDIO_GRAPH_CARD=m
 CONFIG_I2C_HID=m
 CONFIG_USB=y
+CONFIG_USB_CONN_GPIO=m
 CONFIG_USB_OTG=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_TEGRA=y
@@ -603,7 +621,10 @@ CONFIG_USB_ULPI=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_RENESAS_USBHS_UDC=m
 CONFIG_USB_RENESAS_USB3=m
+CONFIG_USB_TEGRA_XUDC=m
 CONFIG_TYPEC=m
+CONFIG_TYPEC_TCPM=m
+CONFIG_TYPEC_FUSB302=m
 CONFIG_TYPEC_HD3SS3220=m
 CONFIG_MMC=y
 CONFIG_MMC_BLOCK_MINORS=32
@@ -630,6 +651,7 @@ CONFIG_MMC_DW_ROCKCHIP=y
 CONFIG_MMC_SUNXI=y
 CONFIG_MMC_BCM2835=y
 CONFIG_MMC_SDHCI_XENON=y
+CONFIG_MMC_OWL=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
@@ -666,6 +688,7 @@ CONFIG_IMX_SDMA=y
 CONFIG_K3_DMA=y
 CONFIG_MV_XOR=y
 CONFIG_MV_XOR_V2=y
+CONFIG_OWL_DMA=y
 CONFIG_PL330_DMA=y
 CONFIG_TEGRA20_APB_DMA=y
 CONFIG_QCOM_BAM_DMA=y
@@ -692,6 +715,7 @@ CONFIG_COMMON_CLK_PWM=y
 CONFIG_CLK_RASPBERRYPI=m
 CONFIG_CLK_IMX8MM=y
 CONFIG_CLK_IMX8MN=y
+CONFIG_CLK_IMX8MP=y
 CONFIG_CLK_IMX8MQ=y
 CONFIG_CLK_IMX8QXP=y
 CONFIG_TI_SCI_CLK=y
@@ -708,6 +732,7 @@ CONFIG_MSM_GCC_8998=y
 CONFIG_QCS_GCC_404=y
 CONFIG_SDM_GCC_845=y
 CONFIG_SM_GCC_8150=y
+CONFIG_QCOM_HFPLL=y
 CONFIG_HWSPINLOCK=y
 CONFIG_HWSPINLOCK_QCOM=y
 CONFIG_ARM_MHU=y
@@ -727,15 +752,21 @@ CONFIG_QCOM_SYSMON=m
 CONFIG_RPMSG_QCOM_GLINK_RPM=y
 CONFIG_RPMSG_QCOM_GLINK_SMEM=m
 CONFIG_RPMSG_QCOM_SMD=y
+CONFIG_OWL_PM_DOMAINS=y
 CONFIG_RASPBERRYPI_POWER=y
 CONFIG_IMX_SCU_SOC=y
+CONFIG_QCOM_AOSS_QMP=y
+CONFIG_QCOM_COMMAND_DB=y
 CONFIG_QCOM_GENI_SE=y
 CONFIG_QCOM_GLINK_SSR=m
+CONFIG_QCOM_RMTFS_MEM=m
 CONFIG_QCOM_RPMH=y
+CONFIG_QCOM_RPMHPD=y
 CONFIG_QCOM_SMEM=y
 CONFIG_QCOM_SMD_RPM=y
 CONFIG_QCOM_SMP2P=y
 CONFIG_QCOM_SMSM=y
+CONFIG_QCOM_SOCINFO=m
 CONFIG_ARCH_R8A774A1=y
 CONFIG_ARCH_R8A774B1=y
 CONFIG_ARCH_R8A774C0=y
@@ -747,6 +778,7 @@ CONFIG_ARCH_R8A77970=y
 CONFIG_ARCH_R8A77980=y
 CONFIG_ARCH_R8A77990=y
 CONFIG_ARCH_R8A77995=y
+CONFIG_QCOM_PDC=y
 CONFIG_ROCKCHIP_PM_DOMAINS=y
 CONFIG_ARCH_TEGRA_132_SOC=y
 CONFIG_ARCH_TEGRA_210_SOC=y
@@ -760,6 +792,7 @@ CONFIG_EXTCON_USBC_CROS_EC=y
 CONFIG_MEMORY=y
 CONFIG_IIO=y
 CONFIG_EXYNOS_ADC=y
+CONFIG_QCOM_SPMI_ADC5=m
 CONFIG_ROCKCHIP_SARADC=m
 CONFIG_IIO_CROS_EC_SENSORS_CORE=m
 CONFIG_IIO_CROS_EC_SENSORS=m
@@ -776,6 +809,8 @@ CONFIG_PWM_ROCKCHIP=y
 CONFIG_PWM_SAMSUNG=y
 CONFIG_PWM_SUN4I=m
 CONFIG_PWM_TEGRA=m
+CONFIG_RESET_QCOM_AOSS=y
+CONFIG_RESET_QCOM_PDC=m
 CONFIG_RESET_TI_SCI=y
 CONFIG_PHY_XGENE=y
 CONFIG_PHY_SUN4I_USB=y
@@ -846,7 +881,10 @@ CONFIG_SECURITY=y
 CONFIG_CRYPTO_ECHAINIV=y
 CONFIG_CRYPTO_ANSI_CPRNG=y
 CONFIG_CRYPTO_DEV_SUN8I_CE=m
+CONFIG_CRYPTO_DEV_FSL_CAAM=m
 CONFIG_CRYPTO_DEV_HISI_ZIP=m
+CONFIG_CRYPTO_USER_API_RNG=m
+CONFIG_CRYPTO_DEV_QCOM_RNG=m
 CONFIG_CMA_SIZE_MBYTES=32
 CONFIG_PRINTK_TIME=y
 CONFIG_DEBUG_INFO=y
diff --git a/arch/arm64/include/asm/Kbuild b/arch/arm64/include/asm/Kbuild
index bd23f87d6c55..d3077c991962 100644
--- a/arch/arm64/include/asm/Kbuild
+++ b/arch/arm64/include/asm/Kbuild
@@ -3,7 +3,6 @@ generic-y += bugs.h
 generic-y += delay.h
 generic-y += div64.h
 generic-y += dma.h
-generic-y += dma-contiguous.h
 generic-y += dma-mapping.h
 generic-y += early_ioremap.h
 generic-y += emergency-restart.h
diff --git a/arch/arm64/include/asm/compat.h b/arch/arm64/include/asm/compat.h
index b0d53a265f1d..935d2aa231bf 100644
--- a/arch/arm64/include/asm/compat.h
+++ b/arch/arm64/include/asm/compat.h
@@ -4,6 +4,9 @@
  */
 #ifndef __ASM_COMPAT_H
 #define __ASM_COMPAT_H
+
+#include <asm-generic/compat.h>
+
 #ifdef CONFIG_COMPAT
 
 /*
@@ -13,8 +16,6 @@
 #include <linux/sched.h>
 #include <linux/sched/task_stack.h>
 
-#include <asm-generic/compat.h>
-
 #define COMPAT_USER_HZ		100
 #ifdef __AARCH64EB__
 #define COMPAT_UTS_MACHINE	"armv8b\0\0"
@@ -113,23 +114,6 @@ typedef u32		compat_sigset_word;
 
 #define COMPAT_OFF_T_MAX	0x7fffffff
 
-/*
- * A pointer passed in from user mode. This should not
- * be used for syscall parameters, just declare them
- * as pointers because the syscall entry code will have
- * appropriately converted them already.
- */
-
-static inline void __user *compat_ptr(compat_uptr_t uptr)
-{
-	return (void __user *)(unsigned long)uptr;
-}
-
-static inline compat_uptr_t ptr_to_compat(void __user *uptr)
-{
-	return (u32)(unsigned long)uptr;
-}
-
 #define compat_user_stack_pointer() (user_stack_pointer(task_pt_regs(current)))
 #define COMPAT_MINSIGSTKSZ	2048
 
diff --git a/arch/arm64/include/asm/kvm_emulate.h b/arch/arm64/include/asm/kvm_emulate.h
index 5efe5ca8fecf..688c63412cc2 100644
--- a/arch/arm64/include/asm/kvm_emulate.h
+++ b/arch/arm64/include/asm/kvm_emulate.h
@@ -17,7 +17,6 @@
 #include <asm/esr.h>
 #include <asm/kvm_arm.h>
 #include <asm/kvm_hyp.h>
-#include <asm/kvm_mmio.h>
 #include <asm/ptrace.h>
 #include <asm/cputype.h>
 #include <asm/virt.h>
@@ -219,6 +218,38 @@ static inline void vcpu_write_spsr(struct kvm_vcpu *vcpu, unsigned long v)
 		vcpu_gp_regs(vcpu)->spsr[KVM_SPSR_EL1] = v;
 }
 
+/*
+ * The layout of SPSR for an AArch32 state is different when observed from an
+ * AArch64 SPSR_ELx or an AArch32 SPSR_*. This function generates the AArch32
+ * view given an AArch64 view.
+ *
+ * In ARM DDI 0487E.a see:
+ *
+ * - The AArch64 view (SPSR_EL2) in section C5.2.18, page C5-426
+ * - The AArch32 view (SPSR_abt) in section G8.2.126, page G8-6256
+ * - The AArch32 view (SPSR_und) in section G8.2.132, page G8-6280
+ *
+ * Which show the following differences:
+ *
+ * | Bit | AA64 | AA32 | Notes                       |
+ * +-----+------+------+-----------------------------|
+ * | 24  | DIT  | J    | J is RES0 in ARMv8          |
+ * | 21  | SS   | DIT  | SS doesn't exist in AArch32 |
+ *
+ * ... and all other bits are (currently) common.
+ */
+static inline unsigned long host_spsr_to_spsr32(unsigned long spsr)
+{
+	const unsigned long overlap = BIT(24) | BIT(21);
+	unsigned long dit = !!(spsr & PSR_AA32_DIT_BIT);
+
+	spsr &= ~overlap;
+
+	spsr |= dit << 21;
+
+	return spsr;
+}
+
 static inline bool vcpu_mode_priv(const struct kvm_vcpu *vcpu)
 {
 	u32 mode;
@@ -283,6 +314,11 @@ static inline bool kvm_vcpu_dabt_issext(const struct kvm_vcpu *vcpu)
 	return !!(kvm_vcpu_get_hsr(vcpu) & ESR_ELx_SSE);
 }
 
+static inline bool kvm_vcpu_dabt_issf(const struct kvm_vcpu *vcpu)
+{
+	return !!(kvm_vcpu_get_hsr(vcpu) & ESR_ELx_SF);
+}
+
 static inline int kvm_vcpu_dabt_get_rd(const struct kvm_vcpu *vcpu)
 {
 	return (kvm_vcpu_get_hsr(vcpu) & ESR_ELx_SRT_MASK) >> ESR_ELx_SRT_SHIFT;
@@ -304,7 +340,7 @@ static inline bool kvm_vcpu_dabt_is_cm(const struct kvm_vcpu *vcpu)
 	return !!(kvm_vcpu_get_hsr(vcpu) & ESR_ELx_CM);
 }
 
-static inline int kvm_vcpu_dabt_get_as(const struct kvm_vcpu *vcpu)
+static inline unsigned int kvm_vcpu_dabt_get_as(const struct kvm_vcpu *vcpu)
 {
 	return 1 << ((kvm_vcpu_get_hsr(vcpu) & ESR_ELx_SAS) >> ESR_ELx_SAS_SHIFT);
 }
diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
index f5acdde17f3b..d87aa609d2b6 100644
--- a/arch/arm64/include/asm/kvm_host.h
+++ b/arch/arm64/include/asm/kvm_host.h
@@ -24,7 +24,6 @@
 #include <asm/fpsimd.h>
 #include <asm/kvm.h>
 #include <asm/kvm_asm.h>
-#include <asm/kvm_mmio.h>
 #include <asm/thread_info.h>
 
 #define __KVM_HAVE_ARCH_INTC_INITIALIZED
@@ -53,7 +52,7 @@ int kvm_arm_init_sve(void);
 
 int __attribute_const__ kvm_target_cpu(void);
 int kvm_reset_vcpu(struct kvm_vcpu *vcpu);
-void kvm_arch_vcpu_uninit(struct kvm_vcpu *vcpu);
+void kvm_arm_vcpu_destroy(struct kvm_vcpu *vcpu);
 int kvm_arch_vm_ioctl_check_extension(struct kvm *kvm, long ext);
 void __extended_idmap_trampoline(phys_addr_t boot_pgd, phys_addr_t idmap_start);
 
@@ -325,9 +324,6 @@ struct kvm_vcpu_arch {
 	/* Don't run the guest (internal implementation need) */
 	bool pause;
 
-	/* IO related fields */
-	struct kvm_decode mmio_decode;
-
 	/* Cache some mmu pages needed inside spinlock regions */
 	struct kvm_mmu_memory_cache mmu_page_cache;
 
@@ -446,8 +442,6 @@ int kvm_set_spte_hva(struct kvm *kvm, unsigned long hva, pte_t pte);
 int kvm_age_hva(struct kvm *kvm, unsigned long start, unsigned long end);
 int kvm_test_age_hva(struct kvm *kvm, unsigned long hva);
 
-struct kvm_vcpu *kvm_arm_get_running_vcpu(void);
-struct kvm_vcpu * __percpu *kvm_get_running_vcpus(void);
 void kvm_arm_halt_guest(struct kvm *kvm);
 void kvm_arm_resume_guest(struct kvm *kvm);
 
@@ -491,6 +485,14 @@ int handle_exit(struct kvm_vcpu *vcpu, struct kvm_run *run,
 void handle_exit_early(struct kvm_vcpu *vcpu, struct kvm_run *run,
 		       int exception_index);
 
+/* MMIO helpers */
+void kvm_mmio_write_buf(void *buf, unsigned int len, unsigned long data);
+unsigned long kvm_mmio_read_buf(const void *buf, unsigned int len);
+
+int kvm_handle_mmio_return(struct kvm_vcpu *vcpu, struct kvm_run *run);
+int io_mem_abort(struct kvm_vcpu *vcpu, struct kvm_run *run,
+		 phys_addr_t fault_ipa);
+
 int kvm_perf_init(void);
 int kvm_perf_teardown(void);
 
diff --git a/arch/arm64/include/asm/kvm_mmio.h b/arch/arm64/include/asm/kvm_mmio.h
deleted file mode 100644
index 02b5c48fd467..000000000000
--- a/arch/arm64/include/asm/kvm_mmio.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2012 - Virtual Open Systems and Columbia University
- * Author: Christoffer Dall <c.dall@virtualopensystems.com>
- */
-
-#ifndef __ARM64_KVM_MMIO_H__
-#define __ARM64_KVM_MMIO_H__
-
-#include <linux/kvm_host.h>
-#include <asm/kvm_arm.h>
-
-/*
- * This is annoying. The mmio code requires this, even if we don't
- * need any decoding. To be fixed.
- */
-struct kvm_decode {
-	unsigned long rt;
-	bool sign_extend;
-};
-
-void kvm_mmio_write_buf(void *buf, unsigned int len, unsigned long data);
-unsigned long kvm_mmio_read_buf(const void *buf, unsigned int len);
-
-int kvm_handle_mmio_return(struct kvm_vcpu *vcpu, struct kvm_run *run);
-int io_mem_abort(struct kvm_vcpu *vcpu, struct kvm_run *run,
-		 phys_addr_t fault_ipa);
-
-#endif	/* __ARM64_KVM_MMIO_H__ */
diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h
index cd5de0e40bfa..538c85e62f86 100644
--- a/arch/arm64/include/asm/pgtable.h
+++ b/arch/arm64/include/asm/pgtable.h
@@ -441,6 +441,7 @@ extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
 				 PMD_TYPE_TABLE)
 #define pmd_sect(pmd)		((pmd_val(pmd) & PMD_TYPE_MASK) == \
 				 PMD_TYPE_SECT)
+#define pmd_leaf(pmd)		pmd_sect(pmd)
 
 #if defined(CONFIG_ARM64_64K_PAGES) || CONFIG_PGTABLE_LEVELS < 3
 static inline bool pud_sect(pud_t pud) { return false; }
@@ -525,6 +526,7 @@ static inline void pte_unmap(pte_t *pte) { }
 #define pud_none(pud)		(!pud_val(pud))
 #define pud_bad(pud)		(!(pud_val(pud) & PUD_TABLE_BIT))
 #define pud_present(pud)	pte_present(pud_pte(pud))
+#define pud_leaf(pud)		pud_sect(pud)
 #define pud_valid(pud)		pte_valid(pud_pte(pud))
 
 static inline void set_pud(pud_t *pudp, pud_t pud)
diff --git a/arch/arm64/include/asm/ptdump.h b/arch/arm64/include/asm/ptdump.h
index 0b8e7269ec82..38187f74e089 100644
--- a/arch/arm64/include/asm/ptdump.h
+++ b/arch/arm64/include/asm/ptdump.h
@@ -5,7 +5,7 @@
 #ifndef __ASM_PTDUMP_H
 #define __ASM_PTDUMP_H
 
-#ifdef CONFIG_ARM64_PTDUMP_CORE
+#ifdef CONFIG_PTDUMP_CORE
 
 #include <linux/mm_types.h>
 #include <linux/seq_file.h>
@@ -21,15 +21,15 @@ struct ptdump_info {
 	unsigned long			base_addr;
 };
 
-void ptdump_walk_pgd(struct seq_file *s, struct ptdump_info *info);
-#ifdef CONFIG_ARM64_PTDUMP_DEBUGFS
+void ptdump_walk(struct seq_file *s, struct ptdump_info *info);
+#ifdef CONFIG_PTDUMP_DEBUGFS
 void ptdump_debugfs_register(struct ptdump_info *info, const char *name);
 #else
 static inline void ptdump_debugfs_register(struct ptdump_info *info,
 					   const char *name) { }
 #endif
 void ptdump_check_wx(void);
-#endif /* CONFIG_ARM64_PTDUMP_CORE */
+#endif /* CONFIG_PTDUMP_CORE */
 
 #ifdef CONFIG_DEBUG_WX
 #define debug_checkwx()	ptdump_check_wx()
diff --git a/arch/arm64/include/asm/ptrace.h b/arch/arm64/include/asm/ptrace.h
index fbebb411ae20..bf57308fcd63 100644
--- a/arch/arm64/include/asm/ptrace.h
+++ b/arch/arm64/include/asm/ptrace.h
@@ -62,6 +62,7 @@
 #define PSR_AA32_I_BIT		0x00000080
 #define PSR_AA32_A_BIT		0x00000100
 #define PSR_AA32_E_BIT		0x00000200
+#define PSR_AA32_PAN_BIT	0x00400000
 #define PSR_AA32_SSBS_BIT	0x00800000
 #define PSR_AA32_DIT_BIT	0x01000000
 #define PSR_AA32_Q_BIT		0x08000000
diff --git a/arch/arm64/include/asm/unistd.h b/arch/arm64/include/asm/unistd.h
index 5af82587909e..1dd22da1c3a9 100644
--- a/arch/arm64/include/asm/unistd.h
+++ b/arch/arm64/include/asm/unistd.h
@@ -38,7 +38,7 @@
 #define __ARM_NR_compat_set_tls		(__ARM_NR_COMPAT_BASE + 5)
 #define __ARM_NR_COMPAT_END		(__ARM_NR_COMPAT_BASE + 0x800)
 
-#define __NR_compat_syscalls		436
+#define __NR_compat_syscalls		439
 #endif
 
 #define __ARCH_WANT_SYS_CLONE
diff --git a/arch/arm64/include/asm/unistd32.h b/arch/arm64/include/asm/unistd32.h
index 94ab29cf4f00..c1c61635f89c 100644
--- a/arch/arm64/include/asm/unistd32.h
+++ b/arch/arm64/include/asm/unistd32.h
@@ -879,6 +879,10 @@ __SYSCALL(__NR_fspick, sys_fspick)
 __SYSCALL(__NR_pidfd_open, sys_pidfd_open)
 #define __NR_clone3 435
 __SYSCALL(__NR_clone3, sys_clone3)
+#define __NR_openat2 437
+__SYSCALL(__NR_openat2, sys_openat2)
+#define __NR_pidfd_getfd 438
+__SYSCALL(__NR_pidfd_getfd, sys_pidfd_getfd)
 
 /*
  * Please add new compat syscalls above this comment and update
diff --git a/arch/arm64/include/uapi/asm/kvm.h b/arch/arm64/include/uapi/asm/kvm.h
index 820e5751ada7..ba85bb23f060 100644
--- a/arch/arm64/include/uapi/asm/kvm.h
+++ b/arch/arm64/include/uapi/asm/kvm.h
@@ -220,10 +220,18 @@ struct kvm_vcpu_events {
 #define KVM_REG_ARM_PTIMER_CVAL		ARM64_SYS_REG(3, 3, 14, 2, 2)
 #define KVM_REG_ARM_PTIMER_CNT		ARM64_SYS_REG(3, 3, 14, 0, 1)
 
-/* EL0 Virtual Timer Registers */
+/*
+ * EL0 Virtual Timer Registers
+ *
+ * WARNING:
+ *      KVM_REG_ARM_TIMER_CVAL and KVM_REG_ARM_TIMER_CNT are not defined
+ *      with the appropriate register encodings.  Their values have been
+ *      accidentally swapped.  As this is set API, the definitions here
+ *      must be used, rather than ones derived from the encodings.
+ */
 #define KVM_REG_ARM_TIMER_CTL		ARM64_SYS_REG(3, 3, 14, 3, 1)
-#define KVM_REG_ARM_TIMER_CNT		ARM64_SYS_REG(3, 3, 14, 3, 2)
 #define KVM_REG_ARM_TIMER_CVAL		ARM64_SYS_REG(3, 3, 14, 0, 2)
+#define KVM_REG_ARM_TIMER_CNT		ARM64_SYS_REG(3, 3, 14, 3, 2)
 
 /* KVM-as-firmware specific pseudo-registers */
 #define KVM_REG_ARM_FW			(0x0014 << KVM_REG_ARM_COPROC_SHIFT)
diff --git a/arch/arm64/include/uapi/asm/ptrace.h b/arch/arm64/include/uapi/asm/ptrace.h
index 7ed9294e2004..d1bb5b69f1ce 100644
--- a/arch/arm64/include/uapi/asm/ptrace.h
+++ b/arch/arm64/include/uapi/asm/ptrace.h
@@ -49,6 +49,7 @@
 #define PSR_SSBS_BIT	0x00001000
 #define PSR_PAN_BIT	0x00400000
 #define PSR_UAO_BIT	0x00800000
+#define PSR_DIT_BIT	0x01000000
 #define PSR_V_BIT	0x10000000
 #define PSR_C_BIT	0x20000000
 #define PSR_Z_BIT	0x40000000
diff --git a/arch/arm64/kernel/setup.c b/arch/arm64/kernel/setup.c
index b6f9455d7ca3..a34890bf309f 100644
--- a/arch/arm64/kernel/setup.c
+++ b/arch/arm64/kernel/setup.c
@@ -360,9 +360,6 @@ void __init setup_arch(char **cmdline_p)
 	init_task.thread_info.ttbr0 = __pa_symbol(empty_zero_page);
 #endif
 
-#ifdef CONFIG_VT
-	conswitchp = &dummy_con;
-#endif
 	if (boot_args[1] || boot_args[2] || boot_args[3]) {
 		pr_err("WARNING: x1-x3 nonzero in violation of boot protocol:\n"
 			"\tx1: %016llx\n\tx2: %016llx\n\tx3: %016llx\n"
diff --git a/arch/arm64/kvm/debug.c b/arch/arm64/kvm/debug.c
index 43487f035385..7a7e425616b5 100644
--- a/arch/arm64/kvm/debug.c
+++ b/arch/arm64/kvm/debug.c
@@ -101,7 +101,7 @@ void kvm_arm_reset_debug_ptr(struct kvm_vcpu *vcpu)
 void kvm_arm_setup_debug(struct kvm_vcpu *vcpu)
 {
 	bool trap_debug = !(vcpu->arch.flags & KVM_ARM64_DEBUG_DIRTY);
-	unsigned long mdscr;
+	unsigned long mdscr, orig_mdcr_el2 = vcpu->arch.mdcr_el2;
 
 	trace_kvm_arm_setup_debug(vcpu, vcpu->guest_debug);
 
@@ -197,6 +197,10 @@ void kvm_arm_setup_debug(struct kvm_vcpu *vcpu)
 	if (vcpu_read_sys_reg(vcpu, MDSCR_EL1) & (DBG_MDSCR_KDE | DBG_MDSCR_MDE))
 		vcpu->arch.flags |= KVM_ARM64_DEBUG_DIRTY;
 
+	/* Write mdcr_el2 changes since vcpu_load on VHE systems */
+	if (has_vhe() && orig_mdcr_el2 != vcpu->arch.mdcr_el2)
+		write_sysreg(vcpu->arch.mdcr_el2, mdcr_el2);
+
 	trace_kvm_arm_set_dreg32("MDCR_EL2", vcpu->arch.mdcr_el2);
 	trace_kvm_arm_set_dreg32("MDSCR_EL1", vcpu_read_sys_reg(vcpu, MDSCR_EL1));
 }
diff --git a/arch/arm64/kvm/guest.c b/arch/arm64/kvm/guest.c
index 2fff06114a8f..2bd92301d32f 100644
--- a/arch/arm64/kvm/guest.c
+++ b/arch/arm64/kvm/guest.c
@@ -47,11 +47,6 @@ struct kvm_stats_debugfs_item debugfs_entries[] = {
 	{ NULL }
 };
 
-int kvm_arch_vcpu_setup(struct kvm_vcpu *vcpu)
-{
-	return 0;
-}
-
 static bool core_reg_offset_is_vreg(u64 off)
 {
 	return off >= KVM_REG_ARM_CORE_REG(fp_regs.vregs) &&
diff --git a/arch/arm64/kvm/hyp/entry.S b/arch/arm64/kvm/hyp/entry.S
index 0c6832ec52b1..d22d0534dd60 100644
--- a/arch/arm64/kvm/hyp/entry.S
+++ b/arch/arm64/kvm/hyp/entry.S
@@ -51,7 +51,7 @@
  * u64 __guest_enter(struct kvm_vcpu *vcpu,
  *		     struct kvm_cpu_context *host_ctxt);
  */
-ENTRY(__guest_enter)
+SYM_FUNC_START(__guest_enter)
 	// x0: vcpu
 	// x1: host context
 	// x2-x17: clobbered by macros
@@ -100,9 +100,8 @@ alternative_else_nop_endif
 	// Do not touch any register after this!
 	eret
 	sb
-ENDPROC(__guest_enter)
 
-ENTRY(__guest_exit)
+SYM_INNER_LABEL(__guest_exit, SYM_L_GLOBAL)
 	// x0: return code
 	// x1: vcpu
 	// x2-x29,lr: vcpu regs
@@ -195,4 +194,4 @@ abort_guest_exit_end:
 	msr	spsr_el2, x4
 	orr	x0, x0, x5
 1:	ret
-ENDPROC(__guest_exit)
+SYM_FUNC_END(__guest_enter)
diff --git a/arch/arm64/kvm/inject_fault.c b/arch/arm64/kvm/inject_fault.c
index ccdb6a051ab2..6aafc2825c1c 100644
--- a/arch/arm64/kvm/inject_fault.c
+++ b/arch/arm64/kvm/inject_fault.c
@@ -14,9 +14,6 @@
 #include <asm/kvm_emulate.h>
 #include <asm/esr.h>
 
-#define PSTATE_FAULT_BITS_64 	(PSR_MODE_EL1h | PSR_A_BIT | PSR_F_BIT | \
-				 PSR_I_BIT | PSR_D_BIT)
-
 #define CURRENT_EL_SP_EL0_VECTOR	0x0
 #define CURRENT_EL_SP_ELx_VECTOR	0x200
 #define LOWER_EL_AArch64_VECTOR		0x400
@@ -50,6 +47,69 @@ static u64 get_except_vector(struct kvm_vcpu *vcpu, enum exception_type type)
 	return vcpu_read_sys_reg(vcpu, VBAR_EL1) + exc_offset + type;
 }
 
+/*
+ * When an exception is taken, most PSTATE fields are left unchanged in the
+ * handler. However, some are explicitly overridden (e.g. M[4:0]). Luckily all
+ * of the inherited bits have the same position in the AArch64/AArch32 SPSR_ELx
+ * layouts, so we don't need to shuffle these for exceptions from AArch32 EL0.
+ *
+ * For the SPSR_ELx layout for AArch64, see ARM DDI 0487E.a page C5-429.
+ * For the SPSR_ELx layout for AArch32, see ARM DDI 0487E.a page C5-426.
+ *
+ * Here we manipulate the fields in order of the AArch64 SPSR_ELx layout, from
+ * MSB to LSB.
+ */
+static unsigned long get_except64_pstate(struct kvm_vcpu *vcpu)
+{
+	unsigned long sctlr = vcpu_read_sys_reg(vcpu, SCTLR_EL1);
+	unsigned long old, new;
+
+	old = *vcpu_cpsr(vcpu);
+	new = 0;
+
+	new |= (old & PSR_N_BIT);
+	new |= (old & PSR_Z_BIT);
+	new |= (old & PSR_C_BIT);
+	new |= (old & PSR_V_BIT);
+
+	// TODO: TCO (if/when ARMv8.5-MemTag is exposed to guests)
+
+	new |= (old & PSR_DIT_BIT);
+
+	// PSTATE.UAO is set to zero upon any exception to AArch64
+	// See ARM DDI 0487E.a, page D5-2579.
+
+	// PSTATE.PAN is unchanged unless SCTLR_ELx.SPAN == 0b0
+	// SCTLR_ELx.SPAN is RES1 when ARMv8.1-PAN is not implemented
+	// See ARM DDI 0487E.a, page D5-2578.
+	new |= (old & PSR_PAN_BIT);
+	if (!(sctlr & SCTLR_EL1_SPAN))
+		new |= PSR_PAN_BIT;
+
+	// PSTATE.SS is set to zero upon any exception to AArch64
+	// See ARM DDI 0487E.a, page D2-2452.
+
+	// PSTATE.IL is set to zero upon any exception to AArch64
+	// See ARM DDI 0487E.a, page D1-2306.
+
+	// PSTATE.SSBS is set to SCTLR_ELx.DSSBS upon any exception to AArch64
+	// See ARM DDI 0487E.a, page D13-3258
+	if (sctlr & SCTLR_ELx_DSSBS)
+		new |= PSR_SSBS_BIT;
+
+	// PSTATE.BTYPE is set to zero upon any exception to AArch64
+	// See ARM DDI 0487E.a, pages D1-2293 to D1-2294.
+
+	new |= PSR_D_BIT;
+	new |= PSR_A_BIT;
+	new |= PSR_I_BIT;
+	new |= PSR_F_BIT;
+
+	new |= PSR_MODE_EL1h;
+
+	return new;
+}
+
 static void inject_abt64(struct kvm_vcpu *vcpu, bool is_iabt, unsigned long addr)
 {
 	unsigned long cpsr = *vcpu_cpsr(vcpu);
@@ -59,7 +119,7 @@ static void inject_abt64(struct kvm_vcpu *vcpu, bool is_iabt, unsigned long addr
 	vcpu_write_elr_el1(vcpu, *vcpu_pc(vcpu));
 	*vcpu_pc(vcpu) = get_except_vector(vcpu, except_type_sync);
 
-	*vcpu_cpsr(vcpu) = PSTATE_FAULT_BITS_64;
+	*vcpu_cpsr(vcpu) = get_except64_pstate(vcpu);
 	vcpu_write_spsr(vcpu, cpsr);
 
 	vcpu_write_sys_reg(vcpu, addr, FAR_EL1);
@@ -94,7 +154,7 @@ static void inject_undef64(struct kvm_vcpu *vcpu)
 	vcpu_write_elr_el1(vcpu, *vcpu_pc(vcpu));
 	*vcpu_pc(vcpu) = get_except_vector(vcpu, except_type_sync);
 
-	*vcpu_cpsr(vcpu) = PSTATE_FAULT_BITS_64;
+	*vcpu_cpsr(vcpu) = get_except64_pstate(vcpu);
 	vcpu_write_spsr(vcpu, cpsr);
 
 	/*
diff --git a/arch/arm64/kvm/reset.c b/arch/arm64/kvm/reset.c
index f4a8ae918827..30b7ea680f66 100644
--- a/arch/arm64/kvm/reset.c
+++ b/arch/arm64/kvm/reset.c
@@ -204,7 +204,7 @@ bool kvm_arm_vcpu_is_finalized(struct kvm_vcpu *vcpu)
 	return true;
 }
 
-void kvm_arch_vcpu_uninit(struct kvm_vcpu *vcpu)
+void kvm_arm_vcpu_destroy(struct kvm_vcpu *vcpu)
 {
 	kfree(vcpu->arch.sve_state);
 }
diff --git a/arch/arm64/kvm/va_layout.c b/arch/arm64/kvm/va_layout.c
index dab1fea4752a..a4f48c1ac28c 100644
--- a/arch/arm64/kvm/va_layout.c
+++ b/arch/arm64/kvm/va_layout.c
@@ -13,52 +13,46 @@
 #include <asm/kvm_mmu.h>
 
 /*
- * The LSB of the random hyp VA tag or 0 if no randomization is used.
+ * The LSB of the HYP VA tag
  */
 static u8 tag_lsb;
 /*
- * The random hyp VA tag value with the region bit if hyp randomization is used
+ * The HYP VA tag value with the region bit
  */
 static u64 tag_val;
 static u64 va_mask;
 
+/*
+ * We want to generate a hyp VA with the following format (with V ==
+ * vabits_actual):
+ *
+ *  63 ... V |     V-1    | V-2 .. tag_lsb | tag_lsb - 1 .. 0
+ *  ---------------------------------------------------------
+ * | 0000000 | hyp_va_msb |   random tag   |  kern linear VA |
+ *           |--------- tag_val -----------|----- va_mask ---|
+ *
+ * which does not conflict with the idmap regions.
+ */
 __init void kvm_compute_layout(void)
 {
 	phys_addr_t idmap_addr = __pa_symbol(__hyp_idmap_text_start);
 	u64 hyp_va_msb;
-	int kva_msb;
 
 	/* Where is my RAM region? */
 	hyp_va_msb  = idmap_addr & BIT(vabits_actual - 1);
 	hyp_va_msb ^= BIT(vabits_actual - 1);
 
-	kva_msb = fls64((u64)phys_to_virt(memblock_start_of_DRAM()) ^
+	tag_lsb = fls64((u64)phys_to_virt(memblock_start_of_DRAM()) ^
 			(u64)(high_memory - 1));
 
-	if (kva_msb == (vabits_actual - 1)) {
-		/*
-		 * No space in the address, let's compute the mask so
-		 * that it covers (vabits_actual - 1) bits, and the region
-		 * bit. The tag stays set to zero.
-		 */
-		va_mask  = BIT(vabits_actual - 1) - 1;
-		va_mask |= hyp_va_msb;
-	} else {
-		/*
-		 * We do have some free bits to insert a random tag.
-		 * Hyp VAs are now created from kernel linear map VAs
-		 * using the following formula (with V == vabits_actual):
-		 *
-		 *  63 ... V |     V-1    | V-2 .. tag_lsb | tag_lsb - 1 .. 0
-		 *  ---------------------------------------------------------
-		 * | 0000000 | hyp_va_msb |    random tag  |  kern linear VA |
-		 */
-		tag_lsb = kva_msb;
-		va_mask = GENMASK_ULL(tag_lsb - 1, 0);
-		tag_val = get_random_long() & GENMASK_ULL(vabits_actual - 2, tag_lsb);
-		tag_val |= hyp_va_msb;
-		tag_val >>= tag_lsb;
+	va_mask = GENMASK_ULL(tag_lsb - 1, 0);
+	tag_val = hyp_va_msb;
+
+	if (tag_lsb != (vabits_actual - 1)) {
+		/* We have some free bits to insert a random tag. */
+		tag_val |= get_random_long() & GENMASK_ULL(vabits_actual - 2, tag_lsb);
 	}
+	tag_val >>= tag_lsb;
 }
 
 static u32 compute_instruction(int n, u32 rd, u32 rn)
@@ -117,11 +111,11 @@ void __init kvm_update_va_mask(struct alt_instr *alt,
 		 * VHE doesn't need any address translation, let's NOP
 		 * everything.
 		 *
-		 * Alternatively, if we don't have any spare bits in
-		 * the address, NOP everything after masking that
-		 * kernel VA.
+		 * Alternatively, if the tag is zero (because the layout
+		 * dictates it and we don't have any spare bits in the
+		 * address), NOP everything after masking the kernel VA.
 		 */
-		if (has_vhe() || (!tag_lsb && i > 0)) {
+		if (has_vhe() || (!tag_val && i > 0)) {
 			updptr[i] = cpu_to_le32(aarch64_insn_gen_nop());
 			continue;
 		}
diff --git a/arch/arm64/mm/Makefile b/arch/arm64/mm/Makefile
index 849c1df3d214..d91030f0ffee 100644
--- a/arch/arm64/mm/Makefile
+++ b/arch/arm64/mm/Makefile
@@ -4,8 +4,8 @@ obj-y				:= dma-mapping.o extable.o fault.o init.o \
 				   ioremap.o mmap.o pgd.o mmu.o \
 				   context.o proc.o pageattr.o
 obj-$(CONFIG_HUGETLB_PAGE)	+= hugetlbpage.o
-obj-$(CONFIG_ARM64_PTDUMP_CORE)	+= dump.o
-obj-$(CONFIG_ARM64_PTDUMP_DEBUGFS)	+= ptdump_debugfs.o
+obj-$(CONFIG_PTDUMP_CORE)	+= dump.o
+obj-$(CONFIG_PTDUMP_DEBUGFS)	+= ptdump_debugfs.o
 obj-$(CONFIG_NUMA)		+= numa.o
 obj-$(CONFIG_DEBUG_VIRTUAL)	+= physaddr.o
 KASAN_SANITIZE_physaddr.o	+= n
diff --git a/arch/arm64/mm/dump.c b/arch/arm64/mm/dump.c
index 0a920b538a89..860c00ec8bd3 100644
--- a/arch/arm64/mm/dump.c
+++ b/arch/arm64/mm/dump.c
@@ -15,6 +15,7 @@
 #include <linux/io.h>
 #include <linux/init.h>
 #include <linux/mm.h>
+#include <linux/ptdump.h>
 #include <linux/sched.h>
 #include <linux/seq_file.h>
 
@@ -75,10 +76,11 @@ static struct addr_marker address_markers[] = {
  * dumps out a description of the range.
  */
 struct pg_state {
+	struct ptdump_state ptdump;
 	struct seq_file *seq;
 	const struct addr_marker *marker;
 	unsigned long start_address;
-	unsigned level;
+	int level;
 	u64 current_prot;
 	bool check_wx;
 	unsigned long wx_pages;
@@ -174,11 +176,14 @@ struct pg_level {
 };
 
 static struct pg_level pg_level[] = {
-	{
-	}, { /* pgd */
+	{ /* pgd */
 		.name	= "PGD",
 		.bits	= pte_bits,
 		.num	= ARRAY_SIZE(pte_bits),
+	}, { /* p4d */
+		.name	= "P4D",
+		.bits	= pte_bits,
+		.num	= ARRAY_SIZE(pte_bits),
 	}, { /* pud */
 		.name	= (CONFIG_PGTABLE_LEVELS > 3) ? "PUD" : "PGD",
 		.bits	= pte_bits,
@@ -241,13 +246,17 @@ static void note_prot_wx(struct pg_state *st, unsigned long addr)
 	st->wx_pages += (addr - st->start_address) / PAGE_SIZE;
 }
 
-static void note_page(struct pg_state *st, unsigned long addr, unsigned level,
-				u64 val)
+static void note_page(struct ptdump_state *pt_st, unsigned long addr, int level,
+		      unsigned long val)
 {
+	struct pg_state *st = container_of(pt_st, struct pg_state, ptdump);
 	static const char units[] = "KMGTPE";
-	u64 prot = val & pg_level[level].mask;
+	u64 prot = 0;
+
+	if (level >= 0)
+		prot = val & pg_level[level].mask;
 
-	if (!st->level) {
+	if (st->level == -1) {
 		st->level = level;
 		st->current_prot = prot;
 		st->start_address = addr;
@@ -260,21 +269,22 @@ static void note_page(struct pg_state *st, unsigned long addr, unsigned level,
 		if (st->current_prot) {
 			note_prot_uxn(st, addr);
 			note_prot_wx(st, addr);
-			pt_dump_seq_printf(st->seq, "0x%016lx-0x%016lx   ",
+		}
+
+		pt_dump_seq_printf(st->seq, "0x%016lx-0x%016lx   ",
 				   st->start_address, addr);
 
-			delta = (addr - st->start_address) >> 10;
-			while (!(delta & 1023) && unit[1]) {
-				delta >>= 10;
-				unit++;
-			}
-			pt_dump_seq_printf(st->seq, "%9lu%c %s", delta, *unit,
-				   pg_level[st->level].name);
-			if (pg_level[st->level].bits)
-				dump_prot(st, pg_level[st->level].bits,
-					  pg_level[st->level].num);
-			pt_dump_seq_puts(st->seq, "\n");
+		delta = (addr - st->start_address) >> 10;
+		while (!(delta & 1023) && unit[1]) {
+			delta >>= 10;
+			unit++;
 		}
+		pt_dump_seq_printf(st->seq, "%9lu%c %s", delta, *unit,
+				   pg_level[st->level].name);
+		if (st->current_prot && pg_level[st->level].bits)
+			dump_prot(st, pg_level[st->level].bits,
+				  pg_level[st->level].num);
+		pt_dump_seq_puts(st->seq, "\n");
 
 		if (addr >= st->marker[1].start_address) {
 			st->marker++;
@@ -293,85 +303,27 @@ static void note_page(struct pg_state *st, unsigned long addr, unsigned level,
 
 }
 
-static void walk_pte(struct pg_state *st, pmd_t *pmdp, unsigned long start,
-		     unsigned long end)
-{
-	unsigned long addr = start;
-	pte_t *ptep = pte_offset_kernel(pmdp, start);
-
-	do {
-		note_page(st, addr, 4, READ_ONCE(pte_val(*ptep)));
-	} while (ptep++, addr += PAGE_SIZE, addr != end);
-}
-
-static void walk_pmd(struct pg_state *st, pud_t *pudp, unsigned long start,
-		     unsigned long end)
-{
-	unsigned long next, addr = start;
-	pmd_t *pmdp = pmd_offset(pudp, start);
-
-	do {
-		pmd_t pmd = READ_ONCE(*pmdp);
-		next = pmd_addr_end(addr, end);
-
-		if (pmd_none(pmd) || pmd_sect(pmd)) {
-			note_page(st, addr, 3, pmd_val(pmd));
-		} else {
-			BUG_ON(pmd_bad(pmd));
-			walk_pte(st, pmdp, addr, next);
-		}
-	} while (pmdp++, addr = next, addr != end);
-}
-
-static void walk_pud(struct pg_state *st, pgd_t *pgdp, unsigned long start,
-		     unsigned long end)
+void ptdump_walk(struct seq_file *s, struct ptdump_info *info)
 {
-	unsigned long next, addr = start;
-	pud_t *pudp = pud_offset(pgdp, start);
-
-	do {
-		pud_t pud = READ_ONCE(*pudp);
-		next = pud_addr_end(addr, end);
-
-		if (pud_none(pud) || pud_sect(pud)) {
-			note_page(st, addr, 2, pud_val(pud));
-		} else {
-			BUG_ON(pud_bad(pud));
-			walk_pmd(st, pudp, addr, next);
-		}
-	} while (pudp++, addr = next, addr != end);
-}
+	unsigned long end = ~0UL;
+	struct pg_state st;
 
-static void walk_pgd(struct pg_state *st, struct mm_struct *mm,
-		     unsigned long start)
-{
-	unsigned long end = (start < TASK_SIZE_64) ? TASK_SIZE_64 : 0;
-	unsigned long next, addr = start;
-	pgd_t *pgdp = pgd_offset(mm, start);
-
-	do {
-		pgd_t pgd = READ_ONCE(*pgdp);
-		next = pgd_addr_end(addr, end);
-
-		if (pgd_none(pgd)) {
-			note_page(st, addr, 1, pgd_val(pgd));
-		} else {
-			BUG_ON(pgd_bad(pgd));
-			walk_pud(st, pgdp, addr, next);
-		}
-	} while (pgdp++, addr = next, addr != end);
-}
+	if (info->base_addr < TASK_SIZE_64)
+		end = TASK_SIZE_64;
 
-void ptdump_walk_pgd(struct seq_file *m, struct ptdump_info *info)
-{
-	struct pg_state st = {
-		.seq = m,
+	st = (struct pg_state){
+		.seq = s,
 		.marker = info->markers,
+		.ptdump = {
+			.note_page = note_page,
+			.range = (struct ptdump_range[]){
+				{info->base_addr, end},
+				{0, 0}
+			}
+		}
 	};
 
-	walk_pgd(&st, info->mm, info->base_addr);
-
-	note_page(&st, 0, 0, 0);
+	ptdump_walk_pgd(&st.ptdump, info->mm, NULL);
 }
 
 static void ptdump_initialize(void)
@@ -398,11 +350,19 @@ void ptdump_check_wx(void)
 			{ 0, NULL},
 			{ -1, NULL},
 		},
+		.level = -1,
 		.check_wx = true,
+		.ptdump = {
+			.note_page = note_page,
+			.range = (struct ptdump_range[]) {
+				{PAGE_OFFSET, ~0UL},
+				{0, 0}
+			}
+		}
 	};
 
-	walk_pgd(&st, &init_mm, PAGE_OFFSET);
-	note_page(&st, 0, 0, 0);
+	ptdump_walk_pgd(&st.ptdump, &init_mm, NULL);
+
 	if (st.wx_pages || st.uxn_pages)
 		pr_warn("Checked W+X mappings: FAILED, %lu W+X pages found, %lu non-UXN pages found\n",
 			st.wx_pages, st.uxn_pages);
diff --git a/arch/arm64/mm/mmu.c b/arch/arm64/mm/mmu.c
index 40797cbfba2d..128f70852bf3 100644
--- a/arch/arm64/mm/mmu.c
+++ b/arch/arm64/mm/mmu.c
@@ -943,13 +943,13 @@ int __init arch_ioremap_pud_supported(void)
 	 * SW table walks can't handle removal of intermediate entries.
 	 */
 	return IS_ENABLED(CONFIG_ARM64_4K_PAGES) &&
-	       !IS_ENABLED(CONFIG_ARM64_PTDUMP_DEBUGFS);
+	       !IS_ENABLED(CONFIG_PTDUMP_DEBUGFS);
 }
 
 int __init arch_ioremap_pmd_supported(void)
 {
 	/* See arch_ioremap_pud_supported() */
-	return !IS_ENABLED(CONFIG_ARM64_PTDUMP_DEBUGFS);
+	return !IS_ENABLED(CONFIG_PTDUMP_DEBUGFS);
 }
 
 int pud_set_huge(pud_t *pudp, phys_addr_t phys, pgprot_t prot)
diff --git a/arch/arm64/mm/ptdump_debugfs.c b/arch/arm64/mm/ptdump_debugfs.c
index 064163f25592..1f2eae3e988b 100644
--- a/arch/arm64/mm/ptdump_debugfs.c
+++ b/arch/arm64/mm/ptdump_debugfs.c
@@ -7,7 +7,7 @@
 static int ptdump_show(struct seq_file *m, void *v)
 {
 	struct ptdump_info *info = m->private;
-	ptdump_walk_pgd(m, info);
+	ptdump_walk(m, info);
 	return 0;
 }
 DEFINE_SHOW_ATTRIBUTE(ptdump);
diff --git a/arch/csky/include/asm/Kbuild b/arch/csky/include/asm/Kbuild
index 4d4754e6bf89..bc15a26c782f 100644
--- a/arch/csky/include/asm/Kbuild
+++ b/arch/csky/include/asm/Kbuild
@@ -7,7 +7,6 @@ generic-y += delay.h
 generic-y += device.h
 generic-y += div64.h
 generic-y += dma.h
-generic-y += dma-contiguous.h
 generic-y += dma-mapping.h
 generic-y += emergency-restart.h
 generic-y += exec.h
diff --git a/arch/csky/kernel/setup.c b/arch/csky/kernel/setup.c
index 23ee604aafdb..52eaf31ba27f 100644
--- a/arch/csky/kernel/setup.c
+++ b/arch/csky/kernel/setup.c
@@ -136,10 +136,6 @@ void __init setup_arch(char **cmdline_p)
 #ifdef CONFIG_HIGHMEM
 	kmap_init();
 #endif
-
-#if defined(CONFIG_VT) && defined(CONFIG_DUMMY_CONSOLE)
-	conswitchp = &dummy_con;
-#endif
 }
 
 unsigned long va_pa_offset;
diff --git a/arch/ia64/kernel/salinfo.c b/arch/ia64/kernel/salinfo.c
index b392c0a50346..a25ab9b37953 100644
--- a/arch/ia64/kernel/salinfo.c
+++ b/arch/ia64/kernel/salinfo.c
@@ -331,10 +331,10 @@ retry:
 	return size;
 }
 
-static const struct file_operations salinfo_event_fops = {
-	.open  = salinfo_event_open,
-	.read  = salinfo_event_read,
-	.llseek = noop_llseek,
+static const struct proc_ops salinfo_event_proc_ops = {
+	.proc_open	= salinfo_event_open,
+	.proc_read	= salinfo_event_read,
+	.proc_lseek	= noop_llseek,
 };
 
 static int
@@ -534,12 +534,12 @@ salinfo_log_write(struct file *file, const char __user *buffer, size_t count, lo
 	return count;
 }
 
-static const struct file_operations salinfo_data_fops = {
-	.open    = salinfo_log_open,
-	.release = salinfo_log_release,
-	.read    = salinfo_log_read,
-	.write   = salinfo_log_write,
-	.llseek  = default_llseek,
+static const struct proc_ops salinfo_data_proc_ops = {
+	.proc_open	= salinfo_log_open,
+	.proc_release	= salinfo_log_release,
+	.proc_read	= salinfo_log_read,
+	.proc_write	= salinfo_log_write,
+	.proc_lseek	= default_llseek,
 };
 
 static int salinfo_cpu_online(unsigned int cpu)
@@ -617,13 +617,13 @@ salinfo_init(void)
 			continue;
 
 		entry = proc_create_data("event", S_IRUSR, dir,
-					 &salinfo_event_fops, data);
+					 &salinfo_event_proc_ops, data);
 		if (!entry)
 			continue;
 		*sdir++ = entry;
 
 		entry = proc_create_data("data", S_IRUSR | S_IWUSR, dir,
-					 &salinfo_data_fops, data);
+					 &salinfo_data_proc_ops, data);
 		if (!entry)
 			continue;
 		*sdir++ = entry;
diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c
index c49fcef754de..4009383453f7 100644
--- a/arch/ia64/kernel/setup.c
+++ b/arch/ia64/kernel/setup.c
@@ -608,9 +608,6 @@ setup_arch (char **cmdline_p)
 
 #ifdef CONFIG_VT
 	if (!conswitchp) {
-# if defined(CONFIG_DUMMY_CONSOLE)
-		conswitchp = &dummy_con;
-# endif
 # if defined(CONFIG_VGA_CONSOLE)
 		/*
 		 * Non-legacy systems may route legacy VGA MMIO range to system
diff --git a/arch/ia64/kernel/syscalls/syscall.tbl b/arch/ia64/kernel/syscalls/syscall.tbl
index 36d5faf4c86c..042911e670b8 100644
--- a/arch/ia64/kernel/syscalls/syscall.tbl
+++ b/arch/ia64/kernel/syscalls/syscall.tbl
@@ -356,3 +356,5 @@
 433	common	fspick				sys_fspick
 434	common	pidfd_open			sys_pidfd_open
 # 435 reserved for clone3
+437	common	openat2				sys_openat2
+438	common	pidfd_getfd			sys_pidfd_getfd
diff --git a/arch/m68k/configs/amcore_defconfig b/arch/m68k/configs/amcore_defconfig
index d5e683dd885d..3a84f24d41c8 100644
--- a/arch/m68k/configs/amcore_defconfig
+++ b/arch/m68k/configs/amcore_defconfig
@@ -13,7 +13,6 @@ CONFIG_EMBEDDED=y
 # CONFIG_SLUB_DEBUG is not set
 # CONFIG_COMPAT_BRK is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_CFQ is not set
 # CONFIG_MMU is not set
 CONFIG_M5307=y
 CONFIG_AMCORE=y
diff --git a/arch/m68k/configs/m5208evb_defconfig b/arch/m68k/configs/m5208evb_defconfig
index a3102ff7e5ed..0ee3079f6ca9 100644
--- a/arch/m68k/configs/m5208evb_defconfig
+++ b/arch/m68k/configs/m5208evb_defconfig
@@ -10,8 +10,6 @@ CONFIG_EXPERT=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 # CONFIG_COMPAT_BRK is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
 # CONFIG_MMU is not set
 # CONFIG_4KSTACKS is not set
 CONFIG_RAMBASE=0x40000000
diff --git a/arch/m68k/configs/m5249evb_defconfig b/arch/m68k/configs/m5249evb_defconfig
index f7bb9ed3efa8..f84f68c04065 100644
--- a/arch/m68k/configs/m5249evb_defconfig
+++ b/arch/m68k/configs/m5249evb_defconfig
@@ -10,8 +10,6 @@ CONFIG_EXPERT=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 # CONFIG_SLUB_DEBUG is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
 # CONFIG_MMU is not set
 CONFIG_M5249=y
 CONFIG_M5249C3=y
diff --git a/arch/m68k/configs/m5272c3_defconfig b/arch/m68k/configs/m5272c3_defconfig
index 1e679f6a400f..eca65020aae3 100644
--- a/arch/m68k/configs/m5272c3_defconfig
+++ b/arch/m68k/configs/m5272c3_defconfig
@@ -10,8 +10,6 @@ CONFIG_EXPERT=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 # CONFIG_SLUB_DEBUG is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
 # CONFIG_MMU is not set
 CONFIG_M5272=y
 CONFIG_M5272C3=y
diff --git a/arch/m68k/configs/m5275evb_defconfig b/arch/m68k/configs/m5275evb_defconfig
index d2987b40423e..9402c7a3e9c7 100644
--- a/arch/m68k/configs/m5275evb_defconfig
+++ b/arch/m68k/configs/m5275evb_defconfig
@@ -10,8 +10,6 @@ CONFIG_EXPERT=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 # CONFIG_SLUB_DEBUG is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
 # CONFIG_MMU is not set
 CONFIG_M5275=y
 # CONFIG_4KSTACKS is not set
diff --git a/arch/m68k/configs/m5307c3_defconfig b/arch/m68k/configs/m5307c3_defconfig
index 97a78c99eeee..bb8b0eb4bdfc 100644
--- a/arch/m68k/configs/m5307c3_defconfig
+++ b/arch/m68k/configs/m5307c3_defconfig
@@ -10,8 +10,6 @@ CONFIG_EXPERT=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 # CONFIG_SLUB_DEBUG is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
 # CONFIG_MMU is not set
 CONFIG_M5307=y
 CONFIG_M5307C3=y
diff --git a/arch/m68k/configs/m5407c3_defconfig b/arch/m68k/configs/m5407c3_defconfig
index 766a97f39a3a..ce9ccf13c7c0 100644
--- a/arch/m68k/configs/m5407c3_defconfig
+++ b/arch/m68k/configs/m5407c3_defconfig
@@ -11,8 +11,6 @@ CONFIG_EXPERT=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
 # CONFIG_MMU is not set
 CONFIG_M5407=y
 CONFIG_M5407C3=y
diff --git a/arch/m68k/configs/m5475evb_defconfig b/arch/m68k/configs/m5475evb_defconfig
index 579fd98afed6..93f7c7a07553 100644
--- a/arch/m68k/configs/m5475evb_defconfig
+++ b/arch/m68k/configs/m5475evb_defconfig
@@ -11,8 +11,6 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_EMBEDDED=y
 CONFIG_MODULES=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
 CONFIG_COLDFIRE=y
 # CONFIG_4KSTACKS is not set
 CONFIG_RAMBASE=0x0
diff --git a/arch/m68k/include/asm/uaccess_no.h b/arch/m68k/include/asm/uaccess_no.h
index 0134008bf539..6bc80c35726d 100644
--- a/arch/m68k/include/asm/uaccess_no.h
+++ b/arch/m68k/include/asm/uaccess_no.h
@@ -71,26 +71,29 @@ extern int __put_user_bad(void);
 #define get_user(x, ptr)					\
 ({								\
     int __gu_err = 0;						\
-    typeof(x) __gu_val = 0;					\
     switch (sizeof(*(ptr))) {					\
     case 1:							\
-	__get_user_asm(__gu_err, __gu_val, ptr, b, "=d");	\
+	__get_user_asm(__gu_err, x, ptr, b, "=d");		\
 	break;							\
     case 2:							\
-	__get_user_asm(__gu_err, __gu_val, ptr, w, "=r");	\
+	__get_user_asm(__gu_err, x, ptr, w, "=r");		\
 	break;							\
     case 4:							\
-	__get_user_asm(__gu_err, __gu_val, ptr, l, "=r");	\
+	__get_user_asm(__gu_err, x, ptr, l, "=r");		\
 	break;							\
-    case 8:							\
-	memcpy((void *) &__gu_val, ptr, sizeof (*(ptr)));	\
+    case 8: {							\
+	union {							\
+	    u64 l;						\
+	    __typeof__(*(ptr)) t;				\
+	} __gu_val;						\
+	memcpy(&__gu_val.l, ptr, sizeof(__gu_val.l));		\
+	(x) = __gu_val.t;					\
 	break;							\
+    }								\
     default:							\
-	__gu_val = 0;						\
 	__gu_err = __get_user_bad();				\
 	break;							\
     }								\
-    (x) = (typeof(*(ptr))) __gu_val;				\
     __gu_err;							\
 })
 #define __get_user(x, ptr) get_user(x, ptr)
diff --git a/arch/m68k/kernel/bootinfo_proc.c b/arch/m68k/kernel/bootinfo_proc.c
index 3b9cab84917d..857fa2aaa748 100644
--- a/arch/m68k/kernel/bootinfo_proc.c
+++ b/arch/m68k/kernel/bootinfo_proc.c
@@ -26,9 +26,9 @@ static ssize_t bootinfo_read(struct file *file, char __user *buf,
 				       bootinfo_size);
 }
 
-static const struct file_operations bootinfo_fops = {
-	.read = bootinfo_read,
-	.llseek = default_llseek,
+static const struct proc_ops bootinfo_proc_ops = {
+	.proc_read	= bootinfo_read,
+	.proc_lseek	= default_llseek,
 };
 
 void __init save_bootinfo(const struct bi_record *bi)
@@ -67,7 +67,7 @@ static int __init init_bootinfo_procfs(void)
 	if (!bootinfo_copy)
 		return -ENOMEM;
 
-	pde = proc_create_data("bootinfo", 0400, NULL, &bootinfo_fops, NULL);
+	pde = proc_create_data("bootinfo", 0400, NULL, &bootinfo_proc_ops, NULL);
 	if (!pde) {
 		kfree(bootinfo_copy);
 		return -ENOMEM;
diff --git a/arch/m68k/kernel/setup_mm.c b/arch/m68k/kernel/setup_mm.c
index 528484feff80..ab8aa7be260f 100644
--- a/arch/m68k/kernel/setup_mm.c
+++ b/arch/m68k/kernel/setup_mm.c
@@ -274,10 +274,6 @@ void __init setup_arch(char **cmdline_p)
 
 	parse_early_param();
 
-#ifdef CONFIG_DUMMY_CONSOLE
-	conswitchp = &dummy_con;
-#endif
-
 	switch (m68k_machtype) {
 #ifdef CONFIG_AMIGA
 	case MACH_AMIGA:
diff --git a/arch/m68k/kernel/setup_no.c b/arch/m68k/kernel/setup_no.c
index 3c5def10d486..a63483de7a42 100644
--- a/arch/m68k/kernel/setup_no.c
+++ b/arch/m68k/kernel/setup_no.c
@@ -146,10 +146,6 @@ void __init setup_arch(char **cmdline_p)
 	memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
 	boot_command_line[COMMAND_LINE_SIZE-1] = 0;
 
-#if defined(CONFIG_FRAMEBUFFER_CONSOLE) && defined(CONFIG_DUMMY_CONSOLE)
-	conswitchp = &dummy_con;
-#endif
-
 	/*
 	 * Give all the memory to the bootmap allocator, tell it to put the
 	 * boot mem_map at the start of memory.
diff --git a/arch/m68k/kernel/syscalls/syscall.tbl b/arch/m68k/kernel/syscalls/syscall.tbl
index a00a5d0db602..f4f49fcb76d0 100644
--- a/arch/m68k/kernel/syscalls/syscall.tbl
+++ b/arch/m68k/kernel/syscalls/syscall.tbl
@@ -435,3 +435,5 @@
 433	common	fspick				sys_fspick
 434	common	pidfd_open			sys_pidfd_open
 435	common	clone3				__sys_clone3
+437	common	openat2				sys_openat2
+438	common	pidfd_getfd			sys_pidfd_getfd
diff --git a/arch/m68k/sun3x/config.c b/arch/m68k/sun3x/config.c
index 03ce7f9facfe..d806dee71a9c 100644
--- a/arch/m68k/sun3x/config.c
+++ b/arch/m68k/sun3x/config.c
@@ -70,7 +70,6 @@ void __init config_sun3x(void)
 		break;
 	default:
 		serial_console = 0;
-		conswitchp = &dummy_con;
 		break;
 	}
 #endif
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index a105f113fd67..6a331bd57ea8 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -27,6 +27,7 @@ config MICROBLAZE
 	select HAVE_ARCH_HASH
 	select HAVE_ARCH_KGDB
 	select HAVE_DEBUG_KMEMLEAK
+	select HAVE_DMA_CONTIGUOUS
 	select HAVE_DYNAMIC_FTRACE
 	select HAVE_FTRACE_MCOUNT_RECORD
 	select HAVE_FUNCTION_GRAPH_TRACER
diff --git a/arch/microblaze/configs/mmu_defconfig b/arch/microblaze/configs/mmu_defconfig
index b3b433db89d8..9b8a50f30662 100644
--- a/arch/microblaze/configs/mmu_defconfig
+++ b/arch/microblaze/configs/mmu_defconfig
@@ -26,6 +26,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_PARTITION_ADVANCED=y
 # CONFIG_EFI_PARTITION is not set
+CONFIG_CMA=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -73,7 +74,7 @@ CONFIG_FB_XILINX=y
 CONFIG_UIO=y
 CONFIG_UIO_PDRV_GENIRQ=y
 CONFIG_UIO_DMEM_GENIRQ=y
-CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
 # CONFIG_DNOTIFY is not set
 CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
@@ -82,10 +83,11 @@ CONFIG_NFS_FS=y
 CONFIG_CIFS=y
 CONFIG_CIFS_STATS2=y
 CONFIG_ENCRYPTED_KEYS=y
+CONFIG_DMA_CMA=y
 CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_SLAB=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_DEBUG_SPINLOCK=y
 CONFIG_KGDB=y
 CONFIG_KGDB_TESTS=y
 CONFIG_KGDB_KDB=y
+CONFIG_DEBUG_SLAB=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEBUG_SPINLOCK=y
diff --git a/arch/microblaze/configs/nommu_defconfig b/arch/microblaze/configs/nommu_defconfig
index 377de39ccb8c..8c420782d6e4 100644
--- a/arch/microblaze/configs/nommu_defconfig
+++ b/arch/microblaze/configs/nommu_defconfig
@@ -70,7 +70,7 @@ CONFIG_XILINX_WATCHDOG=y
 CONFIG_FB=y
 CONFIG_FB_XILINX=y
 # CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
 # CONFIG_DNOTIFY is not set
 CONFIG_CRAMFS=y
 CONFIG_ROMFS_FS=y
diff --git a/arch/microblaze/kernel/cpu/cache.c b/arch/microblaze/kernel/cpu/cache.c
index 0bde47e4fa69..dcba53803fa5 100644
--- a/arch/microblaze/kernel/cpu/cache.c
+++ b/arch/microblaze/kernel/cpu/cache.c
@@ -92,7 +92,8 @@ static inline void __disable_dcache_nomsr(void)
 #define CACHE_LOOP_LIMITS(start, end, cache_line_length, cache_size)	\
 do {									\
 	int align = ~(cache_line_length - 1);				\
-	end = min(start + cache_size, end);				\
+	if (start <  UINT_MAX - cache_size)				\
+		end = min(start + cache_size, end);			\
 	start &= align;							\
 } while (0)
 
diff --git a/arch/microblaze/kernel/cpu/cpuinfo.c b/arch/microblaze/kernel/cpu/cpuinfo.c
index ef2f49471a2a..cd9b4450763b 100644
--- a/arch/microblaze/kernel/cpu/cpuinfo.c
+++ b/arch/microblaze/kernel/cpu/cpuinfo.c
@@ -51,6 +51,7 @@ const struct cpu_ver_key cpu_ver_lookup[] = {
 	{"9.5", 0x22},
 	{"9.6", 0x23},
 	{"10.0", 0x24},
+	{"11.0", 0x25},
 	{NULL, 0},
 };
 
diff --git a/arch/microblaze/kernel/head.S b/arch/microblaze/kernel/head.S
index 7d2894418691..14b276406153 100644
--- a/arch/microblaze/kernel/head.S
+++ b/arch/microblaze/kernel/head.S
@@ -121,10 +121,10 @@ no_fdt_arg:
 	tophys(r4,r4)			/* convert to phys address */
 	ori	r3, r0, COMMAND_LINE_SIZE - 1 /* number of loops */
 _copy_command_line:
-	/* r2=r5+r6 - r5 contain pointer to command line */
+	/* r2=r5+r11 - r5 contain pointer to command line */
 	lbu	r2, r5, r11
 	beqid	r2, skip		/* Skip if no data */
-	sb	r2, r4, r11		/* addr[r4+r6]= r2 */
+	sb	r2, r4, r11		/* addr[r4+r11]= r2 */
 	addik	r11, r11, 1		/* increment counting */
 	bgtid	r3, _copy_command_line	/* loop for all entries       */
 	addik	r3, r3, -1		/* decrement loop */
@@ -139,8 +139,8 @@ skip:
 	ori	r4, r0, TOPHYS(_bram_load_start)	/* save bram context */
 	ori	r3, r0, (LMB_SIZE - 4)
 _copy_bram:
-	lw	r7, r0, r11		/* r7 = r0 + r6 */
-	sw	r7, r4, r11		/* addr[r4 + r6] = r7 */
+	lw	r7, r0, r11		/* r7 = r0 + r11 */
+	sw	r7, r4, r11		/* addr[r4 + r11] = r7 */
 	addik	r11, r11, 4		/* increment counting */
 	bgtid	r3, _copy_bram		/* loop for all entries */
 	addik	r3, r3, -4		/* descrement loop */
diff --git a/arch/microblaze/kernel/setup.c b/arch/microblaze/kernel/setup.c
index 522a0c5d9c59..511c1ab7f57f 100644
--- a/arch/microblaze/kernel/setup.c
+++ b/arch/microblaze/kernel/setup.c
@@ -65,10 +65,6 @@ void __init setup_arch(char **cmdline_p)
 	microblaze_cache_init();
 
 	xilinx_pci_init();
-
-#if defined(CONFIG_DUMMY_CONSOLE)
-	conswitchp = &dummy_con;
-#endif
 }
 
 #ifdef CONFIG_MTD_UCLINUX
diff --git a/arch/microblaze/kernel/syscalls/syscall.tbl b/arch/microblaze/kernel/syscalls/syscall.tbl
index 09b0cd7dab0a..4c67b11f9c9e 100644
--- a/arch/microblaze/kernel/syscalls/syscall.tbl
+++ b/arch/microblaze/kernel/syscalls/syscall.tbl
@@ -441,3 +441,5 @@
 433	common	fspick				sys_fspick
 434	common	pidfd_open			sys_pidfd_open
 435	common	clone3				sys_clone3
+437	common	openat2				sys_openat2
+438	common	pidfd_getfd			sys_pidfd_getfd
diff --git a/arch/microblaze/mm/init.c b/arch/microblaze/mm/init.c
index 050fc621c920..1056f1674065 100644
--- a/arch/microblaze/mm/init.c
+++ b/arch/microblaze/mm/init.c
@@ -7,6 +7,7 @@
  * for more details.
  */
 
+#include <linux/dma-contiguous.h>
 #include <linux/memblock.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
@@ -345,6 +346,9 @@ asmlinkage void __init mmu_init(void)
 	/* This will also cause that unflatten device tree will be allocated
 	 * inside 768MB limit */
 	memblock_set_current_limit(memory_start + lowmem_size - 1);
+
+	/* CMA initialization */
+	dma_contiguous_reserve(memory_start + lowmem_size - 1);
 }
 
 /* This is only called until mem_init is done. */
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index a2739a34bb12..797d7f1ad5fe 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -5,9 +5,11 @@ config MIPS
 	select ARCH_32BIT_OFF_T if !64BIT
 	select ARCH_BINFMT_ELF_STATE if MIPS_FP_SUPPORT
 	select ARCH_CLOCKSOURCE_DATA
+	select ARCH_HAS_FORTIFY_SOURCE
+	select ARCH_HAS_KCOV
+	select ARCH_HAS_PTE_SPECIAL if !(32BIT && CPU_HAS_RIXI)
 	select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
 	select ARCH_HAS_UBSAN_SANITIZE_ALL
-	select ARCH_HAS_FORTIFY_SOURCE
 	select ARCH_SUPPORTS_UPROBES
 	select ARCH_USE_BUILTIN_BSWAP
 	select ARCH_USE_CMPXCHG_LOCKREF if 64BIT
@@ -47,7 +49,7 @@ config MIPS
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_ARCH_TRANSPARENT_HUGEPAGE if CPU_SUPPORTS_HUGEPAGES
 	select HAVE_ASM_MODVERSIONS
-	select HAVE_EBPF_JIT if 64BIT && !CPU_MICROMIPS && TARGET_ISA_REV >= 2
+	select HAVE_CBPF_JIT if !64BIT && !CPU_MICROMIPS
 	select HAVE_CONTEXT_TRACKING
 	select HAVE_COPY_THREAD_TLS
 	select HAVE_C_RECORDMCOUNT
@@ -55,11 +57,14 @@ config MIPS
 	select HAVE_DEBUG_STACKOVERFLOW
 	select HAVE_DMA_CONTIGUOUS
 	select HAVE_DYNAMIC_FTRACE
+	select HAVE_EBPF_JIT if 64BIT && !CPU_MICROMIPS && TARGET_ISA_REV >= 2
 	select HAVE_EXIT_THREAD
 	select HAVE_FAST_GUP
 	select HAVE_FTRACE_MCOUNT_RECORD
 	select HAVE_FUNCTION_GRAPH_TRACER
 	select HAVE_FUNCTION_TRACER
+	select HAVE_GCC_PLUGINS
+	select HAVE_GENERIC_VDSO
 	select HAVE_IDE
 	select HAVE_IOREMAP_PROT
 	select HAVE_IRQ_EXIT_ON_IRQ_STACK
@@ -78,18 +83,14 @@ config MIPS
 	select HAVE_STACKPROTECTOR
 	select HAVE_SYSCALL_TRACEPOINTS
 	select HAVE_VIRT_CPU_ACCOUNTING_GEN if 64BIT || !SMP
-	select HAVE_GENERIC_VDSO
 	select IRQ_FORCED_THREADING
 	select ISA if EISA
-	select MODULES_USE_ELF_RELA if MODULES && 64BIT
 	select MODULES_USE_ELF_REL if MODULES
+	select MODULES_USE_ELF_RELA if MODULES && 64BIT
 	select PERF_USE_VMALLOC
 	select RTC_LIB
 	select SYSCTL_EXCEPTION_TRACE
 	select VIRT_TO_BUS
-	select ARCH_HAS_PTE_SPECIAL if !(32BIT && CPU_HAS_RIXI)
-	select ARCH_HAS_KCOV
-	select HAVE_GCC_PLUGINS
 
 menu "Machine selection"
 
@@ -104,20 +105,18 @@ config MIPS_GENERIC
 	select CEVT_R4K
 	select CLKSRC_MIPS_GIC
 	select COMMON_CLK
-	select CPU_MIPSR2_IRQ_VI
 	select CPU_MIPSR2_IRQ_EI
+	select CPU_MIPSR2_IRQ_VI
 	select CSRC_R4K
 	select DMA_PERDEV_COHERENT
 	select HAVE_PCI
 	select IRQ_MIPS_CPU
-	select LIBFDT
 	select MIPS_AUTO_PFN_OFFSET
 	select MIPS_CPU_SCACHE
 	select MIPS_GIC
 	select MIPS_L1_CACHE_SHIFT_7
 	select NO_EXCEPT_FILL
 	select PCI_DRIVERS_GENERIC
-	select PINCTRL
 	select SMP_UP if SMP
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_MIPS32_R1
@@ -132,11 +131,12 @@ config MIPS_GENERIC
 	select SYS_SUPPORTS_HIGHMEM
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_SUPPORTS_MICROMIPS
-	select SYS_SUPPORTS_MIPS_CPS
 	select SYS_SUPPORTS_MIPS16
+	select SYS_SUPPORTS_MIPS_CPS
 	select SYS_SUPPORTS_MULTITHREADING
 	select SYS_SUPPORTS_RELOCATABLE
 	select SYS_SUPPORTS_SMARTMIPS
+	select UHI_BOOT
 	select USB_EHCI_BIG_ENDIAN_DESC if CPU_BIG_ENDIAN
 	select USB_EHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
 	select USB_OHCI_BIG_ENDIAN_DESC if CPU_BIG_ENDIAN
@@ -144,7 +144,6 @@ config MIPS_GENERIC
 	select USB_UHCI_BIG_ENDIAN_DESC if CPU_BIG_ENDIAN
 	select USB_UHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
 	select USE_OF
-	select UHI_BOOT
 	help
 	  Select this to build a kernel which aims to support multiple boards,
 	  generally using a flattened device tree passed from the bootloader
@@ -403,7 +402,6 @@ config MACH_INGENIC
 	select GENERIC_IRQ_CHIP
 	select BUILTIN_DTB if MIPS_NO_APPENDED_DTB
 	select USE_OF
-	select LIBFDT
 
 config LANTIQ
 	bool "Lantiq based platforms"
@@ -510,7 +508,6 @@ config MACH_PISTACHIO
 	select DMA_NONCOHERENT
 	select GPIOLIB
 	select IRQ_MIPS_CPU
-	select LIBFDT
 	select MFD_SYSCON
 	select MIPS_CPU_SCACHE
 	select MIPS_GIC
@@ -548,7 +545,6 @@ config MIPS_MALTA
 	select I8253
 	select I8259
 	select IRQ_MIPS_CPU
-	select LIBFDT
 	select MIPS_BONITO64
 	select MIPS_CPU_SCACHE
 	select MIPS_GIC
@@ -980,7 +976,6 @@ config CAVIUM_OCTEON_SOC
 	select ZONE_DMA32
 	select HOLES_IN_ZONE
 	select GPIOLIB
-	select LIBFDT
 	select USE_OF
 	select ARCH_SPARSEMEM_ENABLE
 	select SYS_SUPPORTS_SMP
@@ -1223,8 +1218,7 @@ config NO_IOPORT_MAP
 	def_bool n
 
 config GENERIC_CSUM
-	bool
-	default y if !CPU_HAS_LOAD_STORE_LR
+	def_bool CPU_NO_LOAD_STORE_LR
 
 config GENERIC_ISA_DMA
 	bool
@@ -1442,11 +1436,14 @@ config CPU_LOONGSON64
 	bool "Loongson 64-bit CPU"
 	depends on SYS_HAS_CPU_LOONGSON64
 	select ARCH_HAS_PHYS_TO_DMA
+	select CPU_MIPSR2
+	select CPU_HAS_PREFETCH
 	select CPU_SUPPORTS_64BIT_KERNEL
 	select CPU_SUPPORTS_HIGHMEM
 	select CPU_SUPPORTS_HUGEPAGES
 	select CPU_SUPPORTS_MSA
-	select CPU_HAS_LOAD_STORE_LR
+	select CPU_DIEI_BROKEN if !LOONGSON3_ENHANCEMENT
+	select CPU_MIPSR2_IRQ_VI
 	select WEAK_ORDERING
 	select WEAK_REORDERING_BEYOND_LLSC
 	select MIPS_ASID_BITS_VARIABLE
@@ -1464,8 +1461,6 @@ config CPU_LOONGSON64
 config LOONGSON3_ENHANCEMENT
 	bool "New Loongson-3 CPU Enhancements"
 	default n
-	select CPU_MIPSR2
-	select CPU_HAS_PREFETCH
 	depends on CPU_LOONGSON64
 	help
 	  New Loongson-3 cores (since Loongson-3A R2, as opposed to Loongson-3A
@@ -1542,7 +1537,6 @@ config CPU_MIPS32_R1
 	bool "MIPS32 Release 1"
 	depends on SYS_HAS_CPU_MIPS32_R1
 	select CPU_HAS_PREFETCH
-	select CPU_HAS_LOAD_STORE_LR
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_HIGHMEM
 	help
@@ -1560,7 +1554,6 @@ config CPU_MIPS32_R2
 	bool "MIPS32 Release 2"
 	depends on SYS_HAS_CPU_MIPS32_R2
 	select CPU_HAS_PREFETCH
-	select CPU_HAS_LOAD_STORE_LR
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_HIGHMEM
 	select CPU_SUPPORTS_MSA
@@ -1576,6 +1569,7 @@ config CPU_MIPS32_R6
 	bool "MIPS32 Release 6"
 	depends on SYS_HAS_CPU_MIPS32_R6
 	select CPU_HAS_PREFETCH
+	select CPU_NO_LOAD_STORE_LR
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_HIGHMEM
 	select CPU_SUPPORTS_MSA
@@ -1591,7 +1585,6 @@ config CPU_MIPS64_R1
 	bool "MIPS64 Release 1"
 	depends on SYS_HAS_CPU_MIPS64_R1
 	select CPU_HAS_PREFETCH
-	select CPU_HAS_LOAD_STORE_LR
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
 	select CPU_SUPPORTS_HIGHMEM
@@ -1611,7 +1604,6 @@ config CPU_MIPS64_R2
 	bool "MIPS64 Release 2"
 	depends on SYS_HAS_CPU_MIPS64_R2
 	select CPU_HAS_PREFETCH
-	select CPU_HAS_LOAD_STORE_LR
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
 	select CPU_SUPPORTS_HIGHMEM
@@ -1629,6 +1621,7 @@ config CPU_MIPS64_R6
 	bool "MIPS64 Release 6"
 	depends on SYS_HAS_CPU_MIPS64_R6
 	select CPU_HAS_PREFETCH
+	select CPU_NO_LOAD_STORE_LR
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
 	select CPU_SUPPORTS_HIGHMEM
@@ -1646,7 +1639,6 @@ config CPU_R3000
 	bool "R3000"
 	depends on SYS_HAS_CPU_R3000
 	select CPU_HAS_WB
-	select CPU_HAS_LOAD_STORE_LR
 	select CPU_R3K_TLB
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_HIGHMEM
@@ -1662,7 +1654,6 @@ config CPU_TX39XX
 	bool "R39XX"
 	depends on SYS_HAS_CPU_TX39XX
 	select CPU_SUPPORTS_32BIT_KERNEL
-	select CPU_HAS_LOAD_STORE_LR
 	select CPU_R3K_TLB
 
 config CPU_VR41XX
@@ -1670,7 +1661,6 @@ config CPU_VR41XX
 	depends on SYS_HAS_CPU_VR41XX
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
-	select CPU_HAS_LOAD_STORE_LR
 	help
 	  The options selects support for the NEC VR4100 series of processors.
 	  Only choose this option if you have one of these processors as a
@@ -1683,7 +1673,6 @@ config CPU_R4X00
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
 	select CPU_SUPPORTS_HUGEPAGES
-	select CPU_HAS_LOAD_STORE_LR
 	help
 	  MIPS Technologies R4000-series processors other than 4300, including
 	  the R4000, R4400, R4600, and 4700.
@@ -1692,7 +1681,6 @@ config CPU_TX49XX
 	bool "R49XX"
 	depends on SYS_HAS_CPU_TX49XX
 	select CPU_HAS_PREFETCH
-	select CPU_HAS_LOAD_STORE_LR
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
 	select CPU_SUPPORTS_HUGEPAGES
@@ -1703,7 +1691,6 @@ config CPU_R5000
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
 	select CPU_SUPPORTS_HUGEPAGES
-	select CPU_HAS_LOAD_STORE_LR
 	help
 	  MIPS Technologies R5000-series processors other than the Nevada.
 
@@ -1713,7 +1700,6 @@ config CPU_R5500
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
 	select CPU_SUPPORTS_HUGEPAGES
-	select CPU_HAS_LOAD_STORE_LR
 	help
 	  NEC VR5500 and VR5500A series processors implement 64-bit MIPS IV
 	  instruction set.
@@ -1724,7 +1710,6 @@ config CPU_NEVADA
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
 	select CPU_SUPPORTS_HUGEPAGES
-	select CPU_HAS_LOAD_STORE_LR
 	help
 	  QED / PMC-Sierra RM52xx-series ("Nevada") processors.
 
@@ -1732,7 +1717,6 @@ config CPU_R10000
 	bool "R10000"
 	depends on SYS_HAS_CPU_R10000
 	select CPU_HAS_PREFETCH
-	select CPU_HAS_LOAD_STORE_LR
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
 	select CPU_SUPPORTS_HIGHMEM
@@ -1744,7 +1728,6 @@ config CPU_RM7000
 	bool "RM7000"
 	depends on SYS_HAS_CPU_RM7000
 	select CPU_HAS_PREFETCH
-	select CPU_HAS_LOAD_STORE_LR
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
 	select CPU_SUPPORTS_HIGHMEM
@@ -1753,7 +1736,6 @@ config CPU_RM7000
 config CPU_SB1
 	bool "SB1"
 	depends on SYS_HAS_CPU_SB1
-	select CPU_HAS_LOAD_STORE_LR
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
 	select CPU_SUPPORTS_HIGHMEM
@@ -1764,7 +1746,6 @@ config CPU_CAVIUM_OCTEON
 	bool "Cavium Octeon processor"
 	depends on SYS_HAS_CPU_CAVIUM_OCTEON
 	select CPU_HAS_PREFETCH
-	select CPU_HAS_LOAD_STORE_LR
 	select CPU_SUPPORTS_64BIT_KERNEL
 	select WEAK_ORDERING
 	select CPU_SUPPORTS_HIGHMEM
@@ -1794,7 +1775,6 @@ config CPU_BMIPS
 	select WEAK_ORDERING
 	select CPU_SUPPORTS_HIGHMEM
 	select CPU_HAS_PREFETCH
-	select CPU_HAS_LOAD_STORE_LR
 	select CPU_SUPPORTS_CPUFREQ
 	select MIPS_EXTERNAL_TIMER
 	help
@@ -1803,7 +1783,6 @@ config CPU_BMIPS
 config CPU_XLR
 	bool "Netlogic XLR SoC"
 	depends on SYS_HAS_CPU_XLR
-	select CPU_HAS_LOAD_STORE_LR
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
 	select CPU_SUPPORTS_HIGHMEM
@@ -1822,7 +1801,6 @@ config CPU_XLP
 	select WEAK_ORDERING
 	select WEAK_REORDERING_BEYOND_LLSC
 	select CPU_HAS_PREFETCH
-	select CPU_HAS_LOAD_STORE_LR
 	select CPU_MIPSR2
 	select CPU_SUPPORTS_HUGEPAGES
 	select MIPS_ASID_BITS_VARIABLE
@@ -1928,14 +1906,12 @@ config CPU_LOONGSON2EF
 	select CPU_SUPPORTS_HIGHMEM
 	select CPU_SUPPORTS_HUGEPAGES
 	select ARCH_HAS_PHYS_TO_DMA
-	select CPU_HAS_LOAD_STORE_LR
 
 config CPU_LOONGSON32
 	bool
 	select CPU_MIPS32
 	select CPU_MIPSR2
 	select CPU_HAS_PREFETCH
-	select CPU_HAS_LOAD_STORE_LR
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_HIGHMEM
 	select CPU_SUPPORTS_CPUFREQ
@@ -2110,12 +2086,14 @@ config CPU_MIPSR2
 	bool
 	default y if CPU_MIPS32_R2 || CPU_MIPS64_R2 || CPU_CAVIUM_OCTEON
 	select CPU_HAS_RIXI
+	select CPU_HAS_DIEI if !CPU_DIEI_BROKEN
 	select MIPS_SPRAM
 
 config CPU_MIPSR6
 	bool
 	default y if CPU_MIPS32_R6 || CPU_MIPS64_R6
 	select CPU_HAS_RIXI
+	select CPU_HAS_DIEI if !CPU_DIEI_BROKEN
 	select HAVE_ARCH_BITREVERSE
 	select MIPS_ASID_BITS_VARIABLE
 	select MIPS_CRC_SUPPORT
@@ -2575,15 +2553,23 @@ config CPU_HAS_WB
 config XKS01
 	bool
 
+config CPU_HAS_DIEI
+	depends on !CPU_DIEI_BROKEN
+	bool
+
+config CPU_DIEI_BROKEN
+	bool
+
 config CPU_HAS_RIXI
 	bool
 
-config CPU_HAS_LOAD_STORE_LR
+config CPU_NO_LOAD_STORE_LR
 	bool
 	help
-	  CPU has support for unaligned load and store instructions:
+	  CPU lacks support for unaligned load and store instructions:
 	  LWL, LWR, SWL, SWR (Load/store word left/right).
-	  LDL, LDR, SDL, SDR (Load/store doubleword left/right, for 64bit systems).
+	  LDL, LDR, SDL, SDR (Load/store doubleword left/right, for 64bit
+	  systems).
 
 #
 # Vectored interrupt mode is an R2 feature
@@ -2696,6 +2682,14 @@ config NUMA
 config SYS_SUPPORTS_NUMA
 	bool
 
+config HAVE_SETUP_PER_CPU_AREA
+	def_bool y
+	depends on NUMA
+
+config NEED_PER_CPU_EMBED_FIRST_CHUNK
+	def_bool y
+	depends on NUMA
+
 config RELOCATABLE
 	bool "Relocatable kernel"
 	depends on SYS_SUPPORTS_RELOCATABLE && (CPU_MIPS32_R2 || CPU_MIPS64_R2 || CPU_MIPS32_R6 || CPU_MIPS64_R6 || CAVIUM_OCTEON_SOC)
diff --git a/arch/mips/Makefile.postlink b/arch/mips/Makefile.postlink
index f03fdc95143e..4b1d3ba3a8a2 100644
--- a/arch/mips/Makefile.postlink
+++ b/arch/mips/Makefile.postlink
@@ -17,7 +17,7 @@ quiet_cmd_ls3_llsc = LLSCCHK $@
       cmd_ls3_llsc = $(CMD_LS3_LLSC) $@
 
 CMD_RELOCS = arch/mips/boot/tools/relocs
-quiet_cmd_relocs = RELOCS $@
+quiet_cmd_relocs = RELOCS  $@
       cmd_relocs = $(CMD_RELOCS) $@
 
 # `@true` prevents complaint when there is nothing to be done
diff --git a/arch/mips/boot/Makefile b/arch/mips/boot/Makefile
index 528bd73d530a..4ed45ade32a1 100644
--- a/arch/mips/boot/Makefile
+++ b/arch/mips/boot/Makefile
@@ -123,7 +123,7 @@ $(obj)/vmlinux.its.S: $(addprefix $(srctree)/arch/mips/$(PLATFORM)/,$(ITS_INPUTS
 targets += vmlinux.its
 targets += vmlinux.gz.its
 targets += vmlinux.bz2.its
-targets += vmlinux.lzmo.its
+targets += vmlinux.lzma.its
 targets += vmlinux.lzo.its
 
 quiet_cmd_cpp_its_S = ITS     $@
diff --git a/arch/mips/boot/dts/ingenic/Makefile b/arch/mips/boot/dts/ingenic/Makefile
index 9cc48441eb71..e1654291a7b0 100644
--- a/arch/mips/boot/dts/ingenic/Makefile
+++ b/arch/mips/boot/dts/ingenic/Makefile
@@ -2,5 +2,6 @@
 dtb-$(CONFIG_JZ4740_QI_LB60)	+= qi_lb60.dtb
 dtb-$(CONFIG_JZ4770_GCW0)	+= gcw0.dtb
 dtb-$(CONFIG_JZ4780_CI20)	+= ci20.dtb
+dtb-$(CONFIG_X1000_CU1000_NEO)	+= cu1000-neo.dtb
 
 obj-$(CONFIG_BUILTIN_DTB)	+= $(addsuffix .o, $(dtb-y))
diff --git a/arch/mips/boot/dts/ingenic/cu1000-neo.dts b/arch/mips/boot/dts/ingenic/cu1000-neo.dts
new file mode 100644
index 000000000000..03abd94acd84
--- /dev/null
+++ b/arch/mips/boot/dts/ingenic/cu1000-neo.dts
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "x1000.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/ingenic,tcu.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "yna,cu1000-neo", "ingenic,x1000";
+	model = "YSH & ATIL General Board CU Neo";
+
+	aliases {
+		serial2 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x04000000>;
+	};
+
+	wlan_pwrseq: msc1-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+
+		clocks = <&lpoclk>;
+		clock-names = "ext_clock";
+
+		reset-gpios = <&gpc 17 GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <200>;
+
+		lpoclk: ap6212a {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+};
+
+&exclk {
+	clock-frequency = <24000000>;
+};
+
+&tcu {
+	/* 1500 kHz for the system timer and clocksource */
+	assigned-clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER2>;
+	assigned-clock-rates = <1500000>, <1500000>;
+
+	/* Use channel #0 for the system timer channel #2 for the clocksource */
+	ingenic,pwm-channels-mask = <0xfa>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_i2c0>;
+
+	ads7830@48 {
+		compatible = "ti,ads7830";
+		reg = <0x48>;
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_uart2>;
+
+	status = "okay";
+};
+
+&mac {
+	phy-mode = "rmii";
+	phy-handle = <&lan8720a>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_mac>;
+
+	snps,reset-gpio = <&gpc 23 GPIO_ACTIVE_LOW>; /* PC23 */
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 30000>;
+
+	status = "okay";
+};
+
+&mdio {
+	status = "okay";
+
+	lan8720a: ethernet-phy@0 {
+		compatible = "ethernet-phy-id0007.c0f0", "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&msc0 {
+	bus-width = <8>;
+	max-frequency = <50000000>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_msc0>;
+
+	non-removable;
+
+	status = "okay";
+};
+
+&msc1 {
+	bus-width = <4>;
+	max-frequency = <50000000>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_msc1>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	non-removable;
+
+	mmc-pwrseq = <&wlan_pwrseq>;
+
+	status = "okay";
+
+	ap6212a: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+
+		interrupt-parent = <&gpc>;
+		interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-names = "host-wake";
+
+		brcm,drive-strength = <10>;
+	};
+};
+
+&pinctrl {
+	pins_i2c0: i2c0 {
+		function = "i2c0";
+		groups = "i2c0-data";
+		bias-disable;
+	};
+
+	pins_uart2: uart2 {
+		function = "uart2";
+		groups = "uart2-data-d";
+		bias-disable;
+	};
+
+	pins_mac: mac {
+		function = "mac";
+		groups = "mac";
+		bias-disable;
+	};
+
+	pins_msc0: msc0 {
+		function = "mmc0";
+		groups = "mmc0-1bit", "mmc0-4bit", "mmc0-8bit";
+		bias-disable;
+	};
+
+	pins_msc1: msc1 {
+		function = "mmc1";
+		groups = "mmc1-1bit", "mmc1-4bit";
+		bias-disable;
+	};
+};
diff --git a/arch/mips/boot/dts/ingenic/x1000.dtsi b/arch/mips/boot/dts/ingenic/x1000.dtsi
new file mode 100644
index 000000000000..4994c695a1a7
--- /dev/null
+++ b/arch/mips/boot/dts/ingenic/x1000.dtsi
@@ -0,0 +1,317 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/clock/x1000-cgu.h>
+#include <dt-bindings/dma/x1000-dma.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "ingenic,x1000", "ingenic,x1000e";
+
+	cpuintc: interrupt-controller {
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		compatible = "mti,cpu-interrupt-controller";
+	};
+
+	intc: interrupt-controller@10001000 {
+		compatible = "ingenic,x1000-intc", "ingenic,jz4780-intc";
+		reg = <0x10001000 0x50>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		interrupt-parent = <&cpuintc>;
+		interrupts = <2>;
+	};
+
+	exclk: ext {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+	};
+
+	rtclk: rtc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+
+	cgu: x1000-cgu@10000000 {
+		compatible = "ingenic,x1000-cgu";
+		reg = <0x10000000 0x100>;
+
+		#clock-cells = <1>;
+
+		clocks = <&exclk>, <&rtclk>;
+		clock-names = "ext", "rtc";
+	};
+
+	tcu: timer@10002000 {
+		compatible = "ingenic,x1000-tcu",
+				 "ingenic,jz4770-tcu",
+				 "simple-mfd";
+		reg = <0x10002000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x10002000 0x1000>;
+
+		#clock-cells = <1>;
+
+		clocks = <&cgu X1000_CLK_RTCLK
+			  &cgu X1000_CLK_EXCLK
+			  &cgu X1000_CLK_PCLK>;
+		clock-names = "rtc", "ext", "pclk";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <27 26 25>;
+
+		wdt: watchdog@0 {
+			compatible = "ingenic,x1000-watchdog", "ingenic,jz4780-watchdog";
+			reg = <0x0 0x10>;
+
+			clocks = <&cgu X1000_CLK_RTCLK>;
+			clock-names = "wdt";
+		};
+	};
+
+	rtc: rtc@10003000 {
+		compatible = "ingenic,x1000-rtc", "ingenic,jz4780-rtc";
+		reg = <0x10003000 0x4c>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <32>;
+
+		clocks = <&cgu X1000_CLK_RTCLK>;
+		clock-names = "rtc";
+	};
+
+	pinctrl: pin-controller@10010000 {
+		compatible = "ingenic,x1000-pinctrl";
+		reg = <0x10010000 0x800>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpa: gpio@0 {
+			compatible = "ingenic,x1000-gpio";
+			reg = <0>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 0 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <17>;
+		};
+
+		gpb: gpio@1 {
+			compatible = "ingenic,x1000-gpio";
+			reg = <1>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 32 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <16>;
+		};
+
+		gpc: gpio@2 {
+			compatible = "ingenic,x1000-gpio";
+			reg = <2>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 64 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <15>;
+		};
+
+		gpd: gpio@3 {
+			compatible = "ingenic,x1000-gpio";
+			reg = <3>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 96 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <14>;
+		};
+	};
+
+	i2c0: i2c-controller@10050000 {
+		compatible = "ingenic,x1000-i2c";
+		reg = <0x10050000 0x1000>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <60>;
+
+		clocks = <&cgu X1000_CLK_I2C0>;
+
+		status = "disabled";
+	};
+
+	i2c1: i2c-controller@10051000 {
+		compatible = "ingenic,x1000-i2c";
+		reg = <0x10051000 0x1000>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <59>;
+
+		clocks = <&cgu X1000_CLK_I2C1>;
+
+		status = "disabled";
+	};
+
+	i2c2: i2c-controller@10052000 {
+		compatible = "ingenic,x1000-i2c";
+		reg = <0x10052000 0x1000>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <58>;
+
+		clocks = <&cgu X1000_CLK_I2C2>;
+
+		status = "disabled";
+	};
+
+	uart0: serial@10030000 {
+		compatible = "ingenic,x1000-uart";
+		reg = <0x10030000 0x100>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <51>;
+
+		clocks = <&exclk>, <&cgu X1000_CLK_UART0>;
+		clock-names = "baud", "module";
+
+		status = "disabled";
+	};
+
+	uart1: serial@10031000 {
+		compatible = "ingenic,x1000-uart";
+		reg = <0x10031000 0x100>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <50>;
+
+		clocks = <&exclk>, <&cgu X1000_CLK_UART1>;
+		clock-names = "baud", "module";
+
+		status = "disabled";
+	};
+
+	uart2: serial@10032000 {
+		compatible = "ingenic,x1000-uart";
+		reg = <0x10032000 0x100>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <49>;
+
+		clocks = <&exclk>, <&cgu X1000_CLK_UART2>;
+		clock-names = "baud", "module";
+
+		status = "disabled";
+	};
+
+	pdma: dma-controller@13420000 {
+		compatible = "ingenic,x1000-dma";
+		reg = <0x13420000 0x400
+			   0x13421000 0x40>;
+		#dma-cells = <2>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <10>;
+
+		clocks = <&cgu X1000_CLK_PDMA>;
+	};
+
+	mac: ethernet@134b0000 {
+		compatible = "ingenic,x1000-mac", "snps,dwmac";
+		reg = <0x134b0000 0x2000>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <55>;
+		interrupt-names = "macirq";
+
+		clocks = <&cgu X1000_CLK_MAC>;
+		clock-names = "stmmaceth";
+
+		status = "disabled";
+
+		mdio: mdio {
+			compatible = "snps,dwmac-mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+	};
+
+	msc0: mmc@13450000 {
+		compatible = "ingenic,x1000-mmc";
+		reg = <0x13450000 0x1000>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <37>;
+
+		clocks = <&cgu X1000_CLK_MSC0>;
+		clock-names = "mmc";
+
+		cap-sd-highspeed;
+		cap-mmc-highspeed;
+		cap-sdio-irq;
+
+		dmas = <&pdma X1000_DMA_MSC0_RX 0xffffffff>,
+			   <&pdma X1000_DMA_MSC0_TX 0xffffffff>;
+		dma-names = "rx", "tx";
+
+		status = "disabled";
+	};
+
+	msc1: mmc@13460000 {
+		compatible = "ingenic,x1000-mmc";
+		reg = <0x13460000 0x1000>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <36>;
+
+		clocks = <&cgu X1000_CLK_MSC1>;
+		clock-names = "mmc";
+
+		cap-sd-highspeed;
+		cap-mmc-highspeed;
+		cap-sdio-irq;
+
+		dmas = <&pdma X1000_DMA_MSC1_RX 0xffffffff>,
+			   <&pdma X1000_DMA_MSC1_TX 0xffffffff>;
+		dma-names = "rx", "tx";
+
+		status = "disabled";
+	};
+};
diff --git a/arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts b/arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts
index aa5caaa31104..6069b33cf09f 100644
--- a/arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts
+++ b/arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts
@@ -177,6 +177,9 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinmux_i2s_gpio>;		/* GPIO0..3 */
 
+	fifo-size = <8>;
+	tx-threshold = <8>;
+
 	rts-gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
 	cts-gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
 };
@@ -195,3 +198,8 @@
 &watchdog {
 	status = "okay";
 };
+
+&wmac {
+	status = "okay";
+	mediatek,mtd-eeprom = <&factory 0x0000>;
+};
diff --git a/arch/mips/boot/dts/ralink/mt7628a.dtsi b/arch/mips/boot/dts/ralink/mt7628a.dtsi
index 742bcc1dc2e0..892e8ab863c5 100644
--- a/arch/mips/boot/dts/ralink/mt7628a.dtsi
+++ b/arch/mips/boot/dts/ralink/mt7628a.dtsi
@@ -285,4 +285,14 @@
 		interrupt-parent = <&intc>;
 		interrupts = <18>;
 	};
+
+	wmac: wmac@10300000 {
+		compatible = "mediatek,mt7628-wmac";
+		reg = <0x10300000 0x100000>;
+
+		interrupt-parent = <&cpuintc>;
+		interrupts = <6>;
+
+		status = "disabled";
+	};
 };
diff --git a/arch/mips/cavium-octeon/octeon-irq.c b/arch/mips/cavium-octeon/octeon-irq.c
index f97be32bf699..6bd1e97effdf 100644
--- a/arch/mips/cavium-octeon/octeon-irq.c
+++ b/arch/mips/cavium-octeon/octeon-irq.c
@@ -2193,7 +2193,7 @@ static int octeon_irq_cib_map(struct irq_domain *d,
 	struct octeon_irq_cib_chip_data *cd;
 
 	if (hw >= host_data->max_bits) {
-		pr_err("ERROR: %s mapping %u is to big!\n",
+		pr_err("ERROR: %s mapping %u is too big!\n",
 		       irq_domain_get_of_node(d)->name, (unsigned)hw);
 		return -EINVAL;
 	}
diff --git a/arch/mips/configs/cu1000-neo_defconfig b/arch/mips/configs/cu1000-neo_defconfig
new file mode 100644
index 000000000000..9b05a8fdabe1
--- /dev/null
+++ b/arch/mips/configs/cu1000-neo_defconfig
@@ -0,0 +1,117 @@
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_KERNEL_GZIP=y
+CONFIG_SYSVIPC=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_CGROUPS=y
+CONFIG_MEMCG=y
+CONFIG_MEMCG_KMEM=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_NAMESPACES=y
+CONFIG_USER_NS=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_EMBEDDED=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+CONFIG_MACH_INGENIC=y
+CONFIG_X1000_CU1000_NEO=y
+CONFIG_HIGHMEM=y
+CONFIG_HZ_100=y
+# CONFIG_SECCOMP is not set
+# CONFIG_SUSPEND is not set
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_COMPACTION is not set
+CONFIG_CMA=y
+CONFIG_CMA_AREAS=7
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_CFG80211=y
+CONFIG_UEVENT_HELPER=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_ALLOW_DEV_COREDUMP is not set
+CONFIG_NETDEVICES=y
+CONFIG_STMMAC_ETH=y
+CONFIG_SMSC_PHY=y
+CONFIG_BRCMFMAC=y
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_LEGACY_PTY_COUNT=2
+CONFIG_SERIAL_EARLYCON=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=3
+CONFIG_SERIAL_8250_RUNTIME_UARTS=3
+CONFIG_SERIAL_8250_INGENIC=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_JZ4780=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_SENSORS_ADS7828=y
+CONFIG_WATCHDOG=y
+CONFIG_JZ4740_WDT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_HID is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+CONFIG_MMC_JZ4740=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_JZ4740=y
+CONFIG_DMADEVICES=y
+CONFIG_DMA_JZ4780=y
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_NVMEM=y
+CONFIG_NVMEM_SYSFS=y
+CONFIG_EXT4_FS=y
+# CONFIG_DNOTIFY is not set
+CONFIG_AUTOFS_FS=y
+CONFIG_PROC_KCORE=y
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_TMPFS=y
+CONFIG_CONFIGFS_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NLS=y
+CONFIG_NLS_CODEPAGE_936=y
+CONFIG_NLS_CODEPAGE_950=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_UTF8=y
+CONFIG_CRYPTO_ECHAINIV=y
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_LZO=y
+CONFIG_PRINTK_TIME=y
+CONFIG_CONSOLE_LOGLEVEL_DEFAULT=15
+CONFIG_CONSOLE_LOGLEVEL_QUIET=15
+CONFIG_MESSAGE_LOGLEVEL_DEFAULT=7
+CONFIG_DEBUG_INFO=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_DEBUG_FS=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_PANIC_ON_OOPS=y
+CONFIG_PANIC_TIMEOUT=10
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_PREEMPT is not set
+CONFIG_STACKTRACE=y
+# CONFIG_FTRACE is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="earlycon clk_ignore_unused"
diff --git a/arch/mips/configs/generic/board-ocelot.config b/arch/mips/configs/generic/board-ocelot.config
index 1134fbb99fc2..7626f2a75b03 100644
--- a/arch/mips/configs/generic/board-ocelot.config
+++ b/arch/mips/configs/generic/board-ocelot.config
@@ -41,6 +41,7 @@ CONFIG_SPI_DESIGNWARE=y
 CONFIG_SPI_DW_MMIO=y
 CONFIG_SPI_SPIDEV=y
 
+CONFIG_PINCTRL=y
 CONFIG_PINCTRL_OCELOT=y
 
 CONFIG_GPIO_SYSFS=y
diff --git a/arch/mips/include/asm/Kbuild b/arch/mips/include/asm/Kbuild
index 61b0fc2026e6..4ebd8ce254ce 100644
--- a/arch/mips/include/asm/Kbuild
+++ b/arch/mips/include/asm/Kbuild
@@ -6,7 +6,6 @@ generated-y += syscall_table_64_n64.h
 generated-y += syscall_table_64_o32.h
 generic-y += current.h
 generic-y += device.h
-generic-y += dma-contiguous.h
 generic-y += emergency-restart.h
 generic-y += export.h
 generic-y += irq_work.h
@@ -19,6 +18,7 @@ generic-y += preempt.h
 generic-y += qrwlock.h
 generic-y += qspinlock.h
 generic-y += sections.h
+generic-y += serial.h
 generic-y += trace_clock.h
 generic-y += unaligned.h
 generic-y += user.h
diff --git a/arch/mips/include/asm/bootinfo.h b/arch/mips/include/asm/bootinfo.h
index d41a5057bc69..61727785a247 100644
--- a/arch/mips/include/asm/bootinfo.h
+++ b/arch/mips/include/asm/bootinfo.h
@@ -81,6 +81,7 @@ enum loongson2ef_machine_type {
 #define  MACH_INGENIC_JZ4770	2	/* JZ4770 SOC		*/
 #define  MACH_INGENIC_JZ4780	3	/* JZ4780 SOC		*/
 #define  MACH_INGENIC_X1000		4	/* X1000 SOC		*/
+#define  MACH_INGENIC_X1830		5	/* X1830 SOC		*/
 
 extern char *system_type;
 const char *get_system_type(void);
diff --git a/arch/mips/include/asm/compat.h b/arch/mips/include/asm/compat.h
index c99166eadbde..255afcdd79c9 100644
--- a/arch/mips/include/asm/compat.h
+++ b/arch/mips/include/asm/compat.h
@@ -100,24 +100,6 @@ typedef u32		compat_sigset_word;
 
 #define COMPAT_OFF_T_MAX	0x7fffffff
 
-/*
- * A pointer passed in from user mode. This should not
- * be used for syscall parameters, just declare them
- * as pointers because the syscall entry code will have
- * appropriately converted them already.
- */
-
-static inline void __user *compat_ptr(compat_uptr_t uptr)
-{
-	/* cast to a __user pointer via "unsigned long" makes sparse happy */
-	return (void __user *)(unsigned long)(long)uptr;
-}
-
-static inline compat_uptr_t ptr_to_compat(void __user *uptr)
-{
-	return (u32)(unsigned long)uptr;
-}
-
 static inline void __user *arch_compat_alloc_user_space(long len)
 {
 	struct pt_regs *regs = (struct pt_regs *)
diff --git a/arch/mips/include/asm/cpu-features.h b/arch/mips/include/asm/cpu-features.h
index 983a6a7f43a1..de44c92b1c1f 100644
--- a/arch/mips/include/asm/cpu-features.h
+++ b/arch/mips/include/asm/cpu-features.h
@@ -555,6 +555,10 @@
 # define cpu_has_perf		__opt(MIPS_CPU_PERF)
 #endif
 
+#ifndef cpu_has_mac2008_only
+# define cpu_has_mac2008_only	__opt(MIPS_CPU_MAC_2008_ONLY)
+#endif
+
 #ifdef CONFIG_SMP
 /*
  * Some systems share FTLB RAMs between threads within a core (siblings in
diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h
index ea830783d663..216a22916740 100644
--- a/arch/mips/include/asm/cpu.h
+++ b/arch/mips/include/asm/cpu.h
@@ -46,7 +46,7 @@
 #define PRID_COMP_NETLOGIC	0x0c0000
 #define PRID_COMP_CAVIUM	0x0d0000
 #define PRID_COMP_LOONGSON	0x140000
-#define PRID_COMP_INGENIC_D0	0xd00000	/* JZ4740, JZ4750 */
+#define PRID_COMP_INGENIC_D0	0xd00000	/* JZ4740, JZ4750, X1830 */
 #define PRID_COMP_INGENIC_D1	0xd10000	/* JZ4770, JZ4775, X1000 */
 #define PRID_COMP_INGENIC_E1	0xe10000	/* JZ4780 */
 
@@ -185,7 +185,8 @@
  * These are the PRID's for when 23:16 == PRID_COMP_INGENIC_*
  */
 
-#define PRID_IMP_XBURST	       0x0200
+#define PRID_IMP_XBURST_REV1	0x0200	/* XBurst with MXU SIMD ISA		*/
+#define PRID_IMP_XBURST_REV2	0x0100	/* XBurst with MXU2 SIMD ISA	*/
 
 /*
  * These are the PRID's for when 23:16 == PRID_COMP_NETLOGIC
@@ -415,6 +416,7 @@ enum cpu_type_enum {
 #define MIPS_CPU_MT_PER_TC_PERF_COUNTERS \
 				BIT_ULL(56)	/* CPU has perf counters implemented per TC (MIPSMT ASE) */
 #define MIPS_CPU_MMID		BIT_ULL(57)	/* CPU supports MemoryMapIDs */
+#define MIPS_CPU_MAC_2008_ONLY	BIT_ULL(58)	/* CPU Only support MAC2008 Fused multiply-add instruction */
 
 /*
  * CPU ASE encodings
diff --git a/arch/mips/include/asm/gio_device.h b/arch/mips/include/asm/gio_device.h
index c52948f9ca95..159087f5386e 100644
--- a/arch/mips/include/asm/gio_device.h
+++ b/arch/mips/include/asm/gio_device.h
@@ -32,8 +32,6 @@ struct gio_driver {
 };
 #define to_gio_driver(drv) container_of(drv, struct gio_driver, driver)
 
-extern const struct gio_device_id *gio_match_device(const struct gio_device_id *,
-						    const struct gio_device *);
 extern struct gio_device *gio_dev_get(struct gio_device *);
 extern void gio_dev_put(struct gio_device *);
 
diff --git a/arch/mips/include/asm/hazards.h b/arch/mips/include/asm/hazards.h
index a4f48b0f5541..a0b92205f933 100644
--- a/arch/mips/include/asm/hazards.h
+++ b/arch/mips/include/asm/hazards.h
@@ -23,7 +23,7 @@
  * TLB hazards
  */
 #if (defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR6)) && \
-	!defined(CONFIG_CPU_CAVIUM_OCTEON) && !defined(CONFIG_LOONGSON3_ENHANCEMENT)
+	!defined(CONFIG_CPU_CAVIUM_OCTEON) && !defined(CONFIG_CPU_LOONGSON64)
 
 /*
  * MIPSR2 defines ehb for hazard avoidance
@@ -158,7 +158,7 @@ do {									\
 } while (0)
 
 #elif defined(CONFIG_MIPS_ALCHEMY) || defined(CONFIG_CPU_CAVIUM_OCTEON) || \
-	defined(CONFIG_CPU_LOONGSON2EF) || defined(CONFIG_LOONGSON3_ENHANCEMENT) || \
+	defined(CONFIG_CPU_LOONGSON2EF) || defined(CONFIG_CPU_LOONGSON64) || \
 	defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_R5500) || defined(CONFIG_CPU_XLR)
 
 /*
diff --git a/arch/mips/include/asm/irqflags.h b/arch/mips/include/asm/irqflags.h
index c4728bbdf15b..47a8ffc0b413 100644
--- a/arch/mips/include/asm/irqflags.h
+++ b/arch/mips/include/asm/irqflags.h
@@ -18,7 +18,7 @@
 #include <asm/compiler.h>
 #include <asm/hazards.h>
 
-#if defined(CONFIG_CPU_MIPSR2) || defined (CONFIG_CPU_MIPSR6)
+#if defined(CONFIG_CPU_HAS_DIEI)
 
 static inline void arch_local_irq_disable(void)
 {
@@ -94,7 +94,7 @@ static inline void arch_local_irq_restore(unsigned long flags)
 void arch_local_irq_disable(void);
 unsigned long arch_local_irq_save(void);
 void arch_local_irq_restore(unsigned long flags);
-#endif /* CONFIG_CPU_MIPSR2 || CONFIG_CPU_MIPSR6 */
+#endif /* CONFIG_CPU_HAS_DIEI */
 
 static inline void arch_local_irq_enable(void)
 {
@@ -102,7 +102,7 @@ static inline void arch_local_irq_enable(void)
 	"	.set	push						\n"
 	"	.set	reorder						\n"
 	"	.set	noat						\n"
-#if   defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR6)
+#if defined(CONFIG_CPU_HAS_DIEI)
 	"	ei							\n"
 #else
 	"	mfc0	$1,$12						\n"
diff --git a/arch/mips/include/asm/local.h b/arch/mips/include/asm/local.h
index 02783e141c32..fef0fda8f82f 100644
--- a/arch/mips/include/asm/local.h
+++ b/arch/mips/include/asm/local.h
@@ -37,6 +37,7 @@ static __inline__ long local_add_return(long i, local_t * l)
 		__asm__ __volatile__(
 		"	.set	push					\n"
 		"	.set	arch=r4000				\n"
+			__SYNC(full, loongson3_war) "			\n"
 		"1:"	__LL	"%1, %2		# local_add_return	\n"
 		"	addu	%0, %1, %3				\n"
 			__SC	"%0, %2					\n"
@@ -52,6 +53,7 @@ static __inline__ long local_add_return(long i, local_t * l)
 		__asm__ __volatile__(
 		"	.set	push					\n"
 		"	.set	"MIPS_ISA_ARCH_LEVEL"			\n"
+			__SYNC(full, loongson3_war) "			\n"
 		"1:"	__LL	"%1, %2		# local_add_return	\n"
 		"	addu	%0, %1, %3				\n"
 			__SC	"%0, %2					\n"
@@ -84,6 +86,7 @@ static __inline__ long local_sub_return(long i, local_t * l)
 		__asm__ __volatile__(
 		"	.set	push					\n"
 		"	.set	arch=r4000				\n"
+			__SYNC(full, loongson3_war) "			\n"
 		"1:"	__LL	"%1, %2		# local_sub_return	\n"
 		"	subu	%0, %1, %3				\n"
 			__SC	"%0, %2					\n"
@@ -99,6 +102,7 @@ static __inline__ long local_sub_return(long i, local_t * l)
 		__asm__ __volatile__(
 		"	.set	push					\n"
 		"	.set	"MIPS_ISA_ARCH_LEVEL"			\n"
+			__SYNC(full, loongson3_war) "			\n"
 		"1:"	__LL	"%1, %2		# local_sub_return	\n"
 		"	subu	%0, %1, %3				\n"
 			__SC	"%0, %2					\n"
diff --git a/arch/mips/include/asm/mach-ip27/kernel-entry-init.h b/arch/mips/include/asm/mach-ip27/kernel-entry-init.h
index f992c1db876b..3e54f605a70b 100644
--- a/arch/mips/include/asm/mach-ip27/kernel-entry-init.h
+++ b/arch/mips/include/asm/mach-ip27/kernel-entry-init.h
@@ -10,20 +10,10 @@
 #define __ASM_MACH_IP27_KERNEL_ENTRY_H
 
 #include <asm/sn/addrs.h>
-#include <asm/sn/sn0/hubni.h>
+#include <asm/sn/agent.h>
 #include <asm/sn/klkernvars.h>
 
 /*
- * Returns the local nasid into res.
- */
-	.macro GET_NASID_ASM res
-	dli	\res, LOCAL_HUB_ADDR(NI_STATUS_REV_ID)
-	ld	\res, (\res)
-	and	\res, NSRI_NODEID_MASK
-	dsrl	\res, NSRI_NODEID_SHFT
-	.endm
-
-/*
  * TLB bits
  */
 #define PAGE_GLOBAL		(1 << 6)
diff --git a/arch/mips/include/asm/mach-ip27/mangle-port.h b/arch/mips/include/asm/mach-ip27/mangle-port.h
index f6e4912ea062..27c56efa519f 100644
--- a/arch/mips/include/asm/mach-ip27/mangle-port.h
+++ b/arch/mips/include/asm/mach-ip27/mangle-port.h
@@ -8,7 +8,7 @@
 #ifndef __ASM_MACH_IP27_MANGLE_PORT_H
 #define __ASM_MACH_IP27_MANGLE_PORT_H
 
-#define __swizzle_addr_b(port)	(port)
+#define __swizzle_addr_b(port)	((port) ^ 3)
 #define __swizzle_addr_w(port)	((port) ^ 2)
 #define __swizzle_addr_l(port)	(port)
 #define __swizzle_addr_q(port)	(port)
@@ -20,6 +20,6 @@
 # define ioswabl(a, x)		(x)
 # define __mem_ioswabl(a, x)	cpu_to_le32(x)
 # define ioswabq(a, x)		(x)
-# define __mem_ioswabq(a, x)	cpu_to_le32(x)
+# define __mem_ioswabq(a, x)	cpu_to_le64(x)
 
 #endif /* __ASM_MACH_IP27_MANGLE_PORT_H */
diff --git a/arch/mips/include/asm/mach-ip27/mmzone.h b/arch/mips/include/asm/mach-ip27/mmzone.h
index f463826515df..08c36e50a860 100644
--- a/arch/mips/include/asm/mach-ip27/mmzone.h
+++ b/arch/mips/include/asm/mach-ip27/mmzone.h
@@ -4,7 +4,8 @@
 
 #include <asm/sn/addrs.h>
 #include <asm/sn/arch.h>
-#include <asm/sn/hub.h>
+#include <asm/sn/agent.h>
+#include <asm/sn/klkernvars.h>
 
 #define pa_to_nid(addr)		NASID_GET(addr)
 
@@ -12,7 +13,6 @@ struct hub_data {
 	kern_vars_t	kern_vars;
 	DECLARE_BITMAP(h_bigwin_used, HUB_NUM_BIG_WINDOW);
 	cpumask_t	h_cpus;
-	unsigned long slice_map;
 };
 
 struct node_data {
diff --git a/arch/mips/include/asm/mach-ip27/topology.h b/arch/mips/include/asm/mach-ip27/topology.h
index be61ddcdacab..d66cc53feab8 100644
--- a/arch/mips/include/asm/mach-ip27/topology.h
+++ b/arch/mips/include/asm/mach-ip27/topology.h
@@ -2,12 +2,12 @@
 #ifndef _ASM_MACH_TOPOLOGY_H
 #define _ASM_MACH_TOPOLOGY_H	1
 
-#include <asm/sn/hub.h>
 #include <asm/sn/types.h>
 #include <asm/mmzone.h>
 
 struct cpuinfo_ip27 {
 	nasid_t		p_nasid;	/* my node ID in numa-as-id-space */
+	unsigned short	p_speed;	/* cpu speed in MHz */
 	unsigned char	p_slice;	/* Physical position on node board */
 };
 
diff --git a/arch/mips/include/asm/mach-loongson64/cpu-feature-overrides.h b/arch/mips/include/asm/mach-loongson64/cpu-feature-overrides.h
index 7dc8d75445a9..4fab38c743dd 100644
--- a/arch/mips/include/asm/mach-loongson64/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-loongson64/cpu-feature-overrides.h
@@ -46,5 +46,7 @@
 #define cpu_has_wsbh		1
 #define cpu_has_ic_fills_f_dc	1
 #define cpu_hwrena_impl_bits	0xc0000000
+#define cpu_has_mac2008_only	1
+#define cpu_has_mips_r2_exec_hazard 0
 
 #endif /* __ASM_MACH_LOONGSON64_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h
index 0d5a30988697..796fe47cfd17 100644
--- a/arch/mips/include/asm/mipsregs.h
+++ b/arch/mips/include/asm/mipsregs.h
@@ -1101,9 +1101,12 @@
 /*
  * Bits 22:20 of the FPU Status Register will be read as 0,
  * and should be written as zero.
+ * MAC2008 was removed in Release 5 so we still treat it as
+ * reserved.
  */
 #define FPU_CSR_RSVD	(_ULCAST_(7) << 20)
 
+#define FPU_CSR_MAC2008	(_ULCAST_(1) << 20)
 #define FPU_CSR_ABS2008	(_ULCAST_(1) << 19)
 #define FPU_CSR_NAN2008	(_ULCAST_(1) << 18)
 
diff --git a/arch/mips/include/asm/pci/bridge.h b/arch/mips/include/asm/pci/bridge.h
index 3bc630ff9ad4..9c476a0400e0 100644
--- a/arch/mips/include/asm/pci/bridge.h
+++ b/arch/mips/include/asm/pci/bridge.h
@@ -806,7 +806,8 @@ struct bridge_controller {
 	unsigned long		baddr;
 	unsigned long		intr_addr;
 	struct irq_domain	*domain;
-	unsigned int		pci_int[8];
+	unsigned int		pci_int[8][2];
+	unsigned int		int_mapping[8][2];
 	u32			ioc3_sid[8];
 	nasid_t			nasid;
 };
diff --git a/arch/mips/include/asm/pgtable.h b/arch/mips/include/asm/pgtable.h
index 91b89aab1787..aef5378f909c 100644
--- a/arch/mips/include/asm/pgtable.h
+++ b/arch/mips/include/asm/pgtable.h
@@ -639,6 +639,11 @@ static inline pmd_t pmdp_huge_get_and_clear(struct mm_struct *mm,
 
 #endif /* CONFIG_TRANSPARENT_HUGEPAGE */
 
+#ifdef _PAGE_HUGE
+#define pmd_leaf(pmd)	((pmd_val(pmd) & _PAGE_HUGE) != 0)
+#define pud_leaf(pud)	((pud_val(pud) & _PAGE_HUGE) != 0)
+#endif
+
 #define gup_fast_permitted(start, end)	(!cpu_has_dc_aliases)
 
 #include <asm-generic/pgtable.h>
diff --git a/arch/mips/include/asm/serial.h b/arch/mips/include/asm/serial.h
deleted file mode 100644
index 2777148dbfc5..000000000000
--- a/arch/mips/include/asm/serial.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (C) 2017 MIPS Tech, LLC
- */
-#ifndef __ASM__SERIAL_H
-#define __ASM__SERIAL_H
-
-#ifdef CONFIG_MIPS_GENERIC
-/*
- * Generic kernels cannot know a correct value for all platforms at
- * compile time. Set it to 0 to prevent 8250_early using it
- */
-#define BASE_BAUD 0
-#else
-#include <asm-generic/serial.h>
-#endif
-
-#endif /* __ASM__SERIAL_H */
diff --git a/arch/mips/include/asm/sn/arch.h b/arch/mips/include/asm/sn/arch.h
index f7d3273d9599..9a9682543e89 100644
--- a/arch/mips/include/asm/sn/arch.h
+++ b/arch/mips/include/asm/sn/arch.h
@@ -25,7 +25,4 @@
 #define INVALID_MODULE		(moduleid_t)-1
 #define INVALID_PARTID		(partid_t)-1
 
-extern nasid_t get_nasid(void);
-extern int get_cpu_slice(cpuid_t);
-
 #endif /* _ASM_SN_ARCH_H */
diff --git a/arch/mips/include/asm/sn/hub.h b/arch/mips/include/asm/sn/hub.h
deleted file mode 100644
index 45878fbefbae..000000000000
--- a/arch/mips/include/asm/sn/hub.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SN_HUB_H
-#define __ASM_SN_HUB_H
-
-#include <linux/types.h>
-#include <linux/cpumask.h>
-#include <asm/sn/types.h>
-#include <asm/sn/io.h>
-#include <asm/sn/klkernvars.h>
-#include <asm/xtalk/xtalk.h>
-
-/* ip27-hubio.c */
-extern unsigned long hub_pio_map(nasid_t nasid, xwidgetnum_t widget,
-			  unsigned long xtalk_addr, size_t size);
-extern void hub_pio_init(nasid_t nasid);
-
-#endif /* __ASM_SN_HUB_H */
diff --git a/arch/mips/include/asm/sn/intr.h b/arch/mips/include/asm/sn/intr.h
index fc1348193957..3d6954d370dc 100644
--- a/arch/mips/include/asm/sn/intr.h
+++ b/arch/mips/include/asm/sn/intr.h
@@ -8,15 +8,6 @@
 #ifndef __ASM_SN_INTR_H
 #define __ASM_SN_INTR_H
 
-/* Number of interrupt levels associated with each interrupt register. */
-#define N_INTPEND_BITS		64
-
-#define INT_PEND0_BASELVL	0
-#define INT_PEND1_BASELVL	64
-
-#define N_INTPENDJUNK_BITS	8
-#define INTPENDJUNK_CLRBIT	0x80
-
 /*
  * Macros to manipulate the interrupt register on the calling hub chip.
  */
@@ -84,14 +75,6 @@ do {								\
 #define CPU_RESCHED_B_IRQ	 8
 #define CPU_CALL_A_IRQ		 9
 #define CPU_CALL_B_IRQ		10
-#define MSC_MESG_INTR		11
-#define BASE_PCI_IRQ		12
-
-/*
- * INT_PEND0 again, bits determined by hardware / hardcoded:
- */
-#define SDISK_INTR		63	/* SABLE name */
-#define IP_PEND0_6_63		63	/* What is this bit? */
 
 /*
  * INT_PEND1 hard-coded bits:
diff --git a/arch/mips/include/asm/sn/ioc3.h b/arch/mips/include/asm/sn/ioc3.h
index 78ef760ddde4..2c09c17cadcd 100644
--- a/arch/mips/include/asm/sn/ioc3.h
+++ b/arch/mips/include/asm/sn/ioc3.h
@@ -21,50 +21,50 @@ struct ioc3_serialregs {
 
 /* SUPERIO uart register map */
 struct ioc3_uartregs {
+	u8	iu_lcr;
 	union {
-		u8	iu_rbr;	/* read only, DLAB == 0 */
-		u8	iu_thr;	/* write only, DLAB == 0 */
-		u8	iu_dll;	/* DLAB == 1 */
+		u8	iu_iir;	/* read only */
+		u8	iu_fcr;	/* write only */
 	};
 	union {
 		u8	iu_ier;	/* DLAB == 0 */
 		u8	iu_dlm;	/* DLAB == 1 */
 	};
 	union {
-		u8	iu_iir;	/* read only */
-		u8	iu_fcr;	/* write only */
+		u8	iu_rbr;	/* read only, DLAB == 0 */
+		u8	iu_thr;	/* write only, DLAB == 0 */
+		u8	iu_dll;	/* DLAB == 1 */
 	};
-	u8	iu_lcr;
-	u8	iu_mcr;
-	u8	iu_lsr;
-	u8	iu_msr;
 	u8	iu_scr;
+	u8	iu_msr;
+	u8	iu_lsr;
+	u8	iu_mcr;
 };
 
 struct ioc3_sioregs {
 	u8	fill[0x141];	/* starts at 0x141 */
 
-	u8	uartc;
 	u8	kbdcg;
+	u8	uartc;
 
-	u8	fill0[0x150 - 0x142 - 1];
+	u8	fill0[0x151 - 0x142 - 1];
 
-	u8	pp_data;
-	u8	pp_dsr;
 	u8	pp_dcr;
+	u8	pp_dsr;
+	u8	pp_data;
 
-	u8	fill1[0x158 - 0x152 - 1];
+	u8	fill1[0x159 - 0x153 - 1];
 
-	u8	pp_fifa;
-	u8	pp_cfgb;
 	u8	pp_ecr;
+	u8	pp_cfgb;
+	u8	pp_fifa;
 
-	u8	fill2[0x168 - 0x15a - 1];
+	u8	fill2[0x16a - 0x15b - 1];
 
-	u8	rtcad;
 	u8	rtcdat;
+	u8	rtcad;
 
-	u8	fill3[0x170 - 0x169 - 1];
+	u8	fill3[0x170 - 0x16b - 1];
 
 	struct ioc3_uartregs	uartb;	/* 0x20170  */
 	struct ioc3_uartregs	uarta;	/* 0x20178  */
@@ -598,5 +598,9 @@ struct ioc3_etxd {
 #define	IOC3_SUBSYS_IP30_SYSBOARD	0xc304
 #define	IOC3_SUBSYS_MENET		0xc305
 #define	IOC3_SUBSYS_MENET4		0xc306
+#define	IOC3_SUBSYS_IO7			0xc307
+#define	IOC3_SUBSYS_IO8			0xc308
+#define	IOC3_SUBSYS_IO9			0xc309
+#define	IOC3_SUBSYS_IP34_SYSBOARD	0xc30A
 
 #endif /* MIPS_SN_IOC3_H */
diff --git a/arch/mips/include/asm/sn/klconfig.h b/arch/mips/include/asm/sn/klconfig.h
index 467c313d5767..117f85e4bef5 100644
--- a/arch/mips/include/asm/sn/klconfig.h
+++ b/arch/mips/include/asm/sn/klconfig.h
@@ -889,10 +889,6 @@ typedef union {
 extern lboard_t *find_lboard(lboard_t *start, unsigned char type);
 extern klinfo_t *find_component(lboard_t *brd, klinfo_t *kli, unsigned char type);
 extern klinfo_t *find_first_component(lboard_t *brd, unsigned char type);
-extern klcpu_t *nasid_slice_to_cpuinfo(nasid_t, int);
 extern lboard_t *find_lboard_class(lboard_t *start, unsigned char brd_class);
 
-
-extern klcpu_t *sn_get_cpuinfo(cpuid_t cpu);
-
 #endif /* _ASM_SN_KLCONFIG_H */
diff --git a/arch/mips/include/asm/sn/kldir.h b/arch/mips/include/asm/sn/kldir.h
index bfb3aec94539..245f59bf3845 100644
--- a/arch/mips/include/asm/sn/kldir.h
+++ b/arch/mips/include/asm/sn/kldir.h
@@ -1,201 +1,16 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Derived from IRIX <sys/SN/kldir.h>, revision 1.21.
- *
- * Copyright (C) 1992 - 1997, 1999, 2000 Silicon Graphics, Inc.
- * Copyright (C) 1999, 2000 by Ralf Baechle
- */
+/* SPDX-License-Identifier: GPL-2.0 */
+
 #ifndef _ASM_SN_KLDIR_H
 #define _ASM_SN_KLDIR_H
 
-
-/*
- * The kldir memory area resides at a fixed place in each node's memory and
- * provides pointers to most other IP27 memory areas.  This allows us to
- * resize and/or relocate memory areas at a later time without breaking all
- * firmware and kernels that use them.	Indices in the array are
- * permanently dedicated to areas listed below.	 Some memory areas (marked
- * below) reside at a permanently fixed location, but are included in the
- * directory for completeness.
- */
-
 #define KLDIR_MAGIC		0x434d5f53505f5357
 
-/*
- * The upper portion of the memory map applies during boot
- * only and is overwritten by IRIX/SYMMON.
- *
- *				      MEMORY MAP PER NODE
- *
- * 0x2000000 (32M)	   +-----------------------------------------+
- *			   |	  IO6 BUFFERS FOR FLASH ENET IOC3    |
- * 0x1F80000 (31.5M)	   +-----------------------------------------+
- *			   |	  IO6 TEXT/DATA/BSS/stack	     |
- * 0x1C00000 (30M)	   +-----------------------------------------+
- *			   |	  IO6 PROM DEBUG TEXT/DATA/BSS/stack |
- * 0x0800000 (28M)	   +-----------------------------------------+
- *			   |	  IP27 PROM TEXT/DATA/BSS/stack	     |
- * 0x1B00000 (27M)	   +-----------------------------------------+
- *			   |	  IP27 CFG			     |
- * 0x1A00000 (26M)	   +-----------------------------------------+
- *			   |	  Graphics PROM			     |
- * 0x1800000 (24M)	   +-----------------------------------------+
- *			   |	  3rd Party PROM drivers	     |
- * 0x1600000 (22M)	   +-----------------------------------------+
- *			   |					     |
- *			   |	  Free				     |
- *			   |					     |
- *			   +-----------------------------------------+
- *			   |	  UNIX DEBUG Version		     |
- * 0x190000 (2M--)	   +-----------------------------------------+
- *			   |	  SYMMON			     |
- *			   |	  (For UNIX Debug only)		     |
- * 0x34000 (208K)	   +-----------------------------------------+
- *			   |	  SYMMON STACK [NUM_CPU_PER_NODE]    |
- *			   |	  (For UNIX Debug only)		     |
- * 0x25000 (148K)	   +-----------------------------------------+
- *			   |	  KLCONFIG - II (temp)		     |
- *			   |					     |
- *			   |	----------------------------	     |
- *			   |					     |
- *			   |	  UNIX NON-DEBUG Version	     |
- * 0x19000 (100K)	   +-----------------------------------------+
- *
- *
- * The lower portion of the memory map contains information that is
- * permanent and is used by the IP27PROM, IO6PROM and IRIX.
- *
- * 0x19000 (100K)	   +-----------------------------------------+
- *			   |					     |
- *			   |	  PI Error Spools (32K)		     |
- *			   |					     |
- * 0x12000 (72K)	   +-----------------------------------------+
- *			   |	  Unused			     |
- * 0x11c00 (71K)	   +-----------------------------------------+
- *			   |	  CPU 1 NMI Eframe area		     |
- * 0x11a00 (70.5K)	   +-----------------------------------------+
- *			   |	  CPU 0 NMI Eframe area		     |
- * 0x11800 (70K)	   +-----------------------------------------+
- *			   |	  CPU 1 NMI Register save area	     |
- * 0x11600 (69.5K)	   +-----------------------------------------+
- *			   |	  CPU 0 NMI Register save area	     |
- * 0x11400 (69K)	   +-----------------------------------------+
- *			   |	  GDA (1k)			     |
- * 0x11000 (68K)	   +-----------------------------------------+
- *			   |	  Early cache Exception stack	     |
- *			   |		 and/or			     |
- *			   |	  kernel/io6prom nmi registers	     |
- * 0x10800  (66k)	   +-----------------------------------------+
- *			   |	  cache error eframe		     |
- * 0x10400 (65K)	   +-----------------------------------------+
- *			   |	  Exception Handlers (UALIAS copy)   |
- * 0x10000 (64K)	   +-----------------------------------------+
- *			   |					     |
- *			   |					     |
- *			   |	  KLCONFIG - I (permanent) (48K)     |
- *			   |					     |
- *			   |					     |
- *			   |					     |
- * 0x4000 (16K)		   +-----------------------------------------+
- *			   |	  NMI Handler (Protected Page)	     |
- * 0x3000 (12K)		   +-----------------------------------------+
- *			   |	  ARCS PVECTORS (master node only)   |
- * 0x2c00 (11K)		   +-----------------------------------------+
- *			   |	  ARCS TVECTORS (master node only)   |
- * 0x2800 (10K)		   +-----------------------------------------+
- *			   |	  LAUNCH [NUM_CPU]		     |
- * 0x2400 (9K)		   +-----------------------------------------+
- *			   |	  Low memory directory (KLDIR)	     |
- * 0x2000 (8K)		   +-----------------------------------------+
- *			   |	  ARCS SPB (1K)			     |
- * 0x1000 (4K)		   +-----------------------------------------+
- *			   |	  Early cache Exception stack	     |
- *			   |		 and/or			     |
- *			   |	  kernel/io6prom nmi registers	     |
- * 0x800  (2k)		   +-----------------------------------------+
- *			   |	  cache error eframe		     |
- * 0x400 (1K)		   +-----------------------------------------+
- *			   |	  Exception Handlers		     |
- * 0x0	 (0K)		   +-----------------------------------------+
- */
-
-#ifdef __ASSEMBLY__
 #define KLDIR_OFF_MAGIC			0x00
 #define KLDIR_OFF_OFFSET		0x08
 #define KLDIR_OFF_POINTER		0x10
 #define KLDIR_OFF_SIZE			0x18
 #define KLDIR_OFF_COUNT			0x20
 #define KLDIR_OFF_STRIDE		0x28
-#endif /* __ASSEMBLY__ */
-
-/*
- * This is defined here because IP27_SYMMON_STK_SIZE must be at least what
- * we define here.  Since it's set up in the prom.  We can't redefine it later
- * and expect more space to be allocated.  The way to find out the true size
- * of the symmon stacks is to divide SYMMON_STK_SIZE by SYMMON_STK_STRIDE
- * for a particular node.
- */
-#define SYMMON_STACK_SIZE		0x8000
-
-#if defined(PROM)
-
-/*
- * These defines are prom version dependent.  No code other than the IP27
- * prom should attempt to use these values.
- */
-#define IP27_LAUNCH_OFFSET		0x2400
-#define IP27_LAUNCH_SIZE		0x400
-#define IP27_LAUNCH_COUNT		2
-#define IP27_LAUNCH_STRIDE		0x200
-
-#define IP27_KLCONFIG_OFFSET		0x4000
-#define IP27_KLCONFIG_SIZE		0xc000
-#define IP27_KLCONFIG_COUNT		1
-#define IP27_KLCONFIG_STRIDE		0
-
-#define IP27_NMI_OFFSET			0x3000
-#define IP27_NMI_SIZE			0x40
-#define IP27_NMI_COUNT			2
-#define IP27_NMI_STRIDE			0x40
-
-#define IP27_PI_ERROR_OFFSET		0x12000
-#define IP27_PI_ERROR_SIZE		0x4000
-#define IP27_PI_ERROR_COUNT		1
-#define IP27_PI_ERROR_STRIDE		0
-
-#define IP27_SYMMON_STK_OFFSET		0x25000
-#define IP27_SYMMON_STK_SIZE		0xe000
-#define IP27_SYMMON_STK_COUNT		2
-/* IP27_SYMMON_STK_STRIDE must be >= SYMMON_STACK_SIZE */
-#define IP27_SYMMON_STK_STRIDE		0x7000
-
-#define IP27_FREEMEM_OFFSET		0x19000
-#define IP27_FREEMEM_SIZE		-1
-#define IP27_FREEMEM_COUNT		1
-#define IP27_FREEMEM_STRIDE		0
-
-#endif /* PROM */
-/*
- * There will be only one of these in a partition so the IO6 must set it up.
- */
-#define IO6_GDA_OFFSET			0x11000
-#define IO6_GDA_SIZE			0x400
-#define IO6_GDA_COUNT			1
-#define IO6_GDA_STRIDE			0
-
-/*
- * save area of kernel nmi regs in the prom format
- */
-#define IP27_NMI_KREGS_OFFSET		0x11400
-#define IP27_NMI_KREGS_CPU_SIZE		0x200
-/*
- * save area of kernel nmi regs in eframe format
- */
-#define IP27_NMI_EFRAME_OFFSET		0x11800
-#define IP27_NMI_EFRAME_SIZE		0x200
 
 #define KLDIR_ENT_SIZE			0x40
 #define KLDIR_MAX_ENTRIES		(0x400 / 0x40)
@@ -214,4 +29,8 @@ typedef struct kldir_ent_s {
 } kldir_ent_t;
 #endif /* !__ASSEMBLY__ */
 
+#ifdef CONFIG_SGI_IP27
+#include <asm/sn/sn0/kldir.h>
+#endif
+
 #endif /* _ASM_SN_KLDIR_H */
diff --git a/arch/mips/include/asm/sn/sn0/hub.h b/arch/mips/include/asm/sn/sn0/hub.h
index d78dd76d5dcf..c84adde36d41 100644
--- a/arch/mips/include/asm/sn/sn0/hub.h
+++ b/arch/mips/include/asm/sn/sn0/hub.h
@@ -37,4 +37,26 @@
 #define UATTR_MSPEC	2
 #define UATTR_UNCAC	3
 
+#ifdef __ASSEMBLY__
+/*
+ * Returns the local nasid into res.
+ */
+	.macro GET_NASID_ASM res
+	dli	\res, LOCAL_HUB_ADDR(NI_STATUS_REV_ID)
+	ld	\res, (\res)
+	and	\res, NSRI_NODEID_MASK
+	dsrl	\res, NSRI_NODEID_SHFT
+	.endm
+#else
+
+/*
+ * get_nasid() returns the physical node id number of the caller.
+ */
+static inline nasid_t get_nasid(void)
+{
+	return (nasid_t)((LOCAL_HUB_L(NI_STATUS_REV_ID) & NSRI_NODEID_MASK)
+			 >> NSRI_NODEID_SHFT);
+}
+#endif
+
 #endif /* _ASM_SN_SN0_HUB_H */
diff --git a/arch/mips/include/asm/sn/sn0/hubni.h b/arch/mips/include/asm/sn/sn0/hubni.h
index b73c4bee65f2..b8253142cb83 100644
--- a/arch/mips/include/asm/sn/sn0/hubni.h
+++ b/arch/mips/include/asm/sn/sn0/hubni.h
@@ -250,6 +250,14 @@ typedef union	hubni_port_error_u {
 #define NI_LLP_CB_MAX		0xff
 #define NI_LLP_SN_MAX		0xff
 
+static inline int get_region_shift(void)
+{
+	if (LOCAL_HUB_L(NI_STATUS_REV_ID) & NSRI_REGIONSIZE_MASK)
+		return NASID_TO_FINEREG_SHFT;
+
+	return NASID_TO_COARSEREG_SHFT;
+}
+
 #endif /* !__ASSEMBLY__ */
 
 #endif /* _ASM_SGI_SN0_HUBNI_H */
diff --git a/arch/mips/include/asm/sn/sn0/ip27.h b/arch/mips/include/asm/sn/sn0/ip27.h
deleted file mode 100644
index 3b5efeefcc3f..000000000000
--- a/arch/mips/include/asm/sn/sn0/ip27.h
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Derived from IRIX <sys/SN/SN0/IP27.h>.
- *
- * Copyright (C) 1992 - 1997, 1999 Silicon Graphics, Inc.
- * Copyright (C) 1999, 2006 by Ralf Baechle
- */
-#ifndef _ASM_SN_SN0_IP27_H
-#define _ASM_SN_SN0_IP27_H
-
-#include <asm/mipsregs.h>
-
-/*
- * Simple definitions for the masks which remove SW bits from pte.
- */
-
-#define TLBLO_HWBITSHIFT	0		/* Shift value, for masking */
-
-#ifndef __ASSEMBLY__
-
-#define CAUSE_BERRINTR		IE_IRQ5
-
-#define ECCF_CACHE_ERR	0
-#define ECCF_TAGLO	1
-#define ECCF_ECC	2
-#define ECCF_ERROREPC	3
-#define ECCF_PADDR	4
-#define ECCF_SIZE	(5 * sizeof(long))
-
-#endif /* !__ASSEMBLY__ */
-
-#ifdef __ASSEMBLY__
-
-/*
- * KL_GET_CPUNUM (similar to EV_GET_SPNUM for EVEREST platform) reads
- * the processor number of the calling processor.  The proc parameters
- * must be a register.
- */
-#define KL_GET_CPUNUM(proc)				\
-	dli	proc, LOCAL_HUB(0);			\
-	ld	proc, PI_CPU_NUM(proc)
-
-#endif /* __ASSEMBLY__ */
-
-/*
- * R10000 status register interrupt bit mask usage for IP27.
- */
-#define SRB_SWTIMO	IE_SW0		/* 0x0100 */
-#define SRB_NET		IE_SW1		/* 0x0200 */
-#define SRB_DEV0	IE_IRQ0		/* 0x0400 */
-#define SRB_DEV1	IE_IRQ1		/* 0x0800 */
-#define SRB_TIMOCLK	IE_IRQ2		/* 0x1000 */
-#define SRB_PROFCLK	IE_IRQ3		/* 0x2000 */
-#define SRB_ERR		IE_IRQ4		/* 0x4000 */
-#define SRB_SCHEDCLK	IE_IRQ5		/* 0x8000 */
-
-#define SR_IBIT_HI	SRB_DEV0
-#define SR_IBIT_PROF	SRB_PROFCLK
-
-#define SRB_SWTIMO_IDX		0
-#define SRB_NET_IDX		1
-#define SRB_DEV0_IDX		2
-#define SRB_DEV1_IDX		3
-#define SRB_TIMOCLK_IDX		4
-#define SRB_PROFCLK_IDX		5
-#define SRB_ERR_IDX		6
-#define SRB_SCHEDCLK_IDX	7
-
-#define NUM_CAUSE_INTRS		8
-
-#define SCACHE_LINESIZE 128
-#define SCACHE_LINEMASK (SCACHE_LINESIZE - 1)
-
-#include <asm/sn/addrs.h>
-
-#define LED_CYCLE_MASK	0x0f
-#define LED_CYCLE_SHFT	4
-
-#define SEND_NMI(_nasid, _slice)	\
-	  REMOTE_HUB_S((_nasid),  (PI_NMI_A + ((_slice) * PI_NMI_OFFSET)), 1)
-
-#endif /* _ASM_SN_SN0_IP27_H */
diff --git a/arch/mips/include/asm/sn/sn0/kldir.h b/arch/mips/include/asm/sn/sn0/kldir.h
new file mode 100644
index 000000000000..1b10af6cbd5e
--- /dev/null
+++ b/arch/mips/include/asm/sn/sn0/kldir.h
@@ -0,0 +1,186 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Derived from IRIX <sys/SN/kldir.h>, revision 1.21.
+ *
+ * Copyright (C) 1992 - 1997, 1999, 2000 Silicon Graphics, Inc.
+ * Copyright (C) 1999, 2000 by Ralf Baechle
+ */
+#ifndef _ASM_SN_SN0_KLDIR_H
+#define _ASM_SN_SN0_KLDIR_H
+
+
+/*
+ * The kldir memory area resides at a fixed place in each node's memory and
+ * provides pointers to most other IP27 memory areas.  This allows us to
+ * resize and/or relocate memory areas at a later time without breaking all
+ * firmware and kernels that use them.	Indices in the array are
+ * permanently dedicated to areas listed below.	 Some memory areas (marked
+ * below) reside at a permanently fixed location, but are included in the
+ * directory for completeness.
+ */
+
+/*
+ * The upper portion of the memory map applies during boot
+ * only and is overwritten by IRIX/SYMMON.
+ *
+ *				      MEMORY MAP PER NODE
+ *
+ * 0x2000000 (32M)	   +-----------------------------------------+
+ *			   |	  IO6 BUFFERS FOR FLASH ENET IOC3    |
+ * 0x1F80000 (31.5M)	   +-----------------------------------------+
+ *			   |	  IO6 TEXT/DATA/BSS/stack	     |
+ * 0x1C00000 (30M)	   +-----------------------------------------+
+ *			   |	  IO6 PROM DEBUG TEXT/DATA/BSS/stack |
+ * 0x0800000 (28M)	   +-----------------------------------------+
+ *			   |	  IP27 PROM TEXT/DATA/BSS/stack	     |
+ * 0x1B00000 (27M)	   +-----------------------------------------+
+ *			   |	  IP27 CFG			     |
+ * 0x1A00000 (26M)	   +-----------------------------------------+
+ *			   |	  Graphics PROM			     |
+ * 0x1800000 (24M)	   +-----------------------------------------+
+ *			   |	  3rd Party PROM drivers	     |
+ * 0x1600000 (22M)	   +-----------------------------------------+
+ *			   |					     |
+ *			   |	  Free				     |
+ *			   |					     |
+ *			   +-----------------------------------------+
+ *			   |	  UNIX DEBUG Version		     |
+ * 0x190000 (2M--)	   +-----------------------------------------+
+ *			   |	  SYMMON			     |
+ *			   |	  (For UNIX Debug only)		     |
+ * 0x34000 (208K)	   +-----------------------------------------+
+ *			   |	  SYMMON STACK [NUM_CPU_PER_NODE]    |
+ *			   |	  (For UNIX Debug only)		     |
+ * 0x25000 (148K)	   +-----------------------------------------+
+ *			   |	  KLCONFIG - II (temp)		     |
+ *			   |					     |
+ *			   |	----------------------------	     |
+ *			   |					     |
+ *			   |	  UNIX NON-DEBUG Version	     |
+ * 0x19000 (100K)	   +-----------------------------------------+
+ *
+ *
+ * The lower portion of the memory map contains information that is
+ * permanent and is used by the IP27PROM, IO6PROM and IRIX.
+ *
+ * 0x19000 (100K)	   +-----------------------------------------+
+ *			   |					     |
+ *			   |	  PI Error Spools (32K)		     |
+ *			   |					     |
+ * 0x12000 (72K)	   +-----------------------------------------+
+ *			   |	  Unused			     |
+ * 0x11c00 (71K)	   +-----------------------------------------+
+ *			   |	  CPU 1 NMI Eframe area		     |
+ * 0x11a00 (70.5K)	   +-----------------------------------------+
+ *			   |	  CPU 0 NMI Eframe area		     |
+ * 0x11800 (70K)	   +-----------------------------------------+
+ *			   |	  CPU 1 NMI Register save area	     |
+ * 0x11600 (69.5K)	   +-----------------------------------------+
+ *			   |	  CPU 0 NMI Register save area	     |
+ * 0x11400 (69K)	   +-----------------------------------------+
+ *			   |	  GDA (1k)			     |
+ * 0x11000 (68K)	   +-----------------------------------------+
+ *			   |	  Early cache Exception stack	     |
+ *			   |		 and/or			     |
+ *			   |	  kernel/io6prom nmi registers	     |
+ * 0x10800  (66k)	   +-----------------------------------------+
+ *			   |	  cache error eframe		     |
+ * 0x10400 (65K)	   +-----------------------------------------+
+ *			   |	  Exception Handlers (UALIAS copy)   |
+ * 0x10000 (64K)	   +-----------------------------------------+
+ *			   |					     |
+ *			   |					     |
+ *			   |	  KLCONFIG - I (permanent) (48K)     |
+ *			   |					     |
+ *			   |					     |
+ *			   |					     |
+ * 0x4000 (16K)		   +-----------------------------------------+
+ *			   |	  NMI Handler (Protected Page)	     |
+ * 0x3000 (12K)		   +-----------------------------------------+
+ *			   |	  ARCS PVECTORS (master node only)   |
+ * 0x2c00 (11K)		   +-----------------------------------------+
+ *			   |	  ARCS TVECTORS (master node only)   |
+ * 0x2800 (10K)		   +-----------------------------------------+
+ *			   |	  LAUNCH [NUM_CPU]		     |
+ * 0x2400 (9K)		   +-----------------------------------------+
+ *			   |	  Low memory directory (KLDIR)	     |
+ * 0x2000 (8K)		   +-----------------------------------------+
+ *			   |	  ARCS SPB (1K)			     |
+ * 0x1000 (4K)		   +-----------------------------------------+
+ *			   |	  Early cache Exception stack	     |
+ *			   |		 and/or			     |
+ *			   |	  kernel/io6prom nmi registers	     |
+ * 0x800  (2k)		   +-----------------------------------------+
+ *			   |	  cache error eframe		     |
+ * 0x400 (1K)		   +-----------------------------------------+
+ *			   |	  Exception Handlers		     |
+ * 0x0	 (0K)		   +-----------------------------------------+
+ */
+
+/*
+ * This is defined here because IP27_SYMMON_STK_SIZE must be at least what
+ * we define here.  Since it's set up in the prom.  We can't redefine it later
+ * and expect more space to be allocated.  The way to find out the true size
+ * of the symmon stacks is to divide SYMMON_STK_SIZE by SYMMON_STK_STRIDE
+ * for a particular node.
+ */
+#define SYMMON_STACK_SIZE		0x8000
+
+#if defined(PROM)
+
+/*
+ * These defines are prom version dependent.  No code other than the IP27
+ * prom should attempt to use these values.
+ */
+#define IP27_LAUNCH_OFFSET		0x2400
+#define IP27_LAUNCH_SIZE		0x400
+#define IP27_LAUNCH_COUNT		2
+#define IP27_LAUNCH_STRIDE		0x200
+
+#define IP27_KLCONFIG_OFFSET		0x4000
+#define IP27_KLCONFIG_SIZE		0xc000
+#define IP27_KLCONFIG_COUNT		1
+#define IP27_KLCONFIG_STRIDE		0
+
+#define IP27_NMI_OFFSET			0x3000
+#define IP27_NMI_SIZE			0x40
+#define IP27_NMI_COUNT			2
+#define IP27_NMI_STRIDE			0x40
+
+#define IP27_PI_ERROR_OFFSET		0x12000
+#define IP27_PI_ERROR_SIZE		0x4000
+#define IP27_PI_ERROR_COUNT		1
+#define IP27_PI_ERROR_STRIDE		0
+
+#define IP27_SYMMON_STK_OFFSET		0x25000
+#define IP27_SYMMON_STK_SIZE		0xe000
+#define IP27_SYMMON_STK_COUNT		2
+/* IP27_SYMMON_STK_STRIDE must be >= SYMMON_STACK_SIZE */
+#define IP27_SYMMON_STK_STRIDE		0x7000
+
+#define IP27_FREEMEM_OFFSET		0x19000
+#define IP27_FREEMEM_SIZE		-1
+#define IP27_FREEMEM_COUNT		1
+#define IP27_FREEMEM_STRIDE		0
+
+#endif /* PROM */
+/*
+ * There will be only one of these in a partition so the IO6 must set it up.
+ */
+#define IO6_GDA_OFFSET			0x11000
+#define IO6_GDA_SIZE			0x400
+#define IO6_GDA_COUNT			1
+#define IO6_GDA_STRIDE			0
+
+/*
+ * save area of kernel nmi regs in the prom format
+ */
+#define IP27_NMI_KREGS_OFFSET		0x11400
+#define IP27_NMI_KREGS_CPU_SIZE		0x200
+/*
+ * save area of kernel nmi regs in eframe format
+ */
+#define IP27_NMI_EFRAME_OFFSET		0x11800
+#define IP27_NMI_EFRAME_SIZE		0x200
+
+#endif /* _ASM_SN_SN0_KLDIR_H */
diff --git a/arch/mips/include/asm/sn/sn_private.h b/arch/mips/include/asm/sn/sn_private.h
deleted file mode 100644
index 63a2c30d81c6..000000000000
--- a/arch/mips/include/asm/sn/sn_private.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SN_SN_PRIVATE_H
-#define __ASM_SN_SN_PRIVATE_H
-
-#include <asm/sn/types.h>
-
-extern nasid_t master_nasid;
-
-extern void cpu_node_probe(void);
-extern void hub_rtc_init(nasid_t nasid);
-extern void cpu_time_init(void);
-extern void per_cpu_init(void);
-extern void install_cpu_nmi_handler(int slice);
-extern void install_ipi(void);
-extern void setup_replication_mask(void);
-extern void replicate_kernel_text(void);
-extern unsigned long node_getfirstfree(nasid_t nasid);
-
-#endif /* __ASM_SN_SN_PRIVATE_H */
diff --git a/arch/mips/include/asm/sn/types.h b/arch/mips/include/asm/sn/types.h
index 203c927e84d1..451ba1ee41ad 100644
--- a/arch/mips/include/asm/sn/types.h
+++ b/arch/mips/include/asm/sn/types.h
@@ -11,6 +11,8 @@
 
 #include <linux/types.h>
 
+#ifndef __ASSEMBLY__
+
 typedef unsigned long	cpuid_t;
 typedef signed short	nasid_t;	/* node id in numa-as-id space */
 typedef signed char	partid_t;	/* partition ID type */
@@ -18,4 +20,6 @@ typedef signed short	moduleid_t;	/* user-visible module number type */
 
 typedef dev_t		vertex_hdl_t;	/* hardware graph vertex handle */
 
+#endif
+
 #endif /* _ASM_SN_TYPES_H */
diff --git a/arch/mips/jz4740/Kconfig b/arch/mips/jz4740/Kconfig
index 4dd0c446ecec..412d2faa3cdf 100644
--- a/arch/mips/jz4740/Kconfig
+++ b/arch/mips/jz4740/Kconfig
@@ -16,6 +16,10 @@ config JZ4780_CI20
 	bool "MIPS Creator CI20"
 	select MACH_JZ4780
 
+config X1000_CU1000_NEO
+	bool "YSH & ATIL CU1000 Module with Neo backplane"
+	select MACH_X1000
+
 endchoice
 
 config MACH_JZ4740
@@ -33,3 +37,9 @@ config MACH_JZ4780
 	select MIPS_CPU_SCACHE
 	select SYS_HAS_CPU_MIPS32_R2
 	select SYS_SUPPORTS_HIGHMEM
+
+config MACH_X1000
+	bool
+	select MIPS_CPU_SCACHE
+	select SYS_HAS_CPU_MIPS32_R2
+	select SYS_SUPPORTS_HIGHMEM
diff --git a/arch/mips/jz4740/setup.c b/arch/mips/jz4740/setup.c
index dc8ee21e0948..880c26857aff 100644
--- a/arch/mips/jz4740/setup.c
+++ b/arch/mips/jz4740/setup.c
@@ -44,6 +44,8 @@ static void __init jz4740_detect_mem(void)
 
 static unsigned long __init get_board_mach_type(const void *fdt)
 {
+	if (!fdt_node_check_compatible(fdt, 0, "ingenic,x1830"))
+		return MACH_INGENIC_X1830;
 	if (!fdt_node_check_compatible(fdt, 0, "ingenic,x1000"))
 		return MACH_INGENIC_X1000;
 	if (!fdt_node_check_compatible(fdt, 0, "ingenic,jz4780"))
@@ -86,6 +88,8 @@ void __init device_tree_init(void)
 const char *get_system_type(void)
 {
 	switch (mips_machtype) {
+	case MACH_INGENIC_X1830:
+		return "X1830";
 	case MACH_INGENIC_X1000:
 		return "X1000";
 	case MACH_INGENIC_JZ4780:
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index c54332697673..6ab6b03d35ba 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -102,7 +102,12 @@ static void cpu_set_fpu_2008(struct cpuinfo_mips *c)
 		if (fir & MIPS_FPIR_HAS2008) {
 			fcsr = read_32bit_cp1_register(CP1_STATUS);
 
-			fcsr0 = fcsr & ~(FPU_CSR_ABS2008 | FPU_CSR_NAN2008);
+			/*
+			 * MAC2008 toolchain never landed in real world, so we're only
+			 * testing wether it can be disabled and don't try to enabled
+			 * it.
+			 */
+			fcsr0 = fcsr & ~(FPU_CSR_ABS2008 | FPU_CSR_NAN2008 | FPU_CSR_MAC2008);
 			write_32bit_cp1_register(CP1_STATUS, fcsr0);
 			fcsr0 = read_32bit_cp1_register(CP1_STATUS);
 
@@ -112,6 +117,15 @@ static void cpu_set_fpu_2008(struct cpuinfo_mips *c)
 
 			write_32bit_cp1_register(CP1_STATUS, fcsr);
 
+			if (c->isa_level & (MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2)) {
+				/*
+				 * The bit for MAC2008 might be reused by R6 in future,
+				 * so we only test for R2-R5.
+				 */
+				if (fcsr0 & FPU_CSR_MAC2008)
+					c->options |= MIPS_CPU_MAC_2008_ONLY;
+			}
+
 			if (!(fcsr0 & FPU_CSR_NAN2008))
 				c->options |= MIPS_CPU_NAN_LEGACY;
 			if (fcsr1 & FPU_CSR_NAN2008)
@@ -1960,10 +1974,8 @@ static inline void cpu_probe_ingenic(struct cpuinfo_mips *c, unsigned int cpu)
 	BUG_ON(!__builtin_constant_p(cpu_has_counter) || cpu_has_counter);
 
 	switch (c->processor_id & PRID_IMP_MASK) {
-	case PRID_IMP_XBURST:
-		c->cputype = CPU_XBURST;
-		c->writecombine = _CACHE_UNCACHED_ACCELERATED;
-		__cpu_name[cpu] = "Ingenic JZRISC";
+	case PRID_IMP_XBURST_REV1:
+
 		/*
 		 * The XBurst core by default attempts to avoid branch target
 		 * buffer lookups by detecting & special casing loops. This
@@ -1971,34 +1983,43 @@ static inline void cpu_probe_ingenic(struct cpuinfo_mips *c, unsigned int cpu)
 		 * Set cp0 config7 bit 4 to disable this feature.
 		 */
 		set_c0_config7(MIPS_CONF7_BTB_LOOP_EN);
-		break;
-	default:
-		panic("Unknown Ingenic Processor ID!");
-		break;
-	}
 
-	switch (c->processor_id & PRID_COMP_MASK) {
-	/*
-	 * The config0 register in the XBurst CPUs with a processor ID of
-	 * PRID_COMP_INGENIC_D1 has an abandoned huge page tlb mode, this
-	 * mode is not compatible with the MIPS standard, it will cause
-	 * tlbmiss and into an infinite loop (line 21 in the tlb-funcs.S)
-	 * when starting the init process. After chip reset, the default
-	 * is HPTLB mode, Write 0xa9000000 to cp0 register 5 sel 4 to
-	 * switch back to VTLB mode to prevent getting stuck.
-	 */
-	case PRID_COMP_INGENIC_D1:
-		write_c0_page_ctrl(XBURST_PAGECTRL_HPTLB_DIS);
-		break;
-	/*
-	 * The config0 register in the XBurst CPUs with a processor ID of
-	 * PRID_COMP_INGENIC_D0 report themselves as MIPS32r2 compatible,
-	 * but they don't actually support this ISA.
-	 */
-	case PRID_COMP_INGENIC_D0:
-		c->isa_level &= ~MIPS_CPU_ISA_M32R2;
+		switch (c->processor_id & PRID_COMP_MASK) {
+
+		/*
+		 * The config0 register in the XBurst CPUs with a processor ID of
+		 * PRID_COMP_INGENIC_D0 report themselves as MIPS32r2 compatible,
+		 * but they don't actually support this ISA.
+		 */
+		case PRID_COMP_INGENIC_D0:
+			c->isa_level &= ~MIPS_CPU_ISA_M32R2;
+			break;
+
+		/*
+		 * The config0 register in the XBurst CPUs with a processor ID of
+		 * PRID_COMP_INGENIC_D1 has an abandoned huge page tlb mode, this
+		 * mode is not compatible with the MIPS standard, it will cause
+		 * tlbmiss and into an infinite loop (line 21 in the tlb-funcs.S)
+		 * when starting the init process. After chip reset, the default
+		 * is HPTLB mode, Write 0xa9000000 to cp0 register 5 sel 4 to
+		 * switch back to VTLB mode to prevent getting stuck.
+		 */
+		case PRID_COMP_INGENIC_D1:
+			write_c0_page_ctrl(XBURST_PAGECTRL_HPTLB_DIS);
+			break;
+
+		default:
+			break;
+		}
+	/* fall-through */
+	case PRID_IMP_XBURST_REV2:
+		c->cputype = CPU_XBURST;
+		c->writecombine = _CACHE_UNCACHED_ACCELERATED;
+		__cpu_name[cpu] = "Ingenic XBurst";
 		break;
+
 	default:
+		panic("Unknown Ingenic Processor ID!");
 		break;
 	}
 }
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index c3d4212b5f1d..1ac2752fb791 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -515,8 +515,7 @@ static void __init request_crashkernel(struct resource *res)
 	ret = request_resource(res, &crashk_res);
 	if (!ret)
 		pr_info("Reserving %ldMB of memory at %ldMB for crashkernel\n",
-			(unsigned long)((crashk_res.end -
-					 crashk_res.start + 1) >> 20),
+			(unsigned long)(resource_size(&crashk_res) >> 20),
 			(unsigned long)(crashk_res.start  >> 20));
 }
 #else /* !defined(CONFIG_KEXEC)		*/
@@ -698,8 +697,7 @@ static void __init arch_mem_init(char **cmdline_p)
 	mips_parse_crashkernel();
 #ifdef CONFIG_KEXEC
 	if (crashk_res.start != crashk_res.end)
-		memblock_reserve(crashk_res.start,
-				 crashk_res.end - crashk_res.start + 1);
+		memblock_reserve(crashk_res.start, resource_size(&crashk_res));
 #endif
 	device_tree_init();
 	sparse_init();
@@ -796,8 +794,6 @@ void __init setup_arch(char **cmdline_p)
 #if defined(CONFIG_VT)
 #if defined(CONFIG_VGA_CONSOLE)
 	conswitchp = &vga_con;
-#elif defined(CONFIG_DUMMY_CONSOLE)
-	conswitchp = &dummy_con;
 #endif
 #endif
 
diff --git a/arch/mips/kernel/sync-r4k.c b/arch/mips/kernel/sync-r4k.c
index f2973ce87f53..abdd7aaa3311 100644
--- a/arch/mips/kernel/sync-r4k.c
+++ b/arch/mips/kernel/sync-r4k.c
@@ -90,6 +90,9 @@ void synchronise_count_master(int cpu)
 void synchronise_count_slave(int cpu)
 {
 	int i;
+	unsigned long flags;
+
+	local_irq_save(flags);
 
 	/*
 	 * Not every cpu is online at the time this gets called,
@@ -113,5 +116,7 @@ void synchronise_count_slave(int cpu)
 	}
 	/* Arrange for an interrupt in a short while */
 	write_c0_compare(read_c0_count() + COUNTON);
+
+	local_irq_restore(flags);
 }
 #undef NR_LOOPS
diff --git a/arch/mips/kernel/syscalls/Makefile b/arch/mips/kernel/syscalls/Makefile
index a3d4bec695c6..6efb2f6889a7 100644
--- a/arch/mips/kernel/syscalls/Makefile
+++ b/arch/mips/kernel/syscalls/Makefile
@@ -18,7 +18,7 @@ quiet_cmd_syshdr = SYSHDR  $@
 		   '$(syshdr_pfx_$(basetarget))'		\
 		   '$(syshdr_offset_$(basetarget))'
 
-quiet_cmd_sysnr = SYSNR  $@
+quiet_cmd_sysnr = SYSNR   $@
       cmd_sysnr = $(CONFIG_SHELL) '$(sysnr)' '$<' '$@'		\
 		  '$(sysnr_abis_$(basetarget))'			\
 		  '$(sysnr_pfx_$(basetarget))'			\
diff --git a/arch/mips/kernel/syscalls/syscall_n32.tbl b/arch/mips/kernel/syscalls/syscall_n32.tbl
index e7c5ab38e403..1f9e8ad636cc 100644
--- a/arch/mips/kernel/syscalls/syscall_n32.tbl
+++ b/arch/mips/kernel/syscalls/syscall_n32.tbl
@@ -374,3 +374,5 @@
 433	n32	fspick				sys_fspick
 434	n32	pidfd_open			sys_pidfd_open
 435	n32	clone3				__sys_clone3
+437	n32	openat2				sys_openat2
+438	n32	pidfd_getfd			sys_pidfd_getfd
diff --git a/arch/mips/kernel/syscalls/syscall_n64.tbl b/arch/mips/kernel/syscalls/syscall_n64.tbl
index 13cd66581f3b..c0b9d802dbf6 100644
--- a/arch/mips/kernel/syscalls/syscall_n64.tbl
+++ b/arch/mips/kernel/syscalls/syscall_n64.tbl
@@ -350,3 +350,5 @@
 433	n64	fspick				sys_fspick
 434	n64	pidfd_open			sys_pidfd_open
 435	n64	clone3				__sys_clone3
+437	n64	openat2				sys_openat2
+438	n64	pidfd_getfd			sys_pidfd_getfd
diff --git a/arch/mips/kernel/syscalls/syscall_o32.tbl b/arch/mips/kernel/syscalls/syscall_o32.tbl
index 353539ea4140..ac586774c980 100644
--- a/arch/mips/kernel/syscalls/syscall_o32.tbl
+++ b/arch/mips/kernel/syscalls/syscall_o32.tbl
@@ -423,3 +423,5 @@
 433	o32	fspick				sys_fspick
 434	o32	pidfd_open			sys_pidfd_open
 435	o32	clone3				__sys_clone3
+437	o32	openat2				sys_openat2
+438	o32	pidfd_getfd			sys_pidfd_getfd
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index 83f2a437d9e2..31968cbd6464 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -210,11 +210,6 @@ void show_stack(struct task_struct *task, unsigned long *sp)
 			regs.regs[29] = task->thread.reg29;
 			regs.regs[31] = 0;
 			regs.cp0_epc = task->thread.reg31;
-#ifdef CONFIG_KGDB_KDB
-		} else if (atomic_read(&kgdb_active) != -1 &&
-			   kdb_current_regs) {
-			memcpy(&regs, kdb_current_regs, sizeof(regs));
-#endif /* CONFIG_KGDB_KDB */
 		} else {
 			prepare_frametrace(&regs);
 		}
diff --git a/arch/mips/kernel/unaligned.c b/arch/mips/kernel/unaligned.c
index 92bd2b0f0548..ca6fc4762d97 100644
--- a/arch/mips/kernel/unaligned.c
+++ b/arch/mips/kernel/unaligned.c
@@ -131,7 +131,7 @@ do {                                                        \
 			: "r" (addr), "i" (-EFAULT));       \
 } while(0)
 
-#ifdef CONFIG_CPU_HAS_LOAD_STORE_LR
+#ifndef CONFIG_CPU_NO_LOAD_STORE_LR
 #define     _LoadW(addr, value, res, type)   \
 do {                                                        \
 		__asm__ __volatile__ (                      \
@@ -152,7 +152,7 @@ do {                                                        \
 			: "r" (addr), "i" (-EFAULT));       \
 } while(0)
 
-#else /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
+#else /* CONFIG_CPU_NO_LOAD_STORE_LR */
 /* For CPUs without lwl instruction */
 #define     _LoadW(addr, value, res, type) \
 do {                                                        \
@@ -187,7 +187,7 @@ do {                                                        \
 			: "r" (addr), "i" (-EFAULT));       \
 } while(0)
 
-#endif /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
+#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
 
 #define     _LoadHWU(addr, value, res, type) \
 do {                                                        \
@@ -213,7 +213,7 @@ do {                                                        \
 			: "r" (addr), "i" (-EFAULT));       \
 } while(0)
 
-#ifdef CONFIG_CPU_HAS_LOAD_STORE_LR
+#ifndef CONFIG_CPU_NO_LOAD_STORE_LR
 #define     _LoadWU(addr, value, res, type)  \
 do {                                                        \
 		__asm__ __volatile__ (                      \
@@ -256,7 +256,7 @@ do {                                                        \
 			: "r" (addr), "i" (-EFAULT));       \
 } while(0)
 
-#else /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
+#else /* CONFIG_CPU_NO_LOAD_STORE_LR */
 /* For CPUs without lwl and ldl instructions */
 #define	    _LoadWU(addr, value, res, type) \
 do {                                                        \
@@ -340,7 +340,7 @@ do {                                                        \
 			: "r" (addr), "i" (-EFAULT));       \
 } while(0)
 
-#endif /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
+#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
 
 
 #define     _StoreHW(addr, value, res, type) \
@@ -366,7 +366,7 @@ do {                                                        \
 			: "r" (value), "r" (addr), "i" (-EFAULT));\
 } while(0)
 
-#ifdef CONFIG_CPU_HAS_LOAD_STORE_LR
+#ifndef CONFIG_CPU_NO_LOAD_STORE_LR
 #define     _StoreW(addr, value, res, type)  \
 do {                                                        \
 		__asm__ __volatile__ (                      \
@@ -407,7 +407,7 @@ do {                                                        \
 		: "r" (value), "r" (addr), "i" (-EFAULT));  \
 } while(0)
 
-#else /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
+#else /* CONFIG_CPU_NO_LOAD_STORE_LR */
 #define     _StoreW(addr, value, res, type)  \
 do {                                                        \
 		__asm__ __volatile__ (                      \
@@ -483,7 +483,7 @@ do {                                                        \
 		: "memory");                                \
 } while(0)
 
-#endif /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
+#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
 
 #else /* __BIG_ENDIAN */
 
@@ -509,7 +509,7 @@ do {                                                        \
 			: "r" (addr), "i" (-EFAULT));       \
 } while(0)
 
-#ifdef CONFIG_CPU_HAS_LOAD_STORE_LR
+#ifndef CONFIG_CPU_NO_LOAD_STORE_LR
 #define     _LoadW(addr, value, res, type)   \
 do {                                                        \
 		__asm__ __volatile__ (                      \
@@ -530,7 +530,7 @@ do {                                                        \
 			: "r" (addr), "i" (-EFAULT));       \
 } while(0)
 
-#else  /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
+#else /* CONFIG_CPU_NO_LOAD_STORE_LR */
 /* For CPUs without lwl instruction */
 #define     _LoadW(addr, value, res, type) \
 do {                                                        \
@@ -565,7 +565,7 @@ do {                                                        \
 			: "r" (addr), "i" (-EFAULT));       \
 } while(0)
 
-#endif /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
+#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
 
 
 #define     _LoadHWU(addr, value, res, type) \
@@ -592,7 +592,7 @@ do {                                                        \
 			: "r" (addr), "i" (-EFAULT));       \
 } while(0)
 
-#ifdef CONFIG_CPU_HAS_LOAD_STORE_LR
+#ifndef CONFIG_CPU_NO_LOAD_STORE_LR
 #define     _LoadWU(addr, value, res, type)  \
 do {                                                        \
 		__asm__ __volatile__ (                      \
@@ -635,7 +635,7 @@ do {                                                        \
 			: "r" (addr), "i" (-EFAULT));       \
 } while(0)
 
-#else /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
+#else /* CONFIG_CPU_NO_LOAD_STORE_LR */
 /* For CPUs without lwl and ldl instructions */
 #define	    _LoadWU(addr, value, res, type) \
 do {                                                        \
@@ -718,7 +718,7 @@ do {                                                        \
 			: "=&r" (value), "=r" (res)	    \
 			: "r" (addr), "i" (-EFAULT));       \
 } while(0)
-#endif /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
+#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
 
 #define     _StoreHW(addr, value, res, type) \
 do {                                                        \
@@ -743,7 +743,7 @@ do {                                                        \
 			: "r" (value), "r" (addr), "i" (-EFAULT));\
 } while(0)
 
-#ifdef CONFIG_CPU_HAS_LOAD_STORE_LR
+#ifndef CONFIG_CPU_NO_LOAD_STORE_LR
 #define     _StoreW(addr, value, res, type)  \
 do {                                                        \
 		__asm__ __volatile__ (                      \
@@ -784,7 +784,7 @@ do {                                                        \
 		: "r" (value), "r" (addr), "i" (-EFAULT));  \
 } while(0)
 
-#else /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
+#else /* CONFIG_CPU_NO_LOAD_STORE_LR */
 /* For CPUs without swl and sdl instructions */
 #define     _StoreW(addr, value, res, type)  \
 do {                                                        \
@@ -861,7 +861,7 @@ do {                                                        \
 		: "memory");                                \
 } while(0)
 
-#endif /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
+#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
 #endif
 
 #define LoadHWU(addr, value, res)	_LoadHWU(addr, value, res, kernel)
diff --git a/arch/mips/kvm/mips.c b/arch/mips/kvm/mips.c
index 1109924560d8..71244bf87c3a 100644
--- a/arch/mips/kvm/mips.c
+++ b/arch/mips/kvm/mips.c
@@ -156,7 +156,7 @@ void kvm_mips_free_vcpus(struct kvm *kvm)
 	struct kvm_vcpu *vcpu;
 
 	kvm_for_each_vcpu(i, vcpu, kvm) {
-		kvm_arch_vcpu_free(vcpu);
+		kvm_vcpu_destroy(vcpu);
 	}
 
 	mutex_lock(&kvm->lock);
@@ -280,25 +280,43 @@ static inline void dump_handler(const char *symbol, void *start, void *end)
 	pr_debug("\tEND(%s)\n", symbol);
 }
 
-struct kvm_vcpu *kvm_arch_vcpu_create(struct kvm *kvm, unsigned int id)
+/* low level hrtimer wake routine */
+static enum hrtimer_restart kvm_mips_comparecount_wakeup(struct hrtimer *timer)
+{
+	struct kvm_vcpu *vcpu;
+
+	vcpu = container_of(timer, struct kvm_vcpu, arch.comparecount_timer);
+
+	kvm_mips_callbacks->queue_timer_int(vcpu);
+
+	vcpu->arch.wait = 0;
+	if (swq_has_sleeper(&vcpu->wq))
+		swake_up_one(&vcpu->wq);
+
+	return kvm_mips_count_timeout(vcpu);
+}
+
+int kvm_arch_vcpu_precreate(struct kvm *kvm, unsigned int id)
+{
+	return 0;
+}
+
+int kvm_arch_vcpu_create(struct kvm_vcpu *vcpu)
 {
 	int err, size;
 	void *gebase, *p, *handler, *refill_start, *refill_end;
 	int i;
 
-	struct kvm_vcpu *vcpu = kzalloc(sizeof(struct kvm_vcpu), GFP_KERNEL);
-
-	if (!vcpu) {
-		err = -ENOMEM;
-		goto out;
-	}
-
-	err = kvm_vcpu_init(vcpu, kvm, id);
+	kvm_debug("kvm @ %p: create cpu %d at %p\n",
+		  vcpu->kvm, vcpu->vcpu_id, vcpu);
 
+	err = kvm_mips_callbacks->vcpu_init(vcpu);
 	if (err)
-		goto out_free_cpu;
+		return err;
 
-	kvm_debug("kvm @ %p: create cpu %d at %p\n", kvm, id, vcpu);
+	hrtimer_init(&vcpu->arch.comparecount_timer, CLOCK_MONOTONIC,
+		     HRTIMER_MODE_REL);
+	vcpu->arch.comparecount_timer.function = kvm_mips_comparecount_wakeup;
 
 	/*
 	 * Allocate space for host mode exception handlers that handle
@@ -313,7 +331,7 @@ struct kvm_vcpu *kvm_arch_vcpu_create(struct kvm *kvm, unsigned int id)
 
 	if (!gebase) {
 		err = -ENOMEM;
-		goto out_uninit_cpu;
+		goto out_uninit_vcpu;
 	}
 	kvm_debug("Allocated %d bytes for KVM Exception Handlers @ %p\n",
 		  ALIGN(size, PAGE_SIZE), gebase);
@@ -392,38 +410,33 @@ struct kvm_vcpu *kvm_arch_vcpu_create(struct kvm *kvm, unsigned int id)
 	vcpu->arch.last_sched_cpu = -1;
 	vcpu->arch.last_exec_cpu = -1;
 
-	return vcpu;
+	/* Initial guest state */
+	err = kvm_mips_callbacks->vcpu_setup(vcpu);
+	if (err)
+		goto out_free_commpage;
+
+	return 0;
 
+out_free_commpage:
+	kfree(vcpu->arch.kseg0_commpage);
 out_free_gebase:
 	kfree(gebase);
-
-out_uninit_cpu:
-	kvm_vcpu_uninit(vcpu);
-
-out_free_cpu:
-	kfree(vcpu);
-
-out:
-	return ERR_PTR(err);
+out_uninit_vcpu:
+	kvm_mips_callbacks->vcpu_uninit(vcpu);
+	return err;
 }
 
-void kvm_arch_vcpu_free(struct kvm_vcpu *vcpu)
+void kvm_arch_vcpu_destroy(struct kvm_vcpu *vcpu)
 {
 	hrtimer_cancel(&vcpu->arch.comparecount_timer);
 
-	kvm_vcpu_uninit(vcpu);
-
 	kvm_mips_dump_stats(vcpu);
 
 	kvm_mmu_free_memory_caches(vcpu);
 	kfree(vcpu->arch.guest_ebase);
 	kfree(vcpu->arch.kseg0_commpage);
-	kfree(vcpu);
-}
 
-void kvm_arch_vcpu_destroy(struct kvm_vcpu *vcpu)
-{
-	kvm_arch_vcpu_free(vcpu);
+	kvm_mips_callbacks->vcpu_uninit(vcpu);
 }
 
 int kvm_arch_vcpu_ioctl_set_guest_debug(struct kvm_vcpu *vcpu,
@@ -1212,58 +1225,12 @@ int kvm_arch_vcpu_ioctl_get_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs)
 	return 0;
 }
 
-static void kvm_mips_comparecount_func(unsigned long data)
-{
-	struct kvm_vcpu *vcpu = (struct kvm_vcpu *)data;
-
-	kvm_mips_callbacks->queue_timer_int(vcpu);
-
-	vcpu->arch.wait = 0;
-	if (swq_has_sleeper(&vcpu->wq))
-		swake_up_one(&vcpu->wq);
-}
-
-/* low level hrtimer wake routine */
-static enum hrtimer_restart kvm_mips_comparecount_wakeup(struct hrtimer *timer)
-{
-	struct kvm_vcpu *vcpu;
-
-	vcpu = container_of(timer, struct kvm_vcpu, arch.comparecount_timer);
-	kvm_mips_comparecount_func((unsigned long) vcpu);
-	return kvm_mips_count_timeout(vcpu);
-}
-
-int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu)
-{
-	int err;
-
-	err = kvm_mips_callbacks->vcpu_init(vcpu);
-	if (err)
-		return err;
-
-	hrtimer_init(&vcpu->arch.comparecount_timer, CLOCK_MONOTONIC,
-		     HRTIMER_MODE_REL);
-	vcpu->arch.comparecount_timer.function = kvm_mips_comparecount_wakeup;
-	return 0;
-}
-
-void kvm_arch_vcpu_uninit(struct kvm_vcpu *vcpu)
-{
-	kvm_mips_callbacks->vcpu_uninit(vcpu);
-}
-
 int kvm_arch_vcpu_ioctl_translate(struct kvm_vcpu *vcpu,
 				  struct kvm_translation *tr)
 {
 	return 0;
 }
 
-/* Initial guest state */
-int kvm_arch_vcpu_setup(struct kvm_vcpu *vcpu)
-{
-	return kvm_mips_callbacks->vcpu_setup(vcpu);
-}
-
 static void kvm_mips_set_c0_status(void)
 {
 	u32 status = read_c0_status();
diff --git a/arch/mips/lasat/picvue_proc.c b/arch/mips/lasat/picvue_proc.c
index 8126f15b8e09..61c033494af5 100644
--- a/arch/mips/lasat/picvue_proc.c
+++ b/arch/mips/lasat/picvue_proc.c
@@ -89,13 +89,12 @@ static ssize_t pvc_line_proc_write(struct file *file, const char __user *buf,
 	return count;
 }
 
-static const struct file_operations pvc_line_proc_fops = {
-	.owner		= THIS_MODULE,
-	.open		= pvc_line_proc_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-	.write		= pvc_line_proc_write,
+static const struct proc_ops pvc_line_proc_ops = {
+	.proc_open	= pvc_line_proc_open,
+	.proc_read	= seq_read,
+	.proc_lseek	= seq_lseek,
+	.proc_release	= single_release,
+	.proc_write	= pvc_line_proc_write,
 };
 
 static ssize_t pvc_scroll_proc_write(struct file *file, const char __user *buf,
@@ -148,13 +147,12 @@ static int pvc_scroll_proc_open(struct inode *inode, struct file *file)
 	return single_open(file, pvc_scroll_proc_show, NULL);
 }
 
-static const struct file_operations pvc_scroll_proc_fops = {
-	.owner		= THIS_MODULE,
-	.open		= pvc_scroll_proc_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-	.write		= pvc_scroll_proc_write,
+static const struct proc_ops pvc_scroll_proc_ops = {
+	.proc_open	= pvc_scroll_proc_open,
+	.proc_read	= seq_read,
+	.proc_lseek	= seq_lseek,
+	.proc_release	= single_release,
+	.proc_write	= pvc_scroll_proc_write,
 };
 
 void pvc_proc_timerfunc(struct timer_list *unused)
@@ -189,12 +187,11 @@ static int __init pvc_proc_init(void)
 	}
 	for (i = 0; i < PVC_NLINES; i++) {
 		proc_entry = proc_create_data(pvc_linename[i], 0644, dir,
-					&pvc_line_proc_fops, &pvc_linedata[i]);
+					&pvc_line_proc_ops, &pvc_linedata[i]);
 		if (proc_entry == NULL)
 			goto error;
 	}
-	proc_entry = proc_create("scroll", 0644, dir,
-				 &pvc_scroll_proc_fops);
+	proc_entry = proc_create("scroll", 0644, dir, &pvc_scroll_proc_ops);
 	if (proc_entry == NULL)
 		goto error;
 
diff --git a/arch/mips/lib/memcpy.S b/arch/mips/lib/memcpy.S
index cdd19d8561e8..f7994d936505 100644
--- a/arch/mips/lib/memcpy.S
+++ b/arch/mips/lib/memcpy.S
@@ -301,14 +301,14 @@
 	 and	t0, src, ADDRMASK
 	PREFS(	0, 2*32(src) )
 	PREFD(	1, 2*32(dst) )
-#ifdef CONFIG_CPU_HAS_LOAD_STORE_LR
+#ifndef CONFIG_CPU_NO_LOAD_STORE_LR
 	bnez	t1, .Ldst_unaligned\@
 	 nop
 	bnez	t0, .Lsrc_unaligned_dst_aligned\@
-#else
+#else /* CONFIG_CPU_NO_LOAD_STORE_LR */
 	or	t0, t0, t1
 	bnez	t0, .Lcopy_unaligned_bytes\@
-#endif
+#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
 	/*
 	 * use delay slot for fall-through
 	 * src and dst are aligned; need to compute rem
@@ -389,7 +389,7 @@
 	bne	rem, len, 1b
 	.set	noreorder
 
-#ifdef CONFIG_CPU_HAS_LOAD_STORE_LR
+#ifndef CONFIG_CPU_NO_LOAD_STORE_LR
 	/*
 	 * src and dst are aligned, need to copy rem bytes (rem < NBYTES)
 	 * A loop would do only a byte at a time with possible branch
@@ -491,7 +491,7 @@
 	bne	len, rem, 1b
 	.set	noreorder
 
-#endif /* CONFIG_CPU_HAS_LOAD_STORE_LR */
+#endif /* !CONFIG_CPU_NO_LOAD_STORE_LR */
 .Lcopy_bytes_checklen\@:
 	beqz	len, .Ldone\@
 	 nop
@@ -520,7 +520,7 @@
 	jr	ra
 	 nop
 
-#ifndef CONFIG_CPU_HAS_LOAD_STORE_LR
+#ifdef CONFIG_CPU_NO_LOAD_STORE_LR
 .Lcopy_unaligned_bytes\@:
 1:
 	COPY_BYTE(0)
@@ -534,7 +534,7 @@
 	ADD	src, src, 8
 	b	1b
 	 ADD	dst, dst, 8
-#endif /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
+#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
 	.if __memcpy == 1
 	END(memcpy)
 	.set __memcpy, 0
diff --git a/arch/mips/lib/memset.S b/arch/mips/lib/memset.S
index 418611ef13cf..d5449e8a3dfc 100644
--- a/arch/mips/lib/memset.S
+++ b/arch/mips/lib/memset.S
@@ -115,7 +115,7 @@
 #endif
 	.set		reorder
 
-#ifdef CONFIG_CPU_HAS_LOAD_STORE_LR
+#ifndef CONFIG_CPU_NO_LOAD_STORE_LR
 	R10KCBARRIER(0(ra))
 #ifdef __MIPSEB__
 	EX(LONG_S_L, a1, (a0), .Lfirst_fixup\@)	/* make word/dword aligned */
@@ -125,7 +125,7 @@
 	PTR_SUBU	a0, t0			/* long align ptr */
 	PTR_ADDU	a2, t0			/* correct size */
 
-#else /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
+#else /* CONFIG_CPU_NO_LOAD_STORE_LR */
 #define STORE_BYTE(N)				\
 	EX(sb, a1, N(a0), .Lbyte_fixup\@);	\
 	.set		noreorder;		\
@@ -150,7 +150,7 @@
 	ori		a0, STORMASK
 	xori		a0, STORMASK
 	PTR_ADDIU	a0, STORSIZE
-#endif /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
+#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
 1:	ori		t1, a2, 0x3f		/* # of full blocks */
 	xori		t1, 0x3f
 	andi		t0, a2, 0x40-STORSIZE
@@ -185,7 +185,7 @@
 
 	.set		noreorder
 	beqz		a2, 1f
-#ifdef CONFIG_CPU_HAS_LOAD_STORE_LR
+#ifndef CONFIG_CPU_NO_LOAD_STORE_LR
 	 PTR_ADDU	a0, a2			/* What's left */
 	.set		reorder
 	R10KCBARRIER(0(ra))
@@ -194,7 +194,7 @@
 #else
 	EX(LONG_S_L, a1, -1(a0), .Llast_fixup\@)
 #endif
-#else
+#else /* CONFIG_CPU_NO_LOAD_STORE_LR */
 	 PTR_SUBU	t0, $0, a2
 	.set		reorder
 	move		a2, zero		/* No remaining longs */
@@ -211,7 +211,7 @@
 	EX(sb, a1, 6(a0), .Lbyte_fixup\@)
 #endif
 0:
-#endif
+#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
 1:	move		a2, zero
 	jr		ra
 
@@ -234,7 +234,7 @@
 	.hidden __memset
 	.endif
 
-#ifndef CONFIG_CPU_HAS_LOAD_STORE_LR
+#ifdef CONFIG_CPU_NO_LOAD_STORE_LR
 .Lbyte_fixup\@:
 	/*
 	 * unset_bytes = (#bytes - (#unaligned bytes)) - (-#unaligned bytes remaining + 1) + 1
@@ -243,7 +243,7 @@
 	PTR_SUBU	a2, t0
 	PTR_ADDIU	a2, 1
 	jr		ra
-#endif /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
+#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
 
 .Lfirst_fixup\@:
 	/* unset_bytes already in a2 */
diff --git a/arch/mips/lib/mips-atomic.c b/arch/mips/lib/mips-atomic.c
index 5530070e0d05..de03838b343b 100644
--- a/arch/mips/lib/mips-atomic.c
+++ b/arch/mips/lib/mips-atomic.c
@@ -15,7 +15,7 @@
 #include <linux/export.h>
 #include <linux/stringify.h>
 
-#if !defined(CONFIG_CPU_MIPSR2) && !defined(CONFIG_CPU_MIPSR6)
+#if !defined(CONFIG_CPU_HAS_DIEI)
 
 /*
  * For cli() we have to insert nops to make sure that the new value
@@ -110,4 +110,4 @@ notrace void arch_local_irq_restore(unsigned long flags)
 }
 EXPORT_SYMBOL(arch_local_irq_restore);
 
-#endif /* !CONFIG_CPU_MIPSR2 && !CONFIG_CPU_MIPSR6 */
+#endif /* !CONFIG_CPU_HAS_DIEI */
diff --git a/arch/mips/loongson2ef/common/pm.c b/arch/mips/loongson2ef/common/pm.c
index 11f4cfd581fb..bcb7ae9777cf 100644
--- a/arch/mips/loongson2ef/common/pm.c
+++ b/arch/mips/loongson2ef/common/pm.c
@@ -91,7 +91,7 @@ static inline void stop_perf_counters(void)
 
 static void loongson_suspend_enter(void)
 {
-	static unsigned int cached_cpu_freq;
+	unsigned int cached_cpu_freq;
 
 	/* setup wakeup events via enabling the IRQs */
 	setup_wakeup_events();
diff --git a/arch/mips/loongson64/numa.c b/arch/mips/loongson64/numa.c
index ef94a2278561..e5b40c5e3296 100644
--- a/arch/mips/loongson64/numa.c
+++ b/arch/mips/loongson64/numa.c
@@ -75,7 +75,7 @@ static int __init compute_node_distance(int row, int col)
 				loongson_sysconf.cores_per_package;
 
 	if (col == row)
-		return 0;
+		return LOCAL_DISTANCE;
 	else if (package_row == package_col)
 		return 40;
 	else
diff --git a/arch/mips/loongson64/platform.c b/arch/mips/loongson64/platform.c
index 13f3404f0030..9674ae1361a8 100644
--- a/arch/mips/loongson64/platform.c
+++ b/arch/mips/loongson64/platform.c
@@ -27,6 +27,9 @@ static int __init loongson3_platform_init(void)
 			continue;
 
 		pdev = kzalloc(sizeof(struct platform_device), GFP_KERNEL);
+		if (!pdev)
+			return -ENOMEM;
+
 		pdev->name = loongson_sysconf.sensors[i].name;
 		pdev->id = loongson_sysconf.sensors[i].id;
 		pdev->dev.platform_data = &loongson_sysconf.sensors[i];
diff --git a/arch/mips/math-emu/cp1emu.c b/arch/mips/math-emu/cp1emu.c
index 710e1f804a54..9701c89e7e14 100644
--- a/arch/mips/math-emu/cp1emu.c
+++ b/arch/mips/math-emu/cp1emu.c
@@ -1514,16 +1514,28 @@ static int fpux_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
 			break;
 
 		case madd_s_op:
-			handler = fpemu_sp_madd;
+			if (cpu_has_mac2008_only)
+				handler = ieee754sp_madd;
+			else
+				handler = fpemu_sp_madd;
 			goto scoptop;
 		case msub_s_op:
-			handler = fpemu_sp_msub;
+			if (cpu_has_mac2008_only)
+				handler = ieee754sp_msub;
+			else
+				handler = fpemu_sp_msub;
 			goto scoptop;
 		case nmadd_s_op:
-			handler = fpemu_sp_nmadd;
+			if (cpu_has_mac2008_only)
+				handler = ieee754sp_nmadd;
+			else
+				handler = fpemu_sp_nmadd;
 			goto scoptop;
 		case nmsub_s_op:
-			handler = fpemu_sp_nmsub;
+			if (cpu_has_mac2008_only)
+				handler = ieee754sp_nmsub;
+			else
+				handler = fpemu_sp_nmsub;
 			goto scoptop;
 
 		      scoptop:
@@ -1610,15 +1622,27 @@ static int fpux_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
 			break;
 
 		case madd_d_op:
-			handler = fpemu_dp_madd;
+			if (cpu_has_mac2008_only)
+				handler = ieee754dp_madd;
+			else
+				handler = fpemu_dp_madd;
 			goto dcoptop;
 		case msub_d_op:
-			handler = fpemu_dp_msub;
+			if (cpu_has_mac2008_only)
+				handler = ieee754dp_msub;
+			else
+				handler = fpemu_dp_msub;
 			goto dcoptop;
 		case nmadd_d_op:
-			handler = fpemu_dp_nmadd;
+			if (cpu_has_mac2008_only)
+				handler = ieee754dp_nmadd;
+			else
+				handler = fpemu_dp_nmadd;
 			goto dcoptop;
 		case nmsub_d_op:
+			if (cpu_has_mac2008_only)
+				handler = ieee754dp_nmsub;
+			else
 			handler = fpemu_dp_nmsub;
 			goto dcoptop;
 
diff --git a/arch/mips/math-emu/dp_maddf.c b/arch/mips/math-emu/dp_maddf.c
index 3da0ce44cdef..e24ef374d828 100644
--- a/arch/mips/math-emu/dp_maddf.c
+++ b/arch/mips/math-emu/dp_maddf.c
@@ -68,6 +68,12 @@ static union ieee754dp _dp_maddf(union ieee754dp z, union ieee754dp x,
 
 	ieee754_clearcx();
 
+	rs = xs ^ ys;
+	if (flags & MADDF_NEGATE_PRODUCT)
+		rs ^= 1;
+	if (flags & MADDF_NEGATE_ADDITION)
+		zs ^= 1;
+
 	/*
 	 * Handle the cases when at least one of x, y or z is a NaN.
 	 * Order of precedence is sNaN, qNaN and z, x, y.
@@ -104,9 +110,7 @@ static union ieee754dp _dp_maddf(union ieee754dp z, union ieee754dp x,
 	case CLPAIR(IEEE754_CLASS_INF, IEEE754_CLASS_NORM):
 	case CLPAIR(IEEE754_CLASS_INF, IEEE754_CLASS_DNORM):
 	case CLPAIR(IEEE754_CLASS_INF, IEEE754_CLASS_INF):
-		if ((zc == IEEE754_CLASS_INF) &&
-		    ((!(flags & MADDF_NEGATE_PRODUCT) && (zs != (xs ^ ys))) ||
-		     ((flags & MADDF_NEGATE_PRODUCT) && (zs == (xs ^ ys))))) {
+		if ((zc == IEEE754_CLASS_INF) && (zs != rs)) {
 			/*
 			 * Cases of addition of infinities with opposite signs
 			 * or subtraction of infinities with same signs.
@@ -116,15 +120,10 @@ static union ieee754dp _dp_maddf(union ieee754dp z, union ieee754dp x,
 		}
 		/*
 		 * z is here either not an infinity, or an infinity having the
-		 * same sign as product (x*y) (in case of MADDF.D instruction)
-		 * or product -(x*y) (in MSUBF.D case). The result must be an
-		 * infinity, and its sign is determined only by the value of
-		 * (flags & MADDF_NEGATE_PRODUCT) and the signs of x and y.
+		 * same sign as product (x*y). The result must be an infinity,
+		 * and its sign is determined only by the sign of product (x*y).
 		 */
-		if (flags & MADDF_NEGATE_PRODUCT)
-			return ieee754dp_inf(1 ^ (xs ^ ys));
-		else
-			return ieee754dp_inf(xs ^ ys);
+		return ieee754dp_inf(rs);
 
 	case CLPAIR(IEEE754_CLASS_ZERO, IEEE754_CLASS_ZERO):
 	case CLPAIR(IEEE754_CLASS_ZERO, IEEE754_CLASS_NORM):
@@ -135,10 +134,7 @@ static union ieee754dp _dp_maddf(union ieee754dp z, union ieee754dp x,
 			return ieee754dp_inf(zs);
 		if (zc == IEEE754_CLASS_ZERO) {
 			/* Handle cases +0 + (-0) and similar ones. */
-			if ((!(flags & MADDF_NEGATE_PRODUCT)
-					&& (zs == (xs ^ ys))) ||
-			    ((flags & MADDF_NEGATE_PRODUCT)
-					&& (zs != (xs ^ ys))))
+			if (zs == rs)
 				/*
 				 * Cases of addition of zeros of equal signs
 				 * or subtraction of zeroes of opposite signs.
@@ -187,9 +183,6 @@ static union ieee754dp _dp_maddf(union ieee754dp z, union ieee754dp x,
 	assert(ym & DP_HIDDEN_BIT);
 
 	re = xe + ye;
-	rs = xs ^ ys;
-	if (flags & MADDF_NEGATE_PRODUCT)
-		rs ^= 1;
 
 	/* shunt to top of word */
 	xm <<= 64 - (DP_FBITS + 1);
@@ -340,3 +333,27 @@ union ieee754dp ieee754dp_msubf(union ieee754dp z, union ieee754dp x,
 {
 	return _dp_maddf(z, x, y, MADDF_NEGATE_PRODUCT);
 }
+
+union ieee754dp ieee754dp_madd(union ieee754dp z, union ieee754dp x,
+				union ieee754dp y)
+{
+	return _dp_maddf(z, x, y, 0);
+}
+
+union ieee754dp ieee754dp_msub(union ieee754dp z, union ieee754dp x,
+				union ieee754dp y)
+{
+	return _dp_maddf(z, x, y, MADDF_NEGATE_ADDITION);
+}
+
+union ieee754dp ieee754dp_nmadd(union ieee754dp z, union ieee754dp x,
+				union ieee754dp y)
+{
+	return _dp_maddf(z, x, y, MADDF_NEGATE_PRODUCT|MADDF_NEGATE_ADDITION);
+}
+
+union ieee754dp ieee754dp_nmsub(union ieee754dp z, union ieee754dp x,
+				union ieee754dp y)
+{
+	return _dp_maddf(z, x, y, MADDF_NEGATE_PRODUCT);
+}
diff --git a/arch/mips/math-emu/ieee754.h b/arch/mips/math-emu/ieee754.h
index b9167bd4eb60..090caa740b1e 100644
--- a/arch/mips/math-emu/ieee754.h
+++ b/arch/mips/math-emu/ieee754.h
@@ -68,6 +68,14 @@ union ieee754sp ieee754sp_maddf(union ieee754sp z, union ieee754sp x,
 				union ieee754sp y);
 union ieee754sp ieee754sp_msubf(union ieee754sp z, union ieee754sp x,
 				union ieee754sp y);
+union ieee754sp ieee754sp_madd(union ieee754sp z, union ieee754sp x,
+				union ieee754sp y);
+union ieee754sp ieee754sp_msub(union ieee754sp z, union ieee754sp x,
+				union ieee754sp y);
+union ieee754sp ieee754sp_nmadd(union ieee754sp z, union ieee754sp x,
+				union ieee754sp y);
+union ieee754sp ieee754sp_nmsub(union ieee754sp z, union ieee754sp x,
+				union ieee754sp y);
 int ieee754sp_2008class(union ieee754sp x);
 union ieee754sp ieee754sp_fmin(union ieee754sp x, union ieee754sp y);
 union ieee754sp ieee754sp_fmina(union ieee754sp x, union ieee754sp y);
@@ -103,6 +111,14 @@ union ieee754dp ieee754dp_maddf(union ieee754dp z, union ieee754dp x,
 				union ieee754dp y);
 union ieee754dp ieee754dp_msubf(union ieee754dp z, union ieee754dp x,
 				union ieee754dp y);
+union ieee754dp ieee754dp_madd(union ieee754dp z, union ieee754dp x,
+				union ieee754dp y);
+union ieee754dp ieee754dp_msub(union ieee754dp z, union ieee754dp x,
+				union ieee754dp y);
+union ieee754dp ieee754dp_nmadd(union ieee754dp z, union ieee754dp x,
+				union ieee754dp y);
+union ieee754dp ieee754dp_nmsub(union ieee754dp z, union ieee754dp x,
+				union ieee754dp y);
 int ieee754dp_2008class(union ieee754dp x);
 union ieee754dp ieee754dp_fmin(union ieee754dp x, union ieee754dp y);
 union ieee754dp ieee754dp_fmina(union ieee754dp x, union ieee754dp y);
diff --git a/arch/mips/math-emu/ieee754int.h b/arch/mips/math-emu/ieee754int.h
index 52b20119e315..2c3b13546ac8 100644
--- a/arch/mips/math-emu/ieee754int.h
+++ b/arch/mips/math-emu/ieee754int.h
@@ -16,6 +16,7 @@
 
 enum maddf_flags {
 	MADDF_NEGATE_PRODUCT	= 1 << 0,
+	MADDF_NEGATE_ADDITION	= 1 << 1,
 };
 
 static inline void ieee754_clearcx(void)
diff --git a/arch/mips/math-emu/sp_maddf.c b/arch/mips/math-emu/sp_maddf.c
index d638354add6d..1b85b1a527ac 100644
--- a/arch/mips/math-emu/sp_maddf.c
+++ b/arch/mips/math-emu/sp_maddf.c
@@ -36,6 +36,12 @@ static union ieee754sp _sp_maddf(union ieee754sp z, union ieee754sp x,
 
 	ieee754_clearcx();
 
+	rs = xs ^ ys;
+	if (flags & MADDF_NEGATE_PRODUCT)
+		rs ^= 1;
+	if (flags & MADDF_NEGATE_ADDITION)
+		zs ^= 1;
+
 	/*
 	 * Handle the cases when at least one of x, y or z is a NaN.
 	 * Order of precedence is sNaN, qNaN and z, x, y.
@@ -73,9 +79,7 @@ static union ieee754sp _sp_maddf(union ieee754sp z, union ieee754sp x,
 	case CLPAIR(IEEE754_CLASS_INF, IEEE754_CLASS_NORM):
 	case CLPAIR(IEEE754_CLASS_INF, IEEE754_CLASS_DNORM):
 	case CLPAIR(IEEE754_CLASS_INF, IEEE754_CLASS_INF):
-		if ((zc == IEEE754_CLASS_INF) &&
-		    ((!(flags & MADDF_NEGATE_PRODUCT) && (zs != (xs ^ ys))) ||
-		     ((flags & MADDF_NEGATE_PRODUCT) && (zs == (xs ^ ys))))) {
+		if ((zc == IEEE754_CLASS_INF) && (zs != rs)) {
 			/*
 			 * Cases of addition of infinities with opposite signs
 			 * or subtraction of infinities with same signs.
@@ -85,15 +89,10 @@ static union ieee754sp _sp_maddf(union ieee754sp z, union ieee754sp x,
 		}
 		/*
 		 * z is here either not an infinity, or an infinity having the
-		 * same sign as product (x*y) (in case of MADDF.D instruction)
-		 * or product -(x*y) (in MSUBF.D case). The result must be an
-		 * infinity, and its sign is determined only by the value of
-		 * (flags & MADDF_NEGATE_PRODUCT) and the signs of x and y.
+		 * same sign as product (x*y). The result must be an infinity,
+		 * and its sign is determined only by the sign of product (x*y).
 		 */
-		if (flags & MADDF_NEGATE_PRODUCT)
-			return ieee754sp_inf(1 ^ (xs ^ ys));
-		else
-			return ieee754sp_inf(xs ^ ys);
+		return ieee754sp_inf(rs);
 
 	case CLPAIR(IEEE754_CLASS_ZERO, IEEE754_CLASS_ZERO):
 	case CLPAIR(IEEE754_CLASS_ZERO, IEEE754_CLASS_NORM):
@@ -104,10 +103,7 @@ static union ieee754sp _sp_maddf(union ieee754sp z, union ieee754sp x,
 			return ieee754sp_inf(zs);
 		if (zc == IEEE754_CLASS_ZERO) {
 			/* Handle cases +0 + (-0) and similar ones. */
-			if ((!(flags & MADDF_NEGATE_PRODUCT)
-					&& (zs == (xs ^ ys))) ||
-			    ((flags & MADDF_NEGATE_PRODUCT)
-					&& (zs != (xs ^ ys))))
+			if (zs == rs)
 				/*
 				 * Cases of addition of zeros of equal signs
 				 * or subtraction of zeroes of opposite signs.
@@ -158,9 +154,6 @@ static union ieee754sp _sp_maddf(union ieee754sp z, union ieee754sp x,
 	assert(ym & SP_HIDDEN_BIT);
 
 	re = xe + ye;
-	rs = xs ^ ys;
-	if (flags & MADDF_NEGATE_PRODUCT)
-		rs ^= 1;
 
 	/* Multiple 24 bit xm and ym to give 48 bit results */
 	rm64 = (uint64_t)xm * ym;
@@ -260,3 +253,27 @@ union ieee754sp ieee754sp_msubf(union ieee754sp z, union ieee754sp x,
 {
 	return _sp_maddf(z, x, y, MADDF_NEGATE_PRODUCT);
 }
+
+union ieee754sp ieee754sp_madd(union ieee754sp z, union ieee754sp x,
+				union ieee754sp y)
+{
+	return _sp_maddf(z, x, y, 0);
+}
+
+union ieee754sp ieee754sp_msub(union ieee754sp z, union ieee754sp x,
+				union ieee754sp y)
+{
+	return _sp_maddf(z, x, y, MADDF_NEGATE_ADDITION);
+}
+
+union ieee754sp ieee754sp_nmadd(union ieee754sp z, union ieee754sp x,
+				union ieee754sp y)
+{
+	return _sp_maddf(z, x, y, MADDF_NEGATE_PRODUCT|MADDF_NEGATE_ADDITION);
+}
+
+union ieee754sp ieee754sp_nmsub(union ieee754sp z, union ieee754sp x,
+				union ieee754sp y)
+{
+	return _sp_maddf(z, x, y, MADDF_NEGATE_PRODUCT);
+}
diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c
index 50f9ed8c6c1b..79684000de0e 100644
--- a/arch/mips/mm/init.c
+++ b/arch/mips/mm/init.c
@@ -508,6 +508,51 @@ void __ref free_initmem(void)
 		free_initmem_default(POISON_FREE_INITMEM);
 }
 
+#ifdef CONFIG_HAVE_SETUP_PER_CPU_AREA
+unsigned long __per_cpu_offset[NR_CPUS] __read_mostly;
+EXPORT_SYMBOL(__per_cpu_offset);
+
+static int __init pcpu_cpu_distance(unsigned int from, unsigned int to)
+{
+	return node_distance(cpu_to_node(from), cpu_to_node(to));
+}
+
+static void * __init pcpu_fc_alloc(unsigned int cpu, size_t size,
+				       size_t align)
+{
+	return memblock_alloc_try_nid(size, align, __pa(MAX_DMA_ADDRESS),
+				      MEMBLOCK_ALLOC_ACCESSIBLE,
+				      cpu_to_node(cpu));
+}
+
+static void __init pcpu_fc_free(void *ptr, size_t size)
+{
+	memblock_free_early(__pa(ptr), size);
+}
+
+void __init setup_per_cpu_areas(void)
+{
+	unsigned long delta;
+	unsigned int cpu;
+	int rc;
+
+	/*
+	 * Always reserve area for module percpu variables.  That's
+	 * what the legacy allocator did.
+	 */
+	rc = pcpu_embed_first_chunk(PERCPU_MODULE_RESERVE,
+				    PERCPU_DYNAMIC_RESERVE, PAGE_SIZE,
+				    pcpu_cpu_distance,
+				    pcpu_fc_alloc, pcpu_fc_free);
+	if (rc < 0)
+		panic("Failed to initialize percpu areas.");
+
+	delta = (unsigned long)pcpu_base_addr - (unsigned long)__per_cpu_start;
+	for_each_possible_cpu(cpu)
+		__per_cpu_offset[cpu] = delta + pcpu_unit_offsets[cpu];
+}
+#endif
+
 #ifndef CONFIG_MIPS_PGD_C0_CONTEXT
 unsigned long pgd_current[NR_CPUS];
 #endif
diff --git a/arch/mips/net/Makefile b/arch/mips/net/Makefile
index 2d03af7d6b19..d55912349039 100644
--- a/arch/mips/net/Makefile
+++ b/arch/mips/net/Makefile
@@ -1,4 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0-only
 # MIPS networking code
 
+obj-$(CONFIG_MIPS_CBPF_JIT) += bpf_jit.o bpf_jit_asm.o
 obj-$(CONFIG_MIPS_EBPF_JIT) += ebpf_jit.o
diff --git a/arch/mips/net/bpf_jit.c b/arch/mips/net/bpf_jit.c
new file mode 100644
index 000000000000..0af88622c619
--- /dev/null
+++ b/arch/mips/net/bpf_jit.c
@@ -0,0 +1,1270 @@
+/*
+ * Just-In-Time compiler for BPF filters on MIPS
+ *
+ * Copyright (c) 2014 Imagination Technologies Ltd.
+ * Author: Markos Chandras <markos.chandras@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; version 2 of the License.
+ */
+
+#include <linux/bitops.h>
+#include <linux/compiler.h>
+#include <linux/errno.h>
+#include <linux/filter.h>
+#include <linux/if_vlan.h>
+#include <linux/moduleloader.h>
+#include <linux/netdevice.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <asm/asm.h>
+#include <asm/bitops.h>
+#include <asm/cacheflush.h>
+#include <asm/cpu-features.h>
+#include <asm/uasm.h>
+
+#include "bpf_jit.h"
+
+/* ABI
+ * r_skb_hl	SKB header length
+ * r_data	SKB data pointer
+ * r_off	Offset
+ * r_A		BPF register A
+ * r_X		BPF register X
+ * r_skb	*skb
+ * r_M		*scratch memory
+ * r_skb_len	SKB length
+ *
+ * On entry (*bpf_func)(*skb, *filter)
+ * a0 = MIPS_R_A0 = skb;
+ * a1 = MIPS_R_A1 = filter;
+ *
+ * Stack
+ * ...
+ * M[15]
+ * M[14]
+ * M[13]
+ * ...
+ * M[0] <-- r_M
+ * saved reg k-1
+ * saved reg k-2
+ * ...
+ * saved reg 0 <-- r_sp
+ * <no argument area>
+ *
+ *                     Packet layout
+ *
+ * <--------------------- len ------------------------>
+ * <--skb-len(r_skb_hl)-->< ----- skb->data_len ------>
+ * ----------------------------------------------------
+ * |                  skb->data                       |
+ * ----------------------------------------------------
+ */
+
+#define ptr typeof(unsigned long)
+
+#define SCRATCH_OFF(k)		(4 * (k))
+
+/* JIT flags */
+#define SEEN_CALL		(1 << BPF_MEMWORDS)
+#define SEEN_SREG_SFT		(BPF_MEMWORDS + 1)
+#define SEEN_SREG_BASE		(1 << SEEN_SREG_SFT)
+#define SEEN_SREG(x)		(SEEN_SREG_BASE << (x))
+#define SEEN_OFF		SEEN_SREG(2)
+#define SEEN_A			SEEN_SREG(3)
+#define SEEN_X			SEEN_SREG(4)
+#define SEEN_SKB		SEEN_SREG(5)
+#define SEEN_MEM		SEEN_SREG(6)
+/* SEEN_SK_DATA also implies skb_hl an skb_len */
+#define SEEN_SKB_DATA		(SEEN_SREG(7) | SEEN_SREG(1) | SEEN_SREG(0))
+
+/* Arguments used by JIT */
+#define ARGS_USED_BY_JIT	2 /* only applicable to 64-bit */
+
+#define SBIT(x)			(1 << (x)) /* Signed version of BIT() */
+
+/**
+ * struct jit_ctx - JIT context
+ * @skf:		The sk_filter
+ * @prologue_bytes:	Number of bytes for prologue
+ * @idx:		Instruction index
+ * @flags:		JIT flags
+ * @offsets:		Instruction offsets
+ * @target:		Memory location for the compiled filter
+ */
+struct jit_ctx {
+	const struct bpf_prog *skf;
+	unsigned int prologue_bytes;
+	u32 idx;
+	u32 flags;
+	u32 *offsets;
+	u32 *target;
+};
+
+
+static inline int optimize_div(u32 *k)
+{
+	/* power of 2 divides can be implemented with right shift */
+	if (!(*k & (*k-1))) {
+		*k = ilog2(*k);
+		return 1;
+	}
+
+	return 0;
+}
+
+static inline void emit_jit_reg_move(ptr dst, ptr src, struct jit_ctx *ctx);
+
+/* Simply emit the instruction if the JIT memory space has been allocated */
+#define emit_instr(ctx, func, ...)			\
+do {							\
+	if ((ctx)->target != NULL) {			\
+		u32 *p = &(ctx)->target[ctx->idx];	\
+		uasm_i_##func(&p, ##__VA_ARGS__);	\
+	}						\
+	(ctx)->idx++;					\
+} while (0)
+
+/*
+ * Similar to emit_instr but it must be used when we need to emit
+ * 32-bit or 64-bit instructions
+ */
+#define emit_long_instr(ctx, func, ...)			\
+do {							\
+	if ((ctx)->target != NULL) {			\
+		u32 *p = &(ctx)->target[ctx->idx];	\
+		UASM_i_##func(&p, ##__VA_ARGS__);	\
+	}						\
+	(ctx)->idx++;					\
+} while (0)
+
+/* Determine if immediate is within the 16-bit signed range */
+static inline bool is_range16(s32 imm)
+{
+	return !(imm >= SBIT(15) || imm < -SBIT(15));
+}
+
+static inline void emit_addu(unsigned int dst, unsigned int src1,
+			     unsigned int src2, struct jit_ctx *ctx)
+{
+	emit_instr(ctx, addu, dst, src1, src2);
+}
+
+static inline void emit_nop(struct jit_ctx *ctx)
+{
+	emit_instr(ctx, nop);
+}
+
+/* Load a u32 immediate to a register */
+static inline void emit_load_imm(unsigned int dst, u32 imm, struct jit_ctx *ctx)
+{
+	if (ctx->target != NULL) {
+		/* addiu can only handle s16 */
+		if (!is_range16(imm)) {
+			u32 *p = &ctx->target[ctx->idx];
+			uasm_i_lui(&p, r_tmp_imm, (s32)imm >> 16);
+			p = &ctx->target[ctx->idx + 1];
+			uasm_i_ori(&p, dst, r_tmp_imm, imm & 0xffff);
+		} else {
+			u32 *p = &ctx->target[ctx->idx];
+			uasm_i_addiu(&p, dst, r_zero, imm);
+		}
+	}
+	ctx->idx++;
+
+	if (!is_range16(imm))
+		ctx->idx++;
+}
+
+static inline void emit_or(unsigned int dst, unsigned int src1,
+			   unsigned int src2, struct jit_ctx *ctx)
+{
+	emit_instr(ctx, or, dst, src1, src2);
+}
+
+static inline void emit_ori(unsigned int dst, unsigned src, u32 imm,
+			    struct jit_ctx *ctx)
+{
+	if (imm >= BIT(16)) {
+		emit_load_imm(r_tmp, imm, ctx);
+		emit_or(dst, src, r_tmp, ctx);
+	} else {
+		emit_instr(ctx, ori, dst, src, imm);
+	}
+}
+
+static inline void emit_daddiu(unsigned int dst, unsigned int src,
+			       int imm, struct jit_ctx *ctx)
+{
+	/*
+	 * Only used for stack, so the imm is relatively small
+	 * and it fits in 15-bits
+	 */
+	emit_instr(ctx, daddiu, dst, src, imm);
+}
+
+static inline void emit_addiu(unsigned int dst, unsigned int src,
+			      u32 imm, struct jit_ctx *ctx)
+{
+	if (!is_range16(imm)) {
+		emit_load_imm(r_tmp, imm, ctx);
+		emit_addu(dst, r_tmp, src, ctx);
+	} else {
+		emit_instr(ctx, addiu, dst, src, imm);
+	}
+}
+
+static inline void emit_and(unsigned int dst, unsigned int src1,
+			    unsigned int src2, struct jit_ctx *ctx)
+{
+	emit_instr(ctx, and, dst, src1, src2);
+}
+
+static inline void emit_andi(unsigned int dst, unsigned int src,
+			     u32 imm, struct jit_ctx *ctx)
+{
+	/* If imm does not fit in u16 then load it to register */
+	if (imm >= BIT(16)) {
+		emit_load_imm(r_tmp, imm, ctx);
+		emit_and(dst, src, r_tmp, ctx);
+	} else {
+		emit_instr(ctx, andi, dst, src, imm);
+	}
+}
+
+static inline void emit_xor(unsigned int dst, unsigned int src1,
+			    unsigned int src2, struct jit_ctx *ctx)
+{
+	emit_instr(ctx, xor, dst, src1, src2);
+}
+
+static inline void emit_xori(ptr dst, ptr src, u32 imm, struct jit_ctx *ctx)
+{
+	/* If imm does not fit in u16 then load it to register */
+	if (imm >= BIT(16)) {
+		emit_load_imm(r_tmp, imm, ctx);
+		emit_xor(dst, src, r_tmp, ctx);
+	} else {
+		emit_instr(ctx, xori, dst, src, imm);
+	}
+}
+
+static inline void emit_stack_offset(int offset, struct jit_ctx *ctx)
+{
+	emit_long_instr(ctx, ADDIU, r_sp, r_sp, offset);
+}
+
+static inline void emit_subu(unsigned int dst, unsigned int src1,
+			     unsigned int src2, struct jit_ctx *ctx)
+{
+	emit_instr(ctx, subu, dst, src1, src2);
+}
+
+static inline void emit_neg(unsigned int reg, struct jit_ctx *ctx)
+{
+	emit_subu(reg, r_zero, reg, ctx);
+}
+
+static inline void emit_sllv(unsigned int dst, unsigned int src,
+			     unsigned int sa, struct jit_ctx *ctx)
+{
+	emit_instr(ctx, sllv, dst, src, sa);
+}
+
+static inline void emit_sll(unsigned int dst, unsigned int src,
+			    unsigned int sa, struct jit_ctx *ctx)
+{
+	/* sa is 5-bits long */
+	if (sa >= BIT(5))
+		/* Shifting >= 32 results in zero */
+		emit_jit_reg_move(dst, r_zero, ctx);
+	else
+		emit_instr(ctx, sll, dst, src, sa);
+}
+
+static inline void emit_srlv(unsigned int dst, unsigned int src,
+			     unsigned int sa, struct jit_ctx *ctx)
+{
+	emit_instr(ctx, srlv, dst, src, sa);
+}
+
+static inline void emit_srl(unsigned int dst, unsigned int src,
+			    unsigned int sa, struct jit_ctx *ctx)
+{
+	/* sa is 5-bits long */
+	if (sa >= BIT(5))
+		/* Shifting >= 32 results in zero */
+		emit_jit_reg_move(dst, r_zero, ctx);
+	else
+		emit_instr(ctx, srl, dst, src, sa);
+}
+
+static inline void emit_slt(unsigned int dst, unsigned int src1,
+			    unsigned int src2, struct jit_ctx *ctx)
+{
+	emit_instr(ctx, slt, dst, src1, src2);
+}
+
+static inline void emit_sltu(unsigned int dst, unsigned int src1,
+			     unsigned int src2, struct jit_ctx *ctx)
+{
+	emit_instr(ctx, sltu, dst, src1, src2);
+}
+
+static inline void emit_sltiu(unsigned dst, unsigned int src,
+			      unsigned int imm, struct jit_ctx *ctx)
+{
+	/* 16 bit immediate */
+	if (!is_range16((s32)imm)) {
+		emit_load_imm(r_tmp, imm, ctx);
+		emit_sltu(dst, src, r_tmp, ctx);
+	} else {
+		emit_instr(ctx, sltiu, dst, src, imm);
+	}
+
+}
+
+/* Store register on the stack */
+static inline void emit_store_stack_reg(ptr reg, ptr base,
+					unsigned int offset,
+					struct jit_ctx *ctx)
+{
+	emit_long_instr(ctx, SW, reg, offset, base);
+}
+
+static inline void emit_store(ptr reg, ptr base, unsigned int offset,
+			      struct jit_ctx *ctx)
+{
+	emit_instr(ctx, sw, reg, offset, base);
+}
+
+static inline void emit_load_stack_reg(ptr reg, ptr base,
+				       unsigned int offset,
+				       struct jit_ctx *ctx)
+{
+	emit_long_instr(ctx, LW, reg, offset, base);
+}
+
+static inline void emit_load(unsigned int reg, unsigned int base,
+			     unsigned int offset, struct jit_ctx *ctx)
+{
+	emit_instr(ctx, lw, reg, offset, base);
+}
+
+static inline void emit_load_byte(unsigned int reg, unsigned int base,
+				  unsigned int offset, struct jit_ctx *ctx)
+{
+	emit_instr(ctx, lb, reg, offset, base);
+}
+
+static inline void emit_half_load(unsigned int reg, unsigned int base,
+				  unsigned int offset, struct jit_ctx *ctx)
+{
+	emit_instr(ctx, lh, reg, offset, base);
+}
+
+static inline void emit_half_load_unsigned(unsigned int reg, unsigned int base,
+					   unsigned int offset, struct jit_ctx *ctx)
+{
+	emit_instr(ctx, lhu, reg, offset, base);
+}
+
+static inline void emit_mul(unsigned int dst, unsigned int src1,
+			    unsigned int src2, struct jit_ctx *ctx)
+{
+	emit_instr(ctx, mul, dst, src1, src2);
+}
+
+static inline void emit_div(unsigned int dst, unsigned int src,
+			    struct jit_ctx *ctx)
+{
+	if (ctx->target != NULL) {
+		u32 *p = &ctx->target[ctx->idx];
+		uasm_i_divu(&p, dst, src);
+		p = &ctx->target[ctx->idx + 1];
+		uasm_i_mflo(&p, dst);
+	}
+	ctx->idx += 2; /* 2 insts */
+}
+
+static inline void emit_mod(unsigned int dst, unsigned int src,
+			    struct jit_ctx *ctx)
+{
+	if (ctx->target != NULL) {
+		u32 *p = &ctx->target[ctx->idx];
+		uasm_i_divu(&p, dst, src);
+		p = &ctx->target[ctx->idx + 1];
+		uasm_i_mfhi(&p, dst);
+	}
+	ctx->idx += 2; /* 2 insts */
+}
+
+static inline void emit_dsll(unsigned int dst, unsigned int src,
+			     unsigned int sa, struct jit_ctx *ctx)
+{
+	emit_instr(ctx, dsll, dst, src, sa);
+}
+
+static inline void emit_dsrl32(unsigned int dst, unsigned int src,
+			       unsigned int sa, struct jit_ctx *ctx)
+{
+	emit_instr(ctx, dsrl32, dst, src, sa);
+}
+
+static inline void emit_wsbh(unsigned int dst, unsigned int src,
+			     struct jit_ctx *ctx)
+{
+	emit_instr(ctx, wsbh, dst, src);
+}
+
+/* load pointer to register */
+static inline void emit_load_ptr(unsigned int dst, unsigned int src,
+				     int imm, struct jit_ctx *ctx)
+{
+	/* src contains the base addr of the 32/64-pointer */
+	emit_long_instr(ctx, LW, dst, imm, src);
+}
+
+/* load a function pointer to register */
+static inline void emit_load_func(unsigned int reg, ptr imm,
+				  struct jit_ctx *ctx)
+{
+	if (IS_ENABLED(CONFIG_64BIT)) {
+		/* At this point imm is always 64-bit */
+		emit_load_imm(r_tmp, (u64)imm >> 32, ctx);
+		emit_dsll(r_tmp_imm, r_tmp, 16, ctx); /* left shift by 16 */
+		emit_ori(r_tmp, r_tmp_imm, (imm >> 16) & 0xffff, ctx);
+		emit_dsll(r_tmp_imm, r_tmp, 16, ctx); /* left shift by 16 */
+		emit_ori(reg, r_tmp_imm, imm & 0xffff, ctx);
+	} else {
+		emit_load_imm(reg, imm, ctx);
+	}
+}
+
+/* Move to real MIPS register */
+static inline void emit_reg_move(ptr dst, ptr src, struct jit_ctx *ctx)
+{
+	emit_long_instr(ctx, ADDU, dst, src, r_zero);
+}
+
+/* Move to JIT (32-bit) register */
+static inline void emit_jit_reg_move(ptr dst, ptr src, struct jit_ctx *ctx)
+{
+	emit_addu(dst, src, r_zero, ctx);
+}
+
+/* Compute the immediate value for PC-relative branches. */
+static inline u32 b_imm(unsigned int tgt, struct jit_ctx *ctx)
+{
+	if (ctx->target == NULL)
+		return 0;
+
+	/*
+	 * We want a pc-relative branch. We only do forward branches
+	 * so tgt is always after pc. tgt is the instruction offset
+	 * we want to jump to.
+
+	 * Branch on MIPS:
+	 * I: target_offset <- sign_extend(offset)
+	 * I+1: PC += target_offset (delay slot)
+	 *
+	 * ctx->idx currently points to the branch instruction
+	 * but the offset is added to the delay slot so we need
+	 * to subtract 4.
+	 */
+	return ctx->offsets[tgt] -
+		(ctx->idx * 4 - ctx->prologue_bytes) - 4;
+}
+
+static inline void emit_bcond(int cond, unsigned int reg1, unsigned int reg2,
+			     unsigned int imm, struct jit_ctx *ctx)
+{
+	if (ctx->target != NULL) {
+		u32 *p = &ctx->target[ctx->idx];
+
+		switch (cond) {
+		case MIPS_COND_EQ:
+			uasm_i_beq(&p, reg1, reg2, imm);
+			break;
+		case MIPS_COND_NE:
+			uasm_i_bne(&p, reg1, reg2, imm);
+			break;
+		case MIPS_COND_ALL:
+			uasm_i_b(&p, imm);
+			break;
+		default:
+			pr_warn("%s: Unhandled branch conditional: %d\n",
+				__func__, cond);
+		}
+	}
+	ctx->idx++;
+}
+
+static inline void emit_b(unsigned int imm, struct jit_ctx *ctx)
+{
+	emit_bcond(MIPS_COND_ALL, r_zero, r_zero, imm, ctx);
+}
+
+static inline void emit_jalr(unsigned int link, unsigned int reg,
+			     struct jit_ctx *ctx)
+{
+	emit_instr(ctx, jalr, link, reg);
+}
+
+static inline void emit_jr(unsigned int reg, struct jit_ctx *ctx)
+{
+	emit_instr(ctx, jr, reg);
+}
+
+static inline u16 align_sp(unsigned int num)
+{
+	/* Double word alignment for 32-bit, quadword for 64-bit */
+	unsigned int align = IS_ENABLED(CONFIG_64BIT) ? 16 : 8;
+	num = (num + (align - 1)) & -align;
+	return num;
+}
+
+static void save_bpf_jit_regs(struct jit_ctx *ctx, unsigned offset)
+{
+	int i = 0, real_off = 0;
+	u32 sflags, tmp_flags;
+
+	/* Adjust the stack pointer */
+	if (offset)
+		emit_stack_offset(-align_sp(offset), ctx);
+
+	tmp_flags = sflags = ctx->flags >> SEEN_SREG_SFT;
+	/* sflags is essentially a bitmap */
+	while (tmp_flags) {
+		if ((sflags >> i) & 0x1) {
+			emit_store_stack_reg(MIPS_R_S0 + i, r_sp, real_off,
+					     ctx);
+			real_off += SZREG;
+		}
+		i++;
+		tmp_flags >>= 1;
+	}
+
+	/* save return address */
+	if (ctx->flags & SEEN_CALL) {
+		emit_store_stack_reg(r_ra, r_sp, real_off, ctx);
+		real_off += SZREG;
+	}
+
+	/* Setup r_M leaving the alignment gap if necessary */
+	if (ctx->flags & SEEN_MEM) {
+		if (real_off % (SZREG * 2))
+			real_off += SZREG;
+		emit_long_instr(ctx, ADDIU, r_M, r_sp, real_off);
+	}
+}
+
+static void restore_bpf_jit_regs(struct jit_ctx *ctx,
+				 unsigned int offset)
+{
+	int i, real_off = 0;
+	u32 sflags, tmp_flags;
+
+	tmp_flags = sflags = ctx->flags >> SEEN_SREG_SFT;
+	/* sflags is a bitmap */
+	i = 0;
+	while (tmp_flags) {
+		if ((sflags >> i) & 0x1) {
+			emit_load_stack_reg(MIPS_R_S0 + i, r_sp, real_off,
+					    ctx);
+			real_off += SZREG;
+		}
+		i++;
+		tmp_flags >>= 1;
+	}
+
+	/* restore return address */
+	if (ctx->flags & SEEN_CALL)
+		emit_load_stack_reg(r_ra, r_sp, real_off, ctx);
+
+	/* Restore the sp and discard the scrach memory */
+	if (offset)
+		emit_stack_offset(align_sp(offset), ctx);
+}
+
+static unsigned int get_stack_depth(struct jit_ctx *ctx)
+{
+	int sp_off = 0;
+
+
+	/* How may s* regs do we need to preserved? */
+	sp_off += hweight32(ctx->flags >> SEEN_SREG_SFT) * SZREG;
+
+	if (ctx->flags & SEEN_MEM)
+		sp_off += 4 * BPF_MEMWORDS; /* BPF_MEMWORDS are 32-bit */
+
+	if (ctx->flags & SEEN_CALL)
+		sp_off += SZREG; /* Space for our ra register */
+
+	return sp_off;
+}
+
+static void build_prologue(struct jit_ctx *ctx)
+{
+	int sp_off;
+
+	/* Calculate the total offset for the stack pointer */
+	sp_off = get_stack_depth(ctx);
+	save_bpf_jit_regs(ctx, sp_off);
+
+	if (ctx->flags & SEEN_SKB)
+		emit_reg_move(r_skb, MIPS_R_A0, ctx);
+
+	if (ctx->flags & SEEN_SKB_DATA) {
+		/* Load packet length */
+		emit_load(r_skb_len, r_skb, offsetof(struct sk_buff, len),
+			  ctx);
+		emit_load(r_tmp, r_skb, offsetof(struct sk_buff, data_len),
+			  ctx);
+		/* Load the data pointer */
+		emit_load_ptr(r_skb_data, r_skb,
+			      offsetof(struct sk_buff, data), ctx);
+		/* Load the header length */
+		emit_subu(r_skb_hl, r_skb_len, r_tmp, ctx);
+	}
+
+	if (ctx->flags & SEEN_X)
+		emit_jit_reg_move(r_X, r_zero, ctx);
+
+	/*
+	 * Do not leak kernel data to userspace, we only need to clear
+	 * r_A if it is ever used.  In fact if it is never used, we
+	 * will not save/restore it, so clearing it in this case would
+	 * corrupt the state of the caller.
+	 */
+	if (bpf_needs_clear_a(&ctx->skf->insns[0]) &&
+	    (ctx->flags & SEEN_A))
+		emit_jit_reg_move(r_A, r_zero, ctx);
+}
+
+static void build_epilogue(struct jit_ctx *ctx)
+{
+	unsigned int sp_off;
+
+	/* Calculate the total offset for the stack pointer */
+
+	sp_off = get_stack_depth(ctx);
+	restore_bpf_jit_regs(ctx, sp_off);
+
+	/* Return */
+	emit_jr(r_ra, ctx);
+	emit_nop(ctx);
+}
+
+#define CHOOSE_LOAD_FUNC(K, func) \
+	((int)K < 0 ? ((int)K >= SKF_LL_OFF ? func##_negative : func) : \
+	 func##_positive)
+
+static int build_body(struct jit_ctx *ctx)
+{
+	const struct bpf_prog *prog = ctx->skf;
+	const struct sock_filter *inst;
+	unsigned int i, off, condt;
+	u32 k, b_off __maybe_unused;
+	u8 (*sk_load_func)(unsigned long *skb, int offset);
+
+	for (i = 0; i < prog->len; i++) {
+		u16 code;
+
+		inst = &(prog->insns[i]);
+		pr_debug("%s: code->0x%02x, jt->0x%x, jf->0x%x, k->0x%x\n",
+			 __func__, inst->code, inst->jt, inst->jf, inst->k);
+		k = inst->k;
+		code = bpf_anc_helper(inst);
+
+		if (ctx->target == NULL)
+			ctx->offsets[i] = ctx->idx * 4;
+
+		switch (code) {
+		case BPF_LD | BPF_IMM:
+			/* A <- k ==> li r_A, k */
+			ctx->flags |= SEEN_A;
+			emit_load_imm(r_A, k, ctx);
+			break;
+		case BPF_LD | BPF_W | BPF_LEN:
+			BUILD_BUG_ON(sizeof_field(struct sk_buff, len) != 4);
+			/* A <- len ==> lw r_A, offset(skb) */
+			ctx->flags |= SEEN_SKB | SEEN_A;
+			off = offsetof(struct sk_buff, len);
+			emit_load(r_A, r_skb, off, ctx);
+			break;
+		case BPF_LD | BPF_MEM:
+			/* A <- M[k] ==> lw r_A, offset(M) */
+			ctx->flags |= SEEN_MEM | SEEN_A;
+			emit_load(r_A, r_M, SCRATCH_OFF(k), ctx);
+			break;
+		case BPF_LD | BPF_W | BPF_ABS:
+			/* A <- P[k:4] */
+			sk_load_func = CHOOSE_LOAD_FUNC(k, sk_load_word);
+			goto load;
+		case BPF_LD | BPF_H | BPF_ABS:
+			/* A <- P[k:2] */
+			sk_load_func = CHOOSE_LOAD_FUNC(k, sk_load_half);
+			goto load;
+		case BPF_LD | BPF_B | BPF_ABS:
+			/* A <- P[k:1] */
+			sk_load_func = CHOOSE_LOAD_FUNC(k, sk_load_byte);
+load:
+			emit_load_imm(r_off, k, ctx);
+load_common:
+			ctx->flags |= SEEN_CALL | SEEN_OFF |
+				SEEN_SKB | SEEN_A | SEEN_SKB_DATA;
+
+			emit_load_func(r_s0, (ptr)sk_load_func, ctx);
+			emit_reg_move(MIPS_R_A0, r_skb, ctx);
+			emit_jalr(MIPS_R_RA, r_s0, ctx);
+			/* Load second argument to delay slot */
+			emit_reg_move(MIPS_R_A1, r_off, ctx);
+			/* Check the error value */
+			emit_bcond(MIPS_COND_EQ, r_ret, 0, b_imm(i + 1, ctx),
+				   ctx);
+			/* Load return register on DS for failures */
+			emit_reg_move(r_ret, r_zero, ctx);
+			/* Return with error */
+			emit_b(b_imm(prog->len, ctx), ctx);
+			emit_nop(ctx);
+			break;
+		case BPF_LD | BPF_W | BPF_IND:
+			/* A <- P[X + k:4] */
+			sk_load_func = sk_load_word;
+			goto load_ind;
+		case BPF_LD | BPF_H | BPF_IND:
+			/* A <- P[X + k:2] */
+			sk_load_func = sk_load_half;
+			goto load_ind;
+		case BPF_LD | BPF_B | BPF_IND:
+			/* A <- P[X + k:1] */
+			sk_load_func = sk_load_byte;
+load_ind:
+			ctx->flags |= SEEN_OFF | SEEN_X;
+			emit_addiu(r_off, r_X, k, ctx);
+			goto load_common;
+		case BPF_LDX | BPF_IMM:
+			/* X <- k */
+			ctx->flags |= SEEN_X;
+			emit_load_imm(r_X, k, ctx);
+			break;
+		case BPF_LDX | BPF_MEM:
+			/* X <- M[k] */
+			ctx->flags |= SEEN_X | SEEN_MEM;
+			emit_load(r_X, r_M, SCRATCH_OFF(k), ctx);
+			break;
+		case BPF_LDX | BPF_W | BPF_LEN:
+			/* X <- len */
+			ctx->flags |= SEEN_X | SEEN_SKB;
+			off = offsetof(struct sk_buff, len);
+			emit_load(r_X, r_skb, off, ctx);
+			break;
+		case BPF_LDX | BPF_B | BPF_MSH:
+			/* X <- 4 * (P[k:1] & 0xf) */
+			ctx->flags |= SEEN_X | SEEN_CALL | SEEN_SKB;
+			/* Load offset to a1 */
+			emit_load_func(r_s0, (ptr)sk_load_byte, ctx);
+			/*
+			 * This may emit two instructions so it may not fit
+			 * in the delay slot. So use a0 in the delay slot.
+			 */
+			emit_load_imm(MIPS_R_A1, k, ctx);
+			emit_jalr(MIPS_R_RA, r_s0, ctx);
+			emit_reg_move(MIPS_R_A0, r_skb, ctx); /* delay slot */
+			/* Check the error value */
+			emit_bcond(MIPS_COND_NE, r_ret, 0,
+				   b_imm(prog->len, ctx), ctx);
+			emit_reg_move(r_ret, r_zero, ctx);
+			/* We are good */
+			/* X <- P[1:K] & 0xf */
+			emit_andi(r_X, r_A, 0xf, ctx);
+			/* X << 2 */
+			emit_b(b_imm(i + 1, ctx), ctx);
+			emit_sll(r_X, r_X, 2, ctx); /* delay slot */
+			break;
+		case BPF_ST:
+			/* M[k] <- A */
+			ctx->flags |= SEEN_MEM | SEEN_A;
+			emit_store(r_A, r_M, SCRATCH_OFF(k), ctx);
+			break;
+		case BPF_STX:
+			/* M[k] <- X */
+			ctx->flags |= SEEN_MEM | SEEN_X;
+			emit_store(r_X, r_M, SCRATCH_OFF(k), ctx);
+			break;
+		case BPF_ALU | BPF_ADD | BPF_K:
+			/* A += K */
+			ctx->flags |= SEEN_A;
+			emit_addiu(r_A, r_A, k, ctx);
+			break;
+		case BPF_ALU | BPF_ADD | BPF_X:
+			/* A += X */
+			ctx->flags |= SEEN_A | SEEN_X;
+			emit_addu(r_A, r_A, r_X, ctx);
+			break;
+		case BPF_ALU | BPF_SUB | BPF_K:
+			/* A -= K */
+			ctx->flags |= SEEN_A;
+			emit_addiu(r_A, r_A, -k, ctx);
+			break;
+		case BPF_ALU | BPF_SUB | BPF_X:
+			/* A -= X */
+			ctx->flags |= SEEN_A | SEEN_X;
+			emit_subu(r_A, r_A, r_X, ctx);
+			break;
+		case BPF_ALU | BPF_MUL | BPF_K:
+			/* A *= K */
+			/* Load K to scratch register before MUL */
+			ctx->flags |= SEEN_A;
+			emit_load_imm(r_s0, k, ctx);
+			emit_mul(r_A, r_A, r_s0, ctx);
+			break;
+		case BPF_ALU | BPF_MUL | BPF_X:
+			/* A *= X */
+			ctx->flags |= SEEN_A | SEEN_X;
+			emit_mul(r_A, r_A, r_X, ctx);
+			break;
+		case BPF_ALU | BPF_DIV | BPF_K:
+			/* A /= k */
+			if (k == 1)
+				break;
+			if (optimize_div(&k)) {
+				ctx->flags |= SEEN_A;
+				emit_srl(r_A, r_A, k, ctx);
+				break;
+			}
+			ctx->flags |= SEEN_A;
+			emit_load_imm(r_s0, k, ctx);
+			emit_div(r_A, r_s0, ctx);
+			break;
+		case BPF_ALU | BPF_MOD | BPF_K:
+			/* A %= k */
+			if (k == 1) {
+				ctx->flags |= SEEN_A;
+				emit_jit_reg_move(r_A, r_zero, ctx);
+			} else {
+				ctx->flags |= SEEN_A;
+				emit_load_imm(r_s0, k, ctx);
+				emit_mod(r_A, r_s0, ctx);
+			}
+			break;
+		case BPF_ALU | BPF_DIV | BPF_X:
+			/* A /= X */
+			ctx->flags |= SEEN_X | SEEN_A;
+			/* Check if r_X is zero */
+			emit_bcond(MIPS_COND_EQ, r_X, r_zero,
+				   b_imm(prog->len, ctx), ctx);
+			emit_load_imm(r_ret, 0, ctx); /* delay slot */
+			emit_div(r_A, r_X, ctx);
+			break;
+		case BPF_ALU | BPF_MOD | BPF_X:
+			/* A %= X */
+			ctx->flags |= SEEN_X | SEEN_A;
+			/* Check if r_X is zero */
+			emit_bcond(MIPS_COND_EQ, r_X, r_zero,
+				   b_imm(prog->len, ctx), ctx);
+			emit_load_imm(r_ret, 0, ctx); /* delay slot */
+			emit_mod(r_A, r_X, ctx);
+			break;
+		case BPF_ALU | BPF_OR | BPF_K:
+			/* A |= K */
+			ctx->flags |= SEEN_A;
+			emit_ori(r_A, r_A, k, ctx);
+			break;
+		case BPF_ALU | BPF_OR | BPF_X:
+			/* A |= X */
+			ctx->flags |= SEEN_A;
+			emit_ori(r_A, r_A, r_X, ctx);
+			break;
+		case BPF_ALU | BPF_XOR | BPF_K:
+			/* A ^= k */
+			ctx->flags |= SEEN_A;
+			emit_xori(r_A, r_A, k, ctx);
+			break;
+		case BPF_ANC | SKF_AD_ALU_XOR_X:
+		case BPF_ALU | BPF_XOR | BPF_X:
+			/* A ^= X */
+			ctx->flags |= SEEN_A;
+			emit_xor(r_A, r_A, r_X, ctx);
+			break;
+		case BPF_ALU | BPF_AND | BPF_K:
+			/* A &= K */
+			ctx->flags |= SEEN_A;
+			emit_andi(r_A, r_A, k, ctx);
+			break;
+		case BPF_ALU | BPF_AND | BPF_X:
+			/* A &= X */
+			ctx->flags |= SEEN_A | SEEN_X;
+			emit_and(r_A, r_A, r_X, ctx);
+			break;
+		case BPF_ALU | BPF_LSH | BPF_K:
+			/* A <<= K */
+			ctx->flags |= SEEN_A;
+			emit_sll(r_A, r_A, k, ctx);
+			break;
+		case BPF_ALU | BPF_LSH | BPF_X:
+			/* A <<= X */
+			ctx->flags |= SEEN_A | SEEN_X;
+			emit_sllv(r_A, r_A, r_X, ctx);
+			break;
+		case BPF_ALU | BPF_RSH | BPF_K:
+			/* A >>= K */
+			ctx->flags |= SEEN_A;
+			emit_srl(r_A, r_A, k, ctx);
+			break;
+		case BPF_ALU | BPF_RSH | BPF_X:
+			ctx->flags |= SEEN_A | SEEN_X;
+			emit_srlv(r_A, r_A, r_X, ctx);
+			break;
+		case BPF_ALU | BPF_NEG:
+			/* A = -A */
+			ctx->flags |= SEEN_A;
+			emit_neg(r_A, ctx);
+			break;
+		case BPF_JMP | BPF_JA:
+			/* pc += K */
+			emit_b(b_imm(i + k + 1, ctx), ctx);
+			emit_nop(ctx);
+			break;
+		case BPF_JMP | BPF_JEQ | BPF_K:
+			/* pc += ( A == K ) ? pc->jt : pc->jf */
+			condt = MIPS_COND_EQ | MIPS_COND_K;
+			goto jmp_cmp;
+		case BPF_JMP | BPF_JEQ | BPF_X:
+			ctx->flags |= SEEN_X;
+			/* pc += ( A == X ) ? pc->jt : pc->jf */
+			condt = MIPS_COND_EQ | MIPS_COND_X;
+			goto jmp_cmp;
+		case BPF_JMP | BPF_JGE | BPF_K:
+			/* pc += ( A >= K ) ? pc->jt : pc->jf */
+			condt = MIPS_COND_GE | MIPS_COND_K;
+			goto jmp_cmp;
+		case BPF_JMP | BPF_JGE | BPF_X:
+			ctx->flags |= SEEN_X;
+			/* pc += ( A >= X ) ? pc->jt : pc->jf */
+			condt = MIPS_COND_GE | MIPS_COND_X;
+			goto jmp_cmp;
+		case BPF_JMP | BPF_JGT | BPF_K:
+			/* pc += ( A > K ) ? pc->jt : pc->jf */
+			condt = MIPS_COND_GT | MIPS_COND_K;
+			goto jmp_cmp;
+		case BPF_JMP | BPF_JGT | BPF_X:
+			ctx->flags |= SEEN_X;
+			/* pc += ( A > X ) ? pc->jt : pc->jf */
+			condt = MIPS_COND_GT | MIPS_COND_X;
+jmp_cmp:
+			/* Greater or Equal */
+			if ((condt & MIPS_COND_GE) ||
+			    (condt & MIPS_COND_GT)) {
+				if (condt & MIPS_COND_K) { /* K */
+					ctx->flags |= SEEN_A;
+					emit_sltiu(r_s0, r_A, k, ctx);
+				} else { /* X */
+					ctx->flags |= SEEN_A |
+						SEEN_X;
+					emit_sltu(r_s0, r_A, r_X, ctx);
+				}
+				/* A < (K|X) ? r_scrach = 1 */
+				b_off = b_imm(i + inst->jf + 1, ctx);
+				emit_bcond(MIPS_COND_NE, r_s0, r_zero, b_off,
+					   ctx);
+				emit_nop(ctx);
+				/* A > (K|X) ? scratch = 0 */
+				if (condt & MIPS_COND_GT) {
+					/* Checking for equality */
+					ctx->flags |= SEEN_A | SEEN_X;
+					if (condt & MIPS_COND_K)
+						emit_load_imm(r_s0, k, ctx);
+					else
+						emit_jit_reg_move(r_s0, r_X,
+								  ctx);
+					b_off = b_imm(i + inst->jf + 1, ctx);
+					emit_bcond(MIPS_COND_EQ, r_A, r_s0,
+						   b_off, ctx);
+					emit_nop(ctx);
+					/* Finally, A > K|X */
+					b_off = b_imm(i + inst->jt + 1, ctx);
+					emit_b(b_off, ctx);
+					emit_nop(ctx);
+				} else {
+					/* A >= (K|X) so jump */
+					b_off = b_imm(i + inst->jt + 1, ctx);
+					emit_b(b_off, ctx);
+					emit_nop(ctx);
+				}
+			} else {
+				/* A == K|X */
+				if (condt & MIPS_COND_K) { /* K */
+					ctx->flags |= SEEN_A;
+					emit_load_imm(r_s0, k, ctx);
+					/* jump true */
+					b_off = b_imm(i + inst->jt + 1, ctx);
+					emit_bcond(MIPS_COND_EQ, r_A, r_s0,
+						   b_off, ctx);
+					emit_nop(ctx);
+					/* jump false */
+					b_off = b_imm(i + inst->jf + 1,
+						      ctx);
+					emit_bcond(MIPS_COND_NE, r_A, r_s0,
+						   b_off, ctx);
+					emit_nop(ctx);
+				} else { /* X */
+					/* jump true */
+					ctx->flags |= SEEN_A | SEEN_X;
+					b_off = b_imm(i + inst->jt + 1,
+						      ctx);
+					emit_bcond(MIPS_COND_EQ, r_A, r_X,
+						   b_off, ctx);
+					emit_nop(ctx);
+					/* jump false */
+					b_off = b_imm(i + inst->jf + 1, ctx);
+					emit_bcond(MIPS_COND_NE, r_A, r_X,
+						   b_off, ctx);
+					emit_nop(ctx);
+				}
+			}
+			break;
+		case BPF_JMP | BPF_JSET | BPF_K:
+			ctx->flags |= SEEN_A;
+			/* pc += (A & K) ? pc -> jt : pc -> jf */
+			emit_load_imm(r_s1, k, ctx);
+			emit_and(r_s0, r_A, r_s1, ctx);
+			/* jump true */
+			b_off = b_imm(i + inst->jt + 1, ctx);
+			emit_bcond(MIPS_COND_NE, r_s0, r_zero, b_off, ctx);
+			emit_nop(ctx);
+			/* jump false */
+			b_off = b_imm(i + inst->jf + 1, ctx);
+			emit_b(b_off, ctx);
+			emit_nop(ctx);
+			break;
+		case BPF_JMP | BPF_JSET | BPF_X:
+			ctx->flags |= SEEN_X | SEEN_A;
+			/* pc += (A & X) ? pc -> jt : pc -> jf */
+			emit_and(r_s0, r_A, r_X, ctx);
+			/* jump true */
+			b_off = b_imm(i + inst->jt + 1, ctx);
+			emit_bcond(MIPS_COND_NE, r_s0, r_zero, b_off, ctx);
+			emit_nop(ctx);
+			/* jump false */
+			b_off = b_imm(i + inst->jf + 1, ctx);
+			emit_b(b_off, ctx);
+			emit_nop(ctx);
+			break;
+		case BPF_RET | BPF_A:
+			ctx->flags |= SEEN_A;
+			if (i != prog->len - 1)
+				/*
+				 * If this is not the last instruction
+				 * then jump to the epilogue
+				 */
+				emit_b(b_imm(prog->len, ctx), ctx);
+			emit_reg_move(r_ret, r_A, ctx); /* delay slot */
+			break;
+		case BPF_RET | BPF_K:
+			/*
+			 * It can emit two instructions so it does not fit on
+			 * the delay slot.
+			 */
+			emit_load_imm(r_ret, k, ctx);
+			if (i != prog->len - 1) {
+				/*
+				 * If this is not the last instruction
+				 * then jump to the epilogue
+				 */
+				emit_b(b_imm(prog->len, ctx), ctx);
+				emit_nop(ctx);
+			}
+			break;
+		case BPF_MISC | BPF_TAX:
+			/* X = A */
+			ctx->flags |= SEEN_X | SEEN_A;
+			emit_jit_reg_move(r_X, r_A, ctx);
+			break;
+		case BPF_MISC | BPF_TXA:
+			/* A = X */
+			ctx->flags |= SEEN_A | SEEN_X;
+			emit_jit_reg_move(r_A, r_X, ctx);
+			break;
+		/* AUX */
+		case BPF_ANC | SKF_AD_PROTOCOL:
+			/* A = ntohs(skb->protocol */
+			ctx->flags |= SEEN_SKB | SEEN_OFF | SEEN_A;
+			BUILD_BUG_ON(sizeof_field(struct sk_buff,
+						  protocol) != 2);
+			off = offsetof(struct sk_buff, protocol);
+			emit_half_load(r_A, r_skb, off, ctx);
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+			/* This needs little endian fixup */
+			if (cpu_has_wsbh) {
+				/* R2 and later have the wsbh instruction */
+				emit_wsbh(r_A, r_A, ctx);
+			} else {
+				/* Get first byte */
+				emit_andi(r_tmp_imm, r_A, 0xff, ctx);
+				/* Shift it */
+				emit_sll(r_tmp, r_tmp_imm, 8, ctx);
+				/* Get second byte */
+				emit_srl(r_tmp_imm, r_A, 8, ctx);
+				emit_andi(r_tmp_imm, r_tmp_imm, 0xff, ctx);
+				/* Put everyting together in r_A */
+				emit_or(r_A, r_tmp, r_tmp_imm, ctx);
+			}
+#endif
+			break;
+		case BPF_ANC | SKF_AD_CPU:
+			ctx->flags |= SEEN_A | SEEN_OFF;
+			/* A = current_thread_info()->cpu */
+			BUILD_BUG_ON(sizeof_field(struct thread_info,
+						  cpu) != 4);
+			off = offsetof(struct thread_info, cpu);
+			/* $28/gp points to the thread_info struct */
+			emit_load(r_A, 28, off, ctx);
+			break;
+		case BPF_ANC | SKF_AD_IFINDEX:
+			/* A = skb->dev->ifindex */
+		case BPF_ANC | SKF_AD_HATYPE:
+			/* A = skb->dev->type */
+			ctx->flags |= SEEN_SKB | SEEN_A;
+			off = offsetof(struct sk_buff, dev);
+			/* Load *dev pointer */
+			emit_load_ptr(r_s0, r_skb, off, ctx);
+			/* error (0) in the delay slot */
+			emit_bcond(MIPS_COND_EQ, r_s0, r_zero,
+				   b_imm(prog->len, ctx), ctx);
+			emit_reg_move(r_ret, r_zero, ctx);
+			if (code == (BPF_ANC | SKF_AD_IFINDEX)) {
+				BUILD_BUG_ON(sizeof_field(struct net_device, ifindex) != 4);
+				off = offsetof(struct net_device, ifindex);
+				emit_load(r_A, r_s0, off, ctx);
+			} else { /* (code == (BPF_ANC | SKF_AD_HATYPE) */
+				BUILD_BUG_ON(sizeof_field(struct net_device, type) != 2);
+				off = offsetof(struct net_device, type);
+				emit_half_load_unsigned(r_A, r_s0, off, ctx);
+			}
+			break;
+		case BPF_ANC | SKF_AD_MARK:
+			ctx->flags |= SEEN_SKB | SEEN_A;
+			BUILD_BUG_ON(sizeof_field(struct sk_buff, mark) != 4);
+			off = offsetof(struct sk_buff, mark);
+			emit_load(r_A, r_skb, off, ctx);
+			break;
+		case BPF_ANC | SKF_AD_RXHASH:
+			ctx->flags |= SEEN_SKB | SEEN_A;
+			BUILD_BUG_ON(sizeof_field(struct sk_buff, hash) != 4);
+			off = offsetof(struct sk_buff, hash);
+			emit_load(r_A, r_skb, off, ctx);
+			break;
+		case BPF_ANC | SKF_AD_VLAN_TAG:
+			ctx->flags |= SEEN_SKB | SEEN_A;
+			BUILD_BUG_ON(sizeof_field(struct sk_buff,
+						  vlan_tci) != 2);
+			off = offsetof(struct sk_buff, vlan_tci);
+			emit_half_load_unsigned(r_A, r_skb, off, ctx);
+			break;
+		case BPF_ANC | SKF_AD_VLAN_TAG_PRESENT:
+			ctx->flags |= SEEN_SKB | SEEN_A;
+			emit_load_byte(r_A, r_skb, PKT_VLAN_PRESENT_OFFSET(), ctx);
+			if (PKT_VLAN_PRESENT_BIT)
+				emit_srl(r_A, r_A, PKT_VLAN_PRESENT_BIT, ctx);
+			if (PKT_VLAN_PRESENT_BIT < 7)
+				emit_andi(r_A, r_A, 1, ctx);
+			break;
+		case BPF_ANC | SKF_AD_PKTTYPE:
+			ctx->flags |= SEEN_SKB;
+
+			emit_load_byte(r_tmp, r_skb, PKT_TYPE_OFFSET(), ctx);
+			/* Keep only the last 3 bits */
+			emit_andi(r_A, r_tmp, PKT_TYPE_MAX, ctx);
+#ifdef __BIG_ENDIAN_BITFIELD
+			/* Get the actual packet type to the lower 3 bits */
+			emit_srl(r_A, r_A, 5, ctx);
+#endif
+			break;
+		case BPF_ANC | SKF_AD_QUEUE:
+			ctx->flags |= SEEN_SKB | SEEN_A;
+			BUILD_BUG_ON(sizeof_field(struct sk_buff,
+						  queue_mapping) != 2);
+			BUILD_BUG_ON(offsetof(struct sk_buff,
+					      queue_mapping) > 0xff);
+			off = offsetof(struct sk_buff, queue_mapping);
+			emit_half_load_unsigned(r_A, r_skb, off, ctx);
+			break;
+		default:
+			pr_debug("%s: Unhandled opcode: 0x%02x\n", __FILE__,
+				 inst->code);
+			return -1;
+		}
+	}
+
+	/* compute offsets only during the first pass */
+	if (ctx->target == NULL)
+		ctx->offsets[i] = ctx->idx * 4;
+
+	return 0;
+}
+
+void bpf_jit_compile(struct bpf_prog *fp)
+{
+	struct jit_ctx ctx;
+	unsigned int alloc_size, tmp_idx;
+
+	if (!bpf_jit_enable)
+		return;
+
+	memset(&ctx, 0, sizeof(ctx));
+
+	ctx.offsets = kcalloc(fp->len + 1, sizeof(*ctx.offsets), GFP_KERNEL);
+	if (ctx.offsets == NULL)
+		return;
+
+	ctx.skf = fp;
+
+	if (build_body(&ctx))
+		goto out;
+
+	tmp_idx = ctx.idx;
+	build_prologue(&ctx);
+	ctx.prologue_bytes = (ctx.idx - tmp_idx) * 4;
+	/* just to complete the ctx.idx count */
+	build_epilogue(&ctx);
+
+	alloc_size = 4 * ctx.idx;
+	ctx.target = module_alloc(alloc_size);
+	if (ctx.target == NULL)
+		goto out;
+
+	/* Clean it */
+	memset(ctx.target, 0, alloc_size);
+
+	ctx.idx = 0;
+
+	/* Generate the actual JIT code */
+	build_prologue(&ctx);
+	build_body(&ctx);
+	build_epilogue(&ctx);
+
+	/* Update the icache */
+	flush_icache_range((ptr)ctx.target, (ptr)(ctx.target + ctx.idx));
+
+	if (bpf_jit_enable > 1)
+		/* Dump JIT code */
+		bpf_jit_dump(fp->len, alloc_size, 2, ctx.target);
+
+	fp->bpf_func = (void *)ctx.target;
+	fp->jited = 1;
+
+out:
+	kfree(ctx.offsets);
+}
+
+void bpf_jit_free(struct bpf_prog *fp)
+{
+	if (fp->jited)
+		module_memfree(fp->bpf_func);
+
+	bpf_prog_unlock_free(fp);
+}
diff --git a/arch/mips/net/bpf_jit_asm.S b/arch/mips/net/bpf_jit_asm.S
new file mode 100644
index 000000000000..57154c5883b6
--- /dev/null
+++ b/arch/mips/net/bpf_jit_asm.S
@@ -0,0 +1,285 @@
+/*
+ * bpf_jib_asm.S: Packet/header access helper functions for MIPS/MIPS64 BPF
+ * compiler.
+ *
+ * Copyright (C) 2015 Imagination Technologies Ltd.
+ * Author: Markos Chandras <markos.chandras@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; version 2 of the License.
+ */
+
+#include <asm/asm.h>
+#include <asm/isa-rev.h>
+#include <asm/regdef.h>
+#include "bpf_jit.h"
+
+/* ABI
+ *
+ * r_skb_hl	skb header length
+ * r_skb_data	skb data
+ * r_off(a1)	offset register
+ * r_A		BPF register A
+ * r_X		PF register X
+ * r_skb(a0)	*skb
+ * r_M		*scratch memory
+ * r_skb_le	skb length
+ * r_s0		Scratch register 0
+ * r_s1		Scratch register 1
+ *
+ * On entry:
+ * a0: *skb
+ * a1: offset (imm or imm + X)
+ *
+ * All non-BPF-ABI registers are free for use. On return, we only
+ * care about r_ret. The BPF-ABI registers are assumed to remain
+ * unmodified during the entire filter operation.
+ */
+
+#define skb	a0
+#define offset	a1
+#define SKF_LL_OFF  (-0x200000) /* Can't include linux/filter.h in assembly */
+
+	/* We know better :) so prevent assembler reordering etc */
+	.set 	noreorder
+
+#define is_offset_negative(TYPE)				\
+	/* If offset is negative we have more work to do */	\
+	slti	t0, offset, 0;					\
+	bgtz	t0, bpf_slow_path_##TYPE##_neg;			\
+	/* Be careful what follows in DS. */
+
+#define is_offset_in_header(SIZE, TYPE)				\
+	/* Reading from header? */				\
+	addiu	$r_s0, $r_skb_hl, -SIZE;			\
+	slt	t0, $r_s0, offset;				\
+	bgtz	t0, bpf_slow_path_##TYPE;			\
+
+LEAF(sk_load_word)
+	is_offset_negative(word)
+FEXPORT(sk_load_word_positive)
+	is_offset_in_header(4, word)
+	/* Offset within header boundaries */
+	PTR_ADDU t1, $r_skb_data, offset
+	.set	reorder
+	lw	$r_A, 0(t1)
+	.set	noreorder
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+# if MIPS_ISA_REV >= 2
+	wsbh	t0, $r_A
+	rotr	$r_A, t0, 16
+# else
+	sll	t0, $r_A, 24
+	srl	t1, $r_A, 24
+	srl	t2, $r_A, 8
+	or	t0, t0, t1
+	andi	t2, t2, 0xff00
+	andi	t1, $r_A, 0xff00
+	or	t0, t0, t2
+	sll	t1, t1, 8
+	or	$r_A, t0, t1
+# endif
+#endif
+	jr	$r_ra
+	 move	$r_ret, zero
+	END(sk_load_word)
+
+LEAF(sk_load_half)
+	is_offset_negative(half)
+FEXPORT(sk_load_half_positive)
+	is_offset_in_header(2, half)
+	/* Offset within header boundaries */
+	PTR_ADDU t1, $r_skb_data, offset
+	lhu	$r_A, 0(t1)
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+# if MIPS_ISA_REV >= 2
+	wsbh	$r_A, $r_A
+# else
+	sll	t0, $r_A, 8
+	srl	t1, $r_A, 8
+	andi	t0, t0, 0xff00
+	or	$r_A, t0, t1
+# endif
+#endif
+	jr	$r_ra
+	 move	$r_ret, zero
+	END(sk_load_half)
+
+LEAF(sk_load_byte)
+	is_offset_negative(byte)
+FEXPORT(sk_load_byte_positive)
+	is_offset_in_header(1, byte)
+	/* Offset within header boundaries */
+	PTR_ADDU t1, $r_skb_data, offset
+	lbu	$r_A, 0(t1)
+	jr	$r_ra
+	 move	$r_ret, zero
+	END(sk_load_byte)
+
+/*
+ * call skb_copy_bits:
+ * (prototype in linux/skbuff.h)
+ *
+ * int skb_copy_bits(sk_buff *skb, int offset, void *to, int len)
+ *
+ * o32 mandates we leave 4 spaces for argument registers in case
+ * the callee needs to use them. Even though we don't care about
+ * the argument registers ourselves, we need to allocate that space
+ * to remain ABI compliant since the callee may want to use that space.
+ * We also allocate 2 more spaces for $r_ra and our return register (*to).
+ *
+ * n64 is a bit different. The *caller* will allocate the space to preserve
+ * the arguments. So in 64-bit kernels, we allocate the 4-arg space for no
+ * good reason but it does not matter that much really.
+ *
+ * (void *to) is returned in r_s0
+ *
+ */
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+#define DS_OFFSET(SIZE) (4 * SZREG)
+#else
+#define DS_OFFSET(SIZE) ((4 * SZREG) + (4 - SIZE))
+#endif
+#define bpf_slow_path_common(SIZE)				\
+	/* Quick check. Are we within reasonable boundaries? */ \
+	LONG_ADDIU	$r_s1, $r_skb_len, -SIZE;		\
+	sltu		$r_s0, offset, $r_s1;			\
+	beqz		$r_s0, fault;				\
+	/* Load 4th argument in DS */				\
+	 LONG_ADDIU	a3, zero, SIZE;				\
+	PTR_ADDIU	$r_sp, $r_sp, -(6 * SZREG);		\
+	PTR_LA		t0, skb_copy_bits;			\
+	PTR_S		$r_ra, (5 * SZREG)($r_sp);		\
+	/* Assign low slot to a2 */				\
+	PTR_ADDIU	a2, $r_sp, DS_OFFSET(SIZE);		\
+	jalr		t0;					\
+	/* Reset our destination slot (DS but it's ok) */	\
+	 INT_S		zero, (4 * SZREG)($r_sp);		\
+	/*							\
+	 * skb_copy_bits returns 0 on success and -EFAULT	\
+	 * on error. Our data live in a2. Do not bother with	\
+	 * our data if an error has been returned.		\
+	 */							\
+	/* Restore our frame */					\
+	PTR_L		$r_ra, (5 * SZREG)($r_sp);		\
+	INT_L		$r_s0, (4 * SZREG)($r_sp);		\
+	bltz		v0, fault;				\
+	 PTR_ADDIU	$r_sp, $r_sp, 6 * SZREG;		\
+	move		$r_ret, zero;				\
+
+NESTED(bpf_slow_path_word, (6 * SZREG), $r_sp)
+	bpf_slow_path_common(4)
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+# if MIPS_ISA_REV >= 2
+	wsbh	t0, $r_s0
+	jr	$r_ra
+	 rotr	$r_A, t0, 16
+# else
+	sll	t0, $r_s0, 24
+	srl	t1, $r_s0, 24
+	srl	t2, $r_s0, 8
+	or	t0, t0, t1
+	andi	t2, t2, 0xff00
+	andi	t1, $r_s0, 0xff00
+	or	t0, t0, t2
+	sll	t1, t1, 8
+	jr	$r_ra
+	 or	$r_A, t0, t1
+# endif
+#else
+	jr	$r_ra
+	 move	$r_A, $r_s0
+#endif
+
+	END(bpf_slow_path_word)
+
+NESTED(bpf_slow_path_half, (6 * SZREG), $r_sp)
+	bpf_slow_path_common(2)
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+# if MIPS_ISA_REV >= 2
+	jr	$r_ra
+	 wsbh	$r_A, $r_s0
+# else
+	sll	t0, $r_s0, 8
+	andi	t1, $r_s0, 0xff00
+	andi	t0, t0, 0xff00
+	srl	t1, t1, 8
+	jr	$r_ra
+	 or	$r_A, t0, t1
+# endif
+#else
+	jr	$r_ra
+	 move	$r_A, $r_s0
+#endif
+
+	END(bpf_slow_path_half)
+
+NESTED(bpf_slow_path_byte, (6 * SZREG), $r_sp)
+	bpf_slow_path_common(1)
+	jr	$r_ra
+	 move	$r_A, $r_s0
+
+	END(bpf_slow_path_byte)
+
+/*
+ * Negative entry points
+ */
+	.macro bpf_is_end_of_data
+	li	t0, SKF_LL_OFF
+	/* Reading link layer data? */
+	slt	t1, offset, t0
+	bgtz	t1, fault
+	/* Be careful what follows in DS. */
+	.endm
+/*
+ * call skb_copy_bits:
+ * (prototype in linux/filter.h)
+ *
+ * void *bpf_internal_load_pointer_neg_helper(const struct sk_buff *skb,
+ *                                            int k, unsigned int size)
+ *
+ * see above (bpf_slow_path_common) for ABI restrictions
+ */
+#define bpf_negative_common(SIZE)					\
+	PTR_ADDIU	$r_sp, $r_sp, -(6 * SZREG);			\
+	PTR_LA		t0, bpf_internal_load_pointer_neg_helper;	\
+	PTR_S		$r_ra, (5 * SZREG)($r_sp);			\
+	jalr		t0;						\
+	 li		a2, SIZE;					\
+	PTR_L		$r_ra, (5 * SZREG)($r_sp);			\
+	/* Check return pointer */					\
+	beqz		v0, fault;					\
+	 PTR_ADDIU	$r_sp, $r_sp, 6 * SZREG;			\
+	/* Preserve our pointer */					\
+	move		$r_s0, v0;					\
+	/* Set return value */						\
+	move		$r_ret, zero;					\
+
+bpf_slow_path_word_neg:
+	bpf_is_end_of_data
+NESTED(sk_load_word_negative, (6 * SZREG), $r_sp)
+	bpf_negative_common(4)
+	jr	$r_ra
+	 lw	$r_A, 0($r_s0)
+	END(sk_load_word_negative)
+
+bpf_slow_path_half_neg:
+	bpf_is_end_of_data
+NESTED(sk_load_half_negative, (6 * SZREG), $r_sp)
+	bpf_negative_common(2)
+	jr	$r_ra
+	 lhu	$r_A, 0($r_s0)
+	END(sk_load_half_negative)
+
+bpf_slow_path_byte_neg:
+	bpf_is_end_of_data
+NESTED(sk_load_byte_negative, (6 * SZREG), $r_sp)
+	bpf_negative_common(1)
+	jr	$r_ra
+	 lbu	$r_A, 0($r_s0)
+	END(sk_load_byte_negative)
+
+fault:
+	jr	$r_ra
+	 addiu $r_ret, zero, 1
diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c
index 8e26b120f994..d85cbf84e41c 100644
--- a/arch/mips/pci/pci-ip27.c
+++ b/arch/mips/pci/pci-ip27.c
@@ -10,7 +10,7 @@
 #include <asm/sn/addrs.h>
 #include <asm/sn/types.h>
 #include <asm/sn/klconfig.h>
-#include <asm/sn/hub.h>
+#include <asm/sn/agent.h>
 #include <asm/sn/ioc3.h>
 #include <asm/pci/bridge.h>
 
diff --git a/arch/mips/pci/pci-xtalk-bridge.c b/arch/mips/pci/pci-xtalk-bridge.c
index 5c1a196be0c5..3b2552fb7735 100644
--- a/arch/mips/pci/pci-xtalk-bridge.c
+++ b/arch/mips/pci/pci-xtalk-bridge.c
@@ -437,17 +437,28 @@ static int bridge_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 	struct irq_alloc_info info;
 	int irq;
 
-	irq = bc->pci_int[slot];
+	switch (pin) {
+	case PCI_INTERRUPT_UNKNOWN:
+	case PCI_INTERRUPT_INTA:
+	case PCI_INTERRUPT_INTC:
+		pin = 0;
+		break;
+	case PCI_INTERRUPT_INTB:
+	case PCI_INTERRUPT_INTD:
+		pin = 1;
+	}
+
+	irq = bc->pci_int[slot][pin];
 	if (irq == -1) {
 		info.ctrl = bc;
 		info.nasid = bc->nasid;
-		info.pin = slot;
+		info.pin = bc->int_mapping[slot][pin];
 
 		irq = irq_domain_alloc_irqs(bc->domain, 1, bc->nasid, &info);
 		if (irq < 0)
 			return irq;
 
-		bc->pci_int[slot] = irq;
+		bc->pci_int[slot][pin] = irq;
 	}
 	return irq;
 }
@@ -458,21 +469,26 @@ static void bridge_setup_ip27_baseio6g(struct bridge_controller *bc)
 {
 	bc->ioc3_sid[2] = IOC3_SID(IOC3_SUBSYS_IP27_BASEIO6G);
 	bc->ioc3_sid[6] = IOC3_SID(IOC3_SUBSYS_IP27_MIO);
+	bc->int_mapping[2][1] = 4;
+	bc->int_mapping[6][1] = 6;
 }
 
 static void bridge_setup_ip27_baseio(struct bridge_controller *bc)
 {
 	bc->ioc3_sid[2] = IOC3_SID(IOC3_SUBSYS_IP27_BASEIO);
+	bc->int_mapping[2][1] = 4;
 }
 
 static void bridge_setup_ip29_baseio(struct bridge_controller *bc)
 {
 	bc->ioc3_sid[2] = IOC3_SID(IOC3_SUBSYS_IP29_SYSBOARD);
+	bc->int_mapping[2][1] = 3;
 }
 
 static void bridge_setup_ip30_sysboard(struct bridge_controller *bc)
 {
 	bc->ioc3_sid[2] = IOC3_SID(IOC3_SUBSYS_IP30_SYSBOARD);
+	bc->int_mapping[2][1] = 4;
 }
 
 static void bridge_setup_menet(struct bridge_controller *bc)
@@ -483,6 +499,26 @@ static void bridge_setup_menet(struct bridge_controller *bc)
 	bc->ioc3_sid[3] = IOC3_SID(IOC3_SUBSYS_MENET4);
 }
 
+static void bridge_setup_io7(struct bridge_controller *bc)
+{
+	bc->ioc3_sid[4] = IOC3_SID(IOC3_SUBSYS_IO7);
+}
+
+static void bridge_setup_io8(struct bridge_controller *bc)
+{
+	bc->ioc3_sid[4] = IOC3_SID(IOC3_SUBSYS_IO8);
+}
+
+static void bridge_setup_io9(struct bridge_controller *bc)
+{
+	bc->ioc3_sid[1] = IOC3_SID(IOC3_SUBSYS_IO9);
+}
+
+static void bridge_setup_ip34_fuel_sysboard(struct bridge_controller *bc)
+{
+	bc->ioc3_sid[4] = IOC3_SID(IOC3_SUBSYS_IP34_SYSBOARD);
+}
+
 #define BRIDGE_BOARD_SETUP(_partno, _setup)	\
 	{ .match = _partno, .setup = _setup }
 
@@ -500,6 +536,10 @@ static const struct {
 	BRIDGE_BOARD_SETUP("030-0887-", bridge_setup_ip30_sysboard),
 	BRIDGE_BOARD_SETUP("030-1467-", bridge_setup_ip30_sysboard),
 	BRIDGE_BOARD_SETUP("030-0873-", bridge_setup_menet),
+	BRIDGE_BOARD_SETUP("030-1557-", bridge_setup_io7),
+	BRIDGE_BOARD_SETUP("030-1673-", bridge_setup_io8),
+	BRIDGE_BOARD_SETUP("030-1771-", bridge_setup_io9),
+	BRIDGE_BOARD_SETUP("030-1707-", bridge_setup_ip34_fuel_sysboard),
 };
 
 static void bridge_setup_board(struct bridge_controller *bc, char *partnum)
@@ -655,7 +695,11 @@ static int bridge_probe(struct platform_device *pdev)
 
 	for (slot = 0; slot < 8; slot++) {
 		bridge_set(bc, b_device[slot].reg, BRIDGE_DEV_SWAP_DIR);
-		bc->pci_int[slot] = -1;
+		bc->pci_int[slot][0] = -1;
+		bc->pci_int[slot][1] = -1;
+		/* default interrupt pin mapping */
+		bc->int_mapping[slot][0] = slot;
+		bc->int_mapping[slot][1] = slot ^ 4;
 	}
 	bridge_read(bc, b_wid_tflush);	  /* wait until Bridge PIO complete */
 
diff --git a/arch/mips/ralink/ill_acc.c b/arch/mips/ralink/ill_acc.c
index 0ddeb31afa93..bdf53807d7c2 100644
--- a/arch/mips/ralink/ill_acc.c
+++ b/arch/mips/ralink/ill_acc.c
@@ -67,11 +67,13 @@ static int __init ill_acc_of_setup(void)
 	irq = irq_of_parse_and_map(np, 0);
 	if (!irq) {
 		dev_err(&pdev->dev, "failed to get irq\n");
+		put_device(&pdev->dev);
 		return -EINVAL;
 	}
 
 	if (request_irq(irq, ill_acc_irq_handler, 0, "ill_acc", &pdev->dev)) {
 		dev_err(&pdev->dev, "failed to request irq\n");
+		put_device(&pdev->dev);
 		return -EINVAL;
 	}
 
diff --git a/arch/mips/sgi-ip22/ip22-gio.c b/arch/mips/sgi-ip22/ip22-gio.c
index 282b47c2dc27..de0768a49ee8 100644
--- a/arch/mips/sgi-ip22/ip22-gio.c
+++ b/arch/mips/sgi-ip22/ip22-gio.c
@@ -47,8 +47,9 @@ static struct device gio_bus = {
  * Used by a driver to check whether an of_device present in the
  * system is in its list of supported devices.
  */
-const struct gio_device_id *gio_match_device(const struct gio_device_id *match,
-		     const struct gio_device *dev)
+static const struct gio_device_id *
+gio_match_device(const struct gio_device_id *match,
+		 const struct gio_device *dev)
 {
 	const struct gio_device_id *ids;
 
@@ -58,7 +59,6 @@ const struct gio_device_id *gio_match_device(const struct gio_device_id *match,
 
 	return NULL;
 }
-EXPORT_SYMBOL_GPL(gio_match_device);
 
 struct gio_device *gio_dev_get(struct gio_device *dev)
 {
diff --git a/arch/mips/sgi-ip27/ip27-berr.c b/arch/mips/sgi-ip27/ip27-berr.c
index 73ad29b180fb..5a38ae6bdfa9 100644
--- a/arch/mips/sgi-ip27/ip27-berr.c
+++ b/arch/mips/sgi-ip27/ip27-berr.c
@@ -16,8 +16,8 @@
 
 #include <asm/ptrace.h>
 #include <asm/sn/addrs.h>
+#include <asm/sn/agent.h>
 #include <asm/sn/arch.h>
-#include <asm/sn/sn0/hub.h>
 #include <asm/tlbdebug.h>
 #include <asm/traps.h>
 #include <linux/uaccess.h>
@@ -30,29 +30,31 @@ static void dump_hub_information(unsigned long errst0, unsigned long errst1)
 		{ "WERR", "Uncached Partial Write", "PWERR", "Write Timeout",
 		  NULL, NULL, NULL, NULL }
 	};
-	int wrb = errst1 & PI_ERR_ST1_WRBRRB_MASK;
+	union pi_err_stat0 st0;
+	union pi_err_stat1 st1;
 
-	if (!(errst0 & PI_ERR_ST0_VALID_MASK)) {
-		printk("Hub does not contain valid error information\n");
+	st0.pi_stat0_word = errst0;
+	st1.pi_stat1_word = errst1;
+
+	if (!st0.pi_stat0_fmt.s0_valid) {
+		pr_info("Hub does not contain valid error information\n");
 		return;
 	}
 
-
-	printk("Hub has valid error information:\n");
-	if (errst0 & PI_ERR_ST0_OVERRUN_MASK)
-		printk("Overrun is set.	 Error stack may contain additional "
+	pr_info("Hub has valid error information:\n");
+	if (st0.pi_stat0_fmt.s0_ovr_run)
+		pr_info("Overrun is set. Error stack may contain additional "
 		       "information.\n");
-	printk("Hub error address is %08lx\n",
-	       (errst0 & PI_ERR_ST0_ADDR_MASK) >> (PI_ERR_ST0_ADDR_SHFT - 3));
-	printk("Incoming message command 0x%lx\n",
-	       (errst0 & PI_ERR_ST0_CMD_MASK) >> PI_ERR_ST0_CMD_SHFT);
-	printk("Supplemental field of incoming message is 0x%lx\n",
-	       (errst0 & PI_ERR_ST0_SUPPL_MASK) >> PI_ERR_ST0_SUPPL_SHFT);
-	printk("T5 Rn (for RRB only) is 0x%lx\n",
-	       (errst0 & PI_ERR_ST0_REQNUM_MASK) >> PI_ERR_ST0_REQNUM_SHFT);
-	printk("Error type is %s\n", err_type[wrb]
-	       [(errst0 & PI_ERR_ST0_TYPE_MASK) >> PI_ERR_ST0_TYPE_SHFT]
-		? : "invalid");
+	pr_info("Hub error address is %08lx\n",
+		(unsigned long)st0.pi_stat0_fmt.s0_addr);
+	pr_info("Incoming message command 0x%lx\n",
+		(unsigned long)st0.pi_stat0_fmt.s0_cmd);
+	pr_info("Supplemental field of incoming message is 0x%lx\n",
+		(unsigned long)st0.pi_stat0_fmt.s0_supl);
+	pr_info("T5 Rn (for RRB only) is 0x%lx\n",
+		(unsigned long)st0.pi_stat0_fmt.s0_t5_req);
+	pr_info("Error type is %s\n", err_type[st1.pi_stat1_fmt.s1_rw_rb]
+	       [st0.pi_stat0_fmt.s0_err_type] ? : "invalid");
 }
 
 int ip27_be_handler(struct pt_regs *regs, int is_fixup)
diff --git a/arch/mips/sgi-ip27/ip27-common.h b/arch/mips/sgi-ip27/ip27-common.h
index 3ffbcf9bfd41..ed008a08464c 100644
--- a/arch/mips/sgi-ip27/ip27-common.h
+++ b/arch/mips/sgi-ip27/ip27-common.h
@@ -3,8 +3,18 @@
 #ifndef __IP27_COMMON_H
 #define __IP27_COMMON_H
 
-extern void ip27_reboot_setup(void);
+extern nasid_t master_nasid;
+
+extern void cpu_node_probe(void);
 extern void hub_rt_clock_event_init(void);
+extern void hub_rtc_init(nasid_t nasid);
+extern void install_cpu_nmi_handler(int slice);
+extern void install_ipi(void);
+extern void ip27_reboot_setup(void);
 extern const struct plat_smp_ops ip27_smp_ops;
+extern unsigned long node_getfirstfree(nasid_t nasid);
+extern void per_cpu_init(void);
+extern void replicate_kernel_text(void);
+extern void setup_replication_mask(void);
 
 #endif /* __IP27_COMMON_H */
diff --git a/arch/mips/sgi-ip27/ip27-console.c b/arch/mips/sgi-ip27/ip27-console.c
index 5886bee89d06..7737a88c6569 100644
--- a/arch/mips/sgi-ip27/ip27-console.c
+++ b/arch/mips/sgi-ip27/ip27-console.c
@@ -9,14 +9,15 @@
 #include <asm/page.h>
 #include <asm/setup.h>
 #include <asm/sn/addrs.h>
-#include <asm/sn/sn0/hub.h>
+#include <asm/sn/agent.h>
 #include <asm/sn/klconfig.h>
 #include <asm/sn/ioc3.h>
-#include <asm/sn/sn_private.h>
 
 #include <linux/serial.h>
 #include <linux/serial_core.h>
 
+#include "ip27-common.h"
+
 #define IOC3_CLK	(22000000 / 3)
 #define IOC3_FLAGS	(0)
 
diff --git a/arch/mips/sgi-ip27/ip27-hubio.c b/arch/mips/sgi-ip27/ip27-hubio.c
index a538d0ceb61d..8352eb6403b4 100644
--- a/arch/mips/sgi-ip27/ip27-hubio.c
+++ b/arch/mips/sgi-ip27/ip27-hubio.c
@@ -11,7 +11,9 @@
 #include <linux/mmzone.h>
 #include <asm/sn/addrs.h>
 #include <asm/sn/arch.h>
-#include <asm/sn/hub.h>
+#include <asm/sn/agent.h>
+#include <asm/sn/io.h>
+#include <asm/xtalk/xtalk.h>
 
 
 static int force_fire_and_forget = 1;
@@ -82,7 +84,7 @@ unsigned long hub_pio_map(nasid_t nasid, xwidgetnum_t widget,
  */
 static void hub_setup_prb(nasid_t nasid, int prbnum, int credits)
 {
-	iprb_t prb;
+	union iprb_u prb;
 	int prb_offset;
 
 	/*
@@ -135,7 +137,7 @@ static void hub_setup_prb(nasid_t nasid, int prbnum, int credits)
 static void hub_set_piomode(nasid_t nasid)
 {
 	u64 ii_iowa;
-	hubii_wcr_t ii_wcr;
+	union hubii_wcr_u ii_wcr;
 	unsigned i;
 
 	ii_iowa = REMOTE_HUB_L(nasid, IIO_OUTWIDGET_ACCESS);
diff --git a/arch/mips/sgi-ip27/ip27-init.c b/arch/mips/sgi-ip27/ip27-init.c
index f597e1ee2df7..32bcb8d1dd88 100644
--- a/arch/mips/sgi-ip27/ip27-init.c
+++ b/arch/mips/sgi-ip27/ip27-init.c
@@ -19,23 +19,18 @@
 #include <asm/pgtable.h>
 #include <asm/sgialib.h>
 #include <asm/time.h>
+#include <asm/sn/agent.h>
 #include <asm/sn/types.h>
-#include <asm/sn/sn0/addrs.h>
-#include <asm/sn/sn0/hubni.h>
-#include <asm/sn/sn0/hubio.h>
 #include <asm/sn/klconfig.h>
 #include <asm/sn/ioc3.h>
 #include <asm/mipsregs.h>
 #include <asm/sn/gda.h>
-#include <asm/sn/hub.h>
 #include <asm/sn/intr.h>
 #include <asm/current.h>
 #include <asm/processor.h>
 #include <asm/mmu_context.h>
 #include <asm/thread_info.h>
 #include <asm/sn/launch.h>
-#include <asm/sn/sn_private.h>
-#include <asm/sn/sn0/ip27.h>
 #include <asm/sn/mapped_kernel.h>
 
 #include "ip27-common.h"
@@ -77,18 +72,14 @@ static void per_hub_init(nasid_t nasid)
 void per_cpu_init(void)
 {
 	int cpu = smp_processor_id();
-	int slice = LOCAL_HUB_L(PI_CPU_NUM);
 	nasid_t nasid = get_nasid();
-	struct hub_data *hub = hub_data(nasid);
-
-	if (test_and_set_bit(slice, &hub->slice_map))
-		return;
 
 	clear_c0_status(ST0_IM);
 
 	per_hub_init(nasid);
 
-	cpu_time_init();
+	pr_info("CPU %d clock is %dMHz.\n", cpu, sn_cpu_info[cpu].p_speed);
+
 	install_ipi();
 
 	/* Install our NMI handler if symmon hasn't installed one. */
@@ -98,16 +89,6 @@ void per_cpu_init(void)
 	enable_percpu_irq(IP27_HUB_PEND1_IRQ, IRQ_TYPE_NONE);
 }
 
-/*
- * get_nasid() returns the physical node id number of the caller.
- */
-nasid_t
-get_nasid(void)
-{
-	return (nasid_t)((LOCAL_HUB_L(NI_STATUS_REV_ID) & NSRI_NODEID_MASK)
-			 >> NSRI_NODEID_SHFT);
-}
-
 void __init plat_mem_setup(void)
 {
 	u64 p, e, n_mode;
diff --git a/arch/mips/sgi-ip27/ip27-irq.c b/arch/mips/sgi-ip27/ip27-irq.c
index c72ae330ea93..42df9fafa943 100644
--- a/arch/mips/sgi-ip27/ip27-irq.c
+++ b/arch/mips/sgi-ip27/ip27-irq.c
@@ -19,7 +19,6 @@
 #include <asm/sn/addrs.h>
 #include <asm/sn/agent.h>
 #include <asm/sn/arch.h>
-#include <asm/sn/hub.h>
 #include <asm/sn/intr.h>
 #include <asm/sn/irq_alloc.h>
 
@@ -288,11 +287,9 @@ void __init arch_init_irq(void)
 	 * Mark these as reserved right away so they won't be used accidentally
 	 * later.
 	 */
-	for (i = 0; i <= BASE_PCI_IRQ; i++)
+	for (i = 0; i <= CPU_CALL_B_IRQ; i++)
 		set_bit(i, hub_irq_map);
 
-	set_bit(IP_PEND0_6_63, hub_irq_map);
-
 	for (i = NI_BRDCAST_ERR_A; i <= MSC_PANIC_INTR; i++)
 		set_bit(i, hub_irq_map);
 
diff --git a/arch/mips/sgi-ip27/ip27-klconfig.c b/arch/mips/sgi-ip27/ip27-klconfig.c
index 6cb2160e7689..81a1646e609a 100644
--- a/arch/mips/sgi-ip27/ip27-klconfig.c
+++ b/arch/mips/sgi-ip27/ip27-klconfig.c
@@ -72,54 +72,3 @@ lboard_t *find_lboard_class(lboard_t *start, unsigned char brd_type)
 	/* Didn't find it. */
 	return (lboard_t *)NULL;
 }
-
-klcpu_t *nasid_slice_to_cpuinfo(nasid_t nasid, int slice)
-{
-	lboard_t *brd;
-	klcpu_t *acpu;
-
-	if (!(brd = find_lboard((lboard_t *)KL_CONFIG_INFO(nasid), KLTYPE_IP27)))
-		return (klcpu_t *)NULL;
-
-	if (!(acpu = (klcpu_t *)find_first_component(brd, KLSTRUCT_CPU)))
-		return (klcpu_t *)NULL;
-
-	do {
-		if ((acpu->cpu_info.physid) == slice)
-			return acpu;
-	} while ((acpu = (klcpu_t *)find_component(brd, (klinfo_t *)acpu,
-								KLSTRUCT_CPU)));
-	return (klcpu_t *)NULL;
-}
-
-klcpu_t *sn_get_cpuinfo(cpuid_t cpu)
-{
-	nasid_t nasid;
-	int slice;
-	klcpu_t *acpu;
-
-	if (!(cpu < MAXCPUS)) {
-		printk("sn_get_cpuinfo: illegal cpuid 0x%lx\n", cpu);
-		return NULL;
-	}
-
-	nasid = cputonasid(cpu);
-	if (nasid  == INVALID_NASID)
-		return NULL;
-
-	for (slice = 0; slice < CPUS_PER_NODE; slice++) {
-		acpu = nasid_slice_to_cpuinfo(nasid, slice);
-		if (acpu && acpu->cpu_info.virtid == cpu)
-			return acpu;
-	}
-	return NULL;
-}
-
-int get_cpu_slice(cpuid_t cpu)
-{
-	klcpu_t *acpu;
-
-	if ((acpu = sn_get_cpuinfo(cpu)) == NULL)
-		return -1;
-	return acpu->cpu_info.physid;
-}
diff --git a/arch/mips/sgi-ip27/ip27-klnuma.c b/arch/mips/sgi-ip27/ip27-klnuma.c
index ee1c6ff4aa00..abd7a84df7dd 100644
--- a/arch/mips/sgi-ip27/ip27-klnuma.c
+++ b/arch/mips/sgi-ip27/ip27-klnuma.c
@@ -16,11 +16,11 @@
 #include <asm/sn/types.h>
 #include <asm/sn/arch.h>
 #include <asm/sn/gda.h>
-#include <asm/sn/hub.h>
 #include <asm/sn/mapped_kernel.h>
-#include <asm/sn/sn_private.h>
 
-static cpumask_t ktext_repmask;
+#include "ip27-common.h"
+
+static nodemask_t ktext_repmask;
 
 /*
  * XXX - This needs to be much smarter about where it puts copies of the
@@ -30,8 +30,8 @@ static cpumask_t ktext_repmask;
 void __init setup_replication_mask(void)
 {
 	/* Set only the master cnode's bit.  The master cnode is always 0. */
-	cpumask_clear(&ktext_repmask);
-	cpumask_set_cpu(0, &ktext_repmask);
+	nodes_clear(ktext_repmask);
+	node_set(0, ktext_repmask);
 
 #ifdef CONFIG_REPLICATE_KTEXT
 #ifndef CONFIG_MAPPED_KERNEL
@@ -44,7 +44,7 @@ void __init setup_replication_mask(void)
 			if (nasid == 0)
 				continue;
 			/* Advertise that we have a copy of the kernel */
-			cpumask_set_cpu(nasid, &ktext_repmask);
+			node_set(nasid, ktext_repmask);
 		}
 	}
 #endif
@@ -98,7 +98,7 @@ void __init replicate_kernel_text(void)
 			continue;
 
 		/* Check if this node should get a copy of the kernel */
-		if (cpumask_test_cpu(client_nasid, &ktext_repmask)) {
+		if (node_isset(client_nasid, ktext_repmask)) {
 			server_nasid = client_nasid;
 			copy_kernel(server_nasid);
 		}
@@ -122,7 +122,7 @@ unsigned long node_getfirstfree(nasid_t nasid)
 	loadbase += 16777216;
 #endif
 	offset = PAGE_ALIGN((unsigned long)(&_end)) - loadbase;
-	if ((nasid == 0) || (cpumask_test_cpu(nasid, &ktext_repmask)))
+	if ((nasid == 0) || (node_isset(nasid, ktext_repmask)))
 		return TO_NODE(nasid, offset) >> PAGE_SHIFT;
 	else
 		return KDM_TO_PHYS(PAGE_ALIGN(SYMMON_STK_ADDR(nasid, 0))) >> PAGE_SHIFT;
diff --git a/arch/mips/sgi-ip27/ip27-memory.c b/arch/mips/sgi-ip27/ip27-memory.c
index 563aad5e6398..a45691e6ab90 100644
--- a/arch/mips/sgi-ip27/ip27-memory.c
+++ b/arch/mips/sgi-ip27/ip27-memory.c
@@ -25,10 +25,10 @@
 #include <asm/sections.h>
 
 #include <asm/sn/arch.h>
-#include <asm/sn/hub.h>
+#include <asm/sn/agent.h>
 #include <asm/sn/klconfig.h>
-#include <asm/sn/sn_private.h>
 
+#include "ip27-common.h"
 
 #define SLOT_PFNSHIFT		(SLOT_SHIFT - PAGE_SHIFT)
 #define PFN_NASIDSHFT		(NASID_SHFT - PAGE_SHIFT)
@@ -37,31 +37,18 @@ struct node_data *__node_data[MAX_NUMNODES];
 
 EXPORT_SYMBOL(__node_data);
 
-static int fine_mode;
-
-static int is_fine_dirmode(void)
-{
-	return ((LOCAL_HUB_L(NI_STATUS_REV_ID) & NSRI_REGIONSIZE_MASK) >> NSRI_REGIONSIZE_SHFT) & REGIONSIZE_FINE;
-}
-
-static u64 get_region(nasid_t nasid)
-{
-	if (fine_mode)
-		return nasid >> NASID_TO_FINEREG_SHFT;
-	else
-		return nasid >> NASID_TO_COARSEREG_SHFT;
-}
-
-static u64 region_mask;
-
-static void gen_region_mask(u64 *region_mask)
+static u64 gen_region_mask(void)
 {
+	int region_shift;
+	u64 region_mask;
 	nasid_t nasid;
 
-	(*region_mask) = 0;
-	for_each_online_node(nasid) {
-		(*region_mask) |= 1ULL << get_region(nasid);
-	}
+	region_shift = get_region_shift();
+	region_mask = 0;
+	for_each_online_node(nasid)
+		region_mask |= BIT_ULL(nasid >> region_shift);
+
+	return region_mask;
 }
 
 #define rou_rflag	rou_flags
@@ -148,25 +135,25 @@ static int __init compute_node_distance(nasid_t nasid_a, nasid_t nasid_b)
 		} while ((brd = find_lboard_class(KLCF_NEXT(brd), KLTYPE_ROUTER)));
 	}
 
+	if (nasid_a == nasid_b)
+		return LOCAL_DISTANCE;
+
+	if (router_a == router_b)
+		return LOCAL_DISTANCE + 1;
+
 	if (router_a == NULL) {
 		pr_info("node_distance: router_a NULL\n");
-		return -1;
+		return 255;
 	}
 	if (router_b == NULL) {
 		pr_info("node_distance: router_b NULL\n");
-		return -1;
+		return 255;
 	}
 
-	if (nasid_a == nasid_b)
-		return 0;
-
-	if (router_a == router_b)
-		return 1;
-
 	router_distance = 100;
 	router_recurse(router_a, router_b, 2);
 
-	return router_distance;
+	return LOCAL_DISTANCE + router_distance;
 }
 
 static void __init init_topology_matrix(void)
@@ -281,10 +268,10 @@ static unsigned long __init slot_psize_compute(nasid_t nasid, int slot)
 
 static void __init mlreset(void)
 {
+	u64 region_mask;
 	nasid_t nasid;
 
 	master_nasid = get_nasid();
-	fine_mode = is_fine_dirmode();
 
 	/*
 	 * Probe for all CPUs - this creates the cpumask and sets up the
@@ -297,7 +284,7 @@ static void __init mlreset(void)
 	init_topology_matrix();
 	dump_topology();
 
-	gen_region_mask(&region_mask);
+	region_mask = gen_region_mask();
 
 	setup_replication_mask();
 
diff --git a/arch/mips/sgi-ip27/ip27-nmi.c b/arch/mips/sgi-ip27/ip27-nmi.c
index daf3670d94e7..84889b57d5ff 100644
--- a/arch/mips/sgi-ip27/ip27-nmi.c
+++ b/arch/mips/sgi-ip27/ip27-nmi.c
@@ -9,7 +9,7 @@
 #include <asm/sn/addrs.h>
 #include <asm/sn/nmi.h>
 #include <asm/sn/arch.h>
-#include <asm/sn/sn0/hub.h>
+#include <asm/sn/agent.h>
 
 #if 0
 #define NODE_NUM_CPUS(n)	CNODE_NUM_CPUS(n)
@@ -17,6 +17,9 @@
 #define NODE_NUM_CPUS(n)	CPUS_PER_NODE
 #endif
 
+#define SEND_NMI(_nasid, _slice)	\
+	REMOTE_HUB_S((_nasid),  (PI_NMI_A + ((_slice) * PI_NMI_OFFSET)), 1)
+
 typedef unsigned long machreg_t;
 
 static arch_spinlock_t nmi_lock = __ARCH_SPIN_LOCK_UNLOCKED;
diff --git a/arch/mips/sgi-ip27/ip27-reset.c b/arch/mips/sgi-ip27/ip27-reset.c
index 74d078247e49..5ac5ad638734 100644
--- a/arch/mips/sgi-ip27/ip27-reset.c
+++ b/arch/mips/sgi-ip27/ip27-reset.c
@@ -22,9 +22,9 @@
 #include <asm/reboot.h>
 #include <asm/sgialib.h>
 #include <asm/sn/addrs.h>
+#include <asm/sn/agent.h>
 #include <asm/sn/arch.h>
 #include <asm/sn/gda.h>
-#include <asm/sn/sn0/hub.h>
 
 #include "ip27-common.h"
 
diff --git a/arch/mips/sgi-ip27/ip27-smp.c b/arch/mips/sgi-ip27/ip27-smp.c
index faa0244c8b0c..5d2652a1d35a 100644
--- a/arch/mips/sgi-ip27/ip27-smp.c
+++ b/arch/mips/sgi-ip27/ip27-smp.c
@@ -15,36 +15,22 @@
 #include <asm/page.h>
 #include <asm/processor.h>
 #include <asm/ptrace.h>
+#include <asm/sn/agent.h>
 #include <asm/sn/arch.h>
 #include <asm/sn/gda.h>
 #include <asm/sn/intr.h>
 #include <asm/sn/klconfig.h>
 #include <asm/sn/launch.h>
 #include <asm/sn/mapped_kernel.h>
-#include <asm/sn/sn_private.h>
 #include <asm/sn/types.h>
-#include <asm/sn/sn0/hubpi.h>
-#include <asm/sn/sn0/hubio.h>
-#include <asm/sn/sn0/ip27.h>
 
 #include "ip27-common.h"
 
-/*
- * Takes as first input the PROM assigned cpu id, and the kernel
- * assigned cpu id as the second.
- */
-static void alloc_cpupda(nasid_t nasid, cpuid_t cpu, int cpunum)
-{
-	cputonasid(cpunum) = nasid;
-	cputoslice(cpunum) = get_cpu_slice(cpu);
-}
-
-static int do_cpumask(nasid_t nasid, int highest)
+static int node_scan_cpus(nasid_t nasid, int highest)
 {
-	static int tot_cpus_found = 0;
+	static int cpus_found;
 	lboard_t *brd;
 	klcpu_t *acpu;
-	int cpus_found = 0;
 	cpuid_t cpuid;
 
 	brd = find_lboard((lboard_t *)KL_CONFIG_INFO(nasid), KLTYPE_IP27);
@@ -55,13 +41,15 @@ static int do_cpumask(nasid_t nasid, int highest)
 			cpuid = acpu->cpu_info.virtid;
 			/* Only let it join in if it's marked enabled */
 			if ((acpu->cpu_info.flags & KLINFO_ENABLE) &&
-			    (tot_cpus_found != NR_CPUS)) {
+			    (cpus_found != NR_CPUS)) {
 				if (cpuid > highest)
 					highest = cpuid;
 				set_cpu_possible(cpuid, true);
-				alloc_cpupda(nasid, cpuid, tot_cpus_found);
+				cputonasid(cpus_found) = nasid;
+				cputoslice(cpus_found) = acpu->cpu_info.physid;
+				sn_cpu_info[cpus_found].p_speed =
+							acpu->cpu_speed;
 				cpus_found++;
-				tot_cpus_found++;
 			}
 			acpu = (klcpu_t *)find_component(brd, (klinfo_t *)acpu,
 								KLSTRUCT_CPU);
@@ -87,7 +75,7 @@ void cpu_node_probe(void)
 		if (nasid == INVALID_NASID)
 			break;
 		node_set_online(nasid);
-		highest = do_cpumask(nasid, highest);
+		highest = node_scan_cpus(nasid, highest);
 	}
 
 	printk("Discovered %d cpus on %d nodes\n", highest + 1, num_online_nodes());
@@ -180,7 +168,8 @@ static void __init ip27_smp_setup(void)
 	/*
 	 * PROM sets up system, that boot cpu is always first CPU on nasid 0
 	 */
-	alloc_cpupda(0, 0, 0);
+	cputonasid(0) = 0;
+	cputoslice(0) = LOCAL_HUB_L(PI_CPU_NUM);
 }
 
 static void __init ip27_prepare_cpus(unsigned int max_cpus)
diff --git a/arch/mips/sgi-ip27/ip27-timer.c b/arch/mips/sgi-ip27/ip27-timer.c
index 17302bbfa7a6..61f3565f3645 100644
--- a/arch/mips/sgi-ip27/ip27-timer.c
+++ b/arch/mips/sgi-ip27/ip27-timer.c
@@ -25,17 +25,14 @@
 #include <asm/sn/klconfig.h>
 #include <asm/sn/arch.h>
 #include <asm/sn/addrs.h>
-#include <asm/sn/sn_private.h>
-#include <asm/sn/sn0/ip27.h>
-#include <asm/sn/sn0/hub.h>
+#include <asm/sn/agent.h>
+
+#include "ip27-common.h"
 
 #define TICK_SIZE (tick_nsec / 1000)
 
 /* Includes for ioc3_init().  */
 #include <asm/sn/types.h>
-#include <asm/sn/sn0/addrs.h>
-#include <asm/sn/sn0/hubni.h>
-#include <asm/sn/sn0/hubio.h>
 #include <asm/pci/bridge.h>
 
 #include "ip27-common.h"
@@ -153,25 +150,6 @@ void __init plat_time_init(void)
 	hub_rt_clock_event_init();
 }
 
-void cpu_time_init(void)
-{
-	lboard_t *board;
-	klcpu_t *cpu;
-	int cpuid;
-
-	/* Don't use ARCS.  ARCS is fragile.  Klconfig is simple and sane.  */
-	board = find_lboard(KL_CONFIG_INFO(get_nasid()), KLTYPE_IP27);
-	if (!board)
-		panic("Can't find board info for myself.");
-
-	cpuid = LOCAL_HUB_L(PI_CPU_NUM) ? IP27_CPU0_INDEX : IP27_CPU1_INDEX;
-	cpu = (klcpu_t *) KLCF_COMP(board, cpuid);
-	if (!cpu)
-		panic("No information about myself?");
-
-	printk("CPU %d clock is %dMHz.\n", smp_processor_id(), cpu->cpu_speed);
-}
-
 void hub_rtc_init(nasid_t nasid)
 {
 
@@ -190,23 +168,3 @@ void hub_rtc_init(nasid_t nasid)
 		LOCAL_HUB_S(PI_RT_PEND_B, 0);
 	}
 }
-
-static int __init sgi_ip27_rtc_devinit(void)
-{
-	struct resource res;
-
-	memset(&res, 0, sizeof(res));
-	res.start = XPHYSADDR(KL_CONFIG_CH_CONS_INFO(master_nasid)->memory_base +
-			      IOC3_BYTEBUS_DEV0);
-	res.end = res.start + 32767;
-	res.flags = IORESOURCE_MEM;
-
-	return IS_ERR(platform_device_register_simple("rtc-m48t35", -1,
-						      &res, 1));
-}
-
-/*
- * kludge make this a device_initcall after ioc3 resource conflicts
- * are resolved
- */
-late_initcall(sgi_ip27_rtc_devinit);
diff --git a/arch/mips/sgi-ip27/ip27-xtalk.c b/arch/mips/sgi-ip27/ip27-xtalk.c
index 5218b900f855..000ede156bdc 100644
--- a/arch/mips/sgi-ip27/ip27-xtalk.c
+++ b/arch/mips/sgi-ip27/ip27-xtalk.c
@@ -15,7 +15,6 @@
 #include <asm/sn/addrs.h>
 #include <asm/sn/types.h>
 #include <asm/sn/klconfig.h>
-#include <asm/sn/hub.h>
 #include <asm/pci/bridge.h>
 #include <asm/xtalk/xtalk.h>
 
diff --git a/arch/mips/sgi-ip30/ip30-irq.c b/arch/mips/sgi-ip30/ip30-irq.c
index d46655b914f1..c2ffcb920250 100644
--- a/arch/mips/sgi-ip30/ip30-irq.c
+++ b/arch/mips/sgi-ip30/ip30-irq.c
@@ -232,9 +232,10 @@ static void heart_domain_free(struct irq_domain *domain,
 		return;
 
 	irqd = irq_domain_get_irq_data(domain, virq);
-	clear_bit(irqd->hwirq, heart_irq_map);
-	if (irqd && irqd->chip_data)
+	if (irqd) {
+		clear_bit(irqd->hwirq, heart_irq_map);
 		kfree(irqd->chip_data);
+	}
 }
 
 static const struct irq_domain_ops heart_domain_ops = {
diff --git a/arch/mips/vdso/genvdso.c b/arch/mips/vdso/genvdso.c
index b66b6b1c4aeb..be57b832bbe0 100644
--- a/arch/mips/vdso/genvdso.c
+++ b/arch/mips/vdso/genvdso.c
@@ -251,6 +251,18 @@ int main(int argc, char **argv)
 	fprintf(out_file, "#include <linux/linkage.h>\n");
 	fprintf(out_file, "#include <linux/mm.h>\n");
 	fprintf(out_file, "#include <asm/vdso.h>\n");
+	fprintf(out_file, "static int vdso_mremap(\n");
+	fprintf(out_file, "	const struct vm_special_mapping *sm,\n");
+	fprintf(out_file, "	struct vm_area_struct *new_vma)\n");
+	fprintf(out_file, "{\n");
+	fprintf(out_file, "	unsigned long new_size =\n");
+	fprintf(out_file, "	new_vma->vm_end - new_vma->vm_start;\n");
+	fprintf(out_file, "	if (vdso_image.size != new_size)\n");
+	fprintf(out_file, "		return -EINVAL;\n");
+	fprintf(out_file, "	current->mm->context.vdso =\n");
+	fprintf(out_file, "	(void __user *)(new_vma->vm_start);\n");
+	fprintf(out_file, "	return 0;\n");
+	fprintf(out_file, "}\n");
 
 	/* Write out the stripped VDSO data. */
 	fprintf(out_file,
@@ -275,6 +287,7 @@ int main(int argc, char **argv)
 	fprintf(out_file, "\t.mapping = {\n");
 	fprintf(out_file, "\t\t.name = \"[vdso]\",\n");
 	fprintf(out_file, "\t\t.pages = vdso_pages,\n");
+	fprintf(out_file, "\t\t.mremap = vdso_mremap,\n");
 	fprintf(out_file, "\t},\n");
 
 	/* Calculate and write symbol offsets to <output file> */
diff --git a/arch/nds32/kernel/setup.c b/arch/nds32/kernel/setup.c
index 31d29d92478e..a066efbe53c0 100644
--- a/arch/nds32/kernel/setup.c
+++ b/arch/nds32/kernel/setup.c
@@ -317,11 +317,6 @@ void __init setup_arch(char **cmdline_p)
 
 	unflatten_and_copy_device_tree();
 
-	if(IS_ENABLED(CONFIG_VT)) {
-		if(IS_ENABLED(CONFIG_DUMMY_CONSOLE))
-			conswitchp = &dummy_con;
-	}
-
 	*cmdline_p = boot_command_line;
 	early_trap_init();
 }
diff --git a/arch/nios2/kernel/setup.c b/arch/nios2/kernel/setup.c
index 4cf35b09c0ec..3c6e3c813a0b 100644
--- a/arch/nios2/kernel/setup.c
+++ b/arch/nios2/kernel/setup.c
@@ -196,8 +196,4 @@ void __init setup_arch(char **cmdline_p)
 	 * get kmalloc into gear
 	 */
 	paging_init();
-
-#if defined(CONFIG_VT) && defined(CONFIG_DUMMY_CONSOLE)
-	conswitchp = &dummy_con;
-#endif
 }
diff --git a/arch/openrisc/kernel/setup.c b/arch/openrisc/kernel/setup.c
index d668f5be3a99..c0a774b51e45 100644
--- a/arch/openrisc/kernel/setup.c
+++ b/arch/openrisc/kernel/setup.c
@@ -308,11 +308,6 @@ void __init setup_arch(char **cmdline_p)
 	/* paging_init() sets up the MMU and marks all pages as reserved */
 	paging_init();
 
-#if defined(CONFIG_VT) && defined(CONFIG_DUMMY_CONSOLE)
-	if (!conswitchp)
-		conswitchp = &dummy_con;
-#endif
-
 	*cmdline_p = boot_command_line;
 
 	printk(KERN_INFO "OpenRISC Linux -- http://openrisc.io\n");
diff --git a/arch/parisc/configs/712_defconfig b/arch/parisc/configs/712_defconfig
deleted file mode 100644
index d3e3d94e90c3..000000000000
--- a/arch/parisc/configs/712_defconfig
+++ /dev/null
@@ -1,181 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_PA7100LC=y
-CONFIG_PREEMPT_VOLUNTARY=y
-CONFIG_GSC_LASI=y
-# CONFIG_PDC_CHASSIS is not set
-CONFIG_BINFMT_MISC=m
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=m
-CONFIG_NET_KEY=m
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_DIAG=m
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-CONFIG_LLC2=m
-CONFIG_NET_PKTGEN=m
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_PARPORT=y
-CONFIG_PARPORT_PC=m
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=6144
-CONFIG_ATA_OVER_ETH=m
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_ISCSI_ATTRS=m
-CONFIG_SCSI_LASI700=y
-CONFIG_SCSI_DEBUG=m
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-CONFIG_NETDEVICES=y
-CONFIG_BONDING=m
-CONFIG_DUMMY=m
-CONFIG_TUN=m
-CONFIG_LASI_82596=y
-CONFIG_PPP=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-# CONFIG_KEYBOARD_HIL_OLD is not set
-CONFIG_MOUSE_SERIAL=m
-CONFIG_LEGACY_PTY_COUNT=64
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=17
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_MUX is not set
-CONFIG_PDC_CONSOLE=y
-CONFIG_PRINTER=m
-CONFIG_PPDEV=m
-# CONFIG_HW_RANDOM is not set
-CONFIG_RAW_DRIVER=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_TILEBLITTING=y
-CONFIG_DUMMY_CONSOLE_COLUMNS=128
-CONFIG_DUMMY_CONSOLE_ROWS=48
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-# CONFIG_LOGO_LINUX_CLUT224 is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_SEQUENCER=y
-CONFIG_SND_HARMONY=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_JFS_FS=m
-CONFIG_XFS_FS=m
-CONFIG_AUTOFS4_FS=y
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_UFS_FS=m
-CONFIG_NFS_FS=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V4=y
-CONFIG_CIFS=m
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-CONFIG_DEBUG_FS=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_HW is not set
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
diff --git a/arch/parisc/configs/a500_defconfig b/arch/parisc/configs/a500_defconfig
deleted file mode 100644
index 3335734bfadd..000000000000
--- a/arch/parisc/configs/a500_defconfig
+++ /dev/null
@@ -1,177 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_PA8X00=y
-CONFIG_64BIT=y
-CONFIG_SMP=y
-CONFIG_NR_CPUS=8
-# CONFIG_GSC is not set
-CONFIG_PCI=y
-CONFIG_PCI_LBA=y
-CONFIG_PCCARD=m
-# CONFIG_PCMCIA_LOAD_CIS is not set
-CONFIG_YENTA=m
-CONFIG_PD6729=m
-CONFIG_I82092=m
-# CONFIG_SUPERIO is not set
-# CONFIG_CHASSIS_LCD_LED is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=m
-CONFIG_NET_KEY=m
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_IP_DCCP=m
-# CONFIG_IP_DCCP_CCID3 is not set
-CONFIG_LLC2=m
-CONFIG_NET_PKTGEN=m
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_BLK_DEV_UMEM=m
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=6144
-CONFIG_RAID_ATTRS=m
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_ISCSI_ATTRS=m
-CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_SCSI_QLOGIC_1280=m
-CONFIG_SCSI_DEBUG=m
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=y
-CONFIG_MD_LINEAR=y
-CONFIG_MD_RAID0=y
-CONFIG_MD_RAID1=y
-CONFIG_FUSION=y
-CONFIG_FUSION_SPI=m
-CONFIG_FUSION_CTL=m
-CONFIG_NETDEVICES=y
-CONFIG_BONDING=m
-CONFIG_DUMMY=m
-CONFIG_TUN=m
-CONFIG_PCMCIA_3C574=m
-CONFIG_PCMCIA_3C589=m
-CONFIG_VORTEX=m
-CONFIG_TYPHOON=m
-CONFIG_ACENIC=m
-CONFIG_ACENIC_OMIT_TIGON_I=y
-CONFIG_PCNET32=m
-CONFIG_TIGON3=m
-CONFIG_NET_TULIP=y
-CONFIG_DE2104X=m
-CONFIG_TULIP=y
-CONFIG_TULIP_MMIO=y
-CONFIG_PCMCIA_XIRCOM=m
-CONFIG_HP100=m
-CONFIG_E100=m
-CONFIG_E1000=m
-CONFIG_PCMCIA_SMC91C92=m
-CONFIG_PCMCIA_XIRC2PS=m
-CONFIG_PPP=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_CS=m
-CONFIG_SERIAL_8250_NR_UARTS=17
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_PDC_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_RAW_DRIVER=y
-# CONFIG_HWMON is not set
-CONFIG_AGP=y
-CONFIG_AGP_PARISC=y
-# CONFIG_STI_CONSOLE is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_JFS_FS=m
-CONFIG_XFS_FS=m
-CONFIG_AUTOFS4_FS=y
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_UFS_FS=m
-CONFIG_NFS_FS=m
-CONFIG_NFS_V4=m
-CONFIG_NFSD=m
-CONFIG_NFSD_V4=y
-CONFIG_CIFS=m
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_UTF8=m
-CONFIG_DEBUG_FS=y
-CONFIG_HEADERS_INSTALL=y
-CONFIG_HEADERS_CHECK=y
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_BLOWFISH=m
-# CONFIG_CRYPTO_HW is not set
diff --git a/arch/parisc/configs/b180_defconfig b/arch/parisc/configs/b180_defconfig
deleted file mode 100644
index 07fde5bd6974..000000000000
--- a/arch/parisc/configs/b180_defconfig
+++ /dev/null
@@ -1,97 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODVERSIONS=y
-CONFIG_PA7100LC=y
-CONFIG_HPPB=y
-CONFIG_IOMMU_CCIO=y
-CONFIG_GSC_LASI=y
-CONFIG_GSC_WAX=y
-CONFIG_EISA=y
-CONFIG_ISA=y
-CONFIG_PCI=y
-CONFIG_GSC_DINO=y
-# CONFIG_PDC_CHASSIS is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_PARPORT=y
-CONFIG_PARPORT_PC=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=y
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_ATA_OVER_ETH=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_LASI700=y
-CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
-CONFIG_SCSI_ZALON=y
-CONFIG_SCSI_NCR53C8XX_SYNC=40
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=y
-CONFIG_MD_LINEAR=y
-CONFIG_MD_RAID0=y
-CONFIG_MD_RAID1=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_TULIP=y
-CONFIG_TULIP=y
-CONFIG_LASI_82596=y
-CONFIG_PPP=y
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_HIL_OLD is not set
-CONFIG_INPUT_MISC=y
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=13
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_PRINTER=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_SEQUENCER=y
-CONFIG_SND_HARMONY=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_UTF8=m
-CONFIG_HEADERS_INSTALL=y
-CONFIG_HEADERS_CHECK=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_SECURITY=y
diff --git a/arch/parisc/configs/c3000_defconfig b/arch/parisc/configs/c3000_defconfig
deleted file mode 100644
index 64d45a8b6ca0..000000000000
--- a/arch/parisc/configs/c3000_defconfig
+++ /dev/null
@@ -1,151 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_PA8X00=y
-CONFIG_PREEMPT_VOLUNTARY=y
-# CONFIG_GSC is not set
-CONFIG_PCI=y
-CONFIG_PCI_LBA=y
-# CONFIG_PDC_CHASSIS is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=m
-CONFIG_NET_KEY=m
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_DIAG is not set
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETFILTER=y
-CONFIG_NET_PKTGEN=m
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_BLK_DEV_UMEM=m
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_NS87415=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_ISCSI_ATTRS=m
-CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
-CONFIG_SCSI_DEBUG=m
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=y
-CONFIG_MD_LINEAR=y
-CONFIG_MD_RAID0=y
-CONFIG_MD_RAID1=y
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_FUSION=y
-CONFIG_FUSION_SPI=m
-CONFIG_FUSION_CTL=m
-CONFIG_NETDEVICES=y
-CONFIG_BONDING=m
-CONFIG_DUMMY=m
-CONFIG_TUN=m
-CONFIG_ACENIC=m
-CONFIG_TIGON3=m
-CONFIG_NET_TULIP=y
-CONFIG_DE2104X=m
-CONFIG_TULIP=y
-CONFIG_TULIP_MMIO=y
-CONFIG_E100=m
-CONFIG_E1000=m
-CONFIG_PPP=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPPOE=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_MOUSE_PS2 is not set
-CONFIG_SERIO=m
-CONFIG_SERIO_LIBPS2=m
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=13
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_RAW_DRIVER=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-# CONFIG_LOGO_LINUX_CLUT224 is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_SEQUENCER=y
-CONFIG_SND_AD1889=y
-CONFIG_USB_HIDDEV=y
-CONFIG_USB=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_PRINTER=m
-CONFIG_USB_STORAGE=m
-CONFIG_USB_STORAGE_USBAT=m
-CONFIG_USB_STORAGE_SDDR09=m
-CONFIG_USB_STORAGE_SDDR55=m
-CONFIG_USB_STORAGE_JUMPSHOT=m
-CONFIG_USB_MDC800=m
-CONFIG_USB_MICROTEK=m
-CONFIG_USB_LEGOTOWER=m
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_XFS_FS=m
-CONFIG_AUTOFS4_FS=y
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_UTF8=m
-CONFIG_DEBUG_FS=y
-CONFIG_HEADERS_INSTALL=y
-CONFIG_HEADERS_CHECK=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_MD5=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_HW is not set
diff --git a/arch/parisc/configs/c8000_defconfig b/arch/parisc/configs/c8000_defconfig
deleted file mode 100644
index db864b18962a..000000000000
--- a/arch/parisc/configs/c8000_defconfig
+++ /dev/null
@@ -1,234 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_CROSS_MEMORY_ATTACH is not set
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_RELAY=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_BLK_DEV_INTEGRITY=y
-CONFIG_PA8X00=y
-CONFIG_64BIT=y
-CONFIG_SMP=y
-CONFIG_PREEMPT=y
-CONFIG_IOMMU_CCIO=y
-CONFIG_PCI=y
-CONFIG_PCI_LBA=y
-# CONFIG_SUPERIO is not set
-# CONFIG_CHASSIS_LCD_LED is not set
-# CONFIG_PDC_CHASSIS is not set
-# CONFIG_PDC_CHASSIS_WARN is not set
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_BINFMT_MISC=m
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=m
-CONFIG_XFRM_SUB_POLICY=y
-CONFIG_NET_KEY=m
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_NET_IPIP=m
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_DIAG=m
-# CONFIG_IPV6 is not set
-CONFIG_IP_DCCP=m
-# CONFIG_IP_DCCP_CCID3 is not set
-CONFIG_TIPC=m
-CONFIG_LLC2=m
-CONFIG_DNS_RESOLVER=y
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-# CONFIG_STANDALONE is not set
-CONFIG_PARPORT=y
-CONFIG_PARPORT_PC=y
-CONFIG_PARPORT_PC_FIFO=y
-CONFIG_BLK_DEV_UMEM=m
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_SX8=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=6144
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_WCACHE=y
-CONFIG_ATA_OVER_ETH=m
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_PLATFORM=y
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-CONFIG_BLK_DEV_SR=m
-CONFIG_CHR_DEV_SG=y
-CONFIG_CHR_DEV_SCH=m
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_SCSI_FC_ATTRS=y
-CONFIG_SCSI_SAS_LIBSAS=m
-CONFIG_ISCSI_TCP=m
-CONFIG_ISCSI_BOOT_SYSFS=m
-CONFIG_ATA=y
-CONFIG_PATA_SIL680=y
-CONFIG_FUSION=y
-CONFIG_FUSION_SPI=y
-CONFIG_FUSION_SAS=y
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-CONFIG_NETCONSOLE=m
-CONFIG_TUN=y
-CONFIG_E1000=y
-CONFIG_PPP=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-# CONFIG_WLAN is not set
-CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_HIL_OLD is not set
-# CONFIG_KEYBOARD_HIL is not set
-# CONFIG_MOUSE_PS2 is not set
-CONFIG_INPUT_MISC=y
-CONFIG_SERIO_SERPORT=m
-CONFIG_SERIO_PARKBD=m
-CONFIG_SERIO_GSCPS2=m
-# CONFIG_HP_SDC is not set
-CONFIG_SERIO_PCIPS2=m
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SERIO_RAW=m
-CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=8
-CONFIG_SERIAL_8250_RUNTIME_UARTS=8
-CONFIG_SERIAL_8250_EXTENDED=y
-# CONFIG_SERIAL_MUX is not set
-CONFIG_SERIAL_JSM=m
-CONFIG_PRINTER=y
-CONFIG_HW_RANDOM=y
-CONFIG_RAW_DRIVER=m
-CONFIG_PTP_1588_CLOCK=y
-CONFIG_SSB=m
-CONFIG_SSB_DRIVER_PCICORE=y
-CONFIG_AGP=y
-CONFIG_AGP_PARISC=y
-CONFIG_DRM=y
-CONFIG_DRM_RADEON=y
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_FOREIGN_ENDIAN=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_TILEBLITTING=y
-# CONFIG_FB_STI is not set
-# CONFIG_LCD_CLASS_DEVICE is not set
-# CONFIG_BACKLIGHT_GENERIC is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_STI_CONSOLE is not set
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-# CONFIG_LOGO_LINUX_CLUT224 is not set
-CONFIG_SOUND=m
-CONFIG_SND=m
-CONFIG_SND_VERBOSE_PRINTK=y
-CONFIG_SND_SEQUENCER=m
-CONFIG_SND_SEQ_DUMMY=m
-CONFIG_SND_AD1889=m
-# CONFIG_SND_USB is not set
-# CONFIG_SND_GSC is not set
-CONFIG_USB=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-CONFIG_REISERFS_FS=m
-CONFIG_REISERFS_PROC_INFO=y
-CONFIG_XFS_FS=m
-CONFIG_XFS_POSIX_ACL=y
-CONFIG_QUOTA=y
-CONFIG_QFMT_V1=m
-CONFIG_QFMT_V2=m
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_XATTR=y
-CONFIG_NFS_FS=m
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-CONFIG_UNUSED_SYMBOLS=y
-CONFIG_DEBUG_FS=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_SLAB=y
-CONFIG_DEBUG_MEMORY_INIT=y
-CONFIG_DEBUG_STACKOVERFLOW=y
-CONFIG_PANIC_ON_OOPS=y
-CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_BLOCK_EXT_DEVT=y
-CONFIG_LATENCYTOP=y
-CONFIG_KEYS=y
-# CONFIG_CRYPTO_HW is not set
-CONFIG_FONTS=y
diff --git a/arch/parisc/configs/defconfig b/arch/parisc/configs/defconfig
deleted file mode 100644
index 5b877ca34ebf..000000000000
--- a/arch/parisc/configs/defconfig
+++ /dev/null
@@ -1,206 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_PA7100LC=y
-CONFIG_PREEMPT_VOLUNTARY=y
-CONFIG_IOMMU_CCIO=y
-CONFIG_GSC_LASI=y
-CONFIG_GSC_WAX=y
-CONFIG_EISA=y
-CONFIG_PCI=y
-CONFIG_GSC_DINO=y
-CONFIG_PCI_LBA=y
-CONFIG_PCCARD=y
-CONFIG_YENTA=y
-CONFIG_PD6729=y
-CONFIG_I82092=y
-CONFIG_BINFMT_MISC=m
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=m
-CONFIG_NET_KEY=m
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_DIAG=m
-CONFIG_INET6_AH=y
-CONFIG_INET6_ESP=y
-CONFIG_INET6_IPCOMP=y
-CONFIG_LLC2=m
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_PARPORT=y
-CONFIG_PARPORT_PC=m
-CONFIG_PARPORT_PC_PCMCIA=m
-CONFIG_PARPORT_1284=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=6144
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECS=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_NS87415=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_LASI700=y
-CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_SCSI_ZALON=y
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=y
-CONFIG_MD_LINEAR=y
-CONFIG_MD_RAID0=y
-CONFIG_MD_RAID1=y
-CONFIG_MD_RAID10=y
-CONFIG_BLK_DEV_DM=y
-CONFIG_NETDEVICES=y
-CONFIG_BONDING=m
-CONFIG_DUMMY=m
-CONFIG_TUN=m
-CONFIG_ACENIC=y
-CONFIG_TIGON3=y
-CONFIG_NET_TULIP=y
-CONFIG_TULIP=y
-CONFIG_LASI_82596=y
-CONFIG_PPP=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPPOE=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-# CONFIG_KEYBOARD_HIL_OLD is not set
-CONFIG_MOUSE_SERIAL=y
-CONFIG_LEGACY_PTY_COUNT=64
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_CS=y
-CONFIG_SERIAL_8250_NR_UARTS=17
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_PRINTER=m
-CONFIG_PPDEV=m
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_TILEBLITTING=y
-CONFIG_DUMMY_CONSOLE_COLUMNS=128
-CONFIG_DUMMY_CONSOLE_ROWS=48
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-# CONFIG_LOGO_LINUX_CLUT224 is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_DYNAMIC_MINORS=y
-CONFIG_SND_SEQUENCER=y
-CONFIG_SND_AD1889=y
-CONFIG_SND_HARMONY=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_NTRIG=y
-CONFIG_HID_PANTHERLORD=y
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SUNPLUS=y
-CONFIG_HID_TOPSEED=y
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_UHCI_HCD=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_VFAT_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_NFSD_V4=y
-CONFIG_CIFS=m
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=y
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=y
-CONFIG_DEBUG_FS=y
-CONFIG_HEADERS_INSTALL=y
-CONFIG_HEADERS_CHECK=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_KEYS=y
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-# CONFIG_CRYPTO_HW is not set
-CONFIG_LIBCRC32C=m
-CONFIG_FONTS=y
diff --git a/arch/parisc/configs/generic-32bit_defconfig b/arch/parisc/configs/generic-32bit_defconfig
index c7a5726728a4..61bac8ff8f22 100644
--- a/arch/parisc/configs/generic-32bit_defconfig
+++ b/arch/parisc/configs/generic-32bit_defconfig
@@ -10,23 +10,20 @@ CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
 CONFIG_PERF_EVENTS=y
 CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
 CONFIG_PA7100LC=y
 CONFIG_SMP=y
 CONFIG_HZ_100=y
 CONFIG_IOMMU_CCIO=y
 CONFIG_GSC_LASI=y
 CONFIG_GSC_WAX=y
-CONFIG_EISA=y
-CONFIG_PCI=y
 CONFIG_GSC_DINO=y
 CONFIG_PCI_LBA=y
-CONFIG_PCCARD=m
-CONFIG_YENTA=m
 # CONFIG_PDC_CHASSIS is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_UNUSED_SYMBOLS=y
+# CONFIG_BLK_DEV_BSG is not set
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_BINFMT_MISC=m
 CONFIG_NET=y
@@ -35,17 +32,15 @@ CONFIG_UNIX=y
 CONFIG_XFRM_USER=m
 CONFIG_NET_KEY=m
 CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
 CONFIG_INET_DIAG=m
 CONFIG_LLC2=m
 # CONFIG_WIRELESS is not set
+CONFIG_EISA=y
+CONFIG_PCI=y
+CONFIG_PCCARD=m
+CONFIG_YENTA=m
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_STANDALONE is not set
@@ -88,7 +83,6 @@ CONFIG_TUN=m
 # CONFIG_NET_VENDOR_ALTEON is not set
 # CONFIG_NET_VENDOR_AMD is not set
 # CONFIG_NET_VENDOR_ATHEROS is not set
-# CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
 # CONFIG_NET_VENDOR_BROCADE is not set
 # CONFIG_NET_VENDOR_CHELSIO is not set
@@ -97,8 +91,6 @@ CONFIG_NET_TULIP=y
 CONFIG_TULIP=y
 # CONFIG_NET_VENDOR_DLINK is not set
 # CONFIG_NET_VENDOR_EMULEX is not set
-# CONFIG_NET_VENDOR_EXAR is not set
-# CONFIG_NET_VENDOR_HP is not set
 CONFIG_LASI_82596=y
 # CONFIG_NET_VENDOR_MELLANOX is not set
 # CONFIG_NET_VENDOR_MICREL is not set
@@ -106,10 +98,9 @@ CONFIG_LASI_82596=y
 # CONFIG_NET_VENDOR_NATSEMI is not set
 # CONFIG_NET_VENDOR_NVIDIA is not set
 # CONFIG_NET_VENDOR_OKI is not set
-# CONFIG_NET_PACKET_ENGINE is not set
 # CONFIG_NET_VENDOR_QLOGIC is not set
-# CONFIG_NET_VENDOR_REALTEK is not set
 # CONFIG_NET_VENDOR_RDC is not set
+# CONFIG_NET_VENDOR_REALTEK is not set
 # CONFIG_NET_VENDOR_SEEQ is not set
 # CONFIG_NET_VENDOR_SILAN is not set
 # CONFIG_NET_VENDOR_SIS is not set
@@ -142,7 +133,6 @@ CONFIG_PPDEV=m
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 # CONFIG_HWMON is not set
-CONFIG_AGP=y
 CONFIG_FB=y
 CONFIG_FB_FOREIGN_ENDIAN=y
 CONFIG_FB_MODE_HELPERS=y
@@ -230,63 +220,11 @@ CONFIG_CIFS_WEAK_PW_HASH=y
 CONFIG_CIFS_XATTR=y
 CONFIG_CIFS_POSIX=y
 # CONFIG_CIFS_DEBUG is not set
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=y
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=y
-CONFIG_UNUSED_SYMBOLS=y
-CONFIG_DEBUG_FS=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_MEMORY_INIT=y
-CONFIG_DEBUG_STACKOVERFLOW=y
-CONFIG_DEBUG_SHIRQ=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_LATENCYTOP=y
-CONFIG_LKDTM=m
-CONFIG_KEYS=y
 CONFIG_CRYPTO_TEST=m
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_ANUBIS=m
@@ -302,3 +240,14 @@ CONFIG_CRYPTO_DEFLATE=y
 CONFIG_CRC_CCITT=m
 CONFIG_CRC_T10DIF=y
 CONFIG_FONTS=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_DEBUG_STACKOVERFLOW=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_LATENCYTOP=y
+CONFIG_LKDTM=m
diff --git a/arch/parisc/configs/generic-64bit_defconfig b/arch/parisc/configs/generic-64bit_defconfig
index d39e7f821aba..59561e04e659 100644
--- a/arch/parisc/configs/generic-64bit_defconfig
+++ b/arch/parisc/configs/generic-64bit_defconfig
@@ -17,27 +17,24 @@ CONFIG_RELAY=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 # CONFIG_COMPAT_BRK is not set
-CONFIG_MODULES=y
-CONFIG_MODULE_FORCE_LOAD=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_BLK_DEV_INTEGRITY=y
-# CONFIG_IOSCHED_DEADLINE is not set
 CONFIG_PA8X00=y
 CONFIG_64BIT=y
 CONFIG_SMP=y
-# CONFIG_COMPACTION is not set
 CONFIG_HPPB=y
 CONFIG_IOMMU_CCIO=y
 CONFIG_GSC_LASI=y
 CONFIG_GSC_WAX=y
-CONFIG_PCI=y
-CONFIG_PCI_STUB=m
-CONFIG_PCI_IOV=y
 CONFIG_GSC_DINO=y
 CONFIG_PCI_LBA=y
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_BLK_DEV_INTEGRITY=y
 CONFIG_BINFMT_MISC=m
+# CONFIG_COMPACTION is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -47,18 +44,17 @@ CONFIG_XFRM_MIGRATE=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
 CONFIG_INET_DIAG=m
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_ADVANCED is not set
 CONFIG_NETFILTER_NETLINK_LOG=y
 CONFIG_DCB=y
 # CONFIG_WIRELESS is not set
+CONFIG_PCI=y
+CONFIG_PCI_STUB=m
+CONFIG_PCI_IOV=y
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_BLK_DEV_LOOP=y
@@ -102,7 +98,6 @@ CONFIG_TUN=y
 # CONFIG_NET_VENDOR_ALTEON is not set
 # CONFIG_NET_VENDOR_AMD is not set
 # CONFIG_NET_VENDOR_ATHEROS is not set
-# CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
 # CONFIG_NET_VENDOR_BROCADE is not set
 # CONFIG_NET_VENDOR_CHELSIO is not set
@@ -111,10 +106,8 @@ CONFIG_NET_TULIP=y
 CONFIG_TULIP=y
 # CONFIG_NET_VENDOR_DLINK is not set
 # CONFIG_NET_VENDOR_EMULEX is not set
-# CONFIG_NET_VENDOR_EXAR is not set
-CONFIG_HP100=m
-CONFIG_E1000=y
 CONFIG_LASI_82596=y
+CONFIG_E1000=y
 # CONFIG_NET_VENDOR_MARVELL is not set
 # CONFIG_NET_VENDOR_MELLANOX is not set
 # CONFIG_NET_VENDOR_MICREL is not set
@@ -124,9 +117,8 @@ CONFIG_LASI_82596=y
 # CONFIG_NET_VENDOR_OKI is not set
 CONFIG_QLA3XXX=m
 CONFIG_QLCNIC=m
-CONFIG_QLGE=m
-# CONFIG_NET_VENDOR_REALTEK is not set
 # CONFIG_NET_VENDOR_RDC is not set
+# CONFIG_NET_VENDOR_REALTEK is not set
 # CONFIG_NET_VENDOR_SEEQ is not set
 # CONFIG_NET_VENDOR_SILAN is not set
 # CONFIG_NET_VENDOR_SIS is not set
@@ -153,9 +145,6 @@ CONFIG_SMSC_PHY=m
 CONFIG_STE10XP=m
 CONFIG_VITESSE_PHY=m
 CONFIG_SLIP=m
-CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLIP_SMART=y
-CONFIG_SLIP_MODE_SLIP6=y
 # CONFIG_WLAN is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_KEYBOARD_HIL_OLD is not set
@@ -208,34 +197,18 @@ CONFIG_FIRMWARE_EDID=y
 CONFIG_FB_MODE_HELPERS=y
 # CONFIG_BACKLIGHT_GENERIC is not set
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
 CONFIG_HIDRAW=y
 CONFIG_HID_PID=y
 CONFIG_USB_HIDDEV=y
 CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_DYNAMIC_MINORS=y
-CONFIG_USB_MON=m
-CONFIG_USB_WUSB_CBAF=m
-CONFIG_USB_XHCI_HCD=m
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_ONESHOT=y
-CONFIG_LEDS_TRIGGER_DISK=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-CONFIG_LEDS_TRIGGER_BACKLIGHT=m
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
 CONFIG_UIO=y
 CONFIG_UIO_PDRV_GENIRQ=m
 CONFIG_UIO_AEC=m
 CONFIG_UIO_SERCOS3=m
 CONFIG_UIO_PCI_GENERIC=m
 CONFIG_STAGING=y
+CONFIG_QLGE=m
+CONFIG_HP100=m
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_SECURITY=y
@@ -272,14 +245,6 @@ CONFIG_NLS_ASCII=m
 CONFIG_NLS_ISO8859_1=m
 CONFIG_NLS_ISO8859_2=m
 CONFIG_NLS_UTF8=m
-CONFIG_PRINTK_TIME=y
-CONFIG_STRIP_ASM_SYMS=y
-CONFIG_UNUSED_SYMBOLS=y
-CONFIG_DEBUG_FS=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_STACKOVERFLOW=y
-# CONFIG_SCHED_DEBUG is not set
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_PCBC=m
@@ -292,3 +257,10 @@ CONFIG_CRYPTO_DEFLATE=m
 # CONFIG_CRYPTO_HW is not set
 CONFIG_CRC_CCITT=m
 CONFIG_LIBCRC32C=y
+CONFIG_PRINTK_TIME=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_STACKOVERFLOW=y
+# CONFIG_SCHED_DEBUG is not set
diff --git a/arch/parisc/include/asm/compat.h b/arch/parisc/include/asm/compat.h
index e03e3c849f40..2f4f66a3bac0 100644
--- a/arch/parisc/include/asm/compat.h
+++ b/arch/parisc/include/asm/compat.h
@@ -173,23 +173,6 @@ struct compat_shmid64_ds {
 #define COMPAT_ELF_NGREG 80
 typedef compat_ulong_t compat_elf_gregset_t[COMPAT_ELF_NGREG];
 
-/*
- * A pointer passed in from user mode. This should not
- * be used for syscall parameters, just declare them
- * as pointers because the syscall entry code will have
- * appropriately converted them already.
- */
-
-static inline void __user *compat_ptr(compat_uptr_t uptr)
-{
-	return (void __user *)(unsigned long)uptr;
-}
-
-static inline compat_uptr_t ptr_to_compat(void __user *uptr)
-{
-	return (u32)(unsigned long)uptr;
-}
-
 static __inline__ void __user *arch_compat_alloc_user_space(long len)
 {
 	struct pt_regs *regs = &current->thread.regs;
diff --git a/arch/parisc/kernel/setup.c b/arch/parisc/kernel/setup.c
index 53a21ce927de..e320bae501d3 100644
--- a/arch/parisc/kernel/setup.c
+++ b/arch/parisc/kernel/setup.c
@@ -151,10 +151,6 @@ void __init setup_arch(char **cmdline_p)
 	dma_ops_init();
 #endif
 
-#if defined(CONFIG_VT) && defined(CONFIG_DUMMY_CONSOLE)
-	conswitchp = &dummy_con;	/* we use do_take_over_console() later ! */
-#endif
-
 	clear_sched_clock_stable();
 }
 
diff --git a/arch/parisc/kernel/syscalls/syscall.tbl b/arch/parisc/kernel/syscalls/syscall.tbl
index 285ff516150c..52a15f5cd130 100644
--- a/arch/parisc/kernel/syscalls/syscall.tbl
+++ b/arch/parisc/kernel/syscalls/syscall.tbl
@@ -433,3 +433,5 @@
 433	common	fspick				sys_fspick
 434	common	pidfd_open			sys_pidfd_open
 435	common	clone3				sys_clone3_wrapper
+437	common	openat2				sys_openat2
+438	common	pidfd_getfd			sys_pidfd_getfd
diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c
index 354cf060b67f..5224fb38d766 100644
--- a/arch/parisc/mm/init.c
+++ b/arch/parisc/mm/init.c
@@ -351,7 +351,6 @@ static void __init map_pages(unsigned long start_vaddr,
 			     unsigned long start_paddr, unsigned long size,
 			     pgprot_t pgprot, int force)
 {
-	pgd_t *pg_dir;
 	pmd_t *pmd;
 	pte_t *pg_table;
 	unsigned long end_paddr;
@@ -372,62 +371,37 @@ static void __init map_pages(unsigned long start_vaddr,
 
 	end_paddr = start_paddr + size;
 
-	pg_dir = pgd_offset_k(start_vaddr);
-
-#if PTRS_PER_PMD == 1
-	start_pmd = 0;
-#else
+	/* for 2-level configuration PTRS_PER_PMD is 0 so start_pmd will be 0 */
 	start_pmd = ((start_vaddr >> PMD_SHIFT) & (PTRS_PER_PMD - 1));
-#endif
 	start_pte = ((start_vaddr >> PAGE_SHIFT) & (PTRS_PER_PTE - 1));
 
 	address = start_paddr;
 	vaddr = start_vaddr;
 	while (address < end_paddr) {
-#if PTRS_PER_PMD == 1
-		pmd = (pmd_t *)__pa(pg_dir);
-#else
-		pmd = (pmd_t *)pgd_address(*pg_dir);
-
-		/*
-		 * pmd is physical at this point
-		 */
+		pgd_t *pgd = pgd_offset_k(vaddr);
+		p4d_t *p4d = p4d_offset(pgd, vaddr);
+		pud_t *pud = pud_offset(p4d, vaddr);
 
-		if (!pmd) {
+#if CONFIG_PGTABLE_LEVELS == 3
+		if (pud_none(*pud)) {
 			pmd = memblock_alloc(PAGE_SIZE << PMD_ORDER,
 					     PAGE_SIZE << PMD_ORDER);
 			if (!pmd)
 				panic("pmd allocation failed.\n");
-			pmd = (pmd_t *) __pa(pmd);
+			pud_populate(NULL, pud, pmd);
 		}
-
-		pud_populate(NULL, (pud_t *)pg_dir, __va(pmd));
 #endif
-		pg_dir++;
-
-		/* now change pmd to kernel virtual addresses */
 
-		pmd = (pmd_t *)__va(pmd) + start_pmd;
+		pmd = pmd_offset(pud, vaddr);
 		for (tmp1 = start_pmd; tmp1 < PTRS_PER_PMD; tmp1++, pmd++) {
-
-			/*
-			 * pg_table is physical at this point
-			 */
-
-			pg_table = (pte_t *)pmd_address(*pmd);
-			if (!pg_table) {
-				pg_table = memblock_alloc(PAGE_SIZE,
-							  PAGE_SIZE);
+			if (pmd_none(*pmd)) {
+				pg_table = memblock_alloc(PAGE_SIZE, PAGE_SIZE);
 				if (!pg_table)
 					panic("page table allocation failed\n");
-				pg_table = (pte_t *) __pa(pg_table);
+				pmd_populate_kernel(NULL, pmd, pg_table);
 			}
 
-			pmd_populate_kernel(NULL, pmd, __va(pg_table));
-
-			/* now change pg_table to kernel virtual addresses */
-
-			pg_table = (pte_t *) __va(pg_table) + start_pte;
+			pg_table = pte_offset_kernel(pmd, vaddr);
 			for (tmp2 = start_pte; tmp2 < PTRS_PER_PTE; tmp2++, pg_table++) {
 				pte_t pte;
 				pgprot_t prot;
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index e7c607059f54..497b7d0b2d7e 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -1,10 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
 source "arch/powerpc/platforms/Kconfig.cputype"
 
-config PPC32
-	bool
-	default y if !PPC64
-
 config 32BIT
 	bool
 	default y if PPC32
@@ -133,7 +129,7 @@ config PPC
 	select ARCH_HAS_PTE_SPECIAL
 	select ARCH_HAS_MEMBARRIER_CALLBACKS
 	select ARCH_HAS_SCALED_CPUTIME		if VIRT_CPU_ACCOUNTING_NATIVE && PPC_BOOK3S_64
-	select ARCH_HAS_STRICT_KERNEL_RWX	if ((PPC_BOOK3S_64 || PPC32) && !RELOCATABLE && !HIBERNATION)
+	select ARCH_HAS_STRICT_KERNEL_RWX	if ((PPC_BOOK3S_64 || PPC32) && !HIBERNATION)
 	select ARCH_HAS_TICK_BROADCAST		if GENERIC_CLOCKEVENTS_BROADCAST
 	select ARCH_HAS_UACCESS_FLUSHCACHE
 	select ARCH_HAS_UACCESS_MCSAFE		if PPC64
@@ -173,6 +169,7 @@ config PPC
 	select HAVE_ARCH_HUGE_VMAP		if PPC_BOOK3S_64 && PPC_RADIX_MMU
 	select HAVE_ARCH_JUMP_LABEL
 	select HAVE_ARCH_KASAN			if PPC32
+	select HAVE_ARCH_KASAN_VMALLOC		if PPC32
 	select HAVE_ARCH_KGDB
 	select HAVE_ARCH_MMAP_RND_BITS
 	select HAVE_ARCH_MMAP_RND_COMPAT_BITS	if COMPAT
@@ -222,9 +219,8 @@ config PPC
 	select HAVE_HARDLOCKUP_DETECTOR_PERF	if PERF_EVENTS && HAVE_PERF_EVENTS_NMI && !HAVE_HARDLOCKUP_DETECTOR_ARCH
 	select HAVE_PERF_REGS
 	select HAVE_PERF_USER_STACK_DUMP
-	select HAVE_RCU_TABLE_FREE		if SMP
-	select HAVE_RCU_TABLE_NO_INVALIDATE	if HAVE_RCU_TABLE_FREE
-	select HAVE_MMU_GATHER_PAGE_SIZE
+	select MMU_GATHER_RCU_TABLE_FREE
+	select MMU_GATHER_PAGE_SIZE
 	select HAVE_REGS_AND_STACK_ACCESS_API
 	select HAVE_RELIABLE_STACKTRACE		if PPC_BOOK3S_64 && CPU_LITTLE_ENDIAN
 	select HAVE_SYSCALL_TRACEPOINTS
@@ -238,6 +234,7 @@ config PPC
 	select NEED_DMA_MAP_STATE		if PPC64 || NOT_COHERENT_CACHE
 	select NEED_SG_DMA_LENGTH
 	select OF
+	select OF_DMA_DEFAULT_COHERENT		if !NOT_COHERENT_CACHE
 	select OF_EARLY_FLATTREE
 	select OLD_SIGACTION			if PPC32
 	select OLD_SIGSUSPEND
@@ -482,7 +479,7 @@ config MPROFILE_KERNEL
 config HOTPLUG_CPU
 	bool "Support for enabling/disabling CPUs"
 	depends on SMP && (PPC_PSERIES || \
-	PPC_PMAC || PPC_POWERNV || FSL_SOC_BOOKE)
+		PPC_PMAC || PPC_POWERNV || FSL_SOC_BOOKE)
 	help
 	  Say Y here to be able to disable and re-enable individual
 	  CPUs at runtime on SMP machines.
diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug
index 4e1d39847462..0b063830eea8 100644
--- a/arch/powerpc/Kconfig.debug
+++ b/arch/powerpc/Kconfig.debug
@@ -371,7 +371,7 @@ config PPC_PTDUMP
 
 config PPC_DEBUG_WX
 	bool "Warn on W+X mappings at boot"
-	depends on PPC_PTDUMP
+	depends on PPC_PTDUMP && STRICT_KERNEL_RWX
 	help
 	  Generate a warning if any W+X mappings are found at boot.
 
diff --git a/arch/powerpc/Makefile.postlink b/arch/powerpc/Makefile.postlink
index 134f12f89b92..2268396ff4bb 100644
--- a/arch/powerpc/Makefile.postlink
+++ b/arch/powerpc/Makefile.postlink
@@ -17,11 +17,11 @@ quiet_cmd_head_check = CHKHEAD $@
 quiet_cmd_relocs_check = CHKREL  $@
 ifdef CONFIG_PPC_BOOK3S_64
       cmd_relocs_check =						\
-	$(CONFIG_SHELL) $(srctree)/arch/powerpc/tools/relocs_check.sh "$(OBJDUMP)" "$@" ; \
+	$(CONFIG_SHELL) $(srctree)/arch/powerpc/tools/relocs_check.sh "$(OBJDUMP)" "$(NM)" "$@" ; \
 	$(BASH) $(srctree)/arch/powerpc/tools/unrel_branch_check.sh "$(OBJDUMP)" "$@"
 else
       cmd_relocs_check =						\
-	$(CONFIG_SHELL) $(srctree)/arch/powerpc/tools/relocs_check.sh "$(OBJDUMP)" "$@"
+	$(CONFIG_SHELL) $(srctree)/arch/powerpc/tools/relocs_check.sh "$(OBJDUMP)" "$(NM)" "$@"
 endif
 
 # `@true` prevents complaint when there is nothing to be done
diff --git a/arch/powerpc/boot/4xx.c b/arch/powerpc/boot/4xx.c
index 1699e9531552..00c4d843a023 100644
--- a/arch/powerpc/boot/4xx.c
+++ b/arch/powerpc/boot/4xx.c
@@ -228,7 +228,7 @@ void ibm4xx_denali_fixup_memsize(void)
 		dpath = 8; /* 64 bits */
 
 	/* get address pins (rows) */
- 	val = SDRAM0_READ(DDR0_42);
+	val = SDRAM0_READ(DDR0_42);
 
 	row = DDR_GET_VAL(val, DDR_APIN, DDR_APIN_SHIFT);
 	if (row > max_row)
diff --git a/arch/powerpc/boot/dts/mgcoge.dts b/arch/powerpc/boot/dts/mgcoge.dts
index a2dd5f1da621..7de068991bde 100644
--- a/arch/powerpc/boot/dts/mgcoge.dts
+++ b/arch/powerpc/boot/dts/mgcoge.dts
@@ -224,7 +224,7 @@
 				reg = <0x11a80 0x40 0x89fc 0x2>;
 				interrupts = <2 8>;
 				interrupt-parent = <&PIC>;
-				gpios = < &cpm2_pio_d 19 0>;
+				cs-gpios = < &cpm2_pio_d 19 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				ds3106@1 {
diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts
index b6257186528e..ecebc27a2898 100644
--- a/arch/powerpc/boot/dts/mpc832x_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts
@@ -249,7 +249,7 @@
 			reg = <0x4c0 0x40>;
 			interrupts = <2>;
 			interrupt-parent = <&qeic>;
-			gpios = <&qe_pio_d 13 0>;
+			cs-gpios = <&qe_pio_d 13 0>;
 			mode = "cpu-qe";
 
 			mmc-slot@0 {
diff --git a/arch/powerpc/boot/dts/mpc8610_hpcd.dts b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
index 1a8321ac105a..33bbe58c1ad0 100644
--- a/arch/powerpc/boot/dts/mpc8610_hpcd.dts
+++ b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
@@ -200,7 +200,7 @@
 			interrupts = <59 2>;
 			interrupt-parent = <&mpic>;
 			mode = "cpu";
-			gpios = <&sdcsr_pio 7 0>;
+			cs-gpios = <&sdcsr_pio 7 0>;
 			sleep = <&pmc 0x00000800 0>;
 
 			mmc-slot@0 {
diff --git a/arch/powerpc/configs/44x/akebono_defconfig b/arch/powerpc/configs/44x/akebono_defconfig
index f0c8a07cc274..7705a5c3f4ea 100644
--- a/arch/powerpc/configs/44x/akebono_defconfig
+++ b/arch/powerpc/configs/44x/akebono_defconfig
@@ -59,7 +59,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_NET_VENDOR_DLINK is not set
 # CONFIG_NET_VENDOR_EMULEX is not set
 # CONFIG_NET_VENDOR_EXAR is not set
-# CONFIG_NET_VENDOR_HP is not set
 CONFIG_IBM_EMAC=y
 # CONFIG_NET_VENDOR_MARVELL is not set
 # CONFIG_NET_VENDOR_MELLANOX is not set
diff --git a/arch/powerpc/configs/44x/sam440ep_defconfig b/arch/powerpc/configs/44x/sam440ep_defconfig
index ed02f12dbd54..22dc0dadf576 100644
--- a/arch/powerpc/configs/44x/sam440ep_defconfig
+++ b/arch/powerpc/configs/44x/sam440ep_defconfig
@@ -10,8 +10,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_AMIGA_PARTITION=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
 # CONFIG_EBONY is not set
 CONFIG_SAM440EP=y
 CONFIG_CMDLINE_BOOL=y
diff --git a/arch/powerpc/configs/52xx/pcm030_defconfig b/arch/powerpc/configs/52xx/pcm030_defconfig
index fdb11daeb688..789622ffd844 100644
--- a/arch/powerpc/configs/52xx/pcm030_defconfig
+++ b/arch/powerpc/configs/52xx/pcm030_defconfig
@@ -14,8 +14,6 @@ CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
 # CONFIG_PPC_CHRP is not set
 CONFIG_PPC_MPC52xx=y
 CONFIG_PPC_MPC5200_SIMPLE=y
diff --git a/arch/powerpc/configs/83xx/kmeter1_defconfig b/arch/powerpc/configs/83xx/kmeter1_defconfig
index 648c6b3dccf9..24bf1bde1bb4 100644
--- a/arch/powerpc/configs/83xx/kmeter1_defconfig
+++ b/arch/powerpc/configs/83xx/kmeter1_defconfig
@@ -11,8 +11,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_PARTITION_ADVANCED=y
 # CONFIG_MSDOS_PARTITION is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
 # CONFIG_PPC_CHRP is not set
 # CONFIG_PPC_PMAC is not set
 CONFIG_PPC_83xx=y
diff --git a/arch/powerpc/configs/adder875_defconfig b/arch/powerpc/configs/adder875_defconfig
index 510f7fd1f6a3..f55e23cb176c 100644
--- a/arch/powerpc/configs/adder875_defconfig
+++ b/arch/powerpc/configs/adder875_defconfig
@@ -9,7 +9,6 @@ CONFIG_EXPERT=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_IOSCHED_CFQ is not set
 CONFIG_PPC_ADDER875=y
 CONFIG_8xx_COPYBACK=y
 CONFIG_GEN_RTC=y
diff --git a/arch/powerpc/configs/ep8248e_defconfig b/arch/powerpc/configs/ep8248e_defconfig
index 6e08d9502d89..00d69965f898 100644
--- a/arch/powerpc/configs/ep8248e_defconfig
+++ b/arch/powerpc/configs/ep8248e_defconfig
@@ -6,7 +6,6 @@ CONFIG_EXPERT=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_SLAB=y
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_IOSCHED_CFQ is not set
 # CONFIG_PPC_CHRP is not set
 # CONFIG_PPC_PMAC is not set
 CONFIG_PPC_82xx=y
diff --git a/arch/powerpc/configs/ep88xc_defconfig b/arch/powerpc/configs/ep88xc_defconfig
index 9c1bf60f1e19..0e2e5e81a359 100644
--- a/arch/powerpc/configs/ep88xc_defconfig
+++ b/arch/powerpc/configs/ep88xc_defconfig
@@ -11,7 +11,6 @@ CONFIG_EXPERT=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_IOSCHED_CFQ is not set
 CONFIG_PPC_EP88XC=y
 CONFIG_8xx_COPYBACK=y
 CONFIG_GEN_RTC=y
diff --git a/arch/powerpc/configs/guest.config b/arch/powerpc/configs/guest.config
index 8b8cd18ecd7c..209f58515d88 100644
--- a/arch/powerpc/configs/guest.config
+++ b/arch/powerpc/configs/guest.config
@@ -1,5 +1,4 @@
 CONFIG_VIRTIO_BLK=y
-CONFIG_VIRTIO_BLK_SCSI=y
 CONFIG_SCSI_VIRTIO=y
 CONFIG_VIRTIO_NET=y
 CONFIG_NET_FAILOVER=y
diff --git a/arch/powerpc/configs/mgcoge_defconfig b/arch/powerpc/configs/mgcoge_defconfig
index 6ce4f206eac7..dcc8dccf54f3 100644
--- a/arch/powerpc/configs/mgcoge_defconfig
+++ b/arch/powerpc/configs/mgcoge_defconfig
@@ -12,7 +12,6 @@ CONFIG_KALLSYMS_ALL=y
 CONFIG_EMBEDDED=y
 CONFIG_SLAB=y
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_IOSCHED_CFQ is not set
 # CONFIG_PPC_PMAC is not set
 CONFIG_PPC_82xx=y
 CONFIG_MGCOGE=y
diff --git a/arch/powerpc/configs/mpc512x_defconfig b/arch/powerpc/configs/mpc512x_defconfig
index 1f3a045ab081..e39346b3dc3b 100644
--- a/arch/powerpc/configs/mpc512x_defconfig
+++ b/arch/powerpc/configs/mpc512x_defconfig
@@ -9,7 +9,6 @@ CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_IOSCHED_CFQ is not set
 # CONFIG_PPC_CHRP is not set
 CONFIG_PPC_MPC512x=y
 CONFIG_MPC512x_LPBFIFO=y
diff --git a/arch/powerpc/configs/mpc885_ads_defconfig b/arch/powerpc/configs/mpc885_ads_defconfig
index 0327a329316f..82a008c04eae 100644
--- a/arch/powerpc/configs/mpc885_ads_defconfig
+++ b/arch/powerpc/configs/mpc885_ads_defconfig
@@ -11,7 +11,6 @@ CONFIG_EXPERT=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_IOSCHED_CFQ is not set
 CONFIG_8xx_COPYBACK=y
 CONFIG_GEN_RTC=y
 CONFIG_HZ_100=y
diff --git a/arch/powerpc/configs/powernv_defconfig b/arch/powerpc/configs/powernv_defconfig
index 32841456a573..71749377d164 100644
--- a/arch/powerpc/configs/powernv_defconfig
+++ b/arch/powerpc/configs/powernv_defconfig
@@ -181,7 +181,6 @@ CONFIG_MLX5_FPGA=y
 CONFIG_MLX5_CORE_EN=y
 CONFIG_MLX5_CORE_IPOIB=y
 CONFIG_MYRI10GE=m
-CONFIG_QLGE=m
 CONFIG_NETXEN_NIC=m
 CONFIG_USB_NET_DRIVERS=m
 # CONFIG_WLAN is not set
diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig
index b250e6f5a7ca..7e68cb222c7b 100644
--- a/arch/powerpc/configs/ppc64_defconfig
+++ b/arch/powerpc/configs/ppc64_defconfig
@@ -189,7 +189,6 @@ CONFIG_MLX4_EN=m
 CONFIG_MYRI10GE=m
 CONFIG_S2IO=m
 CONFIG_PASEMI_MAC=y
-CONFIG_QLGE=m
 CONFIG_NETXEN_NIC=m
 CONFIG_SUNGEM=y
 CONFIG_GELIC_NET=m
diff --git a/arch/powerpc/configs/ppc6xx_defconfig b/arch/powerpc/configs/ppc6xx_defconfig
index 7e28919041cf..3e2f44f38ac5 100644
--- a/arch/powerpc/configs/ppc6xx_defconfig
+++ b/arch/powerpc/configs/ppc6xx_defconfig
@@ -507,7 +507,6 @@ CONFIG_FORCEDETH=m
 CONFIG_HAMACHI=m
 CONFIG_YELLOWFIN=m
 CONFIG_QLA3XXX=m
-CONFIG_QLGE=m
 CONFIG_NETXEN_NIC=m
 CONFIG_8139CP=m
 CONFIG_8139TOO=m
diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig
index 26126b4d4de3..6b68109e248f 100644
--- a/arch/powerpc/configs/pseries_defconfig
+++ b/arch/powerpc/configs/pseries_defconfig
@@ -169,7 +169,6 @@ CONFIG_IXGBE=m
 CONFIG_I40E=m
 CONFIG_MLX4_EN=m
 CONFIG_MYRI10GE=m
-CONFIG_QLGE=m
 CONFIG_NETXEN_NIC=m
 CONFIG_PPP=m
 CONFIG_PPP_BSDCOMP=m
diff --git a/arch/powerpc/configs/skiroot_defconfig b/arch/powerpc/configs/skiroot_defconfig
index 069f67f12731..1b6bdad36b13 100644
--- a/arch/powerpc/configs/skiroot_defconfig
+++ b/arch/powerpc/configs/skiroot_defconfig
@@ -1,8 +1,3 @@
-CONFIG_PPC64=y
-CONFIG_ALTIVEC=y
-CONFIG_VSX=y
-CONFIG_NR_CPUS=2048
-CONFIG_CPU_LITTLE_ENDIAN=y
 CONFIG_KERNEL_XZ=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
@@ -28,17 +23,15 @@ CONFIG_EXPERT=y
 # CONFIG_AIO is not set
 CONFIG_PERF_EVENTS=y
 # CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB_MERGE_DEFAULT is not set
+CONFIG_SLAB_FREELIST_RANDOM=y
 CONFIG_SLAB_FREELIST_HARDENED=y
-CONFIG_JUMP_LABEL=y
-CONFIG_STRICT_KERNEL_RWX=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_SIG=y
-CONFIG_MODULE_SIG_FORCE=y
-CONFIG_MODULE_SIG_SHA512=y
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_MQ_IOSCHED_DEADLINE is not set
-# CONFIG_MQ_IOSCHED_KYBER is not set
+CONFIG_PPC64=y
+CONFIG_ALTIVEC=y
+CONFIG_VSX=y
+CONFIG_NR_CPUS=2048
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_PANIC_TIMEOUT=30
 # CONFIG_PPC_VAS is not set
 # CONFIG_PPC_PSERIES is not set
 # CONFIG_PPC_OF_BOOT_TRAMPOLINE is not set
@@ -46,17 +39,27 @@ CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_IDLE=y
 CONFIG_HZ_100=y
 CONFIG_KEXEC=y
+CONFIG_KEXEC_FILE=y
 CONFIG_PRESERVE_FA_DUMP=y
 CONFIG_IRQ_ALL_CPUS=y
 CONFIG_NUMA=y
-# CONFIG_COMPACTION is not set
-# CONFIG_MIGRATION is not set
 CONFIG_PPC_64K_PAGES=y
 CONFIG_SCHED_SMT=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=tty0 console=hvc0 ipr.fast_reboot=1 quiet"
 # CONFIG_SECCOMP is not set
 # CONFIG_PPC_MEM_KEYS is not set
+CONFIG_JUMP_LABEL=y
+CONFIG_STRICT_KERNEL_RWX=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_SIG_FORCE=y
+CONFIG_MODULE_SIG_SHA512=y
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_MQ_IOSCHED_DEADLINE is not set
+# CONFIG_MQ_IOSCHED_KYBER is not set
+# CONFIG_COMPACTION is not set
+# CONFIG_MIGRATION is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -138,7 +141,6 @@ CONFIG_TIGON3=m
 CONFIG_BNX2X=m
 # CONFIG_NET_VENDOR_BROCADE is not set
 # CONFIG_NET_VENDOR_CADENCE is not set
-# CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_CAVIUM is not set
 CONFIG_CHELSIO_T1=m
 # CONFIG_NET_VENDOR_CISCO is not set
@@ -147,7 +149,6 @@ CONFIG_CHELSIO_T1=m
 # CONFIG_NET_VENDOR_DLINK is not set
 CONFIG_BE2NET=m
 # CONFIG_NET_VENDOR_EZCHIP is not set
-# CONFIG_NET_VENDOR_HP is not set
 # CONFIG_NET_VENDOR_HUAWEI is not set
 CONFIG_E1000=m
 CONFIG_E1000E=m
@@ -155,7 +156,6 @@ CONFIG_IGB=m
 CONFIG_IXGB=m
 CONFIG_IXGBE=m
 CONFIG_I40E=m
-CONFIG_S2IO=m
 # CONFIG_NET_VENDOR_MARVELL is not set
 CONFIG_MLX4_EN=m
 # CONFIG_MLX4_CORE_GEN2 is not set
@@ -166,12 +166,12 @@ CONFIG_MLX5_CORE_EN=y
 # CONFIG_NET_VENDOR_MICROSEMI is not set
 CONFIG_MYRI10GE=m
 # CONFIG_NET_VENDOR_NATSEMI is not set
+CONFIG_S2IO=m
 # CONFIG_NET_VENDOR_NETRONOME is not set
 # CONFIG_NET_VENDOR_NI is not set
 # CONFIG_NET_VENDOR_NVIDIA is not set
 # CONFIG_NET_VENDOR_OKI is not set
 # CONFIG_NET_VENDOR_PACKET_ENGINES is not set
-CONFIG_QLGE=m
 CONFIG_NETXEN_NIC=m
 CONFIG_QED=m
 CONFIG_QEDE=m
@@ -238,7 +238,6 @@ CONFIG_HID_CYPRESS=y
 CONFIG_HID_EZKEY=y
 CONFIG_HID_ITE=y
 CONFIG_HID_KENSINGTON=y
-CONFIG_HID_LOGITECH=y
 CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
 CONFIG_USB_HIDDEV=y
@@ -275,6 +274,18 @@ CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_UTF8=y
+CONFIG_ENCRYPTED_KEYS=y
+CONFIG_SECURITY=y
+CONFIG_HARDENED_USERCOPY=y
+# CONFIG_HARDENED_USERCOPY_FALLBACK is not set
+CONFIG_HARDENED_USERCOPY_PAGESPAN=y
+CONFIG_FORTIFY_SOURCE=y
+CONFIG_SECURITY_LOCKDOWN_LSM=y
+CONFIG_SECURITY_LOCKDOWN_LSM_EARLY=y
+CONFIG_LOCK_DOWN_KERNEL_FORCE_INTEGRITY=y
+# CONFIG_INTEGRITY is not set
+CONFIG_LSM="yama,loadpin,safesetid,integrity"
+# CONFIG_CRYPTO_HW is not set
 CONFIG_CRC16=y
 CONFIG_CRC_ITU_T=y
 CONFIG_LIBCRC32C=y
@@ -285,17 +296,20 @@ CONFIG_LIBCRC32C=y
 # CONFIG_XZ_DEC_SPARC is not set
 CONFIG_PRINTK_TIME=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_SLUB_DEBUG_ON=y
+CONFIG_SCHED_STACK_END_CHECK=y
 CONFIG_DEBUG_STACKOVERFLOW=y
+CONFIG_PANIC_ON_OOPS=y
 CONFIG_SOFTLOCKUP_DETECTOR=y
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
 CONFIG_HARDLOCKUP_DETECTOR=y
 CONFIG_BOOTPARAM_HARDLOCKUP_PANIC=y
 CONFIG_WQ_WATCHDOG=y
 # CONFIG_SCHED_DEBUG is not set
+CONFIG_DEBUG_SG=y
+CONFIG_DEBUG_NOTIFIERS=y
+CONFIG_BUG_ON_DATA_CORRUPTION=y
+CONFIG_DEBUG_CREDENTIALS=y
 # CONFIG_FTRACE is not set
-# CONFIG_RUNTIME_TESTING_MENU is not set
 CONFIG_XMON=y
-CONFIG_XMON_DEFAULT=y
-CONFIG_ENCRYPTED_KEYS=y
-# CONFIG_CRYPTO_ECHAINIV is not set
-# CONFIG_CRYPTO_HW is not set
+# CONFIG_RUNTIME_TESTING_MENU is not set
diff --git a/arch/powerpc/configs/storcenter_defconfig b/arch/powerpc/configs/storcenter_defconfig
index 29b19ec7e5d7..b964084e4056 100644
--- a/arch/powerpc/configs/storcenter_defconfig
+++ b/arch/powerpc/configs/storcenter_defconfig
@@ -77,5 +77,4 @@ CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_UTF8=y
 CONFIG_CRC_T10DIF=y
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
diff --git a/arch/powerpc/configs/tqm8xx_defconfig b/arch/powerpc/configs/tqm8xx_defconfig
index ffed2b4256d6..eda8bfb2d0a3 100644
--- a/arch/powerpc/configs/tqm8xx_defconfig
+++ b/arch/powerpc/configs/tqm8xx_defconfig
@@ -14,7 +14,6 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_IOSCHED_CFQ is not set
 CONFIG_TQM8XX=y
 CONFIG_8xx_COPYBACK=y
 # CONFIG_8xx_CPU15 is not set
diff --git a/arch/powerpc/include/asm/archrandom.h b/arch/powerpc/include/asm/archrandom.h
index a09595f00cab..9a53e29680f4 100644
--- a/arch/powerpc/include/asm/archrandom.h
+++ b/arch/powerpc/include/asm/archrandom.h
@@ -6,27 +6,28 @@
 
 #include <asm/machdep.h>
 
-static inline int arch_get_random_long(unsigned long *v)
+static inline bool __must_check arch_get_random_long(unsigned long *v)
 {
-	return 0;
+	return false;
 }
 
-static inline int arch_get_random_int(unsigned int *v)
+static inline bool __must_check arch_get_random_int(unsigned int *v)
 {
-	return 0;
+	return false;
 }
 
-static inline int arch_get_random_seed_long(unsigned long *v)
+static inline bool __must_check arch_get_random_seed_long(unsigned long *v)
 {
 	if (ppc_md.get_random_seed)
 		return ppc_md.get_random_seed(v);
 
-	return 0;
+	return false;
 }
-static inline int arch_get_random_seed_int(unsigned int *v)
+
+static inline bool __must_check arch_get_random_seed_int(unsigned int *v)
 {
 	unsigned long val;
-	int rc;
+	bool rc;
 
 	rc = arch_get_random_seed_long(&val);
 	if (rc)
@@ -34,16 +35,6 @@ static inline int arch_get_random_seed_int(unsigned int *v)
 
 	return rc;
 }
-
-static inline int arch_has_random(void)
-{
-	return 0;
-}
-
-static inline int arch_has_random_seed(void)
-{
-	return !!ppc_md.get_random_seed;
-}
 #endif /* CONFIG_ARCH_RANDOM */
 
 #ifdef CONFIG_PPC_POWERNV
diff --git a/arch/powerpc/include/asm/book3s/32/kup.h b/arch/powerpc/include/asm/book3s/32/kup.h
index f9dc597b0b86..3c0ba22dc360 100644
--- a/arch/powerpc/include/asm/book3s/32/kup.h
+++ b/arch/powerpc/include/asm/book3s/32/kup.h
@@ -102,41 +102,91 @@ static inline void kuap_update_sr(u32 sr, u32 addr, u32 end)
 	isync();	/* Context sync required after mtsrin() */
 }
 
-static inline void allow_user_access(void __user *to, const void __user *from, u32 size)
+static __always_inline void allow_user_access(void __user *to, const void __user *from,
+					      u32 size, unsigned long dir)
 {
 	u32 addr, end;
 
-	if (__builtin_constant_p(to) && to == NULL)
+	BUILD_BUG_ON(!__builtin_constant_p(dir));
+	BUILD_BUG_ON(dir == KUAP_CURRENT);
+
+	if (!(dir & KUAP_WRITE))
 		return;
 
 	addr = (__force u32)to;
 
-	if (!addr || addr >= TASK_SIZE || !size)
+	if (unlikely(addr >= TASK_SIZE || !size))
 		return;
 
 	end = min(addr + size, TASK_SIZE);
+
 	current->thread.kuap = (addr & 0xf0000000) | ((((end - 1) >> 28) + 1) & 0xf);
 	kuap_update_sr(mfsrin(addr) & ~SR_KS, addr, end);	/* Clear Ks */
 }
 
-static inline void prevent_user_access(void __user *to, const void __user *from, u32 size)
+static __always_inline void prevent_user_access(void __user *to, const void __user *from,
+						u32 size, unsigned long dir)
 {
-	u32 addr = (__force u32)to;
-	u32 end = min(addr + size, TASK_SIZE);
+	u32 addr, end;
+
+	BUILD_BUG_ON(!__builtin_constant_p(dir));
+
+	if (dir == KUAP_CURRENT) {
+		u32 kuap = current->thread.kuap;
 
-	if (!addr || addr >= TASK_SIZE || !size)
+		if (unlikely(!kuap))
+			return;
+
+		addr = kuap & 0xf0000000;
+		end = kuap << 28;
+	} else if (dir & KUAP_WRITE) {
+		addr = (__force u32)to;
+		end = min(addr + size, TASK_SIZE);
+
+		if (unlikely(addr >= TASK_SIZE || !size))
+			return;
+	} else {
 		return;
+	}
 
 	current->thread.kuap = 0;
 	kuap_update_sr(mfsrin(addr) | SR_KS, addr, end);	/* set Ks */
 }
 
-static inline bool bad_kuap_fault(struct pt_regs *regs, bool is_write)
+static inline unsigned long prevent_user_access_return(void)
+{
+	unsigned long flags = current->thread.kuap;
+	unsigned long addr = flags & 0xf0000000;
+	unsigned long end = flags << 28;
+	void __user *to = (__force void __user *)addr;
+
+	if (flags)
+		prevent_user_access(to, to, end - addr, KUAP_READ_WRITE);
+
+	return flags;
+}
+
+static inline void restore_user_access(unsigned long flags)
 {
+	unsigned long addr = flags & 0xf0000000;
+	unsigned long end = flags << 28;
+	void __user *to = (__force void __user *)addr;
+
+	if (flags)
+		allow_user_access(to, to, end - addr, KUAP_READ_WRITE);
+}
+
+static inline bool
+bad_kuap_fault(struct pt_regs *regs, unsigned long address, bool is_write)
+{
+	unsigned long begin = regs->kuap & 0xf0000000;
+	unsigned long end = regs->kuap << 28;
+
 	if (!is_write)
 		return false;
 
-	return WARN(!regs->kuap, "Bug: write fault blocked by segment registers !");
+	return WARN(address < begin || address >= end,
+		    "Bug: write fault blocked by segment registers !");
 }
 
 #endif /* CONFIG_PPC_KUAP */
diff --git a/arch/powerpc/include/asm/book3s/32/pgalloc.h b/arch/powerpc/include/asm/book3s/32/pgalloc.h
index 998317702630..dc5c039eb28e 100644
--- a/arch/powerpc/include/asm/book3s/32/pgalloc.h
+++ b/arch/powerpc/include/asm/book3s/32/pgalloc.h
@@ -49,7 +49,6 @@ static inline void pgtable_free(void *table, unsigned index_size)
 
 #define get_hugepd_cache_index(x)  (x)
 
-#ifdef CONFIG_SMP
 static inline void pgtable_free_tlb(struct mmu_gather *tlb,
 				    void *table, int shift)
 {
@@ -66,13 +65,6 @@ static inline void __tlb_remove_table(void *_table)
 
 	pgtable_free(table, shift);
 }
-#else
-static inline void pgtable_free_tlb(struct mmu_gather *tlb,
-				    void *table, int shift)
-{
-	pgtable_free(table, shift);
-}
-#endif
 
 static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t table,
 				  unsigned long address)
diff --git a/arch/powerpc/include/asm/book3s/32/pgtable.h b/arch/powerpc/include/asm/book3s/32/pgtable.h
index 0796533d37dd..5b39c11e884a 100644
--- a/arch/powerpc/include/asm/book3s/32/pgtable.h
+++ b/arch/powerpc/include/asm/book3s/32/pgtable.h
@@ -193,7 +193,12 @@ int map_kernel_page(unsigned long va, phys_addr_t pa, pgprot_t prot);
 #else
 #define VMALLOC_START ((((long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1)))
 #endif
+
+#ifdef CONFIG_KASAN_VMALLOC
+#define VMALLOC_END	_ALIGN_DOWN(ioremap_bot, PAGE_SIZE << KASAN_SHADOW_SCALE_SHIFT)
+#else
 #define VMALLOC_END	ioremap_bot
+#endif
 
 #ifndef __ASSEMBLY__
 #include <linux/sched.h>
diff --git a/arch/powerpc/include/asm/book3s/64/kup-radix.h b/arch/powerpc/include/asm/book3s/64/kup-radix.h
index f254de956d6a..90dd3a3fc8c7 100644
--- a/arch/powerpc/include/asm/book3s/64/kup-radix.h
+++ b/arch/powerpc/include/asm/book3s/64/kup-radix.h
@@ -63,6 +63,14 @@
  * because that would require an expensive read/modify write of the AMR.
  */
 
+static inline unsigned long get_kuap(void)
+{
+	if (!early_mmu_has_feature(MMU_FTR_RADIX_KUAP))
+		return 0;
+
+	return mfspr(SPRN_AMR);
+}
+
 static inline void set_kuap(unsigned long value)
 {
 	if (!early_mmu_has_feature(MMU_FTR_RADIX_KUAP))
@@ -77,25 +85,43 @@ static inline void set_kuap(unsigned long value)
 	isync();
 }
 
-static inline void allow_user_access(void __user *to, const void __user *from,
-				     unsigned long size)
+static __always_inline void allow_user_access(void __user *to, const void __user *from,
+					      unsigned long size, unsigned long dir)
 {
 	// This is written so we can resolve to a single case at build time
-	if (__builtin_constant_p(to) && to == NULL)
+	BUILD_BUG_ON(!__builtin_constant_p(dir));
+	if (dir == KUAP_READ)
 		set_kuap(AMR_KUAP_BLOCK_WRITE);
-	else if (__builtin_constant_p(from) && from == NULL)
+	else if (dir == KUAP_WRITE)
 		set_kuap(AMR_KUAP_BLOCK_READ);
-	else
+	else if (dir == KUAP_READ_WRITE)
 		set_kuap(0);
+	else
+		BUILD_BUG();
 }
 
 static inline void prevent_user_access(void __user *to, const void __user *from,
-				       unsigned long size)
+				       unsigned long size, unsigned long dir)
+{
+	set_kuap(AMR_KUAP_BLOCKED);
+}
+
+static inline unsigned long prevent_user_access_return(void)
 {
+	unsigned long flags = get_kuap();
+
 	set_kuap(AMR_KUAP_BLOCKED);
+
+	return flags;
+}
+
+static inline void restore_user_access(unsigned long flags)
+{
+	set_kuap(flags);
 }
 
-static inline bool bad_kuap_fault(struct pt_regs *regs, bool is_write)
+static inline bool
+bad_kuap_fault(struct pt_regs *regs, unsigned long address, bool is_write)
 {
 	return WARN(mmu_has_feature(MMU_FTR_RADIX_KUAP) &&
 		    (regs->kuap & (is_write ? AMR_KUAP_BLOCK_WRITE : AMR_KUAP_BLOCK_READ)),
diff --git a/arch/powerpc/include/asm/book3s/64/pgalloc.h b/arch/powerpc/include/asm/book3s/64/pgalloc.h
index f6968c811026..a41e91bd0580 100644
--- a/arch/powerpc/include/asm/book3s/64/pgalloc.h
+++ b/arch/powerpc/include/asm/book3s/64/pgalloc.h
@@ -19,9 +19,7 @@ extern struct vmemmap_backing *vmemmap_list;
 extern pmd_t *pmd_fragment_alloc(struct mm_struct *, unsigned long);
 extern void pmd_fragment_free(unsigned long *);
 extern void pgtable_free_tlb(struct mmu_gather *tlb, void *table, int shift);
-#ifdef CONFIG_SMP
 extern void __tlb_remove_table(void *_table);
-#endif
 void pte_frag_destroy(void *pte_frag);
 
 static inline pgd_t *radix__pgd_alloc(struct mm_struct *mm)
diff --git a/arch/powerpc/include/asm/book3s/64/pgtable.h b/arch/powerpc/include/asm/book3s/64/pgtable.h
index b01624e5c467..201a69e6a355 100644
--- a/arch/powerpc/include/asm/book3s/64/pgtable.h
+++ b/arch/powerpc/include/asm/book3s/64/pgtable.h
@@ -1355,18 +1355,21 @@ static inline bool is_pte_rw_upgrade(unsigned long old_val, unsigned long new_va
  * Like pmd_huge() and pmd_large(), but works regardless of config options
  */
 #define pmd_is_leaf pmd_is_leaf
+#define pmd_leaf pmd_is_leaf
 static inline bool pmd_is_leaf(pmd_t pmd)
 {
 	return !!(pmd_raw(pmd) & cpu_to_be64(_PAGE_PTE));
 }
 
 #define pud_is_leaf pud_is_leaf
+#define pud_leaf pud_is_leaf
 static inline bool pud_is_leaf(pud_t pud)
 {
 	return !!(pud_raw(pud) & cpu_to_be64(_PAGE_PTE));
 }
 
 #define pgd_is_leaf pgd_is_leaf
+#define pgd_leaf pgd_is_leaf
 static inline bool pgd_is_leaf(pgd_t pgd)
 {
 	return !!(pgd_raw(pgd) & cpu_to_be64(_PAGE_PTE));
diff --git a/arch/powerpc/include/asm/compat.h b/arch/powerpc/include/asm/compat.h
index 74d0db511099..3e3cdfaa76c6 100644
--- a/arch/powerpc/include/asm/compat.h
+++ b/arch/powerpc/include/asm/compat.h
@@ -96,23 +96,6 @@ typedef u32		compat_sigset_word;
 
 #define COMPAT_OFF_T_MAX	0x7fffffff
 
-/*
- * A pointer passed in from user mode. This should not
- * be used for syscall parameters, just declare them
- * as pointers because the syscall entry code will have
- * appropriately converted them already.
- */
-
-static inline void __user *compat_ptr(compat_uptr_t uptr)
-{
-	return (void __user *)(unsigned long)uptr;
-}
-
-static inline compat_uptr_t ptr_to_compat(void __user *uptr)
-{
-	return (u32)(unsigned long)uptr;
-}
-
 static inline void __user *arch_compat_alloc_user_space(long len)
 {
 	struct pt_regs *regs = current->thread.regs;
diff --git a/arch/powerpc/include/asm/cpm.h b/arch/powerpc/include/asm/cpm.h
index 4c24ea8209bb..ce483b0f8a4d 100644
--- a/arch/powerpc/include/asm/cpm.h
+++ b/arch/powerpc/include/asm/cpm.h
@@ -1,171 +1 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __CPM_H
-#define __CPM_H
-
-#include <linux/compiler.h>
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/of.h>
-#include <soc/fsl/qe/qe.h>
-
-/*
- * SPI Parameter RAM common to QE and CPM.
- */
-struct spi_pram {
-	__be16	rbase;	/* Rx Buffer descriptor base address */
-	__be16	tbase;	/* Tx Buffer descriptor base address */
-	u8	rfcr;	/* Rx function code */
-	u8	tfcr;	/* Tx function code */
-	__be16	mrblr;	/* Max receive buffer length */
-	__be32	rstate;	/* Internal */
-	__be32	rdp;	/* Internal */
-	__be16	rbptr;	/* Internal */
-	__be16	rbc;	/* Internal */
-	__be32	rxtmp;	/* Internal */
-	__be32	tstate;	/* Internal */
-	__be32	tdp;	/* Internal */
-	__be16	tbptr;	/* Internal */
-	__be16	tbc;	/* Internal */
-	__be32	txtmp;	/* Internal */
-	__be32	res;	/* Tx temp. */
-	__be16  rpbase;	/* Relocation pointer (CPM1 only) */
-	__be16	res1;	/* Reserved */
-};
-
-/*
- * USB Controller pram common to QE and CPM.
- */
-struct usb_ctlr {
-	u8	usb_usmod;
-	u8	usb_usadr;
-	u8	usb_uscom;
-	u8	res1[1];
-	__be16	usb_usep[4];
-	u8	res2[4];
-	__be16	usb_usber;
-	u8	res3[2];
-	__be16	usb_usbmr;
-	u8	res4[1];
-	u8	usb_usbs;
-	/* Fields down below are QE-only */
-	__be16	usb_ussft;
-	u8	res5[2];
-	__be16	usb_usfrn;
-	u8	res6[0x22];
-} __attribute__ ((packed));
-
-/*
- * Function code bits, usually generic to devices.
- */
-#ifdef CONFIG_CPM1
-#define CPMFCR_GBL	((u_char)0x00)	/* Flag doesn't exist in CPM1 */
-#define CPMFCR_TC2	((u_char)0x00)	/* Flag doesn't exist in CPM1 */
-#define CPMFCR_DTB	((u_char)0x00)	/* Flag doesn't exist in CPM1 */
-#define CPMFCR_BDB	((u_char)0x00)	/* Flag doesn't exist in CPM1 */
-#else
-#define CPMFCR_GBL	((u_char)0x20)	/* Set memory snooping */
-#define CPMFCR_TC2	((u_char)0x04)	/* Transfer code 2 value */
-#define CPMFCR_DTB	((u_char)0x02)	/* Use local bus for data when set */
-#define CPMFCR_BDB	((u_char)0x01)	/* Use local bus for BD when set */
-#endif
-#define CPMFCR_EB	((u_char)0x10)	/* Set big endian byte order */
-
-/* Opcodes common to CPM1 and CPM2
-*/
-#define CPM_CR_INIT_TRX		((ushort)0x0000)
-#define CPM_CR_INIT_RX		((ushort)0x0001)
-#define CPM_CR_INIT_TX		((ushort)0x0002)
-#define CPM_CR_HUNT_MODE	((ushort)0x0003)
-#define CPM_CR_STOP_TX		((ushort)0x0004)
-#define CPM_CR_GRA_STOP_TX	((ushort)0x0005)
-#define CPM_CR_RESTART_TX	((ushort)0x0006)
-#define CPM_CR_CLOSE_RX_BD	((ushort)0x0007)
-#define CPM_CR_SET_GADDR	((ushort)0x0008)
-#define CPM_CR_SET_TIMER	((ushort)0x0008)
-#define CPM_CR_STOP_IDMA	((ushort)0x000b)
-
-/* Buffer descriptors used by many of the CPM protocols. */
-typedef struct cpm_buf_desc {
-	ushort	cbd_sc;		/* Status and Control */
-	ushort	cbd_datlen;	/* Data length in buffer */
-	uint	cbd_bufaddr;	/* Buffer address in host memory */
-} cbd_t;
-
-/* Buffer descriptor control/status used by serial
- */
-
-#define BD_SC_EMPTY	(0x8000)	/* Receive is empty */
-#define BD_SC_READY	(0x8000)	/* Transmit is ready */
-#define BD_SC_WRAP	(0x2000)	/* Last buffer descriptor */
-#define BD_SC_INTRPT	(0x1000)	/* Interrupt on change */
-#define BD_SC_LAST	(0x0800)	/* Last buffer in frame */
-#define BD_SC_TC	(0x0400)	/* Transmit CRC */
-#define BD_SC_CM	(0x0200)	/* Continuous mode */
-#define BD_SC_ID	(0x0100)	/* Rec'd too many idles */
-#define BD_SC_P		(0x0100)	/* xmt preamble */
-#define BD_SC_BR	(0x0020)	/* Break received */
-#define BD_SC_FR	(0x0010)	/* Framing error */
-#define BD_SC_PR	(0x0008)	/* Parity error */
-#define BD_SC_NAK	(0x0004)	/* NAK - did not respond */
-#define BD_SC_OV	(0x0002)	/* Overrun */
-#define BD_SC_UN	(0x0002)	/* Underrun */
-#define BD_SC_CD	(0x0001)	/* */
-#define BD_SC_CL	(0x0001)	/* Collision */
-
-/* Buffer descriptor control/status used by Ethernet receive.
- * Common to SCC and FCC.
- */
-#define BD_ENET_RX_EMPTY	(0x8000)
-#define BD_ENET_RX_WRAP		(0x2000)
-#define BD_ENET_RX_INTR		(0x1000)
-#define BD_ENET_RX_LAST		(0x0800)
-#define BD_ENET_RX_FIRST	(0x0400)
-#define BD_ENET_RX_MISS		(0x0100)
-#define BD_ENET_RX_BC		(0x0080)	/* FCC Only */
-#define BD_ENET_RX_MC		(0x0040)	/* FCC Only */
-#define BD_ENET_RX_LG		(0x0020)
-#define BD_ENET_RX_NO		(0x0010)
-#define BD_ENET_RX_SH		(0x0008)
-#define BD_ENET_RX_CR		(0x0004)
-#define BD_ENET_RX_OV		(0x0002)
-#define BD_ENET_RX_CL		(0x0001)
-#define BD_ENET_RX_STATS	(0x01ff)	/* All status bits */
-
-/* Buffer descriptor control/status used by Ethernet transmit.
- * Common to SCC and FCC.
- */
-#define BD_ENET_TX_READY	(0x8000)
-#define BD_ENET_TX_PAD		(0x4000)
-#define BD_ENET_TX_WRAP		(0x2000)
-#define BD_ENET_TX_INTR		(0x1000)
-#define BD_ENET_TX_LAST		(0x0800)
-#define BD_ENET_TX_TC		(0x0400)
-#define BD_ENET_TX_DEF		(0x0200)
-#define BD_ENET_TX_HB		(0x0100)
-#define BD_ENET_TX_LC		(0x0080)
-#define BD_ENET_TX_RL		(0x0040)
-#define BD_ENET_TX_RCMASK	(0x003c)
-#define BD_ENET_TX_UN		(0x0002)
-#define BD_ENET_TX_CSL		(0x0001)
-#define BD_ENET_TX_STATS	(0x03ff)	/* All status bits */
-
-/* Buffer descriptor control/status used by Transparent mode SCC.
- */
-#define BD_SCC_TX_LAST		(0x0800)
-
-/* Buffer descriptor control/status used by I2C.
- */
-#define BD_I2C_START		(0x0400)
-
-#ifdef CONFIG_CPM
-int cpm_command(u32 command, u8 opcode);
-#else
-static inline int cpm_command(u32 command, u8 opcode)
-{
-	return -ENOSYS;
-}
-#endif /* CONFIG_CPM */
-
-int cpm2_gpiochip_add32(struct device *dev);
-
-#endif
+#include <soc/fsl/cpm.h>
diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h
index cf00ff0d121d..40a4d3c6fd99 100644
--- a/arch/powerpc/include/asm/cputable.h
+++ b/arch/powerpc/include/asm/cputable.h
@@ -212,6 +212,7 @@ static inline void cpu_feature_keys_init(void) { }
 #define CPU_FTR_P9_TLBIE_STQ_BUG	LONG_ASM_CONST(0x0000400000000000)
 #define CPU_FTR_P9_TIDR			LONG_ASM_CONST(0x0000800000000000)
 #define CPU_FTR_P9_TLBIE_ERAT_BUG	LONG_ASM_CONST(0x0001000000000000)
+#define CPU_FTR_P9_RADIX_PREFETCH_BUG	LONG_ASM_CONST(0x0002000000000000)
 
 #ifndef __ASSEMBLY__
 
@@ -459,8 +460,10 @@ static inline void cpu_feature_keys_init(void) { }
 	    CPU_FTR_DBELL | CPU_FTR_HAS_PPR | CPU_FTR_ARCH_207S | \
 	    CPU_FTR_TM_COMP | CPU_FTR_ARCH_300 | CPU_FTR_PKEY | \
 	    CPU_FTR_P9_TLBIE_STQ_BUG | CPU_FTR_P9_TLBIE_ERAT_BUG | CPU_FTR_P9_TIDR)
-#define CPU_FTRS_POWER9_DD2_0 CPU_FTRS_POWER9
-#define CPU_FTRS_POWER9_DD2_1 (CPU_FTRS_POWER9 | CPU_FTR_POWER9_DD2_1)
+#define CPU_FTRS_POWER9_DD2_0 (CPU_FTRS_POWER9 | CPU_FTR_P9_RADIX_PREFETCH_BUG)
+#define CPU_FTRS_POWER9_DD2_1 (CPU_FTRS_POWER9 | \
+			       CPU_FTR_P9_RADIX_PREFETCH_BUG | \
+			       CPU_FTR_POWER9_DD2_1)
 #define CPU_FTRS_POWER9_DD2_2 (CPU_FTRS_POWER9 | CPU_FTR_POWER9_DD2_1 | \
 			       CPU_FTR_P9_TM_HV_ASSIST | \
 			       CPU_FTR_P9_TM_XER_SO_BUG)
diff --git a/arch/powerpc/include/asm/firmware.h b/arch/powerpc/include/asm/firmware.h
index b3e214a97f3a..ca33f4ef6cb4 100644
--- a/arch/powerpc/include/asm/firmware.h
+++ b/arch/powerpc/include/asm/firmware.h
@@ -33,7 +33,7 @@
 #define FW_FEATURE_LLAN		ASM_CONST(0x0000000000010000)
 #define FW_FEATURE_BULK_REMOVE	ASM_CONST(0x0000000000020000)
 #define FW_FEATURE_XDABR	ASM_CONST(0x0000000000040000)
-#define FW_FEATURE_MULTITCE	ASM_CONST(0x0000000000080000)
+#define FW_FEATURE_PUT_TCE_IND	ASM_CONST(0x0000000000080000)
 #define FW_FEATURE_SPLPAR	ASM_CONST(0x0000000000100000)
 #define FW_FEATURE_LPAR		ASM_CONST(0x0000000000400000)
 #define FW_FEATURE_PS3_LV1	ASM_CONST(0x0000000000800000)
@@ -51,6 +51,7 @@
 #define FW_FEATURE_BLOCK_REMOVE ASM_CONST(0x0000001000000000)
 #define FW_FEATURE_PAPR_SCM 	ASM_CONST(0x0000002000000000)
 #define FW_FEATURE_ULTRAVISOR	ASM_CONST(0x0000004000000000)
+#define FW_FEATURE_STUFF_TCE	ASM_CONST(0x0000008000000000)
 
 #ifndef __ASSEMBLY__
 
@@ -63,7 +64,8 @@ enum {
 		FW_FEATURE_MIGRATE | FW_FEATURE_PERFMON | FW_FEATURE_CRQ |
 		FW_FEATURE_VIO | FW_FEATURE_RDMA | FW_FEATURE_LLAN |
 		FW_FEATURE_BULK_REMOVE | FW_FEATURE_XDABR |
-		FW_FEATURE_MULTITCE | FW_FEATURE_SPLPAR | FW_FEATURE_LPAR |
+		FW_FEATURE_PUT_TCE_IND | FW_FEATURE_STUFF_TCE |
+		FW_FEATURE_SPLPAR | FW_FEATURE_LPAR |
 		FW_FEATURE_CMO | FW_FEATURE_VPHN | FW_FEATURE_XCMO |
 		FW_FEATURE_SET_MODE | FW_FEATURE_BEST_ENERGY |
 		FW_FEATURE_TYPE1_AFFINITY | FW_FEATURE_PRRN |
diff --git a/arch/powerpc/include/asm/futex.h b/arch/powerpc/include/asm/futex.h
index eea28ca679db..bc7d9d06a6d9 100644
--- a/arch/powerpc/include/asm/futex.h
+++ b/arch/powerpc/include/asm/futex.h
@@ -35,7 +35,7 @@ static inline int arch_futex_atomic_op_inuser(int op, int oparg, int *oval,
 {
 	int oldval = 0, ret;
 
-	allow_write_to_user(uaddr, sizeof(*uaddr));
+	allow_read_write_user(uaddr, uaddr, sizeof(*uaddr));
 	pagefault_disable();
 
 	switch (op) {
@@ -62,7 +62,7 @@ static inline int arch_futex_atomic_op_inuser(int op, int oparg, int *oval,
 
 	*oval = oldval;
 
-	prevent_write_to_user(uaddr, sizeof(*uaddr));
+	prevent_read_write_user(uaddr, uaddr, sizeof(*uaddr));
 	return ret;
 }
 
@@ -76,7 +76,8 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
 	if (!access_ok(uaddr, sizeof(u32)))
 		return -EFAULT;
 
-	allow_write_to_user(uaddr, sizeof(*uaddr));
+	allow_read_write_user(uaddr, uaddr, sizeof(*uaddr));
+
         __asm__ __volatile__ (
         PPC_ATOMIC_ENTRY_BARRIER
 "1:     lwarx   %1,0,%3         # futex_atomic_cmpxchg_inatomic\n\
@@ -97,7 +98,8 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
         : "cc", "memory");
 
 	*uval = prev;
-	prevent_write_to_user(uaddr, sizeof(*uaddr));
+	prevent_read_write_user(uaddr, uaddr, sizeof(*uaddr));
+
         return ret;
 }
 
diff --git a/arch/powerpc/include/asm/hvcall.h b/arch/powerpc/include/asm/hvcall.h
index 13bd870609c3..e90c073e437e 100644
--- a/arch/powerpc/include/asm/hvcall.h
+++ b/arch/powerpc/include/asm/hvcall.h
@@ -350,6 +350,7 @@
 #define H_SVM_PAGE_OUT		0xEF04
 #define H_SVM_INIT_START	0xEF08
 #define H_SVM_INIT_DONE		0xEF0C
+#define H_SVM_INIT_ABORT	0xEF14
 
 /* Values for 2nd argument to H_SET_MODE */
 #define H_SET_MODE_RESOURCE_SET_CIABR		1
diff --git a/arch/powerpc/include/asm/hw_breakpoint.h b/arch/powerpc/include/asm/hw_breakpoint.h
index 27ac6f5d2891..f2f8d8aa8e3b 100644
--- a/arch/powerpc/include/asm/hw_breakpoint.h
+++ b/arch/powerpc/include/asm/hw_breakpoint.h
@@ -34,7 +34,11 @@ struct arch_hw_breakpoint {
 #define HW_BRK_TYPE_PRIV_ALL	(HW_BRK_TYPE_USER | HW_BRK_TYPE_KERNEL | \
 				 HW_BRK_TYPE_HYP)
 
+#ifdef CONFIG_PPC_8xx
+#define HW_BREAKPOINT_ALIGN 0x3
+#else
 #define HW_BREAKPOINT_ALIGN 0x7
+#endif
 
 #define DABR_MAX_LEN	8
 #define DAWR_MAX_LEN	512
diff --git a/arch/powerpc/include/asm/kasan.h b/arch/powerpc/include/asm/kasan.h
index 296e51c2f066..fbff9ff9032e 100644
--- a/arch/powerpc/include/asm/kasan.h
+++ b/arch/powerpc/include/asm/kasan.h
@@ -31,9 +31,11 @@
 void kasan_early_init(void);
 void kasan_mmu_init(void);
 void kasan_init(void);
+void kasan_late_init(void);
 #else
 static inline void kasan_init(void) { }
 static inline void kasan_mmu_init(void) { }
+static inline void kasan_late_init(void) { }
 #endif
 
 #endif /* __ASSEMBLY */
diff --git a/arch/powerpc/include/asm/kup.h b/arch/powerpc/include/asm/kup.h
index 5b5e39643a27..92bcd1a26d73 100644
--- a/arch/powerpc/include/asm/kup.h
+++ b/arch/powerpc/include/asm/kup.h
@@ -2,6 +2,16 @@
 #ifndef _ASM_POWERPC_KUP_H_
 #define _ASM_POWERPC_KUP_H_
 
+#define KUAP_READ	1
+#define KUAP_WRITE	2
+#define KUAP_READ_WRITE	(KUAP_READ | KUAP_WRITE)
+/*
+ * For prevent_user_access() only.
+ * Use the current saved situation instead of the to/from/size params.
+ * Used on book3s/32
+ */
+#define KUAP_CURRENT	4
+
 #ifdef CONFIG_PPC64
 #include <asm/book3s/64/kup-radix.h>
 #endif
@@ -42,32 +52,55 @@ void setup_kuap(bool disabled);
 #else
 static inline void setup_kuap(bool disabled) { }
 static inline void allow_user_access(void __user *to, const void __user *from,
-				     unsigned long size) { }
+				     unsigned long size, unsigned long dir) { }
 static inline void prevent_user_access(void __user *to, const void __user *from,
-				       unsigned long size) { }
-static inline bool bad_kuap_fault(struct pt_regs *regs, bool is_write) { return false; }
+				       unsigned long size, unsigned long dir) { }
+static inline unsigned long prevent_user_access_return(void) { return 0UL; }
+static inline void restore_user_access(unsigned long flags) { }
+static inline bool
+bad_kuap_fault(struct pt_regs *regs, unsigned long address, bool is_write)
+{
+	return false;
+}
 #endif /* CONFIG_PPC_KUAP */
 
 static inline void allow_read_from_user(const void __user *from, unsigned long size)
 {
-	allow_user_access(NULL, from, size);
+	allow_user_access(NULL, from, size, KUAP_READ);
 }
 
 static inline void allow_write_to_user(void __user *to, unsigned long size)
 {
-	allow_user_access(to, NULL, size);
+	allow_user_access(to, NULL, size, KUAP_WRITE);
+}
+
+static inline void allow_read_write_user(void __user *to, const void __user *from,
+					 unsigned long size)
+{
+	allow_user_access(to, from, size, KUAP_READ_WRITE);
 }
 
 static inline void prevent_read_from_user(const void __user *from, unsigned long size)
 {
-	prevent_user_access(NULL, from, size);
+	prevent_user_access(NULL, from, size, KUAP_READ);
 }
 
 static inline void prevent_write_to_user(void __user *to, unsigned long size)
 {
-	prevent_user_access(to, NULL, size);
+	prevent_user_access(to, NULL, size, KUAP_WRITE);
+}
+
+static inline void prevent_read_write_user(void __user *to, const void __user *from,
+					   unsigned long size)
+{
+	prevent_user_access(to, from, size, KUAP_READ_WRITE);
+}
+
+static inline void prevent_current_access_user(void)
+{
+	prevent_user_access(NULL, NULL, ~0UL, KUAP_CURRENT);
 }
 
 #endif /* !__ASSEMBLY__ */
 
-#endif /* _ASM_POWERPC_KUP_H_ */
+#endif /* _ASM_POWERPC_KUAP_H_ */
diff --git a/arch/powerpc/include/asm/kvm_book3s_uvmem.h b/arch/powerpc/include/asm/kvm_book3s_uvmem.h
index 50204e228f16..5a9834e0e2d1 100644
--- a/arch/powerpc/include/asm/kvm_book3s_uvmem.h
+++ b/arch/powerpc/include/asm/kvm_book3s_uvmem.h
@@ -19,8 +19,9 @@ unsigned long kvmppc_h_svm_page_out(struct kvm *kvm,
 unsigned long kvmppc_h_svm_init_start(struct kvm *kvm);
 unsigned long kvmppc_h_svm_init_done(struct kvm *kvm);
 int kvmppc_send_page_to_uv(struct kvm *kvm, unsigned long gfn);
+unsigned long kvmppc_h_svm_init_abort(struct kvm *kvm);
 void kvmppc_uvmem_drop_pages(const struct kvm_memory_slot *free,
-			     struct kvm *kvm);
+			     struct kvm *kvm, bool skip_page_out);
 #else
 static inline int kvmppc_uvmem_init(void)
 {
@@ -62,6 +63,11 @@ static inline unsigned long kvmppc_h_svm_init_done(struct kvm *kvm)
 	return H_UNSUPPORTED;
 }
 
+static inline unsigned long kvmppc_h_svm_init_abort(struct kvm *kvm)
+{
+	return H_UNSUPPORTED;
+}
+
 static inline int kvmppc_send_page_to_uv(struct kvm *kvm, unsigned long gfn)
 {
 	return -EFAULT;
@@ -69,6 +75,6 @@ static inline int kvmppc_send_page_to_uv(struct kvm *kvm, unsigned long gfn)
 
 static inline void
 kvmppc_uvmem_drop_pages(const struct kvm_memory_slot *free,
-			struct kvm *kvm) { }
+			struct kvm *kvm, bool skip_page_out) { }
 #endif /* CONFIG_PPC_UV */
 #endif /* __ASM_KVM_BOOK3S_UVMEM_H__ */
diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h
index 0a398f2321c2..6e8b8ffd06ad 100644
--- a/arch/powerpc/include/asm/kvm_host.h
+++ b/arch/powerpc/include/asm/kvm_host.h
@@ -278,6 +278,7 @@ struct kvm_resize_hpt;
 /* Flag values for kvm_arch.secure_guest */
 #define KVMPPC_SECURE_INIT_START 0x1 /* H_SVM_INIT_START has been called */
 #define KVMPPC_SECURE_INIT_DONE  0x2 /* H_SVM_INIT_DONE completed */
+#define KVMPPC_SECURE_INIT_ABORT 0x4 /* H_SVM_INIT_ABORT issued */
 
 struct kvm_arch {
 	unsigned int lpid;
diff --git a/arch/powerpc/include/asm/kvm_ppc.h b/arch/powerpc/include/asm/kvm_ppc.h
index 3d2f871241a8..bc2494e5710a 100644
--- a/arch/powerpc/include/asm/kvm_ppc.h
+++ b/arch/powerpc/include/asm/kvm_ppc.h
@@ -119,8 +119,7 @@ extern int kvmppc_xlate(struct kvm_vcpu *vcpu, ulong eaddr,
 			enum xlate_instdata xlid, enum xlate_readwrite xlrw,
 			struct kvmppc_pte *pte);
 
-extern struct kvm_vcpu *kvmppc_core_vcpu_create(struct kvm *kvm,
-                                                unsigned int id);
+extern int kvmppc_core_vcpu_create(struct kvm_vcpu *vcpu);
 extern void kvmppc_core_vcpu_free(struct kvm_vcpu *vcpu);
 extern int kvmppc_core_vcpu_setup(struct kvm_vcpu *vcpu);
 extern int kvmppc_core_check_processor_compat(void);
@@ -274,7 +273,7 @@ struct kvmppc_ops {
 	void (*inject_interrupt)(struct kvm_vcpu *vcpu, int vec, u64 srr1_flags);
 	void (*set_msr)(struct kvm_vcpu *vcpu, u64 msr);
 	int (*vcpu_run)(struct kvm_run *run, struct kvm_vcpu *vcpu);
-	struct kvm_vcpu *(*vcpu_create)(struct kvm *kvm, unsigned int id);
+	int (*vcpu_create)(struct kvm_vcpu *vcpu);
 	void (*vcpu_free)(struct kvm_vcpu *vcpu);
 	int (*check_requests)(struct kvm_vcpu *vcpu);
 	int (*get_dirty_log)(struct kvm *kvm, struct kvm_dirty_log *log);
diff --git a/arch/powerpc/include/asm/mmu_context.h b/arch/powerpc/include/asm/mmu_context.h
index 58efca934311..360367c579de 100644
--- a/arch/powerpc/include/asm/mmu_context.h
+++ b/arch/powerpc/include/asm/mmu_context.h
@@ -238,11 +238,6 @@ static inline void arch_unmap(struct mm_struct *mm,
 		mm->context.vdso_base = 0;
 }
 
-static inline void arch_bprm_mm_init(struct mm_struct *mm,
-				     struct vm_area_struct *vma)
-{
-}
-
 #ifdef CONFIG_PPC_MEM_KEYS
 bool arch_vma_access_permitted(struct vm_area_struct *vma, bool write,
 			       bool execute, bool foreign);
diff --git a/arch/powerpc/include/asm/nohash/32/kup-8xx.h b/arch/powerpc/include/asm/nohash/32/kup-8xx.h
index 1006a427e99c..85ed2390fb99 100644
--- a/arch/powerpc/include/asm/nohash/32/kup-8xx.h
+++ b/arch/powerpc/include/asm/nohash/32/kup-8xx.h
@@ -35,18 +35,33 @@
 #include <asm/reg.h>
 
 static inline void allow_user_access(void __user *to, const void __user *from,
-				     unsigned long size)
+				     unsigned long size, unsigned long dir)
 {
 	mtspr(SPRN_MD_AP, MD_APG_INIT);
 }
 
 static inline void prevent_user_access(void __user *to, const void __user *from,
-				       unsigned long size)
+				       unsigned long size, unsigned long dir)
 {
 	mtspr(SPRN_MD_AP, MD_APG_KUAP);
 }
 
-static inline bool bad_kuap_fault(struct pt_regs *regs, bool is_write)
+static inline unsigned long prevent_user_access_return(void)
+{
+	unsigned long flags = mfspr(SPRN_MD_AP);
+
+	mtspr(SPRN_MD_AP, MD_APG_KUAP);
+
+	return flags;
+}
+
+static inline void restore_user_access(unsigned long flags)
+{
+	mtspr(SPRN_MD_AP, flags);
+}
+
+static inline bool
+bad_kuap_fault(struct pt_regs *regs, unsigned long address, bool is_write)
 {
 	return WARN(!((regs->kuap ^ MD_APG_KUAP) & 0xf0000000),
 		    "Bug: fault blocked by AP register !");
diff --git a/arch/powerpc/include/asm/nohash/32/pgtable.h b/arch/powerpc/include/asm/nohash/32/pgtable.h
index 552b96eef0c8..60c4d829152e 100644
--- a/arch/powerpc/include/asm/nohash/32/pgtable.h
+++ b/arch/powerpc/include/asm/nohash/32/pgtable.h
@@ -114,7 +114,12 @@ int map_kernel_page(unsigned long va, phys_addr_t pa, pgprot_t prot);
 #else
 #define VMALLOC_START ((((long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1)))
 #endif
+
+#ifdef CONFIG_KASAN_VMALLOC
+#define VMALLOC_END	_ALIGN_DOWN(ioremap_bot, PAGE_SIZE << KASAN_SHADOW_SCALE_SHIFT)
+#else
 #define VMALLOC_END	ioremap_bot
+#endif
 
 /*
  * Bits in a linux-style PTE.  These match the bits in the
diff --git a/arch/powerpc/include/asm/nohash/pgalloc.h b/arch/powerpc/include/asm/nohash/pgalloc.h
index 332b13b4ecdb..29c43665a753 100644
--- a/arch/powerpc/include/asm/nohash/pgalloc.h
+++ b/arch/powerpc/include/asm/nohash/pgalloc.h
@@ -46,7 +46,6 @@ static inline void pgtable_free(void *table, int shift)
 
 #define get_hugepd_cache_index(x)	(x)
 
-#ifdef CONFIG_SMP
 static inline void pgtable_free_tlb(struct mmu_gather *tlb, void *table, int shift)
 {
 	unsigned long pgf = (unsigned long)table;
@@ -64,13 +63,6 @@ static inline void __tlb_remove_table(void *_table)
 	pgtable_free(table, shift);
 }
 
-#else
-static inline void pgtable_free_tlb(struct mmu_gather *tlb, void *table, int shift)
-{
-	pgtable_free(table, shift);
-}
-#endif
-
 static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t table,
 				  unsigned long address)
 {
diff --git a/arch/powerpc/include/asm/page.h b/arch/powerpc/include/asm/page.h
index 7f1fd41e3065..86332080399a 100644
--- a/arch/powerpc/include/asm/page.h
+++ b/arch/powerpc/include/asm/page.h
@@ -209,7 +209,7 @@ static inline bool pfn_valid(unsigned long pfn)
  */
 #if defined(CONFIG_PPC32) && defined(CONFIG_BOOKE)
 #define __va(x) ((void *)(unsigned long)((phys_addr_t)(x) + VIRT_PHYS_OFFSET))
-#define __pa(x) ((unsigned long)(x) - VIRT_PHYS_OFFSET)
+#define __pa(x) ((phys_addr_t)(unsigned long)(x) - VIRT_PHYS_OFFSET)
 #else
 #ifdef CONFIG_PPC64
 /*
diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
index ea6ec65970ef..69f4cb3b7c56 100644
--- a/arch/powerpc/include/asm/pci-bridge.h
+++ b/arch/powerpc/include/asm/pci-bridge.h
@@ -223,12 +223,15 @@ struct pci_dn {
 extern struct pci_dn *pci_get_pdn_by_devfn(struct pci_bus *bus,
 					   int devfn);
 extern struct pci_dn *pci_get_pdn(struct pci_dev *pdev);
-extern struct pci_dn *add_dev_pci_data(struct pci_dev *pdev);
-extern void remove_dev_pci_data(struct pci_dev *pdev);
 extern struct pci_dn *pci_add_device_node_info(struct pci_controller *hose,
 					       struct device_node *dn);
 extern void pci_remove_device_node_info(struct device_node *dn);
 
+#ifdef CONFIG_PCI_IOV
+struct pci_dn *add_sriov_vf_pdns(struct pci_dev *pdev);
+void remove_sriov_vf_pdns(struct pci_dev *pdev);
+#endif
+
 static inline int pci_device_from_OF_node(struct device_node *np,
 					  u8 *bus, u8 *devfn)
 {
diff --git a/arch/powerpc/include/asm/pci.h b/arch/powerpc/include/asm/pci.h
index 327567b8f7d6..63ed7e3b0ba3 100644
--- a/arch/powerpc/include/asm/pci.h
+++ b/arch/powerpc/include/asm/pci.h
@@ -113,7 +113,6 @@ extern pgprot_t	pci_phys_mem_access_prot(struct file *file,
 					 pgprot_t prot);
 
 extern resource_size_t pcibios_io_space_offset(struct pci_controller *hose);
-extern void pcibios_setup_bus_devices(struct pci_bus *bus);
 extern void pcibios_setup_bus_self(struct pci_bus *bus);
 extern void pcibios_setup_phb_io_space(struct pci_controller *hose);
 extern void pcibios_scan_phb(struct pci_controller *hose);
diff --git a/arch/powerpc/include/asm/pgtable.h b/arch/powerpc/include/asm/pgtable.h
index 0e4ec8cc37b7..8cc543ed114c 100644
--- a/arch/powerpc/include/asm/pgtable.h
+++ b/arch/powerpc/include/asm/pgtable.h
@@ -94,12 +94,6 @@ void mark_initmem_nx(void);
 static inline void mark_initmem_nx(void) { }
 #endif
 
-#ifdef CONFIG_PPC_DEBUG_WX
-void ptdump_check_wx(void);
-#else
-static inline void ptdump_check_wx(void) { }
-#endif
-
 /*
  * When used, PTE_FRAG_NR is defined in subarch pgtable.h
  * so we are sure it is included when arriving here.
diff --git a/arch/powerpc/include/asm/pnv-pci.h b/arch/powerpc/include/asm/pnv-pci.h
index edcb1fc50aeb..d0ee0ede5767 100644
--- a/arch/powerpc/include/asm/pnv-pci.h
+++ b/arch/powerpc/include/asm/pnv-pci.h
@@ -15,6 +15,7 @@
 #define PCI_SLOT_ID_PREFIX	(1UL << 63)
 #define PCI_SLOT_ID(phb_id, bdfn)	\
 	(PCI_SLOT_ID_PREFIX | ((uint64_t)(bdfn) << 16) | (phb_id))
+#define PCI_PHB_SLOT_ID(phb_id)		(phb_id)
 
 extern int pnv_pci_get_slot_id(struct device_node *np, uint64_t *id);
 extern int pnv_pci_get_device_tree(uint32_t phandle, void *buf, uint64_t len);
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index a9993e7a443b..8387698bd5b6 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -163,6 +163,12 @@ struct thread_struct {
 #if defined(CONFIG_PPC_BOOK3S_32) && defined(CONFIG_PPC_KUAP)
 	unsigned long	kuap;		/* opened segments for user access */
 #endif
+#ifdef CONFIG_VMAP_STACK
+	unsigned long	srr0;
+	unsigned long	srr1;
+	unsigned long	dar;
+	unsigned long	dsisr;
+#endif
 	/* Debug Registers */
 	struct debug_reg debug;
 	struct thread_fp_state	fp_state;
@@ -412,6 +418,9 @@ static inline unsigned long get_clean_sp(unsigned long sp, int is_32)
 extern unsigned long isa300_idle_stop_noloss(unsigned long psscr_val);
 extern unsigned long isa300_idle_stop_mayloss(unsigned long psscr_val);
 extern unsigned long isa206_idle_insn_mayloss(unsigned long type);
+#ifdef CONFIG_PPC_970_NAP
+extern void power4_idle_nap(void);
+#endif
 
 extern unsigned long cpuidle_disable;
 enum idle_boot_override {IDLE_NO_OVERRIDE = 0, IDLE_POWERSAVE_OFF};
diff --git a/arch/powerpc/include/asm/reg_8xx.h b/arch/powerpc/include/asm/reg_8xx.h
index 07df35ee8cbc..299ee7be0f67 100644
--- a/arch/powerpc/include/asm/reg_8xx.h
+++ b/arch/powerpc/include/asm/reg_8xx.h
@@ -35,7 +35,21 @@
 #define SPRN_CMPE	152
 #define SPRN_CMPF	153
 #define SPRN_LCTRL1	156
+#define   LCTRL1_CTE_GT		0xc0000000
+#define   LCTRL1_CTF_LT		0x14000000
+#define   LCTRL1_CRWE_RW	0x00000000
+#define   LCTRL1_CRWE_RO	0x00040000
+#define   LCTRL1_CRWE_WO	0x000c0000
+#define   LCTRL1_CRWF_RW	0x00000000
+#define   LCTRL1_CRWF_RO	0x00010000
+#define   LCTRL1_CRWF_WO	0x00030000
 #define SPRN_LCTRL2	157
+#define   LCTRL2_LW0EN		0x80000000
+#define   LCTRL2_LW0LA_E	0x00000000
+#define   LCTRL2_LW0LA_F	0x04000000
+#define   LCTRL2_LW0LA_EandF	0x08000000
+#define   LCTRL2_LW0LADC	0x02000000
+#define   LCTRL2_SLW0EN		0x00000002
 #ifdef CONFIG_PPC_8xx
 #define SPRN_ICTRL	158
 #endif
diff --git a/arch/powerpc/include/asm/thread_info.h b/arch/powerpc/include/asm/thread_info.h
index 8e1d0195ac36..a2270749b282 100644
--- a/arch/powerpc/include/asm/thread_info.h
+++ b/arch/powerpc/include/asm/thread_info.h
@@ -10,13 +10,31 @@
 #define _ASM_POWERPC_THREAD_INFO_H
 
 #include <asm/asm-const.h>
+#include <asm/page.h>
 
 #ifdef __KERNEL__
 
+#if defined(CONFIG_VMAP_STACK) && CONFIG_THREAD_SHIFT < PAGE_SHIFT
+#define THREAD_SHIFT		PAGE_SHIFT
+#else
 #define THREAD_SHIFT		CONFIG_THREAD_SHIFT
+#endif
 
 #define THREAD_SIZE		(1 << THREAD_SHIFT)
 
+/*
+ * By aligning VMAP'd stacks to 2 * THREAD_SIZE, we can detect overflow by
+ * checking sp & (1 << THREAD_SHIFT), which we can do cheaply in the entry
+ * assembly.
+ */
+#ifdef CONFIG_VMAP_STACK
+#define THREAD_ALIGN_SHIFT	(THREAD_SHIFT + 1)
+#else
+#define THREAD_ALIGN_SHIFT	THREAD_SHIFT
+#endif
+
+#define THREAD_ALIGN		(1 << THREAD_ALIGN_SHIFT)
+
 #ifndef __ASSEMBLY__
 #include <linux/cache.h>
 #include <asm/processor.h>
diff --git a/arch/powerpc/include/asm/tlb.h b/arch/powerpc/include/asm/tlb.h
index b2c0be93929d..7f3a8b902325 100644
--- a/arch/powerpc/include/asm/tlb.h
+++ b/arch/powerpc/include/asm/tlb.h
@@ -26,6 +26,17 @@
 
 #define tlb_flush tlb_flush
 extern void tlb_flush(struct mmu_gather *tlb);
+/*
+ * book3s:
+ * Hash does not use the linux page-tables, so we can avoid
+ * the TLB invalidate for page-table freeing, Radix otoh does use the
+ * page-tables and needs the TLBI.
+ *
+ * nohash:
+ * We still do TLB invalidate in the __pte_free_tlb routine before we
+ * add the page table pages to mmu gather table batch.
+ */
+#define tlb_needs_table_invalidate()	radix_enabled()
 
 /* Get the generic bits... */
 #include <asm-generic/tlb.h>
diff --git a/arch/powerpc/include/asm/uaccess.h b/arch/powerpc/include/asm/uaccess.h
index c92fe7fe9692..2f500debae21 100644
--- a/arch/powerpc/include/asm/uaccess.h
+++ b/arch/powerpc/include/asm/uaccess.h
@@ -91,9 +91,14 @@ static inline int __access_ok(unsigned long addr, unsigned long size,
 	__put_user_check((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr)))
 
 #define __get_user(x, ptr) \
-	__get_user_nocheck((x), (ptr), sizeof(*(ptr)))
+	__get_user_nocheck((x), (ptr), sizeof(*(ptr)), true)
 #define __put_user(x, ptr) \
-	__put_user_nocheck((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr)))
+	__put_user_nocheck((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr)), true)
+
+#define __get_user_allowed(x, ptr) \
+	__get_user_nocheck((x), (ptr), sizeof(*(ptr)), false)
+#define __put_user_allowed(x, ptr) \
+	__put_user_nocheck((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr)), false)
 
 #define __get_user_inatomic(x, ptr) \
 	__get_user_nosleep((x), (ptr), sizeof(*(ptr)))
@@ -138,10 +143,9 @@ extern long __put_user_bad(void);
 		: "r" (x), "b" (addr), "i" (-EFAULT), "0" (err))
 #endif /* __powerpc64__ */
 
-#define __put_user_size(x, ptr, size, retval)			\
+#define __put_user_size_allowed(x, ptr, size, retval)		\
 do {								\
 	retval = 0;						\
-	allow_write_to_user(ptr, size);				\
 	switch (size) {						\
 	  case 1: __put_user_asm(x, ptr, retval, "stb"); break;	\
 	  case 2: __put_user_asm(x, ptr, retval, "sth"); break;	\
@@ -149,17 +153,26 @@ do {								\
 	  case 8: __put_user_asm2(x, ptr, retval); break;	\
 	  default: __put_user_bad();				\
 	}							\
+} while (0)
+
+#define __put_user_size(x, ptr, size, retval)			\
+do {								\
+	allow_write_to_user(ptr, size);				\
+	__put_user_size_allowed(x, ptr, size, retval);		\
 	prevent_write_to_user(ptr, size);			\
 } while (0)
 
-#define __put_user_nocheck(x, ptr, size)			\
+#define __put_user_nocheck(x, ptr, size, do_allow)			\
 ({								\
 	long __pu_err;						\
 	__typeof__(*(ptr)) __user *__pu_addr = (ptr);		\
 	if (!is_kernel_addr((unsigned long)__pu_addr))		\
 		might_fault();					\
 	__chk_user_ptr(ptr);					\
-	__put_user_size((x), __pu_addr, (size), __pu_err);	\
+	if (do_allow)								\
+		__put_user_size((x), __pu_addr, (size), __pu_err);		\
+	else									\
+		__put_user_size_allowed((x), __pu_addr, (size), __pu_err);	\
 	__pu_err;						\
 })
 
@@ -236,13 +249,12 @@ extern long __get_user_bad(void);
 		: "b" (addr), "i" (-EFAULT), "0" (err))
 #endif /* __powerpc64__ */
 
-#define __get_user_size(x, ptr, size, retval)			\
+#define __get_user_size_allowed(x, ptr, size, retval)		\
 do {								\
 	retval = 0;						\
 	__chk_user_ptr(ptr);					\
 	if (size > sizeof(x))					\
 		(x) = __get_user_bad();				\
-	allow_read_from_user(ptr, size);			\
 	switch (size) {						\
 	case 1: __get_user_asm(x, ptr, retval, "lbz"); break;	\
 	case 2: __get_user_asm(x, ptr, retval, "lhz"); break;	\
@@ -250,6 +262,12 @@ do {								\
 	case 8: __get_user_asm2(x, ptr, retval);  break;	\
 	default: (x) = __get_user_bad();			\
 	}							\
+} while (0)
+
+#define __get_user_size(x, ptr, size, retval)			\
+do {								\
+	allow_read_from_user(ptr, size);			\
+	__get_user_size_allowed(x, ptr, size, retval);		\
 	prevent_read_from_user(ptr, size);			\
 } while (0)
 
@@ -260,7 +278,7 @@ do {								\
 #define __long_type(x) \
 	__typeof__(__builtin_choose_expr(sizeof(x) > sizeof(0UL), 0ULL, 0UL))
 
-#define __get_user_nocheck(x, ptr, size)			\
+#define __get_user_nocheck(x, ptr, size, do_allow)			\
 ({								\
 	long __gu_err;						\
 	__long_type(*(ptr)) __gu_val;				\
@@ -269,7 +287,10 @@ do {								\
 	if (!is_kernel_addr((unsigned long)__gu_addr))		\
 		might_fault();					\
 	barrier_nospec();					\
-	__get_user_size(__gu_val, __gu_addr, (size), __gu_err);	\
+	if (do_allow)								\
+		__get_user_size(__gu_val, __gu_addr, (size), __gu_err);		\
+	else									\
+		__get_user_size_allowed(__gu_val, __gu_addr, (size), __gu_err);	\
 	(x) = (__typeof__(*(ptr)))__gu_val;			\
 	__gu_err;						\
 })
@@ -313,9 +334,9 @@ raw_copy_in_user(void __user *to, const void __user *from, unsigned long n)
 	unsigned long ret;
 
 	barrier_nospec();
-	allow_user_access(to, from, n);
+	allow_read_write_user(to, from, n);
 	ret = __copy_tofrom_user(to, from, n);
-	prevent_user_access(to, from, n);
+	prevent_read_write_user(to, from, n);
 	return ret;
 }
 #endif /* __powerpc64__ */
@@ -356,33 +377,40 @@ static inline unsigned long raw_copy_from_user(void *to,
 	return ret;
 }
 
-static inline unsigned long raw_copy_to_user(void __user *to,
-		const void *from, unsigned long n)
+static inline unsigned long
+raw_copy_to_user_allowed(void __user *to, const void *from, unsigned long n)
 {
-	unsigned long ret;
 	if (__builtin_constant_p(n) && (n <= 8)) {
-		ret = 1;
+		unsigned long ret = 1;
 
 		switch (n) {
 		case 1:
-			__put_user_size(*(u8 *)from, (u8 __user *)to, 1, ret);
+			__put_user_size_allowed(*(u8 *)from, (u8 __user *)to, 1, ret);
 			break;
 		case 2:
-			__put_user_size(*(u16 *)from, (u16 __user *)to, 2, ret);
+			__put_user_size_allowed(*(u16 *)from, (u16 __user *)to, 2, ret);
 			break;
 		case 4:
-			__put_user_size(*(u32 *)from, (u32 __user *)to, 4, ret);
+			__put_user_size_allowed(*(u32 *)from, (u32 __user *)to, 4, ret);
 			break;
 		case 8:
-			__put_user_size(*(u64 *)from, (u64 __user *)to, 8, ret);
+			__put_user_size_allowed(*(u64 *)from, (u64 __user *)to, 8, ret);
 			break;
 		}
 		if (ret == 0)
 			return 0;
 	}
 
+	return __copy_tofrom_user(to, (__force const void __user *)from, n);
+}
+
+static inline unsigned long
+raw_copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+	unsigned long ret;
+
 	allow_write_to_user(to, n);
-	ret = __copy_tofrom_user(to, (__force const void __user *)from, n);
+	ret = raw_copy_to_user_allowed(to, from, n);
 	prevent_write_to_user(to, n);
 	return ret;
 }
@@ -428,4 +456,22 @@ extern long __copy_from_user_flushcache(void *dst, const void __user *src,
 extern void memcpy_page_flushcache(char *to, struct page *page, size_t offset,
 			   size_t len);
 
+static __must_check inline bool user_access_begin(const void __user *ptr, size_t len)
+{
+	if (unlikely(!access_ok(ptr, len)))
+		return false;
+	allow_read_write_user((void __user *)ptr, ptr, len);
+	return true;
+}
+#define user_access_begin	user_access_begin
+#define user_access_end		prevent_current_access_user
+#define user_access_save	prevent_user_access_return
+#define user_access_restore	restore_user_access
+
+#define unsafe_op_wrap(op, err) do { if (unlikely(op)) goto err; } while (0)
+#define unsafe_get_user(x, p, e) unsafe_op_wrap(__get_user_allowed(x, p), e)
+#define unsafe_put_user(x, p, e) unsafe_op_wrap(__put_user_allowed(x, p), e)
+#define unsafe_copy_to_user(d, s, l, e) \
+	unsafe_op_wrap(raw_copy_to_user_allowed(d, s, l), e)
+
 #endif	/* _ARCH_POWERPC_UACCESS_H */
diff --git a/arch/powerpc/include/asm/vdso_datapage.h b/arch/powerpc/include/asm/vdso_datapage.h
index 40f13f3626d3..b9ef6cf50ea5 100644
--- a/arch/powerpc/include/asm/vdso_datapage.h
+++ b/arch/powerpc/include/asm/vdso_datapage.h
@@ -108,16 +108,22 @@ struct vdso_data {
 	__u32 stamp_sec_fraction;	/* fractional seconds of stamp_xtime */
 	__u32 hrtimer_res;		/* hrtimer resolution */
    	__u32 syscall_map_32[SYSCALL_MAP_SIZE]; /* map of syscalls */
-	__u32 dcache_block_size;	/* L1 d-cache block size     */
-	__u32 icache_block_size;	/* L1 i-cache block size     */
-	__u32 dcache_log_block_size;	/* L1 d-cache log block size */
-	__u32 icache_log_block_size;	/* L1 i-cache log block size */
 };
 
 #endif /* CONFIG_PPC64 */
 
 extern struct vdso_data *vdso_data;
 
+#else /* __ASSEMBLY__ */
+
+.macro get_datapage ptr, tmp
+	bcl	20, 31, .+4
+	mflr	\ptr
+	addi	\ptr, \ptr, (__kernel_datapage_offset - (.-4))@l
+	lwz	\tmp, 0(\ptr)
+	add	\ptr, \tmp, \ptr
+.endm
+
 #endif /* __ASSEMBLY__ */
 
 #endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/xive.h b/arch/powerpc/include/asm/xive.h
index 24cdf97376c4..93f982dbb3d4 100644
--- a/arch/powerpc/include/asm/xive.h
+++ b/arch/powerpc/include/asm/xive.h
@@ -87,56 +87,56 @@ extern bool __xive_enabled;
 
 static inline bool xive_enabled(void) { return __xive_enabled; }
 
-extern bool xive_spapr_init(void);
-extern bool xive_native_init(void);
-extern void xive_smp_probe(void);
-extern int  xive_smp_prepare_cpu(unsigned int cpu);
-extern void xive_smp_setup_cpu(void);
-extern void xive_smp_disable_cpu(void);
-extern void xive_teardown_cpu(void);
-extern void xive_shutdown(void);
-extern void xive_flush_interrupt(void);
+bool xive_spapr_init(void);
+bool xive_native_init(void);
+void xive_smp_probe(void);
+int  xive_smp_prepare_cpu(unsigned int cpu);
+void xive_smp_setup_cpu(void);
+void xive_smp_disable_cpu(void);
+void xive_teardown_cpu(void);
+void xive_shutdown(void);
+void xive_flush_interrupt(void);
 
 /* xmon hook */
-extern void xmon_xive_do_dump(int cpu);
-extern int xmon_xive_get_irq_config(u32 hw_irq, struct irq_data *d);
+void xmon_xive_do_dump(int cpu);
+int xmon_xive_get_irq_config(u32 hw_irq, struct irq_data *d);
 
 /* APIs used by KVM */
-extern u32 xive_native_default_eq_shift(void);
-extern u32 xive_native_alloc_vp_block(u32 max_vcpus);
-extern void xive_native_free_vp_block(u32 vp_base);
-extern int xive_native_populate_irq_data(u32 hw_irq,
-					 struct xive_irq_data *data);
-extern void xive_cleanup_irq_data(struct xive_irq_data *xd);
-extern u32 xive_native_alloc_irq(void);
-extern void xive_native_free_irq(u32 irq);
-extern int xive_native_configure_irq(u32 hw_irq, u32 target, u8 prio, u32 sw_irq);
-
-extern int xive_native_configure_queue(u32 vp_id, struct xive_q *q, u8 prio,
-				       __be32 *qpage, u32 order, bool can_escalate);
-extern void xive_native_disable_queue(u32 vp_id, struct xive_q *q, u8 prio);
-
-extern void xive_native_sync_source(u32 hw_irq);
-extern void xive_native_sync_queue(u32 hw_irq);
-extern bool is_xive_irq(struct irq_chip *chip);
-extern int xive_native_enable_vp(u32 vp_id, bool single_escalation);
-extern int xive_native_disable_vp(u32 vp_id);
-extern int xive_native_get_vp_info(u32 vp_id, u32 *out_cam_id, u32 *out_chip_id);
-extern bool xive_native_has_single_escalation(void);
-
-extern int xive_native_get_queue_info(u32 vp_id, uint32_t prio,
-				      u64 *out_qpage,
-				      u64 *out_qsize,
-				      u64 *out_qeoi_page,
-				      u32 *out_escalate_irq,
-				      u64 *out_qflags);
-
-extern int xive_native_get_queue_state(u32 vp_id, uint32_t prio, u32 *qtoggle,
-				       u32 *qindex);
-extern int xive_native_set_queue_state(u32 vp_id, uint32_t prio, u32 qtoggle,
-				       u32 qindex);
-extern int xive_native_get_vp_state(u32 vp_id, u64 *out_state);
-extern bool xive_native_has_queue_state_support(void);
+u32 xive_native_default_eq_shift(void);
+u32 xive_native_alloc_vp_block(u32 max_vcpus);
+void xive_native_free_vp_block(u32 vp_base);
+int xive_native_populate_irq_data(u32 hw_irq,
+				  struct xive_irq_data *data);
+void xive_cleanup_irq_data(struct xive_irq_data *xd);
+u32 xive_native_alloc_irq(void);
+void xive_native_free_irq(u32 irq);
+int xive_native_configure_irq(u32 hw_irq, u32 target, u8 prio, u32 sw_irq);
+
+int xive_native_configure_queue(u32 vp_id, struct xive_q *q, u8 prio,
+				__be32 *qpage, u32 order, bool can_escalate);
+void xive_native_disable_queue(u32 vp_id, struct xive_q *q, u8 prio);
+
+void xive_native_sync_source(u32 hw_irq);
+void xive_native_sync_queue(u32 hw_irq);
+bool is_xive_irq(struct irq_chip *chip);
+int xive_native_enable_vp(u32 vp_id, bool single_escalation);
+int xive_native_disable_vp(u32 vp_id);
+int xive_native_get_vp_info(u32 vp_id, u32 *out_cam_id, u32 *out_chip_id);
+bool xive_native_has_single_escalation(void);
+
+int xive_native_get_queue_info(u32 vp_id, uint32_t prio,
+			       u64 *out_qpage,
+			       u64 *out_qsize,
+			       u64 *out_qeoi_page,
+			       u32 *out_escalate_irq,
+			       u64 *out_qflags);
+
+int xive_native_get_queue_state(u32 vp_id, uint32_t prio, u32 *qtoggle,
+				u32 *qindex);
+int xive_native_set_queue_state(u32 vp_id, uint32_t prio, u32 qtoggle,
+				u32 qindex);
+int xive_native_get_vp_state(u32 vp_id, u64 *out_state);
+bool xive_native_has_queue_state_support(void);
 
 #else
 
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 157b0147921f..78a1b22d4fd8 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -62,8 +62,7 @@ obj-$(CONFIG_PPC_BOOK3E_64)	+= exceptions-64e.o idle_book3e.o
 obj-$(CONFIG_PPC_BARRIER_NOSPEC) += security.o
 obj-$(CONFIG_PPC64)		+= vdso64/
 obj-$(CONFIG_ALTIVEC)		+= vecemu.o
-obj-$(CONFIG_PPC_970_NAP)	+= idle_power4.o
-obj-$(CONFIG_PPC_P7_NAP)	+= idle_book3s.o
+obj-$(CONFIG_PPC_BOOK3S_IDLE)	+= idle_book3s.o
 procfs-y			:= proc_powerpc.o
 obj-$(CONFIG_PROC_FS)		+= $(procfs-y)
 rtaspci-$(CONFIG_PPC64)-$(CONFIG_PCI)	:= rtas_pci.o
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index 3d47aec7becf..c25e562f1cd9 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -127,6 +127,12 @@ int main(void)
 	OFFSET(KSP_VSID, thread_struct, ksp_vsid);
 #else /* CONFIG_PPC64 */
 	OFFSET(PGDIR, thread_struct, pgdir);
+#ifdef CONFIG_VMAP_STACK
+	OFFSET(SRR0, thread_struct, srr0);
+	OFFSET(SRR1, thread_struct, srr1);
+	OFFSET(DAR, thread_struct, dar);
+	OFFSET(DSISR, thread_struct, dsisr);
+#endif
 #ifdef CONFIG_SPE
 	OFFSET(THREAD_EVR0, thread_struct, evr[0]);
 	OFFSET(THREAD_ACC, thread_struct, acc);
@@ -389,11 +395,11 @@ int main(void)
 	OFFSET(STAMP_XTIME_NSEC, vdso_data, stamp_xtime_nsec);
 	OFFSET(STAMP_SEC_FRAC, vdso_data, stamp_sec_fraction);
 	OFFSET(CLOCK_HRTIMER_RES, vdso_data, hrtimer_res);
+#ifdef CONFIG_PPC64
 	OFFSET(CFG_ICACHE_BLOCKSZ, vdso_data, icache_block_size);
 	OFFSET(CFG_DCACHE_BLOCKSZ, vdso_data, dcache_block_size);
 	OFFSET(CFG_ICACHE_LOGBLOCKSZ, vdso_data, icache_log_block_size);
 	OFFSET(CFG_DCACHE_LOGBLOCKSZ, vdso_data, dcache_log_block_size);
-#ifdef CONFIG_PPC64
 	OFFSET(CFG_SYSCALL_MAP64, vdso_data, syscall_map_64);
 	OFFSET(TVAL64_TV_SEC, __kernel_old_timeval, tv_sec);
 	OFFSET(TVAL64_TV_USEC, __kernel_old_timeval, tv_usec);
@@ -413,7 +419,10 @@ int main(void)
 	DEFINE(CLOCK_MONOTONIC, CLOCK_MONOTONIC);
 	DEFINE(CLOCK_REALTIME_COARSE, CLOCK_REALTIME_COARSE);
 	DEFINE(CLOCK_MONOTONIC_COARSE, CLOCK_MONOTONIC_COARSE);
+	DEFINE(CLOCK_MAX, CLOCK_TAI);
 	DEFINE(NSEC_PER_SEC, NSEC_PER_SEC);
+	DEFINE(EINVAL, EINVAL);
+	DEFINE(KTIME_LOW_RES, KTIME_LOW_RES);
 
 #ifdef CONFIG_BUG
 	DEFINE(BUG_ENTRY_SIZE, sizeof(struct bug_entry));
diff --git a/arch/powerpc/kernel/dt_cpu_ftrs.c b/arch/powerpc/kernel/dt_cpu_ftrs.c
index 180b3a5d1001..182b4047c1ef 100644
--- a/arch/powerpc/kernel/dt_cpu_ftrs.c
+++ b/arch/powerpc/kernel/dt_cpu_ftrs.c
@@ -727,17 +727,20 @@ static __init void cpufeatures_cpu_quirks(void)
 	/*
 	 * Not all quirks can be derived from the cpufeatures device tree.
 	 */
-	if ((version & 0xffffefff) == 0x004e0200)
-		; /* DD2.0 has no feature flag */
-	else if ((version & 0xffffefff) == 0x004e0201)
+	if ((version & 0xffffefff) == 0x004e0200) {
+		/* DD2.0 has no feature flag */
+		cur_cpu_spec->cpu_features |= CPU_FTR_P9_RADIX_PREFETCH_BUG;
+	} else if ((version & 0xffffefff) == 0x004e0201) {
 		cur_cpu_spec->cpu_features |= CPU_FTR_POWER9_DD2_1;
-	else if ((version & 0xffffefff) == 0x004e0202) {
+		cur_cpu_spec->cpu_features |= CPU_FTR_P9_RADIX_PREFETCH_BUG;
+	} else if ((version & 0xffffefff) == 0x004e0202) {
 		cur_cpu_spec->cpu_features |= CPU_FTR_P9_TM_HV_ASSIST;
 		cur_cpu_spec->cpu_features |= CPU_FTR_P9_TM_XER_SO_BUG;
 		cur_cpu_spec->cpu_features |= CPU_FTR_POWER9_DD2_1;
-	} else if ((version & 0xffff0000) == 0x004e0000)
+	} else if ((version & 0xffff0000) == 0x004e0000) {
 		/* DD2.1 and up have DD2_1 */
 		cur_cpu_spec->cpu_features |= CPU_FTR_POWER9_DD2_1;
+	}
 
 	if ((version & 0xffff0000) == 0x004e0000) {
 		cur_cpu_spec->cpu_features &= ~(CPU_FTR_DAWR);
diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c
index bc8a551013be..17cb3e9b5697 100644
--- a/arch/powerpc/kernel/eeh.c
+++ b/arch/powerpc/kernel/eeh.c
@@ -503,7 +503,7 @@ int eeh_dev_check_failure(struct eeh_dev *edev)
 	rc = 1;
 	if (pe->state & EEH_PE_ISOLATED) {
 		pe->check_count++;
-		if (pe->check_count % EEH_MAX_FAILS == 0) {
+		if (pe->check_count == EEH_MAX_FAILS) {
 			dn = pci_device_to_OF_node(dev);
 			if (dn)
 				location = of_get_property(dn, "ibm,loc-code",
@@ -1191,7 +1191,6 @@ void eeh_add_device_late(struct pci_dev *dev)
 		eeh_rmv_from_parent_pe(edev);
 		eeh_addr_cache_rmv_dev(edev->pdev);
 		eeh_sysfs_remove_device(edev->pdev);
-		edev->mode &= ~EEH_DEV_SYSFS;
 
 		/*
 		 * We definitely should have the PCI device removed
@@ -1296,17 +1295,11 @@ void eeh_remove_device(struct pci_dev *dev)
 	edev->pdev = NULL;
 
 	/*
-	 * The flag "in_error" is used to trace EEH devices for VFs
-	 * in error state or not. It's set in eeh_report_error(). If
-	 * it's not set, eeh_report_{reset,resume}() won't be called
-	 * for the VF EEH device.
+	 * eeh_sysfs_remove_device() uses pci_dev_to_eeh_dev() so we need to
+	 * remove the sysfs files before clearing dev.archdata.edev
 	 */
-	edev->in_error = false;
-	dev->dev.archdata.edev = NULL;
-	if (!(edev->pe->state & EEH_PE_KEEP))
-		eeh_rmv_from_parent_pe(edev);
-	else
-		edev->mode |= EEH_DEV_DISCONNECTED;
+	if (edev->mode & EEH_DEV_SYSFS)
+		eeh_sysfs_remove_device(dev);
 
 	/*
 	 * We're removing from the PCI subsystem, that means
@@ -1317,8 +1310,19 @@ void eeh_remove_device(struct pci_dev *dev)
 	edev->mode |= EEH_DEV_NO_HANDLER;
 
 	eeh_addr_cache_rmv_dev(dev);
-	eeh_sysfs_remove_device(dev);
-	edev->mode &= ~EEH_DEV_SYSFS;
+
+	/*
+	 * The flag "in_error" is used to trace EEH devices for VFs
+	 * in error state or not. It's set in eeh_report_error(). If
+	 * it's not set, eeh_report_{reset,resume}() won't be called
+	 * for the VF EEH device.
+	 */
+	edev->in_error = false;
+	dev->dev.archdata.edev = NULL;
+	if (!(edev->pe->state & EEH_PE_KEEP))
+		eeh_rmv_from_parent_pe(edev);
+	else
+		edev->mode |= EEH_DEV_DISCONNECTED;
 }
 
 int eeh_unfreeze_pe(struct eeh_pe *pe)
diff --git a/arch/powerpc/kernel/eeh_cache.c b/arch/powerpc/kernel/eeh_cache.c
index cf11277ebd02..6b50bf15d8c1 100644
--- a/arch/powerpc/kernel/eeh_cache.c
+++ b/arch/powerpc/kernel/eeh_cache.c
@@ -159,18 +159,10 @@ eeh_addr_cache_insert(struct pci_dev *dev, resource_size_t alo,
 
 static void __eeh_addr_cache_insert_dev(struct pci_dev *dev)
 {
-	struct pci_dn *pdn;
 	struct eeh_dev *edev;
 	int i;
 
-	pdn = pci_get_pdn_by_devfn(dev->bus, dev->devfn);
-	if (!pdn) {
-		pr_warn("PCI: no pci dn found for dev=%s\n",
-			pci_name(dev));
-		return;
-	}
-
-	edev = pdn_to_eeh_dev(pdn);
+	edev = pci_dev_to_eeh_dev(dev);
 	if (!edev) {
 		pr_warn("PCI: no EEH dev found for %s\n",
 			pci_name(dev));
diff --git a/arch/powerpc/kernel/eeh_driver.c b/arch/powerpc/kernel/eeh_driver.c
index 3dd1a422fc29..a1eaffe868de 100644
--- a/arch/powerpc/kernel/eeh_driver.c
+++ b/arch/powerpc/kernel/eeh_driver.c
@@ -525,12 +525,6 @@ static void eeh_rmv_device(struct eeh_dev *edev, void *userdata)
 
 		pci_iov_remove_virtfn(edev->physfn, pdn->vf_index);
 		edev->pdev = NULL;
-
-		/*
-		 * We have to set the VF PE number to invalid one, which is
-		 * required to plug the VF successfully.
-		 */
-		pdn->pe_number = IODA_INVALID_PE;
 #endif
 		if (rmv_data)
 			list_add(&edev->rmv_entry, &rmv_data->removed_vf_list);
diff --git a/arch/powerpc/kernel/eeh_sysfs.c b/arch/powerpc/kernel/eeh_sysfs.c
index ab44d965a53c..4fb0f1e1017a 100644
--- a/arch/powerpc/kernel/eeh_sysfs.c
+++ b/arch/powerpc/kernel/eeh_sysfs.c
@@ -14,7 +14,7 @@
 /**
  * EEH_SHOW_ATTR -- Create sysfs entry for eeh statistic
  * @_name: name of file in sysfs directory
- * @_memb: name of member in struct pci_dn to access
+ * @_memb: name of member in struct eeh_dev to access
  * @_format: printf format for display
  *
  * All of the attributes look very similar, so just
@@ -75,7 +75,7 @@ static ssize_t eeh_pe_state_store(struct device *dev,
 
 static DEVICE_ATTR_RW(eeh_pe_state);
 
-#ifdef CONFIG_PCI_IOV
+#if defined(CONFIG_PCI_IOV) && defined(CONFIG_PPC_PSERIES)
 static ssize_t eeh_notify_resume_show(struct device *dev,
 				      struct device_attribute *attr, char *buf)
 {
@@ -86,7 +86,6 @@ static ssize_t eeh_notify_resume_show(struct device *dev,
 	if (!edev || !edev->pe)
 		return -ENODEV;
 
-	pdn = pci_get_pdn(pdev);
 	return sprintf(buf, "%d\n", pdn->last_allow_rc);
 }
 
@@ -132,7 +131,7 @@ static void eeh_notify_resume_remove(struct pci_dev *pdev)
 #else
 static inline int eeh_notify_resume_add(struct pci_dev *pdev) { return 0; }
 static inline void eeh_notify_resume_remove(struct pci_dev *pdev) { }
-#endif /* CONFIG_PCI_IOV */
+#endif /* CONFIG_PCI_IOV && CONFIG PPC_PSERIES*/
 
 void eeh_sysfs_add_device(struct pci_dev *pdev)
 {
@@ -160,22 +159,23 @@ void eeh_sysfs_remove_device(struct pci_dev *pdev)
 {
 	struct eeh_dev *edev = pci_dev_to_eeh_dev(pdev);
 
+	if (!edev) {
+		WARN_ON(eeh_enabled());
+		return;
+	}
+
+	edev->mode &= ~EEH_DEV_SYSFS;
+
 	/*
 	 * The parent directory might have been removed. We needn't
 	 * continue for that case.
 	 */
-	if (!pdev->dev.kobj.sd) {
-		if (edev)
-			edev->mode &= ~EEH_DEV_SYSFS;
+	if (!pdev->dev.kobj.sd)
 		return;
-	}
 
 	device_remove_file(&pdev->dev, &dev_attr_eeh_mode);
 	device_remove_file(&pdev->dev, &dev_attr_eeh_pe_config_addr);
 	device_remove_file(&pdev->dev, &dev_attr_eeh_pe_state);
 
 	eeh_notify_resume_remove(pdev);
-
-	if (edev)
-		edev->mode &= ~EEH_DEV_SYSFS;
 }
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index e1a4c39b83b8..0713daa651d9 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -140,6 +140,7 @@ transfer_to_handler:
 	stw	r12,_CTR(r11)
 	stw	r2,_XER(r11)
 	mfspr	r12,SPRN_SPRG_THREAD
+	tovirt_vmstack r12, r12
 	beq	2f			/* if from user, fix up THREAD.regs */
 	addi	r2, r12, -THREAD
 	addi	r11,r1,STACK_FRAME_OVERHEAD
@@ -179,11 +180,13 @@ transfer_to_handler:
 2:	/* if from kernel, check interrupted DOZE/NAP mode and
          * check for stack overflow
          */
-	kuap_save_and_lock r11, r12, r9, r2, r0
+	kuap_save_and_lock r11, r12, r9, r2, r6
 	addi	r2, r12, -THREAD
+#ifndef CONFIG_VMAP_STACK
 	lwz	r9,KSP_LIMIT(r12)
 	cmplw	r1,r9			/* if r1 <= ksp_limit */
 	ble-	stack_ovf		/* then the kernel stack overflowed */
+#endif
 5:
 #if defined(CONFIG_PPC_BOOK3S_32) || defined(CONFIG_E500)
 	lwz	r12,TI_LOCAL_FLAGS(r2)
@@ -195,7 +198,8 @@ transfer_to_handler:
 transfer_to_handler_cont:
 3:
 	mflr	r9
-	tovirt(r2, r2)			/* set r2 to current */
+	tovirt_novmstack r2, r2 	/* set r2 to current */
+	tovirt_vmstack r9, r9
 	lwz	r11,0(r9)		/* virtual address of handler */
 	lwz	r9,4(r9)		/* where to go when done */
 #if defined(CONFIG_PPC_8xx) && defined(CONFIG_PERF_EVENTS)
@@ -210,7 +214,7 @@ transfer_to_handler_cont:
 	 * To speed up the syscall path where interrupts stay on, let's check
 	 * first if we are changing the MSR value at all.
 	 */
-	tophys(r12, r1)
+	tophys_novmstack r12, r1
 	lwz	r12,_MSR(r12)
 	andi.	r12,r12,MSR_EE
 	bne	1f
@@ -284,9 +288,11 @@ reenable_mmu:
 	rlwinm	r9,r9,0,~MSR_EE
 	lwz	r12,_LINK(r11)		/* and return to address in LR */
 	kuap_restore r11, r2, r3, r4, r5
+	lwz	r2, GPR2(r11)
 	b	fast_exception_return
 #endif
 
+#ifndef CONFIG_VMAP_STACK
 /*
  * On kernel stack overflow, load up an initial stack pointer
  * and call StackOverflow(regs), which should not return.
@@ -312,6 +318,7 @@ stack_ovf:
 	mtspr	SPRN_SRR1,r10
 	SYNC
 	RFI
+#endif
 
 #ifdef CONFIG_TRACE_IRQFLAGS
 trace_syscall_entry_irq_off:
@@ -397,7 +404,7 @@ ret_from_syscall:
 	LOAD_REG_IMMEDIATE(r10,MSR_KERNEL)	/* doesn't include MSR_EE */
 	/* Note: We don't bother telling lockdep about it */
 	SYNC
-	MTMSRD(r10)
+	mtmsr	r10
 	lwz	r9,TI_FLAGS(r2)
 	li	r8,-MAX_ERRNO
 	andi.	r0,r9,(_TIF_SYSCALL_DOTRACE|_TIF_SINGLESTEP|_TIF_USER_WORK_MASK|_TIF_PERSYSCALL_MASK)
@@ -554,7 +561,7 @@ syscall_exit_work:
 	 */
 	ori	r10,r10,MSR_EE
 	SYNC
-	MTMSRD(r10)
+	mtmsr	r10
 
 	/* Save NVGPRS if they're not saved already */
 	lwz	r4,_TRAP(r1)
@@ -621,7 +628,6 @@ ppc_swapcontext:
  */
 	.globl	handle_page_fault
 handle_page_fault:
-	stw	r4,_DAR(r1)
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 #ifdef CONFIG_PPC_BOOK3S_32
 	andis.  r0,r5,DSISR_DABRMATCH@h
@@ -697,7 +703,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_SPE)
 	and.	r0,r0,r11	/* FP or altivec or SPE enabled? */
 	beq+	1f
 	andc	r11,r11,r0
-	MTMSRD(r11)
+	mtmsr	r11
 	isync
 1:	stw	r11,_MSR(r1)
 	mfcr	r10
@@ -831,7 +837,7 @@ ret_from_except:
 	/* Note: We don't bother telling lockdep about it */
 	LOAD_REG_IMMEDIATE(r10,MSR_KERNEL)
 	SYNC			/* Some chip revs have problems here... */
-	MTMSRD(r10)		/* disable interrupts */
+	mtmsr	r10		/* disable interrupts */
 
 	lwz	r3,_MSR(r1)	/* Returning to user mode? */
 	andi.	r0,r3,MSR_PR
@@ -998,7 +1004,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRED_STWCX)
 	 */
 	LOAD_REG_IMMEDIATE(r10,MSR_KERNEL & ~MSR_RI)
 	SYNC
-	MTMSRD(r10)		/* clear the RI bit */
+	mtmsr	r10		/* clear the RI bit */
 	.globl exc_exit_restart
 exc_exit_restart:
 	lwz	r12,_NIP(r1)
@@ -1234,7 +1240,7 @@ do_resched:			/* r10 contains MSR_KERNEL here */
 #endif
 	ori	r10,r10,MSR_EE
 	SYNC
-	MTMSRD(r10)		/* hard-enable interrupts */
+	mtmsr	r10		/* hard-enable interrupts */
 	bl	schedule
 recheck:
 	/* Note: And we don't tell it we are disabling them again
@@ -1243,7 +1249,7 @@ recheck:
 	 */
 	LOAD_REG_IMMEDIATE(r10,MSR_KERNEL)
 	SYNC
-	MTMSRD(r10)		/* disable interrupts */
+	mtmsr	r10		/* disable interrupts */
 	lwz	r9,TI_FLAGS(r2)
 	andi.	r0,r9,_TIF_NEED_RESCHED
 	bne-	do_resched
@@ -1252,7 +1258,7 @@ recheck:
 do_user_signal:			/* r10 contains MSR_KERNEL here */
 	ori	r10,r10,MSR_EE
 	SYNC
-	MTMSRD(r10)		/* hard-enable interrupts */
+	mtmsr	r10		/* hard-enable interrupts */
 	/* save r13-r31 in the exception frame, if not already done */
 	lwz	r3,_TRAP(r1)
 	andi.	r0,r3,1
@@ -1334,14 +1340,14 @@ _GLOBAL(enter_rtas)
 	lis	r6,1f@ha	/* physical return address for rtas */
 	addi	r6,r6,1f@l
 	tophys(r6,r6)
-	tophys(r7,r1)
+	tophys_novmstack r7, r1
 	lwz	r8,RTASENTRY(r4)
 	lwz	r4,RTASBASE(r4)
 	mfmsr	r9
 	stw	r9,8(r1)
 	LOAD_REG_IMMEDIATE(r0,MSR_KERNEL)
 	SYNC			/* disable interrupts so SRR0/1 */
-	MTMSRD(r0)		/* don't get trashed */
+	mtmsr	r0		/* don't get trashed */
 	li	r9,MSR_KERNEL & ~(MSR_IR|MSR_DR)
 	mtlr	r6
 	stw	r7, THREAD + RTAS_SP(r2)
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index a9a1d3cdb523..6ba675b0cf7d 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -597,8 +597,7 @@ _GLOBAL(_switch)
 	std	r0,16(r1)
 	stdu	r1,-SWITCH_FRAME_SIZE(r1)
 	/* r3-r13 are caller saved -- Cort */
-	SAVE_8GPRS(14, r1)
-	SAVE_10GPRS(22, r1)
+	SAVE_NVGPRS(r1)
 	std	r0,_NIP(r1)	/* Return to switch caller */
 	mfcr	r23
 	std	r23,_CCR(r1)
@@ -722,8 +721,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_207S)
 	mtcrf	0xFF,r6
 
 	/* r3-r13 are destroyed -- Cort */
-	REST_8GPRS(14, r1)
-	REST_10GPRS(22, r1)
+	REST_NVGPRS(r1)
 
 	/* convert old thread to its task_struct for return value */
 	addi	r3,r3,-THREAD
@@ -1155,8 +1153,7 @@ _GLOBAL(enter_rtas)
    	 */
 	SAVE_GPR(2, r1)			/* Save the TOC */
 	SAVE_GPR(13, r1)		/* Save paca */
-	SAVE_8GPRS(14, r1)		/* Save the non-volatiles */
-	SAVE_10GPRS(22, r1)		/* ditto */
+	SAVE_NVGPRS(r1)			/* Save the non-volatiles */
 
 	mfcr	r4
 	std	r4,_CCR(r1)
@@ -1263,8 +1260,7 @@ rtas_restore_regs:
 	/* relocation is on at this point */
 	REST_GPR(2, r1)			/* Restore the TOC */
 	REST_GPR(13, r1)		/* Restore paca */
-	REST_8GPRS(14, r1)		/* Restore the non-volatiles */
-	REST_10GPRS(22, r1)		/* ditto */
+	REST_NVGPRS(r1)			/* Restore the non-volatiles */
 
 	GET_PACA(r13)
 
@@ -1298,8 +1294,7 @@ _GLOBAL(enter_prom)
    	 */
 	SAVE_GPR(2, r1)
 	SAVE_GPR(13, r1)
-	SAVE_8GPRS(14, r1)
-	SAVE_10GPRS(22, r1)
+	SAVE_NVGPRS(r1)
 	mfcr	r10
 	mfmsr	r11
 	std	r10,_CCR(r1)
@@ -1343,8 +1338,7 @@ _GLOBAL(enter_prom)
 	/* Restore other registers */
 	REST_GPR(2, r1)
 	REST_GPR(13, r1)
-	REST_8GPRS(14, r1)
-	REST_10GPRS(22, r1)
+	REST_NVGPRS(r1)
 	ld	r4,_CCR(r1)
 	mtcr	r4
 
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 46508b148e16..ffc15f4f079d 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -1408,22 +1408,9 @@ EXC_VIRT_NONE(0x4b00, 0x100)
  *
  * Call convention:
  *
- * syscall register convention is in Documentation/powerpc/syscall64-abi.rst
- *
- * For hypercalls, the register convention is as follows:
- * r0 volatile
- * r1-2 nonvolatile
- * r3 volatile parameter and return value for status
- * r4-r10 volatile input and output value
- * r11 volatile hypercall number and output value
- * r12 volatile input and output value
- * r13-r31 nonvolatile
- * LR nonvolatile
- * CTR volatile
- * XER volatile
- * CR0-1 CR5-7 volatile
- * CR2-4 nonvolatile
- * Other registers nonvolatile
+ * syscall and hypercalls register conventions are documented in
+ * Documentation/powerpc/syscall64-abi.rst and
+ * Documentation/powerpc/papr_hcalls.rst respectively.
  *
  * The intersection of volatile registers that don't contain possible
  * inputs is: cr0, xer, ctr. We may use these as scratch regs upon entry
@@ -2208,11 +2195,20 @@ __end_interrupts:
 DEFINE_FIXED_SYMBOL(__end_interrupts)
 
 #ifdef CONFIG_PPC_970_NAP
+	/*
+	 * Called by exception entry code if _TLF_NAPPING was set, this clears
+	 * the NAPPING flag, and redirects the exception exit to
+	 * power4_fixup_nap_return.
+	 */
+	.globl power4_fixup_nap
 EXC_COMMON_BEGIN(power4_fixup_nap)
 	andc	r9,r9,r10
 	std	r9,TI_LOCAL_FLAGS(r11)
-	ld	r10,_LINK(r1)		/* make idle task do the */
-	std	r10,_NIP(r1)		/* equivalent of a blr */
+	LOAD_REG_ADDR(r10, power4_idle_nap_return)
+	std	r10,_NIP(r1)
+	blr
+
+power4_idle_nap_return:
 	blr
 #endif
 
diff --git a/arch/powerpc/kernel/fpu.S b/arch/powerpc/kernel/fpu.S
index 0bb991ddd264..3235a8da6af7 100644
--- a/arch/powerpc/kernel/fpu.S
+++ b/arch/powerpc/kernel/fpu.S
@@ -94,6 +94,9 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX)
 	/* enable use of FP after return */
 #ifdef CONFIG_PPC32
 	mfspr	r5,SPRN_SPRG_THREAD	/* current task's THREAD (phys) */
+#ifdef CONFIG_VMAP_STACK
+	tovirt(r5, r5)
+#endif
 	lwz	r4,THREAD_FPEXC_MODE(r5)
 	ori	r9,r9,MSR_FP		/* enable FP for current */
 	or	r9,r9,r4
diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S
index 4a24f8f026c7..0493fcac6409 100644
--- a/arch/powerpc/kernel/head_32.S
+++ b/arch/powerpc/kernel/head_32.S
@@ -272,16 +272,21 @@ __secondary_hold_acknowledge:
  */
 	. = 0x200
 	DO_KVM  0x200
-	mtspr	SPRN_SPRG_SCRATCH0,r10
-	mtspr	SPRN_SPRG_SCRATCH1,r11
-	mfcr	r10
+MachineCheck:
+	EXCEPTION_PROLOG_0
+#ifdef CONFIG_VMAP_STACK
+	li	r11, MSR_KERNEL & ~(MSR_IR | MSR_RI) /* can take DTLB miss */
+	mtmsr	r11
+	isync
+#endif
 #ifdef CONFIG_PPC_CHRP
 	mfspr	r11, SPRN_SPRG_THREAD
+	tovirt_vmstack r11, r11
 	lwz	r11, RTAS_SP(r11)
 	cmpwi	cr1, r11, 0
 	bne	cr1, 7f
 #endif /* CONFIG_PPC_CHRP */
-	EXCEPTION_PROLOG_1
+	EXCEPTION_PROLOG_1 for_rtas=1
 7:	EXCEPTION_PROLOG_2
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 #ifdef CONFIG_PPC_CHRP
@@ -296,24 +301,21 @@ __secondary_hold_acknowledge:
 	. = 0x300
 	DO_KVM  0x300
 DataAccess:
-	EXCEPTION_PROLOG
-	mfspr	r10,SPRN_DSISR
-	stw	r10,_DSISR(r11)
+	EXCEPTION_PROLOG handle_dar_dsisr=1
+	get_and_save_dar_dsisr_on_stack	r4, r5, r11
+BEGIN_MMU_FTR_SECTION
 #ifdef CONFIG_PPC_KUAP
-	andis.	r0,r10,(DSISR_BAD_FAULT_32S | DSISR_DABRMATCH | DSISR_PROTFAULT)@h
+	andis.	r0, r5, (DSISR_BAD_FAULT_32S | DSISR_DABRMATCH | DSISR_PROTFAULT)@h
 #else
-	andis.	r0,r10,(DSISR_BAD_FAULT_32S|DSISR_DABRMATCH)@h
+	andis.	r0, r5, (DSISR_BAD_FAULT_32S | DSISR_DABRMATCH)@h
 #endif
-	bne	1f			/* if not, try to put a PTE */
-	mfspr	r4,SPRN_DAR		/* into the hash table */
-	rlwinm	r3,r10,32-15,21,21	/* DSISR_STORE -> _PAGE_RW */
-BEGIN_MMU_FTR_SECTION
+	bne	handle_page_fault_tramp_2	/* if not, try to put a PTE */
+	rlwinm	r3, r5, 32 - 15, 21, 21		/* DSISR_STORE -> _PAGE_RW */
 	bl	hash_page
-END_MMU_FTR_SECTION_IFSET(MMU_FTR_HPTE_TABLE)
-1:	lwz	r5,_DSISR(r11)		/* get DSISR value */
-	mfspr	r4,SPRN_DAR
-	EXC_XFER_LITE(0x300, handle_page_fault)
-
+	b	handle_page_fault_tramp_1
+FTR_SECTION_ELSE
+	b	handle_page_fault_tramp_2
+ALT_MMU_FTR_SECTION_END_IFSET(MMU_FTR_HPTE_TABLE)
 
 /* Instruction access exception. */
 	. = 0x400
@@ -329,6 +331,7 @@ BEGIN_MMU_FTR_SECTION
 END_MMU_FTR_SECTION_IFSET(MMU_FTR_HPTE_TABLE)
 1:	mr	r4,r12
 	andis.	r5,r9,DSISR_SRR1_MATCH_32S@h /* Filter relevant SRR1 bits */
+	stw	r4, _DAR(r11)
 	EXC_XFER_LITE(0x400, handle_page_fault)
 
 /* External interrupt */
@@ -338,11 +341,8 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_HPTE_TABLE)
 	. = 0x600
 	DO_KVM  0x600
 Alignment:
-	EXCEPTION_PROLOG
-	mfspr	r4,SPRN_DAR
-	stw	r4,_DAR(r11)
-	mfspr	r5,SPRN_DSISR
-	stw	r5,_DSISR(r11)
+	EXCEPTION_PROLOG handle_dar_dsisr=1
+	save_dar_dsisr_on_stack r4, r5, r11
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	EXC_XFER_STD(0x600, alignment_exception)
 
@@ -645,6 +645,16 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_NEED_DTLB_SW_LRU)
 
 	. = 0x3000
 
+handle_page_fault_tramp_1:
+	lwz	r4, _DAR(r11)
+	lwz	r5, _DSISR(r11)
+	/* fall through */
+handle_page_fault_tramp_2:
+	EXC_XFER_LITE(0x300, handle_page_fault)
+
+stack_overflow:
+	vmap_stack_overflow_exception
+
 AltiVecUnavailable:
 	EXCEPTION_PROLOG
 #ifdef CONFIG_ALTIVEC
@@ -917,6 +927,8 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_HPTE_TABLE)
 	ori	r4,r4,2f@l
 	tophys(r4,r4)
 	li	r3,MSR_KERNEL & ~(MSR_IR|MSR_DR)
+
+	.align	4
 	mtspr	SPRN_SRR0,r4
 	mtspr	SPRN_SRR1,r3
 	SYNC
@@ -1058,6 +1070,8 @@ _ENTRY(update_bats)
 	rlwinm	r0, r6, 0, ~MSR_RI
 	rlwinm	r0, r0, 0, ~MSR_EE
 	mtmsr	r0
+
+	.align	4
 	mtspr	SPRN_SRR0, r4
 	mtspr	SPRN_SRR1, r3
 	SYNC
@@ -1097,6 +1111,8 @@ mmu_off:
 	andi.	r0,r3,MSR_DR|MSR_IR		/* MMU enabled? */
 	beqlr
 	andc	r3,r3,r0
+
+	.align	4
 	mtspr	SPRN_SRR0,r4
 	mtspr	SPRN_SRR1,r3
 	sync
diff --git a/arch/powerpc/kernel/head_32.h b/arch/powerpc/kernel/head_32.h
index 8abc7783dbe5..a6a5fbbf8504 100644
--- a/arch/powerpc/kernel/head_32.h
+++ b/arch/powerpc/kernel/head_32.h
@@ -10,28 +10,60 @@
  * We assume sprg3 has the physical address of the current
  * task's thread_struct.
  */
+.macro EXCEPTION_PROLOG handle_dar_dsisr=0
+	EXCEPTION_PROLOG_0	handle_dar_dsisr=\handle_dar_dsisr
+	EXCEPTION_PROLOG_1
+	EXCEPTION_PROLOG_2	handle_dar_dsisr=\handle_dar_dsisr
+.endm
 
-.macro EXCEPTION_PROLOG
+.macro EXCEPTION_PROLOG_0 handle_dar_dsisr=0
 	mtspr	SPRN_SPRG_SCRATCH0,r10
 	mtspr	SPRN_SPRG_SCRATCH1,r11
+#ifdef CONFIG_VMAP_STACK
+	mfspr	r10, SPRN_SPRG_THREAD
+	.if	\handle_dar_dsisr
+	mfspr	r11, SPRN_DAR
+	stw	r11, DAR(r10)
+	mfspr	r11, SPRN_DSISR
+	stw	r11, DSISR(r10)
+	.endif
+	mfspr	r11, SPRN_SRR0
+	stw	r11, SRR0(r10)
+#endif
+	mfspr	r11, SPRN_SRR1		/* check whether user or kernel */
+#ifdef CONFIG_VMAP_STACK
+	stw	r11, SRR1(r10)
+#endif
 	mfcr	r10
-	EXCEPTION_PROLOG_1
-	EXCEPTION_PROLOG_2
+	andi.	r11, r11, MSR_PR
 .endm
 
-.macro EXCEPTION_PROLOG_1
-	mfspr	r11,SPRN_SRR1		/* check whether user or kernel */
-	andi.	r11,r11,MSR_PR
+.macro EXCEPTION_PROLOG_1 for_rtas=0
+#ifdef CONFIG_VMAP_STACK
+	.ifeq	\for_rtas
+	li	r11, MSR_KERNEL & ~(MSR_IR | MSR_RI) /* can take DTLB miss */
+	mtmsr	r11
+	isync
+	.endif
+	subi	r11, r1, INT_FRAME_SIZE		/* use r1 if kernel */
+#else
 	tophys(r11,r1)			/* use tophys(r1) if kernel */
+	subi	r11, r11, INT_FRAME_SIZE	/* alloc exc. frame */
+#endif
 	beq	1f
 	mfspr	r11,SPRN_SPRG_THREAD
+	tovirt_vmstack r11, r11
 	lwz	r11,TASK_STACK-THREAD(r11)
-	addi	r11,r11,THREAD_SIZE
-	tophys(r11,r11)
-1:	subi	r11,r11,INT_FRAME_SIZE	/* alloc exc. frame */
+	addi	r11, r11, THREAD_SIZE - INT_FRAME_SIZE
+	tophys_novmstack r11, r11
+1:
+#ifdef CONFIG_VMAP_STACK
+	mtcrf	0x7f, r11
+	bt	32 - THREAD_ALIGN_SHIFT, stack_overflow
+#endif
 .endm
 
-.macro EXCEPTION_PROLOG_2
+.macro EXCEPTION_PROLOG_2 handle_dar_dsisr=0
 	stw	r10,_CCR(r11)		/* save registers */
 	stw	r12,GPR12(r11)
 	stw	r9,GPR9(r11)
@@ -41,16 +73,33 @@
 	stw	r12,GPR11(r11)
 	mflr	r10
 	stw	r10,_LINK(r11)
+#ifdef CONFIG_VMAP_STACK
+	mfspr	r12, SPRN_SPRG_THREAD
+	tovirt(r12, r12)
+	.if	\handle_dar_dsisr
+	lwz	r10, DAR(r12)
+	stw	r10, _DAR(r11)
+	lwz	r10, DSISR(r12)
+	stw	r10, _DSISR(r11)
+	.endif
+	lwz	r9, SRR1(r12)
+	lwz	r12, SRR0(r12)
+#else
 	mfspr	r12,SPRN_SRR0
 	mfspr	r9,SPRN_SRR1
+#endif
 	stw	r1,GPR1(r11)
 	stw	r1,0(r11)
-	tovirt(r1,r11)			/* set new kernel sp */
+	tovirt_novmstack r1, r11	/* set new kernel sp */
 #ifdef CONFIG_40x
 	rlwinm	r9,r9,0,14,12		/* clear MSR_WE (necessary?) */
 #else
+#ifdef CONFIG_VMAP_STACK
+	li	r10, MSR_KERNEL & ~MSR_IR /* can take exceptions */
+#else
 	li	r10,MSR_KERNEL & ~(MSR_IR|MSR_DR) /* can take exceptions */
-	MTMSRD(r10)			/* (except for mach check in rtas) */
+#endif
+	mtmsr	r10			/* (except for mach check in rtas) */
 #endif
 	stw	r0,GPR0(r11)
 	lis	r10,STACK_FRAME_REGS_MARKER@ha /* exception frame marker */
@@ -62,25 +111,46 @@
 
 .macro SYSCALL_ENTRY trapno
 	mfspr	r12,SPRN_SPRG_THREAD
+#ifdef CONFIG_VMAP_STACK
+	mfspr	r9, SPRN_SRR0
+	mfspr	r11, SPRN_SRR1
+	stw	r9, SRR0(r12)
+	stw	r11, SRR1(r12)
+#endif
 	mfcr	r10
 	lwz	r11,TASK_STACK-THREAD(r12)
-	mflr	r9
-	addi	r11,r11,THREAD_SIZE - INT_FRAME_SIZE
 	rlwinm	r10,r10,0,4,2	/* Clear SO bit in CR */
-	tophys(r11,r11)
+	addi	r11, r11, THREAD_SIZE - INT_FRAME_SIZE
+#ifdef CONFIG_VMAP_STACK
+	li	r9, MSR_KERNEL & ~(MSR_IR | MSR_RI) /* can take DTLB miss */
+	mtmsr	r9
+	isync
+#endif
+	tovirt_vmstack r12, r12
+	tophys_novmstack r11, r11
+	mflr	r9
 	stw	r10,_CCR(r11)		/* save registers */
+	stw	r9, _LINK(r11)
+#ifdef CONFIG_VMAP_STACK
+	lwz	r10, SRR0(r12)
+	lwz	r9, SRR1(r12)
+#else
 	mfspr	r10,SPRN_SRR0
-	stw	r9,_LINK(r11)
 	mfspr	r9,SPRN_SRR1
+#endif
 	stw	r1,GPR1(r11)
 	stw	r1,0(r11)
-	tovirt(r1,r11)			/* set new kernel sp */
+	tovirt_novmstack r1, r11	/* set new kernel sp */
 	stw	r10,_NIP(r11)
 #ifdef CONFIG_40x
 	rlwinm	r9,r9,0,14,12		/* clear MSR_WE (necessary?) */
 #else
+#ifdef CONFIG_VMAP_STACK
+	LOAD_REG_IMMEDIATE(r10, MSR_KERNEL & ~MSR_IR) /* can take exceptions */
+#else
 	LOAD_REG_IMMEDIATE(r10, MSR_KERNEL & ~(MSR_IR|MSR_DR)) /* can take exceptions */
-	MTMSRD(r10)			/* (except for mach check in rtas) */
+#endif
+	mtmsr	r10			/* (except for mach check in rtas) */
 #endif
 	lis	r10,STACK_FRAME_REGS_MARKER@ha /* exception frame marker */
 	stw	r2,GPR2(r11)
@@ -118,7 +188,7 @@
 #endif
 
 3:
-	tovirt(r2, r2)			/* set r2 to current */
+	tovirt_novmstack r2, r2 	/* set r2 to current */
 	lis	r11, transfer_to_syscall@h
 	ori	r11, r11, transfer_to_syscall@l
 #ifdef CONFIG_TRACE_IRQFLAGS
@@ -141,6 +211,54 @@
 	RFI				/* jump to handler, enable MMU */
 .endm
 
+.macro save_dar_dsisr_on_stack reg1, reg2, sp
+#ifndef CONFIG_VMAP_STACK
+	mfspr	\reg1, SPRN_DAR
+	mfspr	\reg2, SPRN_DSISR
+	stw	\reg1, _DAR(\sp)
+	stw	\reg2, _DSISR(\sp)
+#endif
+.endm
+
+.macro get_and_save_dar_dsisr_on_stack reg1, reg2, sp
+#ifdef CONFIG_VMAP_STACK
+	lwz	\reg1, _DAR(\sp)
+	lwz	\reg2, _DSISR(\sp)
+#else
+	save_dar_dsisr_on_stack \reg1, \reg2, \sp
+#endif
+.endm
+
+.macro tovirt_vmstack dst, src
+#ifdef CONFIG_VMAP_STACK
+	tovirt(\dst, \src)
+#else
+	.ifnc	\dst, \src
+	mr	\dst, \src
+	.endif
+#endif
+.endm
+
+.macro tovirt_novmstack dst, src
+#ifndef CONFIG_VMAP_STACK
+	tovirt(\dst, \src)
+#else
+	.ifnc	\dst, \src
+	mr	\dst, \src
+	.endif
+#endif
+.endm
+
+.macro tophys_novmstack dst, src
+#ifndef CONFIG_VMAP_STACK
+	tophys(\dst, \src)
+#else
+	.ifnc	\dst, \src
+	mr	\dst, \src
+	.endif
+#endif
+.endm
+
 /*
  * Note: code which follows this uses cr0.eq (set if from kernel),
  * r11, r12 (SRR0), and r9 (SRR1).
@@ -187,4 +305,28 @@ label:
 	EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, transfer_to_handler, \
 			  ret_from_except)
 
+.macro vmap_stack_overflow_exception
+#ifdef CONFIG_VMAP_STACK
+#ifdef CONFIG_SMP
+	mfspr	r11, SPRN_SPRG_THREAD
+	tovirt(r11, r11)
+	lwz	r11, TASK_CPU - THREAD(r11)
+	slwi	r11, r11, 3
+	addis	r11, r11, emergency_ctx@ha
+#else
+	lis	r11, emergency_ctx@ha
+#endif
+	lwz	r11, emergency_ctx@l(r11)
+	cmpwi	cr1, r11, 0
+	bne	cr1, 1f
+	lis	r11, init_thread_union@ha
+	addi	r11, r11, init_thread_union@l
+1:	addi	r11, r11, THREAD_SIZE - INT_FRAME_SIZE
+	EXCEPTION_PROLOG_2
+	SAVE_NVGPRS(r11)
+	addi	r3, r1, STACK_FRAME_OVERHEAD
+	EXC_XFER_STD(0, stack_overflow_exception)
+#endif
+.endm
+
 #endif /* __HEAD_32_H__ */
diff --git a/arch/powerpc/kernel/head_40x.S b/arch/powerpc/kernel/head_40x.S
index 585ea1976550..9bb663977e84 100644
--- a/arch/powerpc/kernel/head_40x.S
+++ b/arch/powerpc/kernel/head_40x.S
@@ -313,6 +313,7 @@ _ENTRY(saved_ksp_limit)
 	START_EXCEPTION(0x0400, InstructionAccess)
 	EXCEPTION_PROLOG
 	mr	r4,r12			/* Pass SRR0 as arg2 */
+	stw	r4, _DEAR(r11)
 	li	r5,0			/* Pass zero as arg3 */
 	EXC_XFER_LITE(0x400, handle_page_fault)
 
@@ -676,6 +677,7 @@ DataAccess:
 	mfspr	r5,SPRN_ESR		/* Grab the ESR, save it, pass arg3 */
 	stw	r5,_ESR(r11)
 	mfspr	r4,SPRN_DEAR		/* Grab the DEAR, save it, pass arg2 */
+	stw	r4, _DEAR(r11)
 	EXC_XFER_LITE(0x300, handle_page_fault)
 
 /* Other PowerPC processors, namely those derived from the 6xx-series
diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S
index 19f583e18402..9922306ae512 100644
--- a/arch/powerpc/kernel/head_8xx.S
+++ b/arch/powerpc/kernel/head_8xx.S
@@ -127,56 +127,36 @@ instruction_counter:
 /* Machine check */
 	. = 0x200
 MachineCheck:
-	EXCEPTION_PROLOG
-	mfspr r4,SPRN_DAR
-	stw r4,_DAR(r11)
-	li r5,RPN_PATTERN
-	mtspr SPRN_DAR,r5	/* Tag DAR, to be used in DTLB Error */
-	mfspr r5,SPRN_DSISR
-	stw r5,_DSISR(r11)
+	EXCEPTION_PROLOG handle_dar_dsisr=1
+	save_dar_dsisr_on_stack r4, r5, r11
+	li	r6, RPN_PATTERN
+	mtspr	SPRN_DAR, r6	/* Tag DAR, to be used in DTLB Error */
 	addi r3,r1,STACK_FRAME_OVERHEAD
 	EXC_XFER_STD(0x200, machine_check_exception)
 
-/* Data access exception.
- * This is "never generated" by the MPC8xx.
- */
-	. = 0x300
-DataAccess:
-
-/* Instruction access exception.
- * This is "never generated" by the MPC8xx.
- */
-	. = 0x400
-InstructionAccess:
-
 /* External interrupt */
 	EXCEPTION(0x500, HardwareInterrupt, do_IRQ, EXC_XFER_LITE)
 
 /* Alignment exception */
 	. = 0x600
 Alignment:
-	EXCEPTION_PROLOG
-	mfspr	r4,SPRN_DAR
-	stw	r4,_DAR(r11)
-	li	r5,RPN_PATTERN
-	mtspr	SPRN_DAR,r5	/* Tag DAR, to be used in DTLB Error */
-	mfspr	r5,SPRN_DSISR
-	stw	r5,_DSISR(r11)
+	EXCEPTION_PROLOG handle_dar_dsisr=1
+	save_dar_dsisr_on_stack r4, r5, r11
+	li	r6, RPN_PATTERN
+	mtspr	SPRN_DAR, r6	/* Tag DAR, to be used in DTLB Error */
 	addi	r3,r1,STACK_FRAME_OVERHEAD
-	EXC_XFER_STD(0x600, alignment_exception)
+	b	.Lalignment_exception_ool
 
 /* Program check exception */
 	EXCEPTION(0x700, ProgramCheck, program_check_exception, EXC_XFER_STD)
 
-/* No FPU on MPC8xx.  This exception is not supposed to happen.
-*/
-	EXCEPTION(0x800, FPUnavailable, unknown_exception, EXC_XFER_STD)
-
 /* Decrementer */
 	EXCEPTION(0x900, Decrementer, timer_interrupt, EXC_XFER_LITE)
 
-	EXCEPTION(0xa00, Trap_0a, unknown_exception, EXC_XFER_STD)
-	EXCEPTION(0xb00, Trap_0b, unknown_exception, EXC_XFER_STD)
+	/* With VMAP_STACK there's not enough room for this at 0x600 */
+	. = 0xa00
+.Lalignment_exception_ool:
+	EXC_XFER_STD(0x600, alignment_exception)
 
 /* System call */
 	. = 0xc00
@@ -185,25 +165,12 @@ SystemCall:
 
 /* Single step - not used on 601 */
 	EXCEPTION(0xd00, SingleStep, single_step_exception, EXC_XFER_STD)
-	EXCEPTION(0xe00, Trap_0e, unknown_exception, EXC_XFER_STD)
-	EXCEPTION(0xf00, Trap_0f, unknown_exception, EXC_XFER_STD)
 
 /* On the MPC8xx, this is a software emulation interrupt.  It occurs
  * for all unimplemented and illegal instructions.
  */
 	EXCEPTION(0x1000, SoftEmu, program_check_exception, EXC_XFER_STD)
 
-/* Called from DataStoreTLBMiss when perf TLB misses events are activated */
-#ifdef CONFIG_PERF_EVENTS
-	patch_site	0f, patch__dtlbmiss_perf
-0:	lwz	r10, (dtlb_miss_counter - PAGE_OFFSET)@l(0)
-	addi	r10, r10, 1
-	stw	r10, (dtlb_miss_counter - PAGE_OFFSET)@l(0)
-	mfspr	r10, SPRN_SPRG_SCRATCH0
-	mfspr	r11, SPRN_SPRG_SCRATCH1
-	rfi
-#endif
-
 	. = 0x1100
 /*
  * For the MPC8xx, this is a software tablewalk to load the instruction
@@ -343,8 +310,8 @@ ITLBMissLinear:
 
 	. = 0x1200
 DataStoreTLBMiss:
-	mtspr	SPRN_SPRG_SCRATCH0, r10
-	mtspr	SPRN_SPRG_SCRATCH1, r11
+	mtspr	SPRN_DAR, r10
+	mtspr	SPRN_M_TW, r11
 	mfcr	r11
 
 	/* If we are faulting a kernel address, we have to use the
@@ -409,10 +376,10 @@ DataStoreTLBMiss:
 	mtspr	SPRN_MD_RPN, r10	/* Update TLB entry */
 
 	/* Restore registers */
-	mtspr	SPRN_DAR, r11	/* Tag DAR */
 
-0:	mfspr	r10, SPRN_SPRG_SCRATCH0
-	mfspr	r11, SPRN_SPRG_SCRATCH1
+0:	mfspr	r10, SPRN_DAR
+	mtspr	SPRN_DAR, r11	/* Tag DAR */
+	mfspr	r11, SPRN_M_TW
 	rfi
 	patch_site	0b, patch__dtlbmiss_exit_1
 
@@ -428,10 +395,10 @@ DTLBMissIMMR:
 	mtspr	SPRN_MD_RPN, r10	/* Update TLB entry */
 
 	li	r11, RPN_PATTERN
-	mtspr	SPRN_DAR, r11	/* Tag DAR */
 
-0:	mfspr	r10, SPRN_SPRG_SCRATCH0
-	mfspr	r11, SPRN_SPRG_SCRATCH1
+0:	mfspr	r10, SPRN_DAR
+	mtspr	SPRN_DAR, r11	/* Tag DAR */
+	mfspr	r11, SPRN_M_TW
 	rfi
 	patch_site	0b, patch__dtlbmiss_exit_2
 
@@ -465,10 +432,10 @@ DTLBMissLinear:
 	mtspr	SPRN_MD_RPN, r10	/* Update TLB entry */
 
 	li	r11, RPN_PATTERN
-	mtspr	SPRN_DAR, r11	/* Tag DAR */
 
-0:	mfspr	r10, SPRN_SPRG_SCRATCH0
-	mfspr	r11, SPRN_SPRG_SCRATCH1
+0:	mfspr	r10, SPRN_DAR
+	mtspr	SPRN_DAR, r11	/* Tag DAR */
+	mfspr	r11, SPRN_M_TW
 	rfi
 	patch_site	0b, patch__dtlbmiss_exit_3
 
@@ -486,6 +453,7 @@ InstructionTLBError:
 	tlbie	r4
 	/* 0x400 is InstructionAccess exception, needed by bad_page_fault() */
 .Litlbie:
+	stw	r4, _DAR(r11)
 	EXC_XFER_LITE(0x400, handle_page_fault)
 
 /* This is the data TLB error on the MPC8xx.  This could be due to
@@ -494,58 +462,69 @@ InstructionTLBError:
  */
 	. = 0x1400
 DataTLBError:
-	mtspr	SPRN_SPRG_SCRATCH0, r10
-	mtspr	SPRN_SPRG_SCRATCH1, r11
-	mfcr	r10
-
+	EXCEPTION_PROLOG_0 handle_dar_dsisr=1
 	mfspr	r11, SPRN_DAR
-	cmpwi	cr0, r11, RPN_PATTERN
-	beq-	FixupDAR	/* must be a buggy dcbX, icbi insn. */
+	cmpwi	cr1, r11, RPN_PATTERN
+	beq-	cr1, FixupDAR	/* must be a buggy dcbX, icbi insn. */
 DARFixed:/* Return from dcbx instruction bug workaround */
+#ifdef CONFIG_VMAP_STACK
+	li	r11, RPN_PATTERN
+	mtspr	SPRN_DAR, r11	/* Tag DAR, to be used in DTLB Error */
+#endif
 	EXCEPTION_PROLOG_1
-	EXCEPTION_PROLOG_2
-	mfspr	r5,SPRN_DSISR
-	stw	r5,_DSISR(r11)
-	mfspr	r4,SPRN_DAR
+	EXCEPTION_PROLOG_2 handle_dar_dsisr=1
+	get_and_save_dar_dsisr_on_stack r4, r5, r11
 	andis.	r10,r5,DSISR_NOHPTE@h
 	beq+	.Ldtlbie
 	tlbie	r4
 .Ldtlbie:
+#ifndef CONFIG_VMAP_STACK
 	li	r10,RPN_PATTERN
 	mtspr	SPRN_DAR,r10	/* Tag DAR, to be used in DTLB Error */
+#endif
 	/* 0x300 is DataAccess exception, needed by bad_page_fault() */
 	EXC_XFER_LITE(0x300, handle_page_fault)
 
-	EXCEPTION(0x1500, Trap_15, unknown_exception, EXC_XFER_STD)
-	EXCEPTION(0x1600, Trap_16, unknown_exception, EXC_XFER_STD)
-	EXCEPTION(0x1700, Trap_17, unknown_exception, EXC_XFER_STD)
-	EXCEPTION(0x1800, Trap_18, unknown_exception, EXC_XFER_STD)
-	EXCEPTION(0x1900, Trap_19, unknown_exception, EXC_XFER_STD)
-	EXCEPTION(0x1a00, Trap_1a, unknown_exception, EXC_XFER_STD)
-	EXCEPTION(0x1b00, Trap_1b, unknown_exception, EXC_XFER_STD)
+/* Called from DataStoreTLBMiss when perf TLB misses events are activated */
+#ifdef CONFIG_PERF_EVENTS
+	patch_site	0f, patch__dtlbmiss_perf
+0:	lwz	r10, (dtlb_miss_counter - PAGE_OFFSET)@l(0)
+	addi	r10, r10, 1
+	stw	r10, (dtlb_miss_counter - PAGE_OFFSET)@l(0)
+	mfspr	r10, SPRN_DAR
+	mtspr	SPRN_DAR, r11	/* Tag DAR */
+	mfspr	r11, SPRN_M_TW
+	rfi
+#endif
+
+stack_overflow:
+	vmap_stack_overflow_exception
 
 /* On the MPC8xx, these next four traps are used for development
  * support of breakpoints and such.  Someday I will get around to
  * using them.
  */
-	. = 0x1c00
-DataBreakpoint:
-	mtspr	SPRN_SPRG_SCRATCH0, r10
-	mtspr	SPRN_SPRG_SCRATCH1, r11
-	mfcr	r10
-	mfspr	r11, SPRN_SRR0
-	cmplwi	cr0, r11, (.Ldtlbie - PAGE_OFFSET)@l
-	cmplwi	cr7, r11, (.Litlbie - PAGE_OFFSET)@l
-	beq-	cr0, 11f
-	beq-	cr7, 11f
+do_databreakpoint:
 	EXCEPTION_PROLOG_1
-	EXCEPTION_PROLOG_2
+	EXCEPTION_PROLOG_2 handle_dar_dsisr=1
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	mfspr	r4,SPRN_BAR
 	stw	r4,_DAR(r11)
+#ifdef CONFIG_VMAP_STACK
+	lwz	r5,_DSISR(r11)
+#else
 	mfspr	r5,SPRN_DSISR
+#endif
 	EXC_XFER_STD(0x1c00, do_break)
-11:
+
+	. = 0x1c00
+DataBreakpoint:
+	EXCEPTION_PROLOG_0 handle_dar_dsisr=1
+	mfspr	r11, SPRN_SRR0
+	cmplwi	cr1, r11, (.Ldtlbie - PAGE_OFFSET)@l
+	cmplwi	cr7, r11, (.Litlbie - PAGE_OFFSET)@l
+	cror	4*cr1+eq, 4*cr1+eq, 4*cr7+eq
+	bne	cr1, do_databreakpoint
 	mtcr	r10
 	mfspr	r10, SPRN_SPRG_SCRATCH0
 	mfspr	r11, SPRN_SPRG_SCRATCH1
@@ -581,9 +560,9 @@ FixupDAR:/* Entry point for dcbx workaround. */
 	mfspr	r10, SPRN_SRR0
 	mtspr	SPRN_MD_EPN, r10
 	rlwinm	r11, r10, 16, 0xfff8
-	cmpli	cr0, r11, PAGE_OFFSET@h
+	cmpli	cr1, r11, PAGE_OFFSET@h
 	mfspr	r11, SPRN_M_TWB	/* Get level 1 table */
-	blt+	3f
+	blt+	cr1, 3f
 	rlwinm	r11, r10, 16, 0xfff8
 
 0:	cmpli	cr7, r11, (PAGE_OFFSET + 0x1800000)@h
@@ -598,7 +577,7 @@ FixupDAR:/* Entry point for dcbx workaround. */
 3:
 	lwz	r11, (swapper_pg_dir-PAGE_OFFSET)@l(r11)	/* Get the level 1 entry */
 	mtspr	SPRN_MD_TWC, r11
-	mtcr	r11
+	mtcrf	0x01, r11
 	mfspr	r11, SPRN_MD_TWC
 	lwz	r11, 0(r11)	/* Get the pte */
 	bt	28,200f		/* bit 28 = Large page (8M) */
@@ -611,16 +590,16 @@ FixupDAR:/* Entry point for dcbx workaround. */
  * no need to include them here */
 	xoris	r10, r11, 0x7c00	/* check if major OP code is 31 */
 	rlwinm	r10, r10, 0, 21, 5
-	cmpwi	cr0, r10, 2028	/* Is dcbz? */
-	beq+	142f
-	cmpwi	cr0, r10, 940	/* Is dcbi? */
-	beq+	142f
-	cmpwi	cr0, r10, 108	/* Is dcbst? */
-	beq+	144f		/* Fix up store bit! */
-	cmpwi	cr0, r10, 172	/* Is dcbf? */
-	beq+	142f
-	cmpwi	cr0, r10, 1964	/* Is icbi? */
-	beq+	142f
+	cmpwi	cr1, r10, 2028	/* Is dcbz? */
+	beq+	cr1, 142f
+	cmpwi	cr1, r10, 940	/* Is dcbi? */
+	beq+	cr1, 142f
+	cmpwi	cr1, r10, 108	/* Is dcbst? */
+	beq+	cr1, 144f		/* Fix up store bit! */
+	cmpwi	cr1, r10, 172	/* Is dcbf? */
+	beq+	cr1, 142f
+	cmpwi	cr1, r10, 1964	/* Is icbi? */
+	beq+	cr1, 142f
 141:	mfspr	r10,SPRN_M_TW
 	b	DARFixed	/* Nope, go back to normal TLB processing */
 
@@ -679,8 +658,9 @@ FixupDAR:/* Entry point for dcbx workaround. */
 	add	r10, r10, r30	;b	151f
 	add	r10, r10, r31
 151:
-	rlwinm. r11,r11,19,24,28	/* offset into jump table for reg RA */
-	beq	152f			/* if reg RA is zero, don't add it */
+	rlwinm	r11,r11,19,24,28	/* offset into jump table for reg RA */
+	cmpwi	cr1, r11, 0
+	beq	cr1, 152f		/* if reg RA is zero, don't add it */
 	addi	r11, r11, 150b@l	/* add start of table */
 	mtctr	r11			/* load ctr with jump address */
 	rlwinm	r11,r11,0,16,10		/* make sure we don't execute this more than once */
@@ -688,7 +668,14 @@ FixupDAR:/* Entry point for dcbx workaround. */
 152:
 	mfdar	r11
 	mtctr	r11			/* restore ctr reg from DAR */
+#ifdef CONFIG_VMAP_STACK
+	mfspr	r11, SPRN_SPRG_THREAD
+	stw	r10, DAR(r11)
+	mfspr	r10, SPRN_DSISR
+	stw	r10, DSISR(r11)
+#else
 	mtdar	r10			/* save fault EA to DAR */
+#endif
 	mfspr	r10,SPRN_M_TW
 	b	DARFixed		/* Go back to normal TLB handling */
 
diff --git a/arch/powerpc/kernel/head_booke.h b/arch/powerpc/kernel/head_booke.h
index 2ae635df9026..37fc84ed90e3 100644
--- a/arch/powerpc/kernel/head_booke.h
+++ b/arch/powerpc/kernel/head_booke.h
@@ -467,6 +467,7 @@ label:
 	mfspr	r5,SPRN_ESR;		/* Grab the ESR and save it */	      \
 	stw	r5,_ESR(r11);						      \
 	mfspr	r4,SPRN_DEAR;		/* Grab the DEAR */		      \
+	stw	r4, _DEAR(r11);						      \
 	EXC_XFER_LITE(0x0300, handle_page_fault)
 
 #define INSTRUCTION_STORAGE_EXCEPTION					      \
@@ -475,6 +476,7 @@ label:
 	mfspr	r5,SPRN_ESR;		/* Grab the ESR and save it */	      \
 	stw	r5,_ESR(r11);						      \
 	mr      r4,r12;                 /* Pass SRR0 as arg2 */		      \
+	stw	r4, _DEAR(r11);						      \
 	li      r5,0;                   /* Pass zero as arg3 */		      \
 	EXC_XFER_LITE(0x0400, handle_page_fault)
 
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index 6f7a3a7162c5..840af004041e 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -378,6 +378,7 @@ interrupt_base:
 	mfspr	r4,SPRN_DEAR		/* Grab the DEAR, save it, pass arg2 */
 	andis.	r10,r5,(ESR_ILK|ESR_DLK)@h
 	bne	1f
+	stw	r4, _DEAR(r11)
 	EXC_XFER_LITE(0x0300, handle_page_fault)
 1:
 	addi	r3,r1,STACK_FRAME_OVERHEAD
diff --git a/arch/powerpc/kernel/hw_breakpoint.c b/arch/powerpc/kernel/hw_breakpoint.c
index 58ce3d37c2a3..2462cd7c565c 100644
--- a/arch/powerpc/kernel/hw_breakpoint.c
+++ b/arch/powerpc/kernel/hw_breakpoint.c
@@ -160,6 +160,9 @@ static int hw_breakpoint_validate_len(struct arch_hw_breakpoint *hw)
 		/* DAWR region can't cross 512 bytes boundary */
 		if ((start_addr >> 9) != (end_addr >> 9))
 			return -EINVAL;
+	} else if (IS_ENABLED(CONFIG_PPC_8xx)) {
+		/* 8xx can setup a range without limitation */
+		max_len = U16_MAX;
 	}
 
 	if (hw_len > max_len)
@@ -328,13 +331,11 @@ int hw_breakpoint_handler(struct die_args *args)
 	}
 
 	info->type &= ~HW_BRK_TYPE_EXTRANEOUS_IRQ;
-	if (IS_ENABLED(CONFIG_PPC_8xx)) {
-		if (!dar_within_range(regs->dar, info))
-			info->type |= HW_BRK_TYPE_EXTRANEOUS_IRQ;
-	} else {
-		if (!stepping_handler(regs, bp, info))
-			goto out;
-	}
+	if (!dar_within_range(regs->dar, info))
+		info->type |= HW_BRK_TYPE_EXTRANEOUS_IRQ;
+
+	if (!IS_ENABLED(CONFIG_PPC_8xx) && !stepping_handler(regs, bp, info))
+		goto out;
 
 	/*
 	 * As a policy, the callback is invoked in a 'trigger-after-execute'
diff --git a/arch/powerpc/kernel/idle.c b/arch/powerpc/kernel/idle.c
index a36fd053c3db..422e31d2f5a2 100644
--- a/arch/powerpc/kernel/idle.c
+++ b/arch/powerpc/kernel/idle.c
@@ -77,6 +77,31 @@ void arch_cpu_idle(void)
 
 int powersave_nap;
 
+#ifdef CONFIG_PPC_970_NAP
+void power4_idle(void)
+{
+	if (!cpu_has_feature(CPU_FTR_CAN_NAP))
+		return;
+
+	if (!powersave_nap)
+		return;
+
+	if (!prep_irq_for_idle())
+		return;
+
+	if (cpu_has_feature(CPU_FTR_ALTIVEC))
+		asm volatile("DSSALL ; sync" ::: "memory");
+
+	power4_idle_nap();
+
+	/*
+	 * power4_idle_nap returns with interrupts enabled (soft and hard).
+	 * to our caller with interrupts enabled (soft and hard). Our caller
+	 * can cope with either interrupts disabled or enabled upon return.
+	 */
+}
+#endif
+
 #ifdef CONFIG_SYSCTL
 /*
  * Register the sysctl to set/clear powersave_nap.
diff --git a/arch/powerpc/kernel/idle_book3s.S b/arch/powerpc/kernel/idle_book3s.S
index d32751994a62..22f249b6f58d 100644
--- a/arch/powerpc/kernel/idle_book3s.S
+++ b/arch/powerpc/kernel/idle_book3s.S
@@ -15,7 +15,9 @@
 #include <asm/asm-offsets.h>
 #include <asm/ppc-opcode.h>
 #include <asm/cpuidle.h>
+#include <asm/thread_info.h> /* TLF_NAPPING */
 
+#ifdef CONFIG_PPC_P7_NAP
 /*
  * Desired PSSCR in r3
  *
@@ -181,4 +183,22 @@ _GLOBAL(isa206_idle_insn_mayloss)
 	bne	2f
 	IDLE_STATE_ENTER_SEQ_NORET(PPC_SLEEP)
 2:	IDLE_STATE_ENTER_SEQ_NORET(PPC_WINKLE)
+#endif
 
+#ifdef CONFIG_PPC_970_NAP
+_GLOBAL(power4_idle_nap)
+	LOAD_REG_IMMEDIATE(r7, MSR_KERNEL|MSR_EE|MSR_POW)
+	ld	r9,PACA_THREAD_INFO(r13)
+	ld	r8,TI_LOCAL_FLAGS(r9)
+	ori	r8,r8,_TLF_NAPPING
+	std	r8,TI_LOCAL_FLAGS(r9)
+	/*
+	 * NAPPING bit is set, from this point onward power4_fixup_nap
+	 * will cause exceptions to return to power4_idle_nap_return.
+	 */
+1:	sync
+	isync
+	mtmsrd	r7
+	isync
+	b	1b
+#endif
diff --git a/arch/powerpc/kernel/idle_power4.S b/arch/powerpc/kernel/idle_power4.S
deleted file mode 100644
index 33c625329078..000000000000
--- a/arch/powerpc/kernel/idle_power4.S
+++ /dev/null
@@ -1,83 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- *  This file contains the power_save function for 970-family CPUs.
- */
-
-#include <linux/threads.h>
-#include <asm/processor.h>
-#include <asm/page.h>
-#include <asm/cputable.h>
-#include <asm/thread_info.h>
-#include <asm/ppc_asm.h>
-#include <asm/asm-offsets.h>
-#include <asm/irqflags.h>
-#include <asm/hw_irq.h>
-#include <asm/feature-fixups.h>
-
-#undef DEBUG
-
-	.text
-
-_GLOBAL(power4_idle)
-BEGIN_FTR_SECTION
-	blr
-END_FTR_SECTION_IFCLR(CPU_FTR_CAN_NAP)
-	/* Now check if user or arch enabled NAP mode */
-	LOAD_REG_ADDRBASE(r3,powersave_nap)
-	lwz	r4,ADDROFF(powersave_nap)(r3)
-	cmpwi	0,r4,0
-	beqlr
-
-	/* This sequence is similar to prep_irq_for_idle() */
-
-	/* Hard disable interrupts */
-	mfmsr	r7
-	rldicl	r0,r7,48,1
-	rotldi	r0,r0,16
-	mtmsrd	r0,1
-
-	/* Check if something happened while soft-disabled */
-	lbz	r0,PACAIRQHAPPENED(r13)
-	cmpwi	cr0,r0,0
-	bne-	2f
-
-	/*
-	 * Soft-enable interrupts. This will make power4_fixup_nap return
-	 * to our caller with interrupts enabled (soft and hard). The caller
-	 * can cope with either interrupts disabled or enabled upon return.
-	 */
-#ifdef CONFIG_TRACE_IRQFLAGS
-	/* Tell the tracer interrupts are on, because idle responds to them. */
-	mflr	r0
-	std	r0,16(r1)
-	stdu    r1,-128(r1)
-	bl	trace_hardirqs_on
-	addi    r1,r1,128
-	ld	r0,16(r1)
-	mtlr	r0
-	mfmsr	r7
-#endif /* CONFIG_TRACE_IRQFLAGS */
-
-	li	r0,IRQS_ENABLED
-	stb	r0,PACAIRQSOFTMASK(r13)	/* we'll hard-enable shortly */
-BEGIN_FTR_SECTION
-	DSSALL
-	sync
-END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
-	ld	r9, PACA_THREAD_INFO(r13)
-	ld	r8,TI_LOCAL_FLAGS(r9)	/* set napping bit */
-	ori	r8,r8,_TLF_NAPPING	/* so when we take an exception */
-	std	r8,TI_LOCAL_FLAGS(r9)	/* it will return to our caller */
-	ori	r7,r7,MSR_EE
-	oris	r7,r7,MSR_POW@h
-1:	sync
-	isync
-	mtmsrd	r7
-	isync
-	b	1b
-
-2:	/* Return if an interrupt had happened while soft disabled */
-	/* Set the HARD_DIS flag because interrupts are now hard disabled */
-	ori	r0,r0,PACA_IRQ_HARD_DIS
-	stb	r0,PACAIRQHAPPENED(r13)
-	blr
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index add67498c126..5c9b11878555 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -50,6 +50,7 @@
 #include <linux/debugfs.h>
 #include <linux/of.h>
 #include <linux/of_irq.h>
+#include <linux/vmalloc.h>
 
 #include <linux/uaccess.h>
 #include <asm/io.h>
@@ -664,8 +665,29 @@ void do_IRQ(struct pt_regs *regs)
 	set_irq_regs(old_regs);
 }
 
+static void *__init alloc_vm_stack(void)
+{
+	return __vmalloc_node_range(THREAD_SIZE, THREAD_ALIGN, VMALLOC_START,
+				    VMALLOC_END, THREADINFO_GFP, PAGE_KERNEL,
+				     0, NUMA_NO_NODE, (void*)_RET_IP_);
+}
+
+static void __init vmap_irqstack_init(void)
+{
+	int i;
+
+	for_each_possible_cpu(i) {
+		softirq_ctx[i] = alloc_vm_stack();
+		hardirq_ctx[i] = alloc_vm_stack();
+	}
+}
+
+
 void __init init_IRQ(void)
 {
+	if (IS_ENABLED(CONFIG_VMAP_STACK))
+		vmap_irqstack_init();
+
 	if (ppc_md.init_IRQ)
 		ppc_md.init_IRQ();
 }
diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c
index 7cea5978f21f..f061e06e9f51 100644
--- a/arch/powerpc/kernel/legacy_serial.c
+++ b/arch/powerpc/kernel/legacy_serial.c
@@ -479,8 +479,10 @@ static void __init fixup_port_irq(int index,
 	port->irq = virq;
 
 #ifdef CONFIG_SERIAL_8250_FSL
-	if (of_device_is_compatible(np, "fsl,ns16550"))
+	if (of_device_is_compatible(np, "fsl,ns16550")) {
 		port->handle_irq = fsl8250_handle_irq;
+		port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_8250_CONSOLE);
+	}
 #endif
 }
 
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 1c448cf25506..c6c03416a151 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -261,12 +261,6 @@ int pcibios_sriov_disable(struct pci_dev *pdev)
 
 #endif /* CONFIG_PCI_IOV */
 
-void pcibios_bus_add_device(struct pci_dev *pdev)
-{
-	if (ppc_md.pcibios_bus_add_device)
-		ppc_md.pcibios_bus_add_device(pdev);
-}
-
 static resource_size_t pcibios_io_size(const struct pci_controller *hose)
 {
 #ifdef CONFIG_PPC64
@@ -964,7 +958,7 @@ void pcibios_setup_bus_self(struct pci_bus *bus)
 		phb->controller_ops.dma_bus_setup(bus);
 }
 
-static void pcibios_setup_device(struct pci_dev *dev)
+void pcibios_bus_add_device(struct pci_dev *dev)
 {
 	struct pci_controller *phb;
 	/* Fixup NUMA node as it may not be setup yet by the generic
@@ -985,17 +979,13 @@ static void pcibios_setup_device(struct pci_dev *dev)
 	pci_read_irq_line(dev);
 	if (ppc_md.pci_irq_fixup)
 		ppc_md.pci_irq_fixup(dev);
+
+	if (ppc_md.pcibios_bus_add_device)
+		ppc_md.pcibios_bus_add_device(dev);
 }
 
 int pcibios_add_device(struct pci_dev *dev)
 {
-	/*
-	 * We can only call pcibios_setup_device() after bus setup is complete,
-	 * since some of the platform specific DMA setup code depends on it.
-	 */
-	if (dev->bus->is_added)
-		pcibios_setup_device(dev);
-
 #ifdef CONFIG_PCI_IOV
 	if (ppc_md.pcibios_fixup_sriov)
 		ppc_md.pcibios_fixup_sriov(dev);
@@ -1004,24 +994,6 @@ int pcibios_add_device(struct pci_dev *dev)
 	return 0;
 }
 
-void pcibios_setup_bus_devices(struct pci_bus *bus)
-{
-	struct pci_dev *dev;
-
-	pr_debug("PCI: Fixup bus devices %d (%s)\n",
-		 bus->number, bus->self ? pci_name(bus->self) : "PHB");
-
-	list_for_each_entry(dev, &bus->devices, bus_list) {
-		/* Cardbus can call us to add new devices to a bus, so ignore
-		 * those who are already fully discovered
-		 */
-		if (pci_dev_is_added(dev))
-			continue;
-
-		pcibios_setup_device(dev);
-	}
-}
-
 void pcibios_set_master(struct pci_dev *dev)
 {
 	/* No special bus mastering setup handling */
@@ -1037,19 +1009,9 @@ void pcibios_fixup_bus(struct pci_bus *bus)
 
 	/* Now fixup the bus bus */
 	pcibios_setup_bus_self(bus);
-
-	/* Now fixup devices on that bus */
-	pcibios_setup_bus_devices(bus);
 }
 EXPORT_SYMBOL(pcibios_fixup_bus);
 
-void pci_fixup_cardbus(struct pci_bus *bus)
-{
-	/* Now fixup devices on that bus */
-	pcibios_setup_bus_devices(bus);
-}
-
-
 static int skip_isa_ioresource_align(struct pci_dev *dev)
 {
 	if (pci_has_flag(PCI_CAN_SKIP_ISA_ALIGN) &&
diff --git a/arch/powerpc/kernel/pci-hotplug.c b/arch/powerpc/kernel/pci-hotplug.c
index fc62c4bc47b1..d6a67f814983 100644
--- a/arch/powerpc/kernel/pci-hotplug.c
+++ b/arch/powerpc/kernel/pci-hotplug.c
@@ -134,7 +134,6 @@ void pci_hp_add_devices(struct pci_bus *bus)
 		 */
 		slotno = PCI_SLOT(PCI_DN(dn->child)->devfn);
 		pci_scan_slot(bus, PCI_DEVFN(slotno, 0));
-		pcibios_setup_bus_devices(bus);
 		max = bus->busn_res.start;
 		/*
 		 * Scan bridges that are already configured. We don't touch
diff --git a/arch/powerpc/kernel/pci_dn.c b/arch/powerpc/kernel/pci_dn.c
index 9524009ca1ae..4e654df55969 100644
--- a/arch/powerpc/kernel/pci_dn.c
+++ b/arch/powerpc/kernel/pci_dn.c
@@ -125,7 +125,7 @@ struct pci_dn *pci_get_pdn(struct pci_dev *pdev)
 }
 
 #ifdef CONFIG_PCI_IOV
-static struct pci_dn *add_one_dev_pci_data(struct pci_dn *parent,
+static struct pci_dn *add_one_sriov_vf_pdn(struct pci_dn *parent,
 					   int vf_index,
 					   int busno, int devfn)
 {
@@ -151,17 +151,15 @@ static struct pci_dn *add_one_dev_pci_data(struct pci_dn *parent,
 
 	return pdn;
 }
-#endif
 
-struct pci_dn *add_dev_pci_data(struct pci_dev *pdev)
+struct pci_dn *add_sriov_vf_pdns(struct pci_dev *pdev)
 {
-#ifdef CONFIG_PCI_IOV
 	struct pci_dn *parent, *pdn;
 	int i;
 
 	/* Only support IOV for now */
-	if (!pdev->is_physfn)
-		return pci_get_pdn(pdev);
+	if (WARN_ON(!pdev->is_physfn))
+		return NULL;
 
 	/* Check if VFs have been populated */
 	pdn = pci_get_pdn(pdev);
@@ -176,7 +174,7 @@ struct pci_dn *add_dev_pci_data(struct pci_dev *pdev)
 	for (i = 0; i < pci_sriov_get_totalvfs(pdev); i++) {
 		struct eeh_dev *edev __maybe_unused;
 
-		pdn = add_one_dev_pci_data(parent, i,
+		pdn = add_one_sriov_vf_pdn(parent, i,
 					   pci_iov_virtfn_bus(pdev, i),
 					   pci_iov_virtfn_devfn(pdev, i));
 		if (!pdn) {
@@ -192,31 +190,17 @@ struct pci_dn *add_dev_pci_data(struct pci_dev *pdev)
 		edev->physfn = pdev;
 #endif /* CONFIG_EEH */
 	}
-#endif /* CONFIG_PCI_IOV */
-
 	return pci_get_pdn(pdev);
 }
 
-void remove_dev_pci_data(struct pci_dev *pdev)
+void remove_sriov_vf_pdns(struct pci_dev *pdev)
 {
-#ifdef CONFIG_PCI_IOV
 	struct pci_dn *parent;
 	struct pci_dn *pdn, *tmp;
 	int i;
 
-	/*
-	 * VF and VF PE are created/released dynamically, so we need to
-	 * bind/unbind them.  Otherwise the VF and VF PE would be mismatched
-	 * when re-enabling SR-IOV.
-	 */
-	if (pdev->is_virtfn) {
-		pdn = pci_get_pdn(pdev);
-		pdn->pe_number = IODA_INVALID_PE;
-		return;
-	}
-
 	/* Only support IOV PF for now */
-	if (!pdev->is_physfn)
+	if (WARN_ON(!pdev->is_physfn))
 		return;
 
 	/* Check if VFs have been populated */
@@ -244,9 +228,22 @@ void remove_dev_pci_data(struct pci_dev *pdev)
 				continue;
 
 #ifdef CONFIG_EEH
-			/* Release EEH device for the VF */
+			/*
+			 * Release EEH state for this VF. The PCI core
+			 * has already torn down the pci_dev for this VF, but
+			 * we're responsible to removing the eeh_dev since it
+			 * has the same lifetime as the pci_dn that spawned it.
+			 */
 			edev = pdn_to_eeh_dev(pdn);
 			if (edev) {
+				/*
+				 * We allocate pci_dn's for the totalvfs count,
+				 * but only only the vfs that were activated
+				 * have a configured PE.
+				 */
+				if (edev->pe)
+					eeh_rmv_from_parent_pe(edev);
+
 				pdn->edev = NULL;
 				kfree(edev);
 			}
@@ -258,8 +255,8 @@ void remove_dev_pci_data(struct pci_dev *pdev)
 			kfree(pdn);
 		}
 	}
-#endif /* CONFIG_PCI_IOV */
 }
+#endif /* CONFIG_PCI_IOV */
 
 struct pci_dn *pci_add_device_node_info(struct pci_controller *hose,
 					struct device_node *dn)
diff --git a/arch/powerpc/kernel/pci_of_scan.c b/arch/powerpc/kernel/pci_of_scan.c
index f91d7e94872e..c3024f104765 100644
--- a/arch/powerpc/kernel/pci_of_scan.c
+++ b/arch/powerpc/kernel/pci_of_scan.c
@@ -414,7 +414,6 @@ static void __of_scan_bus(struct device_node *node, struct pci_bus *bus,
 	 */
 	if (!rescan_existing)
 		pcibios_setup_bus_self(bus);
-	pcibios_setup_bus_devices(bus);
 
 	/* Now scan child busses */
 	for_each_pci_bridge(dev, bus)
diff --git a/arch/powerpc/kernel/proc_powerpc.c b/arch/powerpc/kernel/proc_powerpc.c
index be3758d54e59..877817471e3c 100644
--- a/arch/powerpc/kernel/proc_powerpc.c
+++ b/arch/powerpc/kernel/proc_powerpc.c
@@ -39,10 +39,10 @@ static int page_map_mmap( struct file *file, struct vm_area_struct *vma )
 	return 0;
 }
 
-static const struct file_operations page_map_fops = {
-	.llseek	= page_map_seek,
-	.read	= page_map_read,
-	.mmap	= page_map_mmap
+static const struct proc_ops page_map_proc_ops = {
+	.proc_lseek	= page_map_seek,
+	.proc_read	= page_map_read,
+	.proc_mmap	= page_map_mmap,
 };
 
 
@@ -51,7 +51,7 @@ static int __init proc_ppc64_init(void)
 	struct proc_dir_entry *pde;
 
 	pde = proc_create_data("powerpc/systemcfg", S_IFREG | 0444, NULL,
-			       &page_map_fops, vdso_data);
+			       &page_map_proc_ops, vdso_data);
 	if (!pde)
 		return 1;
 	proc_set_size(pde, PAGE_SIZE);
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 4df94b6e2f32..fad50db9dcf2 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -740,28 +740,6 @@ static inline int __set_dabr(unsigned long dabr, unsigned long dabrx)
 		mtspr(SPRN_DABRX, dabrx);
 	return 0;
 }
-#elif defined(CONFIG_PPC_8xx)
-static inline int __set_dabr(unsigned long dabr, unsigned long dabrx)
-{
-	unsigned long addr = dabr & ~HW_BRK_TYPE_DABR;
-	unsigned long lctrl1 = 0x90000000; /* compare type: equal on E & F */
-	unsigned long lctrl2 = 0x8e000002; /* watchpoint 1 on cmp E | F */
-
-	if ((dabr & HW_BRK_TYPE_RDWR) == HW_BRK_TYPE_READ)
-		lctrl1 |= 0xa0000;
-	else if ((dabr & HW_BRK_TYPE_RDWR) == HW_BRK_TYPE_WRITE)
-		lctrl1 |= 0xf0000;
-	else if ((dabr & HW_BRK_TYPE_RDWR) == 0)
-		lctrl2 = 0;
-
-	mtspr(SPRN_LCTRL2, 0);
-	mtspr(SPRN_CMPE, addr);
-	mtspr(SPRN_CMPF, addr + 4);
-	mtspr(SPRN_LCTRL1, lctrl1);
-	mtspr(SPRN_LCTRL2, lctrl2);
-
-	return 0;
-}
 #else
 static inline int __set_dabr(unsigned long dabr, unsigned long dabrx)
 {
@@ -782,6 +760,39 @@ static inline int set_dabr(struct arch_hw_breakpoint *brk)
 	return __set_dabr(dabr, dabrx);
 }
 
+static inline int set_breakpoint_8xx(struct arch_hw_breakpoint *brk)
+{
+	unsigned long lctrl1 = LCTRL1_CTE_GT | LCTRL1_CTF_LT | LCTRL1_CRWE_RW |
+			       LCTRL1_CRWF_RW;
+	unsigned long lctrl2 = LCTRL2_LW0EN | LCTRL2_LW0LADC | LCTRL2_SLW0EN;
+	unsigned long start_addr = brk->address & ~HW_BREAKPOINT_ALIGN;
+	unsigned long end_addr = (brk->address + brk->len - 1) | HW_BREAKPOINT_ALIGN;
+
+	if (start_addr == 0)
+		lctrl2 |= LCTRL2_LW0LA_F;
+	else if (end_addr == ~0U)
+		lctrl2 |= LCTRL2_LW0LA_E;
+	else
+		lctrl2 |= LCTRL2_LW0LA_EandF;
+
+	mtspr(SPRN_LCTRL2, 0);
+
+	if ((brk->type & HW_BRK_TYPE_RDWR) == 0)
+		return 0;
+
+	if ((brk->type & HW_BRK_TYPE_RDWR) == HW_BRK_TYPE_READ)
+		lctrl1 |= LCTRL1_CRWE_RO | LCTRL1_CRWF_RO;
+	if ((brk->type & HW_BRK_TYPE_RDWR) == HW_BRK_TYPE_WRITE)
+		lctrl1 |= LCTRL1_CRWE_WO | LCTRL1_CRWF_WO;
+
+	mtspr(SPRN_CMPE, start_addr - 1);
+	mtspr(SPRN_CMPF, end_addr + 1);
+	mtspr(SPRN_LCTRL1, lctrl1);
+	mtspr(SPRN_LCTRL2, lctrl2);
+
+	return 0;
+}
+
 void __set_breakpoint(struct arch_hw_breakpoint *brk)
 {
 	memcpy(this_cpu_ptr(&current_brk), brk, sizeof(*brk));
@@ -789,6 +800,8 @@ void __set_breakpoint(struct arch_hw_breakpoint *brk)
 	if (dawr_enabled())
 		// Power8 or later
 		set_dawr(brk);
+	else if (IS_ENABLED(CONFIG_PPC_8xx))
+		set_breakpoint_8xx(brk);
 	else if (!cpu_has_feature(CPU_FTR_ARCH_207S))
 		// Power7 or earlier
 		set_dabr(brk);
@@ -1264,16 +1277,6 @@ void show_user_instructions(struct pt_regs *regs)
 
 	pc = regs->nip - (NR_INSN_TO_PRINT * 3 / 4 * sizeof(int));
 
-	/*
-	 * Make sure the NIP points at userspace, not kernel text/data or
-	 * elsewhere.
-	 */
-	if (!__access_ok(pc, NR_INSN_TO_PRINT * sizeof(int), USER_DS)) {
-		pr_info("%s[%d]: Bad NIP, not dumping instructions.\n",
-			current->comm, current->pid);
-		return;
-	}
-
 	seq_buf_init(&s, buf, sizeof(buf));
 
 	while (n) {
@@ -1284,7 +1287,7 @@ void show_user_instructions(struct pt_regs *regs)
 		for (i = 0; i < 8 && n; i++, n--, pc += sizeof(int)) {
 			int instr;
 
-			if (probe_kernel_address((const void *)pc, instr)) {
+			if (probe_user_read(&instr, (void __user *)pc, sizeof(instr))) {
 				seq_buf_printf(&s, "XXXXXXXX ");
 				continue;
 			}
diff --git a/arch/powerpc/kernel/rtas-proc.c b/arch/powerpc/kernel/rtas-proc.c
index 487dcd8da4de..2d33f342a293 100644
--- a/arch/powerpc/kernel/rtas-proc.c
+++ b/arch/powerpc/kernel/rtas-proc.c
@@ -159,12 +159,12 @@ static int poweron_open(struct inode *inode, struct file *file)
 	return single_open(file, ppc_rtas_poweron_show, NULL);
 }
 
-static const struct file_operations ppc_rtas_poweron_operations = {
-	.open		= poweron_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.write		= ppc_rtas_poweron_write,
-	.release	= single_release,
+static const struct proc_ops ppc_rtas_poweron_proc_ops = {
+	.proc_open	= poweron_open,
+	.proc_read	= seq_read,
+	.proc_lseek	= seq_lseek,
+	.proc_write	= ppc_rtas_poweron_write,
+	.proc_release	= single_release,
 };
 
 static int progress_open(struct inode *inode, struct file *file)
@@ -172,12 +172,12 @@ static int progress_open(struct inode *inode, struct file *file)
 	return single_open(file, ppc_rtas_progress_show, NULL);
 }
 
-static const struct file_operations ppc_rtas_progress_operations = {
-	.open		= progress_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.write		= ppc_rtas_progress_write,
-	.release	= single_release,
+static const struct proc_ops ppc_rtas_progress_proc_ops = {
+	.proc_open	= progress_open,
+	.proc_read	= seq_read,
+	.proc_lseek	= seq_lseek,
+	.proc_write	= ppc_rtas_progress_write,
+	.proc_release	= single_release,
 };
 
 static int clock_open(struct inode *inode, struct file *file)
@@ -185,12 +185,12 @@ static int clock_open(struct inode *inode, struct file *file)
 	return single_open(file, ppc_rtas_clock_show, NULL);
 }
 
-static const struct file_operations ppc_rtas_clock_operations = {
-	.open		= clock_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.write		= ppc_rtas_clock_write,
-	.release	= single_release,
+static const struct proc_ops ppc_rtas_clock_proc_ops = {
+	.proc_open	= clock_open,
+	.proc_read	= seq_read,
+	.proc_lseek	= seq_lseek,
+	.proc_write	= ppc_rtas_clock_write,
+	.proc_release	= single_release,
 };
 
 static int tone_freq_open(struct inode *inode, struct file *file)
@@ -198,12 +198,12 @@ static int tone_freq_open(struct inode *inode, struct file *file)
 	return single_open(file, ppc_rtas_tone_freq_show, NULL);
 }
 
-static const struct file_operations ppc_rtas_tone_freq_operations = {
-	.open		= tone_freq_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.write		= ppc_rtas_tone_freq_write,
-	.release	= single_release,
+static const struct proc_ops ppc_rtas_tone_freq_proc_ops = {
+	.proc_open	= tone_freq_open,
+	.proc_read	= seq_read,
+	.proc_lseek	= seq_lseek,
+	.proc_write	= ppc_rtas_tone_freq_write,
+	.proc_release	= single_release,
 };
 
 static int tone_volume_open(struct inode *inode, struct file *file)
@@ -211,12 +211,12 @@ static int tone_volume_open(struct inode *inode, struct file *file)
 	return single_open(file, ppc_rtas_tone_volume_show, NULL);
 }
 
-static const struct file_operations ppc_rtas_tone_volume_operations = {
-	.open		= tone_volume_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.write		= ppc_rtas_tone_volume_write,
-	.release	= single_release,
+static const struct proc_ops ppc_rtas_tone_volume_proc_ops = {
+	.proc_open	= tone_volume_open,
+	.proc_read	= seq_read,
+	.proc_lseek	= seq_lseek,
+	.proc_write	= ppc_rtas_tone_volume_write,
+	.proc_release	= single_release,
 };
 
 static int ppc_rtas_find_all_sensors(void);
@@ -238,17 +238,17 @@ static int __init proc_rtas_init(void)
 		return -ENODEV;
 
 	proc_create("powerpc/rtas/progress", 0644, NULL,
-		    &ppc_rtas_progress_operations);
+		    &ppc_rtas_progress_proc_ops);
 	proc_create("powerpc/rtas/clock", 0644, NULL,
-		    &ppc_rtas_clock_operations);
+		    &ppc_rtas_clock_proc_ops);
 	proc_create("powerpc/rtas/poweron", 0644, NULL,
-		    &ppc_rtas_poweron_operations);
+		    &ppc_rtas_poweron_proc_ops);
 	proc_create_single("powerpc/rtas/sensors", 0444, NULL,
 			ppc_rtas_sensors_show);
 	proc_create("powerpc/rtas/frequency", 0644, NULL,
-		    &ppc_rtas_tone_freq_operations);
+		    &ppc_rtas_tone_freq_proc_ops);
 	proc_create("powerpc/rtas/volume", 0644, NULL,
-		    &ppc_rtas_tone_volume_operations);
+		    &ppc_rtas_tone_volume_proc_ops);
 	proc_create_single("powerpc/rtas/rmo_buffer", 0400, NULL,
 			ppc_rtas_rmo_buf_show);
 	return 0;
diff --git a/arch/powerpc/kernel/rtas_flash.c b/arch/powerpc/kernel/rtas_flash.c
index 84f794782c62..a99179d83538 100644
--- a/arch/powerpc/kernel/rtas_flash.c
+++ b/arch/powerpc/kernel/rtas_flash.c
@@ -655,7 +655,7 @@ struct rtas_flash_file {
 	const char *filename;
 	const char *rtas_call_name;
 	int *status;
-	const struct file_operations fops;
+	const struct proc_ops ops;
 };
 
 static const struct rtas_flash_file rtas_flash_files[] = {
@@ -663,36 +663,36 @@ static const struct rtas_flash_file rtas_flash_files[] = {
 		.filename	= "powerpc/rtas/" FIRMWARE_FLASH_NAME,
 		.rtas_call_name	= "ibm,update-flash-64-and-reboot",
 		.status		= &rtas_update_flash_data.status,
-		.fops.read	= rtas_flash_read_msg,
-		.fops.write	= rtas_flash_write,
-		.fops.release	= rtas_flash_release,
-		.fops.llseek	= default_llseek,
+		.ops.proc_read	= rtas_flash_read_msg,
+		.ops.proc_write	= rtas_flash_write,
+		.ops.proc_release = rtas_flash_release,
+		.ops.proc_lseek	= default_llseek,
 	},
 	{
 		.filename	= "powerpc/rtas/" FIRMWARE_UPDATE_NAME,
 		.rtas_call_name	= "ibm,update-flash-64-and-reboot",
 		.status		= &rtas_update_flash_data.status,
-		.fops.read	= rtas_flash_read_num,
-		.fops.write	= rtas_flash_write,
-		.fops.release	= rtas_flash_release,
-		.fops.llseek	= default_llseek,
+		.ops.proc_read	= rtas_flash_read_num,
+		.ops.proc_write	= rtas_flash_write,
+		.ops.proc_release = rtas_flash_release,
+		.ops.proc_lseek	= default_llseek,
 	},
 	{
 		.filename	= "powerpc/rtas/" VALIDATE_FLASH_NAME,
 		.rtas_call_name	= "ibm,validate-flash-image",
 		.status		= &rtas_validate_flash_data.status,
-		.fops.read	= validate_flash_read,
-		.fops.write	= validate_flash_write,
-		.fops.release	= validate_flash_release,
-		.fops.llseek	= default_llseek,
+		.ops.proc_read	= validate_flash_read,
+		.ops.proc_write	= validate_flash_write,
+		.ops.proc_release = validate_flash_release,
+		.ops.proc_lseek	= default_llseek,
 	},
 	{
 		.filename	= "powerpc/rtas/" MANAGE_FLASH_NAME,
 		.rtas_call_name	= "ibm,manage-flash-image",
 		.status		= &rtas_manage_flash_data.status,
-		.fops.read	= manage_flash_read,
-		.fops.write	= manage_flash_write,
-		.fops.llseek	= default_llseek,
+		.ops.proc_read	= manage_flash_read,
+		.ops.proc_write	= manage_flash_write,
+		.ops.proc_lseek	= default_llseek,
 	}
 };
 
@@ -723,7 +723,7 @@ static int __init rtas_flash_init(void)
 		const struct rtas_flash_file *f = &rtas_flash_files[i];
 		int token;
 
-		if (!proc_create(f->filename, 0600, NULL, &f->fops))
+		if (!proc_create(f->filename, 0600, NULL, &f->ops))
 			goto enomem;
 
 		/*
diff --git a/arch/powerpc/kernel/rtasd.c b/arch/powerpc/kernel/rtasd.c
index 8d02e047f96a..89b798f8f656 100644
--- a/arch/powerpc/kernel/rtasd.c
+++ b/arch/powerpc/kernel/rtasd.c
@@ -385,12 +385,12 @@ static __poll_t rtas_log_poll(struct file *file, poll_table * wait)
 	return 0;
 }
 
-static const struct file_operations proc_rtas_log_operations = {
-	.read =		rtas_log_read,
-	.poll =		rtas_log_poll,
-	.open =		rtas_log_open,
-	.release =	rtas_log_release,
-	.llseek =	noop_llseek,
+static const struct proc_ops rtas_log_proc_ops = {
+	.proc_read	= rtas_log_read,
+	.proc_poll	= rtas_log_poll,
+	.proc_open	= rtas_log_open,
+	.proc_release	= rtas_log_release,
+	.proc_lseek	= noop_llseek,
 };
 
 static int enable_surveillance(int timeout)
@@ -572,7 +572,7 @@ static int __init rtas_init(void)
 		return -ENODEV;
 
 	entry = proc_create("powerpc/rtas/error_log", 0400, NULL,
-			    &proc_rtas_log_operations);
+			    &rtas_log_proc_ops);
 	if (!entry)
 		printk(KERN_ERR "Failed to create error_log proc entry\n");
 
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index 488f1eecc0de..7f8c890360fe 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -949,9 +949,6 @@ void __init setup_arch(char **cmdline_p)
 
 	early_memtest(min_low_pfn << PAGE_SHIFT, max_low_pfn << PAGE_SHIFT);
 
-	if (IS_ENABLED(CONFIG_DUMMY_CONSOLE))
-		conswitchp = &dummy_con;
-
 	if (ppc_md.setup_arch)
 		ppc_md.setup_arch();
 
diff --git a/arch/powerpc/kernel/setup.h b/arch/powerpc/kernel/setup.h
index c82577c4b15d..2dd0d9cb5a20 100644
--- a/arch/powerpc/kernel/setup.h
+++ b/arch/powerpc/kernel/setup.h
@@ -35,7 +35,7 @@ void exc_lvl_early_init(void);
 static inline void exc_lvl_early_init(void) { };
 #endif
 
-#ifdef CONFIG_PPC64
+#if defined(CONFIG_PPC64) || defined(CONFIG_VMAP_STACK)
 void emergency_stack_init(void);
 #else
 static inline void emergency_stack_init(void) { };
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index dcffe927f5b9..5b49b26eb154 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -140,7 +140,7 @@ arch_initcall(ppc_init);
 
 static void *__init alloc_stack(void)
 {
-	void *ptr = memblock_alloc(THREAD_SIZE, THREAD_SIZE);
+	void *ptr = memblock_alloc(THREAD_SIZE, THREAD_ALIGN);
 
 	if (!ptr)
 		panic("cannot allocate %d bytes for stack at %pS\n",
@@ -153,6 +153,9 @@ void __init irqstack_early_init(void)
 {
 	unsigned int i;
 
+	if (IS_ENABLED(CONFIG_VMAP_STACK))
+		return;
+
 	/* interrupt stacks must be in lowmem, we get that for free on ppc32
 	 * as the memblock is limited to lowmem by default */
 	for_each_possible_cpu(i) {
@@ -161,6 +164,18 @@ void __init irqstack_early_init(void)
 	}
 }
 
+#ifdef CONFIG_VMAP_STACK
+void *emergency_ctx[NR_CPUS] __ro_after_init;
+
+void __init emergency_stack_init(void)
+{
+	unsigned int i;
+
+	for_each_possible_cpu(i)
+		emergency_ctx[i] = alloc_stack();
+}
+#endif
+
 #if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
 void __init exc_lvl_early_init(void)
 {
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 6104917a282d..e05e6dd67ae6 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -633,7 +633,7 @@ static void *__init alloc_stack(unsigned long limit, int cpu)
 
 	BUILD_BUG_ON(STACK_INT_FRAME_SIZE % 16);
 
-	ptr = memblock_alloc_try_nid(THREAD_SIZE, THREAD_SIZE,
+	ptr = memblock_alloc_try_nid(THREAD_SIZE, THREAD_ALIGN,
 				     MEMBLOCK_LOW_LIMIT, limit,
 				     early_cpu_to_node(cpu));
 	if (!ptr)
diff --git a/arch/powerpc/kernel/syscalls/syscall.tbl b/arch/powerpc/kernel/syscalls/syscall.tbl
index 43f736ed47f2..35b61bfc1b1a 100644
--- a/arch/powerpc/kernel/syscalls/syscall.tbl
+++ b/arch/powerpc/kernel/syscalls/syscall.tbl
@@ -517,3 +517,5 @@
 433	common	fspick				sys_fspick
 434	common	pidfd_open			sys_pidfd_open
 435	nospu	clone3				ppc_clone3
+437	common	openat2				sys_openat2
+438	common	pidfd_getfd			sys_pidfd_getfd
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index 014ff0701f24..82a3438300fd 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -1637,6 +1637,15 @@ void StackOverflow(struct pt_regs *regs)
 	panic("kernel stack overflow");
 }
 
+void stack_overflow_exception(struct pt_regs *regs)
+{
+	enum ctx_state prev_state = exception_enter();
+
+	die("Kernel stack overflow", regs, SIGSEGV);
+
+	exception_exit(prev_state);
+}
+
 void kernel_fp_unavailable_exception(struct pt_regs *regs)
 {
 	enum ctx_state prev_state = exception_enter();
diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c
index eae9ddaecbcf..b9a108411c0d 100644
--- a/arch/powerpc/kernel/vdso.c
+++ b/arch/powerpc/kernel/vdso.c
@@ -728,11 +728,6 @@ static int __init vdso_init(void)
 	 */
 	vdso64_pages = (&vdso64_end - &vdso64_start) >> PAGE_SHIFT;
 	DBG("vdso64_kbase: %p, 0x%x pages\n", vdso64_kbase, vdso64_pages);
-#else
-	vdso_data->dcache_block_size = L1_CACHE_BYTES;
-	vdso_data->dcache_log_block_size = L1_CACHE_SHIFT;
-	vdso_data->icache_block_size = L1_CACHE_BYTES;
-	vdso_data->icache_log_block_size = L1_CACHE_SHIFT;
 #endif /* CONFIG_PPC64 */
 
 
diff --git a/arch/powerpc/kernel/vdso32/Makefile b/arch/powerpc/kernel/vdso32/Makefile
index 06f54d947057..e147bbdc12cd 100644
--- a/arch/powerpc/kernel/vdso32/Makefile
+++ b/arch/powerpc/kernel/vdso32/Makefile
@@ -2,9 +2,7 @@
 
 # List of files in the vdso, has to be asm only for now
 
-obj-vdso32-$(CONFIG_PPC64) = getcpu.o
-obj-vdso32 = sigtramp.o gettimeofday.o datapage.o cacheflush.o note.o \
-		$(obj-vdso32-y)
+obj-vdso32 = sigtramp.o gettimeofday.o datapage.o cacheflush.o note.o getcpu.o
 
 # Build rules
 
diff --git a/arch/powerpc/kernel/vdso32/cacheflush.S b/arch/powerpc/kernel/vdso32/cacheflush.S
index 7f882e7b9f43..3440ddf21c8b 100644
--- a/arch/powerpc/kernel/vdso32/cacheflush.S
+++ b/arch/powerpc/kernel/vdso32/cacheflush.S
@@ -8,7 +8,9 @@
 #include <asm/processor.h>
 #include <asm/ppc_asm.h>
 #include <asm/vdso.h>
+#include <asm/vdso_datapage.h>
 #include <asm/asm-offsets.h>
+#include <asm/cache.h>
 
 	.text
 
@@ -22,42 +24,62 @@
  */
 V_FUNCTION_BEGIN(__kernel_sync_dicache)
   .cfi_startproc
+#ifdef CONFIG_PPC64
 	mflr	r12
   .cfi_register lr,r12
-	mr	r11,r3
-	bl	__get_datapage@local
+	get_datapage	r10, r0
 	mtlr	r12
-	mr	r10,r3
+#endif
 
+#ifdef CONFIG_PPC64
 	lwz	r7,CFG_DCACHE_BLOCKSZ(r10)
 	addi	r5,r7,-1
-	andc	r6,r11,r5		/* round low to line bdy */
+#else
+	li	r5, L1_CACHE_BYTES - 1
+#endif
+	andc	r6,r3,r5		/* round low to line bdy */
 	subf	r8,r6,r4		/* compute length */
 	add	r8,r8,r5		/* ensure we get enough */
+#ifdef CONFIG_PPC64
 	lwz	r9,CFG_DCACHE_LOGBLOCKSZ(r10)
 	srw.	r8,r8,r9		/* compute line count */
+#else
+	srwi.	r8, r8, L1_CACHE_SHIFT
+	mr	r7, r6
+#endif
 	crclr	cr0*4+so
 	beqlr				/* nothing to do? */
 	mtctr	r8
 1:	dcbst	0,r6
+#ifdef CONFIG_PPC64
 	add	r6,r6,r7
+#else
+	addi	r6, r6, L1_CACHE_BYTES
+#endif
 	bdnz	1b
 	sync
 
 /* Now invalidate the instruction cache */
 
+#ifdef CONFIG_PPC64
 	lwz	r7,CFG_ICACHE_BLOCKSZ(r10)
 	addi	r5,r7,-1
-	andc	r6,r11,r5		/* round low to line bdy */
+	andc	r6,r3,r5		/* round low to line bdy */
 	subf	r8,r6,r4		/* compute length */
 	add	r8,r8,r5
 	lwz	r9,CFG_ICACHE_LOGBLOCKSZ(r10)
 	srw.	r8,r8,r9		/* compute line count */
 	crclr	cr0*4+so
 	beqlr				/* nothing to do? */
+#endif
 	mtctr	r8
+#ifdef CONFIG_PPC64
 2:	icbi	0,r6
 	add	r6,r6,r7
+#else
+2:	icbi	0, r7
+	addi	r7, r7, L1_CACHE_BYTES
+#endif
 	bdnz	2b
 	isync
 	li	r3,0
diff --git a/arch/powerpc/kernel/vdso32/datapage.S b/arch/powerpc/kernel/vdso32/datapage.S
index 6c7401bd284e..217bb630f8f9 100644
--- a/arch/powerpc/kernel/vdso32/datapage.S
+++ b/arch/powerpc/kernel/vdso32/datapage.S
@@ -10,35 +10,13 @@
 #include <asm/asm-offsets.h>
 #include <asm/unistd.h>
 #include <asm/vdso.h>
+#include <asm/vdso_datapage.h>
 
 	.text
 	.global	__kernel_datapage_offset;
 __kernel_datapage_offset:
 	.long	0
 
-V_FUNCTION_BEGIN(__get_datapage)
-  .cfi_startproc
-	/* We don't want that exposed or overridable as we want other objects
-	 * to be able to bl directly to here
-	 */
-	.protected __get_datapage
-	.hidden __get_datapage
-
-	mflr	r0
-  .cfi_register lr,r0
-
-	bcl	20,31,data_page_branch
-data_page_branch:
-	mflr	r3
-	mtlr	r0
-	addi	r3, r3, __kernel_datapage_offset-data_page_branch
-	lwz	r0,0(r3)
-  .cfi_restore lr
-	add	r3,r0,r3
-	blr
-  .cfi_endproc
-V_FUNCTION_END(__get_datapage)
-
 /*
  * void *__kernel_get_syscall_map(unsigned int *syscall_count) ;
  *
@@ -52,11 +30,10 @@ V_FUNCTION_BEGIN(__kernel_get_syscall_map)
   .cfi_startproc
 	mflr	r12
   .cfi_register lr,r12
-	mr	r4,r3
-	bl	__get_datapage@local
+	mr.	r4,r3
+	get_datapage	r3, r0
 	mtlr	r12
 	addi	r3,r3,CFG_SYSCALL_MAP32
-	cmpli	cr0,r4,0
 	beqlr
 	li	r0,NR_syscalls
 	stw	r0,0(r4)
@@ -75,7 +52,7 @@ V_FUNCTION_BEGIN(__kernel_get_tbfreq)
   .cfi_startproc
 	mflr	r12
   .cfi_register lr,r12
-	bl	__get_datapage@local
+	get_datapage	r3, r0
 	lwz	r4,(CFG_TB_TICKS_PER_SEC + 4)(r3)
 	lwz	r3,CFG_TB_TICKS_PER_SEC(r3)
 	mtlr	r12
diff --git a/arch/powerpc/kernel/vdso32/getcpu.S b/arch/powerpc/kernel/vdso32/getcpu.S
index 63e914539e1a..ff5e214fec41 100644
--- a/arch/powerpc/kernel/vdso32/getcpu.S
+++ b/arch/powerpc/kernel/vdso32/getcpu.S
@@ -15,6 +15,7 @@
  * int __kernel_getcpu(unsigned *cpu, unsigned *node);
  *
  */
+#if defined(CONFIG_PPC64)
 V_FUNCTION_BEGIN(__kernel_getcpu)
   .cfi_startproc
 	mfspr	r5,SPRN_SPRG_VDSO_READ
@@ -24,10 +25,26 @@ V_FUNCTION_BEGIN(__kernel_getcpu)
 	rlwinm  r7,r5,16,31-15,31-0
 	beq	cr0,1f
 	stw	r6,0(r3)
-1:	beq	cr1,2f
-	stw	r7,0(r4)
-2:	crclr	cr0*4+so
+1:	crclr	cr0*4+so
 	li	r3,0			/* always success */
+	beqlr	cr1
+	stw	r7,0(r4)
+	blr
+  .cfi_endproc
+V_FUNCTION_END(__kernel_getcpu)
+#elif !defined(CONFIG_SMP)
+V_FUNCTION_BEGIN(__kernel_getcpu)
+  .cfi_startproc
+	cmpwi	cr0, r3, 0
+	cmpwi	cr1, r4, 0
+	li	r5, 0
+	beq	cr0, 1f
+	stw	r5, 0(r3)
+1:	li	r3, 0			/* always success */
+	crclr	cr0*4+so
+	beqlr	cr1
+	stw	r5, 0(r4)
 	blr
   .cfi_endproc
 V_FUNCTION_END(__kernel_getcpu)
+#endif
diff --git a/arch/powerpc/kernel/vdso32/gettimeofday.S b/arch/powerpc/kernel/vdso32/gettimeofday.S
index 3306672f57a9..a3951567118a 100644
--- a/arch/powerpc/kernel/vdso32/gettimeofday.S
+++ b/arch/powerpc/kernel/vdso32/gettimeofday.S
@@ -9,6 +9,7 @@
 #include <asm/processor.h>
 #include <asm/ppc_asm.h>
 #include <asm/vdso.h>
+#include <asm/vdso_datapage.h>
 #include <asm/asm-offsets.h>
 #include <asm/unistd.h>
 
@@ -31,28 +32,26 @@ V_FUNCTION_BEGIN(__kernel_gettimeofday)
 	mflr	r12
   .cfi_register lr,r12
 
-	mr	r10,r3			/* r10 saves tv */
+	mr.	r10,r3			/* r10 saves tv */
 	mr	r11,r4			/* r11 saves tz */
-	bl	__get_datapage@local	/* get data page */
-	mr	r9, r3			/* datapage ptr in r9 */
-	cmplwi	r10,0			/* check if tv is NULL */
+	get_datapage	r9, r0
 	beq	3f
-	lis	r7,1000000@ha		/* load up USEC_PER_SEC */
-	addi	r7,r7,1000000@l		/* so we get microseconds in r4 */
+	LOAD_REG_IMMEDIATE(r7, 1000000)	/* load up USEC_PER_SEC */
 	bl	__do_get_tspec@local	/* get sec/usec from tb & kernel */
 	stw	r3,TVAL32_TV_SEC(r10)
 	stw	r4,TVAL32_TV_USEC(r10)
 
 3:	cmplwi	r11,0			/* check if tz is NULL */
-	beq	1f
+	mtlr	r12
+	crclr	cr0*4+so
+	li	r3,0
+	beqlr
+
 	lwz	r4,CFG_TZ_MINUTEWEST(r9)/* fill tz */
 	lwz	r5,CFG_TZ_DSTTIME(r9)
 	stw	r4,TZONE_TZ_MINWEST(r11)
 	stw	r5,TZONE_TZ_DSTTIME(r11)
 
-1:	mtlr	r12
-	crclr	cr0*4+so
-	li	r3,0
 	blr
   .cfi_endproc
 V_FUNCTION_END(__kernel_gettimeofday)
@@ -69,17 +68,23 @@ V_FUNCTION_BEGIN(__kernel_clock_gettime)
 	cmpli	cr0,r3,CLOCK_REALTIME
 	cmpli	cr1,r3,CLOCK_MONOTONIC
 	cror	cr0*4+eq,cr0*4+eq,cr1*4+eq
-	bne	cr0,99f
+
+	cmpli	cr5,r3,CLOCK_REALTIME_COARSE
+	cmpli	cr6,r3,CLOCK_MONOTONIC_COARSE
+	cror	cr5*4+eq,cr5*4+eq,cr6*4+eq
+
+	cror	cr0*4+eq,cr0*4+eq,cr5*4+eq
+	bne	cr0, .Lgettime_fallback
 
 	mflr	r12			/* r12 saves lr */
   .cfi_register lr,r12
 	mr	r11,r4			/* r11 saves tp */
-	bl	__get_datapage@local	/* get data page */
-	mr	r9,r3			/* datapage ptr in r9 */
-	lis	r7,NSEC_PER_SEC@h	/* want nanoseconds */
-	ori	r7,r7,NSEC_PER_SEC@l
-50:	bl	__do_get_tspec@local	/* get sec/nsec from tb & kernel */
-	bne	cr1,80f			/* not monotonic -> all done */
+	get_datapage	r9, r0
+	LOAD_REG_IMMEDIATE(r7, NSEC_PER_SEC)	/* load up NSEC_PER_SEC */
+	beq	cr5, .Lcoarse_clocks
+.Lprecise_clocks:
+	bl	__do_get_tspec@local	/* get sec/nsec from tb & kernel */
+	bne	cr1, .Lfinish		/* not monotonic -> all done */
 
 	/*
 	 * CLOCK_MONOTONIC
@@ -103,12 +108,53 @@ V_FUNCTION_BEGIN(__kernel_clock_gettime)
 	add	r9,r9,r0
 	lwz	r0,(CFG_TB_UPDATE_COUNT+LOPART)(r9)
         cmpl    cr0,r8,r0		/* check if updated */
-	bne-	50b
+	bne-	.Lprecise_clocks
+	b	.Lfinish_monotonic
+
+	/*
+	 * For coarse clocks we get data directly from the vdso data page, so
+	 * we don't need to call __do_get_tspec, but we still need to do the
+	 * counter trick.
+	 */
+.Lcoarse_clocks:
+	lwz	r8,(CFG_TB_UPDATE_COUNT+LOPART)(r9)
+	andi.	r0,r8,1                 /* pending update ? loop */
+	bne-	.Lcoarse_clocks
+	add	r9,r9,r0		/* r0 is already 0 */
+
+	/*
+	 * CLOCK_REALTIME_COARSE, below values are needed for MONOTONIC_COARSE
+	 * too
+	 */
+	lwz	r3,STAMP_XTIME_SEC+LOPART(r9)
+	lwz	r4,STAMP_XTIME_NSEC+LOPART(r9)
+	bne	cr6,1f
+
+	/* CLOCK_MONOTONIC_COARSE */
+	lwz	r5,(WTOM_CLOCK_SEC+LOPART)(r9)
+	lwz	r6,WTOM_CLOCK_NSEC(r9)
+
+	/* check if counter has updated */
+	or	r0,r6,r5
+1:	or	r0,r0,r3
+	or	r0,r0,r4
+	xor	r0,r0,r0
+	add	r3,r3,r0
+	lwz	r0,CFG_TB_UPDATE_COUNT+LOPART(r9)
+	cmpl	cr0,r0,r8               /* check if updated */
+	bne-	.Lcoarse_clocks
+
+	/* Counter has not updated, so continue calculating proper values for
+	 * sec and nsec if monotonic coarse, or just return with the proper
+	 * values for realtime.
+	 */
+	bne	cr6, .Lfinish
 
 	/* Calculate and store result. Note that this mimics the C code,
 	 * which may cause funny results if nsec goes negative... is that
 	 * possible at all ?
 	 */
+.Lfinish_monotonic:
 	add	r3,r3,r5
 	add	r4,r4,r6
 	cmpw	cr0,r4,r7
@@ -116,11 +162,12 @@ V_FUNCTION_BEGIN(__kernel_clock_gettime)
 	blt	1f
 	subf	r4,r7,r4
 	addi	r3,r3,1
-1:	bge	cr1,80f
+1:	bge	cr1, .Lfinish
 	addi	r3,r3,-1
 	add	r4,r4,r7
 
-80:	stw	r3,TSPC32_TV_SEC(r11)
+.Lfinish:
+	stw	r3,TSPC32_TV_SEC(r11)
 	stw	r4,TSPC32_TV_NSEC(r11)
 
 	mtlr	r12
@@ -131,7 +178,7 @@ V_FUNCTION_BEGIN(__kernel_clock_gettime)
 	/*
 	 * syscall fallback
 	 */
-99:
+.Lgettime_fallback:
 	li	r0,__NR_clock_gettime
   .cfi_restore lr
 	sc
@@ -149,17 +196,20 @@ V_FUNCTION_END(__kernel_clock_gettime)
 V_FUNCTION_BEGIN(__kernel_clock_getres)
   .cfi_startproc
 	/* Check for supported clock IDs */
-	cmpwi	cr0,r3,CLOCK_REALTIME
-	cmpwi	cr1,r3,CLOCK_MONOTONIC
-	cror	cr0*4+eq,cr0*4+eq,cr1*4+eq
-	bne	cr0,99f
+	cmplwi	cr0, r3, CLOCK_MAX
+	cmpwi	cr1, r3, CLOCK_REALTIME_COARSE
+	cmpwi	cr7, r3, CLOCK_MONOTONIC_COARSE
+	bgt	cr0, 99f
+	LOAD_REG_IMMEDIATE(r5, KTIME_LOW_RES)
+	beq	cr1, 1f
+	beq	cr7, 1f
 
 	mflr	r12
   .cfi_register lr,r12
-	bl	__get_datapage@local	/* get data page */
+	get_datapage	r3, r0
 	lwz	r5, CLOCK_HRTIMER_RES(r3)
 	mtlr	r12
-	li	r3,0
+1:	li	r3,0
 	cmpli	cr0,r4,0
 	crclr	cr0*4+so
 	beqlr
@@ -168,11 +218,11 @@ V_FUNCTION_BEGIN(__kernel_clock_getres)
 	blr
 
 	/*
-	 * syscall fallback
+	 * invalid clock
 	 */
 99:
-	li	r0,__NR_clock_getres
-	sc
+	li	r3, EINVAL
+	crset	so
 	blr
   .cfi_endproc
 V_FUNCTION_END(__kernel_clock_getres)
@@ -190,16 +240,15 @@ V_FUNCTION_BEGIN(__kernel_time)
   .cfi_register lr,r12
 
 	mr	r11,r3			/* r11 holds t */
-	bl	__get_datapage@local
-	mr	r9, r3			/* datapage ptr in r9 */
+	get_datapage	r9, r0
 
 	lwz	r3,STAMP_XTIME_SEC+LOPART(r9)
 
 	cmplwi	r11,0			/* check if t is NULL */
-	beq	2f
-	stw	r3,0(r11)		/* store result at *t */
-2:	mtlr	r12
+	mtlr	r12
 	crclr	cr0*4+so
+	beqlr
+	stw	r3,0(r11)		/* store result at *t */
 	blr
   .cfi_endproc
 V_FUNCTION_END(__kernel_time)
diff --git a/arch/powerpc/kernel/vdso32/vdso32.lds.S b/arch/powerpc/kernel/vdso32/vdso32.lds.S
index 00c025ba4a92..5206c2eb2a1d 100644
--- a/arch/powerpc/kernel/vdso32/vdso32.lds.S
+++ b/arch/powerpc/kernel/vdso32/vdso32.lds.S
@@ -155,7 +155,7 @@ VERSION
 		__kernel_sync_dicache_p5;
 		__kernel_sigtramp32;
 		__kernel_sigtramp_rt32;
-#ifdef CONFIG_PPC64
+#if defined(CONFIG_PPC64) || !defined(CONFIG_SMP)
 		__kernel_getcpu;
 #endif
 
diff --git a/arch/powerpc/kernel/vector.S b/arch/powerpc/kernel/vector.S
index 8eb867dbad5f..25c14a0981bf 100644
--- a/arch/powerpc/kernel/vector.S
+++ b/arch/powerpc/kernel/vector.S
@@ -67,6 +67,9 @@ _GLOBAL(load_up_altivec)
 #ifdef CONFIG_PPC32
 	mfspr	r5,SPRN_SPRG_THREAD		/* current task's THREAD (phys) */
 	oris	r9,r9,MSR_VEC@h
+#ifdef CONFIG_VMAP_STACK
+	tovirt(r5, r5)
+#endif
 #else
 	ld	r4,PACACURRENT(r13)
 	addi	r5,r4,THREAD		/* Get THREAD */
diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S
index 8834220036a5..b4c89a1acebb 100644
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -323,7 +323,7 @@ SECTIONS
 #endif
 
 	/* The initial task and kernel stack */
-	INIT_TASK_DATA_SECTION(THREAD_SIZE)
+	INIT_TASK_DATA_SECTION(THREAD_ALIGN)
 
 	.data..page_aligned : AT(ADDR(.data..page_aligned) - LOAD_OFFSET) {
 		PAGE_ALIGNED_DATA(PAGE_SIZE)
diff --git a/arch/powerpc/kvm/book3s.c b/arch/powerpc/kvm/book3s.c
index 58a59ee998e2..d07a8e12fa15 100644
--- a/arch/powerpc/kvm/book3s.c
+++ b/arch/powerpc/kvm/book3s.c
@@ -471,11 +471,6 @@ int kvmppc_load_last_inst(struct kvm_vcpu *vcpu,
 }
 EXPORT_SYMBOL_GPL(kvmppc_load_last_inst);
 
-int kvm_arch_vcpu_setup(struct kvm_vcpu *vcpu)
-{
-	return 0;
-}
-
 int kvmppc_subarch_vcpu_init(struct kvm_vcpu *vcpu)
 {
 	return 0;
@@ -789,9 +784,9 @@ void kvmppc_decrementer_func(struct kvm_vcpu *vcpu)
 	kvm_vcpu_kick(vcpu);
 }
 
-struct kvm_vcpu *kvmppc_core_vcpu_create(struct kvm *kvm, unsigned int id)
+int kvmppc_core_vcpu_create(struct kvm_vcpu *vcpu)
 {
-	return kvm->arch.kvm_ops->vcpu_create(kvm, id);
+	return vcpu->kvm->arch.kvm_ops->vcpu_create(vcpu);
 }
 
 void kvmppc_core_vcpu_free(struct kvm_vcpu *vcpu)
diff --git a/arch/powerpc/kvm/book3s_64_mmu_hv.c b/arch/powerpc/kvm/book3s_64_mmu_hv.c
index d381526c5c9b..6c372f5c61b6 100644
--- a/arch/powerpc/kvm/book3s_64_mmu_hv.c
+++ b/arch/powerpc/kvm/book3s_64_mmu_hv.c
@@ -284,7 +284,7 @@ static long kvmppc_virtmode_do_h_enter(struct kvm *kvm, unsigned long flags,
 	/* Protect linux PTE lookup from page table destruction */
 	rcu_read_lock_sched();	/* this disables preemption too */
 	ret = kvmppc_do_h_enter(kvm, flags, pte_index, pteh, ptel,
-				current->mm->pgd, false, pte_idx_ret);
+				kvm->mm->pgd, false, pte_idx_ret);
 	rcu_read_unlock_sched();
 	if (ret == H_TOO_HARD) {
 		/* this can't happen */
@@ -573,7 +573,7 @@ int kvmppc_book3s_hv_page_fault(struct kvm_run *run, struct kvm_vcpu *vcpu,
 	is_ci = false;
 	pfn = 0;
 	page = NULL;
-	mm = current->mm;
+	mm = kvm->mm;
 	pte_size = PAGE_SIZE;
 	writing = (dsisr & DSISR_ISSTORE) != 0;
 	/* If writing != 0, then the HPTE must allow writing, if we get here */
diff --git a/arch/powerpc/kvm/book3s_64_mmu_radix.c b/arch/powerpc/kvm/book3s_64_mmu_radix.c
index da857c8ba6e4..803940d79b73 100644
--- a/arch/powerpc/kvm/book3s_64_mmu_radix.c
+++ b/arch/powerpc/kvm/book3s_64_mmu_radix.c
@@ -63,12 +63,10 @@ unsigned long __kvmhv_copy_tofrom_guest_radix(int lpid, int pid,
 	}
 	isync();
 
-	pagefault_disable();
 	if (is_load)
-		ret = raw_copy_from_user(to, from, n);
+		ret = probe_user_read(to, (const void __user *)from, n);
 	else
-		ret = raw_copy_to_user(to, from, n);
-	pagefault_enable();
+		ret = probe_user_write((void __user *)to, from, n);
 
 	/* switch the pid first to avoid running host with unallocated pid */
 	if (quadrant == 1 && pid != old_pid)
@@ -1102,7 +1100,7 @@ void kvmppc_radix_flush_memslot(struct kvm *kvm,
 	unsigned int shift;
 
 	if (kvm->arch.secure_guest & KVMPPC_SECURE_INIT_START)
-		kvmppc_uvmem_drop_pages(memslot, kvm);
+		kvmppc_uvmem_drop_pages(memslot, kvm, true);
 
 	if (kvm->arch.secure_guest & KVMPPC_SECURE_INIT_DONE)
 		return;
diff --git a/arch/powerpc/kvm/book3s_64_vio.c b/arch/powerpc/kvm/book3s_64_vio.c
index 883a66e76638..ee6c103bb7d5 100644
--- a/arch/powerpc/kvm/book3s_64_vio.c
+++ b/arch/powerpc/kvm/book3s_64_vio.c
@@ -253,10 +253,11 @@ static int kvm_spapr_tce_release(struct inode *inode, struct file *filp)
 		}
 	}
 
+	account_locked_vm(kvm->mm,
+		kvmppc_stt_pages(kvmppc_tce_pages(stt->size)), false);
+
 	kvm_put_kvm(stt->kvm);
 
-	account_locked_vm(current->mm,
-		kvmppc_stt_pages(kvmppc_tce_pages(stt->size)), false);
 	call_rcu(&stt->rcu, release_spapr_tce_table);
 
 	return 0;
@@ -272,6 +273,7 @@ long kvm_vm_ioctl_create_spapr_tce(struct kvm *kvm,
 {
 	struct kvmppc_spapr_tce_table *stt = NULL;
 	struct kvmppc_spapr_tce_table *siter;
+	struct mm_struct *mm = kvm->mm;
 	unsigned long npages, size = args->size;
 	int ret = -ENOMEM;
 
@@ -280,7 +282,7 @@ long kvm_vm_ioctl_create_spapr_tce(struct kvm *kvm,
 		return -EINVAL;
 
 	npages = kvmppc_tce_pages(size);
-	ret = account_locked_vm(current->mm, kvmppc_stt_pages(npages), true);
+	ret = account_locked_vm(mm, kvmppc_stt_pages(npages), true);
 	if (ret)
 		return ret;
 
@@ -326,7 +328,7 @@ long kvm_vm_ioctl_create_spapr_tce(struct kvm *kvm,
 
 	kfree(stt);
  fail_acct:
-	account_locked_vm(current->mm, kvmppc_stt_pages(npages), false);
+	account_locked_vm(mm, kvmppc_stt_pages(npages), false);
 	return ret;
 }
 
diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index 6ff3f896d908..2cefd071b848 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -1091,6 +1091,9 @@ int kvmppc_pseries_do_hcall(struct kvm_vcpu *vcpu)
 	case H_SVM_INIT_DONE:
 		ret = kvmppc_h_svm_init_done(vcpu->kvm);
 		break;
+	case H_SVM_INIT_ABORT:
+		ret = kvmppc_h_svm_init_abort(vcpu->kvm);
+		break;
 
 	default:
 		return RESUME_HOST;
@@ -2271,22 +2274,16 @@ static void debugfs_vcpu_init(struct kvm_vcpu *vcpu, unsigned int id)
 }
 #endif /* CONFIG_KVM_BOOK3S_HV_EXIT_TIMING */
 
-static struct kvm_vcpu *kvmppc_core_vcpu_create_hv(struct kvm *kvm,
-						   unsigned int id)
+static int kvmppc_core_vcpu_create_hv(struct kvm_vcpu *vcpu)
 {
-	struct kvm_vcpu *vcpu;
 	int err;
 	int core;
 	struct kvmppc_vcore *vcore;
+	struct kvm *kvm;
+	unsigned int id;
 
-	err = -ENOMEM;
-	vcpu = kmem_cache_zalloc(kvm_vcpu_cache, GFP_KERNEL);
-	if (!vcpu)
-		goto out;
-
-	err = kvm_vcpu_init(vcpu, kvm, id);
-	if (err)
-		goto free_vcpu;
+	kvm = vcpu->kvm;
+	id = vcpu->vcpu_id;
 
 	vcpu->arch.shared = &vcpu->arch.shregs;
 #ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE
@@ -2368,7 +2365,7 @@ static struct kvm_vcpu *kvmppc_core_vcpu_create_hv(struct kvm *kvm,
 	mutex_unlock(&kvm->lock);
 
 	if (!vcore)
-		goto free_vcpu;
+		return err;
 
 	spin_lock(&vcore->lock);
 	++vcore->num_threads;
@@ -2383,12 +2380,7 @@ static struct kvm_vcpu *kvmppc_core_vcpu_create_hv(struct kvm *kvm,
 
 	debugfs_vcpu_init(vcpu, id);
 
-	return vcpu;
-
-free_vcpu:
-	kmem_cache_free(kvm_vcpu_cache, vcpu);
-out:
-	return ERR_PTR(err);
+	return 0;
 }
 
 static int kvmhv_set_smt_mode(struct kvm *kvm, unsigned long smt_mode,
@@ -2442,8 +2434,6 @@ static void kvmppc_core_vcpu_free_hv(struct kvm_vcpu *vcpu)
 	unpin_vpa(vcpu->kvm, &vcpu->arch.slb_shadow);
 	unpin_vpa(vcpu->kvm, &vcpu->arch.vpa);
 	spin_unlock(&vcpu->arch.vpa_update_lock);
-	kvm_vcpu_uninit(vcpu);
-	kmem_cache_free(kvm_vcpu_cache, vcpu);
 }
 
 static int kvmppc_core_check_requests_hv(struct kvm_vcpu *vcpu)
@@ -4285,7 +4275,7 @@ static int kvmppc_vcpu_run_hv(struct kvm_run *run, struct kvm_vcpu *vcpu)
 	user_vrsave = mfspr(SPRN_VRSAVE);
 
 	vcpu->arch.wqp = &vcpu->arch.vcore->wq;
-	vcpu->arch.pgdir = current->mm->pgd;
+	vcpu->arch.pgdir = kvm->mm->pgd;
 	vcpu->arch.state = KVMPPC_VCPU_BUSY_IN_HOST;
 
 	do {
@@ -4640,14 +4630,14 @@ static int kvmppc_hv_setup_htab_rma(struct kvm_vcpu *vcpu)
 
 	/* Look up the VMA for the start of this memory slot */
 	hva = memslot->userspace_addr;
-	down_read(&current->mm->mmap_sem);
-	vma = find_vma(current->mm, hva);
+	down_read(&kvm->mm->mmap_sem);
+	vma = find_vma(kvm->mm, hva);
 	if (!vma || vma->vm_start > hva || (vma->vm_flags & VM_IO))
 		goto up_out;
 
 	psize = vma_kernel_pagesize(vma);
 
-	up_read(&current->mm->mmap_sem);
+	up_read(&kvm->mm->mmap_sem);
 
 	/* We can handle 4k, 64k or 16M pages in the VRMA */
 	if (psize >= 0x1000000)
@@ -4680,7 +4670,7 @@ static int kvmppc_hv_setup_htab_rma(struct kvm_vcpu *vcpu)
 	return err;
 
  up_out:
-	up_read(&current->mm->mmap_sem);
+	up_read(&kvm->mm->mmap_sem);
 	goto out_srcu;
 }
 
@@ -5477,7 +5467,7 @@ static int kvmhv_svm_off(struct kvm *kvm)
 			continue;
 
 		kvm_for_each_memslot(memslot, slots) {
-			kvmppc_uvmem_drop_pages(memslot, kvm);
+			kvmppc_uvmem_drop_pages(memslot, kvm, true);
 			uv_unregister_mem_slot(kvm->arch.lpid, memslot->id);
 		}
 	}
diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
index c6fbbd29bd87..dbc2fecc37f0 100644
--- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S
+++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
@@ -1801,6 +1801,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300)
 	tlbsync
 	ptesync
 
+BEGIN_FTR_SECTION
 	/* Radix: Handle the case where the guest used an illegal PID */
 	LOAD_REG_ADDR(r4, mmu_base_pid)
 	lwz	r3, VCPU_GUEST_PID(r9)
@@ -1830,6 +1831,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300)
 	addi	r7,r7,0x1000
 	bdnz	1b
 	ptesync
+END_FTR_SECTION_IFSET(CPU_FTR_P9_RADIX_PREFETCH_BUG)
 
 2:
 #endif /* CONFIG_PPC_RADIX_MMU */
diff --git a/arch/powerpc/kvm/book3s_hv_uvmem.c b/arch/powerpc/kvm/book3s_hv_uvmem.c
index 2de264fc3156..79b1202b1c62 100644
--- a/arch/powerpc/kvm/book3s_hv_uvmem.c
+++ b/arch/powerpc/kvm/book3s_hv_uvmem.c
@@ -258,7 +258,7 @@ unsigned long kvmppc_h_svm_init_done(struct kvm *kvm)
  * QEMU page table with normal PTEs from newly allocated pages.
  */
 void kvmppc_uvmem_drop_pages(const struct kvm_memory_slot *free,
-			     struct kvm *kvm)
+			     struct kvm *kvm, bool skip_page_out)
 {
 	int i;
 	struct kvmppc_uvmem_page_pvt *pvt;
@@ -276,7 +276,7 @@ void kvmppc_uvmem_drop_pages(const struct kvm_memory_slot *free,
 
 		uvmem_page = pfn_to_page(uvmem_pfn);
 		pvt = uvmem_page->zone_device_data;
-		pvt->skip_page_out = true;
+		pvt->skip_page_out = skip_page_out;
 		mutex_unlock(&kvm->arch.uvmem_lock);
 
 		pfn = gfn_to_pfn(kvm, gfn);
@@ -286,6 +286,34 @@ void kvmppc_uvmem_drop_pages(const struct kvm_memory_slot *free,
 	}
 }
 
+unsigned long kvmppc_h_svm_init_abort(struct kvm *kvm)
+{
+	int srcu_idx;
+	struct kvm_memory_slot *memslot;
+
+	/*
+	 * Expect to be called only after INIT_START and before INIT_DONE.
+	 * If INIT_DONE was completed, use normal VM termination sequence.
+	 */
+	if (!(kvm->arch.secure_guest & KVMPPC_SECURE_INIT_START))
+		return H_UNSUPPORTED;
+
+	if (kvm->arch.secure_guest & KVMPPC_SECURE_INIT_DONE)
+		return H_STATE;
+
+	srcu_idx = srcu_read_lock(&kvm->srcu);
+
+	kvm_for_each_memslot(memslot, kvm_memslots(kvm))
+		kvmppc_uvmem_drop_pages(memslot, kvm, false);
+
+	srcu_read_unlock(&kvm->srcu, srcu_idx);
+
+	kvm->arch.secure_guest = 0;
+	uv_svm_terminate(kvm->arch.lpid);
+
+	return H_PARAMETER;
+}
+
 /*
  * Get a free device PFN from the pool
  *
@@ -543,7 +571,7 @@ kvmppc_svm_page_out(struct vm_area_struct *vma, unsigned long start,
 
 	ret = migrate_vma_setup(&mig);
 	if (ret)
-		return ret;
+		goto out;
 
 	spage = migrate_pfn_to_page(*mig.src);
 	if (!spage || !(*mig.src & MIGRATE_PFN_MIGRATE))
diff --git a/arch/powerpc/kvm/book3s_pr.c b/arch/powerpc/kvm/book3s_pr.c
index ce4fcf76e53e..729a0f12a752 100644
--- a/arch/powerpc/kvm/book3s_pr.c
+++ b/arch/powerpc/kvm/book3s_pr.c
@@ -1744,21 +1744,17 @@ static int kvmppc_set_one_reg_pr(struct kvm_vcpu *vcpu, u64 id,
 	return r;
 }
 
-static struct kvm_vcpu *kvmppc_core_vcpu_create_pr(struct kvm *kvm,
-						   unsigned int id)
+static int kvmppc_core_vcpu_create_pr(struct kvm_vcpu *vcpu)
 {
 	struct kvmppc_vcpu_book3s *vcpu_book3s;
-	struct kvm_vcpu *vcpu;
-	int err = -ENOMEM;
 	unsigned long p;
+	int err;
 
-	vcpu = kmem_cache_zalloc(kvm_vcpu_cache, GFP_KERNEL);
-	if (!vcpu)
-		goto out;
+	err = -ENOMEM;
 
 	vcpu_book3s = vzalloc(sizeof(struct kvmppc_vcpu_book3s));
 	if (!vcpu_book3s)
-		goto free_vcpu;
+		goto out;
 	vcpu->arch.book3s = vcpu_book3s;
 
 #ifdef CONFIG_KVM_BOOK3S_32_HANDLER
@@ -1768,14 +1764,9 @@ static struct kvm_vcpu *kvmppc_core_vcpu_create_pr(struct kvm *kvm,
 		goto free_vcpu3s;
 #endif
 
-	err = kvm_vcpu_init(vcpu, kvm, id);
-	if (err)
-		goto free_shadow_vcpu;
-
-	err = -ENOMEM;
 	p = __get_free_page(GFP_KERNEL|__GFP_ZERO);
 	if (!p)
-		goto uninit_vcpu;
+		goto free_shadow_vcpu;
 	vcpu->arch.shared = (void *)p;
 #ifdef CONFIG_PPC_BOOK3S_64
 	/* Always start the shared struct in native endian mode */
@@ -1806,22 +1797,20 @@ static struct kvm_vcpu *kvmppc_core_vcpu_create_pr(struct kvm *kvm,
 
 	err = kvmppc_mmu_init(vcpu);
 	if (err < 0)
-		goto uninit_vcpu;
+		goto free_shared_page;
 
-	return vcpu;
+	return 0;
 
-uninit_vcpu:
-	kvm_vcpu_uninit(vcpu);
+free_shared_page:
+	free_page((unsigned long)vcpu->arch.shared);
 free_shadow_vcpu:
 #ifdef CONFIG_KVM_BOOK3S_32_HANDLER
 	kfree(vcpu->arch.shadow_vcpu);
 free_vcpu3s:
 #endif
 	vfree(vcpu_book3s);
-free_vcpu:
-	kmem_cache_free(kvm_vcpu_cache, vcpu);
 out:
-	return ERR_PTR(err);
+	return err;
 }
 
 static void kvmppc_core_vcpu_free_pr(struct kvm_vcpu *vcpu)
@@ -1829,12 +1818,10 @@ static void kvmppc_core_vcpu_free_pr(struct kvm_vcpu *vcpu)
 	struct kvmppc_vcpu_book3s *vcpu_book3s = to_book3s(vcpu);
 
 	free_page((unsigned long)vcpu->arch.shared & PAGE_MASK);
-	kvm_vcpu_uninit(vcpu);
 #ifdef CONFIG_KVM_BOOK3S_32_HANDLER
 	kfree(vcpu->arch.shadow_vcpu);
 #endif
 	vfree(vcpu_book3s);
-	kmem_cache_free(kvm_vcpu_cache, vcpu);
 }
 
 static int kvmppc_vcpu_run_pr(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
@@ -2030,6 +2017,7 @@ static int kvm_vm_ioctl_get_smmu_info_pr(struct kvm *kvm,
 {
 	/* We should not get called */
 	BUG();
+	return 0;
 }
 #endif /* CONFIG_PPC64 */
 
diff --git a/arch/powerpc/kvm/book3s_xive.c b/arch/powerpc/kvm/book3s_xive.c
index 66858b7d3c6b..85215e79db42 100644
--- a/arch/powerpc/kvm/book3s_xive.c
+++ b/arch/powerpc/kvm/book3s_xive.c
@@ -484,7 +484,7 @@ static void xive_finish_unmask(struct kvmppc_xive *xive,
 	kvmppc_xive_select_irq(state, &hw_num, &xd);
 
 	/*
-	 * See command in xive_lock_and_mask() concerning masking
+	 * See comment in xive_lock_and_mask() concerning masking
 	 * via firmware.
 	 */
 	if (xd->flags & OPAL_XIVE_IRQ_MASK_VIA_FW) {
diff --git a/arch/powerpc/kvm/book3s_xive_native.c b/arch/powerpc/kvm/book3s_xive_native.c
index d83adb1e1490..6ef0151ff70a 100644
--- a/arch/powerpc/kvm/book3s_xive_native.c
+++ b/arch/powerpc/kvm/book3s_xive_native.c
@@ -631,7 +631,7 @@ static int kvmppc_xive_native_set_queue_config(struct kvmppc_xive *xive,
 	srcu_idx = srcu_read_lock(&kvm->srcu);
 	gfn = gpa_to_gfn(kvm_eq.qaddr);
 
-	page_size = kvm_host_page_size(kvm, gfn);
+	page_size = kvm_host_page_size(vcpu, gfn);
 	if (1ull << kvm_eq.qshift > page_size) {
 		srcu_read_unlock(&kvm->srcu, srcu_idx);
 		pr_warn("Incompatible host page size %lx!\n", page_size);
diff --git a/arch/powerpc/kvm/booke.c b/arch/powerpc/kvm/booke.c
index be9a45874194..7b27604adadf 100644
--- a/arch/powerpc/kvm/booke.c
+++ b/arch/powerpc/kvm/booke.c
@@ -775,7 +775,7 @@ int kvmppc_vcpu_run(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
 	debug = current->thread.debug;
 	current->thread.debug = vcpu->arch.dbg_reg;
 
-	vcpu->arch.pgdir = current->mm->pgd;
+	vcpu->arch.pgdir = vcpu->kvm->mm->pgd;
 	kvmppc_fix_ee_before_entry();
 
 	ret = __kvmppc_vcpu_run(kvm_run, vcpu);
@@ -1377,36 +1377,6 @@ static void kvmppc_set_tsr(struct kvm_vcpu *vcpu, u32 new_tsr)
 	update_timer_ints(vcpu);
 }
 
-/* Initial guest state: 16MB mapping 0 -> 0, PC = 0, MSR = 0, R1 = 16MB */
-int kvm_arch_vcpu_setup(struct kvm_vcpu *vcpu)
-{
-	int i;
-	int r;
-
-	vcpu->arch.regs.nip = 0;
-	vcpu->arch.shared->pir = vcpu->vcpu_id;
-	kvmppc_set_gpr(vcpu, 1, (16<<20) - 8); /* -8 for the callee-save LR slot */
-	kvmppc_set_msr(vcpu, 0);
-
-#ifndef CONFIG_KVM_BOOKE_HV
-	vcpu->arch.shadow_msr = MSR_USER | MSR_IS | MSR_DS;
-	vcpu->arch.shadow_pid = 1;
-	vcpu->arch.shared->msr = 0;
-#endif
-
-	/* Eye-catching numbers so we know if the guest takes an interrupt
-	 * before it's programmed its own IVPR/IVORs. */
-	vcpu->arch.ivpr = 0x55550000;
-	for (i = 0; i < BOOKE_IRQPRIO_MAX; i++)
-		vcpu->arch.ivor[i] = 0x7700 | i * 4;
-
-	kvmppc_init_timing_stats(vcpu);
-
-	r = kvmppc_core_vcpu_setup(vcpu);
-	kvmppc_sanity_check(vcpu);
-	return r;
-}
-
 int kvmppc_subarch_vcpu_init(struct kvm_vcpu *vcpu)
 {
 	/* setup watchdog timer once */
@@ -2114,9 +2084,40 @@ int kvmppc_core_init_vm(struct kvm *kvm)
 	return kvm->arch.kvm_ops->init_vm(kvm);
 }
 
-struct kvm_vcpu *kvmppc_core_vcpu_create(struct kvm *kvm, unsigned int id)
+int kvmppc_core_vcpu_create(struct kvm_vcpu *vcpu)
 {
-	return kvm->arch.kvm_ops->vcpu_create(kvm, id);
+	int i;
+	int r;
+
+	r = vcpu->kvm->arch.kvm_ops->vcpu_create(vcpu);
+	if (r)
+		return r;
+
+	/* Initial guest state: 16MB mapping 0 -> 0, PC = 0, MSR = 0, R1 = 16MB */
+	vcpu->arch.regs.nip = 0;
+	vcpu->arch.shared->pir = vcpu->vcpu_id;
+	kvmppc_set_gpr(vcpu, 1, (16<<20) - 8); /* -8 for the callee-save LR slot */
+	kvmppc_set_msr(vcpu, 0);
+
+#ifndef CONFIG_KVM_BOOKE_HV
+	vcpu->arch.shadow_msr = MSR_USER | MSR_IS | MSR_DS;
+	vcpu->arch.shadow_pid = 1;
+	vcpu->arch.shared->msr = 0;
+#endif
+
+	/* Eye-catching numbers so we know if the guest takes an interrupt
+	 * before it's programmed its own IVPR/IVORs. */
+	vcpu->arch.ivpr = 0x55550000;
+	for (i = 0; i < BOOKE_IRQPRIO_MAX; i++)
+		vcpu->arch.ivor[i] = 0x7700 | i * 4;
+
+	kvmppc_init_timing_stats(vcpu);
+
+	r = kvmppc_core_vcpu_setup(vcpu);
+	if (r)
+		vcpu->kvm->arch.kvm_ops->vcpu_free(vcpu);
+	kvmppc_sanity_check(vcpu);
+	return r;
 }
 
 void kvmppc_core_vcpu_free(struct kvm_vcpu *vcpu)
diff --git a/arch/powerpc/kvm/e500.c b/arch/powerpc/kvm/e500.c
index 00649ca5fa9a..f2b4feaff6d2 100644
--- a/arch/powerpc/kvm/e500.c
+++ b/arch/powerpc/kvm/e500.c
@@ -433,31 +433,16 @@ static int kvmppc_set_one_reg_e500(struct kvm_vcpu *vcpu, u64 id,
 	return r;
 }
 
-static struct kvm_vcpu *kvmppc_core_vcpu_create_e500(struct kvm *kvm,
-						     unsigned int id)
+static int kvmppc_core_vcpu_create_e500(struct kvm_vcpu *vcpu)
 {
 	struct kvmppc_vcpu_e500 *vcpu_e500;
-	struct kvm_vcpu *vcpu;
 	int err;
 
-	BUILD_BUG_ON_MSG(offsetof(struct kvmppc_vcpu_e500, vcpu) != 0,
-		"struct kvm_vcpu must be at offset 0 for arch usercopy region");
+	BUILD_BUG_ON(offsetof(struct kvmppc_vcpu_e500, vcpu) != 0);
+	vcpu_e500 = to_e500(vcpu);
 
-	vcpu_e500 = kmem_cache_zalloc(kvm_vcpu_cache, GFP_KERNEL);
-	if (!vcpu_e500) {
-		err = -ENOMEM;
-		goto out;
-	}
-
-	vcpu = &vcpu_e500->vcpu;
-	err = kvm_vcpu_init(vcpu, kvm, id);
-	if (err)
-		goto free_vcpu;
-
-	if (kvmppc_e500_id_table_alloc(vcpu_e500) == NULL) {
-		err = -ENOMEM;
-		goto uninit_vcpu;
-	}
+	if (kvmppc_e500_id_table_alloc(vcpu_e500) == NULL)
+		return -ENOMEM;
 
 	err = kvmppc_e500_tlb_init(vcpu_e500);
 	if (err)
@@ -469,18 +454,13 @@ static struct kvm_vcpu *kvmppc_core_vcpu_create_e500(struct kvm *kvm,
 		goto uninit_tlb;
 	}
 
-	return vcpu;
+	return 0;
 
 uninit_tlb:
 	kvmppc_e500_tlb_uninit(vcpu_e500);
 uninit_id:
 	kvmppc_e500_id_table_free(vcpu_e500);
-uninit_vcpu:
-	kvm_vcpu_uninit(vcpu);
-free_vcpu:
-	kmem_cache_free(kvm_vcpu_cache, vcpu_e500);
-out:
-	return ERR_PTR(err);
+	return err;
 }
 
 static void kvmppc_core_vcpu_free_e500(struct kvm_vcpu *vcpu)
@@ -490,8 +470,6 @@ static void kvmppc_core_vcpu_free_e500(struct kvm_vcpu *vcpu)
 	free_page((unsigned long)vcpu->arch.shared);
 	kvmppc_e500_tlb_uninit(vcpu_e500);
 	kvmppc_e500_id_table_free(vcpu_e500);
-	kvm_vcpu_uninit(vcpu);
-	kmem_cache_free(kvm_vcpu_cache, vcpu_e500);
 }
 
 static int kvmppc_core_init_vm_e500(struct kvm *kvm)
diff --git a/arch/powerpc/kvm/e500mc.c b/arch/powerpc/kvm/e500mc.c
index 318e65c65999..e6b06cb2b92c 100644
--- a/arch/powerpc/kvm/e500mc.c
+++ b/arch/powerpc/kvm/e500mc.c
@@ -301,30 +301,20 @@ static int kvmppc_set_one_reg_e500mc(struct kvm_vcpu *vcpu, u64 id,
 	return r;
 }
 
-static struct kvm_vcpu *kvmppc_core_vcpu_create_e500mc(struct kvm *kvm,
-						       unsigned int id)
+static int kvmppc_core_vcpu_create_e500mc(struct kvm_vcpu *vcpu)
 {
 	struct kvmppc_vcpu_e500 *vcpu_e500;
-	struct kvm_vcpu *vcpu;
 	int err;
 
-	vcpu_e500 = kmem_cache_zalloc(kvm_vcpu_cache, GFP_KERNEL);
-	if (!vcpu_e500) {
-		err = -ENOMEM;
-		goto out;
-	}
-	vcpu = &vcpu_e500->vcpu;
+	BUILD_BUG_ON(offsetof(struct kvmppc_vcpu_e500, vcpu) != 0);
+	vcpu_e500 = to_e500(vcpu);
 
 	/* Invalid PIR value -- this LPID dosn't have valid state on any cpu */
 	vcpu->arch.oldpir = 0xffffffff;
 
-	err = kvm_vcpu_init(vcpu, kvm, id);
-	if (err)
-		goto free_vcpu;
-
 	err = kvmppc_e500_tlb_init(vcpu_e500);
 	if (err)
-		goto uninit_vcpu;
+		return err;
 
 	vcpu->arch.shared = (void *)__get_free_page(GFP_KERNEL | __GFP_ZERO);
 	if (!vcpu->arch.shared) {
@@ -332,17 +322,11 @@ static struct kvm_vcpu *kvmppc_core_vcpu_create_e500mc(struct kvm *kvm,
 		goto uninit_tlb;
 	}
 
-	return vcpu;
+	return 0;
 
 uninit_tlb:
 	kvmppc_e500_tlb_uninit(vcpu_e500);
-uninit_vcpu:
-	kvm_vcpu_uninit(vcpu);
-
-free_vcpu:
-	kmem_cache_free(kvm_vcpu_cache, vcpu_e500);
-out:
-	return ERR_PTR(err);
+	return err;
 }
 
 static void kvmppc_core_vcpu_free_e500mc(struct kvm_vcpu *vcpu)
@@ -351,8 +335,6 @@ static void kvmppc_core_vcpu_free_e500mc(struct kvm_vcpu *vcpu)
 
 	free_page((unsigned long)vcpu->arch.shared);
 	kvmppc_e500_tlb_uninit(vcpu_e500);
-	kvm_vcpu_uninit(vcpu);
-	kmem_cache_free(kvm_vcpu_cache, vcpu_e500);
 }
 
 static int kvmppc_core_init_vm_e500mc(struct kvm *kvm)
diff --git a/arch/powerpc/kvm/emulate_loadstore.c b/arch/powerpc/kvm/emulate_loadstore.c
index 2e496eb86e94..1139bc56e004 100644
--- a/arch/powerpc/kvm/emulate_loadstore.c
+++ b/arch/powerpc/kvm/emulate_loadstore.c
@@ -73,7 +73,6 @@ int kvmppc_emulate_loadstore(struct kvm_vcpu *vcpu)
 {
 	struct kvm_run *run = vcpu->run;
 	u32 inst;
-	int ra, rs, rt;
 	enum emulation_result emulated = EMULATE_FAIL;
 	int advance = 1;
 	struct instruction_op op;
@@ -85,10 +84,6 @@ int kvmppc_emulate_loadstore(struct kvm_vcpu *vcpu)
 	if (emulated != EMULATE_DONE)
 		return emulated;
 
-	ra = get_ra(inst);
-	rs = get_rs(inst);
-	rt = get_rt(inst);
-
 	vcpu->arch.mmio_vsx_copy_nums = 0;
 	vcpu->arch.mmio_vsx_offset = 0;
 	vcpu->arch.mmio_copy_type = KVMPPC_VSX_COPY_NONE;
diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c
index 416fb3d2a1d0..1af96fb5dc6f 100644
--- a/arch/powerpc/kvm/powerpc.c
+++ b/arch/powerpc/kvm/powerpc.c
@@ -475,7 +475,7 @@ void kvm_arch_destroy_vm(struct kvm *kvm)
 #endif
 
 	kvm_for_each_vcpu(i, vcpu, kvm)
-		kvm_arch_vcpu_free(vcpu);
+		kvm_vcpu_destroy(vcpu);
 
 	mutex_lock(&kvm->lock);
 	for (i = 0; i < atomic_read(&kvm->online_vcpus); i++)
@@ -720,22 +720,55 @@ void kvm_arch_flush_shadow_memslot(struct kvm *kvm,
 	kvmppc_core_flush_memslot(kvm, slot);
 }
 
-struct kvm_vcpu *kvm_arch_vcpu_create(struct kvm *kvm, unsigned int id)
+int kvm_arch_vcpu_precreate(struct kvm *kvm, unsigned int id)
+{
+	return 0;
+}
+
+static enum hrtimer_restart kvmppc_decrementer_wakeup(struct hrtimer *timer)
 {
 	struct kvm_vcpu *vcpu;
-	vcpu = kvmppc_core_vcpu_create(kvm, id);
-	if (!IS_ERR(vcpu)) {
-		vcpu->arch.wqp = &vcpu->wq;
-		kvmppc_create_vcpu_debugfs(vcpu, id);
-	}
-	return vcpu;
+
+	vcpu = container_of(timer, struct kvm_vcpu, arch.dec_timer);
+	kvmppc_decrementer_func(vcpu);
+
+	return HRTIMER_NORESTART;
+}
+
+int kvm_arch_vcpu_create(struct kvm_vcpu *vcpu)
+{
+	int err;
+
+	hrtimer_init(&vcpu->arch.dec_timer, CLOCK_REALTIME, HRTIMER_MODE_ABS);
+	vcpu->arch.dec_timer.function = kvmppc_decrementer_wakeup;
+	vcpu->arch.dec_expires = get_tb();
+
+#ifdef CONFIG_KVM_EXIT_TIMING
+	mutex_init(&vcpu->arch.exit_timing_lock);
+#endif
+	err = kvmppc_subarch_vcpu_init(vcpu);
+	if (err)
+		return err;
+
+	err = kvmppc_core_vcpu_create(vcpu);
+	if (err)
+		goto out_vcpu_uninit;
+
+	vcpu->arch.wqp = &vcpu->wq;
+	kvmppc_create_vcpu_debugfs(vcpu, vcpu->vcpu_id);
+	return 0;
+
+out_vcpu_uninit:
+	kvmppc_mmu_destroy(vcpu);
+	kvmppc_subarch_vcpu_uninit(vcpu);
+	return err;
 }
 
 void kvm_arch_vcpu_postcreate(struct kvm_vcpu *vcpu)
 {
 }
 
-void kvm_arch_vcpu_free(struct kvm_vcpu *vcpu)
+void kvm_arch_vcpu_destroy(struct kvm_vcpu *vcpu)
 {
 	/* Make sure we're not using the vcpu anymore */
 	hrtimer_cancel(&vcpu->arch.dec_timer);
@@ -758,11 +791,9 @@ void kvm_arch_vcpu_free(struct kvm_vcpu *vcpu)
 	}
 
 	kvmppc_core_vcpu_free(vcpu);
-}
 
-void kvm_arch_vcpu_destroy(struct kvm_vcpu *vcpu)
-{
-	kvm_arch_vcpu_free(vcpu);
+	kvmppc_mmu_destroy(vcpu);
+	kvmppc_subarch_vcpu_uninit(vcpu);
 }
 
 int kvm_cpu_has_pending_timer(struct kvm_vcpu *vcpu)
@@ -770,37 +801,6 @@ int kvm_cpu_has_pending_timer(struct kvm_vcpu *vcpu)
 	return kvmppc_core_pending_dec(vcpu);
 }
 
-static enum hrtimer_restart kvmppc_decrementer_wakeup(struct hrtimer *timer)
-{
-	struct kvm_vcpu *vcpu;
-
-	vcpu = container_of(timer, struct kvm_vcpu, arch.dec_timer);
-	kvmppc_decrementer_func(vcpu);
-
-	return HRTIMER_NORESTART;
-}
-
-int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu)
-{
-	int ret;
-
-	hrtimer_init(&vcpu->arch.dec_timer, CLOCK_REALTIME, HRTIMER_MODE_ABS);
-	vcpu->arch.dec_timer.function = kvmppc_decrementer_wakeup;
-	vcpu->arch.dec_expires = get_tb();
-
-#ifdef CONFIG_KVM_EXIT_TIMING
-	mutex_init(&vcpu->arch.exit_timing_lock);
-#endif
-	ret = kvmppc_subarch_vcpu_init(vcpu);
-	return ret;
-}
-
-void kvm_arch_vcpu_uninit(struct kvm_vcpu *vcpu)
-{
-	kvmppc_mmu_destroy(vcpu);
-	kvmppc_subarch_vcpu_uninit(vcpu);
-}
-
 void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 {
 #ifdef CONFIG_BOOKE
diff --git a/arch/powerpc/mm/book3s32/hash_low.S b/arch/powerpc/mm/book3s32/hash_low.S
index 8bbbd9775c8a..c11b0a005196 100644
--- a/arch/powerpc/mm/book3s32/hash_low.S
+++ b/arch/powerpc/mm/book3s32/hash_low.S
@@ -25,6 +25,12 @@
 #include <asm/feature-fixups.h>
 #include <asm/code-patching-asm.h>
 
+#ifdef CONFIG_VMAP_STACK
+#define ADDR_OFFSET	0
+#else
+#define ADDR_OFFSET	PAGE_OFFSET
+#endif
+
 #ifdef CONFIG_SMP
 	.section .bss
 	.align	2
@@ -47,8 +53,8 @@ mmu_hash_lock:
 	.text
 _GLOBAL(hash_page)
 #ifdef CONFIG_SMP
-	lis	r8, (mmu_hash_lock - PAGE_OFFSET)@h
-	ori	r8, r8, (mmu_hash_lock - PAGE_OFFSET)@l
+	lis	r8, (mmu_hash_lock - ADDR_OFFSET)@h
+	ori	r8, r8, (mmu_hash_lock - ADDR_OFFSET)@l
 	lis	r0,0x0fff
 	b	10f
 11:	lwz	r6,0(r8)
@@ -66,9 +72,12 @@ _GLOBAL(hash_page)
 	cmplw	0,r4,r0
 	ori	r3,r3,_PAGE_USER|_PAGE_PRESENT /* test low addresses as user */
 	mfspr	r5, SPRN_SPRG_PGDIR	/* phys page-table root */
+#ifdef CONFIG_VMAP_STACK
+	tovirt(r5, r5)
+#endif
 	blt+	112f			/* assume user more likely */
-	lis	r5, (swapper_pg_dir - PAGE_OFFSET)@ha	/* if kernel address, use */
-	addi	r5 ,r5 ,(swapper_pg_dir - PAGE_OFFSET)@l	/* kernel page table */
+	lis	r5, (swapper_pg_dir - ADDR_OFFSET)@ha	/* if kernel address, use */
+	addi	r5 ,r5 ,(swapper_pg_dir - ADDR_OFFSET)@l	/* kernel page table */
 	rlwimi	r3,r9,32-12,29,29	/* MSR_PR -> _PAGE_USER */
 112:
 #ifndef CONFIG_PTE_64BIT
@@ -80,6 +89,9 @@ _GLOBAL(hash_page)
 	lwzx	r8,r8,r5		/* Get L1 entry */
 	rlwinm.	r8,r8,0,0,20		/* extract pt base address */
 #endif
+#ifdef CONFIG_VMAP_STACK
+	tovirt(r8, r8)
+#endif
 #ifdef CONFIG_SMP
 	beq-	hash_page_out		/* return if no mapping */
 #else
@@ -137,9 +149,9 @@ retry:
 
 #ifdef CONFIG_SMP
 	eieio
-	lis	r8, (mmu_hash_lock - PAGE_OFFSET)@ha
+	lis	r8, (mmu_hash_lock - ADDR_OFFSET)@ha
 	li	r0,0
-	stw	r0, (mmu_hash_lock - PAGE_OFFSET)@l(r8)
+	stw	r0, (mmu_hash_lock - ADDR_OFFSET)@l(r8)
 #endif
 
 	/* Return from the exception */
@@ -152,9 +164,9 @@ retry:
 #ifdef CONFIG_SMP
 hash_page_out:
 	eieio
-	lis	r8, (mmu_hash_lock - PAGE_OFFSET)@ha
+	lis	r8, (mmu_hash_lock - ADDR_OFFSET)@ha
 	li	r0,0
-	stw	r0, (mmu_hash_lock - PAGE_OFFSET)@l(r8)
+	stw	r0, (mmu_hash_lock - ADDR_OFFSET)@l(r8)
 	blr
 #endif /* CONFIG_SMP */
 
@@ -329,7 +341,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_NEED_COHERENT)
 	patch_site	1f, patch__hash_page_A1
 	patch_site	2f, patch__hash_page_A2
 	/* Get the address of the primary PTE group in the hash table (r3) */
-0:	lis	r0, (Hash_base - PAGE_OFFSET)@h	/* base address of hash table */
+0:	lis	r0, (Hash_base - ADDR_OFFSET)@h	/* base address of hash table */
 1:	rlwimi	r0,r3,LG_PTEG_SIZE,HASH_LEFT,HASH_RIGHT    /* VSID -> hash */
 2:	rlwinm	r3,r4,20+LG_PTEG_SIZE,HASH_LEFT,HASH_RIGHT /* PI -> hash */
 	xor	r3,r3,r0		/* make primary hash */
@@ -343,10 +355,10 @@ END_FTR_SECTION_IFCLR(CPU_FTR_NEED_COHERENT)
 	beq+	10f			/* no PTE: go look for an empty slot */
 	tlbie	r4
 
-	lis	r4, (htab_hash_searches - PAGE_OFFSET)@ha
-	lwz	r6, (htab_hash_searches - PAGE_OFFSET)@l(r4)
+	lis	r4, (htab_hash_searches - ADDR_OFFSET)@ha
+	lwz	r6, (htab_hash_searches - ADDR_OFFSET)@l(r4)
 	addi	r6,r6,1			/* count how many searches we do */
-	stw	r6, (htab_hash_searches - PAGE_OFFSET)@l(r4)
+	stw	r6, (htab_hash_searches - ADDR_OFFSET)@l(r4)
 
 	/* Search the primary PTEG for a PTE whose 1st (d)word matches r5 */
 	mtctr	r0
@@ -378,10 +390,10 @@ END_FTR_SECTION_IFCLR(CPU_FTR_NEED_COHERENT)
 	beq+	found_empty
 
 	/* update counter of times that the primary PTEG is full */
-	lis	r4, (primary_pteg_full - PAGE_OFFSET)@ha
-	lwz	r6, (primary_pteg_full - PAGE_OFFSET)@l(r4)
+	lis	r4, (primary_pteg_full - ADDR_OFFSET)@ha
+	lwz	r6, (primary_pteg_full - ADDR_OFFSET)@l(r4)
 	addi	r6,r6,1
-	stw	r6, (primary_pteg_full - PAGE_OFFSET)@l(r4)
+	stw	r6, (primary_pteg_full - ADDR_OFFSET)@l(r4)
 
 	patch_site	0f, patch__hash_page_C
 	/* Search the secondary PTEG for an empty slot */
@@ -415,8 +427,8 @@ END_FTR_SECTION_IFCLR(CPU_FTR_NEED_COHERENT)
 	 * lockup here but that shouldn't happen
 	 */
 
-1:	lis	r4, (next_slot - PAGE_OFFSET)@ha	/* get next evict slot */
-	lwz	r6, (next_slot - PAGE_OFFSET)@l(r4)
+1:	lis	r4, (next_slot - ADDR_OFFSET)@ha	/* get next evict slot */
+	lwz	r6, (next_slot - ADDR_OFFSET)@l(r4)
 	addi	r6,r6,HPTE_SIZE			/* search for candidate */
 	andi.	r6,r6,7*HPTE_SIZE
 	stw	r6,next_slot@l(r4)
diff --git a/arch/powerpc/mm/book3s32/mmu.c b/arch/powerpc/mm/book3s32/mmu.c
index 69b2419accef..0a1c65a2c565 100644
--- a/arch/powerpc/mm/book3s32/mmu.c
+++ b/arch/powerpc/mm/book3s32/mmu.c
@@ -413,6 +413,7 @@ void __init MMU_init_hw(void)
 void __init MMU_init_hw_patch(void)
 {
 	unsigned int hmask = Hash_mask >> (16 - LG_HPTEG_SIZE);
+	unsigned int hash;
 
 	if (ppc_md.progress)
 		ppc_md.progress("hash:patch", 0x345);
@@ -424,8 +425,12 @@ void __init MMU_init_hw_patch(void)
 	/*
 	 * Patch up the instructions in hashtable.S:create_hpte
 	 */
-	modify_instruction_site(&patch__hash_page_A0, 0xffff,
-				((unsigned int)Hash - PAGE_OFFSET) >> 16);
+	if (IS_ENABLED(CONFIG_VMAP_STACK))
+		hash = (unsigned int)Hash;
+	else
+		hash = (unsigned int)Hash - PAGE_OFFSET;
+
+	modify_instruction_site(&patch__hash_page_A0, 0xffff, hash >> 16);
 	modify_instruction_site(&patch__hash_page_A1, 0x7c0, hash_mb << 6);
 	modify_instruction_site(&patch__hash_page_A2, 0x7c0, hash_mb2 << 6);
 	modify_instruction_site(&patch__hash_page_B, 0xffff, hmask);
diff --git a/arch/powerpc/mm/book3s64/hash_utils.c b/arch/powerpc/mm/book3s64/hash_utils.c
index b30435c7d804..523d4d39d11e 100644
--- a/arch/powerpc/mm/book3s64/hash_utils.c
+++ b/arch/powerpc/mm/book3s64/hash_utils.c
@@ -652,6 +652,7 @@ static void init_hpte_page_sizes(void)
 
 static void __init htab_init_page_sizes(void)
 {
+	bool aligned = true;
 	init_hpte_page_sizes();
 
 	if (!debug_pagealloc_enabled()) {
@@ -659,7 +660,15 @@ static void __init htab_init_page_sizes(void)
 		 * Pick a size for the linear mapping. Currently, we only
 		 * support 16M, 1M and 4K which is the default
 		 */
-		if (mmu_psize_defs[MMU_PAGE_16M].shift)
+		if (IS_ENABLED(STRICT_KERNEL_RWX) &&
+		    (unsigned long)_stext % 0x1000000) {
+			if (mmu_psize_defs[MMU_PAGE_16M].shift)
+				pr_warn("Kernel not 16M aligned, "
+					"disabling 16M linear map alignment");
+			aligned = false;
+		}
+
+		if (mmu_psize_defs[MMU_PAGE_16M].shift && aligned)
 			mmu_linear_psize = MMU_PAGE_16M;
 		else if (mmu_psize_defs[MMU_PAGE_1M].shift)
 			mmu_linear_psize = MMU_PAGE_1M;
diff --git a/arch/powerpc/mm/book3s64/iommu_api.c b/arch/powerpc/mm/book3s64/iommu_api.c
index 56cc84520577..eba73ebd8ae5 100644
--- a/arch/powerpc/mm/book3s64/iommu_api.c
+++ b/arch/powerpc/mm/book3s64/iommu_api.c
@@ -103,7 +103,7 @@ static long mm_iommu_do_alloc(struct mm_struct *mm, unsigned long ua,
 	for (entry = 0; entry < entries; entry += chunk) {
 		unsigned long n = min(entries - entry, chunk);
 
-		ret = get_user_pages(ua + (entry << PAGE_SHIFT), n,
+		ret = pin_user_pages(ua + (entry << PAGE_SHIFT), n,
 				FOLL_WRITE | FOLL_LONGTERM,
 				mem->hpages + entry, NULL);
 		if (ret == n) {
@@ -167,9 +167,8 @@ good_exit:
 	return 0;
 
 free_exit:
-	/* free the reference taken */
-	for (i = 0; i < pinned; i++)
-		put_page(mem->hpages[i]);
+	/* free the references taken */
+	unpin_user_pages(mem->hpages, pinned);
 
 	vfree(mem->hpas);
 	kfree(mem);
@@ -215,7 +214,8 @@ static void mm_iommu_unpin(struct mm_iommu_table_group_mem_t *mem)
 		if (mem->hpas[i] & MM_IOMMU_TABLE_GROUP_PAGE_DIRTY)
 			SetPageDirty(page);
 
-		put_page(page);
+		unpin_user_page(page);
+
 		mem->hpas[i] = 0;
 	}
 }
diff --git a/arch/powerpc/mm/book3s64/pgtable.c b/arch/powerpc/mm/book3s64/pgtable.c
index 75483b40fcb1..2bf7e1b4fd82 100644
--- a/arch/powerpc/mm/book3s64/pgtable.c
+++ b/arch/powerpc/mm/book3s64/pgtable.c
@@ -378,7 +378,6 @@ static inline void pgtable_free(void *table, int index)
 	}
 }
 
-#ifdef CONFIG_SMP
 void pgtable_free_tlb(struct mmu_gather *tlb, void *table, int index)
 {
 	unsigned long pgf = (unsigned long)table;
@@ -395,12 +394,6 @@ void __tlb_remove_table(void *_table)
 
 	return pgtable_free(table, index);
 }
-#else
-void pgtable_free_tlb(struct mmu_gather *tlb, void *table, int index)
-{
-	return pgtable_free(table, index);
-}
-#endif
 
 #ifdef CONFIG_PROC_FS
 atomic_long_t direct_pages_count[MMU_PAGE_COUNT];
diff --git a/arch/powerpc/mm/book3s64/radix_pgtable.c b/arch/powerpc/mm/book3s64/radix_pgtable.c
index 974109bb85db..dd1bea45325c 100644
--- a/arch/powerpc/mm/book3s64/radix_pgtable.c
+++ b/arch/powerpc/mm/book3s64/radix_pgtable.c
@@ -337,7 +337,11 @@ static void __init radix_init_pgtable(void)
 	}
 
 	/* Find out how many PID bits are supported */
-	if (cpu_has_feature(CPU_FTR_HVMODE)) {
+	if (!cpu_has_feature(CPU_FTR_P9_RADIX_PREFETCH_BUG)) {
+		if (!mmu_pid_bits)
+			mmu_pid_bits = 20;
+		mmu_base_pid = 1;
+	} else if (cpu_has_feature(CPU_FTR_HVMODE)) {
 		if (!mmu_pid_bits)
 			mmu_pid_bits = 20;
 #ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
diff --git a/arch/powerpc/mm/book3s64/radix_tlb.c b/arch/powerpc/mm/book3s64/radix_tlb.c
index a95175c0972b..03f43c924e00 100644
--- a/arch/powerpc/mm/book3s64/radix_tlb.c
+++ b/arch/powerpc/mm/book3s64/radix_tlb.c
@@ -1161,6 +1161,9 @@ extern void radix_kvm_prefetch_workaround(struct mm_struct *mm)
 	if (unlikely(pid == MMU_NO_CONTEXT))
 		return;
 
+	if (!cpu_has_feature(CPU_FTR_P9_RADIX_PREFETCH_BUG))
+		return;
+
 	/*
 	 * If this context hasn't run on that CPU before and KVM is
 	 * around, there's a slim chance that the guest on another
diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c
index b5047f9b5dec..8db0507619e2 100644
--- a/arch/powerpc/mm/fault.c
+++ b/arch/powerpc/mm/fault.c
@@ -233,7 +233,7 @@ static bool bad_kernel_fault(struct pt_regs *regs, unsigned long error_code,
 
 	// Read/write fault in a valid region (the exception table search passed
 	// above), but blocked by KUAP is bad, it can never succeed.
-	if (bad_kuap_fault(regs, is_write))
+	if (bad_kuap_fault(regs, address, is_write))
 		return true;
 
 	// What's left? Kernel fault on user in well defined regions (extable
@@ -279,12 +279,8 @@ static bool bad_stack_expansion(struct pt_regs *regs, unsigned long address,
 		if ((flags & FAULT_FLAG_WRITE) && (flags & FAULT_FLAG_USER) &&
 		    access_ok(nip, sizeof(*nip))) {
 			unsigned int inst;
-			int res;
 
-			pagefault_disable();
-			res = __get_user_inatomic(inst, nip);
-			pagefault_enable();
-			if (!res)
+			if (!probe_user_read(&inst, nip, sizeof(inst)))
 				return !store_updates_sp(inst);
 			*must_retry = true;
 		}
@@ -354,6 +350,9 @@ static void sanity_check_fault(bool is_write, bool is_user,
 	 * Userspace trying to access kernel address, we get PROTFAULT for that.
 	 */
 	if (is_user && address >= TASK_SIZE) {
+		if ((long)address == -1)
+			return;
+
 		pr_crit_ratelimited("%s[%d]: User access of kernel address (%lx) - exploit attempt? (uid: %d)\n",
 				   current->comm, current->pid, address,
 				   from_kuid(&init_user_ns, current_uid()));
diff --git a/arch/powerpc/mm/kasan/kasan_init_32.c b/arch/powerpc/mm/kasan/kasan_init_32.c
index 0e6ed4413eea..16dd95bd0749 100644
--- a/arch/powerpc/mm/kasan/kasan_init_32.c
+++ b/arch/powerpc/mm/kasan/kasan_init_32.c
@@ -12,7 +12,7 @@
 #include <asm/code-patching.h>
 #include <mm/mmu_decl.h>
 
-static pgprot_t kasan_prot_ro(void)
+static pgprot_t __init kasan_prot_ro(void)
 {
 	if (early_mmu_has_feature(MMU_FTR_HPTE_TABLE))
 		return PAGE_READONLY;
@@ -20,7 +20,7 @@ static pgprot_t kasan_prot_ro(void)
 	return PAGE_KERNEL_RO;
 }
 
-static void kasan_populate_pte(pte_t *ptep, pgprot_t prot)
+static void __init kasan_populate_pte(pte_t *ptep, pgprot_t prot)
 {
 	unsigned long va = (unsigned long)kasan_early_shadow_page;
 	phys_addr_t pa = __pa(kasan_early_shadow_page);
@@ -30,29 +30,25 @@ static void kasan_populate_pte(pte_t *ptep, pgprot_t prot)
 		__set_pte_at(&init_mm, va, ptep, pfn_pte(PHYS_PFN(pa), prot), 0);
 }
 
-static int __ref kasan_init_shadow_page_tables(unsigned long k_start, unsigned long k_end)
+static int __init kasan_init_shadow_page_tables(unsigned long k_start, unsigned long k_end)
 {
 	pmd_t *pmd;
 	unsigned long k_cur, k_next;
-	pgprot_t prot = slab_is_available() ? kasan_prot_ro() : PAGE_KERNEL;
+	pte_t *new = NULL;
 
 	pmd = pmd_offset(pud_offset(pgd_offset_k(k_start), k_start), k_start);
 
 	for (k_cur = k_start; k_cur != k_end; k_cur = k_next, pmd++) {
-		pte_t *new;
-
 		k_next = pgd_addr_end(k_cur, k_end);
 		if ((void *)pmd_page_vaddr(*pmd) != kasan_early_shadow_pte)
 			continue;
 
-		if (slab_is_available())
-			new = pte_alloc_one_kernel(&init_mm);
-		else
+		if (!new)
 			new = memblock_alloc(PTE_FRAG_SIZE, PTE_FRAG_SIZE);
 
 		if (!new)
 			return -ENOMEM;
-		kasan_populate_pte(new, prot);
+		kasan_populate_pte(new, PAGE_KERNEL);
 
 		smp_wmb(); /* See comment in __pte_alloc */
 
@@ -63,39 +59,27 @@ static int __ref kasan_init_shadow_page_tables(unsigned long k_start, unsigned l
 			new = NULL;
 		}
 		spin_unlock(&init_mm.page_table_lock);
-
-		if (new && slab_is_available())
-			pte_free_kernel(&init_mm, new);
 	}
 	return 0;
 }
 
-static void __ref *kasan_get_one_page(void)
-{
-	if (slab_is_available())
-		return (void *)__get_free_page(GFP_KERNEL | __GFP_ZERO);
-
-	return memblock_alloc(PAGE_SIZE, PAGE_SIZE);
-}
-
-static int __ref kasan_init_region(void *start, size_t size)
+static int __init kasan_init_region(void *start, size_t size)
 {
 	unsigned long k_start = (unsigned long)kasan_mem_to_shadow(start);
 	unsigned long k_end = (unsigned long)kasan_mem_to_shadow(start + size);
 	unsigned long k_cur;
 	int ret;
-	void *block = NULL;
+	void *block;
 
 	ret = kasan_init_shadow_page_tables(k_start, k_end);
 	if (ret)
 		return ret;
 
-	if (!slab_is_available())
-		block = memblock_alloc(k_end - k_start, PAGE_SIZE);
+	block = memblock_alloc(k_end - k_start, PAGE_SIZE);
 
 	for (k_cur = k_start & PAGE_MASK; k_cur < k_end; k_cur += PAGE_SIZE) {
 		pmd_t *pmd = pmd_offset(pud_offset(pgd_offset_k(k_cur), k_cur), k_cur);
-		void *va = block ? block + k_cur - k_start : kasan_get_one_page();
+		void *va = block + k_cur - k_start;
 		pte_t pte = pfn_pte(PHYS_PFN(__pa(va)), PAGE_KERNEL);
 
 		if (!va)
@@ -129,6 +113,31 @@ static void __init kasan_remap_early_shadow_ro(void)
 	flush_tlb_kernel_range(KASAN_SHADOW_START, KASAN_SHADOW_END);
 }
 
+static void __init kasan_unmap_early_shadow_vmalloc(void)
+{
+	unsigned long k_start = (unsigned long)kasan_mem_to_shadow((void *)VMALLOC_START);
+	unsigned long k_end = (unsigned long)kasan_mem_to_shadow((void *)VMALLOC_END);
+	unsigned long k_cur;
+	phys_addr_t pa = __pa(kasan_early_shadow_page);
+
+	if (!early_mmu_has_feature(MMU_FTR_HPTE_TABLE)) {
+		int ret = kasan_init_shadow_page_tables(k_start, k_end);
+
+		if (ret)
+			panic("kasan: kasan_init_shadow_page_tables() failed");
+	}
+	for (k_cur = k_start & PAGE_MASK; k_cur < k_end; k_cur += PAGE_SIZE) {
+		pmd_t *pmd = pmd_offset(pud_offset(pgd_offset_k(k_cur), k_cur), k_cur);
+		pte_t *ptep = pte_offset_kernel(pmd, k_cur);
+
+		if ((pte_val(*ptep) & PTE_RPN_MASK) != pa)
+			continue;
+
+		__set_pte_at(&init_mm, k_cur, ptep, __pte(0), 0);
+	}
+	flush_tlb_kernel_range(k_start, k_end);
+}
+
 void __init kasan_mmu_init(void)
 {
 	int ret;
@@ -165,34 +174,22 @@ void __init kasan_init(void)
 	pr_info("KASAN init done\n");
 }
 
-#ifdef CONFIG_MODULES
-void *module_alloc(unsigned long size)
+void __init kasan_late_init(void)
 {
-	void *base;
-
-	base = __vmalloc_node_range(size, MODULE_ALIGN, VMALLOC_START, VMALLOC_END,
-				    GFP_KERNEL, PAGE_KERNEL_EXEC, VM_FLUSH_RESET_PERMS,
-				    NUMA_NO_NODE, __builtin_return_address(0));
-
-	if (!base)
-		return NULL;
-
-	if (!kasan_init_region(base, size))
-		return base;
-
-	vfree(base);
-
-	return NULL;
+	if (IS_ENABLED(CONFIG_KASAN_VMALLOC))
+		kasan_unmap_early_shadow_vmalloc();
 }
-#endif
 
 #ifdef CONFIG_PPC_BOOK3S_32
 u8 __initdata early_hash[256 << 10] __aligned(256 << 10) = {0};
 
 static void __init kasan_early_hash_table(void)
 {
-	modify_instruction_site(&patch__hash_page_A0, 0xffff, __pa(early_hash) >> 16);
-	modify_instruction_site(&patch__flush_hash_A0, 0xffff, __pa(early_hash) >> 16);
+	unsigned int hash = IS_ENABLED(CONFIG_VMAP_STACK) ? (unsigned int)early_hash :
+							    __pa(early_hash);
+
+	modify_instruction_site(&patch__hash_page_A0, 0xffff, hash >> 16);
+	modify_instruction_site(&patch__flush_hash_A0, 0xffff, hash >> 16);
 
 	Hash = (struct hash_pte *)early_hash;
 }
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index f5535eae637f..ef7b1119b2e2 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -49,6 +49,7 @@
 #include <asm/fixmap.h>
 #include <asm/swiotlb.h>
 #include <asm/rtas.h>
+#include <asm/kasan.h>
 
 #include <mm/mmu_decl.h>
 
@@ -301,6 +302,9 @@ void __init mem_init(void)
 
 	high_memory = (void *) __va(max_low_pfn * PAGE_SIZE);
 	set_max_mapnr(max_pfn);
+
+	kasan_late_init();
+
 	memblock_free_all();
 
 #ifdef CONFIG_HIGHMEM
diff --git a/arch/powerpc/mm/mmu_decl.h b/arch/powerpc/mm/mmu_decl.h
index 8e99649c24fc..7097e07a209a 100644
--- a/arch/powerpc/mm/mmu_decl.h
+++ b/arch/powerpc/mm/mmu_decl.h
@@ -181,3 +181,9 @@ void mmu_mark_rodata_ro(void);
 static inline void mmu_mark_initmem_nx(void) { }
 static inline void mmu_mark_rodata_ro(void) { }
 #endif
+
+#ifdef CONFIG_PPC_DEBUG_WX
+void ptdump_check_wx(void);
+#else
+static inline void ptdump_check_wx(void) { }
+#endif
diff --git a/arch/powerpc/mm/nohash/8xx.c b/arch/powerpc/mm/nohash/8xx.c
index 96eb8e43f39b..3189308dece4 100644
--- a/arch/powerpc/mm/nohash/8xx.c
+++ b/arch/powerpc/mm/nohash/8xx.c
@@ -21,33 +21,34 @@ extern int __map_without_ltlbs;
 static unsigned long block_mapped_ram;
 
 /*
- * Return PA for this VA if it is in an area mapped with LTLBs.
+ * Return PA for this VA if it is in an area mapped with LTLBs or fixmap.
  * Otherwise, returns 0
  */
 phys_addr_t v_block_mapped(unsigned long va)
 {
 	unsigned long p = PHYS_IMMR_BASE;
 
-	if (__map_without_ltlbs)
-		return 0;
 	if (va >= VIRT_IMMR_BASE && va < VIRT_IMMR_BASE + IMMR_SIZE)
 		return p + va - VIRT_IMMR_BASE;
+	if (__map_without_ltlbs)
+		return 0;
 	if (va >= PAGE_OFFSET && va < PAGE_OFFSET + block_mapped_ram)
 		return __pa(va);
 	return 0;
 }
 
 /*
- * Return VA for a given PA mapped with LTLBs or 0 if not mapped
+ * Return VA for a given PA mapped with LTLBs or fixmap
+ * Return 0 if not mapped
  */
 unsigned long p_block_mapped(phys_addr_t pa)
 {
 	unsigned long p = PHYS_IMMR_BASE;
 
-	if (__map_without_ltlbs)
-		return 0;
 	if (pa >= p && pa < p + IMMR_SIZE)
 		return VIRT_IMMR_BASE + pa - p;
+	if (__map_without_ltlbs)
+		return 0;
 	if (pa < block_mapped_ram)
 		return (unsigned long)__va(pa);
 	return 0;
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index 50d68d21ddcc..3c7dec70cda0 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -1616,11 +1616,11 @@ static ssize_t topology_write(struct file *file, const char __user *buf,
 	return count;
 }
 
-static const struct file_operations topology_ops = {
-	.read = seq_read,
-	.write = topology_write,
-	.open = topology_open,
-	.release = single_release
+static const struct proc_ops topology_proc_ops = {
+	.proc_read	= seq_read,
+	.proc_write	= topology_write,
+	.proc_open	= topology_open,
+	.proc_release	= single_release,
 };
 
 static int topology_update_init(void)
@@ -1630,7 +1630,7 @@ static int topology_update_init(void)
 	if (vphn_enabled)
 		topology_schedule_update();
 
-	if (!proc_create("powerpc/topology_updates", 0644, NULL, &topology_ops))
+	if (!proc_create("powerpc/topology_updates", 0644, NULL, &topology_proc_ops))
 		return -ENOMEM;
 
 	topology_inited = 1;
diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c
index 73b84166d06a..5fb90edd865e 100644
--- a/arch/powerpc/mm/pgtable_32.c
+++ b/arch/powerpc/mm/pgtable_32.c
@@ -218,6 +218,7 @@ void mark_rodata_ro(void)
 
 	if (v_block_mapped((unsigned long)_sinittext)) {
 		mmu_mark_rodata_ro();
+		ptdump_check_wx();
 		return;
 	}
 
diff --git a/arch/powerpc/mm/ptdump/ptdump.c b/arch/powerpc/mm/ptdump/ptdump.c
index 2f9ddc29c535..206156255247 100644
--- a/arch/powerpc/mm/ptdump/ptdump.c
+++ b/arch/powerpc/mm/ptdump/ptdump.c
@@ -24,6 +24,8 @@
 #include <asm/page.h>
 #include <asm/pgalloc.h>
 
+#include <mm/mmu_decl.h>
+
 #include "ptdump.h"
 
 /*
@@ -173,10 +175,12 @@ static void dump_addr(struct pg_state *st, unsigned long addr)
 
 static void note_prot_wx(struct pg_state *st, unsigned long addr)
 {
+	pte_t pte = __pte(st->current_flags);
+
 	if (!IS_ENABLED(CONFIG_PPC_DEBUG_WX) || !st->check_wx)
 		return;
 
-	if (!((st->current_flags & pgprot_val(PAGE_KERNEL_X)) == pgprot_val(PAGE_KERNEL_X)))
+	if (!pte_write(pte) || !pte_exec(pte))
 		return;
 
 	WARN_ONCE(1, "powerpc/mm: Found insecure W+X mapping at address %p/%pS\n",
diff --git a/arch/powerpc/oprofile/backtrace.c b/arch/powerpc/oprofile/backtrace.c
index 43245f4a9bcb..6f347fa29f41 100644
--- a/arch/powerpc/oprofile/backtrace.c
+++ b/arch/powerpc/oprofile/backtrace.c
@@ -9,7 +9,7 @@
 #include <linux/sched.h>
 #include <asm/processor.h>
 #include <linux/uaccess.h>
-#include <asm/compat.h>
+#include <linux/compat.h>
 #include <asm/oprofile_impl.h>
 
 #define STACK_SP(STACK)		*(STACK)
@@ -28,15 +28,12 @@ static unsigned int user_getsp32(unsigned int sp, int is_first)
 	unsigned int stack_frame[2];
 	void __user *p = compat_ptr(sp);
 
-	if (!access_ok(p, sizeof(stack_frame)))
-		return 0;
-
 	/*
 	 * The most likely reason for this is that we returned -EFAULT,
 	 * which means that we've done all that we can do from
 	 * interrupt context.
 	 */
-	if (__copy_from_user_inatomic(stack_frame, p, sizeof(stack_frame)))
+	if (probe_user_read(stack_frame, (void __user *)p, sizeof(stack_frame)))
 		return 0;
 
 	if (!is_first)
@@ -54,11 +51,7 @@ static unsigned long user_getsp64(unsigned long sp, int is_first)
 {
 	unsigned long stack_frame[3];
 
-	if (!access_ok((void __user *)sp, sizeof(stack_frame)))
-		return 0;
-
-	if (__copy_from_user_inatomic(stack_frame, (void __user *)sp,
-					sizeof(stack_frame)))
+	if (probe_user_read(stack_frame, (void __user *)sp, sizeof(stack_frame)))
 		return 0;
 
 	if (!is_first)
@@ -103,7 +96,6 @@ void op_powerpc_backtrace(struct pt_regs * const regs, unsigned int depth)
 			first_frame = 0;
 		}
 	} else {
-		pagefault_disable();
 #ifdef CONFIG_PPC64
 		if (!is_32bit_task()) {
 			while (depth--) {
@@ -112,7 +104,6 @@ void op_powerpc_backtrace(struct pt_regs * const regs, unsigned int depth)
 					break;
 				first_frame = 0;
 			}
-			pagefault_enable();
 			return;
 		}
 #endif
@@ -123,6 +114,5 @@ void op_powerpc_backtrace(struct pt_regs * const regs, unsigned int depth)
 				break;
 			first_frame = 0;
 		}
-		pagefault_enable();
 	}
 }
diff --git a/arch/powerpc/perf/8xx-pmu.c b/arch/powerpc/perf/8xx-pmu.c
index 19124b0b171a..1ad03c55c88c 100644
--- a/arch/powerpc/perf/8xx-pmu.c
+++ b/arch/powerpc/perf/8xx-pmu.c
@@ -157,10 +157,6 @@ static void mpc8xx_pmu_read(struct perf_event *event)
 
 static void mpc8xx_pmu_del(struct perf_event *event, int flags)
 {
-	/* mfspr r10, SPRN_SPRG_SCRATCH0 */
-	unsigned int insn = PPC_INST_MFSPR | __PPC_RS(R10) |
-			    __PPC_SPR(SPRN_SPRG_SCRATCH0);
-
 	mpc8xx_pmu_read(event);
 
 	/* If it was the last user, stop counting to avoid useles overhead */
@@ -173,6 +169,10 @@ static void mpc8xx_pmu_del(struct perf_event *event, int flags)
 		break;
 	case PERF_8xx_ID_ITLB_LOAD_MISS:
 		if (atomic_dec_return(&itlb_miss_ref) == 0) {
+			/* mfspr r10, SPRN_SPRG_SCRATCH0 */
+			unsigned int insn = PPC_INST_MFSPR | __PPC_RS(R10) |
+					    __PPC_SPR(SPRN_SPRG_SCRATCH0);
+
 			patch_instruction_site(&patch__itlbmiss_exit_1, insn);
 #ifndef CONFIG_PIN_TLB_TEXT
 			patch_instruction_site(&patch__itlbmiss_exit_2, insn);
@@ -181,6 +181,10 @@ static void mpc8xx_pmu_del(struct perf_event *event, int flags)
 		break;
 	case PERF_8xx_ID_DTLB_LOAD_MISS:
 		if (atomic_dec_return(&dtlb_miss_ref) == 0) {
+			/* mfspr r10, SPRN_DAR */
+			unsigned int insn = PPC_INST_MFSPR | __PPC_RS(R10) |
+					    __PPC_SPR(SPRN_DAR);
+
 			patch_instruction_site(&patch__dtlbmiss_exit_1, insn);
 			patch_instruction_site(&patch__dtlbmiss_exit_2, insn);
 			patch_instruction_site(&patch__dtlbmiss_exit_3, insn);
diff --git a/arch/powerpc/perf/callchain.c b/arch/powerpc/perf/callchain.c
index 35d542515faf..cbc251981209 100644
--- a/arch/powerpc/perf/callchain.c
+++ b/arch/powerpc/perf/callchain.c
@@ -155,12 +155,8 @@ static int read_user_stack_64(unsigned long __user *ptr, unsigned long *ret)
 	    ((unsigned long)ptr & 7))
 		return -EFAULT;
 
-	pagefault_disable();
-	if (!__get_user_inatomic(*ret, ptr)) {
-		pagefault_enable();
+	if (!probe_user_read(ret, ptr, sizeof(*ret)))
 		return 0;
-	}
-	pagefault_enable();
 
 	return read_user_stack_slow(ptr, ret, 8);
 }
@@ -171,12 +167,8 @@ static int read_user_stack_32(unsigned int __user *ptr, unsigned int *ret)
 	    ((unsigned long)ptr & 3))
 		return -EFAULT;
 
-	pagefault_disable();
-	if (!__get_user_inatomic(*ret, ptr)) {
-		pagefault_enable();
+	if (!probe_user_read(ret, ptr, sizeof(*ret)))
 		return 0;
-	}
-	pagefault_enable();
 
 	return read_user_stack_slow(ptr, ret, 4);
 }
@@ -293,17 +285,11 @@ static void perf_callchain_user_64(struct perf_callchain_entry_ctx *entry,
  */
 static int read_user_stack_32(unsigned int __user *ptr, unsigned int *ret)
 {
-	int rc;
-
 	if ((unsigned long)ptr > TASK_SIZE - sizeof(unsigned int) ||
 	    ((unsigned long)ptr & 3))
 		return -EFAULT;
 
-	pagefault_disable();
-	rc = __get_user_inatomic(*ret, ptr);
-	pagefault_enable();
-
-	return rc;
+	return probe_user_read(ret, ptr, sizeof(*ret));
 }
 
 static inline void perf_callchain_user_64(struct perf_callchain_entry_ctx *entry,
diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c
index 48604625ab31..3086055bf681 100644
--- a/arch/powerpc/perf/core-book3s.c
+++ b/arch/powerpc/perf/core-book3s.c
@@ -415,7 +415,6 @@ static void power_pmu_sched_task(struct perf_event_context *ctx, bool sched_in)
 static __u64 power_pmu_bhrb_to(u64 addr)
 {
 	unsigned int instr;
-	int ret;
 	__u64 target;
 
 	if (is_kernel_addr(addr)) {
@@ -426,13 +425,8 @@ static __u64 power_pmu_bhrb_to(u64 addr)
 	}
 
 	/* Userspace: need copy instruction here then translate it */
-	pagefault_disable();
-	ret = __get_user_inatomic(instr, (unsigned int __user *)addr);
-	if (ret) {
-		pagefault_enable();
+	if (probe_user_read(&instr, (unsigned int __user *)addr, sizeof(instr)))
 		return 0;
-	}
-	pagefault_enable();
 
 	target = branch_target(&instr);
 	if ((!target) || (instr & BRANCH_ABSOLUTE))
diff --git a/arch/powerpc/platforms/512x/mpc512x_lpbfifo.c b/arch/powerpc/platforms/512x/mpc512x_lpbfifo.c
index 13631f35cd14..04bf6ecf7d55 100644
--- a/arch/powerpc/platforms/512x/mpc512x_lpbfifo.c
+++ b/arch/powerpc/platforms/512x/mpc512x_lpbfifo.c
@@ -434,9 +434,9 @@ static int mpc512x_lpbfifo_probe(struct platform_device *pdev)
 	memset(&lpbfifo, 0, sizeof(struct lpbfifo_data));
 	spin_lock_init(&lpbfifo.lock);
 
-	lpbfifo.chan = dma_request_slave_channel(&pdev->dev, "rx-tx");
-	if (lpbfifo.chan == NULL)
-		return -EPROBE_DEFER;
+	lpbfifo.chan = dma_request_chan(&pdev->dev, "rx-tx");
+	if (IS_ERR(lpbfifo.chan))
+		return PTR_ERR(lpbfifo.chan);
 
 	if (of_address_to_resource(pdev->dev.of_node, 0, &r) != 0) {
 		dev_err(&pdev->dev, "bad 'reg' in 'sclpc' device tree node\n");
diff --git a/arch/powerpc/platforms/83xx/km83xx.c b/arch/powerpc/platforms/83xx/km83xx.c
index 273145aed90a..ada42f03915a 100644
--- a/arch/powerpc/platforms/83xx/km83xx.c
+++ b/arch/powerpc/platforms/83xx/km83xx.c
@@ -34,7 +34,6 @@
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
 #include <soc/fsl/qe/qe.h>
-#include <soc/fsl/qe/qe_ic.h>
 
 #include "mpc83xx.h"
 
@@ -64,7 +63,7 @@ static void quirk_mpc8360e_qe_enet10(void)
 		return;
 	}
 
-	base = ioremap(res.start, res.end - res.start + 1);
+	base = ioremap(res.start, resource_size(&res));
 
 	/*
 	 * set output delay adjustments to default values according
@@ -178,7 +177,7 @@ define_machine(mpc83xx_km) {
 	.name		= "mpc83xx-km-platform",
 	.probe		= mpc83xx_km_probe,
 	.setup_arch	= mpc83xx_km_setup_arch,
-	.init_IRQ	= mpc83xx_ipic_and_qe_init_IRQ,
+	.init_IRQ	= mpc83xx_ipic_init_IRQ,
 	.get_irq	= ipic_get_irq,
 	.restart	= mpc83xx_restart,
 	.time_init	= mpc83xx_time_init,
diff --git a/arch/powerpc/platforms/83xx/misc.c b/arch/powerpc/platforms/83xx/misc.c
index 6399865a625e..a952e91db3ee 100644
--- a/arch/powerpc/platforms/83xx/misc.c
+++ b/arch/powerpc/platforms/83xx/misc.c
@@ -14,7 +14,6 @@
 #include <asm/io.h>
 #include <asm/hw_irq.h>
 #include <asm/ipic.h>
-#include <soc/fsl/qe/qe_ic.h>
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
 
@@ -91,28 +90,6 @@ void __init mpc83xx_ipic_init_IRQ(void)
 	ipic_set_default_priority();
 }
 
-#ifdef CONFIG_QUICC_ENGINE
-void __init mpc83xx_qe_init_IRQ(void)
-{
-	struct device_node *np;
-
-	np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
-	if (!np) {
-		np = of_find_node_by_type(NULL, "qeic");
-		if (!np)
-			return;
-	}
-	qe_ic_init(np, 0, qe_ic_cascade_low_ipic, qe_ic_cascade_high_ipic);
-	of_node_put(np);
-}
-
-void __init mpc83xx_ipic_and_qe_init_IRQ(void)
-{
-	mpc83xx_ipic_init_IRQ();
-	mpc83xx_qe_init_IRQ();
-}
-#endif /* CONFIG_QUICC_ENGINE */
-
 static const struct of_device_id of_bus_ids[] __initconst = {
 	{ .type = "soc", },
 	{ .compatible = "soc", },
diff --git a/arch/powerpc/platforms/83xx/mpc832x_mds.c b/arch/powerpc/platforms/83xx/mpc832x_mds.c
index b428835e5919..6fa5402ebf20 100644
--- a/arch/powerpc/platforms/83xx/mpc832x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc832x_mds.c
@@ -33,7 +33,6 @@
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
 #include <soc/fsl/qe/qe.h>
-#include <soc/fsl/qe/qe_ic.h>
 
 #include "mpc83xx.h"
 
@@ -102,7 +101,7 @@ define_machine(mpc832x_mds) {
 	.name 		= "MPC832x MDS",
 	.probe 		= mpc832x_sys_probe,
 	.setup_arch 	= mpc832x_sys_setup_arch,
-	.init_IRQ	= mpc83xx_ipic_and_qe_init_IRQ,
+	.init_IRQ	= mpc83xx_ipic_init_IRQ,
 	.get_irq 	= ipic_get_irq,
 	.restart 	= mpc83xx_restart,
 	.time_init 	= mpc83xx_time_init,
diff --git a/arch/powerpc/platforms/83xx/mpc832x_rdb.c b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
index 4588ce632484..622c625d5ce4 100644
--- a/arch/powerpc/platforms/83xx/mpc832x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
@@ -22,7 +22,6 @@
 #include <asm/ipic.h>
 #include <asm/udbg.h>
 #include <soc/fsl/qe/qe.h>
-#include <soc/fsl/qe/qe_ic.h>
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
 
@@ -220,7 +219,7 @@ define_machine(mpc832x_rdb) {
 	.name		= "MPC832x RDB",
 	.probe		= mpc832x_rdb_probe,
 	.setup_arch	= mpc832x_rdb_setup_arch,
-	.init_IRQ	= mpc83xx_ipic_and_qe_init_IRQ,
+	.init_IRQ	= mpc83xx_ipic_init_IRQ,
 	.get_irq	= ipic_get_irq,
 	.restart	= mpc83xx_restart,
 	.time_init	= mpc83xx_time_init,
diff --git a/arch/powerpc/platforms/83xx/mpc836x_mds.c b/arch/powerpc/platforms/83xx/mpc836x_mds.c
index 240a26d88b07..90d9cbfae659 100644
--- a/arch/powerpc/platforms/83xx/mpc836x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc836x_mds.c
@@ -40,7 +40,6 @@
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
 #include <soc/fsl/qe/qe.h>
-#include <soc/fsl/qe/qe_ic.h>
 
 #include "mpc83xx.h"
 
@@ -202,7 +201,7 @@ define_machine(mpc836x_mds) {
 	.name		= "MPC836x MDS",
 	.probe		= mpc836x_mds_probe,
 	.setup_arch	= mpc836x_mds_setup_arch,
-	.init_IRQ	= mpc83xx_ipic_and_qe_init_IRQ,
+	.init_IRQ	= mpc83xx_ipic_init_IRQ,
 	.get_irq	= ipic_get_irq,
 	.restart	= mpc83xx_restart,
 	.time_init	= mpc83xx_time_init,
diff --git a/arch/powerpc/platforms/83xx/mpc836x_rdk.c b/arch/powerpc/platforms/83xx/mpc836x_rdk.c
index 9923059cb111..b4aac2cde849 100644
--- a/arch/powerpc/platforms/83xx/mpc836x_rdk.c
+++ b/arch/powerpc/platforms/83xx/mpc836x_rdk.c
@@ -17,7 +17,6 @@
 #include <asm/ipic.h>
 #include <asm/udbg.h>
 #include <soc/fsl/qe/qe.h>
-#include <soc/fsl/qe/qe_ic.h>
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
 
@@ -42,7 +41,7 @@ define_machine(mpc836x_rdk) {
 	.name		= "MPC836x RDK",
 	.probe		= mpc836x_rdk_probe,
 	.setup_arch	= mpc836x_rdk_setup_arch,
-	.init_IRQ	= mpc83xx_ipic_and_qe_init_IRQ,
+	.init_IRQ	= mpc83xx_ipic_init_IRQ,
 	.get_irq	= ipic_get_irq,
 	.restart	= mpc83xx_restart,
 	.time_init	= mpc83xx_time_init,
diff --git a/arch/powerpc/platforms/83xx/mpc83xx.h b/arch/powerpc/platforms/83xx/mpc83xx.h
index 459145623334..f37d04332fc7 100644
--- a/arch/powerpc/platforms/83xx/mpc83xx.h
+++ b/arch/powerpc/platforms/83xx/mpc83xx.h
@@ -72,13 +72,6 @@ extern int mpc837x_usb_cfg(void);
 extern int mpc834x_usb_cfg(void);
 extern int mpc831x_usb_cfg(void);
 extern void mpc83xx_ipic_init_IRQ(void);
-#ifdef CONFIG_QUICC_ENGINE
-extern void mpc83xx_qe_init_IRQ(void);
-extern void mpc83xx_ipic_and_qe_init_IRQ(void);
-#else
-static inline void __init mpc83xx_qe_init_IRQ(void) {}
-#define mpc83xx_ipic_and_qe_init_IRQ mpc83xx_ipic_init_IRQ
-#endif /* CONFIG_QUICC_ENGINE */
 
 #ifdef CONFIG_PCI
 extern void mpc83xx_setup_pci(void);
diff --git a/arch/powerpc/platforms/85xx/corenet_generic.c b/arch/powerpc/platforms/85xx/corenet_generic.c
index a328a741b457..27ac38f7e1a9 100644
--- a/arch/powerpc/platforms/85xx/corenet_generic.c
+++ b/arch/powerpc/platforms/85xx/corenet_generic.c
@@ -24,7 +24,6 @@
 #include <asm/mpic.h>
 #include <asm/ehv_pic.h>
 #include <asm/swiotlb.h>
-#include <soc/fsl/qe/qe_ic.h>
 
 #include <linux/of_platform.h>
 #include <sysdev/fsl_soc.h>
@@ -38,8 +37,6 @@ void __init corenet_gen_pic_init(void)
 	unsigned int flags = MPIC_BIG_ENDIAN | MPIC_SINGLE_DEST_CPU |
 		MPIC_NO_RESET;
 
-	struct device_node *np;
-
 	if (ppc_md.get_irq == mpic_get_coreint_irq)
 		flags |= MPIC_ENABLE_COREINT;
 
@@ -47,13 +44,6 @@ void __init corenet_gen_pic_init(void)
 	BUG_ON(mpic == NULL);
 
 	mpic_init(mpic);
-
-	np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
-	if (np) {
-		qe_ic_init(np, 0, qe_ic_cascade_low_mpic,
-				qe_ic_cascade_high_mpic);
-		of_node_put(np);
-	}
 }
 
 /*
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index 381a6ac8cb4b..7759eca7d535 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -44,7 +44,6 @@
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
 #include <soc/fsl/qe/qe.h>
-#include <soc/fsl/qe/qe_ic.h>
 #include <asm/mpic.h>
 #include <asm/swiotlb.h>
 #include "smp.h"
@@ -268,33 +267,8 @@ static void __init mpc85xx_mds_qe_init(void)
 	}
 }
 
-static void __init mpc85xx_mds_qeic_init(void)
-{
-	struct device_node *np;
-
-	np = of_find_compatible_node(NULL, NULL, "fsl,qe");
-	if (!of_device_is_available(np)) {
-		of_node_put(np);
-		return;
-	}
-
-	np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
-	if (!np) {
-		np = of_find_node_by_type(NULL, "qeic");
-		if (!np)
-			return;
-	}
-
-	if (machine_is(p1021_mds))
-		qe_ic_init(np, 0, qe_ic_cascade_low_mpic,
-				qe_ic_cascade_high_mpic);
-	else
-		qe_ic_init(np, 0, qe_ic_cascade_muxed_mpic, NULL);
-	of_node_put(np);
-}
 #else
 static void __init mpc85xx_mds_qe_init(void) { }
-static void __init mpc85xx_mds_qeic_init(void) { }
 #endif	/* CONFIG_QUICC_ENGINE */
 
 static void __init mpc85xx_mds_setup_arch(void)
@@ -364,7 +338,6 @@ static void __init mpc85xx_mds_pic_init(void)
 	BUG_ON(mpic == NULL);
 
 	mpic_init(mpic);
-	mpc85xx_mds_qeic_init();
 }
 
 static int __init mpc85xx_mds_probe(void)
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
index 7f9a84f85766..80a80174768c 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
@@ -23,7 +23,6 @@
 #include <asm/udbg.h>
 #include <asm/mpic.h>
 #include <soc/fsl/qe/qe.h>
-#include <soc/fsl/qe/qe_ic.h>
 
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
@@ -44,10 +43,6 @@ void __init mpc85xx_rdb_pic_init(void)
 {
 	struct mpic *mpic;
 
-#ifdef CONFIG_QUICC_ENGINE
-	struct device_node *np;
-#endif
-
 	if (of_machine_is_compatible("fsl,MPC85XXRDB-CAMP")) {
 		mpic = mpic_alloc(NULL, 0, MPIC_NO_RESET |
 			MPIC_BIG_ENDIAN |
@@ -62,18 +57,6 @@ void __init mpc85xx_rdb_pic_init(void)
 
 	BUG_ON(mpic == NULL);
 	mpic_init(mpic);
-
-#ifdef CONFIG_QUICC_ENGINE
-	np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
-	if (np) {
-		qe_ic_init(np, 0, qe_ic_cascade_low_mpic,
-				qe_ic_cascade_high_mpic);
-		of_node_put(np);
-
-	} else
-		pr_err("%s: Could not find qe-ic node\n", __func__);
-#endif
-
 }
 
 /*
diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c
index 8c7ea2486bc0..48f7d96ae37d 100644
--- a/arch/powerpc/platforms/85xx/smp.c
+++ b/arch/powerpc/platforms/85xx/smp.c
@@ -252,6 +252,15 @@ static int smp_85xx_start_cpu(int cpu)
 	out_be64((u64 *)(&spin_table->addr_h),
 		__pa(ppc_function_entry(generic_secondary_smp_init)));
 #else
+#ifdef CONFIG_PHYS_ADDR_T_64BIT
+	/*
+	 * We need also to write addr_h to spin table for systems
+	 * in which their physical memory start address was configured
+	 * to above 4G, otherwise the secondary core can not get
+	 * correct entry to start from.
+	 */
+	out_be32(&spin_table->addr_h, __pa(__early_start) >> 32);
+#endif
 	out_be32(&spin_table->addr_l, __pa(__early_start));
 #endif
 	flush_spin_table(spin_table);
diff --git a/arch/powerpc/platforms/85xx/twr_p102x.c b/arch/powerpc/platforms/85xx/twr_p102x.c
index 6c3c0cdaee9a..eaec099b4077 100644
--- a/arch/powerpc/platforms/85xx/twr_p102x.c
+++ b/arch/powerpc/platforms/85xx/twr_p102x.c
@@ -19,7 +19,6 @@
 #include <asm/udbg.h>
 #include <asm/mpic.h>
 #include <soc/fsl/qe/qe.h>
-#include <soc/fsl/qe/qe_ic.h>
 
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
@@ -31,26 +30,12 @@ static void __init twr_p1025_pic_init(void)
 {
 	struct mpic *mpic;
 
-#ifdef CONFIG_QUICC_ENGINE
-	struct device_node *np;
-#endif
-
 	mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN |
 			MPIC_SINGLE_DEST_CPU,
 			0, 256, " OpenPIC  ");
 
 	BUG_ON(mpic == NULL);
 	mpic_init(mpic);
-
-#ifdef CONFIG_QUICC_ENGINE
-	np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
-	if (np) {
-		qe_ic_init(np, 0, qe_ic_cascade_low_mpic,
-				qe_ic_cascade_high_mpic);
-		of_node_put(np);
-	} else
-		pr_err("Could not find qe-ic node\n");
-#endif
 }
 
 /* ************************************************************************
@@ -60,10 +45,6 @@ static void __init twr_p1025_pic_init(void)
  */
 static void __init twr_p1025_setup_arch(void)
 {
-#ifdef CONFIG_QUICC_ENGINE
-	struct device_node *np;
-#endif
-
 	if (ppc_md.progress)
 		ppc_md.progress("twr_p1025_setup_arch()", 0);
 
@@ -77,6 +58,7 @@ static void __init twr_p1025_setup_arch(void)
 #if IS_ENABLED(CONFIG_UCC_GETH) || IS_ENABLED(CONFIG_SERIAL_QE)
 	if (machine_is(twr_p1025)) {
 		struct ccsr_guts __iomem *guts;
+		struct device_node *np;
 
 		np = of_find_compatible_node(NULL, NULL, "fsl,p1021-guts");
 		if (np) {
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index e28df298df56..1f8025383caa 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -177,6 +177,10 @@ config PPC_970_NAP
 config PPC_P7_NAP
 	bool
 
+config PPC_BOOK3S_IDLE
+	def_bool y
+	depends on (PPC_970_NAP || PPC_P7_NAP)
+
 config PPC_INDIRECT_PIO
 	bool
 	select GENERIC_IOMAP
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index 8d7f9c3dc771..6caedc88474f 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -1,4 +1,9 @@
 # SPDX-License-Identifier: GPL-2.0
+config PPC32
+	bool
+	default y if !PPC64
+	select KASAN_VMALLOC if KASAN && MODULES
+
 config PPC64
 	bool "64-bit kernel"
 	select ZLIB_DEFLATE
@@ -31,12 +36,14 @@ config PPC_BOOK3S_6xx
 	select PPC_HAVE_PMU_SUPPORT
 	select PPC_HAVE_KUEP
 	select PPC_HAVE_KUAP
+	select HAVE_ARCH_VMAP_STACK
 
 config PPC_BOOK3S_601
 	bool "PowerPC 601"
 	select PPC_BOOK3S_32
 	select PPC_FPU
 	select PPC_HAVE_KUAP
+	select HAVE_ARCH_VMAP_STACK
 
 config PPC_85xx
 	bool "Freescale 85xx"
@@ -49,6 +56,7 @@ config PPC_8xx
 	select PPC_HAVE_KUEP
 	select PPC_HAVE_KUAP
 	select PPC_MM_SLICES if HUGETLB_PAGE
+	select HAVE_ARCH_VMAP_STACK
 
 config 40x
 	bool "AMCC 40x"
diff --git a/arch/powerpc/platforms/cell/setup.c b/arch/powerpc/platforms/cell/setup.c
index 9680d766f20e..855eedb8d7d7 100644
--- a/arch/powerpc/platforms/cell/setup.c
+++ b/arch/powerpc/platforms/cell/setup.c
@@ -240,9 +240,6 @@ static void __init cell_setup_arch(void)
 	init_pci_config_tokens();
 
 	cbe_pervasive_init();
-#ifdef CONFIG_DUMMY_CONSOLE
-	conswitchp = &dummy_con;
-#endif
 
 	mmio_nvram_init();
 }
diff --git a/arch/powerpc/platforms/cell/spufs/inode.c b/arch/powerpc/platforms/cell/spufs/inode.c
index 9b1586b85152..25390569e24c 100644
--- a/arch/powerpc/platforms/cell/spufs/inode.c
+++ b/arch/powerpc/platforms/cell/spufs/inode.c
@@ -583,7 +583,7 @@ enum {
 	Opt_uid, Opt_gid, Opt_mode, Opt_debug,
 };
 
-static const struct fs_parameter_spec spufs_param_specs[] = {
+static const struct fs_parameter_spec spufs_fs_parameters[] = {
 	fsparam_u32	("gid",				Opt_gid),
 	fsparam_u32oct	("mode",			Opt_mode),
 	fsparam_u32	("uid",				Opt_uid),
@@ -591,11 +591,6 @@ static const struct fs_parameter_spec spufs_param_specs[] = {
 	{}
 };
 
-static const struct fs_parameter_description spufs_fs_parameters = {
-	.name		= "spufs",
-	.specs		= spufs_param_specs,
-};
-
 static int spufs_show_options(struct seq_file *m, struct dentry *root)
 {
 	struct spufs_sb_info *sbi = spufs_get_sb_info(root->d_sb);
@@ -623,7 +618,7 @@ static int spufs_parse_param(struct fs_context *fc, struct fs_parameter *param)
 	kgid_t gid;
 	int opt;
 
-	opt = fs_parse(fc, &spufs_fs_parameters, param, &result);
+	opt = fs_parse(fc, spufs_fs_parameters, param, &result);
 	if (opt < 0)
 		return opt;
 
@@ -774,7 +769,7 @@ static struct file_system_type spufs_type = {
 	.owner = THIS_MODULE,
 	.name = "spufs",
 	.init_fs_context = spufs_init_fs_context,
-	.parameters	= &spufs_fs_parameters,
+	.parameters	= spufs_fs_parameters,
 	.kill_sb = kill_litter_super,
 };
 MODULE_ALIAS_FS("spufs");
diff --git a/arch/powerpc/platforms/maple/setup.c b/arch/powerpc/platforms/maple/setup.c
index 9cd6f3e1000b..6f019df37916 100644
--- a/arch/powerpc/platforms/maple/setup.c
+++ b/arch/powerpc/platforms/maple/setup.c
@@ -183,9 +183,6 @@ static void __init maple_setup_arch(void)
 	/* Lookup PCI hosts */
        	maple_pci_init();
 
-#ifdef CONFIG_DUMMY_CONSOLE
-	conswitchp = &dummy_con;
-#endif
 	maple_use_rtas_reboot_and_halt_if_present();
 
 	printk(KERN_DEBUG "Using native/NAP idle loop\n");
@@ -232,7 +229,7 @@ static void __init maple_init_IRQ(void)
 	root = of_find_node_by_path("/");
 	naddr = of_n_addr_cells(root);
 	opprop = of_get_property(root, "platform-open-pic", &opplen);
-	if (opprop != 0) {
+	if (opprop) {
 		openpic_addr = of_read_number(opprop, naddr);
 		has_isus = (opplen > naddr);
 		printk(KERN_DEBUG "OpenPIC addr: %lx, has ISUs: %d\n",
diff --git a/arch/powerpc/platforms/pasemi/setup.c b/arch/powerpc/platforms/pasemi/setup.c
index 05a52f10c2f0..b612474f8f8e 100644
--- a/arch/powerpc/platforms/pasemi/setup.c
+++ b/arch/powerpc/platforms/pasemi/setup.c
@@ -147,10 +147,6 @@ static void __init pas_setup_arch(void)
 	/* Lookup PCI hosts */
 	pas_pci_init();
 
-#ifdef CONFIG_DUMMY_CONSOLE
-	conswitchp = &dummy_con;
-#endif
-
 	/* Remap SDC register for doing reset */
 	/* XXXOJN This should maybe come out of the device tree */
 	reset_reg = ioremap(0xfc101100, 4);
diff --git a/arch/powerpc/platforms/powernv/opal.c b/arch/powerpc/platforms/powernv/opal.c
index a6ee08009f0f..2b3dfd0b6cdd 100644
--- a/arch/powerpc/platforms/powernv/opal.c
+++ b/arch/powerpc/platforms/powernv/opal.c
@@ -790,48 +790,81 @@ static int opal_sysfs_init(void)
 	return 0;
 }
 
-static ssize_t symbol_map_read(struct file *fp, struct kobject *kobj,
-			       struct bin_attribute *bin_attr,
-			       char *buf, loff_t off, size_t count)
+static ssize_t export_attr_read(struct file *fp, struct kobject *kobj,
+				struct bin_attribute *bin_attr, char *buf,
+				loff_t off, size_t count)
 {
 	return memory_read_from_buffer(buf, count, &off, bin_attr->private,
 				       bin_attr->size);
 }
 
-static struct bin_attribute symbol_map_attr = {
-	.attr = {.name = "symbol_map", .mode = 0400},
-	.read = symbol_map_read
-};
-
-static void opal_export_symmap(void)
+static int opal_add_one_export(struct kobject *parent, const char *export_name,
+			       struct device_node *np, const char *prop_name)
 {
-	const __be64 *syms;
-	unsigned int size;
-	struct device_node *fw;
+	struct bin_attribute *attr = NULL;
+	const char *name = NULL;
+	u64 vals[2];
 	int rc;
 
-	fw = of_find_node_by_path("/ibm,opal/firmware");
-	if (!fw)
-		return;
-	syms = of_get_property(fw, "symbol-map", &size);
-	if (!syms || size != 2 * sizeof(__be64))
-		return;
+	rc = of_property_read_u64_array(np, prop_name, &vals[0], 2);
+	if (rc)
+		goto out;
 
-	/* Setup attributes */
-	symbol_map_attr.private = __va(be64_to_cpu(syms[0]));
-	symbol_map_attr.size = be64_to_cpu(syms[1]);
+	attr = kzalloc(sizeof(*attr), GFP_KERNEL);
+	name = kstrdup(export_name, GFP_KERNEL);
+	if (!name) {
+		rc = -ENOMEM;
+		goto out;
+	}
 
-	rc = sysfs_create_bin_file(opal_kobj, &symbol_map_attr);
-	if (rc)
-		pr_warn("Error %d creating OPAL symbols file\n", rc);
+	sysfs_bin_attr_init(attr);
+	attr->attr.name = name;
+	attr->attr.mode = 0400;
+	attr->read = export_attr_read;
+	attr->private = __va(vals[0]);
+	attr->size = vals[1];
+
+	rc = sysfs_create_bin_file(parent, attr);
+out:
+	if (rc) {
+		kfree(name);
+		kfree(attr);
+	}
+
+	return rc;
 }
 
-static ssize_t export_attr_read(struct file *fp, struct kobject *kobj,
-				struct bin_attribute *bin_attr, char *buf,
-				loff_t off, size_t count)
+static void opal_add_exported_attrs(struct device_node *np,
+				    struct kobject *kobj)
 {
-	return memory_read_from_buffer(buf, count, &off, bin_attr->private,
-				       bin_attr->size);
+	struct device_node *child;
+	struct property *prop;
+
+	for_each_property_of_node(np, prop) {
+		int rc;
+
+		if (!strcmp(prop->name, "name") ||
+		    !strcmp(prop->name, "phandle"))
+			continue;
+
+		rc = opal_add_one_export(kobj, prop->name, np, prop->name);
+		if (rc) {
+			pr_warn("Unable to add export %pOF/%s, rc = %d!\n",
+				np, prop->name, rc);
+		}
+	}
+
+	for_each_child_of_node(np, child) {
+		struct kobject *child_kobj;
+
+		child_kobj = kobject_create_and_add(child->name, kobj);
+		if (!child_kobj) {
+			pr_err("Unable to create export dir for %pOF\n", child);
+			continue;
+		}
+
+		opal_add_exported_attrs(child, child_kobj);
+	}
 }
 
 /*
@@ -843,11 +876,8 @@ static ssize_t export_attr_read(struct file *fp, struct kobject *kobj,
  */
 static void opal_export_attrs(void)
 {
-	struct bin_attribute *attr;
 	struct device_node *np;
-	struct property *prop;
 	struct kobject *kobj;
-	u64 vals[2];
 	int rc;
 
 	np = of_find_node_by_path("/ibm,opal/firmware/exports");
@@ -861,41 +891,16 @@ static void opal_export_attrs(void)
 		return;
 	}
 
-	for_each_property_of_node(np, prop) {
-		if (!strcmp(prop->name, "name") || !strcmp(prop->name, "phandle"))
-			continue;
-
-		if (of_property_read_u64_array(np, prop->name, &vals[0], 2))
-			continue;
-
-		attr = kzalloc(sizeof(*attr), GFP_KERNEL);
+	opal_add_exported_attrs(np, kobj);
 
-		if (attr == NULL) {
-			pr_warn("Failed kmalloc for bin_attribute!");
-			continue;
-		}
-
-		sysfs_bin_attr_init(attr);
-		attr->attr.name = kstrdup(prop->name, GFP_KERNEL);
-		attr->attr.mode = 0400;
-		attr->read = export_attr_read;
-		attr->private = __va(vals[0]);
-		attr->size = vals[1];
-
-		if (attr->attr.name == NULL) {
-			pr_warn("Failed kstrdup for bin_attribute attr.name");
-			kfree(attr);
-			continue;
-		}
-
-		rc = sysfs_create_bin_file(kobj, attr);
-		if (rc) {
-			pr_warn("Error %d creating OPAL sysfs exports/%s file\n",
-				 rc, prop->name);
-			kfree(attr->attr.name);
-			kfree(attr);
-		}
-	}
+	/*
+	 * NB: symbol_map existed before the generic export interface so it
+	 * lives under the top level opal_kobj.
+	 */
+	rc = opal_add_one_export(opal_kobj, "symbol_map",
+				 np->parent, "symbol-map");
+	if (rc)
+		pr_warn("Error %d creating OPAL symbols file\n", rc);
 
 	of_node_put(np);
 }
@@ -1042,8 +1047,6 @@ static int __init opal_init(void)
 	/* Create "opal" kobject under /sys/firmware */
 	rc = opal_sysfs_init();
 	if (rc == 0) {
-		/* Export symbol map to userspace */
-		opal_export_symmap();
 		/* Setup dump region interface */
 		opal_dump_region_init();
 		/* Setup error log interface */
@@ -1056,11 +1059,10 @@ static int __init opal_init(void)
 		opal_sys_param_init();
 		/* Setup message log sysfs interface. */
 		opal_msglog_sysfs_init();
+		/* Add all export properties*/
+		opal_export_attrs();
 	}
 
-	/* Export all properties */
-	opal_export_attrs();
-
 	/* Initialize platform devices: IPMI backend, PRD & flash interface */
 	opal_pdev_init("ibm,opal-ipmi");
 	opal_pdev_init("ibm,opal-flash");
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index da1068a9c263..22c22cd7bd82 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -188,7 +188,7 @@ static void pnv_ioda_free_pe(struct pnv_ioda_pe *pe)
 	unsigned int pe_num = pe->pe_number;
 
 	WARN_ON(pe->pdev);
-	WARN_ON(pe->npucomp); /* NPUs are not supposed to be freed */
+	WARN_ON(pe->npucomp); /* NPUs for nvlink are not supposed to be freed */
 	kfree(pe->npucomp);
 	memset(pe, 0, sizeof(struct pnv_ioda_pe));
 	clear_bit(pe_num, phb->ioda.pe_alloc);
@@ -777,6 +777,34 @@ static int pnv_ioda_set_peltv(struct pnv_phb *phb,
 	return 0;
 }
 
+static void pnv_ioda_unset_peltv(struct pnv_phb *phb,
+				 struct pnv_ioda_pe *pe,
+				 struct pci_dev *parent)
+{
+	int64_t rc;
+
+	while (parent) {
+		struct pci_dn *pdn = pci_get_pdn(parent);
+
+		if (pdn && pdn->pe_number != IODA_INVALID_PE) {
+			rc = opal_pci_set_peltv(phb->opal_id, pdn->pe_number,
+						pe->pe_number,
+						OPAL_REMOVE_PE_FROM_DOMAIN);
+			/* XXX What to do in case of error ? */
+		}
+		parent = parent->bus->self;
+	}
+
+	opal_pci_eeh_freeze_clear(phb->opal_id, pe->pe_number,
+				  OPAL_EEH_ACTION_CLEAR_FREEZE_ALL);
+
+	/* Disassociate PE in PELT */
+	rc = opal_pci_set_peltv(phb->opal_id, pe->pe_number,
+				pe->pe_number, OPAL_REMOVE_PE_FROM_DOMAIN);
+	if (rc)
+		pe_warn(pe, "OPAL error %lld remove self from PELTV\n", rc);
+}
+
 static int pnv_ioda_deconfigure_pe(struct pnv_phb *phb, struct pnv_ioda_pe *pe)
 {
 	struct pci_dev *parent;
@@ -792,7 +820,7 @@ static int pnv_ioda_deconfigure_pe(struct pnv_phb *phb, struct pnv_ioda_pe *pe)
 		fcomp = OPAL_IGNORE_RID_FUNCTION_NUMBER;
 		parent = pe->pbus->self;
 		if (pe->flags & PNV_IODA_PE_BUS_ALL)
-			count = pe->pbus->busn_res.end - pe->pbus->busn_res.start + 1;
+			count = resource_size(&pe->pbus->busn_res);
 		else
 			count = 1;
 
@@ -827,25 +855,13 @@ static int pnv_ioda_deconfigure_pe(struct pnv_phb *phb, struct pnv_ioda_pe *pe)
 	for (rid = pe->rid; rid < rid_end; rid++)
 		phb->ioda.pe_rmap[rid] = IODA_INVALID_PE;
 
-	/* Release from all parents PELT-V */
-	while (parent) {
-		struct pci_dn *pdn = pci_get_pdn(parent);
-		if (pdn && pdn->pe_number != IODA_INVALID_PE) {
-			rc = opal_pci_set_peltv(phb->opal_id, pdn->pe_number,
-						pe->pe_number, OPAL_REMOVE_PE_FROM_DOMAIN);
-			/* XXX What to do in case of error ? */
-		}
-		parent = parent->bus->self;
-	}
-
-	opal_pci_eeh_freeze_clear(phb->opal_id, pe->pe_number,
-				  OPAL_EEH_ACTION_CLEAR_FREEZE_ALL);
+	/*
+	 * Release from all parents PELT-V. NPUs don't have a PELTV
+	 * table
+	 */
+	if (phb->type != PNV_PHB_NPU_NVLINK && phb->type != PNV_PHB_NPU_OCAPI)
+		pnv_ioda_unset_peltv(phb, pe, parent);
 
-	/* Disassociate PE in PELT */
-	rc = opal_pci_set_peltv(phb->opal_id, pe->pe_number,
-				pe->pe_number, OPAL_REMOVE_PE_FROM_DOMAIN);
-	if (rc)
-		pe_warn(pe, "OPAL error %lld remove self from PELTV\n", rc);
 	rc = opal_pci_set_pe(phb->opal_id, pe->pe_number, pe->rid,
 			     bcomp, dcomp, fcomp, OPAL_UNMAP_PE);
 	if (rc)
@@ -874,7 +890,7 @@ static int pnv_ioda_configure_pe(struct pnv_phb *phb, struct pnv_ioda_pe *pe)
 		fcomp = OPAL_IGNORE_RID_FUNCTION_NUMBER;
 		parent = pe->pbus->self;
 		if (pe->flags & PNV_IODA_PE_BUS_ALL)
-			count = pe->pbus->busn_res.end - pe->pbus->busn_res.start + 1;
+			count = resource_size(&pe->pbus->busn_res);
 		else
 			count = 1;
 
@@ -1062,20 +1078,20 @@ static struct pnv_ioda_pe *pnv_ioda_setup_dev_PE(struct pci_dev *dev)
 		return NULL;
 	}
 
-	/* NOTE: We get only one ref to the pci_dev for the pdn, not for the
-	 * pointer in the PE data structure, both should be destroyed at the
-	 * same time. However, this needs to be looked at more closely again
-	 * once we actually start removing things (Hotplug, SR-IOV, ...)
+	/* NOTE: We don't get a reference for the pointer in the PE
+	 * data structure, both the device and PE structures should be
+	 * destroyed at the same time. However, removing nvlink
+	 * devices will need some work.
 	 *
 	 * At some point we want to remove the PDN completely anyways
 	 */
-	pci_dev_get(dev);
 	pdn->pe_number = pe->pe_number;
 	pe->flags = PNV_IODA_PE_DEV;
 	pe->pdev = dev;
 	pe->pbus = NULL;
 	pe->mve_number = -1;
 	pe->rid = dev->bus->number << 8 | pdn->devfn;
+	pe->device_count++;
 
 	pe_info(pe, "Associated device to PE\n");
 
@@ -1084,13 +1100,13 @@ static struct pnv_ioda_pe *pnv_ioda_setup_dev_PE(struct pci_dev *dev)
 		pnv_ioda_free_pe(pe);
 		pdn->pe_number = IODA_INVALID_PE;
 		pe->pdev = NULL;
-		pci_dev_put(dev);
 		return NULL;
 	}
 
 	/* Put PE to the list */
+	mutex_lock(&phb->ioda.pe_list_mutex);
 	list_add_tail(&pe->list, &phb->ioda.pe_list);
-
+	mutex_unlock(&phb->ioda.pe_list_mutex);
 	return pe;
 }
 
@@ -1206,6 +1222,14 @@ static struct pnv_ioda_pe *pnv_ioda_setup_npu_PE(struct pci_dev *npu_pdev)
 	struct pnv_phb *phb = hose->private_data;
 
 	/*
+	 * Intentionally leak a reference on the npu device (for
+	 * nvlink only; this is not an opencapi path) to make sure it
+	 * never goes away, as it's been the case all along and some
+	 * work is needed otherwise.
+	 */
+	pci_dev_get(npu_pdev);
+
+	/*
 	 * Due to a hardware errata PE#0 on the NPU is reserved for
 	 * error handling. This means we only have three PEs remaining
 	 * which need to be assigned to four links, implying some
@@ -1228,11 +1252,11 @@ static struct pnv_ioda_pe *pnv_ioda_setup_npu_PE(struct pci_dev *npu_pdev)
 			 */
 			dev_info(&npu_pdev->dev,
 				"Associating to existing PE %x\n", pe_num);
-			pci_dev_get(npu_pdev);
 			npu_pdn = pci_get_pdn(npu_pdev);
 			rid = npu_pdev->bus->number << 8 | npu_pdn->devfn;
 			npu_pdn->pe_number = pe_num;
 			phb->ioda.pe_rmap[rid] = pe->pe_number;
+			pe->device_count++;
 
 			/* Map the PE to this link */
 			rc = opal_pci_set_pe(phb->opal_id, pe_num, rid,
@@ -1268,8 +1292,6 @@ static void pnv_pci_ioda_setup_PEs(void)
 {
 	struct pci_controller *hose;
 	struct pnv_phb *phb;
-	struct pci_bus *bus;
-	struct pci_dev *pdev;
 	struct pnv_ioda_pe *pe;
 
 	list_for_each_entry(hose, &hose_list, list_node) {
@@ -1281,11 +1303,6 @@ static void pnv_pci_ioda_setup_PEs(void)
 			if (phb->model == PNV_PHB_MODEL_NPU2)
 				WARN_ON_ONCE(pnv_npu2_init(hose));
 		}
-		if (phb->type == PNV_PHB_NPU_OCAPI) {
-			bus = hose->bus;
-			list_for_each_entry(pdev, &bus->devices, bus_list)
-				pnv_ioda_setup_dev_PE(pdev);
-		}
 	}
 	list_for_each_entry(hose, &hose_list, list_node) {
 		phb = hose->private_data;
@@ -1558,6 +1575,10 @@ static void pnv_ioda_setup_vf_PE(struct pci_dev *pdev, u16 num_vfs)
 
 	/* Reserve PE for each VF */
 	for (vf_index = 0; vf_index < num_vfs; vf_index++) {
+		int vf_devfn = pci_iov_virtfn_devfn(pdev, vf_index);
+		int vf_bus = pci_iov_virtfn_bus(pdev, vf_index);
+		struct pci_dn *vf_pdn;
+
 		if (pdn->m64_single_mode)
 			pe_num = pdn->pe_num_map[vf_index];
 		else
@@ -1570,13 +1591,11 @@ static void pnv_ioda_setup_vf_PE(struct pci_dev *pdev, u16 num_vfs)
 		pe->pbus = NULL;
 		pe->parent_dev = pdev;
 		pe->mve_number = -1;
-		pe->rid = (pci_iov_virtfn_bus(pdev, vf_index) << 8) |
-			   pci_iov_virtfn_devfn(pdev, vf_index);
+		pe->rid = (vf_bus << 8) | vf_devfn;
 
 		pe_info(pe, "VF %04d:%02d:%02d.%d associated with PE#%x\n",
 			hose->global_number, pdev->bus->number,
-			PCI_SLOT(pci_iov_virtfn_devfn(pdev, vf_index)),
-			PCI_FUNC(pci_iov_virtfn_devfn(pdev, vf_index)), pe_num);
+			PCI_SLOT(vf_devfn), PCI_FUNC(vf_devfn), pe_num);
 
 		if (pnv_ioda_configure_pe(phb, pe)) {
 			/* XXX What do we do here ? */
@@ -1590,6 +1609,15 @@ static void pnv_ioda_setup_vf_PE(struct pci_dev *pdev, u16 num_vfs)
 		list_add_tail(&pe->list, &phb->ioda.pe_list);
 		mutex_unlock(&phb->ioda.pe_list_mutex);
 
+		/* associate this pe to it's pdn */
+		list_for_each_entry(vf_pdn, &pdn->parent->child_list, list) {
+			if (vf_pdn->busno == vf_bus &&
+			    vf_pdn->devfn == vf_devfn) {
+				vf_pdn->pe_number = pe_num;
+				break;
+			}
+		}
+
 		pnv_pci_ioda2_setup_dma_pe(phb, pe);
 #ifdef CONFIG_IOMMU_API
 		iommu_register_group(&pe->table_group,
@@ -1719,21 +1747,23 @@ int pnv_pcibios_sriov_disable(struct pci_dev *pdev)
 	pnv_pci_sriov_disable(pdev);
 
 	/* Release PCI data */
-	remove_dev_pci_data(pdev);
+	remove_sriov_vf_pdns(pdev);
 	return 0;
 }
 
 int pnv_pcibios_sriov_enable(struct pci_dev *pdev, u16 num_vfs)
 {
 	/* Allocate PCI data */
-	add_dev_pci_data(pdev);
+	add_sriov_vf_pdns(pdev);
 
 	return pnv_pci_sriov_enable(pdev, num_vfs);
 }
 #endif /* CONFIG_PCI_IOV */
 
-static void pnv_pci_ioda_dma_dev_setup(struct pnv_phb *phb, struct pci_dev *pdev)
+static void pnv_pci_ioda_dma_dev_setup(struct pci_dev *pdev)
 {
+	struct pci_controller *hose = pci_bus_to_host(pdev->bus);
+	struct pnv_phb *phb = hose->private_data;
 	struct pci_dn *pdn = pci_get_pdn(pdev);
 	struct pnv_ioda_pe *pe;
 
@@ -2889,9 +2919,6 @@ static void pnv_pci_ioda_fixup_iov_resources(struct pci_dev *pdev)
 	struct pci_dn *pdn;
 	int mul, total_vfs;
 
-	if (!pdev->is_physfn || pci_dev_is_added(pdev))
-		return;
-
 	pdn = pci_get_pdn(pdev);
 	pdn->vfs_expanded = 0;
 	pdn->m64_single_mode = false;
@@ -2966,6 +2993,30 @@ truncate_iov:
 		res->end = res->start - 1;
 	}
 }
+
+static void pnv_pci_ioda_fixup_iov(struct pci_dev *pdev)
+{
+	if (WARN_ON(pci_dev_is_added(pdev)))
+		return;
+
+	if (pdev->is_virtfn) {
+		struct pnv_ioda_pe *pe = pnv_ioda_get_pe(pdev);
+
+		/*
+		 * VF PEs are single-device PEs so their pdev pointer needs to
+		 * be set. The pdev doesn't exist when the PE is allocated (in
+		 * (pcibios_sriov_enable()) so we fix it up here.
+		 */
+		pe->pdev = pdev;
+		WARN_ON(!(pe->flags & PNV_IODA_PE_VF));
+	} else if (pdev->is_physfn) {
+		/*
+		 * For PFs adjust their allocated IOV resources to match what
+		 * the PHB can support using it's M64 BAR table.
+		 */
+		pnv_pci_ioda_fixup_iov_resources(pdev);
+	}
+}
 #endif /* CONFIG_PCI_IOV */
 
 static void pnv_ioda_setup_pe_res(struct pnv_ioda_pe *pe,
@@ -3062,19 +3113,9 @@ static void pnv_ioda_setup_pe_seg(struct pnv_ioda_pe *pe)
 #ifdef CONFIG_DEBUG_FS
 static int pnv_pci_diag_data_set(void *data, u64 val)
 {
-	struct pci_controller *hose;
-	struct pnv_phb *phb;
+	struct pnv_phb *phb = data;
 	s64 ret;
 
-	if (val != 1ULL)
-		return -EINVAL;
-
-	hose = (struct pci_controller *)data;
-	if (!hose || !hose->private_data)
-		return -ENODEV;
-
-	phb = hose->private_data;
-
 	/* Retrieve the diag data from firmware */
 	ret = opal_pci_get_phb_diag_data2(phb->opal_id, phb->diag_data,
 					  phb->diag_data_size);
@@ -3089,6 +3130,33 @@ static int pnv_pci_diag_data_set(void *data, u64 val)
 DEFINE_DEBUGFS_ATTRIBUTE(pnv_pci_diag_data_fops, NULL, pnv_pci_diag_data_set,
 			 "%llu\n");
 
+static int pnv_pci_ioda_pe_dump(void *data, u64 val)
+{
+	struct pnv_phb *phb = data;
+	int pe_num;
+
+	for (pe_num = 0; pe_num < phb->ioda.total_pe_num; pe_num++) {
+		struct pnv_ioda_pe *pe = &phb->ioda.pe_array[pe_num];
+
+		if (!test_bit(pe_num, phb->ioda.pe_alloc))
+			continue;
+
+		pe_warn(pe, "rid: %04x dev count: %2d flags: %s%s%s%s%s%s\n",
+			pe->rid, pe->device_count,
+			(pe->flags & PNV_IODA_PE_DEV) ? "dev " : "",
+			(pe->flags & PNV_IODA_PE_BUS) ? "bus " : "",
+			(pe->flags & PNV_IODA_PE_BUS_ALL) ? "all " : "",
+			(pe->flags & PNV_IODA_PE_MASTER) ? "master " : "",
+			(pe->flags & PNV_IODA_PE_SLAVE) ? "slave " : "",
+			(pe->flags & PNV_IODA_PE_VF) ? "vf " : "");
+	}
+
+	return 0;
+}
+
+DEFINE_DEBUGFS_ATTRIBUTE(pnv_pci_ioda_pe_dump_fops, NULL,
+			 pnv_pci_ioda_pe_dump, "%llu\n");
+
 #endif /* CONFIG_DEBUG_FS */
 
 static void pnv_pci_ioda_create_dbgfs(void)
@@ -3113,7 +3181,9 @@ static void pnv_pci_ioda_create_dbgfs(void)
 		}
 
 		debugfs_create_file_unsafe("dump_diag_regs", 0200, phb->dbgfs,
-					   hose, &pnv_pci_diag_data_fops);
+					   phb, &pnv_pci_diag_data_fops);
+		debugfs_create_file_unsafe("dump_ioda_pe_state", 0200, phb->dbgfs,
+					   phb, &pnv_pci_ioda_pe_dump_fops);
 	}
 #endif /* CONFIG_DEBUG_FS */
 }
@@ -3383,6 +3453,28 @@ static bool pnv_pci_enable_device_hook(struct pci_dev *dev)
 	return true;
 }
 
+static bool pnv_ocapi_enable_device_hook(struct pci_dev *dev)
+{
+	struct pci_controller *hose = pci_bus_to_host(dev->bus);
+	struct pnv_phb *phb = hose->private_data;
+	struct pci_dn *pdn;
+	struct pnv_ioda_pe *pe;
+
+	if (!phb->initialized)
+		return true;
+
+	pdn = pci_get_pdn(dev);
+	if (!pdn)
+		return false;
+
+	if (pdn->pe_number == IODA_INVALID_PE) {
+		pe = pnv_ioda_setup_dev_PE(dev);
+		if (!pe)
+			return false;
+	}
+	return true;
+}
+
 static long pnv_pci_ioda1_unset_window(struct iommu_table_group *table_group,
 				       int num)
 {
@@ -3512,7 +3604,10 @@ static void pnv_ioda_release_pe(struct pnv_ioda_pe *pe)
 	struct pnv_phb *phb = pe->phb;
 	struct pnv_ioda_pe *slave, *tmp;
 
+	mutex_lock(&phb->ioda.pe_list_mutex);
 	list_del(&pe->list);
+	mutex_unlock(&phb->ioda.pe_list_mutex);
+
 	switch (phb->type) {
 	case PNV_PHB_IODA1:
 		pnv_pci_ioda1_release_pe_dma(pe);
@@ -3520,6 +3615,8 @@ static void pnv_ioda_release_pe(struct pnv_ioda_pe *pe)
 	case PNV_PHB_IODA2:
 		pnv_pci_ioda2_release_pe_dma(pe);
 		break;
+	case PNV_PHB_NPU_OCAPI:
+		break;
 	default:
 		WARN_ON(1);
 	}
@@ -3594,9 +3691,29 @@ static void pnv_pci_ioda_shutdown(struct pci_controller *hose)
 		       OPAL_ASSERT_RESET);
 }
 
+static void pnv_pci_ioda_dma_bus_setup(struct pci_bus *bus)
+{
+	struct pci_controller *hose = bus->sysdata;
+	struct pnv_phb *phb = hose->private_data;
+	struct pnv_ioda_pe *pe;
+
+	list_for_each_entry(pe, &phb->ioda.pe_list, list) {
+		if (!(pe->flags & (PNV_IODA_PE_BUS | PNV_IODA_PE_BUS_ALL)))
+			continue;
+
+		if (!pe->pbus)
+			continue;
+
+		if (bus->number == ((pe->rid >> 8) & 0xFF)) {
+			pe->pbus = bus;
+			break;
+		}
+	}
+}
+
 static const struct pci_controller_ops pnv_pci_ioda_controller_ops = {
-	.dma_dev_setup		= pnv_pci_dma_dev_setup,
-	.dma_bus_setup		= pnv_pci_dma_bus_setup,
+	.dma_dev_setup		= pnv_pci_ioda_dma_dev_setup,
+	.dma_bus_setup		= pnv_pci_ioda_dma_bus_setup,
 	.iommu_bypass_supported	= pnv_pci_ioda_iommu_bypass_supported,
 	.setup_msi_irqs		= pnv_setup_msi_irqs,
 	.teardown_msi_irqs	= pnv_teardown_msi_irqs,
@@ -3609,7 +3726,6 @@ static const struct pci_controller_ops pnv_pci_ioda_controller_ops = {
 };
 
 static const struct pci_controller_ops pnv_npu_ioda_controller_ops = {
-	.dma_dev_setup		= pnv_pci_dma_dev_setup,
 	.setup_msi_irqs		= pnv_setup_msi_irqs,
 	.teardown_msi_irqs	= pnv_teardown_msi_irqs,
 	.enable_device_hook	= pnv_pci_enable_device_hook,
@@ -3620,7 +3736,8 @@ static const struct pci_controller_ops pnv_npu_ioda_controller_ops = {
 };
 
 static const struct pci_controller_ops pnv_npu_ocapi_ioda_controller_ops = {
-	.enable_device_hook	= pnv_pci_enable_device_hook,
+	.enable_device_hook	= pnv_ocapi_enable_device_hook,
+	.release_device		= pnv_pci_release_device,
 	.window_alignment	= pnv_pci_window_alignment,
 	.reset_secondary_bus	= pnv_pci_reset_secondary_bus,
 	.shutdown		= pnv_pci_ioda_shutdown,
@@ -3855,14 +3972,13 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np,
 		hose->controller_ops = pnv_npu_ocapi_ioda_controller_ops;
 		break;
 	default:
-		phb->dma_dev_setup = pnv_pci_ioda_dma_dev_setup;
 		hose->controller_ops = pnv_pci_ioda_controller_ops;
 	}
 
 	ppc_md.pcibios_default_alignment = pnv_pci_default_alignment;
 
 #ifdef CONFIG_PCI_IOV
-	ppc_md.pcibios_fixup_sriov = pnv_pci_ioda_fixup_iov_resources;
+	ppc_md.pcibios_fixup_sriov = pnv_pci_ioda_fixup_iov;
 	ppc_md.pcibios_iov_resource_alignment = pnv_pci_iov_resource_alignment;
 	ppc_md.pcibios_sriov_enable = pnv_pcibios_sriov_enable;
 	ppc_md.pcibios_sriov_disable = pnv_pcibios_sriov_disable;
diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c
index c0bea75ac27b..5bf818246339 100644
--- a/arch/powerpc/platforms/powernv/pci.c
+++ b/arch/powerpc/platforms/powernv/pci.c
@@ -38,7 +38,7 @@ static DEFINE_MUTEX(tunnel_mutex);
 
 int pnv_pci_get_slot_id(struct device_node *np, uint64_t *id)
 {
-	struct device_node *parent = np;
+	struct device_node *node = np;
 	u32 bdfn;
 	u64 phbid;
 	int ret;
@@ -48,25 +48,29 @@ int pnv_pci_get_slot_id(struct device_node *np, uint64_t *id)
 		return -ENXIO;
 
 	bdfn = ((bdfn & 0x00ffff00) >> 8);
-	while ((parent = of_get_parent(parent))) {
-		if (!PCI_DN(parent)) {
-			of_node_put(parent);
+	for (node = np; node; node = of_get_parent(node)) {
+		if (!PCI_DN(node)) {
+			of_node_put(node);
 			break;
 		}
 
-		if (!of_device_is_compatible(parent, "ibm,ioda2-phb") &&
-		    !of_device_is_compatible(parent, "ibm,ioda3-phb")) {
-			of_node_put(parent);
+		if (!of_device_is_compatible(node, "ibm,ioda2-phb") &&
+		    !of_device_is_compatible(node, "ibm,ioda3-phb") &&
+		    !of_device_is_compatible(node, "ibm,ioda2-npu2-opencapi-phb")) {
+			of_node_put(node);
 			continue;
 		}
 
-		ret = of_property_read_u64(parent, "ibm,opal-phbid", &phbid);
+		ret = of_property_read_u64(node, "ibm,opal-phbid", &phbid);
 		if (ret) {
-			of_node_put(parent);
+			of_node_put(node);
 			return -ENXIO;
 		}
 
-		*id = PCI_SLOT_ID(phbid, bdfn);
+		if (of_device_is_compatible(node, "ibm,ioda2-npu2-opencapi-phb"))
+			*id = PCI_PHB_SLOT_ID(phbid);
+		else
+			*id = PCI_SLOT_ID(phbid, bdfn);
 		return 0;
 	}
 
@@ -810,53 +814,6 @@ struct iommu_table *pnv_pci_table_alloc(int nid)
 	return tbl;
 }
 
-void pnv_pci_dma_dev_setup(struct pci_dev *pdev)
-{
-	struct pci_controller *hose = pci_bus_to_host(pdev->bus);
-	struct pnv_phb *phb = hose->private_data;
-#ifdef CONFIG_PCI_IOV
-	struct pnv_ioda_pe *pe;
-	struct pci_dn *pdn;
-
-	/* Fix the VF pdn PE number */
-	if (pdev->is_virtfn) {
-		pdn = pci_get_pdn(pdev);
-		WARN_ON(pdn->pe_number != IODA_INVALID_PE);
-		list_for_each_entry(pe, &phb->ioda.pe_list, list) {
-			if (pe->rid == ((pdev->bus->number << 8) |
-			    (pdev->devfn & 0xff))) {
-				pdn->pe_number = pe->pe_number;
-				pe->pdev = pdev;
-				break;
-			}
-		}
-	}
-#endif /* CONFIG_PCI_IOV */
-
-	if (phb && phb->dma_dev_setup)
-		phb->dma_dev_setup(phb, pdev);
-}
-
-void pnv_pci_dma_bus_setup(struct pci_bus *bus)
-{
-	struct pci_controller *hose = bus->sysdata;
-	struct pnv_phb *phb = hose->private_data;
-	struct pnv_ioda_pe *pe;
-
-	list_for_each_entry(pe, &phb->ioda.pe_list, list) {
-		if (!(pe->flags & (PNV_IODA_PE_BUS | PNV_IODA_PE_BUS_ALL)))
-			continue;
-
-		if (!pe->pbus)
-			continue;
-
-		if (bus->number == ((pe->rid >> 8) & 0xFF)) {
-			pe->pbus = bus;
-			break;
-		}
-	}
-}
-
 struct device_node *pnv_pci_get_phb_node(struct pci_dev *dev)
 {
 	struct pci_controller *hose = pci_bus_to_host(dev->bus);
diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h
index f914f0b14e4e..d3bbdeab3a32 100644
--- a/arch/powerpc/platforms/powernv/pci.h
+++ b/arch/powerpc/platforms/powernv/pci.h
@@ -108,7 +108,6 @@ struct pnv_phb {
 	int (*msi_setup)(struct pnv_phb *phb, struct pci_dev *dev,
 			 unsigned int hwirq, unsigned int virq,
 			 unsigned int is_64, struct msi_msg *msg);
-	void (*dma_dev_setup)(struct pnv_phb *phb, struct pci_dev *pdev);
 	int (*init_m64)(struct pnv_phb *phb);
 	int (*get_pe_state)(struct pnv_phb *phb, int pe_no);
 	void (*freeze_pe)(struct pnv_phb *phb, int pe_no);
@@ -189,8 +188,6 @@ extern void pnv_npu2_map_lpar(struct pnv_ioda_pe *gpe, unsigned long msr);
 extern void pnv_pci_reset_secondary_bus(struct pci_dev *dev);
 extern int pnv_eeh_phb_reset(struct pci_controller *hose, int option);
 
-extern void pnv_pci_dma_dev_setup(struct pci_dev *pdev);
-extern void pnv_pci_dma_bus_setup(struct pci_bus *bus);
 extern int pnv_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type);
 extern void pnv_teardown_msi_irqs(struct pci_dev *pdev);
 extern struct pnv_ioda_pe *pnv_ioda_get_pe(struct pci_dev *dev);
diff --git a/arch/powerpc/platforms/powernv/setup.c b/arch/powerpc/platforms/powernv/setup.c
index 83498604d322..11fdae81b5dd 100644
--- a/arch/powerpc/platforms/powernv/setup.c
+++ b/arch/powerpc/platforms/powernv/setup.c
@@ -233,6 +233,10 @@ static void  __noreturn pnv_restart(char *cmd)
 			rc = opal_cec_reboot();
 		else if (strcmp(cmd, "full") == 0)
 			rc = opal_cec_reboot2(OPAL_REBOOT_FULL_IPL, NULL);
+		else if (strcmp(cmd, "mpipl") == 0)
+			rc = opal_cec_reboot2(OPAL_REBOOT_MPIPL, NULL);
+		else if (strcmp(cmd, "error") == 0)
+			rc = opal_cec_reboot2(OPAL_REBOOT_PLATFORM_ERROR, NULL);
 		else
 			rc = OPAL_UNSUPPORTED;
 
diff --git a/arch/powerpc/platforms/ps3/setup.c b/arch/powerpc/platforms/ps3/setup.c
index 8108b9b9b9ea..b29368931c56 100644
--- a/arch/powerpc/platforms/ps3/setup.c
+++ b/arch/powerpc/platforms/ps3/setup.c
@@ -200,10 +200,6 @@ static void __init ps3_setup_arch(void)
 	smp_init_ps3();
 #endif
 
-#ifdef CONFIG_DUMMY_CONSOLE
-	conswitchp = &dummy_con;
-#endif
-
 	prealloc_ps3fb_videomemory();
 	prealloc_ps3flash_bounce_buffer();
 
diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig
index 595e9f8a6539..24c18362e5ea 100644
--- a/arch/powerpc/platforms/pseries/Kconfig
+++ b/arch/powerpc/platforms/pseries/Kconfig
@@ -21,7 +21,6 @@ config PPC_PSERIES
 	select PPC_DOORBELL
 	select HOTPLUG_CPU
 	select ARCH_RANDOM
-	select PPC_DOORBELL
 	select FORCE_SMP
 	select SWIOTLB
 	default y
diff --git a/arch/powerpc/platforms/pseries/firmware.c b/arch/powerpc/platforms/pseries/firmware.c
index d4a8f1702417..3e49cc23a97a 100644
--- a/arch/powerpc/platforms/pseries/firmware.c
+++ b/arch/powerpc/platforms/pseries/firmware.c
@@ -22,6 +22,7 @@
 #include <asm/firmware.h>
 #include <asm/prom.h>
 #include <asm/udbg.h>
+#include <asm/svm.h>
 
 #include "pseries.h"
 
@@ -55,7 +56,8 @@ hypertas_fw_features_table[] = {
 	{FW_FEATURE_LLAN,		"hcall-lLAN"},
 	{FW_FEATURE_BULK_REMOVE,	"hcall-bulk"},
 	{FW_FEATURE_XDABR,		"hcall-xdabr"},
-	{FW_FEATURE_MULTITCE,		"hcall-multi-tce"},
+	{FW_FEATURE_PUT_TCE_IND | FW_FEATURE_STUFF_TCE,
+					"hcall-multi-tce"},
 	{FW_FEATURE_SPLPAR,		"hcall-splpar"},
 	{FW_FEATURE_VPHN,		"hcall-vphn"},
 	{FW_FEATURE_SET_MODE,		"hcall-set-mode"},
@@ -100,6 +102,12 @@ static void __init fw_hypertas_feature_init(const char *hypertas,
 		}
 	}
 
+	if (is_secure_guest() &&
+	    (powerpc_firmware_features & FW_FEATURE_PUT_TCE_IND)) {
+		powerpc_firmware_features &= ~FW_FEATURE_PUT_TCE_IND;
+		pr_debug("SVM: disabling PUT_TCE_IND firmware feature\n");
+	}
+
 	pr_debug(" <- fw_hypertas_feature_init()\n");
 }
 
diff --git a/arch/powerpc/platforms/pseries/hotplug-memory.c b/arch/powerpc/platforms/pseries/hotplug-memory.c
index c126b94d1943..a4d40a3ceea3 100644
--- a/arch/powerpc/platforms/pseries/hotplug-memory.c
+++ b/arch/powerpc/platforms/pseries/hotplug-memory.c
@@ -360,8 +360,10 @@ static bool lmb_is_removable(struct drmem_lmb *lmb)
 
 	for (i = 0; i < scns_per_block; i++) {
 		pfn = PFN_DOWN(phys_addr);
-		if (!pfn_present(pfn))
+		if (!pfn_present(pfn)) {
+			phys_addr += MIN_MEMORY_BLOCK_SIZE;
 			continue;
+		}
 
 		rc = rc && is_mem_section_removable(pfn, PAGES_PER_SECTION);
 		phys_addr += MIN_MEMORY_BLOCK_SIZE;
diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index 6ba081dd61c9..2e0a8eab5588 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -36,7 +36,6 @@
 #include <asm/udbg.h>
 #include <asm/mmzone.h>
 #include <asm/plpar_wrappers.h>
-#include <asm/svm.h>
 
 #include "pseries.h"
 
@@ -133,10 +132,10 @@ static unsigned long tce_get_pseries(struct iommu_table *tbl, long index)
 	return be64_to_cpu(*tcep);
 }
 
-static void tce_free_pSeriesLP(struct iommu_table*, long, long);
+static void tce_free_pSeriesLP(unsigned long liobn, long, long);
 static void tce_freemulti_pSeriesLP(struct iommu_table*, long, long);
 
-static int tce_build_pSeriesLP(struct iommu_table *tbl, long tcenum,
+static int tce_build_pSeriesLP(unsigned long liobn, long tcenum, long tceshift,
 				long npages, unsigned long uaddr,
 				enum dma_data_direction direction,
 				unsigned long attrs)
@@ -147,25 +146,25 @@ static int tce_build_pSeriesLP(struct iommu_table *tbl, long tcenum,
 	int ret = 0;
 	long tcenum_start = tcenum, npages_start = npages;
 
-	rpn = __pa(uaddr) >> TCE_SHIFT;
+	rpn = __pa(uaddr) >> tceshift;
 	proto_tce = TCE_PCI_READ;
 	if (direction != DMA_TO_DEVICE)
 		proto_tce |= TCE_PCI_WRITE;
 
 	while (npages--) {
-		tce = proto_tce | (rpn & TCE_RPN_MASK) << TCE_RPN_SHIFT;
-		rc = plpar_tce_put((u64)tbl->it_index, (u64)tcenum << 12, tce);
+		tce = proto_tce | (rpn & TCE_RPN_MASK) << tceshift;
+		rc = plpar_tce_put((u64)liobn, (u64)tcenum << tceshift, tce);
 
 		if (unlikely(rc == H_NOT_ENOUGH_RESOURCES)) {
 			ret = (int)rc;
-			tce_free_pSeriesLP(tbl, tcenum_start,
+			tce_free_pSeriesLP(liobn, tcenum_start,
 			                   (npages_start - (npages + 1)));
 			break;
 		}
 
 		if (rc && printk_ratelimit()) {
 			printk("tce_build_pSeriesLP: plpar_tce_put failed. rc=%lld\n", rc);
-			printk("\tindex   = 0x%llx\n", (u64)tbl->it_index);
+			printk("\tindex   = 0x%llx\n", (u64)liobn);
 			printk("\ttcenum  = 0x%llx\n", (u64)tcenum);
 			printk("\ttce val = 0x%llx\n", tce );
 			dump_stack();
@@ -193,8 +192,9 @@ static int tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum,
 	int ret = 0;
 	unsigned long flags;
 
-	if ((npages == 1) || !firmware_has_feature(FW_FEATURE_MULTITCE)) {
-		return tce_build_pSeriesLP(tbl, tcenum, npages, uaddr,
+	if ((npages == 1) || !firmware_has_feature(FW_FEATURE_PUT_TCE_IND)) {
+		return tce_build_pSeriesLP(tbl->it_index, tcenum,
+					   tbl->it_page_shift, npages, uaddr,
 		                           direction, attrs);
 	}
 
@@ -210,8 +210,9 @@ static int tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum,
 		/* If allocation fails, fall back to the loop implementation */
 		if (!tcep) {
 			local_irq_restore(flags);
-			return tce_build_pSeriesLP(tbl, tcenum, npages, uaddr,
-					    direction, attrs);
+			return tce_build_pSeriesLP(tbl->it_index, tcenum,
+					tbl->it_page_shift,
+					npages, uaddr, direction, attrs);
 		}
 		__this_cpu_write(tce_page, tcep);
 	}
@@ -262,16 +263,16 @@ static int tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum,
 	return ret;
 }
 
-static void tce_free_pSeriesLP(struct iommu_table *tbl, long tcenum, long npages)
+static void tce_free_pSeriesLP(unsigned long liobn, long tcenum, long npages)
 {
 	u64 rc;
 
 	while (npages--) {
-		rc = plpar_tce_put((u64)tbl->it_index, (u64)tcenum << 12, 0);
+		rc = plpar_tce_put((u64)liobn, (u64)tcenum << 12, 0);
 
 		if (rc && printk_ratelimit()) {
 			printk("tce_free_pSeriesLP: plpar_tce_put failed. rc=%lld\n", rc);
-			printk("\tindex   = 0x%llx\n", (u64)tbl->it_index);
+			printk("\tindex   = 0x%llx\n", (u64)liobn);
 			printk("\ttcenum  = 0x%llx\n", (u64)tcenum);
 			dump_stack();
 		}
@@ -285,8 +286,8 @@ static void tce_freemulti_pSeriesLP(struct iommu_table *tbl, long tcenum, long n
 {
 	u64 rc;
 
-	if (!firmware_has_feature(FW_FEATURE_MULTITCE))
-		return tce_free_pSeriesLP(tbl, tcenum, npages);
+	if (!firmware_has_feature(FW_FEATURE_STUFF_TCE))
+		return tce_free_pSeriesLP(tbl->it_index, tcenum, npages);
 
 	rc = plpar_tce_stuff((u64)tbl->it_index, (u64)tcenum << 12, 0, npages);
 
@@ -401,6 +402,19 @@ static int tce_setrange_multi_pSeriesLP(unsigned long start_pfn,
 	u64 rc = 0;
 	long l, limit;
 
+	if (!firmware_has_feature(FW_FEATURE_PUT_TCE_IND)) {
+		unsigned long tceshift = be32_to_cpu(maprange->tce_shift);
+		unsigned long dmastart = (start_pfn << PAGE_SHIFT) +
+				be64_to_cpu(maprange->dma_base);
+		unsigned long tcenum = dmastart >> tceshift;
+		unsigned long npages = num_pfn << PAGE_SHIFT >> tceshift;
+		void *uaddr = __va(start_pfn << PAGE_SHIFT);
+
+		return tce_build_pSeriesLP(be32_to_cpu(maprange->liobn),
+				tcenum, tceshift, npages, (unsigned long) uaddr,
+				DMA_BIDIRECTIONAL, 0);
+	}
+
 	local_irq_disable();	/* to protect tcep and the page behind it */
 	tcep = __this_cpu_read(tce_page);
 
@@ -1320,24 +1334,18 @@ void iommu_init_early_pSeries(void)
 	of_reconfig_notifier_register(&iommu_reconfig_nb);
 	register_memory_notifier(&iommu_mem_nb);
 
-	/*
-	 * Secure guest memory is inacessible to devices so regular DMA isn't
-	 * possible.
-	 *
-	 * In that case keep devices' dma_map_ops as NULL so that the generic
-	 * DMA code path will use SWIOTLB to bounce buffers for DMA.
-	 */
-	if (!is_secure_guest())
-		set_pci_dma_ops(&dma_iommu_ops);
+	set_pci_dma_ops(&dma_iommu_ops);
 }
 
 static int __init disable_multitce(char *str)
 {
 	if (strcmp(str, "off") == 0 &&
 	    firmware_has_feature(FW_FEATURE_LPAR) &&
-	    firmware_has_feature(FW_FEATURE_MULTITCE)) {
+	    (firmware_has_feature(FW_FEATURE_PUT_TCE_IND) ||
+	     firmware_has_feature(FW_FEATURE_STUFF_TCE))) {
 		printk(KERN_INFO "Disabling MULTITCE firmware feature\n");
-		powerpc_firmware_features &= ~FW_FEATURE_MULTITCE;
+		powerpc_firmware_features &=
+			~(FW_FEATURE_PUT_TCE_IND | FW_FEATURE_STUFF_TCE);
 	}
 	return 1;
 }
diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c
index 60cb29ae4739..3c3da25b445c 100644
--- a/arch/powerpc/platforms/pseries/lpar.c
+++ b/arch/powerpc/platforms/pseries/lpar.c
@@ -582,12 +582,12 @@ static int vcpudispatch_stats_open(struct inode *inode, struct file *file)
 	return single_open(file, vcpudispatch_stats_display, NULL);
 }
 
-static const struct file_operations vcpudispatch_stats_proc_ops = {
-	.open		= vcpudispatch_stats_open,
-	.read		= seq_read,
-	.write		= vcpudispatch_stats_write,
-	.llseek		= seq_lseek,
-	.release	= single_release,
+static const struct proc_ops vcpudispatch_stats_proc_ops = {
+	.proc_open	= vcpudispatch_stats_open,
+	.proc_read	= seq_read,
+	.proc_write	= vcpudispatch_stats_write,
+	.proc_lseek	= seq_lseek,
+	.proc_release	= single_release,
 };
 
 static ssize_t vcpudispatch_stats_freq_write(struct file *file,
@@ -626,12 +626,12 @@ static int vcpudispatch_stats_freq_open(struct inode *inode, struct file *file)
 	return single_open(file, vcpudispatch_stats_freq_display, NULL);
 }
 
-static const struct file_operations vcpudispatch_stats_freq_proc_ops = {
-	.open		= vcpudispatch_stats_freq_open,
-	.read		= seq_read,
-	.write		= vcpudispatch_stats_freq_write,
-	.llseek		= seq_lseek,
-	.release	= single_release,
+static const struct proc_ops vcpudispatch_stats_freq_proc_ops = {
+	.proc_open	= vcpudispatch_stats_freq_open,
+	.proc_read	= seq_read,
+	.proc_write	= vcpudispatch_stats_freq_write,
+	.proc_lseek	= seq_lseek,
+	.proc_release	= single_release,
 };
 
 static int __init vcpudispatch_stats_procfs_init(void)
diff --git a/arch/powerpc/platforms/pseries/lparcfg.c b/arch/powerpc/platforms/pseries/lparcfg.c
index e33e8bc4b69b..b8d28ab88178 100644
--- a/arch/powerpc/platforms/pseries/lparcfg.c
+++ b/arch/powerpc/platforms/pseries/lparcfg.c
@@ -435,10 +435,10 @@ static void maxmem_data(struct seq_file *m)
 {
 	unsigned long maxmem = 0;
 
-	maxmem += drmem_info->n_lmbs * drmem_info->lmb_size;
+	maxmem += (unsigned long)drmem_info->n_lmbs * drmem_info->lmb_size;
 	maxmem += hugetlb_total_pages() * PAGE_SIZE;
 
-	seq_printf(m, "MaxMem=%ld\n", maxmem);
+	seq_printf(m, "MaxMem=%lu\n", maxmem);
 }
 
 static int pseries_lparcfg_data(struct seq_file *m, void *v)
@@ -698,12 +698,12 @@ static int lparcfg_open(struct inode *inode, struct file *file)
 	return single_open(file, lparcfg_data, NULL);
 }
 
-static const struct file_operations lparcfg_fops = {
-	.read		= seq_read,
-	.write		= lparcfg_write,
-	.open		= lparcfg_open,
-	.release	= single_release,
-	.llseek		= seq_lseek,
+static const struct proc_ops lparcfg_proc_ops = {
+	.proc_read	= seq_read,
+	.proc_write	= lparcfg_write,
+	.proc_open	= lparcfg_open,
+	.proc_release	= single_release,
+	.proc_lseek	= seq_lseek,
 };
 
 static int __init lparcfg_init(void)
@@ -714,7 +714,7 @@ static int __init lparcfg_init(void)
 	if (firmware_has_feature(FW_FEATURE_SPLPAR))
 		mode |= 0200;
 
-	if (!proc_create("powerpc/lparcfg", mode, NULL, &lparcfg_fops)) {
+	if (!proc_create("powerpc/lparcfg", mode, NULL, &lparcfg_proc_ops)) {
 		printk(KERN_ERR "Failed to create powerpc/lparcfg\n");
 		return -EIO;
 	}
diff --git a/arch/powerpc/platforms/pseries/papr_scm.c b/arch/powerpc/platforms/pseries/papr_scm.c
index c2ef320ba1bf..0b4467e378e5 100644
--- a/arch/powerpc/platforms/pseries/papr_scm.c
+++ b/arch/powerpc/platforms/pseries/papr_scm.c
@@ -69,7 +69,8 @@ static int drc_pmem_bind(struct papr_scm_priv *p)
 		return rc;
 
 	p->bound_addr = saved;
-	dev_dbg(&p->pdev->dev, "bound drc 0x%x to %pR\n", p->drc_index, &p->res);
+	dev_dbg(&p->pdev->dev, "bound drc 0x%x to 0x%lx\n",
+		p->drc_index, (unsigned long)saved);
 	return rc;
 }
 
@@ -133,7 +134,7 @@ static int drc_pmem_query_n_bind(struct papr_scm_priv *p)
 		goto err_out;
 
 	p->bound_addr = start_addr;
-	dev_dbg(&p->pdev->dev, "bound drc 0x%x to %pR\n", p->drc_index, &p->res);
+	dev_dbg(&p->pdev->dev, "bound drc 0x%x to 0x%lx\n", p->drc_index, start_addr);
 	return rc;
 
 err_out:
@@ -322,6 +323,7 @@ static int papr_scm_nvdimm_init(struct papr_scm_priv *p)
 	p->bus = nvdimm_bus_register(NULL, &p->bus_desc);
 	if (!p->bus) {
 		dev_err(dev, "Error creating nvdimm bus %pOF\n", p->dn);
+		kfree(p->bus_desc.provider_name);
 		return -ENXIO;
 	}
 
@@ -356,7 +358,6 @@ static int papr_scm_nvdimm_init(struct papr_scm_priv *p)
 	ndr_desc.mapping = &mapping;
 	ndr_desc.num_mappings = 1;
 	ndr_desc.nd_set = &p->nd_set;
-	set_bit(ND_REGION_PAGEMAP, &ndr_desc.flags);
 
 	if (p->is_volatile)
 		p->region = nvdimm_volatile_region_create(p->bus, &ndr_desc);
@@ -477,6 +478,7 @@ static int papr_scm_remove(struct platform_device *pdev)
 
 	nvdimm_bus_unregister(p->bus);
 	drc_pmem_unbind(p);
+	kfree(p->bus_desc.provider_name);
 	kfree(p);
 
 	return 0;
diff --git a/arch/powerpc/platforms/pseries/pci.c b/arch/powerpc/platforms/pseries/pci.c
index 722830978639..911534b89c85 100644
--- a/arch/powerpc/platforms/pseries/pci.c
+++ b/arch/powerpc/platforms/pseries/pci.c
@@ -192,7 +192,7 @@ int pseries_pci_sriov_enable(struct pci_dev *pdev, u16 num_vfs)
 int pseries_pcibios_sriov_enable(struct pci_dev *pdev, u16 num_vfs)
 {
 	/* Allocate PCI data */
-	add_dev_pci_data(pdev);
+	add_sriov_vf_pdns(pdev);
 	return pseries_pci_sriov_enable(pdev, num_vfs);
 }
 
@@ -204,7 +204,7 @@ int pseries_pcibios_sriov_disable(struct pci_dev *pdev)
 	/* Releasing pe_num_map */
 	kfree(pdn->pe_num_map);
 	/* Release PCI data */
-	remove_dev_pci_data(pdev);
+	remove_sriov_vf_pdns(pdev);
 	pci_vf_drivers_autoprobe(pdev, true);
 	return 0;
 }
diff --git a/arch/powerpc/platforms/pseries/reconfig.c b/arch/powerpc/platforms/pseries/reconfig.c
index 8a9c4fb95b8b..7f7369fec46b 100644
--- a/arch/powerpc/platforms/pseries/reconfig.c
+++ b/arch/powerpc/platforms/pseries/reconfig.c
@@ -391,9 +391,9 @@ out:
 	return rv ? rv : count;
 }
 
-static const struct file_operations ofdt_fops = {
-	.write = ofdt_write,
-	.llseek = noop_llseek,
+static const struct proc_ops ofdt_proc_ops = {
+	.proc_write	= ofdt_write,
+	.proc_lseek	= noop_llseek,
 };
 
 /* create /proc/powerpc/ofdt write-only by root */
@@ -401,7 +401,7 @@ static int proc_ppc64_create_ofdt(void)
 {
 	struct proc_dir_entry *ent;
 
-	ent = proc_create("powerpc/ofdt", 0200, NULL, &ofdt_fops);
+	ent = proc_create("powerpc/ofdt", 0200, NULL, &ofdt_proc_ops);
 	if (ent)
 		proc_set_size(ent, 0);
 
diff --git a/arch/powerpc/platforms/pseries/scanlog.c b/arch/powerpc/platforms/pseries/scanlog.c
index a0001280503c..2879c4f0ceb7 100644
--- a/arch/powerpc/platforms/pseries/scanlog.c
+++ b/arch/powerpc/platforms/pseries/scanlog.c
@@ -152,13 +152,12 @@ static int scanlog_release(struct inode * inode, struct file * file)
 	return 0;
 }
 
-static const struct file_operations scanlog_fops = {
-	.owner		= THIS_MODULE,
-	.read		= scanlog_read,
-	.write		= scanlog_write,
-	.open		= scanlog_open,
-	.release	= scanlog_release,
-	.llseek		= noop_llseek,
+static const struct proc_ops scanlog_proc_ops = {
+	.proc_read	= scanlog_read,
+	.proc_write	= scanlog_write,
+	.proc_open	= scanlog_open,
+	.proc_release	= scanlog_release,
+	.proc_lseek	= noop_llseek,
 };
 
 static int __init scanlog_init(void)
@@ -176,7 +175,7 @@ static int __init scanlog_init(void)
 		goto err;
 
 	ent = proc_create("powerpc/rtas/scan-log-dump", 0400, NULL,
-			  &scanlog_fops);
+			  &scanlog_proc_ops);
 	if (!ent)
 		goto err;
 	return 0;
diff --git a/arch/powerpc/platforms/pseries/vio.c b/arch/powerpc/platforms/pseries/vio.c
index 79e2287991db..f682b7babc09 100644
--- a/arch/powerpc/platforms/pseries/vio.c
+++ b/arch/powerpc/platforms/pseries/vio.c
@@ -1176,6 +1176,8 @@ static struct iommu_table *vio_build_iommu_table(struct vio_dev *dev)
 	if (tbl == NULL)
 		return NULL;
 
+	kref_init(&tbl->it_kref);
+
 	of_parse_dma_window(dev->dev.of_node, dma_window,
 			    &tbl->it_index, &offset, &size);
 
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index 617a443d673d..4a8874bc1057 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -1065,13 +1065,11 @@ int fsl_pci_mcheck_exception(struct pt_regs *regs)
 	addr += mfspr(SPRN_MCAR);
 
 	if (is_in_pci_mem_space(addr)) {
-		if (user_mode(regs)) {
-			pagefault_disable();
-			ret = get_user(inst, (__u32 __user *)regs->nip);
-			pagefault_enable();
-		} else {
+		if (user_mode(regs))
+			ret = probe_user_read(&inst, (void __user *)regs->nip,
+					      sizeof(inst));
+		else
 			ret = probe_kernel_address((void *)regs->nip, inst);
-		}
 
 		if (!ret && mcheck_handle_load(regs, inst)) {
 			regs->nip += 4;
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 934a77324f6b..a3a72b780e67 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -964,7 +964,7 @@ static struct irq_chip mpic_irq_chip = {
 };
 
 #ifdef CONFIG_SMP
-static struct irq_chip mpic_ipi_chip = {
+static const struct irq_chip mpic_ipi_chip = {
 	.irq_mask	= mpic_mask_ipi,
 	.irq_unmask	= mpic_unmask_ipi,
 	.irq_eoi	= mpic_end_ipi,
@@ -978,7 +978,7 @@ static struct irq_chip mpic_tm_chip = {
 };
 
 #ifdef CONFIG_MPIC_U3_HT_IRQS
-static struct irq_chip mpic_irq_ht_chip = {
+static const struct irq_chip mpic_irq_ht_chip = {
 	.irq_startup	= mpic_startup_ht_irq,
 	.irq_shutdown	= mpic_shutdown_ht_irq,
 	.irq_mask	= mpic_mask_irq,
diff --git a/arch/powerpc/tools/relocs_check.sh b/arch/powerpc/tools/relocs_check.sh
index 7b9fe0a567cf..014e00e74d2b 100755
--- a/arch/powerpc/tools/relocs_check.sh
+++ b/arch/powerpc/tools/relocs_check.sh
@@ -10,14 +10,21 @@
 # based on relocs_check.pl
 # Copyright © 2009 IBM Corporation
 
-if [ $# -lt 2 ]; then
-	echo "$0 [path to objdump] [path to vmlinux]" 1>&2
+if [ $# -lt 3 ]; then
+	echo "$0 [path to objdump] [path to nm] [path to vmlinux]" 1>&2
 	exit 1
 fi
 
-# Have Kbuild supply the path to objdump so we handle cross compilation.
+# Have Kbuild supply the path to objdump and nm so we handle cross compilation.
 objdump="$1"
-vmlinux="$2"
+nm="$2"
+vmlinux="$3"
+
+# Remove from the bad relocations those that match an undefined weak symbol
+# which will result in an absolute relocation to 0.
+# Weak unresolved symbols are of that form in nm output:
+# "                  w _binary__btf_vmlinux_bin_end"
+undef_weak_symbols=$($nm "$vmlinux" | awk '$1 ~ /w/ { print $2 }')
 
 bad_relocs=$(
 $objdump -R "$vmlinux" |
@@ -26,8 +33,6 @@ $objdump -R "$vmlinux" |
 	# These relocations are okay
 	# On PPC64:
 	#	R_PPC64_RELATIVE, R_PPC64_NONE
-	#	R_PPC64_ADDR64 mach_<name>
-	#	R_PPC64_ADDR64 __crc_<name>
 	# On PPC:
 	#	R_PPC_RELATIVE, R_PPC_ADDR16_HI,
 	#	R_PPC_ADDR16_HA,R_PPC_ADDR16_LO,
@@ -39,8 +44,7 @@ R_PPC_ADDR16_HI
 R_PPC_ADDR16_HA
 R_PPC_RELATIVE
 R_PPC_NONE' |
-	grep -E -v '\<R_PPC64_ADDR64[[:space:]]+mach_' |
-	grep -E -v '\<R_PPC64_ADDR64[[:space:]]+__crc_'
+	([ "$undef_weak_symbols" ] && grep -F -w -v "$undef_weak_symbols" || cat)
 )
 
 if [ -z "$bad_relocs" ]; then
diff --git a/arch/powerpc/xmon/dis-asm.h b/arch/powerpc/xmon/dis-asm.h
index c4d246ebca37..c4c982d6402e 100644
--- a/arch/powerpc/xmon/dis-asm.h
+++ b/arch/powerpc/xmon/dis-asm.h
@@ -13,13 +13,13 @@ extern int print_insn_spu(unsigned long insn, unsigned long memaddr);
 #else
 static inline int print_insn_powerpc(unsigned long insn, unsigned long memaddr)
 {
-	printf("%.8x", insn);
+	printf("%.8lx", insn);
 	return 0;
 }
 
 static inline int print_insn_spu(unsigned long insn, unsigned long memaddr)
 {
-	printf("%.8x", insn);
+	printf("%.8lx", insn);
 	return 0;
 }
 #endif
diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index a7056049709e..e8c84d265602 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -1192,16 +1192,19 @@ static int do_step(struct pt_regs *regs)
 
 static void bootcmds(void)
 {
+	char tmp[64];
 	int cmd;
 
 	cmd = inchar();
-	if (cmd == 'r')
-		ppc_md.restart(NULL);
-	else if (cmd == 'h')
+	if (cmd == 'r') {
+		getstring(tmp, 64);
+		ppc_md.restart(tmp);
+	} else if (cmd == 'h') {
 		ppc_md.halt();
-	else if (cmd == 'p')
+	} else if (cmd == 'p') {
 		if (pm_power_off)
 			pm_power_off();
+	}
 }
 
 static int cpu_cmd(void)
@@ -1949,15 +1952,14 @@ static void dump_300_sprs(void)
 
 	printf("pidr   = %.16lx  tidr  = %.16lx\n",
 		mfspr(SPRN_PID), mfspr(SPRN_TIDR));
-	printf("asdr   = %.16lx  psscr = %.16lx\n",
-		mfspr(SPRN_ASDR), hv ? mfspr(SPRN_PSSCR)
-					: mfspr(SPRN_PSSCR_PR));
+	printf("psscr  = %.16lx\n",
+		hv ? mfspr(SPRN_PSSCR) : mfspr(SPRN_PSSCR_PR));
 
 	if (!hv)
 		return;
 
-	printf("ptcr   = %.16lx\n",
-		mfspr(SPRN_PTCR));
+	printf("ptcr   = %.16lx  asdr  = %.16lx\n",
+		mfspr(SPRN_PTCR), mfspr(SPRN_ASDR));
 #endif
 }
 
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index fa7dc03459e7..73f029eae0cc 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -12,8 +12,6 @@ config 32BIT
 
 config RISCV
 	def_bool y
-	# even on 32-bit, physical (and DMA) addresses are > 32-bits
-	select PHYS_ADDR_T_64BIT
 	select OF
 	select OF_EARLY_FLATTREE
 	select OF_IRQ
@@ -57,6 +55,7 @@ config RISCV
 	select GENERIC_ARCH_TOPOLOGY if SMP
 	select ARCH_HAS_PTE_SPECIAL
 	select ARCH_HAS_MMIOWB
+	select ARCH_HAS_DEBUG_VIRTUAL
 	select HAVE_EBPF_JIT if 64BIT
 	select EDAC_SUPPORT
 	select ARCH_HAS_GIGANTIC_PAGE
@@ -66,6 +65,7 @@ config RISCV
 	select HAVE_ARCH_MMAP_RND_BITS if MMU
 	select ARCH_HAS_GCOV_PROFILE_ALL
 	select HAVE_COPY_THREAD_TLS
+	select HAVE_ARCH_KASAN if MMU && 64BIT
 
 config ARCH_MMAP_RND_BITS_MIN
 	default 18 if 64BIT
diff --git a/arch/riscv/boot/dts/sifive/fu540-c000.dtsi b/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
index a2e3d54e830c..7db861053483 100644
--- a/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
+++ b/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
@@ -268,6 +268,19 @@
 			interrupts = <1 2 3>;
 			reg = <0x0 0x2010000 0x0 0x1000>;
 		};
-
+		gpio: gpio@10060000 {
+			compatible = "sifive,fu540-c000-gpio", "sifive,gpio0";
+			interrupt-parent = <&plic0>;
+			interrupts = <7>, <8>, <9>, <10>, <11>, <12>, <13>,
+				     <14>, <15>, <16>, <17>, <18>, <19>, <20>,
+				     <21>, <22>;
+			reg = <0x0 0x10060000 0x0 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&prci PRCI_CLK_TLCLK>;
+			status = "disabled";
+		};
 	};
 };
diff --git a/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts b/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts
index 88cfcb96bf23..609198cb1163 100644
--- a/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts
+++ b/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts
@@ -94,3 +94,7 @@
 &pwm1 {
 	status = "okay";
 };
+
+&gpio {
+	status = "okay";
+};
diff --git a/arch/riscv/include/asm/Kbuild b/arch/riscv/include/asm/Kbuild
index 1efaeddf1e4b..ec0ca8c6ab64 100644
--- a/arch/riscv/include/asm/Kbuild
+++ b/arch/riscv/include/asm/Kbuild
@@ -7,7 +7,6 @@ generic-y += div64.h
 generic-y += extable.h
 generic-y += flat.h
 generic-y += dma.h
-generic-y += dma-contiguous.h
 generic-y += dma-mapping.h
 generic-y += emergency-restart.h
 generic-y += exec.h
diff --git a/arch/riscv/include/asm/image.h b/arch/riscv/include/asm/image.h
index 7b0f92ba0acc..e0b319af3681 100644
--- a/arch/riscv/include/asm/image.h
+++ b/arch/riscv/include/asm/image.h
@@ -42,7 +42,7 @@
  * @res2:		reserved
  * @magic:		Magic number (RISC-V specific; deprecated)
  * @magic2:		Magic number 2 (to match the ARM64 'magic' field pos)
- * @res4:		reserved (will be used for PE COFF offset)
+ * @res3:		reserved (will be used for PE COFF offset)
  *
  * The intention is for this header format to be shared between multiple
  * architectures to avoid a proliferation of image header formats.
@@ -59,7 +59,7 @@ struct riscv_image_header {
 	u64 res2;
 	u64 magic;
 	u32 magic2;
-	u32 res4;
+	u32 res3;
 };
 #endif /* __ASSEMBLY__ */
 #endif /* _ASM_RISCV_IMAGE_H */
diff --git a/arch/riscv/include/asm/kasan.h b/arch/riscv/include/asm/kasan.h
new file mode 100644
index 000000000000..eee6e6588b12
--- /dev/null
+++ b/arch/riscv/include/asm/kasan.h
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (C) 2019 Andes Technology Corporation */
+
+#ifndef __ASM_KASAN_H
+#define __ASM_KASAN_H
+
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_KASAN
+
+#include <asm/pgtable.h>
+
+#define KASAN_SHADOW_SCALE_SHIFT	3
+
+#define KASAN_SHADOW_SIZE	(UL(1) << (38 - KASAN_SHADOW_SCALE_SHIFT))
+#define KASAN_SHADOW_START	0xffffffc000000000 /* 2^64 - 2^38 */
+#define KASAN_SHADOW_END	(KASAN_SHADOW_START + KASAN_SHADOW_SIZE)
+
+#define KASAN_SHADOW_OFFSET	(KASAN_SHADOW_END - (1ULL << \
+					(64 - KASAN_SHADOW_SCALE_SHIFT)))
+
+void kasan_init(void);
+asmlinkage void kasan_early_init(void);
+
+#endif
+#endif
+#endif /* __ASM_KASAN_H */
diff --git a/arch/riscv/include/asm/page.h b/arch/riscv/include/asm/page.h
index ac699246ae7e..8ca1930caa44 100644
--- a/arch/riscv/include/asm/page.h
+++ b/arch/riscv/include/asm/page.h
@@ -100,8 +100,20 @@ extern unsigned long pfn_base;
 extern unsigned long max_low_pfn;
 extern unsigned long min_low_pfn;
 
-#define __pa(x)		((unsigned long)(x) - va_pa_offset)
-#define __va(x)		((void *)((unsigned long) (x) + va_pa_offset))
+#define __pa_to_va_nodebug(x)	((void *)((unsigned long) (x) + va_pa_offset))
+#define __va_to_pa_nodebug(x)	((unsigned long)(x) - va_pa_offset)
+
+#ifdef CONFIG_DEBUG_VIRTUAL
+extern phys_addr_t __virt_to_phys(unsigned long x);
+extern phys_addr_t __phys_addr_symbol(unsigned long x);
+#else
+#define __virt_to_phys(x)	__va_to_pa_nodebug(x)
+#define __phys_addr_symbol(x)	__va_to_pa_nodebug(x)
+#endif /* CONFIG_DEBUG_VIRTUAL */
+
+#define __pa_symbol(x)	__phys_addr_symbol(RELOC_HIDE((unsigned long)(x), 0))
+#define __pa(x)		__virt_to_phys((unsigned long)(x))
+#define __va(x)		((void *)__pa_to_va_nodebug((phys_addr_t)(x)))
 
 #define phys_to_pfn(phys)	(PFN_DOWN(phys))
 #define pfn_to_phys(pfn)	(PFN_PHYS(pfn))
diff --git a/arch/riscv/include/asm/pgtable-64.h b/arch/riscv/include/asm/pgtable-64.h
index 74630989006d..b15f70a1fdfa 100644
--- a/arch/riscv/include/asm/pgtable-64.h
+++ b/arch/riscv/include/asm/pgtable-64.h
@@ -43,6 +43,13 @@ static inline int pud_bad(pud_t pud)
 	return !pud_present(pud);
 }
 
+#define pud_leaf	pud_leaf
+static inline int pud_leaf(pud_t pud)
+{
+	return pud_present(pud) &&
+	       (pud_val(pud) & (_PAGE_READ | _PAGE_WRITE | _PAGE_EXEC));
+}
+
 static inline void set_pud(pud_t *pudp, pud_t pud)
 {
 	*pudp = pud;
@@ -58,6 +65,11 @@ static inline unsigned long pud_page_vaddr(pud_t pud)
 	return (unsigned long)pfn_to_virt(pud_val(pud) >> _PAGE_PFN_SHIFT);
 }
 
+static inline struct page *pud_page(pud_t pud)
+{
+	return pfn_to_page(pud_val(pud) >> _PAGE_PFN_SHIFT);
+}
+
 #define pmd_index(addr) (((addr) >> PMD_SHIFT) & (PTRS_PER_PMD - 1))
 
 static inline pmd_t *pmd_offset(pud_t *pud, unsigned long addr)
diff --git a/arch/riscv/include/asm/pgtable.h b/arch/riscv/include/asm/pgtable.h
index f66b87314fa2..e43041519edd 100644
--- a/arch/riscv/include/asm/pgtable.h
+++ b/arch/riscv/include/asm/pgtable.h
@@ -130,6 +130,13 @@ static inline int pmd_bad(pmd_t pmd)
 	return !pmd_present(pmd);
 }
 
+#define pmd_leaf	pmd_leaf
+static inline int pmd_leaf(pmd_t pmd)
+{
+	return pmd_present(pmd) &&
+	       (pmd_val(pmd) & (_PAGE_READ | _PAGE_WRITE | _PAGE_EXEC));
+}
+
 static inline void set_pmd(pmd_t *pmdp, pmd_t pmd)
 {
 	*pmdp = pmd;
diff --git a/arch/riscv/include/asm/string.h b/arch/riscv/include/asm/string.h
index 1b5d44585962..924af13f8555 100644
--- a/arch/riscv/include/asm/string.h
+++ b/arch/riscv/include/asm/string.h
@@ -11,8 +11,17 @@
 
 #define __HAVE_ARCH_MEMSET
 extern asmlinkage void *memset(void *, int, size_t);
+extern asmlinkage void *__memset(void *, int, size_t);
 
 #define __HAVE_ARCH_MEMCPY
 extern asmlinkage void *memcpy(void *, const void *, size_t);
+extern asmlinkage void *__memcpy(void *, const void *, size_t);
 
+/* For those files which don't want to check by kasan. */
+#if defined(CONFIG_KASAN) && !defined(__SANITIZE_ADDRESS__)
+
+#define memcpy(dst, src, len) __memcpy(dst, src, len)
+#define memset(s, c, n) __memset(s, c, n)
+
+#endif
 #endif /* _ASM_RISCV_STRING_H */
diff --git a/arch/riscv/kernel/head.S b/arch/riscv/kernel/head.S
index a4242be66966..271860fc2c3f 100644
--- a/arch/riscv/kernel/head.S
+++ b/arch/riscv/kernel/head.S
@@ -121,6 +121,9 @@ clear_bss_done:
 	sw zero, TASK_TI_CPU(tp)
 	la sp, init_thread_union + THREAD_SIZE
 
+#ifdef CONFIG_KASAN
+	call kasan_early_init
+#endif
 	/* Start the kernel */
 	call parse_dtb
 	tail start_kernel
diff --git a/arch/riscv/kernel/riscv_ksyms.c b/arch/riscv/kernel/riscv_ksyms.c
index 2a02b7eebee0..450492e1cb4e 100644
--- a/arch/riscv/kernel/riscv_ksyms.c
+++ b/arch/riscv/kernel/riscv_ksyms.c
@@ -11,3 +11,5 @@
  */
 EXPORT_SYMBOL(memset);
 EXPORT_SYMBOL(memcpy);
+EXPORT_SYMBOL(__memset);
+EXPORT_SYMBOL(__memcpy);
diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
index 365ff8420bfe..0a6d415b0a5a 100644
--- a/arch/riscv/kernel/setup.c
+++ b/arch/riscv/kernel/setup.c
@@ -24,6 +24,7 @@
 #include <asm/smp.h>
 #include <asm/tlbflush.h>
 #include <asm/thread_info.h>
+#include <asm/kasan.h>
 
 #include "head.h"
 
@@ -74,12 +75,12 @@ void __init setup_arch(char **cmdline_p)
 	swiotlb_init(1);
 #endif
 
-#ifdef CONFIG_SMP
-	setup_smp();
+#ifdef CONFIG_KASAN
+	kasan_init();
 #endif
 
-#ifdef CONFIG_DUMMY_CONSOLE
-	conswitchp = &dummy_con;
+#ifdef CONFIG_SMP
+	setup_smp();
 #endif
 
 	riscv_fill_hwcap();
diff --git a/arch/riscv/kernel/vmlinux.lds.S b/arch/riscv/kernel/vmlinux.lds.S
index 12f42f96d46e..1e0193ded420 100644
--- a/arch/riscv/kernel/vmlinux.lds.S
+++ b/arch/riscv/kernel/vmlinux.lds.S
@@ -46,6 +46,7 @@ SECTIONS
 		KPROBES_TEXT
 		ENTRY_TEXT
 		IRQENTRY_TEXT
+		SOFTIRQENTRY_TEXT
 		*(.fixup)
 		_etext = .;
 	}
diff --git a/arch/riscv/lib/memcpy.S b/arch/riscv/lib/memcpy.S
index b4c477846e91..51ab716253fa 100644
--- a/arch/riscv/lib/memcpy.S
+++ b/arch/riscv/lib/memcpy.S
@@ -7,7 +7,8 @@
 #include <asm/asm.h>
 
 /* void *memcpy(void *, const void *, size_t) */
-ENTRY(memcpy)
+ENTRY(__memcpy)
+WEAK(memcpy)
 	move t6, a0  /* Preserve return value */
 
 	/* Defer to byte-oriented copy for small sizes */
@@ -104,4 +105,4 @@ ENTRY(memcpy)
 	bltu a1, a3, 5b
 6:
 	ret
-END(memcpy)
+END(__memcpy)
diff --git a/arch/riscv/lib/memset.S b/arch/riscv/lib/memset.S
index 5a7386b47175..34c5360c6705 100644
--- a/arch/riscv/lib/memset.S
+++ b/arch/riscv/lib/memset.S
@@ -8,7 +8,8 @@
 #include <asm/asm.h>
 
 /* void *memset(void *, int, size_t) */
-ENTRY(memset)
+ENTRY(__memset)
+WEAK(memset)
 	move t0, a0  /* Preserve return value */
 
 	/* Defer to byte-oriented fill for small sizes */
@@ -109,4 +110,4 @@ ENTRY(memset)
 	bltu t0, a3, 5b
 6:
 	ret
-END(memset)
+END(__memset)
diff --git a/arch/riscv/mm/Makefile b/arch/riscv/mm/Makefile
index a1bd95c8047a..50b7af58c566 100644
--- a/arch/riscv/mm/Makefile
+++ b/arch/riscv/mm/Makefile
@@ -15,3 +15,11 @@ ifeq ($(CONFIG_MMU),y)
 obj-$(CONFIG_SMP) += tlbflush.o
 endif
 obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
+obj-$(CONFIG_KASAN)   += kasan_init.o
+
+ifdef CONFIG_KASAN
+KASAN_SANITIZE_kasan_init.o := n
+KASAN_SANITIZE_init.o := n
+endif
+
+obj-$(CONFIG_DEBUG_VIRTUAL) += physaddr.o
diff --git a/arch/riscv/mm/kasan_init.c b/arch/riscv/mm/kasan_init.c
new file mode 100644
index 000000000000..f0cc86040587
--- /dev/null
+++ b/arch/riscv/mm/kasan_init.c
@@ -0,0 +1,104 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) 2019 Andes Technology Corporation
+
+#include <linux/pfn.h>
+#include <linux/init_task.h>
+#include <linux/kasan.h>
+#include <linux/kernel.h>
+#include <linux/memblock.h>
+#include <asm/tlbflush.h>
+#include <asm/pgtable.h>
+#include <asm/fixmap.h>
+
+extern pgd_t early_pg_dir[PTRS_PER_PGD];
+asmlinkage void __init kasan_early_init(void)
+{
+	uintptr_t i;
+	pgd_t *pgd = early_pg_dir + pgd_index(KASAN_SHADOW_START);
+
+	for (i = 0; i < PTRS_PER_PTE; ++i)
+		set_pte(kasan_early_shadow_pte + i,
+			mk_pte(virt_to_page(kasan_early_shadow_page),
+			PAGE_KERNEL));
+
+	for (i = 0; i < PTRS_PER_PMD; ++i)
+		set_pmd(kasan_early_shadow_pmd + i,
+		 pfn_pmd(PFN_DOWN(__pa((uintptr_t)kasan_early_shadow_pte)),
+			__pgprot(_PAGE_TABLE)));
+
+	for (i = KASAN_SHADOW_START; i < KASAN_SHADOW_END;
+	     i += PGDIR_SIZE, ++pgd)
+		set_pgd(pgd,
+		 pfn_pgd(PFN_DOWN(__pa(((uintptr_t)kasan_early_shadow_pmd))),
+			__pgprot(_PAGE_TABLE)));
+
+	/* init for swapper_pg_dir */
+	pgd = pgd_offset_k(KASAN_SHADOW_START);
+
+	for (i = KASAN_SHADOW_START; i < KASAN_SHADOW_END;
+	     i += PGDIR_SIZE, ++pgd)
+		set_pgd(pgd,
+		 pfn_pgd(PFN_DOWN(__pa(((uintptr_t)kasan_early_shadow_pmd))),
+			__pgprot(_PAGE_TABLE)));
+
+	flush_tlb_all();
+}
+
+static void __init populate(void *start, void *end)
+{
+	unsigned long i;
+	unsigned long vaddr = (unsigned long)start & PAGE_MASK;
+	unsigned long vend = PAGE_ALIGN((unsigned long)end);
+	unsigned long n_pages = (vend - vaddr) / PAGE_SIZE;
+	unsigned long n_pmds =
+		(n_pages % PTRS_PER_PTE) ? n_pages / PTRS_PER_PTE + 1 :
+						n_pages / PTRS_PER_PTE;
+	pgd_t *pgd = pgd_offset_k(vaddr);
+	pmd_t *pmd = memblock_alloc(n_pmds * sizeof(pmd_t), PAGE_SIZE);
+	pte_t *pte = memblock_alloc(n_pages * sizeof(pte_t), PAGE_SIZE);
+
+	for (i = 0; i < n_pages; i++) {
+		phys_addr_t phys = memblock_phys_alloc(PAGE_SIZE, PAGE_SIZE);
+
+		set_pte(pte + i, pfn_pte(PHYS_PFN(phys), PAGE_KERNEL));
+	}
+
+	for (i = 0; i < n_pmds; ++pgd, i += PTRS_PER_PMD)
+		set_pgd(pgd, pfn_pgd(PFN_DOWN(__pa(((uintptr_t)(pmd + i)))),
+				__pgprot(_PAGE_TABLE)));
+
+	for (i = 0; i < n_pages; ++pmd, i += PTRS_PER_PTE)
+		set_pmd(pmd, pfn_pmd(PFN_DOWN(__pa((uintptr_t)(pte + i))),
+				__pgprot(_PAGE_TABLE)));
+
+	flush_tlb_all();
+	memset(start, 0, end - start);
+}
+
+void __init kasan_init(void)
+{
+	struct memblock_region *reg;
+	unsigned long i;
+
+	kasan_populate_early_shadow((void *)KASAN_SHADOW_START,
+			(void *)kasan_mem_to_shadow((void *)VMALLOC_END));
+
+	for_each_memblock(memory, reg) {
+		void *start = (void *)__va(reg->base);
+		void *end = (void *)__va(reg->base + reg->size);
+
+		if (start >= end)
+			break;
+
+		populate(kasan_mem_to_shadow(start),
+			 kasan_mem_to_shadow(end));
+	};
+
+	for (i = 0; i < PTRS_PER_PTE; i++)
+		set_pte(&kasan_early_shadow_pte[i],
+			mk_pte(virt_to_page(kasan_early_shadow_page),
+			__pgprot(_PAGE_PRESENT | _PAGE_READ | _PAGE_ACCESSED)));
+
+	memset(kasan_early_shadow_page, 0, PAGE_SIZE);
+	init_task.kasan_depth = 0;
+}
diff --git a/arch/riscv/mm/physaddr.c b/arch/riscv/mm/physaddr.c
new file mode 100644
index 000000000000..e8e4dcd39fed
--- /dev/null
+++ b/arch/riscv/mm/physaddr.c
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/types.h>
+#include <linux/mmdebug.h>
+#include <linux/mm.h>
+#include <asm/page.h>
+#include <asm/sections.h>
+
+phys_addr_t __virt_to_phys(unsigned long x)
+{
+	phys_addr_t y = x - PAGE_OFFSET;
+
+	/*
+	 * Boundary checking aginst the kernel linear mapping space.
+	 */
+	WARN(y >= KERN_VIRT_SIZE,
+	     "virt_to_phys used for non-linear address: %pK (%pS)\n",
+	     (void *)x, (void *)x);
+
+	return __va_to_pa_nodebug(x);
+}
+EXPORT_SYMBOL(__virt_to_phys);
+
+phys_addr_t __phys_addr_symbol(unsigned long x)
+{
+	unsigned long kernel_start = (unsigned long)PAGE_OFFSET;
+	unsigned long kernel_end = (unsigned long)_end;
+
+	/*
+	 * Boundary checking aginst the kernel image mapping.
+	 * __pa_symbol should only be used on kernel symbol addresses.
+	 */
+	VIRTUAL_BUG_ON(x < kernel_start || x > kernel_end);
+
+	return __va_to_pa_nodebug(x);
+}
+EXPORT_SYMBOL(__phys_addr_symbol);
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 287714d51b47..8abe77536d9d 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -156,6 +156,7 @@ config S390
 	select HAVE_KERNEL_UNCOMPRESSED
 	select HAVE_KERNEL_XZ
 	select HAVE_KPROBES
+	select HAVE_KPROBES_ON_FTRACE
 	select HAVE_KRETPROBES
 	select HAVE_KVM
 	select HAVE_LIVEPATCH
@@ -163,13 +164,13 @@ config S390
 	select HAVE_PERF_USER_STACK_DUMP
 	select HAVE_MEMBLOCK_NODE_MAP
 	select HAVE_MEMBLOCK_PHYS_MAP
-	select HAVE_MMU_GATHER_NO_GATHER
+	select MMU_GATHER_NO_GATHER
 	select HAVE_MOD_ARCH_SPECIFIC
 	select HAVE_NOP_MCOUNT
 	select HAVE_OPROFILE
 	select HAVE_PCI
 	select HAVE_PERF_EVENTS
-	select HAVE_RCU_TABLE_FREE
+	select MMU_GATHER_RCU_TABLE_FREE
 	select HAVE_REGS_AND_STACK_ACCESS_API
 	select HAVE_RELIABLE_STACKTRACE
 	select HAVE_RSEQ
diff --git a/arch/s390/boot/compressed/decompressor.c b/arch/s390/boot/compressed/decompressor.c
index 45046630c56a..368fd372c875 100644
--- a/arch/s390/boot/compressed/decompressor.c
+++ b/arch/s390/boot/compressed/decompressor.c
@@ -30,13 +30,13 @@ extern unsigned char _compressed_start[];
 extern unsigned char _compressed_end[];
 
 #ifdef CONFIG_HAVE_KERNEL_BZIP2
-#define HEAP_SIZE	0x400000
+#define BOOT_HEAP_SIZE	0x400000
 #else
-#define HEAP_SIZE	0x10000
+#define BOOT_HEAP_SIZE	0x10000
 #endif
 
 static unsigned long free_mem_ptr = (unsigned long) _end;
-static unsigned long free_mem_end_ptr = (unsigned long) _end + HEAP_SIZE;
+static unsigned long free_mem_end_ptr = (unsigned long) _end + BOOT_HEAP_SIZE;
 
 #ifdef CONFIG_KERNEL_GZIP
 #include "../../../../lib/decompress_inflate.c"
@@ -62,7 +62,7 @@ static unsigned long free_mem_end_ptr = (unsigned long) _end + HEAP_SIZE;
 #include "../../../../lib/decompress_unxz.c"
 #endif
 
-#define decompress_offset ALIGN((unsigned long)_end + HEAP_SIZE, PAGE_SIZE)
+#define decompress_offset ALIGN((unsigned long)_end + BOOT_HEAP_SIZE, PAGE_SIZE)
 
 unsigned long mem_safe_offset(void)
 {
diff --git a/arch/s390/boot/ipl_parm.c b/arch/s390/boot/ipl_parm.c
index 24ef67eb1cef..357adad991d2 100644
--- a/arch/s390/boot/ipl_parm.c
+++ b/arch/s390/boot/ipl_parm.c
@@ -14,6 +14,7 @@
 char __bootdata(early_command_line)[COMMAND_LINE_SIZE];
 struct ipl_parameter_block __bootdata_preserved(ipl_block);
 int __bootdata_preserved(ipl_block_valid);
+unsigned int __bootdata_preserved(zlib_dfltcc_support) = ZLIB_DFLTCC_FULL;
 
 unsigned long __bootdata(vmalloc_size) = VMALLOC_DEFAULT_SIZE;
 unsigned long __bootdata(memory_end);
@@ -229,6 +230,19 @@ void parse_boot_command_line(void)
 		if (!strcmp(param, "vmalloc") && val)
 			vmalloc_size = round_up(memparse(val, NULL), PAGE_SIZE);
 
+		if (!strcmp(param, "dfltcc")) {
+			if (!strcmp(val, "off"))
+				zlib_dfltcc_support = ZLIB_DFLTCC_DISABLED;
+			else if (!strcmp(val, "on"))
+				zlib_dfltcc_support = ZLIB_DFLTCC_FULL;
+			else if (!strcmp(val, "def_only"))
+				zlib_dfltcc_support = ZLIB_DFLTCC_DEFLATE_ONLY;
+			else if (!strcmp(val, "inf_only"))
+				zlib_dfltcc_support = ZLIB_DFLTCC_INFLATE_ONLY;
+			else if (!strcmp(val, "always"))
+				zlib_dfltcc_support = ZLIB_DFLTCC_FULL_DEBUG;
+		}
+
 		if (!strcmp(param, "noexec")) {
 			rc = kstrtobool(val, &enabled);
 			if (!rc && !enabled)
diff --git a/arch/s390/crypto/paes_s390.c b/arch/s390/crypto/paes_s390.c
index e2a85783f804..f3caeb17c85b 100644
--- a/arch/s390/crypto/paes_s390.c
+++ b/arch/s390/crypto/paes_s390.c
@@ -5,7 +5,7 @@
  * s390 implementation of the AES Cipher Algorithm with protected keys.
  *
  * s390 Version:
- *   Copyright IBM Corp. 2017,2019
+ *   Copyright IBM Corp. 2017,2020
  *   Author(s): Martin Schwidefsky <schwidefsky@de.ibm.com>
  *		Harald Freudenberger <freude@de.ibm.com>
  */
@@ -20,6 +20,7 @@
 #include <linux/module.h>
 #include <linux/cpufeature.h>
 #include <linux/init.h>
+#include <linux/mutex.h>
 #include <linux/spinlock.h>
 #include <crypto/internal/skcipher.h>
 #include <crypto/xts.h>
@@ -32,11 +33,11 @@
  * is called. As paes can handle different kinds of key blobs
  * and padding is also possible, the limits need to be generous.
  */
-#define PAES_MIN_KEYSIZE 64
-#define PAES_MAX_KEYSIZE 256
+#define PAES_MIN_KEYSIZE 16
+#define PAES_MAX_KEYSIZE 320
 
 static u8 *ctrblk;
-static DEFINE_SPINLOCK(ctrblk_lock);
+static DEFINE_MUTEX(ctrblk_lock);
 
 static cpacf_mask_t km_functions, kmc_functions, kmctr_functions;
 
@@ -53,19 +54,46 @@ struct key_blob {
 	unsigned int keylen;
 };
 
-static inline int _copy_key_to_kb(struct key_blob *kb,
-				  const u8 *key,
-				  unsigned int keylen)
-{
-	if (keylen <= sizeof(kb->keybuf))
+static inline int _key_to_kb(struct key_blob *kb,
+			     const u8 *key,
+			     unsigned int keylen)
+{
+	struct clearkey_header {
+		u8  type;
+		u8  res0[3];
+		u8  version;
+		u8  res1[3];
+		u32 keytype;
+		u32 len;
+	} __packed * h;
+
+	switch (keylen) {
+	case 16:
+	case 24:
+	case 32:
+		/* clear key value, prepare pkey clear key token in keybuf */
+		memset(kb->keybuf, 0, sizeof(kb->keybuf));
+		h = (struct clearkey_header *) kb->keybuf;
+		h->version = 0x02; /* TOKVER_CLEAR_KEY */
+		h->keytype = (keylen - 8) >> 3;
+		h->len = keylen;
+		memcpy(kb->keybuf + sizeof(*h), key, keylen);
+		kb->keylen = sizeof(*h) + keylen;
 		kb->key = kb->keybuf;
-	else {
-		kb->key = kmalloc(keylen, GFP_KERNEL);
-		if (!kb->key)
-			return -ENOMEM;
+		break;
+	default:
+		/* other key material, let pkey handle this */
+		if (keylen <= sizeof(kb->keybuf))
+			kb->key = kb->keybuf;
+		else {
+			kb->key = kmalloc(keylen, GFP_KERNEL);
+			if (!kb->key)
+				return -ENOMEM;
+		}
+		memcpy(kb->key, key, keylen);
+		kb->keylen = keylen;
+		break;
 	}
-	memcpy(kb->key, key, keylen);
-	kb->keylen = keylen;
 
 	return 0;
 }
@@ -82,16 +110,18 @@ static inline void _free_kb_keybuf(struct key_blob *kb)
 struct s390_paes_ctx {
 	struct key_blob kb;
 	struct pkey_protkey pk;
+	spinlock_t pk_lock;
 	unsigned long fc;
 };
 
 struct s390_pxts_ctx {
 	struct key_blob kb[2];
 	struct pkey_protkey pk[2];
+	spinlock_t pk_lock;
 	unsigned long fc;
 };
 
-static inline int __paes_convert_key(struct key_blob *kb,
+static inline int __paes_keyblob2pkey(struct key_blob *kb,
 				     struct pkey_protkey *pk)
 {
 	int i, ret;
@@ -106,22 +136,18 @@ static inline int __paes_convert_key(struct key_blob *kb,
 	return ret;
 }
 
-static int __paes_set_key(struct s390_paes_ctx *ctx)
+static inline int __paes_convert_key(struct s390_paes_ctx *ctx)
 {
-	unsigned long fc;
+	struct pkey_protkey pkey;
 
-	if (__paes_convert_key(&ctx->kb, &ctx->pk))
+	if (__paes_keyblob2pkey(&ctx->kb, &pkey))
 		return -EINVAL;
 
-	/* Pick the correct function code based on the protected key type */
-	fc = (ctx->pk.type == PKEY_KEYTYPE_AES_128) ? CPACF_KM_PAES_128 :
-		(ctx->pk.type == PKEY_KEYTYPE_AES_192) ? CPACF_KM_PAES_192 :
-		(ctx->pk.type == PKEY_KEYTYPE_AES_256) ? CPACF_KM_PAES_256 : 0;
-
-	/* Check if the function code is available */
-	ctx->fc = (fc && cpacf_test_func(&km_functions, fc)) ? fc : 0;
+	spin_lock_bh(&ctx->pk_lock);
+	memcpy(&ctx->pk, &pkey, sizeof(pkey));
+	spin_unlock_bh(&ctx->pk_lock);
 
-	return ctx->fc ? 0 : -EINVAL;
+	return 0;
 }
 
 static int ecb_paes_init(struct crypto_skcipher *tfm)
@@ -129,6 +155,7 @@ static int ecb_paes_init(struct crypto_skcipher *tfm)
 	struct s390_paes_ctx *ctx = crypto_skcipher_ctx(tfm);
 
 	ctx->kb.key = NULL;
+	spin_lock_init(&ctx->pk_lock);
 
 	return 0;
 }
@@ -140,6 +167,24 @@ static void ecb_paes_exit(struct crypto_skcipher *tfm)
 	_free_kb_keybuf(&ctx->kb);
 }
 
+static inline int __ecb_paes_set_key(struct s390_paes_ctx *ctx)
+{
+	unsigned long fc;
+
+	if (__paes_convert_key(ctx))
+		return -EINVAL;
+
+	/* Pick the correct function code based on the protected key type */
+	fc = (ctx->pk.type == PKEY_KEYTYPE_AES_128) ? CPACF_KM_PAES_128 :
+		(ctx->pk.type == PKEY_KEYTYPE_AES_192) ? CPACF_KM_PAES_192 :
+		(ctx->pk.type == PKEY_KEYTYPE_AES_256) ? CPACF_KM_PAES_256 : 0;
+
+	/* Check if the function code is available */
+	ctx->fc = (fc && cpacf_test_func(&km_functions, fc)) ? fc : 0;
+
+	return ctx->fc ? 0 : -EINVAL;
+}
+
 static int ecb_paes_set_key(struct crypto_skcipher *tfm, const u8 *in_key,
 			    unsigned int key_len)
 {
@@ -147,11 +192,11 @@ static int ecb_paes_set_key(struct crypto_skcipher *tfm, const u8 *in_key,
 	struct s390_paes_ctx *ctx = crypto_skcipher_ctx(tfm);
 
 	_free_kb_keybuf(&ctx->kb);
-	rc = _copy_key_to_kb(&ctx->kb, in_key, key_len);
+	rc = _key_to_kb(&ctx->kb, in_key, key_len);
 	if (rc)
 		return rc;
 
-	return __paes_set_key(ctx);
+	return __ecb_paes_set_key(ctx);
 }
 
 static int ecb_paes_crypt(struct skcipher_request *req, unsigned long modifier)
@@ -161,18 +206,31 @@ static int ecb_paes_crypt(struct skcipher_request *req, unsigned long modifier)
 	struct skcipher_walk walk;
 	unsigned int nbytes, n, k;
 	int ret;
+	struct {
+		u8 key[MAXPROTKEYSIZE];
+	} param;
 
 	ret = skcipher_walk_virt(&walk, req, false);
+	if (ret)
+		return ret;
+
+	spin_lock_bh(&ctx->pk_lock);
+	memcpy(param.key, ctx->pk.protkey, MAXPROTKEYSIZE);
+	spin_unlock_bh(&ctx->pk_lock);
+
 	while ((nbytes = walk.nbytes) != 0) {
 		/* only use complete blocks */
 		n = nbytes & ~(AES_BLOCK_SIZE - 1);
-		k = cpacf_km(ctx->fc | modifier, ctx->pk.protkey,
+		k = cpacf_km(ctx->fc | modifier, &param,
 			     walk.dst.virt.addr, walk.src.virt.addr, n);
 		if (k)
 			ret = skcipher_walk_done(&walk, nbytes - k);
 		if (k < n) {
-			if (__paes_set_key(ctx) != 0)
+			if (__paes_convert_key(ctx))
 				return skcipher_walk_done(&walk, -EIO);
+			spin_lock_bh(&ctx->pk_lock);
+			memcpy(param.key, ctx->pk.protkey, MAXPROTKEYSIZE);
+			spin_unlock_bh(&ctx->pk_lock);
 		}
 	}
 	return ret;
@@ -210,6 +268,7 @@ static int cbc_paes_init(struct crypto_skcipher *tfm)
 	struct s390_paes_ctx *ctx = crypto_skcipher_ctx(tfm);
 
 	ctx->kb.key = NULL;
+	spin_lock_init(&ctx->pk_lock);
 
 	return 0;
 }
@@ -221,11 +280,11 @@ static void cbc_paes_exit(struct crypto_skcipher *tfm)
 	_free_kb_keybuf(&ctx->kb);
 }
 
-static int __cbc_paes_set_key(struct s390_paes_ctx *ctx)
+static inline int __cbc_paes_set_key(struct s390_paes_ctx *ctx)
 {
 	unsigned long fc;
 
-	if (__paes_convert_key(&ctx->kb, &ctx->pk))
+	if (__paes_convert_key(ctx))
 		return -EINVAL;
 
 	/* Pick the correct function code based on the protected key type */
@@ -246,7 +305,7 @@ static int cbc_paes_set_key(struct crypto_skcipher *tfm, const u8 *in_key,
 	struct s390_paes_ctx *ctx = crypto_skcipher_ctx(tfm);
 
 	_free_kb_keybuf(&ctx->kb);
-	rc = _copy_key_to_kb(&ctx->kb, in_key, key_len);
+	rc = _key_to_kb(&ctx->kb, in_key, key_len);
 	if (rc)
 		return rc;
 
@@ -268,8 +327,12 @@ static int cbc_paes_crypt(struct skcipher_request *req, unsigned long modifier)
 	ret = skcipher_walk_virt(&walk, req, false);
 	if (ret)
 		return ret;
+
 	memcpy(param.iv, walk.iv, AES_BLOCK_SIZE);
+	spin_lock_bh(&ctx->pk_lock);
 	memcpy(param.key, ctx->pk.protkey, MAXPROTKEYSIZE);
+	spin_unlock_bh(&ctx->pk_lock);
+
 	while ((nbytes = walk.nbytes) != 0) {
 		/* only use complete blocks */
 		n = nbytes & ~(AES_BLOCK_SIZE - 1);
@@ -280,9 +343,11 @@ static int cbc_paes_crypt(struct skcipher_request *req, unsigned long modifier)
 			ret = skcipher_walk_done(&walk, nbytes - k);
 		}
 		if (k < n) {
-			if (__cbc_paes_set_key(ctx) != 0)
+			if (__paes_convert_key(ctx))
 				return skcipher_walk_done(&walk, -EIO);
+			spin_lock_bh(&ctx->pk_lock);
 			memcpy(param.key, ctx->pk.protkey, MAXPROTKEYSIZE);
+			spin_unlock_bh(&ctx->pk_lock);
 		}
 	}
 	return ret;
@@ -322,6 +387,7 @@ static int xts_paes_init(struct crypto_skcipher *tfm)
 
 	ctx->kb[0].key = NULL;
 	ctx->kb[1].key = NULL;
+	spin_lock_init(&ctx->pk_lock);
 
 	return 0;
 }
@@ -334,12 +400,27 @@ static void xts_paes_exit(struct crypto_skcipher *tfm)
 	_free_kb_keybuf(&ctx->kb[1]);
 }
 
-static int __xts_paes_set_key(struct s390_pxts_ctx *ctx)
+static inline int __xts_paes_convert_key(struct s390_pxts_ctx *ctx)
+{
+	struct pkey_protkey pkey0, pkey1;
+
+	if (__paes_keyblob2pkey(&ctx->kb[0], &pkey0) ||
+	    __paes_keyblob2pkey(&ctx->kb[1], &pkey1))
+		return -EINVAL;
+
+	spin_lock_bh(&ctx->pk_lock);
+	memcpy(&ctx->pk[0], &pkey0, sizeof(pkey0));
+	memcpy(&ctx->pk[1], &pkey1, sizeof(pkey1));
+	spin_unlock_bh(&ctx->pk_lock);
+
+	return 0;
+}
+
+static inline int __xts_paes_set_key(struct s390_pxts_ctx *ctx)
 {
 	unsigned long fc;
 
-	if (__paes_convert_key(&ctx->kb[0], &ctx->pk[0]) ||
-	    __paes_convert_key(&ctx->kb[1], &ctx->pk[1]))
+	if (__xts_paes_convert_key(ctx))
 		return -EINVAL;
 
 	if (ctx->pk[0].type != ctx->pk[1].type)
@@ -371,10 +452,10 @@ static int xts_paes_set_key(struct crypto_skcipher *tfm, const u8 *in_key,
 
 	_free_kb_keybuf(&ctx->kb[0]);
 	_free_kb_keybuf(&ctx->kb[1]);
-	rc = _copy_key_to_kb(&ctx->kb[0], in_key, key_len);
+	rc = _key_to_kb(&ctx->kb[0], in_key, key_len);
 	if (rc)
 		return rc;
-	rc = _copy_key_to_kb(&ctx->kb[1], in_key + key_len, key_len);
+	rc = _key_to_kb(&ctx->kb[1], in_key + key_len, key_len);
 	if (rc)
 		return rc;
 
@@ -416,15 +497,17 @@ static int xts_paes_crypt(struct skcipher_request *req, unsigned long modifier)
 	ret = skcipher_walk_virt(&walk, req, false);
 	if (ret)
 		return ret;
+
 	keylen = (ctx->pk[0].type == PKEY_KEYTYPE_AES_128) ? 48 : 64;
 	offset = (ctx->pk[0].type == PKEY_KEYTYPE_AES_128) ? 16 : 0;
-retry:
+
 	memset(&pcc_param, 0, sizeof(pcc_param));
 	memcpy(pcc_param.tweak, walk.iv, sizeof(pcc_param.tweak));
+	spin_lock_bh(&ctx->pk_lock);
 	memcpy(pcc_param.key + offset, ctx->pk[1].protkey, keylen);
-	cpacf_pcc(ctx->fc, pcc_param.key + offset);
-
 	memcpy(xts_param.key + offset, ctx->pk[0].protkey, keylen);
+	spin_unlock_bh(&ctx->pk_lock);
+	cpacf_pcc(ctx->fc, pcc_param.key + offset);
 	memcpy(xts_param.init, pcc_param.xts, 16);
 
 	while ((nbytes = walk.nbytes) != 0) {
@@ -435,11 +518,15 @@ retry:
 		if (k)
 			ret = skcipher_walk_done(&walk, nbytes - k);
 		if (k < n) {
-			if (__xts_paes_set_key(ctx) != 0)
+			if (__xts_paes_convert_key(ctx))
 				return skcipher_walk_done(&walk, -EIO);
-			goto retry;
+			spin_lock_bh(&ctx->pk_lock);
+			memcpy(xts_param.key + offset,
+			       ctx->pk[0].protkey, keylen);
+			spin_unlock_bh(&ctx->pk_lock);
 		}
 	}
+
 	return ret;
 }
 
@@ -476,6 +563,7 @@ static int ctr_paes_init(struct crypto_skcipher *tfm)
 	struct s390_paes_ctx *ctx = crypto_skcipher_ctx(tfm);
 
 	ctx->kb.key = NULL;
+	spin_lock_init(&ctx->pk_lock);
 
 	return 0;
 }
@@ -487,11 +575,11 @@ static void ctr_paes_exit(struct crypto_skcipher *tfm)
 	_free_kb_keybuf(&ctx->kb);
 }
 
-static int __ctr_paes_set_key(struct s390_paes_ctx *ctx)
+static inline int __ctr_paes_set_key(struct s390_paes_ctx *ctx)
 {
 	unsigned long fc;
 
-	if (__paes_convert_key(&ctx->kb, &ctx->pk))
+	if (__paes_convert_key(ctx))
 		return -EINVAL;
 
 	/* Pick the correct function code based on the protected key type */
@@ -513,7 +601,7 @@ static int ctr_paes_set_key(struct crypto_skcipher *tfm, const u8 *in_key,
 	struct s390_paes_ctx *ctx = crypto_skcipher_ctx(tfm);
 
 	_free_kb_keybuf(&ctx->kb);
-	rc = _copy_key_to_kb(&ctx->kb, in_key, key_len);
+	rc = _key_to_kb(&ctx->kb, in_key, key_len);
 	if (rc)
 		return rc;
 
@@ -543,49 +631,65 @@ static int ctr_paes_crypt(struct skcipher_request *req)
 	struct skcipher_walk walk;
 	unsigned int nbytes, n, k;
 	int ret, locked;
-
-	locked = spin_trylock(&ctrblk_lock);
+	struct {
+		u8 key[MAXPROTKEYSIZE];
+	} param;
 
 	ret = skcipher_walk_virt(&walk, req, false);
+	if (ret)
+		return ret;
+
+	spin_lock_bh(&ctx->pk_lock);
+	memcpy(param.key, ctx->pk.protkey, MAXPROTKEYSIZE);
+	spin_unlock_bh(&ctx->pk_lock);
+
+	locked = mutex_trylock(&ctrblk_lock);
+
 	while ((nbytes = walk.nbytes) >= AES_BLOCK_SIZE) {
 		n = AES_BLOCK_SIZE;
 		if (nbytes >= 2*AES_BLOCK_SIZE && locked)
 			n = __ctrblk_init(ctrblk, walk.iv, nbytes);
 		ctrptr = (n > AES_BLOCK_SIZE) ? ctrblk : walk.iv;
-		k = cpacf_kmctr(ctx->fc, ctx->pk.protkey, walk.dst.virt.addr,
+		k = cpacf_kmctr(ctx->fc, &param, walk.dst.virt.addr,
 				walk.src.virt.addr, n, ctrptr);
 		if (k) {
 			if (ctrptr == ctrblk)
 				memcpy(walk.iv, ctrptr + k - AES_BLOCK_SIZE,
 				       AES_BLOCK_SIZE);
 			crypto_inc(walk.iv, AES_BLOCK_SIZE);
-			ret = skcipher_walk_done(&walk, nbytes - n);
+			ret = skcipher_walk_done(&walk, nbytes - k);
 		}
 		if (k < n) {
-			if (__ctr_paes_set_key(ctx) != 0) {
+			if (__paes_convert_key(ctx)) {
 				if (locked)
-					spin_unlock(&ctrblk_lock);
+					mutex_unlock(&ctrblk_lock);
 				return skcipher_walk_done(&walk, -EIO);
 			}
+			spin_lock_bh(&ctx->pk_lock);
+			memcpy(param.key, ctx->pk.protkey, MAXPROTKEYSIZE);
+			spin_unlock_bh(&ctx->pk_lock);
 		}
 	}
 	if (locked)
-		spin_unlock(&ctrblk_lock);
+		mutex_unlock(&ctrblk_lock);
 	/*
 	 * final block may be < AES_BLOCK_SIZE, copy only nbytes
 	 */
 	if (nbytes) {
 		while (1) {
-			if (cpacf_kmctr(ctx->fc, ctx->pk.protkey, buf,
+			if (cpacf_kmctr(ctx->fc, &param, buf,
 					walk.src.virt.addr, AES_BLOCK_SIZE,
 					walk.iv) == AES_BLOCK_SIZE)
 				break;
-			if (__ctr_paes_set_key(ctx) != 0)
+			if (__paes_convert_key(ctx))
 				return skcipher_walk_done(&walk, -EIO);
+			spin_lock_bh(&ctx->pk_lock);
+			memcpy(param.key, ctx->pk.protkey, MAXPROTKEYSIZE);
+			spin_unlock_bh(&ctx->pk_lock);
 		}
 		memcpy(walk.dst.virt.addr, buf, nbytes);
 		crypto_inc(walk.iv, AES_BLOCK_SIZE);
-		ret = skcipher_walk_done(&walk, 0);
+		ret = skcipher_walk_done(&walk, nbytes);
 	}
 
 	return ret;
@@ -618,12 +722,12 @@ static inline void __crypto_unregister_skcipher(struct skcipher_alg *alg)
 
 static void paes_s390_fini(void)
 {
-	if (ctrblk)
-		free_page((unsigned long) ctrblk);
 	__crypto_unregister_skcipher(&ctr_paes_alg);
 	__crypto_unregister_skcipher(&xts_paes_alg);
 	__crypto_unregister_skcipher(&cbc_paes_alg);
 	__crypto_unregister_skcipher(&ecb_paes_alg);
+	if (ctrblk)
+		free_page((unsigned long) ctrblk);
 }
 
 static int __init paes_s390_init(void)
@@ -661,14 +765,14 @@ static int __init paes_s390_init(void)
 	if (cpacf_test_func(&kmctr_functions, CPACF_KMCTR_PAES_128) ||
 	    cpacf_test_func(&kmctr_functions, CPACF_KMCTR_PAES_192) ||
 	    cpacf_test_func(&kmctr_functions, CPACF_KMCTR_PAES_256)) {
-		ret = crypto_register_skcipher(&ctr_paes_alg);
-		if (ret)
-			goto out_err;
 		ctrblk = (u8 *) __get_free_page(GFP_KERNEL);
 		if (!ctrblk) {
 			ret = -ENOMEM;
 			goto out_err;
 		}
+		ret = crypto_register_skcipher(&ctr_paes_alg);
+		if (ret)
+			goto out_err;
 	}
 
 	return 0;
diff --git a/arch/s390/hypfs/inode.c b/arch/s390/hypfs/inode.c
index 70139d0791b6..5c97f48cea91 100644
--- a/arch/s390/hypfs/inode.c
+++ b/arch/s390/hypfs/inode.c
@@ -209,17 +209,12 @@ static int hypfs_release(struct inode *inode, struct file *filp)
 
 enum { Opt_uid, Opt_gid, };
 
-static const struct fs_parameter_spec hypfs_param_specs[] = {
+static const struct fs_parameter_spec hypfs_fs_parameters[] = {
 	fsparam_u32("gid", Opt_gid),
 	fsparam_u32("uid", Opt_uid),
 	{}
 };
 
-static const struct fs_parameter_description hypfs_fs_parameters = {
-	.name		= "hypfs",
-	.specs		= hypfs_param_specs,
-};
-
 static int hypfs_parse_param(struct fs_context *fc, struct fs_parameter *param)
 {
 	struct hypfs_sb_info *hypfs_info = fc->s_fs_info;
@@ -228,7 +223,7 @@ static int hypfs_parse_param(struct fs_context *fc, struct fs_parameter *param)
 	kgid_t gid;
 	int opt;
 
-	opt = fs_parse(fc, &hypfs_fs_parameters, param, &result);
+	opt = fs_parse(fc, hypfs_fs_parameters, param, &result);
 	if (opt < 0)
 		return opt;
 
@@ -455,7 +450,7 @@ static struct file_system_type hypfs_type = {
 	.owner		= THIS_MODULE,
 	.name		= "s390_hypfs",
 	.init_fs_context = hypfs_init_fs_context,
-	.parameters	= &hypfs_fs_parameters,
+	.parameters	= hypfs_fs_parameters,
 	.kill_sb	= hypfs_kill_super
 };
 
diff --git a/arch/s390/include/asm/Kbuild b/arch/s390/include/asm/Kbuild
index 2531f673f099..1832ae6442ef 100644
--- a/arch/s390/include/asm/Kbuild
+++ b/arch/s390/include/asm/Kbuild
@@ -7,7 +7,6 @@ generated-y += unistd_nr.h
 generic-y += asm-offsets.h
 generic-y += cacheflush.h
 generic-y += device.h
-generic-y += dma-contiguous.h
 generic-y += dma-mapping.h
 generic-y += div64.h
 generic-y += emergency-restart.h
diff --git a/arch/s390/include/asm/archrandom.h b/arch/s390/include/asm/archrandom.h
index c67b82dfa558..de61ce562052 100644
--- a/arch/s390/include/asm/archrandom.h
+++ b/arch/s390/include/asm/archrandom.h
@@ -21,29 +21,17 @@ extern atomic64_t s390_arch_random_counter;
 
 bool s390_arch_random_generate(u8 *buf, unsigned int nbytes);
 
-static inline bool arch_has_random(void)
+static inline bool __must_check arch_get_random_long(unsigned long *v)
 {
 	return false;
 }
 
-static inline bool arch_has_random_seed(void)
+static inline bool __must_check arch_get_random_int(unsigned int *v)
 {
-	if (static_branch_likely(&s390_arch_random_available))
-		return true;
 	return false;
 }
 
-static inline bool arch_get_random_long(unsigned long *v)
-{
-	return false;
-}
-
-static inline bool arch_get_random_int(unsigned int *v)
-{
-	return false;
-}
-
-static inline bool arch_get_random_seed_long(unsigned long *v)
+static inline bool __must_check arch_get_random_seed_long(unsigned long *v)
 {
 	if (static_branch_likely(&s390_arch_random_available)) {
 		return s390_arch_random_generate((u8 *)v, sizeof(*v));
@@ -51,7 +39,7 @@ static inline bool arch_get_random_seed_long(unsigned long *v)
 	return false;
 }
 
-static inline bool arch_get_random_seed_int(unsigned int *v)
+static inline bool __must_check arch_get_random_seed_int(unsigned int *v)
 {
 	if (static_branch_likely(&s390_arch_random_available)) {
 		return s390_arch_random_generate((u8 *)v, sizeof(*v));
diff --git a/arch/s390/include/asm/compat.h b/arch/s390/include/asm/compat.h
index 63b46e30b2c3..9547cd5d6cdc 100644
--- a/arch/s390/include/asm/compat.h
+++ b/arch/s390/include/asm/compat.h
@@ -177,11 +177,7 @@ static inline void __user *compat_ptr(compat_uptr_t uptr)
 {
 	return (void __user *)(unsigned long)(uptr & 0x7fffffffUL);
 }
-
-static inline compat_uptr_t ptr_to_compat(void __user *uptr)
-{
-	return (u32)(unsigned long)uptr;
-}
+#define compat_ptr(uptr) compat_ptr(uptr)
 
 #ifdef CONFIG_COMPAT
 
diff --git a/arch/s390/include/asm/kprobes.h b/arch/s390/include/asm/kprobes.h
index b106aa29bf55..09cdb632a490 100644
--- a/arch/s390/include/asm/kprobes.h
+++ b/arch/s390/include/asm/kprobes.h
@@ -54,7 +54,6 @@ typedef u16 kprobe_opcode_t;
 struct arch_specific_insn {
 	/* copy of original instruction */
 	kprobe_opcode_t *insn;
-	unsigned int is_ftrace_insn : 1;
 };
 
 struct prev_kprobe {
diff --git a/arch/s390/include/asm/kvm_host.h b/arch/s390/include/asm/kvm_host.h
index 02f4c21c57f6..1726224e7772 100644
--- a/arch/s390/include/asm/kvm_host.h
+++ b/arch/s390/include/asm/kvm_host.h
@@ -122,6 +122,11 @@ struct mcck_volatile_info {
 	__u32 reserved;
 };
 
+#define CR0_INITIAL_MASK (CR0_UNUSED_56 | CR0_INTERRUPT_KEY_SUBMASK | \
+			  CR0_MEASUREMENT_ALERT_SUBMASK)
+#define CR14_INITIAL_MASK (CR14_UNUSED_32 | CR14_UNUSED_33 | \
+			   CR14_EXTERNAL_DAMAGE_SUBMASK)
+
 #define CPUSTAT_STOPPED    0x80000000
 #define CPUSTAT_WAIT       0x10000000
 #define CPUSTAT_ECALL_PEND 0x08000000
@@ -914,7 +919,6 @@ extern int kvm_s390_gisc_unregister(struct kvm *kvm, u32 gisc);
 
 static inline void kvm_arch_hardware_disable(void) {}
 static inline void kvm_arch_sync_events(struct kvm *kvm) {}
-static inline void kvm_arch_vcpu_uninit(struct kvm_vcpu *vcpu) {}
 static inline void kvm_arch_sched_in(struct kvm_vcpu *vcpu, int cpu) {}
 static inline void kvm_arch_free_memslot(struct kvm *kvm,
 		struct kvm_memory_slot *free, struct kvm_memory_slot *dont) {}
diff --git a/arch/s390/include/asm/page.h b/arch/s390/include/asm/page.h
index a4d38092530a..85e944f04c70 100644
--- a/arch/s390/include/asm/page.h
+++ b/arch/s390/include/asm/page.h
@@ -33,6 +33,8 @@
 #define ARCH_HAS_PREPARE_HUGEPAGE
 #define ARCH_HAS_HUGEPAGE_CLEAR_FLUSH
 
+#define HAVE_ARCH_HUGETLB_UNMAPPED_AREA
+
 #include <asm/setup.h>
 #ifndef __ASSEMBLY__
 
diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h
index 7b03037a8475..137a3920ca36 100644
--- a/arch/s390/include/asm/pgtable.h
+++ b/arch/s390/include/asm/pgtable.h
@@ -673,6 +673,7 @@ static inline int pud_none(pud_t pud)
 	return pud_val(pud) == _REGION3_ENTRY_EMPTY;
 }
 
+#define pud_leaf	pud_large
 static inline int pud_large(pud_t pud)
 {
 	if ((pud_val(pud) & _REGION_ENTRY_TYPE_MASK) != _REGION_ENTRY_TYPE_R3)
@@ -690,6 +691,7 @@ static inline unsigned long pud_pfn(pud_t pud)
 	return (pud_val(pud) & origin_mask) >> PAGE_SHIFT;
 }
 
+#define pmd_leaf	pmd_large
 static inline int pmd_large(pmd_t pmd)
 {
 	return (pmd_val(pmd) & _SEGMENT_ENTRY_LARGE) != 0;
diff --git a/arch/s390/include/asm/setup.h b/arch/s390/include/asm/setup.h
index 69289e99cabd..b241ddb67caf 100644
--- a/arch/s390/include/asm/setup.h
+++ b/arch/s390/include/asm/setup.h
@@ -79,6 +79,13 @@ struct parmarea {
 	char command_line[ARCH_COMMAND_LINE_SIZE];	/* 0x10480 */
 };
 
+extern unsigned int zlib_dfltcc_support;
+#define ZLIB_DFLTCC_DISABLED		0
+#define ZLIB_DFLTCC_FULL		1
+#define ZLIB_DFLTCC_DEFLATE_ONLY	2
+#define ZLIB_DFLTCC_INFLATE_ONLY	3
+#define ZLIB_DFLTCC_FULL_DEBUG		4
+
 extern int noexec_disabled;
 extern int memory_end_set;
 extern unsigned long memory_end;
diff --git a/arch/s390/include/uapi/asm/pkey.h b/arch/s390/include/uapi/asm/pkey.h
index e22f0720bbb8..d27d7d329263 100644
--- a/arch/s390/include/uapi/asm/pkey.h
+++ b/arch/s390/include/uapi/asm/pkey.h
@@ -25,10 +25,11 @@
 #define MAXPROTKEYSIZE	64	/* a protected key blob may be up to 64 bytes */
 #define MAXCLRKEYSIZE	32	   /* a clear key value may be up to 32 bytes */
 #define MAXAESCIPHERKEYSIZE 136  /* our aes cipher keys have always 136 bytes */
+#define MINEP11AESKEYBLOBSIZE 256  /* min EP11 AES key blob size  */
+#define MAXEP11AESKEYBLOBSIZE 320  /* max EP11 AES key blob size */
 
-/* Minimum and maximum size of a key blob */
+/* Minimum size of a key blob */
 #define MINKEYBLOBSIZE	SECKEYBLOBSIZE
-#define MAXKEYBLOBSIZE	MAXAESCIPHERKEYSIZE
 
 /* defines for the type field within the pkey_protkey struct */
 #define PKEY_KEYTYPE_AES_128		      1
@@ -39,6 +40,7 @@
 enum pkey_key_type {
 	PKEY_TYPE_CCA_DATA   = (__u32) 1,
 	PKEY_TYPE_CCA_CIPHER = (__u32) 2,
+	PKEY_TYPE_EP11	     = (__u32) 3,
 };
 
 /* the newer ioctls use a pkey_key_size enum for key size information */
@@ -200,7 +202,7 @@ struct pkey_kblob2pkey {
 
 /*
  * Generate secure key, version 2.
- * Generate either a CCA AES secure key or a CCA AES cipher key.
+ * Generate CCA AES secure key, CCA AES cipher key or EP11 AES secure key.
  * There needs to be a list of apqns given with at least one entry in there.
  * All apqns in the list need to be exact apqns, 0xFFFF as ANY card or domain
  * is not supported. The implementation walks through the list of apqns and
@@ -210,10 +212,13 @@ struct pkey_kblob2pkey {
  * (return -1 with errno ENODEV). You may use the PKEY_APQNS4KT ioctl to
  * generate a list of apqns based on the key type to generate.
  * The keygenflags argument is passed to the low level generation functions
- * individual for the key type and has a key type specific meaning. Currently
- * only CCA AES cipher keys react to this parameter: Use one or more of the
- * PKEY_KEYGEN_* flags to widen the export possibilities. By default a cipher
- * key is only exportable for CPACF (PKEY_KEYGEN_XPRT_CPAC).
+ * individual for the key type and has a key type specific meaning. When
+ * generating CCA cipher keys you can use one or more of the PKEY_KEYGEN_*
+ * flags to widen the export possibilities. By default a cipher key is
+ * only exportable for CPACF (PKEY_KEYGEN_XPRT_CPAC).
+ * The keygenflag argument for generating an EP11 AES key should either be 0
+ * to use the defaults which are XCP_BLOB_ENCRYPT, XCP_BLOB_DECRYPT and
+ * XCP_BLOB_PROTKEY_EXTRACTABLE or a valid combination of XCP_BLOB_* flags.
  */
 struct pkey_genseck2 {
 	struct pkey_apqn __user *apqns; /* in: ptr to list of apqn targets*/
@@ -229,8 +234,8 @@ struct pkey_genseck2 {
 
 /*
  * Generate secure key from clear key value, version 2.
- * Construct a CCA AES secure key or CCA AES cipher key from a given clear key
- * value.
+ * Construct an CCA AES secure key, CCA AES cipher key or EP11 AES secure
+ * key from a given clear key value.
  * There needs to be a list of apqns given with at least one entry in there.
  * All apqns in the list need to be exact apqns, 0xFFFF as ANY card or domain
  * is not supported. The implementation walks through the list of apqns and
@@ -240,10 +245,13 @@ struct pkey_genseck2 {
  * (return -1 with errno ENODEV). You may use the PKEY_APQNS4KT ioctl to
  * generate a list of apqns based on the key type to generate.
  * The keygenflags argument is passed to the low level generation functions
- * individual for the key type and has a key type specific meaning. Currently
- * only CCA AES cipher keys react to this parameter: Use one or more of the
- * PKEY_KEYGEN_* flags to widen the export possibilities. By default a cipher
- * key is only exportable for CPACF (PKEY_KEYGEN_XPRT_CPAC).
+ * individual for the key type and has a key type specific meaning. When
+ * generating CCA cipher keys you can use one or more of the PKEY_KEYGEN_*
+ * flags to widen the export possibilities. By default a cipher key is
+ * only exportable for CPACF (PKEY_KEYGEN_XPRT_CPAC).
+ * The keygenflag argument for generating an EP11 AES key should either be 0
+ * to use the defaults which are XCP_BLOB_ENCRYPT, XCP_BLOB_DECRYPT and
+ * XCP_BLOB_PROTKEY_EXTRACTABLE or a valid combination of XCP_BLOB_* flags.
  */
 struct pkey_clr2seck2 {
 	struct pkey_apqn __user *apqns; /* in: ptr to list of apqn targets */
@@ -266,14 +274,19 @@ struct pkey_clr2seck2 {
  * with one apqn able to handle this key.
  * The function also checks for the master key verification patterns
  * of the key matching to the current or alternate mkvp of the apqn.
- * Currently CCA AES secure keys and CCA AES cipher keys are supported.
- * The flags field is updated with some additional info about the apqn mkvp
+ * For CCA AES secure keys and CCA AES cipher keys this means to check
+ * the key's mkvp against the current or old mkvp of the apqns. The flags
+ * field is updated with some additional info about the apqn mkvp
  * match: If the current mkvp matches to the key's mkvp then the
  * PKEY_FLAGS_MATCH_CUR_MKVP bit is set, if the alternate mkvp matches to
  * the key's mkvp the PKEY_FLAGS_MATCH_ALT_MKVP is set. For CCA keys the
  * alternate mkvp is the old master key verification pattern.
  * CCA AES secure keys are also checked to have the CPACF export allowed
  * bit enabled (XPRTCPAC) in the kmf1 field.
+ * EP11 keys are also supported and the wkvp of the key is checked against
+ * the current wkvp of the apqns. There is no alternate for this type of
+ * key and so on a match the flag PKEY_FLAGS_MATCH_CUR_MKVP always is set.
+ * EP11 keys are also checked to have XCP_BLOB_PROTKEY_EXTRACTABLE set.
  * The ioctl returns 0 as long as the given or found apqn matches to
  * matches with the current or alternate mkvp to the key's mkvp. If the given
  * apqn does not match or there is no such apqn found, -1 with errno
@@ -313,16 +326,20 @@ struct pkey_kblob2pkey2 {
 /*
  * Build a list of APQNs based on a key blob given.
  * Is able to find out which type of secure key is given (CCA AES secure
- * key or CCA AES cipher key) and tries to find all matching crypto cards
- * based on the MKVP and maybe other criterias (like CCA AES cipher keys
- * need a CEX5C or higher). The list of APQNs is further filtered by the key's
- * mkvp which needs to match to either the current mkvp or the alternate mkvp
- * (which is the old mkvp on CCA adapters) of the apqns. The flags argument may
- * be used to limit the matching apqns. If the PKEY_FLAGS_MATCH_CUR_MKVP is
- * given, only the current mkvp of each apqn is compared. Likewise with the
- * PKEY_FLAGS_MATCH_ALT_MKVP. If both are given, it is assumed to
- * return apqns where either the current or the alternate mkvp
+ * key, CCA AES cipher key or EP11 AES key) and tries to find all matching
+ * crypto cards based on the MKVP and maybe other criterias (like CCA AES
+ * cipher keys need a CEX5C or higher, EP11 keys with BLOB_PKEY_EXTRACTABLE
+ * need a CEX7 and EP11 api version 4). The list of APQNs is further filtered
+ * by the key's mkvp which needs to match to either the current mkvp (CCA and
+ * EP11) or the alternate mkvp (old mkvp, CCA adapters only) of the apqns. The
+ * flags argument may be used to limit the matching apqns. If the
+ * PKEY_FLAGS_MATCH_CUR_MKVP is given, only the current mkvp of each apqn is
+ * compared. Likewise with the PKEY_FLAGS_MATCH_ALT_MKVP. If both are given, it
+ * is assumed to return apqns where either the current or the alternate mkvp
  * matches. At least one of the matching flags needs to be given.
+ * The flags argument for EP11 keys has no further action and is currently
+ * ignored (but needs to be given as PKEY_FLAGS_MATCH_CUR_MKVP) as there is only
+ * the wkvp from the key to match against the apqn's wkvp.
  * The list of matching apqns is stored into the space given by the apqns
  * argument and the number of stored entries goes into apqn_entries. If the list
  * is empty (apqn_entries is 0) the apqn_entries field is updated to the number
@@ -356,6 +373,10 @@ struct pkey_apqns4key {
  * If both are given, it is assumed to return apqns where either the
  * current or the alternate mkvp matches. If no match flag is given
  * (flags is 0) the mkvp values are ignored for the match process.
+ * For EP11 keys there is only the current wkvp. So if the apqns should also
+ * match to a given wkvp, then the PKEY_FLAGS_MATCH_CUR_MKVP flag should be
+ * set. The wkvp value is 32 bytes but only the leftmost 16 bytes are compared
+ * against the leftmost 16 byte of the wkvp of the apqn.
  * The list of matching apqns is stored into the space given by the apqns
  * argument and the number of stored entries goes into apqn_entries. If the list
  * is empty (apqn_entries is 0) the apqn_entries field is updated to the number
diff --git a/arch/s390/include/uapi/asm/zcrypt.h b/arch/s390/include/uapi/asm/zcrypt.h
index f9e5e1f0821d..5a2177e96e88 100644
--- a/arch/s390/include/uapi/asm/zcrypt.h
+++ b/arch/s390/include/uapi/asm/zcrypt.h
@@ -161,17 +161,17 @@ struct ica_xcRB {
  * @payload_len:	Payload length
  */
 struct ep11_cprb {
-	__u16		cprb_len;
-	unsigned char	cprb_ver_id;
-	unsigned char	pad_000[2];
-	unsigned char	flags;
-	unsigned char	func_id[2];
-	__u32		source_id;
-	__u32		target_id;
-	__u32		ret_code;
-	__u32		reserved1;
-	__u32		reserved2;
-	__u32		payload_len;
+	__u16	cprb_len;
+	__u8	cprb_ver_id;
+	__u8	pad_000[2];
+	__u8	flags;
+	__u8	func_id[2];
+	__u32	source_id;
+	__u32	target_id;
+	__u32	ret_code;
+	__u32	reserved1;
+	__u32	reserved2;
+	__u32	payload_len;
 } __attribute__((packed));
 
 /**
@@ -197,13 +197,13 @@ struct ep11_target_dev {
  */
 struct ep11_urb {
 	__u16		targets_num;
-	__u64		targets;
+	__u8 __user    *targets;
 	__u64		weight;
 	__u64		req_no;
 	__u64		req_len;
-	__u64		req;
+	__u8 __user    *req;
 	__u64		resp_len;
-	__u64		resp;
+	__u8 __user    *resp;
 } __attribute__((packed));
 
 /**
@@ -237,7 +237,9 @@ struct zcrypt_device_matrix_ext {
 	struct zcrypt_device_status_ext device[MAX_ZDEV_ENTRIES_EXT];
 };
 
-#define AUTOSELECT 0xFFFFFFFF
+#define AUTOSELECT  0xFFFFFFFF
+#define AUTOSEL_AP  ((__u16) 0xFFFF)
+#define AUTOSEL_DOM ((__u16) 0xFFFF)
 
 #define ZCRYPT_IOCTL_MAGIC 'z'
 
diff --git a/arch/s390/kernel/ftrace.c b/arch/s390/kernel/ftrace.c
index 1bb85f60c0dd..4cd9b1ada834 100644
--- a/arch/s390/kernel/ftrace.c
+++ b/arch/s390/kernel/ftrace.c
@@ -72,15 +72,6 @@ static inline void ftrace_generate_orig_insn(struct ftrace_insn *insn)
 #endif
 }
 
-static inline int is_kprobe_on_ftrace(struct ftrace_insn *insn)
-{
-#ifdef CONFIG_KPROBES
-	if (insn->opc == BREAKPOINT_INSTRUCTION)
-		return 1;
-#endif
-	return 0;
-}
-
 static inline void ftrace_generate_kprobe_nop_insn(struct ftrace_insn *insn)
 {
 #ifdef CONFIG_KPROBES
@@ -114,16 +105,6 @@ int ftrace_make_nop(struct module *mod, struct dyn_ftrace *rec,
 		/* Initial code replacement */
 		ftrace_generate_orig_insn(&orig);
 		ftrace_generate_nop_insn(&new);
-	} else if (is_kprobe_on_ftrace(&old)) {
-		/*
-		 * If we find a breakpoint instruction, a kprobe has been
-		 * placed at the beginning of the function. We write the
-		 * constant KPROBE_ON_FTRACE_NOP into the remaining four
-		 * bytes of the original instruction so that the kprobes
-		 * handler can execute a nop, if it reaches this breakpoint.
-		 */
-		ftrace_generate_kprobe_call_insn(&orig);
-		ftrace_generate_kprobe_nop_insn(&new);
 	} else {
 		/* Replace ftrace call with a nop. */
 		ftrace_generate_call_insn(&orig, rec->ip);
@@ -142,21 +123,10 @@ int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
 
 	if (probe_kernel_read(&old, (void *) rec->ip, sizeof(old)))
 		return -EFAULT;
-	if (is_kprobe_on_ftrace(&old)) {
-		/*
-		 * If we find a breakpoint instruction, a kprobe has been
-		 * placed at the beginning of the function. We write the
-		 * constant KPROBE_ON_FTRACE_CALL into the remaining four
-		 * bytes of the original instruction so that the kprobes
-		 * handler can execute a brasl if it reaches this breakpoint.
-		 */
-		ftrace_generate_kprobe_nop_insn(&orig);
-		ftrace_generate_kprobe_call_insn(&new);
-	} else {
-		/* Replace nop with an ftrace call. */
-		ftrace_generate_nop_insn(&orig);
-		ftrace_generate_call_insn(&new, rec->ip);
-	}
+	/* Replace nop with an ftrace call. */
+	ftrace_generate_nop_insn(&orig);
+	ftrace_generate_call_insn(&new, rec->ip);
+
 	/* Verify that the to be replaced code matches what we expect. */
 	if (memcmp(&orig, &old, sizeof(old)))
 		return -EINVAL;
@@ -241,3 +211,45 @@ int ftrace_disable_ftrace_graph_caller(void)
 }
 
 #endif /* CONFIG_FUNCTION_GRAPH_TRACER */
+
+#ifdef CONFIG_KPROBES_ON_FTRACE
+void kprobe_ftrace_handler(unsigned long ip, unsigned long parent_ip,
+		struct ftrace_ops *ops, struct pt_regs *regs)
+{
+	struct kprobe_ctlblk *kcb;
+	struct kprobe *p = get_kprobe((kprobe_opcode_t *)ip);
+
+	if (unlikely(!p) || kprobe_disabled(p))
+		return;
+
+	if (kprobe_running()) {
+		kprobes_inc_nmissed_count(p);
+		return;
+	}
+
+	__this_cpu_write(current_kprobe, p);
+
+	kcb = get_kprobe_ctlblk();
+	kcb->kprobe_status = KPROBE_HIT_ACTIVE;
+
+	instruction_pointer_set(regs, ip);
+
+	if (!p->pre_handler || !p->pre_handler(p, regs)) {
+
+		instruction_pointer_set(regs, ip + MCOUNT_INSN_SIZE);
+
+		if (unlikely(p->post_handler)) {
+			kcb->kprobe_status = KPROBE_HIT_SSDONE;
+			p->post_handler(p, regs, 0);
+		}
+	}
+	__this_cpu_write(current_kprobe, NULL);
+}
+NOKPROBE_SYMBOL(kprobe_ftrace_handler);
+
+int arch_prepare_kprobe_ftrace(struct kprobe *p)
+{
+	p->ainsn.insn = NULL;
+	return 0;
+}
+#endif
diff --git a/arch/s390/kernel/kprobes.c b/arch/s390/kernel/kprobes.c
index 6f1388391620..548d0ea9808d 100644
--- a/arch/s390/kernel/kprobes.c
+++ b/arch/s390/kernel/kprobes.c
@@ -56,21 +56,10 @@ struct kprobe_insn_cache kprobe_s390_insn_slots = {
 
 static void copy_instruction(struct kprobe *p)
 {
-	unsigned long ip = (unsigned long) p->addr;
 	s64 disp, new_disp;
 	u64 addr, new_addr;
 
-	if (ftrace_location(ip) == ip) {
-		/*
-		 * If kprobes patches the instruction that is morphed by
-		 * ftrace make sure that kprobes always sees the branch
-		 * "jg .+24" that skips the mcount block or the "brcl 0,0"
-		 * in case of hotpatch.
-		 */
-		ftrace_generate_nop_insn((struct ftrace_insn *)p->ainsn.insn);
-		p->ainsn.is_ftrace_insn = 1;
-	} else
-		memcpy(p->ainsn.insn, p->addr, insn_length(*p->addr >> 8));
+	memcpy(p->ainsn.insn, p->addr, insn_length(*p->addr >> 8));
 	p->opcode = p->ainsn.insn[0];
 	if (!probe_is_insn_relative_long(p->ainsn.insn))
 		return;
@@ -136,11 +125,6 @@ int arch_prepare_kprobe(struct kprobe *p)
 }
 NOKPROBE_SYMBOL(arch_prepare_kprobe);
 
-int arch_check_ftrace_location(struct kprobe *p)
-{
-	return 0;
-}
-
 struct swap_insn_args {
 	struct kprobe *p;
 	unsigned int arm_kprobe : 1;
@@ -149,28 +133,11 @@ struct swap_insn_args {
 static int swap_instruction(void *data)
 {
 	struct swap_insn_args *args = data;
-	struct ftrace_insn new_insn, *insn;
 	struct kprobe *p = args->p;
-	size_t len;
-
-	new_insn.opc = args->arm_kprobe ? BREAKPOINT_INSTRUCTION : p->opcode;
-	len = sizeof(new_insn.opc);
-	if (!p->ainsn.is_ftrace_insn)
-		goto skip_ftrace;
-	len = sizeof(new_insn);
-	insn = (struct ftrace_insn *) p->addr;
-	if (args->arm_kprobe) {
-		if (is_ftrace_nop(insn))
-			new_insn.disp = KPROBE_ON_FTRACE_NOP;
-		else
-			new_insn.disp = KPROBE_ON_FTRACE_CALL;
-	} else {
-		ftrace_generate_call_insn(&new_insn, (unsigned long)p->addr);
-		if (insn->disp == KPROBE_ON_FTRACE_NOP)
-			ftrace_generate_nop_insn(&new_insn);
-	}
-skip_ftrace:
-	s390_kernel_write(p->addr, &new_insn, len);
+	u16 opc;
+
+	opc = args->arm_kprobe ? BREAKPOINT_INSTRUCTION : p->opcode;
+	s390_kernel_write(p->addr, &opc, sizeof(opc));
 	return 0;
 }
 NOKPROBE_SYMBOL(swap_instruction);
@@ -464,24 +431,6 @@ static void resume_execution(struct kprobe *p, struct pt_regs *regs)
 	unsigned long ip = regs->psw.addr;
 	int fixup = probe_get_fixup_type(p->ainsn.insn);
 
-	/* Check if the kprobes location is an enabled ftrace caller */
-	if (p->ainsn.is_ftrace_insn) {
-		struct ftrace_insn *insn = (struct ftrace_insn *) p->addr;
-		struct ftrace_insn call_insn;
-
-		ftrace_generate_call_insn(&call_insn, (unsigned long) p->addr);
-		/*
-		 * A kprobe on an enabled ftrace call site actually single
-		 * stepped an unconditional branch (ftrace nop equivalent).
-		 * Now we need to fixup things and pretend that a brasl r0,...
-		 * was executed instead.
-		 */
-		if (insn->disp == KPROBE_ON_FTRACE_CALL) {
-			ip += call_insn.disp * 2 - MCOUNT_INSN_SIZE;
-			regs->gprs[0] = (unsigned long)p->addr + sizeof(*insn);
-		}
-	}
-
 	if (fixup & FIXUP_PSW_NORMAL)
 		ip += (unsigned long) p->addr - (unsigned long) p->ainsn.insn;
 
diff --git a/arch/s390/kernel/mcount.S b/arch/s390/kernel/mcount.S
index f942341429b1..7458dcfd6464 100644
--- a/arch/s390/kernel/mcount.S
+++ b/arch/s390/kernel/mcount.S
@@ -42,6 +42,9 @@ ENTRY(ftrace_caller)
 	.globl	ftrace_regs_caller
 	.set	ftrace_regs_caller,ftrace_caller
 	stg	%r14,(__SF_GPRS+8*8)(%r15)	# save traced function caller
+	lghi	%r14,0				# save condition code
+	ipm	%r14				# don't put any instructions
+	sllg	%r14,%r14,16			# clobbering CC before this point
 	lgr	%r1,%r15
 #if !(defined(CC_USING_HOTPATCH) || defined(CC_USING_NOP_MCOUNT))
 	aghi	%r0,MCOUNT_RETURN_FIXUP
@@ -54,6 +57,9 @@ ENTRY(ftrace_caller)
 	# allocate pt_regs and stack frame for ftrace_trace_function
 	aghi	%r15,-STACK_FRAME_SIZE
 	stg	%r1,(STACK_PTREGS_GPRS+15*8)(%r15)
+	stg	%r14,(STACK_PTREGS_PSW)(%r15)
+	lg	%r14,(__SF_GPRS+8*8)(%r1)	# restore original return address
+	stosm	(STACK_PTREGS_PSW)(%r15),0
 	aghi	%r1,-TRACED_FUNC_FRAME_SIZE
 	stg	%r1,__SF_BACKCHAIN(%r15)
 	stg	%r0,(STACK_PTREGS_PSW+8)(%r15)
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index d5fbd754f41a..b2c2f75860e8 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -111,6 +111,8 @@ unsigned long __bootdata_preserved(__etext_dma);
 unsigned long __bootdata_preserved(__sdma);
 unsigned long __bootdata_preserved(__edma);
 unsigned long __bootdata_preserved(__kaslr_offset);
+unsigned int __bootdata_preserved(zlib_dfltcc_support);
+EXPORT_SYMBOL(zlib_dfltcc_support);
 
 unsigned long VMALLOC_START;
 EXPORT_SYMBOL(VMALLOC_START);
@@ -241,8 +243,6 @@ static void __init conmode_default(void)
 		SET_CONSOLE_SCLP;
 #endif
 	}
-	if (IS_ENABLED(CONFIG_VT) && IS_ENABLED(CONFIG_DUMMY_CONSOLE))
-		conswitchp = &dummy_con;
 }
 
 #ifdef CONFIG_CRASH_DUMP
@@ -761,14 +761,6 @@ static void __init free_mem_detect_info(void)
 		memblock_free(start, size);
 }
 
-static void __init memblock_physmem_add(phys_addr_t start, phys_addr_t size)
-{
-	memblock_dbg("memblock_physmem_add: [%#016llx-%#016llx]\n",
-		     start, start + size - 1);
-	memblock_add_range(&memblock.memory, start, size, 0, 0);
-	memblock_add_range(&memblock.physmem, start, size, 0, 0);
-}
-
 static const char * __init get_mem_info_source(void)
 {
 	switch (mem_detect.info_source) {
@@ -793,8 +785,10 @@ static void __init memblock_add_mem_detect_info(void)
 		     get_mem_info_source(), mem_detect.info_source);
 	/* keep memblock lists close to the kernel */
 	memblock_set_bottom_up(true);
-	for_each_mem_detect_block(i, &start, &end)
+	for_each_mem_detect_block(i, &start, &end) {
+		memblock_add(start, end - start);
 		memblock_physmem_add(start, end - start);
+	}
 	memblock_set_bottom_up(false);
 	memblock_dump_all();
 }
diff --git a/arch/s390/kernel/syscalls/syscall.tbl b/arch/s390/kernel/syscalls/syscall.tbl
index 3054e9c035a3..bd7bd3581a0f 100644
--- a/arch/s390/kernel/syscalls/syscall.tbl
+++ b/arch/s390/kernel/syscalls/syscall.tbl
@@ -438,3 +438,5 @@
 433  common	fspick			sys_fspick			sys_fspick
 434  common	pidfd_open		sys_pidfd_open			sys_pidfd_open
 435  common	clone3			sys_clone3			sys_clone3
+437  common	openat2			sys_openat2			sys_openat2
+438  common	pidfd_getfd		sys_pidfd_getfd			sys_pidfd_getfd
diff --git a/arch/s390/kvm/interrupt.c b/arch/s390/kvm/interrupt.c
index 165dea4c7f19..c06c89d370a7 100644
--- a/arch/s390/kvm/interrupt.c
+++ b/arch/s390/kvm/interrupt.c
@@ -2190,7 +2190,7 @@ static int flic_ais_mode_get_all(struct kvm *kvm, struct kvm_device_attr *attr)
 		return -EINVAL;
 
 	if (!test_kvm_facility(kvm, 72))
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 
 	mutex_lock(&fi->ais_lock);
 	ais.simm = fi->simm;
@@ -2499,7 +2499,7 @@ static int modify_ais_mode(struct kvm *kvm, struct kvm_device_attr *attr)
 	int ret = 0;
 
 	if (!test_kvm_facility(kvm, 72))
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 
 	if (copy_from_user(&req, (void __user *)attr->addr, sizeof(req)))
 		return -EFAULT;
@@ -2579,7 +2579,7 @@ static int flic_ais_mode_set_all(struct kvm *kvm, struct kvm_device_attr *attr)
 	struct kvm_s390_ais_all ais;
 
 	if (!test_kvm_facility(kvm, 72))
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 
 	if (copy_from_user(&ais, (void __user *)attr->addr, sizeof(ais)))
 		return -EFAULT;
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index d9e6bf3d54f0..d7ff30e45589 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -529,6 +529,7 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
 	case KVM_CAP_S390_CMMA_MIGRATION:
 	case KVM_CAP_S390_AIS:
 	case KVM_CAP_S390_AIS_MIGRATION:
+	case KVM_CAP_S390_VCPU_RESETS:
 		r = 1;
 		break;
 	case KVM_CAP_S390_HPAGE_1M:
@@ -2530,9 +2531,6 @@ void kvm_arch_vcpu_destroy(struct kvm_vcpu *vcpu)
 	if (vcpu->kvm->arch.use_cmma)
 		kvm_s390_vcpu_unsetup_cmma(vcpu);
 	free_page((unsigned long)(vcpu->arch.sie_block));
-
-	kvm_vcpu_uninit(vcpu);
-	kmem_cache_free(kvm_vcpu_cache, vcpu);
 }
 
 static void kvm_free_vcpus(struct kvm *kvm)
@@ -2541,7 +2539,7 @@ static void kvm_free_vcpus(struct kvm *kvm)
 	struct kvm_vcpu *vcpu;
 
 	kvm_for_each_vcpu(i, vcpu, kvm)
-		kvm_arch_vcpu_destroy(vcpu);
+		kvm_vcpu_destroy(vcpu);
 
 	mutex_lock(&kvm->lock);
 	for (i = 0; i < atomic_read(&kvm->online_vcpus); i++)
@@ -2703,39 +2701,6 @@ static int sca_can_add_vcpu(struct kvm *kvm, unsigned int id)
 	return rc == 0 && id < KVM_S390_ESCA_CPU_SLOTS;
 }
 
-int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu)
-{
-	vcpu->arch.pfault_token = KVM_S390_PFAULT_TOKEN_INVALID;
-	kvm_clear_async_pf_completion_queue(vcpu);
-	vcpu->run->kvm_valid_regs = KVM_SYNC_PREFIX |
-				    KVM_SYNC_GPRS |
-				    KVM_SYNC_ACRS |
-				    KVM_SYNC_CRS |
-				    KVM_SYNC_ARCH0 |
-				    KVM_SYNC_PFAULT;
-	kvm_s390_set_prefix(vcpu, 0);
-	if (test_kvm_facility(vcpu->kvm, 64))
-		vcpu->run->kvm_valid_regs |= KVM_SYNC_RICCB;
-	if (test_kvm_facility(vcpu->kvm, 82))
-		vcpu->run->kvm_valid_regs |= KVM_SYNC_BPBC;
-	if (test_kvm_facility(vcpu->kvm, 133))
-		vcpu->run->kvm_valid_regs |= KVM_SYNC_GSCB;
-	if (test_kvm_facility(vcpu->kvm, 156))
-		vcpu->run->kvm_valid_regs |= KVM_SYNC_ETOKEN;
-	/* fprs can be synchronized via vrs, even if the guest has no vx. With
-	 * MACHINE_HAS_VX, (load|store)_fpu_regs() will work with vrs format.
-	 */
-	if (MACHINE_HAS_VX)
-		vcpu->run->kvm_valid_regs |= KVM_SYNC_VRS;
-	else
-		vcpu->run->kvm_valid_regs |= KVM_SYNC_FPRS;
-
-	if (kvm_is_ucontrol(vcpu->kvm))
-		return __kvm_ucontrol_vcpu_init(vcpu);
-
-	return 0;
-}
-
 /* needs disabled preemption to protect from TOD sync and vcpu_load/put */
 static void __start_cpu_timer_accounting(struct kvm_vcpu *vcpu)
 {
@@ -2844,35 +2809,6 @@ void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)
 
 }
 
-static void kvm_s390_vcpu_initial_reset(struct kvm_vcpu *vcpu)
-{
-	/* this equals initial cpu reset in pop, but we don't switch to ESA */
-	vcpu->arch.sie_block->gpsw.mask = 0UL;
-	vcpu->arch.sie_block->gpsw.addr = 0UL;
-	kvm_s390_set_prefix(vcpu, 0);
-	kvm_s390_set_cpu_timer(vcpu, 0);
-	vcpu->arch.sie_block->ckc       = 0UL;
-	vcpu->arch.sie_block->todpr     = 0;
-	memset(vcpu->arch.sie_block->gcr, 0, 16 * sizeof(__u64));
-	vcpu->arch.sie_block->gcr[0]  = CR0_UNUSED_56 |
-					CR0_INTERRUPT_KEY_SUBMASK |
-					CR0_MEASUREMENT_ALERT_SUBMASK;
-	vcpu->arch.sie_block->gcr[14] = CR14_UNUSED_32 |
-					CR14_UNUSED_33 |
-					CR14_EXTERNAL_DAMAGE_SUBMASK;
-	/* make sure the new fpc will be lazily loaded */
-	save_fpu_regs();
-	current->thread.fpu.fpc = 0;
-	vcpu->arch.sie_block->gbea = 1;
-	vcpu->arch.sie_block->pp = 0;
-	vcpu->arch.sie_block->fpf &= ~FPF_BPBC;
-	vcpu->arch.pfault_token = KVM_S390_PFAULT_TOKEN_INVALID;
-	kvm_clear_async_pf_completion_queue(vcpu);
-	if (!kvm_s390_user_cpu_state_ctrl(vcpu->kvm))
-		kvm_s390_vcpu_stop(vcpu);
-	kvm_s390_clear_local_irqs(vcpu);
-}
-
 void kvm_arch_vcpu_postcreate(struct kvm_vcpu *vcpu)
 {
 	mutex_lock(&vcpu->kvm->lock);
@@ -2962,7 +2898,7 @@ static void kvm_s390_vcpu_setup_model(struct kvm_vcpu *vcpu)
 		vcpu->arch.sie_block->fac = (u32)(u64) model->fac_list;
 }
 
-int kvm_arch_vcpu_setup(struct kvm_vcpu *vcpu)
+static int kvm_s390_vcpu_setup(struct kvm_vcpu *vcpu)
 {
 	int rc = 0;
 
@@ -3035,26 +2971,22 @@ int kvm_arch_vcpu_setup(struct kvm_vcpu *vcpu)
 	return rc;
 }
 
-struct kvm_vcpu *kvm_arch_vcpu_create(struct kvm *kvm,
-				      unsigned int id)
+int kvm_arch_vcpu_precreate(struct kvm *kvm, unsigned int id)
 {
-	struct kvm_vcpu *vcpu;
-	struct sie_page *sie_page;
-	int rc = -EINVAL;
-
 	if (!kvm_is_ucontrol(kvm) && !sca_can_add_vcpu(kvm, id))
-		goto out;
-
-	rc = -ENOMEM;
+		return -EINVAL;
+	return 0;
+}
 
-	vcpu = kmem_cache_zalloc(kvm_vcpu_cache, GFP_KERNEL);
-	if (!vcpu)
-		goto out;
+int kvm_arch_vcpu_create(struct kvm_vcpu *vcpu)
+{
+	struct sie_page *sie_page;
+	int rc;
 
 	BUILD_BUG_ON(sizeof(struct sie_page) != 4096);
 	sie_page = (struct sie_page *) get_zeroed_page(GFP_KERNEL);
 	if (!sie_page)
-		goto out_free_cpu;
+		return -ENOMEM;
 
 	vcpu->arch.sie_block = &sie_page->sie_block;
 	vcpu->arch.sie_block->itdba = (unsigned long) &sie_page->itdb;
@@ -3063,27 +2995,59 @@ struct kvm_vcpu *kvm_arch_vcpu_create(struct kvm *kvm,
 	vcpu->arch.sie_block->mso = 0;
 	vcpu->arch.sie_block->msl = sclp.hamax;
 
-	vcpu->arch.sie_block->icpua = id;
+	vcpu->arch.sie_block->icpua = vcpu->vcpu_id;
 	spin_lock_init(&vcpu->arch.local_int.lock);
-	vcpu->arch.sie_block->gd = (u32)(u64)kvm->arch.gisa_int.origin;
+	vcpu->arch.sie_block->gd = (u32)(u64)vcpu->kvm->arch.gisa_int.origin;
 	if (vcpu->arch.sie_block->gd && sclp.has_gisaf)
 		vcpu->arch.sie_block->gd |= GISA_FORMAT1;
 	seqcount_init(&vcpu->arch.cputm_seqcount);
 
-	rc = kvm_vcpu_init(vcpu, kvm, id);
+	vcpu->arch.pfault_token = KVM_S390_PFAULT_TOKEN_INVALID;
+	kvm_clear_async_pf_completion_queue(vcpu);
+	vcpu->run->kvm_valid_regs = KVM_SYNC_PREFIX |
+				    KVM_SYNC_GPRS |
+				    KVM_SYNC_ACRS |
+				    KVM_SYNC_CRS |
+				    KVM_SYNC_ARCH0 |
+				    KVM_SYNC_PFAULT;
+	kvm_s390_set_prefix(vcpu, 0);
+	if (test_kvm_facility(vcpu->kvm, 64))
+		vcpu->run->kvm_valid_regs |= KVM_SYNC_RICCB;
+	if (test_kvm_facility(vcpu->kvm, 82))
+		vcpu->run->kvm_valid_regs |= KVM_SYNC_BPBC;
+	if (test_kvm_facility(vcpu->kvm, 133))
+		vcpu->run->kvm_valid_regs |= KVM_SYNC_GSCB;
+	if (test_kvm_facility(vcpu->kvm, 156))
+		vcpu->run->kvm_valid_regs |= KVM_SYNC_ETOKEN;
+	/* fprs can be synchronized via vrs, even if the guest has no vx. With
+	 * MACHINE_HAS_VX, (load|store)_fpu_regs() will work with vrs format.
+	 */
+	if (MACHINE_HAS_VX)
+		vcpu->run->kvm_valid_regs |= KVM_SYNC_VRS;
+	else
+		vcpu->run->kvm_valid_regs |= KVM_SYNC_FPRS;
+
+	if (kvm_is_ucontrol(vcpu->kvm)) {
+		rc = __kvm_ucontrol_vcpu_init(vcpu);
+		if (rc)
+			goto out_free_sie_block;
+	}
+
+	VM_EVENT(vcpu->kvm, 3, "create cpu %d at 0x%pK, sie block at 0x%pK",
+		 vcpu->vcpu_id, vcpu, vcpu->arch.sie_block);
+	trace_kvm_s390_create_vcpu(vcpu->vcpu_id, vcpu, vcpu->arch.sie_block);
+
+	rc = kvm_s390_vcpu_setup(vcpu);
 	if (rc)
-		goto out_free_sie_block;
-	VM_EVENT(kvm, 3, "create cpu %d at 0x%pK, sie block at 0x%pK", id, vcpu,
-		 vcpu->arch.sie_block);
-	trace_kvm_s390_create_vcpu(id, vcpu, vcpu->arch.sie_block);
+		goto out_ucontrol_uninit;
+	return 0;
 
-	return vcpu;
+out_ucontrol_uninit:
+	if (kvm_is_ucontrol(vcpu->kvm))
+		gmap_remove(vcpu->arch.gmap);
 out_free_sie_block:
 	free_page((unsigned long)(vcpu->arch.sie_block));
-out_free_cpu:
-	kmem_cache_free(kvm_vcpu_cache, vcpu);
-out:
-	return ERR_PTR(rc);
+	return rc;
 }
 
 int kvm_arch_vcpu_runnable(struct kvm_vcpu *vcpu)
@@ -3287,10 +3251,53 @@ static int kvm_arch_vcpu_ioctl_set_one_reg(struct kvm_vcpu *vcpu,
 	return r;
 }
 
-static int kvm_arch_vcpu_ioctl_initial_reset(struct kvm_vcpu *vcpu)
+static void kvm_arch_vcpu_ioctl_normal_reset(struct kvm_vcpu *vcpu)
 {
-	kvm_s390_vcpu_initial_reset(vcpu);
-	return 0;
+	vcpu->arch.sie_block->gpsw.mask &= ~PSW_MASK_RI;
+	vcpu->arch.pfault_token = KVM_S390_PFAULT_TOKEN_INVALID;
+	memset(vcpu->run->s.regs.riccb, 0, sizeof(vcpu->run->s.regs.riccb));
+
+	kvm_clear_async_pf_completion_queue(vcpu);
+	if (!kvm_s390_user_cpu_state_ctrl(vcpu->kvm))
+		kvm_s390_vcpu_stop(vcpu);
+	kvm_s390_clear_local_irqs(vcpu);
+}
+
+static void kvm_arch_vcpu_ioctl_initial_reset(struct kvm_vcpu *vcpu)
+{
+	/* Initial reset is a superset of the normal reset */
+	kvm_arch_vcpu_ioctl_normal_reset(vcpu);
+
+	/* this equals initial cpu reset in pop, but we don't switch to ESA */
+	vcpu->arch.sie_block->gpsw.mask = 0;
+	vcpu->arch.sie_block->gpsw.addr = 0;
+	kvm_s390_set_prefix(vcpu, 0);
+	kvm_s390_set_cpu_timer(vcpu, 0);
+	vcpu->arch.sie_block->ckc = 0;
+	vcpu->arch.sie_block->todpr = 0;
+	memset(vcpu->arch.sie_block->gcr, 0, sizeof(vcpu->arch.sie_block->gcr));
+	vcpu->arch.sie_block->gcr[0] = CR0_INITIAL_MASK;
+	vcpu->arch.sie_block->gcr[14] = CR14_INITIAL_MASK;
+	vcpu->run->s.regs.fpc = 0;
+	vcpu->arch.sie_block->gbea = 1;
+	vcpu->arch.sie_block->pp = 0;
+	vcpu->arch.sie_block->fpf &= ~FPF_BPBC;
+}
+
+static void kvm_arch_vcpu_ioctl_clear_reset(struct kvm_vcpu *vcpu)
+{
+	struct kvm_sync_regs *regs = &vcpu->run->s.regs;
+
+	/* Clear reset is a superset of the initial reset */
+	kvm_arch_vcpu_ioctl_initial_reset(vcpu);
+
+	memset(&regs->gprs, 0, sizeof(regs->gprs));
+	memset(&regs->vrs, 0, sizeof(regs->vrs));
+	memset(&regs->acrs, 0, sizeof(regs->acrs));
+	memset(&regs->gscb, 0, sizeof(regs->gscb));
+
+	regs->etoken = 0;
+	regs->etoken_extension = 0;
 }
 
 int kvm_arch_vcpu_ioctl_set_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs)
@@ -4351,7 +4358,7 @@ long kvm_arch_vcpu_ioctl(struct file *filp,
 	switch (ioctl) {
 	case KVM_S390_STORE_STATUS:
 		idx = srcu_read_lock(&vcpu->kvm->srcu);
-		r = kvm_s390_vcpu_store_status(vcpu, arg);
+		r = kvm_s390_store_status_unloaded(vcpu, arg);
 		srcu_read_unlock(&vcpu->kvm->srcu, idx);
 		break;
 	case KVM_S390_SET_INITIAL_PSW: {
@@ -4363,8 +4370,17 @@ long kvm_arch_vcpu_ioctl(struct file *filp,
 		r = kvm_arch_vcpu_ioctl_set_initial_psw(vcpu, psw);
 		break;
 	}
+	case KVM_S390_CLEAR_RESET:
+		r = 0;
+		kvm_arch_vcpu_ioctl_clear_reset(vcpu);
+		break;
 	case KVM_S390_INITIAL_RESET:
-		r = kvm_arch_vcpu_ioctl_initial_reset(vcpu);
+		r = 0;
+		kvm_arch_vcpu_ioctl_initial_reset(vcpu);
+		break;
+	case KVM_S390_NORMAL_RESET:
+		r = 0;
+		kvm_arch_vcpu_ioctl_normal_reset(vcpu);
 		break;
 	case KVM_SET_ONE_REG:
 	case KVM_GET_ONE_REG: {
diff --git a/arch/s390/mm/hugetlbpage.c b/arch/s390/mm/hugetlbpage.c
index b0246c705a19..5674710a4841 100644
--- a/arch/s390/mm/hugetlbpage.c
+++ b/arch/s390/mm/hugetlbpage.c
@@ -2,7 +2,7 @@
 /*
  *  IBM System z Huge TLB Page Support for Kernel.
  *
- *    Copyright IBM Corp. 2007,2016
+ *    Copyright IBM Corp. 2007,2020
  *    Author(s): Gerald Schaefer <gerald.schaefer@de.ibm.com>
  */
 
@@ -11,6 +11,9 @@
 
 #include <linux/mm.h>
 #include <linux/hugetlb.h>
+#include <linux/mman.h>
+#include <linux/sched/mm.h>
+#include <linux/security.h>
 
 /*
  * If the bit selected by single-bit bitmask "a" is set within "x", move
@@ -267,3 +270,98 @@ static __init int setup_hugepagesz(char *opt)
 	return 1;
 }
 __setup("hugepagesz=", setup_hugepagesz);
+
+static unsigned long hugetlb_get_unmapped_area_bottomup(struct file *file,
+		unsigned long addr, unsigned long len,
+		unsigned long pgoff, unsigned long flags)
+{
+	struct hstate *h = hstate_file(file);
+	struct vm_unmapped_area_info info;
+
+	info.flags = 0;
+	info.length = len;
+	info.low_limit = current->mm->mmap_base;
+	info.high_limit = TASK_SIZE;
+	info.align_mask = PAGE_MASK & ~huge_page_mask(h);
+	info.align_offset = 0;
+	return vm_unmapped_area(&info);
+}
+
+static unsigned long hugetlb_get_unmapped_area_topdown(struct file *file,
+		unsigned long addr0, unsigned long len,
+		unsigned long pgoff, unsigned long flags)
+{
+	struct hstate *h = hstate_file(file);
+	struct vm_unmapped_area_info info;
+	unsigned long addr;
+
+	info.flags = VM_UNMAPPED_AREA_TOPDOWN;
+	info.length = len;
+	info.low_limit = max(PAGE_SIZE, mmap_min_addr);
+	info.high_limit = current->mm->mmap_base;
+	info.align_mask = PAGE_MASK & ~huge_page_mask(h);
+	info.align_offset = 0;
+	addr = vm_unmapped_area(&info);
+
+	/*
+	 * A failed mmap() very likely causes application failure,
+	 * so fall back to the bottom-up function here. This scenario
+	 * can happen with large stack limits and large mmap()
+	 * allocations.
+	 */
+	if (addr & ~PAGE_MASK) {
+		VM_BUG_ON(addr != -ENOMEM);
+		info.flags = 0;
+		info.low_limit = TASK_UNMAPPED_BASE;
+		info.high_limit = TASK_SIZE;
+		addr = vm_unmapped_area(&info);
+	}
+
+	return addr;
+}
+
+unsigned long hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
+		unsigned long len, unsigned long pgoff, unsigned long flags)
+{
+	struct hstate *h = hstate_file(file);
+	struct mm_struct *mm = current->mm;
+	struct vm_area_struct *vma;
+	int rc;
+
+	if (len & ~huge_page_mask(h))
+		return -EINVAL;
+	if (len > TASK_SIZE - mmap_min_addr)
+		return -ENOMEM;
+
+	if (flags & MAP_FIXED) {
+		if (prepare_hugepage_range(file, addr, len))
+			return -EINVAL;
+		goto check_asce_limit;
+	}
+
+	if (addr) {
+		addr = ALIGN(addr, huge_page_size(h));
+		vma = find_vma(mm, addr);
+		if (TASK_SIZE - len >= addr && addr >= mmap_min_addr &&
+		    (!vma || addr + len <= vm_start_gap(vma)))
+			goto check_asce_limit;
+	}
+
+	if (mm->get_unmapped_area == arch_get_unmapped_area)
+		addr = hugetlb_get_unmapped_area_bottomup(file, addr, len,
+				pgoff, flags);
+	else
+		addr = hugetlb_get_unmapped_area_topdown(file, addr, len,
+				pgoff, flags);
+	if (addr & ~PAGE_MASK)
+		return addr;
+
+check_asce_limit:
+	if (addr + len > current->mm->context.asce_limit &&
+	    addr + len <= TASK_SIZE) {
+		rc = crst_table_upgrade(mm, addr + len);
+		if (rc)
+			return (unsigned long) rc;
+	}
+	return addr;
+}
diff --git a/arch/sh/include/cpu-sh2a/cpu/sh7264.h b/arch/sh/include/cpu-sh2a/cpu/sh7264.h
index d12c19186845..8a1338aaf10a 100644
--- a/arch/sh/include/cpu-sh2a/cpu/sh7264.h
+++ b/arch/sh/include/cpu-sh2a/cpu/sh7264.h
@@ -112,12 +112,6 @@ enum {
 	GPIO_FN_TIOC0D, GPIO_FN_TIOC0C, GPIO_FN_TIOC0B, GPIO_FN_TIOC0A,
 	GPIO_FN_TCLKD, GPIO_FN_TCLKC, GPIO_FN_TCLKB, GPIO_FN_TCLKA,
 
-	/* SSU */
-	GPIO_FN_SCS0_PD, GPIO_FN_SSO0_PD, GPIO_FN_SSI0_PD, GPIO_FN_SSCK0_PD,
-	GPIO_FN_SCS0_PF, GPIO_FN_SSO0_PF, GPIO_FN_SSI0_PF, GPIO_FN_SSCK0_PF,
-	GPIO_FN_SCS1_PD, GPIO_FN_SSO1_PD, GPIO_FN_SSI1_PD, GPIO_FN_SSCK1_PD,
-	GPIO_FN_SCS1_PF, GPIO_FN_SSO1_PF, GPIO_FN_SSI1_PF, GPIO_FN_SSCK1_PF,
-
 	/* SCIF */
 	GPIO_FN_SCK0, GPIO_FN_SCK1, GPIO_FN_SCK2, GPIO_FN_SCK3,
 	GPIO_FN_RXD0, GPIO_FN_RXD1, GPIO_FN_RXD2, GPIO_FN_RXD3,
diff --git a/arch/sh/include/cpu-sh2a/cpu/sh7269.h b/arch/sh/include/cpu-sh2a/cpu/sh7269.h
index d516e5d48818..fece521c74b3 100644
--- a/arch/sh/include/cpu-sh2a/cpu/sh7269.h
+++ b/arch/sh/include/cpu-sh2a/cpu/sh7269.h
@@ -78,8 +78,15 @@ enum {
 	GPIO_FN_WDTOVF,
 
 	/* CAN */
-	GPIO_FN_CTX1, GPIO_FN_CRX1, GPIO_FN_CTX0, GPIO_FN_CTX0_CTX1,
-	GPIO_FN_CRX0, GPIO_FN_CRX0_CRX1, GPIO_FN_CRX0_CRX1_CRX2,
+	GPIO_FN_CTX2, GPIO_FN_CRX2,
+	GPIO_FN_CTX1, GPIO_FN_CRX1,
+	GPIO_FN_CTX0, GPIO_FN_CRX0,
+	GPIO_FN_CTX0_CTX1, GPIO_FN_CRX0_CRX1,
+	GPIO_FN_CTX0_CTX1_CTX2, GPIO_FN_CRX0_CRX1_CRX2,
+	GPIO_FN_CTX2_PJ21, GPIO_FN_CRX2_PJ20,
+	GPIO_FN_CTX1_PJ23, GPIO_FN_CRX1_PJ22,
+	GPIO_FN_CTX0_CTX1_PJ23, GPIO_FN_CRX0_CRX1_PJ22,
+	GPIO_FN_CTX0_CTX1_CTX2_PJ21, GPIO_FN_CRX0_CRX1_CRX2_PJ20,
 
 	/* DMAC */
 	GPIO_FN_TEND0, GPIO_FN_DACK0, GPIO_FN_DREQ0,
@@ -119,12 +126,6 @@ enum {
 	GPIO_FN_TIOC0D, GPIO_FN_TIOC0C, GPIO_FN_TIOC0B, GPIO_FN_TIOC0A,
 	GPIO_FN_TCLKD, GPIO_FN_TCLKC, GPIO_FN_TCLKB, GPIO_FN_TCLKA,
 
-	/* SSU */
-	GPIO_FN_SCS0_PD, GPIO_FN_SSO0_PD, GPIO_FN_SSI0_PD, GPIO_FN_SSCK0_PD,
-	GPIO_FN_SCS0_PF, GPIO_FN_SSO0_PF, GPIO_FN_SSI0_PF, GPIO_FN_SSCK0_PF,
-	GPIO_FN_SCS1_PD, GPIO_FN_SSO1_PD, GPIO_FN_SSI1_PD, GPIO_FN_SSCK1_PD,
-	GPIO_FN_SCS1_PF, GPIO_FN_SSO1_PF, GPIO_FN_SSI1_PF, GPIO_FN_SSCK1_PF,
-
 	/* SCIF */
 	GPIO_FN_SCK0, GPIO_FN_RXD0, GPIO_FN_TXD0,
 	GPIO_FN_SCK1, GPIO_FN_RXD1, GPIO_FN_TXD1, GPIO_FN_RTS1, GPIO_FN_CTS1,
diff --git a/arch/sh/include/uapi/asm/sockios.h b/arch/sh/include/uapi/asm/sockios.h
index ef18a668456d..3da561453260 100644
--- a/arch/sh/include/uapi/asm/sockios.h
+++ b/arch/sh/include/uapi/asm/sockios.h
@@ -10,7 +10,7 @@
 #define SIOCSPGRP	_IOW('s', 8, pid_t)
 #define SIOCGPGRP	_IOR('s', 9, pid_t)
 
-#define SIOCGSTAMP_OLD	_IOR('s', 100, struct timeval) /* Get stamp (timeval) */
-#define SIOCGSTAMPNS_OLD _IOR('s', 101, struct timespec) /* Get stamp (timespec) */
+#define SIOCGSTAMP_OLD	_IOR('s', 100, struct __kernel_old_timeval) /* Get stamp (timeval) */
+#define SIOCGSTAMPNS_OLD _IOR('s', 101, struct __kernel_old_timespec) /* Get stamp (timespec) */
 
 #endif /* __ASM_SH_SOCKIOS_H */
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index d232cfa01877..67f5a3b44c2e 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -341,10 +341,6 @@ void __init setup_arch(char **cmdline_p)
 
 	paging_init();
 
-#ifdef CONFIG_DUMMY_CONSOLE
-	conswitchp = &dummy_con;
-#endif
-
 	/* Perform the machine specific initialisation */
 	if (likely(sh_mv.mv_setup))
 		sh_mv.mv_setup(cmdline_p);
diff --git a/arch/sh/kernel/syscalls/syscall.tbl b/arch/sh/kernel/syscalls/syscall.tbl
index b5ed26c4c005..c7a30fcd135f 100644
--- a/arch/sh/kernel/syscalls/syscall.tbl
+++ b/arch/sh/kernel/syscalls/syscall.tbl
@@ -438,3 +438,5 @@
 433	common	fspick				sys_fspick
 434	common	pidfd_open			sys_pidfd_open
 # 435 reserved for clone3
+437	common	openat2				sys_openat2
+438	common	pidfd_getfd			sys_pidfd_getfd
diff --git a/arch/sh/mm/alignment.c b/arch/sh/mm/alignment.c
index ec2b25302427..fb517b82a87b 100644
--- a/arch/sh/mm/alignment.c
+++ b/arch/sh/mm/alignment.c
@@ -152,13 +152,12 @@ static ssize_t alignment_proc_write(struct file *file,
 	return count;
 }
 
-static const struct file_operations alignment_proc_fops = {
-	.owner		= THIS_MODULE,
-	.open		= alignment_proc_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-	.write		= alignment_proc_write,
+static const struct proc_ops alignment_proc_ops = {
+	.proc_open	= alignment_proc_open,
+	.proc_read	= seq_read,
+	.proc_lseek	= seq_lseek,
+	.proc_release	= single_release,
+	.proc_write	= alignment_proc_write,
 };
 
 /*
@@ -176,12 +175,12 @@ static int __init alignment_init(void)
 		return -ENOMEM;
 
 	res = proc_create_data("alignment", S_IWUSR | S_IRUGO, dir,
-			       &alignment_proc_fops, &se_usermode);
+			       &alignment_proc_ops, &se_usermode);
 	if (!res)
 		return -ENOMEM;
 
         res = proc_create_data("kernel_alignment", S_IWUSR | S_IRUGO, dir,
-			       &alignment_proc_fops, &se_kernmode_warn);
+			       &alignment_proc_ops, &se_kernmode_warn);
         if (!res)
                 return -ENOMEM;
 
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index e8c3ea01c12f..c1dd6dd642f4 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -64,8 +64,7 @@ config SPARC64
 	select HAVE_FUNCTION_GRAPH_TRACER
 	select HAVE_KRETPROBES
 	select HAVE_KPROBES
-	select HAVE_RCU_TABLE_FREE if SMP
-	select HAVE_RCU_TABLE_NO_INVALIDATE if HAVE_RCU_TABLE_FREE
+	select MMU_GATHER_RCU_TABLE_FREE if SMP
 	select HAVE_MEMBLOCK_NODE_MAP
 	select HAVE_ARCH_TRANSPARENT_HUGEPAGE
 	select HAVE_DYNAMIC_FTRACE
diff --git a/arch/sparc/include/asm/compat.h b/arch/sparc/include/asm/compat.h
index 30b1763580b1..40a267b3bd52 100644
--- a/arch/sparc/include/asm/compat.h
+++ b/arch/sparc/include/asm/compat.h
@@ -125,23 +125,6 @@ typedef u32		compat_sigset_word;
 
 #define COMPAT_OFF_T_MAX	0x7fffffff
 
-/*
- * A pointer passed in from user mode. This should not
- * be used for syscall parameters, just declare them
- * as pointers because the syscall entry code will have
- * appropriately converted them already.
- */
-
-static inline void __user *compat_ptr(compat_uptr_t uptr)
-{
-	return (void __user *)(unsigned long)uptr;
-}
-
-static inline compat_uptr_t ptr_to_compat(void __user *uptr)
-{
-	return (u32)(unsigned long)uptr;
-}
-
 #ifdef CONFIG_COMPAT
 static inline void __user *arch_compat_alloc_user_space(long len)
 {
diff --git a/arch/sparc/include/asm/pgalloc_64.h b/arch/sparc/include/asm/pgalloc_64.h
index 9d3e5cc95bbb..264e76ceccf6 100644
--- a/arch/sparc/include/asm/pgalloc_64.h
+++ b/arch/sparc/include/asm/pgalloc_64.h
@@ -16,12 +16,12 @@
 
 extern struct kmem_cache *pgtable_cache;
 
-static inline void __pgd_populate(pgd_t *pgd, pud_t *pud)
+static inline void __p4d_populate(p4d_t *p4d, pud_t *pud)
 {
-	pgd_set(pgd, pud);
+	p4d_set(p4d, pud);
 }
 
-#define pgd_populate(MM, PGD, PUD)	__pgd_populate(PGD, PUD)
+#define p4d_populate(MM, P4D, PUD)	__p4d_populate(P4D, PUD)
 
 static inline pgd_t *pgd_alloc(struct mm_struct *mm)
 {
diff --git a/arch/sparc/include/asm/pgtable_64.h b/arch/sparc/include/asm/pgtable_64.h
index 6ae8016ef4ec..65494c3a420e 100644
--- a/arch/sparc/include/asm/pgtable_64.h
+++ b/arch/sparc/include/asm/pgtable_64.h
@@ -13,7 +13,7 @@
  * the SpitFire page tables.
  */
 
-#include <asm-generic/5level-fixup.h>
+#include <asm-generic/pgtable-nop4d.h>
 #include <linux/compiler.h>
 #include <linux/const.h>
 #include <asm/types.h>
@@ -683,6 +683,7 @@ static inline unsigned long pte_special(pte_t pte)
 	return pte_val(pte) & _PAGE_SPECIAL;
 }
 
+#define pmd_leaf	pmd_large
 static inline unsigned long pmd_large(pmd_t pmd)
 {
 	pte_t pte = __pte(pmd_val(pmd));
@@ -810,9 +811,9 @@ static inline int pmd_present(pmd_t pmd)
 
 #define pud_bad(pud)			(pud_val(pud) & ~PAGE_MASK)
 
-#define pgd_none(pgd)			(!pgd_val(pgd))
+#define p4d_none(p4d)			(!p4d_val(p4d))
 
-#define pgd_bad(pgd)			(pgd_val(pgd) & ~PAGE_MASK)
+#define p4d_bad(p4d)			(p4d_val(p4d) & ~PAGE_MASK)
 
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
 void set_pmd_at(struct mm_struct *mm, unsigned long addr,
@@ -859,14 +860,15 @@ static inline unsigned long pud_page_vaddr(pud_t pud)
 #define pmd_clear(pmdp)			(pmd_val(*(pmdp)) = 0UL)
 #define pud_present(pud)		(pud_val(pud) != 0U)
 #define pud_clear(pudp)			(pud_val(*(pudp)) = 0UL)
-#define pgd_page_vaddr(pgd)		\
-	((unsigned long) __va(pgd_val(pgd)))
-#define pgd_present(pgd)		(pgd_val(pgd) != 0U)
-#define pgd_clear(pgdp)			(pgd_val(*(pgdp)) = 0UL)
+#define p4d_page_vaddr(p4d)		\
+	((unsigned long) __va(p4d_val(p4d)))
+#define p4d_present(p4d)		(p4d_val(p4d) != 0U)
+#define p4d_clear(p4dp)			(p4d_val(*(p4dp)) = 0UL)
 
 /* only used by the stubbed out hugetlb gup code, should never be called */
-#define pgd_page(pgd)			NULL
+#define p4d_page(p4d)			NULL
 
+#define pud_leaf	pud_large
 static inline unsigned long pud_large(pud_t pud)
 {
 	pte_t pte = __pte(pud_val(pud));
@@ -884,8 +886,8 @@ static inline unsigned long pud_pfn(pud_t pud)
 /* Same in both SUN4V and SUN4U.  */
 #define pte_none(pte) 			(!pte_val(pte))
 
-#define pgd_set(pgdp, pudp)	\
-	(pgd_val(*(pgdp)) = (__pa((unsigned long) (pudp))))
+#define p4d_set(p4dp, pudp)	\
+	(p4d_val(*(p4dp)) = (__pa((unsigned long) (pudp))))
 
 /* to find an entry in a page-table-directory. */
 #define pgd_index(address)	(((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD - 1))
@@ -896,8 +898,8 @@ static inline unsigned long pud_pfn(pud_t pud)
 
 /* Find an entry in the third-level page table.. */
 #define pud_index(address)	(((address) >> PUD_SHIFT) & (PTRS_PER_PUD - 1))
-#define pud_offset(pgdp, address)	\
-	((pud_t *) pgd_page_vaddr(*(pgdp)) + pud_index(address))
+#define pud_offset(p4dp, address)	\
+	((pud_t *) p4d_page_vaddr(*(p4dp)) + pud_index(address))
 
 /* Find an entry in the second-level page table.. */
 #define pmd_offset(pudp, address)	\
diff --git a/arch/sparc/include/asm/tlb_64.h b/arch/sparc/include/asm/tlb_64.h
index a2f3fa61ee36..6820d357581c 100644
--- a/arch/sparc/include/asm/tlb_64.h
+++ b/arch/sparc/include/asm/tlb_64.h
@@ -28,6 +28,15 @@ void flush_tlb_pending(void);
 #define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0)
 #define tlb_flush(tlb)	flush_tlb_pending()
 
+/*
+ * SPARC64's hardware TLB fill does not use the Linux page-tables
+ * and therefore we don't need a TLBI when freeing page-table pages.
+ */
+
+#ifdef CONFIG_MMU_GATHER_RCU_TABLE_FREE
+#define tlb_needs_table_invalidate()	(false)
+#endif
+
 #include <asm-generic/tlb.h>
 
 #endif /* _SPARC64_TLB_H */
diff --git a/arch/sparc/include/uapi/asm/ipcbuf.h b/arch/sparc/include/uapi/asm/ipcbuf.h
index 5b933a598a33..0ea1240d2ea1 100644
--- a/arch/sparc/include/uapi/asm/ipcbuf.h
+++ b/arch/sparc/include/uapi/asm/ipcbuf.h
@@ -17,19 +17,19 @@
 
 struct ipc64_perm
 {
-	__kernel_key_t	key;
-	__kernel_uid_t	uid;
-	__kernel_gid_t	gid;
-	__kernel_uid_t	cuid;
-	__kernel_gid_t	cgid;
+	__kernel_key_t		key;
+	__kernel_uid32_t	uid;
+	__kernel_gid32_t	gid;
+	__kernel_uid32_t	cuid;
+	__kernel_gid32_t	cgid;
 #ifndef __arch64__
-	unsigned short	__pad0;
+	unsigned short		__pad0;
 #endif
-	__kernel_mode_t	mode;
-	unsigned short	__pad1;
-	unsigned short	seq;
-	unsigned long long __unused1;
-	unsigned long long __unused2;
+	__kernel_mode_t		mode;
+	unsigned short		__pad1;
+	unsigned short		seq;
+	unsigned long long	__unused1;
+	unsigned long long	__unused2;
 };
 
 #endif /* __SPARC_IPCBUF_H */
diff --git a/arch/sparc/include/uapi/asm/statfs.h b/arch/sparc/include/uapi/asm/statfs.h
deleted file mode 100644
index 20c8f5bd340e..000000000000
--- a/arch/sparc/include/uapi/asm/statfs.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-#ifndef ___ASM_SPARC_STATFS_H
-#define ___ASM_SPARC_STATFS_H
-
-#include <asm-generic/statfs.h>
-
-#endif
diff --git a/arch/sparc/kernel/led.c b/arch/sparc/kernel/led.c
index a6292f8ed180..bd48575172c3 100644
--- a/arch/sparc/kernel/led.c
+++ b/arch/sparc/kernel/led.c
@@ -104,13 +104,12 @@ static ssize_t led_proc_write(struct file *file, const char __user *buffer,
 	return count;
 }
 
-static const struct file_operations led_proc_fops = {
-	.owner		= THIS_MODULE,
-	.open		= led_proc_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-	.write		= led_proc_write,
+static const struct proc_ops led_proc_ops = {
+	.proc_open	= led_proc_open,
+	.proc_read	= seq_read,
+	.proc_lseek	= seq_lseek,
+	.proc_release	= single_release,
+	.proc_write	= led_proc_write,
 };
 
 static struct proc_dir_entry *led;
@@ -121,7 +120,7 @@ static int __init led_init(void)
 {
 	timer_setup(&led_blink_timer, led_blink, 0);
 
-	led = proc_create("led", 0, NULL, &led_proc_fops);
+	led = proc_create("led", 0, NULL, &led_proc_ops);
 	if (!led)
 		return -ENOMEM;
 
diff --git a/arch/sparc/kernel/prom_32.c b/arch/sparc/kernel/prom_32.c
index ec244d1022ce..da8902295c8c 100644
--- a/arch/sparc/kernel/prom_32.c
+++ b/arch/sparc/kernel/prom_32.c
@@ -132,12 +132,13 @@ static void __init ebus_path_component(struct device_node *dp, char *tmp_buf)
 		regs->which_io, regs->phys_addr);
 }
 
-/* "name:vendor:device@irq,addrlo" */
+/* "name@irq,addrlo" */
 static void __init ambapp_path_component(struct device_node *dp, char *tmp_buf)
 {
 	const char *name = of_get_property(dp, "name", NULL);
 	struct amba_prom_registers *regs;
-	unsigned int *intr, *device, *vendor, reg0;
+	unsigned int *intr;
+	unsigned int reg0;
 	struct property *prop;
 	int interrupt = 0;
 
@@ -159,18 +160,7 @@ static void __init ambapp_path_component(struct device_node *dp, char *tmp_buf)
 	else
 		intr = prop->value;
 
-	prop = of_find_property(dp, "vendor", NULL);
-	if (!prop)
-		return;
-	vendor = prop->value;
-	prop = of_find_property(dp, "device", NULL);
-	if (!prop)
-		return;
-	device = prop->value;
-
-	sprintf(tmp_buf, "%s:%d:%d@%x,%x",
-		name, *vendor, *device,
-		*intr, reg0);
+	sprintf(tmp_buf, "%s@%x,%x", name, *intr, reg0);
 }
 
 static void __init __build_path_component(struct device_node *dp, char *tmp_buf)
diff --git a/arch/sparc/kernel/setup_32.c b/arch/sparc/kernel/setup_32.c
index afe1592a6d08..5d1bcfce05d8 100644
--- a/arch/sparc/kernel/setup_32.c
+++ b/arch/sparc/kernel/setup_32.c
@@ -332,10 +332,6 @@ void __init setup_arch(char **cmdline_p)
 		break;
 	}
 
-#ifdef CONFIG_DUMMY_CONSOLE
-	conswitchp = &dummy_con;
-#endif
-
 	idprom_init();
 	load_mmu();
 
diff --git a/arch/sparc/kernel/setup_64.c b/arch/sparc/kernel/setup_64.c
index fd2182a5c32d..75e3992203b6 100644
--- a/arch/sparc/kernel/setup_64.c
+++ b/arch/sparc/kernel/setup_64.c
@@ -653,10 +653,6 @@ void __init setup_arch(char **cmdline_p)
 	else
 		pr_info("ARCH: SUN4U\n");
 
-#ifdef CONFIG_DUMMY_CONSOLE
-	conswitchp = &dummy_con;
-#endif
-
 	idprom_init();
 
 	if (!root_flags)
diff --git a/arch/sparc/kernel/signal32.c b/arch/sparc/kernel/signal32.c
index a237810aa9f4..2a734ecd0a40 100644
--- a/arch/sparc/kernel/signal32.c
+++ b/arch/sparc/kernel/signal32.c
@@ -299,6 +299,7 @@ static void flush_signal_insns(unsigned long address)
 	unsigned long pstate, paddr;
 	pte_t *ptep, pte;
 	pgd_t *pgdp;
+	p4d_t *p4dp;
 	pud_t *pudp;
 	pmd_t *pmdp;
 
@@ -318,7 +319,10 @@ static void flush_signal_insns(unsigned long address)
 	pgdp = pgd_offset(current->mm, address);
 	if (pgd_none(*pgdp))
 		goto out_irqs_on;
-	pudp = pud_offset(pgdp, address);
+	p4dp = p4d_offset(pgdp, address);
+	if (p4d_none(*p4dp))
+		goto out_irqs_on;
+	pudp = pud_offset(p4dp, address);
 	if (pud_none(*pudp))
 		goto out_irqs_on;
 	pmdp = pmd_offset(pudp, address);
diff --git a/arch/sparc/kernel/smp_64.c b/arch/sparc/kernel/smp_64.c
index 9b4506373353..80f20b3808ee 100644
--- a/arch/sparc/kernel/smp_64.c
+++ b/arch/sparc/kernel/smp_64.c
@@ -1621,6 +1621,7 @@ static int __init pcpu_cpu_distance(unsigned int from, unsigned int to)
 static void __init pcpu_populate_pte(unsigned long addr)
 {
 	pgd_t *pgd = pgd_offset_k(addr);
+	p4d_t *p4d;
 	pud_t *pud;
 	pmd_t *pmd;
 
@@ -1633,7 +1634,17 @@ static void __init pcpu_populate_pte(unsigned long addr)
 		pgd_populate(&init_mm, pgd, new);
 	}
 
-	pud = pud_offset(pgd, addr);
+	p4d = p4d_offset(pgd, addr);
+	if (p4d_none(*p4d)) {
+		pud_t *new;
+
+		new = memblock_alloc_from(PAGE_SIZE, PAGE_SIZE, PAGE_SIZE);
+		if (!new)
+			goto err_alloc;
+		p4d_populate(&init_mm, p4d, new);
+	}
+
+	pud = pud_offset(p4d, addr);
 	if (pud_none(*pud)) {
 		pmd_t *new;
 
diff --git a/arch/sparc/kernel/sys_sparc_64.c b/arch/sparc/kernel/sys_sparc_64.c
index 9f41a6f5a032..6b92fadb6ec7 100644
--- a/arch/sparc/kernel/sys_sparc_64.c
+++ b/arch/sparc/kernel/sys_sparc_64.c
@@ -548,34 +548,35 @@ out_unlock:
 	return err;
 }
 
-SYSCALL_DEFINE1(sparc_adjtimex, struct timex __user *, txc_p)
+SYSCALL_DEFINE1(sparc_adjtimex, struct __kernel_timex __user *, txc_p)
 {
-	struct timex txc;		/* Local copy of parameter */
-	struct __kernel_timex *kt = (void *)&txc;
+	struct __kernel_timex txc;
+	struct __kernel_old_timeval *tv = (void *)&txc.time;
 	int ret;
 
 	/* Copy the user data space into the kernel copy
 	 * structure. But bear in mind that the structures
 	 * may change
 	 */
-	if (copy_from_user(&txc, txc_p, sizeof(struct timex)))
+	if (copy_from_user(&txc, txc_p, sizeof(txc)))
 		return -EFAULT;
 
 	/*
 	 * override for sparc64 specific timeval type: tv_usec
 	 * is 32 bit wide instead of 64-bit in __kernel_timex
 	 */
-	kt->time.tv_usec = txc.time.tv_usec;
-	ret = do_adjtimex(kt);
-	txc.time.tv_usec = kt->time.tv_usec;
+	txc.time.tv_usec = tv->tv_usec;
+	ret = do_adjtimex(&txc);
+	tv->tv_usec = txc.time.tv_usec;
 
-	return copy_to_user(txc_p, &txc, sizeof(struct timex)) ? -EFAULT : ret;
+	return copy_to_user(txc_p, &txc, sizeof(txc)) ? -EFAULT : ret;
 }
 
-SYSCALL_DEFINE2(sparc_clock_adjtime, const clockid_t, which_clock,struct timex __user *, txc_p)
+SYSCALL_DEFINE2(sparc_clock_adjtime, const clockid_t, which_clock,
+		struct __kernel_timex __user *, txc_p)
 {
-	struct timex txc;		/* Local copy of parameter */
-	struct __kernel_timex *kt = (void *)&txc;
+	struct __kernel_timex txc;
+	struct __kernel_old_timeval *tv = (void *)&txc.time;
 	int ret;
 
 	if (!IS_ENABLED(CONFIG_POSIX_TIMERS)) {
@@ -590,18 +591,18 @@ SYSCALL_DEFINE2(sparc_clock_adjtime, const clockid_t, which_clock,struct timex _
 	 * structure. But bear in mind that the structures
 	 * may change
 	 */
-	if (copy_from_user(&txc, txc_p, sizeof(struct timex)))
+	if (copy_from_user(&txc, txc_p, sizeof(txc)))
 		return -EFAULT;
 
 	/*
 	 * override for sparc64 specific timeval type: tv_usec
 	 * is 32 bit wide instead of 64-bit in __kernel_timex
 	 */
-	kt->time.tv_usec = txc.time.tv_usec;
-	ret = do_clock_adjtime(which_clock, kt);
-	txc.time.tv_usec = kt->time.tv_usec;
+	txc.time.tv_usec = tv->tv_usec;
+	ret = do_clock_adjtime(which_clock, &txc);
+	tv->tv_usec = txc.time.tv_usec;
 
-	return copy_to_user(txc_p, &txc, sizeof(struct timex)) ? -EFAULT : ret;
+	return copy_to_user(txc_p, &txc, sizeof(txc)) ? -EFAULT : ret;
 }
 
 SYSCALL_DEFINE5(utrap_install, utrap_entry_t, type,
diff --git a/arch/sparc/kernel/syscalls/syscall.tbl b/arch/sparc/kernel/syscalls/syscall.tbl
index 8c8cc7537fb2..f13615ecdecc 100644
--- a/arch/sparc/kernel/syscalls/syscall.tbl
+++ b/arch/sparc/kernel/syscalls/syscall.tbl
@@ -481,3 +481,5 @@
 433	common	fspick				sys_fspick
 434	common	pidfd_open			sys_pidfd_open
 # 435 reserved for clone3
+437	common	openat2			sys_openat2
+438	common	pidfd_getfd			sys_pidfd_getfd
diff --git a/arch/sparc/kernel/vmlinux.lds.S b/arch/sparc/kernel/vmlinux.lds.S
index 7ec79918b566..f99e99e58075 100644
--- a/arch/sparc/kernel/vmlinux.lds.S
+++ b/arch/sparc/kernel/vmlinux.lds.S
@@ -171,12 +171,14 @@ SECTIONS
 	}
 	PERCPU_SECTION(SMP_CACHE_BYTES)
 
-#ifdef CONFIG_JUMP_LABEL
 	. = ALIGN(PAGE_SIZE);
 	.exit.text : {
 		EXIT_TEXT
 	}
-#endif
+
+	.exit.data : {
+		EXIT_DATA
+	}
 
 	. = ALIGN(PAGE_SIZE);
 	__init_end = .;
diff --git a/arch/sparc/mm/fault_64.c b/arch/sparc/mm/fault_64.c
index 2371fb6b97e4..8b7ddbd14b65 100644
--- a/arch/sparc/mm/fault_64.c
+++ b/arch/sparc/mm/fault_64.c
@@ -80,6 +80,7 @@ static void __kprobes bad_kernel_pc(struct pt_regs *regs, unsigned long vaddr)
 static unsigned int get_user_insn(unsigned long tpc)
 {
 	pgd_t *pgdp = pgd_offset(current->mm, tpc);
+	p4d_t *p4dp;
 	pud_t *pudp;
 	pmd_t *pmdp;
 	pte_t *ptep, pte;
@@ -88,7 +89,10 @@ static unsigned int get_user_insn(unsigned long tpc)
 
 	if (pgd_none(*pgdp) || unlikely(pgd_bad(*pgdp)))
 		goto out;
-	pudp = pud_offset(pgdp, tpc);
+	p4dp = p4d_offset(pgdp, tpc);
+	if (p4d_none(*p4dp) || unlikely(p4d_bad(*p4dp)))
+		goto out;
+	pudp = pud_offset(p4dp, tpc);
 	if (pud_none(*pudp) || unlikely(pud_bad(*pudp)))
 		goto out;
 
diff --git a/arch/sparc/mm/hugetlbpage.c b/arch/sparc/mm/hugetlbpage.c
index f78793a06bbd..7b9fa861b67c 100644
--- a/arch/sparc/mm/hugetlbpage.c
+++ b/arch/sparc/mm/hugetlbpage.c
@@ -277,11 +277,13 @@ pte_t *huge_pte_alloc(struct mm_struct *mm,
 			unsigned long addr, unsigned long sz)
 {
 	pgd_t *pgd;
+	p4d_t *p4d;
 	pud_t *pud;
 	pmd_t *pmd;
 
 	pgd = pgd_offset(mm, addr);
-	pud = pud_alloc(mm, pgd, addr);
+	p4d = p4d_offset(pgd, addr);
+	pud = pud_alloc(mm, p4d, addr);
 	if (!pud)
 		return NULL;
 	if (sz >= PUD_SIZE)
@@ -298,13 +300,17 @@ pte_t *huge_pte_offset(struct mm_struct *mm,
 		       unsigned long addr, unsigned long sz)
 {
 	pgd_t *pgd;
+	p4d_t *p4d;
 	pud_t *pud;
 	pmd_t *pmd;
 
 	pgd = pgd_offset(mm, addr);
 	if (pgd_none(*pgd))
 		return NULL;
-	pud = pud_offset(pgd, addr);
+	p4d = p4d_offset(pgd, addr);
+	if (p4d_none(*p4d))
+		return NULL;
+	pud = pud_offset(p4d, addr);
 	if (pud_none(*pud))
 		return NULL;
 	if (is_hugetlb_pud(*pud))
@@ -449,7 +455,7 @@ static void hugetlb_free_pmd_range(struct mmu_gather *tlb, pud_t *pud,
 	mm_dec_nr_pmds(tlb->mm);
 }
 
-static void hugetlb_free_pud_range(struct mmu_gather *tlb, pgd_t *pgd,
+static void hugetlb_free_pud_range(struct mmu_gather *tlb, p4d_t *p4d,
 				   unsigned long addr, unsigned long end,
 				   unsigned long floor, unsigned long ceiling)
 {
@@ -458,7 +464,7 @@ static void hugetlb_free_pud_range(struct mmu_gather *tlb, pgd_t *pgd,
 	unsigned long start;
 
 	start = addr;
-	pud = pud_offset(pgd, addr);
+	pud = pud_offset(p4d, addr);
 	do {
 		next = pud_addr_end(addr, end);
 		if (pud_none_or_clear_bad(pud))
@@ -481,8 +487,8 @@ static void hugetlb_free_pud_range(struct mmu_gather *tlb, pgd_t *pgd,
 	if (end - 1 > ceiling - 1)
 		return;
 
-	pud = pud_offset(pgd, start);
-	pgd_clear(pgd);
+	pud = pud_offset(p4d, start);
+	p4d_clear(p4d);
 	pud_free_tlb(tlb, pud, start);
 	mm_dec_nr_puds(tlb->mm);
 }
@@ -492,6 +498,7 @@ void hugetlb_free_pgd_range(struct mmu_gather *tlb,
 			    unsigned long floor, unsigned long ceiling)
 {
 	pgd_t *pgd;
+	p4d_t *p4d;
 	unsigned long next;
 
 	addr &= PMD_MASK;
@@ -511,10 +518,11 @@ void hugetlb_free_pgd_range(struct mmu_gather *tlb,
 		return;
 
 	pgd = pgd_offset(tlb->mm, addr);
+	p4d = p4d_offset(pgd, addr);
 	do {
-		next = pgd_addr_end(addr, end);
-		if (pgd_none_or_clear_bad(pgd))
+		next = p4d_addr_end(addr, end);
+		if (p4d_none_or_clear_bad(p4d))
 			continue;
-		hugetlb_free_pud_range(tlb, pgd, addr, next, floor, ceiling);
-	} while (pgd++, addr = next, addr != end);
+		hugetlb_free_pud_range(tlb, p4d, addr, next, floor, ceiling);
+	} while (p4d++, addr = next, addr != end);
 }
diff --git a/arch/sparc/mm/init_64.c b/arch/sparc/mm/init_64.c
index e6d91819da92..1cf0d666dea3 100644
--- a/arch/sparc/mm/init_64.c
+++ b/arch/sparc/mm/init_64.c
@@ -530,7 +530,8 @@ void __kprobes flush_icache_range(unsigned long start, unsigned long end)
 				paddr = kaddr & mask;
 			else {
 				pgd_t *pgdp = pgd_offset_k(kaddr);
-				pud_t *pudp = pud_offset(pgdp, kaddr);
+				p4d_t *p4dp = p4d_offset(pgdp, kaddr);
+				pud_t *pudp = pud_offset(p4dp, kaddr);
 				pmd_t *pmdp = pmd_offset(pudp, kaddr);
 				pte_t *ptep = pte_offset_kernel(pmdp, kaddr);
 
@@ -1653,6 +1654,7 @@ static unsigned long max_phys_bits = 40;
 bool kern_addr_valid(unsigned long addr)
 {
 	pgd_t *pgd;
+	p4d_t *p4d;
 	pud_t *pud;
 	pmd_t *pmd;
 	pte_t *pte;
@@ -1674,7 +1676,11 @@ bool kern_addr_valid(unsigned long addr)
 	if (pgd_none(*pgd))
 		return 0;
 
-	pud = pud_offset(pgd, addr);
+	p4d = p4d_offset(pgd, addr);
+	if (p4d_none(*p4d))
+		return 0;
+
+	pud = pud_offset(p4d, addr);
 	if (pud_none(*pud))
 		return 0;
 
@@ -1800,6 +1806,7 @@ static unsigned long __ref kernel_map_range(unsigned long pstart,
 	while (vstart < vend) {
 		unsigned long this_end, paddr = __pa(vstart);
 		pgd_t *pgd = pgd_offset_k(vstart);
+		p4d_t *p4d;
 		pud_t *pud;
 		pmd_t *pmd;
 		pte_t *pte;
@@ -1814,7 +1821,20 @@ static unsigned long __ref kernel_map_range(unsigned long pstart,
 			alloc_bytes += PAGE_SIZE;
 			pgd_populate(&init_mm, pgd, new);
 		}
-		pud = pud_offset(pgd, vstart);
+
+		p4d = p4d_offset(pgd, vstart);
+		if (p4d_none(*p4d)) {
+			pud_t *new;
+
+			new = memblock_alloc_from(PAGE_SIZE, PAGE_SIZE,
+						  PAGE_SIZE);
+			if (!new)
+				goto err_alloc;
+			alloc_bytes += PAGE_SIZE;
+			p4d_populate(&init_mm, p4d, new);
+		}
+
+		pud = pud_offset(p4d, vstart);
 		if (pud_none(*pud)) {
 			pmd_t *new;
 
@@ -2612,13 +2632,18 @@ int __meminit vmemmap_populate(unsigned long vstart, unsigned long vend,
 	for (; vstart < vend; vstart += PMD_SIZE) {
 		pgd_t *pgd = vmemmap_pgd_populate(vstart, node);
 		unsigned long pte;
+		p4d_t *p4d;
 		pud_t *pud;
 		pmd_t *pmd;
 
 		if (!pgd)
 			return -ENOMEM;
 
-		pud = vmemmap_pud_populate(pgd, vstart, node);
+		p4d = vmemmap_p4d_populate(pgd, vstart, node);
+		if (!p4d)
+			return -ENOMEM;
+
+		pud = vmemmap_pud_populate(p4d, vstart, node);
 		if (!pud)
 			return -ENOMEM;
 
diff --git a/arch/um/drivers/cow.h b/arch/um/drivers/cow.h
index 760c507dd5b6..103adac691ed 100644
--- a/arch/um/drivers/cow.h
+++ b/arch/um/drivers/cow.h
@@ -11,7 +11,7 @@ extern int init_cow_file(int fd, char *cow_file, char *backing_file,
 extern int file_reader(__u64 offset, char *buf, int len, void *arg);
 extern int read_cow_header(int (*reader)(__u64, char *, int, void *),
 			   void *arg, __u32 *version_out,
-			   char **backing_file_out, time_t *mtime_out,
+			   char **backing_file_out, long long *mtime_out,
 			   unsigned long long *size_out, int *sectorsize_out,
 			   __u32 *align_out, int *bitmap_offset_out);
 
diff --git a/arch/um/drivers/cow_user.c b/arch/um/drivers/cow_user.c
index 74b0c2686c95..29b46581ddd1 100644
--- a/arch/um/drivers/cow_user.c
+++ b/arch/um/drivers/cow_user.c
@@ -17,6 +17,7 @@
 
 #define PATH_LEN_V1 256
 
+/* unsigned time_t works until year 2106 */
 typedef __u32 time32_t;
 
 struct cow_header_v1 {
@@ -197,7 +198,7 @@ int write_cow_header(char *cow_file, int fd, char *backing_file,
 		     int sectorsize, int alignment, unsigned long long *size)
 {
 	struct cow_header_v3 *header;
-	unsigned long modtime;
+	long long modtime;
 	int err;
 
 	err = cow_seek_file(fd, 0);
@@ -276,7 +277,7 @@ int file_reader(__u64 offset, char *buf, int len, void *arg)
 
 int read_cow_header(int (*reader)(__u64, char *, int, void *), void *arg,
 		    __u32 *version_out, char **backing_file_out,
-		    time_t *mtime_out, unsigned long long *size_out,
+		    long long *mtime_out, unsigned long long *size_out,
 		    int *sectorsize_out, __u32 *align_out,
 		    int *bitmap_offset_out)
 {
@@ -363,7 +364,7 @@ int read_cow_header(int (*reader)(__u64, char *, int, void *), void *arg,
 
 		/*
 		 * this was used until Dec2005 - 64bits are needed to represent
-		 * 2038+. I.e. we can safely do this truncating cast.
+		 * 2106+. I.e. we can safely do this truncating cast.
 		 *
 		 * Additionally, we must use be32toh() instead of be64toh(), since
 		 * the program used to use the former (tested - I got mtime
diff --git a/arch/um/drivers/mconsole_kern.c b/arch/um/drivers/mconsole_kern.c
index 0117489e9b30..b80a1d616e4e 100644
--- a/arch/um/drivers/mconsole_kern.c
+++ b/arch/um/drivers/mconsole_kern.c
@@ -752,10 +752,9 @@ static ssize_t mconsole_proc_write(struct file *file,
 	return count;
 }
 
-static const struct file_operations mconsole_proc_fops = {
-	.owner		= THIS_MODULE,
-	.write		= mconsole_proc_write,
-	.llseek		= noop_llseek,
+static const struct proc_ops mconsole_proc_ops = {
+	.proc_write	= mconsole_proc_write,
+	.proc_lseek	= noop_llseek,
 };
 
 static int create_proc_mconsole(void)
@@ -765,7 +764,7 @@ static int create_proc_mconsole(void)
 	if (notify_socket == NULL)
 		return 0;
 
-	ent = proc_create("mconsole", 0200, NULL, &mconsole_proc_fops);
+	ent = proc_create("mconsole", 0200, NULL, &mconsole_proc_ops);
 	if (ent == NULL) {
 		printk(KERN_INFO "create_proc_mconsole : proc_create failed\n");
 		return 0;
diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c
index 6627d7c30f37..247f95da057b 100644
--- a/arch/um/drivers/ubd_kern.c
+++ b/arch/um/drivers/ubd_kern.c
@@ -113,6 +113,7 @@ static const struct block_device_operations ubd_blops = {
         .open		= ubd_open,
         .release	= ubd_release,
         .ioctl		= ubd_ioctl,
+        .compat_ioctl	= blkdev_compat_ptr_ioctl,
 	.getgeo		= ubd_getgeo,
 };
 
@@ -561,7 +562,7 @@ static inline int ubd_file_size(struct ubd *ubd_dev, __u64 *size_out)
 	__u32 version;
 	__u32 align;
 	char *backing_file;
-	time_t mtime;
+	time64_t mtime;
 	unsigned long long size;
 	int sector_size;
 	int bitmap_offset;
@@ -600,9 +601,9 @@ static int read_cow_bitmap(int fd, void *buf, int offset, int len)
 	return 0;
 }
 
-static int backing_file_mismatch(char *file, __u64 size, time_t mtime)
+static int backing_file_mismatch(char *file, __u64 size, time64_t mtime)
 {
-	unsigned long modtime;
+	time64_t modtime;
 	unsigned long long actual;
 	int err;
 
@@ -628,7 +629,7 @@ static int backing_file_mismatch(char *file, __u64 size, time_t mtime)
 		return -EINVAL;
 	}
 	if (modtime != mtime) {
-		printk(KERN_ERR "mtime mismatch (%ld vs %ld) of COW header vs "
+		printk(KERN_ERR "mtime mismatch (%lld vs %lld) of COW header vs "
 		       "backing file\n", mtime, modtime);
 		return -EINVAL;
 	}
@@ -671,7 +672,7 @@ static int open_ubd_file(char *file, struct openflags *openflags, int shared,
 		  unsigned long *bitmap_len_out, int *data_offset_out,
 		  int *create_cow_out)
 {
-	time_t mtime;
+	time64_t mtime;
 	unsigned long long size;
 	__u32 version, align;
 	char *backing_file;
diff --git a/arch/um/include/asm/mmu_context.h b/arch/um/include/asm/mmu_context.h
index 5aee0626e390..b4deb1bfbb68 100644
--- a/arch/um/include/asm/mmu_context.h
+++ b/arch/um/include/asm/mmu_context.h
@@ -25,11 +25,6 @@ static inline void arch_unmap(struct mm_struct *mm,
 			unsigned long start, unsigned long end)
 {
 }
-static inline void arch_bprm_mm_init(struct mm_struct *mm,
-				     struct vm_area_struct *vma)
-{
-}
-
 static inline bool arch_vma_access_permitted(struct vm_area_struct *vma,
 		bool write, bool execute, bool foreign)
 {
diff --git a/arch/um/include/shared/os.h b/arch/um/include/shared/os.h
index 506bcd1bca68..0f30204b6afa 100644
--- a/arch/um/include/shared/os.h
+++ b/arch/um/include/shared/os.h
@@ -150,7 +150,7 @@ extern int os_sync_file(int fd);
 extern int os_file_size(const char *file, unsigned long long *size_out);
 extern int os_pread_file(int fd, void *buf, int len, unsigned long long offset);
 extern int os_pwrite_file(int fd, const void *buf, int count, unsigned long long offset);
-extern int os_file_modtime(const char *file, unsigned long *modtime);
+extern int os_file_modtime(const char *file, long long *modtime);
 extern int os_pipe(int *fd, int stream, int close_on_exec);
 extern int os_set_fd_async(int fd);
 extern int os_clear_fd_async(int fd);
diff --git a/arch/um/kernel/exitcode.c b/arch/um/kernel/exitcode.c
index 369fd844e195..43edc2aa57e4 100644
--- a/arch/um/kernel/exitcode.c
+++ b/arch/um/kernel/exitcode.c
@@ -55,20 +55,19 @@ static ssize_t exitcode_proc_write(struct file *file,
 	return count;
 }
 
-static const struct file_operations exitcode_proc_fops = {
-	.owner		= THIS_MODULE,
-	.open		= exitcode_proc_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-	.write		= exitcode_proc_write,
+static const struct proc_ops exitcode_proc_ops = {
+	.proc_open	= exitcode_proc_open,
+	.proc_read	= seq_read,
+	.proc_lseek	= seq_lseek,
+	.proc_release	= single_release,
+	.proc_write	= exitcode_proc_write,
 };
 
 static int make_proc_exitcode(void)
 {
 	struct proc_dir_entry *ent;
 
-	ent = proc_create("exitcode", 0600, NULL, &exitcode_proc_fops);
+	ent = proc_create("exitcode", 0600, NULL, &exitcode_proc_ops);
 	if (ent == NULL) {
 		printk(KERN_WARNING "make_proc_exitcode : Failed to register "
 		       "/proc/exitcode\n");
diff --git a/arch/um/kernel/process.c b/arch/um/kernel/process.c
index 17045e7211bf..56a094182bf5 100644
--- a/arch/um/kernel/process.c
+++ b/arch/um/kernel/process.c
@@ -348,13 +348,12 @@ static ssize_t sysemu_proc_write(struct file *file, const char __user *buf,
 	return count;
 }
 
-static const struct file_operations sysemu_proc_fops = {
-	.owner		= THIS_MODULE,
-	.open		= sysemu_proc_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-	.write		= sysemu_proc_write,
+static const struct proc_ops sysemu_proc_ops = {
+	.proc_open	= sysemu_proc_open,
+	.proc_read	= seq_read,
+	.proc_lseek	= seq_lseek,
+	.proc_release	= single_release,
+	.proc_write	= sysemu_proc_write,
 };
 
 int __init make_proc_sysemu(void)
@@ -363,7 +362,7 @@ int __init make_proc_sysemu(void)
 	if (!sysemu_supported)
 		return 0;
 
-	ent = proc_create("sysemu", 0600, NULL, &sysemu_proc_fops);
+	ent = proc_create("sysemu", 0600, NULL, &sysemu_proc_ops);
 
 	if (ent == NULL)
 	{
diff --git a/arch/um/os-Linux/file.c b/arch/um/os-Linux/file.c
index 5133e3afb96f..fbda10535dab 100644
--- a/arch/um/os-Linux/file.c
+++ b/arch/um/os-Linux/file.c
@@ -341,7 +341,7 @@ int os_file_size(const char *file, unsigned long long *size_out)
 	return 0;
 }
 
-int os_file_modtime(const char *file, unsigned long *modtime)
+int os_file_modtime(const char *file, long long *modtime)
 {
 	struct uml_stat buf;
 	int err;
diff --git a/arch/unicore32/include/asm/mmu_context.h b/arch/unicore32/include/asm/mmu_context.h
index 247a07ae2cdc..388c0c811c68 100644
--- a/arch/unicore32/include/asm/mmu_context.h
+++ b/arch/unicore32/include/asm/mmu_context.h
@@ -89,11 +89,6 @@ static inline void arch_unmap(struct mm_struct *mm,
 {
 }
 
-static inline void arch_bprm_mm_init(struct mm_struct *mm,
-				     struct vm_area_struct *vma)
-{
-}
-
 static inline bool arch_vma_access_permitted(struct vm_area_struct *vma,
 		bool write, bool execute, bool foreign)
 {
diff --git a/arch/unicore32/kernel/setup.c b/arch/unicore32/kernel/setup.c
index 95ae3b54df68..0c4242a5ee1d 100644
--- a/arch/unicore32/kernel/setup.c
+++ b/arch/unicore32/kernel/setup.c
@@ -270,8 +270,6 @@ void __init setup_arch(char **cmdline_p)
 #ifdef CONFIG_VT
 #if defined(CONFIG_VGA_CONSOLE)
 	conswitchp = &vga_con;
-#elif defined(CONFIG_DUMMY_CONSOLE)
-	conswitchp = &dummy_con;
 #endif
 #endif
 	early_trap_init();
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index a283336bb5d5..beea77046f9b 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -120,6 +120,7 @@ config X86
 	select GENERIC_IRQ_RESERVATION_MODE
 	select GENERIC_IRQ_SHOW
 	select GENERIC_PENDING_IRQ		if SMP
+	select GENERIC_PTDUMP
 	select GENERIC_SMP_IDLE_THREAD
 	select GENERIC_STRNCPY_FROM_USER
 	select GENERIC_STRNLEN_USER
@@ -202,7 +203,7 @@ config X86
 	select HAVE_PCI
 	select HAVE_PERF_REGS
 	select HAVE_PERF_USER_STACK_DUMP
-	select HAVE_RCU_TABLE_FREE		if PARAVIRT
+	select MMU_GATHER_RCU_TABLE_FREE		if PARAVIRT
 	select HAVE_REGS_AND_STACK_ACCESS_API
 	select HAVE_RELIABLE_STACKTRACE		if X86_64 && (UNWINDER_FRAME_POINTER || UNWINDER_ORC) && STACK_VALIDATION
 	select HAVE_FUNCTION_ARG_ACCESS_API
@@ -1888,34 +1889,6 @@ config X86_UMIP
 	  specific cases in protected and virtual-8086 modes. Emulated
 	  results are dummy.
 
-config X86_INTEL_MPX
-	prompt "Intel MPX (Memory Protection Extensions)"
-	def_bool n
-	# Note: only available in 64-bit mode due to VMA flags shortage
-	depends on CPU_SUP_INTEL && X86_64
-	select ARCH_USES_HIGH_VMA_FLAGS
-	---help---
-	  MPX provides hardware features that can be used in
-	  conjunction with compiler-instrumented code to check
-	  memory references.  It is designed to detect buffer
-	  overflow or underflow bugs.
-
-	  This option enables running applications which are
-	  instrumented or otherwise use MPX.  It does not use MPX
-	  itself inside the kernel or to protect the kernel
-	  against bad memory references.
-
-	  Enabling this option will make the kernel larger:
-	  ~8k of kernel text and 36 bytes of data on a 64-bit
-	  defconfig.  It adds a long to the 'mm_struct' which
-	  will increase the kernel memory overhead of each
-	  process and adds some branches to paths used during
-	  exec() and munmap().
-
-	  For details, see Documentation/x86/intel_mpx.rst
-
-	  If unsure, say N.
-
 config X86_INTEL_MEMORY_PROTECTION_KEYS
 	prompt "Intel Memory Protection Keys"
 	def_bool y
@@ -2959,9 +2932,6 @@ config HAVE_ATOMIC_IOMAP
 	def_bool y
 	depends on X86_32
 
-config X86_DEV_DMA_OPS
-	bool
-
 source "drivers/firmware/Kconfig"
 
 source "arch/x86/kvm/Kconfig"
diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug
index c4eab8ed33a3..2e74690b028a 100644
--- a/arch/x86/Kconfig.debug
+++ b/arch/x86/Kconfig.debug
@@ -62,26 +62,10 @@ config EARLY_PRINTK_USB_XDBC
 config MCSAFE_TEST
 	def_bool n
 
-config X86_PTDUMP_CORE
-	def_bool n
-
-config X86_PTDUMP
-	tristate "Export kernel pagetable layout to userspace via debugfs"
-	depends on DEBUG_KERNEL
-	select DEBUG_FS
-	select X86_PTDUMP_CORE
-	---help---
-	  Say Y here if you want to show the kernel pagetable layout in a
-	  debugfs file. This information is only useful for kernel developers
-	  who are working in architecture specific areas of the kernel.
-	  It is probably not a good idea to enable this feature in a production
-	  kernel.
-	  If in doubt, say "N"
-
 config EFI_PGT_DUMP
 	bool "Dump the EFI pagetable"
 	depends on EFI
-	select X86_PTDUMP_CORE
+	select PTDUMP_CORE
 	---help---
 	  Enable this if you want to dump the EFI page table before
 	  enabling virtual mode. This can be used to debug miscellaneous
@@ -90,7 +74,7 @@ config EFI_PGT_DUMP
 
 config DEBUG_WX
 	bool "Warn on W+X mappings at boot"
-	select X86_PTDUMP_CORE
+	select PTDUMP_CORE
 	---help---
 	  Generate a warning if any W+X mappings are found at boot.
 
diff --git a/arch/x86/entry/syscalls/syscall_32.tbl b/arch/x86/entry/syscalls/syscall_32.tbl
index 15908eb9b17e..c17cb77eb150 100644
--- a/arch/x86/entry/syscalls/syscall_32.tbl
+++ b/arch/x86/entry/syscalls/syscall_32.tbl
@@ -440,3 +440,5 @@
 433	i386	fspick			sys_fspick			__ia32_sys_fspick
 434	i386	pidfd_open		sys_pidfd_open			__ia32_sys_pidfd_open
 435	i386	clone3			sys_clone3			__ia32_sys_clone3
+437	i386	openat2			sys_openat2			__ia32_sys_openat2
+438	i386	pidfd_getfd		sys_pidfd_getfd			__ia32_sys_pidfd_getfd
diff --git a/arch/x86/entry/syscalls/syscall_64.tbl b/arch/x86/entry/syscalls/syscall_64.tbl
index c29976eca4a8..44d510bc9b78 100644
--- a/arch/x86/entry/syscalls/syscall_64.tbl
+++ b/arch/x86/entry/syscalls/syscall_64.tbl
@@ -357,6 +357,8 @@
 433	common	fspick			__x64_sys_fspick
 434	common	pidfd_open		__x64_sys_pidfd_open
 435	common	clone3			__x64_sys_clone3/ptregs
+437	common	openat2			__x64_sys_openat2
+438	common	pidfd_getfd		__x64_sys_pidfd_getfd
 
 #
 # x32-specific system call numbers start at 512 to avoid cache impact
diff --git a/arch/x86/include/asm/Kbuild b/arch/x86/include/asm/Kbuild
index 8b52bc5ddf69..ea34464d6221 100644
--- a/arch/x86/include/asm/Kbuild
+++ b/arch/x86/include/asm/Kbuild
@@ -7,7 +7,6 @@ generated-y += unistd_32_ia32.h
 generated-y += unistd_64_x32.h
 generated-y += xen-hypercalls.h
 
-generic-y += dma-contiguous.h
 generic-y += early_ioremap.h
 generic-y += export.h
 generic-y += mcs_spinlock.h
diff --git a/arch/x86/include/asm/archrandom.h b/arch/x86/include/asm/archrandom.h
index af45e1452f09..7a4bb1bd4bdb 100644
--- a/arch/x86/include/asm/archrandom.h
+++ b/arch/x86/include/asm/archrandom.h
@@ -27,7 +27,7 @@
 
 /* Unconditional execution of RDRAND and RDSEED */
 
-static inline bool rdrand_long(unsigned long *v)
+static inline bool __must_check rdrand_long(unsigned long *v)
 {
 	bool ok;
 	unsigned int retry = RDRAND_RETRY_LOOPS;
@@ -41,7 +41,7 @@ static inline bool rdrand_long(unsigned long *v)
 	return false;
 }
 
-static inline bool rdrand_int(unsigned int *v)
+static inline bool __must_check rdrand_int(unsigned int *v)
 {
 	bool ok;
 	unsigned int retry = RDRAND_RETRY_LOOPS;
@@ -55,7 +55,7 @@ static inline bool rdrand_int(unsigned int *v)
 	return false;
 }
 
-static inline bool rdseed_long(unsigned long *v)
+static inline bool __must_check rdseed_long(unsigned long *v)
 {
 	bool ok;
 	asm volatile(RDSEED_LONG
@@ -64,7 +64,7 @@ static inline bool rdseed_long(unsigned long *v)
 	return ok;
 }
 
-static inline bool rdseed_int(unsigned int *v)
+static inline bool __must_check rdseed_int(unsigned int *v)
 {
 	bool ok;
 	asm volatile(RDSEED_INT
@@ -73,10 +73,6 @@ static inline bool rdseed_int(unsigned int *v)
 	return ok;
 }
 
-/* Conditional execution based on CPU type */
-#define arch_has_random()	static_cpu_has(X86_FEATURE_RDRAND)
-#define arch_has_random_seed()	static_cpu_has(X86_FEATURE_RDSEED)
-
 /*
  * These are the generic interfaces; they must not be declared if the
  * stubs in <linux/random.h> are to be invoked,
@@ -84,24 +80,24 @@ static inline bool rdseed_int(unsigned int *v)
  */
 #ifdef CONFIG_ARCH_RANDOM
 
-static inline bool arch_get_random_long(unsigned long *v)
+static inline bool __must_check arch_get_random_long(unsigned long *v)
 {
-	return arch_has_random() ? rdrand_long(v) : false;
+	return static_cpu_has(X86_FEATURE_RDRAND) ? rdrand_long(v) : false;
 }
 
-static inline bool arch_get_random_int(unsigned int *v)
+static inline bool __must_check arch_get_random_int(unsigned int *v)
 {
-	return arch_has_random() ? rdrand_int(v) : false;
+	return static_cpu_has(X86_FEATURE_RDRAND) ? rdrand_int(v) : false;
 }
 
-static inline bool arch_get_random_seed_long(unsigned long *v)
+static inline bool __must_check arch_get_random_seed_long(unsigned long *v)
 {
-	return arch_has_random_seed() ? rdseed_long(v) : false;
+	return static_cpu_has(X86_FEATURE_RDSEED) ? rdseed_long(v) : false;
 }
 
-static inline bool arch_get_random_seed_int(unsigned int *v)
+static inline bool __must_check arch_get_random_seed_int(unsigned int *v)
 {
-	return arch_has_random_seed() ? rdseed_int(v) : false;
+	return static_cpu_has(X86_FEATURE_RDSEED) ? rdseed_int(v) : false;
 }
 
 extern void x86_init_rdrand(struct cpuinfo_x86 *c);
diff --git a/arch/x86/include/asm/bugs.h b/arch/x86/include/asm/bugs.h
index 794eb2129bc6..92ae28389940 100644
--- a/arch/x86/include/asm/bugs.h
+++ b/arch/x86/include/asm/bugs.h
@@ -6,12 +6,6 @@
 
 extern void check_bugs(void);
 
-#if defined(CONFIG_CPU_SUP_INTEL)
-void check_mpx_erratum(struct cpuinfo_x86 *c);
-#else
-static inline void check_mpx_erratum(struct cpuinfo_x86 *c) {}
-#endif
-
 #if defined(CONFIG_CPU_SUP_INTEL) && defined(CONFIG_X86_32)
 int ppro_with_ram_bug(void);
 #else
diff --git a/arch/x86/include/asm/compat.h b/arch/x86/include/asm/compat.h
index 22c4dfe65992..52e9f3480f69 100644
--- a/arch/x86/include/asm/compat.h
+++ b/arch/x86/include/asm/compat.h
@@ -177,23 +177,6 @@ typedef struct user_regs_struct compat_elf_gregset_t;
 	(!!(task_pt_regs(current)->orig_ax & __X32_SYSCALL_BIT))
 #endif
 
-/*
- * A pointer passed in from user mode. This should not
- * be used for syscall parameters, just declare them
- * as pointers because the syscall entry code will have
- * appropriately converted them already.
- */
-
-static inline void __user *compat_ptr(compat_uptr_t uptr)
-{
-	return (void __user *)(unsigned long)uptr;
-}
-
-static inline compat_uptr_t ptr_to_compat(void __user *uptr)
-{
-	return (u32)(unsigned long)uptr;
-}
-
 static inline void __user *arch_compat_alloc_user_space(long len)
 {
 	compat_uptr_t sp;
diff --git a/arch/x86/include/asm/device.h b/arch/x86/include/asm/device.h
index 5e12c63b47aa..7e31f7f1bb06 100644
--- a/arch/x86/include/asm/device.h
+++ b/arch/x86/include/asm/device.h
@@ -8,16 +8,6 @@ struct dev_archdata {
 #endif
 };
 
-#if defined(CONFIG_X86_DEV_DMA_OPS) && defined(CONFIG_PCI_DOMAINS)
-struct dma_domain {
-	struct list_head node;
-	const struct dma_map_ops *dma_ops;
-	int domain_nr;
-};
-void add_dma_domain(struct dma_domain *domain);
-void del_dma_domain(struct dma_domain *domain);
-#endif
-
 struct pdev_archdata {
 };
 
diff --git a/arch/x86/include/asm/disabled-features.h b/arch/x86/include/asm/disabled-features.h
index 8e1d0bb46361..4ea8584682f9 100644
--- a/arch/x86/include/asm/disabled-features.h
+++ b/arch/x86/include/asm/disabled-features.h
@@ -10,12 +10,6 @@
  * cpu_feature_enabled().
  */
 
-#ifdef CONFIG_X86_INTEL_MPX
-# define DISABLE_MPX	0
-#else
-# define DISABLE_MPX	(1<<(X86_FEATURE_MPX & 31))
-#endif
-
 #ifdef CONFIG_X86_SMAP
 # define DISABLE_SMAP	0
 #else
@@ -74,7 +68,7 @@
 #define DISABLED_MASK6	0
 #define DISABLED_MASK7	(DISABLE_PTI)
 #define DISABLED_MASK8	0
-#define DISABLED_MASK9	(DISABLE_MPX|DISABLE_SMAP)
+#define DISABLED_MASK9	(DISABLE_SMAP)
 #define DISABLED_MASK10	0
 #define DISABLED_MASK11	0
 #define DISABLED_MASK12	0
diff --git a/arch/x86/include/asm/hyperv-tlfs.h b/arch/x86/include/asm/hyperv-tlfs.h
index 5f10f7f2098d..92abc1e42bfc 100644
--- a/arch/x86/include/asm/hyperv-tlfs.h
+++ b/arch/x86/include/asm/hyperv-tlfs.h
@@ -809,7 +809,8 @@ union hv_synic_sint {
 		u64 reserved1:8;
 		u64 masked:1;
 		u64 auto_eoi:1;
-		u64 reserved2:46;
+		u64 polling:1;
+		u64 reserved2:45;
 	} __packed;
 };
 
diff --git a/arch/x86/include/asm/kvm_emulate.h b/arch/x86/include/asm/kvm_emulate.h
index 77cf6c11f66b..03946eb3e2b9 100644
--- a/arch/x86/include/asm/kvm_emulate.h
+++ b/arch/x86/include/asm/kvm_emulate.h
@@ -222,6 +222,10 @@ struct x86_emulate_ops {
 
 	bool (*get_cpuid)(struct x86_emulate_ctxt *ctxt, u32 *eax, u32 *ebx,
 			  u32 *ecx, u32 *edx, bool check_limit);
+	bool (*guest_has_long_mode)(struct x86_emulate_ctxt *ctxt);
+	bool (*guest_has_movbe)(struct x86_emulate_ctxt *ctxt);
+	bool (*guest_has_fxsr)(struct x86_emulate_ctxt *ctxt);
+
 	void (*set_nmi_mask)(struct x86_emulate_ctxt *ctxt, bool masked);
 
 	unsigned (*get_hflags)(struct x86_emulate_ctxt *ctxt);
diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index b79cd6aa4075..4dffbc10d3f8 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -78,6 +78,8 @@
 #define KVM_REQ_HV_STIMER		KVM_ARCH_REQ(22)
 #define KVM_REQ_LOAD_EOI_EXITMAP	KVM_ARCH_REQ(23)
 #define KVM_REQ_GET_VMCS12_PAGES	KVM_ARCH_REQ(24)
+#define KVM_REQ_APICV_UPDATE \
+	KVM_ARCH_REQ_FLAGS(25, KVM_REQUEST_WAIT | KVM_REQUEST_NO_WAKEUP)
 
 #define CR0_RESERVED_BITS                                               \
 	(~(unsigned long)(X86_CR0_PE | X86_CR0_MP | X86_CR0_EM | X86_CR0_TS \
@@ -175,6 +177,11 @@ enum {
 	VCPU_SREG_LDTR,
 };
 
+enum exit_fastpath_completion {
+	EXIT_FASTPATH_NONE,
+	EXIT_FASTPATH_SKIP_EMUL_INS,
+};
+
 #include <asm/kvm_emulate.h>
 
 #define KVM_NR_MEM_OBJS 40
@@ -378,12 +385,12 @@ struct kvm_mmu {
 	void (*set_cr3)(struct kvm_vcpu *vcpu, unsigned long root);
 	unsigned long (*get_cr3)(struct kvm_vcpu *vcpu);
 	u64 (*get_pdptr)(struct kvm_vcpu *vcpu, int index);
-	int (*page_fault)(struct kvm_vcpu *vcpu, gva_t gva, u32 err,
+	int (*page_fault)(struct kvm_vcpu *vcpu, gpa_t cr2_or_gpa, u32 err,
 			  bool prefault);
 	void (*inject_page_fault)(struct kvm_vcpu *vcpu,
 				  struct x86_exception *fault);
-	gpa_t (*gva_to_gpa)(struct kvm_vcpu *vcpu, gva_t gva, u32 access,
-			    struct x86_exception *exception);
+	gpa_t (*gva_to_gpa)(struct kvm_vcpu *vcpu, gpa_t gva_or_gpa,
+			    u32 access, struct x86_exception *exception);
 	gpa_t (*translate_gpa)(struct kvm_vcpu *vcpu, gpa_t gpa, u32 access,
 			       struct x86_exception *exception);
 	int (*sync_page)(struct kvm_vcpu *vcpu,
@@ -606,7 +613,7 @@ struct kvm_vcpu_arch {
 	 * Paging state of an L2 guest (used for nested npt)
 	 *
 	 * This context will save all necessary information to walk page tables
-	 * of the an L2 guest. This context is only initialized for page table
+	 * of an L2 guest. This context is only initialized for page table
 	 * walking and not for faulting since we never handle l2 page faults on
 	 * the host.
 	 */
@@ -685,10 +692,10 @@ struct kvm_vcpu_arch {
 	bool pvclock_set_guest_stopped_request;
 
 	struct {
+		u8 preempted;
 		u64 msr_val;
 		u64 last_steal;
-		struct gfn_to_hva_cache stime;
-		struct kvm_steal_time steal;
+		struct gfn_to_pfn_cache cache;
 	} st;
 
 	u64 tsc_offset;
@@ -868,6 +875,12 @@ enum kvm_irqchip_mode {
 	KVM_IRQCHIP_SPLIT,        /* created with KVM_CAP_SPLIT_IRQCHIP */
 };
 
+#define APICV_INHIBIT_REASON_DISABLE    0
+#define APICV_INHIBIT_REASON_HYPERV     1
+#define APICV_INHIBIT_REASON_NESTED     2
+#define APICV_INHIBIT_REASON_IRQWIN     3
+#define APICV_INHIBIT_REASON_PIT_REINJ  4
+
 struct kvm_arch {
 	unsigned long n_used_mmu_pages;
 	unsigned long n_requested_mmu_pages;
@@ -899,6 +912,7 @@ struct kvm_arch {
 	struct kvm_apic_map *apic_map;
 
 	bool apic_access_page_done;
+	unsigned long apicv_inhibit_reasons;
 
 	gpa_t wall_clock;
 
@@ -1022,6 +1036,11 @@ struct kvm_lapic_irq {
 	bool msi_redir_hint;
 };
 
+static inline u16 kvm_lapic_irq_dest_mode(bool dest_mode_logical)
+{
+	return dest_mode_logical ? APIC_DEST_LOGICAL : APIC_DEST_PHYSICAL;
+}
+
 struct kvm_x86_ops {
 	int (*cpu_has_kvm_support)(void);          /* __init */
 	int (*disabled_by_bios)(void);             /* __init */
@@ -1040,7 +1059,7 @@ struct kvm_x86_ops {
 	void (*vm_destroy)(struct kvm *kvm);
 
 	/* Create, but do not attach this VCPU */
-	struct kvm_vcpu *(*vcpu_create)(struct kvm *kvm, unsigned id);
+	int (*vcpu_create)(struct kvm_vcpu *vcpu);
 	void (*vcpu_free)(struct kvm_vcpu *vcpu);
 	void (*vcpu_reset)(struct kvm_vcpu *vcpu, bool init_event);
 
@@ -1090,7 +1109,8 @@ struct kvm_x86_ops {
 	void (*tlb_flush_gva)(struct kvm_vcpu *vcpu, gva_t addr);
 
 	void (*run)(struct kvm_vcpu *vcpu);
-	int (*handle_exit)(struct kvm_vcpu *vcpu);
+	int (*handle_exit)(struct kvm_vcpu *vcpu,
+		enum exit_fastpath_completion exit_fastpath);
 	int (*skip_emulated_instruction)(struct kvm_vcpu *vcpu);
 	void (*set_interrupt_shadow)(struct kvm_vcpu *vcpu, int mask);
 	u32 (*get_interrupt_shadow)(struct kvm_vcpu *vcpu);
@@ -1107,7 +1127,8 @@ struct kvm_x86_ops {
 	void (*enable_nmi_window)(struct kvm_vcpu *vcpu);
 	void (*enable_irq_window)(struct kvm_vcpu *vcpu);
 	void (*update_cr8_intercept)(struct kvm_vcpu *vcpu, int tpr, int irr);
-	bool (*get_enable_apicv)(struct kvm *kvm);
+	bool (*check_apicv_inhibit_reasons)(ulong bit);
+	void (*pre_update_apicv_exec_ctrl)(struct kvm *kvm, bool activate);
 	void (*refresh_apicv_exec_ctrl)(struct kvm_vcpu *vcpu);
 	void (*hwapic_irr_update)(struct kvm_vcpu *vcpu, int max_irr);
 	void (*hwapic_isr_update)(struct kvm_vcpu *vcpu, int isr);
@@ -1140,11 +1161,13 @@ struct kvm_x86_ops {
 	int (*check_intercept)(struct kvm_vcpu *vcpu,
 			       struct x86_instruction_info *info,
 			       enum x86_intercept_stage stage);
-	void (*handle_exit_irqoff)(struct kvm_vcpu *vcpu);
+	void (*handle_exit_irqoff)(struct kvm_vcpu *vcpu,
+		enum exit_fastpath_completion *exit_fastpath);
 	bool (*mpx_supported)(void);
 	bool (*xsaves_supported)(void);
 	bool (*umip_emulated)(void);
 	bool (*pt_supported)(void);
+	bool (*pku_supported)(void);
 
 	int (*check_nested_events)(struct kvm_vcpu *vcpu, bool external_intr);
 	void (*request_immediate_exit)(struct kvm_vcpu *vcpu);
@@ -1464,11 +1487,15 @@ gpa_t kvm_mmu_gva_to_gpa_write(struct kvm_vcpu *vcpu, gva_t gva,
 gpa_t kvm_mmu_gva_to_gpa_system(struct kvm_vcpu *vcpu, gva_t gva,
 				struct x86_exception *exception);
 
-void kvm_vcpu_deactivate_apicv(struct kvm_vcpu *vcpu);
+bool kvm_apicv_activated(struct kvm *kvm);
+void kvm_apicv_init(struct kvm *kvm, bool enable);
+void kvm_vcpu_update_apicv(struct kvm_vcpu *vcpu);
+void kvm_request_apicv_update(struct kvm *kvm, bool activate,
+			      unsigned long bit);
 
 int kvm_emulate_hypercall(struct kvm_vcpu *vcpu);
 
-int kvm_mmu_page_fault(struct kvm_vcpu *vcpu, gva_t gva, u64 error_code,
+int kvm_mmu_page_fault(struct kvm_vcpu *vcpu, gpa_t cr2_or_gpa, u64 error_code,
 		       void *insn, int insn_len);
 void kvm_mmu_invlpg(struct kvm_vcpu *vcpu, gva_t gva);
 void kvm_mmu_invpcid_gva(struct kvm_vcpu *vcpu, gva_t gva, unsigned long pcid);
@@ -1614,7 +1641,6 @@ void __kvm_request_immediate_exit(struct kvm_vcpu *vcpu);
 int kvm_is_in_guest(void);
 
 int __x86_set_memory_region(struct kvm *kvm, int id, gpa_t gpa, u32 size);
-int x86_set_memory_region(struct kvm *kvm, int id, gpa_t gpa, u32 size);
 bool kvm_vcpu_is_reset_bsp(struct kvm_vcpu *vcpu);
 bool kvm_vcpu_is_bsp(struct kvm_vcpu *vcpu);
 
diff --git a/arch/x86/include/asm/mmu.h b/arch/x86/include/asm/mmu.h
index e78c7db87801..bdeae9291e5c 100644
--- a/arch/x86/include/asm/mmu.h
+++ b/arch/x86/include/asm/mmu.h
@@ -50,10 +50,6 @@ typedef struct {
 	u16 pkey_allocation_map;
 	s16 execute_only_pkey;
 #endif
-#ifdef CONFIG_X86_INTEL_MPX
-	/* address of the bounds directory */
-	void __user *bd_addr;
-#endif
 } mm_context_t;
 
 #define INIT_MM_CONTEXT(mm)						\
diff --git a/arch/x86/include/asm/mmu_context.h b/arch/x86/include/asm/mmu_context.h
index b243234e90cb..b538d9ddee9c 100644
--- a/arch/x86/include/asm/mmu_context.h
+++ b/arch/x86/include/asm/mmu_context.h
@@ -12,7 +12,6 @@
 #include <asm/pgalloc.h>
 #include <asm/tlbflush.h>
 #include <asm/paravirt.h>
-#include <asm/mpx.h>
 #include <asm/debugreg.h>
 
 extern atomic64_t last_mm_ctx_id;
@@ -200,34 +199,9 @@ static inline bool is_64bit_mm(struct mm_struct *mm)
 }
 #endif
 
-static inline void arch_bprm_mm_init(struct mm_struct *mm,
-		struct vm_area_struct *vma)
-{
-	mpx_mm_init(mm);
-}
-
 static inline void arch_unmap(struct mm_struct *mm, unsigned long start,
 			      unsigned long end)
 {
-	/*
-	 * mpx_notify_unmap() goes and reads a rarely-hot
-	 * cacheline in the mm_struct.  That can be expensive
-	 * enough to be seen in profiles.
-	 *
-	 * The mpx_notify_unmap() call and its contents have been
-	 * observed to affect munmap() performance on hardware
-	 * where MPX is not present.
-	 *
-	 * The unlikely() optimizes for the fast case: no MPX
-	 * in the CPU, or no MPX use in the process.  Even if
-	 * we get this wrong (in the unlikely event that MPX
-	 * is widely enabled on some system) the overhead of
-	 * MPX itself (reading bounds tables) is expected to
-	 * overwhelm the overhead of getting this unlikely()
-	 * consistently wrong.
-	 */
-	if (unlikely(cpu_feature_enabled(X86_FEATURE_MPX)))
-		mpx_notify_unmap(mm, start, end);
 }
 
 /*
diff --git a/arch/x86/include/asm/mpx.h b/arch/x86/include/asm/mpx.h
deleted file mode 100644
index 143a5c193ed3..000000000000
--- a/arch/x86/include/asm/mpx.h
+++ /dev/null
@@ -1,116 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ASM_X86_MPX_H
-#define _ASM_X86_MPX_H
-
-#include <linux/types.h>
-#include <linux/mm_types.h>
-
-#include <asm/ptrace.h>
-#include <asm/insn.h>
-
-/*
- * NULL is theoretically a valid place to put the bounds
- * directory, so point this at an invalid address.
- */
-#define MPX_INVALID_BOUNDS_DIR	((void __user *)-1)
-#define MPX_BNDCFG_ENABLE_FLAG	0x1
-#define MPX_BD_ENTRY_VALID_FLAG	0x1
-
-/*
- * The upper 28 bits [47:20] of the virtual address in 64-bit
- * are used to index into bounds directory (BD).
- *
- * The directory is 2G (2^31) in size, and with 8-byte entries
- * it has 2^28 entries.
- */
-#define MPX_BD_SIZE_BYTES_64	(1UL<<31)
-#define MPX_BD_ENTRY_BYTES_64	8
-#define MPX_BD_NR_ENTRIES_64	(MPX_BD_SIZE_BYTES_64/MPX_BD_ENTRY_BYTES_64)
-
-/*
- * The 32-bit directory is 4MB (2^22) in size, and with 4-byte
- * entries it has 2^20 entries.
- */
-#define MPX_BD_SIZE_BYTES_32	(1UL<<22)
-#define MPX_BD_ENTRY_BYTES_32	4
-#define MPX_BD_NR_ENTRIES_32	(MPX_BD_SIZE_BYTES_32/MPX_BD_ENTRY_BYTES_32)
-
-/*
- * A 64-bit table is 4MB total in size, and an entry is
- * 4 64-bit pointers in size.
- */
-#define MPX_BT_SIZE_BYTES_64	(1UL<<22)
-#define MPX_BT_ENTRY_BYTES_64	32
-#define MPX_BT_NR_ENTRIES_64	(MPX_BT_SIZE_BYTES_64/MPX_BT_ENTRY_BYTES_64)
-
-/*
- * A 32-bit table is 16kB total in size, and an entry is
- * 4 32-bit pointers in size.
- */
-#define MPX_BT_SIZE_BYTES_32	(1UL<<14)
-#define MPX_BT_ENTRY_BYTES_32	16
-#define MPX_BT_NR_ENTRIES_32	(MPX_BT_SIZE_BYTES_32/MPX_BT_ENTRY_BYTES_32)
-
-#define MPX_BNDSTA_TAIL		2
-#define MPX_BNDCFG_TAIL		12
-#define MPX_BNDSTA_ADDR_MASK	(~((1UL<<MPX_BNDSTA_TAIL)-1))
-#define MPX_BNDCFG_ADDR_MASK	(~((1UL<<MPX_BNDCFG_TAIL)-1))
-#define MPX_BNDSTA_ERROR_CODE	0x3
-
-struct mpx_fault_info {
-	void __user *addr;
-	void __user *lower;
-	void __user *upper;
-};
-
-#ifdef CONFIG_X86_INTEL_MPX
-
-extern int mpx_fault_info(struct mpx_fault_info *info, struct pt_regs *regs);
-extern int mpx_handle_bd_fault(void);
-
-static inline int kernel_managing_mpx_tables(struct mm_struct *mm)
-{
-	return (mm->context.bd_addr != MPX_INVALID_BOUNDS_DIR);
-}
-
-static inline void mpx_mm_init(struct mm_struct *mm)
-{
-	/*
-	 * NULL is theoretically a valid place to put the bounds
-	 * directory, so point this at an invalid address.
-	 */
-	mm->context.bd_addr = MPX_INVALID_BOUNDS_DIR;
-}
-
-extern void mpx_notify_unmap(struct mm_struct *mm, unsigned long start, unsigned long end);
-extern unsigned long mpx_unmapped_area_check(unsigned long addr, unsigned long len, unsigned long flags);
-
-#else
-static inline int mpx_fault_info(struct mpx_fault_info *info, struct pt_regs *regs)
-{
-	return -EINVAL;
-}
-static inline int mpx_handle_bd_fault(void)
-{
-	return -EINVAL;
-}
-static inline int kernel_managing_mpx_tables(struct mm_struct *mm)
-{
-	return 0;
-}
-static inline void mpx_mm_init(struct mm_struct *mm)
-{
-}
-static inline void mpx_notify_unmap(struct mm_struct *mm,
-				    unsigned long start, unsigned long end)
-{
-}
-
-static inline unsigned long mpx_unmapped_area_check(unsigned long addr,
-		unsigned long len, unsigned long flags)
-{
-	return addr;
-}
-#endif /* CONFIG_X86_INTEL_MPX */
-
-#endif /* _ASM_X86_MPX_H */
diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h
index c1fdd43fe187..7ccb338507e3 100644
--- a/arch/x86/include/asm/pci.h
+++ b/arch/x86/include/asm/pci.h
@@ -25,7 +25,7 @@ struct pci_sysdata {
 	void		*fwnode;	/* IRQ domain for MSI assignment */
 #endif
 #if IS_ENABLED(CONFIG_VMD)
-	bool vmd_domain;		/* True if in Intel VMD domain */
+	struct pci_dev	*vmd_dev;	/* VMD Device if in Intel VMD domain */
 #endif
 };
 
@@ -33,14 +33,17 @@ extern int pci_routeirq;
 extern int noioapicquirk;
 extern int noioapicreroute;
 
+static inline struct pci_sysdata *to_pci_sysdata(const struct pci_bus *bus)
+{
+	return bus->sysdata;
+}
+
 #ifdef CONFIG_PCI
 
 #ifdef CONFIG_PCI_DOMAINS
 static inline int pci_domain_nr(struct pci_bus *bus)
 {
-	struct pci_sysdata *sd = bus->sysdata;
-
-	return sd->domain;
+	return to_pci_sysdata(bus)->domain;
 }
 
 static inline int pci_proc_domain(struct pci_bus *bus)
@@ -52,24 +55,20 @@ static inline int pci_proc_domain(struct pci_bus *bus)
 #ifdef CONFIG_PCI_MSI_IRQ_DOMAIN
 static inline void *_pci_root_bus_fwnode(struct pci_bus *bus)
 {
-	struct pci_sysdata *sd = bus->sysdata;
-
-	return sd->fwnode;
+	return to_pci_sysdata(bus)->fwnode;
 }
 
 #define pci_root_bus_fwnode	_pci_root_bus_fwnode
 #endif
 
+#if IS_ENABLED(CONFIG_VMD)
 static inline bool is_vmd(struct pci_bus *bus)
 {
-#if IS_ENABLED(CONFIG_VMD)
-	struct pci_sysdata *sd = bus->sysdata;
-
-	return sd->vmd_domain;
-#else
-	return false;
-#endif
+	return to_pci_sysdata(bus)->vmd_dev != NULL;
 }
+#else
+#define is_vmd(bus)		false
+#endif /* CONFIG_VMD */
 
 /* Can be used to override the logic in pci_scan_bus for skipping
    already-configured bus numbers - to be used for buggy BIOSes
@@ -124,9 +123,7 @@ void native_restore_msi_irqs(struct pci_dev *dev);
 /* Returns the node based on pci bus */
 static inline int __pcibus_to_node(const struct pci_bus *bus)
 {
-	const struct pci_sysdata *sd = bus->sysdata;
-
-	return sd->node;
+	return to_pci_sysdata(bus)->node;
 }
 
 static inline const struct cpumask *
diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index ad97dc155195..7e118660bbd9 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -29,8 +29,9 @@
 extern pgd_t early_top_pgt[PTRS_PER_PGD];
 int __init __early_make_pgtable(unsigned long address, pmdval_t pmd);
 
-void ptdump_walk_pgd_level(struct seq_file *m, pgd_t *pgd);
-void ptdump_walk_pgd_level_debugfs(struct seq_file *m, pgd_t *pgd, bool user);
+void ptdump_walk_pgd_level(struct seq_file *m, struct mm_struct *mm);
+void ptdump_walk_pgd_level_debugfs(struct seq_file *m, struct mm_struct *mm,
+				   bool user);
 void ptdump_walk_pgd_level_checkwx(void);
 void ptdump_walk_user_pgd_level_checkwx(void);
 
@@ -239,6 +240,7 @@ static inline unsigned long pgd_pfn(pgd_t pgd)
 	return (pgd_val(pgd) & PTE_PFN_MASK) >> PAGE_SHIFT;
 }
 
+#define p4d_leaf	p4d_large
 static inline int p4d_large(p4d_t p4d)
 {
 	/* No 512 GiB pages yet */
@@ -247,6 +249,7 @@ static inline int p4d_large(p4d_t p4d)
 
 #define pte_page(pte)	pfn_to_page(pte_pfn(pte))
 
+#define pmd_leaf	pmd_large
 static inline int pmd_large(pmd_t pte)
 {
 	return pmd_flags(pte) & _PAGE_PSE;
@@ -874,6 +877,7 @@ static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address)
 	return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(address);
 }
 
+#define pud_leaf	pud_large
 static inline int pud_large(pud_t pud)
 {
 	return (pud_val(pud) & (_PAGE_PSE | _PAGE_PRESENT)) ==
@@ -885,6 +889,7 @@ static inline int pud_bad(pud_t pud)
 	return (pud_flags(pud) & ~(_KERNPG_TABLE | _PAGE_USER)) != 0;
 }
 #else
+#define pud_leaf	pud_large
 static inline int pud_large(pud_t pud)
 {
 	return 0;
@@ -1233,6 +1238,7 @@ static inline bool pgdp_maps_userspace(void *__ptr)
 	return (((ptr & ~PAGE_MASK) / sizeof(pgd_t)) < PGD_KERNEL_START);
 }
 
+#define pgd_leaf	pgd_large
 static inline int pgd_large(pgd_t pgd) { return 0; }
 
 #ifdef CONFIG_PAGE_TABLE_ISOLATION
diff --git a/arch/x86/include/asm/pgtable_types.h b/arch/x86/include/asm/pgtable_types.h
index ea7400726d7a..0239998d8cdc 100644
--- a/arch/x86/include/asm/pgtable_types.h
+++ b/arch/x86/include/asm/pgtable_types.h
@@ -566,6 +566,10 @@ static inline void update_page_count(int level, unsigned long pages) { }
 extern pte_t *lookup_address(unsigned long address, unsigned int *level);
 extern pte_t *lookup_address_in_pgd(pgd_t *pgd, unsigned long address,
 				    unsigned int *level);
+
+struct mm_struct;
+extern pte_t *lookup_address_in_mm(struct mm_struct *mm, unsigned long address,
+				   unsigned int *level);
 extern pmd_t *lookup_pmd_address(unsigned long address);
 extern phys_addr_t slow_virt_to_phys(void *__address);
 extern int __init kernel_map_pages_in_pgd(pgd_t *pgd, u64 pfn,
diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index 6fb4870ed759..09705ccc393c 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -947,24 +947,6 @@ extern int set_tsc_mode(unsigned int val);
 
 DECLARE_PER_CPU(u64, msr_misc_features_shadow);
 
-/* Register/unregister a process' MPX related resource */
-#define MPX_ENABLE_MANAGEMENT()	mpx_enable_management()
-#define MPX_DISABLE_MANAGEMENT()	mpx_disable_management()
-
-#ifdef CONFIG_X86_INTEL_MPX
-extern int mpx_enable_management(void);
-extern int mpx_disable_management(void);
-#else
-static inline int mpx_enable_management(void)
-{
-	return -EINVAL;
-}
-static inline int mpx_disable_management(void)
-{
-	return -EINVAL;
-}
-#endif /* CONFIG_X86_INTEL_MPX */
-
 #ifdef CONFIG_CPU_SUP_AMD
 extern u16 amd_get_nb_id(int cpu);
 extern u32 amd_get_nodes_per_socket(void);
diff --git a/arch/x86/include/asm/tlb.h b/arch/x86/include/asm/tlb.h
index f23e7aaff4cd..820082bd6880 100644
--- a/arch/x86/include/asm/tlb.h
+++ b/arch/x86/include/asm/tlb.h
@@ -29,8 +29,8 @@ static inline void tlb_flush(struct mmu_gather *tlb)
  * shootdown, enablement code for several hypervisors overrides
  * .flush_tlb_others hook in pv_mmu_ops and implements it by issuing
  * a hypercall. To keep software pagetable walkers safe in this case we
- * switch to RCU based table free (HAVE_RCU_TABLE_FREE). See the comment
- * below 'ifdef CONFIG_HAVE_RCU_TABLE_FREE' in include/asm-generic/tlb.h
+ * switch to RCU based table free (MMU_GATHER_RCU_TABLE_FREE). See the comment
+ * below 'ifdef CONFIG_MMU_GATHER_RCU_TABLE_FREE' in include/asm-generic/tlb.h
  * for more details.
  */
 static inline void __tlb_remove_table(void *table)
diff --git a/arch/x86/include/asm/trace/mpx.h b/arch/x86/include/asm/trace/mpx.h
deleted file mode 100644
index 54133017267c..000000000000
--- a/arch/x86/include/asm/trace/mpx.h
+++ /dev/null
@@ -1,134 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#undef TRACE_SYSTEM
-#define TRACE_SYSTEM mpx
-
-#if !defined(_TRACE_MPX_H) || defined(TRACE_HEADER_MULTI_READ)
-#define _TRACE_MPX_H
-
-#include <linux/tracepoint.h>
-
-#ifdef CONFIG_X86_INTEL_MPX
-
-TRACE_EVENT(mpx_bounds_register_exception,
-
-	TP_PROTO(void __user *addr_referenced,
-		 const struct mpx_bndreg *bndreg),
-	TP_ARGS(addr_referenced, bndreg),
-
-	TP_STRUCT__entry(
-		__field(void __user *, addr_referenced)
-		__field(u64, lower_bound)
-		__field(u64, upper_bound)
-	),
-
-	TP_fast_assign(
-		__entry->addr_referenced = addr_referenced;
-		__entry->lower_bound = bndreg->lower_bound;
-		__entry->upper_bound = bndreg->upper_bound;
-	),
-	/*
-	 * Note that we are printing out the '~' of the upper
-	 * bounds register here.  It is actually stored in its
-	 * one's complement form so that its 'init' state
-	 * corresponds to all 0's.  But, that looks like
-	 * gibberish when printed out, so print out the 1's
-	 * complement instead of the actual value here.  Note
-	 * though that you still need to specify filters for the
-	 * actual value, not the displayed one.
-	 */
-	TP_printk("address referenced: 0x%p bounds: lower: 0x%llx ~upper: 0x%llx",
-		__entry->addr_referenced,
-		__entry->lower_bound,
-		~__entry->upper_bound
-	)
-);
-
-TRACE_EVENT(bounds_exception_mpx,
-
-	TP_PROTO(const struct mpx_bndcsr *bndcsr),
-	TP_ARGS(bndcsr),
-
-	TP_STRUCT__entry(
-		__field(u64, bndcfgu)
-		__field(u64, bndstatus)
-	),
-
-	TP_fast_assign(
-		/* need to get rid of the 'const' on bndcsr */
-		__entry->bndcfgu   = (u64)bndcsr->bndcfgu;
-		__entry->bndstatus = (u64)bndcsr->bndstatus;
-	),
-
-	TP_printk("bndcfgu:0x%llx bndstatus:0x%llx",
-		__entry->bndcfgu,
-		__entry->bndstatus)
-);
-
-DECLARE_EVENT_CLASS(mpx_range_trace,
-
-	TP_PROTO(unsigned long start,
-		 unsigned long end),
-	TP_ARGS(start, end),
-
-	TP_STRUCT__entry(
-		__field(unsigned long, start)
-		__field(unsigned long, end)
-	),
-
-	TP_fast_assign(
-		__entry->start = start;
-		__entry->end   = end;
-	),
-
-	TP_printk("[0x%p:0x%p]",
-		(void *)__entry->start,
-		(void *)__entry->end
-	)
-);
-
-DEFINE_EVENT(mpx_range_trace, mpx_unmap_zap,
-	TP_PROTO(unsigned long start, unsigned long end),
-	TP_ARGS(start, end)
-);
-
-DEFINE_EVENT(mpx_range_trace, mpx_unmap_search,
-	TP_PROTO(unsigned long start, unsigned long end),
-	TP_ARGS(start, end)
-);
-
-TRACE_EVENT(mpx_new_bounds_table,
-
-	TP_PROTO(unsigned long table_vaddr),
-	TP_ARGS(table_vaddr),
-
-	TP_STRUCT__entry(
-		__field(unsigned long, table_vaddr)
-	),
-
-	TP_fast_assign(
-		__entry->table_vaddr = table_vaddr;
-	),
-
-	TP_printk("table vaddr:%p", (void *)__entry->table_vaddr)
-);
-
-#else
-
-/*
- * This gets used outside of MPX-specific code, so we need a stub.
- */
-static inline
-void trace_bounds_exception_mpx(const struct mpx_bndcsr *bndcsr)
-{
-}
-
-#endif /* CONFIG_X86_INTEL_MPX */
-
-#undef TRACE_INCLUDE_PATH
-#define TRACE_INCLUDE_PATH asm/trace/
-#undef TRACE_INCLUDE_FILE
-#define TRACE_INCLUDE_FILE mpx
-#endif /* _TRACE_MPX_H */
-
-/* This part must be outside protection */
-#include <trace/define_trace.h>
diff --git a/arch/x86/include/asm/vmx.h b/arch/x86/include/asm/vmx.h
index 9fbba31be825..2a85287b3685 100644
--- a/arch/x86/include/asm/vmx.h
+++ b/arch/x86/include/asm/vmx.h
@@ -22,8 +22,8 @@
 /*
  * Definitions of Primary Processor-Based VM-Execution Controls.
  */
-#define CPU_BASED_VIRTUAL_INTR_PENDING          VMCS_CONTROL_BIT(VIRTUAL_INTR_PENDING)
-#define CPU_BASED_USE_TSC_OFFSETING             VMCS_CONTROL_BIT(TSC_OFFSETTING)
+#define CPU_BASED_INTR_WINDOW_EXITING           VMCS_CONTROL_BIT(INTR_WINDOW_EXITING)
+#define CPU_BASED_USE_TSC_OFFSETTING            VMCS_CONTROL_BIT(USE_TSC_OFFSETTING)
 #define CPU_BASED_HLT_EXITING                   VMCS_CONTROL_BIT(HLT_EXITING)
 #define CPU_BASED_INVLPG_EXITING                VMCS_CONTROL_BIT(INVLPG_EXITING)
 #define CPU_BASED_MWAIT_EXITING                 VMCS_CONTROL_BIT(MWAIT_EXITING)
@@ -34,7 +34,7 @@
 #define CPU_BASED_CR8_LOAD_EXITING              VMCS_CONTROL_BIT(CR8_LOAD_EXITING)
 #define CPU_BASED_CR8_STORE_EXITING             VMCS_CONTROL_BIT(CR8_STORE_EXITING)
 #define CPU_BASED_TPR_SHADOW                    VMCS_CONTROL_BIT(VIRTUAL_TPR)
-#define CPU_BASED_VIRTUAL_NMI_PENDING		VMCS_CONTROL_BIT(VIRTUAL_NMI_PENDING)
+#define CPU_BASED_NMI_WINDOW_EXITING		VMCS_CONTROL_BIT(NMI_WINDOW_EXITING)
 #define CPU_BASED_MOV_DR_EXITING                VMCS_CONTROL_BIT(MOV_DR_EXITING)
 #define CPU_BASED_UNCOND_IO_EXITING             VMCS_CONTROL_BIT(UNCOND_IO_EXITING)
 #define CPU_BASED_USE_IO_BITMAPS                VMCS_CONTROL_BIT(USE_IO_BITMAPS)
diff --git a/arch/x86/include/asm/vmxfeatures.h b/arch/x86/include/asm/vmxfeatures.h
index 0d04d8bf15a5..a50e4a0de315 100644
--- a/arch/x86/include/asm/vmxfeatures.h
+++ b/arch/x86/include/asm/vmxfeatures.h
@@ -34,8 +34,8 @@
 #define VMX_FEATURE_EPTP_SWITCHING	( 0*32+ 28) /* EPTP switching (in guest) */
 
 /* Primary Processor-Based VM-Execution Controls, word 1 */
-#define VMX_FEATURE_VIRTUAL_INTR_PENDING ( 1*32+  2) /* "" VM-Exit if INTRs are unblocked in guest */
-#define VMX_FEATURE_TSC_OFFSETTING	( 1*32+  3) /* "tsc_offset" Offset hardware TSC when read in guest */
+#define VMX_FEATURE_INTR_WINDOW_EXITING ( 1*32+  2) /* "" VM-Exit if INTRs are unblocked in guest */
+#define VMX_FEATURE_USE_TSC_OFFSETTING	( 1*32+  3) /* "tsc_offset" Offset hardware TSC when read in guest */
 #define VMX_FEATURE_HLT_EXITING		( 1*32+  7) /* "" VM-Exit on HLT */
 #define VMX_FEATURE_INVLPG_EXITING	( 1*32+  9) /* "" VM-Exit on INVLPG */
 #define VMX_FEATURE_MWAIT_EXITING	( 1*32+ 10) /* "" VM-Exit on MWAIT */
@@ -46,7 +46,7 @@
 #define VMX_FEATURE_CR8_LOAD_EXITING	( 1*32+ 19) /* "" VM-Exit on writes to CR8 */
 #define VMX_FEATURE_CR8_STORE_EXITING	( 1*32+ 20) /* "" VM-Exit on reads from CR8 */
 #define VMX_FEATURE_VIRTUAL_TPR		( 1*32+ 21) /* "vtpr" TPR virtualization, a.k.a. TPR shadow */
-#define VMX_FEATURE_VIRTUAL_NMI_PENDING	( 1*32+ 22) /* "" VM-Exit if NMIs are unblocked in guest */
+#define VMX_FEATURE_NMI_WINDOW_EXITING	( 1*32+ 22) /* "" VM-Exit if NMIs are unblocked in guest */
 #define VMX_FEATURE_MOV_DR_EXITING	( 1*32+ 23) /* "" VM-Exit on accesses to debug registers */
 #define VMX_FEATURE_UNCOND_IO_EXITING	( 1*32+ 24) /* "" VM-Exit on *all* IN{S} and OUT{S}*/
 #define VMX_FEATURE_USE_IO_BITMAPS	( 1*32+ 25) /* "" VM-Exit based on I/O port */
diff --git a/arch/x86/include/uapi/asm/vmx.h b/arch/x86/include/uapi/asm/vmx.h
index 3eb8411ab60e..e95b72ec19bc 100644
--- a/arch/x86/include/uapi/asm/vmx.h
+++ b/arch/x86/include/uapi/asm/vmx.h
@@ -33,7 +33,7 @@
 #define EXIT_REASON_TRIPLE_FAULT        2
 #define EXIT_REASON_INIT_SIGNAL			3
 
-#define EXIT_REASON_PENDING_INTERRUPT   7
+#define EXIT_REASON_INTERRUPT_WINDOW    7
 #define EXIT_REASON_NMI_WINDOW          8
 #define EXIT_REASON_TASK_SWITCH         9
 #define EXIT_REASON_CPUID               10
@@ -94,7 +94,7 @@
 	{ EXIT_REASON_EXTERNAL_INTERRUPT,    "EXTERNAL_INTERRUPT" }, \
 	{ EXIT_REASON_TRIPLE_FAULT,          "TRIPLE_FAULT" }, \
 	{ EXIT_REASON_INIT_SIGNAL,           "INIT_SIGNAL" }, \
-	{ EXIT_REASON_PENDING_INTERRUPT,     "PENDING_INTERRUPT" }, \
+	{ EXIT_REASON_INTERRUPT_WINDOW,      "INTERRUPT_WINDOW" }, \
 	{ EXIT_REASON_NMI_WINDOW,            "NMI_WINDOW" }, \
 	{ EXIT_REASON_TASK_SWITCH,           "TASK_SWITCH" }, \
 	{ EXIT_REASON_CPUID,                 "CPUID" }, \
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 6175e370ee4a..9b294c13809a 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -94,6 +94,7 @@ obj-$(CONFIG_FUNCTION_TRACER)	+= ftrace_$(BITS).o
 obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o
 obj-$(CONFIG_FTRACE_SYSCALLS)	+= ftrace.o
 obj-$(CONFIG_X86_TSC)		+= trace_clock.o
+obj-$(CONFIG_CRASH_CORE)	+= crash_core_$(BITS).o
 obj-$(CONFIG_KEXEC_CORE)	+= machine_kexec_$(BITS).o
 obj-$(CONFIG_KEXEC_CORE)	+= relocate_kernel_$(BITS).o crash.o
 obj-$(CONFIG_KEXEC_FILE)	+= kexec-bzimage64.o
diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c
index 34360ca301a2..15ac0d5f4b40 100644
--- a/arch/x86/kernel/alternative.c
+++ b/arch/x86/kernel/alternative.c
@@ -23,6 +23,7 @@
 #include <asm/nmi.h>
 #include <asm/cacheflush.h>
 #include <asm/tlbflush.h>
+#include <asm/insn.h>
 #include <asm/io.h>
 #include <asm/fixmap.h>
 
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 86b8241c8209..52c9bfbbdb2a 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -164,22 +164,6 @@ DEFINE_PER_CPU_PAGE_ALIGNED(struct gdt_page, gdt_page) = { .gdt = {
 } };
 EXPORT_PER_CPU_SYMBOL_GPL(gdt_page);
 
-static int __init x86_mpx_setup(char *s)
-{
-	/* require an exact match without trailing characters */
-	if (strlen(s))
-		return 0;
-
-	/* do not emit a message if the feature is not present */
-	if (!boot_cpu_has(X86_FEATURE_MPX))
-		return 1;
-
-	setup_clear_cpu_cap(X86_FEATURE_MPX);
-	pr_info("nompx: Intel Memory Protection Extensions (MPX) disabled\n");
-	return 1;
-}
-__setup("nompx", x86_mpx_setup);
-
 #ifdef CONFIG_X86_64
 static int __init x86_nopcid_setup(char *s)
 {
@@ -306,8 +290,6 @@ static inline void squash_the_stupid_serial_number(struct cpuinfo_x86 *c)
 static __init int setup_disable_smep(char *arg)
 {
 	setup_clear_cpu_cap(X86_FEATURE_SMEP);
-	/* Check for things that depend on SMEP being enabled: */
-	check_mpx_erratum(&boot_cpu_data);
 	return 1;
 }
 __setup("nosmep", setup_disable_smep);
diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c
index 57473e2c0869..be82cd5841c3 100644
--- a/arch/x86/kernel/cpu/intel.c
+++ b/arch/x86/kernel/cpu/intel.c
@@ -32,41 +32,6 @@
 #endif
 
 /*
- * Just in case our CPU detection goes bad, or you have a weird system,
- * allow a way to override the automatic disabling of MPX.
- */
-static int forcempx;
-
-static int __init forcempx_setup(char *__unused)
-{
-	forcempx = 1;
-
-	return 1;
-}
-__setup("intel-skd-046-workaround=disable", forcempx_setup);
-
-void check_mpx_erratum(struct cpuinfo_x86 *c)
-{
-	if (forcempx)
-		return;
-	/*
-	 * Turn off the MPX feature on CPUs where SMEP is not
-	 * available or disabled.
-	 *
-	 * Works around Intel Erratum SKD046: "Branch Instructions
-	 * May Initialize MPX Bound Registers Incorrectly".
-	 *
-	 * This might falsely disable MPX on systems without
-	 * SMEP, like Atom processors without SMEP.  But there
-	 * is no such hardware known at the moment.
-	 */
-	if (cpu_has(c, X86_FEATURE_MPX) && !cpu_has(c, X86_FEATURE_SMEP)) {
-		setup_clear_cpu_cap(X86_FEATURE_MPX);
-		pr_warn("x86/mpx: Disabling MPX since SMEP not present\n");
-	}
-}
-
-/*
  * Processors which have self-snooping capability can handle conflicting
  * memory type across CPUs by snooping its own cache. However, there exists
  * CPU models in which having conflicting memory types still leads to
@@ -330,7 +295,6 @@ static void early_init_intel(struct cpuinfo_x86 *c)
 			c->x86_coreid_bits = get_count_order((ebx >> 16) & 0xff);
 	}
 
-	check_mpx_erratum(c);
 	check_memory_type_self_snoop_errata(c);
 
 	/*
diff --git a/arch/x86/kernel/cpu/mtrr/if.c b/arch/x86/kernel/cpu/mtrr/if.c
index da532f656a7b..a5c506f6da7f 100644
--- a/arch/x86/kernel/cpu/mtrr/if.c
+++ b/arch/x86/kernel/cpu/mtrr/if.c
@@ -396,15 +396,16 @@ static int mtrr_open(struct inode *inode, struct file *file)
 	return single_open(file, mtrr_seq_show, NULL);
 }
 
-static const struct file_operations mtrr_fops = {
-	.owner			= THIS_MODULE,
-	.open			= mtrr_open,
-	.read			= seq_read,
-	.llseek			= seq_lseek,
-	.write			= mtrr_write,
-	.unlocked_ioctl		= mtrr_ioctl,
-	.compat_ioctl		= mtrr_ioctl,
-	.release		= mtrr_close,
+static const struct proc_ops mtrr_proc_ops = {
+	.proc_open		= mtrr_open,
+	.proc_read		= seq_read,
+	.proc_lseek		= seq_lseek,
+	.proc_write		= mtrr_write,
+	.proc_ioctl		= mtrr_ioctl,
+#ifdef CONFIG_COMPAT
+	.proc_compat_ioctl	= mtrr_ioctl,
+#endif
+	.proc_release		= mtrr_close,
 };
 
 static int __init mtrr_if_init(void)
@@ -417,7 +418,7 @@ static int __init mtrr_if_init(void)
 	    (!cpu_has(c, X86_FEATURE_CENTAUR_MCR)))
 		return -ENODEV;
 
-	proc_create("mtrr", S_IWUSR | S_IRUGO, NULL, &mtrr_fops);
+	proc_create("mtrr", S_IWUSR | S_IRUGO, NULL, &mtrr_proc_ops);
 	return 0;
 }
 arch_initcall(mtrr_if_init);
diff --git a/arch/x86/kernel/cpu/resctrl/rdtgroup.c b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
index 1504bcabc63c..064e9ef44cd6 100644
--- a/arch/x86/kernel/cpu/resctrl/rdtgroup.c
+++ b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
@@ -2060,7 +2060,7 @@ static int rdt_get_tree(struct fs_context *fc)
 
 	if (rdt_mon_capable) {
 		ret = mongroup_create_dir(rdtgroup_default.kn,
-					  NULL, "mon_groups",
+					  &rdtgroup_default, "mon_groups",
 					  &kn_mongrp);
 		if (ret < 0)
 			goto out_info;
@@ -2127,25 +2127,20 @@ enum rdt_param {
 	nr__rdt_params
 };
 
-static const struct fs_parameter_spec rdt_param_specs[] = {
+static const struct fs_parameter_spec rdt_fs_parameters[] = {
 	fsparam_flag("cdp",		Opt_cdp),
 	fsparam_flag("cdpl2",		Opt_cdpl2),
 	fsparam_flag("mba_MBps",	Opt_mba_mbps),
 	{}
 };
 
-static const struct fs_parameter_description rdt_fs_parameters = {
-	.name		= "rdt",
-	.specs		= rdt_param_specs,
-};
-
 static int rdt_parse_param(struct fs_context *fc, struct fs_parameter *param)
 {
 	struct rdt_fs_context *ctx = rdt_fc2context(fc);
 	struct fs_parse_result result;
 	int opt;
 
-	opt = fs_parse(fc, &rdt_fs_parameters, param, &result);
+	opt = fs_parse(fc, rdt_fs_parameters, param, &result);
 	if (opt < 0)
 		return opt;
 
@@ -2295,7 +2290,11 @@ static void free_all_child_rdtgrp(struct rdtgroup *rdtgrp)
 	list_for_each_entry_safe(sentry, stmp, head, mon.crdtgrp_list) {
 		free_rmid(sentry->mon.rmid);
 		list_del(&sentry->mon.crdtgrp_list);
-		kfree(sentry);
+
+		if (atomic_read(&sentry->waitcount) != 0)
+			sentry->flags = RDT_DELETED;
+		else
+			kfree(sentry);
 	}
 }
 
@@ -2333,7 +2332,11 @@ static void rmdir_all_sub(void)
 
 		kernfs_remove(rdtgrp->kn);
 		list_del(&rdtgrp->rdtgroup_list);
-		kfree(rdtgrp);
+
+		if (atomic_read(&rdtgrp->waitcount) != 0)
+			rdtgrp->flags = RDT_DELETED;
+		else
+			kfree(rdtgrp);
 	}
 	/* Notify online CPUs to update per cpu storage and PQR_ASSOC MSR */
 	update_closid_rmid(cpu_online_mask, &rdtgroup_default);
@@ -2370,7 +2373,7 @@ static void rdt_kill_sb(struct super_block *sb)
 static struct file_system_type rdt_fs_type = {
 	.name			= "resctrl",
 	.init_fs_context	= rdt_init_fs_context,
-	.parameters		= &rdt_fs_parameters,
+	.parameters		= rdt_fs_parameters,
 	.kill_sb		= rdt_kill_sb,
 };
 
@@ -2536,7 +2539,7 @@ static int mkdir_mondata_all(struct kernfs_node *parent_kn,
 	/*
 	 * Create the mon_data directory first.
 	 */
-	ret = mongroup_create_dir(parent_kn, NULL, "mon_data", &kn);
+	ret = mongroup_create_dir(parent_kn, prgrp, "mon_data", &kn);
 	if (ret)
 		return ret;
 
@@ -2726,7 +2729,6 @@ static int rdtgroup_init_alloc(struct rdtgroup *rdtgrp)
 }
 
 static int mkdir_rdt_prepare(struct kernfs_node *parent_kn,
-			     struct kernfs_node *prgrp_kn,
 			     const char *name, umode_t mode,
 			     enum rdt_group_type rtype, struct rdtgroup **r)
 {
@@ -2735,7 +2737,7 @@ static int mkdir_rdt_prepare(struct kernfs_node *parent_kn,
 	uint files = 0;
 	int ret;
 
-	prdtgrp = rdtgroup_kn_lock_live(prgrp_kn);
+	prdtgrp = rdtgroup_kn_lock_live(parent_kn);
 	if (!prdtgrp) {
 		ret = -ENODEV;
 		goto out_unlock;
@@ -2808,7 +2810,7 @@ static int mkdir_rdt_prepare(struct kernfs_node *parent_kn,
 	kernfs_activate(kn);
 
 	/*
-	 * The caller unlocks the prgrp_kn upon success.
+	 * The caller unlocks the parent_kn upon success.
 	 */
 	return 0;
 
@@ -2819,7 +2821,7 @@ out_destroy:
 out_free_rgrp:
 	kfree(rdtgrp);
 out_unlock:
-	rdtgroup_kn_unlock(prgrp_kn);
+	rdtgroup_kn_unlock(parent_kn);
 	return ret;
 }
 
@@ -2836,15 +2838,12 @@ static void mkdir_rdt_prepare_clean(struct rdtgroup *rgrp)
  * to monitor a subset of tasks and cpus in its parent ctrl_mon group.
  */
 static int rdtgroup_mkdir_mon(struct kernfs_node *parent_kn,
-			      struct kernfs_node *prgrp_kn,
-			      const char *name,
-			      umode_t mode)
+			      const char *name, umode_t mode)
 {
 	struct rdtgroup *rdtgrp, *prgrp;
 	int ret;
 
-	ret = mkdir_rdt_prepare(parent_kn, prgrp_kn, name, mode, RDTMON_GROUP,
-				&rdtgrp);
+	ret = mkdir_rdt_prepare(parent_kn, name, mode, RDTMON_GROUP, &rdtgrp);
 	if (ret)
 		return ret;
 
@@ -2857,7 +2856,7 @@ static int rdtgroup_mkdir_mon(struct kernfs_node *parent_kn,
 	 */
 	list_add_tail(&rdtgrp->mon.crdtgrp_list, &prgrp->mon.crdtgrp_list);
 
-	rdtgroup_kn_unlock(prgrp_kn);
+	rdtgroup_kn_unlock(parent_kn);
 	return ret;
 }
 
@@ -2866,7 +2865,6 @@ static int rdtgroup_mkdir_mon(struct kernfs_node *parent_kn,
  * to allocate and monitor resources.
  */
 static int rdtgroup_mkdir_ctrl_mon(struct kernfs_node *parent_kn,
-				   struct kernfs_node *prgrp_kn,
 				   const char *name, umode_t mode)
 {
 	struct rdtgroup *rdtgrp;
@@ -2874,8 +2872,7 @@ static int rdtgroup_mkdir_ctrl_mon(struct kernfs_node *parent_kn,
 	u32 closid;
 	int ret;
 
-	ret = mkdir_rdt_prepare(parent_kn, prgrp_kn, name, mode, RDTCTRL_GROUP,
-				&rdtgrp);
+	ret = mkdir_rdt_prepare(parent_kn, name, mode, RDTCTRL_GROUP, &rdtgrp);
 	if (ret)
 		return ret;
 
@@ -2900,7 +2897,7 @@ static int rdtgroup_mkdir_ctrl_mon(struct kernfs_node *parent_kn,
 		 * Create an empty mon_groups directory to hold the subset
 		 * of tasks and cpus to monitor.
 		 */
-		ret = mongroup_create_dir(kn, NULL, "mon_groups", NULL);
+		ret = mongroup_create_dir(kn, rdtgrp, "mon_groups", NULL);
 		if (ret) {
 			rdt_last_cmd_puts("kernfs subdir error\n");
 			goto out_del_list;
@@ -2916,7 +2913,7 @@ out_id_free:
 out_common_fail:
 	mkdir_rdt_prepare_clean(rdtgrp);
 out_unlock:
-	rdtgroup_kn_unlock(prgrp_kn);
+	rdtgroup_kn_unlock(parent_kn);
 	return ret;
 }
 
@@ -2949,14 +2946,14 @@ static int rdtgroup_mkdir(struct kernfs_node *parent_kn, const char *name,
 	 * subdirectory
 	 */
 	if (rdt_alloc_capable && parent_kn == rdtgroup_default.kn)
-		return rdtgroup_mkdir_ctrl_mon(parent_kn, parent_kn, name, mode);
+		return rdtgroup_mkdir_ctrl_mon(parent_kn, name, mode);
 
 	/*
 	 * If RDT monitoring is supported and the parent directory is a valid
 	 * "mon_groups" directory, add a monitoring subdirectory.
 	 */
 	if (rdt_mon_capable && is_mon_groups(parent_kn, name))
-		return rdtgroup_mkdir_mon(parent_kn, parent_kn->parent, name, mode);
+		return rdtgroup_mkdir_mon(parent_kn, name, mode);
 
 	return -EPERM;
 }
@@ -3042,13 +3039,13 @@ static int rdtgroup_rmdir_ctrl(struct kernfs_node *kn, struct rdtgroup *rdtgrp,
 	closid_free(rdtgrp->closid);
 	free_rmid(rdtgrp->mon.rmid);
 
+	rdtgroup_ctrl_remove(kn, rdtgrp);
+
 	/*
 	 * Free all the child monitor group rmids.
 	 */
 	free_all_child_rdtgrp(rdtgrp);
 
-	rdtgroup_ctrl_remove(kn, rdtgrp);
-
 	return 0;
 }
 
diff --git a/arch/x86/kernel/crash_core_32.c b/arch/x86/kernel/crash_core_32.c
new file mode 100644
index 000000000000..c0159a7bca6d
--- /dev/null
+++ b/arch/x86/kernel/crash_core_32.c
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/crash_core.h>
+
+#include <asm/pgtable.h>
+#include <asm/setup.h>
+
+void arch_crash_save_vmcoreinfo(void)
+{
+#ifdef CONFIG_NUMA
+	VMCOREINFO_SYMBOL(node_data);
+	VMCOREINFO_LENGTH(node_data, MAX_NUMNODES);
+#endif
+#ifdef CONFIG_X86_PAE
+	VMCOREINFO_CONFIG(X86_PAE);
+#endif
+}
diff --git a/arch/x86/kernel/crash_core_64.c b/arch/x86/kernel/crash_core_64.c
new file mode 100644
index 000000000000..845a57eb4eb7
--- /dev/null
+++ b/arch/x86/kernel/crash_core_64.c
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/crash_core.h>
+
+#include <asm/pgtable.h>
+#include <asm/setup.h>
+
+void arch_crash_save_vmcoreinfo(void)
+{
+	u64 sme_mask = sme_me_mask;
+
+	VMCOREINFO_NUMBER(phys_base);
+	VMCOREINFO_SYMBOL(init_top_pgt);
+	vmcoreinfo_append_str("NUMBER(pgtable_l5_enabled)=%d\n",
+			      pgtable_l5_enabled());
+
+#ifdef CONFIG_NUMA
+	VMCOREINFO_SYMBOL(node_data);
+	VMCOREINFO_LENGTH(node_data, MAX_NUMNODES);
+#endif
+	vmcoreinfo_append_str("KERNELOFFSET=%lx\n", kaslr_offset());
+	VMCOREINFO_NUMBER(KERNEL_IMAGE_SIZE);
+	VMCOREINFO_NUMBER(sme_mask);
+}
diff --git a/arch/x86/kernel/kvm.c b/arch/x86/kernel/kvm.c
index 81045aabb6f4..d817f255aed8 100644
--- a/arch/x86/kernel/kvm.c
+++ b/arch/x86/kernel/kvm.c
@@ -736,6 +736,9 @@ static __init int kvm_setup_pv_tlb_flush(void)
 {
 	int cpu;
 
+	if (!kvm_para_available() || nopv)
+		return 0;
+
 	if (kvm_para_has_feature(KVM_FEATURE_PV_TLB_FLUSH) &&
 	    !kvm_para_has_hint(KVM_HINTS_REALTIME) &&
 	    kvm_para_has_feature(KVM_FEATURE_STEAL_TIME)) {
diff --git a/arch/x86/kernel/machine_kexec_32.c b/arch/x86/kernel/machine_kexec_32.c
index 7b45e8daad22..02bddfc122a4 100644
--- a/arch/x86/kernel/machine_kexec_32.c
+++ b/arch/x86/kernel/machine_kexec_32.c
@@ -250,15 +250,3 @@ void machine_kexec(struct kimage *image)
 
 	__ftrace_enabled_restore(save_ftrace_enabled);
 }
-
-void arch_crash_save_vmcoreinfo(void)
-{
-#ifdef CONFIG_NUMA
-	VMCOREINFO_SYMBOL(node_data);
-	VMCOREINFO_LENGTH(node_data, MAX_NUMNODES);
-#endif
-#ifdef CONFIG_X86_PAE
-	VMCOREINFO_CONFIG(X86_PAE);
-#endif
-}
-
diff --git a/arch/x86/kernel/machine_kexec_64.c b/arch/x86/kernel/machine_kexec_64.c
index 16e125a50b33..ad5cdd6a5f23 100644
--- a/arch/x86/kernel/machine_kexec_64.c
+++ b/arch/x86/kernel/machine_kexec_64.c
@@ -398,25 +398,6 @@ void machine_kexec(struct kimage *image)
 	__ftrace_enabled_restore(save_ftrace_enabled);
 }
 
-void arch_crash_save_vmcoreinfo(void)
-{
-	u64 sme_mask = sme_me_mask;
-
-	VMCOREINFO_NUMBER(phys_base);
-	VMCOREINFO_SYMBOL(init_top_pgt);
-	vmcoreinfo_append_str("NUMBER(pgtable_l5_enabled)=%d\n",
-			pgtable_l5_enabled());
-
-#ifdef CONFIG_NUMA
-	VMCOREINFO_SYMBOL(node_data);
-	VMCOREINFO_LENGTH(node_data, MAX_NUMNODES);
-#endif
-	vmcoreinfo_append_str("KERNELOFFSET=%lx\n",
-			      kaslr_offset());
-	VMCOREINFO_NUMBER(KERNEL_IMAGE_SIZE);
-	VMCOREINFO_NUMBER(sme_mask);
-}
-
 /* arch-dependent functionality related to kexec file-based syscall */
 
 #ifdef CONFIG_KEXEC_FILE
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 2441b64d061f..a74262c71484 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -893,8 +893,6 @@ void __init setup_arch(char **cmdline_p)
 	init_mm.end_data = (unsigned long) _edata;
 	init_mm.brk = _brk_end;
 
-	mpx_mm_init(&init_mm);
-
 	code_resource.start = __pa_symbol(_text);
 	code_resource.end = __pa_symbol(_etext)-1;
 	rodata_resource.start = __pa_symbol(__start_rodata);
@@ -1228,8 +1226,6 @@ void __init setup_arch(char **cmdline_p)
 #if defined(CONFIG_VGA_CONSOLE)
 	if (!efi_enabled(EFI_BOOT) || (efi_mem_type(0xa0000) != EFI_CONVENTIONAL_MEMORY))
 		conswitchp = &vga_con;
-#elif defined(CONFIG_DUMMY_CONSOLE)
-	conswitchp = &dummy_con;
 #endif
 #endif
 	x86_init.oem.banner();
diff --git a/arch/x86/kernel/sys_x86_64.c b/arch/x86/kernel/sys_x86_64.c
index f7476ce23b6e..ca3c11a17b5a 100644
--- a/arch/x86/kernel/sys_x86_64.c
+++ b/arch/x86/kernel/sys_x86_64.c
@@ -22,7 +22,6 @@
 #include <asm/elf.h>
 #include <asm/ia32.h>
 #include <asm/syscalls.h>
-#include <asm/mpx.h>
 
 /*
  * Align a virtual address to avoid aliasing in the I$ on AMD F15h.
@@ -137,10 +136,6 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr,
 	struct vm_unmapped_area_info info;
 	unsigned long begin, end;
 
-	addr = mpx_unmapped_area_check(addr, len, flags);
-	if (IS_ERR_VALUE(addr))
-		return addr;
-
 	if (flags & MAP_FIXED)
 		return addr;
 
@@ -180,10 +175,6 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0,
 	unsigned long addr = addr0;
 	struct vm_unmapped_area_info info;
 
-	addr = mpx_unmapped_area_check(addr, len, flags);
-	if (IS_ERR_VALUE(addr))
-		return addr;
-
 	/* requested length too big for entire address space */
 	if (len > TASK_SIZE)
 		return -ENOMEM;
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index 9e6f822922a3..6ef00eb6fbb9 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -52,8 +52,6 @@
 #include <asm/mach_traps.h>
 #include <asm/alternative.h>
 #include <asm/fpu/xstate.h>
-#include <asm/trace/mpx.h>
-#include <asm/mpx.h>
 #include <asm/vm86.h>
 #include <asm/umip.h>
 #include <asm/insn.h>
@@ -436,8 +434,6 @@ dotraplinkage void do_double_fault(struct pt_regs *regs, long error_code, unsign
 
 dotraplinkage void do_bounds(struct pt_regs *regs, long error_code)
 {
-	const struct mpx_bndcsr *bndcsr;
-
 	RCU_LOCKDEP_WARN(!rcu_is_watching(), "entry code didn't wake RCU");
 	if (notify_die(DIE_TRAP, "bounds", regs, error_code,
 			X86_TRAP_BR, SIGSEGV) == NOTIFY_STOP)
@@ -447,76 +443,6 @@ dotraplinkage void do_bounds(struct pt_regs *regs, long error_code)
 	if (!user_mode(regs))
 		die("bounds", regs, error_code);
 
-	if (!cpu_feature_enabled(X86_FEATURE_MPX)) {
-		/* The exception is not from Intel MPX */
-		goto exit_trap;
-	}
-
-	/*
-	 * We need to look at BNDSTATUS to resolve this exception.
-	 * A NULL here might mean that it is in its 'init state',
-	 * which is all zeros which indicates MPX was not
-	 * responsible for the exception.
-	 */
-	bndcsr = get_xsave_field_ptr(XFEATURE_BNDCSR);
-	if (!bndcsr)
-		goto exit_trap;
-
-	trace_bounds_exception_mpx(bndcsr);
-	/*
-	 * The error code field of the BNDSTATUS register communicates status
-	 * information of a bound range exception #BR or operation involving
-	 * bound directory.
-	 */
-	switch (bndcsr->bndstatus & MPX_BNDSTA_ERROR_CODE) {
-	case 2:	/* Bound directory has invalid entry. */
-		if (mpx_handle_bd_fault())
-			goto exit_trap;
-		break; /* Success, it was handled */
-	case 1: /* Bound violation. */
-	{
-		struct task_struct *tsk = current;
-		struct mpx_fault_info mpx;
-
-		if (mpx_fault_info(&mpx, regs)) {
-			/*
-			 * We failed to decode the MPX instruction.  Act as if
-			 * the exception was not caused by MPX.
-			 */
-			goto exit_trap;
-		}
-		/*
-		 * Success, we decoded the instruction and retrieved
-		 * an 'mpx' containing the address being accessed
-		 * which caused the exception.  This information
-		 * allows and application to possibly handle the
-		 * #BR exception itself.
-		 */
-		if (!do_trap_no_signal(tsk, X86_TRAP_BR, "bounds", regs,
-				       error_code))
-			break;
-
-		show_signal(tsk, SIGSEGV, "trap ", "bounds", regs, error_code);
-
-		force_sig_bnderr(mpx.addr, mpx.lower, mpx.upper);
-		break;
-	}
-	case 0: /* No exception caused by Intel MPX operations. */
-		goto exit_trap;
-	default:
-		die("bounds", regs, error_code);
-	}
-
-	return;
-
-exit_trap:
-	/*
-	 * This path out is for all the cases where we could not
-	 * handle the exception in some way (like allocating a
-	 * table or telling userspace about it.  We will also end
-	 * up here if the kernel has MPX turned off at compile
-	 * time..
-	 */
 	do_trap(X86_TRAP_BR, SIGSEGV, "bounds", regs, error_code, 0, NULL);
 }
 
diff --git a/arch/x86/kvm/cpuid.c b/arch/x86/kvm/cpuid.c
index cf55629ff0ff..b1c469446b07 100644
--- a/arch/x86/kvm/cpuid.c
+++ b/arch/x86/kvm/cpuid.c
@@ -62,7 +62,7 @@ u64 kvm_supported_xcr0(void)
 	return xcr0;
 }
 
-#define F(x) bit(X86_FEATURE_##x)
+#define F feature_bit
 
 int kvm_update_cpuid(struct kvm_vcpu *vcpu)
 {
@@ -281,8 +281,9 @@ out:
 	return r;
 }
 
-static void cpuid_mask(u32 *word, int wordnum)
+static __always_inline void cpuid_mask(u32 *word, int wordnum)
 {
+	reverse_cpuid_check(wordnum);
 	*word &= boot_cpu_data.x86_capability[wordnum];
 }
 
@@ -352,6 +353,7 @@ static inline void do_cpuid_7_mask(struct kvm_cpuid_entry2 *entry, int index)
 	unsigned f_umip = kvm_x86_ops->umip_emulated() ? F(UMIP) : 0;
 	unsigned f_intel_pt = kvm_x86_ops->pt_supported() ? F(INTEL_PT) : 0;
 	unsigned f_la57;
+	unsigned f_pku = kvm_x86_ops->pku_supported() ? F(PKU) : 0;
 
 	/* cpuid 7.0.ebx */
 	const u32 kvm_cpuid_7_0_ebx_x86_features =
@@ -363,7 +365,7 @@ static inline void do_cpuid_7_mask(struct kvm_cpuid_entry2 *entry, int index)
 
 	/* cpuid 7.0.ecx*/
 	const u32 kvm_cpuid_7_0_ecx_x86_features =
-		F(AVX512VBMI) | F(LA57) | F(PKU) | 0 /*OSPKE*/ | F(RDPID) |
+		F(AVX512VBMI) | F(LA57) | 0 /*PKU*/ | 0 /*OSPKE*/ | F(RDPID) |
 		F(AVX512_VPOPCNTDQ) | F(UMIP) | F(AVX512_VBMI2) | F(GFNI) |
 		F(VAES) | F(VPCLMULQDQ) | F(AVX512_VNNI) | F(AVX512_BITALG) |
 		F(CLDEMOTE) | F(MOVDIRI) | F(MOVDIR64B) | 0 /*WAITPKG*/;
@@ -392,6 +394,7 @@ static inline void do_cpuid_7_mask(struct kvm_cpuid_entry2 *entry, int index)
 		/* Set LA57 based on hardware capability. */
 		entry->ecx |= f_la57;
 		entry->ecx |= f_umip;
+		entry->ecx |= f_pku;
 		/* PKU is not yet implemented for shadow paging. */
 		if (!tdp_enabled || !boot_cpu_has(X86_FEATURE_OSPKE))
 			entry->ecx &= ~F(PKU);
diff --git a/arch/x86/kvm/cpuid.h b/arch/x86/kvm/cpuid.h
index d78a61408243..7366c618aa04 100644
--- a/arch/x86/kvm/cpuid.h
+++ b/arch/x86/kvm/cpuid.h
@@ -53,15 +53,46 @@ static const struct cpuid_reg reverse_cpuid[] = {
 	[CPUID_7_ECX]         = {         7, 0, CPUID_ECX},
 	[CPUID_8000_0007_EBX] = {0x80000007, 0, CPUID_EBX},
 	[CPUID_7_EDX]         = {         7, 0, CPUID_EDX},
+	[CPUID_7_1_EAX]       = {         7, 1, CPUID_EAX},
 };
 
-static __always_inline struct cpuid_reg x86_feature_cpuid(unsigned x86_feature)
+/*
+ * Reverse CPUID and its derivatives can only be used for hardware-defined
+ * feature words, i.e. words whose bits directly correspond to a CPUID leaf.
+ * Retrieving a feature bit or masking guest CPUID from a Linux-defined word
+ * is nonsensical as the bit number/mask is an arbitrary software-defined value
+ * and can't be used by KVM to query/control guest capabilities.  And obviously
+ * the leaf being queried must have an entry in the lookup table.
+ */
+static __always_inline void reverse_cpuid_check(unsigned x86_leaf)
 {
-	unsigned x86_leaf = x86_feature / 32;
-
+	BUILD_BUG_ON(x86_leaf == CPUID_LNX_1);
+	BUILD_BUG_ON(x86_leaf == CPUID_LNX_2);
+	BUILD_BUG_ON(x86_leaf == CPUID_LNX_3);
+	BUILD_BUG_ON(x86_leaf == CPUID_LNX_4);
 	BUILD_BUG_ON(x86_leaf >= ARRAY_SIZE(reverse_cpuid));
 	BUILD_BUG_ON(reverse_cpuid[x86_leaf].function == 0);
+}
+
+/*
+ * Retrieve the bit mask from an X86_FEATURE_* definition.  Features contain
+ * the hardware defined bit number (stored in bits 4:0) and a software defined
+ * "word" (stored in bits 31:5).  The word is used to index into arrays of
+ * bit masks that hold the per-cpu feature capabilities, e.g. this_cpu_has().
+ */
+static __always_inline u32 __feature_bit(int x86_feature)
+{
+	reverse_cpuid_check(x86_feature / 32);
+	return 1 << (x86_feature & 31);
+}
 
+#define feature_bit(name)  __feature_bit(X86_FEATURE_##name)
+
+static __always_inline struct cpuid_reg x86_feature_cpuid(unsigned x86_feature)
+{
+	unsigned x86_leaf = x86_feature / 32;
+
+	reverse_cpuid_check(x86_leaf);
 	return reverse_cpuid[x86_leaf];
 }
 
@@ -93,15 +124,11 @@ static __always_inline bool guest_cpuid_has(struct kvm_vcpu *vcpu, unsigned x86_
 {
 	int *reg;
 
-	if (x86_feature == X86_FEATURE_XSAVE &&
-			!static_cpu_has(X86_FEATURE_XSAVE))
-		return false;
-
 	reg = guest_cpuid_get_register(vcpu, x86_feature);
 	if (!reg)
 		return false;
 
-	return *reg & bit(x86_feature);
+	return *reg & __feature_bit(x86_feature);
 }
 
 static __always_inline void guest_cpuid_clear(struct kvm_vcpu *vcpu, unsigned x86_feature)
@@ -110,7 +137,7 @@ static __always_inline void guest_cpuid_clear(struct kvm_vcpu *vcpu, unsigned x8
 
 	reg = guest_cpuid_get_register(vcpu, x86_feature);
 	if (reg)
-		*reg &= ~bit(x86_feature);
+		*reg &= ~__feature_bit(x86_feature);
 }
 
 static inline bool guest_cpuid_is_amd(struct kvm_vcpu *vcpu)
diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c
index 952d1a4f4d7e..ddbc61984227 100644
--- a/arch/x86/kvm/emulate.c
+++ b/arch/x86/kvm/emulate.c
@@ -22,6 +22,7 @@
 #include "kvm_cache_regs.h"
 #include <asm/kvm_emulate.h>
 #include <linux/stringify.h>
+#include <asm/fpu/api.h>
 #include <asm/debugreg.h>
 #include <asm/nospec-branch.h>
 
@@ -310,7 +311,9 @@ static void invalidate_registers(struct x86_emulate_ctxt *ctxt)
 #define ON64(x)
 #endif
 
-static int fastop(struct x86_emulate_ctxt *ctxt, void (*fop)(struct fastop *));
+typedef void (*fastop_t)(struct fastop *);
+
+static int fastop(struct x86_emulate_ctxt *ctxt, fastop_t fop);
 
 #define __FOP_FUNC(name) \
 	".align " __stringify(FASTOP_SIZE) " \n\t" \
@@ -1075,8 +1078,23 @@ static void fetch_register_operand(struct operand *op)
 	}
 }
 
-static void read_sse_reg(struct x86_emulate_ctxt *ctxt, sse128_t *data, int reg)
+static void emulator_get_fpu(void)
+{
+	fpregs_lock();
+
+	fpregs_assert_state_consistent();
+	if (test_thread_flag(TIF_NEED_FPU_LOAD))
+		switch_fpu_return();
+}
+
+static void emulator_put_fpu(void)
 {
+	fpregs_unlock();
+}
+
+static void read_sse_reg(sse128_t *data, int reg)
+{
+	emulator_get_fpu();
 	switch (reg) {
 	case 0: asm("movdqa %%xmm0, %0" : "=m"(*data)); break;
 	case 1: asm("movdqa %%xmm1, %0" : "=m"(*data)); break;
@@ -1098,11 +1116,12 @@ static void read_sse_reg(struct x86_emulate_ctxt *ctxt, sse128_t *data, int reg)
 #endif
 	default: BUG();
 	}
+	emulator_put_fpu();
 }
 
-static void write_sse_reg(struct x86_emulate_ctxt *ctxt, sse128_t *data,
-			  int reg)
+static void write_sse_reg(sse128_t *data, int reg)
 {
+	emulator_get_fpu();
 	switch (reg) {
 	case 0: asm("movdqa %0, %%xmm0" : : "m"(*data)); break;
 	case 1: asm("movdqa %0, %%xmm1" : : "m"(*data)); break;
@@ -1124,10 +1143,12 @@ static void write_sse_reg(struct x86_emulate_ctxt *ctxt, sse128_t *data,
 #endif
 	default: BUG();
 	}
+	emulator_put_fpu();
 }
 
-static void read_mmx_reg(struct x86_emulate_ctxt *ctxt, u64 *data, int reg)
+static void read_mmx_reg(u64 *data, int reg)
 {
+	emulator_get_fpu();
 	switch (reg) {
 	case 0: asm("movq %%mm0, %0" : "=m"(*data)); break;
 	case 1: asm("movq %%mm1, %0" : "=m"(*data)); break;
@@ -1139,10 +1160,12 @@ static void read_mmx_reg(struct x86_emulate_ctxt *ctxt, u64 *data, int reg)
 	case 7: asm("movq %%mm7, %0" : "=m"(*data)); break;
 	default: BUG();
 	}
+	emulator_put_fpu();
 }
 
-static void write_mmx_reg(struct x86_emulate_ctxt *ctxt, u64 *data, int reg)
+static void write_mmx_reg(u64 *data, int reg)
 {
+	emulator_get_fpu();
 	switch (reg) {
 	case 0: asm("movq %0, %%mm0" : : "m"(*data)); break;
 	case 1: asm("movq %0, %%mm1" : : "m"(*data)); break;
@@ -1154,6 +1177,7 @@ static void write_mmx_reg(struct x86_emulate_ctxt *ctxt, u64 *data, int reg)
 	case 7: asm("movq %0, %%mm7" : : "m"(*data)); break;
 	default: BUG();
 	}
+	emulator_put_fpu();
 }
 
 static int em_fninit(struct x86_emulate_ctxt *ctxt)
@@ -1161,7 +1185,9 @@ static int em_fninit(struct x86_emulate_ctxt *ctxt)
 	if (ctxt->ops->get_cr(ctxt, 0) & (X86_CR0_TS | X86_CR0_EM))
 		return emulate_nm(ctxt);
 
+	emulator_get_fpu();
 	asm volatile("fninit");
+	emulator_put_fpu();
 	return X86EMUL_CONTINUE;
 }
 
@@ -1172,7 +1198,9 @@ static int em_fnstcw(struct x86_emulate_ctxt *ctxt)
 	if (ctxt->ops->get_cr(ctxt, 0) & (X86_CR0_TS | X86_CR0_EM))
 		return emulate_nm(ctxt);
 
+	emulator_get_fpu();
 	asm volatile("fnstcw %0": "+m"(fcw));
+	emulator_put_fpu();
 
 	ctxt->dst.val = fcw;
 
@@ -1186,7 +1214,9 @@ static int em_fnstsw(struct x86_emulate_ctxt *ctxt)
 	if (ctxt->ops->get_cr(ctxt, 0) & (X86_CR0_TS | X86_CR0_EM))
 		return emulate_nm(ctxt);
 
+	emulator_get_fpu();
 	asm volatile("fnstsw %0": "+m"(fsw));
+	emulator_put_fpu();
 
 	ctxt->dst.val = fsw;
 
@@ -1205,7 +1235,7 @@ static void decode_register_operand(struct x86_emulate_ctxt *ctxt,
 		op->type = OP_XMM;
 		op->bytes = 16;
 		op->addr.xmm = reg;
-		read_sse_reg(ctxt, &op->vec_val, reg);
+		read_sse_reg(&op->vec_val, reg);
 		return;
 	}
 	if (ctxt->d & Mmx) {
@@ -1256,7 +1286,7 @@ static int decode_modrm(struct x86_emulate_ctxt *ctxt,
 			op->type = OP_XMM;
 			op->bytes = 16;
 			op->addr.xmm = ctxt->modrm_rm;
-			read_sse_reg(ctxt, &op->vec_val, ctxt->modrm_rm);
+			read_sse_reg(&op->vec_val, ctxt->modrm_rm);
 			return rc;
 		}
 		if (ctxt->d & Mmx) {
@@ -1833,10 +1863,10 @@ static int writeback(struct x86_emulate_ctxt *ctxt, struct operand *op)
 				       op->bytes * op->count);
 		break;
 	case OP_XMM:
-		write_sse_reg(ctxt, &op->vec_val, op->addr.xmm);
+		write_sse_reg(&op->vec_val, op->addr.xmm);
 		break;
 	case OP_MM:
-		write_mmx_reg(ctxt, &op->mm_val, op->addr.mm);
+		write_mmx_reg(&op->mm_val, op->addr.mm);
 		break;
 	case OP_NONE:
 		/* no writeback */
@@ -2348,12 +2378,7 @@ static int em_lseg(struct x86_emulate_ctxt *ctxt)
 static int emulator_has_longmode(struct x86_emulate_ctxt *ctxt)
 {
 #ifdef CONFIG_X86_64
-	u32 eax, ebx, ecx, edx;
-
-	eax = 0x80000001;
-	ecx = 0;
-	ctxt->ops->get_cpuid(ctxt, &eax, &ebx, &ecx, &edx, false);
-	return edx & bit(X86_FEATURE_LM);
+	return ctxt->ops->guest_has_long_mode(ctxt);
 #else
 	return false;
 #endif
@@ -3618,18 +3643,11 @@ static int em_mov(struct x86_emulate_ctxt *ctxt)
 	return X86EMUL_CONTINUE;
 }
 
-#define FFL(x) bit(X86_FEATURE_##x)
-
 static int em_movbe(struct x86_emulate_ctxt *ctxt)
 {
-	u32 ebx, ecx, edx, eax = 1;
 	u16 tmp;
 
-	/*
-	 * Check MOVBE is set in the guest-visible CPUID leaf.
-	 */
-	ctxt->ops->get_cpuid(ctxt, &eax, &ebx, &ecx, &edx, false);
-	if (!(ecx & FFL(MOVBE)))
+	if (!ctxt->ops->guest_has_movbe(ctxt))
 		return emulate_ud(ctxt);
 
 	switch (ctxt->op_bytes) {
@@ -4027,10 +4045,7 @@ static int em_movsxd(struct x86_emulate_ctxt *ctxt)
 
 static int check_fxsr(struct x86_emulate_ctxt *ctxt)
 {
-	u32 eax = 1, ebx, ecx = 0, edx;
-
-	ctxt->ops->get_cpuid(ctxt, &eax, &ebx, &ecx, &edx, false);
-	if (!(edx & FFL(FXSR)))
+	if (!ctxt->ops->guest_has_fxsr(ctxt))
 		return emulate_ud(ctxt);
 
 	if (ctxt->ops->get_cr(ctxt, 0) & (X86_CR0_TS | X86_CR0_EM))
@@ -4092,8 +4107,12 @@ static int em_fxsave(struct x86_emulate_ctxt *ctxt)
 	if (rc != X86EMUL_CONTINUE)
 		return rc;
 
+	emulator_get_fpu();
+
 	rc = asm_safe("fxsave %[fx]", , [fx] "+m"(fx_state));
 
+	emulator_put_fpu();
+
 	if (rc != X86EMUL_CONTINUE)
 		return rc;
 
@@ -4136,6 +4155,8 @@ static int em_fxrstor(struct x86_emulate_ctxt *ctxt)
 	if (rc != X86EMUL_CONTINUE)
 		return rc;
 
+	emulator_get_fpu();
+
 	if (size < __fxstate_size(16)) {
 		rc = fxregs_fixup(&fx_state, size);
 		if (rc != X86EMUL_CONTINUE)
@@ -4151,6 +4172,8 @@ static int em_fxrstor(struct x86_emulate_ctxt *ctxt)
 		rc = asm_safe("fxrstor %[fx]", : [fx] "m"(fx_state));
 
 out:
+	emulator_put_fpu();
+
 	return rc;
 }
 
@@ -5210,16 +5233,28 @@ int x86_decode_insn(struct x86_emulate_ctxt *ctxt, void *insn, int insn_len)
 				ctxt->ad_bytes = def_ad_bytes ^ 6;
 			break;
 		case 0x26:	/* ES override */
+			has_seg_override = true;
+			ctxt->seg_override = VCPU_SREG_ES;
+			break;
 		case 0x2e:	/* CS override */
+			has_seg_override = true;
+			ctxt->seg_override = VCPU_SREG_CS;
+			break;
 		case 0x36:	/* SS override */
+			has_seg_override = true;
+			ctxt->seg_override = VCPU_SREG_SS;
+			break;
 		case 0x3e:	/* DS override */
 			has_seg_override = true;
-			ctxt->seg_override = (ctxt->b >> 3) & 3;
+			ctxt->seg_override = VCPU_SREG_DS;
 			break;
 		case 0x64:	/* FS override */
+			has_seg_override = true;
+			ctxt->seg_override = VCPU_SREG_FS;
+			break;
 		case 0x65:	/* GS override */
 			has_seg_override = true;
-			ctxt->seg_override = ctxt->b & 7;
+			ctxt->seg_override = VCPU_SREG_GS;
 			break;
 		case 0x40 ... 0x4f: /* REX */
 			if (mode != X86EMUL_MODE_PROT64)
@@ -5303,10 +5338,15 @@ done_prefixes:
 			}
 			break;
 		case Escape:
-			if (ctxt->modrm > 0xbf)
-				opcode = opcode.u.esc->high[ctxt->modrm - 0xc0];
-			else
+			if (ctxt->modrm > 0xbf) {
+				size_t size = ARRAY_SIZE(opcode.u.esc->high);
+				u32 index = array_index_nospec(
+					ctxt->modrm - 0xc0, size);
+
+				opcode = opcode.u.esc->high[index];
+			} else {
 				opcode = opcode.u.esc->op[(ctxt->modrm >> 3) & 7];
+			}
 			break;
 		case InstrDual:
 			if ((ctxt->modrm >> 6) == 3)
@@ -5448,7 +5488,9 @@ static int flush_pending_x87_faults(struct x86_emulate_ctxt *ctxt)
 {
 	int rc;
 
+	emulator_get_fpu();
 	rc = asm_safe("fwait");
+	emulator_put_fpu();
 
 	if (unlikely(rc != X86EMUL_CONTINUE))
 		return emulate_exception(ctxt, MF_VECTOR, 0, false);
@@ -5456,14 +5498,13 @@ static int flush_pending_x87_faults(struct x86_emulate_ctxt *ctxt)
 	return X86EMUL_CONTINUE;
 }
 
-static void fetch_possible_mmx_operand(struct x86_emulate_ctxt *ctxt,
-				       struct operand *op)
+static void fetch_possible_mmx_operand(struct operand *op)
 {
 	if (op->type == OP_MM)
-		read_mmx_reg(ctxt, &op->mm_val, op->addr.mm);
+		read_mmx_reg(&op->mm_val, op->addr.mm);
 }
 
-static int fastop(struct x86_emulate_ctxt *ctxt, void (*fop)(struct fastop *))
+static int fastop(struct x86_emulate_ctxt *ctxt, fastop_t fop)
 {
 	ulong flags = (ctxt->eflags & EFLAGS_MASK) | X86_EFLAGS_IF;
 
@@ -5539,10 +5580,10 @@ int x86_emulate_insn(struct x86_emulate_ctxt *ctxt)
 			 * Now that we know the fpu is exception safe, we can fetch
 			 * operands from it.
 			 */
-			fetch_possible_mmx_operand(ctxt, &ctxt->src);
-			fetch_possible_mmx_operand(ctxt, &ctxt->src2);
+			fetch_possible_mmx_operand(&ctxt->src);
+			fetch_possible_mmx_operand(&ctxt->src2);
 			if (!(ctxt->d & Mov))
-				fetch_possible_mmx_operand(ctxt, &ctxt->dst);
+				fetch_possible_mmx_operand(&ctxt->dst);
 		}
 
 		if (unlikely(emul_flags & X86EMUL_GUEST_MASK) && ctxt->intercept) {
@@ -5641,14 +5682,10 @@ special_insn:
 		ctxt->eflags &= ~X86_EFLAGS_RF;
 
 	if (ctxt->execute) {
-		if (ctxt->d & Fastop) {
-			void (*fop)(struct fastop *) = (void *)ctxt->execute;
-			rc = fastop(ctxt, fop);
-			if (rc != X86EMUL_CONTINUE)
-				goto done;
-			goto writeback;
-		}
-		rc = ctxt->execute(ctxt);
+		if (ctxt->d & Fastop)
+			rc = fastop(ctxt, (fastop_t)ctxt->execute);
+		else
+			rc = ctxt->execute(ctxt);
 		if (rc != X86EMUL_CONTINUE)
 			goto done;
 		goto writeback;
diff --git a/arch/x86/kvm/hyperv.c b/arch/x86/kvm/hyperv.c
index 23ff65504d7e..a86fda7a1d03 100644
--- a/arch/x86/kvm/hyperv.c
+++ b/arch/x86/kvm/hyperv.c
@@ -33,6 +33,7 @@
 #include <trace/events/kvm.h>
 
 #include "trace.h"
+#include "irq.h"
 
 #define KVM_HV_MAX_SPARSE_VCPU_SET_BITS DIV_ROUND_UP(KVM_MAX_VCPUS, 64)
 
@@ -775,9 +776,10 @@ int kvm_hv_activate_synic(struct kvm_vcpu *vcpu, bool dont_zero_synic_pages)
 
 	/*
 	 * Hyper-V SynIC auto EOI SINT's are
-	 * not compatible with APICV, so deactivate APICV
+	 * not compatible with APICV, so request
+	 * to deactivate APICV permanently.
 	 */
-	kvm_vcpu_deactivate_apicv(vcpu);
+	kvm_request_apicv_update(vcpu->kvm, false, APICV_INHIBIT_REASON_HYPERV);
 	synic->active = true;
 	synic->dont_zero_synic_pages = dont_zero_synic_pages;
 	return 0;
@@ -809,11 +811,12 @@ static int kvm_hv_msr_get_crash_data(struct kvm_vcpu *vcpu,
 				     u32 index, u64 *pdata)
 {
 	struct kvm_hv *hv = &vcpu->kvm->arch.hyperv;
+	size_t size = ARRAY_SIZE(hv->hv_crash_param);
 
-	if (WARN_ON_ONCE(index >= ARRAY_SIZE(hv->hv_crash_param)))
+	if (WARN_ON_ONCE(index >= size))
 		return -EINVAL;
 
-	*pdata = hv->hv_crash_param[index];
+	*pdata = hv->hv_crash_param[array_index_nospec(index, size)];
 	return 0;
 }
 
@@ -852,11 +855,12 @@ static int kvm_hv_msr_set_crash_data(struct kvm_vcpu *vcpu,
 				     u32 index, u64 data)
 {
 	struct kvm_hv *hv = &vcpu->kvm->arch.hyperv;
+	size_t size = ARRAY_SIZE(hv->hv_crash_param);
 
-	if (WARN_ON_ONCE(index >= ARRAY_SIZE(hv->hv_crash_param)))
+	if (WARN_ON_ONCE(index >= size))
 		return -EINVAL;
 
-	hv->hv_crash_param[index] = data;
+	hv->hv_crash_param[array_index_nospec(index, size)] = data;
 	return 0;
 }
 
@@ -1058,7 +1062,7 @@ static int kvm_hv_set_msr_pw(struct kvm_vcpu *vcpu, u32 msr, u64 data,
 			return 1;
 		break;
 	default:
-		vcpu_unimpl(vcpu, "Hyper-V uhandled wrmsr: 0x%x data 0x%llx\n",
+		vcpu_unimpl(vcpu, "Hyper-V unhandled wrmsr: 0x%x data 0x%llx\n",
 			    msr, data);
 		return 1;
 	}
@@ -1121,7 +1125,7 @@ static int kvm_hv_set_msr(struct kvm_vcpu *vcpu, u32 msr, u64 data, bool host)
 			return 1;
 
 		/*
-		 * Clear apic_assist portion of f(struct hv_vp_assist_page
+		 * Clear apic_assist portion of struct hv_vp_assist_page
 		 * only, there can be valuable data in the rest which needs
 		 * to be preserved e.g. on migration.
 		 */
@@ -1178,7 +1182,7 @@ static int kvm_hv_set_msr(struct kvm_vcpu *vcpu, u32 msr, u64 data, bool host)
 			return 1;
 		break;
 	default:
-		vcpu_unimpl(vcpu, "Hyper-V uhandled wrmsr: 0x%x data 0x%llx\n",
+		vcpu_unimpl(vcpu, "Hyper-V unhandled wrmsr: 0x%x data 0x%llx\n",
 			    msr, data);
 		return 1;
 	}
diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c
index 4a6dc54cc12b..b24c606ac04b 100644
--- a/arch/x86/kvm/i8254.c
+++ b/arch/x86/kvm/i8254.c
@@ -295,12 +295,24 @@ void kvm_pit_set_reinject(struct kvm_pit *pit, bool reinject)
 	if (atomic_read(&ps->reinject) == reinject)
 		return;
 
+	/*
+	 * AMD SVM AVIC accelerates EOI write and does not trap.
+	 * This cause in-kernel PIT re-inject mode to fail
+	 * since it checks ps->irq_ack before kvm_set_irq()
+	 * and relies on the ack notifier to timely queue
+	 * the pt->worker work iterm and reinject the missed tick.
+	 * So, deactivate APICv when PIT is in reinject mode.
+	 */
 	if (reinject) {
+		kvm_request_apicv_update(kvm, false,
+					 APICV_INHIBIT_REASON_PIT_REINJ);
 		/* The initial state is preserved while ps->reinject == 0. */
 		kvm_pit_reset_reinject(pit);
 		kvm_register_irq_ack_notifier(kvm, &ps->irq_ack_notifier);
 		kvm_register_irq_mask_notifier(kvm, 0, &pit->mask_notifier);
 	} else {
+		kvm_request_apicv_update(kvm, true,
+					 APICV_INHIBIT_REASON_PIT_REINJ);
 		kvm_unregister_irq_ack_notifier(kvm, &ps->irq_ack_notifier);
 		kvm_unregister_irq_mask_notifier(kvm, 0, &pit->mask_notifier);
 	}
diff --git a/arch/x86/kvm/i8259.c b/arch/x86/kvm/i8259.c
index 8b38bb4868a6..629a09ca9860 100644
--- a/arch/x86/kvm/i8259.c
+++ b/arch/x86/kvm/i8259.c
@@ -460,10 +460,14 @@ static int picdev_write(struct kvm_pic *s,
 	switch (addr) {
 	case 0x20:
 	case 0x21:
+		pic_lock(s);
+		pic_ioport_write(&s->pics[0], addr, data);
+		pic_unlock(s);
+		break;
 	case 0xa0:
 	case 0xa1:
 		pic_lock(s);
-		pic_ioport_write(&s->pics[addr >> 7], addr, data);
+		pic_ioport_write(&s->pics[1], addr, data);
 		pic_unlock(s);
 		break;
 	case 0x4d0:
diff --git a/arch/x86/kvm/ioapic.c b/arch/x86/kvm/ioapic.c
index 9fd2dd89a1c5..7668fed1ce65 100644
--- a/arch/x86/kvm/ioapic.c
+++ b/arch/x86/kvm/ioapic.c
@@ -36,6 +36,7 @@
 #include <linux/io.h>
 #include <linux/slab.h>
 #include <linux/export.h>
+#include <linux/nospec.h>
 #include <asm/processor.h>
 #include <asm/page.h>
 #include <asm/current.h>
@@ -48,6 +49,11 @@
 static int ioapic_service(struct kvm_ioapic *vioapic, int irq,
 		bool line_status);
 
+static void kvm_ioapic_update_eoi_one(struct kvm_vcpu *vcpu,
+				      struct kvm_ioapic *ioapic,
+				      int trigger_mode,
+				      int pin);
+
 static unsigned long ioapic_read_indirect(struct kvm_ioapic *ioapic,
 					  unsigned long addr,
 					  unsigned long length)
@@ -68,13 +74,14 @@ static unsigned long ioapic_read_indirect(struct kvm_ioapic *ioapic,
 	default:
 		{
 			u32 redir_index = (ioapic->ioregsel - 0x10) >> 1;
-			u64 redir_content;
+			u64 redir_content = ~0ULL;
+
+			if (redir_index < IOAPIC_NUM_PINS) {
+				u32 index = array_index_nospec(
+					redir_index, IOAPIC_NUM_PINS);
 
-			if (redir_index < IOAPIC_NUM_PINS)
-				redir_content =
-					ioapic->redirtbl[redir_index].bits;
-			else
-				redir_content = ~0ULL;
+				redir_content = ioapic->redirtbl[index].bits;
+			}
 
 			result = (ioapic->ioregsel & 0x1) ?
 			    (redir_content >> 32) & 0xffffffff :
@@ -108,8 +115,9 @@ static void __rtc_irq_eoi_tracking_restore_one(struct kvm_vcpu *vcpu)
 	union kvm_ioapic_redirect_entry *e;
 
 	e = &ioapic->redirtbl[RTC_GSI];
-	if (!kvm_apic_match_dest(vcpu, NULL, 0,	e->fields.dest_id,
-				e->fields.dest_mode))
+	if (!kvm_apic_match_dest(vcpu, NULL, APIC_DEST_NOSHORT,
+				 e->fields.dest_id,
+				 kvm_lapic_irq_dest_mode(!!e->fields.dest_mode)))
 		return;
 
 	new_val = kvm_apic_pending_eoi(vcpu, e->fields.vector);
@@ -151,10 +159,16 @@ static void kvm_rtc_eoi_tracking_restore_all(struct kvm_ioapic *ioapic)
 	    __rtc_irq_eoi_tracking_restore_one(vcpu);
 }
 
-static void rtc_irq_eoi(struct kvm_ioapic *ioapic, struct kvm_vcpu *vcpu)
+static void rtc_irq_eoi(struct kvm_ioapic *ioapic, struct kvm_vcpu *vcpu,
+			int vector)
 {
-	if (test_and_clear_bit(vcpu->vcpu_id,
-			       ioapic->rtc_status.dest_map.map)) {
+	struct dest_map *dest_map = &ioapic->rtc_status.dest_map;
+
+	/* RTC special handling */
+	if (test_bit(vcpu->vcpu_id, dest_map->map) &&
+	    (vector == dest_map->vectors[vcpu->vcpu_id]) &&
+	    (test_and_clear_bit(vcpu->vcpu_id,
+				ioapic->rtc_status.dest_map.map))) {
 		--ioapic->rtc_status.pending_eoi;
 		rtc_status_pending_eoi_check_valid(ioapic);
 	}
@@ -168,6 +182,31 @@ static bool rtc_irq_check_coalesced(struct kvm_ioapic *ioapic)
 	return false;
 }
 
+static void ioapic_lazy_update_eoi(struct kvm_ioapic *ioapic, int irq)
+{
+	int i;
+	struct kvm_vcpu *vcpu;
+	union kvm_ioapic_redirect_entry *entry = &ioapic->redirtbl[irq];
+
+	kvm_for_each_vcpu(i, vcpu, ioapic->kvm) {
+		if (!kvm_apic_match_dest(vcpu, NULL, APIC_DEST_NOSHORT,
+					 entry->fields.dest_id,
+					 entry->fields.dest_mode) ||
+		    kvm_apic_pending_eoi(vcpu, entry->fields.vector))
+			continue;
+
+		/*
+		 * If no longer has pending EOI in LAPICs, update
+		 * EOI for this vetor.
+		 */
+		rtc_irq_eoi(ioapic, vcpu, entry->fields.vector);
+		kvm_ioapic_update_eoi_one(vcpu, ioapic,
+					  entry->fields.trig_mode,
+					  irq);
+		break;
+	}
+}
+
 static int ioapic_set_irq(struct kvm_ioapic *ioapic, unsigned int irq,
 		int irq_level, bool line_status)
 {
@@ -186,9 +225,18 @@ static int ioapic_set_irq(struct kvm_ioapic *ioapic, unsigned int irq,
 	}
 
 	/*
+	 * AMD SVM AVIC accelerate EOI write and do not trap,
+	 * in-kernel IOAPIC will not be able to receive the EOI.
+	 * In this case, we do lazy update of the pending EOI when
+	 * trying to set IOAPIC irq.
+	 */
+	if (kvm_apicv_activated(ioapic->kvm))
+		ioapic_lazy_update_eoi(ioapic, irq);
+
+	/*
 	 * Return 0 for coalesced interrupts; for edge-triggered interrupts,
 	 * this only happens if a previous edge has not been delivered due
-	 * do masking.  For level interrupts, the remote_irr field tells
+	 * to masking.  For level interrupts, the remote_irr field tells
 	 * us if the interrupt is waiting for an EOI.
 	 *
 	 * RTC is special: it is edge-triggered, but userspace likes to know
@@ -250,8 +298,10 @@ void kvm_ioapic_scan_entry(struct kvm_vcpu *vcpu, ulong *ioapic_handled_vectors)
 		if (e->fields.trig_mode == IOAPIC_LEVEL_TRIG ||
 		    kvm_irq_has_notifier(ioapic->kvm, KVM_IRQCHIP_IOAPIC, index) ||
 		    index == RTC_GSI) {
-			if (kvm_apic_match_dest(vcpu, NULL, 0,
-			             e->fields.dest_id, e->fields.dest_mode) ||
+			u16 dm = kvm_lapic_irq_dest_mode(!!e->fields.dest_mode);
+
+			if (kvm_apic_match_dest(vcpu, NULL, APIC_DEST_NOSHORT,
+						e->fields.dest_id, dm) ||
 			    kvm_apic_pending_eoi(vcpu, e->fields.vector))
 				__set_bit(e->fields.vector,
 					  ioapic_handled_vectors);
@@ -292,6 +342,7 @@ static void ioapic_write_indirect(struct kvm_ioapic *ioapic, u32 val)
 
 		if (index >= IOAPIC_NUM_PINS)
 			return;
+		index = array_index_nospec(index, IOAPIC_NUM_PINS);
 		e = &ioapic->redirtbl[index];
 		mask_before = e->fields.mask;
 		/* Preserve read-only fields */
@@ -327,11 +378,12 @@ static void ioapic_write_indirect(struct kvm_ioapic *ioapic, u32 val)
 		if (e->fields.delivery_mode == APIC_DM_FIXED) {
 			struct kvm_lapic_irq irq;
 
-			irq.shorthand = 0;
+			irq.shorthand = APIC_DEST_NOSHORT;
 			irq.vector = e->fields.vector;
 			irq.delivery_mode = e->fields.delivery_mode << 8;
 			irq.dest_id = e->fields.dest_id;
-			irq.dest_mode = e->fields.dest_mode;
+			irq.dest_mode =
+			    kvm_lapic_irq_dest_mode(!!e->fields.dest_mode);
 			bitmap_zero(&vcpu_bitmap, 16);
 			kvm_bitmap_or_dest_vcpus(ioapic->kvm, &irq,
 						 &vcpu_bitmap);
@@ -343,7 +395,9 @@ static void ioapic_write_indirect(struct kvm_ioapic *ioapic, u32 val)
 				 * keep ioapic_handled_vectors synchronized.
 				 */
 				irq.dest_id = old_dest_id;
-				irq.dest_mode = old_dest_mode;
+				irq.dest_mode =
+				    kvm_lapic_irq_dest_mode(
+					!!e->fields.dest_mode);
 				kvm_bitmap_or_dest_vcpus(ioapic->kvm, &irq,
 							 &vcpu_bitmap);
 			}
@@ -369,11 +423,11 @@ static int ioapic_service(struct kvm_ioapic *ioapic, int irq, bool line_status)
 
 	irqe.dest_id = entry->fields.dest_id;
 	irqe.vector = entry->fields.vector;
-	irqe.dest_mode = entry->fields.dest_mode;
+	irqe.dest_mode = kvm_lapic_irq_dest_mode(!!entry->fields.dest_mode);
 	irqe.trig_mode = entry->fields.trig_mode;
 	irqe.delivery_mode = entry->fields.delivery_mode << 8;
 	irqe.level = 1;
-	irqe.shorthand = 0;
+	irqe.shorthand = APIC_DEST_NOSHORT;
 	irqe.msi_redir_hint = false;
 
 	if (irqe.trig_mode == IOAPIC_EDGE_TRIG)
@@ -445,72 +499,68 @@ static void kvm_ioapic_eoi_inject_work(struct work_struct *work)
 }
 
 #define IOAPIC_SUCCESSIVE_IRQ_MAX_COUNT 10000
-
-static void __kvm_ioapic_update_eoi(struct kvm_vcpu *vcpu,
-			struct kvm_ioapic *ioapic, int vector, int trigger_mode)
+static void kvm_ioapic_update_eoi_one(struct kvm_vcpu *vcpu,
+				      struct kvm_ioapic *ioapic,
+				      int trigger_mode,
+				      int pin)
 {
-	struct dest_map *dest_map = &ioapic->rtc_status.dest_map;
 	struct kvm_lapic *apic = vcpu->arch.apic;
-	int i;
+	union kvm_ioapic_redirect_entry *ent = &ioapic->redirtbl[pin];
 
-	/* RTC special handling */
-	if (test_bit(vcpu->vcpu_id, dest_map->map) &&
-	    vector == dest_map->vectors[vcpu->vcpu_id])
-		rtc_irq_eoi(ioapic, vcpu);
-
-	for (i = 0; i < IOAPIC_NUM_PINS; i++) {
-		union kvm_ioapic_redirect_entry *ent = &ioapic->redirtbl[i];
-
-		if (ent->fields.vector != vector)
-			continue;
-
-		/*
-		 * We are dropping lock while calling ack notifiers because ack
-		 * notifier callbacks for assigned devices call into IOAPIC
-		 * recursively. Since remote_irr is cleared only after call
-		 * to notifiers if the same vector will be delivered while lock
-		 * is dropped it will be put into irr and will be delivered
-		 * after ack notifier returns.
-		 */
-		spin_unlock(&ioapic->lock);
-		kvm_notify_acked_irq(ioapic->kvm, KVM_IRQCHIP_IOAPIC, i);
-		spin_lock(&ioapic->lock);
+	/*
+	 * We are dropping lock while calling ack notifiers because ack
+	 * notifier callbacks for assigned devices call into IOAPIC
+	 * recursively. Since remote_irr is cleared only after call
+	 * to notifiers if the same vector will be delivered while lock
+	 * is dropped it will be put into irr and will be delivered
+	 * after ack notifier returns.
+	 */
+	spin_unlock(&ioapic->lock);
+	kvm_notify_acked_irq(ioapic->kvm, KVM_IRQCHIP_IOAPIC, pin);
+	spin_lock(&ioapic->lock);
 
-		if (trigger_mode != IOAPIC_LEVEL_TRIG ||
-		    kvm_lapic_get_reg(apic, APIC_SPIV) & APIC_SPIV_DIRECTED_EOI)
-			continue;
+	if (trigger_mode != IOAPIC_LEVEL_TRIG ||
+	    kvm_lapic_get_reg(apic, APIC_SPIV) & APIC_SPIV_DIRECTED_EOI)
+		return;
 
-		ASSERT(ent->fields.trig_mode == IOAPIC_LEVEL_TRIG);
-		ent->fields.remote_irr = 0;
-		if (!ent->fields.mask && (ioapic->irr & (1 << i))) {
-			++ioapic->irq_eoi[i];
-			if (ioapic->irq_eoi[i] == IOAPIC_SUCCESSIVE_IRQ_MAX_COUNT) {
-				/*
-				 * Real hardware does not deliver the interrupt
-				 * immediately during eoi broadcast, and this
-				 * lets a buggy guest make slow progress
-				 * even if it does not correctly handle a
-				 * level-triggered interrupt.  Emulate this
-				 * behavior if we detect an interrupt storm.
-				 */
-				schedule_delayed_work(&ioapic->eoi_inject, HZ / 100);
-				ioapic->irq_eoi[i] = 0;
-				trace_kvm_ioapic_delayed_eoi_inj(ent->bits);
-			} else {
-				ioapic_service(ioapic, i, false);
-			}
+	ASSERT(ent->fields.trig_mode == IOAPIC_LEVEL_TRIG);
+	ent->fields.remote_irr = 0;
+	if (!ent->fields.mask && (ioapic->irr & (1 << pin))) {
+		++ioapic->irq_eoi[pin];
+		if (ioapic->irq_eoi[pin] == IOAPIC_SUCCESSIVE_IRQ_MAX_COUNT) {
+			/*
+			 * Real hardware does not deliver the interrupt
+			 * immediately during eoi broadcast, and this
+			 * lets a buggy guest make slow progress
+			 * even if it does not correctly handle a
+			 * level-triggered interrupt.  Emulate this
+			 * behavior if we detect an interrupt storm.
+			 */
+			schedule_delayed_work(&ioapic->eoi_inject, HZ / 100);
+			ioapic->irq_eoi[pin] = 0;
+			trace_kvm_ioapic_delayed_eoi_inj(ent->bits);
 		} else {
-			ioapic->irq_eoi[i] = 0;
+			ioapic_service(ioapic, pin, false);
 		}
+	} else {
+		ioapic->irq_eoi[pin] = 0;
 	}
 }
 
 void kvm_ioapic_update_eoi(struct kvm_vcpu *vcpu, int vector, int trigger_mode)
 {
+	int i;
 	struct kvm_ioapic *ioapic = vcpu->kvm->arch.vioapic;
 
 	spin_lock(&ioapic->lock);
-	__kvm_ioapic_update_eoi(vcpu, ioapic, vector, trigger_mode);
+	rtc_irq_eoi(ioapic, vcpu, vector);
+	for (i = 0; i < IOAPIC_NUM_PINS; i++) {
+		union kvm_ioapic_redirect_entry *ent = &ioapic->redirtbl[i];
+
+		if (ent->fields.vector != vector)
+			continue;
+		kvm_ioapic_update_eoi_one(vcpu, ioapic, trigger_mode, i);
+	}
 	spin_unlock(&ioapic->lock);
 }
 
diff --git a/arch/x86/kvm/ioapic.h b/arch/x86/kvm/ioapic.h
index ea1a4e0297da..2fb2e3c80724 100644
--- a/arch/x86/kvm/ioapic.h
+++ b/arch/x86/kvm/ioapic.h
@@ -116,9 +116,6 @@ static inline int ioapic_in_kernel(struct kvm *kvm)
 }
 
 void kvm_rtc_eoi_tracking_restore_one(struct kvm_vcpu *vcpu);
-bool kvm_apic_match_dest(struct kvm_vcpu *vcpu, struct kvm_lapic *source,
-		int short_hand, unsigned int dest, int dest_mode);
-int kvm_apic_compare_prio(struct kvm_vcpu *vcpu1, struct kvm_vcpu *vcpu2);
 void kvm_ioapic_update_eoi(struct kvm_vcpu *vcpu, int vector,
 			int trigger_mode);
 int kvm_ioapic_init(struct kvm *kvm);
@@ -126,9 +123,6 @@ void kvm_ioapic_destroy(struct kvm *kvm);
 int kvm_ioapic_set_irq(struct kvm_ioapic *ioapic, int irq, int irq_source_id,
 		       int level, bool line_status);
 void kvm_ioapic_clear_all(struct kvm_ioapic *ioapic, int irq_source_id);
-int kvm_irq_delivery_to_apic(struct kvm *kvm, struct kvm_lapic *src,
-			     struct kvm_lapic_irq *irq,
-			     struct dest_map *dest_map);
 void kvm_get_ioapic(struct kvm *kvm, struct kvm_ioapic_state *state);
 void kvm_set_ioapic(struct kvm *kvm, struct kvm_ioapic_state *state);
 void kvm_ioapic_scan_entry(struct kvm_vcpu *vcpu,
diff --git a/arch/x86/kvm/irq.h b/arch/x86/kvm/irq.h
index 7c6233d37c64..f173ab6b407e 100644
--- a/arch/x86/kvm/irq.h
+++ b/arch/x86/kvm/irq.h
@@ -113,5 +113,8 @@ int apic_has_pending_timer(struct kvm_vcpu *vcpu);
 
 int kvm_setup_default_irq_routing(struct kvm *kvm);
 int kvm_setup_empty_irq_routing(struct kvm *kvm);
+int kvm_irq_delivery_to_apic(struct kvm *kvm, struct kvm_lapic *src,
+			     struct kvm_lapic_irq *irq,
+			     struct dest_map *dest_map);
 
 #endif
diff --git a/arch/x86/kvm/irq_comm.c b/arch/x86/kvm/irq_comm.c
index 8ecd48d31800..79afa0bb5f41 100644
--- a/arch/x86/kvm/irq_comm.c
+++ b/arch/x86/kvm/irq_comm.c
@@ -52,15 +52,15 @@ int kvm_irq_delivery_to_apic(struct kvm *kvm, struct kvm_lapic *src,
 	unsigned long dest_vcpu_bitmap[BITS_TO_LONGS(KVM_MAX_VCPUS)];
 	unsigned int dest_vcpus = 0;
 
-	if (irq->dest_mode == 0 && irq->dest_id == 0xff &&
-			kvm_lowest_prio_delivery(irq)) {
+	if (kvm_irq_delivery_to_apic_fast(kvm, src, irq, &r, dest_map))
+		return r;
+
+	if (irq->dest_mode == APIC_DEST_PHYSICAL &&
+	    irq->dest_id == 0xff && kvm_lowest_prio_delivery(irq)) {
 		printk(KERN_INFO "kvm: apic: phys broadcast and lowest prio\n");
 		irq->delivery_mode = APIC_DM_FIXED;
 	}
 
-	if (kvm_irq_delivery_to_apic_fast(kvm, src, irq, &r, dest_map))
-		return r;
-
 	memset(dest_vcpu_bitmap, 0, sizeof(dest_vcpu_bitmap));
 
 	kvm_for_each_vcpu(i, vcpu, kvm) {
@@ -114,13 +114,14 @@ void kvm_set_msi_irq(struct kvm *kvm, struct kvm_kernel_irq_routing_entry *e,
 		irq->dest_id |= MSI_ADDR_EXT_DEST_ID(e->msi.address_hi);
 	irq->vector = (e->msi.data &
 			MSI_DATA_VECTOR_MASK) >> MSI_DATA_VECTOR_SHIFT;
-	irq->dest_mode = (1 << MSI_ADDR_DEST_MODE_SHIFT) & e->msi.address_lo;
+	irq->dest_mode = kvm_lapic_irq_dest_mode(
+	    !!((1 << MSI_ADDR_DEST_MODE_SHIFT) & e->msi.address_lo));
 	irq->trig_mode = (1 << MSI_DATA_TRIGGER_SHIFT) & e->msi.data;
 	irq->delivery_mode = e->msi.data & 0x700;
 	irq->msi_redir_hint = ((e->msi.address_lo
 		& MSI_ADDR_REDIRECTION_LOWPRI) > 0);
 	irq->level = 1;
-	irq->shorthand = 0;
+	irq->shorthand = APIC_DEST_NOSHORT;
 }
 EXPORT_SYMBOL_GPL(kvm_set_msi_irq);
 
@@ -416,7 +417,8 @@ void kvm_scan_ioapic_routes(struct kvm_vcpu *vcpu,
 
 			kvm_set_msi_irq(vcpu->kvm, entry, &irq);
 
-			if (irq.level && kvm_apic_match_dest(vcpu, NULL, 0,
+			if (irq.level &&
+			    kvm_apic_match_dest(vcpu, NULL, APIC_DEST_NOSHORT,
 						irq.dest_id, irq.dest_mode))
 				__set_bit(irq.vector, ioapic_handled_vectors);
 		}
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index cf9177b4a07f..eafc631d305c 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -56,9 +56,6 @@
 #define APIC_VERSION			(0x14UL | ((KVM_APIC_LVT_NUM - 1) << 16))
 #define LAPIC_MMIO_LENGTH		(1 << 12)
 /* followed define is not in apicdef.h */
-#define APIC_SHORT_MASK			0xc0000
-#define APIC_DEST_NOSHORT		0x0
-#define APIC_DEST_MASK			0x800
 #define MAX_APIC_VECTOR			256
 #define APIC_VECTORS_PER_REG		32
 
@@ -792,13 +789,13 @@ static u32 kvm_apic_mda(struct kvm_vcpu *vcpu, unsigned int dest_id,
 }
 
 bool kvm_apic_match_dest(struct kvm_vcpu *vcpu, struct kvm_lapic *source,
-			   int short_hand, unsigned int dest, int dest_mode)
+			   int shorthand, unsigned int dest, int dest_mode)
 {
 	struct kvm_lapic *target = vcpu->arch.apic;
 	u32 mda = kvm_apic_mda(vcpu, dest, source, target);
 
 	ASSERT(target);
-	switch (short_hand) {
+	switch (shorthand) {
 	case APIC_DEST_NOSHORT:
 		if (dest_mode == APIC_DEST_PHYSICAL)
 			return kvm_apic_match_physical_addr(target, mda);
@@ -967,12 +964,12 @@ bool kvm_irq_delivery_to_apic_fast(struct kvm *kvm, struct kvm_lapic *src,
 }
 
 /*
- * This routine tries to handler interrupts in posted mode, here is how
+ * This routine tries to handle interrupts in posted mode, here is how
  * it deals with different cases:
  * - For single-destination interrupts, handle it in posted mode
  * - Else if vector hashing is enabled and it is a lowest-priority
  *   interrupt, handle it in posted mode and use the following mechanism
- *   to find the destinaiton vCPU.
+ *   to find the destination vCPU.
  *	1. For lowest-priority interrupts, store all the possible
  *	   destination vCPUs in an array.
  *	2. Use "guest vector % max number of destination vCPUs" to find
@@ -1151,7 +1148,7 @@ void kvm_bitmap_or_dest_vcpus(struct kvm *kvm, struct kvm_lapic_irq *irq,
 			if (!kvm_apic_present(vcpu))
 				continue;
 			if (!kvm_apic_match_dest(vcpu, NULL,
-						 irq->delivery_mode,
+						 irq->shorthand,
 						 irq->dest_id,
 						 irq->dest_mode))
 				continue;
@@ -1574,9 +1571,9 @@ static void kvm_apic_inject_pending_timer_irqs(struct kvm_lapic *apic)
 	struct kvm_timer *ktimer = &apic->lapic_timer;
 
 	kvm_apic_local_deliver(apic, APIC_LVTT);
-	if (apic_lvtt_tscdeadline(apic))
+	if (apic_lvtt_tscdeadline(apic)) {
 		ktimer->tscdeadline = 0;
-	if (apic_lvtt_oneshot(apic)) {
+	} else if (apic_lvtt_oneshot(apic)) {
 		ktimer->tscdeadline = 0;
 		ktimer->target_expiration = 0;
 	}
@@ -1963,15 +1960,20 @@ int kvm_lapic_reg_write(struct kvm_lapic *apic, u32 reg, u32 val)
 	case APIC_LVTTHMR:
 	case APIC_LVTPC:
 	case APIC_LVT1:
-	case APIC_LVTERR:
+	case APIC_LVTERR: {
 		/* TODO: Check vector */
+		size_t size;
+		u32 index;
+
 		if (!kvm_apic_sw_enabled(apic))
 			val |= APIC_LVT_MASKED;
-
-		val &= apic_lvt_mask[(reg - APIC_LVTT) >> 4];
+		size = ARRAY_SIZE(apic_lvt_mask);
+		index = array_index_nospec(
+				(reg - APIC_LVTT) >> 4, size);
+		val &= apic_lvt_mask[index];
 		kvm_lapic_set_reg(apic, reg, val);
-
 		break;
+	}
 
 	case APIC_LVTT:
 		if (!kvm_apic_sw_enabled(apic))
@@ -2185,6 +2187,21 @@ void kvm_lapic_set_base(struct kvm_vcpu *vcpu, u64 value)
 		pr_warn_once("APIC base relocation is unsupported by KVM");
 }
 
+void kvm_apic_update_apicv(struct kvm_vcpu *vcpu)
+{
+	struct kvm_lapic *apic = vcpu->arch.apic;
+
+	if (vcpu->arch.apicv_active) {
+		/* irr_pending is always true when apicv is activated. */
+		apic->irr_pending = true;
+		apic->isr_count = 1;
+	} else {
+		apic->irr_pending = (apic_search_irr(apic) != -1);
+		apic->isr_count = count_vectors(apic->regs + APIC_ISR);
+	}
+}
+EXPORT_SYMBOL_GPL(kvm_apic_update_apicv);
+
 void kvm_lapic_reset(struct kvm_vcpu *vcpu, bool init_event)
 {
 	struct kvm_lapic *apic = vcpu->arch.apic;
@@ -2227,8 +2244,7 @@ void kvm_lapic_reset(struct kvm_vcpu *vcpu, bool init_event)
 		kvm_lapic_set_reg(apic, APIC_ISR + 0x10 * i, 0);
 		kvm_lapic_set_reg(apic, APIC_TMR + 0x10 * i, 0);
 	}
-	apic->irr_pending = vcpu->arch.apicv_active;
-	apic->isr_count = vcpu->arch.apicv_active ? 1 : 0;
+	kvm_apic_update_apicv(vcpu);
 	apic->highest_isr_cache = -1;
 	update_divide_count(apic);
 	atomic_set(&apic->lapic_timer.pending, 0);
@@ -2373,14 +2389,13 @@ int kvm_apic_has_interrupt(struct kvm_vcpu *vcpu)
 int kvm_apic_accept_pic_intr(struct kvm_vcpu *vcpu)
 {
 	u32 lvt0 = kvm_lapic_get_reg(vcpu->arch.apic, APIC_LVT0);
-	int r = 0;
 
 	if (!kvm_apic_hw_enabled(vcpu->arch.apic))
-		r = 1;
+		return 1;
 	if ((lvt0 & APIC_LVT_MASKED) == 0 &&
 	    GET_APIC_DELIVERY_MODE(lvt0) == APIC_MODE_EXTINT)
-		r = 1;
-	return r;
+		return 1;
+	return 0;
 }
 
 void kvm_inject_apic_timer_irqs(struct kvm_vcpu *vcpu)
@@ -2486,9 +2501,7 @@ int kvm_apic_set_state(struct kvm_vcpu *vcpu, struct kvm_lapic_state *s)
 	apic_manage_nmi_watchdog(apic, kvm_lapic_get_reg(apic, APIC_LVT0));
 	update_divide_count(apic);
 	start_apic_timer(apic);
-	apic->irr_pending = true;
-	apic->isr_count = vcpu->arch.apicv_active ?
-				1 : count_vectors(apic->regs + APIC_ISR);
+	kvm_apic_update_apicv(vcpu);
 	apic->highest_isr_cache = -1;
 	if (vcpu->arch.apicv_active) {
 		kvm_x86_ops->apicv_post_state_restore(vcpu);
diff --git a/arch/x86/kvm/lapic.h b/arch/x86/kvm/lapic.h
index 39925afdfcdc..ec6fbfe325cf 100644
--- a/arch/x86/kvm/lapic.h
+++ b/arch/x86/kvm/lapic.h
@@ -10,8 +10,9 @@
 #define KVM_APIC_SIPI		1
 #define KVM_APIC_LVT_NUM	6
 
-#define KVM_APIC_SHORT_MASK	0xc0000
-#define KVM_APIC_DEST_MASK	0x800
+#define APIC_SHORT_MASK			0xc0000
+#define APIC_DEST_NOSHORT		0x0
+#define APIC_DEST_MASK			0x800
 
 #define APIC_BUS_CYCLE_NS       1
 #define APIC_BUS_FREQUENCY      (1000000000ULL / APIC_BUS_CYCLE_NS)
@@ -82,14 +83,15 @@ int kvm_lapic_reg_write(struct kvm_lapic *apic, u32 reg, u32 val);
 int kvm_lapic_reg_read(struct kvm_lapic *apic, u32 offset, int len,
 		       void *data);
 bool kvm_apic_match_dest(struct kvm_vcpu *vcpu, struct kvm_lapic *source,
-			   int short_hand, unsigned int dest, int dest_mode);
-
+			   int shorthand, unsigned int dest, int dest_mode);
+int kvm_apic_compare_prio(struct kvm_vcpu *vcpu1, struct kvm_vcpu *vcpu2);
 bool __kvm_apic_update_irr(u32 *pir, void *regs, int *max_irr);
 bool kvm_apic_update_irr(struct kvm_vcpu *vcpu, u32 *pir, int *max_irr);
 void kvm_apic_update_ppr(struct kvm_vcpu *vcpu);
 int kvm_apic_set_irq(struct kvm_vcpu *vcpu, struct kvm_lapic_irq *irq,
 		     struct dest_map *dest_map);
 int kvm_apic_local_deliver(struct kvm_lapic *apic, int lvt_type);
+void kvm_apic_update_apicv(struct kvm_vcpu *vcpu);
 
 bool kvm_irq_delivery_to_apic_fast(struct kvm *kvm, struct kvm_lapic *src,
 		struct kvm_lapic_irq *irq, int *r, struct dest_map *dest_map);
diff --git a/arch/x86/kvm/mmu/mmu.c b/arch/x86/kvm/mmu/mmu.c
index a32b847a8089..7011a4e54866 100644
--- a/arch/x86/kvm/mmu/mmu.c
+++ b/arch/x86/kvm/mmu/mmu.c
@@ -418,22 +418,24 @@ static inline bool is_access_track_spte(u64 spte)
  * requires a full MMU zap).  The flag is instead explicitly queried when
  * checking for MMIO spte cache hits.
  */
-#define MMIO_SPTE_GEN_MASK		GENMASK_ULL(18, 0)
+#define MMIO_SPTE_GEN_MASK		GENMASK_ULL(17, 0)
 
 #define MMIO_SPTE_GEN_LOW_START		3
 #define MMIO_SPTE_GEN_LOW_END		11
 #define MMIO_SPTE_GEN_LOW_MASK		GENMASK_ULL(MMIO_SPTE_GEN_LOW_END, \
 						    MMIO_SPTE_GEN_LOW_START)
 
-#define MMIO_SPTE_GEN_HIGH_START	52
-#define MMIO_SPTE_GEN_HIGH_END		61
+#define MMIO_SPTE_GEN_HIGH_START	PT64_SECOND_AVAIL_BITS_SHIFT
+#define MMIO_SPTE_GEN_HIGH_END		62
 #define MMIO_SPTE_GEN_HIGH_MASK		GENMASK_ULL(MMIO_SPTE_GEN_HIGH_END, \
 						    MMIO_SPTE_GEN_HIGH_START)
+
 static u64 generation_mmio_spte_mask(u64 gen)
 {
 	u64 mask;
 
 	WARN_ON(gen & ~MMIO_SPTE_GEN_MASK);
+	BUILD_BUG_ON((MMIO_SPTE_GEN_HIGH_MASK | MMIO_SPTE_GEN_LOW_MASK) & SPTE_SPECIAL_MASK);
 
 	mask = (gen << MMIO_SPTE_GEN_LOW_START) & MMIO_SPTE_GEN_LOW_MASK;
 	mask |= (gen << MMIO_SPTE_GEN_HIGH_START) & MMIO_SPTE_GEN_HIGH_MASK;
@@ -444,16 +446,14 @@ static u64 get_mmio_spte_generation(u64 spte)
 {
 	u64 gen;
 
-	spte &= ~shadow_mmio_mask;
-
 	gen = (spte & MMIO_SPTE_GEN_LOW_MASK) >> MMIO_SPTE_GEN_LOW_START;
 	gen |= (spte & MMIO_SPTE_GEN_HIGH_MASK) >> MMIO_SPTE_GEN_HIGH_START;
 	return gen;
 }
 
-static void mark_mmio_spte(struct kvm_vcpu *vcpu, u64 *sptep, u64 gfn,
-			   unsigned access)
+static u64 make_mmio_spte(struct kvm_vcpu *vcpu, u64 gfn, unsigned int access)
 {
+
 	u64 gen = kvm_vcpu_memslots(vcpu)->generation & MMIO_SPTE_GEN_MASK;
 	u64 mask = generation_mmio_spte_mask(gen);
 	u64 gpa = gfn << PAGE_SHIFT;
@@ -464,6 +464,17 @@ static void mark_mmio_spte(struct kvm_vcpu *vcpu, u64 *sptep, u64 gfn,
 	mask |= (gpa & shadow_nonpresent_or_rsvd_mask)
 		<< shadow_nonpresent_or_rsvd_mask_len;
 
+	return mask;
+}
+
+static void mark_mmio_spte(struct kvm_vcpu *vcpu, u64 *sptep, u64 gfn,
+			   unsigned int access)
+{
+	u64 mask = make_mmio_spte(vcpu, gfn, access);
+	unsigned int gen = get_mmio_spte_generation(mask);
+
+	access = mask & ACC_ALL;
+
 	trace_mark_mmio_spte(sptep, gfn, access, gen);
 	mmu_spte_set(sptep, mask);
 }
@@ -484,7 +495,7 @@ static unsigned get_mmio_spte_access(u64 spte)
 }
 
 static bool set_mmio_spte(struct kvm_vcpu *vcpu, u64 *sptep, gfn_t gfn,
-			  kvm_pfn_t pfn, unsigned access)
+			  kvm_pfn_t pfn, unsigned int access)
 {
 	if (unlikely(is_noslot_pfn(pfn))) {
 		mark_mmio_spte(vcpu, sptep, gfn, access);
@@ -538,16 +549,20 @@ EXPORT_SYMBOL_GPL(kvm_mmu_set_mask_ptes);
 static u8 kvm_get_shadow_phys_bits(void)
 {
 	/*
-	 * boot_cpu_data.x86_phys_bits is reduced when MKTME is detected
-	 * in CPU detection code, but MKTME treats those reduced bits as
-	 * 'keyID' thus they are not reserved bits. Therefore for MKTME
-	 * we should still return physical address bits reported by CPUID.
+	 * boot_cpu_data.x86_phys_bits is reduced when MKTME or SME are detected
+	 * in CPU detection code, but the processor treats those reduced bits as
+	 * 'keyID' thus they are not reserved bits. Therefore KVM needs to look at
+	 * the physical address bits reported by CPUID.
 	 */
-	if (!boot_cpu_has(X86_FEATURE_TME) ||
-	    WARN_ON_ONCE(boot_cpu_data.extended_cpuid_level < 0x80000008))
-		return boot_cpu_data.x86_phys_bits;
+	if (likely(boot_cpu_data.extended_cpuid_level >= 0x80000008))
+		return cpuid_eax(0x80000008) & 0xff;
 
-	return cpuid_eax(0x80000008) & 0xff;
+	/*
+	 * Quite weird to have VMX or SVM but not MAXPHYADDR; probably a VM with
+	 * custom CPUID.  Proceed with whatever the kernel found since these features
+	 * aren't virtualizable (SME/SEV also require CPUIDs higher than 0x80000008).
+	 */
+	return boot_cpu_data.x86_phys_bits;
 }
 
 static void kvm_mmu_reset_all_pte_masks(void)
@@ -1260,56 +1275,6 @@ static void unaccount_huge_nx_page(struct kvm *kvm, struct kvm_mmu_page *sp)
 	list_del(&sp->lpage_disallowed_link);
 }
 
-static bool __mmu_gfn_lpage_is_disallowed(gfn_t gfn, int level,
-					  struct kvm_memory_slot *slot)
-{
-	struct kvm_lpage_info *linfo;
-
-	if (slot) {
-		linfo = lpage_info_slot(gfn, slot, level);
-		return !!linfo->disallow_lpage;
-	}
-
-	return true;
-}
-
-static bool mmu_gfn_lpage_is_disallowed(struct kvm_vcpu *vcpu, gfn_t gfn,
-					int level)
-{
-	struct kvm_memory_slot *slot;
-
-	slot = kvm_vcpu_gfn_to_memslot(vcpu, gfn);
-	return __mmu_gfn_lpage_is_disallowed(gfn, level, slot);
-}
-
-static int host_mapping_level(struct kvm *kvm, gfn_t gfn)
-{
-	unsigned long page_size;
-	int i, ret = 0;
-
-	page_size = kvm_host_page_size(kvm, gfn);
-
-	for (i = PT_PAGE_TABLE_LEVEL; i <= PT_MAX_HUGEPAGE_LEVEL; ++i) {
-		if (page_size >= KVM_HPAGE_SIZE(i))
-			ret = i;
-		else
-			break;
-	}
-
-	return ret;
-}
-
-static inline bool memslot_valid_for_gpte(struct kvm_memory_slot *slot,
-					  bool no_dirty_log)
-{
-	if (!slot || slot->flags & KVM_MEMSLOT_INVALID)
-		return false;
-	if (no_dirty_log && slot->dirty_bitmap)
-		return false;
-
-	return true;
-}
-
 static struct kvm_memory_slot *
 gfn_to_memslot_dirty_bitmap(struct kvm_vcpu *vcpu, gfn_t gfn,
 			    bool no_dirty_log)
@@ -1317,40 +1282,14 @@ gfn_to_memslot_dirty_bitmap(struct kvm_vcpu *vcpu, gfn_t gfn,
 	struct kvm_memory_slot *slot;
 
 	slot = kvm_vcpu_gfn_to_memslot(vcpu, gfn);
-	if (!memslot_valid_for_gpte(slot, no_dirty_log))
-		slot = NULL;
+	if (!slot || slot->flags & KVM_MEMSLOT_INVALID)
+		return NULL;
+	if (no_dirty_log && slot->dirty_bitmap)
+		return NULL;
 
 	return slot;
 }
 
-static int mapping_level(struct kvm_vcpu *vcpu, gfn_t large_gfn,
-			 bool *force_pt_level)
-{
-	int host_level, level, max_level;
-	struct kvm_memory_slot *slot;
-
-	if (unlikely(*force_pt_level))
-		return PT_PAGE_TABLE_LEVEL;
-
-	slot = kvm_vcpu_gfn_to_memslot(vcpu, large_gfn);
-	*force_pt_level = !memslot_valid_for_gpte(slot, true);
-	if (unlikely(*force_pt_level))
-		return PT_PAGE_TABLE_LEVEL;
-
-	host_level = host_mapping_level(vcpu->kvm, large_gfn);
-
-	if (host_level == PT_PAGE_TABLE_LEVEL)
-		return host_level;
-
-	max_level = min(kvm_x86_ops->get_lpage_level(), host_level);
-
-	for (level = PT_DIRECTORY_LEVEL; level <= max_level; ++level)
-		if (__mmu_gfn_lpage_is_disallowed(large_gfn, level, slot))
-			break;
-
-	return level - 1;
-}
-
 /*
  * About rmap_head encoding:
  *
@@ -1410,7 +1349,7 @@ pte_list_desc_remove_entry(struct kvm_rmap_head *rmap_head,
 	if (j != 0)
 		return;
 	if (!prev_desc && !desc->more)
-		rmap_head->val = (unsigned long)desc->sptes[0];
+		rmap_head->val = 0;
 	else
 		if (prev_desc)
 			prev_desc->more = desc->more;
@@ -1525,7 +1464,7 @@ struct rmap_iterator {
 /*
  * Iteration must be started by this function.  This should also be used after
  * removing/dropping sptes from the rmap link because in such cases the
- * information in the itererator may not be valid.
+ * information in the iterator may not be valid.
  *
  * Returns sptep if found, NULL otherwise.
  */
@@ -2547,7 +2486,7 @@ static struct kvm_mmu_page *kvm_mmu_get_page(struct kvm_vcpu *vcpu,
 					     gva_t gaddr,
 					     unsigned level,
 					     int direct,
-					     unsigned access)
+					     unsigned int access)
 {
 	union kvm_mmu_page_role role;
 	unsigned quadrant;
@@ -2899,6 +2838,26 @@ static bool prepare_zap_oldest_mmu_page(struct kvm *kvm,
 	return kvm_mmu_prepare_zap_page(kvm, sp, invalid_list);
 }
 
+static int make_mmu_pages_available(struct kvm_vcpu *vcpu)
+{
+	LIST_HEAD(invalid_list);
+
+	if (likely(kvm_mmu_available_pages(vcpu->kvm) >= KVM_MIN_FREE_MMU_PAGES))
+		return 0;
+
+	while (kvm_mmu_available_pages(vcpu->kvm) < KVM_REFILL_PAGES) {
+		if (!prepare_zap_oldest_mmu_page(vcpu->kvm, &invalid_list))
+			break;
+
+		++vcpu->kvm->stat.mmu_recycled;
+	}
+	kvm_mmu_commit_zap_page(vcpu->kvm, &invalid_list);
+
+	if (!kvm_mmu_available_pages(vcpu->kvm))
+		return -ENOSPC;
+	return 0;
+}
+
 /*
  * Changing the number of mmu pages allocated to the vm
  * Note: if goal_nr_mmu_pages is too small, you will get dead lock
@@ -3042,7 +3001,7 @@ static bool kvm_is_mmio_pfn(kvm_pfn_t pfn)
 #define SET_SPTE_NEED_REMOTE_TLB_FLUSH	BIT(1)
 
 static int set_spte(struct kvm_vcpu *vcpu, u64 *sptep,
-		    unsigned pte_access, int level,
+		    unsigned int pte_access, int level,
 		    gfn_t gfn, kvm_pfn_t pfn, bool speculative,
 		    bool can_unsync, bool host_writable)
 {
@@ -3099,17 +3058,6 @@ static int set_spte(struct kvm_vcpu *vcpu, u64 *sptep,
 	spte |= (u64)pfn << PAGE_SHIFT;
 
 	if (pte_access & ACC_WRITE_MASK) {
-
-		/*
-		 * Other vcpu creates new sp in the window between
-		 * mapping_level() and acquiring mmu-lock. We can
-		 * allow guest to retry the access, the mapping can
-		 * be fixed if guest refault.
-		 */
-		if (level > PT_PAGE_TABLE_LEVEL &&
-		    mmu_gfn_lpage_is_disallowed(vcpu, gfn, level))
-			goto done;
-
 		spte |= PT_WRITABLE_MASK | SPTE_MMU_WRITEABLE;
 
 		/*
@@ -3141,13 +3089,13 @@ static int set_spte(struct kvm_vcpu *vcpu, u64 *sptep,
 set_pte:
 	if (mmu_spte_update(sptep, spte))
 		ret |= SET_SPTE_NEED_REMOTE_TLB_FLUSH;
-done:
 	return ret;
 }
 
-static int mmu_set_spte(struct kvm_vcpu *vcpu, u64 *sptep, unsigned pte_access,
-			int write_fault, int level, gfn_t gfn, kvm_pfn_t pfn,
-		       	bool speculative, bool host_writable)
+static int mmu_set_spte(struct kvm_vcpu *vcpu, u64 *sptep,
+			unsigned int pte_access, int write_fault, int level,
+			gfn_t gfn, kvm_pfn_t pfn, bool speculative,
+			bool host_writable)
 {
 	int was_rmapped = 0;
 	int rmap_count;
@@ -3229,7 +3177,7 @@ static int direct_pte_prefetch_many(struct kvm_vcpu *vcpu,
 {
 	struct page *pages[PTE_PREFETCH_NUM];
 	struct kvm_memory_slot *slot;
-	unsigned access = sp->role.access;
+	unsigned int access = sp->role.access;
 	int i, ret;
 	gfn_t gfn;
 
@@ -3294,6 +3242,83 @@ static void direct_pte_prefetch(struct kvm_vcpu *vcpu, u64 *sptep)
 	__direct_pte_prefetch(vcpu, sp, sptep);
 }
 
+static int host_pfn_mapping_level(struct kvm_vcpu *vcpu, gfn_t gfn,
+				  kvm_pfn_t pfn, struct kvm_memory_slot *slot)
+{
+	unsigned long hva;
+	pte_t *pte;
+	int level;
+
+	BUILD_BUG_ON(PT_PAGE_TABLE_LEVEL != (int)PG_LEVEL_4K ||
+		     PT_DIRECTORY_LEVEL != (int)PG_LEVEL_2M ||
+		     PT_PDPE_LEVEL != (int)PG_LEVEL_1G);
+
+	if (!PageCompound(pfn_to_page(pfn)) && !kvm_is_zone_device_pfn(pfn))
+		return PT_PAGE_TABLE_LEVEL;
+
+	/*
+	 * Note, using the already-retrieved memslot and __gfn_to_hva_memslot()
+	 * is not solely for performance, it's also necessary to avoid the
+	 * "writable" check in __gfn_to_hva_many(), which will always fail on
+	 * read-only memslots due to gfn_to_hva() assuming writes.  Earlier
+	 * page fault steps have already verified the guest isn't writing a
+	 * read-only memslot.
+	 */
+	hva = __gfn_to_hva_memslot(slot, gfn);
+
+	pte = lookup_address_in_mm(vcpu->kvm->mm, hva, &level);
+	if (unlikely(!pte))
+		return PT_PAGE_TABLE_LEVEL;
+
+	return level;
+}
+
+static int kvm_mmu_hugepage_adjust(struct kvm_vcpu *vcpu, gfn_t gfn,
+				   int max_level, kvm_pfn_t *pfnp)
+{
+	struct kvm_memory_slot *slot;
+	struct kvm_lpage_info *linfo;
+	kvm_pfn_t pfn = *pfnp;
+	kvm_pfn_t mask;
+	int level;
+
+	if (unlikely(max_level == PT_PAGE_TABLE_LEVEL))
+		return PT_PAGE_TABLE_LEVEL;
+
+	if (is_error_noslot_pfn(pfn) || kvm_is_reserved_pfn(pfn))
+		return PT_PAGE_TABLE_LEVEL;
+
+	slot = gfn_to_memslot_dirty_bitmap(vcpu, gfn, true);
+	if (!slot)
+		return PT_PAGE_TABLE_LEVEL;
+
+	max_level = min(max_level, kvm_x86_ops->get_lpage_level());
+	for ( ; max_level > PT_PAGE_TABLE_LEVEL; max_level--) {
+		linfo = lpage_info_slot(gfn, slot, max_level);
+		if (!linfo->disallow_lpage)
+			break;
+	}
+
+	if (max_level == PT_PAGE_TABLE_LEVEL)
+		return PT_PAGE_TABLE_LEVEL;
+
+	level = host_pfn_mapping_level(vcpu, gfn, pfn, slot);
+	if (level == PT_PAGE_TABLE_LEVEL)
+		return level;
+
+	level = min(level, max_level);
+
+	/*
+	 * mmu_notifier_retry() was successful and mmu_lock is held, so
+	 * the pmd can't be split from under us.
+	 */
+	mask = KVM_PAGES_PER_HPAGE(level) - 1;
+	VM_BUG_ON((gfn & mask) != (pfn & mask));
+	*pfnp = pfn & ~mask;
+
+	return level;
+}
+
 static void disallowed_hugepage_adjust(struct kvm_shadow_walk_iterator it,
 				       gfn_t gfn, kvm_pfn_t *pfnp, int *levelp)
 {
@@ -3318,18 +3343,20 @@ static void disallowed_hugepage_adjust(struct kvm_shadow_walk_iterator it,
 }
 
 static int __direct_map(struct kvm_vcpu *vcpu, gpa_t gpa, int write,
-			int map_writable, int level, kvm_pfn_t pfn,
-			bool prefault, bool lpage_disallowed)
+			int map_writable, int max_level, kvm_pfn_t pfn,
+			bool prefault, bool account_disallowed_nx_lpage)
 {
 	struct kvm_shadow_walk_iterator it;
 	struct kvm_mmu_page *sp;
-	int ret;
+	int level, ret;
 	gfn_t gfn = gpa >> PAGE_SHIFT;
 	gfn_t base_gfn = gfn;
 
-	if (!VALID_PAGE(vcpu->arch.mmu->root_hpa))
+	if (WARN_ON(!VALID_PAGE(vcpu->arch.mmu->root_hpa)))
 		return RET_PF_RETRY;
 
+	level = kvm_mmu_hugepage_adjust(vcpu, gfn, max_level, &pfn);
+
 	trace_kvm_mmu_spte_requested(gpa, level, pfn);
 	for_each_shadow_entry(vcpu, gpa, it) {
 		/*
@@ -3348,7 +3375,7 @@ static int __direct_map(struct kvm_vcpu *vcpu, gpa_t gpa, int write,
 					      it.level - 1, true, ACC_ALL);
 
 			link_shadow_page(vcpu, it.sptep, sp);
-			if (lpage_disallowed)
+			if (account_disallowed_nx_lpage)
 				account_huge_nx_page(vcpu->kvm, sp);
 		}
 	}
@@ -3384,47 +3411,9 @@ static int kvm_handle_bad_page(struct kvm_vcpu *vcpu, gfn_t gfn, kvm_pfn_t pfn)
 	return -EFAULT;
 }
 
-static void transparent_hugepage_adjust(struct kvm_vcpu *vcpu,
-					gfn_t gfn, kvm_pfn_t *pfnp,
-					int *levelp)
-{
-	kvm_pfn_t pfn = *pfnp;
-	int level = *levelp;
-
-	/*
-	 * Check if it's a transparent hugepage. If this would be an
-	 * hugetlbfs page, level wouldn't be set to
-	 * PT_PAGE_TABLE_LEVEL and there would be no adjustment done
-	 * here.
-	 */
-	if (!is_error_noslot_pfn(pfn) && !kvm_is_reserved_pfn(pfn) &&
-	    !kvm_is_zone_device_pfn(pfn) && level == PT_PAGE_TABLE_LEVEL &&
-	    PageTransCompoundMap(pfn_to_page(pfn)) &&
-	    !mmu_gfn_lpage_is_disallowed(vcpu, gfn, PT_DIRECTORY_LEVEL)) {
-		unsigned long mask;
-		/*
-		 * mmu_notifier_retry was successful and we hold the
-		 * mmu_lock here, so the pmd can't become splitting
-		 * from under us, and in turn
-		 * __split_huge_page_refcount() can't run from under
-		 * us and we can safely transfer the refcount from
-		 * PG_tail to PG_head as we switch the pfn to tail to
-		 * head.
-		 */
-		*levelp = level = PT_DIRECTORY_LEVEL;
-		mask = KVM_PAGES_PER_HPAGE(level) - 1;
-		VM_BUG_ON((gfn & mask) != (pfn & mask));
-		if (pfn & mask) {
-			kvm_release_pfn_clean(pfn);
-			pfn &= ~mask;
-			kvm_get_pfn(pfn);
-			*pfnp = pfn;
-		}
-	}
-}
-
 static bool handle_abnormal_pfn(struct kvm_vcpu *vcpu, gva_t gva, gfn_t gfn,
-				kvm_pfn_t pfn, unsigned access, int *ret_val)
+				kvm_pfn_t pfn, unsigned int access,
+				int *ret_val)
 {
 	/* The pfn is invalid, report the error! */
 	if (unlikely(is_error_pfn(pfn))) {
@@ -3528,7 +3517,7 @@ static bool is_access_allowed(u32 fault_err_code, u64 spte)
  * - true: let the vcpu to access on the same address again.
  * - false: let the real page fault path to fix it.
  */
-static bool fast_page_fault(struct kvm_vcpu *vcpu, gva_t gva, int level,
+static bool fast_page_fault(struct kvm_vcpu *vcpu, gpa_t cr2_or_gpa,
 			    u32 error_code)
 {
 	struct kvm_shadow_walk_iterator iterator;
@@ -3537,9 +3526,6 @@ static bool fast_page_fault(struct kvm_vcpu *vcpu, gva_t gva, int level,
 	u64 spte = 0ull;
 	uint retry_count = 0;
 
-	if (!VALID_PAGE(vcpu->arch.mmu->root_hpa))
-		return false;
-
 	if (!page_fault_can_be_fast(error_code))
 		return false;
 
@@ -3548,9 +3534,8 @@ static bool fast_page_fault(struct kvm_vcpu *vcpu, gva_t gva, int level,
 	do {
 		u64 new_spte;
 
-		for_each_shadow_entry_lockless(vcpu, gva, iterator, spte)
-			if (!is_shadow_present_pte(spte) ||
-			    iterator.level < level)
+		for_each_shadow_entry_lockless(vcpu, cr2_or_gpa, iterator, spte)
+			if (!is_shadow_present_pte(spte))
 				break;
 
 		sp = page_header(__pa(iterator.sptep));
@@ -3626,71 +3611,13 @@ static bool fast_page_fault(struct kvm_vcpu *vcpu, gva_t gva, int level,
 
 	} while (true);
 
-	trace_fast_page_fault(vcpu, gva, error_code, iterator.sptep,
+	trace_fast_page_fault(vcpu, cr2_or_gpa, error_code, iterator.sptep,
 			      spte, fault_handled);
 	walk_shadow_page_lockless_end(vcpu);
 
 	return fault_handled;
 }
 
-static bool try_async_pf(struct kvm_vcpu *vcpu, bool prefault, gfn_t gfn,
-			 gva_t gva, kvm_pfn_t *pfn, bool write, bool *writable);
-static int make_mmu_pages_available(struct kvm_vcpu *vcpu);
-
-static int nonpaging_map(struct kvm_vcpu *vcpu, gva_t v, u32 error_code,
-			 gfn_t gfn, bool prefault)
-{
-	int r;
-	int level;
-	bool force_pt_level;
-	kvm_pfn_t pfn;
-	unsigned long mmu_seq;
-	bool map_writable, write = error_code & PFERR_WRITE_MASK;
-	bool lpage_disallowed = (error_code & PFERR_FETCH_MASK) &&
-				is_nx_huge_page_enabled();
-
-	force_pt_level = lpage_disallowed;
-	level = mapping_level(vcpu, gfn, &force_pt_level);
-	if (likely(!force_pt_level)) {
-		/*
-		 * This path builds a PAE pagetable - so we can map
-		 * 2mb pages at maximum. Therefore check if the level
-		 * is larger than that.
-		 */
-		if (level > PT_DIRECTORY_LEVEL)
-			level = PT_DIRECTORY_LEVEL;
-
-		gfn &= ~(KVM_PAGES_PER_HPAGE(level) - 1);
-	}
-
-	if (fast_page_fault(vcpu, v, level, error_code))
-		return RET_PF_RETRY;
-
-	mmu_seq = vcpu->kvm->mmu_notifier_seq;
-	smp_rmb();
-
-	if (try_async_pf(vcpu, prefault, gfn, v, &pfn, write, &map_writable))
-		return RET_PF_RETRY;
-
-	if (handle_abnormal_pfn(vcpu, v, gfn, pfn, ACC_ALL, &r))
-		return r;
-
-	r = RET_PF_RETRY;
-	spin_lock(&vcpu->kvm->mmu_lock);
-	if (mmu_notifier_retry(vcpu->kvm, mmu_seq))
-		goto out_unlock;
-	if (make_mmu_pages_available(vcpu) < 0)
-		goto out_unlock;
-	if (likely(!force_pt_level))
-		transparent_hugepage_adjust(vcpu, gfn, &pfn, &level);
-	r = __direct_map(vcpu, v, write, map_writable, level, pfn,
-			 prefault, false);
-out_unlock:
-	spin_unlock(&vcpu->kvm->mmu_lock);
-	kvm_release_pfn_clean(pfn);
-	return r;
-}
-
 static void mmu_free_root_page(struct kvm *kvm, hpa_t *root_hpa,
 			       struct list_head *invalid_list)
 {
@@ -3981,7 +3908,7 @@ void kvm_mmu_sync_roots(struct kvm_vcpu *vcpu)
 }
 EXPORT_SYMBOL_GPL(kvm_mmu_sync_roots);
 
-static gpa_t nonpaging_gva_to_gpa(struct kvm_vcpu *vcpu, gva_t vaddr,
+static gpa_t nonpaging_gva_to_gpa(struct kvm_vcpu *vcpu, gpa_t vaddr,
 				  u32 access, struct x86_exception *exception)
 {
 	if (exception)
@@ -3989,7 +3916,7 @@ static gpa_t nonpaging_gva_to_gpa(struct kvm_vcpu *vcpu, gva_t vaddr,
 	return vaddr;
 }
 
-static gpa_t nonpaging_gva_to_gpa_nested(struct kvm_vcpu *vcpu, gva_t vaddr,
+static gpa_t nonpaging_gva_to_gpa_nested(struct kvm_vcpu *vcpu, gpa_t vaddr,
 					 u32 access,
 					 struct x86_exception *exception)
 {
@@ -4001,20 +3928,14 @@ static gpa_t nonpaging_gva_to_gpa_nested(struct kvm_vcpu *vcpu, gva_t vaddr,
 static bool
 __is_rsvd_bits_set(struct rsvd_bits_validate *rsvd_check, u64 pte, int level)
 {
-	int bit7 = (pte >> 7) & 1, low6 = pte & 0x3f;
-
-	return (pte & rsvd_check->rsvd_bits_mask[bit7][level-1]) |
-		((rsvd_check->bad_mt_xwr & (1ull << low6)) != 0);
-}
+	int bit7 = (pte >> 7) & 1;
 
-static bool is_rsvd_bits_set(struct kvm_mmu *mmu, u64 gpte, int level)
-{
-	return __is_rsvd_bits_set(&mmu->guest_rsvd_check, gpte, level);
+	return pte & rsvd_check->rsvd_bits_mask[bit7][level-1];
 }
 
-static bool is_shadow_zero_bits_set(struct kvm_mmu *mmu, u64 spte, int level)
+static bool __is_bad_mt_xwr(struct rsvd_bits_validate *rsvd_check, u64 pte)
 {
-	return __is_rsvd_bits_set(&mmu->shadow_zero_check, spte, level);
+	return rsvd_check->bad_mt_xwr & BIT_ULL(pte & 0x3f);
 }
 
 static bool mmio_info_in_cache(struct kvm_vcpu *vcpu, u64 addr, bool direct)
@@ -4038,11 +3959,11 @@ walk_shadow_page_get_mmio_spte(struct kvm_vcpu *vcpu, u64 addr, u64 *sptep)
 {
 	struct kvm_shadow_walk_iterator iterator;
 	u64 sptes[PT64_ROOT_MAX_LEVEL], spte = 0ull;
+	struct rsvd_bits_validate *rsvd_check;
 	int root, leaf;
 	bool reserved = false;
 
-	if (!VALID_PAGE(vcpu->arch.mmu->root_hpa))
-		goto exit;
+	rsvd_check = &vcpu->arch.mmu->shadow_zero_check;
 
 	walk_shadow_page_lockless_begin(vcpu);
 
@@ -4058,8 +3979,13 @@ walk_shadow_page_get_mmio_spte(struct kvm_vcpu *vcpu, u64 addr, u64 *sptep)
 		if (!is_shadow_present_pte(spte))
 			break;
 
-		reserved |= is_shadow_zero_bits_set(vcpu->arch.mmu, spte,
-						    iterator.level);
+		/*
+		 * Use a bitwise-OR instead of a logical-OR to aggregate the
+		 * reserved bit and EPT's invalid memtype/XWR checks to avoid
+		 * adding a Jcc in the loop.
+		 */
+		reserved |= __is_bad_mt_xwr(rsvd_check, spte) |
+			    __is_rsvd_bits_set(rsvd_check, spte, iterator.level);
 	}
 
 	walk_shadow_page_lockless_end(vcpu);
@@ -4073,7 +3999,7 @@ walk_shadow_page_get_mmio_spte(struct kvm_vcpu *vcpu, u64 addr, u64 *sptep)
 			root--;
 		}
 	}
-exit:
+
 	*sptep = spte;
 	return reserved;
 }
@@ -4092,7 +4018,7 @@ static int handle_mmio_page_fault(struct kvm_vcpu *vcpu, u64 addr, bool direct)
 
 	if (is_mmio_spte(spte)) {
 		gfn_t gfn = get_mmio_spte_gfn(spte);
-		unsigned access = get_mmio_spte_access(spte);
+		unsigned int access = get_mmio_spte_access(spte);
 
 		if (!check_mmio_spte(vcpu, spte))
 			return RET_PF_INVALID;
@@ -4137,9 +4063,6 @@ static void shadow_page_table_clear_flood(struct kvm_vcpu *vcpu, gva_t addr)
 	struct kvm_shadow_walk_iterator iterator;
 	u64 spte;
 
-	if (!VALID_PAGE(vcpu->arch.mmu->root_hpa))
-		return;
-
 	walk_shadow_page_lockless_begin(vcpu);
 	for_each_shadow_entry_lockless(vcpu, addr, iterator, spte) {
 		clear_sp_write_flooding_count(iterator.sptep);
@@ -4149,29 +4072,8 @@ static void shadow_page_table_clear_flood(struct kvm_vcpu *vcpu, gva_t addr)
 	walk_shadow_page_lockless_end(vcpu);
 }
 
-static int nonpaging_page_fault(struct kvm_vcpu *vcpu, gva_t gva,
-				u32 error_code, bool prefault)
-{
-	gfn_t gfn = gva >> PAGE_SHIFT;
-	int r;
-
-	pgprintk("%s: gva %lx error %x\n", __func__, gva, error_code);
-
-	if (page_fault_handle_page_track(vcpu, error_code, gfn))
-		return RET_PF_EMULATE;
-
-	r = mmu_topup_memory_caches(vcpu);
-	if (r)
-		return r;
-
-	MMU_WARN_ON(!VALID_PAGE(vcpu->arch.mmu->root_hpa));
-
-
-	return nonpaging_map(vcpu, gva & PAGE_MASK,
-			     error_code, gfn, prefault);
-}
-
-static int kvm_arch_setup_async_pf(struct kvm_vcpu *vcpu, gva_t gva, gfn_t gfn)
+static int kvm_arch_setup_async_pf(struct kvm_vcpu *vcpu, gpa_t cr2_or_gpa,
+				   gfn_t gfn)
 {
 	struct kvm_arch_async_pf arch;
 
@@ -4180,11 +4082,13 @@ static int kvm_arch_setup_async_pf(struct kvm_vcpu *vcpu, gva_t gva, gfn_t gfn)
 	arch.direct_map = vcpu->arch.mmu->direct_map;
 	arch.cr3 = vcpu->arch.mmu->get_cr3(vcpu);
 
-	return kvm_setup_async_pf(vcpu, gva, kvm_vcpu_gfn_to_hva(vcpu, gfn), &arch);
+	return kvm_setup_async_pf(vcpu, cr2_or_gpa,
+				  kvm_vcpu_gfn_to_hva(vcpu, gfn), &arch);
 }
 
 static bool try_async_pf(struct kvm_vcpu *vcpu, bool prefault, gfn_t gfn,
-			 gva_t gva, kvm_pfn_t *pfn, bool write, bool *writable)
+			 gpa_t cr2_or_gpa, kvm_pfn_t *pfn, bool write,
+			 bool *writable)
 {
 	struct kvm_memory_slot *slot;
 	bool async;
@@ -4204,12 +4108,12 @@ static bool try_async_pf(struct kvm_vcpu *vcpu, bool prefault, gfn_t gfn,
 		return false; /* *pfn has correct page already */
 
 	if (!prefault && kvm_can_do_async_pf(vcpu)) {
-		trace_kvm_try_async_get_page(gva, gfn);
+		trace_kvm_try_async_get_page(cr2_or_gpa, gfn);
 		if (kvm_find_async_pf_gfn(vcpu, gfn)) {
-			trace_kvm_async_pf_doublefault(gva, gfn);
+			trace_kvm_async_pf_doublefault(cr2_or_gpa, gfn);
 			kvm_make_request(KVM_REQ_APF_HALT, vcpu);
 			return true;
-		} else if (kvm_arch_setup_async_pf(vcpu, gva, gfn))
+		} else if (kvm_arch_setup_async_pf(vcpu, cr2_or_gpa, gfn))
 			return true;
 	}
 
@@ -4217,11 +4121,77 @@ static bool try_async_pf(struct kvm_vcpu *vcpu, bool prefault, gfn_t gfn,
 	return false;
 }
 
+static int direct_page_fault(struct kvm_vcpu *vcpu, gpa_t gpa, u32 error_code,
+			     bool prefault, int max_level, bool is_tdp)
+{
+	bool write = error_code & PFERR_WRITE_MASK;
+	bool exec = error_code & PFERR_FETCH_MASK;
+	bool lpage_disallowed = exec && is_nx_huge_page_enabled();
+	bool map_writable;
+
+	gfn_t gfn = gpa >> PAGE_SHIFT;
+	unsigned long mmu_seq;
+	kvm_pfn_t pfn;
+	int r;
+
+	if (page_fault_handle_page_track(vcpu, error_code, gfn))
+		return RET_PF_EMULATE;
+
+	r = mmu_topup_memory_caches(vcpu);
+	if (r)
+		return r;
+
+	if (lpage_disallowed)
+		max_level = PT_PAGE_TABLE_LEVEL;
+
+	if (fast_page_fault(vcpu, gpa, error_code))
+		return RET_PF_RETRY;
+
+	mmu_seq = vcpu->kvm->mmu_notifier_seq;
+	smp_rmb();
+
+	if (try_async_pf(vcpu, prefault, gfn, gpa, &pfn, write, &map_writable))
+		return RET_PF_RETRY;
+
+	if (handle_abnormal_pfn(vcpu, is_tdp ? 0 : gpa, gfn, pfn, ACC_ALL, &r))
+		return r;
+
+	r = RET_PF_RETRY;
+	spin_lock(&vcpu->kvm->mmu_lock);
+	if (mmu_notifier_retry(vcpu->kvm, mmu_seq))
+		goto out_unlock;
+	if (make_mmu_pages_available(vcpu) < 0)
+		goto out_unlock;
+	r = __direct_map(vcpu, gpa, write, map_writable, max_level, pfn,
+			 prefault, is_tdp && lpage_disallowed);
+
+out_unlock:
+	spin_unlock(&vcpu->kvm->mmu_lock);
+	kvm_release_pfn_clean(pfn);
+	return r;
+}
+
+static int nonpaging_page_fault(struct kvm_vcpu *vcpu, gpa_t gpa,
+				u32 error_code, bool prefault)
+{
+	pgprintk("%s: gva %lx error %x\n", __func__, gpa, error_code);
+
+	/* This path builds a PAE pagetable, we can map 2mb pages at maximum. */
+	return direct_page_fault(vcpu, gpa & PAGE_MASK, error_code, prefault,
+				 PT_DIRECTORY_LEVEL, false);
+}
+
 int kvm_handle_page_fault(struct kvm_vcpu *vcpu, u64 error_code,
 				u64 fault_address, char *insn, int insn_len)
 {
 	int r = 1;
 
+#ifndef CONFIG_X86_64
+	/* A 64-bit CR2 should be impossible on 32-bit KVM. */
+	if (WARN_ON_ONCE(fault_address >> 32))
+		return -EFAULT;
+#endif
+
 	vcpu->arch.l1tf_flush_l1d = true;
 	switch (vcpu->arch.apf.host_apf_reason) {
 	default:
@@ -4249,76 +4219,23 @@ int kvm_handle_page_fault(struct kvm_vcpu *vcpu, u64 error_code,
 }
 EXPORT_SYMBOL_GPL(kvm_handle_page_fault);
 
-static bool
-check_hugepage_cache_consistency(struct kvm_vcpu *vcpu, gfn_t gfn, int level)
-{
-	int page_num = KVM_PAGES_PER_HPAGE(level);
-
-	gfn &= ~(page_num - 1);
-
-	return kvm_mtrr_check_gfn_range_consistency(vcpu, gfn, page_num);
-}
-
-static int tdp_page_fault(struct kvm_vcpu *vcpu, gva_t gpa, u32 error_code,
+static int tdp_page_fault(struct kvm_vcpu *vcpu, gpa_t gpa, u32 error_code,
 			  bool prefault)
 {
-	kvm_pfn_t pfn;
-	int r;
-	int level;
-	bool force_pt_level;
-	gfn_t gfn = gpa >> PAGE_SHIFT;
-	unsigned long mmu_seq;
-	int write = error_code & PFERR_WRITE_MASK;
-	bool map_writable;
-	bool lpage_disallowed = (error_code & PFERR_FETCH_MASK) &&
-				is_nx_huge_page_enabled();
-
-	MMU_WARN_ON(!VALID_PAGE(vcpu->arch.mmu->root_hpa));
+	int max_level;
 
-	if (page_fault_handle_page_track(vcpu, error_code, gfn))
-		return RET_PF_EMULATE;
-
-	r = mmu_topup_memory_caches(vcpu);
-	if (r)
-		return r;
+	for (max_level = PT_MAX_HUGEPAGE_LEVEL;
+	     max_level > PT_PAGE_TABLE_LEVEL;
+	     max_level--) {
+		int page_num = KVM_PAGES_PER_HPAGE(max_level);
+		gfn_t base = (gpa >> PAGE_SHIFT) & ~(page_num - 1);
 
-	force_pt_level =
-		lpage_disallowed ||
-		!check_hugepage_cache_consistency(vcpu, gfn, PT_DIRECTORY_LEVEL);
-	level = mapping_level(vcpu, gfn, &force_pt_level);
-	if (likely(!force_pt_level)) {
-		if (level > PT_DIRECTORY_LEVEL &&
-		    !check_hugepage_cache_consistency(vcpu, gfn, level))
-			level = PT_DIRECTORY_LEVEL;
-		gfn &= ~(KVM_PAGES_PER_HPAGE(level) - 1);
+		if (kvm_mtrr_check_gfn_range_consistency(vcpu, base, page_num))
+			break;
 	}
 
-	if (fast_page_fault(vcpu, gpa, level, error_code))
-		return RET_PF_RETRY;
-
-	mmu_seq = vcpu->kvm->mmu_notifier_seq;
-	smp_rmb();
-
-	if (try_async_pf(vcpu, prefault, gfn, gpa, &pfn, write, &map_writable))
-		return RET_PF_RETRY;
-
-	if (handle_abnormal_pfn(vcpu, 0, gfn, pfn, ACC_ALL, &r))
-		return r;
-
-	r = RET_PF_RETRY;
-	spin_lock(&vcpu->kvm->mmu_lock);
-	if (mmu_notifier_retry(vcpu->kvm, mmu_seq))
-		goto out_unlock;
-	if (make_mmu_pages_available(vcpu) < 0)
-		goto out_unlock;
-	if (likely(!force_pt_level))
-		transparent_hugepage_adjust(vcpu, gfn, &pfn, &level);
-	r = __direct_map(vcpu, gpa, write, map_writable, level, pfn,
-			 prefault, lpage_disallowed);
-out_unlock:
-	spin_unlock(&vcpu->kvm->mmu_lock);
-	kvm_release_pfn_clean(pfn);
-	return r;
+	return direct_page_fault(vcpu, gpa, error_code, prefault,
+				 max_level, true);
 }
 
 static void nonpaging_init_context(struct kvm_vcpu *vcpu,
@@ -4445,7 +4362,7 @@ static void inject_page_fault(struct kvm_vcpu *vcpu,
 }
 
 static bool sync_mmio_spte(struct kvm_vcpu *vcpu, u64 *sptep, gfn_t gfn,
-			   unsigned access, int *nr_present)
+			   unsigned int access, int *nr_present)
 {
 	if (unlikely(is_mmio_spte(*sptep))) {
 		if (gfn != get_mmio_spte_gfn(*sptep)) {
@@ -5496,47 +5413,30 @@ int kvm_mmu_unprotect_page_virt(struct kvm_vcpu *vcpu, gva_t gva)
 }
 EXPORT_SYMBOL_GPL(kvm_mmu_unprotect_page_virt);
 
-static int make_mmu_pages_available(struct kvm_vcpu *vcpu)
-{
-	LIST_HEAD(invalid_list);
-
-	if (likely(kvm_mmu_available_pages(vcpu->kvm) >= KVM_MIN_FREE_MMU_PAGES))
-		return 0;
-
-	while (kvm_mmu_available_pages(vcpu->kvm) < KVM_REFILL_PAGES) {
-		if (!prepare_zap_oldest_mmu_page(vcpu->kvm, &invalid_list))
-			break;
-
-		++vcpu->kvm->stat.mmu_recycled;
-	}
-	kvm_mmu_commit_zap_page(vcpu->kvm, &invalid_list);
-
-	if (!kvm_mmu_available_pages(vcpu->kvm))
-		return -ENOSPC;
-	return 0;
-}
-
-int kvm_mmu_page_fault(struct kvm_vcpu *vcpu, gva_t cr2, u64 error_code,
+int kvm_mmu_page_fault(struct kvm_vcpu *vcpu, gpa_t cr2_or_gpa, u64 error_code,
 		       void *insn, int insn_len)
 {
 	int r, emulation_type = 0;
 	bool direct = vcpu->arch.mmu->direct_map;
 
+	if (WARN_ON(!VALID_PAGE(vcpu->arch.mmu->root_hpa)))
+		return RET_PF_RETRY;
+
 	/* With shadow page tables, fault_address contains a GVA or nGPA.  */
 	if (vcpu->arch.mmu->direct_map) {
 		vcpu->arch.gpa_available = true;
-		vcpu->arch.gpa_val = cr2;
+		vcpu->arch.gpa_val = cr2_or_gpa;
 	}
 
 	r = RET_PF_INVALID;
 	if (unlikely(error_code & PFERR_RSVD_MASK)) {
-		r = handle_mmio_page_fault(vcpu, cr2, direct);
+		r = handle_mmio_page_fault(vcpu, cr2_or_gpa, direct);
 		if (r == RET_PF_EMULATE)
 			goto emulate;
 	}
 
 	if (r == RET_PF_INVALID) {
-		r = vcpu->arch.mmu->page_fault(vcpu, cr2,
+		r = vcpu->arch.mmu->page_fault(vcpu, cr2_or_gpa,
 					       lower_32_bits(error_code),
 					       false);
 		WARN_ON(r == RET_PF_INVALID);
@@ -5556,7 +5456,7 @@ int kvm_mmu_page_fault(struct kvm_vcpu *vcpu, gva_t cr2, u64 error_code,
 	 */
 	if (vcpu->arch.mmu->direct_map &&
 	    (error_code & PFERR_NESTED_GUEST_PAGE) == PFERR_NESTED_GUEST_PAGE) {
-		kvm_mmu_unprotect_page(vcpu->kvm, gpa_to_gfn(cr2));
+		kvm_mmu_unprotect_page(vcpu->kvm, gpa_to_gfn(cr2_or_gpa));
 		return 1;
 	}
 
@@ -5571,7 +5471,7 @@ int kvm_mmu_page_fault(struct kvm_vcpu *vcpu, gva_t cr2, u64 error_code,
 	 * explicitly shadowing L1's page tables, i.e. unprotecting something
 	 * for L1 isn't going to magically fix whatever issue cause L2 to fail.
 	 */
-	if (!mmio_info_in_cache(vcpu, cr2, direct) && !is_guest_mode(vcpu))
+	if (!mmio_info_in_cache(vcpu, cr2_or_gpa, direct) && !is_guest_mode(vcpu))
 		emulation_type = EMULTYPE_ALLOW_RETRY;
 emulate:
 	/*
@@ -5586,7 +5486,7 @@ emulate:
 			return 1;
 	}
 
-	return x86_emulate_instruction(vcpu, cr2, emulation_type, insn,
+	return x86_emulate_instruction(vcpu, cr2_or_gpa, emulation_type, insn,
 				       insn_len);
 }
 EXPORT_SYMBOL_GPL(kvm_mmu_page_fault);
@@ -6015,8 +5915,8 @@ restart:
 		 * mapping if the indirect sp has level = 1.
 		 */
 		if (sp->role.direct && !kvm_is_reserved_pfn(pfn) &&
-		    !kvm_is_zone_device_pfn(pfn) &&
-		    PageTransCompoundMap(pfn_to_page(pfn))) {
+		    (kvm_is_zone_device_pfn(pfn) ||
+		     PageCompound(pfn_to_page(pfn)))) {
 			pte_list_remove(rmap_head, sptep);
 
 			if (kvm_available_flush_tlb_with_range())
@@ -6249,7 +6149,7 @@ static void kvm_set_mmio_spte_mask(void)
 	 * If reserved bit is not supported, clear the present bit to disable
 	 * mmio page fault.
 	 */
-	if (IS_ENABLED(CONFIG_X86_64) && shadow_phys_bits == 52)
+	if (shadow_phys_bits == 52)
 		mask &= ~1ull;
 
 	kvm_mmu_set_mmio_spte_mask(mask, mask, ACC_WRITE_MASK | ACC_USER_MASK);
diff --git a/arch/x86/kvm/mmu/paging_tmpl.h b/arch/x86/kvm/mmu/paging_tmpl.h
index 97b21e7fd013..4e1ef0473663 100644
--- a/arch/x86/kvm/mmu/paging_tmpl.h
+++ b/arch/x86/kvm/mmu/paging_tmpl.h
@@ -128,6 +128,21 @@ static inline int FNAME(is_present_gpte)(unsigned long pte)
 #endif
 }
 
+static bool FNAME(is_bad_mt_xwr)(struct rsvd_bits_validate *rsvd_check, u64 gpte)
+{
+#if PTTYPE != PTTYPE_EPT
+	return false;
+#else
+	return __is_bad_mt_xwr(rsvd_check, gpte);
+#endif
+}
+
+static bool FNAME(is_rsvd_bits_set)(struct kvm_mmu *mmu, u64 gpte, int level)
+{
+	return __is_rsvd_bits_set(&mmu->guest_rsvd_check, gpte, level) ||
+	       FNAME(is_bad_mt_xwr)(&mmu->guest_rsvd_check, gpte);
+}
+
 static int FNAME(cmpxchg_gpte)(struct kvm_vcpu *vcpu, struct kvm_mmu *mmu,
 			       pt_element_t __user *ptep_user, unsigned index,
 			       pt_element_t orig_pte, pt_element_t new_pte)
@@ -175,9 +190,6 @@ static bool FNAME(prefetch_invalid_gpte)(struct kvm_vcpu *vcpu,
 				  struct kvm_mmu_page *sp, u64 *spte,
 				  u64 gpte)
 {
-	if (is_rsvd_bits_set(vcpu->arch.mmu, gpte, PT_PAGE_TABLE_LEVEL))
-		goto no_present;
-
 	if (!FNAME(is_present_gpte)(gpte))
 		goto no_present;
 
@@ -186,6 +198,9 @@ static bool FNAME(prefetch_invalid_gpte)(struct kvm_vcpu *vcpu,
 	    !(gpte & PT_GUEST_ACCESSED_MASK))
 		goto no_present;
 
+	if (FNAME(is_rsvd_bits_set)(vcpu->arch.mmu, gpte, PT_PAGE_TABLE_LEVEL))
+		goto no_present;
+
 	return false;
 
 no_present:
@@ -291,11 +306,11 @@ static inline unsigned FNAME(gpte_pkeys)(struct kvm_vcpu *vcpu, u64 gpte)
 }
 
 /*
- * Fetch a guest pte for a guest virtual address
+ * Fetch a guest pte for a guest virtual address, or for an L2's GPA.
  */
 static int FNAME(walk_addr_generic)(struct guest_walker *walker,
 				    struct kvm_vcpu *vcpu, struct kvm_mmu *mmu,
-				    gva_t addr, u32 access)
+				    gpa_t addr, u32 access)
 {
 	int ret;
 	pt_element_t pte;
@@ -400,7 +415,7 @@ retry_walk:
 		if (unlikely(!FNAME(is_present_gpte)(pte)))
 			goto error;
 
-		if (unlikely(is_rsvd_bits_set(mmu, pte, walker->level))) {
+		if (unlikely(FNAME(is_rsvd_bits_set)(mmu, pte, walker->level))) {
 			errcode = PFERR_RSVD_MASK | PFERR_PRESENT_MASK;
 			goto error;
 		}
@@ -496,7 +511,7 @@ error:
 }
 
 static int FNAME(walk_addr)(struct guest_walker *walker,
-			    struct kvm_vcpu *vcpu, gva_t addr, u32 access)
+			    struct kvm_vcpu *vcpu, gpa_t addr, u32 access)
 {
 	return FNAME(walk_addr_generic)(walker, vcpu, vcpu->arch.mmu, addr,
 					access);
@@ -611,17 +626,17 @@ static void FNAME(pte_prefetch)(struct kvm_vcpu *vcpu, struct guest_walker *gw,
  * If the guest tries to write a write-protected page, we need to
  * emulate this operation, return 1 to indicate this case.
  */
-static int FNAME(fetch)(struct kvm_vcpu *vcpu, gva_t addr,
+static int FNAME(fetch)(struct kvm_vcpu *vcpu, gpa_t addr,
 			 struct guest_walker *gw,
-			 int write_fault, int hlevel,
+			 int write_fault, int max_level,
 			 kvm_pfn_t pfn, bool map_writable, bool prefault,
 			 bool lpage_disallowed)
 {
 	struct kvm_mmu_page *sp = NULL;
 	struct kvm_shadow_walk_iterator it;
 	unsigned direct_access, access = gw->pt_access;
-	int top_level, ret;
-	gfn_t gfn, base_gfn;
+	int top_level, hlevel, ret;
+	gfn_t base_gfn = gw->gfn;
 
 	direct_access = gw->pte_access;
 
@@ -637,7 +652,7 @@ static int FNAME(fetch)(struct kvm_vcpu *vcpu, gva_t addr,
 	if (FNAME(gpte_changed)(vcpu, gw, top_level))
 		goto out_gpte_changed;
 
-	if (!VALID_PAGE(vcpu->arch.mmu->root_hpa))
+	if (WARN_ON(!VALID_PAGE(vcpu->arch.mmu->root_hpa)))
 		goto out_gpte_changed;
 
 	for (shadow_walk_init(&it, vcpu, addr);
@@ -666,12 +681,7 @@ static int FNAME(fetch)(struct kvm_vcpu *vcpu, gva_t addr,
 			link_shadow_page(vcpu, it.sptep, sp);
 	}
 
-	/*
-	 * FNAME(page_fault) might have clobbered the bottom bits of
-	 * gw->gfn, restore them from the virtual address.
-	 */
-	gfn = gw->gfn | ((addr & PT_LVL_OFFSET_MASK(gw->level)) >> PAGE_SHIFT);
-	base_gfn = gfn;
+	hlevel = kvm_mmu_hugepage_adjust(vcpu, gw->gfn, max_level, &pfn);
 
 	trace_kvm_mmu_spte_requested(addr, gw->level, pfn);
 
@@ -682,9 +692,9 @@ static int FNAME(fetch)(struct kvm_vcpu *vcpu, gva_t addr,
 		 * We cannot overwrite existing page tables with an NX
 		 * large page, as the leaf could be executable.
 		 */
-		disallowed_hugepage_adjust(it, gfn, &pfn, &hlevel);
+		disallowed_hugepage_adjust(it, gw->gfn, &pfn, &hlevel);
 
-		base_gfn = gfn & ~(KVM_PAGES_PER_HPAGE(it.level) - 1);
+		base_gfn = gw->gfn & ~(KVM_PAGES_PER_HPAGE(it.level) - 1);
 		if (it.level == hlevel)
 			break;
 
@@ -765,7 +775,7 @@ FNAME(is_self_change_mapping)(struct kvm_vcpu *vcpu,
  *  Returns: 1 if we need to emulate the instruction, 0 otherwise, or
  *           a negative value on error.
  */
-static int FNAME(page_fault)(struct kvm_vcpu *vcpu, gva_t addr, u32 error_code,
+static int FNAME(page_fault)(struct kvm_vcpu *vcpu, gpa_t addr, u32 error_code,
 			     bool prefault)
 {
 	int write_fault = error_code & PFERR_WRITE_MASK;
@@ -773,12 +783,11 @@ static int FNAME(page_fault)(struct kvm_vcpu *vcpu, gva_t addr, u32 error_code,
 	struct guest_walker walker;
 	int r;
 	kvm_pfn_t pfn;
-	int level = PT_PAGE_TABLE_LEVEL;
 	unsigned long mmu_seq;
 	bool map_writable, is_self_change_mapping;
 	bool lpage_disallowed = (error_code & PFERR_FETCH_MASK) &&
 				is_nx_huge_page_enabled();
-	bool force_pt_level = lpage_disallowed;
+	int max_level;
 
 	pgprintk("%s: addr %lx err %x\n", __func__, addr, error_code);
 
@@ -818,14 +827,10 @@ static int FNAME(page_fault)(struct kvm_vcpu *vcpu, gva_t addr, u32 error_code,
 	is_self_change_mapping = FNAME(is_self_change_mapping)(vcpu,
 	      &walker, user_fault, &vcpu->arch.write_fault_to_shadow_pgtable);
 
-	if (walker.level >= PT_DIRECTORY_LEVEL && !is_self_change_mapping) {
-		level = mapping_level(vcpu, walker.gfn, &force_pt_level);
-		if (likely(!force_pt_level)) {
-			level = min(walker.level, level);
-			walker.gfn = walker.gfn & ~(KVM_PAGES_PER_HPAGE(level) - 1);
-		}
-	} else
-		force_pt_level = true;
+	if (lpage_disallowed || is_self_change_mapping)
+		max_level = PT_PAGE_TABLE_LEVEL;
+	else
+		max_level = walker.level;
 
 	mmu_seq = vcpu->kvm->mmu_notifier_seq;
 	smp_rmb();
@@ -865,10 +870,8 @@ static int FNAME(page_fault)(struct kvm_vcpu *vcpu, gva_t addr, u32 error_code,
 	kvm_mmu_audit(vcpu, AUDIT_PRE_PAGE_FAULT);
 	if (make_mmu_pages_available(vcpu) < 0)
 		goto out_unlock;
-	if (!force_pt_level)
-		transparent_hugepage_adjust(vcpu, walker.gfn, &pfn, &level);
-	r = FNAME(fetch)(vcpu, addr, &walker, write_fault,
-			 level, pfn, map_writable, prefault, lpage_disallowed);
+	r = FNAME(fetch)(vcpu, addr, &walker, write_fault, max_level, pfn,
+			 map_writable, prefault, lpage_disallowed);
 	kvm_mmu_audit(vcpu, AUDIT_POST_PAGE_FAULT);
 
 out_unlock:
@@ -945,18 +948,19 @@ static void FNAME(invlpg)(struct kvm_vcpu *vcpu, gva_t gva, hpa_t root_hpa)
 	spin_unlock(&vcpu->kvm->mmu_lock);
 }
 
-static gpa_t FNAME(gva_to_gpa)(struct kvm_vcpu *vcpu, gva_t vaddr, u32 access,
+/* Note, @addr is a GPA when gva_to_gpa() translates an L2 GPA to an L1 GPA. */
+static gpa_t FNAME(gva_to_gpa)(struct kvm_vcpu *vcpu, gpa_t addr, u32 access,
 			       struct x86_exception *exception)
 {
 	struct guest_walker walker;
 	gpa_t gpa = UNMAPPED_GVA;
 	int r;
 
-	r = FNAME(walk_addr)(&walker, vcpu, vaddr, access);
+	r = FNAME(walk_addr)(&walker, vcpu, addr, access);
 
 	if (r) {
 		gpa = gfn_to_gpa(walker.gfn);
-		gpa |= vaddr & ~PAGE_MASK;
+		gpa |= addr & ~PAGE_MASK;
 	} else if (exception)
 		*exception = walker.fault;
 
@@ -964,7 +968,8 @@ static gpa_t FNAME(gva_to_gpa)(struct kvm_vcpu *vcpu, gva_t vaddr, u32 access,
 }
 
 #if PTTYPE != PTTYPE_EPT
-static gpa_t FNAME(gva_to_gpa_nested)(struct kvm_vcpu *vcpu, gva_t vaddr,
+/* Note, gva_to_gpa_nested() is only used to translate L2 GVAs. */
+static gpa_t FNAME(gva_to_gpa_nested)(struct kvm_vcpu *vcpu, gpa_t vaddr,
 				      u32 access,
 				      struct x86_exception *exception)
 {
@@ -972,6 +977,11 @@ static gpa_t FNAME(gva_to_gpa_nested)(struct kvm_vcpu *vcpu, gva_t vaddr,
 	gpa_t gpa = UNMAPPED_GVA;
 	int r;
 
+#ifndef CONFIG_X86_64
+	/* A 64-bit GVA should be impossible on 32-bit KVM. */
+	WARN_ON_ONCE(vaddr >> 32);
+#endif
+
 	r = FNAME(walk_addr_nested)(&walker, vcpu, vaddr, access);
 
 	if (r) {
diff --git a/arch/x86/kvm/mmutrace.h b/arch/x86/kvm/mmutrace.h
index 7ca8831c7d1a..3c6522b84ff1 100644
--- a/arch/x86/kvm/mmutrace.h
+++ b/arch/x86/kvm/mmutrace.h
@@ -249,13 +249,13 @@ TRACE_EVENT(
 
 TRACE_EVENT(
 	fast_page_fault,
-	TP_PROTO(struct kvm_vcpu *vcpu, gva_t gva, u32 error_code,
+	TP_PROTO(struct kvm_vcpu *vcpu, gpa_t cr2_or_gpa, u32 error_code,
 		 u64 *sptep, u64 old_spte, bool retry),
-	TP_ARGS(vcpu, gva, error_code, sptep, old_spte, retry),
+	TP_ARGS(vcpu, cr2_or_gpa, error_code, sptep, old_spte, retry),
 
 	TP_STRUCT__entry(
 		__field(int, vcpu_id)
-		__field(gva_t, gva)
+		__field(gpa_t, cr2_or_gpa)
 		__field(u32, error_code)
 		__field(u64 *, sptep)
 		__field(u64, old_spte)
@@ -265,7 +265,7 @@ TRACE_EVENT(
 
 	TP_fast_assign(
 		__entry->vcpu_id = vcpu->vcpu_id;
-		__entry->gva = gva;
+		__entry->cr2_or_gpa = cr2_or_gpa;
 		__entry->error_code = error_code;
 		__entry->sptep = sptep;
 		__entry->old_spte = old_spte;
@@ -273,9 +273,9 @@ TRACE_EVENT(
 		__entry->retry = retry;
 	),
 
-	TP_printk("vcpu %d gva %lx error_code %s sptep %p old %#llx"
+	TP_printk("vcpu %d gva %llx error_code %s sptep %p old %#llx"
 		  " new %llx spurious %d fixed %d", __entry->vcpu_id,
-		  __entry->gva, __print_flags(__entry->error_code, "|",
+		  __entry->cr2_or_gpa, __print_flags(__entry->error_code, "|",
 		  kvm_mmu_trace_pferr_flags), __entry->sptep,
 		  __entry->old_spte, __entry->new_spte,
 		  __spte_satisfied(old_spte), __spte_satisfied(new_spte)
diff --git a/arch/x86/kvm/mtrr.c b/arch/x86/kvm/mtrr.c
index 25ce3edd1872..7f0059aa30e1 100644
--- a/arch/x86/kvm/mtrr.c
+++ b/arch/x86/kvm/mtrr.c
@@ -192,11 +192,15 @@ static bool fixed_msr_to_seg_unit(u32 msr, int *seg, int *unit)
 		break;
 	case MSR_MTRRfix16K_80000 ... MSR_MTRRfix16K_A0000:
 		*seg = 1;
-		*unit = msr - MSR_MTRRfix16K_80000;
+		*unit = array_index_nospec(
+			msr - MSR_MTRRfix16K_80000,
+			MSR_MTRRfix16K_A0000 - MSR_MTRRfix16K_80000 + 1);
 		break;
 	case MSR_MTRRfix4K_C0000 ... MSR_MTRRfix4K_F8000:
 		*seg = 2;
-		*unit = msr - MSR_MTRRfix4K_C0000;
+		*unit = array_index_nospec(
+			msr - MSR_MTRRfix4K_C0000,
+			MSR_MTRRfix4K_F8000 - MSR_MTRRfix4K_C0000 + 1);
 		break;
 	default:
 		return false;
diff --git a/arch/x86/kvm/pmu.h b/arch/x86/kvm/pmu.h
index 7ebb62326c14..13332984b6d5 100644
--- a/arch/x86/kvm/pmu.h
+++ b/arch/x86/kvm/pmu.h
@@ -2,6 +2,8 @@
 #ifndef __KVM_X86_PMU_H
 #define __KVM_X86_PMU_H
 
+#include <linux/nospec.h>
+
 #define vcpu_to_pmu(vcpu) (&(vcpu)->arch.pmu)
 #define pmu_to_vcpu(pmu)  (container_of((pmu), struct kvm_vcpu, arch.pmu))
 #define pmc_to_pmu(pmc)   (&(pmc)->vcpu->arch.pmu)
@@ -102,8 +104,12 @@ static inline bool kvm_valid_perf_global_ctrl(struct kvm_pmu *pmu,
 static inline struct kvm_pmc *get_gp_pmc(struct kvm_pmu *pmu, u32 msr,
 					 u32 base)
 {
-	if (msr >= base && msr < base + pmu->nr_arch_gp_counters)
-		return &pmu->gp_counters[msr - base];
+	if (msr >= base && msr < base + pmu->nr_arch_gp_counters) {
+		u32 index = array_index_nospec(msr - base,
+					       pmu->nr_arch_gp_counters);
+
+		return &pmu->gp_counters[index];
+	}
 
 	return NULL;
 }
@@ -113,8 +119,12 @@ static inline struct kvm_pmc *get_fixed_pmc(struct kvm_pmu *pmu, u32 msr)
 {
 	int base = MSR_CORE_PERF_FIXED_CTR0;
 
-	if (msr >= base && msr < base + pmu->nr_arch_fixed_counters)
-		return &pmu->fixed_counters[msr - base];
+	if (msr >= base && msr < base + pmu->nr_arch_fixed_counters) {
+		u32 index = array_index_nospec(msr - base,
+					       pmu->nr_arch_fixed_counters);
+
+		return &pmu->fixed_counters[index];
+	}
 
 	return NULL;
 }
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 122d4ce3b1ab..a3e32d61d60c 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -387,6 +387,8 @@ static u8 rsm_ins_bytes[] = "\x0f\xaa";
 static void svm_set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0);
 static void svm_flush_tlb(struct kvm_vcpu *vcpu, bool invalidate_gpa);
 static void svm_complete_interrupts(struct vcpu_svm *svm);
+static void svm_toggle_avic_for_irq_window(struct kvm_vcpu *vcpu, bool activate);
+static inline void avic_post_state_restore(struct kvm_vcpu *vcpu);
 
 static int nested_svm_exit_handled(struct vcpu_svm *svm);
 static int nested_svm_intercept(struct vcpu_svm *svm);
@@ -1307,6 +1309,47 @@ static void shrink_ple_window(struct kvm_vcpu *vcpu)
 	}
 }
 
+/*
+ * The default MMIO mask is a single bit (excluding the present bit),
+ * which could conflict with the memory encryption bit. Check for
+ * memory encryption support and override the default MMIO mask if
+ * memory encryption is enabled.
+ */
+static __init void svm_adjust_mmio_mask(void)
+{
+	unsigned int enc_bit, mask_bit;
+	u64 msr, mask;
+
+	/* If there is no memory encryption support, use existing mask */
+	if (cpuid_eax(0x80000000) < 0x8000001f)
+		return;
+
+	/* If memory encryption is not enabled, use existing mask */
+	rdmsrl(MSR_K8_SYSCFG, msr);
+	if (!(msr & MSR_K8_SYSCFG_MEM_ENCRYPT))
+		return;
+
+	enc_bit = cpuid_ebx(0x8000001f) & 0x3f;
+	mask_bit = boot_cpu_data.x86_phys_bits;
+
+	/* Increment the mask bit if it is the same as the encryption bit */
+	if (enc_bit == mask_bit)
+		mask_bit++;
+
+	/*
+	 * If the mask bit location is below 52, then some bits above the
+	 * physical addressing limit will always be reserved, so use the
+	 * rsvd_bits() function to generate the mask. This mask, along with
+	 * the present bit, will be used to generate a page fault with
+	 * PFER.RSV = 1.
+	 *
+	 * If the mask bit location is 52 (or above), then clear the mask.
+	 */
+	mask = (mask_bit < 52) ? rsvd_bits(mask_bit, 51) | PT_PRESENT_MASK : 0;
+
+	kvm_mmu_set_mmio_spte_mask(mask, mask, PT_WRITABLE_MASK | PT_USER_MASK);
+}
+
 static __init int svm_hardware_setup(void)
 {
 	int cpu;
@@ -1361,6 +1404,8 @@ static __init int svm_hardware_setup(void)
 		}
 	}
 
+	svm_adjust_mmio_mask();
+
 	for_each_possible_cpu(cpu) {
 		r = svm_cpu_init(cpu);
 		if (r)
@@ -1502,7 +1547,10 @@ static void avic_init_vmcb(struct vcpu_svm *svm)
 	vmcb->control.avic_logical_id = lpa & AVIC_HPA_MASK;
 	vmcb->control.avic_physical_id = ppa & AVIC_HPA_MASK;
 	vmcb->control.avic_physical_id |= AVIC_MAX_PHYSICAL_ID_COUNT;
-	vmcb->control.int_ctl |= AVIC_ENABLE_MASK;
+	if (kvm_apicv_activated(svm->vcpu.kvm))
+		vmcb->control.int_ctl |= AVIC_ENABLE_MASK;
+	else
+		vmcb->control.int_ctl &= ~AVIC_ENABLE_MASK;
 }
 
 static void init_vmcb(struct vcpu_svm *svm)
@@ -1686,23 +1734,28 @@ static u64 *avic_get_physical_id_entry(struct kvm_vcpu *vcpu,
  * field of the VMCB. Therefore, we set up the
  * APIC_ACCESS_PAGE_PRIVATE_MEMSLOT (4KB) here.
  */
-static int avic_init_access_page(struct kvm_vcpu *vcpu)
+static int avic_update_access_page(struct kvm *kvm, bool activate)
 {
-	struct kvm *kvm = vcpu->kvm;
 	int ret = 0;
 
 	mutex_lock(&kvm->slots_lock);
-	if (kvm->arch.apic_access_page_done)
+	/*
+	 * During kvm_destroy_vm(), kvm_pit_set_reinject() could trigger
+	 * APICv mode change, which update APIC_ACCESS_PAGE_PRIVATE_MEMSLOT
+	 * memory region. So, we need to ensure that kvm->mm == current->mm.
+	 */
+	if ((kvm->arch.apic_access_page_done == activate) ||
+	    (kvm->mm != current->mm))
 		goto out;
 
 	ret = __x86_set_memory_region(kvm,
 				      APIC_ACCESS_PAGE_PRIVATE_MEMSLOT,
 				      APIC_DEFAULT_PHYS_BASE,
-				      PAGE_SIZE);
+				      activate ? PAGE_SIZE : 0);
 	if (ret)
 		goto out;
 
-	kvm->arch.apic_access_page_done = true;
+	kvm->arch.apic_access_page_done = activate;
 out:
 	mutex_unlock(&kvm->slots_lock);
 	return ret;
@@ -1710,21 +1763,24 @@ out:
 
 static int avic_init_backing_page(struct kvm_vcpu *vcpu)
 {
-	int ret;
 	u64 *entry, new_entry;
 	int id = vcpu->vcpu_id;
 	struct vcpu_svm *svm = to_svm(vcpu);
 
-	ret = avic_init_access_page(vcpu);
-	if (ret)
-		return ret;
-
 	if (id >= AVIC_MAX_PHYSICAL_ID_COUNT)
 		return -EINVAL;
 
 	if (!svm->vcpu.arch.apic->regs)
 		return -EINVAL;
 
+	if (kvm_apicv_activated(vcpu->kvm)) {
+		int ret;
+
+		ret = avic_update_access_page(vcpu->kvm, true);
+		if (ret)
+			return ret;
+	}
+
 	svm->avic_backing_page = virt_to_page(svm->vcpu.arch.apic->regs);
 
 	/* Setting AVIC backing page address in the phy APIC ID table */
@@ -2009,6 +2065,18 @@ free_avic:
 	return err;
 }
 
+static int svm_vm_init(struct kvm *kvm)
+{
+	if (avic) {
+		int ret = avic_vm_init(kvm);
+		if (ret)
+			return ret;
+	}
+
+	kvm_apicv_init(kvm, avic);
+	return 0;
+}
+
 static inline int
 avic_update_iommu_vcpu_affinity(struct kvm_vcpu *vcpu, int cpu, bool r)
 {
@@ -2144,7 +2212,7 @@ static int avic_init_vcpu(struct vcpu_svm *svm)
 	return ret;
 }
 
-static struct kvm_vcpu *svm_create_vcpu(struct kvm *kvm, unsigned int id)
+static int svm_create_vcpu(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_svm *svm;
 	struct page *page;
@@ -2153,39 +2221,13 @@ static struct kvm_vcpu *svm_create_vcpu(struct kvm *kvm, unsigned int id)
 	struct page *nested_msrpm_pages;
 	int err;
 
-	BUILD_BUG_ON_MSG(offsetof(struct vcpu_svm, vcpu) != 0,
-		"struct kvm_vcpu must be at offset 0 for arch usercopy region");
-
-	svm = kmem_cache_zalloc(kvm_vcpu_cache, GFP_KERNEL_ACCOUNT);
-	if (!svm) {
-		err = -ENOMEM;
-		goto out;
-	}
-
-	svm->vcpu.arch.user_fpu = kmem_cache_zalloc(x86_fpu_cache,
-						     GFP_KERNEL_ACCOUNT);
-	if (!svm->vcpu.arch.user_fpu) {
-		printk(KERN_ERR "kvm: failed to allocate kvm userspace's fpu\n");
-		err = -ENOMEM;
-		goto free_partial_svm;
-	}
-
-	svm->vcpu.arch.guest_fpu = kmem_cache_zalloc(x86_fpu_cache,
-						     GFP_KERNEL_ACCOUNT);
-	if (!svm->vcpu.arch.guest_fpu) {
-		printk(KERN_ERR "kvm: failed to allocate vcpu's fpu\n");
-		err = -ENOMEM;
-		goto free_user_fpu;
-	}
-
-	err = kvm_vcpu_init(&svm->vcpu, kvm, id);
-	if (err)
-		goto free_svm;
+	BUILD_BUG_ON(offsetof(struct vcpu_svm, vcpu) != 0);
+	svm = to_svm(vcpu);
 
 	err = -ENOMEM;
 	page = alloc_page(GFP_KERNEL_ACCOUNT);
 	if (!page)
-		goto uninit;
+		goto out;
 
 	msrpm_pages = alloc_pages(GFP_KERNEL_ACCOUNT, MSRPM_ALLOC_ORDER);
 	if (!msrpm_pages)
@@ -2206,7 +2248,8 @@ static struct kvm_vcpu *svm_create_vcpu(struct kvm *kvm, unsigned int id)
 	/* We initialize this flag to true to make sure that the is_running
 	 * bit would be set the first time the vcpu is loaded.
 	 */
-	svm->avic_is_running = true;
+	if (irqchip_in_kernel(vcpu->kvm) && kvm_apicv_activated(vcpu->kvm))
+		svm->avic_is_running = true;
 
 	svm->nested.hsave = page_address(hsave_page);
 
@@ -2222,9 +2265,9 @@ static struct kvm_vcpu *svm_create_vcpu(struct kvm *kvm, unsigned int id)
 	svm->asid_generation = 0;
 	init_vmcb(svm);
 
-	svm_init_osvw(&svm->vcpu);
+	svm_init_osvw(vcpu);
 
-	return &svm->vcpu;
+	return 0;
 
 free_page4:
 	__free_page(hsave_page);
@@ -2234,16 +2277,8 @@ free_page2:
 	__free_pages(msrpm_pages, MSRPM_ALLOC_ORDER);
 free_page1:
 	__free_page(page);
-uninit:
-	kvm_vcpu_uninit(&svm->vcpu);
-free_svm:
-	kmem_cache_free(x86_fpu_cache, svm->vcpu.arch.guest_fpu);
-free_user_fpu:
-	kmem_cache_free(x86_fpu_cache, svm->vcpu.arch.user_fpu);
-free_partial_svm:
-	kmem_cache_free(kvm_vcpu_cache, svm);
 out:
-	return ERR_PTR(err);
+	return err;
 }
 
 static void svm_clear_current_vmcb(struct vmcb *vmcb)
@@ -2269,10 +2304,6 @@ static void svm_free_vcpu(struct kvm_vcpu *vcpu)
 	__free_pages(virt_to_page(svm->msrpm), MSRPM_ALLOC_ORDER);
 	__free_page(virt_to_page(svm->nested.hsave));
 	__free_pages(virt_to_page(svm->nested.msrpm), MSRPM_ALLOC_ORDER);
-	kvm_vcpu_uninit(vcpu);
-	kmem_cache_free(x86_fpu_cache, svm->vcpu.arch.user_fpu);
-	kmem_cache_free(x86_fpu_cache, svm->vcpu.arch.guest_fpu);
-	kmem_cache_free(kvm_vcpu_cache, svm);
 }
 
 static void svm_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
@@ -2343,6 +2374,8 @@ static void svm_vcpu_blocking(struct kvm_vcpu *vcpu)
 
 static void svm_vcpu_unblocking(struct kvm_vcpu *vcpu)
 {
+	if (kvm_check_request(KVM_REQ_APICV_UPDATE, vcpu))
+		kvm_vcpu_update_apicv(vcpu);
 	avic_set_running(vcpu, true);
 }
 
@@ -4192,6 +4225,8 @@ static int svm_get_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 		break;
 	case MSR_IA32_SPEC_CTRL:
 		if (!msr_info->host_initiated &&
+		    !guest_cpuid_has(vcpu, X86_FEATURE_SPEC_CTRL) &&
+		    !guest_cpuid_has(vcpu, X86_FEATURE_AMD_STIBP) &&
 		    !guest_cpuid_has(vcpu, X86_FEATURE_AMD_IBRS) &&
 		    !guest_cpuid_has(vcpu, X86_FEATURE_AMD_SSBD))
 			return 1;
@@ -4277,16 +4312,16 @@ static int svm_set_msr(struct kvm_vcpu *vcpu, struct msr_data *msr)
 		break;
 	case MSR_IA32_SPEC_CTRL:
 		if (!msr->host_initiated &&
+		    !guest_cpuid_has(vcpu, X86_FEATURE_SPEC_CTRL) &&
+		    !guest_cpuid_has(vcpu, X86_FEATURE_AMD_STIBP) &&
 		    !guest_cpuid_has(vcpu, X86_FEATURE_AMD_IBRS) &&
 		    !guest_cpuid_has(vcpu, X86_FEATURE_AMD_SSBD))
 			return 1;
 
-		/* The STIBP bit doesn't fault even if it's not advertised */
-		if (data & ~(SPEC_CTRL_IBRS | SPEC_CTRL_STIBP | SPEC_CTRL_SSBD))
+		if (data & ~kvm_spec_ctrl_valid_bits(vcpu))
 			return 1;
 
 		svm->spec_ctrl = data;
-
 		if (!data)
 			break;
 
@@ -4310,13 +4345,12 @@ static int svm_set_msr(struct kvm_vcpu *vcpu, struct msr_data *msr)
 
 		if (data & ~PRED_CMD_IBPB)
 			return 1;
-
+		if (!boot_cpu_has(X86_FEATURE_AMD_IBPB))
+			return 1;
 		if (!data)
 			break;
 
 		wrmsrl(MSR_IA32_PRED_CMD, PRED_CMD_IBPB);
-		if (is_guest_mode(vcpu))
-			break;
 		set_msr_interception(svm->msrpm, MSR_IA32_PRED_CMD, 0, 1);
 		break;
 	case MSR_AMD64_VIRT_SPEC_CTRL:
@@ -4438,6 +4472,14 @@ static int interrupt_window_interception(struct vcpu_svm *svm)
 {
 	kvm_make_request(KVM_REQ_EVENT, &svm->vcpu);
 	svm_clear_vintr(svm);
+
+	/*
+	 * For AVIC, the only reason to end up here is ExtINTs.
+	 * In this case AVIC was temporarily disabled for
+	 * requesting the IRQ window and we have to re-enable it.
+	 */
+	svm_toggle_avic_for_irq_window(&svm->vcpu, true);
+
 	svm->vmcb->control.int_ctl &= ~V_IRQ_MASK;
 	mark_dirty(svm->vmcb, VMCB_INTR);
 	++svm->vcpu.stat.irq_window_exits;
@@ -4519,9 +4561,9 @@ static int avic_incomplete_ipi_interception(struct vcpu_svm *svm)
 		 */
 		kvm_for_each_vcpu(i, vcpu, kvm) {
 			bool m = kvm_apic_match_dest(vcpu, apic,
-						     icrl & KVM_APIC_SHORT_MASK,
+						     icrl & APIC_SHORT_MASK,
 						     GET_APIC_DEST_FIELD(icrh),
-						     icrl & KVM_APIC_DEST_MASK);
+						     icrl & APIC_DEST_MASK);
 
 			if (m && !avic_vcpu_is_running(vcpu))
 				kvm_vcpu_wake_up(vcpu);
@@ -4935,7 +4977,8 @@ static void svm_get_exit_info(struct kvm_vcpu *vcpu, u64 *info1, u64 *info2)
 	*info2 = control->exit_info_2;
 }
 
-static int handle_exit(struct kvm_vcpu *vcpu)
+static int handle_exit(struct kvm_vcpu *vcpu,
+	enum exit_fastpath_completion exit_fastpath)
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
 	struct kvm_run *kvm_run = vcpu->run;
@@ -4993,7 +5036,10 @@ static int handle_exit(struct kvm_vcpu *vcpu)
 		       __func__, svm->vmcb->control.exit_int_info,
 		       exit_code);
 
-	if (exit_code >= ARRAY_SIZE(svm_exit_handlers)
+	if (exit_fastpath == EXIT_FASTPATH_SKIP_EMUL_INS) {
+		kvm_skip_emulated_instruction(vcpu);
+		return 1;
+	} else if (exit_code >= ARRAY_SIZE(svm_exit_handlers)
 	    || !svm_exit_handlers[exit_code]) {
 		vcpu_unimpl(vcpu, "svm: unexpected exit reason 0x%x\n", exit_code);
 		dump_vmcb(vcpu);
@@ -5129,30 +5175,79 @@ static void svm_set_virtual_apic_mode(struct kvm_vcpu *vcpu)
 	return;
 }
 
-static bool svm_get_enable_apicv(struct kvm *kvm)
+static void svm_hwapic_irr_update(struct kvm_vcpu *vcpu, int max_irr)
 {
-	return avic && irqchip_split(kvm);
 }
 
-static void svm_hwapic_irr_update(struct kvm_vcpu *vcpu, int max_irr)
+static void svm_hwapic_isr_update(struct kvm_vcpu *vcpu, int max_isr)
 {
 }
 
-static void svm_hwapic_isr_update(struct kvm_vcpu *vcpu, int max_isr)
+static void svm_toggle_avic_for_irq_window(struct kvm_vcpu *vcpu, bool activate)
 {
+	if (!avic || !lapic_in_kernel(vcpu))
+		return;
+
+	srcu_read_unlock(&vcpu->kvm->srcu, vcpu->srcu_idx);
+	kvm_request_apicv_update(vcpu->kvm, activate,
+				 APICV_INHIBIT_REASON_IRQWIN);
+	vcpu->srcu_idx = srcu_read_lock(&vcpu->kvm->srcu);
+}
+
+static int svm_set_pi_irte_mode(struct kvm_vcpu *vcpu, bool activate)
+{
+	int ret = 0;
+	unsigned long flags;
+	struct amd_svm_iommu_ir *ir;
+	struct vcpu_svm *svm = to_svm(vcpu);
+
+	if (!kvm_arch_has_assigned_device(vcpu->kvm))
+		return 0;
+
+	/*
+	 * Here, we go through the per-vcpu ir_list to update all existing
+	 * interrupt remapping table entry targeting this vcpu.
+	 */
+	spin_lock_irqsave(&svm->ir_list_lock, flags);
+
+	if (list_empty(&svm->ir_list))
+		goto out;
+
+	list_for_each_entry(ir, &svm->ir_list, node) {
+		if (activate)
+			ret = amd_iommu_activate_guest_mode(ir->data);
+		else
+			ret = amd_iommu_deactivate_guest_mode(ir->data);
+		if (ret)
+			break;
+	}
+out:
+	spin_unlock_irqrestore(&svm->ir_list_lock, flags);
+	return ret;
 }
 
-/* Note: Currently only used by Hyper-V. */
 static void svm_refresh_apicv_exec_ctrl(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
 	struct vmcb *vmcb = svm->vmcb;
+	bool activated = kvm_vcpu_apicv_active(vcpu);
 
-	if (kvm_vcpu_apicv_active(vcpu))
+	if (activated) {
+		/**
+		 * During AVIC temporary deactivation, guest could update
+		 * APIC ID, DFR and LDR registers, which would not be trapped
+		 * by avic_unaccelerated_access_interception(). In this case,
+		 * we need to check and update the AVIC logical APIC ID table
+		 * accordingly before re-activating.
+		 */
+		avic_post_state_restore(vcpu);
 		vmcb->control.int_ctl |= AVIC_ENABLE_MASK;
-	else
+	} else {
 		vmcb->control.int_ctl &= ~AVIC_ENABLE_MASK;
+	}
 	mark_dirty(vmcb, VMCB_AVIC);
+
+	svm_set_pi_irte_mode(vcpu, activated);
 }
 
 static void svm_load_eoi_exitmap(struct kvm_vcpu *vcpu, u64 *eoi_exit_bitmap)
@@ -5439,9 +5534,6 @@ static void enable_irq_window(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
 
-	if (kvm_vcpu_apicv_active(vcpu))
-		return;
-
 	/*
 	 * In case GIF=0 we can't rely on the CPU to tell us when GIF becomes
 	 * 1, because that's a separate STGI/VMRUN intercept.  The next time we
@@ -5451,6 +5543,13 @@ static void enable_irq_window(struct kvm_vcpu *vcpu)
 	 * window under the assumption that the hardware will set the GIF.
 	 */
 	if ((vgif_enabled(svm) || gif_set(svm)) && nested_svm_intr(svm)) {
+		/*
+		 * IRQ window is not needed when AVIC is enabled,
+		 * unless we have pending ExtINT since it cannot be injected
+		 * via AVIC. In such case, we need to temporarily disable AVIC,
+		 * and fallback to injecting IRQ via V_IRQ.
+		 */
+		svm_toggle_avic_for_irq_window(vcpu, false);
 		svm_set_vintr(svm);
 		svm_inject_irq(svm, 0x0);
 	}
@@ -5913,6 +6012,7 @@ static void svm_cpuid_update(struct kvm_vcpu *vcpu)
 	struct vcpu_svm *svm = to_svm(vcpu);
 
 	vcpu->arch.xsaves_enabled = guest_cpuid_has(vcpu, X86_FEATURE_XSAVE) &&
+				    boot_cpu_has(X86_FEATURE_XSAVE) &&
 				    boot_cpu_has(X86_FEATURE_XSAVES);
 
 	/* Update nrips enabled cache */
@@ -5922,16 +6022,24 @@ static void svm_cpuid_update(struct kvm_vcpu *vcpu)
 		return;
 
 	guest_cpuid_clear(vcpu, X86_FEATURE_X2APIC);
+
+	/*
+	 * Currently, AVIC does not work with nested virtualization.
+	 * So, we disable AVIC when cpuid for SVM is set in the L1 guest.
+	 */
+	if (nested && guest_cpuid_has(vcpu, X86_FEATURE_SVM))
+		kvm_request_apicv_update(vcpu->kvm, false,
+					 APICV_INHIBIT_REASON_NESTED);
 }
 
-#define F(x) bit(X86_FEATURE_##x)
+#define F feature_bit
 
 static void svm_set_supported_cpuid(u32 func, struct kvm_cpuid_entry2 *entry)
 {
 	switch (func) {
 	case 0x1:
 		if (avic)
-			entry->ecx &= ~bit(X86_FEATURE_X2APIC);
+			entry->ecx &= ~F(X2APIC);
 		break;
 	case 0x80000001:
 		if (nested)
@@ -6001,6 +6109,11 @@ static bool svm_has_wbinvd_exit(void)
 	return true;
 }
 
+static bool svm_pku_supported(void)
+{
+	return false;
+}
+
 #define PRE_EX(exit)  { .exit_code = (exit), \
 			.stage = X86_ICPT_PRE_EXCEPT, }
 #define POST_EX(exit) { .exit_code = (exit), \
@@ -6186,9 +6299,12 @@ out:
 	return ret;
 }
 
-static void svm_handle_exit_irqoff(struct kvm_vcpu *vcpu)
+static void svm_handle_exit_irqoff(struct kvm_vcpu *vcpu,
+	enum exit_fastpath_completion *exit_fastpath)
 {
-
+	if (!is_guest_mode(vcpu) &&
+		to_svm(vcpu)->vmcb->control.exit_code == EXIT_REASON_MSR_WRITE)
+		*exit_fastpath = handle_fastpath_set_msr_irqoff(vcpu);
 }
 
 static void svm_sched_in(struct kvm_vcpu *vcpu, int cpu)
@@ -7242,6 +7358,22 @@ static bool svm_apic_init_signal_blocked(struct kvm_vcpu *vcpu)
 		   (svm->vmcb->control.intercept & (1ULL << INTERCEPT_INIT));
 }
 
+static bool svm_check_apicv_inhibit_reasons(ulong bit)
+{
+	ulong supported = BIT(APICV_INHIBIT_REASON_DISABLE) |
+			  BIT(APICV_INHIBIT_REASON_HYPERV) |
+			  BIT(APICV_INHIBIT_REASON_NESTED) |
+			  BIT(APICV_INHIBIT_REASON_IRQWIN) |
+			  BIT(APICV_INHIBIT_REASON_PIT_REINJ);
+
+	return supported & BIT(bit);
+}
+
+static void svm_pre_update_apicv_exec_ctrl(struct kvm *kvm, bool activate)
+{
+	avic_update_access_page(kvm, activate);
+}
+
 static struct kvm_x86_ops svm_x86_ops __ro_after_init = {
 	.cpu_has_kvm_support = has_svm,
 	.disabled_by_bios = is_disabled,
@@ -7259,7 +7391,7 @@ static struct kvm_x86_ops svm_x86_ops __ro_after_init = {
 
 	.vm_alloc = svm_vm_alloc,
 	.vm_free = svm_vm_free,
-	.vm_init = avic_vm_init,
+	.vm_init = svm_vm_init,
 	.vm_destroy = svm_vm_destroy,
 
 	.prepare_guest_switch = svm_prepare_guest_switch,
@@ -7316,8 +7448,9 @@ static struct kvm_x86_ops svm_x86_ops __ro_after_init = {
 	.enable_irq_window = enable_irq_window,
 	.update_cr8_intercept = update_cr8_intercept,
 	.set_virtual_apic_mode = svm_set_virtual_apic_mode,
-	.get_enable_apicv = svm_get_enable_apicv,
 	.refresh_apicv_exec_ctrl = svm_refresh_apicv_exec_ctrl,
+	.check_apicv_inhibit_reasons = svm_check_apicv_inhibit_reasons,
+	.pre_update_apicv_exec_ctrl = svm_pre_update_apicv_exec_ctrl,
 	.load_eoi_exitmap = svm_load_eoi_exitmap,
 	.hwapic_irr_update = svm_hwapic_irr_update,
 	.hwapic_isr_update = svm_hwapic_isr_update,
@@ -7341,6 +7474,7 @@ static struct kvm_x86_ops svm_x86_ops __ro_after_init = {
 	.xsaves_supported = svm_xsaves_supported,
 	.umip_emulated = svm_umip_emulated,
 	.pt_supported = svm_pt_supported,
+	.pku_supported = svm_pku_supported,
 
 	.set_supported_cpuid = svm_set_supported_cpuid,
 
diff --git a/arch/x86/kvm/trace.h b/arch/x86/kvm/trace.h
index 7c741a0c5f80..f194dd058470 100644
--- a/arch/x86/kvm/trace.h
+++ b/arch/x86/kvm/trace.h
@@ -1291,6 +1291,25 @@ TRACE_EVENT(kvm_hv_stimer_cleanup,
 		  __entry->vcpu_id, __entry->timer_index)
 );
 
+TRACE_EVENT(kvm_apicv_update_request,
+	    TP_PROTO(bool activate, unsigned long bit),
+	    TP_ARGS(activate, bit),
+
+	TP_STRUCT__entry(
+		__field(bool, activate)
+		__field(unsigned long, bit)
+	),
+
+	TP_fast_assign(
+		__entry->activate = activate;
+		__entry->bit = bit;
+	),
+
+	TP_printk("%s bit=%lu",
+		  __entry->activate ? "activate" : "deactivate",
+		  __entry->bit)
+);
+
 /*
  * Tracepoint for AMD AVIC
  */
diff --git a/arch/x86/kvm/vmx/capabilities.h b/arch/x86/kvm/vmx/capabilities.h
index 7aa69716d516..283bdb7071af 100644
--- a/arch/x86/kvm/vmx/capabilities.h
+++ b/arch/x86/kvm/vmx/capabilities.h
@@ -145,6 +145,11 @@ static inline bool vmx_umip_emulated(void)
 		SECONDARY_EXEC_DESC;
 }
 
+static inline bool vmx_pku_supported(void)
+{
+	return boot_cpu_has(X86_FEATURE_PKU);
+}
+
 static inline bool cpu_has_vmx_rdtscp(void)
 {
 	return vmcs_config.cpu_based_2nd_exec_ctrl &
diff --git a/arch/x86/kvm/vmx/evmcs.c b/arch/x86/kvm/vmx/evmcs.c
index 72359709cdc1..303813423c3e 100644
--- a/arch/x86/kvm/vmx/evmcs.c
+++ b/arch/x86/kvm/vmx/evmcs.c
@@ -7,6 +7,7 @@
 #include "evmcs.h"
 #include "vmcs.h"
 #include "vmx.h"
+#include "trace.h"
 
 DEFINE_STATIC_KEY_FALSE(enable_evmcs);
 
@@ -346,26 +347,93 @@ uint16_t nested_get_evmcs_version(struct kvm_vcpu *vcpu)
        return 0;
 }
 
+void nested_evmcs_filter_control_msr(u32 msr_index, u64 *pdata)
+{
+	u32 ctl_low = (u32)*pdata;
+	u32 ctl_high = (u32)(*pdata >> 32);
+
+	/*
+	 * Hyper-V 2016 and 2019 try using these features even when eVMCS
+	 * is enabled but there are no corresponding fields.
+	 */
+	switch (msr_index) {
+	case MSR_IA32_VMX_EXIT_CTLS:
+	case MSR_IA32_VMX_TRUE_EXIT_CTLS:
+		ctl_high &= ~VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL;
+		break;
+	case MSR_IA32_VMX_ENTRY_CTLS:
+	case MSR_IA32_VMX_TRUE_ENTRY_CTLS:
+		ctl_high &= ~VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL;
+		break;
+	case MSR_IA32_VMX_PROCBASED_CTLS2:
+		ctl_high &= ~SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES;
+		break;
+	}
+
+	*pdata = ctl_low | ((u64)ctl_high << 32);
+}
+
+int nested_evmcs_check_controls(struct vmcs12 *vmcs12)
+{
+	int ret = 0;
+	u32 unsupp_ctl;
+
+	unsupp_ctl = vmcs12->pin_based_vm_exec_control &
+		EVMCS1_UNSUPPORTED_PINCTRL;
+	if (unsupp_ctl) {
+		trace_kvm_nested_vmenter_failed(
+			"eVMCS: unsupported pin-based VM-execution controls",
+			unsupp_ctl);
+		ret = -EINVAL;
+	}
+
+	unsupp_ctl = vmcs12->secondary_vm_exec_control &
+		EVMCS1_UNSUPPORTED_2NDEXEC;
+	if (unsupp_ctl) {
+		trace_kvm_nested_vmenter_failed(
+			"eVMCS: unsupported secondary VM-execution controls",
+			unsupp_ctl);
+		ret = -EINVAL;
+	}
+
+	unsupp_ctl = vmcs12->vm_exit_controls &
+		EVMCS1_UNSUPPORTED_VMEXIT_CTRL;
+	if (unsupp_ctl) {
+		trace_kvm_nested_vmenter_failed(
+			"eVMCS: unsupported VM-exit controls",
+			unsupp_ctl);
+		ret = -EINVAL;
+	}
+
+	unsupp_ctl = vmcs12->vm_entry_controls &
+		EVMCS1_UNSUPPORTED_VMENTRY_CTRL;
+	if (unsupp_ctl) {
+		trace_kvm_nested_vmenter_failed(
+			"eVMCS: unsupported VM-entry controls",
+			unsupp_ctl);
+		ret = -EINVAL;
+	}
+
+	unsupp_ctl = vmcs12->vm_function_control & EVMCS1_UNSUPPORTED_VMFUNC;
+	if (unsupp_ctl) {
+		trace_kvm_nested_vmenter_failed(
+			"eVMCS: unsupported VM-function controls",
+			unsupp_ctl);
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
 int nested_enable_evmcs(struct kvm_vcpu *vcpu,
 			uint16_t *vmcs_version)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
-	bool evmcs_already_enabled = vmx->nested.enlightened_vmcs_enabled;
 
 	vmx->nested.enlightened_vmcs_enabled = true;
 
 	if (vmcs_version)
 		*vmcs_version = nested_get_evmcs_version(vcpu);
 
-	/* We don't support disabling the feature for simplicity. */
-	if (evmcs_already_enabled)
-		return 0;
-
-	vmx->nested.msrs.pinbased_ctls_high &= ~EVMCS1_UNSUPPORTED_PINCTRL;
-	vmx->nested.msrs.entry_ctls_high &= ~EVMCS1_UNSUPPORTED_VMENTRY_CTRL;
-	vmx->nested.msrs.exit_ctls_high &= ~EVMCS1_UNSUPPORTED_VMEXIT_CTRL;
-	vmx->nested.msrs.secondary_ctls_high &= ~EVMCS1_UNSUPPORTED_2NDEXEC;
-	vmx->nested.msrs.vmfunc_controls &= ~EVMCS1_UNSUPPORTED_VMFUNC;
-
 	return 0;
 }
diff --git a/arch/x86/kvm/vmx/evmcs.h b/arch/x86/kvm/vmx/evmcs.h
index 07ebf6882a45..6de47f2569c9 100644
--- a/arch/x86/kvm/vmx/evmcs.h
+++ b/arch/x86/kvm/vmx/evmcs.h
@@ -10,6 +10,7 @@
 
 #include "capabilities.h"
 #include "vmcs.h"
+#include "vmcs12.h"
 
 struct vmcs_config;
 
@@ -201,5 +202,7 @@ bool nested_enlightened_vmentry(struct kvm_vcpu *vcpu, u64 *evmcs_gpa);
 uint16_t nested_get_evmcs_version(struct kvm_vcpu *vcpu);
 int nested_enable_evmcs(struct kvm_vcpu *vcpu,
 			uint16_t *vmcs_version);
+void nested_evmcs_filter_control_msr(u32 msr_index, u64 *pdata);
+int nested_evmcs_check_controls(struct vmcs12 *vmcs12);
 
 #endif /* __KVM_X86_VMX_EVMCS_H */
diff --git a/arch/x86/kvm/vmx/nested.c b/arch/x86/kvm/vmx/nested.c
index 6879966b7648..657c2eda357c 100644
--- a/arch/x86/kvm/vmx/nested.c
+++ b/arch/x86/kvm/vmx/nested.c
@@ -28,16 +28,6 @@ module_param(nested_early_check, bool, S_IRUGO);
 	failed;								\
 })
 
-#define SET_MSR_OR_WARN(vcpu, idx, data)				\
-({									\
-	bool failed = kvm_set_msr(vcpu, idx, data);			\
-	if (failed)							\
-		pr_warn_ratelimited(					\
-				"%s cannot write MSR (0x%x, 0x%llx)\n",	\
-				__func__, idx, data);			\
-	failed;								\
-})
-
 /*
  * Hyper-V requires all of these, so mark them as supported even though
  * they are just treated the same as all-context.
@@ -1084,10 +1074,10 @@ static bool nested_cr3_valid(struct kvm_vcpu *vcpu, unsigned long val)
 }
 
 /*
- * Load guest's/host's cr3 at nested entry/exit. nested_ept is true if we are
- * emulating VM entry into a guest with EPT enabled.
- * Returns 0 on success, 1 on failure. Invalid state exit qualification code
- * is assigned to entry_failure_code on failure.
+ * Load guest's/host's cr3 at nested entry/exit.  @nested_ept is true if we are
+ * emulating VM-Entry into a guest with EPT enabled.  On failure, the expected
+ * Exit Qualification (for a VM-Entry consistency check VM-Exit) is assigned to
+ * @entry_failure_code.
  */
 static int nested_vmx_load_cr3(struct kvm_vcpu *vcpu, unsigned long cr3, bool nested_ept,
 			       u32 *entry_failure_code)
@@ -2172,8 +2162,8 @@ static void prepare_vmcs02_early(struct vcpu_vmx *vmx, struct vmcs12 *vmcs12)
 	 * EXEC CONTROLS
 	 */
 	exec_control = vmx_exec_control(vmx); /* L0's desires */
-	exec_control &= ~CPU_BASED_VIRTUAL_INTR_PENDING;
-	exec_control &= ~CPU_BASED_VIRTUAL_NMI_PENDING;
+	exec_control &= ~CPU_BASED_INTR_WINDOW_EXITING;
+	exec_control &= ~CPU_BASED_NMI_WINDOW_EXITING;
 	exec_control &= ~CPU_BASED_TPR_SHADOW;
 	exec_control |= vmcs12->cpu_based_vm_exec_control;
 
@@ -2550,8 +2540,8 @@ static int prepare_vmcs02(struct kvm_vcpu *vcpu, struct vmcs12 *vmcs12,
 		vcpu->arch.walk_mmu->inject_page_fault = vmx_inject_page_fault_nested;
 
 	if ((vmcs12->vm_entry_controls & VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL) &&
-	    SET_MSR_OR_WARN(vcpu, MSR_CORE_PERF_GLOBAL_CTRL,
-			    vmcs12->guest_ia32_perf_global_ctrl))
+	    WARN_ON_ONCE(kvm_set_msr(vcpu, MSR_CORE_PERF_GLOBAL_CTRL,
+				     vmcs12->guest_ia32_perf_global_ctrl)))
 		return -EINVAL;
 
 	kvm_rsp_write(vcpu, vmcs12->guest_rsp);
@@ -2566,7 +2556,7 @@ static int nested_vmx_check_nmi_controls(struct vmcs12 *vmcs12)
 		return -EINVAL;
 
 	if (CC(!nested_cpu_has_virtual_nmis(vmcs12) &&
-	       nested_cpu_has(vmcs12, CPU_BASED_VIRTUAL_NMI_PENDING)))
+	       nested_cpu_has(vmcs12, CPU_BASED_NMI_WINDOW_EXITING)))
 		return -EINVAL;
 
 	return 0;
@@ -2767,6 +2757,9 @@ static int nested_vmx_check_controls(struct kvm_vcpu *vcpu,
 	    nested_check_vm_entry_controls(vcpu, vmcs12))
 		return -EINVAL;
 
+	if (to_vmx(vcpu)->nested.enlightened_vmcs_enabled)
+		return nested_evmcs_check_controls(vmcs12);
+
 	return 0;
 }
 
@@ -2823,7 +2816,6 @@ static int nested_vmx_check_host_state(struct kvm_vcpu *vcpu,
 	    CC(vmcs12->host_ss_selector == 0 && !ia32e))
 		return -EINVAL;
 
-#ifdef CONFIG_X86_64
 	if (CC(is_noncanonical_address(vmcs12->host_fs_base, vcpu)) ||
 	    CC(is_noncanonical_address(vmcs12->host_gs_base, vcpu)) ||
 	    CC(is_noncanonical_address(vmcs12->host_gdtr_base, vcpu)) ||
@@ -2831,7 +2823,6 @@ static int nested_vmx_check_host_state(struct kvm_vcpu *vcpu,
 	    CC(is_noncanonical_address(vmcs12->host_tr_base, vcpu)) ||
 	    CC(is_noncanonical_address(vmcs12->host_rip, vcpu)))
 		return -EINVAL;
-#endif
 
 	/*
 	 * If the load IA32_EFER VM-exit control is 1, bits reserved in the
@@ -2899,6 +2890,10 @@ static int nested_vmx_check_guest_state(struct kvm_vcpu *vcpu,
 	    CC(!nested_guest_cr4_valid(vcpu, vmcs12->guest_cr4)))
 		return -EINVAL;
 
+	if ((vmcs12->vm_entry_controls & VM_ENTRY_LOAD_DEBUG_CONTROLS) &&
+	    CC(!kvm_dr7_valid(vmcs12->guest_dr7)))
+		return -EINVAL;
+
 	if ((vmcs12->vm_entry_controls & VM_ENTRY_LOAD_IA32_PAT) &&
 	    CC(!kvm_pat_valid(vmcs12->guest_ia32_pat)))
 		return -EINVAL;
@@ -3048,9 +3043,6 @@ static int nested_vmx_check_vmentry_hw(struct kvm_vcpu *vcpu)
 	return 0;
 }
 
-static inline bool nested_vmx_prepare_msr_bitmap(struct kvm_vcpu *vcpu,
-						 struct vmcs12 *vmcs12);
-
 static bool nested_get_vmcs12_pages(struct kvm_vcpu *vcpu)
 {
 	struct vmcs12 *vmcs12 = get_vmcs12(vcpu);
@@ -3183,7 +3175,7 @@ enum nvmx_vmentry_status nested_vmx_enter_non_root_mode(struct kvm_vcpu *vcpu,
 	u32 exit_qual;
 
 	evaluate_pending_interrupts = exec_controls_get(vmx) &
-		(CPU_BASED_VIRTUAL_INTR_PENDING | CPU_BASED_VIRTUAL_NMI_PENDING);
+		(CPU_BASED_INTR_WINDOW_EXITING | CPU_BASED_NMI_WINDOW_EXITING);
 	if (likely(!evaluate_pending_interrupts) && kvm_vcpu_apicv_active(vcpu))
 		evaluate_pending_interrupts |= vmx_has_apicv_interrupt(vcpu);
 
@@ -3230,7 +3222,7 @@ enum nvmx_vmentry_status nested_vmx_enter_non_root_mode(struct kvm_vcpu *vcpu,
 	}
 
 	enter_guest_mode(vcpu);
-	if (vmcs12->cpu_based_vm_exec_control & CPU_BASED_USE_TSC_OFFSETING)
+	if (vmcs12->cpu_based_vm_exec_control & CPU_BASED_USE_TSC_OFFSETTING)
 		vcpu->arch.tsc_offset += vmcs12->tsc_offset;
 
 	if (prepare_vmcs02(vcpu, vmcs12, &exit_qual))
@@ -3294,7 +3286,7 @@ enum nvmx_vmentry_status nested_vmx_enter_non_root_mode(struct kvm_vcpu *vcpu,
 	 * 26.7 "VM-entry failures during or after loading guest state".
 	 */
 vmentry_fail_vmexit_guest_mode:
-	if (vmcs12->cpu_based_vm_exec_control & CPU_BASED_USE_TSC_OFFSETING)
+	if (vmcs12->cpu_based_vm_exec_control & CPU_BASED_USE_TSC_OFFSETTING)
 		vcpu->arch.tsc_offset -= vmcs12->tsc_offset;
 	leave_guest_mode(vcpu);
 
@@ -3407,8 +3399,8 @@ static int nested_vmx_run(struct kvm_vcpu *vcpu, bool launch)
 	 */
 	if ((vmcs12->guest_activity_state == GUEST_ACTIVITY_HLT) &&
 	    !(vmcs12->vm_entry_intr_info_field & INTR_INFO_VALID_MASK) &&
-	    !(vmcs12->cpu_based_vm_exec_control & CPU_BASED_VIRTUAL_NMI_PENDING) &&
-	    !((vmcs12->cpu_based_vm_exec_control & CPU_BASED_VIRTUAL_INTR_PENDING) &&
+	    !(vmcs12->cpu_based_vm_exec_control & CPU_BASED_NMI_WINDOW_EXITING) &&
+	    !((vmcs12->cpu_based_vm_exec_control & CPU_BASED_INTR_WINDOW_EXITING) &&
 	      (vmcs12->guest_rflags & X86_EFLAGS_IF))) {
 		vmx->nested.nested_run_pending = 0;
 		return kvm_vcpu_halt(vcpu);
@@ -3427,7 +3419,7 @@ vmentry_failed:
 
 /*
  * On a nested exit from L2 to L1, vmcs12.guest_cr0 might not be up-to-date
- * because L2 may have changed some cr0 bits directly (CRO_GUEST_HOST_MASK).
+ * because L2 may have changed some cr0 bits directly (CR0_GUEST_HOST_MASK).
  * This function returns the new value we should put in vmcs12.guest_cr0.
  * It's not enough to just return the vmcs02 GUEST_CR0. Rather,
  *  1. Bits that neither L0 nor L1 trapped, were set directly by L2 and are now
@@ -3999,8 +3991,8 @@ static void load_vmcs12_host_state(struct kvm_vcpu *vcpu,
 		vcpu->arch.pat = vmcs12->host_ia32_pat;
 	}
 	if (vmcs12->vm_exit_controls & VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL)
-		SET_MSR_OR_WARN(vcpu, MSR_CORE_PERF_GLOBAL_CTRL,
-				vmcs12->host_ia32_perf_global_ctrl);
+		WARN_ON_ONCE(kvm_set_msr(vcpu, MSR_CORE_PERF_GLOBAL_CTRL,
+					 vmcs12->host_ia32_perf_global_ctrl));
 
 	/* Set L1 segment info according to Intel SDM
 	    27.5.2 Loading Host Segment and Descriptor-Table Registers */
@@ -4209,7 +4201,7 @@ void nested_vmx_vmexit(struct kvm_vcpu *vcpu, u32 exit_reason,
 	if (nested_cpu_has_preemption_timer(vmcs12))
 		hrtimer_cancel(&to_vmx(vcpu)->nested.preemption_timer);
 
-	if (vmcs12->cpu_based_vm_exec_control & CPU_BASED_USE_TSC_OFFSETING)
+	if (vmcs12->cpu_based_vm_exec_control & CPU_BASED_USE_TSC_OFFSETTING)
 		vcpu->arch.tsc_offset -= vmcs12->tsc_offset;
 
 	if (likely(!vmx->fail)) {
@@ -4734,8 +4726,6 @@ static int handle_vmclear(struct kvm_vcpu *vcpu)
 	return nested_vmx_succeed(vcpu);
 }
 
-static int nested_vmx_run(struct kvm_vcpu *vcpu, bool launch);
-
 /* Emulate the VMLAUNCH instruction */
 static int handle_vmlaunch(struct kvm_vcpu *vcpu)
 {
@@ -4751,36 +4741,32 @@ static int handle_vmresume(struct kvm_vcpu *vcpu)
 
 static int handle_vmread(struct kvm_vcpu *vcpu)
 {
-	unsigned long field;
-	u64 field_value;
+	struct vmcs12 *vmcs12 = is_guest_mode(vcpu) ? get_shadow_vmcs12(vcpu)
+						    : get_vmcs12(vcpu);
 	unsigned long exit_qualification = vmcs_readl(EXIT_QUALIFICATION);
-	u32 vmx_instruction_info = vmcs_read32(VMX_INSTRUCTION_INFO);
-	int len;
-	gva_t gva = 0;
-	struct vmcs12 *vmcs12;
+	u32 instr_info = vmcs_read32(VMX_INSTRUCTION_INFO);
+	struct vcpu_vmx *vmx = to_vmx(vcpu);
 	struct x86_exception e;
+	unsigned long field;
+	u64 value;
+	gva_t gva = 0;
 	short offset;
+	int len;
 
 	if (!nested_vmx_check_permission(vcpu))
 		return 1;
 
-	if (to_vmx(vcpu)->nested.current_vmptr == -1ull)
+	/*
+	 * In VMX non-root operation, when the VMCS-link pointer is -1ull,
+	 * any VMREAD sets the ALU flags for VMfailInvalid.
+	 */
+	if (vmx->nested.current_vmptr == -1ull ||
+	    (is_guest_mode(vcpu) &&
+	     get_vmcs12(vcpu)->vmcs_link_pointer == -1ull))
 		return nested_vmx_failInvalid(vcpu);
 
-	if (!is_guest_mode(vcpu))
-		vmcs12 = get_vmcs12(vcpu);
-	else {
-		/*
-		 * When vmcs->vmcs_link_pointer is -1ull, any VMREAD
-		 * to shadowed-field sets the ALU flags for VMfailInvalid.
-		 */
-		if (get_vmcs12(vcpu)->vmcs_link_pointer == -1ull)
-			return nested_vmx_failInvalid(vcpu);
-		vmcs12 = get_shadow_vmcs12(vcpu);
-	}
-
 	/* Decode instruction info and find the field to read */
-	field = kvm_register_readl(vcpu, (((vmx_instruction_info) >> 28) & 0xf));
+	field = kvm_register_readl(vcpu, (((instr_info) >> 28) & 0xf));
 
 	offset = vmcs_field_to_offset(field);
 	if (offset < 0)
@@ -4790,25 +4776,26 @@ static int handle_vmread(struct kvm_vcpu *vcpu)
 	if (!is_guest_mode(vcpu) && is_vmcs12_ext_field(field))
 		copy_vmcs02_to_vmcs12_rare(vcpu, vmcs12);
 
-	/* Read the field, zero-extended to a u64 field_value */
-	field_value = vmcs12_read_any(vmcs12, field, offset);
+	/* Read the field, zero-extended to a u64 value */
+	value = vmcs12_read_any(vmcs12, field, offset);
 
 	/*
 	 * Now copy part of this value to register or memory, as requested.
 	 * Note that the number of bits actually copied is 32 or 64 depending
 	 * on the guest's mode (32 or 64 bit), not on the given field's length.
 	 */
-	if (vmx_instruction_info & (1u << 10)) {
-		kvm_register_writel(vcpu, (((vmx_instruction_info) >> 3) & 0xf),
-			field_value);
+	if (instr_info & BIT(10)) {
+		kvm_register_writel(vcpu, (((instr_info) >> 3) & 0xf), value);
 	} else {
 		len = is_64_bit_mode(vcpu) ? 8 : 4;
 		if (get_vmx_mem_address(vcpu, exit_qualification,
-				vmx_instruction_info, true, len, &gva))
+					instr_info, true, len, &gva))
 			return 1;
 		/* _system ok, nested_vmx_check_permission has verified cpl=0 */
-		if (kvm_write_guest_virt_system(vcpu, gva, &field_value, len, &e))
+		if (kvm_write_guest_virt_system(vcpu, gva, &value, len, &e)) {
 			kvm_inject_page_fault(vcpu, &e);
+			return 1;
+		}
 	}
 
 	return nested_vmx_succeed(vcpu);
@@ -4840,46 +4827,58 @@ static bool is_shadow_field_ro(unsigned long field)
 
 static int handle_vmwrite(struct kvm_vcpu *vcpu)
 {
+	struct vmcs12 *vmcs12 = is_guest_mode(vcpu) ? get_shadow_vmcs12(vcpu)
+						    : get_vmcs12(vcpu);
+	unsigned long exit_qualification = vmcs_readl(EXIT_QUALIFICATION);
+	u32 instr_info = vmcs_read32(VMX_INSTRUCTION_INFO);
+	struct vcpu_vmx *vmx = to_vmx(vcpu);
+	struct x86_exception e;
 	unsigned long field;
-	int len;
+	short offset;
 	gva_t gva;
-	struct vcpu_vmx *vmx = to_vmx(vcpu);
-	unsigned long exit_qualification = vmcs_readl(EXIT_QUALIFICATION);
-	u32 vmx_instruction_info = vmcs_read32(VMX_INSTRUCTION_INFO);
+	int len;
 
-	/* The value to write might be 32 or 64 bits, depending on L1's long
+	/*
+	 * The value to write might be 32 or 64 bits, depending on L1's long
 	 * mode, and eventually we need to write that into a field of several
 	 * possible lengths. The code below first zero-extends the value to 64
-	 * bit (field_value), and then copies only the appropriate number of
+	 * bit (value), and then copies only the appropriate number of
 	 * bits into the vmcs12 field.
 	 */
-	u64 field_value = 0;
-	struct x86_exception e;
-	struct vmcs12 *vmcs12;
-	short offset;
+	u64 value = 0;
 
 	if (!nested_vmx_check_permission(vcpu))
 		return 1;
 
-	if (vmx->nested.current_vmptr == -1ull)
+	/*
+	 * In VMX non-root operation, when the VMCS-link pointer is -1ull,
+	 * any VMWRITE sets the ALU flags for VMfailInvalid.
+	 */
+	if (vmx->nested.current_vmptr == -1ull ||
+	    (is_guest_mode(vcpu) &&
+	     get_vmcs12(vcpu)->vmcs_link_pointer == -1ull))
 		return nested_vmx_failInvalid(vcpu);
 
-	if (vmx_instruction_info & (1u << 10))
-		field_value = kvm_register_readl(vcpu,
-			(((vmx_instruction_info) >> 3) & 0xf));
+	if (instr_info & BIT(10))
+		value = kvm_register_readl(vcpu, (((instr_info) >> 3) & 0xf));
 	else {
 		len = is_64_bit_mode(vcpu) ? 8 : 4;
 		if (get_vmx_mem_address(vcpu, exit_qualification,
-				vmx_instruction_info, false, len, &gva))
+					instr_info, false, len, &gva))
 			return 1;
-		if (kvm_read_guest_virt(vcpu, gva, &field_value, len, &e)) {
+		if (kvm_read_guest_virt(vcpu, gva, &value, len, &e)) {
 			kvm_inject_page_fault(vcpu, &e);
 			return 1;
 		}
 	}
 
+	field = kvm_register_readl(vcpu, (((instr_info) >> 28) & 0xf));
+
+	offset = vmcs_field_to_offset(field);
+	if (offset < 0)
+		return nested_vmx_failValid(vcpu,
+			VMXERR_UNSUPPORTED_VMCS_COMPONENT);
 
-	field = kvm_register_readl(vcpu, (((vmx_instruction_info) >> 28) & 0xf));
 	/*
 	 * If the vCPU supports "VMWRITE to any supported field in the
 	 * VMCS," then the "read-only" fields are actually read/write.
@@ -4889,29 +4888,12 @@ static int handle_vmwrite(struct kvm_vcpu *vcpu)
 		return nested_vmx_failValid(vcpu,
 			VMXERR_VMWRITE_READ_ONLY_VMCS_COMPONENT);
 
-	if (!is_guest_mode(vcpu)) {
-		vmcs12 = get_vmcs12(vcpu);
-
-		/*
-		 * Ensure vmcs12 is up-to-date before any VMWRITE that dirties
-		 * vmcs12, else we may crush a field or consume a stale value.
-		 */
-		if (!is_shadow_field_rw(field))
-			copy_vmcs02_to_vmcs12_rare(vcpu, vmcs12);
-	} else {
-		/*
-		 * When vmcs->vmcs_link_pointer is -1ull, any VMWRITE
-		 * to shadowed-field sets the ALU flags for VMfailInvalid.
-		 */
-		if (get_vmcs12(vcpu)->vmcs_link_pointer == -1ull)
-			return nested_vmx_failInvalid(vcpu);
-		vmcs12 = get_shadow_vmcs12(vcpu);
-	}
-
-	offset = vmcs_field_to_offset(field);
-	if (offset < 0)
-		return nested_vmx_failValid(vcpu,
-			VMXERR_UNSUPPORTED_VMCS_COMPONENT);
+	/*
+	 * Ensure vmcs12 is up-to-date before any VMWRITE that dirties
+	 * vmcs12, else we may crush a field or consume a stale value.
+	 */
+	if (!is_guest_mode(vcpu) && !is_shadow_field_rw(field))
+		copy_vmcs02_to_vmcs12_rare(vcpu, vmcs12);
 
 	/*
 	 * Some Intel CPUs intentionally drop the reserved bits of the AR byte
@@ -4922,9 +4904,9 @@ static int handle_vmwrite(struct kvm_vcpu *vcpu)
 	 * the stripped down value, L2 sees the full value as stored by KVM).
 	 */
 	if (field >= GUEST_ES_AR_BYTES && field <= GUEST_TR_AR_BYTES)
-		field_value &= 0x1f0ff;
+		value &= 0x1f0ff;
 
-	vmcs12_write_any(vmcs12, field, offset, field_value);
+	vmcs12_write_any(vmcs12, field, offset, value);
 
 	/*
 	 * Do not track vmcs12 dirty-state if in guest-mode as we actually
@@ -4941,7 +4923,7 @@ static int handle_vmwrite(struct kvm_vcpu *vcpu)
 			preempt_disable();
 			vmcs_load(vmx->vmcs01.shadow_vmcs);
 
-			__vmcs_writel(field, field_value);
+			__vmcs_writel(field, value);
 
 			vmcs_clear(vmx->vmcs01.shadow_vmcs);
 			vmcs_load(vmx->loaded_vmcs->vmcs);
@@ -5524,10 +5506,10 @@ bool nested_vmx_exit_reflected(struct kvm_vcpu *vcpu, u32 exit_reason)
 		return false;
 	case EXIT_REASON_TRIPLE_FAULT:
 		return true;
-	case EXIT_REASON_PENDING_INTERRUPT:
-		return nested_cpu_has(vmcs12, CPU_BASED_VIRTUAL_INTR_PENDING);
+	case EXIT_REASON_INTERRUPT_WINDOW:
+		return nested_cpu_has(vmcs12, CPU_BASED_INTR_WINDOW_EXITING);
 	case EXIT_REASON_NMI_WINDOW:
-		return nested_cpu_has(vmcs12, CPU_BASED_VIRTUAL_NMI_PENDING);
+		return nested_cpu_has(vmcs12, CPU_BASED_NMI_WINDOW_EXITING);
 	case EXIT_REASON_TASK_SWITCH:
 		return true;
 	case EXIT_REASON_CPUID:
@@ -6015,8 +5997,8 @@ void nested_vmx_setup_ctls_msrs(struct nested_vmx_msrs *msrs, u32 ept_caps,
 	msrs->procbased_ctls_low =
 		CPU_BASED_ALWAYSON_WITHOUT_TRUE_MSR;
 	msrs->procbased_ctls_high &=
-		CPU_BASED_VIRTUAL_INTR_PENDING |
-		CPU_BASED_VIRTUAL_NMI_PENDING | CPU_BASED_USE_TSC_OFFSETING |
+		CPU_BASED_INTR_WINDOW_EXITING |
+		CPU_BASED_NMI_WINDOW_EXITING | CPU_BASED_USE_TSC_OFFSETTING |
 		CPU_BASED_HLT_EXITING | CPU_BASED_INVLPG_EXITING |
 		CPU_BASED_MWAIT_EXITING | CPU_BASED_CR3_LOAD_EXITING |
 		CPU_BASED_CR3_STORE_EXITING |
diff --git a/arch/x86/kvm/vmx/pmu_intel.c b/arch/x86/kvm/vmx/pmu_intel.c
index 7023138b1cb0..fd21cdb10b79 100644
--- a/arch/x86/kvm/vmx/pmu_intel.c
+++ b/arch/x86/kvm/vmx/pmu_intel.c
@@ -86,10 +86,14 @@ static unsigned intel_find_arch_event(struct kvm_pmu *pmu,
 
 static unsigned intel_find_fixed_event(int idx)
 {
-	if (idx >= ARRAY_SIZE(fixed_pmc_events))
+	u32 event;
+	size_t size = ARRAY_SIZE(fixed_pmc_events);
+
+	if (idx >= size)
 		return PERF_COUNT_HW_MAX;
 
-	return intel_arch_events[fixed_pmc_events[idx]].event_type;
+	event = fixed_pmc_events[array_index_nospec(idx, size)];
+	return intel_arch_events[event].event_type;
 }
 
 /* check if a PMC is enabled by comparing it with globl_ctrl bits. */
@@ -130,16 +134,20 @@ static struct kvm_pmc *intel_rdpmc_ecx_to_pmc(struct kvm_vcpu *vcpu,
 	struct kvm_pmu *pmu = vcpu_to_pmu(vcpu);
 	bool fixed = idx & (1u << 30);
 	struct kvm_pmc *counters;
+	unsigned int num_counters;
 
 	idx &= ~(3u << 30);
-	if (!fixed && idx >= pmu->nr_arch_gp_counters)
-		return NULL;
-	if (fixed && idx >= pmu->nr_arch_fixed_counters)
+	if (fixed) {
+		counters = pmu->fixed_counters;
+		num_counters = pmu->nr_arch_fixed_counters;
+	} else {
+		counters = pmu->gp_counters;
+		num_counters = pmu->nr_arch_gp_counters;
+	}
+	if (idx >= num_counters)
 		return NULL;
-	counters = fixed ? pmu->fixed_counters : pmu->gp_counters;
 	*mask &= pmu->counter_bitmask[fixed ? KVM_PMC_FIXED : KVM_PMC_GP];
-
-	return &counters[idx];
+	return &counters[array_index_nospec(idx, num_counters)];
 }
 
 static bool intel_is_valid_msr(struct kvm_vcpu *vcpu, u32 msr)
@@ -252,13 +260,12 @@ static int intel_pmu_set_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 		break;
 	default:
 		if ((pmc = get_gp_pmc(pmu, msr, MSR_IA32_PERFCTR0))) {
-			if (msr_info->host_initiated)
-				pmc->counter = data;
-			else
-				pmc->counter = (s32)data;
+			if (!msr_info->host_initiated)
+				data = (s64)(s32)data;
+			pmc->counter += data - pmc_read_counter(pmc);
 			return 0;
 		} else if ((pmc = get_fixed_pmc(pmu, msr))) {
-			pmc->counter = data;
+			pmc->counter += data - pmc_read_counter(pmc);
 			return 0;
 		} else if ((pmc = get_gp_pmc(pmu, msr, MSR_P6_EVNTSEL0))) {
 			if (data == pmc->eventsel)
diff --git a/arch/x86/kvm/vmx/vmcs_shadow_fields.h b/arch/x86/kvm/vmx/vmcs_shadow_fields.h
index eb1ecd16fd22..cad128d1657b 100644
--- a/arch/x86/kvm/vmx/vmcs_shadow_fields.h
+++ b/arch/x86/kvm/vmx/vmcs_shadow_fields.h
@@ -23,12 +23,12 @@ BUILD_BUG_ON(1)
  *
  * When adding or removing fields here, note that shadowed
  * fields must always be synced by prepare_vmcs02, not just
- * prepare_vmcs02_full.
+ * prepare_vmcs02_rare.
  */
 
 /*
  * Keeping the fields ordered by size is an attempt at improving
- * branch prediction in vmcs_read_any and vmcs_write_any.
+ * branch prediction in vmcs12_read_any and vmcs12_write_any.
  */
 
 /* 16-bits */
diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
index cdb4bf50ee14..9a6664886f2e 100644
--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -1057,6 +1057,12 @@ static unsigned long segment_base(u16 selector)
 }
 #endif
 
+static inline bool pt_can_write_msr(struct vcpu_vmx *vmx)
+{
+	return (pt_mode == PT_MODE_HOST_GUEST) &&
+	       !(vmx->pt_desc.guest.ctl & RTIT_CTL_TRACEEN);
+}
+
 static inline void pt_load_msr(struct pt_ctx *ctx, u32 addr_range)
 {
 	u32 i;
@@ -1422,8 +1428,6 @@ static bool emulation_required(struct kvm_vcpu *vcpu)
 	return emulate_invalid_guest_state && !guest_state_valid(vcpu);
 }
 
-static void vmx_decache_cr0_guest_bits(struct kvm_vcpu *vcpu);
-
 unsigned long vmx_get_rflags(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
@@ -1716,7 +1720,7 @@ static u64 vmx_read_l1_tsc_offset(struct kvm_vcpu *vcpu)
 	struct vmcs12 *vmcs12 = get_vmcs12(vcpu);
 
 	if (is_guest_mode(vcpu) &&
-	    (vmcs12->cpu_based_vm_exec_control & CPU_BASED_USE_TSC_OFFSETING))
+	    (vmcs12->cpu_based_vm_exec_control & CPU_BASED_USE_TSC_OFFSETTING))
 		return vcpu->arch.tsc_offset - vmcs12->tsc_offset;
 
 	return vcpu->arch.tsc_offset;
@@ -1734,7 +1738,7 @@ static u64 vmx_write_l1_tsc_offset(struct kvm_vcpu *vcpu, u64 offset)
 	 * to the newly set TSC to get L2's TSC.
 	 */
 	if (is_guest_mode(vcpu) &&
-	    (vmcs12->cpu_based_vm_exec_control & CPU_BASED_USE_TSC_OFFSETING))
+	    (vmcs12->cpu_based_vm_exec_control & CPU_BASED_USE_TSC_OFFSETTING))
 		g_tsc_offset = vmcs12->tsc_offset;
 
 	trace_kvm_write_tsc_offset(vcpu->vcpu_id,
@@ -1773,8 +1777,6 @@ static int vmx_get_msr_feature(struct kvm_msr_entry *msr)
 	default:
 		return 1;
 	}
-
-	return 0;
 }
 
 /*
@@ -1849,8 +1851,20 @@ static int vmx_get_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 	case MSR_IA32_VMX_BASIC ... MSR_IA32_VMX_VMFUNC:
 		if (!nested_vmx_allowed(vcpu))
 			return 1;
-		return vmx_get_vmx_msr(&vmx->nested.msrs, msr_info->index,
-				       &msr_info->data);
+		if (vmx_get_vmx_msr(&vmx->nested.msrs, msr_info->index,
+				    &msr_info->data))
+			return 1;
+		/*
+		 * Enlightened VMCS v1 doesn't have certain fields, but buggy
+		 * Hyper-V versions are still trying to use corresponding
+		 * features when they are exposed. Filter out the essential
+		 * minimum.
+		 */
+		if (!msr_info->host_initiated &&
+		    vmx->nested.enlightened_vmcs_enabled)
+			nested_evmcs_filter_control_msr(msr_info->index,
+							&msr_info->data);
+		break;
 	case MSR_IA32_RTIT_CTL:
 		if (pt_mode != PT_MODE_HOST_GUEST)
 			return 1;
@@ -1916,7 +1930,7 @@ static int vmx_get_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 }
 
 /*
- * Writes msr value into into the appropriate "register".
+ * Writes msr value into the appropriate "register".
  * Returns 0 on success, non-0 otherwise.
  * Assumes vcpu_load() was already called.
  */
@@ -1994,12 +2008,10 @@ static int vmx_set_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 		    !guest_cpuid_has(vcpu, X86_FEATURE_SPEC_CTRL))
 			return 1;
 
-		/* The STIBP bit doesn't fault even if it's not advertised */
-		if (data & ~(SPEC_CTRL_IBRS | SPEC_CTRL_STIBP | SPEC_CTRL_SSBD))
+		if (data & ~kvm_spec_ctrl_valid_bits(vcpu))
 			return 1;
 
 		vmx->spec_ctrl = data;
-
 		if (!data)
 			break;
 
@@ -2010,7 +2022,7 @@ static int vmx_set_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 		 *
 		 * For nested:
 		 * The handling of the MSR bitmap for L2 guests is done in
-		 * nested_vmx_merge_msr_bitmap. We should not touch the
+		 * nested_vmx_prepare_msr_bitmap. We should not touch the
 		 * vmcs02.msr_bitmap here since it gets completely overwritten
 		 * in the merging. We update the vmcs01 here for L1 as well
 		 * since it will end up touching the MSR anyway now.
@@ -2033,7 +2045,8 @@ static int vmx_set_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 
 		if (data & ~PRED_CMD_IBPB)
 			return 1;
-
+		if (!boot_cpu_has(X86_FEATURE_SPEC_CTRL))
+			return 1;
 		if (!data)
 			break;
 
@@ -2046,7 +2059,7 @@ static int vmx_set_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 		 *
 		 * For nested:
 		 * The handling of the MSR bitmap for L2 guests is done in
-		 * nested_vmx_merge_msr_bitmap. We should not touch the
+		 * nested_vmx_prepare_msr_bitmap. We should not touch the
 		 * vmcs02.msr_bitmap here since it gets completely overwritten
 		 * in the merging.
 		 */
@@ -2104,47 +2117,50 @@ static int vmx_set_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 		pt_update_intercept_for_msr(vmx);
 		break;
 	case MSR_IA32_RTIT_STATUS:
-		if ((pt_mode != PT_MODE_HOST_GUEST) ||
-			(vmx->pt_desc.guest.ctl & RTIT_CTL_TRACEEN) ||
-			(data & MSR_IA32_RTIT_STATUS_MASK))
+		if (!pt_can_write_msr(vmx))
+			return 1;
+		if (data & MSR_IA32_RTIT_STATUS_MASK)
 			return 1;
 		vmx->pt_desc.guest.status = data;
 		break;
 	case MSR_IA32_RTIT_CR3_MATCH:
-		if ((pt_mode != PT_MODE_HOST_GUEST) ||
-			(vmx->pt_desc.guest.ctl & RTIT_CTL_TRACEEN) ||
-			!intel_pt_validate_cap(vmx->pt_desc.caps,
-						PT_CAP_cr3_filtering))
+		if (!pt_can_write_msr(vmx))
+			return 1;
+		if (!intel_pt_validate_cap(vmx->pt_desc.caps,
+					   PT_CAP_cr3_filtering))
 			return 1;
 		vmx->pt_desc.guest.cr3_match = data;
 		break;
 	case MSR_IA32_RTIT_OUTPUT_BASE:
-		if ((pt_mode != PT_MODE_HOST_GUEST) ||
-			(vmx->pt_desc.guest.ctl & RTIT_CTL_TRACEEN) ||
-			(!intel_pt_validate_cap(vmx->pt_desc.caps,
-					PT_CAP_topa_output) &&
-			 !intel_pt_validate_cap(vmx->pt_desc.caps,
-					PT_CAP_single_range_output)) ||
-			(data & MSR_IA32_RTIT_OUTPUT_BASE_MASK))
+		if (!pt_can_write_msr(vmx))
+			return 1;
+		if (!intel_pt_validate_cap(vmx->pt_desc.caps,
+					   PT_CAP_topa_output) &&
+		    !intel_pt_validate_cap(vmx->pt_desc.caps,
+					   PT_CAP_single_range_output))
+			return 1;
+		if (data & MSR_IA32_RTIT_OUTPUT_BASE_MASK)
 			return 1;
 		vmx->pt_desc.guest.output_base = data;
 		break;
 	case MSR_IA32_RTIT_OUTPUT_MASK:
-		if ((pt_mode != PT_MODE_HOST_GUEST) ||
-			(vmx->pt_desc.guest.ctl & RTIT_CTL_TRACEEN) ||
-			(!intel_pt_validate_cap(vmx->pt_desc.caps,
-					PT_CAP_topa_output) &&
-			 !intel_pt_validate_cap(vmx->pt_desc.caps,
-					PT_CAP_single_range_output)))
+		if (!pt_can_write_msr(vmx))
+			return 1;
+		if (!intel_pt_validate_cap(vmx->pt_desc.caps,
+					   PT_CAP_topa_output) &&
+		    !intel_pt_validate_cap(vmx->pt_desc.caps,
+					   PT_CAP_single_range_output))
 			return 1;
 		vmx->pt_desc.guest.output_mask = data;
 		break;
 	case MSR_IA32_RTIT_ADDR0_A ... MSR_IA32_RTIT_ADDR3_B:
+		if (!pt_can_write_msr(vmx))
+			return 1;
 		index = msr_info->index - MSR_IA32_RTIT_ADDR0_A;
-		if ((pt_mode != PT_MODE_HOST_GUEST) ||
-			(vmx->pt_desc.guest.ctl & RTIT_CTL_TRACEEN) ||
-			(index >= 2 * intel_pt_validate_cap(vmx->pt_desc.caps,
-					PT_CAP_num_address_ranges)))
+		if (index >= 2 * intel_pt_validate_cap(vmx->pt_desc.caps,
+						       PT_CAP_num_address_ranges))
+			return 1;
+		if (is_noncanonical_address(data, vcpu))
 			return 1;
 		if (index % 2)
 			vmx->pt_desc.guest.addr_b[index / 2] = data;
@@ -2322,7 +2338,7 @@ static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf,
 	      CPU_BASED_CR3_STORE_EXITING |
 	      CPU_BASED_UNCOND_IO_EXITING |
 	      CPU_BASED_MOV_DR_EXITING |
-	      CPU_BASED_USE_TSC_OFFSETING |
+	      CPU_BASED_USE_TSC_OFFSETTING |
 	      CPU_BASED_MWAIT_EXITING |
 	      CPU_BASED_MONITOR_EXITING |
 	      CPU_BASED_INVLPG_EXITING |
@@ -2657,8 +2673,6 @@ static void enter_pmode(struct kvm_vcpu *vcpu)
 
 	vmx->rmode.vm86_active = 0;
 
-	vmx_segment_cache_clear(vmx);
-
 	vmx_set_segment(vcpu, &vmx->rmode.segs[VCPU_SREG_TR], VCPU_SREG_TR);
 
 	flags = vmcs_readl(GUEST_RFLAGS);
@@ -3444,7 +3458,7 @@ out:
 static int init_rmode_identity_map(struct kvm *kvm)
 {
 	struct kvm_vmx *kvm_vmx = to_kvm_vmx(kvm);
-	int i, idx, r = 0;
+	int i, r = 0;
 	kvm_pfn_t identity_map_pfn;
 	u32 tmp;
 
@@ -3452,7 +3466,7 @@ static int init_rmode_identity_map(struct kvm *kvm)
 	mutex_lock(&kvm->slots_lock);
 
 	if (likely(kvm_vmx->ept_identity_pagetable_done))
-		goto out2;
+		goto out;
 
 	if (!kvm_vmx->ept_identity_map_addr)
 		kvm_vmx->ept_identity_map_addr = VMX_EPT_IDENTITY_PAGETABLE_ADDR;
@@ -3461,9 +3475,8 @@ static int init_rmode_identity_map(struct kvm *kvm)
 	r = __x86_set_memory_region(kvm, IDENTITY_PAGETABLE_PRIVATE_MEMSLOT,
 				    kvm_vmx->ept_identity_map_addr, PAGE_SIZE);
 	if (r < 0)
-		goto out2;
+		goto out;
 
-	idx = srcu_read_lock(&kvm->srcu);
 	r = kvm_clear_guest_page(kvm, identity_map_pfn, 0, PAGE_SIZE);
 	if (r < 0)
 		goto out;
@@ -3479,9 +3492,6 @@ static int init_rmode_identity_map(struct kvm *kvm)
 	kvm_vmx->ept_identity_pagetable_done = true;
 
 out:
-	srcu_read_unlock(&kvm->srcu, idx);
-
-out2:
 	mutex_unlock(&kvm->slots_lock);
 	return r;
 }
@@ -3719,11 +3729,6 @@ void pt_update_intercept_for_msr(struct vcpu_vmx *vmx)
 	}
 }
 
-static bool vmx_get_enable_apicv(struct kvm *kvm)
-{
-	return enable_apicv;
-}
-
 static bool vmx_guest_apic_has_interrupt(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
@@ -4009,6 +4014,7 @@ static void vmx_compute_secondary_exec_control(struct vcpu_vmx *vmx)
 	if (vmx_xsaves_supported()) {
 		/* Exposing XSAVES only when XSAVE is exposed */
 		bool xsaves_enabled =
+			boot_cpu_has(X86_FEATURE_XSAVE) &&
 			guest_cpuid_has(vcpu, X86_FEATURE_XSAVE) &&
 			guest_cpuid_has(vcpu, X86_FEATURE_XSAVES);
 
@@ -4319,7 +4325,7 @@ static void vmx_vcpu_reset(struct kvm_vcpu *vcpu, bool init_event)
 
 static void enable_irq_window(struct kvm_vcpu *vcpu)
 {
-	exec_controls_setbit(to_vmx(vcpu), CPU_BASED_VIRTUAL_INTR_PENDING);
+	exec_controls_setbit(to_vmx(vcpu), CPU_BASED_INTR_WINDOW_EXITING);
 }
 
 static void enable_nmi_window(struct kvm_vcpu *vcpu)
@@ -4330,7 +4336,7 @@ static void enable_nmi_window(struct kvm_vcpu *vcpu)
 		return;
 	}
 
-	exec_controls_setbit(to_vmx(vcpu), CPU_BASED_VIRTUAL_NMI_PENDING);
+	exec_controls_setbit(to_vmx(vcpu), CPU_BASED_NMI_WINDOW_EXITING);
 }
 
 static void vmx_inject_irq(struct kvm_vcpu *vcpu)
@@ -4455,8 +4461,11 @@ static int vmx_set_tss_addr(struct kvm *kvm, unsigned int addr)
 	if (enable_unrestricted_guest)
 		return 0;
 
-	ret = x86_set_memory_region(kvm, TSS_PRIVATE_MEMSLOT, addr,
-				    PAGE_SIZE * 3);
+	mutex_lock(&kvm->slots_lock);
+	ret = __x86_set_memory_region(kvm, TSS_PRIVATE_MEMSLOT, addr,
+				      PAGE_SIZE * 3);
+	mutex_unlock(&kvm->slots_lock);
+
 	if (ret)
 		return ret;
 	to_kvm_vmx(kvm)->tss_addr = addr;
@@ -4938,7 +4947,7 @@ static int handle_tpr_below_threshold(struct kvm_vcpu *vcpu)
 
 static int handle_interrupt_window(struct kvm_vcpu *vcpu)
 {
-	exec_controls_clearbit(to_vmx(vcpu), CPU_BASED_VIRTUAL_INTR_PENDING);
+	exec_controls_clearbit(to_vmx(vcpu), CPU_BASED_INTR_WINDOW_EXITING);
 
 	kvm_make_request(KVM_REQ_EVENT, vcpu);
 
@@ -5151,7 +5160,7 @@ static int handle_ept_misconfig(struct kvm_vcpu *vcpu)
 static int handle_nmi_window(struct kvm_vcpu *vcpu)
 {
 	WARN_ON_ONCE(!enable_vnmi);
-	exec_controls_clearbit(to_vmx(vcpu), CPU_BASED_VIRTUAL_NMI_PENDING);
+	exec_controls_clearbit(to_vmx(vcpu), CPU_BASED_NMI_WINDOW_EXITING);
 	++vcpu->stat.nmi_window_exits;
 	kvm_make_request(KVM_REQ_EVENT, vcpu);
 
@@ -5172,7 +5181,7 @@ static int handle_invalid_guest_state(struct kvm_vcpu *vcpu)
 	WARN_ON_ONCE(vmx->emulation_required && vmx->nested.nested_run_pending);
 
 	intr_window_requested = exec_controls_get(vmx) &
-				CPU_BASED_VIRTUAL_INTR_PENDING;
+				CPU_BASED_INTR_WINDOW_EXITING;
 
 	while (vmx->emulation_required && count-- != 0) {
 		if (intr_window_requested && vmx_interrupt_allowed(vcpu))
@@ -5496,7 +5505,7 @@ static int (*kvm_vmx_exit_handlers[])(struct kvm_vcpu *vcpu) = {
 	[EXIT_REASON_CPUID]                   = kvm_emulate_cpuid,
 	[EXIT_REASON_MSR_READ]                = kvm_emulate_rdmsr,
 	[EXIT_REASON_MSR_WRITE]               = kvm_emulate_wrmsr,
-	[EXIT_REASON_PENDING_INTERRUPT]       = handle_interrupt_window,
+	[EXIT_REASON_INTERRUPT_WINDOW]        = handle_interrupt_window,
 	[EXIT_REASON_HLT]                     = kvm_emulate_halt,
 	[EXIT_REASON_INVD]		      = handle_invd,
 	[EXIT_REASON_INVLPG]		      = handle_invlpg,
@@ -5783,7 +5792,8 @@ void dump_vmcs(void)
  * The guest has exited.  See if we can fix it or if we need userspace
  * assistance.
  */
-static int vmx_handle_exit(struct kvm_vcpu *vcpu)
+static int vmx_handle_exit(struct kvm_vcpu *vcpu,
+	enum exit_fastpath_completion exit_fastpath)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
 	u32 exit_reason = vmx->exit_reason;
@@ -5869,34 +5879,44 @@ static int vmx_handle_exit(struct kvm_vcpu *vcpu)
 		}
 	}
 
-	if (exit_reason < kvm_vmx_max_exit_handlers
-	    && kvm_vmx_exit_handlers[exit_reason]) {
+	if (exit_fastpath == EXIT_FASTPATH_SKIP_EMUL_INS) {
+		kvm_skip_emulated_instruction(vcpu);
+		return 1;
+	}
+
+	if (exit_reason >= kvm_vmx_max_exit_handlers)
+		goto unexpected_vmexit;
 #ifdef CONFIG_RETPOLINE
-		if (exit_reason == EXIT_REASON_MSR_WRITE)
-			return kvm_emulate_wrmsr(vcpu);
-		else if (exit_reason == EXIT_REASON_PREEMPTION_TIMER)
-			return handle_preemption_timer(vcpu);
-		else if (exit_reason == EXIT_REASON_PENDING_INTERRUPT)
-			return handle_interrupt_window(vcpu);
-		else if (exit_reason == EXIT_REASON_EXTERNAL_INTERRUPT)
-			return handle_external_interrupt(vcpu);
-		else if (exit_reason == EXIT_REASON_HLT)
-			return kvm_emulate_halt(vcpu);
-		else if (exit_reason == EXIT_REASON_EPT_MISCONFIG)
-			return handle_ept_misconfig(vcpu);
+	if (exit_reason == EXIT_REASON_MSR_WRITE)
+		return kvm_emulate_wrmsr(vcpu);
+	else if (exit_reason == EXIT_REASON_PREEMPTION_TIMER)
+		return handle_preemption_timer(vcpu);
+	else if (exit_reason == EXIT_REASON_INTERRUPT_WINDOW)
+		return handle_interrupt_window(vcpu);
+	else if (exit_reason == EXIT_REASON_EXTERNAL_INTERRUPT)
+		return handle_external_interrupt(vcpu);
+	else if (exit_reason == EXIT_REASON_HLT)
+		return kvm_emulate_halt(vcpu);
+	else if (exit_reason == EXIT_REASON_EPT_MISCONFIG)
+		return handle_ept_misconfig(vcpu);
 #endif
-		return kvm_vmx_exit_handlers[exit_reason](vcpu);
-	} else {
-		vcpu_unimpl(vcpu, "vmx: unexpected exit reason 0x%x\n",
-				exit_reason);
-		dump_vmcs();
-		vcpu->run->exit_reason = KVM_EXIT_INTERNAL_ERROR;
-		vcpu->run->internal.suberror =
+
+	exit_reason = array_index_nospec(exit_reason,
+					 kvm_vmx_max_exit_handlers);
+	if (!kvm_vmx_exit_handlers[exit_reason])
+		goto unexpected_vmexit;
+
+	return kvm_vmx_exit_handlers[exit_reason](vcpu);
+
+unexpected_vmexit:
+	vcpu_unimpl(vcpu, "vmx: unexpected exit reason 0x%x\n", exit_reason);
+	dump_vmcs();
+	vcpu->run->exit_reason = KVM_EXIT_INTERNAL_ERROR;
+	vcpu->run->internal.suberror =
 			KVM_INTERNAL_ERROR_UNEXPECTED_EXIT_REASON;
-		vcpu->run->internal.ndata = 1;
-		vcpu->run->internal.data[0] = exit_reason;
-		return 0;
-	}
+	vcpu->run->internal.ndata = 1;
+	vcpu->run->internal.data[0] = exit_reason;
+	return 0;
 }
 
 /*
@@ -6217,7 +6237,8 @@ static void handle_external_interrupt_irqoff(struct kvm_vcpu *vcpu)
 }
 STACK_FRAME_NON_STANDARD(handle_external_interrupt_irqoff);
 
-static void vmx_handle_exit_irqoff(struct kvm_vcpu *vcpu)
+static void vmx_handle_exit_irqoff(struct kvm_vcpu *vcpu,
+	enum exit_fastpath_completion *exit_fastpath)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
 
@@ -6225,6 +6246,9 @@ static void vmx_handle_exit_irqoff(struct kvm_vcpu *vcpu)
 		handle_external_interrupt_irqoff(vcpu);
 	else if (vmx->exit_reason == EXIT_REASON_EXCEPTION_NMI)
 		handle_exception_nmi_irqoff(vmx);
+	else if (!is_guest_mode(vcpu) &&
+		vmx->exit_reason == EXIT_REASON_MSR_WRITE)
+		*exit_fastpath = handle_fastpath_set_msr_irqoff(vcpu);
 }
 
 static bool vmx_has_emulated_msr(int index)
@@ -6633,60 +6657,31 @@ static void vmx_free_vcpu(struct kvm_vcpu *vcpu)
 	free_vpid(vmx->vpid);
 	nested_vmx_free_vcpu(vcpu);
 	free_loaded_vmcs(vmx->loaded_vmcs);
-	kvm_vcpu_uninit(vcpu);
-	kmem_cache_free(x86_fpu_cache, vmx->vcpu.arch.user_fpu);
-	kmem_cache_free(x86_fpu_cache, vmx->vcpu.arch.guest_fpu);
-	kmem_cache_free(kvm_vcpu_cache, vmx);
 }
 
-static struct kvm_vcpu *vmx_create_vcpu(struct kvm *kvm, unsigned int id)
+static int vmx_create_vcpu(struct kvm_vcpu *vcpu)
 {
-	int err;
 	struct vcpu_vmx *vmx;
 	unsigned long *msr_bitmap;
-	int i, cpu;
+	int i, cpu, err;
 
-	BUILD_BUG_ON_MSG(offsetof(struct vcpu_vmx, vcpu) != 0,
-		"struct kvm_vcpu must be at offset 0 for arch usercopy region");
-
-	vmx = kmem_cache_zalloc(kvm_vcpu_cache, GFP_KERNEL_ACCOUNT);
-	if (!vmx)
-		return ERR_PTR(-ENOMEM);
-
-	vmx->vcpu.arch.user_fpu = kmem_cache_zalloc(x86_fpu_cache,
-			GFP_KERNEL_ACCOUNT);
-	if (!vmx->vcpu.arch.user_fpu) {
-		printk(KERN_ERR "kvm: failed to allocate kvm userspace's fpu\n");
-		err = -ENOMEM;
-		goto free_partial_vcpu;
-	}
+	BUILD_BUG_ON(offsetof(struct vcpu_vmx, vcpu) != 0);
+	vmx = to_vmx(vcpu);
 
-	vmx->vcpu.arch.guest_fpu = kmem_cache_zalloc(x86_fpu_cache,
-			GFP_KERNEL_ACCOUNT);
-	if (!vmx->vcpu.arch.guest_fpu) {
-		printk(KERN_ERR "kvm: failed to allocate vcpu's fpu\n");
-		err = -ENOMEM;
-		goto free_user_fpu;
-	}
+	err = -ENOMEM;
 
 	vmx->vpid = allocate_vpid();
 
-	err = kvm_vcpu_init(&vmx->vcpu, kvm, id);
-	if (err)
-		goto free_vcpu;
-
-	err = -ENOMEM;
-
 	/*
 	 * If PML is turned on, failure on enabling PML just results in failure
 	 * of creating the vcpu, therefore we can simplify PML logic (by
 	 * avoiding dealing with cases, such as enabling PML partially on vcpus
-	 * for the guest, etc.
+	 * for the guest), etc.
 	 */
 	if (enable_pml) {
 		vmx->pml_pg = alloc_page(GFP_KERNEL_ACCOUNT | __GFP_ZERO);
 		if (!vmx->pml_pg)
-			goto uninit_vcpu;
+			goto free_vpid;
 	}
 
 	BUILD_BUG_ON(ARRAY_SIZE(vmx_msr_index) != NR_SHARED_MSRS);
@@ -6731,7 +6726,7 @@ static struct kvm_vcpu *vmx_create_vcpu(struct kvm *kvm, unsigned int id)
 	vmx_disable_intercept_for_msr(msr_bitmap, MSR_IA32_SYSENTER_CS, MSR_TYPE_RW);
 	vmx_disable_intercept_for_msr(msr_bitmap, MSR_IA32_SYSENTER_ESP, MSR_TYPE_RW);
 	vmx_disable_intercept_for_msr(msr_bitmap, MSR_IA32_SYSENTER_EIP, MSR_TYPE_RW);
-	if (kvm_cstate_in_guest(kvm)) {
+	if (kvm_cstate_in_guest(vcpu->kvm)) {
 		vmx_disable_intercept_for_msr(msr_bitmap, MSR_CORE_C1_RES, MSR_TYPE_R);
 		vmx_disable_intercept_for_msr(msr_bitmap, MSR_CORE_C3_RESIDENCY, MSR_TYPE_R);
 		vmx_disable_intercept_for_msr(msr_bitmap, MSR_CORE_C6_RESIDENCY, MSR_TYPE_R);
@@ -6741,19 +6736,19 @@ static struct kvm_vcpu *vmx_create_vcpu(struct kvm *kvm, unsigned int id)
 
 	vmx->loaded_vmcs = &vmx->vmcs01;
 	cpu = get_cpu();
-	vmx_vcpu_load(&vmx->vcpu, cpu);
-	vmx->vcpu.cpu = cpu;
+	vmx_vcpu_load(vcpu, cpu);
+	vcpu->cpu = cpu;
 	init_vmcs(vmx);
-	vmx_vcpu_put(&vmx->vcpu);
+	vmx_vcpu_put(vcpu);
 	put_cpu();
-	if (cpu_need_virtualize_apic_accesses(&vmx->vcpu)) {
-		err = alloc_apic_access_page(kvm);
+	if (cpu_need_virtualize_apic_accesses(vcpu)) {
+		err = alloc_apic_access_page(vcpu->kvm);
 		if (err)
 			goto free_vmcs;
 	}
 
 	if (enable_ept && !enable_unrestricted_guest) {
-		err = init_rmode_identity_map(kvm);
+		err = init_rmode_identity_map(vcpu->kvm);
 		if (err)
 			goto free_vmcs;
 	}
@@ -6761,7 +6756,7 @@ static struct kvm_vcpu *vmx_create_vcpu(struct kvm *kvm, unsigned int id)
 	if (nested)
 		nested_vmx_setup_ctls_msrs(&vmx->nested.msrs,
 					   vmx_capability.ept,
-					   kvm_vcpu_apicv_active(&vmx->vcpu));
+					   kvm_vcpu_apicv_active(vcpu));
 	else
 		memset(&vmx->nested.msrs, 0, sizeof(vmx->nested.msrs));
 
@@ -6779,22 +6774,15 @@ static struct kvm_vcpu *vmx_create_vcpu(struct kvm *kvm, unsigned int id)
 
 	vmx->ept_pointer = INVALID_PAGE;
 
-	return &vmx->vcpu;
+	return 0;
 
 free_vmcs:
 	free_loaded_vmcs(vmx->loaded_vmcs);
 free_pml:
 	vmx_destroy_pml_buffer(vmx);
-uninit_vcpu:
-	kvm_vcpu_uninit(&vmx->vcpu);
-free_vcpu:
+free_vpid:
 	free_vpid(vmx->vpid);
-	kmem_cache_free(x86_fpu_cache, vmx->vcpu.arch.guest_fpu);
-free_user_fpu:
-	kmem_cache_free(x86_fpu_cache, vmx->vcpu.arch.user_fpu);
-free_partial_vcpu:
-	kmem_cache_free(kvm_vcpu_cache, vmx);
-	return ERR_PTR(err);
+	return err;
 }
 
 #define L1TF_MSG_SMT "L1TF CPU bug present and SMT on, data leak possible. See CVE-2018-3646 and https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/l1tf.html for details.\n"
@@ -6830,6 +6818,7 @@ static int vmx_vm_init(struct kvm *kvm)
 			break;
 		}
 	}
+	kvm_apicv_init(kvm, enable_apicv);
 	return 0;
 }
 
@@ -6946,28 +6935,28 @@ static void nested_vmx_cr_fixed1_bits_update(struct kvm_vcpu *vcpu)
 } while (0)
 
 	entry = kvm_find_cpuid_entry(vcpu, 0x1, 0);
-	cr4_fixed1_update(X86_CR4_VME,        edx, bit(X86_FEATURE_VME));
-	cr4_fixed1_update(X86_CR4_PVI,        edx, bit(X86_FEATURE_VME));
-	cr4_fixed1_update(X86_CR4_TSD,        edx, bit(X86_FEATURE_TSC));
-	cr4_fixed1_update(X86_CR4_DE,         edx, bit(X86_FEATURE_DE));
-	cr4_fixed1_update(X86_CR4_PSE,        edx, bit(X86_FEATURE_PSE));
-	cr4_fixed1_update(X86_CR4_PAE,        edx, bit(X86_FEATURE_PAE));
-	cr4_fixed1_update(X86_CR4_MCE,        edx, bit(X86_FEATURE_MCE));
-	cr4_fixed1_update(X86_CR4_PGE,        edx, bit(X86_FEATURE_PGE));
-	cr4_fixed1_update(X86_CR4_OSFXSR,     edx, bit(X86_FEATURE_FXSR));
-	cr4_fixed1_update(X86_CR4_OSXMMEXCPT, edx, bit(X86_FEATURE_XMM));
-	cr4_fixed1_update(X86_CR4_VMXE,       ecx, bit(X86_FEATURE_VMX));
-	cr4_fixed1_update(X86_CR4_SMXE,       ecx, bit(X86_FEATURE_SMX));
-	cr4_fixed1_update(X86_CR4_PCIDE,      ecx, bit(X86_FEATURE_PCID));
-	cr4_fixed1_update(X86_CR4_OSXSAVE,    ecx, bit(X86_FEATURE_XSAVE));
+	cr4_fixed1_update(X86_CR4_VME,        edx, feature_bit(VME));
+	cr4_fixed1_update(X86_CR4_PVI,        edx, feature_bit(VME));
+	cr4_fixed1_update(X86_CR4_TSD,        edx, feature_bit(TSC));
+	cr4_fixed1_update(X86_CR4_DE,         edx, feature_bit(DE));
+	cr4_fixed1_update(X86_CR4_PSE,        edx, feature_bit(PSE));
+	cr4_fixed1_update(X86_CR4_PAE,        edx, feature_bit(PAE));
+	cr4_fixed1_update(X86_CR4_MCE,        edx, feature_bit(MCE));
+	cr4_fixed1_update(X86_CR4_PGE,        edx, feature_bit(PGE));
+	cr4_fixed1_update(X86_CR4_OSFXSR,     edx, feature_bit(FXSR));
+	cr4_fixed1_update(X86_CR4_OSXMMEXCPT, edx, feature_bit(XMM));
+	cr4_fixed1_update(X86_CR4_VMXE,       ecx, feature_bit(VMX));
+	cr4_fixed1_update(X86_CR4_SMXE,       ecx, feature_bit(SMX));
+	cr4_fixed1_update(X86_CR4_PCIDE,      ecx, feature_bit(PCID));
+	cr4_fixed1_update(X86_CR4_OSXSAVE,    ecx, feature_bit(XSAVE));
 
 	entry = kvm_find_cpuid_entry(vcpu, 0x7, 0);
-	cr4_fixed1_update(X86_CR4_FSGSBASE,   ebx, bit(X86_FEATURE_FSGSBASE));
-	cr4_fixed1_update(X86_CR4_SMEP,       ebx, bit(X86_FEATURE_SMEP));
-	cr4_fixed1_update(X86_CR4_SMAP,       ebx, bit(X86_FEATURE_SMAP));
-	cr4_fixed1_update(X86_CR4_PKE,        ecx, bit(X86_FEATURE_PKU));
-	cr4_fixed1_update(X86_CR4_UMIP,       ecx, bit(X86_FEATURE_UMIP));
-	cr4_fixed1_update(X86_CR4_LA57,       ecx, bit(X86_FEATURE_LA57));
+	cr4_fixed1_update(X86_CR4_FSGSBASE,   ebx, feature_bit(FSGSBASE));
+	cr4_fixed1_update(X86_CR4_SMEP,       ebx, feature_bit(SMEP));
+	cr4_fixed1_update(X86_CR4_SMAP,       ebx, feature_bit(SMAP));
+	cr4_fixed1_update(X86_CR4_PKE,        ecx, feature_bit(PKU));
+	cr4_fixed1_update(X86_CR4_UMIP,       ecx, feature_bit(UMIP));
+	cr4_fixed1_update(X86_CR4_LA57,       ecx, feature_bit(LA57));
 
 #undef cr4_fixed1_update
 }
@@ -7101,7 +7090,7 @@ static void vmx_cpuid_update(struct kvm_vcpu *vcpu)
 static void vmx_set_supported_cpuid(u32 func, struct kvm_cpuid_entry2 *entry)
 {
 	if (func == 1 && nested)
-		entry->ecx |= bit(X86_FEATURE_VMX);
+		entry->ecx |= feature_bit(VMX);
 }
 
 static void vmx_request_immediate_exit(struct kvm_vcpu *vcpu)
@@ -7731,6 +7720,14 @@ static __exit void hardware_unsetup(void)
 	free_kvm_area();
 }
 
+static bool vmx_check_apicv_inhibit_reasons(ulong bit)
+{
+	ulong supported = BIT(APICV_INHIBIT_REASON_DISABLE) |
+			  BIT(APICV_INHIBIT_REASON_HYPERV);
+
+	return supported & BIT(bit);
+}
+
 static struct kvm_x86_ops vmx_x86_ops __ro_after_init = {
 	.cpu_has_kvm_support = cpu_has_kvm_support,
 	.disabled_by_bios = vmx_disabled_by_bios,
@@ -7803,10 +7800,10 @@ static struct kvm_x86_ops vmx_x86_ops __ro_after_init = {
 	.update_cr8_intercept = update_cr8_intercept,
 	.set_virtual_apic_mode = vmx_set_virtual_apic_mode,
 	.set_apic_access_page_addr = vmx_set_apic_access_page_addr,
-	.get_enable_apicv = vmx_get_enable_apicv,
 	.refresh_apicv_exec_ctrl = vmx_refresh_apicv_exec_ctrl,
 	.load_eoi_exitmap = vmx_load_eoi_exitmap,
 	.apicv_post_state_restore = vmx_apicv_post_state_restore,
+	.check_apicv_inhibit_reasons = vmx_check_apicv_inhibit_reasons,
 	.hwapic_irr_update = vmx_hwapic_irr_update,
 	.hwapic_isr_update = vmx_hwapic_isr_update,
 	.guest_apic_has_interrupt = vmx_guest_apic_has_interrupt,
@@ -7843,6 +7840,7 @@ static struct kvm_x86_ops vmx_x86_ops __ro_after_init = {
 	.xsaves_supported = vmx_xsaves_supported,
 	.umip_emulated = vmx_umip_emulated,
 	.pt_supported = vmx_pt_supported,
+	.pku_supported = vmx_pku_supported,
 
 	.request_immediate_exit = vmx_request_immediate_exit,
 
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 740d3ee42455..fbabb2f06273 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -26,6 +26,7 @@
 #include "cpuid.h"
 #include "pmu.h"
 #include "hyperv.h"
+#include "lapic.h"
 
 #include <linux/clocksource.h>
 #include <linux/interrupt.h>
@@ -93,6 +94,8 @@ u64 __read_mostly efer_reserved_bits = ~((u64)(EFER_SCE | EFER_LME | EFER_LMA));
 static u64 __read_mostly efer_reserved_bits = ~((u64)EFER_SCE);
 #endif
 
+static u64 __read_mostly cr4_reserved_bits = CR4_RESERVED_BITS;
+
 #define VM_STAT(x, ...) offsetof(struct kvm, stat.x), KVM_STAT_VM, ## __VA_ARGS__
 #define VCPU_STAT(x, ...) offsetof(struct kvm_vcpu, stat.x), KVM_STAT_VCPU, ## __VA_ARGS__
 
@@ -879,30 +882,46 @@ int kvm_set_xcr(struct kvm_vcpu *vcpu, u32 index, u64 xcr)
 }
 EXPORT_SYMBOL_GPL(kvm_set_xcr);
 
-static int kvm_valid_cr4(struct kvm_vcpu *vcpu, unsigned long cr4)
-{
-	if (cr4 & CR4_RESERVED_BITS)
-		return -EINVAL;
-
-	if (!guest_cpuid_has(vcpu, X86_FEATURE_XSAVE) && (cr4 & X86_CR4_OSXSAVE))
-		return -EINVAL;
+#define __cr4_reserved_bits(__cpu_has, __c)		\
+({							\
+	u64 __reserved_bits = CR4_RESERVED_BITS;	\
+							\
+	if (!__cpu_has(__c, X86_FEATURE_XSAVE))		\
+		__reserved_bits |= X86_CR4_OSXSAVE;	\
+	if (!__cpu_has(__c, X86_FEATURE_SMEP))		\
+		__reserved_bits |= X86_CR4_SMEP;	\
+	if (!__cpu_has(__c, X86_FEATURE_SMAP))		\
+		__reserved_bits |= X86_CR4_SMAP;	\
+	if (!__cpu_has(__c, X86_FEATURE_FSGSBASE))	\
+		__reserved_bits |= X86_CR4_FSGSBASE;	\
+	if (!__cpu_has(__c, X86_FEATURE_PKU))		\
+		__reserved_bits |= X86_CR4_PKE;		\
+	if (!__cpu_has(__c, X86_FEATURE_LA57))		\
+		__reserved_bits |= X86_CR4_LA57;	\
+	if (!__cpu_has(__c, X86_FEATURE_UMIP))		\
+		__reserved_bits |= X86_CR4_UMIP;	\
+	__reserved_bits;				\
+})
 
-	if (!guest_cpuid_has(vcpu, X86_FEATURE_SMEP) && (cr4 & X86_CR4_SMEP))
-		return -EINVAL;
+static u64 kvm_host_cr4_reserved_bits(struct cpuinfo_x86 *c)
+{
+	u64 reserved_bits = __cr4_reserved_bits(cpu_has, c);
 
-	if (!guest_cpuid_has(vcpu, X86_FEATURE_SMAP) && (cr4 & X86_CR4_SMAP))
-		return -EINVAL;
+	if (cpuid_ecx(0x7) & feature_bit(LA57))
+		reserved_bits &= ~X86_CR4_LA57;
 
-	if (!guest_cpuid_has(vcpu, X86_FEATURE_FSGSBASE) && (cr4 & X86_CR4_FSGSBASE))
-		return -EINVAL;
+	if (kvm_x86_ops->umip_emulated())
+		reserved_bits &= ~X86_CR4_UMIP;
 
-	if (!guest_cpuid_has(vcpu, X86_FEATURE_PKU) && (cr4 & X86_CR4_PKE))
-		return -EINVAL;
+	return reserved_bits;
+}
 
-	if (!guest_cpuid_has(vcpu, X86_FEATURE_LA57) && (cr4 & X86_CR4_LA57))
+static int kvm_valid_cr4(struct kvm_vcpu *vcpu, unsigned long cr4)
+{
+	if (cr4 & cr4_reserved_bits)
 		return -EINVAL;
 
-	if (!guest_cpuid_has(vcpu, X86_FEATURE_UMIP) && (cr4 & X86_CR4_UMIP))
+	if (cr4 & __cr4_reserved_bits(guest_cpuid_has, vcpu))
 		return -EINVAL;
 
 	return 0;
@@ -1047,9 +1066,11 @@ static u64 kvm_dr6_fixed(struct kvm_vcpu *vcpu)
 
 static int __kvm_set_dr(struct kvm_vcpu *vcpu, int dr, unsigned long val)
 {
+	size_t size = ARRAY_SIZE(vcpu->arch.db);
+
 	switch (dr) {
 	case 0 ... 3:
-		vcpu->arch.db[dr] = val;
+		vcpu->arch.db[array_index_nospec(dr, size)] = val;
 		if (!(vcpu->guest_debug & KVM_GUESTDBG_USE_HW_BP))
 			vcpu->arch.eff_db[dr] = val;
 		break;
@@ -1064,7 +1085,7 @@ static int __kvm_set_dr(struct kvm_vcpu *vcpu, int dr, unsigned long val)
 	case 5:
 		/* fall through */
 	default: /* 7 */
-		if (val & 0xffffffff00000000ULL)
+		if (!kvm_dr7_valid(val))
 			return -1; /* #GP */
 		vcpu->arch.dr7 = (val & DR7_VOLATILE) | DR7_FIXED_1;
 		kvm_update_dr7(vcpu);
@@ -1086,9 +1107,11 @@ EXPORT_SYMBOL_GPL(kvm_set_dr);
 
 int kvm_get_dr(struct kvm_vcpu *vcpu, int dr, unsigned long *val)
 {
+	size_t size = ARRAY_SIZE(vcpu->arch.db);
+
 	switch (dr) {
 	case 0 ... 3:
-		*val = vcpu->arch.db[dr];
+		*val = vcpu->arch.db[array_index_nospec(dr, size)];
 		break;
 	case 4:
 		/* fall through */
@@ -1212,6 +1235,7 @@ static const u32 emulated_msrs_all[] = {
 	MSR_MISC_FEATURES_ENABLES,
 	MSR_AMD64_VIRT_SPEC_CTRL,
 	MSR_IA32_POWER_CTL,
+	MSR_IA32_UCODE_REV,
 
 	/*
 	 * The following list leaves out MSRs whose values are determined
@@ -1526,6 +1550,49 @@ int kvm_emulate_wrmsr(struct kvm_vcpu *vcpu)
 EXPORT_SYMBOL_GPL(kvm_emulate_wrmsr);
 
 /*
+ * The fast path for frequent and performance sensitive wrmsr emulation,
+ * i.e. the sending of IPI, sending IPI early in the VM-Exit flow reduces
+ * the latency of virtual IPI by avoiding the expensive bits of transitioning
+ * from guest to host, e.g. reacquiring KVM's SRCU lock. In contrast to the
+ * other cases which must be called after interrupts are enabled on the host.
+ */
+static int handle_fastpath_set_x2apic_icr_irqoff(struct kvm_vcpu *vcpu, u64 data)
+{
+	if (lapic_in_kernel(vcpu) && apic_x2apic_mode(vcpu->arch.apic) &&
+		((data & APIC_DEST_MASK) == APIC_DEST_PHYSICAL) &&
+		((data & APIC_MODE_MASK) == APIC_DM_FIXED)) {
+
+		kvm_lapic_set_reg(vcpu->arch.apic, APIC_ICR2, (u32)(data >> 32));
+		return kvm_lapic_reg_write(vcpu->arch.apic, APIC_ICR, (u32)data);
+	}
+
+	return 1;
+}
+
+enum exit_fastpath_completion handle_fastpath_set_msr_irqoff(struct kvm_vcpu *vcpu)
+{
+	u32 msr = kvm_rcx_read(vcpu);
+	u64 data = kvm_read_edx_eax(vcpu);
+	int ret = 0;
+
+	switch (msr) {
+	case APIC_BASE_MSR + (APIC_ICR >> 4):
+		ret = handle_fastpath_set_x2apic_icr_irqoff(vcpu, data);
+		break;
+	default:
+		return EXIT_FASTPATH_NONE;
+	}
+
+	if (!ret) {
+		trace_kvm_msr_write(msr, data);
+		return EXIT_FASTPATH_SKIP_EMUL_INS;
+	}
+
+	return EXIT_FASTPATH_NONE;
+}
+EXPORT_SYMBOL_GPL(handle_fastpath_set_msr_irqoff);
+
+/*
  * Adapt set_msr() to msr_io()'s calling convention
  */
 static int do_get_msr(struct kvm_vcpu *vcpu, unsigned index, u64 *data)
@@ -1545,6 +1612,8 @@ struct pvclock_clock {
 	u64 mask;
 	u32 mult;
 	u32 shift;
+	u64 base_cycles;
+	u64 offset;
 };
 
 struct pvclock_gtod_data {
@@ -1553,11 +1622,8 @@ struct pvclock_gtod_data {
 	struct pvclock_clock clock; /* extract of a clocksource struct */
 	struct pvclock_clock raw_clock; /* extract of a clocksource struct */
 
-	u64		boot_ns_raw;
-	u64		boot_ns;
-	u64		nsec_base;
+	ktime_t		offs_boot;
 	u64		wall_time_sec;
-	u64		monotonic_raw_nsec;
 };
 
 static struct pvclock_gtod_data pvclock_gtod_data;
@@ -1565,10 +1631,6 @@ static struct pvclock_gtod_data pvclock_gtod_data;
 static void update_pvclock_gtod(struct timekeeper *tk)
 {
 	struct pvclock_gtod_data *vdata = &pvclock_gtod_data;
-	u64 boot_ns, boot_ns_raw;
-
-	boot_ns = ktime_to_ns(ktime_add(tk->tkr_mono.base, tk->offs_boot));
-	boot_ns_raw = ktime_to_ns(ktime_add(tk->tkr_raw.base, tk->offs_boot));
 
 	write_seqcount_begin(&vdata->seq);
 
@@ -1578,23 +1640,35 @@ static void update_pvclock_gtod(struct timekeeper *tk)
 	vdata->clock.mask		= tk->tkr_mono.mask;
 	vdata->clock.mult		= tk->tkr_mono.mult;
 	vdata->clock.shift		= tk->tkr_mono.shift;
+	vdata->clock.base_cycles	= tk->tkr_mono.xtime_nsec;
+	vdata->clock.offset		= tk->tkr_mono.base;
 
 	vdata->raw_clock.vclock_mode	= tk->tkr_raw.clock->archdata.vclock_mode;
 	vdata->raw_clock.cycle_last	= tk->tkr_raw.cycle_last;
 	vdata->raw_clock.mask		= tk->tkr_raw.mask;
 	vdata->raw_clock.mult		= tk->tkr_raw.mult;
 	vdata->raw_clock.shift		= tk->tkr_raw.shift;
-
-	vdata->boot_ns			= boot_ns;
-	vdata->nsec_base		= tk->tkr_mono.xtime_nsec;
+	vdata->raw_clock.base_cycles	= tk->tkr_raw.xtime_nsec;
+	vdata->raw_clock.offset		= tk->tkr_raw.base;
 
 	vdata->wall_time_sec            = tk->xtime_sec;
 
-	vdata->boot_ns_raw		= boot_ns_raw;
-	vdata->monotonic_raw_nsec	= tk->tkr_raw.xtime_nsec;
+	vdata->offs_boot		= tk->offs_boot;
 
 	write_seqcount_end(&vdata->seq);
 }
+
+static s64 get_kvmclock_base_ns(void)
+{
+	/* Count up from boot time, but with the frequency of the raw clock.  */
+	return ktime_to_ns(ktime_add(ktime_get_raw(), pvclock_gtod_data.offs_boot));
+}
+#else
+static s64 get_kvmclock_base_ns(void)
+{
+	/* Master clock not used, so we can just use CLOCK_BOOTTIME.  */
+	return ktime_get_boottime_ns();
+}
 #endif
 
 void kvm_set_pending_timer(struct kvm_vcpu *vcpu)
@@ -1608,7 +1682,7 @@ static void kvm_write_wall_clock(struct kvm *kvm, gpa_t wall_clock)
 	int version;
 	int r;
 	struct pvclock_wall_clock wc;
-	struct timespec64 boot;
+	u64 wall_nsec;
 
 	if (!wall_clock)
 		return;
@@ -1628,17 +1702,12 @@ static void kvm_write_wall_clock(struct kvm *kvm, gpa_t wall_clock)
 	/*
 	 * The guest calculates current wall clock time by adding
 	 * system time (updated by kvm_guest_time_update below) to the
-	 * wall clock specified here.  guest system time equals host
-	 * system time for us, thus we must fill in host boot time here.
+	 * wall clock specified here.  We do the reverse here.
 	 */
-	getboottime64(&boot);
+	wall_nsec = ktime_get_real_ns() - get_kvmclock_ns(kvm);
 
-	if (kvm->arch.kvmclock_offset) {
-		struct timespec64 ts = ns_to_timespec64(kvm->arch.kvmclock_offset);
-		boot = timespec64_sub(boot, ts);
-	}
-	wc.sec = (u32)boot.tv_sec; /* overflow in 2106 guest time */
-	wc.nsec = boot.tv_nsec;
+	wc.nsec = do_div(wall_nsec, 1000000000);
+	wc.sec = (u32)wall_nsec; /* overflow in 2106 guest time */
 	wc.version = version;
 
 	kvm_write_guest(kvm, wall_clock, &wc, sizeof(wc));
@@ -1886,7 +1955,7 @@ void kvm_write_tsc(struct kvm_vcpu *vcpu, struct msr_data *msr)
 
 	raw_spin_lock_irqsave(&kvm->arch.tsc_write_lock, flags);
 	offset = kvm_compute_tsc_offset(vcpu, data);
-	ns = ktime_get_boottime_ns();
+	ns = get_kvmclock_base_ns();
 	elapsed = ns - kvm->arch.last_tsc_nsec;
 
 	if (vcpu->arch.virtual_tsc_khz) {
@@ -2061,10 +2130,10 @@ static int do_monotonic_raw(s64 *t, u64 *tsc_timestamp)
 
 	do {
 		seq = read_seqcount_begin(&gtod->seq);
-		ns = gtod->monotonic_raw_nsec;
+		ns = gtod->raw_clock.base_cycles;
 		ns += vgettsc(&gtod->raw_clock, tsc_timestamp, &mode);
-		ns >>= gtod->clock.shift;
-		ns += gtod->boot_ns_raw;
+		ns >>= gtod->raw_clock.shift;
+		ns += ktime_to_ns(ktime_add(gtod->raw_clock.offset, gtod->offs_boot));
 	} while (unlikely(read_seqcount_retry(&gtod->seq, seq)));
 	*t = ns;
 
@@ -2081,7 +2150,7 @@ static int do_realtime(struct timespec64 *ts, u64 *tsc_timestamp)
 	do {
 		seq = read_seqcount_begin(&gtod->seq);
 		ts->tv_sec = gtod->wall_time_sec;
-		ns = gtod->nsec_base;
+		ns = gtod->clock.base_cycles;
 		ns += vgettsc(&gtod->clock, tsc_timestamp, &mode);
 		ns >>= gtod->clock.shift;
 	} while (unlikely(read_seqcount_retry(&gtod->seq, seq)));
@@ -2224,7 +2293,7 @@ u64 get_kvmclock_ns(struct kvm *kvm)
 	spin_lock(&ka->pvclock_gtod_sync_lock);
 	if (!ka->use_master_clock) {
 		spin_unlock(&ka->pvclock_gtod_sync_lock);
-		return ktime_get_boottime_ns() + ka->kvmclock_offset;
+		return get_kvmclock_base_ns() + ka->kvmclock_offset;
 	}
 
 	hv_clock.tsc_timestamp = ka->master_cycle_now;
@@ -2240,7 +2309,7 @@ u64 get_kvmclock_ns(struct kvm *kvm)
 				   &hv_clock.tsc_to_system_mul);
 		ret = __pvclock_read_cycles(&hv_clock, rdtsc());
 	} else
-		ret = ktime_get_boottime_ns() + ka->kvmclock_offset;
+		ret = get_kvmclock_base_ns() + ka->kvmclock_offset;
 
 	put_cpu();
 
@@ -2339,7 +2408,7 @@ static int kvm_guest_time_update(struct kvm_vcpu *v)
 	}
 	if (!use_master_clock) {
 		host_tsc = rdtsc();
-		kernel_ns = ktime_get_boottime_ns();
+		kernel_ns = get_kvmclock_base_ns();
 	}
 
 	tsc_timestamp = kvm_read_l1_tsc(v, host_tsc);
@@ -2379,6 +2448,7 @@ static int kvm_guest_time_update(struct kvm_vcpu *v)
 	vcpu->hv_clock.tsc_timestamp = tsc_timestamp;
 	vcpu->hv_clock.system_time = kernel_ns + v->kvm->arch.kvmclock_offset;
 	vcpu->last_guest_tsc = tsc_timestamp;
+	WARN_ON(vcpu->hv_clock.system_time < 0);
 
 	/* If the host uses TSC clocksource, then it is stable */
 	pvclock_flags = 0;
@@ -2485,7 +2555,10 @@ static int set_msr_mce(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 	default:
 		if (msr >= MSR_IA32_MC0_CTL &&
 		    msr < MSR_IA32_MCx_CTL(bank_num)) {
-			u32 offset = msr - MSR_IA32_MC0_CTL;
+			u32 offset = array_index_nospec(
+				msr - MSR_IA32_MC0_CTL,
+				MSR_IA32_MCx_CTL(bank_num) - MSR_IA32_MC0_CTL);
+
 			/* only 0 or all 1s can be written to IA32_MCi_CTL
 			 * some Linux kernels though clear bit 10 in bank 4 to
 			 * workaround a BIOS/GART TBL issue on AMD K8s, ignore
@@ -2581,45 +2654,47 @@ static void kvm_vcpu_flush_tlb(struct kvm_vcpu *vcpu, bool invalidate_gpa)
 
 static void record_steal_time(struct kvm_vcpu *vcpu)
 {
+	struct kvm_host_map map;
+	struct kvm_steal_time *st;
+
 	if (!(vcpu->arch.st.msr_val & KVM_MSR_ENABLED))
 		return;
 
-	if (unlikely(kvm_read_guest_cached(vcpu->kvm, &vcpu->arch.st.stime,
-		&vcpu->arch.st.steal, sizeof(struct kvm_steal_time))))
+	/* -EAGAIN is returned in atomic context so we can just return. */
+	if (kvm_map_gfn(vcpu, vcpu->arch.st.msr_val >> PAGE_SHIFT,
+			&map, &vcpu->arch.st.cache, false))
 		return;
 
+	st = map.hva +
+		offset_in_page(vcpu->arch.st.msr_val & KVM_STEAL_VALID_BITS);
+
 	/*
 	 * Doing a TLB flush here, on the guest's behalf, can avoid
 	 * expensive IPIs.
 	 */
 	trace_kvm_pv_tlb_flush(vcpu->vcpu_id,
-		vcpu->arch.st.steal.preempted & KVM_VCPU_FLUSH_TLB);
-	if (xchg(&vcpu->arch.st.steal.preempted, 0) & KVM_VCPU_FLUSH_TLB)
+		st->preempted & KVM_VCPU_FLUSH_TLB);
+	if (xchg(&st->preempted, 0) & KVM_VCPU_FLUSH_TLB)
 		kvm_vcpu_flush_tlb(vcpu, false);
 
-	if (vcpu->arch.st.steal.version & 1)
-		vcpu->arch.st.steal.version += 1;  /* first time write, random junk */
+	vcpu->arch.st.preempted = 0;
 
-	vcpu->arch.st.steal.version += 1;
+	if (st->version & 1)
+		st->version += 1;  /* first time write, random junk */
 
-	kvm_write_guest_cached(vcpu->kvm, &vcpu->arch.st.stime,
-		&vcpu->arch.st.steal, sizeof(struct kvm_steal_time));
+	st->version += 1;
 
 	smp_wmb();
 
-	vcpu->arch.st.steal.steal += current->sched_info.run_delay -
+	st->steal += current->sched_info.run_delay -
 		vcpu->arch.st.last_steal;
 	vcpu->arch.st.last_steal = current->sched_info.run_delay;
 
-	kvm_write_guest_cached(vcpu->kvm, &vcpu->arch.st.stime,
-		&vcpu->arch.st.steal, sizeof(struct kvm_steal_time));
-
 	smp_wmb();
 
-	vcpu->arch.st.steal.version += 1;
+	st->version += 1;
 
-	kvm_write_guest_cached(vcpu->kvm, &vcpu->arch.st.stime,
-		&vcpu->arch.st.steal, sizeof(struct kvm_steal_time));
+	kvm_unmap_gfn(vcpu, &map, &vcpu->arch.st.cache, true, false);
 }
 
 int kvm_set_msr_common(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
@@ -2786,11 +2861,6 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 		if (data & KVM_STEAL_RESERVED_MASK)
 			return 1;
 
-		if (kvm_gfn_to_hva_cache_init(vcpu->kvm, &vcpu->arch.st.stime,
-						data & KVM_STEAL_VALID_BITS,
-						sizeof(struct kvm_steal_time)))
-			return 1;
-
 		vcpu->arch.st.msr_val = data;
 
 		if (!(data & KVM_MSR_ENABLED))
@@ -2926,7 +2996,10 @@ static int get_msr_mce(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata, bool host)
 	default:
 		if (msr >= MSR_IA32_MC0_CTL &&
 		    msr < MSR_IA32_MCx_CTL(bank_num)) {
-			u32 offset = msr - MSR_IA32_MC0_CTL;
+			u32 offset = array_index_nospec(
+				msr - MSR_IA32_MC0_CTL,
+				MSR_IA32_MCx_CTL(bank_num) - MSR_IA32_MC0_CTL);
+
 			data = vcpu->arch.mce_banks[offset];
 			break;
 		}
@@ -3458,10 +3531,6 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 
 	kvm_x86_ops->vcpu_load(vcpu, cpu);
 
-	fpregs_assert_state_consistent();
-	if (test_thread_flag(TIF_NEED_FPU_LOAD))
-		switch_fpu_return();
-
 	/* Apply any externally detected TSC adjustments (due to suspend) */
 	if (unlikely(vcpu->arch.tsc_offset_adjustment)) {
 		adjust_tsc_offset_host(vcpu, vcpu->arch.tsc_offset_adjustment);
@@ -3501,15 +3570,25 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 
 static void kvm_steal_time_set_preempted(struct kvm_vcpu *vcpu)
 {
+	struct kvm_host_map map;
+	struct kvm_steal_time *st;
+
 	if (!(vcpu->arch.st.msr_val & KVM_MSR_ENABLED))
 		return;
 
-	vcpu->arch.st.steal.preempted = KVM_VCPU_PREEMPTED;
+	if (vcpu->arch.st.preempted)
+		return;
+
+	if (kvm_map_gfn(vcpu, vcpu->arch.st.msr_val >> PAGE_SHIFT, &map,
+			&vcpu->arch.st.cache, true))
+		return;
+
+	st = map.hva +
+		offset_in_page(vcpu->arch.st.msr_val & KVM_STEAL_VALID_BITS);
+
+	st->preempted = vcpu->arch.st.preempted = KVM_VCPU_PREEMPTED;
 
-	kvm_write_guest_offset_cached(vcpu->kvm, &vcpu->arch.st.stime,
-			&vcpu->arch.st.steal.preempted,
-			offsetof(struct kvm_steal_time, preempted),
-			sizeof(vcpu->arch.st.steal.preempted));
+	kvm_unmap_gfn(vcpu, &map, &vcpu->arch.st.cache, true, true);
 }
 
 void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)
@@ -4660,9 +4739,6 @@ static int kvm_vm_ioctl_reinject(struct kvm *kvm,
 {
 	struct kvm_pit *pit = kvm->arch.vpit;
 
-	if (!pit)
-		return -ENXIO;
-
 	/* pit->pit_state.lock was overloaded to prevent userspace from getting
 	 * an inconsistent state after running multiple KVM_REINJECT_CONTROL
 	 * ioctls in parallel.  Use a separate lock if that ioctl isn't rare.
@@ -5029,6 +5105,9 @@ set_identity_unlock:
 		r =  -EFAULT;
 		if (copy_from_user(&control, argp, sizeof(control)))
 			goto out;
+		r = -ENXIO;
+		if (!kvm->arch.vpit)
+			goto out;
 		r = kvm_vm_ioctl_reinject(kvm, &control);
 		break;
 	}
@@ -6186,6 +6265,21 @@ static bool emulator_get_cpuid(struct x86_emulate_ctxt *ctxt,
 	return kvm_cpuid(emul_to_vcpu(ctxt), eax, ebx, ecx, edx, check_limit);
 }
 
+static bool emulator_guest_has_long_mode(struct x86_emulate_ctxt *ctxt)
+{
+	return guest_cpuid_has(emul_to_vcpu(ctxt), X86_FEATURE_LM);
+}
+
+static bool emulator_guest_has_movbe(struct x86_emulate_ctxt *ctxt)
+{
+	return guest_cpuid_has(emul_to_vcpu(ctxt), X86_FEATURE_MOVBE);
+}
+
+static bool emulator_guest_has_fxsr(struct x86_emulate_ctxt *ctxt)
+{
+	return guest_cpuid_has(emul_to_vcpu(ctxt), X86_FEATURE_FXSR);
+}
+
 static ulong emulator_read_gpr(struct x86_emulate_ctxt *ctxt, unsigned reg)
 {
 	return kvm_register_read(emul_to_vcpu(ctxt), reg);
@@ -6263,6 +6357,9 @@ static const struct x86_emulate_ops emulate_ops = {
 	.fix_hypercall       = emulator_fix_hypercall,
 	.intercept           = emulator_intercept,
 	.get_cpuid           = emulator_get_cpuid,
+	.guest_has_long_mode = emulator_guest_has_long_mode,
+	.guest_has_movbe     = emulator_guest_has_movbe,
+	.guest_has_fxsr      = emulator_guest_has_fxsr,
 	.set_nmi_mask        = emulator_set_nmi_mask,
 	.get_hflags          = emulator_get_hflags,
 	.set_hflags          = emulator_set_hflags,
@@ -6379,11 +6476,11 @@ static int handle_emulation_failure(struct kvm_vcpu *vcpu, int emulation_type)
 	return 1;
 }
 
-static bool reexecute_instruction(struct kvm_vcpu *vcpu, gva_t cr2,
+static bool reexecute_instruction(struct kvm_vcpu *vcpu, gpa_t cr2_or_gpa,
 				  bool write_fault_to_shadow_pgtable,
 				  int emulation_type)
 {
-	gpa_t gpa = cr2;
+	gpa_t gpa = cr2_or_gpa;
 	kvm_pfn_t pfn;
 
 	if (!(emulation_type & EMULTYPE_ALLOW_RETRY))
@@ -6397,7 +6494,7 @@ static bool reexecute_instruction(struct kvm_vcpu *vcpu, gva_t cr2,
 		 * Write permission should be allowed since only
 		 * write access need to be emulated.
 		 */
-		gpa = kvm_mmu_gva_to_gpa_write(vcpu, cr2, NULL);
+		gpa = kvm_mmu_gva_to_gpa_write(vcpu, cr2_or_gpa, NULL);
 
 		/*
 		 * If the mapping is invalid in guest, let cpu retry
@@ -6454,10 +6551,10 @@ static bool reexecute_instruction(struct kvm_vcpu *vcpu, gva_t cr2,
 }
 
 static bool retry_instruction(struct x86_emulate_ctxt *ctxt,
-			      unsigned long cr2,  int emulation_type)
+			      gpa_t cr2_or_gpa,  int emulation_type)
 {
 	struct kvm_vcpu *vcpu = emul_to_vcpu(ctxt);
-	unsigned long last_retry_eip, last_retry_addr, gpa = cr2;
+	unsigned long last_retry_eip, last_retry_addr, gpa = cr2_or_gpa;
 
 	last_retry_eip = vcpu->arch.last_retry_eip;
 	last_retry_addr = vcpu->arch.last_retry_addr;
@@ -6486,14 +6583,14 @@ static bool retry_instruction(struct x86_emulate_ctxt *ctxt,
 	if (x86_page_table_writing_insn(ctxt))
 		return false;
 
-	if (ctxt->eip == last_retry_eip && last_retry_addr == cr2)
+	if (ctxt->eip == last_retry_eip && last_retry_addr == cr2_or_gpa)
 		return false;
 
 	vcpu->arch.last_retry_eip = ctxt->eip;
-	vcpu->arch.last_retry_addr = cr2;
+	vcpu->arch.last_retry_addr = cr2_or_gpa;
 
 	if (!vcpu->arch.mmu->direct_map)
-		gpa = kvm_mmu_gva_to_gpa_write(vcpu, cr2, NULL);
+		gpa = kvm_mmu_gva_to_gpa_write(vcpu, cr2_or_gpa, NULL);
 
 	kvm_mmu_unprotect_page(vcpu->kvm, gpa_to_gfn(gpa));
 
@@ -6639,11 +6736,8 @@ static bool is_vmware_backdoor_opcode(struct x86_emulate_ctxt *ctxt)
 	return false;
 }
 
-int x86_emulate_instruction(struct kvm_vcpu *vcpu,
-			    unsigned long cr2,
-			    int emulation_type,
-			    void *insn,
-			    int insn_len)
+int x86_emulate_instruction(struct kvm_vcpu *vcpu, gpa_t cr2_or_gpa,
+			    int emulation_type, void *insn, int insn_len)
 {
 	int r;
 	struct x86_emulate_ctxt *ctxt = &vcpu->arch.emulate_ctxt;
@@ -6689,8 +6783,9 @@ int x86_emulate_instruction(struct kvm_vcpu *vcpu,
 				kvm_queue_exception(vcpu, UD_VECTOR);
 				return 1;
 			}
-			if (reexecute_instruction(vcpu, cr2, write_fault_to_spt,
-						emulation_type))
+			if (reexecute_instruction(vcpu, cr2_or_gpa,
+						  write_fault_to_spt,
+						  emulation_type))
 				return 1;
 			if (ctxt->have_exception) {
 				/*
@@ -6724,7 +6819,7 @@ int x86_emulate_instruction(struct kvm_vcpu *vcpu,
 		return 1;
 	}
 
-	if (retry_instruction(ctxt, cr2, emulation_type))
+	if (retry_instruction(ctxt, cr2_or_gpa, emulation_type))
 		return 1;
 
 	/* this is needed for vmware backdoor interface to work since it
@@ -6736,7 +6831,7 @@ int x86_emulate_instruction(struct kvm_vcpu *vcpu,
 
 restart:
 	/* Save the faulting GPA (cr2) in the address field */
-	ctxt->exception.address = cr2;
+	ctxt->exception.address = cr2_or_gpa;
 
 	r = x86_emulate_insn(ctxt);
 
@@ -6744,7 +6839,7 @@ restart:
 		return 1;
 
 	if (r == EMULATION_FAILED) {
-		if (reexecute_instruction(vcpu, cr2, write_fault_to_spt,
+		if (reexecute_instruction(vcpu, cr2_or_gpa, write_fault_to_spt,
 					emulation_type))
 			return 1;
 
@@ -7357,8 +7452,8 @@ static void kvm_pv_kick_cpu_op(struct kvm *kvm, unsigned long flags, int apicid)
 {
 	struct kvm_lapic_irq lapic_irq;
 
-	lapic_irq.shorthand = 0;
-	lapic_irq.dest_mode = 0;
+	lapic_irq.shorthand = APIC_DEST_NOSHORT;
+	lapic_irq.dest_mode = APIC_DEST_PHYSICAL;
 	lapic_irq.level = 0;
 	lapic_irq.dest_id = apicid;
 	lapic_irq.msi_redir_hint = false;
@@ -7367,18 +7462,22 @@ static void kvm_pv_kick_cpu_op(struct kvm *kvm, unsigned long flags, int apicid)
 	kvm_irq_delivery_to_apic(kvm, NULL, &lapic_irq, NULL);
 }
 
-void kvm_vcpu_deactivate_apicv(struct kvm_vcpu *vcpu)
+bool kvm_apicv_activated(struct kvm *kvm)
 {
-	if (!lapic_in_kernel(vcpu)) {
-		WARN_ON_ONCE(vcpu->arch.apicv_active);
-		return;
-	}
-	if (!vcpu->arch.apicv_active)
-		return;
+	return (READ_ONCE(kvm->arch.apicv_inhibit_reasons) == 0);
+}
+EXPORT_SYMBOL_GPL(kvm_apicv_activated);
 
-	vcpu->arch.apicv_active = false;
-	kvm_x86_ops->refresh_apicv_exec_ctrl(vcpu);
+void kvm_apicv_init(struct kvm *kvm, bool enable)
+{
+	if (enable)
+		clear_bit(APICV_INHIBIT_REASON_DISABLE,
+			  &kvm->arch.apicv_inhibit_reasons);
+	else
+		set_bit(APICV_INHIBIT_REASON_DISABLE,
+			&kvm->arch.apicv_inhibit_reasons);
 }
+EXPORT_SYMBOL_GPL(kvm_apicv_init);
 
 static void kvm_sched_yield(struct kvm *kvm, unsigned long dest_id)
 {
@@ -7907,6 +8006,47 @@ void kvm_make_scan_ioapic_request(struct kvm *kvm)
 	kvm_make_all_cpus_request(kvm, KVM_REQ_SCAN_IOAPIC);
 }
 
+void kvm_vcpu_update_apicv(struct kvm_vcpu *vcpu)
+{
+	if (!lapic_in_kernel(vcpu))
+		return;
+
+	vcpu->arch.apicv_active = kvm_apicv_activated(vcpu->kvm);
+	kvm_apic_update_apicv(vcpu);
+	kvm_x86_ops->refresh_apicv_exec_ctrl(vcpu);
+}
+EXPORT_SYMBOL_GPL(kvm_vcpu_update_apicv);
+
+/*
+ * NOTE: Do not hold any lock prior to calling this.
+ *
+ * In particular, kvm_request_apicv_update() expects kvm->srcu not to be
+ * locked, because it calls __x86_set_memory_region() which does
+ * synchronize_srcu(&kvm->srcu).
+ */
+void kvm_request_apicv_update(struct kvm *kvm, bool activate, ulong bit)
+{
+	if (!kvm_x86_ops->check_apicv_inhibit_reasons ||
+	    !kvm_x86_ops->check_apicv_inhibit_reasons(bit))
+		return;
+
+	if (activate) {
+		if (!test_and_clear_bit(bit, &kvm->arch.apicv_inhibit_reasons) ||
+		    !kvm_apicv_activated(kvm))
+			return;
+	} else {
+		if (test_and_set_bit(bit, &kvm->arch.apicv_inhibit_reasons) ||
+		    kvm_apicv_activated(kvm))
+			return;
+	}
+
+	trace_kvm_apicv_update_request(activate, bit);
+	if (kvm_x86_ops->pre_update_apicv_exec_ctrl)
+		kvm_x86_ops->pre_update_apicv_exec_ctrl(kvm, activate);
+	kvm_make_all_cpus_request(kvm, KVM_REQ_APICV_UPDATE);
+}
+EXPORT_SYMBOL_GPL(kvm_request_apicv_update);
+
 static void vcpu_scan_ioapic(struct kvm_vcpu *vcpu)
 {
 	if (!kvm_apic_present(vcpu))
@@ -7997,6 +8137,7 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
 	bool req_int_win =
 		dm_request_for_irq_injection(vcpu) &&
 		kvm_cpu_accept_dm_intr(vcpu);
+	enum exit_fastpath_completion exit_fastpath = EXIT_FASTPATH_NONE;
 
 	bool req_immediate_exit = false;
 
@@ -8096,6 +8237,8 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
 		 */
 		if (kvm_check_request(KVM_REQ_HV_STIMER, vcpu))
 			kvm_hv_process_stimers(vcpu);
+		if (kvm_check_request(KVM_REQ_APICV_UPDATE, vcpu))
+			kvm_vcpu_update_apicv(vcpu);
 	}
 
 	if (kvm_check_request(KVM_REQ_EVENT, vcpu) || req_int_win) {
@@ -8198,8 +8341,9 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
 	trace_kvm_entry(vcpu->vcpu_id);
 	guest_enter_irqoff();
 
-	/* The preempt notifier should have taken care of the FPU already.  */
-	WARN_ON_ONCE(test_thread_flag(TIF_NEED_FPU_LOAD));
+	fpregs_assert_state_consistent();
+	if (test_thread_flag(TIF_NEED_FPU_LOAD))
+		switch_fpu_return();
 
 	if (unlikely(vcpu->arch.switch_db_regs)) {
 		set_debugreg(0, 7);
@@ -8243,7 +8387,7 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
 	vcpu->mode = OUTSIDE_GUEST_MODE;
 	smp_wmb();
 
-	kvm_x86_ops->handle_exit_irqoff(vcpu);
+	kvm_x86_ops->handle_exit_irqoff(vcpu, &exit_fastpath);
 
 	/*
 	 * Consume any pending interrupts, including the possible source of
@@ -8287,7 +8431,7 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
 		kvm_lapic_sync_from_vapic(vcpu);
 
 	vcpu->arch.gpa_available = false;
-	r = kvm_x86_ops->handle_exit(vcpu);
+	r = kvm_x86_ops->handle_exit(vcpu, exit_fastpath);
 	return r;
 
 cancel_injection:
@@ -8471,12 +8615,26 @@ static int complete_emulated_mmio(struct kvm_vcpu *vcpu)
 	return 0;
 }
 
+static void kvm_save_current_fpu(struct fpu *fpu)
+{
+	/*
+	 * If the target FPU state is not resident in the CPU registers, just
+	 * memcpy() from current, else save CPU state directly to the target.
+	 */
+	if (test_thread_flag(TIF_NEED_FPU_LOAD))
+		memcpy(&fpu->state, &current->thread.fpu.state,
+		       fpu_kernel_xstate_size);
+	else
+		copy_fpregs_to_fpstate(fpu);
+}
+
 /* Swap (qemu) user FPU context for the guest FPU context. */
 static void kvm_load_guest_fpu(struct kvm_vcpu *vcpu)
 {
 	fpregs_lock();
 
-	copy_fpregs_to_fpstate(vcpu->arch.user_fpu);
+	kvm_save_current_fpu(vcpu->arch.user_fpu);
+
 	/* PKRU is separately restored in kvm_x86_ops->run.  */
 	__copy_kernel_to_fpregs(&vcpu->arch.guest_fpu->state,
 				~XFEATURE_MASK_PKRU);
@@ -8492,7 +8650,8 @@ static void kvm_put_guest_fpu(struct kvm_vcpu *vcpu)
 {
 	fpregs_lock();
 
-	copy_fpregs_to_fpstate(vcpu->arch.guest_fpu);
+	kvm_save_current_fpu(vcpu->arch.guest_fpu);
+
 	copy_kernel_to_fpregs(&vcpu->arch.user_fpu->state);
 
 	fpregs_mark_activate();
@@ -8714,6 +8873,8 @@ int kvm_arch_vcpu_ioctl_get_mpstate(struct kvm_vcpu *vcpu,
 				    struct kvm_mp_state *mp_state)
 {
 	vcpu_load(vcpu);
+	if (kvm_mpx_supported())
+		kvm_load_guest_fpu(vcpu);
 
 	kvm_apic_accept_events(vcpu);
 	if (vcpu->arch.mp_state == KVM_MP_STATE_HALTED &&
@@ -8722,6 +8883,8 @@ int kvm_arch_vcpu_ioctl_get_mpstate(struct kvm_vcpu *vcpu,
 	else
 		mp_state->mp_state = vcpu->arch.mp_state;
 
+	if (kvm_mpx_supported())
+		kvm_put_guest_fpu(vcpu);
 	vcpu_put(vcpu);
 	return 0;
 }
@@ -9082,33 +9245,91 @@ static void fx_init(struct kvm_vcpu *vcpu)
 	vcpu->arch.cr0 |= X86_CR0_ET;
 }
 
-void kvm_arch_vcpu_free(struct kvm_vcpu *vcpu)
+int kvm_arch_vcpu_precreate(struct kvm *kvm, unsigned int id)
 {
-	void *wbinvd_dirty_mask = vcpu->arch.wbinvd_dirty_mask;
-
-	kvmclock_reset(vcpu);
+	if (kvm_check_tsc_unstable() && atomic_read(&kvm->online_vcpus) != 0)
+		pr_warn_once("kvm: SMP vm created on host with unstable TSC; "
+			     "guest TSC will not be reliable\n");
 
-	kvm_x86_ops->vcpu_free(vcpu);
-	free_cpumask_var(wbinvd_dirty_mask);
+	return 0;
 }
 
-struct kvm_vcpu *kvm_arch_vcpu_create(struct kvm *kvm,
-						unsigned int id)
+int kvm_arch_vcpu_create(struct kvm_vcpu *vcpu)
 {
-	struct kvm_vcpu *vcpu;
+	struct page *page;
+	int r;
 
-	if (kvm_check_tsc_unstable() && atomic_read(&kvm->online_vcpus) != 0)
-		printk_once(KERN_WARNING
-		"kvm: SMP vm created on host with unstable TSC; "
-		"guest TSC will not be reliable\n");
+	vcpu->arch.emulate_ctxt.ops = &emulate_ops;
+	if (!irqchip_in_kernel(vcpu->kvm) || kvm_vcpu_is_reset_bsp(vcpu))
+		vcpu->arch.mp_state = KVM_MP_STATE_RUNNABLE;
+	else
+		vcpu->arch.mp_state = KVM_MP_STATE_UNINITIALIZED;
 
-	vcpu = kvm_x86_ops->vcpu_create(kvm, id);
+	kvm_set_tsc_khz(vcpu, max_tsc_khz);
 
-	return vcpu;
-}
+	r = kvm_mmu_create(vcpu);
+	if (r < 0)
+		return r;
+
+	if (irqchip_in_kernel(vcpu->kvm)) {
+		r = kvm_create_lapic(vcpu, lapic_timer_advance_ns);
+		if (r < 0)
+			goto fail_mmu_destroy;
+		if (kvm_apicv_activated(vcpu->kvm))
+			vcpu->arch.apicv_active = true;
+	} else
+		static_key_slow_inc(&kvm_no_apic_vcpu);
+
+	r = -ENOMEM;
+
+	page = alloc_page(GFP_KERNEL | __GFP_ZERO);
+	if (!page)
+		goto fail_free_lapic;
+	vcpu->arch.pio_data = page_address(page);
+
+	vcpu->arch.mce_banks = kzalloc(KVM_MAX_MCE_BANKS * sizeof(u64) * 4,
+				       GFP_KERNEL_ACCOUNT);
+	if (!vcpu->arch.mce_banks)
+		goto fail_free_pio_data;
+	vcpu->arch.mcg_cap = KVM_MAX_MCE_BANKS;
+
+	if (!zalloc_cpumask_var(&vcpu->arch.wbinvd_dirty_mask,
+				GFP_KERNEL_ACCOUNT))
+		goto fail_free_mce_banks;
+
+	vcpu->arch.user_fpu = kmem_cache_zalloc(x86_fpu_cache,
+						GFP_KERNEL_ACCOUNT);
+	if (!vcpu->arch.user_fpu) {
+		pr_err("kvm: failed to allocate userspace's fpu\n");
+		goto free_wbinvd_dirty_mask;
+	}
+
+	vcpu->arch.guest_fpu = kmem_cache_zalloc(x86_fpu_cache,
+						 GFP_KERNEL_ACCOUNT);
+	if (!vcpu->arch.guest_fpu) {
+		pr_err("kvm: failed to allocate vcpu's fpu\n");
+		goto free_user_fpu;
+	}
+	fx_init(vcpu);
+
+	vcpu->arch.guest_xstate_size = XSAVE_HDR_SIZE + XSAVE_HDR_OFFSET;
+
+	vcpu->arch.maxphyaddr = cpuid_query_maxphyaddr(vcpu);
+
+	vcpu->arch.pat = MSR_IA32_CR_PAT_DEFAULT;
+
+	kvm_async_pf_hash_reset(vcpu);
+	kvm_pmu_init(vcpu);
+
+	vcpu->arch.pending_external_vector = -1;
+	vcpu->arch.preempted_in_kernel = false;
+
+	kvm_hv_vcpu_init(vcpu);
+
+	r = kvm_x86_ops->vcpu_create(vcpu);
+	if (r)
+		goto free_guest_fpu;
 
-int kvm_arch_vcpu_setup(struct kvm_vcpu *vcpu)
-{
 	vcpu->arch.arch_capabilities = kvm_get_arch_capabilities();
 	vcpu->arch.msr_platform_info = MSR_PLATFORM_INFO_CPUID_FAULT;
 	kvm_vcpu_mtrr_init(vcpu);
@@ -9117,6 +9338,22 @@ int kvm_arch_vcpu_setup(struct kvm_vcpu *vcpu)
 	kvm_init_mmu(vcpu, false);
 	vcpu_put(vcpu);
 	return 0;
+
+free_guest_fpu:
+	kmem_cache_free(x86_fpu_cache, vcpu->arch.guest_fpu);
+free_user_fpu:
+	kmem_cache_free(x86_fpu_cache, vcpu->arch.user_fpu);
+free_wbinvd_dirty_mask:
+	free_cpumask_var(vcpu->arch.wbinvd_dirty_mask);
+fail_free_mce_banks:
+	kfree(vcpu->arch.mce_banks);
+fail_free_pio_data:
+	free_page((unsigned long)vcpu->arch.pio_data);
+fail_free_lapic:
+	kvm_free_lapic(vcpu);
+fail_mmu_destroy:
+	kvm_mmu_destroy(vcpu);
+	return r;
 }
 
 void kvm_arch_vcpu_postcreate(struct kvm_vcpu *vcpu)
@@ -9149,13 +9386,29 @@ void kvm_arch_vcpu_postcreate(struct kvm_vcpu *vcpu)
 
 void kvm_arch_vcpu_destroy(struct kvm_vcpu *vcpu)
 {
-	vcpu->arch.apf.msr_val = 0;
+	struct gfn_to_pfn_cache *cache = &vcpu->arch.st.cache;
+	int idx;
 
-	vcpu_load(vcpu);
-	kvm_mmu_unload(vcpu);
-	vcpu_put(vcpu);
+	kvm_release_pfn(cache->pfn, cache->dirty, cache);
+
+	kvmclock_reset(vcpu);
 
 	kvm_x86_ops->vcpu_free(vcpu);
+
+	free_cpumask_var(vcpu->arch.wbinvd_dirty_mask);
+	kmem_cache_free(x86_fpu_cache, vcpu->arch.user_fpu);
+	kmem_cache_free(x86_fpu_cache, vcpu->arch.guest_fpu);
+
+	kvm_hv_vcpu_uninit(vcpu);
+	kvm_pmu_destroy(vcpu);
+	kfree(vcpu->arch.mce_banks);
+	kvm_free_lapic(vcpu);
+	idx = srcu_read_lock(&vcpu->kvm->srcu);
+	kvm_mmu_destroy(vcpu);
+	srcu_read_unlock(&vcpu->kvm->srcu, idx);
+	free_page((unsigned long)vcpu->arch.pio_data);
+	if (!lapic_in_kernel(vcpu))
+		static_key_slow_dec(&kvm_no_apic_vcpu);
 }
 
 void kvm_vcpu_reset(struct kvm_vcpu *vcpu, bool init_event)
@@ -9171,7 +9424,6 @@ void kvm_vcpu_reset(struct kvm_vcpu *vcpu, bool init_event)
 	vcpu->arch.nmi_injected = false;
 	kvm_clear_interrupt_queue(vcpu);
 	kvm_clear_exception_queue(vcpu);
-	vcpu->arch.exception.pending = false;
 
 	memset(vcpu->arch.db, 0, sizeof(vcpu->arch.db));
 	kvm_update_dr0123(vcpu);
@@ -9347,6 +9599,8 @@ int kvm_arch_hardware_setup(void)
 	if (r != 0)
 		return r;
 
+	cr4_reserved_bits = kvm_host_cr4_reserved_bits(&boot_cpu_data);
+
 	if (kvm_has_tsc_control) {
 		/*
 		 * Make sure the user can only configure tsc_khz values that
@@ -9375,6 +9629,13 @@ void kvm_arch_hardware_unsetup(void)
 
 int kvm_arch_check_processor_compat(void)
 {
+	struct cpuinfo_x86 *c = &cpu_data(smp_processor_id());
+
+	WARN_ON(!irqs_disabled());
+
+	if (kvm_host_cr4_reserved_bits(c) != cr4_reserved_bits)
+		return -EIO;
+
 	return kvm_x86_ops->check_processor_compatibility();
 }
 
@@ -9392,98 +9653,6 @@ bool kvm_vcpu_is_bsp(struct kvm_vcpu *vcpu)
 struct static_key kvm_no_apic_vcpu __read_mostly;
 EXPORT_SYMBOL_GPL(kvm_no_apic_vcpu);
 
-int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu)
-{
-	struct page *page;
-	int r;
-
-	vcpu->arch.emulate_ctxt.ops = &emulate_ops;
-	if (!irqchip_in_kernel(vcpu->kvm) || kvm_vcpu_is_reset_bsp(vcpu))
-		vcpu->arch.mp_state = KVM_MP_STATE_RUNNABLE;
-	else
-		vcpu->arch.mp_state = KVM_MP_STATE_UNINITIALIZED;
-
-	page = alloc_page(GFP_KERNEL | __GFP_ZERO);
-	if (!page) {
-		r = -ENOMEM;
-		goto fail;
-	}
-	vcpu->arch.pio_data = page_address(page);
-
-	kvm_set_tsc_khz(vcpu, max_tsc_khz);
-
-	r = kvm_mmu_create(vcpu);
-	if (r < 0)
-		goto fail_free_pio_data;
-
-	if (irqchip_in_kernel(vcpu->kvm)) {
-		vcpu->arch.apicv_active = kvm_x86_ops->get_enable_apicv(vcpu->kvm);
-		r = kvm_create_lapic(vcpu, lapic_timer_advance_ns);
-		if (r < 0)
-			goto fail_mmu_destroy;
-	} else
-		static_key_slow_inc(&kvm_no_apic_vcpu);
-
-	vcpu->arch.mce_banks = kzalloc(KVM_MAX_MCE_BANKS * sizeof(u64) * 4,
-				       GFP_KERNEL_ACCOUNT);
-	if (!vcpu->arch.mce_banks) {
-		r = -ENOMEM;
-		goto fail_free_lapic;
-	}
-	vcpu->arch.mcg_cap = KVM_MAX_MCE_BANKS;
-
-	if (!zalloc_cpumask_var(&vcpu->arch.wbinvd_dirty_mask,
-				GFP_KERNEL_ACCOUNT)) {
-		r = -ENOMEM;
-		goto fail_free_mce_banks;
-	}
-
-	fx_init(vcpu);
-
-	vcpu->arch.guest_xstate_size = XSAVE_HDR_SIZE + XSAVE_HDR_OFFSET;
-
-	vcpu->arch.maxphyaddr = cpuid_query_maxphyaddr(vcpu);
-
-	vcpu->arch.pat = MSR_IA32_CR_PAT_DEFAULT;
-
-	kvm_async_pf_hash_reset(vcpu);
-	kvm_pmu_init(vcpu);
-
-	vcpu->arch.pending_external_vector = -1;
-	vcpu->arch.preempted_in_kernel = false;
-
-	kvm_hv_vcpu_init(vcpu);
-
-	return 0;
-
-fail_free_mce_banks:
-	kfree(vcpu->arch.mce_banks);
-fail_free_lapic:
-	kvm_free_lapic(vcpu);
-fail_mmu_destroy:
-	kvm_mmu_destroy(vcpu);
-fail_free_pio_data:
-	free_page((unsigned long)vcpu->arch.pio_data);
-fail:
-	return r;
-}
-
-void kvm_arch_vcpu_uninit(struct kvm_vcpu *vcpu)
-{
-	int idx;
-
-	kvm_hv_vcpu_uninit(vcpu);
-	kvm_pmu_destroy(vcpu);
-	kfree(vcpu->arch.mce_banks);
-	kvm_free_lapic(vcpu);
-	idx = srcu_read_lock(&vcpu->kvm->srcu);
-	kvm_mmu_destroy(vcpu);
-	srcu_read_unlock(&vcpu->kvm->srcu, idx);
-	free_page((unsigned long)vcpu->arch.pio_data);
-	if (!lapic_in_kernel(vcpu))
-		static_key_slow_dec(&kvm_no_apic_vcpu);
-}
-
 void kvm_arch_sched_in(struct kvm_vcpu *vcpu, int cpu)
 {
 	struct kvm_pmu *pmu = vcpu_to_pmu(vcpu);
@@ -9518,7 +9687,7 @@ int kvm_arch_init_vm(struct kvm *kvm, unsigned long type)
 	mutex_init(&kvm->arch.apic_map_lock);
 	spin_lock_init(&kvm->arch.pvclock_gtod_sync_lock);
 
-	kvm->arch.kvmclock_offset = -ktime_get_boottime_ns();
+	kvm->arch.kvmclock_offset = -get_kvmclock_base_ns();
 	pvclock_update_vm_gtod_copy(kvm);
 
 	kvm->arch.guest_can_read_msr_platform_info = true;
@@ -9558,7 +9727,7 @@ static void kvm_free_vcpus(struct kvm *kvm)
 		kvm_unload_vcpu_mmu(vcpu);
 	}
 	kvm_for_each_vcpu(i, vcpu, kvm)
-		kvm_arch_vcpu_free(vcpu);
+		kvm_vcpu_destroy(vcpu);
 
 	mutex_lock(&kvm->lock);
 	for (i = 0; i < atomic_read(&kvm->online_vcpus); i++)
@@ -9627,18 +9796,6 @@ int __x86_set_memory_region(struct kvm *kvm, int id, gpa_t gpa, u32 size)
 }
 EXPORT_SYMBOL_GPL(__x86_set_memory_region);
 
-int x86_set_memory_region(struct kvm *kvm, int id, gpa_t gpa, u32 size)
-{
-	int r;
-
-	mutex_lock(&kvm->slots_lock);
-	r = __x86_set_memory_region(kvm, id, gpa, size);
-	mutex_unlock(&kvm->slots_lock);
-
-	return r;
-}
-EXPORT_SYMBOL_GPL(x86_set_memory_region);
-
 void kvm_arch_pre_destroy_vm(struct kvm *kvm)
 {
 	kvm_mmu_pre_destroy_vm(kvm);
@@ -9652,9 +9809,13 @@ void kvm_arch_destroy_vm(struct kvm *kvm)
 		 * unless the the memory map has changed due to process exit
 		 * or fd copying.
 		 */
-		x86_set_memory_region(kvm, APIC_ACCESS_PAGE_PRIVATE_MEMSLOT, 0, 0);
-		x86_set_memory_region(kvm, IDENTITY_PAGETABLE_PRIVATE_MEMSLOT, 0, 0);
-		x86_set_memory_region(kvm, TSS_PRIVATE_MEMSLOT, 0, 0);
+		mutex_lock(&kvm->slots_lock);
+		__x86_set_memory_region(kvm, APIC_ACCESS_PAGE_PRIVATE_MEMSLOT,
+					0, 0);
+		__x86_set_memory_region(kvm, IDENTITY_PAGETABLE_PRIVATE_MEMSLOT,
+					0, 0);
+		__x86_set_memory_region(kvm, TSS_PRIVATE_MEMSLOT, 0, 0);
+		mutex_unlock(&kvm->slots_lock);
 	}
 	if (kvm_x86_ops->vm_destroy)
 		kvm_x86_ops->vm_destroy(kvm);
@@ -9758,11 +9919,18 @@ out_free:
 
 void kvm_arch_memslots_updated(struct kvm *kvm, u64 gen)
 {
+	struct kvm_vcpu *vcpu;
+	int i;
+
 	/*
 	 * memslots->generation has been incremented.
 	 * mmio generation may have reached its maximum value.
 	 */
 	kvm_mmu_invalidate_mmio_sptes(kvm, gen);
+
+	/* Force re-initialization of steal_time cache */
+	kvm_for_each_vcpu(i, vcpu, kvm)
+		kvm_vcpu_kick(vcpu);
 }
 
 int kvm_arch_prepare_memory_region(struct kvm *kvm,
@@ -9792,7 +9960,7 @@ static void kvm_mmu_slot_apply_flags(struct kvm *kvm,
 	 *
 	 * The reason is, in case of PML, we need to set D-bit for any slots
 	 * with dirty logging disabled in order to eliminate unnecessary GPA
-	 * logging in PML buffer (and potential PML buffer full VMEXT). This
+	 * logging in PML buffer (and potential PML buffer full VMEXIT). This
 	 * guarantees leaving PML enabled during guest's lifetime won't have
 	 * any additional overhead from PML when guest is running with dirty
 	 * logging disabled for memory slots.
@@ -10014,7 +10182,7 @@ void kvm_arch_async_page_ready(struct kvm_vcpu *vcpu, struct kvm_async_pf *work)
 	      work->arch.cr3 != vcpu->arch.mmu->get_cr3(vcpu))
 		return;
 
-	vcpu->arch.mmu->page_fault(vcpu, work->gva, 0, true);
+	vcpu->arch.mmu->page_fault(vcpu, work->cr2_or_gpa, 0, true);
 }
 
 static inline u32 kvm_async_pf_hash_fn(gfn_t gfn)
@@ -10127,7 +10295,7 @@ void kvm_arch_async_page_not_present(struct kvm_vcpu *vcpu,
 {
 	struct x86_exception fault;
 
-	trace_kvm_async_pf_not_present(work->arch.token, work->gva);
+	trace_kvm_async_pf_not_present(work->arch.token, work->cr2_or_gpa);
 	kvm_add_async_pf_gfn(vcpu, work->arch.gfn);
 
 	if (kvm_can_deliver_async_pf(vcpu) &&
@@ -10162,7 +10330,7 @@ void kvm_arch_async_page_present(struct kvm_vcpu *vcpu,
 		work->arch.token = ~0; /* broadcast wakeup */
 	else
 		kvm_del_async_pf_gfn(vcpu, work->arch.gfn);
-	trace_kvm_async_pf_ready(work->arch.token, work->gva);
+	trace_kvm_async_pf_ready(work->arch.token, work->cr2_or_gpa);
 
 	if (vcpu->arch.apf.msr_val & KVM_ASYNC_PF_ENABLED &&
 	    !apf_get_user(vcpu, &val)) {
@@ -10284,7 +10452,6 @@ bool kvm_vector_hashing_enabled(void)
 {
 	return vector_hashing;
 }
-EXPORT_SYMBOL_GPL(kvm_vector_hashing_enabled);
 
 bool kvm_arch_no_poll(struct kvm_vcpu *vcpu)
 {
@@ -10292,6 +10459,28 @@ bool kvm_arch_no_poll(struct kvm_vcpu *vcpu)
 }
 EXPORT_SYMBOL_GPL(kvm_arch_no_poll);
 
+u64 kvm_spec_ctrl_valid_bits(struct kvm_vcpu *vcpu)
+{
+	uint64_t bits = SPEC_CTRL_IBRS | SPEC_CTRL_STIBP | SPEC_CTRL_SSBD;
+
+	/* The STIBP bit doesn't fault even if it's not advertised */
+	if (!guest_cpuid_has(vcpu, X86_FEATURE_SPEC_CTRL) &&
+	    !guest_cpuid_has(vcpu, X86_FEATURE_AMD_IBRS))
+		bits &= ~(SPEC_CTRL_IBRS | SPEC_CTRL_STIBP);
+	if (!boot_cpu_has(X86_FEATURE_SPEC_CTRL) &&
+	    !boot_cpu_has(X86_FEATURE_AMD_IBRS))
+		bits &= ~(SPEC_CTRL_IBRS | SPEC_CTRL_STIBP);
+
+	if (!guest_cpuid_has(vcpu, X86_FEATURE_SPEC_CTRL_SSBD) &&
+	    !guest_cpuid_has(vcpu, X86_FEATURE_AMD_SSBD))
+		bits &= ~SPEC_CTRL_SSBD;
+	if (!boot_cpu_has(X86_FEATURE_SPEC_CTRL_SSBD) &&
+	    !boot_cpu_has(X86_FEATURE_AMD_SSBD))
+		bits &= ~SPEC_CTRL_SSBD;
+
+	return bits;
+}
+EXPORT_SYMBOL_GPL(kvm_spec_ctrl_valid_bits);
 
 EXPORT_TRACEPOINT_SYMBOL_GPL(kvm_exit);
 EXPORT_TRACEPOINT_SYMBOL_GPL(kvm_fast_mmio);
@@ -10313,3 +10502,4 @@ EXPORT_TRACEPOINT_SYMBOL_GPL(kvm_pml_full);
 EXPORT_TRACEPOINT_SYMBOL_GPL(kvm_pi_irte_update);
 EXPORT_TRACEPOINT_SYMBOL_GPL(kvm_avic_unaccelerated_access);
 EXPORT_TRACEPOINT_SYMBOL_GPL(kvm_avic_incomplete_ipi);
+EXPORT_TRACEPOINT_SYMBOL_GPL(kvm_apicv_update_request);
diff --git a/arch/x86/kvm/x86.h b/arch/x86/kvm/x86.h
index 29391af8871d..3624665acee4 100644
--- a/arch/x86/kvm/x86.h
+++ b/arch/x86/kvm/x86.h
@@ -144,11 +144,6 @@ static inline bool is_pae_paging(struct kvm_vcpu *vcpu)
 	return !is_long_mode(vcpu) && is_pae(vcpu) && is_paging(vcpu);
 }
 
-static inline u32 bit(int bitno)
-{
-	return 1 << (bitno & 31);
-}
-
 static inline u8 vcpu_virt_addr_bits(struct kvm_vcpu *vcpu)
 {
 	return kvm_read_cr4_bits(vcpu, X86_CR4_LA57) ? 57 : 48;
@@ -166,21 +161,13 @@ static inline u64 get_canonical(u64 la, u8 vaddr_bits)
 
 static inline bool is_noncanonical_address(u64 la, struct kvm_vcpu *vcpu)
 {
-#ifdef CONFIG_X86_64
 	return get_canonical(la, vcpu_virt_addr_bits(vcpu)) != la;
-#else
-	return false;
-#endif
 }
 
 static inline bool emul_is_noncanonical_address(u64 la,
 						struct x86_emulate_ctxt *ctxt)
 {
-#ifdef CONFIG_X86_64
 	return get_canonical(la, ctxt_virt_addr_bits(ctxt)) != la;
-#else
-	return false;
-#endif
 }
 
 static inline void vcpu_cache_mmio_info(struct kvm_vcpu *vcpu,
@@ -289,8 +276,9 @@ int kvm_mtrr_get_msr(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata);
 bool kvm_mtrr_check_gfn_range_consistency(struct kvm_vcpu *vcpu, gfn_t gfn,
 					  int page_num);
 bool kvm_vector_hashing_enabled(void);
-int x86_emulate_instruction(struct kvm_vcpu *vcpu, unsigned long cr2,
+int x86_emulate_instruction(struct kvm_vcpu *vcpu, gpa_t cr2_or_gpa,
 			    int emulation_type, void *insn, int insn_len);
+enum exit_fastpath_completion handle_fastpath_set_msr_irqoff(struct kvm_vcpu *vcpu);
 
 #define KVM_SUPPORTED_XCR0     (XFEATURE_MASK_FP | XFEATURE_MASK_SSE \
 				| XFEATURE_MASK_YMM | XFEATURE_MASK_BNDREGS \
@@ -369,7 +357,14 @@ static inline bool kvm_pat_valid(u64 data)
 	return (data | ((data & 0x0202020202020202ull) << 1)) == data;
 }
 
+static inline bool kvm_dr7_valid(u64 data)
+{
+	/* Bits [63:32] are reserved */
+	return !(data >> 32);
+}
+
 void kvm_load_guest_xsave_state(struct kvm_vcpu *vcpu);
 void kvm_load_host_xsave_state(struct kvm_vcpu *vcpu);
+u64 kvm_spec_ctrl_valid_bits(struct kvm_vcpu *vcpu);
 
 #endif
diff --git a/arch/x86/lib/x86-opcode-map.txt b/arch/x86/lib/x86-opcode-map.txt
index 8908c58bd6cd..53adc1762ec0 100644
--- a/arch/x86/lib/x86-opcode-map.txt
+++ b/arch/x86/lib/x86-opcode-map.txt
@@ -929,7 +929,7 @@ EndTable
 
 GrpTable: Grp3_2
 0: TEST Ev,Iz
-1:
+1: TEST Ev,Iz
 2: NOT Ev
 3: NEG Ev
 4: MUL rAX,Ev
diff --git a/arch/x86/mm/Makefile b/arch/x86/mm/Makefile
index 345848f270e3..98f7c6fa2eaa 100644
--- a/arch/x86/mm/Makefile
+++ b/arch/x86/mm/Makefile
@@ -28,8 +28,8 @@ CFLAGS_fault.o := -I $(srctree)/$(src)/../include/asm/trace
 obj-$(CONFIG_X86_32)		+= pgtable_32.o iomap_32.o
 
 obj-$(CONFIG_HUGETLB_PAGE)	+= hugetlbpage.o
-obj-$(CONFIG_X86_PTDUMP_CORE)	+= dump_pagetables.o
-obj-$(CONFIG_X86_PTDUMP)	+= debug_pagetables.o
+obj-$(CONFIG_PTDUMP_CORE)	+= dump_pagetables.o
+obj-$(CONFIG_PTDUMP_DEBUGFS)	+= debug_pagetables.o
 
 obj-$(CONFIG_HIGHMEM)		+= highmem_32.o
 
@@ -45,7 +45,6 @@ obj-$(CONFIG_AMD_NUMA)		+= amdtopology.o
 obj-$(CONFIG_ACPI_NUMA)		+= srat.o
 obj-$(CONFIG_NUMA_EMU)		+= numa_emulation.o
 
-obj-$(CONFIG_X86_INTEL_MPX)			+= mpx.o
 obj-$(CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS)	+= pkeys.o
 obj-$(CONFIG_RANDOMIZE_MEMORY)			+= kaslr.o
 obj-$(CONFIG_PAGE_TABLE_ISOLATION)		+= pti.o
diff --git a/arch/x86/mm/debug_pagetables.c b/arch/x86/mm/debug_pagetables.c
index 39001a401eff..4a3b62f780b4 100644
--- a/arch/x86/mm/debug_pagetables.c
+++ b/arch/x86/mm/debug_pagetables.c
@@ -7,7 +7,7 @@
 
 static int ptdump_show(struct seq_file *m, void *v)
 {
-	ptdump_walk_pgd_level_debugfs(m, NULL, false);
+	ptdump_walk_pgd_level_debugfs(m, &init_mm, false);
 	return 0;
 }
 
@@ -15,11 +15,8 @@ DEFINE_SHOW_ATTRIBUTE(ptdump);
 
 static int ptdump_curknl_show(struct seq_file *m, void *v)
 {
-	if (current->mm->pgd) {
-		down_read(&current->mm->mmap_sem);
-		ptdump_walk_pgd_level_debugfs(m, current->mm->pgd, false);
-		up_read(&current->mm->mmap_sem);
-	}
+	if (current->mm->pgd)
+		ptdump_walk_pgd_level_debugfs(m, current->mm, false);
 	return 0;
 }
 
@@ -28,11 +25,8 @@ DEFINE_SHOW_ATTRIBUTE(ptdump_curknl);
 #ifdef CONFIG_PAGE_TABLE_ISOLATION
 static int ptdump_curusr_show(struct seq_file *m, void *v)
 {
-	if (current->mm->pgd) {
-		down_read(&current->mm->mmap_sem);
-		ptdump_walk_pgd_level_debugfs(m, current->mm->pgd, true);
-		up_read(&current->mm->mmap_sem);
-	}
+	if (current->mm->pgd)
+		ptdump_walk_pgd_level_debugfs(m, current->mm, true);
 	return 0;
 }
 
@@ -43,7 +37,7 @@ DEFINE_SHOW_ATTRIBUTE(ptdump_curusr);
 static int ptdump_efi_show(struct seq_file *m, void *v)
 {
 	if (efi_mm.pgd)
-		ptdump_walk_pgd_level_debugfs(m, efi_mm.pgd, false);
+		ptdump_walk_pgd_level_debugfs(m, &efi_mm, false);
 	return 0;
 }
 
diff --git a/arch/x86/mm/dump_pagetables.c b/arch/x86/mm/dump_pagetables.c
index ab67822fd2f4..64229dad7eab 100644
--- a/arch/x86/mm/dump_pagetables.c
+++ b/arch/x86/mm/dump_pagetables.c
@@ -16,6 +16,7 @@
 #include <linux/seq_file.h>
 #include <linux/highmem.h>
 #include <linux/pci.h>
+#include <linux/ptdump.h>
 
 #include <asm/e820/types.h>
 #include <asm/pgtable.h>
@@ -26,16 +27,18 @@
  * when a "break" in the continuity is found.
  */
 struct pg_state {
+	struct ptdump_state ptdump;
 	int level;
-	pgprot_t current_prot;
+	pgprotval_t current_prot;
 	pgprotval_t effective_prot;
+	pgprotval_t prot_levels[5];
 	unsigned long start_address;
-	unsigned long current_address;
 	const struct addr_marker *marker;
 	unsigned long lines;
 	bool to_dmesg;
 	bool check_wx;
 	unsigned long wx_pages;
+	struct seq_file *seq;
 };
 
 struct addr_marker {
@@ -174,11 +177,10 @@ static struct addr_marker address_markers[] = {
 /*
  * Print a readable form of a pgprot_t to the seq_file
  */
-static void printk_prot(struct seq_file *m, pgprot_t prot, int level, bool dmsg)
+static void printk_prot(struct seq_file *m, pgprotval_t pr, int level, bool dmsg)
 {
-	pgprotval_t pr = pgprot_val(prot);
 	static const char * const level_name[] =
-		{ "cr3", "pgd", "p4d", "pud", "pmd", "pte" };
+		{ "pgd", "p4d", "pud", "pmd", "pte" };
 
 	if (!(pr & _PAGE_PRESENT)) {
 		/* Not present */
@@ -202,12 +204,12 @@ static void printk_prot(struct seq_file *m, pgprot_t prot, int level, bool dmsg)
 			pt_dump_cont_printf(m, dmsg, "    ");
 
 		/* Bit 7 has a different meaning on level 3 vs 4 */
-		if (level <= 4 && pr & _PAGE_PSE)
+		if (level <= 3 && pr & _PAGE_PSE)
 			pt_dump_cont_printf(m, dmsg, "PSE ");
 		else
 			pt_dump_cont_printf(m, dmsg, "    ");
-		if ((level == 5 && pr & _PAGE_PAT) ||
-		    ((level == 4 || level == 3) && pr & _PAGE_PAT_LARGE))
+		if ((level == 4 && pr & _PAGE_PAT) ||
+		    ((level == 3 || level == 2) && pr & _PAGE_PAT_LARGE))
 			pt_dump_cont_printf(m, dmsg, "PAT ");
 		else
 			pt_dump_cont_printf(m, dmsg, "    ");
@@ -223,24 +225,11 @@ static void printk_prot(struct seq_file *m, pgprot_t prot, int level, bool dmsg)
 	pt_dump_cont_printf(m, dmsg, "%s\n", level_name[level]);
 }
 
-/*
- * On 64 bits, sign-extend the 48 bit address to 64 bit
- */
-static unsigned long normalize_addr(unsigned long u)
-{
-	int shift;
-	if (!IS_ENABLED(CONFIG_X86_64))
-		return u;
-
-	shift = 64 - (__VIRTUAL_MASK_SHIFT + 1);
-	return (signed long)(u << shift) >> shift;
-}
-
-static void note_wx(struct pg_state *st)
+static void note_wx(struct pg_state *st, unsigned long addr)
 {
 	unsigned long npages;
 
-	npages = (st->current_address - st->start_address) / PAGE_SIZE;
+	npages = (addr - st->start_address) / PAGE_SIZE;
 
 #ifdef CONFIG_PCI_BIOS
 	/*
@@ -248,7 +237,7 @@ static void note_wx(struct pg_state *st)
 	 * Inform about it, but avoid the warning.
 	 */
 	if (pcibios_enabled && st->start_address >= PAGE_OFFSET + BIOS_BEGIN &&
-	    st->current_address <= PAGE_OFFSET + BIOS_END) {
+	    addr <= PAGE_OFFSET + BIOS_END) {
 		pr_warn_once("x86/mm: PCI BIOS W+X mapping %lu pages\n", npages);
 		return;
 	}
@@ -260,27 +249,47 @@ static void note_wx(struct pg_state *st)
 		  (void *)st->start_address);
 }
 
+static inline pgprotval_t effective_prot(pgprotval_t prot1, pgprotval_t prot2)
+{
+	return (prot1 & prot2 & (_PAGE_USER | _PAGE_RW)) |
+	       ((prot1 | prot2) & _PAGE_NX);
+}
+
 /*
  * This function gets called on a break in a continuous series
  * of PTE entries; the next one is different so we need to
  * print what we collected so far.
  */
-static void note_page(struct seq_file *m, struct pg_state *st,
-		      pgprot_t new_prot, pgprotval_t new_eff, int level)
+static void note_page(struct ptdump_state *pt_st, unsigned long addr, int level,
+		      unsigned long val)
 {
-	pgprotval_t prot, cur, eff;
+	struct pg_state *st = container_of(pt_st, struct pg_state, ptdump);
+	pgprotval_t new_prot, new_eff;
+	pgprotval_t cur, eff;
 	static const char units[] = "BKMGTPE";
+	struct seq_file *m = st->seq;
+
+	new_prot = val & PTE_FLAGS_MASK;
+
+	if (level > 0) {
+		new_eff = effective_prot(st->prot_levels[level - 1],
+					 new_prot);
+	} else {
+		new_eff = new_prot;
+	}
+
+	if (level >= 0)
+		st->prot_levels[level] = new_eff;
 
 	/*
 	 * If we have a "break" in the series, we need to flush the state that
 	 * we have now. "break" is either changing perms, levels or
 	 * address space marker.
 	 */
-	prot = pgprot_val(new_prot);
-	cur = pgprot_val(st->current_prot);
+	cur = st->current_prot;
 	eff = st->effective_prot;
 
-	if (!st->level) {
+	if (st->level == -1) {
 		/* First entry */
 		st->current_prot = new_prot;
 		st->effective_prot = new_eff;
@@ -289,14 +298,14 @@ static void note_page(struct seq_file *m, struct pg_state *st,
 		st->lines = 0;
 		pt_dump_seq_printf(m, st->to_dmesg, "---[ %s ]---\n",
 				   st->marker->name);
-	} else if (prot != cur || new_eff != eff || level != st->level ||
-		   st->current_address >= st->marker[1].start_address) {
+	} else if (new_prot != cur || new_eff != eff || level != st->level ||
+		   addr >= st->marker[1].start_address) {
 		const char *unit = units;
 		unsigned long delta;
 		int width = sizeof(unsigned long) * 2;
 
 		if (st->check_wx && (eff & _PAGE_RW) && !(eff & _PAGE_NX))
-			note_wx(st);
+			note_wx(st, addr);
 
 		/*
 		 * Now print the actual finished series
@@ -306,9 +315,9 @@ static void note_page(struct seq_file *m, struct pg_state *st,
 			pt_dump_seq_printf(m, st->to_dmesg,
 					   "0x%0*lx-0x%0*lx   ",
 					   width, st->start_address,
-					   width, st->current_address);
+					   width, addr);
 
-			delta = st->current_address - st->start_address;
+			delta = addr - st->start_address;
 			while (!(delta & 1023) && unit[1]) {
 				delta >>= 10;
 				unit++;
@@ -325,7 +334,7 @@ static void note_page(struct seq_file *m, struct pg_state *st,
 		 * such as the start of vmalloc space etc.
 		 * This helps in the interpretation.
 		 */
-		if (st->current_address >= st->marker[1].start_address) {
+		if (addr >= st->marker[1].start_address) {
 			if (st->marker->max_lines &&
 			    st->lines > st->marker->max_lines) {
 				unsigned long nskip =
@@ -341,222 +350,45 @@ static void note_page(struct seq_file *m, struct pg_state *st,
 					   st->marker->name);
 		}
 
-		st->start_address = st->current_address;
+		st->start_address = addr;
 		st->current_prot = new_prot;
 		st->effective_prot = new_eff;
 		st->level = level;
 	}
 }
 
-static inline pgprotval_t effective_prot(pgprotval_t prot1, pgprotval_t prot2)
-{
-	return (prot1 & prot2 & (_PAGE_USER | _PAGE_RW)) |
-	       ((prot1 | prot2) & _PAGE_NX);
-}
-
-static void walk_pte_level(struct seq_file *m, struct pg_state *st, pmd_t addr,
-			   pgprotval_t eff_in, unsigned long P)
-{
-	int i;
-	pte_t *pte;
-	pgprotval_t prot, eff;
-
-	for (i = 0; i < PTRS_PER_PTE; i++) {
-		st->current_address = normalize_addr(P + i * PTE_LEVEL_MULT);
-		pte = pte_offset_map(&addr, st->current_address);
-		prot = pte_flags(*pte);
-		eff = effective_prot(eff_in, prot);
-		note_page(m, st, __pgprot(prot), eff, 5);
-		pte_unmap(pte);
-	}
-}
-#ifdef CONFIG_KASAN
-
-/*
- * This is an optimization for KASAN=y case. Since all kasan page tables
- * eventually point to the kasan_early_shadow_page we could call note_page()
- * right away without walking through lower level page tables. This saves
- * us dozens of seconds (minutes for 5-level config) while checking for
- * W+X mapping or reading kernel_page_tables debugfs file.
- */
-static inline bool kasan_page_table(struct seq_file *m, struct pg_state *st,
-				void *pt)
-{
-	if (__pa(pt) == __pa(kasan_early_shadow_pmd) ||
-	    (pgtable_l5_enabled() &&
-			__pa(pt) == __pa(kasan_early_shadow_p4d)) ||
-	    __pa(pt) == __pa(kasan_early_shadow_pud)) {
-		pgprotval_t prot = pte_flags(kasan_early_shadow_pte[0]);
-		note_page(m, st, __pgprot(prot), 0, 5);
-		return true;
-	}
-	return false;
-}
-#else
-static inline bool kasan_page_table(struct seq_file *m, struct pg_state *st,
-				void *pt)
-{
-	return false;
-}
-#endif
-
-#if PTRS_PER_PMD > 1
-
-static void walk_pmd_level(struct seq_file *m, struct pg_state *st, pud_t addr,
-			   pgprotval_t eff_in, unsigned long P)
-{
-	int i;
-	pmd_t *start, *pmd_start;
-	pgprotval_t prot, eff;
-
-	pmd_start = start = (pmd_t *)pud_page_vaddr(addr);
-	for (i = 0; i < PTRS_PER_PMD; i++) {
-		st->current_address = normalize_addr(P + i * PMD_LEVEL_MULT);
-		if (!pmd_none(*start)) {
-			prot = pmd_flags(*start);
-			eff = effective_prot(eff_in, prot);
-			if (pmd_large(*start) || !pmd_present(*start)) {
-				note_page(m, st, __pgprot(prot), eff, 4);
-			} else if (!kasan_page_table(m, st, pmd_start)) {
-				walk_pte_level(m, st, *start, eff,
-					       P + i * PMD_LEVEL_MULT);
-			}
-		} else
-			note_page(m, st, __pgprot(0), 0, 4);
-		start++;
-	}
-}
-
-#else
-#define walk_pmd_level(m,s,a,e,p) walk_pte_level(m,s,__pmd(pud_val(a)),e,p)
-#define pud_large(a) pmd_large(__pmd(pud_val(a)))
-#define pud_none(a)  pmd_none(__pmd(pud_val(a)))
-#endif
-
-#if PTRS_PER_PUD > 1
-
-static void walk_pud_level(struct seq_file *m, struct pg_state *st, p4d_t addr,
-			   pgprotval_t eff_in, unsigned long P)
-{
-	int i;
-	pud_t *start, *pud_start;
-	pgprotval_t prot, eff;
-
-	pud_start = start = (pud_t *)p4d_page_vaddr(addr);
-
-	for (i = 0; i < PTRS_PER_PUD; i++) {
-		st->current_address = normalize_addr(P + i * PUD_LEVEL_MULT);
-		if (!pud_none(*start)) {
-			prot = pud_flags(*start);
-			eff = effective_prot(eff_in, prot);
-			if (pud_large(*start) || !pud_present(*start)) {
-				note_page(m, st, __pgprot(prot), eff, 3);
-			} else if (!kasan_page_table(m, st, pud_start)) {
-				walk_pmd_level(m, st, *start, eff,
-					       P + i * PUD_LEVEL_MULT);
-			}
-		} else
-			note_page(m, st, __pgprot(0), 0, 3);
-
-		start++;
-	}
-}
-
-#else
-#define walk_pud_level(m,s,a,e,p) walk_pmd_level(m,s,__pud(p4d_val(a)),e,p)
-#define p4d_large(a) pud_large(__pud(p4d_val(a)))
-#define p4d_none(a)  pud_none(__pud(p4d_val(a)))
-#endif
-
-static void walk_p4d_level(struct seq_file *m, struct pg_state *st, pgd_t addr,
-			   pgprotval_t eff_in, unsigned long P)
-{
-	int i;
-	p4d_t *start, *p4d_start;
-	pgprotval_t prot, eff;
-
-	if (PTRS_PER_P4D == 1)
-		return walk_pud_level(m, st, __p4d(pgd_val(addr)), eff_in, P);
-
-	p4d_start = start = (p4d_t *)pgd_page_vaddr(addr);
-
-	for (i = 0; i < PTRS_PER_P4D; i++) {
-		st->current_address = normalize_addr(P + i * P4D_LEVEL_MULT);
-		if (!p4d_none(*start)) {
-			prot = p4d_flags(*start);
-			eff = effective_prot(eff_in, prot);
-			if (p4d_large(*start) || !p4d_present(*start)) {
-				note_page(m, st, __pgprot(prot), eff, 2);
-			} else if (!kasan_page_table(m, st, p4d_start)) {
-				walk_pud_level(m, st, *start, eff,
-					       P + i * P4D_LEVEL_MULT);
-			}
-		} else
-			note_page(m, st, __pgprot(0), 0, 2);
-
-		start++;
-	}
-}
-
-#define pgd_large(a) (pgtable_l5_enabled() ? pgd_large(a) : p4d_large(__p4d(pgd_val(a))))
-#define pgd_none(a)  (pgtable_l5_enabled() ? pgd_none(a) : p4d_none(__p4d(pgd_val(a))))
-
-static inline bool is_hypervisor_range(int idx)
-{
-#ifdef CONFIG_X86_64
-	/*
-	 * A hole in the beginning of kernel address space reserved
-	 * for a hypervisor.
-	 */
-	return	(idx >= pgd_index(GUARD_HOLE_BASE_ADDR)) &&
-		(idx <  pgd_index(GUARD_HOLE_END_ADDR));
-#else
-	return false;
-#endif
-}
-
-static void ptdump_walk_pgd_level_core(struct seq_file *m, pgd_t *pgd,
+static void ptdump_walk_pgd_level_core(struct seq_file *m,
+				       struct mm_struct *mm, pgd_t *pgd,
 				       bool checkwx, bool dmesg)
 {
-	pgd_t *start = INIT_PGD;
-	pgprotval_t prot, eff;
-	int i;
-	struct pg_state st = {};
-
-	if (pgd) {
-		start = pgd;
-		st.to_dmesg = dmesg;
-	}
+	const struct ptdump_range ptdump_ranges[] = {
+#ifdef CONFIG_X86_64
 
-	st.check_wx = checkwx;
-	if (checkwx)
-		st.wx_pages = 0;
+#define normalize_addr_shift (64 - (__VIRTUAL_MASK_SHIFT + 1))
+#define normalize_addr(u) ((signed long)((u) << normalize_addr_shift) >> \
+			   normalize_addr_shift)
 
-	for (i = 0; i < PTRS_PER_PGD; i++) {
-		st.current_address = normalize_addr(i * PGD_LEVEL_MULT);
-		if (!pgd_none(*start) && !is_hypervisor_range(i)) {
-			prot = pgd_flags(*start);
-#ifdef CONFIG_X86_PAE
-			eff = _PAGE_USER | _PAGE_RW;
+	{0, PTRS_PER_PGD * PGD_LEVEL_MULT / 2},
+	{normalize_addr(PTRS_PER_PGD * PGD_LEVEL_MULT / 2), ~0UL},
 #else
-			eff = prot;
+	{0, ~0UL},
 #endif
-			if (pgd_large(*start) || !pgd_present(*start)) {
-				note_page(m, &st, __pgprot(prot), eff, 1);
-			} else {
-				walk_p4d_level(m, &st, *start, eff,
-					       i * PGD_LEVEL_MULT);
-			}
-		} else
-			note_page(m, &st, __pgprot(0), 0, 1);
+	{0, 0}
+};
 
-		cond_resched();
-		start++;
-	}
+	struct pg_state st = {
+		.ptdump = {
+			.note_page	= note_page,
+			.range		= ptdump_ranges
+		},
+		.level = -1,
+		.to_dmesg	= dmesg,
+		.check_wx	= checkwx,
+		.seq		= m
+	};
+
+	ptdump_walk_pgd(&st.ptdump, mm, pgd);
 
-	/* Flush out the last page */
-	st.current_address = normalize_addr(PTRS_PER_PGD*PGD_LEVEL_MULT);
-	note_page(m, &st, __pgprot(0), 0, 0);
 	if (!checkwx)
 		return;
 	if (st.wx_pages)
@@ -566,18 +398,20 @@ static void ptdump_walk_pgd_level_core(struct seq_file *m, pgd_t *pgd,
 		pr_info("x86/mm: Checked W+X mappings: passed, no W+X pages found.\n");
 }
 
-void ptdump_walk_pgd_level(struct seq_file *m, pgd_t *pgd)
+void ptdump_walk_pgd_level(struct seq_file *m, struct mm_struct *mm)
 {
-	ptdump_walk_pgd_level_core(m, pgd, false, true);
+	ptdump_walk_pgd_level_core(m, mm, mm->pgd, false, true);
 }
 
-void ptdump_walk_pgd_level_debugfs(struct seq_file *m, pgd_t *pgd, bool user)
+void ptdump_walk_pgd_level_debugfs(struct seq_file *m, struct mm_struct *mm,
+				   bool user)
 {
+	pgd_t *pgd = mm->pgd;
 #ifdef CONFIG_PAGE_TABLE_ISOLATION
 	if (user && boot_cpu_has(X86_FEATURE_PTI))
 		pgd = kernel_to_user_pgdp(pgd);
 #endif
-	ptdump_walk_pgd_level_core(m, pgd, false, false);
+	ptdump_walk_pgd_level_core(m, mm, pgd, false, false);
 }
 EXPORT_SYMBOL_GPL(ptdump_walk_pgd_level_debugfs);
 
@@ -592,13 +426,13 @@ void ptdump_walk_user_pgd_level_checkwx(void)
 
 	pr_info("x86/mm: Checking user space page tables\n");
 	pgd = kernel_to_user_pgdp(pgd);
-	ptdump_walk_pgd_level_core(NULL, pgd, true, false);
+	ptdump_walk_pgd_level_core(NULL, &init_mm, pgd, true, false);
 #endif
 }
 
 void ptdump_walk_pgd_level_checkwx(void)
 {
-	ptdump_walk_pgd_level_core(NULL, NULL, true, false);
+	ptdump_walk_pgd_level_core(NULL, &init_mm, INIT_PGD, true, false);
 }
 
 static int __init pt_dump_init(void)
diff --git a/arch/x86/mm/hugetlbpage.c b/arch/x86/mm/hugetlbpage.c
index fab095362c50..5bfd5aef5378 100644
--- a/arch/x86/mm/hugetlbpage.c
+++ b/arch/x86/mm/hugetlbpage.c
@@ -19,7 +19,6 @@
 #include <asm/tlbflush.h>
 #include <asm/pgalloc.h>
 #include <asm/elf.h>
-#include <asm/mpx.h>
 
 #if 0	/* This is just for testing */
 struct page *
@@ -151,10 +150,6 @@ hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
 	if (len & ~huge_page_mask(h))
 		return -EINVAL;
 
-	addr = mpx_unmapped_area_check(addr, len, flags);
-	if (IS_ERR_VALUE(addr))
-		return addr;
-
 	if (len > TASK_SIZE)
 		return -ENOMEM;
 
diff --git a/arch/x86/mm/mmap.c b/arch/x86/mm/mmap.c
index aae9a933dfd4..cb91eccc4960 100644
--- a/arch/x86/mm/mmap.c
+++ b/arch/x86/mm/mmap.c
@@ -163,8 +163,6 @@ unsigned long get_mmap_base(int is_legacy)
 
 const char *arch_vma_name(struct vm_area_struct *vma)
 {
-	if (vma->vm_flags & VM_MPX)
-		return "[mpx]";
 	return NULL;
 }
 
diff --git a/arch/x86/mm/mpx.c b/arch/x86/mm/mpx.c
deleted file mode 100644
index 895fb7a9294d..000000000000
--- a/arch/x86/mm/mpx.c
+++ /dev/null
@@ -1,938 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * mpx.c - Memory Protection eXtensions
- *
- * Copyright (c) 2014, Intel Corporation.
- * Qiaowei Ren <qiaowei.ren@intel.com>
- * Dave Hansen <dave.hansen@intel.com>
- */
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/mm_types.h>
-#include <linux/mman.h>
-#include <linux/syscalls.h>
-#include <linux/sched/sysctl.h>
-
-#include <asm/insn.h>
-#include <asm/insn-eval.h>
-#include <asm/mmu_context.h>
-#include <asm/mpx.h>
-#include <asm/processor.h>
-#include <asm/fpu/internal.h>
-
-#define CREATE_TRACE_POINTS
-#include <asm/trace/mpx.h>
-
-static inline unsigned long mpx_bd_size_bytes(struct mm_struct *mm)
-{
-	if (is_64bit_mm(mm))
-		return MPX_BD_SIZE_BYTES_64;
-	else
-		return MPX_BD_SIZE_BYTES_32;
-}
-
-static inline unsigned long mpx_bt_size_bytes(struct mm_struct *mm)
-{
-	if (is_64bit_mm(mm))
-		return MPX_BT_SIZE_BYTES_64;
-	else
-		return MPX_BT_SIZE_BYTES_32;
-}
-
-/*
- * This is really a simplified "vm_mmap". it only handles MPX
- * bounds tables (the bounds directory is user-allocated).
- */
-static unsigned long mpx_mmap(unsigned long len)
-{
-	struct mm_struct *mm = current->mm;
-	unsigned long addr, populate;
-
-	/* Only bounds table can be allocated here */
-	if (len != mpx_bt_size_bytes(mm))
-		return -EINVAL;
-
-	down_write(&mm->mmap_sem);
-	addr = do_mmap(NULL, 0, len, PROT_READ | PROT_WRITE,
-		       MAP_ANONYMOUS | MAP_PRIVATE, VM_MPX, 0, &populate, NULL);
-	up_write(&mm->mmap_sem);
-	if (populate)
-		mm_populate(addr, populate);
-
-	return addr;
-}
-
-static int mpx_insn_decode(struct insn *insn,
-			   struct pt_regs *regs)
-{
-	unsigned char buf[MAX_INSN_SIZE];
-	int x86_64 = !test_thread_flag(TIF_IA32);
-	int not_copied;
-	int nr_copied;
-
-	not_copied = copy_from_user(buf, (void __user *)regs->ip, sizeof(buf));
-	nr_copied = sizeof(buf) - not_copied;
-	/*
-	 * The decoder _should_ fail nicely if we pass it a short buffer.
-	 * But, let's not depend on that implementation detail.  If we
-	 * did not get anything, just error out now.
-	 */
-	if (!nr_copied)
-		return -EFAULT;
-	insn_init(insn, buf, nr_copied, x86_64);
-	insn_get_length(insn);
-	/*
-	 * copy_from_user() tries to get as many bytes as we could see in
-	 * the largest possible instruction.  If the instruction we are
-	 * after is shorter than that _and_ we attempt to copy from
-	 * something unreadable, we might get a short read.  This is OK
-	 * as long as the read did not stop in the middle of the
-	 * instruction.  Check to see if we got a partial instruction.
-	 */
-	if (nr_copied < insn->length)
-		return -EFAULT;
-
-	insn_get_opcode(insn);
-	/*
-	 * We only _really_ need to decode bndcl/bndcn/bndcu
-	 * Error out on anything else.
-	 */
-	if (insn->opcode.bytes[0] != 0x0f)
-		goto bad_opcode;
-	if ((insn->opcode.bytes[1] != 0x1a) &&
-	    (insn->opcode.bytes[1] != 0x1b))
-		goto bad_opcode;
-
-	return 0;
-bad_opcode:
-	return -EINVAL;
-}
-
-/*
- * If a bounds overflow occurs then a #BR is generated. This
- * function decodes MPX instructions to get violation address
- * and set this address into extended struct siginfo.
- *
- * Note that this is not a super precise way of doing this.
- * Userspace could have, by the time we get here, written
- * anything it wants in to the instructions.  We can not
- * trust anything about it.  They might not be valid
- * instructions or might encode invalid registers, etc...
- */
-int mpx_fault_info(struct mpx_fault_info *info, struct pt_regs *regs)
-{
-	const struct mpx_bndreg_state *bndregs;
-	const struct mpx_bndreg *bndreg;
-	struct insn insn;
-	uint8_t bndregno;
-	int err;
-
-	err = mpx_insn_decode(&insn, regs);
-	if (err)
-		goto err_out;
-
-	/*
-	 * We know at this point that we are only dealing with
-	 * MPX instructions.
-	 */
-	insn_get_modrm(&insn);
-	bndregno = X86_MODRM_REG(insn.modrm.value);
-	if (bndregno > 3) {
-		err = -EINVAL;
-		goto err_out;
-	}
-	/* get bndregs field from current task's xsave area */
-	bndregs = get_xsave_field_ptr(XFEATURE_BNDREGS);
-	if (!bndregs) {
-		err = -EINVAL;
-		goto err_out;
-	}
-	/* now go select the individual register in the set of 4 */
-	bndreg = &bndregs->bndreg[bndregno];
-
-	/*
-	 * The registers are always 64-bit, but the upper 32
-	 * bits are ignored in 32-bit mode.  Also, note that the
-	 * upper bounds are architecturally represented in 1's
-	 * complement form.
-	 *
-	 * The 'unsigned long' cast is because the compiler
-	 * complains when casting from integers to different-size
-	 * pointers.
-	 */
-	info->lower = (void __user *)(unsigned long)bndreg->lower_bound;
-	info->upper = (void __user *)(unsigned long)~bndreg->upper_bound;
-	info->addr  = insn_get_addr_ref(&insn, regs);
-
-	/*
-	 * We were not able to extract an address from the instruction,
-	 * probably because there was something invalid in it.
-	 */
-	if (info->addr == (void __user *)-1) {
-		err = -EINVAL;
-		goto err_out;
-	}
-	trace_mpx_bounds_register_exception(info->addr, bndreg);
-	return 0;
-err_out:
-	/* info might be NULL, but kfree() handles that */
-	return err;
-}
-
-static __user void *mpx_get_bounds_dir(void)
-{
-	const struct mpx_bndcsr *bndcsr;
-
-	if (!cpu_feature_enabled(X86_FEATURE_MPX))
-		return MPX_INVALID_BOUNDS_DIR;
-
-	/*
-	 * The bounds directory pointer is stored in a register
-	 * only accessible if we first do an xsave.
-	 */
-	bndcsr = get_xsave_field_ptr(XFEATURE_BNDCSR);
-	if (!bndcsr)
-		return MPX_INVALID_BOUNDS_DIR;
-
-	/*
-	 * Make sure the register looks valid by checking the
-	 * enable bit.
-	 */
-	if (!(bndcsr->bndcfgu & MPX_BNDCFG_ENABLE_FLAG))
-		return MPX_INVALID_BOUNDS_DIR;
-
-	/*
-	 * Lastly, mask off the low bits used for configuration
-	 * flags, and return the address of the bounds table.
-	 */
-	return (void __user *)(unsigned long)
-		(bndcsr->bndcfgu & MPX_BNDCFG_ADDR_MASK);
-}
-
-int mpx_enable_management(void)
-{
-	void __user *bd_base = MPX_INVALID_BOUNDS_DIR;
-	struct mm_struct *mm = current->mm;
-	int ret = 0;
-
-	/*
-	 * runtime in the userspace will be responsible for allocation of
-	 * the bounds directory. Then, it will save the base of the bounds
-	 * directory into XSAVE/XRSTOR Save Area and enable MPX through
-	 * XRSTOR instruction.
-	 *
-	 * The copy_xregs_to_kernel() beneath get_xsave_field_ptr() is
-	 * expected to be relatively expensive. Storing the bounds
-	 * directory here means that we do not have to do xsave in the
-	 * unmap path; we can just use mm->context.bd_addr instead.
-	 */
-	bd_base = mpx_get_bounds_dir();
-	down_write(&mm->mmap_sem);
-
-	/* MPX doesn't support addresses above 47 bits yet. */
-	if (find_vma(mm, DEFAULT_MAP_WINDOW)) {
-		pr_warn_once("%s (%d): MPX cannot handle addresses "
-				"above 47-bits. Disabling.",
-				current->comm, current->pid);
-		ret = -ENXIO;
-		goto out;
-	}
-	mm->context.bd_addr = bd_base;
-	if (mm->context.bd_addr == MPX_INVALID_BOUNDS_DIR)
-		ret = -ENXIO;
-out:
-	up_write(&mm->mmap_sem);
-	return ret;
-}
-
-int mpx_disable_management(void)
-{
-	struct mm_struct *mm = current->mm;
-
-	if (!cpu_feature_enabled(X86_FEATURE_MPX))
-		return -ENXIO;
-
-	down_write(&mm->mmap_sem);
-	mm->context.bd_addr = MPX_INVALID_BOUNDS_DIR;
-	up_write(&mm->mmap_sem);
-	return 0;
-}
-
-static int mpx_cmpxchg_bd_entry(struct mm_struct *mm,
-		unsigned long *curval,
-		unsigned long __user *addr,
-		unsigned long old_val, unsigned long new_val)
-{
-	int ret;
-	/*
-	 * user_atomic_cmpxchg_inatomic() actually uses sizeof()
-	 * the pointer that we pass to it to figure out how much
-	 * data to cmpxchg.  We have to be careful here not to
-	 * pass a pointer to a 64-bit data type when we only want
-	 * a 32-bit copy.
-	 */
-	if (is_64bit_mm(mm)) {
-		ret = user_atomic_cmpxchg_inatomic(curval,
-				addr, old_val, new_val);
-	} else {
-		u32 uninitialized_var(curval_32);
-		u32 old_val_32 = old_val;
-		u32 new_val_32 = new_val;
-		u32 __user *addr_32 = (u32 __user *)addr;
-
-		ret = user_atomic_cmpxchg_inatomic(&curval_32,
-				addr_32, old_val_32, new_val_32);
-		*curval = curval_32;
-	}
-	return ret;
-}
-
-/*
- * With 32-bit mode, a bounds directory is 4MB, and the size of each
- * bounds table is 16KB. With 64-bit mode, a bounds directory is 2GB,
- * and the size of each bounds table is 4MB.
- */
-static int allocate_bt(struct mm_struct *mm, long __user *bd_entry)
-{
-	unsigned long expected_old_val = 0;
-	unsigned long actual_old_val = 0;
-	unsigned long bt_addr;
-	unsigned long bd_new_entry;
-	int ret = 0;
-
-	/*
-	 * Carve the virtual space out of userspace for the new
-	 * bounds table:
-	 */
-	bt_addr = mpx_mmap(mpx_bt_size_bytes(mm));
-	if (IS_ERR((void *)bt_addr))
-		return PTR_ERR((void *)bt_addr);
-	/*
-	 * Set the valid flag (kinda like _PAGE_PRESENT in a pte)
-	 */
-	bd_new_entry = bt_addr | MPX_BD_ENTRY_VALID_FLAG;
-
-	/*
-	 * Go poke the address of the new bounds table in to the
-	 * bounds directory entry out in userspace memory.  Note:
-	 * we may race with another CPU instantiating the same table.
-	 * In that case the cmpxchg will see an unexpected
-	 * 'actual_old_val'.
-	 *
-	 * This can fault, but that's OK because we do not hold
-	 * mmap_sem at this point, unlike some of the other part
-	 * of the MPX code that have to pagefault_disable().
-	 */
-	ret = mpx_cmpxchg_bd_entry(mm, &actual_old_val,	bd_entry,
-				   expected_old_val, bd_new_entry);
-	if (ret)
-		goto out_unmap;
-
-	/*
-	 * The user_atomic_cmpxchg_inatomic() will only return nonzero
-	 * for faults, *not* if the cmpxchg itself fails.  Now we must
-	 * verify that the cmpxchg itself completed successfully.
-	 */
-	/*
-	 * We expected an empty 'expected_old_val', but instead found
-	 * an apparently valid entry.  Assume we raced with another
-	 * thread to instantiate this table and desclare succecss.
-	 */
-	if (actual_old_val & MPX_BD_ENTRY_VALID_FLAG) {
-		ret = 0;
-		goto out_unmap;
-	}
-	/*
-	 * We found a non-empty bd_entry but it did not have the
-	 * VALID_FLAG set.  Return an error which will result in
-	 * a SEGV since this probably means that somebody scribbled
-	 * some invalid data in to a bounds table.
-	 */
-	if (expected_old_val != actual_old_val) {
-		ret = -EINVAL;
-		goto out_unmap;
-	}
-	trace_mpx_new_bounds_table(bt_addr);
-	return 0;
-out_unmap:
-	vm_munmap(bt_addr, mpx_bt_size_bytes(mm));
-	return ret;
-}
-
-/*
- * When a BNDSTX instruction attempts to save bounds to a bounds
- * table, it will first attempt to look up the table in the
- * first-level bounds directory.  If it does not find a table in
- * the directory, a #BR is generated and we get here in order to
- * allocate a new table.
- *
- * With 32-bit mode, the size of BD is 4MB, and the size of each
- * bound table is 16KB. With 64-bit mode, the size of BD is 2GB,
- * and the size of each bound table is 4MB.
- */
-static int do_mpx_bt_fault(void)
-{
-	unsigned long bd_entry, bd_base;
-	const struct mpx_bndcsr *bndcsr;
-	struct mm_struct *mm = current->mm;
-
-	bndcsr = get_xsave_field_ptr(XFEATURE_BNDCSR);
-	if (!bndcsr)
-		return -EINVAL;
-	/*
-	 * Mask off the preserve and enable bits
-	 */
-	bd_base = bndcsr->bndcfgu & MPX_BNDCFG_ADDR_MASK;
-	/*
-	 * The hardware provides the address of the missing or invalid
-	 * entry via BNDSTATUS, so we don't have to go look it up.
-	 */
-	bd_entry = bndcsr->bndstatus & MPX_BNDSTA_ADDR_MASK;
-	/*
-	 * Make sure the directory entry is within where we think
-	 * the directory is.
-	 */
-	if ((bd_entry < bd_base) ||
-	    (bd_entry >= bd_base + mpx_bd_size_bytes(mm)))
-		return -EINVAL;
-
-	return allocate_bt(mm, (long __user *)bd_entry);
-}
-
-int mpx_handle_bd_fault(void)
-{
-	/*
-	 * Userspace never asked us to manage the bounds tables,
-	 * so refuse to help.
-	 */
-	if (!kernel_managing_mpx_tables(current->mm))
-		return -EINVAL;
-
-	return do_mpx_bt_fault();
-}
-
-/*
- * A thin wrapper around get_user_pages().  Returns 0 if the
- * fault was resolved or -errno if not.
- */
-static int mpx_resolve_fault(long __user *addr, int write)
-{
-	long gup_ret;
-	int nr_pages = 1;
-
-	gup_ret = get_user_pages((unsigned long)addr, nr_pages,
-			write ? FOLL_WRITE : 0,	NULL, NULL);
-	/*
-	 * get_user_pages() returns number of pages gotten.
-	 * 0 means we failed to fault in and get anything,
-	 * probably because 'addr' is bad.
-	 */
-	if (!gup_ret)
-		return -EFAULT;
-	/* Other error, return it */
-	if (gup_ret < 0)
-		return gup_ret;
-	/* must have gup'd a page and gup_ret>0, success */
-	return 0;
-}
-
-static unsigned long mpx_bd_entry_to_bt_addr(struct mm_struct *mm,
-					     unsigned long bd_entry)
-{
-	unsigned long bt_addr = bd_entry;
-	int align_to_bytes;
-	/*
-	 * Bit 0 in a bt_entry is always the valid bit.
-	 */
-	bt_addr &= ~MPX_BD_ENTRY_VALID_FLAG;
-	/*
-	 * Tables are naturally aligned at 8-byte boundaries
-	 * on 64-bit and 4-byte boundaries on 32-bit.  The
-	 * documentation makes it appear that the low bits
-	 * are ignored by the hardware, so we do the same.
-	 */
-	if (is_64bit_mm(mm))
-		align_to_bytes = 8;
-	else
-		align_to_bytes = 4;
-	bt_addr &= ~(align_to_bytes-1);
-	return bt_addr;
-}
-
-/*
- * We only want to do a 4-byte get_user() on 32-bit.  Otherwise,
- * we might run off the end of the bounds table if we are on
- * a 64-bit kernel and try to get 8 bytes.
- */
-static int get_user_bd_entry(struct mm_struct *mm, unsigned long *bd_entry_ret,
-		long __user *bd_entry_ptr)
-{
-	u32 bd_entry_32;
-	int ret;
-
-	if (is_64bit_mm(mm))
-		return get_user(*bd_entry_ret, bd_entry_ptr);
-
-	/*
-	 * Note that get_user() uses the type of the *pointer* to
-	 * establish the size of the get, not the destination.
-	 */
-	ret = get_user(bd_entry_32, (u32 __user *)bd_entry_ptr);
-	*bd_entry_ret = bd_entry_32;
-	return ret;
-}
-
-/*
- * Get the base of bounds tables pointed by specific bounds
- * directory entry.
- */
-static int get_bt_addr(struct mm_struct *mm,
-			long __user *bd_entry_ptr,
-			unsigned long *bt_addr_result)
-{
-	int ret;
-	int valid_bit;
-	unsigned long bd_entry;
-	unsigned long bt_addr;
-
-	if (!access_ok((bd_entry_ptr), sizeof(*bd_entry_ptr)))
-		return -EFAULT;
-
-	while (1) {
-		int need_write = 0;
-
-		pagefault_disable();
-		ret = get_user_bd_entry(mm, &bd_entry, bd_entry_ptr);
-		pagefault_enable();
-		if (!ret)
-			break;
-		if (ret == -EFAULT)
-			ret = mpx_resolve_fault(bd_entry_ptr, need_write);
-		/*
-		 * If we could not resolve the fault, consider it
-		 * userspace's fault and error out.
-		 */
-		if (ret)
-			return ret;
-	}
-
-	valid_bit = bd_entry & MPX_BD_ENTRY_VALID_FLAG;
-	bt_addr = mpx_bd_entry_to_bt_addr(mm, bd_entry);
-
-	/*
-	 * When the kernel is managing bounds tables, a bounds directory
-	 * entry will either have a valid address (plus the valid bit)
-	 * *OR* be completely empty. If we see a !valid entry *and* some
-	 * data in the address field, we know something is wrong. This
-	 * -EINVAL return will cause a SIGSEGV.
-	 */
-	if (!valid_bit && bt_addr)
-		return -EINVAL;
-	/*
-	 * Do we have an completely zeroed bt entry?  That is OK.  It
-	 * just means there was no bounds table for this memory.  Make
-	 * sure to distinguish this from -EINVAL, which will cause
-	 * a SEGV.
-	 */
-	if (!valid_bit)
-		return -ENOENT;
-
-	*bt_addr_result = bt_addr;
-	return 0;
-}
-
-static inline int bt_entry_size_bytes(struct mm_struct *mm)
-{
-	if (is_64bit_mm(mm))
-		return MPX_BT_ENTRY_BYTES_64;
-	else
-		return MPX_BT_ENTRY_BYTES_32;
-}
-
-/*
- * Take a virtual address and turns it in to the offset in bytes
- * inside of the bounds table where the bounds table entry
- * controlling 'addr' can be found.
- */
-static unsigned long mpx_get_bt_entry_offset_bytes(struct mm_struct *mm,
-		unsigned long addr)
-{
-	unsigned long bt_table_nr_entries;
-	unsigned long offset = addr;
-
-	if (is_64bit_mm(mm)) {
-		/* Bottom 3 bits are ignored on 64-bit */
-		offset >>= 3;
-		bt_table_nr_entries = MPX_BT_NR_ENTRIES_64;
-	} else {
-		/* Bottom 2 bits are ignored on 32-bit */
-		offset >>= 2;
-		bt_table_nr_entries = MPX_BT_NR_ENTRIES_32;
-	}
-	/*
-	 * We know the size of the table in to which we are
-	 * indexing, and we have eliminated all the low bits
-	 * which are ignored for indexing.
-	 *
-	 * Mask out all the high bits which we do not need
-	 * to index in to the table.  Note that the tables
-	 * are always powers of two so this gives us a proper
-	 * mask.
-	 */
-	offset &= (bt_table_nr_entries-1);
-	/*
-	 * We now have an entry offset in terms of *entries* in
-	 * the table.  We need to scale it back up to bytes.
-	 */
-	offset *= bt_entry_size_bytes(mm);
-	return offset;
-}
-
-/*
- * How much virtual address space does a single bounds
- * directory entry cover?
- *
- * Note, we need a long long because 4GB doesn't fit in
- * to a long on 32-bit.
- */
-static inline unsigned long bd_entry_virt_space(struct mm_struct *mm)
-{
-	unsigned long long virt_space;
-	unsigned long long GB = (1ULL << 30);
-
-	/*
-	 * This covers 32-bit emulation as well as 32-bit kernels
-	 * running on 64-bit hardware.
-	 */
-	if (!is_64bit_mm(mm))
-		return (4ULL * GB) / MPX_BD_NR_ENTRIES_32;
-
-	/*
-	 * 'x86_virt_bits' returns what the hardware is capable
-	 * of, and returns the full >32-bit address space when
-	 * running 32-bit kernels on 64-bit hardware.
-	 */
-	virt_space = (1ULL << boot_cpu_data.x86_virt_bits);
-	return virt_space / MPX_BD_NR_ENTRIES_64;
-}
-
-/*
- * Free the backing physical pages of bounds table 'bt_addr'.
- * Assume start...end is within that bounds table.
- */
-static noinline int zap_bt_entries_mapping(struct mm_struct *mm,
-		unsigned long bt_addr,
-		unsigned long start_mapping, unsigned long end_mapping)
-{
-	struct vm_area_struct *vma;
-	unsigned long addr, len;
-	unsigned long start;
-	unsigned long end;
-
-	/*
-	 * if we 'end' on a boundary, the offset will be 0 which
-	 * is not what we want.  Back it up a byte to get the
-	 * last bt entry.  Then once we have the entry itself,
-	 * move 'end' back up by the table entry size.
-	 */
-	start = bt_addr + mpx_get_bt_entry_offset_bytes(mm, start_mapping);
-	end   = bt_addr + mpx_get_bt_entry_offset_bytes(mm, end_mapping - 1);
-	/*
-	 * Move end back up by one entry.  Among other things
-	 * this ensures that it remains page-aligned and does
-	 * not screw up zap_page_range()
-	 */
-	end += bt_entry_size_bytes(mm);
-
-	/*
-	 * Find the first overlapping vma. If vma->vm_start > start, there
-	 * will be a hole in the bounds table. This -EINVAL return will
-	 * cause a SIGSEGV.
-	 */
-	vma = find_vma(mm, start);
-	if (!vma || vma->vm_start > start)
-		return -EINVAL;
-
-	/*
-	 * A NUMA policy on a VM_MPX VMA could cause this bounds table to
-	 * be split. So we need to look across the entire 'start -> end'
-	 * range of this bounds table, find all of the VM_MPX VMAs, and
-	 * zap only those.
-	 */
-	addr = start;
-	while (vma && vma->vm_start < end) {
-		/*
-		 * We followed a bounds directory entry down
-		 * here.  If we find a non-MPX VMA, that's bad,
-		 * so stop immediately and return an error.  This
-		 * probably results in a SIGSEGV.
-		 */
-		if (!(vma->vm_flags & VM_MPX))
-			return -EINVAL;
-
-		len = min(vma->vm_end, end) - addr;
-		zap_page_range(vma, addr, len);
-		trace_mpx_unmap_zap(addr, addr+len);
-
-		vma = vma->vm_next;
-		addr = vma->vm_start;
-	}
-	return 0;
-}
-
-static unsigned long mpx_get_bd_entry_offset(struct mm_struct *mm,
-		unsigned long addr)
-{
-	/*
-	 * There are several ways to derive the bd offsets.  We
-	 * use the following approach here:
-	 * 1. We know the size of the virtual address space
-	 * 2. We know the number of entries in a bounds table
-	 * 3. We know that each entry covers a fixed amount of
-	 *    virtual address space.
-	 * So, we can just divide the virtual address by the
-	 * virtual space used by one entry to determine which
-	 * entry "controls" the given virtual address.
-	 */
-	if (is_64bit_mm(mm)) {
-		int bd_entry_size = 8; /* 64-bit pointer */
-		/*
-		 * Take the 64-bit addressing hole in to account.
-		 */
-		addr &= ((1UL << boot_cpu_data.x86_virt_bits) - 1);
-		return (addr / bd_entry_virt_space(mm)) * bd_entry_size;
-	} else {
-		int bd_entry_size = 4; /* 32-bit pointer */
-		/*
-		 * 32-bit has no hole so this case needs no mask
-		 */
-		return (addr / bd_entry_virt_space(mm)) * bd_entry_size;
-	}
-	/*
-	 * The two return calls above are exact copies.  If we
-	 * pull out a single copy and put it in here, gcc won't
-	 * realize that we're doing a power-of-2 divide and use
-	 * shifts.  It uses a real divide.  If we put them up
-	 * there, it manages to figure it out (gcc 4.8.3).
-	 */
-}
-
-static int unmap_entire_bt(struct mm_struct *mm,
-		long __user *bd_entry, unsigned long bt_addr)
-{
-	unsigned long expected_old_val = bt_addr | MPX_BD_ENTRY_VALID_FLAG;
-	unsigned long uninitialized_var(actual_old_val);
-	int ret;
-
-	while (1) {
-		int need_write = 1;
-		unsigned long cleared_bd_entry = 0;
-
-		pagefault_disable();
-		ret = mpx_cmpxchg_bd_entry(mm, &actual_old_val,
-				bd_entry, expected_old_val, cleared_bd_entry);
-		pagefault_enable();
-		if (!ret)
-			break;
-		if (ret == -EFAULT)
-			ret = mpx_resolve_fault(bd_entry, need_write);
-		/*
-		 * If we could not resolve the fault, consider it
-		 * userspace's fault and error out.
-		 */
-		if (ret)
-			return ret;
-	}
-	/*
-	 * The cmpxchg was performed, check the results.
-	 */
-	if (actual_old_val != expected_old_val) {
-		/*
-		 * Someone else raced with us to unmap the table.
-		 * That is OK, since we were both trying to do
-		 * the same thing.  Declare success.
-		 */
-		if (!actual_old_val)
-			return 0;
-		/*
-		 * Something messed with the bounds directory
-		 * entry.  We hold mmap_sem for read or write
-		 * here, so it could not be a _new_ bounds table
-		 * that someone just allocated.  Something is
-		 * wrong, so pass up the error and SIGSEGV.
-		 */
-		return -EINVAL;
-	}
-	/*
-	 * Note, we are likely being called under do_munmap() already. To
-	 * avoid recursion, do_munmap() will check whether it comes
-	 * from one bounds table through VM_MPX flag.
-	 */
-	return do_munmap(mm, bt_addr, mpx_bt_size_bytes(mm), NULL);
-}
-
-static int try_unmap_single_bt(struct mm_struct *mm,
-	       unsigned long start, unsigned long end)
-{
-	struct vm_area_struct *next;
-	struct vm_area_struct *prev;
-	/*
-	 * "bta" == Bounds Table Area: the area controlled by the
-	 * bounds table that we are unmapping.
-	 */
-	unsigned long bta_start_vaddr = start & ~(bd_entry_virt_space(mm)-1);
-	unsigned long bta_end_vaddr = bta_start_vaddr + bd_entry_virt_space(mm);
-	unsigned long uninitialized_var(bt_addr);
-	void __user *bde_vaddr;
-	int ret;
-	/*
-	 * We already unlinked the VMAs from the mm's rbtree so 'start'
-	 * is guaranteed to be in a hole. This gets us the first VMA
-	 * before the hole in to 'prev' and the next VMA after the hole
-	 * in to 'next'.
-	 */
-	next = find_vma_prev(mm, start, &prev);
-	/*
-	 * Do not count other MPX bounds table VMAs as neighbors.
-	 * Although theoretically possible, we do not allow bounds
-	 * tables for bounds tables so our heads do not explode.
-	 * If we count them as neighbors here, we may end up with
-	 * lots of tables even though we have no actual table
-	 * entries in use.
-	 */
-	while (next && (next->vm_flags & VM_MPX))
-		next = next->vm_next;
-	while (prev && (prev->vm_flags & VM_MPX))
-		prev = prev->vm_prev;
-	/*
-	 * We know 'start' and 'end' lie within an area controlled
-	 * by a single bounds table.  See if there are any other
-	 * VMAs controlled by that bounds table.  If there are not
-	 * then we can "expand" the are we are unmapping to possibly
-	 * cover the entire table.
-	 */
-	next = find_vma_prev(mm, start, &prev);
-	if ((!prev || prev->vm_end <= bta_start_vaddr) &&
-	    (!next || next->vm_start >= bta_end_vaddr)) {
-		/*
-		 * No neighbor VMAs controlled by same bounds
-		 * table.  Try to unmap the whole thing
-		 */
-		start = bta_start_vaddr;
-		end = bta_end_vaddr;
-	}
-
-	bde_vaddr = mm->context.bd_addr + mpx_get_bd_entry_offset(mm, start);
-	ret = get_bt_addr(mm, bde_vaddr, &bt_addr);
-	/*
-	 * No bounds table there, so nothing to unmap.
-	 */
-	if (ret == -ENOENT) {
-		ret = 0;
-		return 0;
-	}
-	if (ret)
-		return ret;
-	/*
-	 * We are unmapping an entire table.  Either because the
-	 * unmap that started this whole process was large enough
-	 * to cover an entire table, or that the unmap was small
-	 * but was the area covered by a bounds table.
-	 */
-	if ((start == bta_start_vaddr) &&
-	    (end == bta_end_vaddr))
-		return unmap_entire_bt(mm, bde_vaddr, bt_addr);
-	return zap_bt_entries_mapping(mm, bt_addr, start, end);
-}
-
-static int mpx_unmap_tables(struct mm_struct *mm,
-		unsigned long start, unsigned long end)
-{
-	unsigned long one_unmap_start;
-	trace_mpx_unmap_search(start, end);
-
-	one_unmap_start = start;
-	while (one_unmap_start < end) {
-		int ret;
-		unsigned long next_unmap_start = ALIGN(one_unmap_start+1,
-						       bd_entry_virt_space(mm));
-		unsigned long one_unmap_end = end;
-		/*
-		 * if the end is beyond the current bounds table,
-		 * move it back so we only deal with a single one
-		 * at a time
-		 */
-		if (one_unmap_end > next_unmap_start)
-			one_unmap_end = next_unmap_start;
-		ret = try_unmap_single_bt(mm, one_unmap_start, one_unmap_end);
-		if (ret)
-			return ret;
-
-		one_unmap_start = next_unmap_start;
-	}
-	return 0;
-}
-
-/*
- * Free unused bounds tables covered in a virtual address region being
- * munmap()ed. Assume end > start.
- *
- * This function will be called by do_munmap(), and the VMAs covering
- * the virtual address region start...end have already been split if
- * necessary, and the 'vma' is the first vma in this range (start -> end).
- */
-void mpx_notify_unmap(struct mm_struct *mm, unsigned long start,
-		      unsigned long end)
-{
-	struct vm_area_struct *vma;
-	int ret;
-
-	/*
-	 * Refuse to do anything unless userspace has asked
-	 * the kernel to help manage the bounds tables,
-	 */
-	if (!kernel_managing_mpx_tables(current->mm))
-		return;
-	/*
-	 * This will look across the entire 'start -> end' range,
-	 * and find all of the non-VM_MPX VMAs.
-	 *
-	 * To avoid recursion, if a VM_MPX vma is found in the range
-	 * (start->end), we will not continue follow-up work. This
-	 * recursion represents having bounds tables for bounds tables,
-	 * which should not occur normally. Being strict about it here
-	 * helps ensure that we do not have an exploitable stack overflow.
-	 */
-	vma = find_vma(mm, start);
-	while (vma && vma->vm_start < end) {
-		if (vma->vm_flags & VM_MPX)
-			return;
-		vma = vma->vm_next;
-	}
-
-	ret = mpx_unmap_tables(mm, start, end);
-	if (ret)
-		force_sig(SIGSEGV);
-}
-
-/* MPX cannot handle addresses above 47 bits yet. */
-unsigned long mpx_unmapped_area_check(unsigned long addr, unsigned long len,
-		unsigned long flags)
-{
-	if (!kernel_managing_mpx_tables(current->mm))
-		return addr;
-	if (addr + len <= DEFAULT_MAP_WINDOW)
-		return addr;
-	if (flags & MAP_FIXED)
-		return -ENOMEM;
-
-	/*
-	 * Requested len is larger than the whole area we're allowed to map in.
-	 * Resetting hinting address wouldn't do much good -- fail early.
-	 */
-	if (len > DEFAULT_MAP_WINDOW)
-		return -ENOMEM;
-
-	/* Look for unmap area within DEFAULT_MAP_WINDOW */
-	return 0;
-}
diff --git a/arch/x86/mm/pat/set_memory.c b/arch/x86/mm/pat/set_memory.c
index 62a8ebe72a52..c4aedd00c1ba 100644
--- a/arch/x86/mm/pat/set_memory.c
+++ b/arch/x86/mm/pat/set_memory.c
@@ -618,6 +618,17 @@ pte_t *lookup_address(unsigned long address, unsigned int *level)
 }
 EXPORT_SYMBOL_GPL(lookup_address);
 
+/*
+ * Lookup the page table entry for a virtual address in a given mm. Return a
+ * pointer to the entry and the level of the mapping.
+ */
+pte_t *lookup_address_in_mm(struct mm_struct *mm, unsigned long address,
+			    unsigned int *level)
+{
+	return lookup_address_in_pgd(pgd_offset(mm, address), address, level);
+}
+EXPORT_SYMBOL_GPL(lookup_address_in_mm);
+
 static pte_t *_lookup_address_cpa(struct cpa_data *cpa, unsigned long address,
 				  unsigned int *level)
 {
diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c
index 1e59df041456..df1d95913d4e 100644
--- a/arch/x86/pci/common.c
+++ b/arch/x86/pci/common.c
@@ -625,43 +625,6 @@ unsigned int pcibios_assign_all_busses(void)
 	return (pci_probe & PCI_ASSIGN_ALL_BUSSES) ? 1 : 0;
 }
 
-#if defined(CONFIG_X86_DEV_DMA_OPS) && defined(CONFIG_PCI_DOMAINS)
-static LIST_HEAD(dma_domain_list);
-static DEFINE_SPINLOCK(dma_domain_list_lock);
-
-void add_dma_domain(struct dma_domain *domain)
-{
-	spin_lock(&dma_domain_list_lock);
-	list_add(&domain->node, &dma_domain_list);
-	spin_unlock(&dma_domain_list_lock);
-}
-EXPORT_SYMBOL_GPL(add_dma_domain);
-
-void del_dma_domain(struct dma_domain *domain)
-{
-	spin_lock(&dma_domain_list_lock);
-	list_del(&domain->node);
-	spin_unlock(&dma_domain_list_lock);
-}
-EXPORT_SYMBOL_GPL(del_dma_domain);
-
-static void set_dma_domain_ops(struct pci_dev *pdev)
-{
-	struct dma_domain *domain;
-
-	spin_lock(&dma_domain_list_lock);
-	list_for_each_entry(domain, &dma_domain_list, node) {
-		if (pci_domain_nr(pdev->bus) == domain->domain_nr) {
-			pdev->dev.dma_ops = domain->dma_ops;
-			break;
-		}
-	}
-	spin_unlock(&dma_domain_list_lock);
-}
-#else
-static void set_dma_domain_ops(struct pci_dev *pdev) {}
-#endif
-
 static void set_dev_domain_options(struct pci_dev *pdev)
 {
 	if (is_vmd(pdev->bus))
@@ -697,7 +660,6 @@ int pcibios_add_device(struct pci_dev *dev)
 		pa_data = data->next;
 		memunmap(data);
 	}
-	set_dma_domain_ops(dev);
 	set_dev_domain_options(dev);
 	return 0;
 }
@@ -736,3 +698,13 @@ int pci_ext_cfg_avail(void)
 	else
 		return 0;
 }
+
+#if IS_ENABLED(CONFIG_VMD)
+struct pci_dev *pci_real_dma_dev(struct pci_dev *dev)
+{
+	if (is_vmd(dev->bus))
+		return to_pci_sysdata(dev->bus)->vmd_dev;
+
+	return dev;
+}
+#endif
diff --git a/arch/x86/platform/efi/efi_32.c b/arch/x86/platform/efi/efi_32.c
index 71dddd1620f9..081d466002c9 100644
--- a/arch/x86/platform/efi/efi_32.c
+++ b/arch/x86/platform/efi/efi_32.c
@@ -49,7 +49,7 @@ void efi_sync_low_kernel_mappings(void) {}
 void __init efi_dump_pagetable(void)
 {
 #ifdef CONFIG_EFI_PGT_DUMP
-	ptdump_walk_pgd_level(NULL, swapper_pg_dir);
+	ptdump_walk_pgd_level(NULL, &init_mm);
 #endif
 }
 
diff --git a/arch/x86/platform/efi/efi_64.c b/arch/x86/platform/efi/efi_64.c
index e2accfe636bd..fa8506e76bbe 100644
--- a/arch/x86/platform/efi/efi_64.c
+++ b/arch/x86/platform/efi/efi_64.c
@@ -471,9 +471,9 @@ void __init efi_dump_pagetable(void)
 {
 #ifdef CONFIG_EFI_PGT_DUMP
 	if (efi_have_uv1_memmap())
-		ptdump_walk_pgd_level(NULL, swapper_pg_dir);
+		ptdump_walk_pgd_level(NULL, &init_mm);
 	else
-		ptdump_walk_pgd_level(NULL, efi_mm.pgd);
+		ptdump_walk_pgd_level(NULL, &efi_mm);
 #endif
 }
 
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_tc35876x.c b/arch/x86/platform/intel-mid/device_libs/platform_tc35876x.c
index 44d1f884c3d3..139738bbdd36 100644
--- a/arch/x86/platform/intel-mid/device_libs/platform_tc35876x.c
+++ b/arch/x86/platform/intel-mid/device_libs/platform_tc35876x.c
@@ -6,21 +6,31 @@
  * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
  */
 
-#include <linux/gpio.h>
-#include <linux/platform_data/tc35876x.h>
+#include <linux/gpio/machine.h>
 #include <asm/intel-mid.h>
 
+static struct gpiod_lookup_table tc35876x_gpio_table = {
+	.dev_id	= "i2c_disp_brig",
+	.table	= {
+		GPIO_LOOKUP("0000:00:0c.0", -1, "bridge-reset", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("0000:00:0c.0", -1, "bl-en", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("0000:00:0c.0", -1, "vadd", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 /*tc35876x DSI_LVDS bridge chip and panel platform data*/
 static void *tc35876x_platform_data(void *data)
 {
-	static struct tc35876x_platform_data pdata;
+	struct gpiod_lookup_table *table = &tc35876x_gpio_table;
+	struct gpiod_lookup *lookup = table->table;
 
-	/* gpio pins set to -1 will not be used by the driver */
-	pdata.gpio_bridge_reset = get_gpio_by_name("LCMB_RXEN");
-	pdata.gpio_panel_bl_en = get_gpio_by_name("6S6P_BL_EN");
-	pdata.gpio_panel_vadd = get_gpio_by_name("EN_VREG_LCD_V3P3");
+	lookup[0].chip_hwnum = get_gpio_by_name("LCMB_RXEN");
+	lookup[1].chip_hwnum = get_gpio_by_name("6S6P_BL_EN");
+	lookup[2].chip_hwnum = get_gpio_by_name("EN_VREG_LCD_V3P3");
+	gpiod_add_lookup_table(table);
 
-	return &pdata;
+	return NULL;
 }
 
 static const struct devs_id tc35876x_dev_id __initconst = {
diff --git a/arch/x86/platform/uv/tlb_uv.c b/arch/x86/platform/uv/tlb_uv.c
index 5f0a96bf27a1..1fd321f37f1b 100644
--- a/arch/x86/platform/uv/tlb_uv.c
+++ b/arch/x86/platform/uv/tlb_uv.c
@@ -1668,12 +1668,12 @@ static int tunables_open(struct inode *inode, struct file *file)
 	return 0;
 }
 
-static const struct file_operations proc_uv_ptc_operations = {
-	.open		= ptc_proc_open,
-	.read		= seq_read,
-	.write		= ptc_proc_write,
-	.llseek		= seq_lseek,
-	.release	= seq_release,
+static const struct proc_ops uv_ptc_proc_ops = {
+	.proc_open	= ptc_proc_open,
+	.proc_read	= seq_read,
+	.proc_write	= ptc_proc_write,
+	.proc_lseek	= seq_lseek,
+	.proc_release	= seq_release,
 };
 
 static const struct file_operations tunables_fops = {
@@ -1691,7 +1691,7 @@ static int __init uv_ptc_init(void)
 		return 0;
 
 	proc_uv_ptc = proc_create(UV_PTC_BASENAME, 0444, NULL,
-				  &proc_uv_ptc_operations);
+				  &uv_ptc_proc_ops);
 	if (!proc_uv_ptc) {
 		pr_err("unable to create %s proc entry\n",
 		       UV_PTC_BASENAME);
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index 1c645172b4b5..32ee759a3fda 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -180,11 +180,11 @@ config HAVE_SMP
 	depends on XTENSA_VARIANT_CUSTOM
 	select XTENSA_MX
 	help
-	  This option is use to indicate that the system-on-a-chip (SOC)
+	  This option is used to indicate that the system-on-a-chip (SOC)
 	  supports Multiprocessing. Multiprocessor support implemented above
 	  the CPU core definition and currently needs to be selected manually.
 
-	  Multiprocessor support in implemented with external cache and
+	  Multiprocessor support is implemented with external cache and
 	  interrupt controllers.
 
 	  The MX interrupt distributer adds Interprocessor Interrupts
@@ -572,15 +572,41 @@ config KERNEL_LOAD_ADDRESS
 
 	  If unsure, leave the default value here.
 
-config VECTORS_OFFSET
-	hex "Kernel vectors offset"
-	default 0x00003000
-	depends on !XIP_KERNEL
+choice
+	prompt "Relocatable vectors location"
+	default XTENSA_VECTORS_IN_TEXT
 	help
-	  This is the offset of the kernel image from the relocatable vectors
-	  base.
+	  Choose whether relocatable vectors are merged into the kernel .text
+	  or placed separately at runtime. This option does not affect
+	  configurations without VECBASE register where vectors are always
+	  placed at their hardware-defined locations.
 
-	  If unsure, leave the default value here.
+config XTENSA_VECTORS_IN_TEXT
+	bool "Merge relocatable vectors into kernel text"
+	depends on !MTD_XIP
+	help
+	  This option puts relocatable vectors into the kernel .text section
+	  with proper alignment.
+	  This is a safe choice for most configurations.
+
+config XTENSA_VECTORS_SEPARATE
+	bool "Put relocatable vectors at fixed address"
+	help
+	  This option puts relocatable vectors at specific virtual address.
+	  Vectors are merged with the .init data in the kernel image and
+	  are copied into their designated location during kernel startup.
+	  Use it to put vectors into IRAM or out of FLASH on kernels with
+	  XIP-aware MTD support.
+
+endchoice
+
+config VECTORS_ADDR
+	hex "Kernel vectors virtual address"
+	default 0x00000000
+	depends on XTENSA_VECTORS_SEPARATE
+	help
+	  This is the virtual address of the (relocatable) vectors base.
+	  It must be within KSEG if MMU is used.
 
 config XIP_DATA_ADDR
 	hex "XIP kernel data virtual address"
diff --git a/arch/xtensa/configs/audio_kc705_defconfig b/arch/xtensa/configs/audio_kc705_defconfig
index b6367af71d65..eeb4c5383c83 100644
--- a/arch/xtensa/configs/audio_kc705_defconfig
+++ b/arch/xtensa/configs/audio_kc705_defconfig
@@ -21,8 +21,6 @@ CONFIG_PROFILING=y
 CONFIG_OPROFILE=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
 CONFIG_XTENSA_VARIANT_CUSTOM=y
 CONFIG_XTENSA_VARIANT_CUSTOM_NAME="test_kc705_hifi"
 CONFIG_XTENSA_UNALIGNED_USER=y
diff --git a/arch/xtensa/configs/cadence_csp_defconfig b/arch/xtensa/configs/cadence_csp_defconfig
index f4eef6decd2a..fc240737b14d 100644
--- a/arch/xtensa/configs/cadence_csp_defconfig
+++ b/arch/xtensa/configs/cadence_csp_defconfig
@@ -27,8 +27,6 @@ CONFIG_MODULES=y
 CONFIG_MODULE_FORCE_LOAD=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
 CONFIG_XTENSA_VARIANT_CUSTOM=y
 CONFIG_XTENSA_VARIANT_CUSTOM_NAME="csp"
 CONFIG_XTENSA_UNALIGNED_USER=y
diff --git a/arch/xtensa/configs/generic_kc705_defconfig b/arch/xtensa/configs/generic_kc705_defconfig
index c925165cf760..412f611033cc 100644
--- a/arch/xtensa/configs/generic_kc705_defconfig
+++ b/arch/xtensa/configs/generic_kc705_defconfig
@@ -21,8 +21,6 @@ CONFIG_PROFILING=y
 CONFIG_OPROFILE=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
 CONFIG_XTENSA_VARIANT_DC233C=y
 CONFIG_XTENSA_UNALIGNED_USER=y
 CONFIG_PREEMPT=y
diff --git a/arch/xtensa/configs/iss_defconfig b/arch/xtensa/configs/iss_defconfig
index d1c01742baf4..32ce8fb068f0 100644
--- a/arch/xtensa/configs/iss_defconfig
+++ b/arch/xtensa/configs/iss_defconfig
@@ -1,8 +1,6 @@
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_EXPERT=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
 # CONFIG_PCI is not set
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttyS0,38400 eth0=tuntap,,tap0 ip=192.168.168.5:192.168.168.1 root=nfs nfsroot=192.168.168.1:/opt/montavista/pro/devkit/xtensa/linux_be/target memmap=128M@0"
diff --git a/arch/xtensa/configs/nommu_kc705_defconfig b/arch/xtensa/configs/nommu_kc705_defconfig
index 380e366730d5..88b2e222d4bf 100644
--- a/arch/xtensa/configs/nommu_kc705_defconfig
+++ b/arch/xtensa/configs/nommu_kc705_defconfig
@@ -25,8 +25,6 @@ CONFIG_KALLSYMS_ALL=y
 CONFIG_PERF_EVENTS=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
 CONFIG_XTENSA_VARIANT_CUSTOM=y
 CONFIG_XTENSA_VARIANT_CUSTOM_NAME="de212"
 # CONFIG_XTENSA_VARIANT_MMU is not set
diff --git a/arch/xtensa/configs/smp_lx200_defconfig b/arch/xtensa/configs/smp_lx200_defconfig
index d46b58f34098..4f1c7998b030 100644
--- a/arch/xtensa/configs/smp_lx200_defconfig
+++ b/arch/xtensa/configs/smp_lx200_defconfig
@@ -21,8 +21,6 @@ CONFIG_PROFILING=y
 CONFIG_OPROFILE=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
 CONFIG_XTENSA_VARIANT_CUSTOM=y
 CONFIG_XTENSA_VARIANT_CUSTOM_NAME="test_mmuhifi_c3"
 CONFIG_XTENSA_UNALIGNED_USER=y
@@ -32,7 +30,6 @@ CONFIG_SMP=y
 CONFIG_HOTPLUG_CPU=y
 # CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX is not set
 # CONFIG_PCI is not set
-CONFIG_VECTORS_OFFSET=0x00002000
 CONFIG_XTENSA_PLATFORM_XTFPGA=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="earlycon=uart8250,mmio32native,0xfd050020,115200n8 console=ttyS0,115200n8 ip=dhcp root=/dev/nfs rw debug memmap=96M@0"
diff --git a/arch/xtensa/configs/virt_defconfig b/arch/xtensa/configs/virt_defconfig
index 4fddd8512350..6d1387dfa96f 100644
--- a/arch/xtensa/configs/virt_defconfig
+++ b/arch/xtensa/configs/virt_defconfig
@@ -19,7 +19,6 @@ CONFIG_KALLSYMS_ALL=y
 CONFIG_PERF_EVENTS=y
 CONFIG_XTENSA_VARIANT_DC233C=y
 CONFIG_XTENSA_UNALIGNED_USER=y
-CONFIG_VECTORS_OFFSET=0x00002000
 CONFIG_XTENSA_KSEG_512M=y
 CONFIG_HIGHMEM=y
 CONFIG_CMDLINE_BOOL=y
diff --git a/arch/xtensa/include/asm/Kbuild b/arch/xtensa/include/asm/Kbuild
index 3acc31e55e02..271917c24b7f 100644
--- a/arch/xtensa/include/asm/Kbuild
+++ b/arch/xtensa/include/asm/Kbuild
@@ -4,7 +4,6 @@ generic-y += bug.h
 generic-y += compat.h
 generic-y += device.h
 generic-y += div64.h
-generic-y += dma-contiguous.h
 generic-y += dma-mapping.h
 generic-y += emergency-restart.h
 generic-y += exec.h
diff --git a/arch/xtensa/include/asm/asmmacro.h b/arch/xtensa/include/asm/asmmacro.h
index 71a7e846bc1f..bfc89e11f469 100644
--- a/arch/xtensa/include/asm/asmmacro.h
+++ b/arch/xtensa/include/asm/asmmacro.h
@@ -237,4 +237,6 @@
 #error Unsupported Xtensa ABI
 #endif
 
+#define __XTENSA_HANDLER	.section ".exception.text", "ax"
+
 #endif /* _XTENSA_ASMMACRO_H */
diff --git a/arch/xtensa/include/asm/core.h b/arch/xtensa/include/asm/core.h
index 5b4acb7d1c07..5590b0f68837 100644
--- a/arch/xtensa/include/asm/core.h
+++ b/arch/xtensa/include/asm/core.h
@@ -10,10 +10,18 @@
 #define XCHAL_HAVE_EXCLUSIVE 0
 #endif
 
+#ifndef XCHAL_HAVE_EXTERN_REGS
+#define XCHAL_HAVE_EXTERN_REGS 0
+#endif
+
 #ifndef XCHAL_HAVE_MPU
 #define XCHAL_HAVE_MPU 0
 #endif
 
+#ifndef XCHAL_HAVE_VECBASE
+#define XCHAL_HAVE_VECBASE 0
+#endif
+
 #ifndef XCHAL_SPANNING_WAY
 #define XCHAL_SPANNING_WAY 0
 #endif
diff --git a/arch/xtensa/include/asm/platform.h b/arch/xtensa/include/asm/platform.h
index f2c48522c5a1..354ca942de40 100644
--- a/arch/xtensa/include/asm/platform.h
+++ b/arch/xtensa/include/asm/platform.h
@@ -12,8 +12,6 @@
 #define _XTENSA_PLATFORM_H
 
 #include <linux/types.h>
-#include <linux/pci.h>
-
 #include <asm/bootparam.h>
 
 /*
diff --git a/arch/xtensa/include/asm/processor.h b/arch/xtensa/include/asm/processor.h
index 6fa903daf2a2..7f63aca6a0d3 100644
--- a/arch/xtensa/include/asm/processor.h
+++ b/arch/xtensa/include/asm/processor.h
@@ -237,10 +237,6 @@ extern unsigned long get_wchan(struct task_struct *p);
 	 v; \
 	 })
 
-#ifndef XCHAL_HAVE_EXTERN_REGS
-#define XCHAL_HAVE_EXTERN_REGS 0
-#endif
-
 #if XCHAL_HAVE_EXTERN_REGS
 
 static inline void set_er(unsigned long value, unsigned long addr)
diff --git a/arch/xtensa/include/asm/vectors.h b/arch/xtensa/include/asm/vectors.h
index fd99b25037a7..704286c35640 100644
--- a/arch/xtensa/include/asm/vectors.h
+++ b/arch/xtensa/include/asm/vectors.h
@@ -34,13 +34,13 @@
 #endif
 
 #define RESET_VECTOR1_VADDR		(XCHAL_RESET_VECTOR1_VADDR)
-#ifdef CONFIG_VECTORS_OFFSET
-#define VECBASE_VADDR			(KERNELOFFSET - CONFIG_VECTORS_OFFSET)
+#ifdef CONFIG_VECTORS_ADDR
+#define VECBASE_VADDR			(CONFIG_VECTORS_ADDR)
 #else
 #define VECBASE_VADDR			_vecbase
 #endif
 
-#if defined(XCHAL_HAVE_VECBASE) && XCHAL_HAVE_VECBASE
+#if XCHAL_HAVE_VECBASE
 
 #define VECTOR_VADDR(offset)		(VECBASE_VADDR + offset)
 
diff --git a/arch/xtensa/include/uapi/asm/setup.h b/arch/xtensa/include/uapi/asm/setup.h
index 57e6c210e84f..5356a5fd4d17 100644
--- a/arch/xtensa/include/uapi/asm/setup.h
+++ b/arch/xtensa/include/uapi/asm/setup.h
@@ -14,6 +14,4 @@
 
 #define COMMAND_LINE_SIZE	256
 
-extern void set_except_vector(int n, void *addr);
-
 #endif
diff --git a/arch/xtensa/kernel/coprocessor.S b/arch/xtensa/kernel/coprocessor.S
index bb8e499b9900..c426b846beef 100644
--- a/arch/xtensa/kernel/coprocessor.S
+++ b/arch/xtensa/kernel/coprocessor.S
@@ -58,6 +58,8 @@
 	.endif;								\
 	.long THREAD_XTREGS_CP##x
 
+	__XTENSA_HANDLER
+
 	SAVE_CP_REGS(0)
 	SAVE_CP_REGS(1)
 	SAVE_CP_REGS(2)
@@ -76,7 +78,6 @@
 	LOAD_CP_REGS(6)
 	LOAD_CP_REGS(7)
 
-	.section ".rodata", "a"
 	.align 4
 .Lsave_cp_regs_jump_table:
 	SAVE_CP_REGS_TAB(0)
@@ -98,8 +99,6 @@
 	LOAD_CP_REGS_TAB(6)
 	LOAD_CP_REGS_TAB(7)
 
-	.previous
-
 /*
  * coprocessor_flush(struct thread_info*, index)
  *                             a2        a3
@@ -145,13 +144,6 @@ ENDPROC(coprocessor_flush)
  *	     <  VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception
  */
 
-ENTRY(fast_coprocessor_double)
-
-	wsr	a0, excsave1
-	call0	unrecoverable_exception
-
-ENDPROC(fast_coprocessor_double)
-
 ENTRY(fast_coprocessor)
 
 	/* Save remaining registers a1-a3 and SAR */
diff --git a/arch/xtensa/kernel/entry.S b/arch/xtensa/kernel/entry.S
index 2c9e48566e48..06fbb0a171f1 100644
--- a/arch/xtensa/kernel/entry.S
+++ b/arch/xtensa/kernel/entry.S
@@ -939,6 +939,9 @@ ENDPROC(unrecoverable_exception)
 
 /* -------------------------- FAST EXCEPTION HANDLERS ----------------------- */
 
+	__XTENSA_HANDLER
+	.literal_position
+
 /*
  * Fast-handler for alloca exceptions
  *
@@ -1024,7 +1027,7 @@ ENDPROC(fast_alloca)
 ENTRY(fast_illegal_instruction_user)
 
 	rsr	a0, ps
-	bbsi.l	a0, PS_WOE_BIT, user_exception
+	bbsi.l	a0, PS_WOE_BIT, 1f
 	s32i	a3, a2, PT_AREG3
 	movi	a3, PS_WOE_MASK
 	or	a0, a0, a3
@@ -1033,6 +1036,8 @@ ENTRY(fast_illegal_instruction_user)
 	l32i	a0, a2, PT_AREG0
 	rsr	a2, depc
 	rfe
+1:
+	call0	user_exception
 
 ENDPROC(fast_illegal_instruction_user)
 #endif
@@ -1071,7 +1076,7 @@ ENTRY(fast_syscall_user)
 	_beqz	a0, fast_syscall_spill_registers
 	_beqi	a0, __NR_xtensa, fast_syscall_xtensa
 
-	j	user_exception
+	call0	user_exception
 
 ENDPROC(fast_syscall_user)
 
@@ -1762,8 +1767,8 @@ ENTRY(fast_second_level_miss)
 
 	rsr	a2, ps
 	bbsi.l	a2, PS_UM_BIT, 1f
-	j	_kernel_exception
-1:	j	_user_exception
+	call0	_kernel_exception
+1:	call0	_user_exception
 
 ENDPROC(fast_second_level_miss)
 
@@ -1859,13 +1864,14 @@ ENTRY(fast_store_prohibited)
 
 	rsr	a2, ps
 	bbsi.l	a2, PS_UM_BIT, 1f
-	j	_kernel_exception
-1:	j	_user_exception
+	call0	_kernel_exception
+1:	call0	_user_exception
 
 ENDPROC(fast_store_prohibited)
 
 #endif /* CONFIG_MMU */
 
+	.text
 /*
  * System Calls.
  *
diff --git a/arch/xtensa/kernel/platform.c b/arch/xtensa/kernel/platform.c
index a95ba05b0abe..ac1e0e566995 100644
--- a/arch/xtensa/kernel/platform.c
+++ b/arch/xtensa/kernel/platform.c
@@ -12,12 +12,10 @@
  * Chris Zankel <chris@zankel.net>
  */
 
+#include <linux/printk.h>
 #include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/time.h>
 #include <asm/platform.h>
 #include <asm/timex.h>
-#include <asm/param.h>		/* HZ */
 
 #define _F(r,f,a,b)							\
 	r __platform_##f a b;                                   	\
@@ -28,6 +26,7 @@
  * (Please, refer to include/asm-xtensa/platform.h for more information)
  */
 
+_F(void, init, (bp_tag_t *first), { });
 _F(void, setup, (char** cmd), { });
 _F(void, restart, (void), { while(1); });
 _F(void, halt, (void), { while(1); });
diff --git a/arch/xtensa/kernel/setup.c b/arch/xtensa/kernel/setup.c
index 0f93b67c7a5a..3880c765d448 100644
--- a/arch/xtensa/kernel/setup.c
+++ b/arch/xtensa/kernel/setup.c
@@ -284,6 +284,8 @@ extern char _UserExceptionVector_text_start;
 extern char _UserExceptionVector_text_end;
 extern char _DoubleExceptionVector_text_start;
 extern char _DoubleExceptionVector_text_end;
+extern char _exception_text_start;
+extern char _exception_text_end;
 #if XCHAL_EXCM_LEVEL >= 2
 extern char _Level2InterruptVector_text_start;
 extern char _Level2InterruptVector_text_end;
@@ -347,7 +349,7 @@ void __init setup_arch(char **cmdline_p)
 	mem_reserve(__pa(_xip_start), __pa(_xip_end));
 #endif
 
-#ifdef CONFIG_VECTORS_OFFSET
+#ifdef CONFIG_VECTORS_ADDR
 	mem_reserve(__pa(&_WindowVectors_text_start),
 		    __pa(&_WindowVectors_text_end));
 
@@ -363,6 +365,8 @@ void __init setup_arch(char **cmdline_p)
 	mem_reserve(__pa(&_DoubleExceptionVector_text_start),
 		    __pa(&_DoubleExceptionVector_text_end));
 
+	mem_reserve(__pa(&_exception_text_start),
+		    __pa(&_exception_text_end));
 #if XCHAL_EXCM_LEVEL >= 2
 	mem_reserve(__pa(&_Level2InterruptVector_text_start),
 		    __pa(&_Level2InterruptVector_text_end));
@@ -384,7 +388,7 @@ void __init setup_arch(char **cmdline_p)
 		    __pa(&_Level6InterruptVector_text_end));
 #endif
 
-#endif /* CONFIG_VECTORS_OFFSET */
+#endif /* CONFIG_VECTORS_ADDR */
 
 #ifdef CONFIG_SMP
 	mem_reserve(__pa(&_SecondaryResetVector_text_start),
@@ -405,8 +409,6 @@ void __init setup_arch(char **cmdline_p)
 #ifdef CONFIG_VT
 # if defined(CONFIG_VGA_CONSOLE)
 	conswitchp = &vga_con;
-# elif defined(CONFIG_DUMMY_CONSOLE)
-	conswitchp = &dummy_con;
 # endif
 #endif
 }
diff --git a/arch/xtensa/kernel/syscalls/syscall.tbl b/arch/xtensa/kernel/syscalls/syscall.tbl
index 25f4de729a6d..85a9ab1bc04d 100644
--- a/arch/xtensa/kernel/syscalls/syscall.tbl
+++ b/arch/xtensa/kernel/syscalls/syscall.tbl
@@ -406,3 +406,5 @@
 433	common	fspick				sys_fspick
 434	common	pidfd_open			sys_pidfd_open
 435	common	clone3				sys_clone3
+437	common	openat2				sys_openat2
+438	common	pidfd_getfd			sys_pidfd_getfd
diff --git a/arch/xtensa/kernel/vectors.S b/arch/xtensa/kernel/vectors.S
index 841503d3307c..95ad1e773991 100644
--- a/arch/xtensa/kernel/vectors.S
+++ b/arch/xtensa/kernel/vectors.S
@@ -43,6 +43,7 @@
  */
 
 #include <linux/linkage.h>
+#include <asm/asmmacro.h>
 #include <asm/ptrace.h>
 #include <asm/current.h>
 #include <asm/asm-offsets.h>
@@ -477,7 +478,6 @@ _DoubleExceptionVector_handle_exception:
 
 ENDPROC(_DoubleExceptionVector)
 
-	.text
 /*
  * Fixup handler for TLB miss in double exception handler for window owerflow.
  * We get here with windowbase set to the window that was being spilled and
@@ -505,6 +505,7 @@ ENDPROC(_DoubleExceptionVector)
  * a3: exctable, original value in excsave1
  */
 
+	__XTENSA_HANDLER
 	.literal_position
 
 ENTRY(window_overflow_restore_a0_fixup)
diff --git a/arch/xtensa/kernel/vmlinux.lds.S b/arch/xtensa/kernel/vmlinux.lds.S
index 409c05cac15e..d23a6e38f062 100644
--- a/arch/xtensa/kernel/vmlinux.lds.S
+++ b/arch/xtensa/kernel/vmlinux.lds.S
@@ -47,15 +47,20 @@ jiffies = jiffies_64;
 	LONG(sym ## _end);			\
 	LONG(LOADADDR(section))
 
+#if !defined(CONFIG_VECTORS_ADDR) && XCHAL_HAVE_VECBASE
+#define MERGED_VECTORS 1
+#else
+#define MERGED_VECTORS 0
+#endif
+
 /*
- * Macro to define a section for a vector. When CONFIG_VECTORS_OFFSET is
- * defined code for every vector is located with other init data. At startup
+ * Macro to define a section for a vector. When MERGED_VECTORS is 0
+ * code for every vector is located with other init data. At startup
  * time head.S copies code for every vector to its final position according
  * to description recorded in the corresponding RELOCATE_ENTRY.
  */
 
-#ifdef CONFIG_VECTORS_OFFSET
-#define SECTION_VECTOR(sym, section, addr, prevsec)                         \
+#define SECTION_VECTOR4(sym, section, addr, prevsec)			    \
   section addr : AT(((LOADADDR(prevsec) + SIZEOF(prevsec)) + 3) & ~ 3)      \
   {									    \
     . = ALIGN(4);							    \
@@ -63,11 +68,10 @@ jiffies = jiffies_64;
     *(section)								    \
     sym ## _end = ABSOLUTE(.);						    \
   }
-#else
-#define SECTION_VECTOR(section, addr)					    \
+
+#define SECTION_VECTOR2(section, addr)					    \
   . = addr;								    \
   *(section)
-#endif
 
 /*
  *  Mapping of input sections to output sections when linking.
@@ -86,30 +90,32 @@ SECTIONS
     /* The HEAD_TEXT section must be the first section! */
     HEAD_TEXT
 
-#ifndef CONFIG_VECTORS_OFFSET
-  . = ALIGN(PAGE_SIZE);
-  _vecbase = .;
+#if MERGED_VECTORS
+    . = ALIGN(PAGE_SIZE);
+    _vecbase = .;
 
-  SECTION_VECTOR (.WindowVectors.text, WINDOW_VECTORS_VADDR)
+    SECTION_VECTOR2 (.WindowVectors.text, WINDOW_VECTORS_VADDR)
 #if XCHAL_EXCM_LEVEL >= 2
-  SECTION_VECTOR (.Level2InterruptVector.text, INTLEVEL2_VECTOR_VADDR)
+    SECTION_VECTOR2 (.Level2InterruptVector.text, INTLEVEL2_VECTOR_VADDR)
 #endif
 #if XCHAL_EXCM_LEVEL >= 3
-  SECTION_VECTOR (.Level3InterruptVector.text, INTLEVEL3_VECTOR_VADDR)
+    SECTION_VECTOR2 (.Level3InterruptVector.text, INTLEVEL3_VECTOR_VADDR)
 #endif
 #if XCHAL_EXCM_LEVEL >= 4
-  SECTION_VECTOR (.Level4InterruptVector.text, INTLEVEL4_VECTOR_VADDR)
+    SECTION_VECTOR2 (.Level4InterruptVector.text, INTLEVEL4_VECTOR_VADDR)
 #endif
 #if XCHAL_EXCM_LEVEL >= 5
-  SECTION_VECTOR (.Level5InterruptVector.text, INTLEVEL5_VECTOR_VADDR)
+    SECTION_VECTOR2 (.Level5InterruptVector.text, INTLEVEL5_VECTOR_VADDR)
 #endif
 #if XCHAL_EXCM_LEVEL >= 6
-  SECTION_VECTOR (.Level6InterruptVector.text, INTLEVEL6_VECTOR_VADDR)
+    SECTION_VECTOR2 (.Level6InterruptVector.text, INTLEVEL6_VECTOR_VADDR)
 #endif
-  SECTION_VECTOR (.DebugInterruptVector.text, DEBUG_VECTOR_VADDR)
-  SECTION_VECTOR (.KernelExceptionVector.text, KERNEL_VECTOR_VADDR)
-  SECTION_VECTOR (.UserExceptionVector.text, USER_VECTOR_VADDR)
-  SECTION_VECTOR (.DoubleExceptionVector.text, DOUBLEEXC_VECTOR_VADDR)
+    SECTION_VECTOR2 (.DebugInterruptVector.text, DEBUG_VECTOR_VADDR)
+    SECTION_VECTOR2 (.KernelExceptionVector.text, KERNEL_VECTOR_VADDR)
+    SECTION_VECTOR2 (.UserExceptionVector.text, USER_VECTOR_VADDR)
+    SECTION_VECTOR2 (.DoubleExceptionVector.text, DOUBLEEXC_VECTOR_VADDR)
+
+    *(.exception.text)
 #endif
 
     IRQENTRY_TEXT
@@ -159,7 +165,7 @@ SECTIONS
     . = ALIGN(16);
     __boot_reloc_table_start = ABSOLUTE(.);
 
-#ifdef CONFIG_VECTORS_OFFSET
+#if !MERGED_VECTORS
     RELOCATE_ENTRY(_WindowVectors_text,
 		   .WindowVectors.text);
 #if XCHAL_EXCM_LEVEL >= 2
@@ -190,16 +196,17 @@ SECTIONS
 		   .DoubleExceptionVector.text);
     RELOCATE_ENTRY(_DebugInterruptVector_text,
 		   .DebugInterruptVector.text);
+    RELOCATE_ENTRY(_exception_text,
+		   .exception.text);
 #endif
 #ifdef CONFIG_XIP_KERNEL
     RELOCATE_ENTRY(_xip_data, .data);
     RELOCATE_ENTRY(_xip_init_data, .init.data);
-#else
+#endif
 #if defined(CONFIG_SMP)
     RELOCATE_ENTRY(_SecondaryResetVector_text,
 		   .SecondaryResetVector.text);
 #endif
-#endif
 
     __boot_reloc_table_end = ABSOLUTE(.) ;
 
@@ -216,21 +223,24 @@ SECTIONS
   . = ALIGN(4);
   .dummy : { LONG(0) }
 
-#ifdef CONFIG_VECTORS_OFFSET
+#undef LAST
+#define LAST	.dummy
+
+#if !MERGED_VECTORS
   /* The vectors are relocated to the real position at startup time */
 
-  SECTION_VECTOR (_WindowVectors_text,
+  SECTION_VECTOR4 (_WindowVectors_text,
 		  .WindowVectors.text,
 		  WINDOW_VECTORS_VADDR,
 		  .dummy)
-  SECTION_VECTOR (_DebugInterruptVector_text,
+  SECTION_VECTOR4 (_DebugInterruptVector_text,
 		  .DebugInterruptVector.text,
 		  DEBUG_VECTOR_VADDR,
 		  .WindowVectors.text)
 #undef LAST
 #define LAST	.DebugInterruptVector.text
 #if XCHAL_EXCM_LEVEL >= 2
-  SECTION_VECTOR (_Level2InterruptVector_text,
+  SECTION_VECTOR4 (_Level2InterruptVector_text,
 		  .Level2InterruptVector.text,
 		  INTLEVEL2_VECTOR_VADDR,
 		  LAST)
@@ -238,7 +248,7 @@ SECTIONS
 # define LAST	.Level2InterruptVector.text
 #endif
 #if XCHAL_EXCM_LEVEL >= 3
-  SECTION_VECTOR (_Level3InterruptVector_text,
+  SECTION_VECTOR4 (_Level3InterruptVector_text,
 		  .Level3InterruptVector.text,
 		  INTLEVEL3_VECTOR_VADDR,
 		  LAST)
@@ -246,7 +256,7 @@ SECTIONS
 # define LAST	.Level3InterruptVector.text
 #endif
 #if XCHAL_EXCM_LEVEL >= 4
-  SECTION_VECTOR (_Level4InterruptVector_text,
+  SECTION_VECTOR4 (_Level4InterruptVector_text,
 		  .Level4InterruptVector.text,
 		  INTLEVEL4_VECTOR_VADDR,
 		  LAST)
@@ -254,7 +264,7 @@ SECTIONS
 # define LAST	.Level4InterruptVector.text
 #endif
 #if XCHAL_EXCM_LEVEL >= 5
-  SECTION_VECTOR (_Level5InterruptVector_text,
+  SECTION_VECTOR4 (_Level5InterruptVector_text,
 		  .Level5InterruptVector.text,
 		  INTLEVEL5_VECTOR_VADDR,
 		  LAST)
@@ -262,41 +272,51 @@ SECTIONS
 # define LAST	.Level5InterruptVector.text
 #endif
 #if XCHAL_EXCM_LEVEL >= 6
-  SECTION_VECTOR (_Level6InterruptVector_text,
+  SECTION_VECTOR4 (_Level6InterruptVector_text,
 		  .Level6InterruptVector.text,
 		  INTLEVEL6_VECTOR_VADDR,
 		  LAST)
 # undef LAST
 # define LAST	.Level6InterruptVector.text
 #endif
-  SECTION_VECTOR (_KernelExceptionVector_text,
+  SECTION_VECTOR4 (_KernelExceptionVector_text,
 		  .KernelExceptionVector.text,
 		  KERNEL_VECTOR_VADDR,
 		  LAST)
 #undef LAST
-  SECTION_VECTOR (_UserExceptionVector_text,
+  SECTION_VECTOR4 (_UserExceptionVector_text,
 		  .UserExceptionVector.text,
 		  USER_VECTOR_VADDR,
 		  .KernelExceptionVector.text)
-  SECTION_VECTOR (_DoubleExceptionVector_text,
+  SECTION_VECTOR4 (_DoubleExceptionVector_text,
 		  .DoubleExceptionVector.text,
 		  DOUBLEEXC_VECTOR_VADDR,
 		  .UserExceptionVector.text)
-
-  . = (LOADADDR( .DoubleExceptionVector.text ) + SIZEOF( .DoubleExceptionVector.text ) + 3) & ~ 3;
+#define LAST .DoubleExceptionVector.text
 
 #endif
-#if !defined(CONFIG_XIP_KERNEL) && defined(CONFIG_SMP)
+#if defined(CONFIG_SMP)
 
-  SECTION_VECTOR (_SecondaryResetVector_text,
+  SECTION_VECTOR4 (_SecondaryResetVector_text,
 		  .SecondaryResetVector.text,
 		  RESET_VECTOR1_VADDR,
-		  .DoubleExceptionVector.text)
+		  LAST)
+#undef LAST
+#define LAST .SecondaryResetVector.text
 
-  . = LOADADDR(.SecondaryResetVector.text)+SIZEOF(.SecondaryResetVector.text);
+#endif
+#if !MERGED_VECTORS
+  SECTION_VECTOR4 (_exception_text,
+		  .exception.text,
+		  ,
+		  LAST)
+#undef LAST
+#define LAST .exception.text
 
 #endif
+  . = (LOADADDR(LAST) + SIZEOF(LAST) + 3) & ~ 3;
 
+  .dummy1 : AT(ADDR(.dummy1)) { LONG(0) }
   . = ALIGN(PAGE_SIZE);
 
 #ifndef CONFIG_XIP_KERNEL
@@ -314,7 +334,7 @@ SECTIONS
 
 #undef LOAD_OFFSET
 #define LOAD_OFFSET \
-  (CONFIG_XIP_DATA_ADDR - (LOADADDR(.dummy) + SIZEOF(.dummy) + 3) & ~ 3)
+  (CONFIG_XIP_DATA_ADDR - (LOADADDR(.dummy1) + SIZEOF(.dummy1) + 3) & ~ 3)
 
   _xip_data_start = .;
   _sdata = .;
diff --git a/arch/xtensa/platforms/iss/include/platform/simcall.h b/arch/xtensa/platforms/iss/include/platform/simcall.h
index 2ba45858e50a..f42870ab551b 100644
--- a/arch/xtensa/platforms/iss/include/platform/simcall.h
+++ b/arch/xtensa/platforms/iss/include/platform/simcall.h
@@ -66,19 +66,17 @@ static int errno;
 
 static inline int __simc(int a, int b, int c, int d)
 {
-	int ret;
 	register int a1 asm("a2") = a;
 	register int b1 asm("a3") = b;
 	register int c1 asm("a4") = c;
 	register int d1 asm("a5") = d;
 	__asm__ __volatile__ (
 			"simcall\n"
-			"mov %0, a2\n"
-			"mov %1, a3\n"
-			: "=a" (ret), "=a" (errno), "+r"(a1), "+r"(b1)
+			: "+r"(a1), "+r"(b1)
 			: "r"(c1), "r"(d1)
 			: "memory");
-	return ret;
+	errno = b1;
+	return a1;
 }
 
 static inline int simc_exit(int exit_code)
@@ -113,9 +111,9 @@ static inline int simc_write(int fd, const void *buf, size_t count)
 
 static inline int simc_poll(int fd)
 {
-	struct timeval tv = { .tv_sec = 0, .tv_usec = 0 };
+	long timeval[2] = { 0, 0 };
 
-	return __simc(SYS_select_one, fd, XTISS_SELECT_ONE_READ, (int)&tv);
+	return __simc(SYS_select_one, fd, XTISS_SELECT_ONE_READ, (int)&timeval);
 }
 
 static inline int simc_lseek(int fd, uint32_t off, int whence)
diff --git a/arch/xtensa/platforms/iss/setup.c b/arch/xtensa/platforms/iss/setup.c
index e28dd53d7df5..ed519aee0ec8 100644
--- a/arch/xtensa/platforms/iss/setup.c
+++ b/arch/xtensa/platforms/iss/setup.c
@@ -11,32 +11,18 @@
  * Copyright 2001 - 2005 Tensilica Inc.
  * Copyright 2017 Cadence Design Systems Inc.
  */
-#include <linux/memblock.h>
-#include <linux/stddef.h>
-#include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/kdev_t.h>
-#include <linux/types.h>
-#include <linux/major.h>
-#include <linux/blkdev.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/stringify.h>
+#include <linux/kernel.h>
 #include <linux/notifier.h>
+#include <linux/printk.h>
+#include <linux/string.h>
 
 #include <asm/platform.h>
-#include <asm/bootparam.h>
 #include <asm/setup.h>
 
 #include <platform/simcall.h>
 
 
-void __init platform_init(bp_tag_t* bootparam)
-{
-}
-
 void platform_halt(void)
 {
 	pr_info(" ** Called platform_halt() **\n");
@@ -48,6 +34,7 @@ void platform_power_off(void)
 	pr_info(" ** Called platform_power_off() **\n");
 	simc_exit(0);
 }
+
 void platform_restart(void)
 {
 	/* Flush and reset the mmu, simulate a processor reset, and
@@ -56,10 +43,6 @@ void platform_restart(void)
 	/* control never gets here */
 }
 
-void platform_heartbeat(void)
-{
-}
-
 static int
 iss_panic_event(struct notifier_block *this, unsigned long event, void *ptr)
 {
diff --git a/arch/xtensa/platforms/iss/simdisk.c b/arch/xtensa/platforms/iss/simdisk.c
index f9cd45860bee..833109880165 100644
--- a/arch/xtensa/platforms/iss/simdisk.c
+++ b/arch/xtensa/platforms/iss/simdisk.c
@@ -251,10 +251,10 @@ out_free:
 	return err;
 }
 
-static const struct file_operations fops = {
-	.read = proc_read_simdisk,
-	.write = proc_write_simdisk,
-	.llseek = default_llseek,
+static const struct proc_ops simdisk_proc_ops = {
+	.proc_read	= proc_read_simdisk,
+	.proc_write	= proc_write_simdisk,
+	.proc_lseek	= default_llseek,
 };
 
 static int __init simdisk_setup(struct simdisk *dev, int which,
@@ -290,7 +290,7 @@ static int __init simdisk_setup(struct simdisk *dev, int which,
 	set_capacity(dev->gd, 0);
 	add_disk(dev->gd);
 
-	dev->procfile = proc_create_data(tmp, 0644, procdir, &fops, dev);
+	dev->procfile = proc_create_data(tmp, 0644, procdir, &simdisk_proc_ops, dev);
 	return 0;
 
 out_alloc_disk:
diff --git a/arch/xtensa/platforms/xtfpga/setup.c b/arch/xtensa/platforms/xtfpga/setup.c
index 829115bb381f..4f7d6142d41f 100644
--- a/arch/xtensa/platforms/xtfpga/setup.c
+++ b/arch/xtensa/platforms/xtfpga/setup.c
@@ -24,6 +24,7 @@
 #include <linux/of.h>
 #include <linux/clk-provider.h>
 #include <linux/of_address.h>
+#include <linux/slab.h>
 
 #include <asm/timex.h>
 #include <asm/processor.h>
@@ -56,22 +57,6 @@ void platform_restart(void)
 	/* control never gets here */
 }
 
-void __init platform_setup(char **cmdline)
-{
-}
-
-/* early initialization */
-
-void __init platform_init(bp_tag_t *first)
-{
-}
-
-/* Heartbeat. */
-
-void platform_heartbeat(void)
-{
-}
-
 #ifdef CONFIG_XTENSA_CALIBRATE_CCOUNT
 
 void __init platform_calibrate_ccount(void)